1 Technical notes on version 2.4
6 kes Clear in-use bit on vol when unused while swapping.
8 kes Remove sleep at end of ./bacula
9 kes Clear hash packet for hardlinked files correctly. This corrects
10 a long standing bug where hardlinked files selected individually
11 would occasionally not be restored.
13 kes Apply Eric's patch to ensure that autoprune does not return
14 a Volume not in the autochanger unless requested to do so.
15 kes Correct bat restore display of multiple drives. This fixes
17 kes Do find_a_volume() each time an unload is done. This
18 fixes the failure of maxvol2-test.
20 Release Beta version 2.4.1-b2
22 kes Use Qmsg() in job.c watchdog callback.
24 kes Release main control rwlock if ABORTing.
25 kes Make watchdog connect timeout queue messages rather than sending
26 directly to avoid lock conflicts with the real thread.
27 kes Remove const char that causes problems with Python, which has
28 older 'incorrect' headers.
29 kes Add const char in dbd.c to avoid compiler warnings.
31 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
32 mt. This fixes bug #1116.
33 kes Fix failure of 2drive-concurrent-test. Always read label;
34 clear_unload() only after drive is defined in acquire_for_read().
36 Release Beta version 2.4.1-b1
38 kes Back out bad src/lib/base64.c change.
40 kes Generally clean up the manual tape loading code. The main
41 conceptial change is that when a volume is marked to be unloaded,
42 its volume name is retained, and it is only marked as unloaded
43 when either the autoloader says it is unloaded or another tape
44 is read on that drive.
46 kes Fix a recycling problem with two autochangers reported in bug
47 #1106. This may also (unlikely) fix a second recycling bug as
49 kes Fix a SD lock volumes deadlock problem reported in bug #1100.
51 kes Fix format problem in bscan output reported in bug #1105.
53 kes Copy more data when restarting a job so that run
54 overrides are kept. This should fix bug #1094.
55 kes Backport updates to jobq.c where possible.
57 kes Fix bug where SD did not ask operator if the device could not
58 be opened. Reported by Eric.
60 kes Add dbuser to DIR conf file (replaces user).
61 kes Add --with-db-password to ./configure
62 kes Fix regress to handle db_password.
63 kes Fix a couple of pedantic compiler warnings.
64 ebl Fix bug when starting a restore on a storage that doesn't
65 have the requested MediaType.
67 kes More work on word alignments -- eliminate all ints from
68 the configuration routines.
70 kes Fix bug reported by Scott Barninger where the bacula script
71 refers to scripts in the wrong directory. Needed to meet the
72 requirements of recent FHS location changes.
73 kes Fix word alignment problem on non-Intel 64 bit machines
74 such as Solaris. This should fix bug #1097 -- bus error in SD.
76 kes Add missing win32/patches/wxWidgets.patch to 2.4 repository.
80 kes Update version to reflect the magnitude of the SD changes.
82 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
85 kes Add create_postgresql_database.sql to Win32 installer. Should
86 fix problem reported by Juilio Monteiro.
87 kes Get correct slot when auto unloading a device. This fixes bug
90 kes Fix multiple media restore.
91 kes Make DEVICE Slot private and access it via a method.
92 Allows better control over when it is set and cleared.
93 kes Fix possible seg fault if SQL error.
95 kes Add debug code to SD.
96 kes Fix renaming a Volume, which used the wrong Volume name.
98 kes If operator has rewind tape, print warning, release tape and
99 try once more. If tape is positioned somewhere, something went
100 wrong, so mark the tape in error and try once more. Previously
101 this error was fatal, now it produces an error message.
102 kes Ensure correct volume name displayed during restore
103 kes Ensure that Volume is mounted for restore.
105 kes Fix a few more Coverity reported problems.
107 Beta Release Version 2.2.10-b4
109 kes Enhance a couple of SD debug messages.
110 kes Tweak unload flag setting and ensure it is set during swap.
112 ebl Fix #1091 about bad output in estimate command.
114 kes Modify autochanger locking to attempt to avoid race
116 kes Make sure device not busy before doing label command.
117 kes Display open() errors except when polling. Previously too
118 many were suppressed. This should fix bug #1070.
119 kes Fix Win32 reparse points. Bacula will not recurse into any
120 reparse point directory, including mount points, unless the
121 directory is explicitly mentioned at the top level (same as
122 with Unix). A file that is linked to another file will be
123 backed up -- much as Unix does for hardlinked files.
124 This fixes bug #1041.
126 kes Remove double quotes from ChangeLog and ReleaseNotes
127 kes Remove StorageId test when pruning and recycling (Eric's changes).
128 kes Remove old form of locking when getting volumes -- causes deadlock.
130 kes Fix buffer overruns detected by Coverity.
132 Beta Release Version 2.2.10-b3
134 kes Tweak joblog display.
136 kes Implement --without-qwt
137 kes Fix layout of restore tree dialog
138 kes Add configure bat QWT libraries, so that bat can be built
139 with or without the QWT libaries.
141 kes Apply batfix bat cleanup patch from Riccardo.
142 kes Make sure we unload the right slot when swapping.
144 kes Improve SD reserve debug code.
145 kes Testing an improvement to free up volumes no longer in use.
147 Beta Release Version 2.2.10-b2
150 kes Rework SD acquire for read to handle autochanger Volume
152 kes Implement regression that explicitly tests swapping a Volume
153 from one drive to another.
154 kes Enhance disk-changer to detect most error conditions.
155 kes Fix SD code so that it properly swaps a Volume between drives.
156 This fixes bug #1083.
158 kes Prevent a Volume that is being swapped from being freed from
159 the volume list. This will most likely fix, at least partially,
161 kes Fix strippath so that it does not get a buffer overrun and crash FD.
162 This fixes bug #1078.
163 kes Make inability to change owner/group when creating a dir only a
164 warning rather than an error.
166 ebl Fix SQL query in migration code
168 kes Force unload of volume when wrong volume mounted in SD.
170 kes Fix bat seg fault at termination.
171 kes Add Bacula generated version to bat about box.
173 Beta Release Version 2.2.10-b1
175 kes Permit multiple simultaneous restores -- experiment.
177 kes Backport development stream SD reservation system changes.
180 kes Move final volume swapping code to DCR method and
181 call it from acquire_for_read().
182 kes When wrong volume is mounted during read, unload_autochanger.
184 kes Stop searching for Volumes in SD askdir if DIR returns the
185 same volume name twice in a row.
187 kes Tweak the swap Volume from one drive to another code so that
188 it now seems to work.
189 kes Resolve several problems with recycling that broke the new
190 code (these problems are in 2.2.9 as well).
191 kes Remove the volume lock when calling the sysop code.
192 kes Don't mark a reserved volume with no writers as unused otherwise
195 kes Rework class structures for VOLRES, DCR, and DEVICE to make
196 the method names a bit more logical, and for more logically
197 handling the responsibilities.
199 kes Remove redundant code in terminating the scheduler that just
200 causes a seg fault in many cases.
201 kes Cleanup releasing a volume and make it a DCR method.
202 kes Improve algorithm for detecting pre-reserved volume and
205 kes Tweak volume swapping code so it works.
206 kes Correct name overloading in mount.c
207 kes Replace released flag in VOLRES with reserved and add access
208 methods for the VOLRES class.
209 kes Prevent volume from being released while being swapped.
210 kes Refactor parts of stored/mount.c
212 ebl Add sanity checks for VolWriteTime and VolReadTime
213 ebl Take care of bad clock changes while computing VolWriteTime
214 and VolReadTime. This should fix or limit #1066
215 kes Correct error string numbers in dird/catreq.c
216 kes Restructure reserving, acquiring, and mounting volumes. Calls to
217 autochanger are deferred for mount.c -- simplifes the code.
219 kes Do not prune any running job. It just fails the job.
220 kes Lock the volumes when changing dev->reserved_device and marking
221 the volume unused otherwise the device can get reserved by
222 another job before the volume is released, thus blocking it.
225 Beta Release Version 2.2.9-b7
227 kes Close bat console windows first to eliminate error message
229 kes Remove useless code in Scheduler that causes seg fault on
231 kes Correct some SD catalog request error messages.
232 kes Don't allow pruning of any running job.
233 kes Turn off code in read_record that causes a seg fault in the SD
234 when reading past an EOS_LABEL.
235 kes Turn off unloading the autochanger in reserve.c as it just
237 kes Lock volumes when unreserving a device.
238 kes Do not mark volume unused when recycling.
239 kes When acquiring, don't mark volume unused if it is reserved (busy).
241 Beta Release Version 2.2.9-b6
243 kes Eliminate ./configure warning on po directory
244 kes Fix bug #1063, reuse of freed ptr in list nextvol.
245 kes Release regex compile buffer in filed/job.c
246 kes Add proper type of const char in sql_create.c
247 kes Turn off debug in daemon termination routines
248 kes Move free_volume_list() before devices are freed in stored.c
249 kes Fix reference to uninitalized stack variables in bregex.c.
250 This should correct bug #1067.
252 kes Fix possible seg fault in SD when freeing a volume entry.
254 kes Apply patch from bug #1069 that corrects spurious error messages
255 when ACLs enabled on SGI but no ACL exists.
256 ebl Fix a storage deamon segfault at debug level 500.
258 Beta Release Version 2.2.9-b5 -- not released
260 Beta Release Version 2.2.9-b4
262 kes Re-enable code to remember last volume mounted on a non-tape
264 kes Add patch supplied in bug #1068 that fixes a SD crash when using
265 a Virtual autochanger.
266 kes Generate correct JobMedia records during spooling/despooling when
267 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
268 <tih@hamartun.priv.no> for excellent analysis and testing.
270 Beta release Version 2.2.9-b3
272 kes Rework certain SD locking based on gdb tracebacks of deadlocks
273 sent by Eric. This code now uses only the volume_lock() rather
274 than the reservations lock when at EOM and acquiring a new
276 kes Ensure only one exit point in several subroutines.
278 Beta release version 2.2.9-b2
280 kes Fix to initial tape drive open to release the volume name
282 Beta release Version 2.2.9-b1
284 kes Fix to JobMedia fix.
285 kes Fix bug pointed out by Peter Much that causes the StorageId to
286 be updated when reading a tape (during migration, it could have
287 been incorrectly set to the write StorageId).
289 kes Implement autostart scripts for Debian
291 kes Fix mtx-changer.in for broken Debian mt program.
293 kes Massive commit of all fixes and back ports to create 2.2.9
295 kes Apply doc fix from bug #1062.
296 kes Resolve crash and improper restore wx-console Win32 restore
297 GUI. Fixes bug #1065.
298 kes Update Win32 wxWidgets to latest version.
299 kes Attempt to do correct handling of Win32 mount points. Should
301 kes Fix Win32 FD backup/restore memory leak due to improper termination
302 of BackupRead/Write. This fixes bug# 1038.
303 kes Add const to AIX prototype for initgroups()
305 kes Undo bug #1047 heap overrun fix as it is not correct.
307 kes Fix creating first JobMedia record during Migration to include
308 proper index. This caused slow restores of migrated jobs.
310 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
311 and do not strip paths on symbolic links.
312 kes Set catalog backup database and user name from values specified on
313 the ./configure line.
314 ebl Apply patch to correct bug #1031, about wrong pool source information
317 Release Version 2.2.8
319 kes Apply patch from Martin to correct bug #1040, bscan sets existing
321 kes Fixed important spelling error in doc -- bug #1045.
323 kes Move initialization of read/write res lock earlier in the code.
324 This fixes the crash with a null conf file. This fixes bug
326 kes Redefine CURES in lib/parse_conf to be URES and move it all
327 into lib/parse_conf.c -- this responds to bug #1042, but does
328 not fix it. The fix is not to compile with FORTIFY_SOURCE.
329 kes Backport fix de-referencing a NULL pointer in the scanner from
330 the trunk SVN. I don't think this was reported as a bug.
332 Beta release Version 2.2.8
334 kes Re-enable the new job code editing (%f).
336 kes Fix bsnprintf for float point numbers. I broke recently when
337 parameterizing some variables. This fixes bug #1036.
339 kes Move Heartbeat documentation from Job to Director resource.
340 This fixes bug #1033.
342 kes Fix existing switch drive SD code to call autochanger to release
343 any old volume. This must be done to keep the autochanger from
344 releasing subsequently newly reserved volumes in doing a close().
345 This should possibly fix bugs #1032 and #1018.
346 kes Apply big backport of current SVN SD code that corrects a number
347 of race conditions. This is a first step in fixing bug #1018.
349 ebl Fixes bug #1028 where "Selection Type" option was not usable
353 Release Version 2.2.7
355 kes Partial back out (disabled) %f job code editing because it
356 does not build on Win32.
357 kes Fix seg fault Frank Sweetser reports in regression testing
358 on his systems. The problem was that the original author of
359 bsnprintf.c did not take into account the side effects of
360 using ++x in the argument to a #define.
362 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
363 that implements double quoting include names in conf files,
364 and also allows piping input by having the first character
365 be a vertical bar (|).
366 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
367 that implement %f in RunScripts to pass the FileSet name.
368 kes Skip leading | when lex input comes from a pipe as suggested
369 by Michael Stapelberg <michael@stapelberg.de>.
371 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
372 Nerijus Baliunas <nerijus@users.sourceforge.net>
374 kes This patch corrects a problem where the maximum concurrent storage
375 jobs counter gets out of sync during restore jobs causing jobs to
376 'wait on max Storage jobs'. This patch fixes bug #1009.
378 kes Add new include to postgresql.c suggested by Marc Cousins so
379 that it compiles correctly with pgre version 8.3. Also fix
380 misuse of %x with pointer (should be %p).
382 kes This patch fixes bcopy so that it produces correct Volumes.
384 kes This patch eliminates spurious output to the console during a VerifyVolume
385 job that contains encrypted data. It fixes bug #1024.
387 kes This patch prevents the 'status dir' command from trying to use a scratch
388 volume and possibly moving it from one pool to another. This patch fixes
391 kes Fix --archivedir addition to configure. Replace it with
392 --with-archivedir in configure.in This fixes the regression
394 kes This patch fixes bug #1012 where the job is canceled because
395 of Max Run Time exceeded when the job has not yet started.
397 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
398 one 'part' to write. Instead of each part being stored on disk,
399 written to DVD, then deleted from disk, all parts are written to disk,
400 and only the last is written and deleted from disk.
402 kes Correct typos in disk-changer.in
404 kes This patch fixes the status command to include the formating string for
405 JS_AttrInserting. It fixes bug #1021.
406 kes This patch should fix the Mac OS X build problem on the latest
407 Darwin, where sys/types.h was not included correctly (apparently
408 due to a change in the Mac headers). The solution was to explicitly
409 ensure that it is defined for the ./configure.
410 This patch also has a rebuild of configure that includes the Debian
411 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
412 kes This patch should ensure that queued messages to the console are
413 displayed as soon as possible. It should fix bug #1007, but has been
414 reported not to work.
416 kes This patch fixes the infinite loop when trying to increase the
417 maximum number of volumes in a Pool during the add command.
418 This patch fixes bug #1008.
420 Release Version 2.2.6
422 kes Get fix for joblist bug in bat from trunk.
424 kes This patch fixes bug #1003 where putting the message output from
425 a Verify job into the catalog results in a recursive loop. The problem
426 seems to show up only with postgresql (to be verified).
428 kes Fix bug #942 where lots of emails where generated when the heartbeat
429 interval was low and Bacula wanted a different tape from the one in
432 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
433 which was updated during a restore (or a reading migration) bug #982
435 ebl Use qmake-qt4 instead of qmake when available (debian system).
437 kes Add a security warning to src/cats/make_catalog_backup.in indicating
438 that passing the password via the command line (arg 3) is insecure.
439 This responds to bug #990 (it doesn't fix it).
440 kes Apply 2.2.5-postgresql-errors.patch
441 kes Remove unneeded File table index on JobId, which is already
442 present as the first index of another multi-index.
444 kes Set default debug_level to zero. This corrects bugs #991 and #993.
445 kes Fix a crash in bat when it cannot connect to the Director for example
446 if the Director is not running.
448 kes Activate Close button on tray-monitor window. This fixes
451 kes Fix spurious warning message printed when creating a volume with
452 a LabelFormat. This fixes bug #976.
454 Release Version 2.2.5
456 kes Add JobId in place of Job name in all the Jmsg() output.
457 kes Correct the APP_DESC for the Win32 storage service (remove an e).
459 kes Add new SD despooling attributes and Dir inserting attributes
460 job status codes. This fixes bug #961.
461 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
463 kes Fix doc issue. This fixes bug #963.
464 kes Fix listing performance problems in bat. Pointed out by
466 ebl Fix replace on restore. This fixes bug #969
467 kes Fix bat code that tests for Win32. This should fix bug #968
468 kes Query 5 list wrong Vol after migration. This fixes bug #960
470 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
471 in back porting from 2.3.x
473 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
474 The details are included in the notes in this file.
476 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
477 messages; it fixes a problem opening the SQLite3 database when multiple
478 simultaneous jobs were running; it fixes a bug with certain versions of
479 MySQL where batch inserts failed because of table name character case
480 (upper/lower) differences.
481 kes Fix race condition that drops final block written to volume.
482 This happens in rare cases with multiple simultaneous jobs
483 when the Volume fills. This fixes bug #964. May be related
484 to bug #935 and possibly #903.
486 kes Fix FD->SD authorization failure, which was due to spurious
487 wakeups from a pthread_cond_timedwait(). Simply check the
488 predicate before continuing. This fixes bug #953
489 dvl Add new configuration item --archivedir
490 dvl Adjust regression tests to use tmp not /tmp. This will allow
491 multiple concurrent runs of the regression tests.
493 kes Eliminate more strerror() and replace with bstrerror().
494 kes Remove BSD getopt and replace with unrestricted IBM version.
495 kes Fix Win32 build for changed calling sequences.
497 kes Fix FD->SD authorization failure, which was due to spurious
498 wakeups from a pthread_cond_timedwait(). Simply check the
499 predicate before continuing. This fixes bug #953.
500 kes Add const char where needed (more to do).
502 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
503 kes Don't overwrite error message in check_tables_version.
505 kes Unlock batch insert tables with same calls used elsewhere.
506 kes Allow starting 59 jobs a second.
507 kes Make SD session key more random.
508 kes Add retry for SQLite opening db if it fails. Probably helps
510 kes Suppress extra error messages during batch insert failure.
512 kes Put some FD auth code on dbglvl rather than fixed.
513 kes Return insert attributes error message in db msg buffer to avoid
514 false error messages. Helps fix bug #966.
515 kes Separate batch init error messages. Probably helps fix bug #966.
516 kes If Dir gets an error during inserting attributes, cancel SD.
517 This reduces unnecessary error messages.
519 ebl Cleanup batch insert code. Probably fixes bug #965.
521 kes Turn off some code when batch insert not enabled.
522 kes Edit FD name in connect error messages.
524 kes Add code to handle tray monitor separated from Win32 FD.
525 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
527 kes Fix ANSI tape labeling. This fixes bug #954.
528 kes Increase the max block size to 4MB fixes bug #957.
529 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
530 is not properly mounted (recognized) during a poll.
531 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
532 Job that has differences reports Verify OK.
533 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
535 Release Version 2.2.4
537 kes Increase size of name string when FD making connection to SD.
540 kes Add waits to multiple exit detection code to try to force pid
541 file to always be deleted.
542 kes Restore good dev.tar.gz to rescue set appropriate binary property.
544 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
545 trying to switch drives by checking for blocking before unblocking.
547 kes Cancel storage daemon in all cases where FD reports error. This
548 should fix virtually all cases of bug #920.
550 kes Fix error message that was clobbered when Dir tells SD it does not
551 have write permission on Volume. This should fix a minor point
552 in bug #942, but not the main problem.
553 kes Add code to cancel job in SD if FD connection fails. This should
555 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
556 kes Fix migration code to get correct Volume name with multiple volumes
557 by skipping |. Fixes bug #936.
558 kes Implement patch supplied by Landon to fix bug #944 where using
559 TLS with bconsole uses 99+% of the CPU.
560 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
562 kes Move patches into patches directory.
564 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
567 ebl Using 'm' in bconsole will show messages like before,
568 and not memory usage.
570 Release Version 2.2.3
571 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
574 kes Fix bug #935, and probably also bug #903 where files were not
575 restored. MediaId was not properly set in JobMedia record after
578 kes Add ./configure search in qwt-qt4 for qwt package
579 kes Apply Martin Simmons patch that should turn off the new API usage
580 when batch insert is turned off allowing building on older
583 Release Version 2.2.2
585 ebl Detect if new PosgreSQL batch insert API is present.
586 kes Correct incorrect mempool call causing Director crash.
587 sb Update spec files for 2.2.1 release
589 Release Version 2.2.1
591 kes Update POTFILES.in
592 kes Cleanup a few underquoted AC_DEFUNs in configure
593 kes Apply patch from Martin Simmons that adds a test for va_copy to
596 kes Fix bug #921 by increasing the number of tries to create a new volume
598 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
599 can be called multiple times. Implement a version for machines
600 without va_copy() that gets a big buffer.
602 kes Integrate more portable zone offset code into bsmtp.c
603 Submitted by Attila Fülöp.
605 kes Fix bad SD->FD return status reported by
606 (James Harper) <james.harper@bendigoit.com.au>
607 ebl Fix a bug in read_close_session which return random status
608 thanks to James Harper
610 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
611 and directory names during restore of single file/directories.
612 kes Add sanity checks to .sql command when string is empty. Hopefully
613 that will resolve Dirks Director crash.
615 kes Apply patch submitted by Martin Simmons that corrects a seg fault
616 in the bsmtp chat subroutine when debug is >= 10.
618 kes Fix Director crash when running bat SQL queries.
619 kes Add David's notes on Item 8: Copy pools.
621 kes Rework projects file to be current and ready for a vote.
622 kes Enhance lex scanner error message.
624 kes Tweak LICENSE file to mention BSD code.
625 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
626 if specified on the ./configure.
627 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
628 This class is intended to allow us to open a second bsock to the
629 Director while in the restore subdialog.
631 kes Fix configure to create bat Makefile before creating dependencies.
632 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
633 kes Add a tooltip to the tray monitor.
634 dvl Set the Director's PID file before dropping privs. This fixes
637 kes Update AUTHORs file
638 kes Increase the default max concurrent jobs to 20 in FD and SD to
639 correspond with the default .conf files.
640 kes Rewrite the Win32 service routines. This eliminates the 3 copies
641 some different, of the same file created by RN when porting the
643 kes Rearrange some of the Win32 directories and the placement of the files
645 kes Set DEVELOPER flag in version.h
647 ========================================================================
648 Release Version 2.2.0
650 kes Apply a second doc patch from Marc.
651 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
652 improves the tips section that discusses how to setup multiple
655 kes Update bat README file.
656 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
657 corrects a typo in the Recycle status check in db_find_next_volume().
658 This will probably fix a number of annoying problems with multiple
660 kes Modify most of dird/msgchan.c to use bsock class calls rather than
661 bnet calls -- no functionality change.
663 kes Modify the Verify output to specify if files are missing on
664 the Volume(s) or disk. Fixes confusion in bug #916.
665 kes When more than one Volume is read in a migration job, the last
666 Volume bytes reported are from the last read volume rather than
667 the last written volume. Fixed. This fixes bug #910.
668 kes Fix display of Recycle flag after update volume=foo recycle=yes.
669 It previously printed New Recyle flag is: no. This fixes bug
672 kes Correct seg fault when switching tape drives during restore.
673 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
674 be used until after 2.2.0 release.
676 kes Remove fnmatch() in SD that permitted wild card specifications.
679 kes Fix %g in filename returned by SQL for browse tree reported by
681 kes Fix configure so that it puts config.out in the cwd rather than
683 kes Attempt to fix the locking problem reported by Eric in bug #906.
684 kes Make berrno class to leave errno unchanged after constructor call.
685 kes Make bnet_server use the heap rather than the stack to allocate
686 its socket fd pointers to avoid a crash at termination. Problem
687 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
689 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
690 and putting it in depkgs-qt along with Qt4.3.
692 kes Rework code in acquire.c that switches drives for reading when
693 the Media Type does not match. This should fix bug #906
695 ebl Fix a director segfault during job setup #907
696 kes Correct seg fault in postgresql when first operation returns no
697 rows. Fixes Dirks File browser problem seg fault with bat.
699 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
700 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
703 kes Implement PopUp YES/NO dialog for bat.
705 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
707 kes Correct RunScript to terminate job in FD on failure.
708 kes Change abort_on_error and AbortJobOnError to fail_on_error
709 and FailJobOnError in RunScripts.
710 kes Minor tweaks of code formating in RunScripts, principally to
711 avoid depassing 80 columns.
713 kes Eliminate one #ifdef Win32 in bsmtp
714 kes Implement grow tool to grow a file for testing very large databases.
715 kes Add big-vol-test to test Bacula seeking with > 5GB.
718 kes Modify find_next_volume() to return all values in Media record.
719 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
723 kes Update Release notes
725 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
726 Warning, in previous beta version, all media get from scratch keep their
729 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
730 This should fix bug #842. Made a note to look at removing the temp
731 files at the end of the install.
732 kes Add ability to mount and unmount a file device providing it is
733 marked as being removable and has the appropriate mount and unmount
734 commands defined in the Device resource. This fixes bug #830.
735 kes When applying a storage override, release all previous storage
736 definitions rather than just prepending the new storage.
737 This should prevent a good deal of confusion.
739 kes Implement ./configure search for qwt libraries.
741 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
742 Win32 FD. This should fix bug #893.
743 kes Remove an unnecessary beep in Win32 init code.
744 kes Update copyright dates in Win32 executable about boxes.
745 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
746 code with a BSD getopt.c and getopt.h.
747 kes Remove sched.h from the Win32 compat directory -- not used.
748 kes Remove the Exit menu item from the Win32 tray monitor. If you really
749 need to shut it down, do it through the services panel or the command
751 kes Remove some inappropriate Bacula FSFE copyrights.
752 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
753 kes Fix regress config non-portable test as pointed out by
754 Florian Heigl <florian.heigl@gmail.com>
755 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
756 as pointed out by Florian Heigl <florian.heigl@gmail.com>
758 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
759 Reported by Frank Sweetser.
763 kes Fix client-only build.
764 kes Integrate client-only fixes for bsys (initgroups) and conio from
765 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
766 kes Make arguments to get_scratch_volume() in same order as other
768 kes Rework the prune_volumes() subroutine so that after purging and
769 no volume found in desired pool, it will check for a scratch
770 volume. This prevents recycling the whole scratch pool.
771 kes Add code to status storage to print boffset_t (largefile support).
773 kes Move qwt (Graphics libarary for Qt4) to depkgs.
774 kes You now need a --with-qwt=<dir> to be able to build bat.
775 kes Update src/win32/cats/bacula_cats.def to include the new
776 db_get_query_dbids() call on Win32.
778 kes Correct a problem when selecting a scratch volume and moving
779 it to another pool that lost some columns.
780 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
781 kes Enhance Autochanger error messages to include Volume and device name.
782 kes Rework prune_volumes() code to take account of InChanger flag,
783 and to handle recycling volumes going to the Scratch pool and
784 current pool because the RecyclePool directive.
785 kes Implement a better and more efficient db_get_query_dbids() to
786 handle creating and passing back a list of DBIds.
790 kes Start work on new more efficient DBId subroutine. First use
791 will be for recycling volume to Scratch inchanger.
792 kes Increase number of JobIds in pruning from 1000 to 10000.
793 This to be replaced by above routine.
794 kes Begin implementation of building Qt4 on Win32.
795 kes Correct typo in fix I added for bad TLS shutdown.
796 kes Pull 2.0.3 patches into patches directory.
797 kes Update Release notes. Include qt-console in line count.
798 kes Update Projects file.
800 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
801 bug in migration code where a job that spanned two volumes
804 kes Implement new BST_DESPOOLING blocked state. Change from locking
805 during despooling in SD to blocking. This means that other threads
806 can work with the device structure, in particular the reservations
807 system while despooling.
809 kes Fix return in reservation message queue that missed clearing
810 the jcr lock (implemented 26Jun07 below).
811 kes Rename a number of dev methods to make locking function names
813 kes Document locking in lock.c. Move lock structures to new file
816 kes Move reservations message lock to lock jcr only this
818 kes Move main SD locking code into lock.c (new file).
819 kes Update Win32 build to include lock.c
823 kes Dirk committed the qwt library code for drawing graphs in bat.
824 kes Tweak install of qwt so that it is integrated with ./configure.
826 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
827 out by Eric (my typo).
828 ebl Fix configure.in to get batch mode enable
829 kes Return correct string from authenticate.cpp in bat when connecting
831 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
832 spurious line drops when using TLS.
833 kes Do not file reparse points when restoring a file that already
836 kes Implement Windows reparse points -- similar to directories, but
837 we do not descend into it. This is a first cut. They seem to
838 be backed up, but restore is not yet tested.
839 kes Remove restore_blocking in tls code when shutting a socket to leave
840 it in blocking mode. Hopefully this will fix the encryption bug
841 reported by Frank Sweetser.
842 kes When opening a file for backup, tell the OS that we are going to
843 read it sequentially -- optimization.
844 kes Change variable names in authenticate_director() to not conflict
845 with member names in bat. Caused great confusion with compiler,
848 kes Queue openssl error messages in case of comm problem.
849 kes Do shutdown() call if socket terminated.
850 kes Remove some duplicated code in tls.c
851 kes Move more of the bsock member variables into private and access
853 kes Add Frank Sweetser's tls-test to the regression suite.
855 kes Add Swedish sv.po file
857 kes Don't print clock skew message in FD if less than 3 seconds diff.
858 kes Add a bit of VSS info to status client.
859 kes Implement a first cut of Vista VSS, using Win2003 code.
863 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
864 loaded tape but uses first drive).
865 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
866 This was indeed a Win32 issue.
868 kes Simplify search of autochanger for in-use Volume.
869 kes Fix exit condition of check for in-use volume. kes Remove
870 inappropriate my_postgresql_free_result() in db_close()
872 kes Fix bad return in FD when encryption signature not found.
873 Probably caused a crash.
874 kes Inhibit missing encryption signature error messages for
875 file types where no signature computed.
876 kes Correct inverted check on autochanger in reservation system.
877 kes Tweak debug code in autochanger reservation.
879 kes Add some additional locking in the cats directory in subroutines
880 that modify packet variables called from batch insert.
881 kes Rework how dcrs are allocated. new_dcr() can now be called
882 with an existing pointer, and it will simply clean it up.
883 This allows the reservation system to test various different
884 devices, and will permit easy device changes.
885 kes A bunch of changes all over to handle new new_dcr() calling
887 kes Work more on the Volume management in the SD. Remember Volumes
888 for tape drives and for autochangers (even virtual disk changers).
889 kes When looking at the Volume list to reserve a drive, handle
890 autochanger names correctly by interating through the changer
891 devices. Also call the Director to see if a Volume is suitable
893 kes Fix some bugs in bscan. Make sure all media records are written.
894 Make sure that valid JobMedia records are written for disk files.
895 Previously they were completely wrong.
896 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
897 that the URLs don't change and so that the developers will all
898 work off the same copy. Rebuild from scrach.
899 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
903 kes Fix seg fault in FD from incorrect digest size.
904 kes Fix argument to non-OpenSSL crypto.c subroutine.
908 kes Remove a few malloc()s from the encryption code.
909 kes Use the class calls to bsock in filed/backup.c and restore.c in
910 place of the old bnet_xxx code.
911 kes Implement code that does an on the fly calculation of the
912 signing digest during restore of encrypted files. It makes
913 a best guess at the algorithm, and if it is not correct, will
914 then revert to the old code which reads the file after it is
916 kes Implement at least one missing crypto stream in stream_to_ascii()
917 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
918 #877 where a reload with bad syntax causes Dir to exit.
920 Cut: 2.1.14 beta (not released)
922 kes Do not free a volume on a tape drive until another volume is
923 mounted and read, or the autochanger unloads the volume.
924 This should help the SD re-use volumes that are already mounted,
925 and should fix bug #886.
926 kes Apply patch from user brettedgar that allows gnome2-console include
927 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
928 kes Apply patch from Lucien Weller that fixes day of week calculation
929 because of DST flag problem. Fixes bug #887.
931 kes Move find_next_appendable_volume() to after acquiring a valid device
932 in reserve.c. This fixes bug #864 -- confirmed by reporter.
934 kes Unable to reproduce bug 872. However added additional testing for
936 kes Bug #874 resolved by documenting SQLite limitations.
937 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
938 kes Bug #881 resolved by removing typo in mtx-changer script.
939 kes Made Frank Sweetser's wiki the official Bacula wiki with his
940 approval. Added a link to the wiki on the web page, and implemented
941 a backup from http://paramount.ind.wpi.edu
943 kes Fix update allfrompool to pass pool name.
945 kes Convert to pure GPL v2 license.
946 kes Fix sscanf problems reported by Peter Buschman that caused
947 a bus error on Solaris.
948 kes Rework (simplify) the select prompt in bat.
949 kes Move get_jobid_from_tid() into lib and create a
951 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
952 should definitely fix the problem of lost error messages in the
954 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
955 kes Eliminate tcpd.h from the project. Enclose the #include from the
956 library with extern C ...
957 kes Add print of signal name when a signal is trapped.
961 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
963 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
964 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
965 makes SQLit3 run 30 times faster, though a bit less safe.
966 kes Implement --with-batch-insert in configure and detection of thread
967 safe libraries. It is on by default, but turned off if no thread
968 safe library (e.g. SQLite 2) is available.
970 kes Fix Bacula PostgreSQL buffer overruns.
971 kes Do better checking for NULL results returned from PostgreSQL;
972 implement retry for failed queries; clear results buffer after
973 failed query. Hopefully this will correct the PostgreSQL failures.
975 kes Implement algorithm to handle only one appendable volume with
976 Prefer Mounted Volumes = no.
977 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
978 returned from a query.
979 kes Make volume lock recursive.
980 kes Implement an additional volume reservation algorithm that
981 starts by considering all reserved volumes then uses the
982 old brute force algorithm of searching the resources to
983 find a suitable device.
984 kes Add new reservations debug code and refine the old code.
985 kes Update the win32/dll/bacula.defs file.
987 kes Tweak reservations algorithm to permit a few more cases, i.e.
988 volume reserved, but on different drive, ...
989 kes Enhance SD status to include Pool and Media Type for drive in a
990 more readable format (a bit longer).
991 kes Fix PostgreSQL double free.
993 kes Minor refactoring of restore decryption code.
994 kes Add code to smartall.c to detect double free of a buffer.
996 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
997 so that bsmtp will create a correct email address (mailbox only).
998 kes Modify 'memory' command so that the buffers are listed as 'In use'
999 to avoid confusion with Orphaned buffers.
1000 kes I reworked the OpenSSL include/lib flags to be handled in
1001 the standard Bacula way, which should fix bug #863 concerning
1002 non-standard OpenSSL libraries.
1004 kes Implement Help Browser window for bat.
1005 kes Fix reload bug that reset StorageId to zero.
1007 kes Fix TLS #ifdefing when TLS turned off.
1008 kes Ensure that when labelling a tape with Slot=0 that InChanger
1010 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1012 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1013 add DISTINCT (required by PostgreSQL).
1014 kes Implement BSOCK authenticate_director() method. Eventually will
1015 authenicate all daemons.
1016 kes Move several more functions into the BSOCK class.
1018 kes Add code to tell the OS that we no longer need a cached
1019 file that we were reading. In findlib/bfile.c. Also,
1020 only cache files that we are reading. Thanks to
1021 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1022 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1023 kes Implement script to automatically generate cats and dll .def
1024 files for Win32 dll.
1025 kes Update README.mingw32 to include new .def file generation.
1026 kes Correct typo in UTF-8 error message as reported by:
1027 jhernandez <julianhernandez@gmail.com>
1028 kes Add additional sm_check() code on debug level 1.
1029 kes Set default debug level to 1.
1030 kes Trap SIGABRT in attempt to get traceback.
1032 kes Reduce bat connect timeout from 30 to 15 seconds.
1033 kes More restructuring and implementing BSOCK class in place of
1035 kes Remove a few unnecessary malloc() tests in crypto code.
1036 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1037 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1038 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1040 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1042 kes Fix Verify InitCatalog. The attributes were not pointing to the
1043 correct saved location.
1044 kes Implement message callback so that GUI is sure to get all
1045 daemon messages. Currently displayed in a dialog in bat.
1046 kes Ignore SIGUSR2 (Bacula timer) in bat.
1047 kes Apply regress patch from bug #859 to allow regress to work
1048 with Solaris compiler.
1050 kes Begin adding TLS support to bat.
1051 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1052 clean up lex.c and make it more readable.
1054 kes Move more bnet functions into the BSOCK class.
1055 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1056 kes Complete change of berrno strerror() method to bstrerror()
1058 Release: 2.1.10 beta
1060 kes Cleanup incorrect email addresses in bsmtp.
1061 kes Make bat display initial messages rather than discard them.
1063 kes First cut of adding .mod to the run command.
1064 kes Implement auto display of messages in bat.
1065 kes Enhanced preferences to allow all Bacula output to be
1068 kes Try to make bsmtp date routines more generic.
1069 kes Fixed bug #856 autochanger documentation.
1070 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1071 kes Add new cats entry point so Win32 builds.
1073 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1075 kes Do better checking for the MySQL 64 bit libraries looking for both
1076 .a and .so libraries.
1077 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1078 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1079 kes Require the thread safe version of MySQL during configure. Thanks
1080 to Andre Noll for pointing this out.
1081 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1082 continuing in migration code.
1083 kes Apply implementation of tray-monitor font derived from gnome-console
1084 submitted by Andreas Piesk <a.piesk@gmx.net>
1086 kes Eliminate important memory loss in SQLite
1087 kes Fixed the batch insert MySQL thread specific data that was not
1088 being freed. See cats/mysql.c:db_thread_cleanup().
1089 kes Fix restore before command.
1090 kes Convert old hdr.name to name() in a few places.
1091 kes Implement update jobid command.
1092 kes Return all time_t dates in db_get_job_record()
1093 kes Stop watchdog in SD earlier.
1094 kes Put Pool just after Storage in please mount message.
1095 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1098 kes Update the po files.
1099 kes Fix Verify InitCatalog by making it cache attributes.
1101 kes Change name bacula-bat to bat for man 1 page to correspond to
1103 kes Check for client and store NULL pointers in status command. This
1105 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1106 kes Fix sign extended editing of %p.
1107 kes Clean out a little old #ifdefing in cats/mysql.c
1109 kes If time diff between DIR and FD is more than 600 seconds convert
1110 INFO message to WARNING.
1111 kes Implement heap size display in status for all daemons.
1112 kes Attempt to fix MySQL db open memory loss (not successfull).
1113 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1114 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1115 Query. This looks like a MySQL but but by doing extra releases,
1116 the memory goes away. This should fix bug #847.
1118 kes When backup fails, cancel SD before waiting for sd termination.
1119 kes If SD is waiting for FD to connect during cancel, wake up the
1121 kes Fix fsf code so that errno is correctly reported.
1122 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1124 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1125 so that Bacula doesn't later stumble into a seg fault.
1126 kes Use the term Restore Client in the restore Job report.
1127 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1128 the original job's FileSetId.
1129 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1130 spooling in migration jobs. Not yet tested.
1131 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1132 reading conf file from a pipe. However, do it with open_bpipe()
1133 rather than popen. Not yet tested.
1135 kes Fix an ugly bug where the VolCatBytes were getting updated
1137 kes Implement bconsole memory command that prints current memory
1138 usage, plus smartalloc dump.
1139 kes Clarify some error messages in backup, admin, and migrate.
1140 kes Shrink label dialog to smaller size.
1141 kes Invert Cancel OK buttons on restore to be OK Cancel.
1142 kes More strerror() to bstrerror() conversions.
1144 kes Start implementing bstrerror() in place of strerror().
1145 kes Stripping path -- seems to work.
1147 kes Prevent door and port files from being restored (mostly
1149 kes Free an unreleased buffer in compat code.
1150 kes Change console Job name from *Console* to -Console- to eliminate
1151 Win32 filename problems. Put Win32 path separator when creating
1152 Console file. This fixes bug #846.
1153 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1155 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1157 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1158 to force Win32 error message.
1160 kes First cut strip path. The data should be passed to the FD,
1161 but nothing is done with it yet.
1162 kes Enhance the digest and signature routines in the crypto
1163 library to accept a JCR and to use it to print error messages
1164 so that they will go in the Job report rather than the daemon's
1166 kes Simplify some of the verify signature code.
1167 kes Simplify a few of the alternative returns in the signature
1170 ebl Use only POSIX regex instead of GNU regex in breg.c for
1171 File relocation. It fix broken freebsd compilation.
1172 kes Convert all other Dir files to use new ua class message
1174 kes Tentative fix for missing digest signature in bug 807.
1175 kes Correct handle problem in new win32_ftruncate routine.
1176 kes Convert ua_purge.c and ua_update.c to use new ua class
1177 message routines for bat.
1179 kes Correct incorrect installation of LICENSE in Win32 installer.
1180 kes Display LICENSE at the beginning of the Win32 install.
1181 kes Attempt to correct the need for the png files to be installed
1183 kes Reapply my bat.conf install script in qt-console. I think I
1184 editted bat.pro instead of bat.pro.in and it was lost.
1185 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1186 the /var/lock/subsys for subsysdir. Also corrects typos in the
1189 kes First cut update job.
1190 kes Correct configure to include qmake of src/qt-console directory.
1192 kes Make restore job yes/mod/no print in one command so GUI works.
1193 kes First cut implementing backup and restore client.
1194 kes Correct editing in Verify output that caused a seg fault.
1196 kes Insure that bat.conf is not overwritten during installation.
1197 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1198 while I was implementing migration in March 2006 !
1200 ebl Cleanup file relocation, using char *RegexWhere instead of
1201 char *where + bool where_use_regexp
1202 kes Update some manpages and add bat manpage.
1203 kes Make a first cut at converting bacula.spec.in for bwx-console
1205 kes Apply patch from John Goerzen to add hostname as fourth argument
1206 to make_catalog_backup script.
1207 kes Fix typos I introduced into bsmtp.c
1208 kes Make pm_strxxx() routines handle input of NULL pointer. This
1209 is to protect from NULL pointers returned from SQL databases.
1210 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1211 kes Add more debug to FIFO code -- fix fifo regression test.
1213 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1214 kes Add thread timer to bnet_connect() to break from OS if wait time
1217 kes Update Win32 build to include new files, new symbols, and
1219 kes Implement socket level heartbeat (tcp_keepidle)
1220 ebl Commit File relocation patch
1221 kes Make bat have 'make install' target.
1222 kes Warn during install if old gnome-console binary found.
1223 kes Warn during install if old wx-console binary found.
1224 kes Add -8 option to bsmtp command line to add content type utf-8.
1225 Fixes bug #809. (Character coding problem in bsmtp).
1226 kes If < is found in target (from, to, cc) then do not enclose the
1227 target in < > in bsmtp. Fixes bug #772 (malformed address).
1228 kes When printing certain items in dbcheck, stop after 300000.
1229 Fixes bug #822. (dbcheck loops).
1230 kes Incorrect status in Dir after waiting for mount with poll set.
1233 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1235 kes Print waiting to reserve a device every 5 mins.
1237 kes Don't call close_part in label.c if tape and relabel.
1238 kes Don't free volume if busy in close() -- should help with
1240 ebl Fix #824 RunScript bug (After script could be execute twice)
1241 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1242 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1243 Add a regression script to test RunScript
1245 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1248 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1249 deprecated. No additional bugs will be fixed, and they will be dropped
1250 in a future release (probably 2.4.0).
1251 kes Change name of wx-console to bwx-console to make it more Bacula
1253 kes Change the name of gnome-console to bgnome-console to make it
1256 kes Some time in March, a Feature Request with patch from Jorj Bauer
1257 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1259 The ability for the director to validate a Client (FD) CN against
1260 an arbitrary set of patterns rather than the hostname, with
1261 A new 'TLS Allowed CN' set of directives which are implemented
1262 in the Client resource. Then pattern matching is used in place
1263 of hostname matching against the Certificate's CN. As an example, we
1264 have certificates which (a) use a local CA, and (b) have a CN of the
1266 kes Add new/changed entry points to Win32 build
1267 kes Create unaccepted-projects for projects that are not accepted.
1268 kes Simplify locking in the reservations system.
1269 kes Add more debug code in reservations.
1270 kes Make sure error condition on reserving a volume is handled correctly.
1271 kes Correct handling of volume_in_use.
1272 kes Correct handling of initializing a device.
1273 kes Move handling of broadcasting releasing a device into release_device().
1274 kes Correct attaching dcr to dev so that it is only done if device
1275 is properly initiated.
1277 kes Locking debug level tweaks in SD.
1278 kes Tweak new Volume code.
1280 kes Add exec external-command [wait-seconds] to bconsole. This
1281 executes the external-command. Note! normally external-command
1282 should be enclosed in double quotes.
1283 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1284 it should normally be off in a production system.
1286 kes Implement die command for SD so that we can force it to dump.
1287 kes Implement SD lock debug code.
1288 kes Implement new algorithm for keeping Volume list in SD. It
1289 is now owned by the device.
1291 kes Implement new code for freeing in use volumes that should
1292 resolve if not all, some of the problems of multiple drive
1293 tape conflicts described in bug 801.
1295 kes Fix gui/bacula-web/images files in svn.
1296 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1298 ebl Fix a bug in batch mode (in string escape)
1299 kes Correct migration prune SQL typo that crept in in a
1300 recent 2.1.x change.
1302 kes Move bnet_despool() into class in bsock.c
1303 kes Modify job report to include director name and Build OS.
1304 kes Move drop root privilege and check_catalog() before fork.
1305 kes Add update database scripts (version 9 to 10) to updatedb directory.
1307 ebl Check size and age of each file after its backup to see if
1308 it has changed during backup, if 'checkfilechanges' is set.
1309 The FD will do an extra check (stat(2)) after
1310 each file backup. mtime, ctime and size are compared with
1311 'before backup' information. If time or size mismatch, an
1312 error message will be generated. You must upgrade FD to use it.
1314 kes Make database name and user configurable
1315 --with-db-name=xxx --with-db-user=xxx
1316 kes Add back database type to message.c for debugging.
1318 kes Implement dir_sql() which issues an SQL query.
1319 kes Modify bat medialist to use dir_sql() and do some minor C++
1320 formatting as well as eliminating a number of pointers, simplifing
1323 kes Fix some of the mtx-changer grep commands for tape label readers.
1324 kes Convert a number of bsendmsg into the appropriate send/warning/error
1325 message class calls.
1326 kes Suppress the using database message in the .sql command.
1327 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1329 kes Add context menu for floating a window.
1330 kes Some minor cleanup and name changes in qt-console
1331 kes Add doing mt setblk 0 in Win32 mtx-changer.
1332 kes Apply Martin's bug fix to move definition of ENODATA for
1334 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1335 sqlite2 and sqlite3.
1337 kes More pruning cleanup.
1338 kes Turn on wait_for_drive by default in mtx-changer.
1339 kes Turn on Batch insert code by default as it now passes regression.
1340 kes Add ./configure --enable-bat to enable building of Bat.
1341 No install yet though.
1343 kes Implement a new .sql command for bat.
1344 kes Implement code to turn off pruning in obtaining the next volume.
1345 Pruning is turned off for the status dir command, but turned on
1346 for SD requests and for the list nextvolume command.
1348 kes Correct Qmsg() that was not updated correctly when committing a
1349 previous change (probably the recent TLS patch).
1351 kes Write new subroutine is_volume_purged() that explicitly checks
1352 if the Volume is purged, and if so marks it as such. This should
1353 resolve problems reported about needing to mount twice to recycle
1355 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1356 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1357 amount of duplicated code.
1358 kes Do volume pruning only for the Media Type desired (reduces pruning time
1359 if multiple Media Types are in the same pool).
1360 kes Implement more detailed info in the Job report for the Bacula version
1362 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1364 ebl Add bbatch tool to bench database and insert mode.
1365 Fix sql quote stuff in batch mode
1366 Fix sql stuff for mysql
1368 kes Correct problems with am/pm scheduling. Fixes bug #808.
1369 kes Implement new prunning code that prunes up to 1000 jobs at
1370 the same time. The same technique can be applied to a number
1371 of other prune/purge subroutines.
1372 kes Add an insanity check when starting a new tape job to ensure
1373 that the tape position has not been changed. If so fail the
1375 kes Fix Win32 build for dlls to add the folllowing:
1376 src/lib/bsock.c -- new file with new entry points
1377 src/lib/dlist.c -- new entry points
1378 src/cats/sql_create.c -- new entry point
1379 src/cats/sql_cmds.c -- new DATA item exported
1381 ebl batch mode cleanup bscan-test is ok now.
1382 kes Implement SD code to check length of disk volume before appending.
1384 kes Correct return status on db_batch... routines.
1385 kes Add call to db_write_batch_file_records() to migration code.
1386 ebl Fix AfterJob timing
1387 kes Move the checking of the database in initializion of the Director
1388 to after we drop privileges. This avoids the need for both root
1389 and bacula access to the DB.
1390 kes Correct a misplaced variable definition in src/filed/backup.c
1391 kes Correct how the new batch insert db_create_attributes_record()
1392 uses the arguments. Caused a seg fault in bscan.
1393 kes Implement lock() and unlock() methods in DEVICE class.
1394 Implement block() and set_block(xx) methods in DEVICE class.
1395 kes Modify bnet_connect() so that it uses time() to check for the
1396 wait time expiring (on some OSes, some system calls may not
1397 return immediately).
1398 kes Modify Verify to obtain the previous JobId when it is actually
1399 running rather than at schedule time (as it was in 1.38.x).
1400 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1402 kes When checking pid in pid file, continue running if the pid is
1403 the same as ours. This occurs on IRIX after a system crash.
1406 kes Extend new GUI API.
1407 kes Make the ua structure a class, and implement send_msg(),
1408 error_msg(), warning_msg(), and info_msg().
1410 kes Apply fix from for building wx-console on the Mac from
1412 kes Implement new select mechanism for GUI programs.
1413 kes Reorganize initialization of stackedWidgets in bat.
1415 kes Add updated nagios plugin supplied by Christian Masopust.
1417 kes More bat implementation.
1418 kes File migrate bug with Pool Occupancy using mediaid instead
1419 of jobids. Fixes bug #795.
1420 kes Fix orphaned buffers in filed backup and verify due to
1421 crypto buffers not freed during errors. Fixes bug #789.
1422 kes Extend new GUI api code to tree commands.
1423 kes Ensure that tree and dot commands check console ACLs.
1424 kes Permit marking directory with trailing slash.
1425 kes Allow 20 console connections (instead of only 10).
1427 kes Add smartctl call to bacula-sd.conf as an example of getting
1430 kes Modify jobq.c to let simultaneous restore jobs run. This may
1431 cause them to fail if they cannot get a drive.
1432 kes Add Client Connect Wait to Storage daemon to permit users to
1433 modify the time the SD waits for a FD connection.
1435 kes Correct virtual changer check which was backwards. This caused
1436 volumes to be unloaded into slots already occupied.
1438 kes Apply Command ACL filter to JobId list in restore command.
1439 kes Correct typeo in var.c patch.
1441 kes Don't let Bacula prune File or Job records for the current Job.
1442 kes Fix variable substitution pad + inc bug reported (with patch)
1445 kes Correct SQLite log table index as reported by Luca Berra.
1447 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1449 kes Begin implementing new comm signals for API.
1450 kes Fix a few places in lib/message.c where the open fd may
1452 kes Continue implementing lib/bsock.c (real class). Make jcr,
1453 who, host, and port private. There are new methods to access
1454 them for non-class use. This required touching a number of files.
1456 kes Add LANG=C to autoconf/randpass so it works with languages other
1457 than English. Fixes bug #788.
1459 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1461 You will not be able to generate Include/Exclude list any more.
1462 It will be fixed soon.
1463 If you want to use this, you can apply
1464 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1466 kes Restore of sockets created false error messages because Bacula
1467 no longer restores sockets, but the code was still trying to
1468 set the attributes on a non-existent file. Reported by a user.
1469 ebl finish RecyclePool feature
1470 Media will takes Pool.RecyclePool
1471 when moving from Scratch to a Pool or when user will do
1472 update volume=xxx frompool
1473 To use it, add RecyclePool = aPool to your Pool resource
1476 RecyclePool = Scratch
1480 kes Expand new BSOCK class adding signal() and new BNET signals.
1481 kes Begin enhancing the dot commands adding a new API function
1482 that returns more information and will make it easier
1483 to interface to the Director from a program.
1485 kes Make DEVICE fd private. Its new name is m_fd, and can be
1486 obtained with dev->fd() outside the class. This is the
1487 first of many DEVICE members to be made private.
1488 kes Implement Michael Renner's idea on having a virtual disk
1489 changer. I made some minor modifications (e.g. I did not
1490 implement the Virtual Changer directive, but simply set
1491 the Changer Command to an empty string.
1493 kes Implement a BSOCK send() method that writes the whole record
1494 in a single write() request rather than in two.
1495 ebl add update volume=xxx recyclepool=yyyy
1496 volume takes recyclepool from pool when using update volume=xxx from pool
1498 kes Fix encryption deblocking bug, which caused some restored files
1499 to be truncated. This fixes bug #763.
1500 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1501 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1503 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1504 ebl Use btime_t instead of uint64_t in media patch.
1506 kes Optimize the use of the database a bit in the Status dir command.
1507 Only open it when needed, ensure that if any previous database
1508 was opened, it is closed.
1510 kes Correct VolCatBytes bug from media patch.
1511 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1512 in the case of orphaned records.
1513 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1514 and File records in 300K chunks to be more efficient. This
1515 idea came from Juan Luis Frances (if I remember right).
1516 kes Apply Eric's scratch patch that moves a purged Volume to
1517 the RecyclePool. Question: how is RecyclePool set? what
1518 happens to the ScratchPool?
1519 kes Apply Eric's media patch that collects read/write media
1520 times as well as byte counts. This patch requires a
1521 simultaneous upgrade of the DIR and SD. Note, there
1522 should be some way to turn off timing. I'm not sure
1523 times are in Bacula units.
1524 kes Apply Eric's batch-insert patch.
1526 kes Update projects list.
1528 kes Implement Include/Exclude file lists in FD as dlists using
1529 the new dlistString class. This permits efficiently having
1530 large include/exclude lists and completes project Item 25.
1531 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1532 console is authorized to cancel the job. This fixes bug
1534 kes Modify SD so that the VolCatJobs medium record is updated
1535 at the beginning of a Job rather than the end. This
1536 fixes bug #775 where exceeding MaxVolJobs caused jobs
1538 kes Added a mutex around getting and setting Volume information
1539 so that multiple simultaneous jobs will single thread.
1541 Switch to using Subversion
1542 kes Remove src/pygtk-console/ from configure
1544 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1545 plus the entrypoints.
1546 kes Apply patch supplied that corrects debug print
1547 in canceling jobs for max run time. Supplied as
1548 part of bug #621, which was previously fixed.
1550 kes Test on job_canceled() and sd_msg_thread_done inside
1551 loop starting the message thread to avoid a race condition.
1553 kes Remove rl_catch_signal from console.c as it conflicted
1554 with the header definition. Fixes bug #765.
1555 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1557 kes Clarify some stored/acquire messages to indicate if the
1558 problem is with read or append.
1560 kes Fix memory leak with storage ids in cats/sql_get.c
1561 kes Terminate watchdog earlier to avoid reference to released
1562 memory -- reported by Jason Austin.
1563 kes Move closing the database from jobq.c to the director daemon
1564 termination routine. This fixes memory leaks for shadow jobs
1565 (i.e. migration jobs).
1566 kes Free up the unique jobid chain items in migrate.c. This fixes
1567 a memory leak problem.
1568 kes Convert some ugly looking for statements to use foreach_alist
1569 in findlib/find.c. This will facilitate converting the structures
1570 to use dlist (for large include/exclude lists).
1571 kes Fix a bug in the btree.c and btree.h routines, then rename them
1572 rblist and add them to be built in src/lib. Include some new
1573 methods written by Rudolf Cejka that make the code more readable
1574 (hides some of the ugly casting).
1575 kes Add set_next() and set_prev() methods which make the code much more
1576 readable. Also add a new dlistString class that facilitates storing
1577 strings in dlists. To be used in the large include/exclude lists.
1578 kes Make some trivial modifications to lib/tree.h that use rblist
1579 rather than dlist for storing the tree links. This was suggested
1580 by Rudolf Cejka. The result of this is that the restore tree now
1581 uses red-black binary trees rather than simple linked lists. This
1582 should give rather dramatic speed improvements for directories
1583 contining large numbers of directories/files (more than 10000).
1585 kes Fix maxruntime bug #621.
1587 ebl Implement the include JobID in spool file name project.
1588 kes Reorder projects file in order determined by Jan 2007 vote.
1589 kes Implement item #12 on project list -- quick release of FD by
1591 kes Fix open of SQLite3 db where user does not have write permission
1592 so that DIR does not crash. Fixes bug #761.
1594 kes Add back missing @ in Win32 Makefile.
1595 kes Change 'Device not configured to autolabel' from INFO
1597 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1598 which should restart an indefinite # of times.
1599 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1600 other DIR specifications.
1602 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1603 Fix path quoting in SQLite scripts.
1604 Fix problems with SHGetFolderPath.
1606 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1608 kes Fix Job restart on error bug that promotes an Inc to a Full
1609 backup. This should fix bug #755.
1610 kes Add qt-console and first cut of code.
1614 kes Fix Bacula->Documentation link on Win32 to point to index.html
1615 instead of bacula.html. Fixed bug #750.
1616 kes Return JobId in db_get_job_record() when JobId==0. This should
1618 kes Do not release source pointers when restarting a failed job.
1620 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1621 This *should* fix bug #747.
1622 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1625 kes Modify USTORE constructor to set an empty store_source string,
1626 and don't copy the store_source string in a cancel. Hopefully
1627 this will fix Arno's seg fault, bug #744.
1628 kes Add back code to disable conio in configure. Fixes bug #743.
1629 kes Correct the Options scanner in the FD to correctly handle
1630 SHA1 option, which was eating the next option. Reported by
1632 kes Add code to indicate when the SD is spooling, spool wait, and
1633 despooling as requested by Alan Brown.
1635 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob