1 Technical notes on version 2.4
5 kes Ensure that SD tried to mount a volume not in an autochanger
6 at least once before asking for operator intervention.
10 kes Clear in-use bit on vol when unused while swapping.
12 kes Remove sleep at end of ./bacula
13 kes Clear hash packet for hardlinked files correctly. This corrects
14 a long standing bug where hardlinked files selected individually
15 would occasionally not be restored.
17 kes Apply Eric's patch to ensure that autoprune does not return
18 a Volume not in the autochanger unless requested to do so.
19 kes Correct bat restore display of multiple drives. This fixes
21 kes Do find_a_volume() each time an unload is done. This
22 fixes the failure of maxvol2-test.
24 Release Beta version 2.4.1-b2
26 kes Use Qmsg() in job.c watchdog callback.
28 kes Release main control rwlock if ABORTing.
29 kes Make watchdog connect timeout queue messages rather than sending
30 directly to avoid lock conflicts with the real thread.
31 kes Remove const char that causes problems with Python, which has
32 older 'incorrect' headers.
33 kes Add const char in dbd.c to avoid compiler warnings.
35 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
36 mt. This fixes bug #1116.
37 kes Fix failure of 2drive-concurrent-test. Always read label;
38 clear_unload() only after drive is defined in acquire_for_read().
40 Release Beta version 2.4.1-b1
42 kes Back out bad src/lib/base64.c change.
44 kes Generally clean up the manual tape loading code. The main
45 conceptial change is that when a volume is marked to be unloaded,
46 its volume name is retained, and it is only marked as unloaded
47 when either the autoloader says it is unloaded or another tape
48 is read on that drive.
50 kes Fix a recycling problem with two autochangers reported in bug
51 #1106. This may also (unlikely) fix a second recycling bug as
53 kes Fix a SD lock volumes deadlock problem reported in bug #1100.
55 kes Fix format problem in bscan output reported in bug #1105.
57 kes Copy more data when restarting a job so that run
58 overrides are kept. This should fix bug #1094.
59 kes Backport updates to jobq.c where possible.
61 kes Fix bug where SD did not ask operator if the device could not
62 be opened. Reported by Eric.
64 kes Add dbuser to DIR conf file (replaces user).
65 kes Add --with-db-password to ./configure
66 kes Fix regress to handle db_password.
67 kes Fix a couple of pedantic compiler warnings.
68 ebl Fix bug when starting a restore on a storage that doesn't
69 have the requested MediaType.
71 kes More work on word alignments -- eliminate all ints from
72 the configuration routines.
74 kes Fix bug reported by Scott Barninger where the bacula script
75 refers to scripts in the wrong directory. Needed to meet the
76 requirements of recent FHS location changes.
77 kes Fix word alignment problem on non-Intel 64 bit machines
78 such as Solaris. This should fix bug #1097 -- bus error in SD.
80 kes Add missing win32/patches/wxWidgets.patch to 2.4 repository.
84 kes Update version to reflect the magnitude of the SD changes.
86 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
89 kes Add create_postgresql_database.sql to Win32 installer. Should
90 fix problem reported by Juilio Monteiro.
91 kes Get correct slot when auto unloading a device. This fixes bug
94 kes Fix multiple media restore.
95 kes Make DEVICE Slot private and access it via a method.
96 Allows better control over when it is set and cleared.
97 kes Fix possible seg fault if SQL error.
99 kes Add debug code to SD.
100 kes Fix renaming a Volume, which used the wrong Volume name.
102 kes If operator has rewind tape, print warning, release tape and
103 try once more. If tape is positioned somewhere, something went
104 wrong, so mark the tape in error and try once more. Previously
105 this error was fatal, now it produces an error message.
106 kes Ensure correct volume name displayed during restore
107 kes Ensure that Volume is mounted for restore.
109 kes Fix a few more Coverity reported problems.
111 Beta Release Version 2.2.10-b4
113 kes Enhance a couple of SD debug messages.
114 kes Tweak unload flag setting and ensure it is set during swap.
116 ebl Fix #1091 about bad output in estimate command.
118 kes Modify autochanger locking to attempt to avoid race
120 kes Make sure device not busy before doing label command.
121 kes Display open() errors except when polling. Previously too
122 many were suppressed. This should fix bug #1070.
123 kes Fix Win32 reparse points. Bacula will not recurse into any
124 reparse point directory, including mount points, unless the
125 directory is explicitly mentioned at the top level (same as
126 with Unix). A file that is linked to another file will be
127 backed up -- much as Unix does for hardlinked files.
128 This fixes bug #1041.
130 kes Remove double quotes from ChangeLog and ReleaseNotes
131 kes Remove StorageId test when pruning and recycling (Eric's changes).
132 kes Remove old form of locking when getting volumes -- causes deadlock.
134 kes Fix buffer overruns detected by Coverity.
136 Beta Release Version 2.2.10-b3
138 kes Tweak joblog display.
140 kes Implement --without-qwt
141 kes Fix layout of restore tree dialog
142 kes Add configure bat QWT libraries, so that bat can be built
143 with or without the QWT libaries.
145 kes Apply batfix bat cleanup patch from Riccardo.
146 kes Make sure we unload the right slot when swapping.
148 kes Improve SD reserve debug code.
149 kes Testing an improvement to free up volumes no longer in use.
151 Beta Release Version 2.2.10-b2
154 kes Rework SD acquire for read to handle autochanger Volume
156 kes Implement regression that explicitly tests swapping a Volume
157 from one drive to another.
158 kes Enhance disk-changer to detect most error conditions.
159 kes Fix SD code so that it properly swaps a Volume between drives.
160 This fixes bug #1083.
162 kes Prevent a Volume that is being swapped from being freed from
163 the volume list. This will most likely fix, at least partially,
165 kes Fix strippath so that it does not get a buffer overrun and crash FD.
166 This fixes bug #1078.
167 kes Make inability to change owner/group when creating a dir only a
168 warning rather than an error.
170 ebl Fix SQL query in migration code
172 kes Force unload of volume when wrong volume mounted in SD.
174 kes Fix bat seg fault at termination.
175 kes Add Bacula generated version to bat about box.
177 Beta Release Version 2.2.10-b1
179 kes Permit multiple simultaneous restores -- experiment.
181 kes Backport development stream SD reservation system changes.
184 kes Move final volume swapping code to DCR method and
185 call it from acquire_for_read().
186 kes When wrong volume is mounted during read, unload_autochanger.
188 kes Stop searching for Volumes in SD askdir if DIR returns the
189 same volume name twice in a row.
191 kes Tweak the swap Volume from one drive to another code so that
192 it now seems to work.
193 kes Resolve several problems with recycling that broke the new
194 code (these problems are in 2.2.9 as well).
195 kes Remove the volume lock when calling the sysop code.
196 kes Don't mark a reserved volume with no writers as unused otherwise
199 kes Rework class structures for VOLRES, DCR, and DEVICE to make
200 the method names a bit more logical, and for more logically
201 handling the responsibilities.
203 kes Remove redundant code in terminating the scheduler that just
204 causes a seg fault in many cases.
205 kes Cleanup releasing a volume and make it a DCR method.
206 kes Improve algorithm for detecting pre-reserved volume and
209 kes Tweak volume swapping code so it works.
210 kes Correct name overloading in mount.c
211 kes Replace released flag in VOLRES with reserved and add access
212 methods for the VOLRES class.
213 kes Prevent volume from being released while being swapped.
214 kes Refactor parts of stored/mount.c
216 ebl Add sanity checks for VolWriteTime and VolReadTime
217 ebl Take care of bad clock changes while computing VolWriteTime
218 and VolReadTime. This should fix or limit #1066
219 kes Correct error string numbers in dird/catreq.c
220 kes Restructure reserving, acquiring, and mounting volumes. Calls to
221 autochanger are deferred for mount.c -- simplifes the code.
223 kes Do not prune any running job. It just fails the job.
224 kes Lock the volumes when changing dev->reserved_device and marking
225 the volume unused otherwise the device can get reserved by
226 another job before the volume is released, thus blocking it.
229 Beta Release Version 2.2.9-b7
231 kes Close bat console windows first to eliminate error message
233 kes Remove useless code in Scheduler that causes seg fault on
235 kes Correct some SD catalog request error messages.
236 kes Don't allow pruning of any running job.
237 kes Turn off code in read_record that causes a seg fault in the SD
238 when reading past an EOS_LABEL.
239 kes Turn off unloading the autochanger in reserve.c as it just
241 kes Lock volumes when unreserving a device.
242 kes Do not mark volume unused when recycling.
243 kes When acquiring, don't mark volume unused if it is reserved (busy).
245 Beta Release Version 2.2.9-b6
247 kes Eliminate ./configure warning on po directory
248 kes Fix bug #1063, reuse of freed ptr in list nextvol.
249 kes Release regex compile buffer in filed/job.c
250 kes Add proper type of const char in sql_create.c
251 kes Turn off debug in daemon termination routines
252 kes Move free_volume_list() before devices are freed in stored.c
253 kes Fix reference to uninitalized stack variables in bregex.c.
254 This should correct bug #1067.
256 kes Fix possible seg fault in SD when freeing a volume entry.
258 kes Apply patch from bug #1069 that corrects spurious error messages
259 when ACLs enabled on SGI but no ACL exists.
260 ebl Fix a storage deamon segfault at debug level 500.
262 Beta Release Version 2.2.9-b5 -- not released
264 Beta Release Version 2.2.9-b4
266 kes Re-enable code to remember last volume mounted on a non-tape
268 kes Add patch supplied in bug #1068 that fixes a SD crash when using
269 a Virtual autochanger.
270 kes Generate correct JobMedia records during spooling/despooling when
271 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
272 <tih@hamartun.priv.no> for excellent analysis and testing.
274 Beta release Version 2.2.9-b3
276 kes Rework certain SD locking based on gdb tracebacks of deadlocks
277 sent by Eric. This code now uses only the volume_lock() rather
278 than the reservations lock when at EOM and acquiring a new
280 kes Ensure only one exit point in several subroutines.
282 Beta release version 2.2.9-b2
284 kes Fix to initial tape drive open to release the volume name
286 Beta release Version 2.2.9-b1
288 kes Fix to JobMedia fix.
289 kes Fix bug pointed out by Peter Much that causes the StorageId to
290 be updated when reading a tape (during migration, it could have
291 been incorrectly set to the write StorageId).
293 kes Implement autostart scripts for Debian
295 kes Fix mtx-changer.in for broken Debian mt program.
297 kes Massive commit of all fixes and back ports to create 2.2.9
299 kes Apply doc fix from bug #1062.
300 kes Resolve crash and improper restore wx-console Win32 restore
301 GUI. Fixes bug #1065.
302 kes Update Win32 wxWidgets to latest version.
303 kes Attempt to do correct handling of Win32 mount points. Should
305 kes Fix Win32 FD backup/restore memory leak due to improper termination
306 of BackupRead/Write. This fixes bug# 1038.
307 kes Add const to AIX prototype for initgroups()
309 kes Undo bug #1047 heap overrun fix as it is not correct.
311 kes Fix creating first JobMedia record during Migration to include
312 proper index. This caused slow restores of migrated jobs.
314 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
315 and do not strip paths on symbolic links.
316 kes Set catalog backup database and user name from values specified on
317 the ./configure line.
318 ebl Apply patch to correct bug #1031, about wrong pool source information
321 Release Version 2.2.8
323 kes Apply patch from Martin to correct bug #1040, bscan sets existing
325 kes Fixed important spelling error in doc -- bug #1045.
327 kes Move initialization of read/write res lock earlier in the code.
328 This fixes the crash with a null conf file. This fixes bug
330 kes Redefine CURES in lib/parse_conf to be URES and move it all
331 into lib/parse_conf.c -- this responds to bug #1042, but does
332 not fix it. The fix is not to compile with FORTIFY_SOURCE.
333 kes Backport fix de-referencing a NULL pointer in the scanner from
334 the trunk SVN. I don't think this was reported as a bug.
336 Beta release Version 2.2.8
338 kes Re-enable the new job code editing (%f).
340 kes Fix bsnprintf for float point numbers. I broke recently when
341 parameterizing some variables. This fixes bug #1036.
343 kes Move Heartbeat documentation from Job to Director resource.
344 This fixes bug #1033.
346 kes Fix existing switch drive SD code to call autochanger to release
347 any old volume. This must be done to keep the autochanger from
348 releasing subsequently newly reserved volumes in doing a close().
349 This should possibly fix bugs #1032 and #1018.
350 kes Apply big backport of current SVN SD code that corrects a number
351 of race conditions. This is a first step in fixing bug #1018.
353 ebl Fixes bug #1028 where "Selection Type" option was not usable
357 Release Version 2.2.7
359 kes Partial back out (disabled) %f job code editing because it
360 does not build on Win32.
361 kes Fix seg fault Frank Sweetser reports in regression testing
362 on his systems. The problem was that the original author of
363 bsnprintf.c did not take into account the side effects of
364 using ++x in the argument to a #define.
366 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
367 that implements double quoting include names in conf files,
368 and also allows piping input by having the first character
369 be a vertical bar (|).
370 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
371 that implement %f in RunScripts to pass the FileSet name.
372 kes Skip leading | when lex input comes from a pipe as suggested
373 by Michael Stapelberg <michael@stapelberg.de>.
375 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
376 Nerijus Baliunas <nerijus@users.sourceforge.net>
378 kes This patch corrects a problem where the maximum concurrent storage
379 jobs counter gets out of sync during restore jobs causing jobs to
380 'wait on max Storage jobs'. This patch fixes bug #1009.
382 kes Add new include to postgresql.c suggested by Marc Cousins so
383 that it compiles correctly with pgre version 8.3. Also fix
384 misuse of %x with pointer (should be %p).
386 kes This patch fixes bcopy so that it produces correct Volumes.
388 kes This patch eliminates spurious output to the console during a VerifyVolume
389 job that contains encrypted data. It fixes bug #1024.
391 kes This patch prevents the 'status dir' command from trying to use a scratch
392 volume and possibly moving it from one pool to another. This patch fixes
395 kes Fix --archivedir addition to configure. Replace it with
396 --with-archivedir in configure.in This fixes the regression
398 kes This patch fixes bug #1012 where the job is canceled because
399 of Max Run Time exceeded when the job has not yet started.
401 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
402 one 'part' to write. Instead of each part being stored on disk,
403 written to DVD, then deleted from disk, all parts are written to disk,
404 and only the last is written and deleted from disk.
406 kes Correct typos in disk-changer.in
408 kes This patch fixes the status command to include the formating string for
409 JS_AttrInserting. It fixes bug #1021.
410 kes This patch should fix the Mac OS X build problem on the latest
411 Darwin, where sys/types.h was not included correctly (apparently
412 due to a change in the Mac headers). The solution was to explicitly
413 ensure that it is defined for the ./configure.
414 This patch also has a rebuild of configure that includes the Debian
415 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
416 kes This patch should ensure that queued messages to the console are
417 displayed as soon as possible. It should fix bug #1007, but has been
418 reported not to work.
420 kes This patch fixes the infinite loop when trying to increase the
421 maximum number of volumes in a Pool during the add command.
422 This patch fixes bug #1008.
424 Release Version 2.2.6
426 kes Get fix for joblist bug in bat from trunk.
428 kes This patch fixes bug #1003 where putting the message output from
429 a Verify job into the catalog results in a recursive loop. The problem
430 seems to show up only with postgresql (to be verified).
432 kes Fix bug #942 where lots of emails where generated when the heartbeat
433 interval was low and Bacula wanted a different tape from the one in
436 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
437 which was updated during a restore (or a reading migration) bug #982
439 ebl Use qmake-qt4 instead of qmake when available (debian system).
441 kes Add a security warning to src/cats/make_catalog_backup.in indicating
442 that passing the password via the command line (arg 3) is insecure.
443 This responds to bug #990 (it doesn't fix it).
444 kes Apply 2.2.5-postgresql-errors.patch
445 kes Remove unneeded File table index on JobId, which is already
446 present as the first index of another multi-index.
448 kes Set default debug_level to zero. This corrects bugs #991 and #993.
449 kes Fix a crash in bat when it cannot connect to the Director for example
450 if the Director is not running.
452 kes Activate Close button on tray-monitor window. This fixes
455 kes Fix spurious warning message printed when creating a volume with
456 a LabelFormat. This fixes bug #976.
458 Release Version 2.2.5
460 kes Add JobId in place of Job name in all the Jmsg() output.
461 kes Correct the APP_DESC for the Win32 storage service (remove an e).
463 kes Add new SD despooling attributes and Dir inserting attributes
464 job status codes. This fixes bug #961.
465 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
467 kes Fix doc issue. This fixes bug #963.
468 kes Fix listing performance problems in bat. Pointed out by
470 ebl Fix replace on restore. This fixes bug #969
471 kes Fix bat code that tests for Win32. This should fix bug #968
472 kes Query 5 list wrong Vol after migration. This fixes bug #960
474 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
475 in back porting from 2.3.x
477 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
478 The details are included in the notes in this file.
480 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
481 messages; it fixes a problem opening the SQLite3 database when multiple
482 simultaneous jobs were running; it fixes a bug with certain versions of
483 MySQL where batch inserts failed because of table name character case
484 (upper/lower) differences.
485 kes Fix race condition that drops final block written to volume.
486 This happens in rare cases with multiple simultaneous jobs
487 when the Volume fills. This fixes bug #964. May be related
488 to bug #935 and possibly #903.
490 kes Fix FD->SD authorization failure, which was due to spurious
491 wakeups from a pthread_cond_timedwait(). Simply check the
492 predicate before continuing. This fixes bug #953
493 dvl Add new configuration item --archivedir
494 dvl Adjust regression tests to use tmp not /tmp. This will allow
495 multiple concurrent runs of the regression tests.
497 kes Eliminate more strerror() and replace with bstrerror().
498 kes Remove BSD getopt and replace with unrestricted IBM version.
499 kes Fix Win32 build for changed calling sequences.
501 kes Fix FD->SD authorization failure, which was due to spurious
502 wakeups from a pthread_cond_timedwait(). Simply check the
503 predicate before continuing. This fixes bug #953.
504 kes Add const char where needed (more to do).
506 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
507 kes Don't overwrite error message in check_tables_version.
509 kes Unlock batch insert tables with same calls used elsewhere.
510 kes Allow starting 59 jobs a second.
511 kes Make SD session key more random.
512 kes Add retry for SQLite opening db if it fails. Probably helps
514 kes Suppress extra error messages during batch insert failure.
516 kes Put some FD auth code on dbglvl rather than fixed.
517 kes Return insert attributes error message in db msg buffer to avoid
518 false error messages. Helps fix bug #966.
519 kes Separate batch init error messages. Probably helps fix bug #966.
520 kes If Dir gets an error during inserting attributes, cancel SD.
521 This reduces unnecessary error messages.
523 ebl Cleanup batch insert code. Probably fixes bug #965.
525 kes Turn off some code when batch insert not enabled.
526 kes Edit FD name in connect error messages.
528 kes Add code to handle tray monitor separated from Win32 FD.
529 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
531 kes Fix ANSI tape labeling. This fixes bug #954.
532 kes Increase the max block size to 4MB fixes bug #957.
533 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
534 is not properly mounted (recognized) during a poll.
535 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
536 Job that has differences reports Verify OK.
537 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
539 Release Version 2.2.4
541 kes Increase size of name string when FD making connection to SD.
544 kes Add waits to multiple exit detection code to try to force pid
545 file to always be deleted.
546 kes Restore good dev.tar.gz to rescue set appropriate binary property.
548 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
549 trying to switch drives by checking for blocking before unblocking.
551 kes Cancel storage daemon in all cases where FD reports error. This
552 should fix virtually all cases of bug #920.
554 kes Fix error message that was clobbered when Dir tells SD it does not
555 have write permission on Volume. This should fix a minor point
556 in bug #942, but not the main problem.
557 kes Add code to cancel job in SD if FD connection fails. This should
559 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
560 kes Fix migration code to get correct Volume name with multiple volumes
561 by skipping |. Fixes bug #936.
562 kes Implement patch supplied by Landon to fix bug #944 where using
563 TLS with bconsole uses 99+% of the CPU.
564 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
566 kes Move patches into patches directory.
568 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
571 ebl Using 'm' in bconsole will show messages like before,
572 and not memory usage.
574 Release Version 2.2.3
575 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
578 kes Fix bug #935, and probably also bug #903 where files were not
579 restored. MediaId was not properly set in JobMedia record after
582 kes Add ./configure search in qwt-qt4 for qwt package
583 kes Apply Martin Simmons patch that should turn off the new API usage
584 when batch insert is turned off allowing building on older
587 Release Version 2.2.2
589 ebl Detect if new PosgreSQL batch insert API is present.
590 kes Correct incorrect mempool call causing Director crash.
591 sb Update spec files for 2.2.1 release
593 Release Version 2.2.1
595 kes Update POTFILES.in
596 kes Cleanup a few underquoted AC_DEFUNs in configure
597 kes Apply patch from Martin Simmons that adds a test for va_copy to
600 kes Fix bug #921 by increasing the number of tries to create a new volume
602 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
603 can be called multiple times. Implement a version for machines
604 without va_copy() that gets a big buffer.
606 kes Integrate more portable zone offset code into bsmtp.c
607 Submitted by Attila Fülöp.
609 kes Fix bad SD->FD return status reported by
610 (James Harper) <james.harper@bendigoit.com.au>
611 ebl Fix a bug in read_close_session which return random status
612 thanks to James Harper
614 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
615 and directory names during restore of single file/directories.
616 kes Add sanity checks to .sql command when string is empty. Hopefully
617 that will resolve Dirks Director crash.
619 kes Apply patch submitted by Martin Simmons that corrects a seg fault
620 in the bsmtp chat subroutine when debug is >= 10.
622 kes Fix Director crash when running bat SQL queries.
623 kes Add David's notes on Item 8: Copy pools.
625 kes Rework projects file to be current and ready for a vote.
626 kes Enhance lex scanner error message.
628 kes Tweak LICENSE file to mention BSD code.
629 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
630 if specified on the ./configure.
631 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
632 This class is intended to allow us to open a second bsock to the
633 Director while in the restore subdialog.
635 kes Fix configure to create bat Makefile before creating dependencies.
636 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
637 kes Add a tooltip to the tray monitor.
638 dvl Set the Director's PID file before dropping privs. This fixes
641 kes Update AUTHORs file
642 kes Increase the default max concurrent jobs to 20 in FD and SD to
643 correspond with the default .conf files.
644 kes Rewrite the Win32 service routines. This eliminates the 3 copies
645 some different, of the same file created by RN when porting the
647 kes Rearrange some of the Win32 directories and the placement of the files
649 kes Set DEVELOPER flag in version.h
651 ========================================================================
652 Release Version 2.2.0
654 kes Apply a second doc patch from Marc.
655 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
656 improves the tips section that discusses how to setup multiple
659 kes Update bat README file.
660 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
661 corrects a typo in the Recycle status check in db_find_next_volume().
662 This will probably fix a number of annoying problems with multiple
664 kes Modify most of dird/msgchan.c to use bsock class calls rather than
665 bnet calls -- no functionality change.
667 kes Modify the Verify output to specify if files are missing on
668 the Volume(s) or disk. Fixes confusion in bug #916.
669 kes When more than one Volume is read in a migration job, the last
670 Volume bytes reported are from the last read volume rather than
671 the last written volume. Fixed. This fixes bug #910.
672 kes Fix display of Recycle flag after update volume=foo recycle=yes.
673 It previously printed New Recyle flag is: no. This fixes bug
676 kes Correct seg fault when switching tape drives during restore.
677 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
678 be used until after 2.2.0 release.
680 kes Remove fnmatch() in SD that permitted wild card specifications.
683 kes Fix %g in filename returned by SQL for browse tree reported by
685 kes Fix configure so that it puts config.out in the cwd rather than
687 kes Attempt to fix the locking problem reported by Eric in bug #906.
688 kes Make berrno class to leave errno unchanged after constructor call.
689 kes Make bnet_server use the heap rather than the stack to allocate
690 its socket fd pointers to avoid a crash at termination. Problem
691 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
693 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
694 and putting it in depkgs-qt along with Qt4.3.
696 kes Rework code in acquire.c that switches drives for reading when
697 the Media Type does not match. This should fix bug #906
699 ebl Fix a director segfault during job setup #907
700 kes Correct seg fault in postgresql when first operation returns no
701 rows. Fixes Dirks File browser problem seg fault with bat.
703 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
704 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
707 kes Implement PopUp YES/NO dialog for bat.
709 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
711 kes Correct RunScript to terminate job in FD on failure.
712 kes Change abort_on_error and AbortJobOnError to fail_on_error
713 and FailJobOnError in RunScripts.
714 kes Minor tweaks of code formating in RunScripts, principally to
715 avoid depassing 80 columns.
717 kes Eliminate one #ifdef Win32 in bsmtp
718 kes Implement grow tool to grow a file for testing very large databases.
719 kes Add big-vol-test to test Bacula seeking with > 5GB.
722 kes Modify find_next_volume() to return all values in Media record.
723 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
727 kes Update Release notes
729 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
730 Warning, in previous beta version, all media get from scratch keep their
733 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
734 This should fix bug #842. Made a note to look at removing the temp
735 files at the end of the install.
736 kes Add ability to mount and unmount a file device providing it is
737 marked as being removable and has the appropriate mount and unmount
738 commands defined in the Device resource. This fixes bug #830.
739 kes When applying a storage override, release all previous storage
740 definitions rather than just prepending the new storage.
741 This should prevent a good deal of confusion.
743 kes Implement ./configure search for qwt libraries.
745 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
746 Win32 FD. This should fix bug #893.
747 kes Remove an unnecessary beep in Win32 init code.
748 kes Update copyright dates in Win32 executable about boxes.
749 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
750 code with a BSD getopt.c and getopt.h.
751 kes Remove sched.h from the Win32 compat directory -- not used.
752 kes Remove the Exit menu item from the Win32 tray monitor. If you really
753 need to shut it down, do it through the services panel or the command
755 kes Remove some inappropriate Bacula FSFE copyrights.
756 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
757 kes Fix regress config non-portable test as pointed out by
758 Florian Heigl <florian.heigl@gmail.com>
759 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
760 as pointed out by Florian Heigl <florian.heigl@gmail.com>
762 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
763 Reported by Frank Sweetser.
767 kes Fix client-only build.
768 kes Integrate client-only fixes for bsys (initgroups) and conio from
769 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
770 kes Make arguments to get_scratch_volume() in same order as other
772 kes Rework the prune_volumes() subroutine so that after purging and
773 no volume found in desired pool, it will check for a scratch
774 volume. This prevents recycling the whole scratch pool.
775 kes Add code to status storage to print boffset_t (largefile support).
777 kes Move qwt (Graphics libarary for Qt4) to depkgs.
778 kes You now need a --with-qwt=<dir> to be able to build bat.
779 kes Update src/win32/cats/bacula_cats.def to include the new
780 db_get_query_dbids() call on Win32.
782 kes Correct a problem when selecting a scratch volume and moving
783 it to another pool that lost some columns.
784 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
785 kes Enhance Autochanger error messages to include Volume and device name.
786 kes Rework prune_volumes() code to take account of InChanger flag,
787 and to handle recycling volumes going to the Scratch pool and
788 current pool because the RecyclePool directive.
789 kes Implement a better and more efficient db_get_query_dbids() to
790 handle creating and passing back a list of DBIds.
794 kes Start work on new more efficient DBId subroutine. First use
795 will be for recycling volume to Scratch inchanger.
796 kes Increase number of JobIds in pruning from 1000 to 10000.
797 This to be replaced by above routine.
798 kes Begin implementation of building Qt4 on Win32.
799 kes Correct typo in fix I added for bad TLS shutdown.
800 kes Pull 2.0.3 patches into patches directory.
801 kes Update Release notes. Include qt-console in line count.
802 kes Update Projects file.
804 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
805 bug in migration code where a job that spanned two volumes
808 kes Implement new BST_DESPOOLING blocked state. Change from locking
809 during despooling in SD to blocking. This means that other threads
810 can work with the device structure, in particular the reservations
811 system while despooling.
813 kes Fix return in reservation message queue that missed clearing
814 the jcr lock (implemented 26Jun07 below).
815 kes Rename a number of dev methods to make locking function names
817 kes Document locking in lock.c. Move lock structures to new file
820 kes Move reservations message lock to lock jcr only this
822 kes Move main SD locking code into lock.c (new file).
823 kes Update Win32 build to include lock.c
827 kes Dirk committed the qwt library code for drawing graphs in bat.
828 kes Tweak install of qwt so that it is integrated with ./configure.
830 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
831 out by Eric (my typo).
832 ebl Fix configure.in to get batch mode enable
833 kes Return correct string from authenticate.cpp in bat when connecting
835 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
836 spurious line drops when using TLS.
837 kes Do not file reparse points when restoring a file that already
840 kes Implement Windows reparse points -- similar to directories, but
841 we do not descend into it. This is a first cut. They seem to
842 be backed up, but restore is not yet tested.
843 kes Remove restore_blocking in tls code when shutting a socket to leave
844 it in blocking mode. Hopefully this will fix the encryption bug
845 reported by Frank Sweetser.
846 kes When opening a file for backup, tell the OS that we are going to
847 read it sequentially -- optimization.
848 kes Change variable names in authenticate_director() to not conflict
849 with member names in bat. Caused great confusion with compiler,
852 kes Queue openssl error messages in case of comm problem.
853 kes Do shutdown() call if socket terminated.
854 kes Remove some duplicated code in tls.c
855 kes Move more of the bsock member variables into private and access
857 kes Add Frank Sweetser's tls-test to the regression suite.
859 kes Add Swedish sv.po file
861 kes Don't print clock skew message in FD if less than 3 seconds diff.
862 kes Add a bit of VSS info to status client.
863 kes Implement a first cut of Vista VSS, using Win2003 code.
867 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
868 loaded tape but uses first drive).
869 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
870 This was indeed a Win32 issue.
872 kes Simplify search of autochanger for in-use Volume.
873 kes Fix exit condition of check for in-use volume. kes Remove
874 inappropriate my_postgresql_free_result() in db_close()
876 kes Fix bad return in FD when encryption signature not found.
877 Probably caused a crash.
878 kes Inhibit missing encryption signature error messages for
879 file types where no signature computed.
880 kes Correct inverted check on autochanger in reservation system.
881 kes Tweak debug code in autochanger reservation.
883 kes Add some additional locking in the cats directory in subroutines
884 that modify packet variables called from batch insert.
885 kes Rework how dcrs are allocated. new_dcr() can now be called
886 with an existing pointer, and it will simply clean it up.
887 This allows the reservation system to test various different
888 devices, and will permit easy device changes.
889 kes A bunch of changes all over to handle new new_dcr() calling
891 kes Work more on the Volume management in the SD. Remember Volumes
892 for tape drives and for autochangers (even virtual disk changers).
893 kes When looking at the Volume list to reserve a drive, handle
894 autochanger names correctly by interating through the changer
895 devices. Also call the Director to see if a Volume is suitable
897 kes Fix some bugs in bscan. Make sure all media records are written.
898 Make sure that valid JobMedia records are written for disk files.
899 Previously they were completely wrong.
900 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
901 that the URLs don't change and so that the developers will all
902 work off the same copy. Rebuild from scrach.
903 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
907 kes Fix seg fault in FD from incorrect digest size.
908 kes Fix argument to non-OpenSSL crypto.c subroutine.
912 kes Remove a few malloc()s from the encryption code.
913 kes Use the class calls to bsock in filed/backup.c and restore.c in
914 place of the old bnet_xxx code.
915 kes Implement code that does an on the fly calculation of the
916 signing digest during restore of encrypted files. It makes
917 a best guess at the algorithm, and if it is not correct, will
918 then revert to the old code which reads the file after it is
920 kes Implement at least one missing crypto stream in stream_to_ascii()
921 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
922 #877 where a reload with bad syntax causes Dir to exit.
924 Cut: 2.1.14 beta (not released)
926 kes Do not free a volume on a tape drive until another volume is
927 mounted and read, or the autochanger unloads the volume.
928 This should help the SD re-use volumes that are already mounted,
929 and should fix bug #886.
930 kes Apply patch from user brettedgar that allows gnome2-console include
931 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
932 kes Apply patch from Lucien Weller that fixes day of week calculation
933 because of DST flag problem. Fixes bug #887.
935 kes Move find_next_appendable_volume() to after acquiring a valid device
936 in reserve.c. This fixes bug #864 -- confirmed by reporter.
938 kes Unable to reproduce bug 872. However added additional testing for
940 kes Bug #874 resolved by documenting SQLite limitations.
941 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
942 kes Bug #881 resolved by removing typo in mtx-changer script.
943 kes Made Frank Sweetser's wiki the official Bacula wiki with his
944 approval. Added a link to the wiki on the web page, and implemented
945 a backup from http://paramount.ind.wpi.edu
947 kes Fix update allfrompool to pass pool name.
949 kes Convert to pure GPL v2 license.
950 kes Fix sscanf problems reported by Peter Buschman that caused
951 a bus error on Solaris.
952 kes Rework (simplify) the select prompt in bat.
953 kes Move get_jobid_from_tid() into lib and create a
955 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
956 should definitely fix the problem of lost error messages in the
958 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
959 kes Eliminate tcpd.h from the project. Enclose the #include from the
960 library with extern C ...
961 kes Add print of signal name when a signal is trapped.
965 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
967 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
968 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
969 makes SQLit3 run 30 times faster, though a bit less safe.
970 kes Implement --with-batch-insert in configure and detection of thread
971 safe libraries. It is on by default, but turned off if no thread
972 safe library (e.g. SQLite 2) is available.
974 kes Fix Bacula PostgreSQL buffer overruns.
975 kes Do better checking for NULL results returned from PostgreSQL;
976 implement retry for failed queries; clear results buffer after
977 failed query. Hopefully this will correct the PostgreSQL failures.
979 kes Implement algorithm to handle only one appendable volume with
980 Prefer Mounted Volumes = no.
981 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
982 returned from a query.
983 kes Make volume lock recursive.
984 kes Implement an additional volume reservation algorithm that
985 starts by considering all reserved volumes then uses the
986 old brute force algorithm of searching the resources to
987 find a suitable device.
988 kes Add new reservations debug code and refine the old code.
989 kes Update the win32/dll/bacula.defs file.
991 kes Tweak reservations algorithm to permit a few more cases, i.e.
992 volume reserved, but on different drive, ...
993 kes Enhance SD status to include Pool and Media Type for drive in a
994 more readable format (a bit longer).
995 kes Fix PostgreSQL double free.
997 kes Minor refactoring of restore decryption code.
998 kes Add code to smartall.c to detect double free of a buffer.
1000 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1001 so that bsmtp will create a correct email address (mailbox only).
1002 kes Modify 'memory' command so that the buffers are listed as 'In use'
1003 to avoid confusion with Orphaned buffers.
1004 kes I reworked the OpenSSL include/lib flags to be handled in
1005 the standard Bacula way, which should fix bug #863 concerning
1006 non-standard OpenSSL libraries.
1008 kes Implement Help Browser window for bat.
1009 kes Fix reload bug that reset StorageId to zero.
1011 kes Fix TLS #ifdefing when TLS turned off.
1012 kes Ensure that when labelling a tape with Slot=0 that InChanger
1014 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1016 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1017 add DISTINCT (required by PostgreSQL).
1018 kes Implement BSOCK authenticate_director() method. Eventually will
1019 authenicate all daemons.
1020 kes Move several more functions into the BSOCK class.
1022 kes Add code to tell the OS that we no longer need a cached
1023 file that we were reading. In findlib/bfile.c. Also,
1024 only cache files that we are reading. Thanks to
1025 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1026 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1027 kes Implement script to automatically generate cats and dll .def
1028 files for Win32 dll.
1029 kes Update README.mingw32 to include new .def file generation.
1030 kes Correct typo in UTF-8 error message as reported by:
1031 jhernandez <julianhernandez@gmail.com>
1032 kes Add additional sm_check() code on debug level 1.
1033 kes Set default debug level to 1.
1034 kes Trap SIGABRT in attempt to get traceback.
1036 kes Reduce bat connect timeout from 30 to 15 seconds.
1037 kes More restructuring and implementing BSOCK class in place of
1039 kes Remove a few unnecessary malloc() tests in crypto code.
1040 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1041 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1042 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1044 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1046 kes Fix Verify InitCatalog. The attributes were not pointing to the
1047 correct saved location.
1048 kes Implement message callback so that GUI is sure to get all
1049 daemon messages. Currently displayed in a dialog in bat.
1050 kes Ignore SIGUSR2 (Bacula timer) in bat.
1051 kes Apply regress patch from bug #859 to allow regress to work
1052 with Solaris compiler.
1054 kes Begin adding TLS support to bat.
1055 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1056 clean up lex.c and make it more readable.
1058 kes Move more bnet functions into the BSOCK class.
1059 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1060 kes Complete change of berrno strerror() method to bstrerror()
1062 Release: 2.1.10 beta
1064 kes Cleanup incorrect email addresses in bsmtp.
1065 kes Make bat display initial messages rather than discard them.
1067 kes First cut of adding .mod to the run command.
1068 kes Implement auto display of messages in bat.
1069 kes Enhanced preferences to allow all Bacula output to be
1072 kes Try to make bsmtp date routines more generic.
1073 kes Fixed bug #856 autochanger documentation.
1074 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1075 kes Add new cats entry point so Win32 builds.
1077 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1079 kes Do better checking for the MySQL 64 bit libraries looking for both
1080 .a and .so libraries.
1081 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1082 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1083 kes Require the thread safe version of MySQL during configure. Thanks
1084 to Andre Noll for pointing this out.
1085 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1086 continuing in migration code.
1087 kes Apply implementation of tray-monitor font derived from gnome-console
1088 submitted by Andreas Piesk <a.piesk@gmx.net>
1090 kes Eliminate important memory loss in SQLite
1091 kes Fixed the batch insert MySQL thread specific data that was not
1092 being freed. See cats/mysql.c:db_thread_cleanup().
1093 kes Fix restore before command.
1094 kes Convert old hdr.name to name() in a few places.
1095 kes Implement update jobid command.
1096 kes Return all time_t dates in db_get_job_record()
1097 kes Stop watchdog in SD earlier.
1098 kes Put Pool just after Storage in please mount message.
1099 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1102 kes Update the po files.
1103 kes Fix Verify InitCatalog by making it cache attributes.
1105 kes Change name bacula-bat to bat for man 1 page to correspond to
1107 kes Check for client and store NULL pointers in status command. This
1109 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1110 kes Fix sign extended editing of %p.
1111 kes Clean out a little old #ifdefing in cats/mysql.c
1113 kes If time diff between DIR and FD is more than 600 seconds convert
1114 INFO message to WARNING.
1115 kes Implement heap size display in status for all daemons.
1116 kes Attempt to fix MySQL db open memory loss (not successfull).
1117 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1118 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1119 Query. This looks like a MySQL but but by doing extra releases,
1120 the memory goes away. This should fix bug #847.
1122 kes When backup fails, cancel SD before waiting for sd termination.
1123 kes If SD is waiting for FD to connect during cancel, wake up the
1125 kes Fix fsf code so that errno is correctly reported.
1126 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1128 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1129 so that Bacula doesn't later stumble into a seg fault.
1130 kes Use the term Restore Client in the restore Job report.
1131 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1132 the original job's FileSetId.
1133 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1134 spooling in migration jobs. Not yet tested.
1135 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1136 reading conf file from a pipe. However, do it with open_bpipe()
1137 rather than popen. Not yet tested.
1139 kes Fix an ugly bug where the VolCatBytes were getting updated
1141 kes Implement bconsole memory command that prints current memory
1142 usage, plus smartalloc dump.
1143 kes Clarify some error messages in backup, admin, and migrate.
1144 kes Shrink label dialog to smaller size.
1145 kes Invert Cancel OK buttons on restore to be OK Cancel.
1146 kes More strerror() to bstrerror() conversions.
1148 kes Start implementing bstrerror() in place of strerror().
1149 kes Stripping path -- seems to work.
1151 kes Prevent door and port files from being restored (mostly
1153 kes Free an unreleased buffer in compat code.
1154 kes Change console Job name from *Console* to -Console- to eliminate
1155 Win32 filename problems. Put Win32 path separator when creating
1156 Console file. This fixes bug #846.
1157 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1159 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1161 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1162 to force Win32 error message.
1164 kes First cut strip path. The data should be passed to the FD,
1165 but nothing is done with it yet.
1166 kes Enhance the digest and signature routines in the crypto
1167 library to accept a JCR and to use it to print error messages
1168 so that they will go in the Job report rather than the daemon's
1170 kes Simplify some of the verify signature code.
1171 kes Simplify a few of the alternative returns in the signature
1174 ebl Use only POSIX regex instead of GNU regex in breg.c for
1175 File relocation. It fix broken freebsd compilation.
1176 kes Convert all other Dir files to use new ua class message
1178 kes Tentative fix for missing digest signature in bug 807.
1179 kes Correct handle problem in new win32_ftruncate routine.
1180 kes Convert ua_purge.c and ua_update.c to use new ua class
1181 message routines for bat.
1183 kes Correct incorrect installation of LICENSE in Win32 installer.
1184 kes Display LICENSE at the beginning of the Win32 install.
1185 kes Attempt to correct the need for the png files to be installed
1187 kes Reapply my bat.conf install script in qt-console. I think I
1188 editted bat.pro instead of bat.pro.in and it was lost.
1189 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1190 the /var/lock/subsys for subsysdir. Also corrects typos in the
1193 kes First cut update job.
1194 kes Correct configure to include qmake of src/qt-console directory.
1196 kes Make restore job yes/mod/no print in one command so GUI works.
1197 kes First cut implementing backup and restore client.
1198 kes Correct editing in Verify output that caused a seg fault.
1200 kes Insure that bat.conf is not overwritten during installation.
1201 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1202 while I was implementing migration in March 2006 !
1204 ebl Cleanup file relocation, using char *RegexWhere instead of
1205 char *where + bool where_use_regexp
1206 kes Update some manpages and add bat manpage.
1207 kes Make a first cut at converting bacula.spec.in for bwx-console
1209 kes Apply patch from John Goerzen to add hostname as fourth argument
1210 to make_catalog_backup script.
1211 kes Fix typos I introduced into bsmtp.c
1212 kes Make pm_strxxx() routines handle input of NULL pointer. This
1213 is to protect from NULL pointers returned from SQL databases.
1214 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1215 kes Add more debug to FIFO code -- fix fifo regression test.
1217 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1218 kes Add thread timer to bnet_connect() to break from OS if wait time
1221 kes Update Win32 build to include new files, new symbols, and
1223 kes Implement socket level heartbeat (tcp_keepidle)
1224 ebl Commit File relocation patch
1225 kes Make bat have 'make install' target.
1226 kes Warn during install if old gnome-console binary found.
1227 kes Warn during install if old wx-console binary found.
1228 kes Add -8 option to bsmtp command line to add content type utf-8.
1229 Fixes bug #809. (Character coding problem in bsmtp).
1230 kes If < is found in target (from, to, cc) then do not enclose the
1231 target in < > in bsmtp. Fixes bug #772 (malformed address).
1232 kes When printing certain items in dbcheck, stop after 300000.
1233 Fixes bug #822. (dbcheck loops).
1234 kes Incorrect status in Dir after waiting for mount with poll set.
1237 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1239 kes Print waiting to reserve a device every 5 mins.
1241 kes Don't call close_part in label.c if tape and relabel.
1242 kes Don't free volume if busy in close() -- should help with
1244 ebl Fix #824 RunScript bug (After script could be execute twice)
1245 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1246 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1247 Add a regression script to test RunScript
1249 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1252 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1253 deprecated. No additional bugs will be fixed, and they will be dropped
1254 in a future release (probably 2.4.0).
1255 kes Change name of wx-console to bwx-console to make it more Bacula
1257 kes Change the name of gnome-console to bgnome-console to make it
1260 kes Some time in March, a Feature Request with patch from Jorj Bauer
1261 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1263 The ability for the director to validate a Client (FD) CN against
1264 an arbitrary set of patterns rather than the hostname, with
1265 A new 'TLS Allowed CN' set of directives which are implemented
1266 in the Client resource. Then pattern matching is used in place
1267 of hostname matching against the Certificate's CN. As an example, we
1268 have certificates which (a) use a local CA, and (b) have a CN of the
1270 kes Add new/changed entry points to Win32 build
1271 kes Create unaccepted-projects for projects that are not accepted.
1272 kes Simplify locking in the reservations system.
1273 kes Add more debug code in reservations.
1274 kes Make sure error condition on reserving a volume is handled correctly.
1275 kes Correct handling of volume_in_use.
1276 kes Correct handling of initializing a device.
1277 kes Move handling of broadcasting releasing a device into release_device().
1278 kes Correct attaching dcr to dev so that it is only done if device
1279 is properly initiated.
1281 kes Locking debug level tweaks in SD.
1282 kes Tweak new Volume code.
1284 kes Add exec external-command [wait-seconds] to bconsole. This
1285 executes the external-command. Note! normally external-command
1286 should be enclosed in double quotes.
1287 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1288 it should normally be off in a production system.
1290 kes Implement die command for SD so that we can force it to dump.
1291 kes Implement SD lock debug code.
1292 kes Implement new algorithm for keeping Volume list in SD. It
1293 is now owned by the device.
1295 kes Implement new code for freeing in use volumes that should
1296 resolve if not all, some of the problems of multiple drive
1297 tape conflicts described in bug 801.
1299 kes Fix gui/bacula-web/images files in svn.
1300 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1302 ebl Fix a bug in batch mode (in string escape)
1303 kes Correct migration prune SQL typo that crept in in a
1304 recent 2.1.x change.
1306 kes Move bnet_despool() into class in bsock.c
1307 kes Modify job report to include director name and Build OS.
1308 kes Move drop root privilege and check_catalog() before fork.
1309 kes Add update database scripts (version 9 to 10) to updatedb directory.
1311 ebl Check size and age of each file after its backup to see if
1312 it has changed during backup, if 'checkfilechanges' is set.
1313 The FD will do an extra check (stat(2)) after
1314 each file backup. mtime, ctime and size are compared with
1315 'before backup' information. If time or size mismatch, an
1316 error message will be generated. You must upgrade FD to use it.
1318 kes Make database name and user configurable
1319 --with-db-name=xxx --with-db-user=xxx
1320 kes Add back database type to message.c for debugging.
1322 kes Implement dir_sql() which issues an SQL query.
1323 kes Modify bat medialist to use dir_sql() and do some minor C++
1324 formatting as well as eliminating a number of pointers, simplifing
1327 kes Fix some of the mtx-changer grep commands for tape label readers.
1328 kes Convert a number of bsendmsg into the appropriate send/warning/error
1329 message class calls.
1330 kes Suppress the using database message in the .sql command.
1331 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1333 kes Add context menu for floating a window.
1334 kes Some minor cleanup and name changes in qt-console
1335 kes Add doing mt setblk 0 in Win32 mtx-changer.
1336 kes Apply Martin's bug fix to move definition of ENODATA for
1338 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1339 sqlite2 and sqlite3.
1341 kes More pruning cleanup.
1342 kes Turn on wait_for_drive by default in mtx-changer.
1343 kes Turn on Batch insert code by default as it now passes regression.
1344 kes Add ./configure --enable-bat to enable building of Bat.
1345 No install yet though.
1347 kes Implement a new .sql command for bat.
1348 kes Implement code to turn off pruning in obtaining the next volume.
1349 Pruning is turned off for the status dir command, but turned on
1350 for SD requests and for the list nextvolume command.
1352 kes Correct Qmsg() that was not updated correctly when committing a
1353 previous change (probably the recent TLS patch).
1355 kes Write new subroutine is_volume_purged() that explicitly checks
1356 if the Volume is purged, and if so marks it as such. This should
1357 resolve problems reported about needing to mount twice to recycle
1359 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1360 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1361 amount of duplicated code.
1362 kes Do volume pruning only for the Media Type desired (reduces pruning time
1363 if multiple Media Types are in the same pool).
1364 kes Implement more detailed info in the Job report for the Bacula version
1366 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1368 ebl Add bbatch tool to bench database and insert mode.
1369 Fix sql quote stuff in batch mode
1370 Fix sql stuff for mysql
1372 kes Correct problems with am/pm scheduling. Fixes bug #808.
1373 kes Implement new prunning code that prunes up to 1000 jobs at
1374 the same time. The same technique can be applied to a number
1375 of other prune/purge subroutines.
1376 kes Add an insanity check when starting a new tape job to ensure
1377 that the tape position has not been changed. If so fail the
1379 kes Fix Win32 build for dlls to add the folllowing:
1380 src/lib/bsock.c -- new file with new entry points
1381 src/lib/dlist.c -- new entry points
1382 src/cats/sql_create.c -- new entry point
1383 src/cats/sql_cmds.c -- new DATA item exported
1385 ebl batch mode cleanup bscan-test is ok now.
1386 kes Implement SD code to check length of disk volume before appending.
1388 kes Correct return status on db_batch... routines.
1389 kes Add call to db_write_batch_file_records() to migration code.
1390 ebl Fix AfterJob timing
1391 kes Move the checking of the database in initializion of the Director
1392 to after we drop privileges. This avoids the need for both root
1393 and bacula access to the DB.
1394 kes Correct a misplaced variable definition in src/filed/backup.c
1395 kes Correct how the new batch insert db_create_attributes_record()
1396 uses the arguments. Caused a seg fault in bscan.
1397 kes Implement lock() and unlock() methods in DEVICE class.
1398 Implement block() and set_block(xx) methods in DEVICE class.
1399 kes Modify bnet_connect() so that it uses time() to check for the
1400 wait time expiring (on some OSes, some system calls may not
1401 return immediately).
1402 kes Modify Verify to obtain the previous JobId when it is actually
1403 running rather than at schedule time (as it was in 1.38.x).
1404 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1406 kes When checking pid in pid file, continue running if the pid is
1407 the same as ours. This occurs on IRIX after a system crash.
1410 kes Extend new GUI API.
1411 kes Make the ua structure a class, and implement send_msg(),
1412 error_msg(), warning_msg(), and info_msg().
1414 kes Apply fix from for building wx-console on the Mac from
1416 kes Implement new select mechanism for GUI programs.
1417 kes Reorganize initialization of stackedWidgets in bat.
1419 kes Add updated nagios plugin supplied by Christian Masopust.
1421 kes More bat implementation.
1422 kes File migrate bug with Pool Occupancy using mediaid instead
1423 of jobids. Fixes bug #795.
1424 kes Fix orphaned buffers in filed backup and verify due to
1425 crypto buffers not freed during errors. Fixes bug #789.
1426 kes Extend new GUI api code to tree commands.
1427 kes Ensure that tree and dot commands check console ACLs.
1428 kes Permit marking directory with trailing slash.
1429 kes Allow 20 console connections (instead of only 10).
1431 kes Add smartctl call to bacula-sd.conf as an example of getting
1434 kes Modify jobq.c to let simultaneous restore jobs run. This may
1435 cause them to fail if they cannot get a drive.
1436 kes Add Client Connect Wait to Storage daemon to permit users to
1437 modify the time the SD waits for a FD connection.
1439 kes Correct virtual changer check which was backwards. This caused
1440 volumes to be unloaded into slots already occupied.
1442 kes Apply Command ACL filter to JobId list in restore command.
1443 kes Correct typeo in var.c patch.
1445 kes Don't let Bacula prune File or Job records for the current Job.
1446 kes Fix variable substitution pad + inc bug reported (with patch)
1449 kes Correct SQLite log table index as reported by Luca Berra.
1451 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1453 kes Begin implementing new comm signals for API.
1454 kes Fix a few places in lib/message.c where the open fd may
1456 kes Continue implementing lib/bsock.c (real class). Make jcr,
1457 who, host, and port private. There are new methods to access
1458 them for non-class use. This required touching a number of files.
1460 kes Add LANG=C to autoconf/randpass so it works with languages other
1461 than English. Fixes bug #788.
1463 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1465 You will not be able to generate Include/Exclude list any more.
1466 It will be fixed soon.
1467 If you want to use this, you can apply
1468 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1470 kes Restore of sockets created false error messages because Bacula
1471 no longer restores sockets, but the code was still trying to
1472 set the attributes on a non-existent file. Reported by a user.
1473 ebl finish RecyclePool feature
1474 Media will takes Pool.RecyclePool
1475 when moving from Scratch to a Pool or when user will do
1476 update volume=xxx frompool
1477 To use it, add RecyclePool = aPool to your Pool resource
1480 RecyclePool = Scratch
1484 kes Expand new BSOCK class adding signal() and new BNET signals.
1485 kes Begin enhancing the dot commands adding a new API function
1486 that returns more information and will make it easier
1487 to interface to the Director from a program.
1489 kes Make DEVICE fd private. Its new name is m_fd, and can be
1490 obtained with dev->fd() outside the class. This is the
1491 first of many DEVICE members to be made private.
1492 kes Implement Michael Renner's idea on having a virtual disk
1493 changer. I made some minor modifications (e.g. I did not
1494 implement the Virtual Changer directive, but simply set
1495 the Changer Command to an empty string.
1497 kes Implement a BSOCK send() method that writes the whole record
1498 in a single write() request rather than in two.
1499 ebl add update volume=xxx recyclepool=yyyy
1500 volume takes recyclepool from pool when using update volume=xxx from pool
1502 kes Fix encryption deblocking bug, which caused some restored files
1503 to be truncated. This fixes bug #763.
1504 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1505 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1507 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1508 ebl Use btime_t instead of uint64_t in media patch.
1510 kes Optimize the use of the database a bit in the Status dir command.
1511 Only open it when needed, ensure that if any previous database
1512 was opened, it is closed.
1514 kes Correct VolCatBytes bug from media patch.
1515 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1516 in the case of orphaned records.
1517 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1518 and File records in 300K chunks to be more efficient. This
1519 idea came from Juan Luis Frances (if I remember right).
1520 kes Apply Eric's scratch patch that moves a purged Volume to
1521 the RecyclePool. Question: how is RecyclePool set? what
1522 happens to the ScratchPool?
1523 kes Apply Eric's media patch that collects read/write media
1524 times as well as byte counts. This patch requires a
1525 simultaneous upgrade of the DIR and SD. Note, there
1526 should be some way to turn off timing. I'm not sure
1527 times are in Bacula units.
1528 kes Apply Eric's batch-insert patch.
1530 kes Update projects list.
1532 kes Implement Include/Exclude file lists in FD as dlists using
1533 the new dlistString class. This permits efficiently having
1534 large include/exclude lists and completes project Item 25.
1535 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1536 console is authorized to cancel the job. This fixes bug
1538 kes Modify SD so that the VolCatJobs medium record is updated
1539 at the beginning of a Job rather than the end. This
1540 fixes bug #775 where exceeding MaxVolJobs caused jobs
1542 kes Added a mutex around getting and setting Volume information
1543 so that multiple simultaneous jobs will single thread.
1545 Switch to using Subversion
1546 kes Remove src/pygtk-console/ from configure
1548 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1549 plus the entrypoints.
1550 kes Apply patch supplied that corrects debug print
1551 in canceling jobs for max run time. Supplied as
1552 part of bug #621, which was previously fixed.
1554 kes Test on job_canceled() and sd_msg_thread_done inside
1555 loop starting the message thread to avoid a race condition.
1557 kes Remove rl_catch_signal from console.c as it conflicted
1558 with the header definition. Fixes bug #765.
1559 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1561 kes Clarify some stored/acquire messages to indicate if the
1562 problem is with read or append.
1564 kes Fix memory leak with storage ids in cats/sql_get.c
1565 kes Terminate watchdog earlier to avoid reference to released
1566 memory -- reported by Jason Austin.
1567 kes Move closing the database from jobq.c to the director daemon
1568 termination routine. This fixes memory leaks for shadow jobs
1569 (i.e. migration jobs).
1570 kes Free up the unique jobid chain items in migrate.c. This fixes
1571 a memory leak problem.
1572 kes Convert some ugly looking for statements to use foreach_alist
1573 in findlib/find.c. This will facilitate converting the structures
1574 to use dlist (for large include/exclude lists).
1575 kes Fix a bug in the btree.c and btree.h routines, then rename them
1576 rblist and add them to be built in src/lib. Include some new
1577 methods written by Rudolf Cejka that make the code more readable
1578 (hides some of the ugly casting).
1579 kes Add set_next() and set_prev() methods which make the code much more
1580 readable. Also add a new dlistString class that facilitates storing
1581 strings in dlists. To be used in the large include/exclude lists.
1582 kes Make some trivial modifications to lib/tree.h that use rblist
1583 rather than dlist for storing the tree links. This was suggested
1584 by Rudolf Cejka. The result of this is that the restore tree now
1585 uses red-black binary trees rather than simple linked lists. This
1586 should give rather dramatic speed improvements for directories
1587 contining large numbers of directories/files (more than 10000).
1589 kes Fix maxruntime bug #621.
1591 ebl Implement the include JobID in spool file name project.
1592 kes Reorder projects file in order determined by Jan 2007 vote.
1593 kes Implement item #12 on project list -- quick release of FD by
1595 kes Fix open of SQLite3 db where user does not have write permission
1596 so that DIR does not crash. Fixes bug #761.
1598 kes Add back missing @ in Win32 Makefile.
1599 kes Change 'Device not configured to autolabel' from INFO
1601 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1602 which should restart an indefinite # of times.
1603 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1604 other DIR specifications.
1606 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1607 Fix path quoting in SQLite scripts.
1608 Fix problems with SHGetFolderPath.
1610 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1612 kes Fix Job restart on error bug that promotes an Inc to a Full
1613 backup. This should fix bug #755.
1614 kes Add qt-console and first cut of code.
1618 kes Fix Bacula->Documentation link on Win32 to point to index.html
1619 instead of bacula.html. Fixed bug #750.
1620 kes Return JobId in db_get_job_record() when JobId==0. This should
1622 kes Do not release source pointers when restarting a failed job.
1624 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1625 This *should* fix bug #747.
1626 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1629 kes Modify USTORE constructor to set an empty store_source string,
1630 and don't copy the store_source string in a cancel. Hopefully
1631 this will fix Arno's seg fault, bug #744.
1632 kes Add back code to disable conio in configure. Fixes bug #743.
1633 kes Correct the Options scanner in the FD to correctly handle
1634 SHA1 option, which was eating the next option. Reported by
1636 kes Add code to indicate when the SD is spooling, spool wait, and
1637 despooling as requested by Alan Brown.
1639 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob