1 Technical notes on version 2.4
5 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
6 mt. This fixes bug #1116.
7 kes Fix failure of 2drive-concurrent-test. Always read label;
8 clear_unload() only after drive is defined in acquire_for_read().
10 Release Beta version 2.4.1-b1
12 kes Back out bad src/lib/base64.c change.
14 kes Generally clean up the manual tape loading code. The main
15 conceptial change is that when a volume is marked to be unloaded,
16 its volume name is retained, and it is only marked as unloaded
17 when either the autoloader says it is unloaded or another tape
18 is read on that drive.
20 kes Fix a recycling problem with two autochangers reported in bug
21 #1106. This may also (unlikely) fix a second recycling bug as
23 kes Fix a SD lock volumes deadlock problem reported in bug #1100.
25 kes Fix format problem in bscan output reported in bug #1105.
27 kes Copy more data when restarting a job so that run
28 overrides are kept. This should fix bug #1094.
29 kes Backport updates to jobq.c where possible.
31 kes Fix bug where SD did not ask operator if the device could not
32 be opened. Reported by Eric.
34 kes Add dbuser to DIR conf file (replaces user).
35 kes Add --with-db-password to ./configure
36 kes Fix regress to handle db_password.
37 kes Fix a couple of pedantic compiler warnings.
38 ebl Fix bug when starting a restore on a storage that doesn't
39 have the requested MediaType.
41 kes More work on word alignments -- eliminate all ints from
42 the configuration routines.
44 kes Fix bug reported by Scott Barninger where the bacula script
45 refers to scripts in the wrong directory. Needed to meet the
46 requirements of recent FHS location changes.
47 kes Fix word alignment problem on non-Intel 64 bit machines
48 such as Solaris. This should fix bug #1097 -- bus error in SD.
50 kes Add missing win32/patches/wxWidgets.patch to 2.4 repository.
54 kes Update version to reflect the magnitude of the SD changes.
56 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
59 kes Add create_postgresql_database.sql to Win32 installer. Should
60 fix problem reported by Juilio Monteiro.
61 kes Get correct slot when auto unloading a device. This fixes bug
64 kes Fix multiple media restore.
65 kes Make DEVICE Slot private and access it via a method.
66 Allows better control over when it is set and cleared.
67 kes Fix possible seg fault if SQL error.
69 kes Add debug code to SD.
70 kes Fix renaming a Volume, which used the wrong Volume name.
72 kes If operator has rewind tape, print warning, release tape and
73 try once more. If tape is positioned somewhere, something went
74 wrong, so mark the tape in error and try once more. Previously
75 this error was fatal, now it produces an error message.
76 kes Ensure correct volume name displayed during restore
77 kes Ensure that Volume is mounted for restore.
79 kes Fix a few more Coverity reported problems.
81 Beta Release Version 2.2.10-b4
83 kes Enhance a couple of SD debug messages.
84 kes Tweak unload flag setting and ensure it is set during swap.
86 ebl Fix #1091 about bad output in estimate command.
88 kes Modify autochanger locking to attempt to avoid race
90 kes Make sure device not busy before doing label command.
91 kes Display open() errors except when polling. Previously too
92 many were suppressed. This should fix bug #1070.
93 kes Fix Win32 reparse points. Bacula will not recurse into any
94 reparse point directory, including mount points, unless the
95 directory is explicitly mentioned at the top level (same as
96 with Unix). A file that is linked to another file will be
97 backed up -- much as Unix does for hardlinked files.
100 kes Remove double quotes from ChangeLog and ReleaseNotes
101 kes Remove StorageId test when pruning and recycling (Eric's changes).
102 kes Remove old form of locking when getting volumes -- causes deadlock.
104 kes Fix buffer overruns detected by Coverity.
106 Beta Release Version 2.2.10-b3
108 kes Tweak joblog display.
110 kes Implement --without-qwt
111 kes Fix layout of restore tree dialog
112 kes Add configure bat QWT libraries, so that bat can be built
113 with or without the QWT libaries.
115 kes Apply batfix bat cleanup patch from Riccardo.
116 kes Make sure we unload the right slot when swapping.
118 kes Improve SD reserve debug code.
119 kes Testing an improvement to free up volumes no longer in use.
121 Beta Release Version 2.2.10-b2
124 kes Rework SD acquire for read to handle autochanger Volume
126 kes Implement regression that explicitly tests swapping a Volume
127 from one drive to another.
128 kes Enhance disk-changer to detect most error conditions.
129 kes Fix SD code so that it properly swaps a Volume between drives.
130 This fixes bug #1083.
132 kes Prevent a Volume that is being swapped from being freed from
133 the volume list. This will most likely fix, at least partially,
135 kes Fix strippath so that it does not get a buffer overrun and crash FD.
136 This fixes bug #1078.
137 kes Make inability to change owner/group when creating a dir only a
138 warning rather than an error.
140 ebl Fix SQL query in migration code
142 kes Force unload of volume when wrong volume mounted in SD.
144 kes Fix bat seg fault at termination.
145 kes Add Bacula generated version to bat about box.
147 Beta Release Version 2.2.10-b1
149 kes Permit multiple simultaneous restores -- experiment.
151 kes Backport development stream SD reservation system changes.
154 kes Move final volume swapping code to DCR method and
155 call it from acquire_for_read().
156 kes When wrong volume is mounted during read, unload_autochanger.
158 kes Stop searching for Volumes in SD askdir if DIR returns the
159 same volume name twice in a row.
161 kes Tweak the swap Volume from one drive to another code so that
162 it now seems to work.
163 kes Resolve several problems with recycling that broke the new
164 code (these problems are in 2.2.9 as well).
165 kes Remove the volume lock when calling the sysop code.
166 kes Don't mark a reserved volume with no writers as unused otherwise
169 kes Rework class structures for VOLRES, DCR, and DEVICE to make
170 the method names a bit more logical, and for more logically
171 handling the responsibilities.
173 kes Remove redundant code in terminating the scheduler that just
174 causes a seg fault in many cases.
175 kes Cleanup releasing a volume and make it a DCR method.
176 kes Improve algorithm for detecting pre-reserved volume and
179 kes Tweak volume swapping code so it works.
180 kes Correct name overloading in mount.c
181 kes Replace released flag in VOLRES with reserved and add access
182 methods for the VOLRES class.
183 kes Prevent volume from being released while being swapped.
184 kes Refactor parts of stored/mount.c
186 ebl Add sanity checks for VolWriteTime and VolReadTime
187 ebl Take care of bad clock changes while computing VolWriteTime
188 and VolReadTime. This should fix or limit #1066
189 kes Correct error string numbers in dird/catreq.c
190 kes Restructure reserving, acquiring, and mounting volumes. Calls to
191 autochanger are deferred for mount.c -- simplifes the code.
193 kes Do not prune any running job. It just fails the job.
194 kes Lock the volumes when changing dev->reserved_device and marking
195 the volume unused otherwise the device can get reserved by
196 another job before the volume is released, thus blocking it.
199 Beta Release Version 2.2.9-b7
201 kes Close bat console windows first to eliminate error message
203 kes Remove useless code in Scheduler that causes seg fault on
205 kes Correct some SD catalog request error messages.
206 kes Don't allow pruning of any running job.
207 kes Turn off code in read_record that causes a seg fault in the SD
208 when reading past an EOS_LABEL.
209 kes Turn off unloading the autochanger in reserve.c as it just
211 kes Lock volumes when unreserving a device.
212 kes Do not mark volume unused when recycling.
213 kes When acquiring, don't mark volume unused if it is reserved (busy).
215 Beta Release Version 2.2.9-b6
217 kes Eliminate ./configure warning on po directory
218 kes Fix bug #1063, reuse of freed ptr in list nextvol.
219 kes Release regex compile buffer in filed/job.c
220 kes Add proper type of const char in sql_create.c
221 kes Turn off debug in daemon termination routines
222 kes Move free_volume_list() before devices are freed in stored.c
223 kes Fix reference to uninitalized stack variables in bregex.c.
224 This should correct bug #1067.
226 kes Fix possible seg fault in SD when freeing a volume entry.
228 kes Apply patch from bug #1069 that corrects spurious error messages
229 when ACLs enabled on SGI but no ACL exists.
230 ebl Fix a storage deamon segfault at debug level 500.
232 Beta Release Version 2.2.9-b5 -- not released
234 Beta Release Version 2.2.9-b4
236 kes Re-enable code to remember last volume mounted on a non-tape
238 kes Add patch supplied in bug #1068 that fixes a SD crash when using
239 a Virtual autochanger.
240 kes Generate correct JobMedia records during spooling/despooling when
241 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
242 <tih@hamartun.priv.no> for excellent analysis and testing.
244 Beta release Version 2.2.9-b3
246 kes Rework certain SD locking based on gdb tracebacks of deadlocks
247 sent by Eric. This code now uses only the volume_lock() rather
248 than the reservations lock when at EOM and acquiring a new
250 kes Ensure only one exit point in several subroutines.
252 Beta release version 2.2.9-b2
254 kes Fix to initial tape drive open to release the volume name
256 Beta release Version 2.2.9-b1
258 kes Fix to JobMedia fix.
259 kes Fix bug pointed out by Peter Much that causes the StorageId to
260 be updated when reading a tape (during migration, it could have
261 been incorrectly set to the write StorageId).
263 kes Implement autostart scripts for Debian
265 kes Fix mtx-changer.in for broken Debian mt program.
267 kes Massive commit of all fixes and back ports to create 2.2.9
269 kes Apply doc fix from bug #1062.
270 kes Resolve crash and improper restore wx-console Win32 restore
271 GUI. Fixes bug #1065.
272 kes Update Win32 wxWidgets to latest version.
273 kes Attempt to do correct handling of Win32 mount points. Should
275 kes Fix Win32 FD backup/restore memory leak due to improper termination
276 of BackupRead/Write. This fixes bug# 1038.
277 kes Add const to AIX prototype for initgroups()
279 kes Undo bug #1047 heap overrun fix as it is not correct.
281 kes Fix creating first JobMedia record during Migration to include
282 proper index. This caused slow restores of migrated jobs.
284 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
285 and do not strip paths on symbolic links.
286 kes Set catalog backup database and user name from values specified on
287 the ./configure line.
288 ebl Apply patch to correct bug #1031, about wrong pool source information
291 Release Version 2.2.8
293 kes Apply patch from Martin to correct bug #1040, bscan sets existing
295 kes Fixed important spelling error in doc -- bug #1045.
297 kes Move initialization of read/write res lock earlier in the code.
298 This fixes the crash with a null conf file. This fixes bug
300 kes Redefine CURES in lib/parse_conf to be URES and move it all
301 into lib/parse_conf.c -- this responds to bug #1042, but does
302 not fix it. The fix is not to compile with FORTIFY_SOURCE.
303 kes Backport fix de-referencing a NULL pointer in the scanner from
304 the trunk SVN. I don't think this was reported as a bug.
306 Beta release Version 2.2.8
308 kes Re-enable the new job code editing (%f).
310 kes Fix bsnprintf for float point numbers. I broke recently when
311 parameterizing some variables. This fixes bug #1036.
313 kes Move Heartbeat documentation from Job to Director resource.
314 This fixes bug #1033.
316 kes Fix existing switch drive SD code to call autochanger to release
317 any old volume. This must be done to keep the autochanger from
318 releasing subsequently newly reserved volumes in doing a close().
319 This should possibly fix bugs #1032 and #1018.
320 kes Apply big backport of current SVN SD code that corrects a number
321 of race conditions. This is a first step in fixing bug #1018.
323 ebl Fixes bug #1028 where "Selection Type" option was not usable
327 Release Version 2.2.7
329 kes Partial back out (disabled) %f job code editing because it
330 does not build on Win32.
331 kes Fix seg fault Frank Sweetser reports in regression testing
332 on his systems. The problem was that the original author of
333 bsnprintf.c did not take into account the side effects of
334 using ++x in the argument to a #define.
336 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
337 that implements double quoting include names in conf files,
338 and also allows piping input by having the first character
339 be a vertical bar (|).
340 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
341 that implement %f in RunScripts to pass the FileSet name.
342 kes Skip leading | when lex input comes from a pipe as suggested
343 by Michael Stapelberg <michael@stapelberg.de>.
345 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
346 Nerijus Baliunas <nerijus@users.sourceforge.net>
348 kes This patch corrects a problem where the maximum concurrent storage
349 jobs counter gets out of sync during restore jobs causing jobs to
350 'wait on max Storage jobs'. This patch fixes bug #1009.
352 kes Add new include to postgresql.c suggested by Marc Cousins so
353 that it compiles correctly with pgre version 8.3. Also fix
354 misuse of %x with pointer (should be %p).
356 kes This patch fixes bcopy so that it produces correct Volumes.
358 kes This patch eliminates spurious output to the console during a VerifyVolume
359 job that contains encrypted data. It fixes bug #1024.
361 kes This patch prevents the 'status dir' command from trying to use a scratch
362 volume and possibly moving it from one pool to another. This patch fixes
365 kes Fix --archivedir addition to configure. Replace it with
366 --with-archivedir in configure.in This fixes the regression
368 kes This patch fixes bug #1012 where the job is canceled because
369 of Max Run Time exceeded when the job has not yet started.
371 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
372 one 'part' to write. Instead of each part being stored on disk,
373 written to DVD, then deleted from disk, all parts are written to disk,
374 and only the last is written and deleted from disk.
376 kes Correct typos in disk-changer.in
378 kes This patch fixes the status command to include the formating string for
379 JS_AttrInserting. It fixes bug #1021.
380 kes This patch should fix the Mac OS X build problem on the latest
381 Darwin, where sys/types.h was not included correctly (apparently
382 due to a change in the Mac headers). The solution was to explicitly
383 ensure that it is defined for the ./configure.
384 This patch also has a rebuild of configure that includes the Debian
385 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
386 kes This patch should ensure that queued messages to the console are
387 displayed as soon as possible. It should fix bug #1007, but has been
388 reported not to work.
390 kes This patch fixes the infinite loop when trying to increase the
391 maximum number of volumes in a Pool during the add command.
392 This patch fixes bug #1008.
394 Release Version 2.2.6
396 kes Get fix for joblist bug in bat from trunk.
398 kes This patch fixes bug #1003 where putting the message output from
399 a Verify job into the catalog results in a recursive loop. The problem
400 seems to show up only with postgresql (to be verified).
402 kes Fix bug #942 where lots of emails where generated when the heartbeat
403 interval was low and Bacula wanted a different tape from the one in
406 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
407 which was updated during a restore (or a reading migration) bug #982
409 ebl Use qmake-qt4 instead of qmake when available (debian system).
411 kes Add a security warning to src/cats/make_catalog_backup.in indicating
412 that passing the password via the command line (arg 3) is insecure.
413 This responds to bug #990 (it doesn't fix it).
414 kes Apply 2.2.5-postgresql-errors.patch
415 kes Remove unneeded File table index on JobId, which is already
416 present as the first index of another multi-index.
418 kes Set default debug_level to zero. This corrects bugs #991 and #993.
419 kes Fix a crash in bat when it cannot connect to the Director for example
420 if the Director is not running.
422 kes Activate Close button on tray-monitor window. This fixes
425 kes Fix spurious warning message printed when creating a volume with
426 a LabelFormat. This fixes bug #976.
428 Release Version 2.2.5
430 kes Add JobId in place of Job name in all the Jmsg() output.
431 kes Correct the APP_DESC for the Win32 storage service (remove an e).
433 kes Add new SD despooling attributes and Dir inserting attributes
434 job status codes. This fixes bug #961.
435 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
437 kes Fix doc issue. This fixes bug #963.
438 kes Fix listing performance problems in bat. Pointed out by
440 ebl Fix replace on restore. This fixes bug #969
441 kes Fix bat code that tests for Win32. This should fix bug #968
442 kes Query 5 list wrong Vol after migration. This fixes bug #960
444 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
445 in back porting from 2.3.x
447 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
448 The details are included in the notes in this file.
450 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
451 messages; it fixes a problem opening the SQLite3 database when multiple
452 simultaneous jobs were running; it fixes a bug with certain versions of
453 MySQL where batch inserts failed because of table name character case
454 (upper/lower) differences.
455 kes Fix race condition that drops final block written to volume.
456 This happens in rare cases with multiple simultaneous jobs
457 when the Volume fills. This fixes bug #964. May be related
458 to bug #935 and possibly #903.
460 kes Fix FD->SD authorization failure, which was due to spurious
461 wakeups from a pthread_cond_timedwait(). Simply check the
462 predicate before continuing. This fixes bug #953
463 dvl Add new configuration item --archivedir
464 dvl Adjust regression tests to use tmp not /tmp. This will allow
465 multiple concurrent runs of the regression tests.
467 kes Eliminate more strerror() and replace with bstrerror().
468 kes Remove BSD getopt and replace with unrestricted IBM version.
469 kes Fix Win32 build for changed calling sequences.
471 kes Fix FD->SD authorization failure, which was due to spurious
472 wakeups from a pthread_cond_timedwait(). Simply check the
473 predicate before continuing. This fixes bug #953.
474 kes Add const char where needed (more to do).
476 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
477 kes Don't overwrite error message in check_tables_version.
479 kes Unlock batch insert tables with same calls used elsewhere.
480 kes Allow starting 59 jobs a second.
481 kes Make SD session key more random.
482 kes Add retry for SQLite opening db if it fails. Probably helps
484 kes Suppress extra error messages during batch insert failure.
486 kes Put some FD auth code on dbglvl rather than fixed.
487 kes Return insert attributes error message in db msg buffer to avoid
488 false error messages. Helps fix bug #966.
489 kes Separate batch init error messages. Probably helps fix bug #966.
490 kes If Dir gets an error during inserting attributes, cancel SD.
491 This reduces unnecessary error messages.
493 ebl Cleanup batch insert code. Probably fixes bug #965.
495 kes Turn off some code when batch insert not enabled.
496 kes Edit FD name in connect error messages.
498 kes Add code to handle tray monitor separated from Win32 FD.
499 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
501 kes Fix ANSI tape labeling. This fixes bug #954.
502 kes Increase the max block size to 4MB fixes bug #957.
503 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
504 is not properly mounted (recognized) during a poll.
505 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
506 Job that has differences reports Verify OK.
507 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
509 Release Version 2.2.4
511 kes Increase size of name string when FD making connection to SD.
514 kes Add waits to multiple exit detection code to try to force pid
515 file to always be deleted.
516 kes Restore good dev.tar.gz to rescue set appropriate binary property.
518 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
519 trying to switch drives by checking for blocking before unblocking.
521 kes Cancel storage daemon in all cases where FD reports error. This
522 should fix virtually all cases of bug #920.
524 kes Fix error message that was clobbered when Dir tells SD it does not
525 have write permission on Volume. This should fix a minor point
526 in bug #942, but not the main problem.
527 kes Add code to cancel job in SD if FD connection fails. This should
529 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
530 kes Fix migration code to get correct Volume name with multiple volumes
531 by skipping |. Fixes bug #936.
532 kes Implement patch supplied by Landon to fix bug #944 where using
533 TLS with bconsole uses 99+% of the CPU.
534 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
536 kes Move patches into patches directory.
538 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
541 ebl Using 'm' in bconsole will show messages like before,
542 and not memory usage.
544 Release Version 2.2.3
545 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
548 kes Fix bug #935, and probably also bug #903 where files were not
549 restored. MediaId was not properly set in JobMedia record after
552 kes Add ./configure search in qwt-qt4 for qwt package
553 kes Apply Martin Simmons patch that should turn off the new API usage
554 when batch insert is turned off allowing building on older
557 Release Version 2.2.2
559 ebl Detect if new PosgreSQL batch insert API is present.
560 kes Correct incorrect mempool call causing Director crash.
561 sb Update spec files for 2.2.1 release
563 Release Version 2.2.1
565 kes Update POTFILES.in
566 kes Cleanup a few underquoted AC_DEFUNs in configure
567 kes Apply patch from Martin Simmons that adds a test for va_copy to
570 kes Fix bug #921 by increasing the number of tries to create a new volume
572 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
573 can be called multiple times. Implement a version for machines
574 without va_copy() that gets a big buffer.
576 kes Integrate more portable zone offset code into bsmtp.c
577 Submitted by Attila Fülöp.
579 kes Fix bad SD->FD return status reported by
580 (James Harper) <james.harper@bendigoit.com.au>
581 ebl Fix a bug in read_close_session which return random status
582 thanks to James Harper
584 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
585 and directory names during restore of single file/directories.
586 kes Add sanity checks to .sql command when string is empty. Hopefully
587 that will resolve Dirks Director crash.
589 kes Apply patch submitted by Martin Simmons that corrects a seg fault
590 in the bsmtp chat subroutine when debug is >= 10.
592 kes Fix Director crash when running bat SQL queries.
593 kes Add David's notes on Item 8: Copy pools.
595 kes Rework projects file to be current and ready for a vote.
596 kes Enhance lex scanner error message.
598 kes Tweak LICENSE file to mention BSD code.
599 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
600 if specified on the ./configure.
601 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
602 This class is intended to allow us to open a second bsock to the
603 Director while in the restore subdialog.
605 kes Fix configure to create bat Makefile before creating dependencies.
606 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
607 kes Add a tooltip to the tray monitor.
608 dvl Set the Director's PID file before dropping privs. This fixes
611 kes Update AUTHORs file
612 kes Increase the default max concurrent jobs to 20 in FD and SD to
613 correspond with the default .conf files.
614 kes Rewrite the Win32 service routines. This eliminates the 3 copies
615 some different, of the same file created by RN when porting the
617 kes Rearrange some of the Win32 directories and the placement of the files
619 kes Set DEVELOPER flag in version.h
621 ========================================================================
622 Release Version 2.2.0
624 kes Apply a second doc patch from Marc.
625 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
626 improves the tips section that discusses how to setup multiple
629 kes Update bat README file.
630 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
631 corrects a typo in the Recycle status check in db_find_next_volume().
632 This will probably fix a number of annoying problems with multiple
634 kes Modify most of dird/msgchan.c to use bsock class calls rather than
635 bnet calls -- no functionality change.
637 kes Modify the Verify output to specify if files are missing on
638 the Volume(s) or disk. Fixes confusion in bug #916.
639 kes When more than one Volume is read in a migration job, the last
640 Volume bytes reported are from the last read volume rather than
641 the last written volume. Fixed. This fixes bug #910.
642 kes Fix display of Recycle flag after update volume=foo recycle=yes.
643 It previously printed New Recyle flag is: no. This fixes bug
646 kes Correct seg fault when switching tape drives during restore.
647 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
648 be used until after 2.2.0 release.
650 kes Remove fnmatch() in SD that permitted wild card specifications.
653 kes Fix %g in filename returned by SQL for browse tree reported by
655 kes Fix configure so that it puts config.out in the cwd rather than
657 kes Attempt to fix the locking problem reported by Eric in bug #906.
658 kes Make berrno class to leave errno unchanged after constructor call.
659 kes Make bnet_server use the heap rather than the stack to allocate
660 its socket fd pointers to avoid a crash at termination. Problem
661 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
663 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
664 and putting it in depkgs-qt along with Qt4.3.
666 kes Rework code in acquire.c that switches drives for reading when
667 the Media Type does not match. This should fix bug #906
669 ebl Fix a director segfault during job setup #907
670 kes Correct seg fault in postgresql when first operation returns no
671 rows. Fixes Dirks File browser problem seg fault with bat.
673 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
674 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
677 kes Implement PopUp YES/NO dialog for bat.
679 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
681 kes Correct RunScript to terminate job in FD on failure.
682 kes Change abort_on_error and AbortJobOnError to fail_on_error
683 and FailJobOnError in RunScripts.
684 kes Minor tweaks of code formating in RunScripts, principally to
685 avoid depassing 80 columns.
687 kes Eliminate one #ifdef Win32 in bsmtp
688 kes Implement grow tool to grow a file for testing very large databases.
689 kes Add big-vol-test to test Bacula seeking with > 5GB.
692 kes Modify find_next_volume() to return all values in Media record.
693 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
697 kes Update Release notes
699 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
700 Warning, in previous beta version, all media get from scratch keep their
703 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
704 This should fix bug #842. Made a note to look at removing the temp
705 files at the end of the install.
706 kes Add ability to mount and unmount a file device providing it is
707 marked as being removable and has the appropriate mount and unmount
708 commands defined in the Device resource. This fixes bug #830.
709 kes When applying a storage override, release all previous storage
710 definitions rather than just prepending the new storage.
711 This should prevent a good deal of confusion.
713 kes Implement ./configure search for qwt libraries.
715 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
716 Win32 FD. This should fix bug #893.
717 kes Remove an unnecessary beep in Win32 init code.
718 kes Update copyright dates in Win32 executable about boxes.
719 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
720 code with a BSD getopt.c and getopt.h.
721 kes Remove sched.h from the Win32 compat directory -- not used.
722 kes Remove the Exit menu item from the Win32 tray monitor. If you really
723 need to shut it down, do it through the services panel or the command
725 kes Remove some inappropriate Bacula FSFE copyrights.
726 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
727 kes Fix regress config non-portable test as pointed out by
728 Florian Heigl <florian.heigl@gmail.com>
729 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
730 as pointed out by Florian Heigl <florian.heigl@gmail.com>
732 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
733 Reported by Frank Sweetser.
737 kes Fix client-only build.
738 kes Integrate client-only fixes for bsys (initgroups) and conio from
739 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
740 kes Make arguments to get_scratch_volume() in same order as other
742 kes Rework the prune_volumes() subroutine so that after purging and
743 no volume found in desired pool, it will check for a scratch
744 volume. This prevents recycling the whole scratch pool.
745 kes Add code to status storage to print boffset_t (largefile support).
747 kes Move qwt (Graphics libarary for Qt4) to depkgs.
748 kes You now need a --with-qwt=<dir> to be able to build bat.
749 kes Update src/win32/cats/bacula_cats.def to include the new
750 db_get_query_dbids() call on Win32.
752 kes Correct a problem when selecting a scratch volume and moving
753 it to another pool that lost some columns.
754 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
755 kes Enhance Autochanger error messages to include Volume and device name.
756 kes Rework prune_volumes() code to take account of InChanger flag,
757 and to handle recycling volumes going to the Scratch pool and
758 current pool because the RecyclePool directive.
759 kes Implement a better and more efficient db_get_query_dbids() to
760 handle creating and passing back a list of DBIds.
764 kes Start work on new more efficient DBId subroutine. First use
765 will be for recycling volume to Scratch inchanger.
766 kes Increase number of JobIds in pruning from 1000 to 10000.
767 This to be replaced by above routine.
768 kes Begin implementation of building Qt4 on Win32.
769 kes Correct typo in fix I added for bad TLS shutdown.
770 kes Pull 2.0.3 patches into patches directory.
771 kes Update Release notes. Include qt-console in line count.
772 kes Update Projects file.
774 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
775 bug in migration code where a job that spanned two volumes
778 kes Implement new BST_DESPOOLING blocked state. Change from locking
779 during despooling in SD to blocking. This means that other threads
780 can work with the device structure, in particular the reservations
781 system while despooling.
783 kes Fix return in reservation message queue that missed clearing
784 the jcr lock (implemented 26Jun07 below).
785 kes Rename a number of dev methods to make locking function names
787 kes Document locking in lock.c. Move lock structures to new file
790 kes Move reservations message lock to lock jcr only this
792 kes Move main SD locking code into lock.c (new file).
793 kes Update Win32 build to include lock.c
797 kes Dirk committed the qwt library code for drawing graphs in bat.
798 kes Tweak install of qwt so that it is integrated with ./configure.
800 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
801 out by Eric (my typo).
802 ebl Fix configure.in to get batch mode enable
803 kes Return correct string from authenticate.cpp in bat when connecting
805 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
806 spurious line drops when using TLS.
807 kes Do not file reparse points when restoring a file that already
810 kes Implement Windows reparse points -- similar to directories, but
811 we do not descend into it. This is a first cut. They seem to
812 be backed up, but restore is not yet tested.
813 kes Remove restore_blocking in tls code when shutting a socket to leave
814 it in blocking mode. Hopefully this will fix the encryption bug
815 reported by Frank Sweetser.
816 kes When opening a file for backup, tell the OS that we are going to
817 read it sequentially -- optimization.
818 kes Change variable names in authenticate_director() to not conflict
819 with member names in bat. Caused great confusion with compiler,
822 kes Queue openssl error messages in case of comm problem.
823 kes Do shutdown() call if socket terminated.
824 kes Remove some duplicated code in tls.c
825 kes Move more of the bsock member variables into private and access
827 kes Add Frank Sweetser's tls-test to the regression suite.
829 kes Add Swedish sv.po file
831 kes Don't print clock skew message in FD if less than 3 seconds diff.
832 kes Add a bit of VSS info to status client.
833 kes Implement a first cut of Vista VSS, using Win2003 code.
837 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
838 loaded tape but uses first drive).
839 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
840 This was indeed a Win32 issue.
842 kes Simplify search of autochanger for in-use Volume.
843 kes Fix exit condition of check for in-use volume. kes Remove
844 inappropriate my_postgresql_free_result() in db_close()
846 kes Fix bad return in FD when encryption signature not found.
847 Probably caused a crash.
848 kes Inhibit missing encryption signature error messages for
849 file types where no signature computed.
850 kes Correct inverted check on autochanger in reservation system.
851 kes Tweak debug code in autochanger reservation.
853 kes Add some additional locking in the cats directory in subroutines
854 that modify packet variables called from batch insert.
855 kes Rework how dcrs are allocated. new_dcr() can now be called
856 with an existing pointer, and it will simply clean it up.
857 This allows the reservation system to test various different
858 devices, and will permit easy device changes.
859 kes A bunch of changes all over to handle new new_dcr() calling
861 kes Work more on the Volume management in the SD. Remember Volumes
862 for tape drives and for autochangers (even virtual disk changers).
863 kes When looking at the Volume list to reserve a drive, handle
864 autochanger names correctly by interating through the changer
865 devices. Also call the Director to see if a Volume is suitable
867 kes Fix some bugs in bscan. Make sure all media records are written.
868 Make sure that valid JobMedia records are written for disk files.
869 Previously they were completely wrong.
870 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
871 that the URLs don't change and so that the developers will all
872 work off the same copy. Rebuild from scrach.
873 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
877 kes Fix seg fault in FD from incorrect digest size.
878 kes Fix argument to non-OpenSSL crypto.c subroutine.
882 kes Remove a few malloc()s from the encryption code.
883 kes Use the class calls to bsock in filed/backup.c and restore.c in
884 place of the old bnet_xxx code.
885 kes Implement code that does an on the fly calculation of the
886 signing digest during restore of encrypted files. It makes
887 a best guess at the algorithm, and if it is not correct, will
888 then revert to the old code which reads the file after it is
890 kes Implement at least one missing crypto stream in stream_to_ascii()
891 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
892 #877 where a reload with bad syntax causes Dir to exit.
894 Cut: 2.1.14 beta (not released)
896 kes Do not free a volume on a tape drive until another volume is
897 mounted and read, or the autochanger unloads the volume.
898 This should help the SD re-use volumes that are already mounted,
899 and should fix bug #886.
900 kes Apply patch from user brettedgar that allows gnome2-console include
901 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
902 kes Apply patch from Lucien Weller that fixes day of week calculation
903 because of DST flag problem. Fixes bug #887.
905 kes Move find_next_appendable_volume() to after acquiring a valid device
906 in reserve.c. This fixes bug #864 -- confirmed by reporter.
908 kes Unable to reproduce bug 872. However added additional testing for
910 kes Bug #874 resolved by documenting SQLite limitations.
911 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
912 kes Bug #881 resolved by removing typo in mtx-changer script.
913 kes Made Frank Sweetser's wiki the official Bacula wiki with his
914 approval. Added a link to the wiki on the web page, and implemented
915 a backup from http://paramount.ind.wpi.edu
917 kes Fix update allfrompool to pass pool name.
919 kes Convert to pure GPL v2 license.
920 kes Fix sscanf problems reported by Peter Buschman that caused
921 a bus error on Solaris.
922 kes Rework (simplify) the select prompt in bat.
923 kes Move get_jobid_from_tid() into lib and create a
925 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
926 should definitely fix the problem of lost error messages in the
928 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
929 kes Eliminate tcpd.h from the project. Enclose the #include from the
930 library with extern C ...
931 kes Add print of signal name when a signal is trapped.
935 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
937 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
938 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
939 makes SQLit3 run 30 times faster, though a bit less safe.
940 kes Implement --with-batch-insert in configure and detection of thread
941 safe libraries. It is on by default, but turned off if no thread
942 safe library (e.g. SQLite 2) is available.
944 kes Fix Bacula PostgreSQL buffer overruns.
945 kes Do better checking for NULL results returned from PostgreSQL;
946 implement retry for failed queries; clear results buffer after
947 failed query. Hopefully this will correct the PostgreSQL failures.
949 kes Implement algorithm to handle only one appendable volume with
950 Prefer Mounted Volumes = no.
951 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
952 returned from a query.
953 kes Make volume lock recursive.
954 kes Implement an additional volume reservation algorithm that
955 starts by considering all reserved volumes then uses the
956 old brute force algorithm of searching the resources to
957 find a suitable device.
958 kes Add new reservations debug code and refine the old code.
959 kes Update the win32/dll/bacula.defs file.
961 kes Tweak reservations algorithm to permit a few more cases, i.e.
962 volume reserved, but on different drive, ...
963 kes Enhance SD status to include Pool and Media Type for drive in a
964 more readable format (a bit longer).
965 kes Fix PostgreSQL double free.
967 kes Minor refactoring of restore decryption code.
968 kes Add code to smartall.c to detect double free of a buffer.
970 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
971 so that bsmtp will create a correct email address (mailbox only).
972 kes Modify 'memory' command so that the buffers are listed as 'In use'
973 to avoid confusion with Orphaned buffers.
974 kes I reworked the OpenSSL include/lib flags to be handled in
975 the standard Bacula way, which should fix bug #863 concerning
976 non-standard OpenSSL libraries.
978 kes Implement Help Browser window for bat.
979 kes Fix reload bug that reset StorageId to zero.
981 kes Fix TLS #ifdefing when TLS turned off.
982 kes Ensure that when labelling a tape with Slot=0 that InChanger
984 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
986 kes Add StartTime to final uar_sel_jobid_temp query so that we can
987 add DISTINCT (required by PostgreSQL).
988 kes Implement BSOCK authenticate_director() method. Eventually will
989 authenicate all daemons.
990 kes Move several more functions into the BSOCK class.
992 kes Add code to tell the OS that we no longer need a cached
993 file that we were reading. In findlib/bfile.c. Also,
994 only cache files that we are reading. Thanks to
995 Tobias Oetiker <tobi@oetiker.ch> for the idea.
996 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
997 kes Implement script to automatically generate cats and dll .def
999 kes Update README.mingw32 to include new .def file generation.
1000 kes Correct typo in UTF-8 error message as reported by:
1001 jhernandez <julianhernandez@gmail.com>
1002 kes Add additional sm_check() code on debug level 1.
1003 kes Set default debug level to 1.
1004 kes Trap SIGABRT in attempt to get traceback.
1006 kes Reduce bat connect timeout from 30 to 15 seconds.
1007 kes More restructuring and implementing BSOCK class in place of
1009 kes Remove a few unnecessary malloc() tests in crypto code.
1010 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1011 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1012 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1014 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1016 kes Fix Verify InitCatalog. The attributes were not pointing to the
1017 correct saved location.
1018 kes Implement message callback so that GUI is sure to get all
1019 daemon messages. Currently displayed in a dialog in bat.
1020 kes Ignore SIGUSR2 (Bacula timer) in bat.
1021 kes Apply regress patch from bug #859 to allow regress to work
1022 with Solaris compiler.
1024 kes Begin adding TLS support to bat.
1025 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1026 clean up lex.c and make it more readable.
1028 kes Move more bnet functions into the BSOCK class.
1029 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1030 kes Complete change of berrno strerror() method to bstrerror()
1032 Release: 2.1.10 beta
1034 kes Cleanup incorrect email addresses in bsmtp.
1035 kes Make bat display initial messages rather than discard them.
1037 kes First cut of adding .mod to the run command.
1038 kes Implement auto display of messages in bat.
1039 kes Enhanced preferences to allow all Bacula output to be
1042 kes Try to make bsmtp date routines more generic.
1043 kes Fixed bug #856 autochanger documentation.
1044 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1045 kes Add new cats entry point so Win32 builds.
1047 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1049 kes Do better checking for the MySQL 64 bit libraries looking for both
1050 .a and .so libraries.
1051 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1052 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1053 kes Require the thread safe version of MySQL during configure. Thanks
1054 to Andre Noll for pointing this out.
1055 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1056 continuing in migration code.
1057 kes Apply implementation of tray-monitor font derived from gnome-console
1058 submitted by Andreas Piesk <a.piesk@gmx.net>
1060 kes Eliminate important memory loss in SQLite
1061 kes Fixed the batch insert MySQL thread specific data that was not
1062 being freed. See cats/mysql.c:db_thread_cleanup().
1063 kes Fix restore before command.
1064 kes Convert old hdr.name to name() in a few places.
1065 kes Implement update jobid command.
1066 kes Return all time_t dates in db_get_job_record()
1067 kes Stop watchdog in SD earlier.
1068 kes Put Pool just after Storage in please mount message.
1069 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1072 kes Update the po files.
1073 kes Fix Verify InitCatalog by making it cache attributes.
1075 kes Change name bacula-bat to bat for man 1 page to correspond to
1077 kes Check for client and store NULL pointers in status command. This
1079 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1080 kes Fix sign extended editing of %p.
1081 kes Clean out a little old #ifdefing in cats/mysql.c
1083 kes If time diff between DIR and FD is more than 600 seconds convert
1084 INFO message to WARNING.
1085 kes Implement heap size display in status for all daemons.
1086 kes Attempt to fix MySQL db open memory loss (not successfull).
1087 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1088 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1089 Query. This looks like a MySQL but but by doing extra releases,
1090 the memory goes away. This should fix bug #847.
1092 kes When backup fails, cancel SD before waiting for sd termination.
1093 kes If SD is waiting for FD to connect during cancel, wake up the
1095 kes Fix fsf code so that errno is correctly reported.
1096 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1098 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1099 so that Bacula doesn't later stumble into a seg fault.
1100 kes Use the term Restore Client in the restore Job report.
1101 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1102 the original job's FileSetId.
1103 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1104 spooling in migration jobs. Not yet tested.
1105 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1106 reading conf file from a pipe. However, do it with open_bpipe()
1107 rather than popen. Not yet tested.
1109 kes Fix an ugly bug where the VolCatBytes were getting updated
1111 kes Implement bconsole memory command that prints current memory
1112 usage, plus smartalloc dump.
1113 kes Clarify some error messages in backup, admin, and migrate.
1114 kes Shrink label dialog to smaller size.
1115 kes Invert Cancel OK buttons on restore to be OK Cancel.
1116 kes More strerror() to bstrerror() conversions.
1118 kes Start implementing bstrerror() in place of strerror().
1119 kes Stripping path -- seems to work.
1121 kes Prevent door and port files from being restored (mostly
1123 kes Free an unreleased buffer in compat code.
1124 kes Change console Job name from *Console* to -Console- to eliminate
1125 Win32 filename problems. Put Win32 path separator when creating
1126 Console file. This fixes bug #846.
1127 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1129 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1131 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1132 to force Win32 error message.
1134 kes First cut strip path. The data should be passed to the FD,
1135 but nothing is done with it yet.
1136 kes Enhance the digest and signature routines in the crypto
1137 library to accept a JCR and to use it to print error messages
1138 so that they will go in the Job report rather than the daemon's
1140 kes Simplify some of the verify signature code.
1141 kes Simplify a few of the alternative returns in the signature
1144 ebl Use only POSIX regex instead of GNU regex in breg.c for
1145 File relocation. It fix broken freebsd compilation.
1146 kes Convert all other Dir files to use new ua class message
1148 kes Tentative fix for missing digest signature in bug 807.
1149 kes Correct handle problem in new win32_ftruncate routine.
1150 kes Convert ua_purge.c and ua_update.c to use new ua class
1151 message routines for bat.
1153 kes Correct incorrect installation of LICENSE in Win32 installer.
1154 kes Display LICENSE at the beginning of the Win32 install.
1155 kes Attempt to correct the need for the png files to be installed
1157 kes Reapply my bat.conf install script in qt-console. I think I
1158 editted bat.pro instead of bat.pro.in and it was lost.
1159 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1160 the /var/lock/subsys for subsysdir. Also corrects typos in the
1163 kes First cut update job.
1164 kes Correct configure to include qmake of src/qt-console directory.
1166 kes Make restore job yes/mod/no print in one command so GUI works.
1167 kes First cut implementing backup and restore client.
1168 kes Correct editing in Verify output that caused a seg fault.
1170 kes Insure that bat.conf is not overwritten during installation.
1171 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1172 while I was implementing migration in March 2006 !
1174 ebl Cleanup file relocation, using char *RegexWhere instead of
1175 char *where + bool where_use_regexp
1176 kes Update some manpages and add bat manpage.
1177 kes Make a first cut at converting bacula.spec.in for bwx-console
1179 kes Apply patch from John Goerzen to add hostname as fourth argument
1180 to make_catalog_backup script.
1181 kes Fix typos I introduced into bsmtp.c
1182 kes Make pm_strxxx() routines handle input of NULL pointer. This
1183 is to protect from NULL pointers returned from SQL databases.
1184 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1185 kes Add more debug to FIFO code -- fix fifo regression test.
1187 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1188 kes Add thread timer to bnet_connect() to break from OS if wait time
1191 kes Update Win32 build to include new files, new symbols, and
1193 kes Implement socket level heartbeat (tcp_keepidle)
1194 ebl Commit File relocation patch
1195 kes Make bat have 'make install' target.
1196 kes Warn during install if old gnome-console binary found.
1197 kes Warn during install if old wx-console binary found.
1198 kes Add -8 option to bsmtp command line to add content type utf-8.
1199 Fixes bug #809. (Character coding problem in bsmtp).
1200 kes If < is found in target (from, to, cc) then do not enclose the
1201 target in < > in bsmtp. Fixes bug #772 (malformed address).
1202 kes When printing certain items in dbcheck, stop after 300000.
1203 Fixes bug #822. (dbcheck loops).
1204 kes Incorrect status in Dir after waiting for mount with poll set.
1207 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1209 kes Print waiting to reserve a device every 5 mins.
1211 kes Don't call close_part in label.c if tape and relabel.
1212 kes Don't free volume if busy in close() -- should help with
1214 ebl Fix #824 RunScript bug (After script could be execute twice)
1215 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1216 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1217 Add a regression script to test RunScript
1219 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1222 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1223 deprecated. No additional bugs will be fixed, and they will be dropped
1224 in a future release (probably 2.4.0).
1225 kes Change name of wx-console to bwx-console to make it more Bacula
1227 kes Change the name of gnome-console to bgnome-console to make it
1230 kes Some time in March, a Feature Request with patch from Jorj Bauer
1231 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1233 The ability for the director to validate a Client (FD) CN against
1234 an arbitrary set of patterns rather than the hostname, with
1235 A new 'TLS Allowed CN' set of directives which are implemented
1236 in the Client resource. Then pattern matching is used in place
1237 of hostname matching against the Certificate's CN. As an example, we
1238 have certificates which (a) use a local CA, and (b) have a CN of the
1240 kes Add new/changed entry points to Win32 build
1241 kes Create unaccepted-projects for projects that are not accepted.
1242 kes Simplify locking in the reservations system.
1243 kes Add more debug code in reservations.
1244 kes Make sure error condition on reserving a volume is handled correctly.
1245 kes Correct handling of volume_in_use.
1246 kes Correct handling of initializing a device.
1247 kes Move handling of broadcasting releasing a device into release_device().
1248 kes Correct attaching dcr to dev so that it is only done if device
1249 is properly initiated.
1251 kes Locking debug level tweaks in SD.
1252 kes Tweak new Volume code.
1254 kes Add exec external-command [wait-seconds] to bconsole. This
1255 executes the external-command. Note! normally external-command
1256 should be enclosed in double quotes.
1257 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1258 it should normally be off in a production system.
1260 kes Implement die command for SD so that we can force it to dump.
1261 kes Implement SD lock debug code.
1262 kes Implement new algorithm for keeping Volume list in SD. It
1263 is now owned by the device.
1265 kes Implement new code for freeing in use volumes that should
1266 resolve if not all, some of the problems of multiple drive
1267 tape conflicts described in bug 801.
1269 kes Fix gui/bacula-web/images files in svn.
1270 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1272 ebl Fix a bug in batch mode (in string escape)
1273 kes Correct migration prune SQL typo that crept in in a
1274 recent 2.1.x change.
1276 kes Move bnet_despool() into class in bsock.c
1277 kes Modify job report to include director name and Build OS.
1278 kes Move drop root privilege and check_catalog() before fork.
1279 kes Add update database scripts (version 9 to 10) to updatedb directory.
1281 ebl Check size and age of each file after its backup to see if
1282 it has changed during backup, if 'checkfilechanges' is set.
1283 The FD will do an extra check (stat(2)) after
1284 each file backup. mtime, ctime and size are compared with
1285 'before backup' information. If time or size mismatch, an
1286 error message will be generated. You must upgrade FD to use it.
1288 kes Make database name and user configurable
1289 --with-db-name=xxx --with-db-user=xxx
1290 kes Add back database type to message.c for debugging.
1292 kes Implement dir_sql() which issues an SQL query.
1293 kes Modify bat medialist to use dir_sql() and do some minor C++
1294 formatting as well as eliminating a number of pointers, simplifing
1297 kes Fix some of the mtx-changer grep commands for tape label readers.
1298 kes Convert a number of bsendmsg into the appropriate send/warning/error
1299 message class calls.
1300 kes Suppress the using database message in the .sql command.
1301 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1303 kes Add context menu for floating a window.
1304 kes Some minor cleanup and name changes in qt-console
1305 kes Add doing mt setblk 0 in Win32 mtx-changer.
1306 kes Apply Martin's bug fix to move definition of ENODATA for
1308 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1309 sqlite2 and sqlite3.
1311 kes More pruning cleanup.
1312 kes Turn on wait_for_drive by default in mtx-changer.
1313 kes Turn on Batch insert code by default as it now passes regression.
1314 kes Add ./configure --enable-bat to enable building of Bat.
1315 No install yet though.
1317 kes Implement a new .sql command for bat.
1318 kes Implement code to turn off pruning in obtaining the next volume.
1319 Pruning is turned off for the status dir command, but turned on
1320 for SD requests and for the list nextvolume command.
1322 kes Correct Qmsg() that was not updated correctly when committing a
1323 previous change (probably the recent TLS patch).
1325 kes Write new subroutine is_volume_purged() that explicitly checks
1326 if the Volume is purged, and if so marks it as such. This should
1327 resolve problems reported about needing to mount twice to recycle
1329 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1330 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1331 amount of duplicated code.
1332 kes Do volume pruning only for the Media Type desired (reduces pruning time
1333 if multiple Media Types are in the same pool).
1334 kes Implement more detailed info in the Job report for the Bacula version
1336 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1338 ebl Add bbatch tool to bench database and insert mode.
1339 Fix sql quote stuff in batch mode
1340 Fix sql stuff for mysql
1342 kes Correct problems with am/pm scheduling. Fixes bug #808.
1343 kes Implement new prunning code that prunes up to 1000 jobs at
1344 the same time. The same technique can be applied to a number
1345 of other prune/purge subroutines.
1346 kes Add an insanity check when starting a new tape job to ensure
1347 that the tape position has not been changed. If so fail the
1349 kes Fix Win32 build for dlls to add the folllowing:
1350 src/lib/bsock.c -- new file with new entry points
1351 src/lib/dlist.c -- new entry points
1352 src/cats/sql_create.c -- new entry point
1353 src/cats/sql_cmds.c -- new DATA item exported
1355 ebl batch mode cleanup bscan-test is ok now.
1356 kes Implement SD code to check length of disk volume before appending.
1358 kes Correct return status on db_batch... routines.
1359 kes Add call to db_write_batch_file_records() to migration code.
1360 ebl Fix AfterJob timing
1361 kes Move the checking of the database in initializion of the Director
1362 to after we drop privileges. This avoids the need for both root
1363 and bacula access to the DB.
1364 kes Correct a misplaced variable definition in src/filed/backup.c
1365 kes Correct how the new batch insert db_create_attributes_record()
1366 uses the arguments. Caused a seg fault in bscan.
1367 kes Implement lock() and unlock() methods in DEVICE class.
1368 Implement block() and set_block(xx) methods in DEVICE class.
1369 kes Modify bnet_connect() so that it uses time() to check for the
1370 wait time expiring (on some OSes, some system calls may not
1371 return immediately).
1372 kes Modify Verify to obtain the previous JobId when it is actually
1373 running rather than at schedule time (as it was in 1.38.x).
1374 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1376 kes When checking pid in pid file, continue running if the pid is
1377 the same as ours. This occurs on IRIX after a system crash.
1380 kes Extend new GUI API.
1381 kes Make the ua structure a class, and implement send_msg(),
1382 error_msg(), warning_msg(), and info_msg().
1384 kes Apply fix from for building wx-console on the Mac from
1386 kes Implement new select mechanism for GUI programs.
1387 kes Reorganize initialization of stackedWidgets in bat.
1389 kes Add updated nagios plugin supplied by Christian Masopust.
1391 kes More bat implementation.
1392 kes File migrate bug with Pool Occupancy using mediaid instead
1393 of jobids. Fixes bug #795.
1394 kes Fix orphaned buffers in filed backup and verify due to
1395 crypto buffers not freed during errors. Fixes bug #789.
1396 kes Extend new GUI api code to tree commands.
1397 kes Ensure that tree and dot commands check console ACLs.
1398 kes Permit marking directory with trailing slash.
1399 kes Allow 20 console connections (instead of only 10).
1401 kes Add smartctl call to bacula-sd.conf as an example of getting
1404 kes Modify jobq.c to let simultaneous restore jobs run. This may
1405 cause them to fail if they cannot get a drive.
1406 kes Add Client Connect Wait to Storage daemon to permit users to
1407 modify the time the SD waits for a FD connection.
1409 kes Correct virtual changer check which was backwards. This caused
1410 volumes to be unloaded into slots already occupied.
1412 kes Apply Command ACL filter to JobId list in restore command.
1413 kes Correct typeo in var.c patch.
1415 kes Don't let Bacula prune File or Job records for the current Job.
1416 kes Fix variable substitution pad + inc bug reported (with patch)
1419 kes Correct SQLite log table index as reported by Luca Berra.
1421 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1423 kes Begin implementing new comm signals for API.
1424 kes Fix a few places in lib/message.c where the open fd may
1426 kes Continue implementing lib/bsock.c (real class). Make jcr,
1427 who, host, and port private. There are new methods to access
1428 them for non-class use. This required touching a number of files.
1430 kes Add LANG=C to autoconf/randpass so it works with languages other
1431 than English. Fixes bug #788.
1433 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1435 You will not be able to generate Include/Exclude list any more.
1436 It will be fixed soon.
1437 If you want to use this, you can apply
1438 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1440 kes Restore of sockets created false error messages because Bacula
1441 no longer restores sockets, but the code was still trying to
1442 set the attributes on a non-existent file. Reported by a user.
1443 ebl finish RecyclePool feature
1444 Media will takes Pool.RecyclePool
1445 when moving from Scratch to a Pool or when user will do
1446 update volume=xxx frompool
1447 To use it, add RecyclePool = aPool to your Pool resource
1450 RecyclePool = Scratch
1454 kes Expand new BSOCK class adding signal() and new BNET signals.
1455 kes Begin enhancing the dot commands adding a new API function
1456 that returns more information and will make it easier
1457 to interface to the Director from a program.
1459 kes Make DEVICE fd private. Its new name is m_fd, and can be
1460 obtained with dev->fd() outside the class. This is the
1461 first of many DEVICE members to be made private.
1462 kes Implement Michael Renner's idea on having a virtual disk
1463 changer. I made some minor modifications (e.g. I did not
1464 implement the Virtual Changer directive, but simply set
1465 the Changer Command to an empty string.
1467 kes Implement a BSOCK send() method that writes the whole record
1468 in a single write() request rather than in two.
1469 ebl add update volume=xxx recyclepool=yyyy
1470 volume takes recyclepool from pool when using update volume=xxx from pool
1472 kes Fix encryption deblocking bug, which caused some restored files
1473 to be truncated. This fixes bug #763.
1474 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1475 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1477 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1478 ebl Use btime_t instead of uint64_t in media patch.
1480 kes Optimize the use of the database a bit in the Status dir command.
1481 Only open it when needed, ensure that if any previous database
1482 was opened, it is closed.
1484 kes Correct VolCatBytes bug from media patch.
1485 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1486 in the case of orphaned records.
1487 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1488 and File records in 300K chunks to be more efficient. This
1489 idea came from Juan Luis Frances (if I remember right).
1490 kes Apply Eric's scratch patch that moves a purged Volume to
1491 the RecyclePool. Question: how is RecyclePool set? what
1492 happens to the ScratchPool?
1493 kes Apply Eric's media patch that collects read/write media
1494 times as well as byte counts. This patch requires a
1495 simultaneous upgrade of the DIR and SD. Note, there
1496 should be some way to turn off timing. I'm not sure
1497 times are in Bacula units.
1498 kes Apply Eric's batch-insert patch.
1500 kes Update projects list.
1502 kes Implement Include/Exclude file lists in FD as dlists using
1503 the new dlistString class. This permits efficiently having
1504 large include/exclude lists and completes project Item 25.
1505 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1506 console is authorized to cancel the job. This fixes bug
1508 kes Modify SD so that the VolCatJobs medium record is updated
1509 at the beginning of a Job rather than the end. This
1510 fixes bug #775 where exceeding MaxVolJobs caused jobs
1512 kes Added a mutex around getting and setting Volume information
1513 so that multiple simultaneous jobs will single thread.
1515 Switch to using Subversion
1516 kes Remove src/pygtk-console/ from configure
1518 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1519 plus the entrypoints.
1520 kes Apply patch supplied that corrects debug print
1521 in canceling jobs for max run time. Supplied as
1522 part of bug #621, which was previously fixed.
1524 kes Test on job_canceled() and sd_msg_thread_done inside
1525 loop starting the message thread to avoid a race condition.
1527 kes Remove rl_catch_signal from console.c as it conflicted
1528 with the header definition. Fixes bug #765.
1529 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1531 kes Clarify some stored/acquire messages to indicate if the
1532 problem is with read or append.
1534 kes Fix memory leak with storage ids in cats/sql_get.c
1535 kes Terminate watchdog earlier to avoid reference to released
1536 memory -- reported by Jason Austin.
1537 kes Move closing the database from jobq.c to the director daemon
1538 termination routine. This fixes memory leaks for shadow jobs
1539 (i.e. migration jobs).
1540 kes Free up the unique jobid chain items in migrate.c. This fixes
1541 a memory leak problem.
1542 kes Convert some ugly looking for statements to use foreach_alist
1543 in findlib/find.c. This will facilitate converting the structures
1544 to use dlist (for large include/exclude lists).
1545 kes Fix a bug in the btree.c and btree.h routines, then rename them
1546 rblist and add them to be built in src/lib. Include some new
1547 methods written by Rudolf Cejka that make the code more readable
1548 (hides some of the ugly casting).
1549 kes Add set_next() and set_prev() methods which make the code much more
1550 readable. Also add a new dlistString class that facilitates storing
1551 strings in dlists. To be used in the large include/exclude lists.
1552 kes Make some trivial modifications to lib/tree.h that use rblist
1553 rather than dlist for storing the tree links. This was suggested
1554 by Rudolf Cejka. The result of this is that the restore tree now
1555 uses red-black binary trees rather than simple linked lists. This
1556 should give rather dramatic speed improvements for directories
1557 contining large numbers of directories/files (more than 10000).
1559 kes Fix maxruntime bug #621.
1561 ebl Implement the include JobID in spool file name project.
1562 kes Reorder projects file in order determined by Jan 2007 vote.
1563 kes Implement item #12 on project list -- quick release of FD by
1565 kes Fix open of SQLite3 db where user does not have write permission
1566 so that DIR does not crash. Fixes bug #761.
1568 kes Add back missing @ in Win32 Makefile.
1569 kes Change 'Device not configured to autolabel' from INFO
1571 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1572 which should restart an indefinite # of times.
1573 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1574 other DIR specifications.
1576 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1577 Fix path quoting in SQLite scripts.
1578 Fix problems with SHGetFolderPath.
1580 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1582 kes Fix Job restart on error bug that promotes an Inc to a Full
1583 backup. This should fix bug #755.
1584 kes Add qt-console and first cut of code.
1588 kes Fix Bacula->Documentation link on Win32 to point to index.html
1589 instead of bacula.html. Fixed bug #750.
1590 kes Return JobId in db_get_job_record() when JobId==0. This should
1592 kes Do not release source pointers when restarting a failed job.
1594 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1595 This *should* fix bug #747.
1596 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1599 kes Modify USTORE constructor to set an empty store_source string,
1600 and don't copy the store_source string in a cancel. Hopefully
1601 this will fix Arno's seg fault, bug #744.
1602 kes Add back code to disable conio in configure. Fixes bug #743.
1603 kes Correct the Options scanner in the FD to correctly handle
1604 SHA1 option, which was eating the next option. Reported by
1606 kes Add code to indicate when the SD is spooling, spool wait, and
1607 despooling as requested by Alan Brown.
1609 Version 2.0.0 released: 4 January 2007