1 Technical notes on version 2.4
5 kes Remove const char that causes problems with Python, which has
6 older 'incorrect' headers.
7 kes Add const char in dbd.c to avoid compiler warnings.
9 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
10 mt. This fixes bug #1116.
11 kes Fix failure of 2drive-concurrent-test. Always read label;
12 clear_unload() only after drive is defined in acquire_for_read().
14 Release Beta version 2.4.1-b1
16 kes Back out bad src/lib/base64.c change.
18 kes Generally clean up the manual tape loading code. The main
19 conceptial change is that when a volume is marked to be unloaded,
20 its volume name is retained, and it is only marked as unloaded
21 when either the autoloader says it is unloaded or another tape
22 is read on that drive.
24 kes Fix a recycling problem with two autochangers reported in bug
25 #1106. This may also (unlikely) fix a second recycling bug as
27 kes Fix a SD lock volumes deadlock problem reported in bug #1100.
29 kes Fix format problem in bscan output reported in bug #1105.
31 kes Copy more data when restarting a job so that run
32 overrides are kept. This should fix bug #1094.
33 kes Backport updates to jobq.c where possible.
35 kes Fix bug where SD did not ask operator if the device could not
36 be opened. Reported by Eric.
38 kes Add dbuser to DIR conf file (replaces user).
39 kes Add --with-db-password to ./configure
40 kes Fix regress to handle db_password.
41 kes Fix a couple of pedantic compiler warnings.
42 ebl Fix bug when starting a restore on a storage that doesn't
43 have the requested MediaType.
45 kes More work on word alignments -- eliminate all ints from
46 the configuration routines.
48 kes Fix bug reported by Scott Barninger where the bacula script
49 refers to scripts in the wrong directory. Needed to meet the
50 requirements of recent FHS location changes.
51 kes Fix word alignment problem on non-Intel 64 bit machines
52 such as Solaris. This should fix bug #1097 -- bus error in SD.
54 kes Add missing win32/patches/wxWidgets.patch to 2.4 repository.
58 kes Update version to reflect the magnitude of the SD changes.
60 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
63 kes Add create_postgresql_database.sql to Win32 installer. Should
64 fix problem reported by Juilio Monteiro.
65 kes Get correct slot when auto unloading a device. This fixes bug
68 kes Fix multiple media restore.
69 kes Make DEVICE Slot private and access it via a method.
70 Allows better control over when it is set and cleared.
71 kes Fix possible seg fault if SQL error.
73 kes Add debug code to SD.
74 kes Fix renaming a Volume, which used the wrong Volume name.
76 kes If operator has rewind tape, print warning, release tape and
77 try once more. If tape is positioned somewhere, something went
78 wrong, so mark the tape in error and try once more. Previously
79 this error was fatal, now it produces an error message.
80 kes Ensure correct volume name displayed during restore
81 kes Ensure that Volume is mounted for restore.
83 kes Fix a few more Coverity reported problems.
85 Beta Release Version 2.2.10-b4
87 kes Enhance a couple of SD debug messages.
88 kes Tweak unload flag setting and ensure it is set during swap.
90 ebl Fix #1091 about bad output in estimate command.
92 kes Modify autochanger locking to attempt to avoid race
94 kes Make sure device not busy before doing label command.
95 kes Display open() errors except when polling. Previously too
96 many were suppressed. This should fix bug #1070.
97 kes Fix Win32 reparse points. Bacula will not recurse into any
98 reparse point directory, including mount points, unless the
99 directory is explicitly mentioned at the top level (same as
100 with Unix). A file that is linked to another file will be
101 backed up -- much as Unix does for hardlinked files.
102 This fixes bug #1041.
104 kes Remove double quotes from ChangeLog and ReleaseNotes
105 kes Remove StorageId test when pruning and recycling (Eric's changes).
106 kes Remove old form of locking when getting volumes -- causes deadlock.
108 kes Fix buffer overruns detected by Coverity.
110 Beta Release Version 2.2.10-b3
112 kes Tweak joblog display.
114 kes Implement --without-qwt
115 kes Fix layout of restore tree dialog
116 kes Add configure bat QWT libraries, so that bat can be built
117 with or without the QWT libaries.
119 kes Apply batfix bat cleanup patch from Riccardo.
120 kes Make sure we unload the right slot when swapping.
122 kes Improve SD reserve debug code.
123 kes Testing an improvement to free up volumes no longer in use.
125 Beta Release Version 2.2.10-b2
128 kes Rework SD acquire for read to handle autochanger Volume
130 kes Implement regression that explicitly tests swapping a Volume
131 from one drive to another.
132 kes Enhance disk-changer to detect most error conditions.
133 kes Fix SD code so that it properly swaps a Volume between drives.
134 This fixes bug #1083.
136 kes Prevent a Volume that is being swapped from being freed from
137 the volume list. This will most likely fix, at least partially,
139 kes Fix strippath so that it does not get a buffer overrun and crash FD.
140 This fixes bug #1078.
141 kes Make inability to change owner/group when creating a dir only a
142 warning rather than an error.
144 ebl Fix SQL query in migration code
146 kes Force unload of volume when wrong volume mounted in SD.
148 kes Fix bat seg fault at termination.
149 kes Add Bacula generated version to bat about box.
151 Beta Release Version 2.2.10-b1
153 kes Permit multiple simultaneous restores -- experiment.
155 kes Backport development stream SD reservation system changes.
158 kes Move final volume swapping code to DCR method and
159 call it from acquire_for_read().
160 kes When wrong volume is mounted during read, unload_autochanger.
162 kes Stop searching for Volumes in SD askdir if DIR returns the
163 same volume name twice in a row.
165 kes Tweak the swap Volume from one drive to another code so that
166 it now seems to work.
167 kes Resolve several problems with recycling that broke the new
168 code (these problems are in 2.2.9 as well).
169 kes Remove the volume lock when calling the sysop code.
170 kes Don't mark a reserved volume with no writers as unused otherwise
173 kes Rework class structures for VOLRES, DCR, and DEVICE to make
174 the method names a bit more logical, and for more logically
175 handling the responsibilities.
177 kes Remove redundant code in terminating the scheduler that just
178 causes a seg fault in many cases.
179 kes Cleanup releasing a volume and make it a DCR method.
180 kes Improve algorithm for detecting pre-reserved volume and
183 kes Tweak volume swapping code so it works.
184 kes Correct name overloading in mount.c
185 kes Replace released flag in VOLRES with reserved and add access
186 methods for the VOLRES class.
187 kes Prevent volume from being released while being swapped.
188 kes Refactor parts of stored/mount.c
190 ebl Add sanity checks for VolWriteTime and VolReadTime
191 ebl Take care of bad clock changes while computing VolWriteTime
192 and VolReadTime. This should fix or limit #1066
193 kes Correct error string numbers in dird/catreq.c
194 kes Restructure reserving, acquiring, and mounting volumes. Calls to
195 autochanger are deferred for mount.c -- simplifes the code.
197 kes Do not prune any running job. It just fails the job.
198 kes Lock the volumes when changing dev->reserved_device and marking
199 the volume unused otherwise the device can get reserved by
200 another job before the volume is released, thus blocking it.
203 Beta Release Version 2.2.9-b7
205 kes Close bat console windows first to eliminate error message
207 kes Remove useless code in Scheduler that causes seg fault on
209 kes Correct some SD catalog request error messages.
210 kes Don't allow pruning of any running job.
211 kes Turn off code in read_record that causes a seg fault in the SD
212 when reading past an EOS_LABEL.
213 kes Turn off unloading the autochanger in reserve.c as it just
215 kes Lock volumes when unreserving a device.
216 kes Do not mark volume unused when recycling.
217 kes When acquiring, don't mark volume unused if it is reserved (busy).
219 Beta Release Version 2.2.9-b6
221 kes Eliminate ./configure warning on po directory
222 kes Fix bug #1063, reuse of freed ptr in list nextvol.
223 kes Release regex compile buffer in filed/job.c
224 kes Add proper type of const char in sql_create.c
225 kes Turn off debug in daemon termination routines
226 kes Move free_volume_list() before devices are freed in stored.c
227 kes Fix reference to uninitalized stack variables in bregex.c.
228 This should correct bug #1067.
230 kes Fix possible seg fault in SD when freeing a volume entry.
232 kes Apply patch from bug #1069 that corrects spurious error messages
233 when ACLs enabled on SGI but no ACL exists.
234 ebl Fix a storage deamon segfault at debug level 500.
236 Beta Release Version 2.2.9-b5 -- not released
238 Beta Release Version 2.2.9-b4
240 kes Re-enable code to remember last volume mounted on a non-tape
242 kes Add patch supplied in bug #1068 that fixes a SD crash when using
243 a Virtual autochanger.
244 kes Generate correct JobMedia records during spooling/despooling when
245 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
246 <tih@hamartun.priv.no> for excellent analysis and testing.
248 Beta release Version 2.2.9-b3
250 kes Rework certain SD locking based on gdb tracebacks of deadlocks
251 sent by Eric. This code now uses only the volume_lock() rather
252 than the reservations lock when at EOM and acquiring a new
254 kes Ensure only one exit point in several subroutines.
256 Beta release version 2.2.9-b2
258 kes Fix to initial tape drive open to release the volume name
260 Beta release Version 2.2.9-b1
262 kes Fix to JobMedia fix.
263 kes Fix bug pointed out by Peter Much that causes the StorageId to
264 be updated when reading a tape (during migration, it could have
265 been incorrectly set to the write StorageId).
267 kes Implement autostart scripts for Debian
269 kes Fix mtx-changer.in for broken Debian mt program.
271 kes Massive commit of all fixes and back ports to create 2.2.9
273 kes Apply doc fix from bug #1062.
274 kes Resolve crash and improper restore wx-console Win32 restore
275 GUI. Fixes bug #1065.
276 kes Update Win32 wxWidgets to latest version.
277 kes Attempt to do correct handling of Win32 mount points. Should
279 kes Fix Win32 FD backup/restore memory leak due to improper termination
280 of BackupRead/Write. This fixes bug# 1038.
281 kes Add const to AIX prototype for initgroups()
283 kes Undo bug #1047 heap overrun fix as it is not correct.
285 kes Fix creating first JobMedia record during Migration to include
286 proper index. This caused slow restores of migrated jobs.
288 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
289 and do not strip paths on symbolic links.
290 kes Set catalog backup database and user name from values specified on
291 the ./configure line.
292 ebl Apply patch to correct bug #1031, about wrong pool source information
295 Release Version 2.2.8
297 kes Apply patch from Martin to correct bug #1040, bscan sets existing
299 kes Fixed important spelling error in doc -- bug #1045.
301 kes Move initialization of read/write res lock earlier in the code.
302 This fixes the crash with a null conf file. This fixes bug
304 kes Redefine CURES in lib/parse_conf to be URES and move it all
305 into lib/parse_conf.c -- this responds to bug #1042, but does
306 not fix it. The fix is not to compile with FORTIFY_SOURCE.
307 kes Backport fix de-referencing a NULL pointer in the scanner from
308 the trunk SVN. I don't think this was reported as a bug.
310 Beta release Version 2.2.8
312 kes Re-enable the new job code editing (%f).
314 kes Fix bsnprintf for float point numbers. I broke recently when
315 parameterizing some variables. This fixes bug #1036.
317 kes Move Heartbeat documentation from Job to Director resource.
318 This fixes bug #1033.
320 kes Fix existing switch drive SD code to call autochanger to release
321 any old volume. This must be done to keep the autochanger from
322 releasing subsequently newly reserved volumes in doing a close().
323 This should possibly fix bugs #1032 and #1018.
324 kes Apply big backport of current SVN SD code that corrects a number
325 of race conditions. This is a first step in fixing bug #1018.
327 ebl Fixes bug #1028 where "Selection Type" option was not usable
331 Release Version 2.2.7
333 kes Partial back out (disabled) %f job code editing because it
334 does not build on Win32.
335 kes Fix seg fault Frank Sweetser reports in regression testing
336 on his systems. The problem was that the original author of
337 bsnprintf.c did not take into account the side effects of
338 using ++x in the argument to a #define.
340 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
341 that implements double quoting include names in conf files,
342 and also allows piping input by having the first character
343 be a vertical bar (|).
344 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
345 that implement %f in RunScripts to pass the FileSet name.
346 kes Skip leading | when lex input comes from a pipe as suggested
347 by Michael Stapelberg <michael@stapelberg.de>.
349 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
350 Nerijus Baliunas <nerijus@users.sourceforge.net>
352 kes This patch corrects a problem where the maximum concurrent storage
353 jobs counter gets out of sync during restore jobs causing jobs to
354 'wait on max Storage jobs'. This patch fixes bug #1009.
356 kes Add new include to postgresql.c suggested by Marc Cousins so
357 that it compiles correctly with pgre version 8.3. Also fix
358 misuse of %x with pointer (should be %p).
360 kes This patch fixes bcopy so that it produces correct Volumes.
362 kes This patch eliminates spurious output to the console during a VerifyVolume
363 job that contains encrypted data. It fixes bug #1024.
365 kes This patch prevents the 'status dir' command from trying to use a scratch
366 volume and possibly moving it from one pool to another. This patch fixes
369 kes Fix --archivedir addition to configure. Replace it with
370 --with-archivedir in configure.in This fixes the regression
372 kes This patch fixes bug #1012 where the job is canceled because
373 of Max Run Time exceeded when the job has not yet started.
375 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
376 one 'part' to write. Instead of each part being stored on disk,
377 written to DVD, then deleted from disk, all parts are written to disk,
378 and only the last is written and deleted from disk.
380 kes Correct typos in disk-changer.in
382 kes This patch fixes the status command to include the formating string for
383 JS_AttrInserting. It fixes bug #1021.
384 kes This patch should fix the Mac OS X build problem on the latest
385 Darwin, where sys/types.h was not included correctly (apparently
386 due to a change in the Mac headers). The solution was to explicitly
387 ensure that it is defined for the ./configure.
388 This patch also has a rebuild of configure that includes the Debian
389 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
390 kes This patch should ensure that queued messages to the console are
391 displayed as soon as possible. It should fix bug #1007, but has been
392 reported not to work.
394 kes This patch fixes the infinite loop when trying to increase the
395 maximum number of volumes in a Pool during the add command.
396 This patch fixes bug #1008.
398 Release Version 2.2.6
400 kes Get fix for joblist bug in bat from trunk.
402 kes This patch fixes bug #1003 where putting the message output from
403 a Verify job into the catalog results in a recursive loop. The problem
404 seems to show up only with postgresql (to be verified).
406 kes Fix bug #942 where lots of emails where generated when the heartbeat
407 interval was low and Bacula wanted a different tape from the one in
410 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
411 which was updated during a restore (or a reading migration) bug #982
413 ebl Use qmake-qt4 instead of qmake when available (debian system).
415 kes Add a security warning to src/cats/make_catalog_backup.in indicating
416 that passing the password via the command line (arg 3) is insecure.
417 This responds to bug #990 (it doesn't fix it).
418 kes Apply 2.2.5-postgresql-errors.patch
419 kes Remove unneeded File table index on JobId, which is already
420 present as the first index of another multi-index.
422 kes Set default debug_level to zero. This corrects bugs #991 and #993.
423 kes Fix a crash in bat when it cannot connect to the Director for example
424 if the Director is not running.
426 kes Activate Close button on tray-monitor window. This fixes
429 kes Fix spurious warning message printed when creating a volume with
430 a LabelFormat. This fixes bug #976.
432 Release Version 2.2.5
434 kes Add JobId in place of Job name in all the Jmsg() output.
435 kes Correct the APP_DESC for the Win32 storage service (remove an e).
437 kes Add new SD despooling attributes and Dir inserting attributes
438 job status codes. This fixes bug #961.
439 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
441 kes Fix doc issue. This fixes bug #963.
442 kes Fix listing performance problems in bat. Pointed out by
444 ebl Fix replace on restore. This fixes bug #969
445 kes Fix bat code that tests for Win32. This should fix bug #968
446 kes Query 5 list wrong Vol after migration. This fixes bug #960
448 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
449 in back porting from 2.3.x
451 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
452 The details are included in the notes in this file.
454 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
455 messages; it fixes a problem opening the SQLite3 database when multiple
456 simultaneous jobs were running; it fixes a bug with certain versions of
457 MySQL where batch inserts failed because of table name character case
458 (upper/lower) differences.
459 kes Fix race condition that drops final block written to volume.
460 This happens in rare cases with multiple simultaneous jobs
461 when the Volume fills. This fixes bug #964. May be related
462 to bug #935 and possibly #903.
464 kes Fix FD->SD authorization failure, which was due to spurious
465 wakeups from a pthread_cond_timedwait(). Simply check the
466 predicate before continuing. This fixes bug #953
467 dvl Add new configuration item --archivedir
468 dvl Adjust regression tests to use tmp not /tmp. This will allow
469 multiple concurrent runs of the regression tests.
471 kes Eliminate more strerror() and replace with bstrerror().
472 kes Remove BSD getopt and replace with unrestricted IBM version.
473 kes Fix Win32 build for changed calling sequences.
475 kes Fix FD->SD authorization failure, which was due to spurious
476 wakeups from a pthread_cond_timedwait(). Simply check the
477 predicate before continuing. This fixes bug #953.
478 kes Add const char where needed (more to do).
480 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
481 kes Don't overwrite error message in check_tables_version.
483 kes Unlock batch insert tables with same calls used elsewhere.
484 kes Allow starting 59 jobs a second.
485 kes Make SD session key more random.
486 kes Add retry for SQLite opening db if it fails. Probably helps
488 kes Suppress extra error messages during batch insert failure.
490 kes Put some FD auth code on dbglvl rather than fixed.
491 kes Return insert attributes error message in db msg buffer to avoid
492 false error messages. Helps fix bug #966.
493 kes Separate batch init error messages. Probably helps fix bug #966.
494 kes If Dir gets an error during inserting attributes, cancel SD.
495 This reduces unnecessary error messages.
497 ebl Cleanup batch insert code. Probably fixes bug #965.
499 kes Turn off some code when batch insert not enabled.
500 kes Edit FD name in connect error messages.
502 kes Add code to handle tray monitor separated from Win32 FD.
503 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
505 kes Fix ANSI tape labeling. This fixes bug #954.
506 kes Increase the max block size to 4MB fixes bug #957.
507 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
508 is not properly mounted (recognized) during a poll.
509 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
510 Job that has differences reports Verify OK.
511 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
513 Release Version 2.2.4
515 kes Increase size of name string when FD making connection to SD.
518 kes Add waits to multiple exit detection code to try to force pid
519 file to always be deleted.
520 kes Restore good dev.tar.gz to rescue set appropriate binary property.
522 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
523 trying to switch drives by checking for blocking before unblocking.
525 kes Cancel storage daemon in all cases where FD reports error. This
526 should fix virtually all cases of bug #920.
528 kes Fix error message that was clobbered when Dir tells SD it does not
529 have write permission on Volume. This should fix a minor point
530 in bug #942, but not the main problem.
531 kes Add code to cancel job in SD if FD connection fails. This should
533 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
534 kes Fix migration code to get correct Volume name with multiple volumes
535 by skipping |. Fixes bug #936.
536 kes Implement patch supplied by Landon to fix bug #944 where using
537 TLS with bconsole uses 99+% of the CPU.
538 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
540 kes Move patches into patches directory.
542 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
545 ebl Using 'm' in bconsole will show messages like before,
546 and not memory usage.
548 Release Version 2.2.3
549 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
552 kes Fix bug #935, and probably also bug #903 where files were not
553 restored. MediaId was not properly set in JobMedia record after
556 kes Add ./configure search in qwt-qt4 for qwt package
557 kes Apply Martin Simmons patch that should turn off the new API usage
558 when batch insert is turned off allowing building on older
561 Release Version 2.2.2
563 ebl Detect if new PosgreSQL batch insert API is present.
564 kes Correct incorrect mempool call causing Director crash.
565 sb Update spec files for 2.2.1 release
567 Release Version 2.2.1
569 kes Update POTFILES.in
570 kes Cleanup a few underquoted AC_DEFUNs in configure
571 kes Apply patch from Martin Simmons that adds a test for va_copy to
574 kes Fix bug #921 by increasing the number of tries to create a new volume
576 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
577 can be called multiple times. Implement a version for machines
578 without va_copy() that gets a big buffer.
580 kes Integrate more portable zone offset code into bsmtp.c
581 Submitted by Attila Fülöp.
583 kes Fix bad SD->FD return status reported by
584 (James Harper) <james.harper@bendigoit.com.au>
585 ebl Fix a bug in read_close_session which return random status
586 thanks to James Harper
588 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
589 and directory names during restore of single file/directories.
590 kes Add sanity checks to .sql command when string is empty. Hopefully
591 that will resolve Dirks Director crash.
593 kes Apply patch submitted by Martin Simmons that corrects a seg fault
594 in the bsmtp chat subroutine when debug is >= 10.
596 kes Fix Director crash when running bat SQL queries.
597 kes Add David's notes on Item 8: Copy pools.
599 kes Rework projects file to be current and ready for a vote.
600 kes Enhance lex scanner error message.
602 kes Tweak LICENSE file to mention BSD code.
603 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
604 if specified on the ./configure.
605 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
606 This class is intended to allow us to open a second bsock to the
607 Director while in the restore subdialog.
609 kes Fix configure to create bat Makefile before creating dependencies.
610 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
611 kes Add a tooltip to the tray monitor.
612 dvl Set the Director's PID file before dropping privs. This fixes
615 kes Update AUTHORs file
616 kes Increase the default max concurrent jobs to 20 in FD and SD to
617 correspond with the default .conf files.
618 kes Rewrite the Win32 service routines. This eliminates the 3 copies
619 some different, of the same file created by RN when porting the
621 kes Rearrange some of the Win32 directories and the placement of the files
623 kes Set DEVELOPER flag in version.h
625 ========================================================================
626 Release Version 2.2.0
628 kes Apply a second doc patch from Marc.
629 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
630 improves the tips section that discusses how to setup multiple
633 kes Update bat README file.
634 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
635 corrects a typo in the Recycle status check in db_find_next_volume().
636 This will probably fix a number of annoying problems with multiple
638 kes Modify most of dird/msgchan.c to use bsock class calls rather than
639 bnet calls -- no functionality change.
641 kes Modify the Verify output to specify if files are missing on
642 the Volume(s) or disk. Fixes confusion in bug #916.
643 kes When more than one Volume is read in a migration job, the last
644 Volume bytes reported are from the last read volume rather than
645 the last written volume. Fixed. This fixes bug #910.
646 kes Fix display of Recycle flag after update volume=foo recycle=yes.
647 It previously printed New Recyle flag is: no. This fixes bug
650 kes Correct seg fault when switching tape drives during restore.
651 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
652 be used until after 2.2.0 release.
654 kes Remove fnmatch() in SD that permitted wild card specifications.
657 kes Fix %g in filename returned by SQL for browse tree reported by
659 kes Fix configure so that it puts config.out in the cwd rather than
661 kes Attempt to fix the locking problem reported by Eric in bug #906.
662 kes Make berrno class to leave errno unchanged after constructor call.
663 kes Make bnet_server use the heap rather than the stack to allocate
664 its socket fd pointers to avoid a crash at termination. Problem
665 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
667 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
668 and putting it in depkgs-qt along with Qt4.3.
670 kes Rework code in acquire.c that switches drives for reading when
671 the Media Type does not match. This should fix bug #906
673 ebl Fix a director segfault during job setup #907
674 kes Correct seg fault in postgresql when first operation returns no
675 rows. Fixes Dirks File browser problem seg fault with bat.
677 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
678 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
681 kes Implement PopUp YES/NO dialog for bat.
683 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
685 kes Correct RunScript to terminate job in FD on failure.
686 kes Change abort_on_error and AbortJobOnError to fail_on_error
687 and FailJobOnError in RunScripts.
688 kes Minor tweaks of code formating in RunScripts, principally to
689 avoid depassing 80 columns.
691 kes Eliminate one #ifdef Win32 in bsmtp
692 kes Implement grow tool to grow a file for testing very large databases.
693 kes Add big-vol-test to test Bacula seeking with > 5GB.
696 kes Modify find_next_volume() to return all values in Media record.
697 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
701 kes Update Release notes
703 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
704 Warning, in previous beta version, all media get from scratch keep their
707 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
708 This should fix bug #842. Made a note to look at removing the temp
709 files at the end of the install.
710 kes Add ability to mount and unmount a file device providing it is
711 marked as being removable and has the appropriate mount and unmount
712 commands defined in the Device resource. This fixes bug #830.
713 kes When applying a storage override, release all previous storage
714 definitions rather than just prepending the new storage.
715 This should prevent a good deal of confusion.
717 kes Implement ./configure search for qwt libraries.
719 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
720 Win32 FD. This should fix bug #893.
721 kes Remove an unnecessary beep in Win32 init code.
722 kes Update copyright dates in Win32 executable about boxes.
723 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
724 code with a BSD getopt.c and getopt.h.
725 kes Remove sched.h from the Win32 compat directory -- not used.
726 kes Remove the Exit menu item from the Win32 tray monitor. If you really
727 need to shut it down, do it through the services panel or the command
729 kes Remove some inappropriate Bacula FSFE copyrights.
730 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
731 kes Fix regress config non-portable test as pointed out by
732 Florian Heigl <florian.heigl@gmail.com>
733 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
734 as pointed out by Florian Heigl <florian.heigl@gmail.com>
736 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
737 Reported by Frank Sweetser.
741 kes Fix client-only build.
742 kes Integrate client-only fixes for bsys (initgroups) and conio from
743 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
744 kes Make arguments to get_scratch_volume() in same order as other
746 kes Rework the prune_volumes() subroutine so that after purging and
747 no volume found in desired pool, it will check for a scratch
748 volume. This prevents recycling the whole scratch pool.
749 kes Add code to status storage to print boffset_t (largefile support).
751 kes Move qwt (Graphics libarary for Qt4) to depkgs.
752 kes You now need a --with-qwt=<dir> to be able to build bat.
753 kes Update src/win32/cats/bacula_cats.def to include the new
754 db_get_query_dbids() call on Win32.
756 kes Correct a problem when selecting a scratch volume and moving
757 it to another pool that lost some columns.
758 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
759 kes Enhance Autochanger error messages to include Volume and device name.
760 kes Rework prune_volumes() code to take account of InChanger flag,
761 and to handle recycling volumes going to the Scratch pool and
762 current pool because the RecyclePool directive.
763 kes Implement a better and more efficient db_get_query_dbids() to
764 handle creating and passing back a list of DBIds.
768 kes Start work on new more efficient DBId subroutine. First use
769 will be for recycling volume to Scratch inchanger.
770 kes Increase number of JobIds in pruning from 1000 to 10000.
771 This to be replaced by above routine.
772 kes Begin implementation of building Qt4 on Win32.
773 kes Correct typo in fix I added for bad TLS shutdown.
774 kes Pull 2.0.3 patches into patches directory.
775 kes Update Release notes. Include qt-console in line count.
776 kes Update Projects file.
778 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
779 bug in migration code where a job that spanned two volumes
782 kes Implement new BST_DESPOOLING blocked state. Change from locking
783 during despooling in SD to blocking. This means that other threads
784 can work with the device structure, in particular the reservations
785 system while despooling.
787 kes Fix return in reservation message queue that missed clearing
788 the jcr lock (implemented 26Jun07 below).
789 kes Rename a number of dev methods to make locking function names
791 kes Document locking in lock.c. Move lock structures to new file
794 kes Move reservations message lock to lock jcr only this
796 kes Move main SD locking code into lock.c (new file).
797 kes Update Win32 build to include lock.c
801 kes Dirk committed the qwt library code for drawing graphs in bat.
802 kes Tweak install of qwt so that it is integrated with ./configure.
804 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
805 out by Eric (my typo).
806 ebl Fix configure.in to get batch mode enable
807 kes Return correct string from authenticate.cpp in bat when connecting
809 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
810 spurious line drops when using TLS.
811 kes Do not file reparse points when restoring a file that already
814 kes Implement Windows reparse points -- similar to directories, but
815 we do not descend into it. This is a first cut. They seem to
816 be backed up, but restore is not yet tested.
817 kes Remove restore_blocking in tls code when shutting a socket to leave
818 it in blocking mode. Hopefully this will fix the encryption bug
819 reported by Frank Sweetser.
820 kes When opening a file for backup, tell the OS that we are going to
821 read it sequentially -- optimization.
822 kes Change variable names in authenticate_director() to not conflict
823 with member names in bat. Caused great confusion with compiler,
826 kes Queue openssl error messages in case of comm problem.
827 kes Do shutdown() call if socket terminated.
828 kes Remove some duplicated code in tls.c
829 kes Move more of the bsock member variables into private and access
831 kes Add Frank Sweetser's tls-test to the regression suite.
833 kes Add Swedish sv.po file
835 kes Don't print clock skew message in FD if less than 3 seconds diff.
836 kes Add a bit of VSS info to status client.
837 kes Implement a first cut of Vista VSS, using Win2003 code.
841 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
842 loaded tape but uses first drive).
843 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
844 This was indeed a Win32 issue.
846 kes Simplify search of autochanger for in-use Volume.
847 kes Fix exit condition of check for in-use volume. kes Remove
848 inappropriate my_postgresql_free_result() in db_close()
850 kes Fix bad return in FD when encryption signature not found.
851 Probably caused a crash.
852 kes Inhibit missing encryption signature error messages for
853 file types where no signature computed.
854 kes Correct inverted check on autochanger in reservation system.
855 kes Tweak debug code in autochanger reservation.
857 kes Add some additional locking in the cats directory in subroutines
858 that modify packet variables called from batch insert.
859 kes Rework how dcrs are allocated. new_dcr() can now be called
860 with an existing pointer, and it will simply clean it up.
861 This allows the reservation system to test various different
862 devices, and will permit easy device changes.
863 kes A bunch of changes all over to handle new new_dcr() calling
865 kes Work more on the Volume management in the SD. Remember Volumes
866 for tape drives and for autochangers (even virtual disk changers).
867 kes When looking at the Volume list to reserve a drive, handle
868 autochanger names correctly by interating through the changer
869 devices. Also call the Director to see if a Volume is suitable
871 kes Fix some bugs in bscan. Make sure all media records are written.
872 Make sure that valid JobMedia records are written for disk files.
873 Previously they were completely wrong.
874 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
875 that the URLs don't change and so that the developers will all
876 work off the same copy. Rebuild from scrach.
877 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
881 kes Fix seg fault in FD from incorrect digest size.
882 kes Fix argument to non-OpenSSL crypto.c subroutine.
886 kes Remove a few malloc()s from the encryption code.
887 kes Use the class calls to bsock in filed/backup.c and restore.c in
888 place of the old bnet_xxx code.
889 kes Implement code that does an on the fly calculation of the
890 signing digest during restore of encrypted files. It makes
891 a best guess at the algorithm, and if it is not correct, will
892 then revert to the old code which reads the file after it is
894 kes Implement at least one missing crypto stream in stream_to_ascii()
895 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
896 #877 where a reload with bad syntax causes Dir to exit.
898 Cut: 2.1.14 beta (not released)
900 kes Do not free a volume on a tape drive until another volume is
901 mounted and read, or the autochanger unloads the volume.
902 This should help the SD re-use volumes that are already mounted,
903 and should fix bug #886.
904 kes Apply patch from user brettedgar that allows gnome2-console include
905 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
906 kes Apply patch from Lucien Weller that fixes day of week calculation
907 because of DST flag problem. Fixes bug #887.
909 kes Move find_next_appendable_volume() to after acquiring a valid device
910 in reserve.c. This fixes bug #864 -- confirmed by reporter.
912 kes Unable to reproduce bug 872. However added additional testing for
914 kes Bug #874 resolved by documenting SQLite limitations.
915 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
916 kes Bug #881 resolved by removing typo in mtx-changer script.
917 kes Made Frank Sweetser's wiki the official Bacula wiki with his
918 approval. Added a link to the wiki on the web page, and implemented
919 a backup from http://paramount.ind.wpi.edu
921 kes Fix update allfrompool to pass pool name.
923 kes Convert to pure GPL v2 license.
924 kes Fix sscanf problems reported by Peter Buschman that caused
925 a bus error on Solaris.
926 kes Rework (simplify) the select prompt in bat.
927 kes Move get_jobid_from_tid() into lib and create a
929 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
930 should definitely fix the problem of lost error messages in the
932 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
933 kes Eliminate tcpd.h from the project. Enclose the #include from the
934 library with extern C ...
935 kes Add print of signal name when a signal is trapped.
939 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
941 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
942 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
943 makes SQLit3 run 30 times faster, though a bit less safe.
944 kes Implement --with-batch-insert in configure and detection of thread
945 safe libraries. It is on by default, but turned off if no thread
946 safe library (e.g. SQLite 2) is available.
948 kes Fix Bacula PostgreSQL buffer overruns.
949 kes Do better checking for NULL results returned from PostgreSQL;
950 implement retry for failed queries; clear results buffer after
951 failed query. Hopefully this will correct the PostgreSQL failures.
953 kes Implement algorithm to handle only one appendable volume with
954 Prefer Mounted Volumes = no.
955 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
956 returned from a query.
957 kes Make volume lock recursive.
958 kes Implement an additional volume reservation algorithm that
959 starts by considering all reserved volumes then uses the
960 old brute force algorithm of searching the resources to
961 find a suitable device.
962 kes Add new reservations debug code and refine the old code.
963 kes Update the win32/dll/bacula.defs file.
965 kes Tweak reservations algorithm to permit a few more cases, i.e.
966 volume reserved, but on different drive, ...
967 kes Enhance SD status to include Pool and Media Type for drive in a
968 more readable format (a bit longer).
969 kes Fix PostgreSQL double free.
971 kes Minor refactoring of restore decryption code.
972 kes Add code to smartall.c to detect double free of a buffer.
974 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
975 so that bsmtp will create a correct email address (mailbox only).
976 kes Modify 'memory' command so that the buffers are listed as 'In use'
977 to avoid confusion with Orphaned buffers.
978 kes I reworked the OpenSSL include/lib flags to be handled in
979 the standard Bacula way, which should fix bug #863 concerning
980 non-standard OpenSSL libraries.
982 kes Implement Help Browser window for bat.
983 kes Fix reload bug that reset StorageId to zero.
985 kes Fix TLS #ifdefing when TLS turned off.
986 kes Ensure that when labelling a tape with Slot=0 that InChanger
988 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
990 kes Add StartTime to final uar_sel_jobid_temp query so that we can
991 add DISTINCT (required by PostgreSQL).
992 kes Implement BSOCK authenticate_director() method. Eventually will
993 authenicate all daemons.
994 kes Move several more functions into the BSOCK class.
996 kes Add code to tell the OS that we no longer need a cached
997 file that we were reading. In findlib/bfile.c. Also,
998 only cache files that we are reading. Thanks to
999 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1000 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1001 kes Implement script to automatically generate cats and dll .def
1002 files for Win32 dll.
1003 kes Update README.mingw32 to include new .def file generation.
1004 kes Correct typo in UTF-8 error message as reported by:
1005 jhernandez <julianhernandez@gmail.com>
1006 kes Add additional sm_check() code on debug level 1.
1007 kes Set default debug level to 1.
1008 kes Trap SIGABRT in attempt to get traceback.
1010 kes Reduce bat connect timeout from 30 to 15 seconds.
1011 kes More restructuring and implementing BSOCK class in place of
1013 kes Remove a few unnecessary malloc() tests in crypto code.
1014 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1015 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1016 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1018 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1020 kes Fix Verify InitCatalog. The attributes were not pointing to the
1021 correct saved location.
1022 kes Implement message callback so that GUI is sure to get all
1023 daemon messages. Currently displayed in a dialog in bat.
1024 kes Ignore SIGUSR2 (Bacula timer) in bat.
1025 kes Apply regress patch from bug #859 to allow regress to work
1026 with Solaris compiler.
1028 kes Begin adding TLS support to bat.
1029 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1030 clean up lex.c and make it more readable.
1032 kes Move more bnet functions into the BSOCK class.
1033 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1034 kes Complete change of berrno strerror() method to bstrerror()
1036 Release: 2.1.10 beta
1038 kes Cleanup incorrect email addresses in bsmtp.
1039 kes Make bat display initial messages rather than discard them.
1041 kes First cut of adding .mod to the run command.
1042 kes Implement auto display of messages in bat.
1043 kes Enhanced preferences to allow all Bacula output to be
1046 kes Try to make bsmtp date routines more generic.
1047 kes Fixed bug #856 autochanger documentation.
1048 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1049 kes Add new cats entry point so Win32 builds.
1051 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1053 kes Do better checking for the MySQL 64 bit libraries looking for both
1054 .a and .so libraries.
1055 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1056 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1057 kes Require the thread safe version of MySQL during configure. Thanks
1058 to Andre Noll for pointing this out.
1059 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1060 continuing in migration code.
1061 kes Apply implementation of tray-monitor font derived from gnome-console
1062 submitted by Andreas Piesk <a.piesk@gmx.net>
1064 kes Eliminate important memory loss in SQLite
1065 kes Fixed the batch insert MySQL thread specific data that was not
1066 being freed. See cats/mysql.c:db_thread_cleanup().
1067 kes Fix restore before command.
1068 kes Convert old hdr.name to name() in a few places.
1069 kes Implement update jobid command.
1070 kes Return all time_t dates in db_get_job_record()
1071 kes Stop watchdog in SD earlier.
1072 kes Put Pool just after Storage in please mount message.
1073 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1076 kes Update the po files.
1077 kes Fix Verify InitCatalog by making it cache attributes.
1079 kes Change name bacula-bat to bat for man 1 page to correspond to
1081 kes Check for client and store NULL pointers in status command. This
1083 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1084 kes Fix sign extended editing of %p.
1085 kes Clean out a little old #ifdefing in cats/mysql.c
1087 kes If time diff between DIR and FD is more than 600 seconds convert
1088 INFO message to WARNING.
1089 kes Implement heap size display in status for all daemons.
1090 kes Attempt to fix MySQL db open memory loss (not successfull).
1091 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1092 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1093 Query. This looks like a MySQL but but by doing extra releases,
1094 the memory goes away. This should fix bug #847.
1096 kes When backup fails, cancel SD before waiting for sd termination.
1097 kes If SD is waiting for FD to connect during cancel, wake up the
1099 kes Fix fsf code so that errno is correctly reported.
1100 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1102 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1103 so that Bacula doesn't later stumble into a seg fault.
1104 kes Use the term Restore Client in the restore Job report.
1105 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1106 the original job's FileSetId.
1107 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1108 spooling in migration jobs. Not yet tested.
1109 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1110 reading conf file from a pipe. However, do it with open_bpipe()
1111 rather than popen. Not yet tested.
1113 kes Fix an ugly bug where the VolCatBytes were getting updated
1115 kes Implement bconsole memory command that prints current memory
1116 usage, plus smartalloc dump.
1117 kes Clarify some error messages in backup, admin, and migrate.
1118 kes Shrink label dialog to smaller size.
1119 kes Invert Cancel OK buttons on restore to be OK Cancel.
1120 kes More strerror() to bstrerror() conversions.
1122 kes Start implementing bstrerror() in place of strerror().
1123 kes Stripping path -- seems to work.
1125 kes Prevent door and port files from being restored (mostly
1127 kes Free an unreleased buffer in compat code.
1128 kes Change console Job name from *Console* to -Console- to eliminate
1129 Win32 filename problems. Put Win32 path separator when creating
1130 Console file. This fixes bug #846.
1131 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1133 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1135 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1136 to force Win32 error message.
1138 kes First cut strip path. The data should be passed to the FD,
1139 but nothing is done with it yet.
1140 kes Enhance the digest and signature routines in the crypto
1141 library to accept a JCR and to use it to print error messages
1142 so that they will go in the Job report rather than the daemon's
1144 kes Simplify some of the verify signature code.
1145 kes Simplify a few of the alternative returns in the signature
1148 ebl Use only POSIX regex instead of GNU regex in breg.c for
1149 File relocation. It fix broken freebsd compilation.
1150 kes Convert all other Dir files to use new ua class message
1152 kes Tentative fix for missing digest signature in bug 807.
1153 kes Correct handle problem in new win32_ftruncate routine.
1154 kes Convert ua_purge.c and ua_update.c to use new ua class
1155 message routines for bat.
1157 kes Correct incorrect installation of LICENSE in Win32 installer.
1158 kes Display LICENSE at the beginning of the Win32 install.
1159 kes Attempt to correct the need for the png files to be installed
1161 kes Reapply my bat.conf install script in qt-console. I think I
1162 editted bat.pro instead of bat.pro.in and it was lost.
1163 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1164 the /var/lock/subsys for subsysdir. Also corrects typos in the
1167 kes First cut update job.
1168 kes Correct configure to include qmake of src/qt-console directory.
1170 kes Make restore job yes/mod/no print in one command so GUI works.
1171 kes First cut implementing backup and restore client.
1172 kes Correct editing in Verify output that caused a seg fault.
1174 kes Insure that bat.conf is not overwritten during installation.
1175 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1176 while I was implementing migration in March 2006 !
1178 ebl Cleanup file relocation, using char *RegexWhere instead of
1179 char *where + bool where_use_regexp
1180 kes Update some manpages and add bat manpage.
1181 kes Make a first cut at converting bacula.spec.in for bwx-console
1183 kes Apply patch from John Goerzen to add hostname as fourth argument
1184 to make_catalog_backup script.
1185 kes Fix typos I introduced into bsmtp.c
1186 kes Make pm_strxxx() routines handle input of NULL pointer. This
1187 is to protect from NULL pointers returned from SQL databases.
1188 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1189 kes Add more debug to FIFO code -- fix fifo regression test.
1191 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1192 kes Add thread timer to bnet_connect() to break from OS if wait time
1195 kes Update Win32 build to include new files, new symbols, and
1197 kes Implement socket level heartbeat (tcp_keepidle)
1198 ebl Commit File relocation patch
1199 kes Make bat have 'make install' target.
1200 kes Warn during install if old gnome-console binary found.
1201 kes Warn during install if old wx-console binary found.
1202 kes Add -8 option to bsmtp command line to add content type utf-8.
1203 Fixes bug #809. (Character coding problem in bsmtp).
1204 kes If < is found in target (from, to, cc) then do not enclose the
1205 target in < > in bsmtp. Fixes bug #772 (malformed address).
1206 kes When printing certain items in dbcheck, stop after 300000.
1207 Fixes bug #822. (dbcheck loops).
1208 kes Incorrect status in Dir after waiting for mount with poll set.
1211 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1213 kes Print waiting to reserve a device every 5 mins.
1215 kes Don't call close_part in label.c if tape and relabel.
1216 kes Don't free volume if busy in close() -- should help with
1218 ebl Fix #824 RunScript bug (After script could be execute twice)
1219 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1220 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1221 Add a regression script to test RunScript
1223 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1226 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1227 deprecated. No additional bugs will be fixed, and they will be dropped
1228 in a future release (probably 2.4.0).
1229 kes Change name of wx-console to bwx-console to make it more Bacula
1231 kes Change the name of gnome-console to bgnome-console to make it
1234 kes Some time in March, a Feature Request with patch from Jorj Bauer
1235 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1237 The ability for the director to validate a Client (FD) CN against
1238 an arbitrary set of patterns rather than the hostname, with
1239 A new 'TLS Allowed CN' set of directives which are implemented
1240 in the Client resource. Then pattern matching is used in place
1241 of hostname matching against the Certificate's CN. As an example, we
1242 have certificates which (a) use a local CA, and (b) have a CN of the
1244 kes Add new/changed entry points to Win32 build
1245 kes Create unaccepted-projects for projects that are not accepted.
1246 kes Simplify locking in the reservations system.
1247 kes Add more debug code in reservations.
1248 kes Make sure error condition on reserving a volume is handled correctly.
1249 kes Correct handling of volume_in_use.
1250 kes Correct handling of initializing a device.
1251 kes Move handling of broadcasting releasing a device into release_device().
1252 kes Correct attaching dcr to dev so that it is only done if device
1253 is properly initiated.
1255 kes Locking debug level tweaks in SD.
1256 kes Tweak new Volume code.
1258 kes Add exec external-command [wait-seconds] to bconsole. This
1259 executes the external-command. Note! normally external-command
1260 should be enclosed in double quotes.
1261 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1262 it should normally be off in a production system.
1264 kes Implement die command for SD so that we can force it to dump.
1265 kes Implement SD lock debug code.
1266 kes Implement new algorithm for keeping Volume list in SD. It
1267 is now owned by the device.
1269 kes Implement new code for freeing in use volumes that should
1270 resolve if not all, some of the problems of multiple drive
1271 tape conflicts described in bug 801.
1273 kes Fix gui/bacula-web/images files in svn.
1274 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1276 ebl Fix a bug in batch mode (in string escape)
1277 kes Correct migration prune SQL typo that crept in in a
1278 recent 2.1.x change.
1280 kes Move bnet_despool() into class in bsock.c
1281 kes Modify job report to include director name and Build OS.
1282 kes Move drop root privilege and check_catalog() before fork.
1283 kes Add update database scripts (version 9 to 10) to updatedb directory.
1285 ebl Check size and age of each file after its backup to see if
1286 it has changed during backup, if 'checkfilechanges' is set.
1287 The FD will do an extra check (stat(2)) after
1288 each file backup. mtime, ctime and size are compared with
1289 'before backup' information. If time or size mismatch, an
1290 error message will be generated. You must upgrade FD to use it.
1292 kes Make database name and user configurable
1293 --with-db-name=xxx --with-db-user=xxx
1294 kes Add back database type to message.c for debugging.
1296 kes Implement dir_sql() which issues an SQL query.
1297 kes Modify bat medialist to use dir_sql() and do some minor C++
1298 formatting as well as eliminating a number of pointers, simplifing
1301 kes Fix some of the mtx-changer grep commands for tape label readers.
1302 kes Convert a number of bsendmsg into the appropriate send/warning/error
1303 message class calls.
1304 kes Suppress the using database message in the .sql command.
1305 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1307 kes Add context menu for floating a window.
1308 kes Some minor cleanup and name changes in qt-console
1309 kes Add doing mt setblk 0 in Win32 mtx-changer.
1310 kes Apply Martin's bug fix to move definition of ENODATA for
1312 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1313 sqlite2 and sqlite3.
1315 kes More pruning cleanup.
1316 kes Turn on wait_for_drive by default in mtx-changer.
1317 kes Turn on Batch insert code by default as it now passes regression.
1318 kes Add ./configure --enable-bat to enable building of Bat.
1319 No install yet though.
1321 kes Implement a new .sql command for bat.
1322 kes Implement code to turn off pruning in obtaining the next volume.
1323 Pruning is turned off for the status dir command, but turned on
1324 for SD requests and for the list nextvolume command.
1326 kes Correct Qmsg() that was not updated correctly when committing a
1327 previous change (probably the recent TLS patch).
1329 kes Write new subroutine is_volume_purged() that explicitly checks
1330 if the Volume is purged, and if so marks it as such. This should
1331 resolve problems reported about needing to mount twice to recycle
1333 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1334 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1335 amount of duplicated code.
1336 kes Do volume pruning only for the Media Type desired (reduces pruning time
1337 if multiple Media Types are in the same pool).
1338 kes Implement more detailed info in the Job report for the Bacula version
1340 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1342 ebl Add bbatch tool to bench database and insert mode.
1343 Fix sql quote stuff in batch mode
1344 Fix sql stuff for mysql
1346 kes Correct problems with am/pm scheduling. Fixes bug #808.
1347 kes Implement new prunning code that prunes up to 1000 jobs at
1348 the same time. The same technique can be applied to a number
1349 of other prune/purge subroutines.
1350 kes Add an insanity check when starting a new tape job to ensure
1351 that the tape position has not been changed. If so fail the
1353 kes Fix Win32 build for dlls to add the folllowing:
1354 src/lib/bsock.c -- new file with new entry points
1355 src/lib/dlist.c -- new entry points
1356 src/cats/sql_create.c -- new entry point
1357 src/cats/sql_cmds.c -- new DATA item exported
1359 ebl batch mode cleanup bscan-test is ok now.
1360 kes Implement SD code to check length of disk volume before appending.
1362 kes Correct return status on db_batch... routines.
1363 kes Add call to db_write_batch_file_records() to migration code.
1364 ebl Fix AfterJob timing
1365 kes Move the checking of the database in initializion of the Director
1366 to after we drop privileges. This avoids the need for both root
1367 and bacula access to the DB.
1368 kes Correct a misplaced variable definition in src/filed/backup.c
1369 kes Correct how the new batch insert db_create_attributes_record()
1370 uses the arguments. Caused a seg fault in bscan.
1371 kes Implement lock() and unlock() methods in DEVICE class.
1372 Implement block() and set_block(xx) methods in DEVICE class.
1373 kes Modify bnet_connect() so that it uses time() to check for the
1374 wait time expiring (on some OSes, some system calls may not
1375 return immediately).
1376 kes Modify Verify to obtain the previous JobId when it is actually
1377 running rather than at schedule time (as it was in 1.38.x).
1378 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1380 kes When checking pid in pid file, continue running if the pid is
1381 the same as ours. This occurs on IRIX after a system crash.
1384 kes Extend new GUI API.
1385 kes Make the ua structure a class, and implement send_msg(),
1386 error_msg(), warning_msg(), and info_msg().
1388 kes Apply fix from for building wx-console on the Mac from
1390 kes Implement new select mechanism for GUI programs.
1391 kes Reorganize initialization of stackedWidgets in bat.
1393 kes Add updated nagios plugin supplied by Christian Masopust.
1395 kes More bat implementation.
1396 kes File migrate bug with Pool Occupancy using mediaid instead
1397 of jobids. Fixes bug #795.
1398 kes Fix orphaned buffers in filed backup and verify due to
1399 crypto buffers not freed during errors. Fixes bug #789.
1400 kes Extend new GUI api code to tree commands.
1401 kes Ensure that tree and dot commands check console ACLs.
1402 kes Permit marking directory with trailing slash.
1403 kes Allow 20 console connections (instead of only 10).
1405 kes Add smartctl call to bacula-sd.conf as an example of getting
1408 kes Modify jobq.c to let simultaneous restore jobs run. This may
1409 cause them to fail if they cannot get a drive.
1410 kes Add Client Connect Wait to Storage daemon to permit users to
1411 modify the time the SD waits for a FD connection.
1413 kes Correct virtual changer check which was backwards. This caused
1414 volumes to be unloaded into slots already occupied.
1416 kes Apply Command ACL filter to JobId list in restore command.
1417 kes Correct typeo in var.c patch.
1419 kes Don't let Bacula prune File or Job records for the current Job.
1420 kes Fix variable substitution pad + inc bug reported (with patch)
1423 kes Correct SQLite log table index as reported by Luca Berra.
1425 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1427 kes Begin implementing new comm signals for API.
1428 kes Fix a few places in lib/message.c where the open fd may
1430 kes Continue implementing lib/bsock.c (real class). Make jcr,
1431 who, host, and port private. There are new methods to access
1432 them for non-class use. This required touching a number of files.
1434 kes Add LANG=C to autoconf/randpass so it works with languages other
1435 than English. Fixes bug #788.
1437 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1439 You will not be able to generate Include/Exclude list any more.
1440 It will be fixed soon.
1441 If you want to use this, you can apply
1442 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1444 kes Restore of sockets created false error messages because Bacula
1445 no longer restores sockets, but the code was still trying to
1446 set the attributes on a non-existent file. Reported by a user.
1447 ebl finish RecyclePool feature
1448 Media will takes Pool.RecyclePool
1449 when moving from Scratch to a Pool or when user will do
1450 update volume=xxx frompool
1451 To use it, add RecyclePool = aPool to your Pool resource
1454 RecyclePool = Scratch
1458 kes Expand new BSOCK class adding signal() and new BNET signals.
1459 kes Begin enhancing the dot commands adding a new API function
1460 that returns more information and will make it easier
1461 to interface to the Director from a program.
1463 kes Make DEVICE fd private. Its new name is m_fd, and can be
1464 obtained with dev->fd() outside the class. This is the
1465 first of many DEVICE members to be made private.
1466 kes Implement Michael Renner's idea on having a virtual disk
1467 changer. I made some minor modifications (e.g. I did not
1468 implement the Virtual Changer directive, but simply set
1469 the Changer Command to an empty string.
1471 kes Implement a BSOCK send() method that writes the whole record
1472 in a single write() request rather than in two.
1473 ebl add update volume=xxx recyclepool=yyyy
1474 volume takes recyclepool from pool when using update volume=xxx from pool
1476 kes Fix encryption deblocking bug, which caused some restored files
1477 to be truncated. This fixes bug #763.
1478 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1479 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1481 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1482 ebl Use btime_t instead of uint64_t in media patch.
1484 kes Optimize the use of the database a bit in the Status dir command.
1485 Only open it when needed, ensure that if any previous database
1486 was opened, it is closed.
1488 kes Correct VolCatBytes bug from media patch.
1489 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1490 in the case of orphaned records.
1491 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1492 and File records in 300K chunks to be more efficient. This
1493 idea came from Juan Luis Frances (if I remember right).
1494 kes Apply Eric's scratch patch that moves a purged Volume to
1495 the RecyclePool. Question: how is RecyclePool set? what
1496 happens to the ScratchPool?
1497 kes Apply Eric's media patch that collects read/write media
1498 times as well as byte counts. This patch requires a
1499 simultaneous upgrade of the DIR and SD. Note, there
1500 should be some way to turn off timing. I'm not sure
1501 times are in Bacula units.
1502 kes Apply Eric's batch-insert patch.
1504 kes Update projects list.
1506 kes Implement Include/Exclude file lists in FD as dlists using
1507 the new dlistString class. This permits efficiently having
1508 large include/exclude lists and completes project Item 25.
1509 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1510 console is authorized to cancel the job. This fixes bug
1512 kes Modify SD so that the VolCatJobs medium record is updated
1513 at the beginning of a Job rather than the end. This
1514 fixes bug #775 where exceeding MaxVolJobs caused jobs
1516 kes Added a mutex around getting and setting Volume information
1517 so that multiple simultaneous jobs will single thread.
1519 Switch to using Subversion
1520 kes Remove src/pygtk-console/ from configure
1522 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1523 plus the entrypoints.
1524 kes Apply patch supplied that corrects debug print
1525 in canceling jobs for max run time. Supplied as
1526 part of bug #621, which was previously fixed.
1528 kes Test on job_canceled() and sd_msg_thread_done inside
1529 loop starting the message thread to avoid a race condition.
1531 kes Remove rl_catch_signal from console.c as it conflicted
1532 with the header definition. Fixes bug #765.
1533 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1535 kes Clarify some stored/acquire messages to indicate if the
1536 problem is with read or append.
1538 kes Fix memory leak with storage ids in cats/sql_get.c
1539 kes Terminate watchdog earlier to avoid reference to released
1540 memory -- reported by Jason Austin.
1541 kes Move closing the database from jobq.c to the director daemon
1542 termination routine. This fixes memory leaks for shadow jobs
1543 (i.e. migration jobs).
1544 kes Free up the unique jobid chain items in migrate.c. This fixes
1545 a memory leak problem.
1546 kes Convert some ugly looking for statements to use foreach_alist
1547 in findlib/find.c. This will facilitate converting the structures
1548 to use dlist (for large include/exclude lists).
1549 kes Fix a bug in the btree.c and btree.h routines, then rename them
1550 rblist and add them to be built in src/lib. Include some new
1551 methods written by Rudolf Cejka that make the code more readable
1552 (hides some of the ugly casting).
1553 kes Add set_next() and set_prev() methods which make the code much more
1554 readable. Also add a new dlistString class that facilitates storing
1555 strings in dlists. To be used in the large include/exclude lists.
1556 kes Make some trivial modifications to lib/tree.h that use rblist
1557 rather than dlist for storing the tree links. This was suggested
1558 by Rudolf Cejka. The result of this is that the restore tree now
1559 uses red-black binary trees rather than simple linked lists. This
1560 should give rather dramatic speed improvements for directories
1561 contining large numbers of directories/files (more than 10000).
1563 kes Fix maxruntime bug #621.
1565 ebl Implement the include JobID in spool file name project.
1566 kes Reorder projects file in order determined by Jan 2007 vote.
1567 kes Implement item #12 on project list -- quick release of FD by
1569 kes Fix open of SQLite3 db where user does not have write permission
1570 so that DIR does not crash. Fixes bug #761.
1572 kes Add back missing @ in Win32 Makefile.
1573 kes Change 'Device not configured to autolabel' from INFO
1575 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1576 which should restart an indefinite # of times.
1577 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1578 other DIR specifications.
1580 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1581 Fix path quoting in SQLite scripts.
1582 Fix problems with SHGetFolderPath.
1584 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1586 kes Fix Job restart on error bug that promotes an Inc to a Full
1587 backup. This should fix bug #755.
1588 kes Add qt-console and first cut of code.
1592 kes Fix Bacula->Documentation link on Win32 to point to index.html
1593 instead of bacula.html. Fixed bug #750.
1594 kes Return JobId in db_get_job_record() when JobId==0. This should
1596 kes Do not release source pointers when restarting a failed job.
1598 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1599 This *should* fix bug #747.
1600 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1603 kes Modify USTORE constructor to set an empty store_source string,
1604 and don't copy the store_source string in a cancel. Hopefully
1605 this will fix Arno's seg fault, bug #744.
1606 kes Add back code to disable conio in configure. Fixes bug #743.
1607 kes Correct the Options scanner in the FD to correctly handle
1608 SHA1 option, which was eating the next option. Reported by
1610 kes Add code to indicate when the SD is spooling, spool wait, and
1611 despooling as requested by Alan Brown.
1613 Version 2.0.0 released: 4 January 2007