1 Technical notes on version 2.4
5 kes Make watchdog connect timeout queue messages rather than sending
6 directly to avoid lock conflicts with the real thread.
7 kes Remove const char that causes problems with Python, which has
8 older 'incorrect' headers.
9 kes Add const char in dbd.c to avoid compiler warnings.
11 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
12 mt. This fixes bug #1116.
13 kes Fix failure of 2drive-concurrent-test. Always read label;
14 clear_unload() only after drive is defined in acquire_for_read().
16 Release Beta version 2.4.1-b1
18 kes Back out bad src/lib/base64.c change.
20 kes Generally clean up the manual tape loading code. The main
21 conceptial change is that when a volume is marked to be unloaded,
22 its volume name is retained, and it is only marked as unloaded
23 when either the autoloader says it is unloaded or another tape
24 is read on that drive.
26 kes Fix a recycling problem with two autochangers reported in bug
27 #1106. This may also (unlikely) fix a second recycling bug as
29 kes Fix a SD lock volumes deadlock problem reported in bug #1100.
31 kes Fix format problem in bscan output reported in bug #1105.
33 kes Copy more data when restarting a job so that run
34 overrides are kept. This should fix bug #1094.
35 kes Backport updates to jobq.c where possible.
37 kes Fix bug where SD did not ask operator if the device could not
38 be opened. Reported by Eric.
40 kes Add dbuser to DIR conf file (replaces user).
41 kes Add --with-db-password to ./configure
42 kes Fix regress to handle db_password.
43 kes Fix a couple of pedantic compiler warnings.
44 ebl Fix bug when starting a restore on a storage that doesn't
45 have the requested MediaType.
47 kes More work on word alignments -- eliminate all ints from
48 the configuration routines.
50 kes Fix bug reported by Scott Barninger where the bacula script
51 refers to scripts in the wrong directory. Needed to meet the
52 requirements of recent FHS location changes.
53 kes Fix word alignment problem on non-Intel 64 bit machines
54 such as Solaris. This should fix bug #1097 -- bus error in SD.
56 kes Add missing win32/patches/wxWidgets.patch to 2.4 repository.
60 kes Update version to reflect the magnitude of the SD changes.
62 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
65 kes Add create_postgresql_database.sql to Win32 installer. Should
66 fix problem reported by Juilio Monteiro.
67 kes Get correct slot when auto unloading a device. This fixes bug
70 kes Fix multiple media restore.
71 kes Make DEVICE Slot private and access it via a method.
72 Allows better control over when it is set and cleared.
73 kes Fix possible seg fault if SQL error.
75 kes Add debug code to SD.
76 kes Fix renaming a Volume, which used the wrong Volume name.
78 kes If operator has rewind tape, print warning, release tape and
79 try once more. If tape is positioned somewhere, something went
80 wrong, so mark the tape in error and try once more. Previously
81 this error was fatal, now it produces an error message.
82 kes Ensure correct volume name displayed during restore
83 kes Ensure that Volume is mounted for restore.
85 kes Fix a few more Coverity reported problems.
87 Beta Release Version 2.2.10-b4
89 kes Enhance a couple of SD debug messages.
90 kes Tweak unload flag setting and ensure it is set during swap.
92 ebl Fix #1091 about bad output in estimate command.
94 kes Modify autochanger locking to attempt to avoid race
96 kes Make sure device not busy before doing label command.
97 kes Display open() errors except when polling. Previously too
98 many were suppressed. This should fix bug #1070.
99 kes Fix Win32 reparse points. Bacula will not recurse into any
100 reparse point directory, including mount points, unless the
101 directory is explicitly mentioned at the top level (same as
102 with Unix). A file that is linked to another file will be
103 backed up -- much as Unix does for hardlinked files.
104 This fixes bug #1041.
106 kes Remove double quotes from ChangeLog and ReleaseNotes
107 kes Remove StorageId test when pruning and recycling (Eric's changes).
108 kes Remove old form of locking when getting volumes -- causes deadlock.
110 kes Fix buffer overruns detected by Coverity.
112 Beta Release Version 2.2.10-b3
114 kes Tweak joblog display.
116 kes Implement --without-qwt
117 kes Fix layout of restore tree dialog
118 kes Add configure bat QWT libraries, so that bat can be built
119 with or without the QWT libaries.
121 kes Apply batfix bat cleanup patch from Riccardo.
122 kes Make sure we unload the right slot when swapping.
124 kes Improve SD reserve debug code.
125 kes Testing an improvement to free up volumes no longer in use.
127 Beta Release Version 2.2.10-b2
130 kes Rework SD acquire for read to handle autochanger Volume
132 kes Implement regression that explicitly tests swapping a Volume
133 from one drive to another.
134 kes Enhance disk-changer to detect most error conditions.
135 kes Fix SD code so that it properly swaps a Volume between drives.
136 This fixes bug #1083.
138 kes Prevent a Volume that is being swapped from being freed from
139 the volume list. This will most likely fix, at least partially,
141 kes Fix strippath so that it does not get a buffer overrun and crash FD.
142 This fixes bug #1078.
143 kes Make inability to change owner/group when creating a dir only a
144 warning rather than an error.
146 ebl Fix SQL query in migration code
148 kes Force unload of volume when wrong volume mounted in SD.
150 kes Fix bat seg fault at termination.
151 kes Add Bacula generated version to bat about box.
153 Beta Release Version 2.2.10-b1
155 kes Permit multiple simultaneous restores -- experiment.
157 kes Backport development stream SD reservation system changes.
160 kes Move final volume swapping code to DCR method and
161 call it from acquire_for_read().
162 kes When wrong volume is mounted during read, unload_autochanger.
164 kes Stop searching for Volumes in SD askdir if DIR returns the
165 same volume name twice in a row.
167 kes Tweak the swap Volume from one drive to another code so that
168 it now seems to work.
169 kes Resolve several problems with recycling that broke the new
170 code (these problems are in 2.2.9 as well).
171 kes Remove the volume lock when calling the sysop code.
172 kes Don't mark a reserved volume with no writers as unused otherwise
175 kes Rework class structures for VOLRES, DCR, and DEVICE to make
176 the method names a bit more logical, and for more logically
177 handling the responsibilities.
179 kes Remove redundant code in terminating the scheduler that just
180 causes a seg fault in many cases.
181 kes Cleanup releasing a volume and make it a DCR method.
182 kes Improve algorithm for detecting pre-reserved volume and
185 kes Tweak volume swapping code so it works.
186 kes Correct name overloading in mount.c
187 kes Replace released flag in VOLRES with reserved and add access
188 methods for the VOLRES class.
189 kes Prevent volume from being released while being swapped.
190 kes Refactor parts of stored/mount.c
192 ebl Add sanity checks for VolWriteTime and VolReadTime
193 ebl Take care of bad clock changes while computing VolWriteTime
194 and VolReadTime. This should fix or limit #1066
195 kes Correct error string numbers in dird/catreq.c
196 kes Restructure reserving, acquiring, and mounting volumes. Calls to
197 autochanger are deferred for mount.c -- simplifes the code.
199 kes Do not prune any running job. It just fails the job.
200 kes Lock the volumes when changing dev->reserved_device and marking
201 the volume unused otherwise the device can get reserved by
202 another job before the volume is released, thus blocking it.
205 Beta Release Version 2.2.9-b7
207 kes Close bat console windows first to eliminate error message
209 kes Remove useless code in Scheduler that causes seg fault on
211 kes Correct some SD catalog request error messages.
212 kes Don't allow pruning of any running job.
213 kes Turn off code in read_record that causes a seg fault in the SD
214 when reading past an EOS_LABEL.
215 kes Turn off unloading the autochanger in reserve.c as it just
217 kes Lock volumes when unreserving a device.
218 kes Do not mark volume unused when recycling.
219 kes When acquiring, don't mark volume unused if it is reserved (busy).
221 Beta Release Version 2.2.9-b6
223 kes Eliminate ./configure warning on po directory
224 kes Fix bug #1063, reuse of freed ptr in list nextvol.
225 kes Release regex compile buffer in filed/job.c
226 kes Add proper type of const char in sql_create.c
227 kes Turn off debug in daemon termination routines
228 kes Move free_volume_list() before devices are freed in stored.c
229 kes Fix reference to uninitalized stack variables in bregex.c.
230 This should correct bug #1067.
232 kes Fix possible seg fault in SD when freeing a volume entry.
234 kes Apply patch from bug #1069 that corrects spurious error messages
235 when ACLs enabled on SGI but no ACL exists.
236 ebl Fix a storage deamon segfault at debug level 500.
238 Beta Release Version 2.2.9-b5 -- not released
240 Beta Release Version 2.2.9-b4
242 kes Re-enable code to remember last volume mounted on a non-tape
244 kes Add patch supplied in bug #1068 that fixes a SD crash when using
245 a Virtual autochanger.
246 kes Generate correct JobMedia records during spooling/despooling when
247 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
248 <tih@hamartun.priv.no> for excellent analysis and testing.
250 Beta release Version 2.2.9-b3
252 kes Rework certain SD locking based on gdb tracebacks of deadlocks
253 sent by Eric. This code now uses only the volume_lock() rather
254 than the reservations lock when at EOM and acquiring a new
256 kes Ensure only one exit point in several subroutines.
258 Beta release version 2.2.9-b2
260 kes Fix to initial tape drive open to release the volume name
262 Beta release Version 2.2.9-b1
264 kes Fix to JobMedia fix.
265 kes Fix bug pointed out by Peter Much that causes the StorageId to
266 be updated when reading a tape (during migration, it could have
267 been incorrectly set to the write StorageId).
269 kes Implement autostart scripts for Debian
271 kes Fix mtx-changer.in for broken Debian mt program.
273 kes Massive commit of all fixes and back ports to create 2.2.9
275 kes Apply doc fix from bug #1062.
276 kes Resolve crash and improper restore wx-console Win32 restore
277 GUI. Fixes bug #1065.
278 kes Update Win32 wxWidgets to latest version.
279 kes Attempt to do correct handling of Win32 mount points. Should
281 kes Fix Win32 FD backup/restore memory leak due to improper termination
282 of BackupRead/Write. This fixes bug# 1038.
283 kes Add const to AIX prototype for initgroups()
285 kes Undo bug #1047 heap overrun fix as it is not correct.
287 kes Fix creating first JobMedia record during Migration to include
288 proper index. This caused slow restores of migrated jobs.
290 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
291 and do not strip paths on symbolic links.
292 kes Set catalog backup database and user name from values specified on
293 the ./configure line.
294 ebl Apply patch to correct bug #1031, about wrong pool source information
297 Release Version 2.2.8
299 kes Apply patch from Martin to correct bug #1040, bscan sets existing
301 kes Fixed important spelling error in doc -- bug #1045.
303 kes Move initialization of read/write res lock earlier in the code.
304 This fixes the crash with a null conf file. This fixes bug
306 kes Redefine CURES in lib/parse_conf to be URES and move it all
307 into lib/parse_conf.c -- this responds to bug #1042, but does
308 not fix it. The fix is not to compile with FORTIFY_SOURCE.
309 kes Backport fix de-referencing a NULL pointer in the scanner from
310 the trunk SVN. I don't think this was reported as a bug.
312 Beta release Version 2.2.8
314 kes Re-enable the new job code editing (%f).
316 kes Fix bsnprintf for float point numbers. I broke recently when
317 parameterizing some variables. This fixes bug #1036.
319 kes Move Heartbeat documentation from Job to Director resource.
320 This fixes bug #1033.
322 kes Fix existing switch drive SD code to call autochanger to release
323 any old volume. This must be done to keep the autochanger from
324 releasing subsequently newly reserved volumes in doing a close().
325 This should possibly fix bugs #1032 and #1018.
326 kes Apply big backport of current SVN SD code that corrects a number
327 of race conditions. This is a first step in fixing bug #1018.
329 ebl Fixes bug #1028 where "Selection Type" option was not usable
333 Release Version 2.2.7
335 kes Partial back out (disabled) %f job code editing because it
336 does not build on Win32.
337 kes Fix seg fault Frank Sweetser reports in regression testing
338 on his systems. The problem was that the original author of
339 bsnprintf.c did not take into account the side effects of
340 using ++x in the argument to a #define.
342 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
343 that implements double quoting include names in conf files,
344 and also allows piping input by having the first character
345 be a vertical bar (|).
346 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
347 that implement %f in RunScripts to pass the FileSet name.
348 kes Skip leading | when lex input comes from a pipe as suggested
349 by Michael Stapelberg <michael@stapelberg.de>.
351 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
352 Nerijus Baliunas <nerijus@users.sourceforge.net>
354 kes This patch corrects a problem where the maximum concurrent storage
355 jobs counter gets out of sync during restore jobs causing jobs to
356 'wait on max Storage jobs'. This patch fixes bug #1009.
358 kes Add new include to postgresql.c suggested by Marc Cousins so
359 that it compiles correctly with pgre version 8.3. Also fix
360 misuse of %x with pointer (should be %p).
362 kes This patch fixes bcopy so that it produces correct Volumes.
364 kes This patch eliminates spurious output to the console during a VerifyVolume
365 job that contains encrypted data. It fixes bug #1024.
367 kes This patch prevents the 'status dir' command from trying to use a scratch
368 volume and possibly moving it from one pool to another. This patch fixes
371 kes Fix --archivedir addition to configure. Replace it with
372 --with-archivedir in configure.in This fixes the regression
374 kes This patch fixes bug #1012 where the job is canceled because
375 of Max Run Time exceeded when the job has not yet started.
377 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
378 one 'part' to write. Instead of each part being stored on disk,
379 written to DVD, then deleted from disk, all parts are written to disk,
380 and only the last is written and deleted from disk.
382 kes Correct typos in disk-changer.in
384 kes This patch fixes the status command to include the formating string for
385 JS_AttrInserting. It fixes bug #1021.
386 kes This patch should fix the Mac OS X build problem on the latest
387 Darwin, where sys/types.h was not included correctly (apparently
388 due to a change in the Mac headers). The solution was to explicitly
389 ensure that it is defined for the ./configure.
390 This patch also has a rebuild of configure that includes the Debian
391 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
392 kes This patch should ensure that queued messages to the console are
393 displayed as soon as possible. It should fix bug #1007, but has been
394 reported not to work.
396 kes This patch fixes the infinite loop when trying to increase the
397 maximum number of volumes in a Pool during the add command.
398 This patch fixes bug #1008.
400 Release Version 2.2.6
402 kes Get fix for joblist bug in bat from trunk.
404 kes This patch fixes bug #1003 where putting the message output from
405 a Verify job into the catalog results in a recursive loop. The problem
406 seems to show up only with postgresql (to be verified).
408 kes Fix bug #942 where lots of emails where generated when the heartbeat
409 interval was low and Bacula wanted a different tape from the one in
412 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
413 which was updated during a restore (or a reading migration) bug #982
415 ebl Use qmake-qt4 instead of qmake when available (debian system).
417 kes Add a security warning to src/cats/make_catalog_backup.in indicating
418 that passing the password via the command line (arg 3) is insecure.
419 This responds to bug #990 (it doesn't fix it).
420 kes Apply 2.2.5-postgresql-errors.patch
421 kes Remove unneeded File table index on JobId, which is already
422 present as the first index of another multi-index.
424 kes Set default debug_level to zero. This corrects bugs #991 and #993.
425 kes Fix a crash in bat when it cannot connect to the Director for example
426 if the Director is not running.
428 kes Activate Close button on tray-monitor window. This fixes
431 kes Fix spurious warning message printed when creating a volume with
432 a LabelFormat. This fixes bug #976.
434 Release Version 2.2.5
436 kes Add JobId in place of Job name in all the Jmsg() output.
437 kes Correct the APP_DESC for the Win32 storage service (remove an e).
439 kes Add new SD despooling attributes and Dir inserting attributes
440 job status codes. This fixes bug #961.
441 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
443 kes Fix doc issue. This fixes bug #963.
444 kes Fix listing performance problems in bat. Pointed out by
446 ebl Fix replace on restore. This fixes bug #969
447 kes Fix bat code that tests for Win32. This should fix bug #968
448 kes Query 5 list wrong Vol after migration. This fixes bug #960
450 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
451 in back porting from 2.3.x
453 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
454 The details are included in the notes in this file.
456 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
457 messages; it fixes a problem opening the SQLite3 database when multiple
458 simultaneous jobs were running; it fixes a bug with certain versions of
459 MySQL where batch inserts failed because of table name character case
460 (upper/lower) differences.
461 kes Fix race condition that drops final block written to volume.
462 This happens in rare cases with multiple simultaneous jobs
463 when the Volume fills. This fixes bug #964. May be related
464 to bug #935 and possibly #903.
466 kes Fix FD->SD authorization failure, which was due to spurious
467 wakeups from a pthread_cond_timedwait(). Simply check the
468 predicate before continuing. This fixes bug #953
469 dvl Add new configuration item --archivedir
470 dvl Adjust regression tests to use tmp not /tmp. This will allow
471 multiple concurrent runs of the regression tests.
473 kes Eliminate more strerror() and replace with bstrerror().
474 kes Remove BSD getopt and replace with unrestricted IBM version.
475 kes Fix Win32 build for changed calling sequences.
477 kes Fix FD->SD authorization failure, which was due to spurious
478 wakeups from a pthread_cond_timedwait(). Simply check the
479 predicate before continuing. This fixes bug #953.
480 kes Add const char where needed (more to do).
482 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
483 kes Don't overwrite error message in check_tables_version.
485 kes Unlock batch insert tables with same calls used elsewhere.
486 kes Allow starting 59 jobs a second.
487 kes Make SD session key more random.
488 kes Add retry for SQLite opening db if it fails. Probably helps
490 kes Suppress extra error messages during batch insert failure.
492 kes Put some FD auth code on dbglvl rather than fixed.
493 kes Return insert attributes error message in db msg buffer to avoid
494 false error messages. Helps fix bug #966.
495 kes Separate batch init error messages. Probably helps fix bug #966.
496 kes If Dir gets an error during inserting attributes, cancel SD.
497 This reduces unnecessary error messages.
499 ebl Cleanup batch insert code. Probably fixes bug #965.
501 kes Turn off some code when batch insert not enabled.
502 kes Edit FD name in connect error messages.
504 kes Add code to handle tray monitor separated from Win32 FD.
505 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
507 kes Fix ANSI tape labeling. This fixes bug #954.
508 kes Increase the max block size to 4MB fixes bug #957.
509 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
510 is not properly mounted (recognized) during a poll.
511 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
512 Job that has differences reports Verify OK.
513 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
515 Release Version 2.2.4
517 kes Increase size of name string when FD making connection to SD.
520 kes Add waits to multiple exit detection code to try to force pid
521 file to always be deleted.
522 kes Restore good dev.tar.gz to rescue set appropriate binary property.
524 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
525 trying to switch drives by checking for blocking before unblocking.
527 kes Cancel storage daemon in all cases where FD reports error. This
528 should fix virtually all cases of bug #920.
530 kes Fix error message that was clobbered when Dir tells SD it does not
531 have write permission on Volume. This should fix a minor point
532 in bug #942, but not the main problem.
533 kes Add code to cancel job in SD if FD connection fails. This should
535 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
536 kes Fix migration code to get correct Volume name with multiple volumes
537 by skipping |. Fixes bug #936.
538 kes Implement patch supplied by Landon to fix bug #944 where using
539 TLS with bconsole uses 99+% of the CPU.
540 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
542 kes Move patches into patches directory.
544 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
547 ebl Using 'm' in bconsole will show messages like before,
548 and not memory usage.
550 Release Version 2.2.3
551 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
554 kes Fix bug #935, and probably also bug #903 where files were not
555 restored. MediaId was not properly set in JobMedia record after
558 kes Add ./configure search in qwt-qt4 for qwt package
559 kes Apply Martin Simmons patch that should turn off the new API usage
560 when batch insert is turned off allowing building on older
563 Release Version 2.2.2
565 ebl Detect if new PosgreSQL batch insert API is present.
566 kes Correct incorrect mempool call causing Director crash.
567 sb Update spec files for 2.2.1 release
569 Release Version 2.2.1
571 kes Update POTFILES.in
572 kes Cleanup a few underquoted AC_DEFUNs in configure
573 kes Apply patch from Martin Simmons that adds a test for va_copy to
576 kes Fix bug #921 by increasing the number of tries to create a new volume
578 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
579 can be called multiple times. Implement a version for machines
580 without va_copy() that gets a big buffer.
582 kes Integrate more portable zone offset code into bsmtp.c
583 Submitted by Attila Fülöp.
585 kes Fix bad SD->FD return status reported by
586 (James Harper) <james.harper@bendigoit.com.au>
587 ebl Fix a bug in read_close_session which return random status
588 thanks to James Harper
590 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
591 and directory names during restore of single file/directories.
592 kes Add sanity checks to .sql command when string is empty. Hopefully
593 that will resolve Dirks Director crash.
595 kes Apply patch submitted by Martin Simmons that corrects a seg fault
596 in the bsmtp chat subroutine when debug is >= 10.
598 kes Fix Director crash when running bat SQL queries.
599 kes Add David's notes on Item 8: Copy pools.
601 kes Rework projects file to be current and ready for a vote.
602 kes Enhance lex scanner error message.
604 kes Tweak LICENSE file to mention BSD code.
605 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
606 if specified on the ./configure.
607 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
608 This class is intended to allow us to open a second bsock to the
609 Director while in the restore subdialog.
611 kes Fix configure to create bat Makefile before creating dependencies.
612 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
613 kes Add a tooltip to the tray monitor.
614 dvl Set the Director's PID file before dropping privs. This fixes
617 kes Update AUTHORs file
618 kes Increase the default max concurrent jobs to 20 in FD and SD to
619 correspond with the default .conf files.
620 kes Rewrite the Win32 service routines. This eliminates the 3 copies
621 some different, of the same file created by RN when porting the
623 kes Rearrange some of the Win32 directories and the placement of the files
625 kes Set DEVELOPER flag in version.h
627 ========================================================================
628 Release Version 2.2.0
630 kes Apply a second doc patch from Marc.
631 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
632 improves the tips section that discusses how to setup multiple
635 kes Update bat README file.
636 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
637 corrects a typo in the Recycle status check in db_find_next_volume().
638 This will probably fix a number of annoying problems with multiple
640 kes Modify most of dird/msgchan.c to use bsock class calls rather than
641 bnet calls -- no functionality change.
643 kes Modify the Verify output to specify if files are missing on
644 the Volume(s) or disk. Fixes confusion in bug #916.
645 kes When more than one Volume is read in a migration job, the last
646 Volume bytes reported are from the last read volume rather than
647 the last written volume. Fixed. This fixes bug #910.
648 kes Fix display of Recycle flag after update volume=foo recycle=yes.
649 It previously printed New Recyle flag is: no. This fixes bug
652 kes Correct seg fault when switching tape drives during restore.
653 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
654 be used until after 2.2.0 release.
656 kes Remove fnmatch() in SD that permitted wild card specifications.
659 kes Fix %g in filename returned by SQL for browse tree reported by
661 kes Fix configure so that it puts config.out in the cwd rather than
663 kes Attempt to fix the locking problem reported by Eric in bug #906.
664 kes Make berrno class to leave errno unchanged after constructor call.
665 kes Make bnet_server use the heap rather than the stack to allocate
666 its socket fd pointers to avoid a crash at termination. Problem
667 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
669 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
670 and putting it in depkgs-qt along with Qt4.3.
672 kes Rework code in acquire.c that switches drives for reading when
673 the Media Type does not match. This should fix bug #906
675 ebl Fix a director segfault during job setup #907
676 kes Correct seg fault in postgresql when first operation returns no
677 rows. Fixes Dirks File browser problem seg fault with bat.
679 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
680 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
683 kes Implement PopUp YES/NO dialog for bat.
685 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
687 kes Correct RunScript to terminate job in FD on failure.
688 kes Change abort_on_error and AbortJobOnError to fail_on_error
689 and FailJobOnError in RunScripts.
690 kes Minor tweaks of code formating in RunScripts, principally to
691 avoid depassing 80 columns.
693 kes Eliminate one #ifdef Win32 in bsmtp
694 kes Implement grow tool to grow a file for testing very large databases.
695 kes Add big-vol-test to test Bacula seeking with > 5GB.
698 kes Modify find_next_volume() to return all values in Media record.
699 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
703 kes Update Release notes
705 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
706 Warning, in previous beta version, all media get from scratch keep their
709 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
710 This should fix bug #842. Made a note to look at removing the temp
711 files at the end of the install.
712 kes Add ability to mount and unmount a file device providing it is
713 marked as being removable and has the appropriate mount and unmount
714 commands defined in the Device resource. This fixes bug #830.
715 kes When applying a storage override, release all previous storage
716 definitions rather than just prepending the new storage.
717 This should prevent a good deal of confusion.
719 kes Implement ./configure search for qwt libraries.
721 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
722 Win32 FD. This should fix bug #893.
723 kes Remove an unnecessary beep in Win32 init code.
724 kes Update copyright dates in Win32 executable about boxes.
725 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
726 code with a BSD getopt.c and getopt.h.
727 kes Remove sched.h from the Win32 compat directory -- not used.
728 kes Remove the Exit menu item from the Win32 tray monitor. If you really
729 need to shut it down, do it through the services panel or the command
731 kes Remove some inappropriate Bacula FSFE copyrights.
732 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
733 kes Fix regress config non-portable test as pointed out by
734 Florian Heigl <florian.heigl@gmail.com>
735 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
736 as pointed out by Florian Heigl <florian.heigl@gmail.com>
738 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
739 Reported by Frank Sweetser.
743 kes Fix client-only build.
744 kes Integrate client-only fixes for bsys (initgroups) and conio from
745 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
746 kes Make arguments to get_scratch_volume() in same order as other
748 kes Rework the prune_volumes() subroutine so that after purging and
749 no volume found in desired pool, it will check for a scratch
750 volume. This prevents recycling the whole scratch pool.
751 kes Add code to status storage to print boffset_t (largefile support).
753 kes Move qwt (Graphics libarary for Qt4) to depkgs.
754 kes You now need a --with-qwt=<dir> to be able to build bat.
755 kes Update src/win32/cats/bacula_cats.def to include the new
756 db_get_query_dbids() call on Win32.
758 kes Correct a problem when selecting a scratch volume and moving
759 it to another pool that lost some columns.
760 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
761 kes Enhance Autochanger error messages to include Volume and device name.
762 kes Rework prune_volumes() code to take account of InChanger flag,
763 and to handle recycling volumes going to the Scratch pool and
764 current pool because the RecyclePool directive.
765 kes Implement a better and more efficient db_get_query_dbids() to
766 handle creating and passing back a list of DBIds.
770 kes Start work on new more efficient DBId subroutine. First use
771 will be for recycling volume to Scratch inchanger.
772 kes Increase number of JobIds in pruning from 1000 to 10000.
773 This to be replaced by above routine.
774 kes Begin implementation of building Qt4 on Win32.
775 kes Correct typo in fix I added for bad TLS shutdown.
776 kes Pull 2.0.3 patches into patches directory.
777 kes Update Release notes. Include qt-console in line count.
778 kes Update Projects file.
780 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
781 bug in migration code where a job that spanned two volumes
784 kes Implement new BST_DESPOOLING blocked state. Change from locking
785 during despooling in SD to blocking. This means that other threads
786 can work with the device structure, in particular the reservations
787 system while despooling.
789 kes Fix return in reservation message queue that missed clearing
790 the jcr lock (implemented 26Jun07 below).
791 kes Rename a number of dev methods to make locking function names
793 kes Document locking in lock.c. Move lock structures to new file
796 kes Move reservations message lock to lock jcr only this
798 kes Move main SD locking code into lock.c (new file).
799 kes Update Win32 build to include lock.c
803 kes Dirk committed the qwt library code for drawing graphs in bat.
804 kes Tweak install of qwt so that it is integrated with ./configure.
806 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
807 out by Eric (my typo).
808 ebl Fix configure.in to get batch mode enable
809 kes Return correct string from authenticate.cpp in bat when connecting
811 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
812 spurious line drops when using TLS.
813 kes Do not file reparse points when restoring a file that already
816 kes Implement Windows reparse points -- similar to directories, but
817 we do not descend into it. This is a first cut. They seem to
818 be backed up, but restore is not yet tested.
819 kes Remove restore_blocking in tls code when shutting a socket to leave
820 it in blocking mode. Hopefully this will fix the encryption bug
821 reported by Frank Sweetser.
822 kes When opening a file for backup, tell the OS that we are going to
823 read it sequentially -- optimization.
824 kes Change variable names in authenticate_director() to not conflict
825 with member names in bat. Caused great confusion with compiler,
828 kes Queue openssl error messages in case of comm problem.
829 kes Do shutdown() call if socket terminated.
830 kes Remove some duplicated code in tls.c
831 kes Move more of the bsock member variables into private and access
833 kes Add Frank Sweetser's tls-test to the regression suite.
835 kes Add Swedish sv.po file
837 kes Don't print clock skew message in FD if less than 3 seconds diff.
838 kes Add a bit of VSS info to status client.
839 kes Implement a first cut of Vista VSS, using Win2003 code.
843 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
844 loaded tape but uses first drive).
845 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
846 This was indeed a Win32 issue.
848 kes Simplify search of autochanger for in-use Volume.
849 kes Fix exit condition of check for in-use volume. kes Remove
850 inappropriate my_postgresql_free_result() in db_close()
852 kes Fix bad return in FD when encryption signature not found.
853 Probably caused a crash.
854 kes Inhibit missing encryption signature error messages for
855 file types where no signature computed.
856 kes Correct inverted check on autochanger in reservation system.
857 kes Tweak debug code in autochanger reservation.
859 kes Add some additional locking in the cats directory in subroutines
860 that modify packet variables called from batch insert.
861 kes Rework how dcrs are allocated. new_dcr() can now be called
862 with an existing pointer, and it will simply clean it up.
863 This allows the reservation system to test various different
864 devices, and will permit easy device changes.
865 kes A bunch of changes all over to handle new new_dcr() calling
867 kes Work more on the Volume management in the SD. Remember Volumes
868 for tape drives and for autochangers (even virtual disk changers).
869 kes When looking at the Volume list to reserve a drive, handle
870 autochanger names correctly by interating through the changer
871 devices. Also call the Director to see if a Volume is suitable
873 kes Fix some bugs in bscan. Make sure all media records are written.
874 Make sure that valid JobMedia records are written for disk files.
875 Previously they were completely wrong.
876 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
877 that the URLs don't change and so that the developers will all
878 work off the same copy. Rebuild from scrach.
879 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
883 kes Fix seg fault in FD from incorrect digest size.
884 kes Fix argument to non-OpenSSL crypto.c subroutine.
888 kes Remove a few malloc()s from the encryption code.
889 kes Use the class calls to bsock in filed/backup.c and restore.c in
890 place of the old bnet_xxx code.
891 kes Implement code that does an on the fly calculation of the
892 signing digest during restore of encrypted files. It makes
893 a best guess at the algorithm, and if it is not correct, will
894 then revert to the old code which reads the file after it is
896 kes Implement at least one missing crypto stream in stream_to_ascii()
897 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
898 #877 where a reload with bad syntax causes Dir to exit.
900 Cut: 2.1.14 beta (not released)
902 kes Do not free a volume on a tape drive until another volume is
903 mounted and read, or the autochanger unloads the volume.
904 This should help the SD re-use volumes that are already mounted,
905 and should fix bug #886.
906 kes Apply patch from user brettedgar that allows gnome2-console include
907 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
908 kes Apply patch from Lucien Weller that fixes day of week calculation
909 because of DST flag problem. Fixes bug #887.
911 kes Move find_next_appendable_volume() to after acquiring a valid device
912 in reserve.c. This fixes bug #864 -- confirmed by reporter.
914 kes Unable to reproduce bug 872. However added additional testing for
916 kes Bug #874 resolved by documenting SQLite limitations.
917 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
918 kes Bug #881 resolved by removing typo in mtx-changer script.
919 kes Made Frank Sweetser's wiki the official Bacula wiki with his
920 approval. Added a link to the wiki on the web page, and implemented
921 a backup from http://paramount.ind.wpi.edu
923 kes Fix update allfrompool to pass pool name.
925 kes Convert to pure GPL v2 license.
926 kes Fix sscanf problems reported by Peter Buschman that caused
927 a bus error on Solaris.
928 kes Rework (simplify) the select prompt in bat.
929 kes Move get_jobid_from_tid() into lib and create a
931 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
932 should definitely fix the problem of lost error messages in the
934 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
935 kes Eliminate tcpd.h from the project. Enclose the #include from the
936 library with extern C ...
937 kes Add print of signal name when a signal is trapped.
941 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
943 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
944 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
945 makes SQLit3 run 30 times faster, though a bit less safe.
946 kes Implement --with-batch-insert in configure and detection of thread
947 safe libraries. It is on by default, but turned off if no thread
948 safe library (e.g. SQLite 2) is available.
950 kes Fix Bacula PostgreSQL buffer overruns.
951 kes Do better checking for NULL results returned from PostgreSQL;
952 implement retry for failed queries; clear results buffer after
953 failed query. Hopefully this will correct the PostgreSQL failures.
955 kes Implement algorithm to handle only one appendable volume with
956 Prefer Mounted Volumes = no.
957 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
958 returned from a query.
959 kes Make volume lock recursive.
960 kes Implement an additional volume reservation algorithm that
961 starts by considering all reserved volumes then uses the
962 old brute force algorithm of searching the resources to
963 find a suitable device.
964 kes Add new reservations debug code and refine the old code.
965 kes Update the win32/dll/bacula.defs file.
967 kes Tweak reservations algorithm to permit a few more cases, i.e.
968 volume reserved, but on different drive, ...
969 kes Enhance SD status to include Pool and Media Type for drive in a
970 more readable format (a bit longer).
971 kes Fix PostgreSQL double free.
973 kes Minor refactoring of restore decryption code.
974 kes Add code to smartall.c to detect double free of a buffer.
976 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
977 so that bsmtp will create a correct email address (mailbox only).
978 kes Modify 'memory' command so that the buffers are listed as 'In use'
979 to avoid confusion with Orphaned buffers.
980 kes I reworked the OpenSSL include/lib flags to be handled in
981 the standard Bacula way, which should fix bug #863 concerning
982 non-standard OpenSSL libraries.
984 kes Implement Help Browser window for bat.
985 kes Fix reload bug that reset StorageId to zero.
987 kes Fix TLS #ifdefing when TLS turned off.
988 kes Ensure that when labelling a tape with Slot=0 that InChanger
990 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
992 kes Add StartTime to final uar_sel_jobid_temp query so that we can
993 add DISTINCT (required by PostgreSQL).
994 kes Implement BSOCK authenticate_director() method. Eventually will
995 authenicate all daemons.
996 kes Move several more functions into the BSOCK class.
998 kes Add code to tell the OS that we no longer need a cached
999 file that we were reading. In findlib/bfile.c. Also,
1000 only cache files that we are reading. Thanks to
1001 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1002 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1003 kes Implement script to automatically generate cats and dll .def
1004 files for Win32 dll.
1005 kes Update README.mingw32 to include new .def file generation.
1006 kes Correct typo in UTF-8 error message as reported by:
1007 jhernandez <julianhernandez@gmail.com>
1008 kes Add additional sm_check() code on debug level 1.
1009 kes Set default debug level to 1.
1010 kes Trap SIGABRT in attempt to get traceback.
1012 kes Reduce bat connect timeout from 30 to 15 seconds.
1013 kes More restructuring and implementing BSOCK class in place of
1015 kes Remove a few unnecessary malloc() tests in crypto code.
1016 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1017 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1018 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1020 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1022 kes Fix Verify InitCatalog. The attributes were not pointing to the
1023 correct saved location.
1024 kes Implement message callback so that GUI is sure to get all
1025 daemon messages. Currently displayed in a dialog in bat.
1026 kes Ignore SIGUSR2 (Bacula timer) in bat.
1027 kes Apply regress patch from bug #859 to allow regress to work
1028 with Solaris compiler.
1030 kes Begin adding TLS support to bat.
1031 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1032 clean up lex.c and make it more readable.
1034 kes Move more bnet functions into the BSOCK class.
1035 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1036 kes Complete change of berrno strerror() method to bstrerror()
1038 Release: 2.1.10 beta
1040 kes Cleanup incorrect email addresses in bsmtp.
1041 kes Make bat display initial messages rather than discard them.
1043 kes First cut of adding .mod to the run command.
1044 kes Implement auto display of messages in bat.
1045 kes Enhanced preferences to allow all Bacula output to be
1048 kes Try to make bsmtp date routines more generic.
1049 kes Fixed bug #856 autochanger documentation.
1050 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1051 kes Add new cats entry point so Win32 builds.
1053 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1055 kes Do better checking for the MySQL 64 bit libraries looking for both
1056 .a and .so libraries.
1057 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1058 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1059 kes Require the thread safe version of MySQL during configure. Thanks
1060 to Andre Noll for pointing this out.
1061 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1062 continuing in migration code.
1063 kes Apply implementation of tray-monitor font derived from gnome-console
1064 submitted by Andreas Piesk <a.piesk@gmx.net>
1066 kes Eliminate important memory loss in SQLite
1067 kes Fixed the batch insert MySQL thread specific data that was not
1068 being freed. See cats/mysql.c:db_thread_cleanup().
1069 kes Fix restore before command.
1070 kes Convert old hdr.name to name() in a few places.
1071 kes Implement update jobid command.
1072 kes Return all time_t dates in db_get_job_record()
1073 kes Stop watchdog in SD earlier.
1074 kes Put Pool just after Storage in please mount message.
1075 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1078 kes Update the po files.
1079 kes Fix Verify InitCatalog by making it cache attributes.
1081 kes Change name bacula-bat to bat for man 1 page to correspond to
1083 kes Check for client and store NULL pointers in status command. This
1085 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1086 kes Fix sign extended editing of %p.
1087 kes Clean out a little old #ifdefing in cats/mysql.c
1089 kes If time diff between DIR and FD is more than 600 seconds convert
1090 INFO message to WARNING.
1091 kes Implement heap size display in status for all daemons.
1092 kes Attempt to fix MySQL db open memory loss (not successfull).
1093 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1094 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1095 Query. This looks like a MySQL but but by doing extra releases,
1096 the memory goes away. This should fix bug #847.
1098 kes When backup fails, cancel SD before waiting for sd termination.
1099 kes If SD is waiting for FD to connect during cancel, wake up the
1101 kes Fix fsf code so that errno is correctly reported.
1102 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1104 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1105 so that Bacula doesn't later stumble into a seg fault.
1106 kes Use the term Restore Client in the restore Job report.
1107 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1108 the original job's FileSetId.
1109 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1110 spooling in migration jobs. Not yet tested.
1111 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1112 reading conf file from a pipe. However, do it with open_bpipe()
1113 rather than popen. Not yet tested.
1115 kes Fix an ugly bug where the VolCatBytes were getting updated
1117 kes Implement bconsole memory command that prints current memory
1118 usage, plus smartalloc dump.
1119 kes Clarify some error messages in backup, admin, and migrate.
1120 kes Shrink label dialog to smaller size.
1121 kes Invert Cancel OK buttons on restore to be OK Cancel.
1122 kes More strerror() to bstrerror() conversions.
1124 kes Start implementing bstrerror() in place of strerror().
1125 kes Stripping path -- seems to work.
1127 kes Prevent door and port files from being restored (mostly
1129 kes Free an unreleased buffer in compat code.
1130 kes Change console Job name from *Console* to -Console- to eliminate
1131 Win32 filename problems. Put Win32 path separator when creating
1132 Console file. This fixes bug #846.
1133 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1135 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1137 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1138 to force Win32 error message.
1140 kes First cut strip path. The data should be passed to the FD,
1141 but nothing is done with it yet.
1142 kes Enhance the digest and signature routines in the crypto
1143 library to accept a JCR and to use it to print error messages
1144 so that they will go in the Job report rather than the daemon's
1146 kes Simplify some of the verify signature code.
1147 kes Simplify a few of the alternative returns in the signature
1150 ebl Use only POSIX regex instead of GNU regex in breg.c for
1151 File relocation. It fix broken freebsd compilation.
1152 kes Convert all other Dir files to use new ua class message
1154 kes Tentative fix for missing digest signature in bug 807.
1155 kes Correct handle problem in new win32_ftruncate routine.
1156 kes Convert ua_purge.c and ua_update.c to use new ua class
1157 message routines for bat.
1159 kes Correct incorrect installation of LICENSE in Win32 installer.
1160 kes Display LICENSE at the beginning of the Win32 install.
1161 kes Attempt to correct the need for the png files to be installed
1163 kes Reapply my bat.conf install script in qt-console. I think I
1164 editted bat.pro instead of bat.pro.in and it was lost.
1165 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1166 the /var/lock/subsys for subsysdir. Also corrects typos in the
1169 kes First cut update job.
1170 kes Correct configure to include qmake of src/qt-console directory.
1172 kes Make restore job yes/mod/no print in one command so GUI works.
1173 kes First cut implementing backup and restore client.
1174 kes Correct editing in Verify output that caused a seg fault.
1176 kes Insure that bat.conf is not overwritten during installation.
1177 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1178 while I was implementing migration in March 2006 !
1180 ebl Cleanup file relocation, using char *RegexWhere instead of
1181 char *where + bool where_use_regexp
1182 kes Update some manpages and add bat manpage.
1183 kes Make a first cut at converting bacula.spec.in for bwx-console
1185 kes Apply patch from John Goerzen to add hostname as fourth argument
1186 to make_catalog_backup script.
1187 kes Fix typos I introduced into bsmtp.c
1188 kes Make pm_strxxx() routines handle input of NULL pointer. This
1189 is to protect from NULL pointers returned from SQL databases.
1190 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1191 kes Add more debug to FIFO code -- fix fifo regression test.
1193 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1194 kes Add thread timer to bnet_connect() to break from OS if wait time
1197 kes Update Win32 build to include new files, new symbols, and
1199 kes Implement socket level heartbeat (tcp_keepidle)
1200 ebl Commit File relocation patch
1201 kes Make bat have 'make install' target.
1202 kes Warn during install if old gnome-console binary found.
1203 kes Warn during install if old wx-console binary found.
1204 kes Add -8 option to bsmtp command line to add content type utf-8.
1205 Fixes bug #809. (Character coding problem in bsmtp).
1206 kes If < is found in target (from, to, cc) then do not enclose the
1207 target in < > in bsmtp. Fixes bug #772 (malformed address).
1208 kes When printing certain items in dbcheck, stop after 300000.
1209 Fixes bug #822. (dbcheck loops).
1210 kes Incorrect status in Dir after waiting for mount with poll set.
1213 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1215 kes Print waiting to reserve a device every 5 mins.
1217 kes Don't call close_part in label.c if tape and relabel.
1218 kes Don't free volume if busy in close() -- should help with
1220 ebl Fix #824 RunScript bug (After script could be execute twice)
1221 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1222 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1223 Add a regression script to test RunScript
1225 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1228 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1229 deprecated. No additional bugs will be fixed, and they will be dropped
1230 in a future release (probably 2.4.0).
1231 kes Change name of wx-console to bwx-console to make it more Bacula
1233 kes Change the name of gnome-console to bgnome-console to make it
1236 kes Some time in March, a Feature Request with patch from Jorj Bauer
1237 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1239 The ability for the director to validate a Client (FD) CN against
1240 an arbitrary set of patterns rather than the hostname, with
1241 A new 'TLS Allowed CN' set of directives which are implemented
1242 in the Client resource. Then pattern matching is used in place
1243 of hostname matching against the Certificate's CN. As an example, we
1244 have certificates which (a) use a local CA, and (b) have a CN of the
1246 kes Add new/changed entry points to Win32 build
1247 kes Create unaccepted-projects for projects that are not accepted.
1248 kes Simplify locking in the reservations system.
1249 kes Add more debug code in reservations.
1250 kes Make sure error condition on reserving a volume is handled correctly.
1251 kes Correct handling of volume_in_use.
1252 kes Correct handling of initializing a device.
1253 kes Move handling of broadcasting releasing a device into release_device().
1254 kes Correct attaching dcr to dev so that it is only done if device
1255 is properly initiated.
1257 kes Locking debug level tweaks in SD.
1258 kes Tweak new Volume code.
1260 kes Add exec external-command [wait-seconds] to bconsole. This
1261 executes the external-command. Note! normally external-command
1262 should be enclosed in double quotes.
1263 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1264 it should normally be off in a production system.
1266 kes Implement die command for SD so that we can force it to dump.
1267 kes Implement SD lock debug code.
1268 kes Implement new algorithm for keeping Volume list in SD. It
1269 is now owned by the device.
1271 kes Implement new code for freeing in use volumes that should
1272 resolve if not all, some of the problems of multiple drive
1273 tape conflicts described in bug 801.
1275 kes Fix gui/bacula-web/images files in svn.
1276 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1278 ebl Fix a bug in batch mode (in string escape)
1279 kes Correct migration prune SQL typo that crept in in a
1280 recent 2.1.x change.
1282 kes Move bnet_despool() into class in bsock.c
1283 kes Modify job report to include director name and Build OS.
1284 kes Move drop root privilege and check_catalog() before fork.
1285 kes Add update database scripts (version 9 to 10) to updatedb directory.
1287 ebl Check size and age of each file after its backup to see if
1288 it has changed during backup, if 'checkfilechanges' is set.
1289 The FD will do an extra check (stat(2)) after
1290 each file backup. mtime, ctime and size are compared with
1291 'before backup' information. If time or size mismatch, an
1292 error message will be generated. You must upgrade FD to use it.
1294 kes Make database name and user configurable
1295 --with-db-name=xxx --with-db-user=xxx
1296 kes Add back database type to message.c for debugging.
1298 kes Implement dir_sql() which issues an SQL query.
1299 kes Modify bat medialist to use dir_sql() and do some minor C++
1300 formatting as well as eliminating a number of pointers, simplifing
1303 kes Fix some of the mtx-changer grep commands for tape label readers.
1304 kes Convert a number of bsendmsg into the appropriate send/warning/error
1305 message class calls.
1306 kes Suppress the using database message in the .sql command.
1307 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1309 kes Add context menu for floating a window.
1310 kes Some minor cleanup and name changes in qt-console
1311 kes Add doing mt setblk 0 in Win32 mtx-changer.
1312 kes Apply Martin's bug fix to move definition of ENODATA for
1314 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1315 sqlite2 and sqlite3.
1317 kes More pruning cleanup.
1318 kes Turn on wait_for_drive by default in mtx-changer.
1319 kes Turn on Batch insert code by default as it now passes regression.
1320 kes Add ./configure --enable-bat to enable building of Bat.
1321 No install yet though.
1323 kes Implement a new .sql command for bat.
1324 kes Implement code to turn off pruning in obtaining the next volume.
1325 Pruning is turned off for the status dir command, but turned on
1326 for SD requests and for the list nextvolume command.
1328 kes Correct Qmsg() that was not updated correctly when committing a
1329 previous change (probably the recent TLS patch).
1331 kes Write new subroutine is_volume_purged() that explicitly checks
1332 if the Volume is purged, and if so marks it as such. This should
1333 resolve problems reported about needing to mount twice to recycle
1335 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1336 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1337 amount of duplicated code.
1338 kes Do volume pruning only for the Media Type desired (reduces pruning time
1339 if multiple Media Types are in the same pool).
1340 kes Implement more detailed info in the Job report for the Bacula version
1342 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1344 ebl Add bbatch tool to bench database and insert mode.
1345 Fix sql quote stuff in batch mode
1346 Fix sql stuff for mysql
1348 kes Correct problems with am/pm scheduling. Fixes bug #808.
1349 kes Implement new prunning code that prunes up to 1000 jobs at
1350 the same time. The same technique can be applied to a number
1351 of other prune/purge subroutines.
1352 kes Add an insanity check when starting a new tape job to ensure
1353 that the tape position has not been changed. If so fail the
1355 kes Fix Win32 build for dlls to add the folllowing:
1356 src/lib/bsock.c -- new file with new entry points
1357 src/lib/dlist.c -- new entry points
1358 src/cats/sql_create.c -- new entry point
1359 src/cats/sql_cmds.c -- new DATA item exported
1361 ebl batch mode cleanup bscan-test is ok now.
1362 kes Implement SD code to check length of disk volume before appending.
1364 kes Correct return status on db_batch... routines.
1365 kes Add call to db_write_batch_file_records() to migration code.
1366 ebl Fix AfterJob timing
1367 kes Move the checking of the database in initializion of the Director
1368 to after we drop privileges. This avoids the need for both root
1369 and bacula access to the DB.
1370 kes Correct a misplaced variable definition in src/filed/backup.c
1371 kes Correct how the new batch insert db_create_attributes_record()
1372 uses the arguments. Caused a seg fault in bscan.
1373 kes Implement lock() and unlock() methods in DEVICE class.
1374 Implement block() and set_block(xx) methods in DEVICE class.
1375 kes Modify bnet_connect() so that it uses time() to check for the
1376 wait time expiring (on some OSes, some system calls may not
1377 return immediately).
1378 kes Modify Verify to obtain the previous JobId when it is actually
1379 running rather than at schedule time (as it was in 1.38.x).
1380 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1382 kes When checking pid in pid file, continue running if the pid is
1383 the same as ours. This occurs on IRIX after a system crash.
1386 kes Extend new GUI API.
1387 kes Make the ua structure a class, and implement send_msg(),
1388 error_msg(), warning_msg(), and info_msg().
1390 kes Apply fix from for building wx-console on the Mac from
1392 kes Implement new select mechanism for GUI programs.
1393 kes Reorganize initialization of stackedWidgets in bat.
1395 kes Add updated nagios plugin supplied by Christian Masopust.
1397 kes More bat implementation.
1398 kes File migrate bug with Pool Occupancy using mediaid instead
1399 of jobids. Fixes bug #795.
1400 kes Fix orphaned buffers in filed backup and verify due to
1401 crypto buffers not freed during errors. Fixes bug #789.
1402 kes Extend new GUI api code to tree commands.
1403 kes Ensure that tree and dot commands check console ACLs.
1404 kes Permit marking directory with trailing slash.
1405 kes Allow 20 console connections (instead of only 10).
1407 kes Add smartctl call to bacula-sd.conf as an example of getting
1410 kes Modify jobq.c to let simultaneous restore jobs run. This may
1411 cause them to fail if they cannot get a drive.
1412 kes Add Client Connect Wait to Storage daemon to permit users to
1413 modify the time the SD waits for a FD connection.
1415 kes Correct virtual changer check which was backwards. This caused
1416 volumes to be unloaded into slots already occupied.
1418 kes Apply Command ACL filter to JobId list in restore command.
1419 kes Correct typeo in var.c patch.
1421 kes Don't let Bacula prune File or Job records for the current Job.
1422 kes Fix variable substitution pad + inc bug reported (with patch)
1425 kes Correct SQLite log table index as reported by Luca Berra.
1427 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1429 kes Begin implementing new comm signals for API.
1430 kes Fix a few places in lib/message.c where the open fd may
1432 kes Continue implementing lib/bsock.c (real class). Make jcr,
1433 who, host, and port private. There are new methods to access
1434 them for non-class use. This required touching a number of files.
1436 kes Add LANG=C to autoconf/randpass so it works with languages other
1437 than English. Fixes bug #788.
1439 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1441 You will not be able to generate Include/Exclude list any more.
1442 It will be fixed soon.
1443 If you want to use this, you can apply
1444 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1446 kes Restore of sockets created false error messages because Bacula
1447 no longer restores sockets, but the code was still trying to
1448 set the attributes on a non-existent file. Reported by a user.
1449 ebl finish RecyclePool feature
1450 Media will takes Pool.RecyclePool
1451 when moving from Scratch to a Pool or when user will do
1452 update volume=xxx frompool
1453 To use it, add RecyclePool = aPool to your Pool resource
1456 RecyclePool = Scratch
1460 kes Expand new BSOCK class adding signal() and new BNET signals.
1461 kes Begin enhancing the dot commands adding a new API function
1462 that returns more information and will make it easier
1463 to interface to the Director from a program.
1465 kes Make DEVICE fd private. Its new name is m_fd, and can be
1466 obtained with dev->fd() outside the class. This is the
1467 first of many DEVICE members to be made private.
1468 kes Implement Michael Renner's idea on having a virtual disk
1469 changer. I made some minor modifications (e.g. I did not
1470 implement the Virtual Changer directive, but simply set
1471 the Changer Command to an empty string.
1473 kes Implement a BSOCK send() method that writes the whole record
1474 in a single write() request rather than in two.
1475 ebl add update volume=xxx recyclepool=yyyy
1476 volume takes recyclepool from pool when using update volume=xxx from pool
1478 kes Fix encryption deblocking bug, which caused some restored files
1479 to be truncated. This fixes bug #763.
1480 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1481 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1483 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1484 ebl Use btime_t instead of uint64_t in media patch.
1486 kes Optimize the use of the database a bit in the Status dir command.
1487 Only open it when needed, ensure that if any previous database
1488 was opened, it is closed.
1490 kes Correct VolCatBytes bug from media patch.
1491 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1492 in the case of orphaned records.
1493 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1494 and File records in 300K chunks to be more efficient. This
1495 idea came from Juan Luis Frances (if I remember right).
1496 kes Apply Eric's scratch patch that moves a purged Volume to
1497 the RecyclePool. Question: how is RecyclePool set? what
1498 happens to the ScratchPool?
1499 kes Apply Eric's media patch that collects read/write media
1500 times as well as byte counts. This patch requires a
1501 simultaneous upgrade of the DIR and SD. Note, there
1502 should be some way to turn off timing. I'm not sure
1503 times are in Bacula units.
1504 kes Apply Eric's batch-insert patch.
1506 kes Update projects list.
1508 kes Implement Include/Exclude file lists in FD as dlists using
1509 the new dlistString class. This permits efficiently having
1510 large include/exclude lists and completes project Item 25.
1511 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1512 console is authorized to cancel the job. This fixes bug
1514 kes Modify SD so that the VolCatJobs medium record is updated
1515 at the beginning of a Job rather than the end. This
1516 fixes bug #775 where exceeding MaxVolJobs caused jobs
1518 kes Added a mutex around getting and setting Volume information
1519 so that multiple simultaneous jobs will single thread.
1521 Switch to using Subversion
1522 kes Remove src/pygtk-console/ from configure
1524 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1525 plus the entrypoints.
1526 kes Apply patch supplied that corrects debug print
1527 in canceling jobs for max run time. Supplied as
1528 part of bug #621, which was previously fixed.
1530 kes Test on job_canceled() and sd_msg_thread_done inside
1531 loop starting the message thread to avoid a race condition.
1533 kes Remove rl_catch_signal from console.c as it conflicted
1534 with the header definition. Fixes bug #765.
1535 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1537 kes Clarify some stored/acquire messages to indicate if the
1538 problem is with read or append.
1540 kes Fix memory leak with storage ids in cats/sql_get.c
1541 kes Terminate watchdog earlier to avoid reference to released
1542 memory -- reported by Jason Austin.
1543 kes Move closing the database from jobq.c to the director daemon
1544 termination routine. This fixes memory leaks for shadow jobs
1545 (i.e. migration jobs).
1546 kes Free up the unique jobid chain items in migrate.c. This fixes
1547 a memory leak problem.
1548 kes Convert some ugly looking for statements to use foreach_alist
1549 in findlib/find.c. This will facilitate converting the structures
1550 to use dlist (for large include/exclude lists).
1551 kes Fix a bug in the btree.c and btree.h routines, then rename them
1552 rblist and add them to be built in src/lib. Include some new
1553 methods written by Rudolf Cejka that make the code more readable
1554 (hides some of the ugly casting).
1555 kes Add set_next() and set_prev() methods which make the code much more
1556 readable. Also add a new dlistString class that facilitates storing
1557 strings in dlists. To be used in the large include/exclude lists.
1558 kes Make some trivial modifications to lib/tree.h that use rblist
1559 rather than dlist for storing the tree links. This was suggested
1560 by Rudolf Cejka. The result of this is that the restore tree now
1561 uses red-black binary trees rather than simple linked lists. This
1562 should give rather dramatic speed improvements for directories
1563 contining large numbers of directories/files (more than 10000).
1565 kes Fix maxruntime bug #621.
1567 ebl Implement the include JobID in spool file name project.
1568 kes Reorder projects file in order determined by Jan 2007 vote.
1569 kes Implement item #12 on project list -- quick release of FD by
1571 kes Fix open of SQLite3 db where user does not have write permission
1572 so that DIR does not crash. Fixes bug #761.
1574 kes Add back missing @ in Win32 Makefile.
1575 kes Change 'Device not configured to autolabel' from INFO
1577 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1578 which should restart an indefinite # of times.
1579 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1580 other DIR specifications.
1582 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1583 Fix path quoting in SQLite scripts.
1584 Fix problems with SHGetFolderPath.
1586 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1588 kes Fix Job restart on error bug that promotes an Inc to a Full
1589 backup. This should fix bug #755.
1590 kes Add qt-console and first cut of code.
1594 kes Fix Bacula->Documentation link on Win32 to point to index.html
1595 instead of bacula.html. Fixed bug #750.
1596 kes Return JobId in db_get_job_record() when JobId==0. This should
1598 kes Do not release source pointers when restarting a failed job.
1600 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1601 This *should* fix bug #747.
1602 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1605 kes Modify USTORE constructor to set an empty store_source string,
1606 and don't copy the store_source string in a cancel. Hopefully
1607 this will fix Arno's seg fault, bug #744.
1608 kes Add back code to disable conio in configure. Fixes bug #743.
1609 kes Correct the Options scanner in the FD to correctly handle
1610 SHA1 option, which was eating the next option. Reported by
1612 kes Add code to indicate when the SD is spooling, spool wait, and
1613 despooling as requested by Alan Brown.
1615 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob