1 Technical notes on version 2.4
5 Release Beta version 2.4.1-b2
7 kes Use Qmsg() in job.c watchdog callback.
9 kes Release main control rwlock if ABORTing.
10 kes Make watchdog connect timeout queue messages rather than sending
11 directly to avoid lock conflicts with the real thread.
12 kes Remove const char that causes problems with Python, which has
13 older 'incorrect' headers.
14 kes Add const char in dbd.c to avoid compiler warnings.
16 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
17 mt. This fixes bug #1116.
18 kes Fix failure of 2drive-concurrent-test. Always read label;
19 clear_unload() only after drive is defined in acquire_for_read().
21 Release Beta version 2.4.1-b1
23 kes Back out bad src/lib/base64.c change.
25 kes Generally clean up the manual tape loading code. The main
26 conceptial change is that when a volume is marked to be unloaded,
27 its volume name is retained, and it is only marked as unloaded
28 when either the autoloader says it is unloaded or another tape
29 is read on that drive.
31 kes Fix a recycling problem with two autochangers reported in bug
32 #1106. This may also (unlikely) fix a second recycling bug as
34 kes Fix a SD lock volumes deadlock problem reported in bug #1100.
36 kes Fix format problem in bscan output reported in bug #1105.
38 kes Copy more data when restarting a job so that run
39 overrides are kept. This should fix bug #1094.
40 kes Backport updates to jobq.c where possible.
42 kes Fix bug where SD did not ask operator if the device could not
43 be opened. Reported by Eric.
45 kes Add dbuser to DIR conf file (replaces user).
46 kes Add --with-db-password to ./configure
47 kes Fix regress to handle db_password.
48 kes Fix a couple of pedantic compiler warnings.
49 ebl Fix bug when starting a restore on a storage that doesn't
50 have the requested MediaType.
52 kes More work on word alignments -- eliminate all ints from
53 the configuration routines.
55 kes Fix bug reported by Scott Barninger where the bacula script
56 refers to scripts in the wrong directory. Needed to meet the
57 requirements of recent FHS location changes.
58 kes Fix word alignment problem on non-Intel 64 bit machines
59 such as Solaris. This should fix bug #1097 -- bus error in SD.
61 kes Add missing win32/patches/wxWidgets.patch to 2.4 repository.
65 kes Update version to reflect the magnitude of the SD changes.
67 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
70 kes Add create_postgresql_database.sql to Win32 installer. Should
71 fix problem reported by Juilio Monteiro.
72 kes Get correct slot when auto unloading a device. This fixes bug
75 kes Fix multiple media restore.
76 kes Make DEVICE Slot private and access it via a method.
77 Allows better control over when it is set and cleared.
78 kes Fix possible seg fault if SQL error.
80 kes Add debug code to SD.
81 kes Fix renaming a Volume, which used the wrong Volume name.
83 kes If operator has rewind tape, print warning, release tape and
84 try once more. If tape is positioned somewhere, something went
85 wrong, so mark the tape in error and try once more. Previously
86 this error was fatal, now it produces an error message.
87 kes Ensure correct volume name displayed during restore
88 kes Ensure that Volume is mounted for restore.
90 kes Fix a few more Coverity reported problems.
92 Beta Release Version 2.2.10-b4
94 kes Enhance a couple of SD debug messages.
95 kes Tweak unload flag setting and ensure it is set during swap.
97 ebl Fix #1091 about bad output in estimate command.
99 kes Modify autochanger locking to attempt to avoid race
101 kes Make sure device not busy before doing label command.
102 kes Display open() errors except when polling. Previously too
103 many were suppressed. This should fix bug #1070.
104 kes Fix Win32 reparse points. Bacula will not recurse into any
105 reparse point directory, including mount points, unless the
106 directory is explicitly mentioned at the top level (same as
107 with Unix). A file that is linked to another file will be
108 backed up -- much as Unix does for hardlinked files.
109 This fixes bug #1041.
111 kes Remove double quotes from ChangeLog and ReleaseNotes
112 kes Remove StorageId test when pruning and recycling (Eric's changes).
113 kes Remove old form of locking when getting volumes -- causes deadlock.
115 kes Fix buffer overruns detected by Coverity.
117 Beta Release Version 2.2.10-b3
119 kes Tweak joblog display.
121 kes Implement --without-qwt
122 kes Fix layout of restore tree dialog
123 kes Add configure bat QWT libraries, so that bat can be built
124 with or without the QWT libaries.
126 kes Apply batfix bat cleanup patch from Riccardo.
127 kes Make sure we unload the right slot when swapping.
129 kes Improve SD reserve debug code.
130 kes Testing an improvement to free up volumes no longer in use.
132 Beta Release Version 2.2.10-b2
135 kes Rework SD acquire for read to handle autochanger Volume
137 kes Implement regression that explicitly tests swapping a Volume
138 from one drive to another.
139 kes Enhance disk-changer to detect most error conditions.
140 kes Fix SD code so that it properly swaps a Volume between drives.
141 This fixes bug #1083.
143 kes Prevent a Volume that is being swapped from being freed from
144 the volume list. This will most likely fix, at least partially,
146 kes Fix strippath so that it does not get a buffer overrun and crash FD.
147 This fixes bug #1078.
148 kes Make inability to change owner/group when creating a dir only a
149 warning rather than an error.
151 ebl Fix SQL query in migration code
153 kes Force unload of volume when wrong volume mounted in SD.
155 kes Fix bat seg fault at termination.
156 kes Add Bacula generated version to bat about box.
158 Beta Release Version 2.2.10-b1
160 kes Permit multiple simultaneous restores -- experiment.
162 kes Backport development stream SD reservation system changes.
165 kes Move final volume swapping code to DCR method and
166 call it from acquire_for_read().
167 kes When wrong volume is mounted during read, unload_autochanger.
169 kes Stop searching for Volumes in SD askdir if DIR returns the
170 same volume name twice in a row.
172 kes Tweak the swap Volume from one drive to another code so that
173 it now seems to work.
174 kes Resolve several problems with recycling that broke the new
175 code (these problems are in 2.2.9 as well).
176 kes Remove the volume lock when calling the sysop code.
177 kes Don't mark a reserved volume with no writers as unused otherwise
180 kes Rework class structures for VOLRES, DCR, and DEVICE to make
181 the method names a bit more logical, and for more logically
182 handling the responsibilities.
184 kes Remove redundant code in terminating the scheduler that just
185 causes a seg fault in many cases.
186 kes Cleanup releasing a volume and make it a DCR method.
187 kes Improve algorithm for detecting pre-reserved volume and
190 kes Tweak volume swapping code so it works.
191 kes Correct name overloading in mount.c
192 kes Replace released flag in VOLRES with reserved and add access
193 methods for the VOLRES class.
194 kes Prevent volume from being released while being swapped.
195 kes Refactor parts of stored/mount.c
197 ebl Add sanity checks for VolWriteTime and VolReadTime
198 ebl Take care of bad clock changes while computing VolWriteTime
199 and VolReadTime. This should fix or limit #1066
200 kes Correct error string numbers in dird/catreq.c
201 kes Restructure reserving, acquiring, and mounting volumes. Calls to
202 autochanger are deferred for mount.c -- simplifes the code.
204 kes Do not prune any running job. It just fails the job.
205 kes Lock the volumes when changing dev->reserved_device and marking
206 the volume unused otherwise the device can get reserved by
207 another job before the volume is released, thus blocking it.
210 Beta Release Version 2.2.9-b7
212 kes Close bat console windows first to eliminate error message
214 kes Remove useless code in Scheduler that causes seg fault on
216 kes Correct some SD catalog request error messages.
217 kes Don't allow pruning of any running job.
218 kes Turn off code in read_record that causes a seg fault in the SD
219 when reading past an EOS_LABEL.
220 kes Turn off unloading the autochanger in reserve.c as it just
222 kes Lock volumes when unreserving a device.
223 kes Do not mark volume unused when recycling.
224 kes When acquiring, don't mark volume unused if it is reserved (busy).
226 Beta Release Version 2.2.9-b6
228 kes Eliminate ./configure warning on po directory
229 kes Fix bug #1063, reuse of freed ptr in list nextvol.
230 kes Release regex compile buffer in filed/job.c
231 kes Add proper type of const char in sql_create.c
232 kes Turn off debug in daemon termination routines
233 kes Move free_volume_list() before devices are freed in stored.c
234 kes Fix reference to uninitalized stack variables in bregex.c.
235 This should correct bug #1067.
237 kes Fix possible seg fault in SD when freeing a volume entry.
239 kes Apply patch from bug #1069 that corrects spurious error messages
240 when ACLs enabled on SGI but no ACL exists.
241 ebl Fix a storage deamon segfault at debug level 500.
243 Beta Release Version 2.2.9-b5 -- not released
245 Beta Release Version 2.2.9-b4
247 kes Re-enable code to remember last volume mounted on a non-tape
249 kes Add patch supplied in bug #1068 that fixes a SD crash when using
250 a Virtual autochanger.
251 kes Generate correct JobMedia records during spooling/despooling when
252 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
253 <tih@hamartun.priv.no> for excellent analysis and testing.
255 Beta release Version 2.2.9-b3
257 kes Rework certain SD locking based on gdb tracebacks of deadlocks
258 sent by Eric. This code now uses only the volume_lock() rather
259 than the reservations lock when at EOM and acquiring a new
261 kes Ensure only one exit point in several subroutines.
263 Beta release version 2.2.9-b2
265 kes Fix to initial tape drive open to release the volume name
267 Beta release Version 2.2.9-b1
269 kes Fix to JobMedia fix.
270 kes Fix bug pointed out by Peter Much that causes the StorageId to
271 be updated when reading a tape (during migration, it could have
272 been incorrectly set to the write StorageId).
274 kes Implement autostart scripts for Debian
276 kes Fix mtx-changer.in for broken Debian mt program.
278 kes Massive commit of all fixes and back ports to create 2.2.9
280 kes Apply doc fix from bug #1062.
281 kes Resolve crash and improper restore wx-console Win32 restore
282 GUI. Fixes bug #1065.
283 kes Update Win32 wxWidgets to latest version.
284 kes Attempt to do correct handling of Win32 mount points. Should
286 kes Fix Win32 FD backup/restore memory leak due to improper termination
287 of BackupRead/Write. This fixes bug# 1038.
288 kes Add const to AIX prototype for initgroups()
290 kes Undo bug #1047 heap overrun fix as it is not correct.
292 kes Fix creating first JobMedia record during Migration to include
293 proper index. This caused slow restores of migrated jobs.
295 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
296 and do not strip paths on symbolic links.
297 kes Set catalog backup database and user name from values specified on
298 the ./configure line.
299 ebl Apply patch to correct bug #1031, about wrong pool source information
302 Release Version 2.2.8
304 kes Apply patch from Martin to correct bug #1040, bscan sets existing
306 kes Fixed important spelling error in doc -- bug #1045.
308 kes Move initialization of read/write res lock earlier in the code.
309 This fixes the crash with a null conf file. This fixes bug
311 kes Redefine CURES in lib/parse_conf to be URES and move it all
312 into lib/parse_conf.c -- this responds to bug #1042, but does
313 not fix it. The fix is not to compile with FORTIFY_SOURCE.
314 kes Backport fix de-referencing a NULL pointer in the scanner from
315 the trunk SVN. I don't think this was reported as a bug.
317 Beta release Version 2.2.8
319 kes Re-enable the new job code editing (%f).
321 kes Fix bsnprintf for float point numbers. I broke recently when
322 parameterizing some variables. This fixes bug #1036.
324 kes Move Heartbeat documentation from Job to Director resource.
325 This fixes bug #1033.
327 kes Fix existing switch drive SD code to call autochanger to release
328 any old volume. This must be done to keep the autochanger from
329 releasing subsequently newly reserved volumes in doing a close().
330 This should possibly fix bugs #1032 and #1018.
331 kes Apply big backport of current SVN SD code that corrects a number
332 of race conditions. This is a first step in fixing bug #1018.
334 ebl Fixes bug #1028 where "Selection Type" option was not usable
338 Release Version 2.2.7
340 kes Partial back out (disabled) %f job code editing because it
341 does not build on Win32.
342 kes Fix seg fault Frank Sweetser reports in regression testing
343 on his systems. The problem was that the original author of
344 bsnprintf.c did not take into account the side effects of
345 using ++x in the argument to a #define.
347 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
348 that implements double quoting include names in conf files,
349 and also allows piping input by having the first character
350 be a vertical bar (|).
351 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
352 that implement %f in RunScripts to pass the FileSet name.
353 kes Skip leading | when lex input comes from a pipe as suggested
354 by Michael Stapelberg <michael@stapelberg.de>.
356 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
357 Nerijus Baliunas <nerijus@users.sourceforge.net>
359 kes This patch corrects a problem where the maximum concurrent storage
360 jobs counter gets out of sync during restore jobs causing jobs to
361 'wait on max Storage jobs'. This patch fixes bug #1009.
363 kes Add new include to postgresql.c suggested by Marc Cousins so
364 that it compiles correctly with pgre version 8.3. Also fix
365 misuse of %x with pointer (should be %p).
367 kes This patch fixes bcopy so that it produces correct Volumes.
369 kes This patch eliminates spurious output to the console during a VerifyVolume
370 job that contains encrypted data. It fixes bug #1024.
372 kes This patch prevents the 'status dir' command from trying to use a scratch
373 volume and possibly moving it from one pool to another. This patch fixes
376 kes Fix --archivedir addition to configure. Replace it with
377 --with-archivedir in configure.in This fixes the regression
379 kes This patch fixes bug #1012 where the job is canceled because
380 of Max Run Time exceeded when the job has not yet started.
382 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
383 one 'part' to write. Instead of each part being stored on disk,
384 written to DVD, then deleted from disk, all parts are written to disk,
385 and only the last is written and deleted from disk.
387 kes Correct typos in disk-changer.in
389 kes This patch fixes the status command to include the formating string for
390 JS_AttrInserting. It fixes bug #1021.
391 kes This patch should fix the Mac OS X build problem on the latest
392 Darwin, where sys/types.h was not included correctly (apparently
393 due to a change in the Mac headers). The solution was to explicitly
394 ensure that it is defined for the ./configure.
395 This patch also has a rebuild of configure that includes the Debian
396 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
397 kes This patch should ensure that queued messages to the console are
398 displayed as soon as possible. It should fix bug #1007, but has been
399 reported not to work.
401 kes This patch fixes the infinite loop when trying to increase the
402 maximum number of volumes in a Pool during the add command.
403 This patch fixes bug #1008.
405 Release Version 2.2.6
407 kes Get fix for joblist bug in bat from trunk.
409 kes This patch fixes bug #1003 where putting the message output from
410 a Verify job into the catalog results in a recursive loop. The problem
411 seems to show up only with postgresql (to be verified).
413 kes Fix bug #942 where lots of emails where generated when the heartbeat
414 interval was low and Bacula wanted a different tape from the one in
417 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
418 which was updated during a restore (or a reading migration) bug #982
420 ebl Use qmake-qt4 instead of qmake when available (debian system).
422 kes Add a security warning to src/cats/make_catalog_backup.in indicating
423 that passing the password via the command line (arg 3) is insecure.
424 This responds to bug #990 (it doesn't fix it).
425 kes Apply 2.2.5-postgresql-errors.patch
426 kes Remove unneeded File table index on JobId, which is already
427 present as the first index of another multi-index.
429 kes Set default debug_level to zero. This corrects bugs #991 and #993.
430 kes Fix a crash in bat when it cannot connect to the Director for example
431 if the Director is not running.
433 kes Activate Close button on tray-monitor window. This fixes
436 kes Fix spurious warning message printed when creating a volume with
437 a LabelFormat. This fixes bug #976.
439 Release Version 2.2.5
441 kes Add JobId in place of Job name in all the Jmsg() output.
442 kes Correct the APP_DESC for the Win32 storage service (remove an e).
444 kes Add new SD despooling attributes and Dir inserting attributes
445 job status codes. This fixes bug #961.
446 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
448 kes Fix doc issue. This fixes bug #963.
449 kes Fix listing performance problems in bat. Pointed out by
451 ebl Fix replace on restore. This fixes bug #969
452 kes Fix bat code that tests for Win32. This should fix bug #968
453 kes Query 5 list wrong Vol after migration. This fixes bug #960
455 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
456 in back porting from 2.3.x
458 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
459 The details are included in the notes in this file.
461 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
462 messages; it fixes a problem opening the SQLite3 database when multiple
463 simultaneous jobs were running; it fixes a bug with certain versions of
464 MySQL where batch inserts failed because of table name character case
465 (upper/lower) differences.
466 kes Fix race condition that drops final block written to volume.
467 This happens in rare cases with multiple simultaneous jobs
468 when the Volume fills. This fixes bug #964. May be related
469 to bug #935 and possibly #903.
471 kes Fix FD->SD authorization failure, which was due to spurious
472 wakeups from a pthread_cond_timedwait(). Simply check the
473 predicate before continuing. This fixes bug #953
474 dvl Add new configuration item --archivedir
475 dvl Adjust regression tests to use tmp not /tmp. This will allow
476 multiple concurrent runs of the regression tests.
478 kes Eliminate more strerror() and replace with bstrerror().
479 kes Remove BSD getopt and replace with unrestricted IBM version.
480 kes Fix Win32 build for changed calling sequences.
482 kes Fix FD->SD authorization failure, which was due to spurious
483 wakeups from a pthread_cond_timedwait(). Simply check the
484 predicate before continuing. This fixes bug #953.
485 kes Add const char where needed (more to do).
487 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
488 kes Don't overwrite error message in check_tables_version.
490 kes Unlock batch insert tables with same calls used elsewhere.
491 kes Allow starting 59 jobs a second.
492 kes Make SD session key more random.
493 kes Add retry for SQLite opening db if it fails. Probably helps
495 kes Suppress extra error messages during batch insert failure.
497 kes Put some FD auth code on dbglvl rather than fixed.
498 kes Return insert attributes error message in db msg buffer to avoid
499 false error messages. Helps fix bug #966.
500 kes Separate batch init error messages. Probably helps fix bug #966.
501 kes If Dir gets an error during inserting attributes, cancel SD.
502 This reduces unnecessary error messages.
504 ebl Cleanup batch insert code. Probably fixes bug #965.
506 kes Turn off some code when batch insert not enabled.
507 kes Edit FD name in connect error messages.
509 kes Add code to handle tray monitor separated from Win32 FD.
510 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
512 kes Fix ANSI tape labeling. This fixes bug #954.
513 kes Increase the max block size to 4MB fixes bug #957.
514 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
515 is not properly mounted (recognized) during a poll.
516 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
517 Job that has differences reports Verify OK.
518 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
520 Release Version 2.2.4
522 kes Increase size of name string when FD making connection to SD.
525 kes Add waits to multiple exit detection code to try to force pid
526 file to always be deleted.
527 kes Restore good dev.tar.gz to rescue set appropriate binary property.
529 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
530 trying to switch drives by checking for blocking before unblocking.
532 kes Cancel storage daemon in all cases where FD reports error. This
533 should fix virtually all cases of bug #920.
535 kes Fix error message that was clobbered when Dir tells SD it does not
536 have write permission on Volume. This should fix a minor point
537 in bug #942, but not the main problem.
538 kes Add code to cancel job in SD if FD connection fails. This should
540 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
541 kes Fix migration code to get correct Volume name with multiple volumes
542 by skipping |. Fixes bug #936.
543 kes Implement patch supplied by Landon to fix bug #944 where using
544 TLS with bconsole uses 99+% of the CPU.
545 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
547 kes Move patches into patches directory.
549 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
552 ebl Using 'm' in bconsole will show messages like before,
553 and not memory usage.
555 Release Version 2.2.3
556 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
559 kes Fix bug #935, and probably also bug #903 where files were not
560 restored. MediaId was not properly set in JobMedia record after
563 kes Add ./configure search in qwt-qt4 for qwt package
564 kes Apply Martin Simmons patch that should turn off the new API usage
565 when batch insert is turned off allowing building on older
568 Release Version 2.2.2
570 ebl Detect if new PosgreSQL batch insert API is present.
571 kes Correct incorrect mempool call causing Director crash.
572 sb Update spec files for 2.2.1 release
574 Release Version 2.2.1
576 kes Update POTFILES.in
577 kes Cleanup a few underquoted AC_DEFUNs in configure
578 kes Apply patch from Martin Simmons that adds a test for va_copy to
581 kes Fix bug #921 by increasing the number of tries to create a new volume
583 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
584 can be called multiple times. Implement a version for machines
585 without va_copy() that gets a big buffer.
587 kes Integrate more portable zone offset code into bsmtp.c
588 Submitted by Attila Fülöp.
590 kes Fix bad SD->FD return status reported by
591 (James Harper) <james.harper@bendigoit.com.au>
592 ebl Fix a bug in read_close_session which return random status
593 thanks to James Harper
595 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
596 and directory names during restore of single file/directories.
597 kes Add sanity checks to .sql command when string is empty. Hopefully
598 that will resolve Dirks Director crash.
600 kes Apply patch submitted by Martin Simmons that corrects a seg fault
601 in the bsmtp chat subroutine when debug is >= 10.
603 kes Fix Director crash when running bat SQL queries.
604 kes Add David's notes on Item 8: Copy pools.
606 kes Rework projects file to be current and ready for a vote.
607 kes Enhance lex scanner error message.
609 kes Tweak LICENSE file to mention BSD code.
610 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
611 if specified on the ./configure.
612 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
613 This class is intended to allow us to open a second bsock to the
614 Director while in the restore subdialog.
616 kes Fix configure to create bat Makefile before creating dependencies.
617 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
618 kes Add a tooltip to the tray monitor.
619 dvl Set the Director's PID file before dropping privs. This fixes
622 kes Update AUTHORs file
623 kes Increase the default max concurrent jobs to 20 in FD and SD to
624 correspond with the default .conf files.
625 kes Rewrite the Win32 service routines. This eliminates the 3 copies
626 some different, of the same file created by RN when porting the
628 kes Rearrange some of the Win32 directories and the placement of the files
630 kes Set DEVELOPER flag in version.h
632 ========================================================================
633 Release Version 2.2.0
635 kes Apply a second doc patch from Marc.
636 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
637 improves the tips section that discusses how to setup multiple
640 kes Update bat README file.
641 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
642 corrects a typo in the Recycle status check in db_find_next_volume().
643 This will probably fix a number of annoying problems with multiple
645 kes Modify most of dird/msgchan.c to use bsock class calls rather than
646 bnet calls -- no functionality change.
648 kes Modify the Verify output to specify if files are missing on
649 the Volume(s) or disk. Fixes confusion in bug #916.
650 kes When more than one Volume is read in a migration job, the last
651 Volume bytes reported are from the last read volume rather than
652 the last written volume. Fixed. This fixes bug #910.
653 kes Fix display of Recycle flag after update volume=foo recycle=yes.
654 It previously printed New Recyle flag is: no. This fixes bug
657 kes Correct seg fault when switching tape drives during restore.
658 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
659 be used until after 2.2.0 release.
661 kes Remove fnmatch() in SD that permitted wild card specifications.
664 kes Fix %g in filename returned by SQL for browse tree reported by
666 kes Fix configure so that it puts config.out in the cwd rather than
668 kes Attempt to fix the locking problem reported by Eric in bug #906.
669 kes Make berrno class to leave errno unchanged after constructor call.
670 kes Make bnet_server use the heap rather than the stack to allocate
671 its socket fd pointers to avoid a crash at termination. Problem
672 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
674 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
675 and putting it in depkgs-qt along with Qt4.3.
677 kes Rework code in acquire.c that switches drives for reading when
678 the Media Type does not match. This should fix bug #906
680 ebl Fix a director segfault during job setup #907
681 kes Correct seg fault in postgresql when first operation returns no
682 rows. Fixes Dirks File browser problem seg fault with bat.
684 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
685 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
688 kes Implement PopUp YES/NO dialog for bat.
690 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
692 kes Correct RunScript to terminate job in FD on failure.
693 kes Change abort_on_error and AbortJobOnError to fail_on_error
694 and FailJobOnError in RunScripts.
695 kes Minor tweaks of code formating in RunScripts, principally to
696 avoid depassing 80 columns.
698 kes Eliminate one #ifdef Win32 in bsmtp
699 kes Implement grow tool to grow a file for testing very large databases.
700 kes Add big-vol-test to test Bacula seeking with > 5GB.
703 kes Modify find_next_volume() to return all values in Media record.
704 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
708 kes Update Release notes
710 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
711 Warning, in previous beta version, all media get from scratch keep their
714 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
715 This should fix bug #842. Made a note to look at removing the temp
716 files at the end of the install.
717 kes Add ability to mount and unmount a file device providing it is
718 marked as being removable and has the appropriate mount and unmount
719 commands defined in the Device resource. This fixes bug #830.
720 kes When applying a storage override, release all previous storage
721 definitions rather than just prepending the new storage.
722 This should prevent a good deal of confusion.
724 kes Implement ./configure search for qwt libraries.
726 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
727 Win32 FD. This should fix bug #893.
728 kes Remove an unnecessary beep in Win32 init code.
729 kes Update copyright dates in Win32 executable about boxes.
730 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
731 code with a BSD getopt.c and getopt.h.
732 kes Remove sched.h from the Win32 compat directory -- not used.
733 kes Remove the Exit menu item from the Win32 tray monitor. If you really
734 need to shut it down, do it through the services panel or the command
736 kes Remove some inappropriate Bacula FSFE copyrights.
737 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
738 kes Fix regress config non-portable test as pointed out by
739 Florian Heigl <florian.heigl@gmail.com>
740 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
741 as pointed out by Florian Heigl <florian.heigl@gmail.com>
743 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
744 Reported by Frank Sweetser.
748 kes Fix client-only build.
749 kes Integrate client-only fixes for bsys (initgroups) and conio from
750 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
751 kes Make arguments to get_scratch_volume() in same order as other
753 kes Rework the prune_volumes() subroutine so that after purging and
754 no volume found in desired pool, it will check for a scratch
755 volume. This prevents recycling the whole scratch pool.
756 kes Add code to status storage to print boffset_t (largefile support).
758 kes Move qwt (Graphics libarary for Qt4) to depkgs.
759 kes You now need a --with-qwt=<dir> to be able to build bat.
760 kes Update src/win32/cats/bacula_cats.def to include the new
761 db_get_query_dbids() call on Win32.
763 kes Correct a problem when selecting a scratch volume and moving
764 it to another pool that lost some columns.
765 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
766 kes Enhance Autochanger error messages to include Volume and device name.
767 kes Rework prune_volumes() code to take account of InChanger flag,
768 and to handle recycling volumes going to the Scratch pool and
769 current pool because the RecyclePool directive.
770 kes Implement a better and more efficient db_get_query_dbids() to
771 handle creating and passing back a list of DBIds.
775 kes Start work on new more efficient DBId subroutine. First use
776 will be for recycling volume to Scratch inchanger.
777 kes Increase number of JobIds in pruning from 1000 to 10000.
778 This to be replaced by above routine.
779 kes Begin implementation of building Qt4 on Win32.
780 kes Correct typo in fix I added for bad TLS shutdown.
781 kes Pull 2.0.3 patches into patches directory.
782 kes Update Release notes. Include qt-console in line count.
783 kes Update Projects file.
785 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
786 bug in migration code where a job that spanned two volumes
789 kes Implement new BST_DESPOOLING blocked state. Change from locking
790 during despooling in SD to blocking. This means that other threads
791 can work with the device structure, in particular the reservations
792 system while despooling.
794 kes Fix return in reservation message queue that missed clearing
795 the jcr lock (implemented 26Jun07 below).
796 kes Rename a number of dev methods to make locking function names
798 kes Document locking in lock.c. Move lock structures to new file
801 kes Move reservations message lock to lock jcr only this
803 kes Move main SD locking code into lock.c (new file).
804 kes Update Win32 build to include lock.c
808 kes Dirk committed the qwt library code for drawing graphs in bat.
809 kes Tweak install of qwt so that it is integrated with ./configure.
811 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
812 out by Eric (my typo).
813 ebl Fix configure.in to get batch mode enable
814 kes Return correct string from authenticate.cpp in bat when connecting
816 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
817 spurious line drops when using TLS.
818 kes Do not file reparse points when restoring a file that already
821 kes Implement Windows reparse points -- similar to directories, but
822 we do not descend into it. This is a first cut. They seem to
823 be backed up, but restore is not yet tested.
824 kes Remove restore_blocking in tls code when shutting a socket to leave
825 it in blocking mode. Hopefully this will fix the encryption bug
826 reported by Frank Sweetser.
827 kes When opening a file for backup, tell the OS that we are going to
828 read it sequentially -- optimization.
829 kes Change variable names in authenticate_director() to not conflict
830 with member names in bat. Caused great confusion with compiler,
833 kes Queue openssl error messages in case of comm problem.
834 kes Do shutdown() call if socket terminated.
835 kes Remove some duplicated code in tls.c
836 kes Move more of the bsock member variables into private and access
838 kes Add Frank Sweetser's tls-test to the regression suite.
840 kes Add Swedish sv.po file
842 kes Don't print clock skew message in FD if less than 3 seconds diff.
843 kes Add a bit of VSS info to status client.
844 kes Implement a first cut of Vista VSS, using Win2003 code.
848 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
849 loaded tape but uses first drive).
850 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
851 This was indeed a Win32 issue.
853 kes Simplify search of autochanger for in-use Volume.
854 kes Fix exit condition of check for in-use volume. kes Remove
855 inappropriate my_postgresql_free_result() in db_close()
857 kes Fix bad return in FD when encryption signature not found.
858 Probably caused a crash.
859 kes Inhibit missing encryption signature error messages for
860 file types where no signature computed.
861 kes Correct inverted check on autochanger in reservation system.
862 kes Tweak debug code in autochanger reservation.
864 kes Add some additional locking in the cats directory in subroutines
865 that modify packet variables called from batch insert.
866 kes Rework how dcrs are allocated. new_dcr() can now be called
867 with an existing pointer, and it will simply clean it up.
868 This allows the reservation system to test various different
869 devices, and will permit easy device changes.
870 kes A bunch of changes all over to handle new new_dcr() calling
872 kes Work more on the Volume management in the SD. Remember Volumes
873 for tape drives and for autochangers (even virtual disk changers).
874 kes When looking at the Volume list to reserve a drive, handle
875 autochanger names correctly by interating through the changer
876 devices. Also call the Director to see if a Volume is suitable
878 kes Fix some bugs in bscan. Make sure all media records are written.
879 Make sure that valid JobMedia records are written for disk files.
880 Previously they were completely wrong.
881 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
882 that the URLs don't change and so that the developers will all
883 work off the same copy. Rebuild from scrach.
884 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
888 kes Fix seg fault in FD from incorrect digest size.
889 kes Fix argument to non-OpenSSL crypto.c subroutine.
893 kes Remove a few malloc()s from the encryption code.
894 kes Use the class calls to bsock in filed/backup.c and restore.c in
895 place of the old bnet_xxx code.
896 kes Implement code that does an on the fly calculation of the
897 signing digest during restore of encrypted files. It makes
898 a best guess at the algorithm, and if it is not correct, will
899 then revert to the old code which reads the file after it is
901 kes Implement at least one missing crypto stream in stream_to_ascii()
902 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
903 #877 where a reload with bad syntax causes Dir to exit.
905 Cut: 2.1.14 beta (not released)
907 kes Do not free a volume on a tape drive until another volume is
908 mounted and read, or the autochanger unloads the volume.
909 This should help the SD re-use volumes that are already mounted,
910 and should fix bug #886.
911 kes Apply patch from user brettedgar that allows gnome2-console include
912 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
913 kes Apply patch from Lucien Weller that fixes day of week calculation
914 because of DST flag problem. Fixes bug #887.
916 kes Move find_next_appendable_volume() to after acquiring a valid device
917 in reserve.c. This fixes bug #864 -- confirmed by reporter.
919 kes Unable to reproduce bug 872. However added additional testing for
921 kes Bug #874 resolved by documenting SQLite limitations.
922 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
923 kes Bug #881 resolved by removing typo in mtx-changer script.
924 kes Made Frank Sweetser's wiki the official Bacula wiki with his
925 approval. Added a link to the wiki on the web page, and implemented
926 a backup from http://paramount.ind.wpi.edu
928 kes Fix update allfrompool to pass pool name.
930 kes Convert to pure GPL v2 license.
931 kes Fix sscanf problems reported by Peter Buschman that caused
932 a bus error on Solaris.
933 kes Rework (simplify) the select prompt in bat.
934 kes Move get_jobid_from_tid() into lib and create a
936 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
937 should definitely fix the problem of lost error messages in the
939 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
940 kes Eliminate tcpd.h from the project. Enclose the #include from the
941 library with extern C ...
942 kes Add print of signal name when a signal is trapped.
946 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
948 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
949 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
950 makes SQLit3 run 30 times faster, though a bit less safe.
951 kes Implement --with-batch-insert in configure and detection of thread
952 safe libraries. It is on by default, but turned off if no thread
953 safe library (e.g. SQLite 2) is available.
955 kes Fix Bacula PostgreSQL buffer overruns.
956 kes Do better checking for NULL results returned from PostgreSQL;
957 implement retry for failed queries; clear results buffer after
958 failed query. Hopefully this will correct the PostgreSQL failures.
960 kes Implement algorithm to handle only one appendable volume with
961 Prefer Mounted Volumes = no.
962 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
963 returned from a query.
964 kes Make volume lock recursive.
965 kes Implement an additional volume reservation algorithm that
966 starts by considering all reserved volumes then uses the
967 old brute force algorithm of searching the resources to
968 find a suitable device.
969 kes Add new reservations debug code and refine the old code.
970 kes Update the win32/dll/bacula.defs file.
972 kes Tweak reservations algorithm to permit a few more cases, i.e.
973 volume reserved, but on different drive, ...
974 kes Enhance SD status to include Pool and Media Type for drive in a
975 more readable format (a bit longer).
976 kes Fix PostgreSQL double free.
978 kes Minor refactoring of restore decryption code.
979 kes Add code to smartall.c to detect double free of a buffer.
981 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
982 so that bsmtp will create a correct email address (mailbox only).
983 kes Modify 'memory' command so that the buffers are listed as 'In use'
984 to avoid confusion with Orphaned buffers.
985 kes I reworked the OpenSSL include/lib flags to be handled in
986 the standard Bacula way, which should fix bug #863 concerning
987 non-standard OpenSSL libraries.
989 kes Implement Help Browser window for bat.
990 kes Fix reload bug that reset StorageId to zero.
992 kes Fix TLS #ifdefing when TLS turned off.
993 kes Ensure that when labelling a tape with Slot=0 that InChanger
995 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
997 kes Add StartTime to final uar_sel_jobid_temp query so that we can
998 add DISTINCT (required by PostgreSQL).
999 kes Implement BSOCK authenticate_director() method. Eventually will
1000 authenicate all daemons.
1001 kes Move several more functions into the BSOCK class.
1003 kes Add code to tell the OS that we no longer need a cached
1004 file that we were reading. In findlib/bfile.c. Also,
1005 only cache files that we are reading. Thanks to
1006 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1007 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1008 kes Implement script to automatically generate cats and dll .def
1009 files for Win32 dll.
1010 kes Update README.mingw32 to include new .def file generation.
1011 kes Correct typo in UTF-8 error message as reported by:
1012 jhernandez <julianhernandez@gmail.com>
1013 kes Add additional sm_check() code on debug level 1.
1014 kes Set default debug level to 1.
1015 kes Trap SIGABRT in attempt to get traceback.
1017 kes Reduce bat connect timeout from 30 to 15 seconds.
1018 kes More restructuring and implementing BSOCK class in place of
1020 kes Remove a few unnecessary malloc() tests in crypto code.
1021 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1022 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1023 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1025 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1027 kes Fix Verify InitCatalog. The attributes were not pointing to the
1028 correct saved location.
1029 kes Implement message callback so that GUI is sure to get all
1030 daemon messages. Currently displayed in a dialog in bat.
1031 kes Ignore SIGUSR2 (Bacula timer) in bat.
1032 kes Apply regress patch from bug #859 to allow regress to work
1033 with Solaris compiler.
1035 kes Begin adding TLS support to bat.
1036 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1037 clean up lex.c and make it more readable.
1039 kes Move more bnet functions into the BSOCK class.
1040 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1041 kes Complete change of berrno strerror() method to bstrerror()
1043 Release: 2.1.10 beta
1045 kes Cleanup incorrect email addresses in bsmtp.
1046 kes Make bat display initial messages rather than discard them.
1048 kes First cut of adding .mod to the run command.
1049 kes Implement auto display of messages in bat.
1050 kes Enhanced preferences to allow all Bacula output to be
1053 kes Try to make bsmtp date routines more generic.
1054 kes Fixed bug #856 autochanger documentation.
1055 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1056 kes Add new cats entry point so Win32 builds.
1058 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1060 kes Do better checking for the MySQL 64 bit libraries looking for both
1061 .a and .so libraries.
1062 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1063 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1064 kes Require the thread safe version of MySQL during configure. Thanks
1065 to Andre Noll for pointing this out.
1066 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1067 continuing in migration code.
1068 kes Apply implementation of tray-monitor font derived from gnome-console
1069 submitted by Andreas Piesk <a.piesk@gmx.net>
1071 kes Eliminate important memory loss in SQLite
1072 kes Fixed the batch insert MySQL thread specific data that was not
1073 being freed. See cats/mysql.c:db_thread_cleanup().
1074 kes Fix restore before command.
1075 kes Convert old hdr.name to name() in a few places.
1076 kes Implement update jobid command.
1077 kes Return all time_t dates in db_get_job_record()
1078 kes Stop watchdog in SD earlier.
1079 kes Put Pool just after Storage in please mount message.
1080 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1083 kes Update the po files.
1084 kes Fix Verify InitCatalog by making it cache attributes.
1086 kes Change name bacula-bat to bat for man 1 page to correspond to
1088 kes Check for client and store NULL pointers in status command. This
1090 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1091 kes Fix sign extended editing of %p.
1092 kes Clean out a little old #ifdefing in cats/mysql.c
1094 kes If time diff between DIR and FD is more than 600 seconds convert
1095 INFO message to WARNING.
1096 kes Implement heap size display in status for all daemons.
1097 kes Attempt to fix MySQL db open memory loss (not successfull).
1098 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1099 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1100 Query. This looks like a MySQL but but by doing extra releases,
1101 the memory goes away. This should fix bug #847.
1103 kes When backup fails, cancel SD before waiting for sd termination.
1104 kes If SD is waiting for FD to connect during cancel, wake up the
1106 kes Fix fsf code so that errno is correctly reported.
1107 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1109 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1110 so that Bacula doesn't later stumble into a seg fault.
1111 kes Use the term Restore Client in the restore Job report.
1112 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1113 the original job's FileSetId.
1114 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1115 spooling in migration jobs. Not yet tested.
1116 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1117 reading conf file from a pipe. However, do it with open_bpipe()
1118 rather than popen. Not yet tested.
1120 kes Fix an ugly bug where the VolCatBytes were getting updated
1122 kes Implement bconsole memory command that prints current memory
1123 usage, plus smartalloc dump.
1124 kes Clarify some error messages in backup, admin, and migrate.
1125 kes Shrink label dialog to smaller size.
1126 kes Invert Cancel OK buttons on restore to be OK Cancel.
1127 kes More strerror() to bstrerror() conversions.
1129 kes Start implementing bstrerror() in place of strerror().
1130 kes Stripping path -- seems to work.
1132 kes Prevent door and port files from being restored (mostly
1134 kes Free an unreleased buffer in compat code.
1135 kes Change console Job name from *Console* to -Console- to eliminate
1136 Win32 filename problems. Put Win32 path separator when creating
1137 Console file. This fixes bug #846.
1138 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1140 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1142 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1143 to force Win32 error message.
1145 kes First cut strip path. The data should be passed to the FD,
1146 but nothing is done with it yet.
1147 kes Enhance the digest and signature routines in the crypto
1148 library to accept a JCR and to use it to print error messages
1149 so that they will go in the Job report rather than the daemon's
1151 kes Simplify some of the verify signature code.
1152 kes Simplify a few of the alternative returns in the signature
1155 ebl Use only POSIX regex instead of GNU regex in breg.c for
1156 File relocation. It fix broken freebsd compilation.
1157 kes Convert all other Dir files to use new ua class message
1159 kes Tentative fix for missing digest signature in bug 807.
1160 kes Correct handle problem in new win32_ftruncate routine.
1161 kes Convert ua_purge.c and ua_update.c to use new ua class
1162 message routines for bat.
1164 kes Correct incorrect installation of LICENSE in Win32 installer.
1165 kes Display LICENSE at the beginning of the Win32 install.
1166 kes Attempt to correct the need for the png files to be installed
1168 kes Reapply my bat.conf install script in qt-console. I think I
1169 editted bat.pro instead of bat.pro.in and it was lost.
1170 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1171 the /var/lock/subsys for subsysdir. Also corrects typos in the
1174 kes First cut update job.
1175 kes Correct configure to include qmake of src/qt-console directory.
1177 kes Make restore job yes/mod/no print in one command so GUI works.
1178 kes First cut implementing backup and restore client.
1179 kes Correct editing in Verify output that caused a seg fault.
1181 kes Insure that bat.conf is not overwritten during installation.
1182 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1183 while I was implementing migration in March 2006 !
1185 ebl Cleanup file relocation, using char *RegexWhere instead of
1186 char *where + bool where_use_regexp
1187 kes Update some manpages and add bat manpage.
1188 kes Make a first cut at converting bacula.spec.in for bwx-console
1190 kes Apply patch from John Goerzen to add hostname as fourth argument
1191 to make_catalog_backup script.
1192 kes Fix typos I introduced into bsmtp.c
1193 kes Make pm_strxxx() routines handle input of NULL pointer. This
1194 is to protect from NULL pointers returned from SQL databases.
1195 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1196 kes Add more debug to FIFO code -- fix fifo regression test.
1198 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1199 kes Add thread timer to bnet_connect() to break from OS if wait time
1202 kes Update Win32 build to include new files, new symbols, and
1204 kes Implement socket level heartbeat (tcp_keepidle)
1205 ebl Commit File relocation patch
1206 kes Make bat have 'make install' target.
1207 kes Warn during install if old gnome-console binary found.
1208 kes Warn during install if old wx-console binary found.
1209 kes Add -8 option to bsmtp command line to add content type utf-8.
1210 Fixes bug #809. (Character coding problem in bsmtp).
1211 kes If < is found in target (from, to, cc) then do not enclose the
1212 target in < > in bsmtp. Fixes bug #772 (malformed address).
1213 kes When printing certain items in dbcheck, stop after 300000.
1214 Fixes bug #822. (dbcheck loops).
1215 kes Incorrect status in Dir after waiting for mount with poll set.
1218 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1220 kes Print waiting to reserve a device every 5 mins.
1222 kes Don't call close_part in label.c if tape and relabel.
1223 kes Don't free volume if busy in close() -- should help with
1225 ebl Fix #824 RunScript bug (After script could be execute twice)
1226 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1227 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1228 Add a regression script to test RunScript
1230 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1233 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1234 deprecated. No additional bugs will be fixed, and they will be dropped
1235 in a future release (probably 2.4.0).
1236 kes Change name of wx-console to bwx-console to make it more Bacula
1238 kes Change the name of gnome-console to bgnome-console to make it
1241 kes Some time in March, a Feature Request with patch from Jorj Bauer
1242 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1244 The ability for the director to validate a Client (FD) CN against
1245 an arbitrary set of patterns rather than the hostname, with
1246 A new 'TLS Allowed CN' set of directives which are implemented
1247 in the Client resource. Then pattern matching is used in place
1248 of hostname matching against the Certificate's CN. As an example, we
1249 have certificates which (a) use a local CA, and (b) have a CN of the
1251 kes Add new/changed entry points to Win32 build
1252 kes Create unaccepted-projects for projects that are not accepted.
1253 kes Simplify locking in the reservations system.
1254 kes Add more debug code in reservations.
1255 kes Make sure error condition on reserving a volume is handled correctly.
1256 kes Correct handling of volume_in_use.
1257 kes Correct handling of initializing a device.
1258 kes Move handling of broadcasting releasing a device into release_device().
1259 kes Correct attaching dcr to dev so that it is only done if device
1260 is properly initiated.
1262 kes Locking debug level tweaks in SD.
1263 kes Tweak new Volume code.
1265 kes Add exec external-command [wait-seconds] to bconsole. This
1266 executes the external-command. Note! normally external-command
1267 should be enclosed in double quotes.
1268 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1269 it should normally be off in a production system.
1271 kes Implement die command for SD so that we can force it to dump.
1272 kes Implement SD lock debug code.
1273 kes Implement new algorithm for keeping Volume list in SD. It
1274 is now owned by the device.
1276 kes Implement new code for freeing in use volumes that should
1277 resolve if not all, some of the problems of multiple drive
1278 tape conflicts described in bug 801.
1280 kes Fix gui/bacula-web/images files in svn.
1281 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1283 ebl Fix a bug in batch mode (in string escape)
1284 kes Correct migration prune SQL typo that crept in in a
1285 recent 2.1.x change.
1287 kes Move bnet_despool() into class in bsock.c
1288 kes Modify job report to include director name and Build OS.
1289 kes Move drop root privilege and check_catalog() before fork.
1290 kes Add update database scripts (version 9 to 10) to updatedb directory.
1292 ebl Check size and age of each file after its backup to see if
1293 it has changed during backup, if 'checkfilechanges' is set.
1294 The FD will do an extra check (stat(2)) after
1295 each file backup. mtime, ctime and size are compared with
1296 'before backup' information. If time or size mismatch, an
1297 error message will be generated. You must upgrade FD to use it.
1299 kes Make database name and user configurable
1300 --with-db-name=xxx --with-db-user=xxx
1301 kes Add back database type to message.c for debugging.
1303 kes Implement dir_sql() which issues an SQL query.
1304 kes Modify bat medialist to use dir_sql() and do some minor C++
1305 formatting as well as eliminating a number of pointers, simplifing
1308 kes Fix some of the mtx-changer grep commands for tape label readers.
1309 kes Convert a number of bsendmsg into the appropriate send/warning/error
1310 message class calls.
1311 kes Suppress the using database message in the .sql command.
1312 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1314 kes Add context menu for floating a window.
1315 kes Some minor cleanup and name changes in qt-console
1316 kes Add doing mt setblk 0 in Win32 mtx-changer.
1317 kes Apply Martin's bug fix to move definition of ENODATA for
1319 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1320 sqlite2 and sqlite3.
1322 kes More pruning cleanup.
1323 kes Turn on wait_for_drive by default in mtx-changer.
1324 kes Turn on Batch insert code by default as it now passes regression.
1325 kes Add ./configure --enable-bat to enable building of Bat.
1326 No install yet though.
1328 kes Implement a new .sql command for bat.
1329 kes Implement code to turn off pruning in obtaining the next volume.
1330 Pruning is turned off for the status dir command, but turned on
1331 for SD requests and for the list nextvolume command.
1333 kes Correct Qmsg() that was not updated correctly when committing a
1334 previous change (probably the recent TLS patch).
1336 kes Write new subroutine is_volume_purged() that explicitly checks
1337 if the Volume is purged, and if so marks it as such. This should
1338 resolve problems reported about needing to mount twice to recycle
1340 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1341 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1342 amount of duplicated code.
1343 kes Do volume pruning only for the Media Type desired (reduces pruning time
1344 if multiple Media Types are in the same pool).
1345 kes Implement more detailed info in the Job report for the Bacula version
1347 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1349 ebl Add bbatch tool to bench database and insert mode.
1350 Fix sql quote stuff in batch mode
1351 Fix sql stuff for mysql
1353 kes Correct problems with am/pm scheduling. Fixes bug #808.
1354 kes Implement new prunning code that prunes up to 1000 jobs at
1355 the same time. The same technique can be applied to a number
1356 of other prune/purge subroutines.
1357 kes Add an insanity check when starting a new tape job to ensure
1358 that the tape position has not been changed. If so fail the
1360 kes Fix Win32 build for dlls to add the folllowing:
1361 src/lib/bsock.c -- new file with new entry points
1362 src/lib/dlist.c -- new entry points
1363 src/cats/sql_create.c -- new entry point
1364 src/cats/sql_cmds.c -- new DATA item exported
1366 ebl batch mode cleanup bscan-test is ok now.
1367 kes Implement SD code to check length of disk volume before appending.
1369 kes Correct return status on db_batch... routines.
1370 kes Add call to db_write_batch_file_records() to migration code.
1371 ebl Fix AfterJob timing
1372 kes Move the checking of the database in initializion of the Director
1373 to after we drop privileges. This avoids the need for both root
1374 and bacula access to the DB.
1375 kes Correct a misplaced variable definition in src/filed/backup.c
1376 kes Correct how the new batch insert db_create_attributes_record()
1377 uses the arguments. Caused a seg fault in bscan.
1378 kes Implement lock() and unlock() methods in DEVICE class.
1379 Implement block() and set_block(xx) methods in DEVICE class.
1380 kes Modify bnet_connect() so that it uses time() to check for the
1381 wait time expiring (on some OSes, some system calls may not
1382 return immediately).
1383 kes Modify Verify to obtain the previous JobId when it is actually
1384 running rather than at schedule time (as it was in 1.38.x).
1385 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1387 kes When checking pid in pid file, continue running if the pid is
1388 the same as ours. This occurs on IRIX after a system crash.
1391 kes Extend new GUI API.
1392 kes Make the ua structure a class, and implement send_msg(),
1393 error_msg(), warning_msg(), and info_msg().
1395 kes Apply fix from for building wx-console on the Mac from
1397 kes Implement new select mechanism for GUI programs.
1398 kes Reorganize initialization of stackedWidgets in bat.
1400 kes Add updated nagios plugin supplied by Christian Masopust.
1402 kes More bat implementation.
1403 kes File migrate bug with Pool Occupancy using mediaid instead
1404 of jobids. Fixes bug #795.
1405 kes Fix orphaned buffers in filed backup and verify due to
1406 crypto buffers not freed during errors. Fixes bug #789.
1407 kes Extend new GUI api code to tree commands.
1408 kes Ensure that tree and dot commands check console ACLs.
1409 kes Permit marking directory with trailing slash.
1410 kes Allow 20 console connections (instead of only 10).
1412 kes Add smartctl call to bacula-sd.conf as an example of getting
1415 kes Modify jobq.c to let simultaneous restore jobs run. This may
1416 cause them to fail if they cannot get a drive.
1417 kes Add Client Connect Wait to Storage daemon to permit users to
1418 modify the time the SD waits for a FD connection.
1420 kes Correct virtual changer check which was backwards. This caused
1421 volumes to be unloaded into slots already occupied.
1423 kes Apply Command ACL filter to JobId list in restore command.
1424 kes Correct typeo in var.c patch.
1426 kes Don't let Bacula prune File or Job records for the current Job.
1427 kes Fix variable substitution pad + inc bug reported (with patch)
1430 kes Correct SQLite log table index as reported by Luca Berra.
1432 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1434 kes Begin implementing new comm signals for API.
1435 kes Fix a few places in lib/message.c where the open fd may
1437 kes Continue implementing lib/bsock.c (real class). Make jcr,
1438 who, host, and port private. There are new methods to access
1439 them for non-class use. This required touching a number of files.
1441 kes Add LANG=C to autoconf/randpass so it works with languages other
1442 than English. Fixes bug #788.
1444 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1446 You will not be able to generate Include/Exclude list any more.
1447 It will be fixed soon.
1448 If you want to use this, you can apply
1449 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1451 kes Restore of sockets created false error messages because Bacula
1452 no longer restores sockets, but the code was still trying to
1453 set the attributes on a non-existent file. Reported by a user.
1454 ebl finish RecyclePool feature
1455 Media will takes Pool.RecyclePool
1456 when moving from Scratch to a Pool or when user will do
1457 update volume=xxx frompool
1458 To use it, add RecyclePool = aPool to your Pool resource
1461 RecyclePool = Scratch
1465 kes Expand new BSOCK class adding signal() and new BNET signals.
1466 kes Begin enhancing the dot commands adding a new API function
1467 that returns more information and will make it easier
1468 to interface to the Director from a program.
1470 kes Make DEVICE fd private. Its new name is m_fd, and can be
1471 obtained with dev->fd() outside the class. This is the
1472 first of many DEVICE members to be made private.
1473 kes Implement Michael Renner's idea on having a virtual disk
1474 changer. I made some minor modifications (e.g. I did not
1475 implement the Virtual Changer directive, but simply set
1476 the Changer Command to an empty string.
1478 kes Implement a BSOCK send() method that writes the whole record
1479 in a single write() request rather than in two.
1480 ebl add update volume=xxx recyclepool=yyyy
1481 volume takes recyclepool from pool when using update volume=xxx from pool
1483 kes Fix encryption deblocking bug, which caused some restored files
1484 to be truncated. This fixes bug #763.
1485 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1486 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1488 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1489 ebl Use btime_t instead of uint64_t in media patch.
1491 kes Optimize the use of the database a bit in the Status dir command.
1492 Only open it when needed, ensure that if any previous database
1493 was opened, it is closed.
1495 kes Correct VolCatBytes bug from media patch.
1496 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1497 in the case of orphaned records.
1498 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1499 and File records in 300K chunks to be more efficient. This
1500 idea came from Juan Luis Frances (if I remember right).
1501 kes Apply Eric's scratch patch that moves a purged Volume to
1502 the RecyclePool. Question: how is RecyclePool set? what
1503 happens to the ScratchPool?
1504 kes Apply Eric's media patch that collects read/write media
1505 times as well as byte counts. This patch requires a
1506 simultaneous upgrade of the DIR and SD. Note, there
1507 should be some way to turn off timing. I'm not sure
1508 times are in Bacula units.
1509 kes Apply Eric's batch-insert patch.
1511 kes Update projects list.
1513 kes Implement Include/Exclude file lists in FD as dlists using
1514 the new dlistString class. This permits efficiently having
1515 large include/exclude lists and completes project Item 25.
1516 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1517 console is authorized to cancel the job. This fixes bug
1519 kes Modify SD so that the VolCatJobs medium record is updated
1520 at the beginning of a Job rather than the end. This
1521 fixes bug #775 where exceeding MaxVolJobs caused jobs
1523 kes Added a mutex around getting and setting Volume information
1524 so that multiple simultaneous jobs will single thread.
1526 Switch to using Subversion
1527 kes Remove src/pygtk-console/ from configure
1529 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1530 plus the entrypoints.
1531 kes Apply patch supplied that corrects debug print
1532 in canceling jobs for max run time. Supplied as
1533 part of bug #621, which was previously fixed.
1535 kes Test on job_canceled() and sd_msg_thread_done inside
1536 loop starting the message thread to avoid a race condition.
1538 kes Remove rl_catch_signal from console.c as it conflicted
1539 with the header definition. Fixes bug #765.
1540 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1542 kes Clarify some stored/acquire messages to indicate if the
1543 problem is with read or append.
1545 kes Fix memory leak with storage ids in cats/sql_get.c
1546 kes Terminate watchdog earlier to avoid reference to released
1547 memory -- reported by Jason Austin.
1548 kes Move closing the database from jobq.c to the director daemon
1549 termination routine. This fixes memory leaks for shadow jobs
1550 (i.e. migration jobs).
1551 kes Free up the unique jobid chain items in migrate.c. This fixes
1552 a memory leak problem.
1553 kes Convert some ugly looking for statements to use foreach_alist
1554 in findlib/find.c. This will facilitate converting the structures
1555 to use dlist (for large include/exclude lists).
1556 kes Fix a bug in the btree.c and btree.h routines, then rename them
1557 rblist and add them to be built in src/lib. Include some new
1558 methods written by Rudolf Cejka that make the code more readable
1559 (hides some of the ugly casting).
1560 kes Add set_next() and set_prev() methods which make the code much more
1561 readable. Also add a new dlistString class that facilitates storing
1562 strings in dlists. To be used in the large include/exclude lists.
1563 kes Make some trivial modifications to lib/tree.h that use rblist
1564 rather than dlist for storing the tree links. This was suggested
1565 by Rudolf Cejka. The result of this is that the restore tree now
1566 uses red-black binary trees rather than simple linked lists. This
1567 should give rather dramatic speed improvements for directories
1568 contining large numbers of directories/files (more than 10000).
1570 kes Fix maxruntime bug #621.
1572 ebl Implement the include JobID in spool file name project.
1573 kes Reorder projects file in order determined by Jan 2007 vote.
1574 kes Implement item #12 on project list -- quick release of FD by
1576 kes Fix open of SQLite3 db where user does not have write permission
1577 so that DIR does not crash. Fixes bug #761.
1579 kes Add back missing @ in Win32 Makefile.
1580 kes Change 'Device not configured to autolabel' from INFO
1582 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1583 which should restart an indefinite # of times.
1584 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1585 other DIR specifications.
1587 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1588 Fix path quoting in SQLite scripts.
1589 Fix problems with SHGetFolderPath.
1591 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1593 kes Fix Job restart on error bug that promotes an Inc to a Full
1594 backup. This should fix bug #755.
1595 kes Add qt-console and first cut of code.
1599 kes Fix Bacula->Documentation link on Win32 to point to index.html
1600 instead of bacula.html. Fixed bug #750.
1601 kes Return JobId in db_get_job_record() when JobId==0. This should
1603 kes Do not release source pointers when restarting a failed job.
1605 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1606 This *should* fix bug #747.
1607 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1610 kes Modify USTORE constructor to set an empty store_source string,
1611 and don't copy the store_source string in a cancel. Hopefully
1612 this will fix Arno's seg fault, bug #744.
1613 kes Add back code to disable conio in configure. Fixes bug #743.
1614 kes Correct the Options scanner in the FD to correctly handle
1615 SHA1 option, which was eating the next option. Reported by
1617 kes Add code to indicate when the SD is spooling, spool wait, and
1618 despooling as requested by Alan Brown.
1620 Version 2.0.0 released: 4 January 2007