1 Technical notes on version 2.4
5 kes Fix seg fault in Dir during estimate command with no level value
6 given. This fixes bug #1140.
8 kes Add message to migration job when the target job is already migrated.
13 kes When a migration job actually runs, re-check the Job record
14 and skip if the job is already migrated. This should
15 significantly reduce the problems with bug #1129.
17 kes Break the do_swapping into do_unload, do_swapping, and
18 do_load. It is much more logical that way.
19 kes Implement a set_dcr_from_vol subroutine in acquire.c for
20 reading volumes. This allows the dcr to be refreshed after being
21 zapped when the wrong volume is mounted.
22 This should fix bug #1126 -- During multiple tape restore, bacula
23 does not ask for physical tape change, but rereads same tape
25 kes Apply patch submitted for bug #1107 with a small modification.
26 This fixes a bug where bcopy copied too many records.
27 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
29 kes Make the default bat restore Pool be Any. This fixes bug #1118.
32 kes Fix bug #1125 which reports a SD crash at the end of a tape
33 during restore. It was a debug statement that should not be
36 ebl fix #1034 by setting big timeout on mysql connections
38 kes Do partial integration of the Win32 bat build created by Eric.
39 kes Fix bat not to block.
41 kes Ensure that SD tried to mount a volume not in an autochanger
42 at least once before asking for operator intervention.
43 kes Fix a pthreads bug in the Win32 pthreads emulation code.
47 kes Clear in-use bit on vol when unused while swapping.
49 kes Remove sleep at end of ./bacula
50 kes Clear hash packet for hardlinked files correctly. This corrects
51 a long standing bug where hardlinked files selected individually
52 would occasionally not be restored.
54 kes Apply Eric's patch to ensure that autoprune does not return
55 a Volume not in the autochanger unless requested to do so.
56 kes Correct bat restore display of multiple drives. This fixes
58 kes Do find_a_volume() each time an unload is done. This
59 fixes the failure of maxvol2-test.
61 Release Beta version 2.4.1-b2
63 kes Use Qmsg() in job.c watchdog callback.
65 kes Release main control rwlock if ABORTing.
66 kes Make watchdog connect timeout queue messages rather than sending
67 directly to avoid lock conflicts with the real thread.
68 kes Remove const char that causes problems with Python, which has
69 older 'incorrect' headers.
70 kes Add const char in dbd.c to avoid compiler warnings.
72 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
73 mt. This fixes bug #1116.
74 kes Fix failure of 2drive-concurrent-test. Always read label;
75 clear_unload() only after drive is defined in acquire_for_read().
77 Release Beta version 2.4.1-b1
79 kes Back out bad src/lib/base64.c change.
81 kes Generally clean up the manual tape loading code. The main
82 conceptial change is that when a volume is marked to be unloaded,
83 its volume name is retained, and it is only marked as unloaded
84 when either the autoloader says it is unloaded or another tape
85 is read on that drive.
87 kes Fix a recycling problem with two autochangers reported in bug
88 #1106. This may also (unlikely) fix a second recycling bug as
90 kes Fix a SD lock volumes deadlock problem reported in bug #1100.
92 kes Fix format problem in bscan output reported in bug #1105.
94 kes Copy more data when restarting a job so that run
95 overrides are kept. This should fix bug #1094.
96 kes Backport updates to jobq.c where possible.
98 kes Fix bug where SD did not ask operator if the device could not
99 be opened. Reported by Eric.
101 kes Add dbuser to DIR conf file (replaces user).
102 kes Add --with-db-password to ./configure
103 kes Fix regress to handle db_password.
104 kes Fix a couple of pedantic compiler warnings.
105 ebl Fix bug when starting a restore on a storage that doesn't
106 have the requested MediaType.
108 kes More work on word alignments -- eliminate all ints from
109 the configuration routines.
111 kes Fix bug reported by Scott Barninger where the bacula script
112 refers to scripts in the wrong directory. Needed to meet the
113 requirements of recent FHS location changes.
114 kes Fix word alignment problem on non-Intel 64 bit machines
115 such as Solaris. This should fix bug #1097 -- bus error in SD.
117 kes Add missing win32/patches/wxWidgets.patch to 2.4 repository.
119 Release Version 2.4.0
121 kes Update version to reflect the magnitude of the SD changes.
123 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
124 This fixes bug #1095.
126 kes Add create_postgresql_database.sql to Win32 installer. Should
127 fix problem reported by Juilio Monteiro.
128 kes Get correct slot when auto unloading a device. This fixes bug
131 kes Fix multiple media restore.
132 kes Make DEVICE Slot private and access it via a method.
133 Allows better control over when it is set and cleared.
134 kes Fix possible seg fault if SQL error.
136 kes Add debug code to SD.
137 kes Fix renaming a Volume, which used the wrong Volume name.
139 kes If operator has rewind tape, print warning, release tape and
140 try once more. If tape is positioned somewhere, something went
141 wrong, so mark the tape in error and try once more. Previously
142 this error was fatal, now it produces an error message.
143 kes Ensure correct volume name displayed during restore
144 kes Ensure that Volume is mounted for restore.
146 kes Fix a few more Coverity reported problems.
148 Beta Release Version 2.2.10-b4
150 kes Enhance a couple of SD debug messages.
151 kes Tweak unload flag setting and ensure it is set during swap.
153 ebl Fix #1091 about bad output in estimate command.
155 kes Modify autochanger locking to attempt to avoid race
157 kes Make sure device not busy before doing label command.
158 kes Display open() errors except when polling. Previously too
159 many were suppressed. This should fix bug #1070.
160 kes Fix Win32 reparse points. Bacula will not recurse into any
161 reparse point directory, including mount points, unless the
162 directory is explicitly mentioned at the top level (same as
163 with Unix). A file that is linked to another file will be
164 backed up -- much as Unix does for hardlinked files.
165 This fixes bug #1041.
167 kes Remove double quotes from ChangeLog and ReleaseNotes
168 kes Remove StorageId test when pruning and recycling (Eric's changes).
169 kes Remove old form of locking when getting volumes -- causes deadlock.
171 kes Fix buffer overruns detected by Coverity.
173 Beta Release Version 2.2.10-b3
175 kes Tweak joblog display.
177 kes Implement --without-qwt
178 kes Fix layout of restore tree dialog
179 kes Add configure bat QWT libraries, so that bat can be built
180 with or without the QWT libaries.
182 kes Apply batfix bat cleanup patch from Riccardo.
183 kes Make sure we unload the right slot when swapping.
185 kes Improve SD reserve debug code.
186 kes Testing an improvement to free up volumes no longer in use.
188 Beta Release Version 2.2.10-b2
191 kes Rework SD acquire for read to handle autochanger Volume
193 kes Implement regression that explicitly tests swapping a Volume
194 from one drive to another.
195 kes Enhance disk-changer to detect most error conditions.
196 kes Fix SD code so that it properly swaps a Volume between drives.
197 This fixes bug #1083.
199 kes Prevent a Volume that is being swapped from being freed from
200 the volume list. This will most likely fix, at least partially,
202 kes Fix strippath so that it does not get a buffer overrun and crash FD.
203 This fixes bug #1078.
204 kes Make inability to change owner/group when creating a dir only a
205 warning rather than an error.
207 ebl Fix SQL query in migration code
209 kes Force unload of volume when wrong volume mounted in SD.
211 kes Fix bat seg fault at termination.
212 kes Add Bacula generated version to bat about box.
214 Beta Release Version 2.2.10-b1
216 kes Permit multiple simultaneous restores -- experiment.
218 kes Backport development stream SD reservation system changes.
221 kes Move final volume swapping code to DCR method and
222 call it from acquire_for_read().
223 kes When wrong volume is mounted during read, unload_autochanger.
225 kes Stop searching for Volumes in SD askdir if DIR returns the
226 same volume name twice in a row.
228 kes Tweak the swap Volume from one drive to another code so that
229 it now seems to work.
230 kes Resolve several problems with recycling that broke the new
231 code (these problems are in 2.2.9 as well).
232 kes Remove the volume lock when calling the sysop code.
233 kes Don't mark a reserved volume with no writers as unused otherwise
236 kes Rework class structures for VOLRES, DCR, and DEVICE to make
237 the method names a bit more logical, and for more logically
238 handling the responsibilities.
240 kes Remove redundant code in terminating the scheduler that just
241 causes a seg fault in many cases.
242 kes Cleanup releasing a volume and make it a DCR method.
243 kes Improve algorithm for detecting pre-reserved volume and
246 kes Tweak volume swapping code so it works.
247 kes Correct name overloading in mount.c
248 kes Replace released flag in VOLRES with reserved and add access
249 methods for the VOLRES class.
250 kes Prevent volume from being released while being swapped.
251 kes Refactor parts of stored/mount.c
253 ebl Add sanity checks for VolWriteTime and VolReadTime
254 ebl Take care of bad clock changes while computing VolWriteTime
255 and VolReadTime. This should fix or limit #1066
256 kes Correct error string numbers in dird/catreq.c
257 kes Restructure reserving, acquiring, and mounting volumes. Calls to
258 autochanger are deferred for mount.c -- simplifes the code.
260 kes Do not prune any running job. It just fails the job.
261 kes Lock the volumes when changing dev->reserved_device and marking
262 the volume unused otherwise the device can get reserved by
263 another job before the volume is released, thus blocking it.
266 Beta Release Version 2.2.9-b7
268 kes Close bat console windows first to eliminate error message
270 kes Remove useless code in Scheduler that causes seg fault on
272 kes Correct some SD catalog request error messages.
273 kes Don't allow pruning of any running job.
274 kes Turn off code in read_record that causes a seg fault in the SD
275 when reading past an EOS_LABEL.
276 kes Turn off unloading the autochanger in reserve.c as it just
278 kes Lock volumes when unreserving a device.
279 kes Do not mark volume unused when recycling.
280 kes When acquiring, don't mark volume unused if it is reserved (busy).
282 Beta Release Version 2.2.9-b6
284 kes Eliminate ./configure warning on po directory
285 kes Fix bug #1063, reuse of freed ptr in list nextvol.
286 kes Release regex compile buffer in filed/job.c
287 kes Add proper type of const char in sql_create.c
288 kes Turn off debug in daemon termination routines
289 kes Move free_volume_list() before devices are freed in stored.c
290 kes Fix reference to uninitalized stack variables in bregex.c.
291 This should correct bug #1067.
293 kes Fix possible seg fault in SD when freeing a volume entry.
295 kes Apply patch from bug #1069 that corrects spurious error messages
296 when ACLs enabled on SGI but no ACL exists.
297 ebl Fix a storage deamon segfault at debug level 500.
299 Beta Release Version 2.2.9-b5 -- not released
301 Beta Release Version 2.2.9-b4
303 kes Re-enable code to remember last volume mounted on a non-tape
305 kes Add patch supplied in bug #1068 that fixes a SD crash when using
306 a Virtual autochanger.
307 kes Generate correct JobMedia records during spooling/despooling when
308 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
309 <tih@hamartun.priv.no> for excellent analysis and testing.
311 Beta release Version 2.2.9-b3
313 kes Rework certain SD locking based on gdb tracebacks of deadlocks
314 sent by Eric. This code now uses only the volume_lock() rather
315 than the reservations lock when at EOM and acquiring a new
317 kes Ensure only one exit point in several subroutines.
319 Beta release version 2.2.9-b2
321 kes Fix to initial tape drive open to release the volume name
323 Beta release Version 2.2.9-b1
325 kes Fix to JobMedia fix.
326 kes Fix bug pointed out by Peter Much that causes the StorageId to
327 be updated when reading a tape (during migration, it could have
328 been incorrectly set to the write StorageId).
330 kes Implement autostart scripts for Debian
332 kes Fix mtx-changer.in for broken Debian mt program.
334 kes Massive commit of all fixes and back ports to create 2.2.9
336 kes Apply doc fix from bug #1062.
337 kes Resolve crash and improper restore wx-console Win32 restore
338 GUI. Fixes bug #1065.
339 kes Update Win32 wxWidgets to latest version.
340 kes Attempt to do correct handling of Win32 mount points. Should
342 kes Fix Win32 FD backup/restore memory leak due to improper termination
343 of BackupRead/Write. This fixes bug# 1038.
344 kes Add const to AIX prototype for initgroups()
346 kes Undo bug #1047 heap overrun fix as it is not correct.
348 kes Fix creating first JobMedia record during Migration to include
349 proper index. This caused slow restores of migrated jobs.
351 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
352 and do not strip paths on symbolic links.
353 kes Set catalog backup database and user name from values specified on
354 the ./configure line.
355 ebl Apply patch to correct bug #1031, about wrong pool source information
358 Release Version 2.2.8
360 kes Apply patch from Martin to correct bug #1040, bscan sets existing
362 kes Fixed important spelling error in doc -- bug #1045.
364 kes Move initialization of read/write res lock earlier in the code.
365 This fixes the crash with a null conf file. This fixes bug
367 kes Redefine CURES in lib/parse_conf to be URES and move it all
368 into lib/parse_conf.c -- this responds to bug #1042, but does
369 not fix it. The fix is not to compile with FORTIFY_SOURCE.
370 kes Backport fix de-referencing a NULL pointer in the scanner from
371 the trunk SVN. I don't think this was reported as a bug.
373 Beta release Version 2.2.8
375 kes Re-enable the new job code editing (%f).
377 kes Fix bsnprintf for float point numbers. I broke recently when
378 parameterizing some variables. This fixes bug #1036.
380 kes Move Heartbeat documentation from Job to Director resource.
381 This fixes bug #1033.
383 kes Fix existing switch drive SD code to call autochanger to release
384 any old volume. This must be done to keep the autochanger from
385 releasing subsequently newly reserved volumes in doing a close().
386 This should possibly fix bugs #1032 and #1018.
387 kes Apply big backport of current SVN SD code that corrects a number
388 of race conditions. This is a first step in fixing bug #1018.
390 ebl Fixes bug #1028 where "Selection Type" option was not usable
394 Release Version 2.2.7
396 kes Partial back out (disabled) %f job code editing because it
397 does not build on Win32.
398 kes Fix seg fault Frank Sweetser reports in regression testing
399 on his systems. The problem was that the original author of
400 bsnprintf.c did not take into account the side effects of
401 using ++x in the argument to a #define.
403 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
404 that implements double quoting include names in conf files,
405 and also allows piping input by having the first character
406 be a vertical bar (|).
407 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
408 that implement %f in RunScripts to pass the FileSet name.
409 kes Skip leading | when lex input comes from a pipe as suggested
410 by Michael Stapelberg <michael@stapelberg.de>.
412 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
413 Nerijus Baliunas <nerijus@users.sourceforge.net>
415 kes This patch corrects a problem where the maximum concurrent storage
416 jobs counter gets out of sync during restore jobs causing jobs to
417 'wait on max Storage jobs'. This patch fixes bug #1009.
419 kes Add new include to postgresql.c suggested by Marc Cousins so
420 that it compiles correctly with pgre version 8.3. Also fix
421 misuse of %x with pointer (should be %p).
423 kes This patch fixes bcopy so that it produces correct Volumes.
425 kes This patch eliminates spurious output to the console during a VerifyVolume
426 job that contains encrypted data. It fixes bug #1024.
428 kes This patch prevents the 'status dir' command from trying to use a scratch
429 volume and possibly moving it from one pool to another. This patch fixes
432 kes Fix --archivedir addition to configure. Replace it with
433 --with-archivedir in configure.in This fixes the regression
435 kes This patch fixes bug #1012 where the job is canceled because
436 of Max Run Time exceeded when the job has not yet started.
438 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
439 one 'part' to write. Instead of each part being stored on disk,
440 written to DVD, then deleted from disk, all parts are written to disk,
441 and only the last is written and deleted from disk.
443 kes Correct typos in disk-changer.in
445 kes This patch fixes the status command to include the formating string for
446 JS_AttrInserting. It fixes bug #1021.
447 kes This patch should fix the Mac OS X build problem on the latest
448 Darwin, where sys/types.h was not included correctly (apparently
449 due to a change in the Mac headers). The solution was to explicitly
450 ensure that it is defined for the ./configure.
451 This patch also has a rebuild of configure that includes the Debian
452 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
453 kes This patch should ensure that queued messages to the console are
454 displayed as soon as possible. It should fix bug #1007, but has been
455 reported not to work.
457 kes This patch fixes the infinite loop when trying to increase the
458 maximum number of volumes in a Pool during the add command.
459 This patch fixes bug #1008.
461 Release Version 2.2.6
463 kes Get fix for joblist bug in bat from trunk.
465 kes This patch fixes bug #1003 where putting the message output from
466 a Verify job into the catalog results in a recursive loop. The problem
467 seems to show up only with postgresql (to be verified).
469 kes Fix bug #942 where lots of emails where generated when the heartbeat
470 interval was low and Bacula wanted a different tape from the one in
473 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
474 which was updated during a restore (or a reading migration) bug #982
476 ebl Use qmake-qt4 instead of qmake when available (debian system).
478 kes Add a security warning to src/cats/make_catalog_backup.in indicating
479 that passing the password via the command line (arg 3) is insecure.
480 This responds to bug #990 (it doesn't fix it).
481 kes Apply 2.2.5-postgresql-errors.patch
482 kes Remove unneeded File table index on JobId, which is already
483 present as the first index of another multi-index.
485 kes Set default debug_level to zero. This corrects bugs #991 and #993.
486 kes Fix a crash in bat when it cannot connect to the Director for example
487 if the Director is not running.
489 kes Activate Close button on tray-monitor window. This fixes
492 kes Fix spurious warning message printed when creating a volume with
493 a LabelFormat. This fixes bug #976.
495 Release Version 2.2.5
497 kes Add JobId in place of Job name in all the Jmsg() output.
498 kes Correct the APP_DESC for the Win32 storage service (remove an e).
500 kes Add new SD despooling attributes and Dir inserting attributes
501 job status codes. This fixes bug #961.
502 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
504 kes Fix doc issue. This fixes bug #963.
505 kes Fix listing performance problems in bat. Pointed out by
507 ebl Fix replace on restore. This fixes bug #969
508 kes Fix bat code that tests for Win32. This should fix bug #968
509 kes Query 5 list wrong Vol after migration. This fixes bug #960
511 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
512 in back porting from 2.3.x
514 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
515 The details are included in the notes in this file.
517 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
518 messages; it fixes a problem opening the SQLite3 database when multiple
519 simultaneous jobs were running; it fixes a bug with certain versions of
520 MySQL where batch inserts failed because of table name character case
521 (upper/lower) differences.
522 kes Fix race condition that drops final block written to volume.
523 This happens in rare cases with multiple simultaneous jobs
524 when the Volume fills. This fixes bug #964. May be related
525 to bug #935 and possibly #903.
527 kes Fix FD->SD authorization failure, which was due to spurious
528 wakeups from a pthread_cond_timedwait(). Simply check the
529 predicate before continuing. This fixes bug #953
530 dvl Add new configuration item --archivedir
531 dvl Adjust regression tests to use tmp not /tmp. This will allow
532 multiple concurrent runs of the regression tests.
534 kes Eliminate more strerror() and replace with bstrerror().
535 kes Remove BSD getopt and replace with unrestricted IBM version.
536 kes Fix Win32 build for changed calling sequences.
538 kes Fix FD->SD authorization failure, which was due to spurious
539 wakeups from a pthread_cond_timedwait(). Simply check the
540 predicate before continuing. This fixes bug #953.
541 kes Add const char where needed (more to do).
543 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
544 kes Don't overwrite error message in check_tables_version.
546 kes Unlock batch insert tables with same calls used elsewhere.
547 kes Allow starting 59 jobs a second.
548 kes Make SD session key more random.
549 kes Add retry for SQLite opening db if it fails. Probably helps
551 kes Suppress extra error messages during batch insert failure.
553 kes Put some FD auth code on dbglvl rather than fixed.
554 kes Return insert attributes error message in db msg buffer to avoid
555 false error messages. Helps fix bug #966.
556 kes Separate batch init error messages. Probably helps fix bug #966.
557 kes If Dir gets an error during inserting attributes, cancel SD.
558 This reduces unnecessary error messages.
560 ebl Cleanup batch insert code. Probably fixes bug #965.
562 kes Turn off some code when batch insert not enabled.
563 kes Edit FD name in connect error messages.
565 kes Add code to handle tray monitor separated from Win32 FD.
566 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
568 kes Fix ANSI tape labeling. This fixes bug #954.
569 kes Increase the max block size to 4MB fixes bug #957.
570 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
571 is not properly mounted (recognized) during a poll.
572 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
573 Job that has differences reports Verify OK.
574 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
576 Release Version 2.2.4
578 kes Increase size of name string when FD making connection to SD.
581 kes Add waits to multiple exit detection code to try to force pid
582 file to always be deleted.
583 kes Restore good dev.tar.gz to rescue set appropriate binary property.
585 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
586 trying to switch drives by checking for blocking before unblocking.
588 kes Cancel storage daemon in all cases where FD reports error. This
589 should fix virtually all cases of bug #920.
591 kes Fix error message that was clobbered when Dir tells SD it does not
592 have write permission on Volume. This should fix a minor point
593 in bug #942, but not the main problem.
594 kes Add code to cancel job in SD if FD connection fails. This should
596 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
597 kes Fix migration code to get correct Volume name with multiple volumes
598 by skipping |. Fixes bug #936.
599 kes Implement patch supplied by Landon to fix bug #944 where using
600 TLS with bconsole uses 99+% of the CPU.
601 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
603 kes Move patches into patches directory.
605 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
608 ebl Using 'm' in bconsole will show messages like before,
609 and not memory usage.
611 Release Version 2.2.3
612 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
615 kes Fix bug #935, and probably also bug #903 where files were not
616 restored. MediaId was not properly set in JobMedia record after
619 kes Add ./configure search in qwt-qt4 for qwt package
620 kes Apply Martin Simmons patch that should turn off the new API usage
621 when batch insert is turned off allowing building on older
624 Release Version 2.2.2
626 ebl Detect if new PosgreSQL batch insert API is present.
627 kes Correct incorrect mempool call causing Director crash.
628 sb Update spec files for 2.2.1 release
630 Release Version 2.2.1
632 kes Update POTFILES.in
633 kes Cleanup a few underquoted AC_DEFUNs in configure
634 kes Apply patch from Martin Simmons that adds a test for va_copy to
637 kes Fix bug #921 by increasing the number of tries to create a new volume
639 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
640 can be called multiple times. Implement a version for machines
641 without va_copy() that gets a big buffer.
643 kes Integrate more portable zone offset code into bsmtp.c
644 Submitted by Attila Fülöp.
646 kes Fix bad SD->FD return status reported by
647 (James Harper) <james.harper@bendigoit.com.au>
648 ebl Fix a bug in read_close_session which return random status
649 thanks to James Harper
651 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
652 and directory names during restore of single file/directories.
653 kes Add sanity checks to .sql command when string is empty. Hopefully
654 that will resolve Dirks Director crash.
656 kes Apply patch submitted by Martin Simmons that corrects a seg fault
657 in the bsmtp chat subroutine when debug is >= 10.
659 kes Fix Director crash when running bat SQL queries.
660 kes Add David's notes on Item 8: Copy pools.
662 kes Rework projects file to be current and ready for a vote.
663 kes Enhance lex scanner error message.
665 kes Tweak LICENSE file to mention BSD code.
666 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
667 if specified on the ./configure.
668 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
669 This class is intended to allow us to open a second bsock to the
670 Director while in the restore subdialog.
672 kes Fix configure to create bat Makefile before creating dependencies.
673 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
674 kes Add a tooltip to the tray monitor.
675 dvl Set the Director's PID file before dropping privs. This fixes
678 kes Update AUTHORs file
679 kes Increase the default max concurrent jobs to 20 in FD and SD to
680 correspond with the default .conf files.
681 kes Rewrite the Win32 service routines. This eliminates the 3 copies
682 some different, of the same file created by RN when porting the
684 kes Rearrange some of the Win32 directories and the placement of the files
686 kes Set DEVELOPER flag in version.h
688 ========================================================================
689 Release Version 2.2.0
691 kes Apply a second doc patch from Marc.
692 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
693 improves the tips section that discusses how to setup multiple
696 kes Update bat README file.
697 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
698 corrects a typo in the Recycle status check in db_find_next_volume().
699 This will probably fix a number of annoying problems with multiple
701 kes Modify most of dird/msgchan.c to use bsock class calls rather than
702 bnet calls -- no functionality change.
704 kes Modify the Verify output to specify if files are missing on
705 the Volume(s) or disk. Fixes confusion in bug #916.
706 kes When more than one Volume is read in a migration job, the last
707 Volume bytes reported are from the last read volume rather than
708 the last written volume. Fixed. This fixes bug #910.
709 kes Fix display of Recycle flag after update volume=foo recycle=yes.
710 It previously printed New Recyle flag is: no. This fixes bug
713 kes Correct seg fault when switching tape drives during restore.
714 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
715 be used until after 2.2.0 release.
717 kes Remove fnmatch() in SD that permitted wild card specifications.
720 kes Fix %g in filename returned by SQL for browse tree reported by
722 kes Fix configure so that it puts config.out in the cwd rather than
724 kes Attempt to fix the locking problem reported by Eric in bug #906.
725 kes Make berrno class to leave errno unchanged after constructor call.
726 kes Make bnet_server use the heap rather than the stack to allocate
727 its socket fd pointers to avoid a crash at termination. Problem
728 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
730 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
731 and putting it in depkgs-qt along with Qt4.3.
733 kes Rework code in acquire.c that switches drives for reading when
734 the Media Type does not match. This should fix bug #906
736 ebl Fix a director segfault during job setup #907
737 kes Correct seg fault in postgresql when first operation returns no
738 rows. Fixes Dirks File browser problem seg fault with bat.
740 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
741 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
744 kes Implement PopUp YES/NO dialog for bat.
746 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
748 kes Correct RunScript to terminate job in FD on failure.
749 kes Change abort_on_error and AbortJobOnError to fail_on_error
750 and FailJobOnError in RunScripts.
751 kes Minor tweaks of code formating in RunScripts, principally to
752 avoid depassing 80 columns.
754 kes Eliminate one #ifdef Win32 in bsmtp
755 kes Implement grow tool to grow a file for testing very large databases.
756 kes Add big-vol-test to test Bacula seeking with > 5GB.
759 kes Modify find_next_volume() to return all values in Media record.
760 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
764 kes Update Release notes
766 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
767 Warning, in previous beta version, all media get from scratch keep their
770 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
771 This should fix bug #842. Made a note to look at removing the temp
772 files at the end of the install.
773 kes Add ability to mount and unmount a file device providing it is
774 marked as being removable and has the appropriate mount and unmount
775 commands defined in the Device resource. This fixes bug #830.
776 kes When applying a storage override, release all previous storage
777 definitions rather than just prepending the new storage.
778 This should prevent a good deal of confusion.
780 kes Implement ./configure search for qwt libraries.
782 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
783 Win32 FD. This should fix bug #893.
784 kes Remove an unnecessary beep in Win32 init code.
785 kes Update copyright dates in Win32 executable about boxes.
786 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
787 code with a BSD getopt.c and getopt.h.
788 kes Remove sched.h from the Win32 compat directory -- not used.
789 kes Remove the Exit menu item from the Win32 tray monitor. If you really
790 need to shut it down, do it through the services panel or the command
792 kes Remove some inappropriate Bacula FSFE copyrights.
793 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
794 kes Fix regress config non-portable test as pointed out by
795 Florian Heigl <florian.heigl@gmail.com>
796 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
797 as pointed out by Florian Heigl <florian.heigl@gmail.com>
799 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
800 Reported by Frank Sweetser.
804 kes Fix client-only build.
805 kes Integrate client-only fixes for bsys (initgroups) and conio from
806 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
807 kes Make arguments to get_scratch_volume() in same order as other
809 kes Rework the prune_volumes() subroutine so that after purging and
810 no volume found in desired pool, it will check for a scratch
811 volume. This prevents recycling the whole scratch pool.
812 kes Add code to status storage to print boffset_t (largefile support).
814 kes Move qwt (Graphics libarary for Qt4) to depkgs.
815 kes You now need a --with-qwt=<dir> to be able to build bat.
816 kes Update src/win32/cats/bacula_cats.def to include the new
817 db_get_query_dbids() call on Win32.
819 kes Correct a problem when selecting a scratch volume and moving
820 it to another pool that lost some columns.
821 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
822 kes Enhance Autochanger error messages to include Volume and device name.
823 kes Rework prune_volumes() code to take account of InChanger flag,
824 and to handle recycling volumes going to the Scratch pool and
825 current pool because the RecyclePool directive.
826 kes Implement a better and more efficient db_get_query_dbids() to
827 handle creating and passing back a list of DBIds.
831 kes Start work on new more efficient DBId subroutine. First use
832 will be for recycling volume to Scratch inchanger.
833 kes Increase number of JobIds in pruning from 1000 to 10000.
834 This to be replaced by above routine.
835 kes Begin implementation of building Qt4 on Win32.
836 kes Correct typo in fix I added for bad TLS shutdown.
837 kes Pull 2.0.3 patches into patches directory.
838 kes Update Release notes. Include qt-console in line count.
839 kes Update Projects file.
841 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
842 bug in migration code where a job that spanned two volumes
845 kes Implement new BST_DESPOOLING blocked state. Change from locking
846 during despooling in SD to blocking. This means that other threads
847 can work with the device structure, in particular the reservations
848 system while despooling.
850 kes Fix return in reservation message queue that missed clearing
851 the jcr lock (implemented 26Jun07 below).
852 kes Rename a number of dev methods to make locking function names
854 kes Document locking in lock.c. Move lock structures to new file
857 kes Move reservations message lock to lock jcr only this
859 kes Move main SD locking code into lock.c (new file).
860 kes Update Win32 build to include lock.c
864 kes Dirk committed the qwt library code for drawing graphs in bat.
865 kes Tweak install of qwt so that it is integrated with ./configure.
867 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
868 out by Eric (my typo).
869 ebl Fix configure.in to get batch mode enable
870 kes Return correct string from authenticate.cpp in bat when connecting
872 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
873 spurious line drops when using TLS.
874 kes Do not file reparse points when restoring a file that already
877 kes Implement Windows reparse points -- similar to directories, but
878 we do not descend into it. This is a first cut. They seem to
879 be backed up, but restore is not yet tested.
880 kes Remove restore_blocking in tls code when shutting a socket to leave
881 it in blocking mode. Hopefully this will fix the encryption bug
882 reported by Frank Sweetser.
883 kes When opening a file for backup, tell the OS that we are going to
884 read it sequentially -- optimization.
885 kes Change variable names in authenticate_director() to not conflict
886 with member names in bat. Caused great confusion with compiler,
889 kes Queue openssl error messages in case of comm problem.
890 kes Do shutdown() call if socket terminated.
891 kes Remove some duplicated code in tls.c
892 kes Move more of the bsock member variables into private and access
894 kes Add Frank Sweetser's tls-test to the regression suite.
896 kes Add Swedish sv.po file
898 kes Don't print clock skew message in FD if less than 3 seconds diff.
899 kes Add a bit of VSS info to status client.
900 kes Implement a first cut of Vista VSS, using Win2003 code.
904 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
905 loaded tape but uses first drive).
906 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
907 This was indeed a Win32 issue.
909 kes Simplify search of autochanger for in-use Volume.
910 kes Fix exit condition of check for in-use volume. kes Remove
911 inappropriate my_postgresql_free_result() in db_close()
913 kes Fix bad return in FD when encryption signature not found.
914 Probably caused a crash.
915 kes Inhibit missing encryption signature error messages for
916 file types where no signature computed.
917 kes Correct inverted check on autochanger in reservation system.
918 kes Tweak debug code in autochanger reservation.
920 kes Add some additional locking in the cats directory in subroutines
921 that modify packet variables called from batch insert.
922 kes Rework how dcrs are allocated. new_dcr() can now be called
923 with an existing pointer, and it will simply clean it up.
924 This allows the reservation system to test various different
925 devices, and will permit easy device changes.
926 kes A bunch of changes all over to handle new new_dcr() calling
928 kes Work more on the Volume management in the SD. Remember Volumes
929 for tape drives and for autochangers (even virtual disk changers).
930 kes When looking at the Volume list to reserve a drive, handle
931 autochanger names correctly by interating through the changer
932 devices. Also call the Director to see if a Volume is suitable
934 kes Fix some bugs in bscan. Make sure all media records are written.
935 Make sure that valid JobMedia records are written for disk files.
936 Previously they were completely wrong.
937 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
938 that the URLs don't change and so that the developers will all
939 work off the same copy. Rebuild from scrach.
940 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
944 kes Fix seg fault in FD from incorrect digest size.
945 kes Fix argument to non-OpenSSL crypto.c subroutine.
949 kes Remove a few malloc()s from the encryption code.
950 kes Use the class calls to bsock in filed/backup.c and restore.c in
951 place of the old bnet_xxx code.
952 kes Implement code that does an on the fly calculation of the
953 signing digest during restore of encrypted files. It makes
954 a best guess at the algorithm, and if it is not correct, will
955 then revert to the old code which reads the file after it is
957 kes Implement at least one missing crypto stream in stream_to_ascii()
958 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
959 #877 where a reload with bad syntax causes Dir to exit.
961 Cut: 2.1.14 beta (not released)
963 kes Do not free a volume on a tape drive until another volume is
964 mounted and read, or the autochanger unloads the volume.
965 This should help the SD re-use volumes that are already mounted,
966 and should fix bug #886.
967 kes Apply patch from user brettedgar that allows gnome2-console include
968 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
969 kes Apply patch from Lucien Weller that fixes day of week calculation
970 because of DST flag problem. Fixes bug #887.
972 kes Move find_next_appendable_volume() to after acquiring a valid device
973 in reserve.c. This fixes bug #864 -- confirmed by reporter.
975 kes Unable to reproduce bug 872. However added additional testing for
977 kes Bug #874 resolved by documenting SQLite limitations.
978 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
979 kes Bug #881 resolved by removing typo in mtx-changer script.
980 kes Made Frank Sweetser's wiki the official Bacula wiki with his
981 approval. Added a link to the wiki on the web page, and implemented
982 a backup from http://paramount.ind.wpi.edu
984 kes Fix update allfrompool to pass pool name.
986 kes Convert to pure GPL v2 license.
987 kes Fix sscanf problems reported by Peter Buschman that caused
988 a bus error on Solaris.
989 kes Rework (simplify) the select prompt in bat.
990 kes Move get_jobid_from_tid() into lib and create a
992 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
993 should definitely fix the problem of lost error messages in the
995 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
996 kes Eliminate tcpd.h from the project. Enclose the #include from the
997 library with extern C ...
998 kes Add print of signal name when a signal is trapped.
1000 Release: 2.1.12 beta
1002 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1004 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1005 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1006 makes SQLit3 run 30 times faster, though a bit less safe.
1007 kes Implement --with-batch-insert in configure and detection of thread
1008 safe libraries. It is on by default, but turned off if no thread
1009 safe library (e.g. SQLite 2) is available.
1011 kes Fix Bacula PostgreSQL buffer overruns.
1012 kes Do better checking for NULL results returned from PostgreSQL;
1013 implement retry for failed queries; clear results buffer after
1014 failed query. Hopefully this will correct the PostgreSQL failures.
1016 kes Implement algorithm to handle only one appendable volume with
1017 Prefer Mounted Volumes = no.
1018 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1019 returned from a query.
1020 kes Make volume lock recursive.
1021 kes Implement an additional volume reservation algorithm that
1022 starts by considering all reserved volumes then uses the
1023 old brute force algorithm of searching the resources to
1024 find a suitable device.
1025 kes Add new reservations debug code and refine the old code.
1026 kes Update the win32/dll/bacula.defs file.
1028 kes Tweak reservations algorithm to permit a few more cases, i.e.
1029 volume reserved, but on different drive, ...
1030 kes Enhance SD status to include Pool and Media Type for drive in a
1031 more readable format (a bit longer).
1032 kes Fix PostgreSQL double free.
1034 kes Minor refactoring of restore decryption code.
1035 kes Add code to smartall.c to detect double free of a buffer.
1037 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1038 so that bsmtp will create a correct email address (mailbox only).
1039 kes Modify 'memory' command so that the buffers are listed as 'In use'
1040 to avoid confusion with Orphaned buffers.
1041 kes I reworked the OpenSSL include/lib flags to be handled in
1042 the standard Bacula way, which should fix bug #863 concerning
1043 non-standard OpenSSL libraries.
1045 kes Implement Help Browser window for bat.
1046 kes Fix reload bug that reset StorageId to zero.
1048 kes Fix TLS #ifdefing when TLS turned off.
1049 kes Ensure that when labelling a tape with Slot=0 that InChanger
1051 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1053 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1054 add DISTINCT (required by PostgreSQL).
1055 kes Implement BSOCK authenticate_director() method. Eventually will
1056 authenicate all daemons.
1057 kes Move several more functions into the BSOCK class.
1059 kes Add code to tell the OS that we no longer need a cached
1060 file that we were reading. In findlib/bfile.c. Also,
1061 only cache files that we are reading. Thanks to
1062 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1063 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1064 kes Implement script to automatically generate cats and dll .def
1065 files for Win32 dll.
1066 kes Update README.mingw32 to include new .def file generation.
1067 kes Correct typo in UTF-8 error message as reported by:
1068 jhernandez <julianhernandez@gmail.com>
1069 kes Add additional sm_check() code on debug level 1.
1070 kes Set default debug level to 1.
1071 kes Trap SIGABRT in attempt to get traceback.
1073 kes Reduce bat connect timeout from 30 to 15 seconds.
1074 kes More restructuring and implementing BSOCK class in place of
1076 kes Remove a few unnecessary malloc() tests in crypto code.
1077 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1078 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1079 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1081 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1083 kes Fix Verify InitCatalog. The attributes were not pointing to the
1084 correct saved location.
1085 kes Implement message callback so that GUI is sure to get all
1086 daemon messages. Currently displayed in a dialog in bat.
1087 kes Ignore SIGUSR2 (Bacula timer) in bat.
1088 kes Apply regress patch from bug #859 to allow regress to work
1089 with Solaris compiler.
1091 kes Begin adding TLS support to bat.
1092 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1093 clean up lex.c and make it more readable.
1095 kes Move more bnet functions into the BSOCK class.
1096 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1097 kes Complete change of berrno strerror() method to bstrerror()
1099 Release: 2.1.10 beta
1101 kes Cleanup incorrect email addresses in bsmtp.
1102 kes Make bat display initial messages rather than discard them.
1104 kes First cut of adding .mod to the run command.
1105 kes Implement auto display of messages in bat.
1106 kes Enhanced preferences to allow all Bacula output to be
1109 kes Try to make bsmtp date routines more generic.
1110 kes Fixed bug #856 autochanger documentation.
1111 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1112 kes Add new cats entry point so Win32 builds.
1114 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1116 kes Do better checking for the MySQL 64 bit libraries looking for both
1117 .a and .so libraries.
1118 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1119 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1120 kes Require the thread safe version of MySQL during configure. Thanks
1121 to Andre Noll for pointing this out.
1122 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1123 continuing in migration code.
1124 kes Apply implementation of tray-monitor font derived from gnome-console
1125 submitted by Andreas Piesk <a.piesk@gmx.net>
1127 kes Eliminate important memory loss in SQLite
1128 kes Fixed the batch insert MySQL thread specific data that was not
1129 being freed. See cats/mysql.c:db_thread_cleanup().
1130 kes Fix restore before command.
1131 kes Convert old hdr.name to name() in a few places.
1132 kes Implement update jobid command.
1133 kes Return all time_t dates in db_get_job_record()
1134 kes Stop watchdog in SD earlier.
1135 kes Put Pool just after Storage in please mount message.
1136 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1139 kes Update the po files.
1140 kes Fix Verify InitCatalog by making it cache attributes.
1142 kes Change name bacula-bat to bat for man 1 page to correspond to
1144 kes Check for client and store NULL pointers in status command. This
1146 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1147 kes Fix sign extended editing of %p.
1148 kes Clean out a little old #ifdefing in cats/mysql.c
1150 kes If time diff between DIR and FD is more than 600 seconds convert
1151 INFO message to WARNING.
1152 kes Implement heap size display in status for all daemons.
1153 kes Attempt to fix MySQL db open memory loss (not successfull).
1154 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1155 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1156 Query. This looks like a MySQL but but by doing extra releases,
1157 the memory goes away. This should fix bug #847.
1159 kes When backup fails, cancel SD before waiting for sd termination.
1160 kes If SD is waiting for FD to connect during cancel, wake up the
1162 kes Fix fsf code so that errno is correctly reported.
1163 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1165 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1166 so that Bacula doesn't later stumble into a seg fault.
1167 kes Use the term Restore Client in the restore Job report.
1168 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1169 the original job's FileSetId.
1170 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1171 spooling in migration jobs. Not yet tested.
1172 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1173 reading conf file from a pipe. However, do it with open_bpipe()
1174 rather than popen. Not yet tested.
1176 kes Fix an ugly bug where the VolCatBytes were getting updated
1178 kes Implement bconsole memory command that prints current memory
1179 usage, plus smartalloc dump.
1180 kes Clarify some error messages in backup, admin, and migrate.
1181 kes Shrink label dialog to smaller size.
1182 kes Invert Cancel OK buttons on restore to be OK Cancel.
1183 kes More strerror() to bstrerror() conversions.
1185 kes Start implementing bstrerror() in place of strerror().
1186 kes Stripping path -- seems to work.
1188 kes Prevent door and port files from being restored (mostly
1190 kes Free an unreleased buffer in compat code.
1191 kes Change console Job name from *Console* to -Console- to eliminate
1192 Win32 filename problems. Put Win32 path separator when creating
1193 Console file. This fixes bug #846.
1194 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1196 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1198 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1199 to force Win32 error message.
1201 kes First cut strip path. The data should be passed to the FD,
1202 but nothing is done with it yet.
1203 kes Enhance the digest and signature routines in the crypto
1204 library to accept a JCR and to use it to print error messages
1205 so that they will go in the Job report rather than the daemon's
1207 kes Simplify some of the verify signature code.
1208 kes Simplify a few of the alternative returns in the signature
1211 ebl Use only POSIX regex instead of GNU regex in breg.c for
1212 File relocation. It fix broken freebsd compilation.
1213 kes Convert all other Dir files to use new ua class message
1215 kes Tentative fix for missing digest signature in bug 807.
1216 kes Correct handle problem in new win32_ftruncate routine.
1217 kes Convert ua_purge.c and ua_update.c to use new ua class
1218 message routines for bat.
1220 kes Correct incorrect installation of LICENSE in Win32 installer.
1221 kes Display LICENSE at the beginning of the Win32 install.
1222 kes Attempt to correct the need for the png files to be installed
1224 kes Reapply my bat.conf install script in qt-console. I think I
1225 editted bat.pro instead of bat.pro.in and it was lost.
1226 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1227 the /var/lock/subsys for subsysdir. Also corrects typos in the
1230 kes First cut update job.
1231 kes Correct configure to include qmake of src/qt-console directory.
1233 kes Make restore job yes/mod/no print in one command so GUI works.
1234 kes First cut implementing backup and restore client.
1235 kes Correct editing in Verify output that caused a seg fault.
1237 kes Insure that bat.conf is not overwritten during installation.
1238 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1239 while I was implementing migration in March 2006 !
1241 ebl Cleanup file relocation, using char *RegexWhere instead of
1242 char *where + bool where_use_regexp
1243 kes Update some manpages and add bat manpage.
1244 kes Make a first cut at converting bacula.spec.in for bwx-console
1246 kes Apply patch from John Goerzen to add hostname as fourth argument
1247 to make_catalog_backup script.
1248 kes Fix typos I introduced into bsmtp.c
1249 kes Make pm_strxxx() routines handle input of NULL pointer. This
1250 is to protect from NULL pointers returned from SQL databases.
1251 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1252 kes Add more debug to FIFO code -- fix fifo regression test.
1254 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1255 kes Add thread timer to bnet_connect() to break from OS if wait time
1258 kes Update Win32 build to include new files, new symbols, and
1260 kes Implement socket level heartbeat (tcp_keepidle)
1261 ebl Commit File relocation patch
1262 kes Make bat have 'make install' target.
1263 kes Warn during install if old gnome-console binary found.
1264 kes Warn during install if old wx-console binary found.
1265 kes Add -8 option to bsmtp command line to add content type utf-8.
1266 Fixes bug #809. (Character coding problem in bsmtp).
1267 kes If < is found in target (from, to, cc) then do not enclose the
1268 target in < > in bsmtp. Fixes bug #772 (malformed address).
1269 kes When printing certain items in dbcheck, stop after 300000.
1270 Fixes bug #822. (dbcheck loops).
1271 kes Incorrect status in Dir after waiting for mount with poll set.
1274 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1276 kes Print waiting to reserve a device every 5 mins.
1278 kes Don't call close_part in label.c if tape and relabel.
1279 kes Don't free volume if busy in close() -- should help with
1281 ebl Fix #824 RunScript bug (After script could be execute twice)
1282 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1283 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1284 Add a regression script to test RunScript
1286 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1289 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1290 deprecated. No additional bugs will be fixed, and they will be dropped
1291 in a future release (probably 2.4.0).
1292 kes Change name of wx-console to bwx-console to make it more Bacula
1294 kes Change the name of gnome-console to bgnome-console to make it
1297 kes Some time in March, a Feature Request with patch from Jorj Bauer
1298 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1300 The ability for the director to validate a Client (FD) CN against
1301 an arbitrary set of patterns rather than the hostname, with
1302 A new 'TLS Allowed CN' set of directives which are implemented
1303 in the Client resource. Then pattern matching is used in place
1304 of hostname matching against the Certificate's CN. As an example, we
1305 have certificates which (a) use a local CA, and (b) have a CN of the
1307 kes Add new/changed entry points to Win32 build
1308 kes Create unaccepted-projects for projects that are not accepted.
1309 kes Simplify locking in the reservations system.
1310 kes Add more debug code in reservations.
1311 kes Make sure error condition on reserving a volume is handled correctly.
1312 kes Correct handling of volume_in_use.
1313 kes Correct handling of initializing a device.
1314 kes Move handling of broadcasting releasing a device into release_device().
1315 kes Correct attaching dcr to dev so that it is only done if device
1316 is properly initiated.
1318 kes Locking debug level tweaks in SD.
1319 kes Tweak new Volume code.
1321 kes Add exec external-command [wait-seconds] to bconsole. This
1322 executes the external-command. Note! normally external-command
1323 should be enclosed in double quotes.
1324 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1325 it should normally be off in a production system.
1327 kes Implement die command for SD so that we can force it to dump.
1328 kes Implement SD lock debug code.
1329 kes Implement new algorithm for keeping Volume list in SD. It
1330 is now owned by the device.
1332 kes Implement new code for freeing in use volumes that should
1333 resolve if not all, some of the problems of multiple drive
1334 tape conflicts described in bug 801.
1336 kes Fix gui/bacula-web/images files in svn.
1337 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1339 ebl Fix a bug in batch mode (in string escape)
1340 kes Correct migration prune SQL typo that crept in in a
1341 recent 2.1.x change.
1343 kes Move bnet_despool() into class in bsock.c
1344 kes Modify job report to include director name and Build OS.
1345 kes Move drop root privilege and check_catalog() before fork.
1346 kes Add update database scripts (version 9 to 10) to updatedb directory.
1348 ebl Check size and age of each file after its backup to see if
1349 it has changed during backup, if 'checkfilechanges' is set.
1350 The FD will do an extra check (stat(2)) after
1351 each file backup. mtime, ctime and size are compared with
1352 'before backup' information. If time or size mismatch, an
1353 error message will be generated. You must upgrade FD to use it.
1355 kes Make database name and user configurable
1356 --with-db-name=xxx --with-db-user=xxx
1357 kes Add back database type to message.c for debugging.
1359 kes Implement dir_sql() which issues an SQL query.
1360 kes Modify bat medialist to use dir_sql() and do some minor C++
1361 formatting as well as eliminating a number of pointers, simplifing
1364 kes Fix some of the mtx-changer grep commands for tape label readers.
1365 kes Convert a number of bsendmsg into the appropriate send/warning/error
1366 message class calls.
1367 kes Suppress the using database message in the .sql command.
1368 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1370 kes Add context menu for floating a window.
1371 kes Some minor cleanup and name changes in qt-console
1372 kes Add doing mt setblk 0 in Win32 mtx-changer.
1373 kes Apply Martin's bug fix to move definition of ENODATA for
1375 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1376 sqlite2 and sqlite3.
1378 kes More pruning cleanup.
1379 kes Turn on wait_for_drive by default in mtx-changer.
1380 kes Turn on Batch insert code by default as it now passes regression.
1381 kes Add ./configure --enable-bat to enable building of Bat.
1382 No install yet though.
1384 kes Implement a new .sql command for bat.
1385 kes Implement code to turn off pruning in obtaining the next volume.
1386 Pruning is turned off for the status dir command, but turned on
1387 for SD requests and for the list nextvolume command.
1389 kes Correct Qmsg() that was not updated correctly when committing a
1390 previous change (probably the recent TLS patch).
1392 kes Write new subroutine is_volume_purged() that explicitly checks
1393 if the Volume is purged, and if so marks it as such. This should
1394 resolve problems reported about needing to mount twice to recycle
1396 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1397 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1398 amount of duplicated code.
1399 kes Do volume pruning only for the Media Type desired (reduces pruning time
1400 if multiple Media Types are in the same pool).
1401 kes Implement more detailed info in the Job report for the Bacula version
1403 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1405 ebl Add bbatch tool to bench database and insert mode.
1406 Fix sql quote stuff in batch mode
1407 Fix sql stuff for mysql
1409 kes Correct problems with am/pm scheduling. Fixes bug #808.
1410 kes Implement new prunning code that prunes up to 1000 jobs at
1411 the same time. The same technique can be applied to a number
1412 of other prune/purge subroutines.
1413 kes Add an insanity check when starting a new tape job to ensure
1414 that the tape position has not been changed. If so fail the
1416 kes Fix Win32 build for dlls to add the folllowing:
1417 src/lib/bsock.c -- new file with new entry points
1418 src/lib/dlist.c -- new entry points
1419 src/cats/sql_create.c -- new entry point
1420 src/cats/sql_cmds.c -- new DATA item exported
1422 ebl batch mode cleanup bscan-test is ok now.
1423 kes Implement SD code to check length of disk volume before appending.
1425 kes Correct return status on db_batch... routines.
1426 kes Add call to db_write_batch_file_records() to migration code.
1427 ebl Fix AfterJob timing
1428 kes Move the checking of the database in initializion of the Director
1429 to after we drop privileges. This avoids the need for both root
1430 and bacula access to the DB.
1431 kes Correct a misplaced variable definition in src/filed/backup.c
1432 kes Correct how the new batch insert db_create_attributes_record()
1433 uses the arguments. Caused a seg fault in bscan.
1434 kes Implement lock() and unlock() methods in DEVICE class.
1435 Implement block() and set_block(xx) methods in DEVICE class.
1436 kes Modify bnet_connect() so that it uses time() to check for the
1437 wait time expiring (on some OSes, some system calls may not
1438 return immediately).
1439 kes Modify Verify to obtain the previous JobId when it is actually
1440 running rather than at schedule time (as it was in 1.38.x).
1441 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1443 kes When checking pid in pid file, continue running if the pid is
1444 the same as ours. This occurs on IRIX after a system crash.
1447 kes Extend new GUI API.
1448 kes Make the ua structure a class, and implement send_msg(),
1449 error_msg(), warning_msg(), and info_msg().
1451 kes Apply fix from for building wx-console on the Mac from
1453 kes Implement new select mechanism for GUI programs.
1454 kes Reorganize initialization of stackedWidgets in bat.
1456 kes Add updated nagios plugin supplied by Christian Masopust.
1458 kes More bat implementation.
1459 kes File migrate bug with Pool Occupancy using mediaid instead
1460 of jobids. Fixes bug #795.
1461 kes Fix orphaned buffers in filed backup and verify due to
1462 crypto buffers not freed during errors. Fixes bug #789.
1463 kes Extend new GUI api code to tree commands.
1464 kes Ensure that tree and dot commands check console ACLs.
1465 kes Permit marking directory with trailing slash.
1466 kes Allow 20 console connections (instead of only 10).
1468 kes Add smartctl call to bacula-sd.conf as an example of getting
1471 kes Modify jobq.c to let simultaneous restore jobs run. This may
1472 cause them to fail if they cannot get a drive.
1473 kes Add Client Connect Wait to Storage daemon to permit users to
1474 modify the time the SD waits for a FD connection.
1476 kes Correct virtual changer check which was backwards. This caused
1477 volumes to be unloaded into slots already occupied.
1479 kes Apply Command ACL filter to JobId list in restore command.
1480 kes Correct typeo in var.c patch.
1482 kes Don't let Bacula prune File or Job records for the current Job.
1483 kes Fix variable substitution pad + inc bug reported (with patch)
1486 kes Correct SQLite log table index as reported by Luca Berra.
1488 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1490 kes Begin implementing new comm signals for API.
1491 kes Fix a few places in lib/message.c where the open fd may
1493 kes Continue implementing lib/bsock.c (real class). Make jcr,
1494 who, host, and port private. There are new methods to access
1495 them for non-class use. This required touching a number of files.
1497 kes Add LANG=C to autoconf/randpass so it works with languages other
1498 than English. Fixes bug #788.
1500 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1502 You will not be able to generate Include/Exclude list any more.
1503 It will be fixed soon.
1504 If you want to use this, you can apply
1505 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1507 kes Restore of sockets created false error messages because Bacula
1508 no longer restores sockets, but the code was still trying to
1509 set the attributes on a non-existent file. Reported by a user.
1510 ebl finish RecyclePool feature
1511 Media will takes Pool.RecyclePool
1512 when moving from Scratch to a Pool or when user will do
1513 update volume=xxx frompool
1514 To use it, add RecyclePool = aPool to your Pool resource
1517 RecyclePool = Scratch
1521 kes Expand new BSOCK class adding signal() and new BNET signals.
1522 kes Begin enhancing the dot commands adding a new API function
1523 that returns more information and will make it easier
1524 to interface to the Director from a program.
1526 kes Make DEVICE fd private. Its new name is m_fd, and can be
1527 obtained with dev->fd() outside the class. This is the
1528 first of many DEVICE members to be made private.
1529 kes Implement Michael Renner's idea on having a virtual disk
1530 changer. I made some minor modifications (e.g. I did not
1531 implement the Virtual Changer directive, but simply set
1532 the Changer Command to an empty string.
1534 kes Implement a BSOCK send() method that writes the whole record
1535 in a single write() request rather than in two.
1536 ebl add update volume=xxx recyclepool=yyyy
1537 volume takes recyclepool from pool when using update volume=xxx from pool
1539 kes Fix encryption deblocking bug, which caused some restored files
1540 to be truncated. This fixes bug #763.
1541 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1542 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1544 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1545 ebl Use btime_t instead of uint64_t in media patch.
1547 kes Optimize the use of the database a bit in the Status dir command.
1548 Only open it when needed, ensure that if any previous database
1549 was opened, it is closed.
1551 kes Correct VolCatBytes bug from media patch.
1552 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1553 in the case of orphaned records.
1554 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1555 and File records in 300K chunks to be more efficient. This
1556 idea came from Juan Luis Frances (if I remember right).
1557 kes Apply Eric's scratch patch that moves a purged Volume to
1558 the RecyclePool. Question: how is RecyclePool set? what
1559 happens to the ScratchPool?
1560 kes Apply Eric's media patch that collects read/write media
1561 times as well as byte counts. This patch requires a
1562 simultaneous upgrade of the DIR and SD. Note, there
1563 should be some way to turn off timing. I'm not sure
1564 times are in Bacula units.
1565 kes Apply Eric's batch-insert patch.
1567 kes Update projects list.
1569 kes Implement Include/Exclude file lists in FD as dlists using
1570 the new dlistString class. This permits efficiently having
1571 large include/exclude lists and completes project Item 25.
1572 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1573 console is authorized to cancel the job. This fixes bug
1575 kes Modify SD so that the VolCatJobs medium record is updated
1576 at the beginning of a Job rather than the end. This
1577 fixes bug #775 where exceeding MaxVolJobs caused jobs
1579 kes Added a mutex around getting and setting Volume information
1580 so that multiple simultaneous jobs will single thread.
1582 Switch to using Subversion
1583 kes Remove src/pygtk-console/ from configure
1585 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1586 plus the entrypoints.
1587 kes Apply patch supplied that corrects debug print
1588 in canceling jobs for max run time. Supplied as
1589 part of bug #621, which was previously fixed.
1591 kes Test on job_canceled() and sd_msg_thread_done inside
1592 loop starting the message thread to avoid a race condition.
1594 kes Remove rl_catch_signal from console.c as it conflicted
1595 with the header definition. Fixes bug #765.
1596 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1598 kes Clarify some stored/acquire messages to indicate if the
1599 problem is with read or append.
1601 kes Fix memory leak with storage ids in cats/sql_get.c
1602 kes Terminate watchdog earlier to avoid reference to released
1603 memory -- reported by Jason Austin.
1604 kes Move closing the database from jobq.c to the director daemon
1605 termination routine. This fixes memory leaks for shadow jobs
1606 (i.e. migration jobs).
1607 kes Free up the unique jobid chain items in migrate.c. This fixes
1608 a memory leak problem.
1609 kes Convert some ugly looking for statements to use foreach_alist
1610 in findlib/find.c. This will facilitate converting the structures
1611 to use dlist (for large include/exclude lists).
1612 kes Fix a bug in the btree.c and btree.h routines, then rename them
1613 rblist and add them to be built in src/lib. Include some new
1614 methods written by Rudolf Cejka that make the code more readable
1615 (hides some of the ugly casting).
1616 kes Add set_next() and set_prev() methods which make the code much more
1617 readable. Also add a new dlistString class that facilitates storing
1618 strings in dlists. To be used in the large include/exclude lists.
1619 kes Make some trivial modifications to lib/tree.h that use rblist
1620 rather than dlist for storing the tree links. This was suggested
1621 by Rudolf Cejka. The result of this is that the restore tree now
1622 uses red-black binary trees rather than simple linked lists. This
1623 should give rather dramatic speed improvements for directories
1624 contining large numbers of directories/files (more than 10000).
1626 kes Fix maxruntime bug #621.
1628 ebl Implement the include JobID in spool file name project.
1629 kes Reorder projects file in order determined by Jan 2007 vote.
1630 kes Implement item #12 on project list -- quick release of FD by
1632 kes Fix open of SQLite3 db where user does not have write permission
1633 so that DIR does not crash. Fixes bug #761.
1635 kes Add back missing @ in Win32 Makefile.
1636 kes Change 'Device not configured to autolabel' from INFO
1638 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1639 which should restart an indefinite # of times.
1640 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1641 other DIR specifications.
1643 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1644 Fix path quoting in SQLite scripts.
1645 Fix problems with SHGetFolderPath.
1647 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1649 kes Fix Job restart on error bug that promotes an Inc to a Full
1650 backup. This should fix bug #755.
1651 kes Add qt-console and first cut of code.
1655 kes Fix Bacula->Documentation link on Win32 to point to index.html
1656 instead of bacula.html. Fixed bug #750.
1657 kes Return JobId in db_get_job_record() when JobId==0. This should
1659 kes Do not release source pointers when restarting a failed job.
1661 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1662 This *should* fix bug #747.
1663 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1666 kes Modify USTORE constructor to set an empty store_source string,
1667 and don't copy the store_source string in a cancel. Hopefully
1668 this will fix Arno's seg fault, bug #744.
1669 kes Add back code to disable conio in configure. Fixes bug #743.
1670 kes Correct the Options scanner in the FD to correctly handle
1671 SHA1 option, which was eating the next option. Reported by
1673 kes Add code to indicate when the SD is spooling, spool wait, and
1674 despooling as requested by Alan Brown.
1676 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob