1 Technical notes on version 2.5
5 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
6 examples/database/dbcheck.sql
7 enhancement to wait command: wait mount ...
9 filepattern (restore with regex in bsr)
14 ebl Add new ScratchPool directive to Pool. Thanks to Graham
15 ebl Turn on db_get_file_list() single SQL because the failure
16 was due to a full FS. And the accurate test fails with the
19 ebl Fix a bug that doesn't update RecyclePool all the time
20 during the first startup.
22 kes Turn off db_get_file_list() giant SQL because if fails on
23 my production machine.
24 kes Fix bat.pro.in so that bat is properly installed rather
27 kes Modify search for .conf file so that if one is given on
28 the command line, it will be used, otherwise it will use
29 the SYSCONF directory. It will no longer look in the current
30 directory unless explicitly requested on the command line.
32 kes Fail a job that references a plugin if no Plugin Directory is
35 kes Fix bug #1211 crash during reload with bad dird.conf file.
37 ebl Add detection of intptr_t and uintptr_t to configure process
39 ebl Change some cast to use intptr_t instead of long
41 kes Apply acl_solaris_update.patch submitted by Marco (thanks).
42 kes Remove configure check for resolv.h -- it is apparently not needed
43 and causes build warnings on FreeBSD.
44 kes Ensure that the installer and newinstaller Makefiles are called
47 kes Apply Eric's fix for suppressing extended attributes error messages
48 when dealing with deleted files.
50 kes Add src/win32/newinstaller -- single file installer
51 kes Attempt to explicitly call gmake when needed, or if not found
52 skip the calls. This should fix the FreeBSD regression/build.
54 kes Fix bat.pro.in so that bat will install.
56 kes Add more debug output to VSS init.
57 kes Attempt to correct win32 debug in berrno.
59 kes Fix bug reported by Dan where make fails in clean of src/win32.
61 kes Fix bug #1212, SD is unable to recycle purged volumes. fstat()
64 ebl Despool attributes directly from the director if attribute
66 Beta Release 2.5.28-b1
68 kes Fix bat install broken by $DESTDIR change.
70 kes Fix annoying compiler warnings in console/conio.c
71 kes Fix win32 build (depended whether or not ./configure was run).
73 kes Apply fix suggested by Bruno Friedmann to configure.in to
76 kes Turn on Eric's match_bsr tape block checking code.
77 kes Correct values used for tape block numbers in record.c.
79 ebl Fix a problem with PoolUncopiedJobs option which was broken
80 by the new JT_JOB_COPY type.
81 kes Fix bug #1206 -- Error: sql_update.c:194, which was probably
82 caused by the user modifying the Bacula DB schema.
83 kes Remove rogue line of C code.
86 Beta Release 2.5.16-b1
89 - Add "list copies" command
90 - Add JT_JOB_COPY type for job copies
91 - Don't allow copy jobs in automatic restore
92 - Promote next copy job as backup when original job is deleted
93 kes Closed bug #1207 -- 2.4.4-b1 strange volume/device handling
94 kes Closed bug #1204 -- Undescriptive help options
95 kes Closed bug #1202 -- Revise documentation
96 kes Closed bug #1178 -- Bat 2.4.3 tries to double-purge volumes
98 kes Closed bug #1166. Fixed by Eric -- Problem canceling job if
99 client looses connection while being backed up.
100 kes Fixed bug #1200 -- inconsistent auto purge documention
101 kes Fix documentation for Recyling ambiguity. Fixes bug #1200.
102 kes Remove old mmap code from compat.h/cpp
104 kes Correct typo in Win32 Makefile editing
105 kes Correct typos in debug output.
106 kes Improved error detection in creating bsrs.
107 kes Add debug code to Win32 restore
110 ebl Cleanup director VolParam struct
112 ebl Replace File:Block in BSR by Address to fix #1190
114 kes Correct missing return in Darwin code.
116 ebl Copy joblog after a Copy job
118 kes Tweak block.c read to more closely simulate write for computing
119 block addresses and turn on disk block testing.
120 kes Implement a crude 'list joblog' mostly for debugging.
122 kes Fix Migration bug #1206 sql error with NULL FileSetId when no jobs
124 kes Fix Migration JobLog bug #1171. Get the JobIds correct.
126 ebl Fix segfault in bscan when using debug mode
128 kes Fix configure to do minimum Win32 configure so that make clean
130 kes Tweak modify FD header to use %ld instead of %d.
131 kes Remove hand scanning of FD header in SD and use Bacula's
132 sscanf, which is now OS independent.
133 kes Define new object (file/dir) begin and end Volume label records
135 kes Use new method of defining XATTR #defines to avoid need for having
138 ebl Rename all STREAM_ACL_..._T into STREAM_ACL_..
140 ebl Add a new lock manager that can detect deadlock situation
141 This new option is activated with a --enable-lockmgr configure
143 ebl Add new Director->MaxConsoleConnections directive
145 ebl Fix bacula-sd hanging after tape gets full + unload
147 ebl Remove extra db_lock() in get_prune_list_for_volume()
148 ebl Apply 2.4.3-prune-deadlock.patch that fixes a problem when
149 using Catalog as message backend.
151 kes Apply Marco's Darwin xattr patches.
155 kes Apply Marco's Extended attribute support patch.
156 kes Update projects file
158 kes More changes to ensure that during thread switches the jcr
159 is removed from the TSD.
160 kes Ensure that consoles attach jcr to thread, and that only the
161 thread attached is removed from the TSD.
163 kes Move definition of FileId_t to bc_types and define it once in the jcr.
165 kes Remove all time_t from arguments in favor of utime_t, which is
167 kes Add more debug to match_bsr.c and use %u for unsigned debug editing.
169 ebl Apply patch for bug #1182 about Recycle flag
170 that is not updated after a pool change.
171 kes Since the user has been warned, allow console purge command
172 to purge volumes that are in use. This is a fix for bug
173 #1191 before it was submitted.
174 kes Fix Win32 build to add new sd_plugins.c
175 ebl Apply patch from bug #1175 that reset the Slot and the Inchanger
176 flag in db_make_inchanger_unique().
177 ebl Remove a Emsg() after recieving a Fatal signal that can lock
180 kes Apply patch from bug #1187. It prints an error message if the
181 Maximum Block Size in the SD is too big.
182 kes Increase Maximum Block Size to 2,000,000 bytes.
183 kes Use doubly linked bsr list so that consumed bsrs may be
184 removed. Removing not yet implemented.
186 kes Implement a fix that very likely fixes the undesired volume
187 purge reported by Graham Keeling.
188 kes Implement bsr block level checking for disk files. However,
189 it does not work correctly in accurate tests, and all the
190 migration and copy tests, so it is turned off.
191 ebl Make SD plugins work.
193 ebl Apply Riccardo's patch to compile bacula+mysql on mandriva
195 ebl Add more variables accessible through the director plugin
198 ebl Do work on plugins
199 - fix compilation of the director plugins
200 - add plugin list to status dir output
201 - add director plugin dump after a fatal signal
202 ebl Apply Riccardo's patch that fix some win32 compilation errors
203 and a bug with bat version browser.
205 ebl Add Plugin debug after a fatal signal.
206 ebl Add db and rwlock debug after a fatal signal.
208 ebl Fix maxwaittime to fit documentation, this time is now counted
209 from the job start and group all wait periods.
210 ebl Add tips for postgresql to improve performance when having
211 multiple batch insert at the same time.
213 ebl Remove extra debug for db lock.
215 kes Apply Riccardo's second patch that cleans up the #include
216 file order + a few Win32 particularities to make bat work
218 ebl Add allow_transactions flag to mysql db backend.
219 kes Apply win32-fixes patch from Riccardo that makes the Win32
220 bat more stable and faster (but still slow).
222 kes Fix bug with job name duplication if more than 60 jobs created
224 kes Correct some bugs of cleanup in SD if the FD connection fails.
225 ebl Add code to get more information after a fatal signal.
227 ebl Apply Bastian's patch that add spooldata=yes|no option
230 ebl Fix bash shell to sh shell in database creation script
232 kes Fix orphaned jobs (possible deadlock) while pruning.
233 kes Use jcr stored in bsock rather than searching in getmsg.c.
234 This results in about a 5% speed improvement with four
236 kes Implement win32_chmod that uses wide characters, if possible,
237 to get and set the file attributes.
239 kes Apply pane freezing during updates patch from Riccardo Ghetta.
240 kes Rework next_vol and autoprune a bit due to failure in
241 recycle-test. prune_volumes() now returns no status,
242 but should prune at least one Volume, if possible.
243 kes Modify check_if_volume_valid_or_recyclable to reject a
244 volume with Recycle set off.
245 kes Modify prune_volumes() to continue if volume Recycle is off
246 or if the volume has expired. Add more debug.
248 kes Fix bug #1046 VolumeToCatalog incorrectly reports mounted
249 filesystems as missing on the Volume.
250 kes Rewrite the set_jcr_job_status() code to include job status
251 priorities so that more important status changes occur but
252 lower priority status changes will not overwrite something
253 more serious. This could possibly cause reporting incorrect status
254 reporting in some cases. More testing is needed to ensure
255 I have the right priorities. This vastly simplifies the previous
257 Verify Diff status should now be correctly reported, whereas it
259 kes Reduce some debug output.
260 kes Apply Joao's patch to SQLite tables to make chars work.
262 ebl Fix #1175 About update slots that don't reset InChanger flag when
264 ebl Fix #1173 where prune_volume() returns a volume from the scratch.
266 kes Remove jobq.c constraint that read and write SD must be
267 different. This may lead to more deadlocks in the SD,
268 but they should be resolved there.
269 kes Ensure that job report is always printed even if job is failed
271 kes Don't print job report twice for failed VBackup jobs.
273 kes Fix editing of retention time difference to use 64 bit
274 int instead of 64 bit unsigned. This should permit very
275 long retention periods.
276 kes Implement code to prohibit a write job from appending to a
277 Volume that will be used for a read operation. This is
278 new code and could possibly cause some conflicts.
280 kes Integrate James Harper's Exchange Win32 plugin patch.
281 kes Apply patch from Marco van Wieringen that implements the new
282 Solaris libsec interface for ACLs so that Bacula can save and
283 restore both the new ACLs and old ACLs.
284 kes Marco's patch also corrects the file dependency generation code
285 so that it works properly both with shared libraries and static
287 kes Marco's patch also includes a small cleanup of the cats Makefile
288 to remove some references to non-existent files.
290 kes Modify win32 Makefiles to use full paths in most cases.
291 In particular add MAINDIR environment variable that points
292 to the main Bacula source directory.
294 kes Add read volume list code to SD -- not yet used.
295 kes Add James' binutils patch
296 kes Split volume management code out of src/stored/reserve.c into
298 kes Modify configure to do an automatic make clean. This ensures
299 that any changes to ./configure options are handled correctly.
301 Beta version 2.5.16 release:
303 ebl Rename JobStat table to JobHistory
304 kes Ensure that only normally terminated jobs are migrated.
306 kes Add Makefile dependency when using LIBTOOL_LINK so that any
307 change in ./configure options will be accounted for.
309 kes Fix typo in the ACL patch that I overlooked.
310 kes Apply Marco's libtool include patch.
312 kes Apply Bastian Friedrich's ACL patch to eliminate ACL
313 errors during restore.
314 kes Minor cleanup of create_restore_volume_list() code.
315 kes Fix typo in console Makefile.in
317 ebl Fix #1110 about RunScript that can't execute a script with
318 Unicode characters in the path.
320 kes Apply tray-monitor patch from Bastian Friedrich to make it
321 work with the new FD.
323 kes Apply cleanup patch from Marco
324 kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
325 that implements libtool to create shared objects out of
326 the Bacula libraries.
327 kes Fix tray-monitor so it will speak to new FD.
328 ebl Fix bug with ANSI label when volume name length < 6
329 ebl Fix segfault in debug level > 50 with btape.
330 ebl Remove warning message in btape when command is empty.
331 kes Fix Win32 build to pull in new BACULA define.
333 kes Change IncludeDir to Exclude Dir Containing.
334 kes Implement code to prohibit ExcludeDirContaining in an
335 Exclude section (same for Plugin and Options). A bit
336 of a kludge with RES_ITEM2 ...
337 ebl Add field to command list to restrict Runscript console
339 ebl Use a separate JCR when running Console command with Runscript.
340 ebl Permit to mark version as Beta in some outputs
342 kes Add plugin types in jcr.h to reduce need to cast.
343 kes Do better checking of plugin return values.
344 kes Free plugin context after calling pluginFree() as
346 kes Allow plugin to call JobMessage with NULL context.
347 kes Do not add plugin to global list if loadPlugin returns error.
348 kes Rework plugin.h a bit to reduce dependence on Bacula.
350 kes Move generation of bsr file for Virtual Backup to run section
351 so that it is generated just before actually running.
352 Suggested by Graham Keeling.
354 kes Add malloc and free Bacula entry points for plugins. Increment
355 FD plugin interface version. Create a Bacula plugin context
356 structure to keep track of whether or not the plugin is disabled.
357 kes Apply FileIndex fix for plugin name stream suggested by James.
358 kes List plugins in FD status report when debug > 0.
360 ebl Add a new VerId variable that is printed in version command.
361 kes Fix migration SQL not to migrate a job that has not terminated.
362 This is a partial fix to bug #1164.
363 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
364 backup start time bug reported by Graham Keeling.
366 ebl Fix possible bug in cancel_job() with job that are not
369 kes Fix bat build for Win32.
371 kes Copy plugin link field into ffpkt.
373 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
374 It provides FileRegex in bsr files and code to collect regex
375 from the user during restore, an Allow Mixed Priorities feature,
376 and documentation for the above.
377 ebl Remove db Berkeley from configure process
378 kes Do dirty check on hostname (Linux only) and if not resolvable
379 use localhost as default.
380 kes Increase vtape max block to 20GB.
382 kes Refactor restore code to create a close_previous_stream(). This
383 This may destabilize the source.
384 kes Implement planned startRestoreFile() plugin call.
385 ebl Remove missing Loaded information from status slots storage command.
386 ebl Fix Console command problem that cancels the job
387 kes Add more plugin restore debug code.
389 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
390 kes Rewrite plugin restore interface a bit to correspond to how Bacula
391 creates and writes to the restored file.
392 kes Add some DebugMessage() calls to the bpipe-fd.c program.
394 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
395 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
396 Bat; allow add and delete in place of mark and unmark.
397 kes Another attempt to fix the endRestoreFile plugin bug noted below.
399 kes Apply dbi driver patch from Joao.
400 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
401 Bastien Friedrich reported the bug.
402 kes Create plugin instance only when FD job starts.
403 kes Add new FD plugin event: bEventCancelCommand when
404 a cancel command is issued to the FD.
406 kes Add cmd_plugin flag to jcr so we can globally know if a
407 command plugin is running.
408 kes If command plugin running, do not attempt (for the moment)
409 to get Win32 extended attributes.
410 kes Ensure that proper Win32 flags are set in bfile packet
411 if plugin_bopen() works on Win32.
412 kes Remove generated src/plugins/fd/Makefile
414 kes Implement build and install of bpipe-fd.so plugin.
415 kes Rework the interface that passes packets to the plugin
416 so that the packet is started and ended by the packet size.
417 This allows the driver to do a sanity check.
419 kes Rework the pluginIO Bacula internal code to enable
420 proper handling of Win32 error codes from GetLastError.
421 kes Apply Joao's patch to regress startover_libdbi.
423 ebl Add -B option to dbcheck to get catalog information
424 kes Fix Win32 build to include new library function.
425 kes Remove some old reader/writer code.
426 kes Implement ./configure --with-plugindir=xxx
427 ebl Fix the mysql bug in the new accurate code
428 kes Improve plugin debug. Create plugin test.
429 kes Set main thread specific data to INVALID because it
430 has no jcr. This allows debug output to work correctly.
431 kes Add src/plugins/fd/Makefile to ./configure process.
432 kes Make first cut attempt to correct SQL that computes the current
433 Pool usage. This is to fix bug #1159.
434 kes Do a bunch of plugin cleanups for Win32 and more careful checking
435 of PluginDirectory and whether or not a plugin was found.
437 kes This code should fix the race condition that leads to a Director
438 crash at job end time when the job list is updated. This was reported
440 kes Add more plugin documentation and fix include of config.h for
441 Win32 build (I hope).
443 ebl Revert to htable instead of rblist
444 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
445 tree instead of htable.
446 ebl Use a dedicate DB link to compute and send the accurate list
449 kes Fix compile errors in filed/fd_plugin.c.
451 kes Remove all double quotes from SQLite creating script and
452 replace by single quotes as suggested by John Huttley.
454 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
455 It significantly improves the performance of dbcheck for
457 kes Fix bad debug code call in src/filed/accurate.c
459 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
460 output. Perhaps we really need to implement M_SAVED.
462 kes Fix bug #1156 FD crash during processing of Accurate data.
463 kes Tweaks to htable code to improved debugging and make names
464 a bit more meaningful.
466 ebl Remove time_t from update_stats()
468 kes Modify the license of the example plugin program to allow
469 it to be used by anyone for making a Bacula plugin.
470 kes Make apply_rp_codes() in bpipe-fd.c be static.
472 kes Remove Encryption and Accurate lines in vbackup output -- not used.
473 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
474 kes Add host name to items printed during dump.
475 kes Make Check File Changes default on.
477 kes Set the default FD timeout to 3 minutes (previously 30).
478 kes Apply Bastian Friedrich's weird spelling correction patch.
480 kes Always print Verify hash differences. Rename variable to make the
481 code slightly more readable.
483 kes Correct tests for MaxFullInterval as reported by
484 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
485 kes Fix MaxDiffInterval code as well.
486 kes Enable Win32 plugin load code in lib.
487 kes Make Verify code that computes disk checksums use the same
488 algorithm as backup when dealing with sparse files.
489 kes Attempt to run VSS on any systems newer than Vista -- should
490 make it work on Windows Server 2008.
491 ebl Change the new statistic implementation. Remove the UseStatistic
492 directive and add a 'update stats [days=...]' command. You can
493 now decide when copy job records from Job table to JobStat.
494 Statistics are much more accurate with this.
496 kes Fix SQL case problem that may cause the failure of DiskToCatalog
498 kes First cut adding SD plugins.
500 kes Add Slot if it is non-zero to writing bsr file after a
502 kes Change a number of bnet_fsend() into class method calls.
503 kes Begin audit of diff of 2.4 branch to trunk code.
505 ebl Fix the mysql creation script that double-created an
506 index of the same field on the Media table.
507 Add an index to on VolumeName to the Media table for mysql.
509 kes Another try at fixing Vbackup. It looks much better this time.
510 Disable file index sanity check in FD with value stored in
511 attributes record because with Vbackup the File Index gets
512 changed, but not the attributes record.
513 Enhance some debug code.
514 Fix handling of re-indexing records that are copied in Vbackup.
516 kes Made level_to_str() know about Virtual backup.
517 kes Set correct Virtual backup write pool.
518 kes Fix compile warning in new dbcheck port code.
519 kes Fix migration code broken by previous virtual backup fix.
521 kes Fix problem of Virtual backup not writing a sequential FileIndex.
522 kes Reset Virtual backup time/date to the value from the last backup.
523 kes Ensure that storage name is passed to SD on read.
524 kes Correct a problem with Level and Virtual backup, rework how
525 bsrs are printed in debug to use standard routine.
526 kes Apply patch from Chris in bug #1133 that provides alternate db port
528 ebl Remove catalog dependency from bcopy tool.
529 ebl Modify catalog scripts to have an easier packaging integration,
530 using default variables.
531 Make difference between SQLite3 and SQLite in db_get_type()
533 kes Apply most of changes in a patch from:
534 Michael Stapelberg <michael+bacula@stapelberg.de>
535 that allow the Bacula FD to compile on IRIX 6.5.
537 kes Apply patch from Bastian Friedrich that accepts a yes on a
538 delete volume command line.
539 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
540 job when reading from one autochanger and writing to another.
541 kes Minor tweaks (copyright dates convert to use method instead of bnet).
543 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
544 drives when no tape is mounted.
546 kes Add additional info to some SD messages.
547 kes Add fix supplied by Martin Simmons for turning off EOL character
548 in new console multi-command code.
550 kes Fix a Verify InitCatalog problem where in certain cases
551 a garbage filename may be entered in the verification database. This
554 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
555 sent in by Riyas Yoosuf.
557 kes Fix seg fault in Dir during estimate command with no level value
558 given. This fixes bug #1140.
560 kes Add message to migration job when the target job is already migrated.
561 This closes bug #1129.
564 kes Raise some restore debug levels.
565 kes Replace off_t by boffset_t where ever I found it.
567 kes Define a machine dependent ioctl request type for use with
570 kes When a migration job actually runs, re-check the Job record
571 and skip if the job is already migrated. This should
572 significantly reduce the problems with bug #1129.
574 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
575 turn off glibc checks that prevent getting good dumps.
576 kes Implement console 'wait mount' command. Doesn't yet work.
577 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
578 kes Break the do_swapping into do_unload, do_swapping, and
579 do_load. It is much more logical that way.
580 kes Implement a set_dcr_from_vol subroutine in acquire.c for
581 reading volumes. This allows the dcr to be refreshed after being
582 zapped when the wrong volume is mounted.
583 This should fix bug #1126 -- During multiple tape restore, bacula
584 does not ask for physical tape change, but rereads same tape
586 kes Apply patch submitted for bug #1107 with a small modification.
587 This fixes a bug where bcopy copied too many records.
588 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
589 This fixes bug #1124.
590 kes Make the default bat restore Pool be Any. This fixes bug #1118.
592 kes Remove debug statement that crashes the SD at the end of
593 a tape during restore. Fixes bug #1125.
595 kes Implement Win32 bat changes made to Branch-2.4
597 kes Tweak separator command in console to start disabled and
598 allow defining no separator character. Also make code a
599 bit more fault tolerant.
600 kes Make btraceback write the traceback to the working directory
601 before attempting to mail it.
602 kes Add a RFC to Projects.
604 kes Attempt to implement a kludge to make Qt work with bat
606 kes Setup rstorage correctly. Virtual backups are working.
608 kes Move setting JobLevel and JobType into a method, which should
609 allow completing Virtual Backups.
610 kes Fix verify jobs to work again.
612 kes Virtual Backup tweaks -- it is close to working.
614 kes Ensure that SD tried to mount a volume not in an autochanger
615 at least once before asking for operator intervention.
616 kes Make SD aware of Virtual Backup jobs.
617 kes Add VirtualFull for bat.
618 kes Changes to get read storage correct for Virtual Backup.
620 kes Remove old code from label.c
621 kes Split display_display_info() out of write_bsr_file()
622 kes do_vbackup_init() working -- i.e. bootstrap file built.
623 kes Change Bacula trademark owner from John Walker to Kern Sibbald
624 kes First non-working cut of vbackup
625 kes Correct FD heartbeat code to use volatile variable accessed by
627 kes Zero thread id with memset if on Win32 in case it is a struct.
628 kes If cannot create JobMedia record, continue to try to write eof
629 and clean up in block.c
631 kes Add code to interface OpenSSL to new Win32 pthreads code which
632 used a structure for thread_t.
634 ebl tweak bat for win32 compilation
636 ebl Remove tokyo cabinet from the source
637 ebl Update configure/autoconf to support berkeley DB
638 ebl Add a sort to db_get_file_list() to improve bsr construction time.
640 kes Add a mtx-changer.conf file that is not overwritten during
641 an upgrade. It fully configures the mtx-changer script.
642 kes Clear in-use bit on vol when unused while swapping.
644 kes Remove sleep at end of ./bacula
645 kes Clear hash packet for hardlinked files correctly. This corrects
646 a long standing bug where hardlinked files selected individually
647 would occasionally not be restored.
649 kes Apply Eric's patch to ensure that autoprune does not return
650 a Volume not in the autochanger unless requested to do so.
651 kes Correct bat restore display of multiple drives. This fixes
653 kes Do find_a_volume() each time an unload is done. This
654 fixes the failure of maxvol2-test.
656 kes Add some SD debug code.
657 kes Do find_a_volume() each time an unload is done.
658 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
659 and adds --with-db-port to ./configure.
660 kes Use Qmsg() in job.c watchdog callback.
662 kes Release main control rwlock if ABORTing.
663 kes Make watchdog connect timeout queue messages rather than sending
664 directly to avoid lock conflicts with the real thread.
665 kes Add const char in dbd.c to avoid compiler warnings.
666 kes Fix python compiler string warning. Note, IMO the GNU C++
667 compiler guys have made a *very* bad change to their compiler.
668 They now force all strings to be 'const' unless you explicitly
669 cast them, which is extremely ugly and ruins nice code as well
670 as creates a lot of useless work.
672 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
673 mt. This fixes bug #1116.
674 kes Add const in python files to reduce compiler warnings.
675 This may have to be backed out because of later compiler
677 kes Fix failure of 2drive-concurrent-test. Always read label;
678 clear_unload() only after drive is defined in acquire_for_read().
680 kes Generally clean up the manual tape loading code. The main
681 conceptual change is that when a volume is marked to be unloaded,
682 its volume name is retained, and it is only marked as unloaded
683 when either the autoloader says it is unloaded or another tape
684 is read on that drive.
686 kes Add debug code and refactor subroutine in stored/mount.c
687 kes Fix format problem in bscan output reported in bug #1105.
688 ebl Fix get_next_volume_for_append logic with autochanger
689 - use pruned volumes if found
690 - don't reset the inchanger flag after getting a recycled volume
692 Fix recycle_oldest_purged_volume to take InChanger flag in account
694 ebl Add mmap/unmmap implementation for tokyodbm under win32
696 kes Make first step toward eliminating globals from config
697 scanning. Also should be a workaround for FORTIFY_SOURCE
698 GNU C bug -- fixes bug #1042.
700 kes Apply duplicate job tests to restarted jobs.
701 kes Copy more data when restarting a job so that run
702 overrides are kept. This should fix bug #1094.
704 kes More word alignment cleanup.
705 kes Fix bug where SD did not ask operator if the device could not
706 be opened. Reported by Eric.
708 kes Add dbuser to DIR conf file (replaces user).
709 kes Add --with-db-password to ./configure
710 kes Fix regress to handle db_password.
711 ebl Add new 'status storage slots' that list autochanger
713 ebl Update vtape driver to compile only under Linux.
714 ebl Fix a bug when restoring with a wrong mediatype.
716 kes Eliminate ints from conf files and structures to avoid
717 word alignment problems
719 kes Fix bug reported by Scott Barninger where the bacula script
720 refers to scripts in the wrong directory. Needed to meet the
721 requirements of recent FHS location changes.
722 ebl Disable vtape for FreeBSD.
724 ebl Modify disk-changer to check if slot contains something before
727 ebl Fix vtape on win32 and debian.
728 ebl Fix autoselect patch (cause segfault).
730 ebl Fix autoselect option broken for a while. Fix #1089. Need some
731 work with StorageId to be able to use a particular drive in a
734 ebl Rename vtape to vtape.
735 ebl Update vtape driver.
737 ebl Modify vtape driver to avoid sparse file.
738 kes Add make clean of qt-source directory during ./configure
739 kes Store last block number written to tape in DEVICE and
740 use it for testing for correct last block on EOT.
742 Release Version 2.4.0:
746 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
747 This fixes bug #1095.
749 kes Add create_postgresql_database.sql to Win32 installer. Should
750 fix problem reported by Juilio Monteiro.
751 kes Get correct slot when auto unloading a device. This fixes bug
754 kes Fix multiple media restore.
755 kes Make DEVICE Slot private and access it via a method.
756 Allows better control over when it is set and cleared.
757 kes Fix possible seg fault if SQL error.
759 kes Add Martin's fixes to argument scanning for the estimate
760 command. This fixes bug #1093.
761 kes Add debug code to SD.
762 kes Fix renaming a Volume, which used the wrong Volume name.
764 kes If operator has rewind tape, print warning, release tape and
765 try once more. If tape is positioned somewhere, something went
766 wrong, so mark the tape in error and try once more. Previously
767 this error was fatal, now it produces an error message.
768 kes Ensure correct volume name displayed during restore
769 kes Ensure that Volume is mounted for restore.
771 kes Fix a few more Coverity reported problems.
773 kes Apply Allan Black's status dir job count patch.
774 ebl Add information about IMPORT/EXPORT slots in mtx-script.
775 kes Enhance a couple of SD debug messages.
776 kes Tweak unload flag setting and ensure it is set during swap.
778 ebl Fix #1091 about bad output in estimate command.
780 kes Modify autochanger locking to attempt to avoid race
782 kes Make sure device not busy before doing label command.
783 kes Display open() errors except when polling. Previously too
784 many were suppressed. This should fix bug #1070.
785 kes Fix Win32 reparse points. Bacula will not recurse into any
786 reparse point directory, including mount points, unless the
787 directory is explicitly mentioned at the top level (same as
788 with Unix). A file that is linked to another file will be
789 backed up -- much as Unix does for hardlinked files.
790 This fixes bug #1041.
792 kes Remove double quotes from ChangeLog and ReleaseNotes
793 kes Remove StorageId test when pruning and recycling (Eric's changes).
794 kes Remove old form of locking when getting volumes -- causes deadlock.
795 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
796 the name unique and to eliminate compile time error.
797 kes Add accurate.o to Win32 FD Makefile
799 kes Fix cats dll build on Win32 after db_update_job_end_record
800 calling sequence change.
801 ebl Switch to tokyo dbm instead of htable in accurate code
802 ebl Include tokyo dbm to bacula source tree
804 kes Fix buffer overruns detected by Coverity.
806 kes Tweak joblog display.
808 kes Implement --without-qwt
809 kes Fix layout of restore tree dialog
810 kes Add configure bat QWT libraries, so that bat can be built
811 with or without the QWT libaries.
813 ebl Add dummy tape driver for regression tests.
814 kes Make sure we unload the right slot when swapping.
816 kes Add debug times, reduce size of two-pool-changer test
818 ebl Tweak autoconf scripts for vtape
820 kes Improve SD reserve debug code.
821 kes Testing an improvement to free up volumes no longer in use.
823 kes Rework SD acquire for read to handle autochanger Volume
825 kes Implement regression that explicitly tests swapping a Volume
826 from one drive to another.
827 kes Enhance disk-changer to detect most error conditions.
828 kes Fix SD code so that it properly swaps a Volume between drives.
829 This fixes bug #1083.
831 kes Apply libdbi patch from Joao Freitas for regress and for
832 Bacula trunk. Regress now works with libdbi. Nice.
833 kes Apply .nobackup patch from bug #1077 submitted by
835 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
836 name into jobs cloned via the run directive.
838 kes Prevent a Volume that is being swapped from being freed from
839 the volume list. This will most likely fix, at least partially,
841 kes Fix strippath so that it does not get a buffer overrun and crash FD.
842 This fixes bug #1078.
843 kes Remove 50 millisec wait in SD that broke debugger.
844 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
845 that a job may run, counted from when the job was scheduled.
846 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
847 a job may block waiting for a resource, counted from when the job starts
848 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
849 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
850 that implements multiple commands per line in the console when using
851 readline. Modify the default to use a semicolon as the command separator.
853 ebl Fix SQL query in migration code.
854 ebl Make accurate mode with hash disk pass regression tests
856 ebl Implement first cut of accurate backup with hash disk.
858 kes Force unload of volume when wrong volume mounted in SD.
860 kes Fix bat seg fault at termination.
861 kes Add Bacula generated version to bat about box.
864 kes Experiment with allowing multiple read jobs.
865 kes Move final volume swapping code to DCR method and
866 call it from acquire_for_read().
867 kes When wrong volume is mounted during read, unload_autochanger.
869 kes Integrate the libdbi changes from Joao Henrique Freitas
871 kes Stop searching for Volumes in SD askdir if DIR returns the
872 same volume name twice in a row.
873 kes Close bat console windows first to eliminate error message
876 kes Tweak the swap Volume from one drive to another code so that
877 it now seems to work.
878 kes Resolve several problems with recycling that broke the new
879 code (these problems are in 2.2.9 as well).
880 kes Remove the volume lock when calling the sysop code.
881 kes Don't mark a reserved volume with no writers as unused otherwise
884 kes Rework class structures for VOLRES, DCR, and DEVICE to make
885 the method names a bit more logical, and for more logically
886 handling the responsibilities.
888 kes Remove redundant code in terminating the scheduler that just
889 causes a seg fault in many cases.
890 kes Cleanup releasing a volume and make it a DCR method.
891 kes Improve algorithm for detecting pre-reserved volume and
894 kes Tweak volume swapping code so it works.
895 kes Correct name overloading in mount.c
896 kes Replace released flag in VOLRES with reserved and add access
897 methods for the VOLRES class.
898 kes Prevent volume from being released while being swapped.
899 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
900 plugin that add %w (where) and %r (replace flag) editing to
902 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
904 kes Refactor parts of stored/mount.c
906 ebl Add sanity checks for VolWriteTime and VolReadTime
907 ebl Take care of bad clock changes while computing VolWriteTime
908 and VolReadTime. This should fix or limit #1066
909 kes Correct error string numbers in dird/catreq.c
910 kes Restructure reserving, acquiring, and mounting volumes. Calls to
911 autochanger are deferred for mount.c -- simplifes the code.
913 kes Do not prune any running job. It just fails the job.
914 kes Lock the volumes when changing dev->reserved_device and marking
915 the volume unused otherwise the device can get reserved by
916 another job before the volume is released, thus blocking it.
918 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
919 kes Fix bug #1063, reuse of freed ptr in list nextvol.
920 kes Release regex compile buffer in filed/job.c
921 kes Add proper type of const char in sql_create.c
922 kes Turn off debug in daemon termination routines
923 kes Move free_volume_list() before devices are freed in stored.c
924 kes Fix reference to uninitalized stack variables in bregex.c.
925 This should correct bug #1067.
927 kes Fix possible seg fault in SD when freeing a volume entry.
929 kes Implement unload_dev() before swap device.
930 ebl Add statistics prunning with option and menu
931 kes Separate unload_dev() from unload_other_device() in autochanger.c
933 kes Apply patch from bug #1069 that corrects spurious error messages
934 when ACLs enabled on SGI but no ACL exists.
935 ebl Fix small segfault in bacula-sd when debug level is 500
936 kes Modify run_program() and run_program_full_output() to use
937 call by reference for the results string. This corrects a long
938 standing problem where the address of the string may be changed
939 in the subroutine but not in the calling program.
941 kes Re-enable code to remember last volume mounted on a non-tape
943 kes Add patch supplied in bug #1068 that fixes a SD crash when using
944 a Virtual autochanger.
945 kes Generate correct JobMedia records during spooling/despooling when
946 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
947 <tih@hamartun.priv.no> for excellent analysis and testing.
949 kes Tweak hash algorithm for htable using Martin Simmons idea
950 for doing a circular shift.
951 kes Remember what volume is in VTLs (previously turned off for
953 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
954 pointed out some problems in creating JobMedia records during
955 spooling with concurrent jobs. Fix the problem by updating the
956 start file position before despooling and generate a jobmedia
957 record at the end of despooling.
959 kes Fix handling of JobMedia records during spooling and when a
960 Volume is changed without actually writing data to the Volume.
962 kes Rework certain SD locking based on gdb tracebacks of deadlocks
963 sent by Eric. This code now uses only the volume_lock() rather
964 than the reservations lock when at EOM and acquiring a new
966 kes Ensure only one exit point in several subroutines.
968 kes Implement bsock code to permit locking. Use the new code in Verify
969 in the FD to prevent the heartbeat thread from disrupting the Verify
970 data sent to the Dir.
971 kes Modify SD locking to eliminate locking the reservations system from
972 outside the system. Use the volume lock when getting media data
973 and reserving a new volume at end of media.
974 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
975 when SD starts are not locked into place.
977 kes Fix error compiling runscript code on 64 bit machines.
978 kes Tweak Win32 mount point code.
979 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
980 cleared giving bad file estimate).
981 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
984 kes Keep Schedule run lists in order as suggested by
987 kes Implement autostart scripts for Debian.
988 ebl Implement upgrade catalog scripts.
990 ebl Apply jobstat patch for long term statistics. Have to implement
991 purge stats command and upgrade scripts.
992 kes Fix mtx-changer.in for broken Debian mt program.
994 kes Fix large number of JobMedia records reported by Eric Bollengier.
996 kes Apply doc fix from bug #1062.
997 kes Resolve crash and improper restore wx-console Win32 restore
998 GUI. Fixes bug #1065.
999 kes Update Win32 wxWidgets to latest version.
1000 kes Attempt to do correct handling of Win32 mount points. Should
1002 kes Fix Win32 FD backup/restore memory leak due to improper termination
1003 of BackupRead/Write. This fixes bug# 1038.
1005 ebl Reduce memory usage for accurate backup, working only with ctime
1006 and mtime. (not all Lstat field)
1007 About 40MB for my Linux system (400.000 files)
1009 kes Add dcr->reserved_volume flag that allows us to release a volume
1010 even if it is not vol->released. This allows maxvol2 to work when
1011 Volumes expire and we are already writing to the device (i.e. a
1012 volume is pulled out from under us by another job terminating after
1013 we reserve the drive).
1015 ebl Permit multiple command/console per runscript definition.
1016 RunScript { command = /bin/true ; command = /bin/false ... }
1017 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
1018 (restart an application) just after the VSS snapshot on windows.
1019 kes Don't zap dcr values during release_volume() as they might
1020 have the next Volume to be mounted.
1021 kes Fix AIX prototype.
1023 kes Second cut of drive switching during backup.
1025 kes Fix Win32 build.
1026 kes Update Win32 version of wxWidgets to most recent version.
1027 kes Tweak Copy job details.
1028 kes Rework dir_find_next_appendable_volume to make a bit more effort
1029 to find a suitable volume before giving up.
1031 kes Make ask_sysop_to_create... to return if waken from wait.
1032 This helps get out of blocked conditions.
1033 kes Experimental implementation of switch_device in reservations.
1034 kes Implement FD version to allow easier protocol changes.
1035 kes Add Plugin Options string -- not yet passed to FD.
1036 kes Implement PluginOptions ACL.
1038 kes Attempt to correct problems with restores with autochangers and
1039 use counts going negative
1040 kes Rework SD status command and implement API for bat. Implements
1041 header, runing waitreservation, devices, volumes, spooling,
1042 and terminated status keywords.
1043 .status storage=xxx <keyword>
1044 kes Clarify TLS error message by adding double quotes around name.
1045 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
1046 kes Pass jcr to tls routines so debug messages can be handled better.
1047 kes Rework jobq resource allocation code, and possibly fix a bug
1048 that caused reference counts to get out of sync.
1050 kes Rename fd/dir plugin to use Bacula standard underscore.
1051 kes Plugin work -- bring dir up to fd level.
1052 kes Start implementation of VTL code
1053 kes Fix Win32 build after adding new cats subroutine.
1055 kes First cut at Duplicate Job implementation.
1057 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
1058 kes Start PluginOptions string, and refactor a bit of ua_run.c
1059 ebl Apply Allan patch that permit to reset recyclepool.
1061 kes Test patch -- possible fix or improvement for bug #1053
1062 kes Refactor FD and SD status commands to permit new API code in
1063 SD, and to fix Win32 build.
1064 kes Win32 build is now working.
1066 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
1067 some ideas in patch from Scott Bailey.
1068 kes Begin implementation of duplicate Job control.
1069 kes Fix some of Win32 build after recent additions.
1070 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
1071 which causes the FD to detect whether or not the OS has the
1072 honor no dump bit (*BSD systems), and if so, to skip backing up
1073 any file with this bit set. The feature is enabled by setting
1074 'honor no dump flag = yes' in the Options section of a FileSet.
1076 kes Correct po warning message with datarootdir
1077 kes Implement more code in dird.c to put configuration parsing in
1078 a class rather than use globals.
1079 kes Restructure SD status command for implementation of bat API
1082 kes Suppress incorrect 'Will not descend from x into y' messages.
1083 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
1084 daemon globals used by parser.
1085 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
1087 kes Fix free of plugin_list when none exists.
1089 ebl Apply accurate project patch.
1091 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
1092 on non-mempool object)
1093 kes First cut of converting FD .status to work with bat API.
1095 .status client=XXX header
1096 .status client=XXX running
1097 .status client=XXX terminated
1098 kes Implement first cut of Copy Job.
1099 kes Implement Catalog in Pool resource. It overrides catalog specified
1100 in the Client resource.
1102 kes Apply patch (with some difficulties) from Joao Henrique Freitas
1103 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
1105 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
1106 ftruncate() actually works. In the case of some (cheap) NAS devices,
1107 it does not, and so recycling NAS Volumes does not work. The code
1108 simply unlink()s the file, then recreates it. This fixes bug #1011.
1110 kes First incomplete cut of big malloc blocks for htable.
1111 kes Tweak plugin code.
1113 kes Plugin debug code + tweak a couple bat dialog layouts
1115 kes Fix creating first JobMedia record during Migration to include
1116 proper index. This caused slow restores of migrated jobs.
1117 kes Temp fix to plugin name file_index.
1118 kes Bacula backed up and restored a MySQL database.
1120 kes Implement plugin restore.
1121 kes Implement parsing of db_driver to give db_type index.
1123 kes First cut of plugin restore code.
1124 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
1125 and do not strip paths on symbolic links.
1126 kes Set catalog backup database and user name from values specified on
1127 the ./configure line.
1128 ebl Fix #1031 about wrong pool source information in job report.
1130 kes Fix Win32 build.
1131 kes Remove a redundant jcr argument to find_files, match_files, and
1133 kes Implement '.status dir header|scheduled|running|terminated' that
1134 prints the requested status section. With the exception of the
1135 header, the other reports have fields separated by tabs (\t).
1137 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
1138 a resource embedded run command to find a since time if no explicit
1139 since time was supplied on the command line.
1140 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
1141 that updates the state file at job termination time in addition to
1142 when the daemon terminates.
1144 kes First version where a plugin did a backup.
1145 bpipe-fd.so created a backup file, wrote a test
1146 string to it, and Bacua could restore this fabricated file.
1148 kes Implement DB Driver = string for the DBI driver.
1149 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
1150 kes First cut of code for loading Win32 plugin dlls. Implement
1151 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
1152 and implement a dlfcn.h file based on opengroup's definitions of
1155 kes First cut plugin directives.
1157 kes Apply patch from bug #1049 to prevent stripping the path on a
1159 kes Attempt to fix bug #1047 where stripping a path corrupts the
1160 heap. Waiting for feedback.
1161 kes Correct the Mount message not to suggest labeling a new tape
1162 when doing a restore. Submitted by email by John Stoffel.
1163 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
1164 FD by using casting. Reported in bug #1042.
1166 kes A bit of crypto cleanup. More later.
1168 Release Version 2.2.8
1170 kes Apply patch from Martin to correct bug #1040, bscan sets existing
1172 kes Fixed important spelling error in doc -- bug #1045.
1174 ebl Fix bextract to be able to extract non-portable Win32 data to
1176 kes Move initialization of read/write res lock earlier in the code.
1177 This fixes the crash with a null conf file. This fixes bug
1179 kes Redefine CURES in lib/parse_conf to be URES and move it all
1180 into lib/parse_conf.c -- this responds to bug #1042, but does
1181 not fix it. The fix is not to compile with FORTIFY_SOURCE.
1182 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
1183 the trunk SVN. I don't think this was reported as a bug.
1185 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
1187 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
1189 kes Add DataDespooling and DataCommitting status (committing is
1190 the last despooling).
1191 kes Finish implementation of new reservations code noted below.
1193 kes Fix bsnprintf for float point numbers. I broke recently when
1194 parameterizing some variables. This fixes bug #1036.
1195 kes Undo recent reservations changes ... will apply them later
1196 when they work better.
1198 ebl Fixes #1034 which cause mysql to hang the connection after 8h
1199 ebl Change default statistics target of filename.name and path.path
1200 fields for PostgreSQL. This speeds lookup by indexes. Thanks
1202 kes A few more tweaks to new reservation code. Make sure to clear
1203 vol released flag when retaking volume. When reading label and
1204 label is bad mark volume unused. When recycling, mark volume
1205 unused so it can be renamed.
1207 kes Fix reserve_volume() so it doesn't release a volume in use
1208 (i.e. a volume entry not marked released). This should be
1209 the last part needed to fix bug #1018.
1211 kes Move Heartbeat documentation from Job to Director resource.
1212 This fixes bug #1033.
1214 kes Fix existing switch drive SD code to call autochanger to release
1215 any old volume. This must be done to keep the autochanger from
1216 releasing subsequently newly reserved volumes in doing a close().
1217 This should fix bug #1018.
1218 kes Fail if attempting to get console input in batch mode. This
1219 should help fail RunScript console commands that are incomplete.
1220 kes First cut implementing switch_drive() in SD (not actually called).
1222 kes Implement first cut running console commands in a RunScript.
1224 ebl Fixes bug #1028 where 'Selection Type' option was not usable
1226 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
1229 Release Version 2.2.7
1231 kes Add new free_tls() entry point so that Win32 builds.
1232 kes Fix compile warning in src/lib/util.c
1233 kes Fix entry point for edit_job_codes() so that Win32 builds.
1234 kes Fix seg fault Frank Sweetser reports in regression testing
1235 on his systems. The problem was that the original author of
1236 bsnprintf.c did not take into account the side effects of
1237 using ++x in the argument to a #define.
1238 kes Make SD protocol backward compatible with version 2.2.x.
1240 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
1241 because Bacula no longer restores sockets.
1242 ebl Always use ignorecase fileset option on win32 FD.
1244 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
1245 that implements double quoting include names in conf files,
1246 and also allows piping input by having the first character
1247 be a vertical bar (|).
1248 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
1249 that implement %f in RunScripts to pass the FileSet name.
1250 kes Skip leading | when lex input comes from a pipe as suggested
1251 by Michael Stapelberg <michael@stapelberg.de>.
1253 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
1254 Nerijus Baliunas <nerijus@users.sourceforge.net>
1256 kes Implement Plugin Directory and plugin events.
1258 kes Implement a security enhancement: TLS authentication but no
1259 encryption. Enabled by setting 'TLS Authentication = yes'.
1260 Note when this is on, TLS encryption is turned OFF!
1262 kes This patch corrects a problem where the maximum concurrent storage
1263 jobs counter gets out of sync during restore jobs causing jobs to
1264 'wait on max Storage jobs'. This patch fixes bug #1009.
1266 kes This patch fixes bcopy so that it produces correct Volumes.
1268 kes This patch eliminates spurious output to the console during a VerifyVolume
1269 job that contains encrypted data. It fixes bug #1024.
1271 kes This patch prevents the 'status dir' command from trying to use a scratch
1272 volume and possibly moving it from one pool to another. This patch fixes
1275 kes Add new include to postgresql.c suggested by Marc Cousins so
1276 that it compiles correctly with pgre version 8.3.
1278 kes Fix --archivedir addition to configure. Replace it with
1279 --with-archivedir in configure.in This fixes the regression
1281 kes This patch fixes bug #1012 where the job is canceled because
1282 of Max Run Time exceeded when the job has not yet started.
1284 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
1285 one 'part' to write. Instead of each part being stored on disk,
1286 written to DVD, then deleted from disk, all parts are written to disk,
1287 and only the last is written and deleted from disk.
1288 kes This patch fixes the status command to include the formating string for
1289 JS_AttrInsterting. It fixes bug #1021.
1290 kes This patch should fix the Mac OS X build problem on the latest
1291 Darwin, where sys/types.h was not included correctly (apparently
1292 due to a change in the Mac headers). The solution was to explicitly
1293 ensure that it is defined for the ./configure.
1294 This patch also has a rebuild of configure that includes the Debian
1295 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
1296 kes This patch should ensure that queued messages to the console are
1297 displayed as soon as possible. It should fix bug 1007, but has been
1298 reported not to work.
1300 kes This patch fixes the infinite loop when trying to increase the
1301 maximum number of volumes in a Pool during the add command.
1302 This patch fixes bug #1008.
1304 Release Version 2.2.6
1306 db Remove extra data on estimate command in joblist for bat.
1308 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1309 really change anything, but is the beginning of doing it *right*.
1310 To do it completely right the LastWritten date must be passed to
1311 the SD, but it is not yet done.
1312 kes Minor tweaks to some bat restore SQL.
1313 kes This patch fixes bug #1003 where putting the message output from
1314 a Verify job into the catalog results in a recursive loop. The problem
1315 seems to show up only with postgresql (to be verified).
1316 kes Correct %x to %p in postgresql debug statement.
1318 kes Fix bug #942 where lots of emails where generated when the heartbeat
1319 interval was low and Bacula wanted a different tape from the one in
1322 ebl Add new SD despooling attributes and Dir inserting attributes
1323 job status codes in the catalog (Status table).
1325 ebl Use qmake-qt4 instead of qmake when available (debian system).
1327 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1328 that passing the password via the command line (arg 3) is insecure.
1329 This responds to bug #990 (it doesn't fix it).
1331 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1332 kes Fix a crash in bat when it cannot connect to the Director for example
1333 if the Director is not running.
1334 kes Remove redundant INDEX (JobId) from File table in the trunk.
1335 This fixes bug #992.
1336 kes Make explicit exception to GPL in LICENSE to permit linking
1337 the Win32 FD with Microsoft VSS code.
1338 kes Apply the Solaris package patch from
1339 Masopust, Christian <christian.masopust@siemens.com>
1340 kes Apply the patch to optionally add a timestamp in the debug output
1341 submitted by Mariusz Czulada <manieq@wp.eu>.
1343 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1344 backend (sql_strerror). Fixes bug #989
1346 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1347 It applied with no problems.
1348 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1349 awk are on the path.
1350 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1351 since the status is returned on stderr on Solaris.
1352 kes Activate Close button on tray-monitor window. This fixes
1354 kes Check for NULL item in parse_conf.c before calling it. In the
1355 case of Device, there is no item and this caused a seg fault when
1356 Device appears in the conf file.
1357 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1358 avoids pulling in config.h multiple times in some new code.
1360 kes Fix spurious warning message printed when creating a volume with
1361 a LabelFormat. This fixes bug #976.
1363 Release Version 2.2.5
1365 kes Add JobId in place of Job name in all the Jmsg() output.
1366 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1368 kes Make maxvol-test and new more strict maxvol2-test work.
1369 kes Print JobId in all Jmsg() job output.
1371 kes Add new SD despooling attributes and Dir inserting attributes
1372 job status codes. This fixes bug 961.
1373 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1375 kes Fix doc issue. This fixes bug #963.
1376 kes Fix listing performance problems in bat. Pointed out by
1378 kes Remove old debug code.
1379 kes Fix bat code that tests for Win32. This should fix bug #968
1380 kes Query 5 list wrong Vol after migration. This fixes bug #960
1382 ebl Fix #969 where user can't change Replace option in restore menu.
1384 kes Save jcr in thread specific data (tsd) for each thread.
1385 kes Make Dmsg() print JobId as -%u.
1386 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1387 for the thread if it exists.
1388 kes Remove old reservation debug jid code.
1389 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1390 ebl Add an option that permit to specify spool size in job
1391 definition. (Applying patches/testing/spoolsize_per_job.patch).
1392 You must upgrade SD and DIR at the same time.
1393 dvl Add new configuration item --archivedir
1394 dvl Adjust regression tests to use tmp not /tmp. This will allow
1395 multiple concurrent runs of the regression tests.
1397 kes Fix race condition that drops final block written to volume.
1398 This happens in rare cases with multiple simultaneous jobs
1399 when the Volume fills. This fixes bug #964. May be related
1400 to bug #935 and possibly #903.
1401 kes Eliminate more strerror() and replace with bstrerror().
1402 kes Remove BSD getopt and replace with unrestricted IBM version.
1403 kes Fix Win32 build for changed calling sequences.
1404 kes More tweaks to the mount volume routines to get everything
1405 right. Changed variable name from find to have_vol, which is
1406 much easier to understand.
1407 kes Enhance btimer debug code.
1409 kes Fix FD->SD authorization failure, which was due to spurious
1410 wakeups from a pthread_cond_timedwait(). Simply check the
1411 predicate before continuing. This fixes bug #953.
1412 kes Add const char where needed (more to do). Remove temp debug code.
1414 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1415 kes Don't overwrite error message in check_tables_version.
1417 kes Unlock batch insert tables with same calls used elsewhere.
1418 kes Allow starting 59 jobs a second.
1419 kes Make SD session key more random.
1420 kes Add retry for SQLite opening db if it fails. Probably helps
1422 kes Suppress extra error messages during batch insert failure.
1424 kes Add jcr to timer packets so if killed message can be sent to job.
1425 kes Add JobId to all Dmsg() output.
1426 kes Put some FD auth code on dbglvl rather than fixed.
1427 kes Return insert attributes error message in db msg buffer to avoid
1428 false error messages. Helps fix bug #966.
1429 kes Separate batch init error messages. Probably helps fix bug #966.
1430 kes Make SD code that contructs attribute insert check string lengths
1432 kes If Dir gets an error during inserting attributes, cancel SD.
1433 This reduces unnecessary error messages.
1435 kes Correct search boolean for getting Volume info
1436 ebl Cleanup batch insert code. Probably fixes bug #965.
1437 kes Back out one small change to the reservation system (reserving a volume).
1438 kes Rework how a Volume is mounted. It is now much more intelligent and
1439 will always attempt to use any mounted volume if possible and reduces
1440 calls to the Director asking about volumes.
1442 kes Turn off some code when batch insert not enabled.
1443 kes Edit FD name in connect error messages.
1444 kes Rework the reservation system to take into account that the Director
1445 might give us a Volume that is different from the current one being
1446 used, and to ensure that we don't exceed Maximum Volume Jobs.
1447 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1448 fatal error with multiple jobs running'
1449 kes Add more debug code in reservation system.
1450 kes Implement maxvol-test to check bug #947.
1452 kes Add code to handle tray monitor separated from Win32 FD.
1453 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1455 kes Add missed return in fixing verify bug -- trunk only.
1456 ebl Fix a command parser issue causing a director segfault.
1457 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1458 This fixes bug #954.
1459 kes Increase the max block size to 4MB fixes bug #957.
1460 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1461 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1462 is not properly mounted (recognized) during a poll.
1463 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1464 Job that has differences reports Verify OK.
1465 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1467 ebl Add an option to operate on all pools with update vol parameters.
1468 This complete the project 20. Patch from Nigel Stepp.
1469 ebl Add history support to bconsole when using readline.
1470 Using Ctrl-D to exit doesn't update .bconsole_history
1471 kes Modify new volume algorithm to use max MediaId for generating next
1472 volume number rather than the count of Volumes. This should essentially
1473 eliminate the failure rate if some volumes were deleted. Bug #921.
1474 kes Begin implemention of Optimize Job Scheduling.
1475 kes Implement restore callback that Dirk and I agreed on for bat
1476 restore. This fixes bug #928. Restore of backup of zero files fails.
1477 kes Fix SQL Catalog logging which broke with new db_escape_string
1480 Release Version 2.2.4
1482 kes Fix bacula_cats.def for new db_escape_string().
1483 kes Increase size of name string when FD making connection to SD.
1484 May fix bug #953. FD->SD connection failure.
1486 kes Add code to help Dan debug 2drive-incremental-2disk test.
1487 kes Add code to try to fix bug #908.
1488 kes Add waits to multiple exit detection code to try to force pid
1489 file to always be deleted.
1490 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1491 This fixes bug #950.
1492 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1493 trying to switch drives by checking for blocking before unblocking.
1495 kes Cancel storage daemon in all cases where FD reports error. This
1496 should fix virtually all cases of bug #920.
1497 kes Fix db_escape_string() for MySQL which did not compile.
1499 kes Fix error message that was clobbered when Dir tells SD it does not
1500 have write permission on Volume. This should fix a minor point
1501 in bug #942, but not the main problem.
1502 kes Add code to cancel job in SD if FD connection fails. This should
1504 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1505 dvl Pass jcr and db into db_escape_string() to enable better escaping
1507 kes Fix migration code to get correct Volume name with multiple volumes
1508 by skipping |. Fixes bug #936.
1509 kes Implement patch supplied by Landon to fix bug #944 where using
1510 TLS with bconsole uses 99+% of the CPU.
1511 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1513 kes Move patches into patches directory.
1515 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1518 ebl Using 'm' in bconsole will show messages like before,
1519 and not memory usage.
1520 kes Fix bug #935, and probably also bug #903 where files were not
1521 restored. MediaId was not properly set in JobMedia record after
1524 kes Suppress chown and chmod error messages if the FD is not running
1527 kes Apply Martin Simmons' patch that should turn off the new API usage
1528 when batch insert is turned off allowing building on older
1530 kes Add ./configure search in qwt-qt4 for qwt package
1532 kes Bacula is now free of 3rd party GPL copyrighted code!
1533 kes Remove idcache.c
1534 kes Add guid_to_name.c/h which replace idcache.
1535 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1537 ebl Detect if new PosgreSQL batch insert API is present.
1538 kes Correct incorrect mempool call causing Director crash. Occurs on
1539 systems without va_copy().
1540 sb Update spec files for 2.2.1 release
1542 kes Fix memory pool call in ua_output.c. bug #934.
1543 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1544 Add test program to fnmatch.c
1546 kes Integrate patch to README.vc8 from
1547 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1548 edit it to get it into Unix patch format.
1549 kes Implement mkpath.c to replace old FSF makepath.c
1551 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1553 Release Version 2.2.1
1555 kes Update POTFILES.in
1556 kes Cleanup a few underquoted AC_DEFUNs in configure
1557 kes Apply patch from Martin Simmons that adds a test for va_copy to
1560 kes Fix bug #921 by increasing the number of tries to create a new volume
1562 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1563 can be called multiple times. Implement a version for machines
1564 without va_copy() that gets a big buffer.
1566 kes Integrate more portable zone offset code into bsmtp.c
1567 Submitted by Attila Fülöp.
1569 kes Fix bad SD->FD return status reported by
1570 (James Harper) <james.harper@bendigoit.com.au>
1571 ebl Fix a bug in read_close_session which return random status
1572 thanks to James Harper
1574 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1575 and directory names during restore of single file/directories.
1576 kes Add sanity checks to .sql command when string is empty. Hopefully
1577 that will resolve Dirks Director crash.
1579 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1580 in the bsmtp chat subroutine when debug is >= 10.
1582 kes Fix Director crash when running bat SQL queries.
1583 kes Add David's notes on Item 8: Copy pools.
1585 kes Rework projects file to be current and ready for a vote.
1586 kes Enhance lex scanner error message.
1588 kes Tweak LICENSE file to mention BSD code.
1589 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1590 if specified on the ./configure.
1591 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1592 This class is intended to allow us to open a second bsock to the
1593 Director while in the restore subdialog.
1595 kes Fix configure to create bat Makefile before creating dependencies.
1596 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1597 kes Add a tooltip to the tray monitor.
1598 dvl Set the Director's PID file before dropping privs. This fixes
1601 kes Update AUTHORs file
1602 kes Increase the default max concurrent jobs to 20 in FD and SD to
1603 correspond with the default .conf files.
1604 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1605 some different, of the same file created by RN when porting the
1607 kes Rearrange some of the Win32 directories and the placement of the files
1609 kes Set DEVELOPER flag in version.h
1611 ========================================================================
1612 Release Version 2.2.0
1614 kes Apply a second doc patch from Marc.
1615 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1616 improves the tips section that discusses how to setup multiple
1619 kes Update bat README file.
1620 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1621 corrects a typo in the Recycle status check in db_find_next_volume().
1622 This will probably fix a number of annoying problems with multiple
1624 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1625 bnet calls -- no functionality change.
1627 kes Modify the Verify output to specify if files are missing on
1628 the Volume(s) or disk. Fixes confusion in bug #916.
1629 kes When more than one Volume is read in a migration job, the last
1630 Volume bytes reported are from the last read volume rather than
1631 the last written volume. Fixed. This fixes bug #910.
1632 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1633 It previously printed New Recyle flag is: no. This fixes bug
1636 kes Correct seg fault when switching tape drives during restore.
1637 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1638 be used until after 2.2.0 release.
1640 kes Remove fnmatch() in SD that permitted wild card specifications.
1641 This fixes bug #914.
1643 kes Fix %g in filename returned by SQL for browse tree reported by
1645 kes Fix configure so that it puts config.out in the cwd rather than
1647 kes Attempt to fix the locking problem reported by Eric in bug #906.
1648 kes Make berrno class to leave errno unchanged after constructor call.
1649 kes Make bnet_server use the heap rather than the stack to allocate
1650 its socket fd pointers to avoid a crash at termination. Problem
1651 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1653 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1654 and putting it in depkgs-qt along with Qt4.3.
1656 kes Rework code in acquire.c that switches drives for reading when
1657 the Media Type does not match. This should fix bug #906
1659 ebl Fix a director segfault during job setup #907
1660 kes Correct seg fault in postgresql when first operation returns no
1661 rows. Fixes Dirks File browser problem seg fault with bat.
1663 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1664 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1667 kes Implement PopUp YES/NO dialog for bat.
1669 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1671 kes Correct RunScript to terminate job in FD on failure.
1672 kes Change abort_on_error and AbortJobOnError to fail_on_error
1673 and FailJobOnError in RunScripts.
1674 kes Minor tweaks of code formating in RunScripts, principally to
1675 avoid depassing 80 columns.
1677 kes Eliminate one #ifdef Win32 in bsmtp
1678 kes Implement grow tool to grow a file for testing very large databases.
1679 kes Add big-vol-test to test Bacula seeking with > 5GB.
1682 kes Modify find_next_volume() to return all values in Media record.
1683 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1687 kes Update Release notes
1689 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1690 Warning, in previous beta version, all media get from scratch keep their
1693 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1694 This should fix bug #842. Made a note to look at removing the temp
1695 files at the end of the install.
1696 kes Add ability to mount and unmount a file device providing it is
1697 marked as being removable and has the appropriate mount and unmount
1698 commands defined in the Device resource. This fixes bug #830.
1699 kes When applying a storage override, release all previous storage
1700 definitions rather than just prepending the new storage.
1701 This should prevent a good deal of confusion.
1703 kes Implement ./configure search for qwt libraries.
1705 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1706 Win32 FD. This should fix bug #893.
1707 kes Remove an unnecessary beep in Win32 init code.
1708 kes Update copyright dates in Win32 executable about boxes.
1709 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1710 code with a BSD getopt.c and getopt.h.
1711 kes Remove sched.h from the Win32 compat directory -- not used.
1712 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1713 need to shut it down, do it through the services panel or the command
1715 kes Remove some inappropriate Bacula FSFE copyrights.
1716 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1717 kes Fix regress config non-portable test as pointed out by
1718 Florian Heigl <florian.heigl@gmail.com>
1719 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1720 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1722 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1723 Reported by Frank Sweetser.
1727 kes Fix client-only build.
1728 kes Integrate client-only fixes for bsys (initgroups) and conio from
1729 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1730 kes Make arguments to get_scratch_volume() in same order as other
1732 kes Rework the prune_volumes() subroutine so that after purging and
1733 no volume found in desired pool, it will check for a scratch
1734 volume. This prevents recycling the whole scratch pool.
1735 kes Add code to status storage to print boffset_t (largefile support).
1737 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1738 kes You now need a --with-qwt=<dir> to be able to build bat.
1739 kes Update src/win32/cats/bacula_cats.def to include the new
1740 db_get_query_dbids() call on Win32.
1742 kes Correct a problem when selecting a scratch volume and moving
1743 it to another pool that lost some columns.
1744 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1745 kes Enhance Autochanger error messages to include Volume and device name.
1746 kes Rework prune_volumes() code to take account of InChanger flag,
1747 and to handle recycling volumes going to the Scratch pool and
1748 current pool because the RecyclePool directive.
1749 kes Implement a better and more efficient db_get_query_dbids() to
1750 handle creating and passing back a list of DBIds.
1754 kes Start work on new more efficient DBId subroutine. First use
1755 will be for recycling volume to Scratch inchanger.
1756 kes Increase number of JobIds in pruning from 1000 to 10000.
1757 This to be replaced by above routine.
1758 kes Begin implementation of building Qt4 on Win32.
1759 kes Correct typo in fix I added for bad TLS shutdown.
1760 kes Pull 2.0.3 patches into patches directory.
1761 kes Update Release notes. Include qt-console in line count.
1762 kes Update Projects file.
1764 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1765 bug in migration code where a job that spanned two volumes
1768 kes Implement new BST_DESPOOLING blocked state. Change from locking
1769 during despooling in SD to blocking. This means that other threads
1770 can work with the device structure, in particular the reservations
1771 system while despooling.
1773 kes Fix return in reservation message queue that missed clearing
1774 the jcr lock (implemented 26Jun07 below).
1775 kes Rename a number of dev methods to make locking function names
1777 kes Document locking in lock.c. Move lock structures to new file
1780 kes Move reservations message lock to lock jcr only this
1782 kes Move main SD locking code into lock.c (new file).
1783 kes Update Win32 build to include lock.c
1787 kes Dirk committed the qwt library code for drawing graphs in bat.
1788 kes Tweak install of qwt so that it is integrated with ./configure.
1790 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1791 out by Eric (my typo).
1792 ebl Fix configure.in to get batch mode enable
1793 kes Return correct string from authenticate.cpp in bat when connecting
1795 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1796 spurious line drops when using TLS.
1797 kes Do not file reparse points when restoring a file that already
1800 kes Implement Windows reparse points -- similar to directories, but
1801 we do not descend into it. This is a first cut. They seem to
1802 be backed up, but restore is not yet tested.
1803 kes Remove restore_blocking in tls code when shutting a socket to leave
1804 it in blocking mode. Hopefully this will fix the encryption bug
1805 reported by Frank Sweetser.
1806 kes When opening a file for backup, tell the OS that we are going to
1807 read it sequentially -- optimization.
1808 kes Change variable names in authenticate_director() to not conflict
1809 with member names in bat. Caused great confusion with compiler,
1812 kes Queue openssl error messages in case of comm problem.
1813 kes Do shutdown() call if socket terminated.
1814 kes Remove some duplicated code in tls.c
1815 kes Move more of the bsock member variables into private and access
1817 kes Add Frank Sweetser's tls-test to the regression suite.
1819 kes Add Swedish sv.po file
1821 kes Don't print clock skew message in FD if less than 3 seconds diff.
1822 kes Add a bit of VSS info to status client.
1823 kes Implement a first cut of Vista VSS, using Win2003 code.
1825 Release: 2.1.20 beta
1827 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1828 loaded tape but uses first drive).
1829 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1830 This was indeed a Win32 issue.
1832 kes Simplify search of autochanger for in-use Volume.
1833 kes Fix exit condition of check for in-use volume. kes Remove
1834 inappropriate my_postgresql_free_result() in db_close()
1836 kes Fix bad return in FD when encryption signature not found.
1837 Probably caused a crash.
1838 kes Inhibit missing encryption signature error messages for
1839 file types where no signature computed.
1840 kes Correct inverted check on autochanger in reservation system.
1841 kes Tweak debug code in autochanger reservation.
1843 kes Add some additional locking in the cats directory in subroutines
1844 that modify packet variables called from batch insert.
1845 kes Rework how dcrs are allocated. new_dcr() can now be called
1846 with an existing pointer, and it will simply clean it up.
1847 This allows the reservation system to test various different
1848 devices, and will permit easy device changes.
1849 kes A bunch of changes all over to handle new new_dcr() calling
1851 kes Work more on the Volume management in the SD. Remember Volumes
1852 for tape drives and for autochangers (even virtual disk changers).
1853 kes When looking at the Volume list to reserve a drive, handle
1854 autochanger names correctly by interating through the changer
1855 devices. Also call the Director to see if a Volume is suitable
1856 for the current job.
1857 kes Fix some bugs in bscan. Make sure all media records are written.
1858 Make sure that valid JobMedia records are written for disk files.
1859 Previously they were completely wrong.
1860 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1861 that the URLs don't change and so that the developers will all
1862 work off the same copy. Rebuild from scrach.
1863 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1865 Release: 2.1.18 beta
1867 kes Fix seg fault in FD from incorrect digest size.
1868 kes Fix argument to non-OpenSSL crypto.c subroutine.
1870 Release: 2.1.16 beta
1872 kes Remove a few malloc()s from the encryption code.
1873 kes Use the class calls to bsock in filed/backup.c and restore.c in
1874 place of the old bnet_xxx code.
1875 kes Implement code that does an on the fly calculation of the
1876 signing digest during restore of encrypted files. It makes
1877 a best guess at the algorithm, and if it is not correct, will
1878 then revert to the old code which reads the file after it is
1880 kes Implement at least one missing crypto stream in stream_to_ascii()
1881 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1882 #877 where a reload with bad syntax causes Dir to exit.
1884 Cut: 2.1.14 beta (not released)
1886 kes Do not free a volume on a tape drive until another volume is
1887 mounted and read, or the autochanger unloads the volume.
1888 This should help the SD re-use volumes that are already mounted,
1889 and should fix bug #886.
1890 kes Apply patch from user brettedgar that allows gnome2-console include
1891 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1892 kes Apply patch from Lucien Weller that fixes day of week calculation
1893 because of DST flag problem. Fixes bug #887.
1895 kes Move find_next_appendable_volume() to after acquiring a valid device
1896 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1898 kes Unable to reproduce bug 872. However added additional testing for
1900 kes Bug #874 resolved by documenting SQLite limitations.
1901 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1902 kes Bug #881 resolved by removing typo in mtx-changer script.
1903 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1904 approval. Added a link to the wiki on the web page, and implemented
1905 a backup from http://paramount.ind.wpi.edu
1907 kes Fix update allfrompool to pass pool name.
1909 kes Convert to pure GPL v2 license.
1910 kes Fix sscanf problems reported by Peter Buschman that caused
1911 a bus error on Solaris.
1912 kes Rework (simplify) the select prompt in bat.
1913 kes Move get_jobid_from_tid() into lib and create a
1915 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1916 should definitely fix the problem of lost error messages in the
1918 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1919 kes Eliminate tcpd.h from the project. Enclose the #include from the
1920 library with extern C ...
1921 kes Add print of signal name when a signal is trapped.
1923 Release: 2.1.12 beta
1925 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1927 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1928 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1929 makes SQLit3 run 30 times faster, though a bit less safe.
1930 kes Implement --with-batch-insert in configure and detection of thread
1931 safe libraries. It is on by default, but turned off if no thread
1932 safe library (e.g. SQLite 2) is available.
1934 kes Fix Bacula PostgreSQL buffer overruns.
1935 kes Do better checking for NULL results returned from PostgreSQL;
1936 implement retry for failed queries; clear results buffer after
1937 failed query. Hopefully this will correct the PostgreSQL failures.
1939 kes Implement algorithm to handle only one appendable volume with
1940 Prefer Mounted Volumes = no.
1941 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1942 returned from a query.
1943 kes Make volume lock recursive.
1944 kes Implement an additional volume reservation algorithm that
1945 starts by considering all reserved volumes then uses the
1946 old brute force algorithm of searching the resources to
1947 find a suitable device.
1948 kes Add new reservations debug code and refine the old code.
1949 kes Update the win32/dll/bacula.defs file.
1951 kes Tweak reservations algorithm to permit a few more cases, i.e.
1952 volume reserved, but on different drive, ...
1953 kes Enhance SD status to include Pool and Media Type for drive in a
1954 more readable format (a bit longer).
1955 kes Fix PostgreSQL double free.
1957 kes Minor refactoring of restore decryption code.
1958 kes Add code to smartall.c to detect double free of a buffer.
1960 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1961 so that bsmtp will create a correct email address (mailbox only).
1962 kes Modify 'memory' command so that the buffers are listed as 'In use'
1963 to avoid confusion with Orphaned buffers.
1964 kes I reworked the OpenSSL include/lib flags to be handled in
1965 the standard Bacula way, which should fix bug #863 concerning
1966 non-standard OpenSSL libraries.
1968 kes Implement Help Browser window for bat.
1969 kes Fix reload bug that reset StorageId to zero.
1971 kes Fix TLS #ifdefing when TLS turned off.
1972 kes Ensure that when labelling a tape with Slot=0 that InChanger
1974 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1976 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1977 add DISTINCT (required by PostgreSQL).
1978 kes Implement BSOCK authenticate_director() method. Eventually will
1979 authenicate all daemons.
1980 kes Move several more functions into the BSOCK class.
1982 kes Add code to tell the OS that we no longer need a cached
1983 file that we were reading. In findlib/bfile.c. Also,
1984 only cache files that we are reading. Thanks to
1985 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1986 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1987 kes Implement script to automatically generate cats and dll .def
1988 files for Win32 dll.
1989 kes Update README.mingw32 to include new .def file generation.
1990 kes Correct typo in UTF-8 error message as reported by:
1991 jhernandez <julianhernandez@gmail.com>
1992 kes Add additional sm_check() code on debug level 1.
1993 kes Set default debug level to 1.
1994 kes Trap SIGABRT in attempt to get traceback.
1996 kes Reduce bat connect timeout from 30 to 15 seconds.
1997 kes More restructuring and implementing BSOCK class in place of
1999 kes Remove a few unnecessary malloc() tests in crypto code.
2000 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
2001 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
2002 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
2004 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
2006 kes Fix Verify InitCatalog. The attributes were not pointing to the
2007 correct saved location.
2008 kes Implement message callback so that GUI is sure to get all
2009 daemon messages. Currently displayed in a dialog in bat.
2010 kes Ignore SIGUSR2 (Bacula timer) in bat.
2011 kes Apply regress patch from bug #859 to allow regress to work
2012 with Solaris compiler.
2014 kes Begin adding TLS support to bat.
2015 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
2016 clean up lex.c and make it more readable.
2018 kes Move more bnet functions into the BSOCK class.
2019 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
2020 kes Complete change of berrno strerror() method to bstrerror()
2022 Release: 2.1.10 beta
2024 kes Cleanup incorrect email addresses in bsmtp.
2025 kes Make bat display initial messages rather than discard them.
2027 kes First cut of adding .mod to the run command.
2028 kes Implement auto display of messages in bat.
2029 kes Enhanced preferences to allow all Bacula output to be
2032 kes Try to make bsmtp date routines more generic.
2033 kes Fixed bug #856 autochanger documentation.
2034 kes Rework bsmtp date editing for Win32. This fixes bug #854.
2035 kes Add new cats entry point so Win32 builds.
2037 kes Attempt to fix bsmtp date editing on OSes without %z editing.
2039 kes Do better checking for the MySQL 64 bit libraries looking for both
2040 .a and .so libraries.
2041 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
2042 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
2043 kes Require the thread safe version of MySQL during configure. Thanks
2044 to Andre Noll for pointing this out.
2045 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
2046 continuing in migration code.
2047 kes Apply implementation of tray-monitor font derived from gnome-console
2048 submitted by Andreas Piesk <a.piesk@gmx.net>
2050 kes Eliminate important memory loss in SQLite
2051 kes Fixed the batch insert MySQL thread specific data that was not
2052 being freed. See cats/mysql.c:db_thread_cleanup().
2053 kes Fix restore before command.
2054 kes Convert old hdr.name to name() in a few places.
2055 kes Implement update jobid command.
2056 kes Return all time_t dates in db_get_job_record()
2057 kes Stop watchdog in SD earlier.
2058 kes Put Pool just after Storage in please mount message.
2059 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
2062 kes Update the po files.
2063 kes Fix Verify InitCatalog by making it cache attributes.
2065 kes Change name bacula-bat to bat for man 1 page to correspond to
2067 kes Check for client and store NULL pointers in status command. This
2069 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
2070 kes Fix sign extended editing of %p.
2071 kes Clean out a little old #ifdefing in cats/mysql.c
2073 kes If time diff between DIR and FD is more than 600 seconds convert
2074 INFO message to WARNING.
2075 kes Implement heap size display in status for all daemons.
2076 kes Attempt to fix MySQL db open memory loss (not successfull).
2077 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
2078 kes Eliminate memory loss in MySQL (possibly other SQLs) during
2079 Query. This looks like a MySQL but but by doing extra releases,
2080 the memory goes away. This should fix bug #847.
2082 kes When backup fails, cancel SD before waiting for sd termination.
2083 kes If SD is waiting for FD to connect during cancel, wake up the
2085 kes Fix fsf code so that errno is correctly reported.
2086 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
2088 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
2089 so that Bacula doesn't later stumble into a seg fault.
2090 kes Use the term Restore Client in the restore Job report.
2091 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
2092 the original job's FileSetId.
2093 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
2094 spooling in migration jobs. Not yet tested.
2095 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
2096 reading conf file from a pipe. However, do it with open_bpipe()
2097 rather than popen. Not yet tested.
2099 kes Fix an ugly bug where the VolCatBytes were getting updated
2101 kes Implement bconsole memory command that prints current memory
2102 usage, plus smartalloc dump.
2103 kes Clarify some error messages in backup, admin, and migrate.
2104 kes Shrink label dialog to smaller size.
2105 kes Invert Cancel OK buttons on restore to be OK Cancel.
2106 kes More strerror() to bstrerror() conversions.
2108 kes Start implementing bstrerror() in place of strerror().
2109 kes Stripping path -- seems to work.
2111 kes Prevent door and port files from being restored (mostly
2113 kes Free an unreleased buffer in compat code.
2114 kes Change console Job name from *Console* to -Console- to eliminate
2115 Win32 filename problems. Put Win32 path separator when creating
2116 Console file. This fixes bug #846.
2117 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
2119 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
2121 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
2122 to force Win32 error message.
2124 kes First cut strip path. The data should be passed to the FD,
2125 but nothing is done with it yet.
2126 kes Enhance the digest and signature routines in the crypto
2127 library to accept a JCR and to use it to print error messages
2128 so that they will go in the Job report rather than the daemon's
2130 kes Simplify some of the verify signature code.
2131 kes Simplify a few of the alternative returns in the signature
2134 ebl Use only POSIX regex instead of GNU regex in breg.c for
2135 File relocation. It fix broken freebsd compilation.
2136 kes Convert all other Dir files to use new ua class message
2138 kes Tentative fix for missing digest signature in bug 807.
2139 kes Correct handle problem in new win32_ftruncate routine.
2140 kes Convert ua_purge.c and ua_update.c to use new ua class
2141 message routines for bat.
2143 kes Correct incorrect installation of LICENSE in Win32 installer.
2144 kes Display LICENSE at the beginning of the Win32 install.
2145 kes Attempt to correct the need for the png files to be installed
2147 kes Reapply my bat.conf install script in qt-console. I think I
2148 editted bat.pro instead of bat.pro.in and it was lost.
2149 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
2150 the /var/lock/subsys for subsysdir. Also corrects typos in the
2153 kes First cut update job.
2154 kes Correct configure to include qmake of src/qt-console directory.
2156 kes Make restore job yes/mod/no print in one command so GUI works.
2157 kes First cut implementing backup and restore client.
2158 kes Correct editing in Verify output that caused a seg fault.
2160 kes Insure that bat.conf is not overwritten during installation.
2161 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
2162 while I was implementing migration in March 2006 !
2164 ebl Cleanup file relocation, using char *RegexWhere instead of
2165 char *where + bool where_use_regexp
2166 kes Update some manpages and add bat manpage.
2167 kes Make a first cut at converting bacula.spec.in for bwx-console
2169 kes Apply patch from John Goerzen to add hostname as fourth argument
2170 to make_catalog_backup script.
2171 kes Fix typos I introduced into bsmtp.c
2172 kes Make pm_strxxx() routines handle input of NULL pointer. This
2173 is to protect from NULL pointers returned from SQL databases.
2174 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
2175 kes Add more debug to FIFO code -- fix fifo regression test.
2177 kes Implement posix_fadvise in FD, and for reading spool files in SD.
2178 kes Add thread timer to bnet_connect() to break from OS if wait time
2181 kes Update Win32 build to include new files, new symbols, and
2183 kes Implement socket level heartbeat (tcp_keepidle)
2184 ebl Commit File relocation patch
2185 kes Make bat have 'make install' target.
2186 kes Warn during install if old gnome-console binary found.
2187 kes Warn during install if old wx-console binary found.
2188 kes Add -8 option to bsmtp command line to add content type utf-8.
2189 Fixes bug #809. (Character coding problem in bsmtp).
2190 kes If < is found in target (from, to, cc) then do not enclose the
2191 target in < > in bsmtp. Fixes bug #772 (malformed address).
2192 kes When printing certain items in dbcheck, stop after 300000.
2193 Fixes bug #822. (dbcheck loops).
2194 kes Incorrect status in Dir after waiting for mount with poll set.
2197 kes Extend idea of Prefer Mounted Volumes to mean a volume about
2199 kes Print waiting to reserve a device every 5 mins.
2201 kes Don't call close_part in label.c if tape and relabel.
2202 kes Don't free volume if busy in close() -- should help with
2204 ebl Fix #824 RunScript bug (After script could be execute twice)
2205 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
2206 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
2207 Add a regression script to test RunScript
2209 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
2212 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
2213 deprecated. No additional bugs will be fixed, and they will be dropped
2214 in a future release (probably 2.4.0).
2215 kes Change name of wx-console to bwx-console to make it more Bacula
2217 kes Change the name of gnome-console to bgnome-console to make it
2220 kes Some time in March, a Feature Request with patch from Jorj Bauer
2221 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
2223 The ability for the director to validate a Client (FD) CN against
2224 an arbitrary set of patterns rather than the hostname, with
2225 A new 'TLS Allowed CN' set of directives which are implemented
2226 in the Client resource. Then pattern matching is used in place
2227 of hostname matching against the Certificate's CN. As an example, we
2228 have certificates which (a) use a local CA, and (b) have a CN of the
2230 kes Add new/changed entry points to Win32 build
2231 kes Create unaccepted-projects for projects that are not accepted.
2232 kes Simplify locking in the reservations system.
2233 kes Add more debug code in reservations.
2234 kes Make sure error condition on reserving a volume is handled correctly.
2235 kes Correct handling of volume_in_use.
2236 kes Correct handling of initializing a device.
2237 kes Move handling of broadcasting releasing a device into release_device().
2238 kes Correct attaching dcr to dev so that it is only done if device
2239 is properly initiated.
2241 kes Locking debug level tweaks in SD.
2242 kes Tweak new Volume code.
2244 kes Add exec external-command [wait-seconds] to bconsole. This
2245 executes the external-command. Note! normally external-command
2246 should be enclosed in double quotes.
2247 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
2248 it should normally be off in a production system.
2250 kes Implement die command for SD so that we can force it to dump.
2251 kes Implement SD lock debug code.
2252 kes Implement new algorithm for keeping Volume list in SD. It
2253 is now owned by the device.
2255 kes Implement new code for freeing in use volumes that should
2256 resolve if not all, some of the problems of multiple drive
2257 tape conflicts described in bug 801.
2259 kes Fix gui/bacula-web/images files in svn.
2260 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
2262 ebl Fix a bug in batch mode (in string escape)
2263 kes Correct migration prune SQL typo that crept in in a
2264 recent 2.1.x change.
2266 kes Move bnet_despool() into class in bsock.c
2267 kes Modify job report to include director name and Build OS.
2268 kes Move drop root privilege and check_catalog() before fork.
2269 kes Add update database scripts (version 9 to 10) to updatedb directory.
2271 ebl Check size and age of each file after its backup to see if
2272 it has changed during backup, if 'checkfilechanges' is set.
2273 The FD will do an extra check (stat(2)) after
2274 each file backup. mtime, ctime and size are compared with
2275 'before backup' information. If time or size mismatch, an
2276 error message will be generated. You must upgrade FD to use it.
2278 kes Make database name and user configurable
2279 --with-db-name=xxx --with-db-user=xxx
2280 kes Add back database type to message.c for debugging.
2282 kes Implement dir_sql() which issues an SQL query.
2283 kes Modify bat medialist to use dir_sql() and do some minor C++
2284 formatting as well as eliminating a number of pointers, simplifing
2287 kes Fix some of the mtx-changer grep commands for tape label readers.
2288 kes Convert a number of bsendmsg into the appropriate send/warning/error
2289 message class calls.
2290 kes Suppress the using database message in the .sql command.
2291 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
2293 kes Add context menu for floating a window.
2294 kes Some minor cleanup and name changes in qt-console
2295 kes Add doing mt setblk 0 in Win32 mtx-changer.
2296 kes Apply Martin's bug fix to move definition of ENODATA for
2298 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
2299 sqlite2 and sqlite3.
2301 kes More pruning cleanup.
2302 kes Turn on wait_for_drive by default in mtx-changer.
2303 kes Turn on Batch insert code by default as it now passes regression.
2304 kes Add ./configure --enable-bat to enable building of Bat.
2305 No install yet though.
2307 kes Implement a new .sql command for bat.
2308 kes Implement code to turn off pruning in obtaining the next volume.
2309 Pruning is turned off for the status dir command, but turned on
2310 for SD requests and for the list nextvolume command.
2312 kes Correct Qmsg() that was not updated correctly when committing a
2313 previous change (probably the recent TLS patch).
2315 kes Write new subroutine is_volume_purged() that explicitly checks
2316 if the Volume is purged, and if so marks it as such. This should
2317 resolve problems reported about needing to mount twice to recycle
2319 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2320 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2321 amount of duplicated code.
2322 kes Do volume pruning only for the Media Type desired (reduces pruning time
2323 if multiple Media Types are in the same pool).
2324 kes Implement more detailed info in the Job report for the Bacula version
2326 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2328 ebl Add bbatch tool to bench database and insert mode.
2329 Fix sql quote stuff in batch mode
2330 Fix sql stuff for mysql
2332 kes Correct problems with am/pm scheduling. Fixes bug #808.
2333 kes Implement new prunning code that prunes up to 1000 jobs at
2334 the same time. The same technique can be applied to a number
2335 of other prune/purge subroutines.
2336 kes Add an insanity check when starting a new tape job to ensure
2337 that the tape position has not been changed. If so fail the
2339 kes Fix Win32 build for dlls to add the folllowing:
2340 src/lib/bsock.c -- new file with new entry points
2341 src/lib/dlist.c -- new entry points
2342 src/cats/sql_create.c -- new entry point
2343 src/cats/sql_cmds.c -- new DATA item exported
2345 ebl batch mode cleanup bscan-test is ok now.
2346 kes Implement SD code to check length of disk volume before appending.
2348 kes Correct return status on db_batch... routines.
2349 kes Add call to db_write_batch_file_records() to migration code.
2350 ebl Fix AfterJob timing
2351 kes Move the checking of the database in initializion of the Director
2352 to after we drop privileges. This avoids the need for both root
2353 and bacula access to the DB.
2354 kes Correct a misplaced variable definition in src/filed/backup.c
2355 kes Correct how the new batch insert db_create_attributes_record()
2356 uses the arguments. Caused a seg fault in bscan.
2357 kes Implement lock() and unlock() methods in DEVICE class.
2358 Implement block() and set_block(xx) methods in DEVICE class.
2359 kes Modify bnet_connect() so that it uses time() to check for the
2360 wait time expiring (on some OSes, some system calls may not
2361 return immediately).
2362 kes Modify Verify to obtain the previous JobId when it is actually
2363 running rather than at schedule time (as it was in 1.38.x).
2364 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2366 kes When checking pid in pid file, continue running if the pid is
2367 the same as ours. This occurs on IRIX after a system crash.
2370 kes Extend new GUI API.
2371 kes Make the ua structure a class, and implement send_msg(),
2372 error_msg(), warning_msg(), and info_msg().
2374 kes Apply fix from for building wx-console on the Mac from
2376 kes Implement new select mechanism for GUI programs.
2377 kes Reorganize initialization of stackedWidgets in bat.
2379 kes Add updated nagios plugin supplied by Christian Masopust.
2381 kes More bat implementation.
2382 kes File migrate bug with Pool Occupancy using mediaid instead
2383 of jobids. Fixes bug #795.
2384 kes Fix orphaned buffers in filed backup and verify due to
2385 crypto buffers not freed during errors. Fixes bug #789.
2386 kes Extend new GUI api code to tree commands.
2387 kes Ensure that tree and dot commands check console ACLs.
2388 kes Permit marking directory with trailing slash.
2389 kes Allow 20 console connections (instead of only 10).
2391 kes Add smartctl call to bacula-sd.conf as an example of getting
2394 kes Modify jobq.c to let simultaneous restore jobs run. This may
2395 cause them to fail if they cannot get a drive.
2396 kes Add Client Connect Wait to Storage daemon to permit users to
2397 modify the time the SD waits for a FD connection.
2399 kes Correct virtual changer check which was backwards. This caused
2400 volumes to be unloaded into slots already occupied.
2402 kes Apply Command ACL filter to JobId list in restore command.
2403 kes Correct typeo in var.c patch.
2405 kes Don't let Bacula prune File or Job records for the current Job.
2406 kes Fix variable substitution pad + inc bug reported (with patch)
2409 kes Correct SQLite log table index as reported by Luca Berra.
2411 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2413 kes Begin implementing new comm signals for API.
2414 kes Fix a few places in lib/message.c where the open fd may
2416 kes Continue implementing lib/bsock.c (real class). Make jcr,
2417 who, host, and port private. There are new methods to access
2418 them for non-class use. This required touching a number of files.
2420 kes Add LANG=C to autoconf/randpass so it works with languages other
2421 than English. Fixes bug #788.
2423 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2425 You will not be able to generate Include/Exclude list any more.
2426 It will be fixed soon.
2427 If you want to use this, you can apply
2428 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2430 kes Restore of sockets created false error messages because Bacula
2431 no longer restores sockets, but the code was still trying to
2432 set the attributes on a non-existent file. Reported by a user.
2433 ebl finish RecyclePool feature
2434 Media will takes Pool.RecyclePool
2435 when moving from Scratch to a Pool or when user will do
2436 update volume=xxx frompool
2437 To use it, add RecyclePool = aPool to your Pool resource
2440 RecyclePool = Scratch
2444 kes Expand new BSOCK class adding signal() and new BNET signals.
2445 kes Begin enhancing the dot commands adding a new API function
2446 that returns more information and will make it easier
2447 to interface to the Director from a program.
2449 kes Make DEVICE fd private. Its new name is m_fd, and can be
2450 obtained with dev->fd() outside the class. This is the
2451 first of many DEVICE members to be made private.
2452 kes Implement Michael Renner's idea on having a virtual disk
2453 changer. I made some minor modifications (e.g. I did not
2454 implement the Virtual Changer directive, but simply set
2455 the Changer Command to an empty string.
2457 kes Implement a BSOCK send() method that writes the whole record
2458 in a single write() request rather than in two.
2459 ebl add update volume=xxx recyclepool=yyyy
2460 volume takes recyclepool from pool when using update volume=xxx from pool
2462 kes Fix encryption deblocking bug, which caused some restored files
2463 to be truncated. This fixes bug #763.
2464 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2465 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2467 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2468 ebl Use btime_t instead of uint64_t in media patch.
2470 kes Optimize the use of the database a bit in the Status dir command.
2471 Only open it when needed, ensure that if any previous database
2472 was opened, it is closed.
2474 kes Correct VolCatBytes bug from media patch.
2475 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2476 in the case of orphaned records.
2477 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2478 and File records in 300K chunks to be more efficient. This
2479 idea came from Juan Luis Frances (if I remember right).
2480 kes Apply Eric's scratch patch that moves a purged Volume to
2481 the RecyclePool. Question: how is RecyclePool set? what
2482 happens to the ScratchPool?
2483 kes Apply Eric's media patch that collects read/write media
2484 times as well as byte counts. This patch requires a
2485 simultaneous upgrade of the DIR and SD. Note, there
2486 should be some way to turn off timing. I'm not sure
2487 times are in Bacula units.
2488 kes Apply Eric's batch-insert patch.
2490 kes Update projects list.
2492 kes Implement Include/Exclude file lists in FD as dlists using
2493 the new dlistString class. This permits efficiently having
2494 large include/exclude lists and completes project Item 25.
2495 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2496 console is authorized to cancel the job. This fixes bug
2498 kes Modify SD so that the VolCatJobs medium record is updated
2499 at the beginning of a Job rather than the end. This
2500 fixes bug #775 where exceeding MaxVolJobs caused jobs
2502 kes Added a mutex around getting and setting Volume information
2503 so that multiple simultaneous jobs will single thread.
2505 Switch to using Subversion
2506 kes Remove src/pygtk-console/ from configure
2508 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2509 plus the entrypoints.
2510 kes Apply patch supplied that corrects debug print
2511 in canceling jobs for max run time. Supplied as
2512 part of bug #621, which was previously fixed.
2514 kes Test on job_canceled() and sd_msg_thread_done inside
2515 loop starting the message thread to avoid a race condition.
2517 kes Remove rl_catch_signal from console.c as it conflicted
2518 with the header definition. Fixes bug #765.
2519 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2521 kes Clarify some stored/acquire messages to indicate if the
2522 problem is with read or append.
2524 kes Fix memory leak with storage ids in cats/sql_get.c
2525 kes Terminate watchdog earlier to avoid reference to released
2526 memory -- reported by Jason Austin.
2527 kes Move closing the database from jobq.c to the director daemon
2528 termination routine. This fixes memory leaks for shadow jobs
2529 (i.e. migration jobs).
2530 kes Free up the unique jobid chain items in migrate.c. This fixes
2531 a memory leak problem.
2532 kes Convert some ugly looking for statements to use foreach_alist
2533 in findlib/find.c. This will facilitate converting the structures
2534 to use dlist (for large include/exclude lists).
2535 kes Fix a bug in the btree.c and btree.h routines, then rename them
2536 rblist and add them to be built in src/lib. Include some new
2537 methods written by Rudolf Cejka that make the code more readable
2538 (hides some of the ugly casting).
2539 kes Add set_next() and set_prev() methods which make the code much more
2540 readable. Also add a new dlistString class that facilitates storing
2541 strings in dlists. To be used in the large include/exclude lists.
2542 kes Make some trivial modifications to lib/tree.h that use rblist
2543 rather than dlist for storing the tree links. This was suggested
2544 by Rudolf Cejka. The result of this is that the restore tree now
2545 uses red-black binary trees rather than simple linked lists. This
2546 should give rather dramatic speed improvements for directories
2547 contining large numbers of directories/files (more than 10000).
2549 kes Fix maxruntime bug #621.
2551 ebl Implement the include JobID in spool file name project.
2552 kes Reorder projects file in order determined by Jan 2007 vote.
2553 kes Implement item #12 on project list -- quick release of FD by
2555 kes Fix open of SQLite3 db where user does not have write permission
2556 so that DIR does not crash. Fixes bug #761.
2558 kes Add back missing @ in Win32 Makefile.
2559 kes Change 'Device not configured to autolabel' from INFO
2561 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2562 which should restart an indefinite # of times.
2563 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2564 other DIR specifications.
2566 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2567 Fix path quoting in SQLite scripts.
2568 Fix problems with SHGetFolderPath.
2570 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2572 kes Fix Job restart on error bug that promotes an Inc to a Full
2573 backup. This should fix bug #755.
2574 kes Add qt-console and first cut of code.
2578 kes Fix Bacula->Documentation link on Win32 to point to index.html
2579 instead of bacula.html. Fixed bug #750.
2580 kes Return JobId in db_get_job_record() when JobId==0. This should
2582 kes Do not release source pointers when restarting a failed job.
2584 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2585 This *should* fix bug #747.
2586 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2589 kes Modify USTORE constructor to set an empty store_source string,
2590 and don't copy the store_source string in a cancel. Hopefully
2591 this will fix Arno's seg fault, bug #744.
2592 kes Add back code to disable conio in configure. Fixes bug #743.
2593 kes Correct the Options scanner in the FD to correctly handle
2594 SHA1 option, which was eating the next option. Reported by
2596 kes Add code to indicate when the SD is spooling, spool wait, and
2597 despooling as requested by Alan Brown.
2599 Version 2.0.0 released: 4 January 2007