1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
34 ebl tweak bat for win32 compilation
36 ebl Remove tokyo cabinet from the source
37 ebl Update configure/autoconf to support berkeley DB
38 ebl Add a sort to db_get_file_list() to improve bsr construction time.
40 kes Add a mtx-changer.conf file that is not overwritten during
41 an upgrade. It fully configures the mtx-changer script.
42 kes Clear in-use bit on vol when unused while swapping.
44 kes Remove sleep at end of ./bacula
45 kes Clear hash packet for hardlinked files correctly. This corrects
46 a long standing bug where hardlinked files selected individually
47 would occasionally not be restored.
49 kes Apply Eric's patch to ensure that autoprune does not return
50 a Volume not in the autochanger unless requested to do so.
51 kes Correct bat restore display of multiple drives. This fixes
53 kes Do find_a_volume() each time an unload is done. This
54 fixes the failure of maxvol2-test.
56 kes Add some SD debug code.
57 kes Do find_a_volume() each time an unload is done.
58 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
59 and adds --with-db-port to ./configure.
60 kes Use Qmsg() in job.c watchdog callback.
62 kes Release main control rwlock if ABORTing.
63 kes Make watchdog connect timeout queue messages rather than sending
64 directly to avoid lock conflicts with the real thread.
65 kes Add const char in dbd.c to avoid compiler warnings.
66 kes Fix python compiler string warning. Note, IMO the GNU C++
67 compiler guys have made a *very* bad change to their compiler.
68 They now force all strings to be 'const' unless you explicitly
69 cast them, which is extremely ugly and ruins nice code as well
70 as creates a lot of useless work.
72 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
73 mt. This fixes bug #1116.
74 kes Add const in python files to reduce compiler warnings.
75 This may have to be backed out because of later compiler
77 kes Fix failure of 2drive-concurrent-test. Always read label;
78 clear_unload() only after drive is defined in acquire_for_read().
80 kes Generally clean up the manual tape loading code. The main
81 conceptual change is that when a volume is marked to be unloaded,
82 its volume name is retained, and it is only marked as unloaded
83 when either the autoloader says it is unloaded or another tape
84 is read on that drive.
86 kes Add debug code and refactor subroutine in stored/mount.c
87 kes Fix format problem in bscan output reported in bug #1105.
88 ebl Fix get_next_volume_for_append logic with autochanger
89 - use pruned volumes if found
90 - don't reset the inchanger flag after getting a recycled volume
92 Fix recycle_oldest_purged_volume to take InChanger flag in account
94 ebl Add mmap/unmmap implementation for tokyodbm under win32
96 kes Make first step toward eliminating globals from config
97 scanning. Also should be a workaround for FORTIFY_SOURCE
98 GNU C bug -- fixes bug #1042.
100 kes Apply duplicate job tests to restarted jobs.
101 kes Copy more data when restarting a job so that run
102 overrides are kept. This should fix bug #1094.
104 kes More word alignment cleanup.
105 kes Fix bug where SD did not ask operator if the device could not
106 be opened. Reported by Eric.
108 kes Add dbuser to DIR conf file (replaces user).
109 kes Add --with-db-password to ./configure
110 kes Fix regress to handle db_password.
111 ebl Add new "status storage slots" that list autochanger
113 ebl Update vtape driver to compile only under Linux.
114 ebl Fix a bug when restoring with a wrong mediatype.
116 kes Eliminate ints from conf files and structures to avoid
117 word alignment problems
119 kes Fix bug reported by Scott Barninger where the bacula script
120 refers to scripts in the wrong directory. Needed to meet the
121 requirements of recent FHS location changes.
122 ebl Disable vtape for FreeBSD.
124 ebl Modify disk-changer to check if slot contains something before
127 ebl Fix vtape on win32 and debian.
128 ebl Fix autoselect patch (cause segfault).
130 ebl Fix autoselect option broken for a while. Fix #1089. Need some
131 work with StorageId to be able to use a particular drive in a
134 ebl Rename vtape to vtape.
135 ebl Update vtape driver.
137 ebl Modify vtape driver to avoid sparse file.
138 kes Add make clean of qt-source directory during ./configure
139 kes Store last block number written to tape in DEVICE and
140 use it for testing for correct last block on EOT.
142 Release Version 2.4.0:
146 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
147 This fixes bug #1095.
149 kes Add create_postgresql_database.sql to Win32 installer. Should
150 fix problem reported by Juilio Monteiro.
151 kes Get correct slot when auto unloading a device. This fixes bug
154 kes Fix multiple media restore.
155 kes Make DEVICE Slot private and access it via a method.
156 Allows better control over when it is set and cleared.
157 kes Fix possible seg fault if SQL error.
159 kes Add Martin's fixes to argument scanning for the estimate
160 command. This fixes bug #1093.
161 kes Add debug code to SD.
162 kes Fix renaming a Volume, which used the wrong Volume name.
164 kes If operator has rewind tape, print warning, release tape and
165 try once more. If tape is positioned somewhere, something went
166 wrong, so mark the tape in error and try once more. Previously
167 this error was fatal, now it produces an error message.
168 kes Ensure correct volume name displayed during restore
169 kes Ensure that Volume is mounted for restore.
171 kes Fix a few more Coverity reported problems.
173 kes Apply Allan Black's status dir job count patch.
174 ebl Add information about IMPORT/EXPORT slots in mtx-script.
175 kes Enhance a couple of SD debug messages.
176 kes Tweak unload flag setting and ensure it is set during swap.
178 ebl Fix #1091 about bad output in estimate command.
180 kes Modify autochanger locking to attempt to avoid race
182 kes Make sure device not busy before doing label command.
183 kes Display open() errors except when polling. Previously too
184 many were suppressed. This should fix bug #1070.
185 kes Fix Win32 reparse points. Bacula will not recurse into any
186 reparse point directory, including mount points, unless the
187 directory is explicitly mentioned at the top level (same as
188 with Unix). A file that is linked to another file will be
189 backed up -- much as Unix does for hardlinked files.
190 This fixes bug #1041.
192 kes Remove double quotes from ChangeLog and ReleaseNotes
193 kes Remove StorageId test when pruning and recycling (Eric's changes).
194 kes Remove old form of locking when getting volumes -- causes deadlock.
195 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
196 the name unique and to eliminate compile time error.
197 kes Add accurate.o to Win32 FD Makefile
199 kes Fix cats dll build on Win32 after db_update_job_end_record
200 calling sequence change.
201 ebl Switch to tokyo dbm instead of htable in accurate code
202 ebl Include tokyo dbm to bacula source tree
204 kes Fix buffer overruns detected by Coverity.
206 kes Tweak joblog display.
208 kes Implement --without-qwt
209 kes Fix layout of restore tree dialog
210 kes Add configure bat QWT libraries, so that bat can be built
211 with or without the QWT libaries.
213 ebl Add dummy tape driver for regression tests.
214 kes Make sure we unload the right slot when swapping.
216 kes Add debug times, reduce size of two-pool-changer test
218 ebl Tweak autoconf scripts for vtape
220 kes Improve SD reserve debug code.
221 kes Testing an improvement to free up volumes no longer in use.
223 kes Rework SD acquire for read to handle autochanger Volume
225 kes Implement regression that explicitly tests swapping a Volume
226 from one drive to another.
227 kes Enhance disk-changer to detect most error conditions.
228 kes Fix SD code so that it properly swaps a Volume between drives.
229 This fixes bug #1083.
231 kes Apply libdbi patch from Joao Freitas for regress and for
232 Bacula trunk. Regress now works with libdbi. Nice.
233 kes Apply .nobackup patch from bug #1077 submitted by
235 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
236 name into jobs cloned via the run directive.
238 kes Prevent a Volume that is being swapped from being freed from
239 the volume list. This will most likely fix, at least partially,
241 kes Fix strippath so that it does not get a buffer overrun and crash FD.
242 This fixes bug #1078.
243 kes Remove 50 millisec wait in SD that broke debugger.
244 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
245 that a job may run, counted from when the job was scheduled.
246 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
247 a job may block waiting for a resource, counted from when the job starts
248 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
249 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
250 that implements multiple commands per line in the console when using
251 readline. Modify the default to use a semicolon as the command separator.
253 ebl Fix SQL query in migration code.
254 ebl Make accurate mode with hash disk pass regression tests
256 ebl Implement first cut of accurate backup with hash disk.
258 kes Force unload of volume when wrong volume mounted in SD.
260 kes Fix bat seg fault at termination.
261 kes Add Bacula generated version to bat about box.
264 kes Experiment with allowing multiple read jobs.
265 kes Move final volume swapping code to DCR method and
266 call it from acquire_for_read().
267 kes When wrong volume is mounted during read, unload_autochanger.
269 kes Integrate the libdbi changes from Joao Henrique Freitas
271 kes Stop searching for Volumes in SD askdir if DIR returns the
272 same volume name twice in a row.
273 kes Close bat console windows first to eliminate error message
276 kes Tweak the swap Volume from one drive to another code so that
277 it now seems to work.
278 kes Resolve several problems with recycling that broke the new
279 code (these problems are in 2.2.9 as well).
280 kes Remove the volume lock when calling the sysop code.
281 kes Don't mark a reserved volume with no writers as unused otherwise
284 kes Rework class structures for VOLRES, DCR, and DEVICE to make
285 the method names a bit more logical, and for more logically
286 handling the responsibilities.
288 kes Remove redundant code in terminating the scheduler that just
289 causes a seg fault in many cases.
290 kes Cleanup releasing a volume and make it a DCR method.
291 kes Improve algorithm for detecting pre-reserved volume and
294 kes Tweak volume swapping code so it works.
295 kes Correct name overloading in mount.c
296 kes Replace released flag in VOLRES with reserved and add access
297 methods for the VOLRES class.
298 kes Prevent volume from being released while being swapped.
299 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
301 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
303 kes Refactor parts of stored/mount.c
305 ebl Add sanity checks for VolWriteTime and VolReadTime
306 ebl Take care of bad clock changes while computing VolWriteTime
307 and VolReadTime. This should fix or limit #1066
308 kes Correct error string numbers in dird/catreq.c
309 kes Restructure reserving, acquiring, and mounting volumes. Calls to
310 autochanger are deferred for mount.c -- simplifes the code.
312 kes Do not prune any running job. It just fails the job.
313 kes Lock the volumes when changing dev->reserved_device and marking
314 the volume unused otherwise the device can get reserved by
315 another job before the volume is released, thus blocking it.
317 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
318 kes Fix bug #1063, reuse of freed ptr in list nextvol.
319 kes Release regex compile buffer in filed/job.c
320 kes Add proper type of const char in sql_create.c
321 kes Turn off debug in daemon termination routines
322 kes Move free_volume_list() before devices are freed in stored.c
323 kes Fix reference to uninitalized stack variables in bregex.c.
324 This should correct bug #1067.
326 kes Fix possible seg fault in SD when freeing a volume entry.
328 kes Implement unload_dev() before swap device.
329 ebl Add statistics prunning with option and menu
330 kes Separate unload_dev() from unload_other_device() in autochanger.c
332 kes Apply patch from bug #1069 that corrects spurious error messages
333 when ACLs enabled on SGI but no ACL exists.
334 ebl Fix small segfault in bacula-sd when debug level is 500
335 kes Modify run_program() and run_program_full_output() to use
336 call by reference for the results string. This corrects a long
337 standing problem where the address of the string may be changed
338 in the subroutine but not in the calling program.
340 kes Re-enable code to remember last volume mounted on a non-tape
342 kes Add patch supplied in bug #1068 that fixes a SD crash when using
343 a Virtual autochanger.
344 kes Generate correct JobMedia records during spooling/despooling when
345 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
346 <tih@hamartun.priv.no> for excellent analysis and testing.
348 kes Tweak hash algorithm for htable using Martin Simmons idea
349 for doing a circular shift.
350 kes Remember what volume is in VTLs (previously turned off for
352 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
353 pointed out some problems in creating JobMedia records during
354 spooling with concurrent jobs. Fix the problem by updating the
355 start file position before despooling and generate a jobmedia
356 record at the end of despooling.
358 kes Fix handling of JobMedia records during spooling and when a
359 Volume is changed without actually writing data to the Volume.
361 kes Rework certain SD locking based on gdb tracebacks of deadlocks
362 sent by Eric. This code now uses only the volume_lock() rather
363 than the reservations lock when at EOM and acquiring a new
365 kes Ensure only one exit point in several subroutines.
367 kes Implement bsock code to permit locking. Use the new code in Verify
368 in the FD to prevent the heartbeat thread from disrupting the Verify
369 data sent to the Dir.
370 kes Modify SD locking to eliminate locking the reservations system from
371 outside the system. Use the volume lock when getting media data
372 and reserving a new volume at end of media.
373 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
374 when SD starts are not locked into place.
376 kes Fix error compiling runscript code on 64 bit machines.
377 kes Tweak Win32 mount point code.
378 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
379 cleared giving bad file estimate).
380 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
383 kes Keep Schedule run lists in order as suggested by
386 kes Implement autostart scripts for Debian.
387 ebl Implement upgrade catalog scripts.
389 ebl Apply jobstat patch for long term statistics. Have to implement
390 purge stats command and upgrade scripts.
391 kes Fix mtx-changer.in for broken Debian mt program.
393 kes Fix large number of JobMedia records reported by Eric Bollengier.
395 kes Apply doc fix from bug #1062.
396 kes Resolve crash and improper restore wx-console Win32 restore
397 GUI. Fixes bug #1065.
398 kes Update Win32 wxWidgets to latest version.
399 kes Attempt to do correct handling of Win32 mount points. Should
401 kes Fix Win32 FD backup/restore memory leak due to improper termination
402 of BackupRead/Write. This fixes bug# 1038.
404 ebl Reduce memory usage for accurate backup, working only with ctime
405 and mtime. (not all Lstat field)
406 About 40MB for my Linux system (400.000 files)
408 kes Add dcr->reserved_volume flag that allows us to release a volume
409 even if it is not vol->released. This allows maxvol2 to work when
410 Volumes expire and we are already writing to the device (i.e. a
411 volume is pulled out from under us by another job terminating after
412 we reserve the drive).
414 ebl Permit multiple command/console per runscript definition.
415 RunScript { command = /bin/true ; command = /bin/false ... }
416 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
417 (restart an application) just after the VSS snapshot on windows.
418 kes Don't zap dcr values during release_volume() as they might
419 have the next Volume to be mounted.
420 kes Fix AIX prototype.
422 kes Second cut of drive switching during backup.
425 kes Update Win32 version of wxWidgets to most recent version.
426 kes Tweak Copy job details.
427 kes Rework dir_find_next_appendable_volume to make a bit more effort
428 to find a suitable volume before giving up.
430 kes Make ask_sysop_to_create... to return if waken from wait.
431 This helps get out of blocked conditions.
432 kes Experimental implementation of switch_device in reservations.
433 kes Implement FD version to allow easier protocol changes.
434 kes Add Plugin Options string -- not yet passed to FD.
435 kes Implement PluginOptions ACL.
437 kes Attempt to correct problems with restores with autochangers and
438 use counts going negative
439 kes Rework SD status command and implement API for bat. Implements
440 header, runing waitreservation, devices, volumes, spooling,
441 and terminated status keywords.
442 .status storage=xxx <keyword>
443 kes Clarify TLS error message by adding double quotes around name.
444 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
445 kes Pass jcr to tls routines so debug messages can be handled better.
446 kes Rework jobq resource allocation code, and possibly fix a bug
447 that caused reference counts to get out of sync.
449 kes Rename fd/dir plugin to use Bacula standard underscore.
450 kes Plugin work -- bring dir up to fd level.
451 kes Start implementation of VTL code
452 kes Fix Win32 build after adding new cats subroutine.
454 kes First cut at Duplicate Job implementation.
456 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
457 kes Start PluginOptions string, and refactor a bit of ua_run.c
458 ebl Apply Allan patch that permit to reset recyclepool.
460 kes Test patch -- possible fix or improvement for bug #1053
461 kes Refactor FD and SD status commands to permit new API code in
462 SD, and to fix Win32 build.
463 kes Win32 build is now working.
465 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
466 some ideas in patch from Scott Bailey.
467 kes Begin implementation of duplicate Job control.
468 kes Fix some of Win32 build after recent additions.
469 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
470 which causes the FD to detect whether or not the OS has the
471 honor no dump bit (*BSD systems), and if so, to skip backing up
472 any file with this bit set. The feature is enabled by setting
473 'honor no dump flag = yes' in the Options section of a FileSet.
475 kes Correct po warning message with datarootdir
476 kes Implement more code in dird.c to put configuration parsing in
477 a class rather than use globals.
478 kes Restructure SD status command for implementation of bat API
481 kes Suppress incorrect 'Will not descend from x into y' messages.
482 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
483 daemon globals used by parser.
484 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
486 kes Fix free of plugin_list when none exists.
488 ebl Apply accurate project patch.
490 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
491 on non-mempool object)
492 kes First cut of converting FD .status to work with bat API.
494 .status client=XXX header
495 .status client=XXX running
496 .status client=XXX terminated
497 kes Implement first cut of Copy Job.
498 kes Implement Catalog in Pool resource. It overrides catalog specified
499 in the Client resource.
501 kes Apply patch (with some difficulties) from Joao Henrique Freitas
502 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
504 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
505 ftruncate() actually works. In the case of some (cheap) NAS devices,
506 it does not, and so recycling NAS Volumes does not work. The code
507 simply unlink()s the file, then recreates it. This fixes bug #1011.
509 kes First incomplete cut of big malloc blocks for htable.
510 kes Tweak plugin code.
512 kes Plugin debug code + tweak a couple bat dialog layouts
514 kes Fix creating first JobMedia record during Migration to include
515 proper index. This caused slow restores of migrated jobs.
516 kes Temp fix to plugin name file_index.
517 kes Bacula backed up and restored a MySQL database.
519 kes Implement plugin restore.
520 kes Implement parsing of db_driver to give db_type index.
522 kes First cut of plugin restore code.
523 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
524 and do not strip paths on symbolic links.
525 kes Set catalog backup database and user name from values specified on
526 the ./configure line.
527 ebl Fix #1031 about wrong pool source information in job report.
530 kes Remove a redundant jcr argument to find_files, match_files, and
532 kes Implement '.status dir header|scheduled|running|terminated' that
533 prints the requested status section. With the exception of the
534 header, the other reports have fields separated by tabs (\t).
536 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
537 a resource embedded run command to find a since time if no explicit
538 since time was supplied on the command line.
539 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
540 that updates the state file at job termination time in addition to
541 when the daemon terminates.
543 kes First version where a plugin did a backup.
544 bpipe-fd.so created a backup file, wrote a test
545 string to it, and Bacua could restore this fabricated file.
547 kes Implement DB Driver = string for the DBI driver.
548 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
549 kes First cut of code for loading Win32 plugin dlls. Implement
550 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
551 and implement a dlfcn.h file based on opengroup's definitions of
554 kes First cut plugin directives.
556 kes Apply patch from bug #1049 to prevent stripping the path on a
558 kes Attempt to fix bug #1047 where stripping a path corrupts the
559 heap. Waiting for feedback.
560 kes Correct the Mount message not to suggest labeling a new tape
561 when doing a restore. Submitted by email by John Stoffel.
562 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
563 FD by using casting. Reported in bug #1042.
565 kes A bit of crypto cleanup. More later.
567 Release Version 2.2.8
569 kes Apply patch from Martin to correct bug #1040, bscan sets existing
571 kes Fixed important spelling error in doc -- bug #1045.
573 ebl Fix bextract to be able to extract non-portable Win32 data to
575 kes Move initialization of read/write res lock earlier in the code.
576 This fixes the crash with a null conf file. This fixes bug
578 kes Redefine CURES in lib/parse_conf to be URES and move it all
579 into lib/parse_conf.c -- this responds to bug #1042, but does
580 not fix it. The fix is not to compile with FORTIFY_SOURCE.
581 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
582 the trunk SVN. I don't think this was reported as a bug.
584 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
586 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
588 kes Add DataDespooling and DataCommitting status (committing is
589 the last despooling).
590 kes Finish implementation of new reservations code noted below.
592 kes Fix bsnprintf for float point numbers. I broke recently when
593 parameterizing some variables. This fixes bug #1036.
594 kes Undo recent reservations changes ... will apply them later
595 when they work better.
597 ebl Fixes #1034 which cause mysql to hang the connection after 8h
598 ebl Change default statistics target of filename.name and path.path
599 fields for PostgreSQL. This speeds lookup by indexes. Thanks
601 kes A few more tweaks to new reservation code. Make sure to clear
602 vol released flag when retaking volume. When reading label and
603 label is bad mark volume unused. When recycling, mark volume
604 unused so it can be renamed.
606 kes Fix reserve_volume() so it doesn't release a volume in use
607 (i.e. a volume entry not marked released). This should be
608 the last part needed to fix bug #1018.
610 kes Move Heartbeat documentation from Job to Director resource.
611 This fixes bug #1033.
613 kes Fix existing switch drive SD code to call autochanger to release
614 any old volume. This must be done to keep the autochanger from
615 releasing subsequently newly reserved volumes in doing a close().
616 This should fix bug #1018.
617 kes Fail if attempting to get console input in batch mode. This
618 should help fail RunScript console commands that are incomplete.
619 kes First cut implementing switch_drive() in SD (not actually called).
621 kes Implement first cut running console commands in a RunScript.
623 ebl Fixes bug #1028 where 'Selection Type' option was not usable
625 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
628 Release Version 2.2.7
630 kes Add new free_tls() entry point so that Win32 builds.
631 kes Fix compile warning in src/lib/util.c
632 kes Fix entry point for edit_job_codes() so that Win32 builds.
633 kes Fix seg fault Frank Sweetser reports in regression testing
634 on his systems. The problem was that the original author of
635 bsnprintf.c did not take into account the side effects of
636 using ++x in the argument to a #define.
637 kes Make SD protocol backward compatible with version 2.2.x.
639 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
640 because Bacula no longer restores sockets.
641 ebl Always use ignorecase fileset option on win32 FD.
643 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
644 that implements double quoting include names in conf files,
645 and also allows piping input by having the first character
646 be a vertical bar (|).
647 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
648 that implement %f in RunScripts to pass the FileSet name.
649 kes Skip leading | when lex input comes from a pipe as suggested
650 by Michael Stapelberg <michael@stapelberg.de>.
652 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
653 Nerijus Baliunas <nerijus@users.sourceforge.net>
655 kes Implement Plugin Directory and plugin events.
657 kes Implement a security enhancement: TLS authentication but no
658 encryption. Enabled by setting 'TLS Authentication = yes'.
659 Note when this is on, TLS encryption is turned OFF!
661 kes This patch corrects a problem where the maximum concurrent storage
662 jobs counter gets out of sync during restore jobs causing jobs to
663 'wait on max Storage jobs'. This patch fixes bug #1009.
665 kes This patch fixes bcopy so that it produces correct Volumes.
667 kes This patch eliminates spurious output to the console during a VerifyVolume
668 job that contains encrypted data. It fixes bug #1024.
670 kes This patch prevents the 'status dir' command from trying to use a scratch
671 volume and possibly moving it from one pool to another. This patch fixes
674 kes Add new include to postgresql.c suggested by Marc Cousins so
675 that it compiles correctly with pgre version 8.3.
677 kes Fix --archivedir addition to configure. Replace it with
678 --with-archivedir in configure.in This fixes the regression
680 kes This patch fixes bug #1012 where the job is canceled because
681 of Max Run Time exceeded when the job has not yet started.
683 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
684 one 'part' to write. Instead of each part being stored on disk,
685 written to DVD, then deleted from disk, all parts are written to disk,
686 and only the last is written and deleted from disk.
687 kes This patch fixes the status command to include the formating string for
688 JS_AttrInsterting. It fixes bug #1021.
689 kes This patch should fix the Mac OS X build problem on the latest
690 Darwin, where sys/types.h was not included correctly (apparently
691 due to a change in the Mac headers). The solution was to explicitly
692 ensure that it is defined for the ./configure.
693 This patch also has a rebuild of configure that includes the Debian
694 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
695 kes This patch should ensure that queued messages to the console are
696 displayed as soon as possible. It should fix bug 1007, but has been
697 reported not to work.
699 kes This patch fixes the infinite loop when trying to increase the
700 maximum number of volumes in a Pool during the add command.
701 This patch fixes bug #1008.
703 Release Version 2.2.6
705 db Remove extra data on estimate command in joblist for bat.
707 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
708 really change anything, but is the beginning of doing it *right*.
709 To do it completely right the LastWritten date must be passed to
710 the SD, but it is not yet done.
711 kes Minor tweaks to some bat restore SQL.
712 kes This patch fixes bug #1003 where putting the message output from
713 a Verify job into the catalog results in a recursive loop. The problem
714 seems to show up only with postgresql (to be verified).
715 kes Correct %x to %p in postgresql debug statement.
717 kes Fix bug #942 where lots of emails where generated when the heartbeat
718 interval was low and Bacula wanted a different tape from the one in
721 ebl Add new SD despooling attributes and Dir inserting attributes
722 job status codes in the catalog (Status table).
724 ebl Use qmake-qt4 instead of qmake when available (debian system).
726 kes Add a security warning to src/cats/make_catalog_backup.in indicating
727 that passing the password via the command line (arg 3) is insecure.
728 This responds to bug #990 (it doesn't fix it).
730 kes Set default debug_level to zero. This corrects bugs #991 and #993.
731 kes Fix a crash in bat when it cannot connect to the Director for example
732 if the Director is not running.
733 kes Remove redundant INDEX (JobId) from File table in the trunk.
735 kes Make explicit exception to GPL in LICENSE to permit linking
736 the Win32 FD with Microsoft VSS code.
737 kes Apply the Solaris package patch from
738 Masopust, Christian <christian.masopust@siemens.com>
739 kes Apply the patch to optionally add a timestamp in the debug output
740 submitted by Mariusz Czulada <manieq@wp.eu>.
742 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
743 backend (sql_strerror). Fixes bug #989
745 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
746 It applied with no problems.
747 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
749 kes Redirect stderror to stdin on mt status command in mtx-changer.in
750 since the status is returned on stderr on Solaris.
751 kes Activate Close button on tray-monitor window. This fixes
753 kes Check for NULL item in parse_conf.c before calling it. In the
754 case of Device, there is no item and this caused a seg fault when
755 Device appears in the conf file.
756 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
757 avoids pulling in config.h multiple times in some new code.
759 kes Fix spurious warning message printed when creating a volume with
760 a LabelFormat. This fixes bug #976.
762 Release Version 2.2.5
764 kes Add JobId in place of Job name in all the Jmsg() output.
765 kes Correct the APP_DESC for the Win32 storage service (remove an e).
767 kes Make maxvol-test and new more strict maxvol2-test work.
768 kes Print JobId in all Jmsg() job output.
770 kes Add new SD despooling attributes and Dir inserting attributes
771 job status codes. This fixes bug 961.
772 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
774 kes Fix doc issue. This fixes bug #963.
775 kes Fix listing performance problems in bat. Pointed out by
777 kes Remove old debug code.
778 kes Fix bat code that tests for Win32. This should fix bug #968
779 kes Query 5 list wrong Vol after migration. This fixes bug #960
781 ebl Fix #969 where user can't change Replace option in restore menu.
783 kes Save jcr in thread specific data (tsd) for each thread.
784 kes Make Dmsg() print JobId as -%u.
785 kes Make Jmsg, Emsg, and others automatically pickup the jobid
786 for the thread if it exists.
787 kes Remove old reservation debug jid code.
788 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
789 ebl Add an option that permit to specify spool size in job
790 definition. (Applying patches/testing/spoolsize_per_job.patch).
791 You must upgrade SD and DIR at the same time.
792 dvl Add new configuration item --archivedir
793 dvl Adjust regression tests to use tmp not /tmp. This will allow
794 multiple concurrent runs of the regression tests.
796 kes Fix race condition that drops final block written to volume.
797 This happens in rare cases with multiple simultaneous jobs
798 when the Volume fills. This fixes bug #964. May be related
799 to bug #935 and possibly #903.
800 kes Eliminate more strerror() and replace with bstrerror().
801 kes Remove BSD getopt and replace with unrestricted IBM version.
802 kes Fix Win32 build for changed calling sequences.
803 kes More tweaks to the mount volume routines to get everything
804 right. Changed variable name from find to have_vol, which is
805 much easier to understand.
806 kes Enhance btimer debug code.
808 kes Fix FD->SD authorization failure, which was due to spurious
809 wakeups from a pthread_cond_timedwait(). Simply check the
810 predicate before continuing. This fixes bug #953.
811 kes Add const char where needed (more to do). Remove temp debug code.
813 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
814 kes Don't overwrite error message in check_tables_version.
816 kes Unlock batch insert tables with same calls used elsewhere.
817 kes Allow starting 59 jobs a second.
818 kes Make SD session key more random.
819 kes Add retry for SQLite opening db if it fails. Probably helps
821 kes Suppress extra error messages during batch insert failure.
823 kes Add jcr to timer packets so if killed message can be sent to job.
824 kes Add JobId to all Dmsg() output.
825 kes Put some FD auth code on dbglvl rather than fixed.
826 kes Return insert attributes error message in db msg buffer to avoid
827 false error messages. Helps fix bug #966.
828 kes Separate batch init error messages. Probably helps fix bug #966.
829 kes Make SD code that contructs attribute insert check string lengths
831 kes If Dir gets an error during inserting attributes, cancel SD.
832 This reduces unnecessary error messages.
834 kes Correct search boolean for getting Volume info
835 ebl Cleanup batch insert code. Probably fixes bug #965.
836 kes Back out one small change to the reservation system (reserving a volume).
837 kes Rework how a Volume is mounted. It is now much more intelligent and
838 will always attempt to use any mounted volume if possible and reduces
839 calls to the Director asking about volumes.
841 kes Turn off some code when batch insert not enabled.
842 kes Edit FD name in connect error messages.
843 kes Rework the reservation system to take into account that the Director
844 might give us a Volume that is different from the current one being
845 used, and to ensure that we don't exceed Maximum Volume Jobs.
846 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
847 fatal error with multiple jobs running'
848 kes Add more debug code in reservation system.
849 kes Implement maxvol-test to check bug #947.
851 kes Add code to handle tray monitor separated from Win32 FD.
852 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
854 kes Add missed return in fixing verify bug -- trunk only.
855 ebl Fix a command parser issue causing a director segfault.
856 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
858 kes Increase the max block size to 4MB fixes bug #957.
859 kes ERABT if user sets min block size > max block size. Fixes bug #956.
860 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
861 is not properly mounted (recognized) during a poll.
862 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
863 Job that has differences reports Verify OK.
864 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
866 ebl Add an option to operate on all pools with update vol parameters.
867 This complete the project 20. Patch from Nigel Stepp.
868 ebl Add history support to bconsole when using readline.
869 Using Ctrl-D to exit doesn't update .bconsole_history
870 kes Modify new volume algorithm to use max MediaId for generating next
871 volume number rather than the count of Volumes. This should essentially
872 eliminate the failure rate if some volumes were deleted. Bug #921.
873 kes Begin implemention of Optimize Job Scheduling.
874 kes Implement restore callback that Dirk and I agreed on for bat
875 restore. This fixes bug #928. Restore of backup of zero files fails.
876 kes Fix SQL Catalog logging which broke with new db_escape_string
879 Release Version 2.2.4
881 kes Fix bacula_cats.def for new db_escape_string().
882 kes Increase size of name string when FD making connection to SD.
883 May fix bug #953. FD->SD connection failure.
885 kes Add code to help Dan debug 2drive-incremental-2disk test.
886 kes Add code to try to fix bug #908.
887 kes Add waits to multiple exit detection code to try to force pid
888 file to always be deleted.
889 kes Restore good dev.tar.gz to rescue set appropriate binary property.
891 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
892 trying to switch drives by checking for blocking before unblocking.
894 kes Cancel storage daemon in all cases where FD reports error. This
895 should fix virtually all cases of bug #920.
896 kes Fix db_escape_string() for MySQL which did not compile.
898 kes Fix error message that was clobbered when Dir tells SD it does not
899 have write permission on Volume. This should fix a minor point
900 in bug #942, but not the main problem.
901 kes Add code to cancel job in SD if FD connection fails. This should
903 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
904 dvl Pass jcr and db into db_escape_string() to enable better escaping
906 kes Fix migration code to get correct Volume name with multiple volumes
907 by skipping |. Fixes bug #936.
908 kes Implement patch supplied by Landon to fix bug #944 where using
909 TLS with bconsole uses 99+% of the CPU.
910 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
912 kes Move patches into patches directory.
914 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
917 ebl Using 'm' in bconsole will show messages like before,
918 and not memory usage.
919 kes Fix bug #935, and probably also bug #903 where files were not
920 restored. MediaId was not properly set in JobMedia record after
923 kes Suppress chown and chmod error messages if the FD is not running
926 kes Apply Martin Simmons' patch that should turn off the new API usage
927 when batch insert is turned off allowing building on older
929 kes Add ./configure search in qwt-qt4 for qwt package
931 kes Bacula is now free of 3rd party GPL copyrighted code!
933 kes Add guid_to_name.c/h which replace idcache.
934 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
936 ebl Detect if new PosgreSQL batch insert API is present.
937 kes Correct incorrect mempool call causing Director crash. Occurs on
938 systems without va_copy().
939 sb Update spec files for 2.2.1 release
941 kes Fix memory pool call in ua_output.c. bug #934.
942 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
943 Add test program to fnmatch.c
945 kes Integrate patch to README.vc8 from
946 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
947 edit it to get it into Unix patch format.
948 kes Implement mkpath.c to replace old FSF makepath.c
950 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
952 Release Version 2.2.1
954 kes Update POTFILES.in
955 kes Cleanup a few underquoted AC_DEFUNs in configure
956 kes Apply patch from Martin Simmons that adds a test for va_copy to
959 kes Fix bug #921 by increasing the number of tries to create a new volume
961 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
962 can be called multiple times. Implement a version for machines
963 without va_copy() that gets a big buffer.
965 kes Integrate more portable zone offset code into bsmtp.c
966 Submitted by Attila Fülöp.
968 kes Fix bad SD->FD return status reported by
969 (James Harper) <james.harper@bendigoit.com.au>
970 ebl Fix a bug in read_close_session which return random status
971 thanks to James Harper
973 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
974 and directory names during restore of single file/directories.
975 kes Add sanity checks to .sql command when string is empty. Hopefully
976 that will resolve Dirks Director crash.
978 kes Apply patch submitted by Martin Simmons that corrects a seg fault
979 in the bsmtp chat subroutine when debug is >= 10.
981 kes Fix Director crash when running bat SQL queries.
982 kes Add David's notes on Item 8: Copy pools.
984 kes Rework projects file to be current and ready for a vote.
985 kes Enhance lex scanner error message.
987 kes Tweak LICENSE file to mention BSD code.
988 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
989 if specified on the ./configure.
990 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
991 This class is intended to allow us to open a second bsock to the
992 Director while in the restore subdialog.
994 kes Fix configure to create bat Makefile before creating dependencies.
995 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
996 kes Add a tooltip to the tray monitor.
997 dvl Set the Director's PID file before dropping privs. This fixes
1000 kes Update AUTHORs file
1001 kes Increase the default max concurrent jobs to 20 in FD and SD to
1002 correspond with the default .conf files.
1003 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1004 some different, of the same file created by RN when porting the
1006 kes Rearrange some of the Win32 directories and the placement of the files
1008 kes Set DEVELOPER flag in version.h
1010 ========================================================================
1011 Release Version 2.2.0
1013 kes Apply a second doc patch from Marc.
1014 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1015 improves the tips section that discusses how to setup multiple
1018 kes Update bat README file.
1019 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1020 corrects a typo in the Recycle status check in db_find_next_volume().
1021 This will probably fix a number of annoying problems with multiple
1023 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1024 bnet calls -- no functionality change.
1026 kes Modify the Verify output to specify if files are missing on
1027 the Volume(s) or disk. Fixes confusion in bug #916.
1028 kes When more than one Volume is read in a migration job, the last
1029 Volume bytes reported are from the last read volume rather than
1030 the last written volume. Fixed. This fixes bug #910.
1031 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1032 It previously printed New Recyle flag is: no. This fixes bug
1035 kes Correct seg fault when switching tape drives during restore.
1036 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1037 be used until after 2.2.0 release.
1039 kes Remove fnmatch() in SD that permitted wild card specifications.
1040 This fixes bug #914.
1042 kes Fix %g in filename returned by SQL for browse tree reported by
1044 kes Fix configure so that it puts config.out in the cwd rather than
1046 kes Attempt to fix the locking problem reported by Eric in bug #906.
1047 kes Make berrno class to leave errno unchanged after constructor call.
1048 kes Make bnet_server use the heap rather than the stack to allocate
1049 its socket fd pointers to avoid a crash at termination. Problem
1050 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1052 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1053 and putting it in depkgs-qt along with Qt4.3.
1055 kes Rework code in acquire.c that switches drives for reading when
1056 the Media Type does not match. This should fix bug #906
1058 ebl Fix a director segfault during job setup #907
1059 kes Correct seg fault in postgresql when first operation returns no
1060 rows. Fixes Dirks File browser problem seg fault with bat.
1062 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1063 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1066 kes Implement PopUp YES/NO dialog for bat.
1068 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1070 kes Correct RunScript to terminate job in FD on failure.
1071 kes Change abort_on_error and AbortJobOnError to fail_on_error
1072 and FailJobOnError in RunScripts.
1073 kes Minor tweaks of code formating in RunScripts, principally to
1074 avoid depassing 80 columns.
1076 kes Eliminate one #ifdef Win32 in bsmtp
1077 kes Implement grow tool to grow a file for testing very large databases.
1078 kes Add big-vol-test to test Bacula seeking with > 5GB.
1081 kes Modify find_next_volume() to return all values in Media record.
1082 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1086 kes Update Release notes
1088 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1089 Warning, in previous beta version, all media get from scratch keep their
1092 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1093 This should fix bug #842. Made a note to look at removing the temp
1094 files at the end of the install.
1095 kes Add ability to mount and unmount a file device providing it is
1096 marked as being removable and has the appropriate mount and unmount
1097 commands defined in the Device resource. This fixes bug #830.
1098 kes When applying a storage override, release all previous storage
1099 definitions rather than just prepending the new storage.
1100 This should prevent a good deal of confusion.
1102 kes Implement ./configure search for qwt libraries.
1104 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1105 Win32 FD. This should fix bug #893.
1106 kes Remove an unnecessary beep in Win32 init code.
1107 kes Update copyright dates in Win32 executable about boxes.
1108 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1109 code with a BSD getopt.c and getopt.h.
1110 kes Remove sched.h from the Win32 compat directory -- not used.
1111 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1112 need to shut it down, do it through the services panel or the command
1114 kes Remove some inappropriate Bacula FSFE copyrights.
1115 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1116 kes Fix regress config non-portable test as pointed out by
1117 Florian Heigl <florian.heigl@gmail.com>
1118 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1119 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1121 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1122 Reported by Frank Sweetser.
1126 kes Fix client-only build.
1127 kes Integrate client-only fixes for bsys (initgroups) and conio from
1128 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1129 kes Make arguments to get_scratch_volume() in same order as other
1131 kes Rework the prune_volumes() subroutine so that after purging and
1132 no volume found in desired pool, it will check for a scratch
1133 volume. This prevents recycling the whole scratch pool.
1134 kes Add code to status storage to print boffset_t (largefile support).
1136 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1137 kes You now need a --with-qwt=<dir> to be able to build bat.
1138 kes Update src/win32/cats/bacula_cats.def to include the new
1139 db_get_query_dbids() call on Win32.
1141 kes Correct a problem when selecting a scratch volume and moving
1142 it to another pool that lost some columns.
1143 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1144 kes Enhance Autochanger error messages to include Volume and device name.
1145 kes Rework prune_volumes() code to take account of InChanger flag,
1146 and to handle recycling volumes going to the Scratch pool and
1147 current pool because the RecyclePool directive.
1148 kes Implement a better and more efficient db_get_query_dbids() to
1149 handle creating and passing back a list of DBIds.
1153 kes Start work on new more efficient DBId subroutine. First use
1154 will be for recycling volume to Scratch inchanger.
1155 kes Increase number of JobIds in pruning from 1000 to 10000.
1156 This to be replaced by above routine.
1157 kes Begin implementation of building Qt4 on Win32.
1158 kes Correct typo in fix I added for bad TLS shutdown.
1159 kes Pull 2.0.3 patches into patches directory.
1160 kes Update Release notes. Include qt-console in line count.
1161 kes Update Projects file.
1163 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1164 bug in migration code where a job that spanned two volumes
1167 kes Implement new BST_DESPOOLING blocked state. Change from locking
1168 during despooling in SD to blocking. This means that other threads
1169 can work with the device structure, in particular the reservations
1170 system while despooling.
1172 kes Fix return in reservation message queue that missed clearing
1173 the jcr lock (implemented 26Jun07 below).
1174 kes Rename a number of dev methods to make locking function names
1176 kes Document locking in lock.c. Move lock structures to new file
1179 kes Move reservations message lock to lock jcr only this
1181 kes Move main SD locking code into lock.c (new file).
1182 kes Update Win32 build to include lock.c
1186 kes Dirk committed the qwt library code for drawing graphs in bat.
1187 kes Tweak install of qwt so that it is integrated with ./configure.
1189 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1190 out by Eric (my typo).
1191 ebl Fix configure.in to get batch mode enable
1192 kes Return correct string from authenticate.cpp in bat when connecting
1194 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1195 spurious line drops when using TLS.
1196 kes Do not file reparse points when restoring a file that already
1199 kes Implement Windows reparse points -- similar to directories, but
1200 we do not descend into it. This is a first cut. They seem to
1201 be backed up, but restore is not yet tested.
1202 kes Remove restore_blocking in tls code when shutting a socket to leave
1203 it in blocking mode. Hopefully this will fix the encryption bug
1204 reported by Frank Sweetser.
1205 kes When opening a file for backup, tell the OS that we are going to
1206 read it sequentially -- optimization.
1207 kes Change variable names in authenticate_director() to not conflict
1208 with member names in bat. Caused great confusion with compiler,
1211 kes Queue openssl error messages in case of comm problem.
1212 kes Do shutdown() call if socket terminated.
1213 kes Remove some duplicated code in tls.c
1214 kes Move more of the bsock member variables into private and access
1216 kes Add Frank Sweetser's tls-test to the regression suite.
1218 kes Add Swedish sv.po file
1220 kes Don't print clock skew message in FD if less than 3 seconds diff.
1221 kes Add a bit of VSS info to status client.
1222 kes Implement a first cut of Vista VSS, using Win2003 code.
1224 Release: 2.1.20 beta
1226 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1227 loaded tape but uses first drive).
1228 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1229 This was indeed a Win32 issue.
1231 kes Simplify search of autochanger for in-use Volume.
1232 kes Fix exit condition of check for in-use volume. kes Remove
1233 inappropriate my_postgresql_free_result() in db_close()
1235 kes Fix bad return in FD when encryption signature not found.
1236 Probably caused a crash.
1237 kes Inhibit missing encryption signature error messages for
1238 file types where no signature computed.
1239 kes Correct inverted check on autochanger in reservation system.
1240 kes Tweak debug code in autochanger reservation.
1242 kes Add some additional locking in the cats directory in subroutines
1243 that modify packet variables called from batch insert.
1244 kes Rework how dcrs are allocated. new_dcr() can now be called
1245 with an existing pointer, and it will simply clean it up.
1246 This allows the reservation system to test various different
1247 devices, and will permit easy device changes.
1248 kes A bunch of changes all over to handle new new_dcr() calling
1250 kes Work more on the Volume management in the SD. Remember Volumes
1251 for tape drives and for autochangers (even virtual disk changers).
1252 kes When looking at the Volume list to reserve a drive, handle
1253 autochanger names correctly by interating through the changer
1254 devices. Also call the Director to see if a Volume is suitable
1255 for the current job.
1256 kes Fix some bugs in bscan. Make sure all media records are written.
1257 Make sure that valid JobMedia records are written for disk files.
1258 Previously they were completely wrong.
1259 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1260 that the URLs don't change and so that the developers will all
1261 work off the same copy. Rebuild from scrach.
1262 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1264 Release: 2.1.18 beta
1266 kes Fix seg fault in FD from incorrect digest size.
1267 kes Fix argument to non-OpenSSL crypto.c subroutine.
1269 Release: 2.1.16 beta
1271 kes Remove a few malloc()s from the encryption code.
1272 kes Use the class calls to bsock in filed/backup.c and restore.c in
1273 place of the old bnet_xxx code.
1274 kes Implement code that does an on the fly calculation of the
1275 signing digest during restore of encrypted files. It makes
1276 a best guess at the algorithm, and if it is not correct, will
1277 then revert to the old code which reads the file after it is
1279 kes Implement at least one missing crypto stream in stream_to_ascii()
1280 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1281 #877 where a reload with bad syntax causes Dir to exit.
1283 Cut: 2.1.14 beta (not released)
1285 kes Do not free a volume on a tape drive until another volume is
1286 mounted and read, or the autochanger unloads the volume.
1287 This should help the SD re-use volumes that are already mounted,
1288 and should fix bug #886.
1289 kes Apply patch from user brettedgar that allows gnome2-console include
1290 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1291 kes Apply patch from Lucien Weller that fixes day of week calculation
1292 because of DST flag problem. Fixes bug #887.
1294 kes Move find_next_appendable_volume() to after acquiring a valid device
1295 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1297 kes Unable to reproduce bug 872. However added additional testing for
1299 kes Bug #874 resolved by documenting SQLite limitations.
1300 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1301 kes Bug #881 resolved by removing typo in mtx-changer script.
1302 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1303 approval. Added a link to the wiki on the web page, and implemented
1304 a backup from http://paramount.ind.wpi.edu
1306 kes Fix update allfrompool to pass pool name.
1308 kes Convert to pure GPL v2 license.
1309 kes Fix sscanf problems reported by Peter Buschman that caused
1310 a bus error on Solaris.
1311 kes Rework (simplify) the select prompt in bat.
1312 kes Move get_jobid_from_tid() into lib and create a
1314 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1315 should definitely fix the problem of lost error messages in the
1317 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1318 kes Eliminate tcpd.h from the project. Enclose the #include from the
1319 library with extern C ...
1320 kes Add print of signal name when a signal is trapped.
1322 Release: 2.1.12 beta
1324 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1326 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1327 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1328 makes SQLit3 run 30 times faster, though a bit less safe.
1329 kes Implement --with-batch-insert in configure and detection of thread
1330 safe libraries. It is on by default, but turned off if no thread
1331 safe library (e.g. SQLite 2) is available.
1333 kes Fix Bacula PostgreSQL buffer overruns.
1334 kes Do better checking for NULL results returned from PostgreSQL;
1335 implement retry for failed queries; clear results buffer after
1336 failed query. Hopefully this will correct the PostgreSQL failures.
1338 kes Implement algorithm to handle only one appendable volume with
1339 Prefer Mounted Volumes = no.
1340 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1341 returned from a query.
1342 kes Make volume lock recursive.
1343 kes Implement an additional volume reservation algorithm that
1344 starts by considering all reserved volumes then uses the
1345 old brute force algorithm of searching the resources to
1346 find a suitable device.
1347 kes Add new reservations debug code and refine the old code.
1348 kes Update the win32/dll/bacula.defs file.
1350 kes Tweak reservations algorithm to permit a few more cases, i.e.
1351 volume reserved, but on different drive, ...
1352 kes Enhance SD status to include Pool and Media Type for drive in a
1353 more readable format (a bit longer).
1354 kes Fix PostgreSQL double free.
1356 kes Minor refactoring of restore decryption code.
1357 kes Add code to smartall.c to detect double free of a buffer.
1359 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1360 so that bsmtp will create a correct email address (mailbox only).
1361 kes Modify 'memory' command so that the buffers are listed as 'In use'
1362 to avoid confusion with Orphaned buffers.
1363 kes I reworked the OpenSSL include/lib flags to be handled in
1364 the standard Bacula way, which should fix bug #863 concerning
1365 non-standard OpenSSL libraries.
1367 kes Implement Help Browser window for bat.
1368 kes Fix reload bug that reset StorageId to zero.
1370 kes Fix TLS #ifdefing when TLS turned off.
1371 kes Ensure that when labelling a tape with Slot=0 that InChanger
1373 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1375 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1376 add DISTINCT (required by PostgreSQL).
1377 kes Implement BSOCK authenticate_director() method. Eventually will
1378 authenicate all daemons.
1379 kes Move several more functions into the BSOCK class.
1381 kes Add code to tell the OS that we no longer need a cached
1382 file that we were reading. In findlib/bfile.c. Also,
1383 only cache files that we are reading. Thanks to
1384 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1385 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1386 kes Implement script to automatically generate cats and dll .def
1387 files for Win32 dll.
1388 kes Update README.mingw32 to include new .def file generation.
1389 kes Correct typo in UTF-8 error message as reported by:
1390 jhernandez <julianhernandez@gmail.com>
1391 kes Add additional sm_check() code on debug level 1.
1392 kes Set default debug level to 1.
1393 kes Trap SIGABRT in attempt to get traceback.
1395 kes Reduce bat connect timeout from 30 to 15 seconds.
1396 kes More restructuring and implementing BSOCK class in place of
1398 kes Remove a few unnecessary malloc() tests in crypto code.
1399 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1400 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1401 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1403 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1405 kes Fix Verify InitCatalog. The attributes were not pointing to the
1406 correct saved location.
1407 kes Implement message callback so that GUI is sure to get all
1408 daemon messages. Currently displayed in a dialog in bat.
1409 kes Ignore SIGUSR2 (Bacula timer) in bat.
1410 kes Apply regress patch from bug #859 to allow regress to work
1411 with Solaris compiler.
1413 kes Begin adding TLS support to bat.
1414 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1415 clean up lex.c and make it more readable.
1417 kes Move more bnet functions into the BSOCK class.
1418 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1419 kes Complete change of berrno strerror() method to bstrerror()
1421 Release: 2.1.10 beta
1423 kes Cleanup incorrect email addresses in bsmtp.
1424 kes Make bat display initial messages rather than discard them.
1426 kes First cut of adding .mod to the run command.
1427 kes Implement auto display of messages in bat.
1428 kes Enhanced preferences to allow all Bacula output to be
1431 kes Try to make bsmtp date routines more generic.
1432 kes Fixed bug #856 autochanger documentation.
1433 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1434 kes Add new cats entry point so Win32 builds.
1436 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1438 kes Do better checking for the MySQL 64 bit libraries looking for both
1439 .a and .so libraries.
1440 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1441 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1442 kes Require the thread safe version of MySQL during configure. Thanks
1443 to Andre Noll for pointing this out.
1444 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1445 continuing in migration code.
1446 kes Apply implementation of tray-monitor font derived from gnome-console
1447 submitted by Andreas Piesk <a.piesk@gmx.net>
1449 kes Eliminate important memory loss in SQLite
1450 kes Fixed the batch insert MySQL thread specific data that was not
1451 being freed. See cats/mysql.c:db_thread_cleanup().
1452 kes Fix restore before command.
1453 kes Convert old hdr.name to name() in a few places.
1454 kes Implement update jobid command.
1455 kes Return all time_t dates in db_get_job_record()
1456 kes Stop watchdog in SD earlier.
1457 kes Put Pool just after Storage in please mount message.
1458 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1461 kes Update the po files.
1462 kes Fix Verify InitCatalog by making it cache attributes.
1464 kes Change name bacula-bat to bat for man 1 page to correspond to
1466 kes Check for client and store NULL pointers in status command. This
1468 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1469 kes Fix sign extended editing of %p.
1470 kes Clean out a little old #ifdefing in cats/mysql.c
1472 kes If time diff between DIR and FD is more than 600 seconds convert
1473 INFO message to WARNING.
1474 kes Implement heap size display in status for all daemons.
1475 kes Attempt to fix MySQL db open memory loss (not successfull).
1476 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1477 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1478 Query. This looks like a MySQL but but by doing extra releases,
1479 the memory goes away. This should fix bug #847.
1481 kes When backup fails, cancel SD before waiting for sd termination.
1482 kes If SD is waiting for FD to connect during cancel, wake up the
1484 kes Fix fsf code so that errno is correctly reported.
1485 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1487 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1488 so that Bacula doesn't later stumble into a seg fault.
1489 kes Use the term Restore Client in the restore Job report.
1490 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1491 the original job's FileSetId.
1492 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1493 spooling in migration jobs. Not yet tested.
1494 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1495 reading conf file from a pipe. However, do it with open_bpipe()
1496 rather than popen. Not yet tested.
1498 kes Fix an ugly bug where the VolCatBytes were getting updated
1500 kes Implement bconsole memory command that prints current memory
1501 usage, plus smartalloc dump.
1502 kes Clarify some error messages in backup, admin, and migrate.
1503 kes Shrink label dialog to smaller size.
1504 kes Invert Cancel OK buttons on restore to be OK Cancel.
1505 kes More strerror() to bstrerror() conversions.
1507 kes Start implementing bstrerror() in place of strerror().
1508 kes Stripping path -- seems to work.
1510 kes Prevent door and port files from being restored (mostly
1512 kes Free an unreleased buffer in compat code.
1513 kes Change console Job name from *Console* to -Console- to eliminate
1514 Win32 filename problems. Put Win32 path separator when creating
1515 Console file. This fixes bug #846.
1516 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1518 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1520 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1521 to force Win32 error message.
1523 kes First cut strip path. The data should be passed to the FD,
1524 but nothing is done with it yet.
1525 kes Enhance the digest and signature routines in the crypto
1526 library to accept a JCR and to use it to print error messages
1527 so that they will go in the Job report rather than the daemon's
1529 kes Simplify some of the verify signature code.
1530 kes Simplify a few of the alternative returns in the signature
1533 ebl Use only POSIX regex instead of GNU regex in breg.c for
1534 File relocation. It fix broken freebsd compilation.
1535 kes Convert all other Dir files to use new ua class message
1537 kes Tentative fix for missing digest signature in bug 807.
1538 kes Correct handle problem in new win32_ftruncate routine.
1539 kes Convert ua_purge.c and ua_update.c to use new ua class
1540 message routines for bat.
1542 kes Correct incorrect installation of LICENSE in Win32 installer.
1543 kes Display LICENSE at the beginning of the Win32 install.
1544 kes Attempt to correct the need for the png files to be installed
1546 kes Reapply my bat.conf install script in qt-console. I think I
1547 editted bat.pro instead of bat.pro.in and it was lost.
1548 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1549 the /var/lock/subsys for subsysdir. Also corrects typos in the
1552 kes First cut update job.
1553 kes Correct configure to include qmake of src/qt-console directory.
1555 kes Make restore job yes/mod/no print in one command so GUI works.
1556 kes First cut implementing backup and restore client.
1557 kes Correct editing in Verify output that caused a seg fault.
1559 kes Insure that bat.conf is not overwritten during installation.
1560 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1561 while I was implementing migration in March 2006 !
1563 ebl Cleanup file relocation, using char *RegexWhere instead of
1564 char *where + bool where_use_regexp
1565 kes Update some manpages and add bat manpage.
1566 kes Make a first cut at converting bacula.spec.in for bwx-console
1568 kes Apply patch from John Goerzen to add hostname as fourth argument
1569 to make_catalog_backup script.
1570 kes Fix typos I introduced into bsmtp.c
1571 kes Make pm_strxxx() routines handle input of NULL pointer. This
1572 is to protect from NULL pointers returned from SQL databases.
1573 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1574 kes Add more debug to FIFO code -- fix fifo regression test.
1576 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1577 kes Add thread timer to bnet_connect() to break from OS if wait time
1580 kes Update Win32 build to include new files, new symbols, and
1582 kes Implement socket level heartbeat (tcp_keepidle)
1583 ebl Commit File relocation patch
1584 kes Make bat have 'make install' target.
1585 kes Warn during install if old gnome-console binary found.
1586 kes Warn during install if old wx-console binary found.
1587 kes Add -8 option to bsmtp command line to add content type utf-8.
1588 Fixes bug #809. (Character coding problem in bsmtp).
1589 kes If < is found in target (from, to, cc) then do not enclose the
1590 target in < > in bsmtp. Fixes bug #772 (malformed address).
1591 kes When printing certain items in dbcheck, stop after 300000.
1592 Fixes bug #822. (dbcheck loops).
1593 kes Incorrect status in Dir after waiting for mount with poll set.
1596 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1598 kes Print waiting to reserve a device every 5 mins.
1600 kes Don't call close_part in label.c if tape and relabel.
1601 kes Don't free volume if busy in close() -- should help with
1603 ebl Fix #824 RunScript bug (After script could be execute twice)
1604 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1605 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1606 Add a regression script to test RunScript
1608 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1611 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1612 deprecated. No additional bugs will be fixed, and they will be dropped
1613 in a future release (probably 2.4.0).
1614 kes Change name of wx-console to bwx-console to make it more Bacula
1616 kes Change the name of gnome-console to bgnome-console to make it
1619 kes Some time in March, a Feature Request with patch from Jorj Bauer
1620 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1622 The ability for the director to validate a Client (FD) CN against
1623 an arbitrary set of patterns rather than the hostname, with
1624 A new 'TLS Allowed CN' set of directives which are implemented
1625 in the Client resource. Then pattern matching is used in place
1626 of hostname matching against the Certificate's CN. As an example, we
1627 have certificates which (a) use a local CA, and (b) have a CN of the
1629 kes Add new/changed entry points to Win32 build
1630 kes Create unaccepted-projects for projects that are not accepted.
1631 kes Simplify locking in the reservations system.
1632 kes Add more debug code in reservations.
1633 kes Make sure error condition on reserving a volume is handled correctly.
1634 kes Correct handling of volume_in_use.
1635 kes Correct handling of initializing a device.
1636 kes Move handling of broadcasting releasing a device into release_device().
1637 kes Correct attaching dcr to dev so that it is only done if device
1638 is properly initiated.
1640 kes Locking debug level tweaks in SD.
1641 kes Tweak new Volume code.
1643 kes Add exec external-command [wait-seconds] to bconsole. This
1644 executes the external-command. Note! normally external-command
1645 should be enclosed in double quotes.
1646 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1647 it should normally be off in a production system.
1649 kes Implement die command for SD so that we can force it to dump.
1650 kes Implement SD lock debug code.
1651 kes Implement new algorithm for keeping Volume list in SD. It
1652 is now owned by the device.
1654 kes Implement new code for freeing in use volumes that should
1655 resolve if not all, some of the problems of multiple drive
1656 tape conflicts described in bug 801.
1658 kes Fix gui/bacula-web/images files in svn.
1659 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1661 ebl Fix a bug in batch mode (in string escape)
1662 kes Correct migration prune SQL typo that crept in in a
1663 recent 2.1.x change.
1665 kes Move bnet_despool() into class in bsock.c
1666 kes Modify job report to include director name and Build OS.
1667 kes Move drop root privilege and check_catalog() before fork.
1668 kes Add update database scripts (version 9 to 10) to updatedb directory.
1670 ebl Check size and age of each file after its backup to see if
1671 it has changed during backup, if 'checkfilechanges' is set.
1672 The FD will do an extra check (stat(2)) after
1673 each file backup. mtime, ctime and size are compared with
1674 'before backup' information. If time or size mismatch, an
1675 error message will be generated. You must upgrade FD to use it.
1677 kes Make database name and user configurable
1678 --with-db-name=xxx --with-db-user=xxx
1679 kes Add back database type to message.c for debugging.
1681 kes Implement dir_sql() which issues an SQL query.
1682 kes Modify bat medialist to use dir_sql() and do some minor C++
1683 formatting as well as eliminating a number of pointers, simplifing
1686 kes Fix some of the mtx-changer grep commands for tape label readers.
1687 kes Convert a number of bsendmsg into the appropriate send/warning/error
1688 message class calls.
1689 kes Suppress the using database message in the .sql command.
1690 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1692 kes Add context menu for floating a window.
1693 kes Some minor cleanup and name changes in qt-console
1694 kes Add doing mt setblk 0 in Win32 mtx-changer.
1695 kes Apply Martin's bug fix to move definition of ENODATA for
1697 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1698 sqlite2 and sqlite3.
1700 kes More pruning cleanup.
1701 kes Turn on wait_for_drive by default in mtx-changer.
1702 kes Turn on Batch insert code by default as it now passes regression.
1703 kes Add ./configure --enable-bat to enable building of Bat.
1704 No install yet though.
1706 kes Implement a new .sql command for bat.
1707 kes Implement code to turn off pruning in obtaining the next volume.
1708 Pruning is turned off for the status dir command, but turned on
1709 for SD requests and for the list nextvolume command.
1711 kes Correct Qmsg() that was not updated correctly when committing a
1712 previous change (probably the recent TLS patch).
1714 kes Write new subroutine is_volume_purged() that explicitly checks
1715 if the Volume is purged, and if so marks it as such. This should
1716 resolve problems reported about needing to mount twice to recycle
1718 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1719 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1720 amount of duplicated code.
1721 kes Do volume pruning only for the Media Type desired (reduces pruning time
1722 if multiple Media Types are in the same pool).
1723 kes Implement more detailed info in the Job report for the Bacula version
1725 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1727 ebl Add bbatch tool to bench database and insert mode.
1728 Fix sql quote stuff in batch mode
1729 Fix sql stuff for mysql
1731 kes Correct problems with am/pm scheduling. Fixes bug #808.
1732 kes Implement new prunning code that prunes up to 1000 jobs at
1733 the same time. The same technique can be applied to a number
1734 of other prune/purge subroutines.
1735 kes Add an insanity check when starting a new tape job to ensure
1736 that the tape position has not been changed. If so fail the
1738 kes Fix Win32 build for dlls to add the folllowing:
1739 src/lib/bsock.c -- new file with new entry points
1740 src/lib/dlist.c -- new entry points
1741 src/cats/sql_create.c -- new entry point
1742 src/cats/sql_cmds.c -- new DATA item exported
1744 ebl batch mode cleanup bscan-test is ok now.
1745 kes Implement SD code to check length of disk volume before appending.
1747 kes Correct return status on db_batch... routines.
1748 kes Add call to db_write_batch_file_records() to migration code.
1749 ebl Fix AfterJob timing
1750 kes Move the checking of the database in initializion of the Director
1751 to after we drop privileges. This avoids the need for both root
1752 and bacula access to the DB.
1753 kes Correct a misplaced variable definition in src/filed/backup.c
1754 kes Correct how the new batch insert db_create_attributes_record()
1755 uses the arguments. Caused a seg fault in bscan.
1756 kes Implement lock() and unlock() methods in DEVICE class.
1757 Implement block() and set_block(xx) methods in DEVICE class.
1758 kes Modify bnet_connect() so that it uses time() to check for the
1759 wait time expiring (on some OSes, some system calls may not
1760 return immediately).
1761 kes Modify Verify to obtain the previous JobId when it is actually
1762 running rather than at schedule time (as it was in 1.38.x).
1763 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1765 kes When checking pid in pid file, continue running if the pid is
1766 the same as ours. This occurs on IRIX after a system crash.
1769 kes Extend new GUI API.
1770 kes Make the ua structure a class, and implement send_msg(),
1771 error_msg(), warning_msg(), and info_msg().
1773 kes Apply fix from for building wx-console on the Mac from
1775 kes Implement new select mechanism for GUI programs.
1776 kes Reorganize initialization of stackedWidgets in bat.
1778 kes Add updated nagios plugin supplied by Christian Masopust.
1780 kes More bat implementation.
1781 kes File migrate bug with Pool Occupancy using mediaid instead
1782 of jobids. Fixes bug #795.
1783 kes Fix orphaned buffers in filed backup and verify due to
1784 crypto buffers not freed during errors. Fixes bug #789.
1785 kes Extend new GUI api code to tree commands.
1786 kes Ensure that tree and dot commands check console ACLs.
1787 kes Permit marking directory with trailing slash.
1788 kes Allow 20 console connections (instead of only 10).
1790 kes Add smartctl call to bacula-sd.conf as an example of getting
1793 kes Modify jobq.c to let simultaneous restore jobs run. This may
1794 cause them to fail if they cannot get a drive.
1795 kes Add Client Connect Wait to Storage daemon to permit users to
1796 modify the time the SD waits for a FD connection.
1798 kes Correct virtual changer check which was backwards. This caused
1799 volumes to be unloaded into slots already occupied.
1801 kes Apply Command ACL filter to JobId list in restore command.
1802 kes Correct typeo in var.c patch.
1804 kes Don't let Bacula prune File or Job records for the current Job.
1805 kes Fix variable substitution pad + inc bug reported (with patch)
1808 kes Correct SQLite log table index as reported by Luca Berra.
1810 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1812 kes Begin implementing new comm signals for API.
1813 kes Fix a few places in lib/message.c where the open fd may
1815 kes Continue implementing lib/bsock.c (real class). Make jcr,
1816 who, host, and port private. There are new methods to access
1817 them for non-class use. This required touching a number of files.
1819 kes Add LANG=C to autoconf/randpass so it works with languages other
1820 than English. Fixes bug #788.
1822 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1824 You will not be able to generate Include/Exclude list any more.
1825 It will be fixed soon.
1826 If you want to use this, you can apply
1827 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1829 kes Restore of sockets created false error messages because Bacula
1830 no longer restores sockets, but the code was still trying to
1831 set the attributes on a non-existent file. Reported by a user.
1832 ebl finish RecyclePool feature
1833 Media will takes Pool.RecyclePool
1834 when moving from Scratch to a Pool or when user will do
1835 update volume=xxx frompool
1836 To use it, add RecyclePool = aPool to your Pool resource
1839 RecyclePool = Scratch
1843 kes Expand new BSOCK class adding signal() and new BNET signals.
1844 kes Begin enhancing the dot commands adding a new API function
1845 that returns more information and will make it easier
1846 to interface to the Director from a program.
1848 kes Make DEVICE fd private. Its new name is m_fd, and can be
1849 obtained with dev->fd() outside the class. This is the
1850 first of many DEVICE members to be made private.
1851 kes Implement Michael Renner's idea on having a virtual disk
1852 changer. I made some minor modifications (e.g. I did not
1853 implement the Virtual Changer directive, but simply set
1854 the Changer Command to an empty string.
1856 kes Implement a BSOCK send() method that writes the whole record
1857 in a single write() request rather than in two.
1858 ebl add update volume=xxx recyclepool=yyyy
1859 volume takes recyclepool from pool when using update volume=xxx from pool
1861 kes Fix encryption deblocking bug, which caused some restored files
1862 to be truncated. This fixes bug #763.
1863 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1864 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1866 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1867 ebl Use btime_t instead of uint64_t in media patch.
1869 kes Optimize the use of the database a bit in the Status dir command.
1870 Only open it when needed, ensure that if any previous database
1871 was opened, it is closed.
1873 kes Correct VolCatBytes bug from media patch.
1874 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1875 in the case of orphaned records.
1876 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1877 and File records in 300K chunks to be more efficient. This
1878 idea came from Juan Luis Frances (if I remember right).
1879 kes Apply Eric's scratch patch that moves a purged Volume to
1880 the RecyclePool. Question: how is RecyclePool set? what
1881 happens to the ScratchPool?
1882 kes Apply Eric's media patch that collects read/write media
1883 times as well as byte counts. This patch requires a
1884 simultaneous upgrade of the DIR and SD. Note, there
1885 should be some way to turn off timing. I'm not sure
1886 times are in Bacula units.
1887 kes Apply Eric's batch-insert patch.
1889 kes Update projects list.
1891 kes Implement Include/Exclude file lists in FD as dlists using
1892 the new dlistString class. This permits efficiently having
1893 large include/exclude lists and completes project Item 25.
1894 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1895 console is authorized to cancel the job. This fixes bug
1897 kes Modify SD so that the VolCatJobs medium record is updated
1898 at the beginning of a Job rather than the end. This
1899 fixes bug #775 where exceeding MaxVolJobs caused jobs
1901 kes Added a mutex around getting and setting Volume information
1902 so that multiple simultaneous jobs will single thread.
1904 Switch to using Subversion
1905 kes Remove src/pygtk-console/ from configure
1907 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1908 plus the entrypoints.
1909 kes Apply patch supplied that corrects debug print
1910 in canceling jobs for max run time. Supplied as
1911 part of bug #621, which was previously fixed.
1913 kes Test on job_canceled() and sd_msg_thread_done inside
1914 loop starting the message thread to avoid a race condition.
1916 kes Remove rl_catch_signal from console.c as it conflicted
1917 with the header definition. Fixes bug #765.
1918 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1920 kes Clarify some stored/acquire messages to indicate if the
1921 problem is with read or append.
1923 kes Fix memory leak with storage ids in cats/sql_get.c
1924 kes Terminate watchdog earlier to avoid reference to released
1925 memory -- reported by Jason Austin.
1926 kes Move closing the database from jobq.c to the director daemon
1927 termination routine. This fixes memory leaks for shadow jobs
1928 (i.e. migration jobs).
1929 kes Free up the unique jobid chain items in migrate.c. This fixes
1930 a memory leak problem.
1931 kes Convert some ugly looking for statements to use foreach_alist
1932 in findlib/find.c. This will facilitate converting the structures
1933 to use dlist (for large include/exclude lists).
1934 kes Fix a bug in the btree.c and btree.h routines, then rename them
1935 rblist and add them to be built in src/lib. Include some new
1936 methods written by Rudolf Cejka that make the code more readable
1937 (hides some of the ugly casting).
1938 kes Add set_next() and set_prev() methods which make the code much more
1939 readable. Also add a new dlistString class that facilitates storing
1940 strings in dlists. To be used in the large include/exclude lists.
1941 kes Make some trivial modifications to lib/tree.h that use rblist
1942 rather than dlist for storing the tree links. This was suggested
1943 by Rudolf Cejka. The result of this is that the restore tree now
1944 uses red-black binary trees rather than simple linked lists. This
1945 should give rather dramatic speed improvements for directories
1946 contining large numbers of directories/files (more than 10000).
1948 kes Fix maxruntime bug #621.
1950 ebl Implement the include JobID in spool file name project.
1951 kes Reorder projects file in order determined by Jan 2007 vote.
1952 kes Implement item #12 on project list -- quick release of FD by
1954 kes Fix open of SQLite3 db where user does not have write permission
1955 so that DIR does not crash. Fixes bug #761.
1957 kes Add back missing @ in Win32 Makefile.
1958 kes Change 'Device not configured to autolabel' from INFO
1960 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1961 which should restart an indefinite # of times.
1962 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1963 other DIR specifications.
1965 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1966 Fix path quoting in SQLite scripts.
1967 Fix problems with SHGetFolderPath.
1969 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1971 kes Fix Job restart on error bug that promotes an Inc to a Full
1972 backup. This should fix bug #755.
1973 kes Add qt-console and first cut of code.
1977 kes Fix Bacula->Documentation link on Win32 to point to index.html
1978 instead of bacula.html. Fixed bug #750.
1979 kes Return JobId in db_get_job_record() when JobId==0. This should
1981 kes Do not release source pointers when restarting a failed job.
1983 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1984 This *should* fix bug #747.
1985 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1988 kes Modify USTORE constructor to set an empty store_source string,
1989 and don't copy the store_source string in a cancel. Hopefully
1990 this will fix Arno's seg fault, bug #744.
1991 kes Add back code to disable conio in configure. Fixes bug #743.
1992 kes Correct the Options scanner in the FD to correctly handle
1993 SHA1 option, which was eating the next option. Reported by
1995 kes Add code to indicate when the SD is spooling, spool wait, and
1996 despooling as requested by Alan Brown.
1998 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob