1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 ebl Modify faketape driver to avoid sparse file.
29 kes Add make clean of qt-source directory during ./configure
30 kes Store last block number written to tape in DEVICE and
31 use it for testing for correct last block on EOT.
33 Release Version 2.4.0:
37 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
40 kes Add create_postgresql_database.sql to Win32 installer. Should
41 fix problem reported by Juilio Monteiro.
42 kes Get correct slot when auto unloading a device. This fixes bug
45 kes Fix multiple media restore.
46 kes Make DEVICE Slot private and access it via a method.
47 Allows better control over when it is set and cleared.
48 kes Fix possible seg fault if SQL error.
50 kes Add Martin's fixes to argument scanning for the estimate
51 command. This fixes bug #1093.
52 kes Add debug code to SD.
53 kes Fix renaming a Volume, which used the wrong Volume name.
55 kes If operator has rewind tape, print warning, release tape and
56 try once more. If tape is positioned somewhere, something went
57 wrong, so mark the tape in error and try once more. Previously
58 this error was fatal, now it produces an error message.
59 kes Ensure correct volume name displayed during restore
60 kes Ensure that Volume is mounted for restore.
62 kes Fix a few more Coverity reported problems.
64 kes Apply Allan Black's status dir job count patch.
65 ebl Add information about IMPORT/EXPORT slots in mtx-script.
66 kes Enhance a couple of SD debug messages.
67 kes Tweak unload flag setting and ensure it is set during swap.
69 ebl Fix #1091 about bad output in estimate command.
71 kes Modify autochanger locking to attempt to avoid race
73 kes Make sure device not busy before doing label command.
74 kes Display open() errors except when polling. Previously too
75 many were suppressed. This should fix bug #1070.
76 kes Fix Win32 reparse points. Bacula will not recurse into any
77 reparse point directory, including mount points, unless the
78 directory is explicitly mentioned at the top level (same as
79 with Unix). A file that is linked to another file will be
80 backed up -- much as Unix does for hardlinked files.
83 kes Remove double quotes from ChangeLog and ReleaseNotes
84 kes Remove StorageId test when pruning and recycling (Eric's changes).
85 kes Remove old form of locking when getting volumes -- causes deadlock.
86 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
87 the name unique and to eliminate compile time error.
88 kes Add accurate.o to Win32 FD Makefile
90 kes Fix cats dll build on Win32 after db_update_job_end_record
91 calling sequence change.
92 ebl Switch to tokyo dbm instead of htable in accurate code
93 ebl Include tokyo dbm to bacula source tree
95 kes Fix buffer overruns detected by Coverity.
97 kes Tweak joblog display.
99 kes Implement --without-qwt
100 kes Fix layout of restore tree dialog
101 kes Add configure bat QWT libraries, so that bat can be built
102 with or without the QWT libaries.
104 ebl Add dummy tape driver for regression tests.
105 kes Make sure we unload the right slot when swapping.
107 kes Add debug times, reduce size of two-pool-changer test
109 ebl Tweak autoconf scripts for faketape
111 kes Improve SD reserve debug code.
112 kes Testing an improvement to free up volumes no longer in use.
114 kes Rework SD acquire for read to handle autochanger Volume
116 kes Implement regression that explicitly tests swapping a Volume
117 from one drive to another.
118 kes Enhance disk-changer to detect most error conditions.
119 kes Fix SD code so that it properly swaps a Volume between drives.
120 This fixes bug #1083.
122 kes Apply libdbi patch from Joao Freitas for regress and for
123 Bacula trunk. Regress now works with libdbi. Nice.
124 kes Apply .nobackup patch from bug #1077 submitted by
126 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
127 name into jobs cloned via the run directive.
129 kes Prevent a Volume that is being swapped from being freed from
130 the volume list. This will most likely fix, at least partially,
132 kes Fix strippath so that it does not get a buffer overrun and crash FD.
133 This fixes bug #1078.
134 kes Remove 50 millisec wait in SD that broke debugger.
135 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
136 that a job may run, counted from when the job was scheduled.
137 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
138 a job may block waiting for a resource, counted from when the job starts
139 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
140 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
141 that implements multiple commands per line in the console when using
142 readline. Modify the default to use a semicolon as the command separator.
144 ebl Fix SQL query in migration code.
145 ebl Make accurate mode with hash disk pass regression tests
147 ebl Implement first cut of accurate backup with hash disk.
149 kes Force unload of volume when wrong volume mounted in SD.
151 kes Fix bat seg fault at termination.
152 kes Add Bacula generated version to bat about box.
155 kes Experiment with allowing multiple read jobs.
156 kes Move final volume swapping code to DCR method and
157 call it from acquire_for_read().
158 kes When wrong volume is mounted during read, unload_autochanger.
160 kes Integrate the libdbi changes from Joao Henrique Freitas
162 kes Stop searching for Volumes in SD askdir if DIR returns the
163 same volume name twice in a row.
164 kes Close bat console windows first to eliminate error message
167 kes Tweak the swap Volume from one drive to another code so that
168 it now seems to work.
169 kes Resolve several problems with recycling that broke the new
170 code (these problems are in 2.2.9 as well).
171 kes Remove the volume lock when calling the sysop code.
172 kes Don't mark a reserved volume with no writers as unused otherwise
175 kes Rework class structures for VOLRES, DCR, and DEVICE to make
176 the method names a bit more logical, and for more logically
177 handling the responsibilities.
179 kes Remove redundant code in terminating the scheduler that just
180 causes a seg fault in many cases.
181 kes Cleanup releasing a volume and make it a DCR method.
182 kes Improve algorithm for detecting pre-reserved volume and
185 kes Tweak volume swapping code so it works.
186 kes Correct name overloading in mount.c
187 kes Replace released flag in VOLRES with reserved and add access
188 methods for the VOLRES class.
189 kes Prevent volume from being released while being swapped.
190 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
192 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
194 kes Refactor parts of stored/mount.c
196 ebl Add sanity checks for VolWriteTime and VolReadTime
197 ebl Take care of bad clock changes while computing VolWriteTime
198 and VolReadTime. This should fix or limit #1066
199 kes Correct error string numbers in dird/catreq.c
200 kes Restructure reserving, acquiring, and mounting volumes. Calls to
201 autochanger are deferred for mount.c -- simplifes the code.
203 kes Do not prune any running job. It just fails the job.
204 kes Lock the volumes when changing dev->reserved_device and marking
205 the volume unused otherwise the device can get reserved by
206 another job before the volume is released, thus blocking it.
208 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
209 kes Fix bug #1063, reuse of freed ptr in list nextvol.
210 kes Release regex compile buffer in filed/job.c
211 kes Add proper type of const char in sql_create.c
212 kes Turn off debug in daemon termination routines
213 kes Move free_volume_list() before devices are freed in stored.c
214 kes Fix reference to uninitalized stack variables in bregex.c.
215 This should correct bug #1067.
217 kes Fix possible seg fault in SD when freeing a volume entry.
219 kes Implement unload_dev() before swap device.
220 ebl Add statistics prunning with option and menu
221 kes Separate unload_dev() from unload_other_device() in autochanger.c
223 kes Apply patch from bug #1069 that corrects spurious error messages
224 when ACLs enabled on SGI but no ACL exists.
225 ebl Fix small segfault in bacula-sd when debug level is 500
226 kes Modify run_program() and run_program_full_output() to use
227 call by reference for the results string. This corrects a long
228 standing problem where the address of the string may be changed
229 in the subroutine but not in the calling program.
231 kes Re-enable code to remember last volume mounted on a non-tape
233 kes Add patch supplied in bug #1068 that fixes a SD crash when using
234 a Virtual autochanger.
235 kes Generate correct JobMedia records during spooling/despooling when
236 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
237 <tih@hamartun.priv.no> for excellent analysis and testing.
239 kes Tweak hash algorithm for htable using Martin Simmons idea
240 for doing a circular shift.
241 kes Remember what volume is in VTLs (previously turned off for
243 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
244 pointed out some problems in creating JobMedia records during
245 spooling with concurrent jobs. Fix the problem by updating the
246 start file position before despooling and generate a jobmedia
247 record at the end of despooling.
249 kes Fix handling of JobMedia records during spooling and when a
250 Volume is changed without actually writing data to the Volume.
252 kes Rework certain SD locking based on gdb tracebacks of deadlocks
253 sent by Eric. This code now uses only the volume_lock() rather
254 than the reservations lock when at EOM and acquiring a new
256 kes Ensure only one exit point in several subroutines.
258 kes Implement bsock code to permit locking. Use the new code in Verify
259 in the FD to prevent the heartbeat thread from disrupting the Verify
260 data sent to the Dir.
261 kes Modify SD locking to eliminate locking the reservations system from
262 outside the system. Use the volume lock when getting media data
263 and reserving a new volume at end of media.
264 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
265 when SD starts are not locked into place.
267 kes Fix error compiling runscript code on 64 bit machines.
268 kes Tweak Win32 mount point code.
269 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
270 cleared giving bad file estimate).
271 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
274 kes Keep Schedule run lists in order as suggested by
277 kes Implement autostart scripts for Debian.
278 ebl Implement upgrade catalog scripts.
280 ebl Apply jobstat patch for long term statistics. Have to implement
281 purge stats command and upgrade scripts.
282 kes Fix mtx-changer.in for broken Debian mt program.
284 kes Fix large number of JobMedia records reported by Eric Bollengier.
286 kes Apply doc fix from bug #1062.
287 kes Resolve crash and improper restore wx-console Win32 restore
288 GUI. Fixes bug #1065.
289 kes Update Win32 wxWidgets to latest version.
290 kes Attempt to do correct handling of Win32 mount points. Should
292 kes Fix Win32 FD backup/restore memory leak due to improper termination
293 of BackupRead/Write. This fixes bug# 1038.
295 ebl Reduce memory usage for accurate backup, working only with ctime
296 and mtime. (not all Lstat field)
297 About 40MB for my linux system (400.000 files)
299 kes Add dcr->reserved_volume flag that allows us to release a volume
300 even if it is not vol->released. This allows maxvol2 to work when
301 Volumes expire and we are already writing to the device (i.e. a
302 volume is pulled out from under us by another job terminating after
303 we reserve the drive).
305 ebl Permit multiple command/console per runscript definition.
306 RunScript { command = /bin/true ; command = /bin/false ... }
307 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
308 (restart an application) just after the VSS snapshot on windows.
309 kes Don't zap dcr values during release_volume() as they might
310 have the next Volume to be mounted.
311 kes Fix AIX prototype.
313 kes Second cut of drive switching during backup.
316 kes Update Win32 version of wxWidgets to most recent version.
317 kes Tweak Copy job details.
318 kes Rework dir_find_next_appendable_volume to make a bit more effort
319 to find a suitable volume before giving up.
321 kes Make ask_sysop_to_create... to return if waken from wait.
322 This helps get out of blocked conditions.
323 kes Experimental implementation of switch_device in reservations.
324 kes Implement FD version to allow easier protocol changes.
325 kes Add Plugin Options string -- not yet passed to FD.
326 kes Implement PluginOptions ACL.
328 kes Attempt to correct problems with restores with autochangers and
329 use counts going negative
330 kes Rework SD status command and implement API for bat. Implements
331 header, runing waitreservation, devices, volumes, spooling,
332 and terminated status keywords.
333 .status storage=xxx <keyword>
334 kes Clarify TLS error message by adding double quotes around name.
335 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
336 kes Pass jcr to tls routines so debug messages can be handled better.
337 kes Rework jobq resource allocation code, and possibly fix a bug
338 that caused reference counts to get out of sync.
340 kes Rename fd/dir plugin to use Bacula standard underscore.
341 kes Plugin work -- bring dir up to fd level.
342 kes Start implementation of VTL code
343 kes Fix Win32 build after adding new cats subroutine.
345 kes First cut at Duplicate Job implementation.
347 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
348 kes Start PluginOptions string, and refactor a bit of ua_run.c
349 ebl Apply Allan patch that permit to reset recyclepool.
351 kes Test patch -- possible fix or improvement for bug #1053
352 kes Refactor FD and SD status commands to permit new API code in
353 SD, and to fix Win32 build.
354 kes Win32 build is now working.
356 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
357 some ideas in patch from Scott Bailey.
358 kes Begin implementation of duplicate Job control.
359 kes Fix some of Win32 build after recent additions.
360 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
361 which causes the FD to detect whether or not the OS has the
362 honor no dump bit (*BSD systems), and if so, to skip backing up
363 any file with this bit set. The feature is enabled by setting
364 'honor no dump flag = yes' in the Options section of a FileSet.
366 kes Correct po warning message with datarootdir
367 kes Implement more code in dird.c to put configuration parsing in
368 a class rather than use globals.
369 kes Restructure SD status command for implementation of bat API
372 kes Suppress incorrect 'Will not descend from x into y' messages.
373 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
374 daemon globals used by parser.
375 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
377 kes Fix free of plugin_list when none exists.
379 ebl Apply accurate project patch.
381 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
382 on non-mempool object)
383 kes First cut of converting FD .status to work with bat API.
385 .status client=XXX header
386 .status client=XXX running
387 .status client=XXX terminated
388 kes Implement first cut of Copy Job.
389 kes Implement Catalog in Pool resource. It overrides catalog specified
390 in the Client resource.
392 kes Apply patch (with some difficulties) from Joao Henrique Freitas
393 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
395 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
396 ftruncate() actually works. In the case of some (cheap) NAS devices,
397 it does not, and so recycling NAS Volumes does not work. The code
398 simply unlink()s the file, then recreates it. This fixes bug #1011.
400 kes First incomplete cut of big malloc blocks for htable.
401 kes Tweak plugin code.
403 kes Plugin debug code + tweak a couple bat dialog layouts
405 kes Fix creating first JobMedia record during Migration to include
406 proper index. This caused slow restores of migrated jobs.
407 kes Temp fix to plugin name file_index.
408 kes Bacula backed up and restored a MySQL database.
410 kes Implement plugin restore.
411 kes Implement parsing of db_driver to give db_type index.
413 kes First cut of plugin restore code.
414 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
415 and do not strip paths on symbolic links.
416 kes Set catalog backup database and user name from values specified on
417 the ./configure line.
418 ebl Fix #1031 about wrong pool source information in job report.
421 kes Remove a redundant jcr argument to find_files, match_files, and
423 kes Implement '.status dir header|scheduled|running|terminated' that
424 prints the requested status section. With the exception of the
425 header, the other reports have fields separated by tabs (\t).
427 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
428 a resource embedded run command to find a since time if no explicit
429 since time was supplied on the command line.
430 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
431 that updates the state file at job termination time in addition to
432 when the daemon terminates.
434 kes First version where a plugin did a backup.
435 bpipe-fd.so created a backup file, wrote a test
436 string to it, and Bacua could restore this fabricated file.
438 kes Implement DB Driver = string for the DBI driver.
439 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
440 kes First cut of code for loading Win32 plugin dlls. Implement
441 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
442 and implement a dlfcn.h file based on opengroup's definitions of
445 kes First cut plugin directives.
447 kes Apply patch from bug #1049 to prevent stripping the path on a
449 kes Attempt to fix bug #1047 where stripping a path corrupts the
450 heap. Waiting for feedback.
451 kes Correct the Mount message not to suggest labeling a new tape
452 when doing a restore. Submitted by email by John Stoffel.
453 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
454 FD by using casting. Reported in bug #1042.
456 kes A bit of crypto cleanup. More later.
458 Release Version 2.2.8
460 kes Apply patch from Martin to correct bug #1040, bscan sets existing
462 kes Fixed important spelling error in doc -- bug #1045.
464 ebl Fix bextract to be able to extract non-portable Win32 data to
466 kes Move initialization of read/write res lock earlier in the code.
467 This fixes the crash with a null conf file. This fixes bug
469 kes Redefine CURES in lib/parse_conf to be URES and move it all
470 into lib/parse_conf.c -- this responds to bug #1042, but does
471 not fix it. The fix is not to compile with FORTIFY_SOURCE.
472 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
473 the trunk SVN. I don't think this was reported as a bug.
475 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
477 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
479 kes Add DataDespooling and DataCommitting status (committing is
480 the last despooling).
481 kes Finish implementation of new reservations code noted below.
483 kes Fix bsnprintf for float point numbers. I broke recently when
484 parameterizing some variables. This fixes bug #1036.
485 kes Undo recent reservations changes ... will apply them later
486 when they work better.
488 ebl Fixes #1034 which cause mysql to hang the connection after 8h
489 ebl Change default statistics target of filename.name and path.path
490 fields for PostgreSQL. This speeds lookup by indexes. Thanks
492 kes A few more tweaks to new reservation code. Make sure to clear
493 vol released flag when retaking volume. When reading label and
494 label is bad mark volume unused. When recycling, mark volume
495 unused so it can be renamed.
497 kes Fix reserve_volume() so it doesn't release a volume in use
498 (i.e. a volume entry not marked released). This should be
499 the last part needed to fix bug #1018.
501 kes Move Heartbeat documentation from Job to Director resource.
502 This fixes bug #1033.
504 kes Fix existing switch drive SD code to call autochanger to release
505 any old volume. This must be done to keep the autochanger from
506 releasing subsequently newly reserved volumes in doing a close().
507 This should fix bug #1018.
508 kes Fail if attempting to get console input in batch mode. This
509 should help fail RunScript console commands that are incomplete.
510 kes First cut implementing switch_drive() in SD (not actually called).
512 kes Implement first cut running console commands in a RunScript.
514 ebl Fixes bug #1028 where 'Selection Type' option was not usable
516 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
519 Release Version 2.2.7
521 kes Add new free_tls() entry point so that Win32 builds.
522 kes Fix compile warning in src/lib/util.c
523 kes Fix entry point for edit_job_codes() so that Win32 builds.
524 kes Fix seg fault Frank Sweetser reports in regression testing
525 on his systems. The problem was that the original author of
526 bsnprintf.c did not take into account the side effects of
527 using ++x in the argument to a #define.
528 kes Make SD protocol backward compatible with version 2.2.x.
530 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
531 because Bacula no longer restores sockets.
532 ebl Always use ignorecase fileset option on win32 FD.
534 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
535 that implements double quoting include names in conf files,
536 and also allows piping input by having the first character
537 be a vertical bar (|).
538 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
539 that implement %f in RunScripts to pass the FileSet name.
540 kes Skip leading | when lex input comes from a pipe as suggested
541 by Michael Stapelberg <michael@stapelberg.de>.
543 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
544 Nerijus Baliunas <nerijus@users.sourceforge.net>
546 kes Implement Plugin Directory and plugin events.
548 kes Implement a security enhancement: TLS authentication but no
549 encryption. Enabled by setting 'TLS Authentication = yes'.
550 Note when this is on, TLS encryption is turned OFF!
552 kes This patch corrects a problem where the maximum concurrent storage
553 jobs counter gets out of sync during restore jobs causing jobs to
554 'wait on max Storage jobs'. This patch fixes bug #1009.
556 kes This patch fixes bcopy so that it produces correct Volumes.
558 kes This patch eliminates spurious output to the console during a VerifyVolume
559 job that contains encrypted data. It fixes bug #1024.
561 kes This patch prevents the 'status dir' command from trying to use a scratch
562 volume and possibly moving it from one pool to another. This patch fixes
565 kes Add new include to postgresql.c suggested by Marc Cousins so
566 that it compiles correctly with pgre version 8.3.
568 kes Fix --archivedir addition to configure. Replace it with
569 --with-archivedir in configure.in This fixes the regression
571 kes This patch fixes bug #1012 where the job is canceled because
572 of Max Run Time exceeded when the job has not yet started.
574 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
575 one 'part' to write. Instead of each part being stored on disk,
576 written to DVD, then deleted from disk, all parts are written to disk,
577 and only the last is written and deleted from disk.
578 kes This patch fixes the status command to include the formating string for
579 JS_AttrInsterting. It fixes bug #1021.
580 kes This patch should fix the Mac OS X build problem on the latest
581 Darwin, where sys/types.h was not included correctly (apparently
582 due to a change in the Mac headers). The solution was to explicitly
583 ensure that it is defined for the ./configure.
584 This patch also has a rebuild of configure that includes the Debian
585 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
586 kes This patch should ensure that queued messages to the console are
587 displayed as soon as possible. It should fix bug 1007, but has been
588 reported not to work.
590 kes This patch fixes the infinite loop when trying to increase the
591 maximum number of volumes in a Pool during the add command.
592 This patch fixes bug #1008.
594 Release Version 2.2.6
596 db Remove extra data on estimate command in joblist for bat.
598 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
599 really change anything, but is the beginning of doing it *right*.
600 To do it completely right the LastWritten date must be passed to
601 the SD, but it is not yet done.
602 kes Minor tweaks to some bat restore SQL.
603 kes This patch fixes bug #1003 where putting the message output from
604 a Verify job into the catalog results in a recursive loop. The problem
605 seems to show up only with postgresql (to be verified).
606 kes Correct %x to %p in postgresql debug statement.
608 kes Fix bug #942 where lots of emails where generated when the heartbeat
609 interval was low and Bacula wanted a different tape from the one in
612 ebl Add new SD despooling attributes and Dir inserting attributes
613 job status codes in the catalog (Status table).
615 ebl Use qmake-qt4 instead of qmake when available (debian system).
617 kes Add a security warning to src/cats/make_catalog_backup.in indicating
618 that passing the password via the command line (arg 3) is insecure.
619 This responds to bug #990 (it doesn't fix it).
621 kes Set default debug_level to zero. This corrects bugs #991 and #993.
622 kes Fix a crash in bat when it cannot connect to the Director for example
623 if the Director is not running.
624 kes Remove redundant INDEX (JobId) from File table in the trunk.
626 kes Make explicit exception to GPL in LICENSE to permit linking
627 the Win32 FD with Microsoft VSS code.
628 kes Apply the Solaris package patch from
629 Masopust, Christian <christian.masopust@siemens.com>
630 kes Apply the patch to optionally add a timestamp in the debug output
631 submitted by Mariusz Czulada <manieq@wp.eu>.
633 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
634 backend (sql_strerror). Fixes bug #989
636 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
637 It applied with no problems.
638 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
640 kes Redirect stderror to stdin on mt status command in mtx-changer.in
641 since the status is returned on stderr on Solaris.
642 kes Activate Close button on tray-monitor window. This fixes
644 kes Check for NULL item in parse_conf.c before calling it. In the
645 case of Device, there is no item and this caused a seg fault when
646 Device appears in the conf file.
647 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
648 avoids pulling in config.h multiple times in some new code.
650 kes Fix spurious warning message printed when creating a volume with
651 a LabelFormat. This fixes bug #976.
653 Release Version 2.2.5
655 kes Add JobId in place of Job name in all the Jmsg() output.
656 kes Correct the APP_DESC for the Win32 storage service (remove an e).
658 kes Make maxvol-test and new more strict maxvol2-test work.
659 kes Print JobId in all Jmsg() job output.
661 kes Add new SD despooling attributes and Dir inserting attributes
662 job status codes. This fixes bug 961.
663 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
665 kes Fix doc issue. This fixes bug #963.
666 kes Fix listing performance problems in bat. Pointed out by
668 kes Remove old debug code.
669 kes Fix bat code that tests for Win32. This should fix bug #968
670 kes Query 5 list wrong Vol after migration. This fixes bug #960
672 ebl Fix #969 where user can't change Replace option in restore menu.
674 kes Save jcr in thread specific data (tsd) for each thread.
675 kes Make Dmsg() print JobId as -%u.
676 kes Make Jmsg, Emsg, and others automatically pickup the jobid
677 for the thread if it exists.
678 kes Remove old reservation debug jid code.
679 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
680 ebl Add an option that permit to specify spool size in job
681 definition. (Applying patches/testing/spoolsize_per_job.patch).
682 You must upgrade SD and DIR at the same time.
683 dvl Add new configuration item --archivedir
684 dvl Adjust regression tests to use tmp not /tmp. This will allow
685 multiple concurrent runs of the regression tests.
687 kes Fix race condition that drops final block written to volume.
688 This happens in rare cases with multiple simultaneous jobs
689 when the Volume fills. This fixes bug #964. May be related
690 to bug #935 and possibly #903.
691 kes Eliminate more strerror() and replace with bstrerror().
692 kes Remove BSD getopt and replace with unrestricted IBM version.
693 kes Fix Win32 build for changed calling sequences.
694 kes More tweaks to the mount volume routines to get everything
695 right. Changed variable name from find to have_vol, which is
696 much easier to understand.
697 kes Enhance btimer debug code.
699 kes Fix FD->SD authorization failure, which was due to spurious
700 wakeups from a pthread_cond_timedwait(). Simply check the
701 predicate before continuing. This fixes bug #953.
702 kes Add const char where needed (more to do). Remove temp debug code.
704 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
705 kes Don't overwrite error message in check_tables_version.
707 kes Unlock batch insert tables with same calls used elsewhere.
708 kes Allow starting 59 jobs a second.
709 kes Make SD session key more random.
710 kes Add retry for SQLite opening db if it fails. Probably helps
712 kes Suppress extra error messages during batch insert failure.
714 kes Add jcr to timer packets so if killed message can be sent to job.
715 kes Add JobId to all Dmsg() output.
716 kes Put some FD auth code on dbglvl rather than fixed.
717 kes Return insert attributes error message in db msg buffer to avoid
718 false error messages. Helps fix bug #966.
719 kes Separate batch init error messages. Probably helps fix bug #966.
720 kes Make SD code that contructs attribute insert check string lengths
722 kes If Dir gets an error during inserting attributes, cancel SD.
723 This reduces unnecessary error messages.
725 kes Correct search boolean for getting Volume info
726 ebl Cleanup batch insert code. Probably fixes bug #965.
727 kes Back out one small change to the reservation system (reserving a volume).
728 kes Rework how a Volume is mounted. It is now much more intelligent and
729 will always attempt to use any mounted volume if possible and reduces
730 calls to the Director asking about volumes.
732 kes Turn off some code when batch insert not enabled.
733 kes Edit FD name in connect error messages.
734 kes Rework the reservation system to take into account that the Director
735 might give us a Volume that is different from the current one being
736 used, and to ensure that we don't exceed Maximum Volume Jobs.
737 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
738 fatal error with multiple jobs running'
739 kes Add more debug code in reservation system.
740 kes Implement maxvol-test to check bug #947.
742 kes Add code to handle tray monitor separated from Win32 FD.
743 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
745 kes Add missed return in fixing verify bug -- trunk only.
746 ebl Fix a command parser issue causing a director segfault.
747 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
749 kes Increase the max block size to 4MB fixes bug #957.
750 kes ERABT if user sets min block size > max block size. Fixes bug #956.
751 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
752 is not properly mounted (recognized) during a poll.
753 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
754 Job that has differences reports Verify OK.
755 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
757 ebl Add an option to operate on all pools with update vol parameters.
758 This complete the project 20. Patch from Nigel Stepp.
759 ebl Add history support to bconsole when using readline.
760 Using Ctrl-D to exit doesn't update .bconsole_history
761 kes Modify new volume algorithm to use max MediaId for generating next
762 volume number rather than the count of Volumes. This should essentially
763 eliminate the failure rate if some volumes were deleted. Bug #921.
764 kes Begin implemention of Optimize Job Scheduling.
765 kes Implement restore callback that Dirk and I agreed on for bat
766 restore. This fixes bug #928. Restore of backup of zero files fails.
767 kes Fix SQL Catalog logging which broke with new db_escape_string
770 Release Version 2.2.4
772 kes Fix bacula_cats.def for new db_escape_string().
773 kes Increase size of name string when FD making connection to SD.
774 May fix bug #953. FD->SD connection failure.
776 kes Add code to help Dan debug 2drive-incremental-2disk test.
777 kes Add code to try to fix bug #908.
778 kes Add waits to multiple exit detection code to try to force pid
779 file to always be deleted.
780 kes Restore good dev.tar.gz to rescue set appropriate binary property.
782 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
783 trying to switch drives by checking for blocking before unblocking.
785 kes Cancel storage daemon in all cases where FD reports error. This
786 should fix virtually all cases of bug #920.
787 kes Fix db_escape_string() for MySQL which did not compile.
789 kes Fix error message that was clobbered when Dir tells SD it does not
790 have write permission on Volume. This should fix a minor point
791 in bug #942, but not the main problem.
792 kes Add code to cancel job in SD if FD connection fails. This should
794 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
795 dvl Pass jcr and db into db_escape_string() to enable better escaping
797 kes Fix migration code to get correct Volume name with multiple volumes
798 by skipping |. Fixes bug #936.
799 kes Implement patch supplied by Landon to fix bug #944 where using
800 TLS with bconsole uses 99+% of the CPU.
801 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
803 kes Move patches into patches directory.
805 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
808 ebl Using 'm' in bconsole will show messages like before,
809 and not memory usage.
810 kes Fix bug #935, and probably also bug #903 where files were not
811 restored. MediaId was not properly set in JobMedia record after
814 kes Suppress chown and chmod error messages if the FD is not running
817 kes Apply Martin Simmons' patch that should turn off the new API usage
818 when batch insert is turned off allowing building on older
820 kes Add ./configure search in qwt-qt4 for qwt package
822 kes Bacula is now free of 3rd party GPL copyrighted code!
824 kes Add guid_to_name.c/h which replace idcache.
825 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
827 ebl Detect if new PosgreSQL batch insert API is present.
828 kes Correct incorrect mempool call causing Director crash. Occurs on
829 systems without va_copy().
830 sb Update spec files for 2.2.1 release
832 kes Fix memory pool call in ua_output.c. bug #934.
833 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
834 Add test program to fnmatch.c
836 kes Integrate patch to README.vc8 from
837 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
838 edit it to get it into Unix patch format.
839 kes Implement mkpath.c to replace old FSF makepath.c
841 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
843 Release Version 2.2.1
845 kes Update POTFILES.in
846 kes Cleanup a few underquoted AC_DEFUNs in configure
847 kes Apply patch from Martin Simmons that adds a test for va_copy to
850 kes Fix bug #921 by increasing the number of tries to create a new volume
852 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
853 can be called multiple times. Implement a version for machines
854 without va_copy() that gets a big buffer.
856 kes Integrate more portable zone offset code into bsmtp.c
857 Submitted by Attila Fülöp.
859 kes Fix bad SD->FD return status reported by
860 (James Harper) <james.harper@bendigoit.com.au>
861 ebl Fix a bug in read_close_session which return random status
862 thanks to James Harper
864 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
865 and directory names during restore of single file/directories.
866 kes Add sanity checks to .sql command when string is empty. Hopefully
867 that will resolve Dirks Director crash.
869 kes Apply patch submitted by Martin Simmons that corrects a seg fault
870 in the bsmtp chat subroutine when debug is >= 10.
872 kes Fix Director crash when running bat SQL queries.
873 kes Add David's notes on Item 8: Copy pools.
875 kes Rework projects file to be current and ready for a vote.
876 kes Enhance lex scanner error message.
878 kes Tweak LICENSE file to mention BSD code.
879 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
880 if specified on the ./configure.
881 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
882 This class is intended to allow us to open a second bsock to the
883 Director while in the restore subdialog.
885 kes Fix configure to create bat Makefile before creating dependencies.
886 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
887 kes Add a tooltip to the tray monitor.
888 dvl Set the Director's PID file before dropping privs. This fixes
891 kes Update AUTHORs file
892 kes Increase the default max concurrent jobs to 20 in FD and SD to
893 correspond with the default .conf files.
894 kes Rewrite the Win32 service routines. This eliminates the 3 copies
895 some different, of the same file created by RN when porting the
897 kes Rearrange some of the Win32 directories and the placement of the files
899 kes Set DEVELOPER flag in version.h
901 ========================================================================
902 Release Version 2.2.0
904 kes Apply a second doc patch from Marc.
905 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
906 improves the tips section that discusses how to setup multiple
909 kes Update bat README file.
910 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
911 corrects a typo in the Recycle status check in db_find_next_volume().
912 This will probably fix a number of annoying problems with multiple
914 kes Modify most of dird/msgchan.c to use bsock class calls rather than
915 bnet calls -- no functionality change.
917 kes Modify the Verify output to specify if files are missing on
918 the Volume(s) or disk. Fixes confusion in bug #916.
919 kes When more than one Volume is read in a migration job, the last
920 Volume bytes reported are from the last read volume rather than
921 the last written volume. Fixed. This fixes bug #910.
922 kes Fix display of Recycle flag after update volume=foo recycle=yes.
923 It previously printed New Recyle flag is: no. This fixes bug
926 kes Correct seg fault when switching tape drives during restore.
927 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
928 be used until after 2.2.0 release.
930 kes Remove fnmatch() in SD that permitted wild card specifications.
933 kes Fix %g in filename returned by SQL for browse tree reported by
935 kes Fix configure so that it puts config.out in the cwd rather than
937 kes Attempt to fix the locking problem reported by Eric in bug #906.
938 kes Make berrno class to leave errno unchanged after constructor call.
939 kes Make bnet_server use the heap rather than the stack to allocate
940 its socket fd pointers to avoid a crash at termination. Problem
941 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
943 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
944 and putting it in depkgs-qt along with Qt4.3.
946 kes Rework code in acquire.c that switches drives for reading when
947 the Media Type does not match. This should fix bug #906
949 ebl Fix a director segfault during job setup #907
950 kes Correct seg fault in postgresql when first operation returns no
951 rows. Fixes Dirks File browser problem seg fault with bat.
953 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
954 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
957 kes Implement PopUp YES/NO dialog for bat.
959 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
961 kes Correct RunScript to terminate job in FD on failure.
962 kes Change abort_on_error and AbortJobOnError to fail_on_error
963 and FailJobOnError in RunScripts.
964 kes Minor tweaks of code formating in RunScripts, principally to
965 avoid depassing 80 columns.
967 kes Eliminate one #ifdef Win32 in bsmtp
968 kes Implement grow tool to grow a file for testing very large databases.
969 kes Add big-vol-test to test Bacula seeking with > 5GB.
972 kes Modify find_next_volume() to return all values in Media record.
973 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
977 kes Update Release notes
979 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
980 Warning, in previous beta version, all media get from scratch keep their
983 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
984 This should fix bug #842. Made a note to look at removing the temp
985 files at the end of the install.
986 kes Add ability to mount and unmount a file device providing it is
987 marked as being removable and has the appropriate mount and unmount
988 commands defined in the Device resource. This fixes bug #830.
989 kes When applying a storage override, release all previous storage
990 definitions rather than just prepending the new storage.
991 This should prevent a good deal of confusion.
993 kes Implement ./configure search for qwt libraries.
995 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
996 Win32 FD. This should fix bug #893.
997 kes Remove an unnecessary beep in Win32 init code.
998 kes Update copyright dates in Win32 executable about boxes.
999 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1000 code with a BSD getopt.c and getopt.h.
1001 kes Remove sched.h from the Win32 compat directory -- not used.
1002 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1003 need to shut it down, do it through the services panel or the command
1005 kes Remove some inappropriate Bacula FSFE copyrights.
1006 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1007 kes Fix regress config non-portable test as pointed out by
1008 Florian Heigl <florian.heigl@gmail.com>
1009 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1010 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1012 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1013 Reported by Frank Sweetser.
1017 kes Fix client-only build.
1018 kes Integrate client-only fixes for bsys (initgroups) and conio from
1019 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1020 kes Make arguments to get_scratch_volume() in same order as other
1022 kes Rework the prune_volumes() subroutine so that after purging and
1023 no volume found in desired pool, it will check for a scratch
1024 volume. This prevents recycling the whole scratch pool.
1025 kes Add code to status storage to print boffset_t (largefile support).
1027 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1028 kes You now need a --with-qwt=<dir> to be able to build bat.
1029 kes Update src/win32/cats/bacula_cats.def to include the new
1030 db_get_query_dbids() call on Win32.
1032 kes Correct a problem when selecting a scratch volume and moving
1033 it to another pool that lost some columns.
1034 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1035 kes Enhance Autochanger error messages to include Volume and device name.
1036 kes Rework prune_volumes() code to take account of InChanger flag,
1037 and to handle recycling volumes going to the Scratch pool and
1038 current pool because the RecyclePool directive.
1039 kes Implement a better and more efficient db_get_query_dbids() to
1040 handle creating and passing back a list of DBIds.
1044 kes Start work on new more efficient DBId subroutine. First use
1045 will be for recycling volume to Scratch inchanger.
1046 kes Increase number of JobIds in pruning from 1000 to 10000.
1047 This to be replaced by above routine.
1048 kes Begin implementation of building Qt4 on Win32.
1049 kes Correct typo in fix I added for bad TLS shutdown.
1050 kes Pull 2.0.3 patches into patches directory.
1051 kes Update Release notes. Include qt-console in line count.
1052 kes Update Projects file.
1054 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1055 bug in migration code where a job that spanned two volumes
1058 kes Implement new BST_DESPOOLING blocked state. Change from locking
1059 during despooling in SD to blocking. This means that other threads
1060 can work with the device structure, in particular the reservations
1061 system while despooling.
1063 kes Fix return in reservation message queue that missed clearing
1064 the jcr lock (implemented 26Jun07 below).
1065 kes Rename a number of dev methods to make locking function names
1067 kes Document locking in lock.c. Move lock structures to new file
1070 kes Move reservations message lock to lock jcr only this
1072 kes Move main SD locking code into lock.c (new file).
1073 kes Update Win32 build to include lock.c
1077 kes Dirk committed the qwt library code for drawing graphs in bat.
1078 kes Tweak install of qwt so that it is integrated with ./configure.
1080 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1081 out by Eric (my typo).
1082 ebl Fix configure.in to get batch mode enable
1083 kes Return correct string from authenticate.cpp in bat when connecting
1085 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1086 spurious line drops when using TLS.
1087 kes Do not file reparse points when restoring a file that already
1090 kes Implement Windows reparse points -- similar to directories, but
1091 we do not descend into it. This is a first cut. They seem to
1092 be backed up, but restore is not yet tested.
1093 kes Remove restore_blocking in tls code when shutting a socket to leave
1094 it in blocking mode. Hopefully this will fix the encryption bug
1095 reported by Frank Sweetser.
1096 kes When opening a file for backup, tell the OS that we are going to
1097 read it sequentially -- optimization.
1098 kes Change variable names in authenticate_director() to not conflict
1099 with member names in bat. Caused great confusion with compiler,
1102 kes Queue openssl error messages in case of comm problem.
1103 kes Do shutdown() call if socket terminated.
1104 kes Remove some duplicated code in tls.c
1105 kes Move more of the bsock member variables into private and access
1107 kes Add Frank Sweetser's tls-test to the regression suite.
1109 kes Add Swedish sv.po file
1111 kes Don't print clock skew message in FD if less than 3 seconds diff.
1112 kes Add a bit of VSS info to status client.
1113 kes Implement a first cut of Vista VSS, using Win2003 code.
1115 Release: 2.1.20 beta
1117 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1118 loaded tape but uses first drive).
1119 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1120 This was indeed a Win32 issue.
1122 kes Simplify search of autochanger for in-use Volume.
1123 kes Fix exit condition of check for in-use volume. kes Remove
1124 inappropriate my_postgresql_free_result() in db_close()
1126 kes Fix bad return in FD when encryption signature not found.
1127 Probably caused a crash.
1128 kes Inhibit missing encryption signature error messages for
1129 file types where no signature computed.
1130 kes Correct inverted check on autochanger in reservation system.
1131 kes Tweak debug code in autochanger reservation.
1133 kes Add some additional locking in the cats directory in subroutines
1134 that modify packet variables called from batch insert.
1135 kes Rework how dcrs are allocated. new_dcr() can now be called
1136 with an existing pointer, and it will simply clean it up.
1137 This allows the reservation system to test various different
1138 devices, and will permit easy device changes.
1139 kes A bunch of changes all over to handle new new_dcr() calling
1141 kes Work more on the Volume management in the SD. Remember Volumes
1142 for tape drives and for autochangers (even virtual disk changers).
1143 kes When looking at the Volume list to reserve a drive, handle
1144 autochanger names correctly by interating through the changer
1145 devices. Also call the Director to see if a Volume is suitable
1146 for the current job.
1147 kes Fix some bugs in bscan. Make sure all media records are written.
1148 Make sure that valid JobMedia records are written for disk files.
1149 Previously they were completely wrong.
1150 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1151 that the URLs don't change and so that the developers will all
1152 work off the same copy. Rebuild from scrach.
1153 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1155 Release: 2.1.18 beta
1157 kes Fix seg fault in FD from incorrect digest size.
1158 kes Fix argument to non-OpenSSL crypto.c subroutine.
1160 Release: 2.1.16 beta
1162 kes Remove a few malloc()s from the encryption code.
1163 kes Use the class calls to bsock in filed/backup.c and restore.c in
1164 place of the old bnet_xxx code.
1165 kes Implement code that does an on the fly calculation of the
1166 signing digest during restore of encrypted files. It makes
1167 a best guess at the algorithm, and if it is not correct, will
1168 then revert to the old code which reads the file after it is
1170 kes Implement at least one missing crypto stream in stream_to_ascii()
1171 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1172 #877 where a reload with bad syntax causes Dir to exit.
1174 Cut: 2.1.14 beta (not released)
1176 kes Do not free a volume on a tape drive until another volume is
1177 mounted and read, or the autochanger unloads the volume.
1178 This should help the SD re-use volumes that are already mounted,
1179 and should fix bug #886.
1180 kes Apply patch from user brettedgar that allows gnome2-console include
1181 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1182 kes Apply patch from Lucien Weller that fixes day of week calculation
1183 because of DST flag problem. Fixes bug #887.
1185 kes Move find_next_appendable_volume() to after acquiring a valid device
1186 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1188 kes Unable to reproduce bug 872. However added additional testing for
1190 kes Bug #874 resolved by documenting SQLite limitations.
1191 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1192 kes Bug #881 resolved by removing typo in mtx-changer script.
1193 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1194 approval. Added a link to the wiki on the web page, and implemented
1195 a backup from http://paramount.ind.wpi.edu
1197 kes Fix update allfrompool to pass pool name.
1199 kes Convert to pure GPL v2 license.
1200 kes Fix sscanf problems reported by Peter Buschman that caused
1201 a bus error on Solaris.
1202 kes Rework (simplify) the select prompt in bat.
1203 kes Move get_jobid_from_tid() into lib and create a
1205 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1206 should definitely fix the problem of lost error messages in the
1208 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1209 kes Eliminate tcpd.h from the project. Enclose the #include from the
1210 library with extern C ...
1211 kes Add print of signal name when a signal is trapped.
1213 Release: 2.1.12 beta
1215 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1217 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1218 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1219 makes SQLit3 run 30 times faster, though a bit less safe.
1220 kes Implement --with-batch-insert in configure and detection of thread
1221 safe libraries. It is on by default, but turned off if no thread
1222 safe library (e.g. SQLite 2) is available.
1224 kes Fix Bacula PostgreSQL buffer overruns.
1225 kes Do better checking for NULL results returned from PostgreSQL;
1226 implement retry for failed queries; clear results buffer after
1227 failed query. Hopefully this will correct the PostgreSQL failures.
1229 kes Implement algorithm to handle only one appendable volume with
1230 Prefer Mounted Volumes = no.
1231 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1232 returned from a query.
1233 kes Make volume lock recursive.
1234 kes Implement an additional volume reservation algorithm that
1235 starts by considering all reserved volumes then uses the
1236 old brute force algorithm of searching the resources to
1237 find a suitable device.
1238 kes Add new reservations debug code and refine the old code.
1239 kes Update the win32/dll/bacula.defs file.
1241 kes Tweak reservations algorithm to permit a few more cases, i.e.
1242 volume reserved, but on different drive, ...
1243 kes Enhance SD status to include Pool and Media Type for drive in a
1244 more readable format (a bit longer).
1245 kes Fix PostgreSQL double free.
1247 kes Minor refactoring of restore decryption code.
1248 kes Add code to smartall.c to detect double free of a buffer.
1250 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1251 so that bsmtp will create a correct email address (mailbox only).
1252 kes Modify 'memory' command so that the buffers are listed as 'In use'
1253 to avoid confusion with Orphaned buffers.
1254 kes I reworked the OpenSSL include/lib flags to be handled in
1255 the standard Bacula way, which should fix bug #863 concerning
1256 non-standard OpenSSL libraries.
1258 kes Implement Help Browser window for bat.
1259 kes Fix reload bug that reset StorageId to zero.
1261 kes Fix TLS #ifdefing when TLS turned off.
1262 kes Ensure that when labelling a tape with Slot=0 that InChanger
1264 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1266 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1267 add DISTINCT (required by PostgreSQL).
1268 kes Implement BSOCK authenticate_director() method. Eventually will
1269 authenicate all daemons.
1270 kes Move several more functions into the BSOCK class.
1272 kes Add code to tell the OS that we no longer need a cached
1273 file that we were reading. In findlib/bfile.c. Also,
1274 only cache files that we are reading. Thanks to
1275 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1276 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1277 kes Implement script to automatically generate cats and dll .def
1278 files for Win32 dll.
1279 kes Update README.mingw32 to include new .def file generation.
1280 kes Correct typo in UTF-8 error message as reported by:
1281 jhernandez <julianhernandez@gmail.com>
1282 kes Add additional sm_check() code on debug level 1.
1283 kes Set default debug level to 1.
1284 kes Trap SIGABRT in attempt to get traceback.
1286 kes Reduce bat connect timeout from 30 to 15 seconds.
1287 kes More restructuring and implementing BSOCK class in place of
1289 kes Remove a few unnecessary malloc() tests in crypto code.
1290 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1291 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1292 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1294 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1296 kes Fix Verify InitCatalog. The attributes were not pointing to the
1297 correct saved location.
1298 kes Implement message callback so that GUI is sure to get all
1299 daemon messages. Currently displayed in a dialog in bat.
1300 kes Ignore SIGUSR2 (Bacula timer) in bat.
1301 kes Apply regress patch from bug #859 to allow regress to work
1302 with Solaris compiler.
1304 kes Begin adding TLS support to bat.
1305 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1306 clean up lex.c and make it more readable.
1308 kes Move more bnet functions into the BSOCK class.
1309 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1310 kes Complete change of berrno strerror() method to bstrerror()
1312 Release: 2.1.10 beta
1314 kes Cleanup incorrect email addresses in bsmtp.
1315 kes Make bat display initial messages rather than discard them.
1317 kes First cut of adding .mod to the run command.
1318 kes Implement auto display of messages in bat.
1319 kes Enhanced preferences to allow all Bacula output to be
1322 kes Try to make bsmtp date routines more generic.
1323 kes Fixed bug #856 autochanger documentation.
1324 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1325 kes Add new cats entry point so Win32 builds.
1327 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1329 kes Do better checking for the MySQL 64 bit libraries looking for both
1330 .a and .so libraries.
1331 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1332 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1333 kes Require the thread safe version of MySQL during configure. Thanks
1334 to Andre Noll for pointing this out.
1335 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1336 continuing in migration code.
1337 kes Apply implementation of tray-monitor font derived from gnome-console
1338 submitted by Andreas Piesk <a.piesk@gmx.net>
1340 kes Eliminate important memory loss in SQLite
1341 kes Fixed the batch insert MySQL thread specific data that was not
1342 being freed. See cats/mysql.c:db_thread_cleanup().
1343 kes Fix restore before command.
1344 kes Convert old hdr.name to name() in a few places.
1345 kes Implement update jobid command.
1346 kes Return all time_t dates in db_get_job_record()
1347 kes Stop watchdog in SD earlier.
1348 kes Put Pool just after Storage in please mount message.
1349 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1352 kes Update the po files.
1353 kes Fix Verify InitCatalog by making it cache attributes.
1355 kes Change name bacula-bat to bat for man 1 page to correspond to
1357 kes Check for client and store NULL pointers in status command. This
1359 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1360 kes Fix sign extended editing of %p.
1361 kes Clean out a little old #ifdefing in cats/mysql.c
1363 kes If time diff between DIR and FD is more than 600 seconds convert
1364 INFO message to WARNING.
1365 kes Implement heap size display in status for all daemons.
1366 kes Attempt to fix MySQL db open memory loss (not successfull).
1367 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1368 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1369 Query. This looks like a MySQL but but by doing extra releases,
1370 the memory goes away. This should fix bug #847.
1372 kes When backup fails, cancel SD before waiting for sd termination.
1373 kes If SD is waiting for FD to connect during cancel, wake up the
1375 kes Fix fsf code so that errno is correctly reported.
1376 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1378 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1379 so that Bacula doesn't later stumble into a seg fault.
1380 kes Use the term Restore Client in the restore Job report.
1381 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1382 the original job's FileSetId.
1383 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1384 spooling in migration jobs. Not yet tested.
1385 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1386 reading conf file from a pipe. However, do it with open_bpipe()
1387 rather than popen. Not yet tested.
1389 kes Fix an ugly bug where the VolCatBytes were getting updated
1391 kes Implement bconsole memory command that prints current memory
1392 usage, plus smartalloc dump.
1393 kes Clarify some error messages in backup, admin, and migrate.
1394 kes Shrink label dialog to smaller size.
1395 kes Invert Cancel OK buttons on restore to be OK Cancel.
1396 kes More strerror() to bstrerror() conversions.
1398 kes Start implementing bstrerror() in place of strerror().
1399 kes Stripping path -- seems to work.
1401 kes Prevent door and port files from being restored (mostly
1403 kes Free an unreleased buffer in compat code.
1404 kes Change console Job name from *Console* to -Console- to eliminate
1405 Win32 filename problems. Put Win32 path separator when creating
1406 Console file. This fixes bug #846.
1407 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1409 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1411 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1412 to force Win32 error message.
1414 kes First cut strip path. The data should be passed to the FD,
1415 but nothing is done with it yet.
1416 kes Enhance the digest and signature routines in the crypto
1417 library to accept a JCR and to use it to print error messages
1418 so that they will go in the Job report rather than the daemon's
1420 kes Simplify some of the verify signature code.
1421 kes Simplify a few of the alternative returns in the signature
1424 ebl Use only POSIX regex instead of GNU regex in breg.c for
1425 File relocation. It fix broken freebsd compilation.
1426 kes Convert all other Dir files to use new ua class message
1428 kes Tentative fix for missing digest signature in bug 807.
1429 kes Correct handle problem in new win32_ftruncate routine.
1430 kes Convert ua_purge.c and ua_update.c to use new ua class
1431 message routines for bat.
1433 kes Correct incorrect installation of LICENSE in Win32 installer.
1434 kes Display LICENSE at the beginning of the Win32 install.
1435 kes Attempt to correct the need for the png files to be installed
1437 kes Reapply my bat.conf install script in qt-console. I think I
1438 editted bat.pro instead of bat.pro.in and it was lost.
1439 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1440 the /var/lock/subsys for subsysdir. Also corrects typos in the
1443 kes First cut update job.
1444 kes Correct configure to include qmake of src/qt-console directory.
1446 kes Make restore job yes/mod/no print in one command so GUI works.
1447 kes First cut implementing backup and restore client.
1448 kes Correct editing in Verify output that caused a seg fault.
1450 kes Insure that bat.conf is not overwritten during installation.
1451 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1452 while I was implementing migration in March 2006 !
1454 ebl Cleanup file relocation, using char *RegexWhere instead of
1455 char *where + bool where_use_regexp
1456 kes Update some manpages and add bat manpage.
1457 kes Make a first cut at converting bacula.spec.in for bwx-console
1459 kes Apply patch from John Goerzen to add hostname as fourth argument
1460 to make_catalog_backup script.
1461 kes Fix typos I introduced into bsmtp.c
1462 kes Make pm_strxxx() routines handle input of NULL pointer. This
1463 is to protect from NULL pointers returned from SQL databases.
1464 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1465 kes Add more debug to FIFO code -- fix fifo regression test.
1467 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1468 kes Add thread timer to bnet_connect() to break from OS if wait time
1471 kes Update Win32 build to include new files, new symbols, and
1473 kes Implement socket level heartbeat (tcp_keepidle)
1474 ebl Commit File relocation patch
1475 kes Make bat have 'make install' target.
1476 kes Warn during install if old gnome-console binary found.
1477 kes Warn during install if old wx-console binary found.
1478 kes Add -8 option to bsmtp command line to add content type utf-8.
1479 Fixes bug #809. (Character coding problem in bsmtp).
1480 kes If < is found in target (from, to, cc) then do not enclose the
1481 target in < > in bsmtp. Fixes bug #772 (malformed address).
1482 kes When printing certain items in dbcheck, stop after 300000.
1483 Fixes bug #822. (dbcheck loops).
1484 kes Incorrect status in Dir after waiting for mount with poll set.
1487 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1489 kes Print waiting to reserve a device every 5 mins.
1491 kes Don't call close_part in label.c if tape and relabel.
1492 kes Don't free volume if busy in close() -- should help with
1494 ebl Fix #824 RunScript bug (After script could be execute twice)
1495 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1496 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1497 Add a regression script to test RunScript
1499 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1502 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1503 deprecated. No additional bugs will be fixed, and they will be dropped
1504 in a future release (probably 2.4.0).
1505 kes Change name of wx-console to bwx-console to make it more Bacula
1507 kes Change the name of gnome-console to bgnome-console to make it
1510 kes Some time in March, a Feature Request with patch from Jorj Bauer
1511 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1513 The ability for the director to validate a Client (FD) CN against
1514 an arbitrary set of patterns rather than the hostname, with
1515 A new 'TLS Allowed CN' set of directives which are implemented
1516 in the Client resource. Then pattern matching is used in place
1517 of hostname matching against the Certificate's CN. As an example, we
1518 have certificates which (a) use a local CA, and (b) have a CN of the
1520 kes Add new/changed entry points to Win32 build
1521 kes Create unaccepted-projects for projects that are not accepted.
1522 kes Simplify locking in the reservations system.
1523 kes Add more debug code in reservations.
1524 kes Make sure error condition on reserving a volume is handled correctly.
1525 kes Correct handling of volume_in_use.
1526 kes Correct handling of initializing a device.
1527 kes Move handling of broadcasting releasing a device into release_device().
1528 kes Correct attaching dcr to dev so that it is only done if device
1529 is properly initiated.
1531 kes Locking debug level tweaks in SD.
1532 kes Tweak new Volume code.
1534 kes Add exec external-command [wait-seconds] to bconsole. This
1535 executes the external-command. Note! normally external-command
1536 should be enclosed in double quotes.
1537 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1538 it should normally be off in a production system.
1540 kes Implement die command for SD so that we can force it to dump.
1541 kes Implement SD lock debug code.
1542 kes Implement new algorithm for keeping Volume list in SD. It
1543 is now owned by the device.
1545 kes Implement new code for freeing in use volumes that should
1546 resolve if not all, some of the problems of multiple drive
1547 tape conflicts described in bug 801.
1549 kes Fix gui/bacula-web/images files in svn.
1550 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1552 ebl Fix a bug in batch mode (in string escape)
1553 kes Correct migration prune SQL typo that crept in in a
1554 recent 2.1.x change.
1556 kes Move bnet_despool() into class in bsock.c
1557 kes Modify job report to include director name and Build OS.
1558 kes Move drop root privilege and check_catalog() before fork.
1559 kes Add update database scripts (version 9 to 10) to updatedb directory.
1561 ebl Check size and age of each file after its backup to see if
1562 it has changed during backup, if 'checkfilechanges' is set.
1563 The FD will do an extra check (stat(2)) after
1564 each file backup. mtime, ctime and size are compared with
1565 'before backup' information. If time or size mismatch, an
1566 error message will be generated. You must upgrade FD to use it.
1568 kes Make database name and user configurable
1569 --with-db-name=xxx --with-db-user=xxx
1570 kes Add back database type to message.c for debugging.
1572 kes Implement dir_sql() which issues an SQL query.
1573 kes Modify bat medialist to use dir_sql() and do some minor C++
1574 formatting as well as eliminating a number of pointers, simplifing
1577 kes Fix some of the mtx-changer grep commands for tape label readers.
1578 kes Convert a number of bsendmsg into the appropriate send/warning/error
1579 message class calls.
1580 kes Suppress the using database message in the .sql command.
1581 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1583 kes Add context menu for floating a window.
1584 kes Some minor cleanup and name changes in qt-console
1585 kes Add doing mt setblk 0 in Win32 mtx-changer.
1586 kes Apply Martin's bug fix to move definition of ENODATA for
1588 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1589 sqlite2 and sqlite3.
1591 kes More pruning cleanup.
1592 kes Turn on wait_for_drive by default in mtx-changer.
1593 kes Turn on Batch insert code by default as it now passes regression.
1594 kes Add ./configure --enable-bat to enable building of Bat.
1595 No install yet though.
1597 kes Implement a new .sql command for bat.
1598 kes Implement code to turn off pruning in obtaining the next volume.
1599 Pruning is turned off for the status dir command, but turned on
1600 for SD requests and for the list nextvolume command.
1602 kes Correct Qmsg() that was not updated correctly when committing a
1603 previous change (probably the recent TLS patch).
1605 kes Write new subroutine is_volume_purged() that explicitly checks
1606 if the Volume is purged, and if so marks it as such. This should
1607 resolve problems reported about needing to mount twice to recycle
1609 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1610 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1611 amount of duplicated code.
1612 kes Do volume pruning only for the Media Type desired (reduces pruning time
1613 if multiple Media Types are in the same pool).
1614 kes Implement more detailed info in the Job report for the Bacula version
1616 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1618 ebl Add bbatch tool to bench database and insert mode.
1619 Fix sql quote stuff in batch mode
1620 Fix sql stuff for mysql
1622 kes Correct problems with am/pm scheduling. Fixes bug #808.
1623 kes Implement new prunning code that prunes up to 1000 jobs at
1624 the same time. The same technique can be applied to a number
1625 of other prune/purge subroutines.
1626 kes Add an insanity check when starting a new tape job to ensure
1627 that the tape position has not been changed. If so fail the
1629 kes Fix Win32 build for dlls to add the folllowing:
1630 src/lib/bsock.c -- new file with new entry points
1631 src/lib/dlist.c -- new entry points
1632 src/cats/sql_create.c -- new entry point
1633 src/cats/sql_cmds.c -- new DATA item exported
1635 ebl batch mode cleanup bscan-test is ok now.
1636 kes Implement SD code to check length of disk volume before appending.
1638 kes Correct return status on db_batch... routines.
1639 kes Add call to db_write_batch_file_records() to migration code.
1640 ebl Fix AfterJob timing
1641 kes Move the checking of the database in initializion of the Director
1642 to after we drop privileges. This avoids the need for both root
1643 and bacula access to the DB.
1644 kes Correct a misplaced variable definition in src/filed/backup.c
1645 kes Correct how the new batch insert db_create_attributes_record()
1646 uses the arguments. Caused a seg fault in bscan.
1647 kes Implement lock() and unlock() methods in DEVICE class.
1648 Implement block() and set_block(xx) methods in DEVICE class.
1649 kes Modify bnet_connect() so that it uses time() to check for the
1650 wait time expiring (on some OSes, some system calls may not
1651 return immediately).
1652 kes Modify Verify to obtain the previous JobId when it is actually
1653 running rather than at schedule time (as it was in 1.38.x).
1654 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1656 kes When checking pid in pid file, continue running if the pid is
1657 the same as ours. This occurs on IRIX after a system crash.
1660 kes Extend new GUI API.
1661 kes Make the ua structure a class, and implement send_msg(),
1662 error_msg(), warning_msg(), and info_msg().
1664 kes Apply fix from for building wx-console on the Mac from
1666 kes Implement new select mechanism for GUI programs.
1667 kes Reorganize initialization of stackedWidgets in bat.
1669 kes Add updated nagios plugin supplied by Christian Masopust.
1671 kes More bat implementation.
1672 kes File migrate bug with Pool Occupancy using mediaid instead
1673 of jobids. Fixes bug #795.
1674 kes Fix orphaned buffers in filed backup and verify due to
1675 crypto buffers not freed during errors. Fixes bug #789.
1676 kes Extend new GUI api code to tree commands.
1677 kes Ensure that tree and dot commands check console ACLs.
1678 kes Permit marking directory with trailing slash.
1679 kes Allow 20 console connections (instead of only 10).
1681 kes Add smartctl call to bacula-sd.conf as an example of getting
1684 kes Modify jobq.c to let simultaneous restore jobs run. This may
1685 cause them to fail if they cannot get a drive.
1686 kes Add Client Connect Wait to Storage daemon to permit users to
1687 modify the time the SD waits for a FD connection.
1689 kes Correct virtual changer check which was backwards. This caused
1690 volumes to be unloaded into slots already occupied.
1692 kes Apply Command ACL filter to JobId list in restore command.
1693 kes Correct typeo in var.c patch.
1695 kes Don't let Bacula prune File or Job records for the current Job.
1696 kes Fix variable substitution pad + inc bug reported (with patch)
1699 kes Correct SQLite log table index as reported by Luca Berra.
1701 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1703 kes Begin implementing new comm signals for API.
1704 kes Fix a few places in lib/message.c where the open fd may
1706 kes Continue implementing lib/bsock.c (real class). Make jcr,
1707 who, host, and port private. There are new methods to access
1708 them for non-class use. This required touching a number of files.
1710 kes Add LANG=C to autoconf/randpass so it works with languages other
1711 than English. Fixes bug #788.
1713 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1715 You will not be able to generate Include/Exclude list any more.
1716 It will be fixed soon.
1717 If you want to use this, you can apply
1718 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1720 kes Restore of sockets created false error messages because Bacula
1721 no longer restores sockets, but the code was still trying to
1722 set the attributes on a non-existent file. Reported by a user.
1723 ebl finish RecyclePool feature
1724 Media will takes Pool.RecyclePool
1725 when moving from Scratch to a Pool or when user will do
1726 update volume=xxx frompool
1727 To use it, add RecyclePool = aPool to your Pool resource
1730 RecyclePool = Scratch
1734 kes Expand new BSOCK class adding signal() and new BNET signals.
1735 kes Begin enhancing the dot commands adding a new API function
1736 that returns more information and will make it easier
1737 to interface to the Director from a program.
1739 kes Make DEVICE fd private. Its new name is m_fd, and can be
1740 obtained with dev->fd() outside the class. This is the
1741 first of many DEVICE members to be made private.
1742 kes Implement Michael Renner's idea on having a virtual disk
1743 changer. I made some minor modifications (e.g. I did not
1744 implement the Virtual Changer directive, but simply set
1745 the Changer Command to an empty string.
1747 kes Implement a BSOCK send() method that writes the whole record
1748 in a single write() request rather than in two.
1749 ebl add update volume=xxx recyclepool=yyyy
1750 volume takes recyclepool from pool when using update volume=xxx from pool
1752 kes Fix encryption deblocking bug, which caused some restored files
1753 to be truncated. This fixes bug #763.
1754 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1755 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1757 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1758 ebl Use btime_t instead of uint64_t in media patch.
1760 kes Optimize the use of the database a bit in the Status dir command.
1761 Only open it when needed, ensure that if any previous database
1762 was opened, it is closed.
1764 kes Correct VolCatBytes bug from media patch.
1765 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1766 in the case of orphaned records.
1767 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1768 and File records in 300K chunks to be more efficient. This
1769 idea came from Juan Luis Frances (if I remember right).
1770 kes Apply Eric's scratch patch that moves a purged Volume to
1771 the RecyclePool. Question: how is RecyclePool set? what
1772 happens to the ScratchPool?
1773 kes Apply Eric's media patch that collects read/write media
1774 times as well as byte counts. This patch requires a
1775 simultaneous upgrade of the DIR and SD. Note, there
1776 should be some way to turn off timing. I'm not sure
1777 times are in Bacula units.
1778 kes Apply Eric's batch-insert patch.
1780 kes Update projects list.
1782 kes Implement Include/Exclude file lists in FD as dlists using
1783 the new dlistString class. This permits efficiently having
1784 large include/exclude lists and completes project Item 25.
1785 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1786 console is authorized to cancel the job. This fixes bug
1788 kes Modify SD so that the VolCatJobs medium record is updated
1789 at the beginning of a Job rather than the end. This
1790 fixes bug #775 where exceeding MaxVolJobs caused jobs
1792 kes Added a mutex around getting and setting Volume information
1793 so that multiple simultaneous jobs will single thread.
1795 Switch to using Subversion
1796 kes Remove src/pygtk-console/ from configure
1798 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1799 plus the entrypoints.
1800 kes Apply patch supplied that corrects debug print
1801 in canceling jobs for max run time. Supplied as
1802 part of bug #621, which was previously fixed.
1804 kes Test on job_canceled() and sd_msg_thread_done inside
1805 loop starting the message thread to avoid a race condition.
1807 kes Remove rl_catch_signal from console.c as it conflicted
1808 with the header definition. Fixes bug #765.
1809 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1811 kes Clarify some stored/acquire messages to indicate if the
1812 problem is with read or append.
1814 kes Fix memory leak with storage ids in cats/sql_get.c
1815 kes Terminate watchdog earlier to avoid reference to released
1816 memory -- reported by Jason Austin.
1817 kes Move closing the database from jobq.c to the director daemon
1818 termination routine. This fixes memory leaks for shadow jobs
1819 (i.e. migration jobs).
1820 kes Free up the unique jobid chain items in migrate.c. This fixes
1821 a memory leak problem.
1822 kes Convert some ugly looking for statements to use foreach_alist
1823 in findlib/find.c. This will facilitate converting the structures
1824 to use dlist (for large include/exclude lists).
1825 kes Fix a bug in the btree.c and btree.h routines, then rename them
1826 rblist and add them to be built in src/lib. Include some new
1827 methods written by Rudolf Cejka that make the code more readable
1828 (hides some of the ugly casting).
1829 kes Add set_next() and set_prev() methods which make the code much more
1830 readable. Also add a new dlistString class that facilitates storing
1831 strings in dlists. To be used in the large include/exclude lists.
1832 kes Make some trivial modifications to lib/tree.h that use rblist
1833 rather than dlist for storing the tree links. This was suggested
1834 by Rudolf Cejka. The result of this is that the restore tree now
1835 uses red-black binary trees rather than simple linked lists. This
1836 should give rather dramatic speed improvements for directories
1837 contining large numbers of directories/files (more than 10000).
1839 kes Fix maxruntime bug #621.
1841 ebl Implement the include JobID in spool file name project.
1842 kes Reorder projects file in order determined by Jan 2007 vote.
1843 kes Implement item #12 on project list -- quick release of FD by
1845 kes Fix open of SQLite3 db where user does not have write permission
1846 so that DIR does not crash. Fixes bug #761.
1848 kes Add back missing @ in Win32 Makefile.
1849 kes Change 'Device not configured to autolabel' from INFO
1851 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1852 which should restart an indefinite # of times.
1853 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1854 other DIR specifications.
1856 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1857 Fix path quoting in SQLite scripts.
1858 Fix problems with SHGetFolderPath.
1860 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1862 kes Fix Job restart on error bug that promotes an Inc to a Full
1863 backup. This should fix bug #755.
1864 kes Add qt-console and first cut of code.
1868 kes Fix Bacula->Documentation link on Win32 to point to index.html
1869 instead of bacula.html. Fixed bug #750.
1870 kes Return JobId in db_get_job_record() when JobId==0. This should
1872 kes Do not release source pointers when restarting a failed job.
1874 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1875 This *should* fix bug #747.
1876 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1879 kes Modify USTORE constructor to set an empty store_source string,
1880 and don't copy the store_source string in a cancel. Hopefully
1881 this will fix Arno's seg fault, bug #744.
1882 kes Add back code to disable conio in configure. Fixes bug #743.
1883 kes Correct the Options scanner in the FD to correctly handle
1884 SHA1 option, which was eating the next option. Reported by
1886 kes Add code to indicate when the SD is spooling, spool wait, and
1887 despooling as requested by Alan Brown.
1889 Version 2.0.0 released: 4 January 2007