1 Technical notes on version 2.5
6 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
7 examples/database/dbcheck.sql
10 dbdriver in bacula-dir.conf
12 enhancement to wait command: wait mount ...
17 remove reader/writer in FOPTS????
21 kes Add malloc and free Bacula entry points for plugins. Increment
22 FD plugin interface version. Create a bacula plugin context
23 structure to keep track of whether or not the plugin is disabled.
24 kes Apply FileIndex fix for plugin name stream suggested by James.
25 kes List plugins in FD status report when debug > 0.
27 ebl Add a new VerId variable that is printed in version command.
28 kes Fix migration SQL not to migrate a job that has not terminated.
29 This is a partial fix to bug #1164.
30 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
31 backup start time bug reported by Graham Keeling.
33 ebl Fix possible bug in cancel_job() with job that are not
36 kes Fix bat build for Win32.
38 kes Copy plugin link field into ffpkt.
40 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
41 It provides FileRegex in bsr files and code to collect regex
42 from the user during restore, an Allow Mixed Priorities feature,
43 and documentation for the above.
44 ebl Remove db berkeley from configure process
45 kes Do dirty check on hostname (Linux only) and if not resolvable
46 use localhost as default.
47 kes Increase vtape max block to 20GB.
49 kes Refactor restore code to create a close_previous_stream(). This
50 This may destabilize the source.
51 kes Implement planned startRestoreFile() plugin call.
52 ebl Remove missing Loaded information from status slots storage command.
53 ebl Fix Console command problem that cancels the job
54 kes Add more plugin restore debug code.
56 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
57 kes Rewrite plugin restore interface a bit to correspond to how Bacula
58 creates and writes to the restored file.
59 kes Add some DebugMessage() calls to the bpipe-fd.c program.
61 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
62 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
63 Bat; allow add and delete in place of mark and unmark.
64 kes Another attempt to fix the endRestoreFile plugin bug noted below.
66 kes Apply dbi driver patch from Joao.
67 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
68 Bastien Friedrich reported the bug.
69 kes Create plugin instance only when FD job starts.
70 kes Add new FD plugin event: bEventCancelCommand when
71 a cancel command is issued to the FD.
73 kes Add cmd_plugin flag to jcr so we can globally know if a
74 command plugin is running.
75 kes If command plugin running, do not attempt (for the moment)
76 to get Win32 extended attributes.
77 kes Ensure that proper Win32 flags are set in bfile packet
78 if plugin_bopen() works on Win32.
79 kes Remove generated src/plugins/fd/Makefile
81 kes Implement build and install of bpipe-fd.so plugin.
82 kes Rework the interface that passes packets to the plugin
83 so that the packet is started and ended by the packet size.
84 This allows the driver to do a sanity check.
86 kes Rework the pluginIO Bacula internal code to enable
87 proper handling of Win32 error codes from GetLastError.
88 kes Apply Joao's patch to regress startover_libdbi.
90 ebl Add -B option to dbcheck to get catalog information
91 kes Fix Win32 build to include new library function.
92 kes Remove some old reader/writer code.
93 kes Implement ./configure --with-plugindir=xxx
94 ebl Fix the mysql bug in the new accurate code
95 kes Improve plugin debug. Create plugin test.
96 kes Set main thread specific data to INVALID because it
97 has no jcr. This allows debug output to work correctly.
98 kes Add src/plugins/fd/Makefile to ./configure process.
99 kes Make first cut attempt to correct SQL that computes the current
100 Pool usage. This is to fix bug #1159.
101 kes Do a bunch of plugin cleanups for Win32 and more careful checking
102 of PluginDirectory and whether or not a plugin was found.
104 kes This code should fix the race condition that leads to a Director
105 crash at job end time when the job list is updated. This was reported
107 kes Add more plugin documentation and fix include of config.h for
108 Win32 build (I hope).
110 ebl Revert to htable instead of rblist
111 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
112 tree instead of htable.
113 ebl Use a dedicate DB link to compute and send the accurate list
116 kes Fix compile errors in filed/fd_plugin.c.
118 kes Remove all double quotes from SQLite creating script and
119 replace by single quotes as suggested by John Huttley.
121 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
122 It significantly improves the performance of dbcheck for
124 kes Fix bad debug code call in src/filed/accurate.c
126 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
127 output. Perhaps we really need to implement M_SAVED.
129 kes Fix bug #1156 FD crash during processing of Accurate data.
130 kes Tweaks to htable code to improved debugging and make names
131 a bit more meaningful.
133 ebl Remove time_t from update_stats()
135 kes Modify the license of the example plugin program to allow
136 it to be used by anyone for making a Bacula plugin.
137 kes Make apply_rp_codes() in bpipe-fd.c be static.
139 kes Remove Encryption and Accurate lines in vbackup output -- not used.
140 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
141 kes Add host name to items printed during dump.
142 kes Make Check File Changes default on.
144 kes Set the default FD timeout to 3 minutes (previously 30).
145 kes Apply Bastian Friedrich's weird spelling correction patch.
147 kes Always print Verify hash differences. Rename variable to make the
148 code slightly more readable.
150 kes Correct tests for MaxFullInterval as reported by
151 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
152 kes Fix MaxDiffInterval code as well.
153 kes Enable Win32 plugin load code in lib.
154 kes Make Verify code that computes disk checksums use the same
155 algorithm as backup when dealing with sparse files.
156 kes Attempt to run VSS on any systems newer than Vista -- should
157 make it work on Windows Server 2008.
158 ebl Change the new statistic implementation. Remove the UseStatistic
159 directive and add a 'update stats [days=...]' command. You can
160 now decide when copy job records from Job table to JobStat.
161 Statistics are much more accurate with this.
163 kes Fix SQL case problem that may cause the failure of DiskToCatalog
165 kes First cut adding SD plugins.
167 kes Add Slot if it is non-zero to writing bsr file after a
169 kes Change a number of bnet_fsend() into class method calls.
170 kes Begin audit of diff of 2.4 branch to trunk code.
172 ebl Fix the mysql creation script that double-created an
173 index of the same field on the Media table.
174 Add an index to on VolumeName to the Media table for mysql.
176 kes Another try at fixing Vbackup. It looks much better this time.
177 Disable file index sanity check in FD with value stored in
178 attributes record because with Vbackup the File Index gets
179 changed, but not the attributes record.
180 Enhance some debug code.
181 Fix handling of re-indexing records that are copied in Vbackup.
183 kes Made level_to_str() know about Virtual backup.
184 kes Set correct Virtual backup write pool.
185 kes Fix compile warning in new dbcheck port code.
186 kes Fix migration code broken by previous virtual backup fix.
188 kes Fix problem of Virtual backup not writing a sequential FileIndex.
189 kes Reset Virtual backup time/date to the value from the last backup.
190 kes Ensure that storage name is passed to SD on read.
191 kes Correct a problem with Level and Virtual backup, rework how
192 bsrs are printed in debug to use standard routine.
193 kes Apply patch from Chris in bug #1133 that provides alternate db port
195 ebl Remove catalog dependency from bcopy tool.
196 ebl Modify catalog scripts to have an easier packaging integration,
197 using default variables.
198 Make difference between SQLite3 and SQLite in db_get_type()
200 kes Apply most of changes in a patch from:
201 Michael Stapelberg <michael+bacula@stapelberg.de>
202 that allow the Bacula FD to compile on IRIX 6.5.
204 kes Apply patch from Bastian Friedrich that accepts a yes on a
205 delete volume command line.
206 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
207 job when reading from one autochanger and writing to another.
208 kes Minor tweaks (copyright dates convert to use method instead of bnet).
210 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
211 drives when no tape is mounted.
213 kes Add additional info to some SD messages.
214 kes Add fix supplied by Martin Simmons for turning off EOL character
215 in new console multi-command code.
217 kes Fix a Verify InitCatalog problem where in certain cases
218 a garbage filename may be entered in the verification database. This
221 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
222 sent in by Riyas Yoosuf.
224 kes Fix seg fault in Dir during estimate command with no level value
225 given. This fixes bug #1140.
227 kes Add message to migration job when the target job is already migrated.
228 This closes bug #1129.
231 kes Raise some restore debug levels.
232 kes Replace off_t by boffset_t where ever I found it.
234 kes Define a machine dependent ioctl request type for use with
237 kes When a migration job actually runs, re-check the Job record
238 and skip if the job is already migrated. This should
239 significantly reduce the problems with bug #1129.
241 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
242 turn off glibc checks that prevent getting good dumps.
243 kes Implement console 'wait mount' command. Doesn't yet work.
244 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
245 kes Break the do_swapping into do_unload, do_swapping, and
246 do_load. It is much more logical that way.
247 kes Implement a set_dcr_from_vol subroutine in acquire.c for
248 reading volumes. This allows the dcr to be refreshed after being
249 zapped when the wrong volume is mounted.
250 This should fix bug #1126 -- During multiple tape restore, bacula
251 does not ask for physical tape change, but rereads same tape
253 kes Apply patch submitted for bug #1107 with a small modification.
254 This fixes a bug where bcopy copied too many records.
255 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
256 This fixes bug #1124.
257 kes Make the default bat restore Pool be Any. This fixes bug #1118.
259 kes Remove debug statement that crashes the SD at the end of
260 a tape during restore. Fixes bug #1125.
262 kes Implement Win32 bat changes made to Branch-2.4
264 kes Tweak separator command in console to start disabled and
265 allow defining no separator character. Also make code a
266 bit more fault tolerant.
267 kes Make btraceback write the traceback to the working directory
268 before attempting to mail it.
269 kes Add a RFC to Projects.
271 kes Attempt to implement a kludge to make Qt work with bat
273 kes Setup rstorage correctly. Virtual backups are working.
275 kes Move setting JobLevel and JobType into a method, which should
276 allow completing Virtual Backups.
277 kes Fix verify jobs to work again.
279 kes Virtual Backup tweaks -- it is close to working.
281 kes Ensure that SD tried to mount a volume not in an autochanger
282 at least once before asking for operator intervention.
283 kes Make SD aware of Virtual Backup jobs.
284 kes Add VirtualFull for bat.
285 kes Changes to get read storage correct for Virtual Backup.
287 kes Remove old code from label.c
288 kes Split display_display_info() out of write_bsr_file()
289 kes do_vbackup_init() working -- i.e. bootstrap file built.
290 kes Change Bacula trademark owner from John Walker to Kern Sibbald
291 kes First non-working cut of vbackup
292 kes Correct FD heartbeat code to use volatile variable accessed by
294 kes Zero thread id with memset if on Win32 in case it is a struct.
295 kes If cannot create JobMedia record, continue to try to write eof
296 and clean up in block.c
298 kes Add code to interface OpenSSL to new Win32 pthreads code which
299 used a structure for thread_t.
301 ebl tweak bat for win32 compilation
303 ebl Remove tokyo cabinet from the source
304 ebl Update configure/autoconf to support berkeley DB
305 ebl Add a sort to db_get_file_list() to improve bsr construction time.
307 kes Add a mtx-changer.conf file that is not overwritten during
308 an upgrade. It fully configures the mtx-changer script.
309 kes Clear in-use bit on vol when unused while swapping.
311 kes Remove sleep at end of ./bacula
312 kes Clear hash packet for hardlinked files correctly. This corrects
313 a long standing bug where hardlinked files selected individually
314 would occasionally not be restored.
316 kes Apply Eric's patch to ensure that autoprune does not return
317 a Volume not in the autochanger unless requested to do so.
318 kes Correct bat restore display of multiple drives. This fixes
320 kes Do find_a_volume() each time an unload is done. This
321 fixes the failure of maxvol2-test.
323 kes Add some SD debug code.
324 kes Do find_a_volume() each time an unload is done.
325 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
326 and adds --with-db-port to ./configure.
327 kes Use Qmsg() in job.c watchdog callback.
329 kes Release main control rwlock if ABORTing.
330 kes Make watchdog connect timeout queue messages rather than sending
331 directly to avoid lock conflicts with the real thread.
332 kes Add const char in dbd.c to avoid compiler warnings.
333 kes Fix python compiler string warning. Note, IMO the GNU C++
334 compiler guys have made a *very* bad change to their compiler.
335 They now force all strings to be 'const' unless you explicitly
336 cast them, which is extremely ugly and ruins nice code as well
337 as creates a lot of useless work.
339 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
340 mt. This fixes bug #1116.
341 kes Add const in python files to reduce compiler warnings.
342 This may have to be backed out because of later compiler
344 kes Fix failure of 2drive-concurrent-test. Always read label;
345 clear_unload() only after drive is defined in acquire_for_read().
347 kes Generally clean up the manual tape loading code. The main
348 conceptual change is that when a volume is marked to be unloaded,
349 its volume name is retained, and it is only marked as unloaded
350 when either the autoloader says it is unloaded or another tape
351 is read on that drive.
353 kes Add debug code and refactor subroutine in stored/mount.c
354 kes Fix format problem in bscan output reported in bug #1105.
355 ebl Fix get_next_volume_for_append logic with autochanger
356 - use pruned volumes if found
357 - don't reset the inchanger flag after getting a recycled volume
359 Fix recycle_oldest_purged_volume to take InChanger flag in account
361 ebl Add mmap/unmmap implementation for tokyodbm under win32
363 kes Make first step toward eliminating globals from config
364 scanning. Also should be a workaround for FORTIFY_SOURCE
365 GNU C bug -- fixes bug #1042.
367 kes Apply duplicate job tests to restarted jobs.
368 kes Copy more data when restarting a job so that run
369 overrides are kept. This should fix bug #1094.
371 kes More word alignment cleanup.
372 kes Fix bug where SD did not ask operator if the device could not
373 be opened. Reported by Eric.
375 kes Add dbuser to DIR conf file (replaces user).
376 kes Add --with-db-password to ./configure
377 kes Fix regress to handle db_password.
378 ebl Add new 'status storage slots' that list autochanger
380 ebl Update vtape driver to compile only under Linux.
381 ebl Fix a bug when restoring with a wrong mediatype.
383 kes Eliminate ints from conf files and structures to avoid
384 word alignment problems
386 kes Fix bug reported by Scott Barninger where the bacula script
387 refers to scripts in the wrong directory. Needed to meet the
388 requirements of recent FHS location changes.
389 ebl Disable vtape for FreeBSD.
391 ebl Modify disk-changer to check if slot contains something before
394 ebl Fix vtape on win32 and debian.
395 ebl Fix autoselect patch (cause segfault).
397 ebl Fix autoselect option broken for a while. Fix #1089. Need some
398 work with StorageId to be able to use a particular drive in a
401 ebl Rename vtape to vtape.
402 ebl Update vtape driver.
404 ebl Modify vtape driver to avoid sparse file.
405 kes Add make clean of qt-source directory during ./configure
406 kes Store last block number written to tape in DEVICE and
407 use it for testing for correct last block on EOT.
409 Release Version 2.4.0:
413 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
414 This fixes bug #1095.
416 kes Add create_postgresql_database.sql to Win32 installer. Should
417 fix problem reported by Juilio Monteiro.
418 kes Get correct slot when auto unloading a device. This fixes bug
421 kes Fix multiple media restore.
422 kes Make DEVICE Slot private and access it via a method.
423 Allows better control over when it is set and cleared.
424 kes Fix possible seg fault if SQL error.
426 kes Add Martin's fixes to argument scanning for the estimate
427 command. This fixes bug #1093.
428 kes Add debug code to SD.
429 kes Fix renaming a Volume, which used the wrong Volume name.
431 kes If operator has rewind tape, print warning, release tape and
432 try once more. If tape is positioned somewhere, something went
433 wrong, so mark the tape in error and try once more. Previously
434 this error was fatal, now it produces an error message.
435 kes Ensure correct volume name displayed during restore
436 kes Ensure that Volume is mounted for restore.
438 kes Fix a few more Coverity reported problems.
440 kes Apply Allan Black's status dir job count patch.
441 ebl Add information about IMPORT/EXPORT slots in mtx-script.
442 kes Enhance a couple of SD debug messages.
443 kes Tweak unload flag setting and ensure it is set during swap.
445 ebl Fix #1091 about bad output in estimate command.
447 kes Modify autochanger locking to attempt to avoid race
449 kes Make sure device not busy before doing label command.
450 kes Display open() errors except when polling. Previously too
451 many were suppressed. This should fix bug #1070.
452 kes Fix Win32 reparse points. Bacula will not recurse into any
453 reparse point directory, including mount points, unless the
454 directory is explicitly mentioned at the top level (same as
455 with Unix). A file that is linked to another file will be
456 backed up -- much as Unix does for hardlinked files.
457 This fixes bug #1041.
459 kes Remove double quotes from ChangeLog and ReleaseNotes
460 kes Remove StorageId test when pruning and recycling (Eric's changes).
461 kes Remove old form of locking when getting volumes -- causes deadlock.
462 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
463 the name unique and to eliminate compile time error.
464 kes Add accurate.o to Win32 FD Makefile
466 kes Fix cats dll build on Win32 after db_update_job_end_record
467 calling sequence change.
468 ebl Switch to tokyo dbm instead of htable in accurate code
469 ebl Include tokyo dbm to bacula source tree
471 kes Fix buffer overruns detected by Coverity.
473 kes Tweak joblog display.
475 kes Implement --without-qwt
476 kes Fix layout of restore tree dialog
477 kes Add configure bat QWT libraries, so that bat can be built
478 with or without the QWT libaries.
480 ebl Add dummy tape driver for regression tests.
481 kes Make sure we unload the right slot when swapping.
483 kes Add debug times, reduce size of two-pool-changer test
485 ebl Tweak autoconf scripts for vtape
487 kes Improve SD reserve debug code.
488 kes Testing an improvement to free up volumes no longer in use.
490 kes Rework SD acquire for read to handle autochanger Volume
492 kes Implement regression that explicitly tests swapping a Volume
493 from one drive to another.
494 kes Enhance disk-changer to detect most error conditions.
495 kes Fix SD code so that it properly swaps a Volume between drives.
496 This fixes bug #1083.
498 kes Apply libdbi patch from Joao Freitas for regress and for
499 Bacula trunk. Regress now works with libdbi. Nice.
500 kes Apply .nobackup patch from bug #1077 submitted by
502 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
503 name into jobs cloned via the run directive.
505 kes Prevent a Volume that is being swapped from being freed from
506 the volume list. This will most likely fix, at least partially,
508 kes Fix strippath so that it does not get a buffer overrun and crash FD.
509 This fixes bug #1078.
510 kes Remove 50 millisec wait in SD that broke debugger.
511 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
512 that a job may run, counted from when the job was scheduled.
513 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
514 a job may block waiting for a resource, counted from when the job starts
515 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
516 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
517 that implements multiple commands per line in the console when using
518 readline. Modify the default to use a semicolon as the command separator.
520 ebl Fix SQL query in migration code.
521 ebl Make accurate mode with hash disk pass regression tests
523 ebl Implement first cut of accurate backup with hash disk.
525 kes Force unload of volume when wrong volume mounted in SD.
527 kes Fix bat seg fault at termination.
528 kes Add Bacula generated version to bat about box.
531 kes Experiment with allowing multiple read jobs.
532 kes Move final volume swapping code to DCR method and
533 call it from acquire_for_read().
534 kes When wrong volume is mounted during read, unload_autochanger.
536 kes Integrate the libdbi changes from Joao Henrique Freitas
538 kes Stop searching for Volumes in SD askdir if DIR returns the
539 same volume name twice in a row.
540 kes Close bat console windows first to eliminate error message
543 kes Tweak the swap Volume from one drive to another code so that
544 it now seems to work.
545 kes Resolve several problems with recycling that broke the new
546 code (these problems are in 2.2.9 as well).
547 kes Remove the volume lock when calling the sysop code.
548 kes Don't mark a reserved volume with no writers as unused otherwise
551 kes Rework class structures for VOLRES, DCR, and DEVICE to make
552 the method names a bit more logical, and for more logically
553 handling the responsibilities.
555 kes Remove redundant code in terminating the scheduler that just
556 causes a seg fault in many cases.
557 kes Cleanup releasing a volume and make it a DCR method.
558 kes Improve algorithm for detecting pre-reserved volume and
561 kes Tweak volume swapping code so it works.
562 kes Correct name overloading in mount.c
563 kes Replace released flag in VOLRES with reserved and add access
564 methods for the VOLRES class.
565 kes Prevent volume from being released while being swapped.
566 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
567 plugin that add %w (where) and %r (replace flag) editing to
569 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
571 kes Refactor parts of stored/mount.c
573 ebl Add sanity checks for VolWriteTime and VolReadTime
574 ebl Take care of bad clock changes while computing VolWriteTime
575 and VolReadTime. This should fix or limit #1066
576 kes Correct error string numbers in dird/catreq.c
577 kes Restructure reserving, acquiring, and mounting volumes. Calls to
578 autochanger are deferred for mount.c -- simplifes the code.
580 kes Do not prune any running job. It just fails the job.
581 kes Lock the volumes when changing dev->reserved_device and marking
582 the volume unused otherwise the device can get reserved by
583 another job before the volume is released, thus blocking it.
585 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
586 kes Fix bug #1063, reuse of freed ptr in list nextvol.
587 kes Release regex compile buffer in filed/job.c
588 kes Add proper type of const char in sql_create.c
589 kes Turn off debug in daemon termination routines
590 kes Move free_volume_list() before devices are freed in stored.c
591 kes Fix reference to uninitalized stack variables in bregex.c.
592 This should correct bug #1067.
594 kes Fix possible seg fault in SD when freeing a volume entry.
596 kes Implement unload_dev() before swap device.
597 ebl Add statistics prunning with option and menu
598 kes Separate unload_dev() from unload_other_device() in autochanger.c
600 kes Apply patch from bug #1069 that corrects spurious error messages
601 when ACLs enabled on SGI but no ACL exists.
602 ebl Fix small segfault in bacula-sd when debug level is 500
603 kes Modify run_program() and run_program_full_output() to use
604 call by reference for the results string. This corrects a long
605 standing problem where the address of the string may be changed
606 in the subroutine but not in the calling program.
608 kes Re-enable code to remember last volume mounted on a non-tape
610 kes Add patch supplied in bug #1068 that fixes a SD crash when using
611 a Virtual autochanger.
612 kes Generate correct JobMedia records during spooling/despooling when
613 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
614 <tih@hamartun.priv.no> for excellent analysis and testing.
616 kes Tweak hash algorithm for htable using Martin Simmons idea
617 for doing a circular shift.
618 kes Remember what volume is in VTLs (previously turned off for
620 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
621 pointed out some problems in creating JobMedia records during
622 spooling with concurrent jobs. Fix the problem by updating the
623 start file position before despooling and generate a jobmedia
624 record at the end of despooling.
626 kes Fix handling of JobMedia records during spooling and when a
627 Volume is changed without actually writing data to the Volume.
629 kes Rework certain SD locking based on gdb tracebacks of deadlocks
630 sent by Eric. This code now uses only the volume_lock() rather
631 than the reservations lock when at EOM and acquiring a new
633 kes Ensure only one exit point in several subroutines.
635 kes Implement bsock code to permit locking. Use the new code in Verify
636 in the FD to prevent the heartbeat thread from disrupting the Verify
637 data sent to the Dir.
638 kes Modify SD locking to eliminate locking the reservations system from
639 outside the system. Use the volume lock when getting media data
640 and reserving a new volume at end of media.
641 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
642 when SD starts are not locked into place.
644 kes Fix error compiling runscript code on 64 bit machines.
645 kes Tweak Win32 mount point code.
646 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
647 cleared giving bad file estimate).
648 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
651 kes Keep Schedule run lists in order as suggested by
654 kes Implement autostart scripts for Debian.
655 ebl Implement upgrade catalog scripts.
657 ebl Apply jobstat patch for long term statistics. Have to implement
658 purge stats command and upgrade scripts.
659 kes Fix mtx-changer.in for broken Debian mt program.
661 kes Fix large number of JobMedia records reported by Eric Bollengier.
663 kes Apply doc fix from bug #1062.
664 kes Resolve crash and improper restore wx-console Win32 restore
665 GUI. Fixes bug #1065.
666 kes Update Win32 wxWidgets to latest version.
667 kes Attempt to do correct handling of Win32 mount points. Should
669 kes Fix Win32 FD backup/restore memory leak due to improper termination
670 of BackupRead/Write. This fixes bug# 1038.
672 ebl Reduce memory usage for accurate backup, working only with ctime
673 and mtime. (not all Lstat field)
674 About 40MB for my Linux system (400.000 files)
676 kes Add dcr->reserved_volume flag that allows us to release a volume
677 even if it is not vol->released. This allows maxvol2 to work when
678 Volumes expire and we are already writing to the device (i.e. a
679 volume is pulled out from under us by another job terminating after
680 we reserve the drive).
682 ebl Permit multiple command/console per runscript definition.
683 RunScript { command = /bin/true ; command = /bin/false ... }
684 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
685 (restart an application) just after the VSS snapshot on windows.
686 kes Don't zap dcr values during release_volume() as they might
687 have the next Volume to be mounted.
688 kes Fix AIX prototype.
690 kes Second cut of drive switching during backup.
693 kes Update Win32 version of wxWidgets to most recent version.
694 kes Tweak Copy job details.
695 kes Rework dir_find_next_appendable_volume to make a bit more effort
696 to find a suitable volume before giving up.
698 kes Make ask_sysop_to_create... to return if waken from wait.
699 This helps get out of blocked conditions.
700 kes Experimental implementation of switch_device in reservations.
701 kes Implement FD version to allow easier protocol changes.
702 kes Add Plugin Options string -- not yet passed to FD.
703 kes Implement PluginOptions ACL.
705 kes Attempt to correct problems with restores with autochangers and
706 use counts going negative
707 kes Rework SD status command and implement API for bat. Implements
708 header, runing waitreservation, devices, volumes, spooling,
709 and terminated status keywords.
710 .status storage=xxx <keyword>
711 kes Clarify TLS error message by adding double quotes around name.
712 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
713 kes Pass jcr to tls routines so debug messages can be handled better.
714 kes Rework jobq resource allocation code, and possibly fix a bug
715 that caused reference counts to get out of sync.
717 kes Rename fd/dir plugin to use Bacula standard underscore.
718 kes Plugin work -- bring dir up to fd level.
719 kes Start implementation of VTL code
720 kes Fix Win32 build after adding new cats subroutine.
722 kes First cut at Duplicate Job implementation.
724 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
725 kes Start PluginOptions string, and refactor a bit of ua_run.c
726 ebl Apply Allan patch that permit to reset recyclepool.
728 kes Test patch -- possible fix or improvement for bug #1053
729 kes Refactor FD and SD status commands to permit new API code in
730 SD, and to fix Win32 build.
731 kes Win32 build is now working.
733 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
734 some ideas in patch from Scott Bailey.
735 kes Begin implementation of duplicate Job control.
736 kes Fix some of Win32 build after recent additions.
737 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
738 which causes the FD to detect whether or not the OS has the
739 honor no dump bit (*BSD systems), and if so, to skip backing up
740 any file with this bit set. The feature is enabled by setting
741 'honor no dump flag = yes' in the Options section of a FileSet.
743 kes Correct po warning message with datarootdir
744 kes Implement more code in dird.c to put configuration parsing in
745 a class rather than use globals.
746 kes Restructure SD status command for implementation of bat API
749 kes Suppress incorrect 'Will not descend from x into y' messages.
750 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
751 daemon globals used by parser.
752 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
754 kes Fix free of plugin_list when none exists.
756 ebl Apply accurate project patch.
758 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
759 on non-mempool object)
760 kes First cut of converting FD .status to work with bat API.
762 .status client=XXX header
763 .status client=XXX running
764 .status client=XXX terminated
765 kes Implement first cut of Copy Job.
766 kes Implement Catalog in Pool resource. It overrides catalog specified
767 in the Client resource.
769 kes Apply patch (with some difficulties) from Joao Henrique Freitas
770 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
772 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
773 ftruncate() actually works. In the case of some (cheap) NAS devices,
774 it does not, and so recycling NAS Volumes does not work. The code
775 simply unlink()s the file, then recreates it. This fixes bug #1011.
777 kes First incomplete cut of big malloc blocks for htable.
778 kes Tweak plugin code.
780 kes Plugin debug code + tweak a couple bat dialog layouts
782 kes Fix creating first JobMedia record during Migration to include
783 proper index. This caused slow restores of migrated jobs.
784 kes Temp fix to plugin name file_index.
785 kes Bacula backed up and restored a MySQL database.
787 kes Implement plugin restore.
788 kes Implement parsing of db_driver to give db_type index.
790 kes First cut of plugin restore code.
791 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
792 and do not strip paths on symbolic links.
793 kes Set catalog backup database and user name from values specified on
794 the ./configure line.
795 ebl Fix #1031 about wrong pool source information in job report.
798 kes Remove a redundant jcr argument to find_files, match_files, and
800 kes Implement '.status dir header|scheduled|running|terminated' that
801 prints the requested status section. With the exception of the
802 header, the other reports have fields separated by tabs (\t).
804 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
805 a resource embedded run command to find a since time if no explicit
806 since time was supplied on the command line.
807 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
808 that updates the state file at job termination time in addition to
809 when the daemon terminates.
811 kes First version where a plugin did a backup.
812 bpipe-fd.so created a backup file, wrote a test
813 string to it, and Bacua could restore this fabricated file.
815 kes Implement DB Driver = string for the DBI driver.
816 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
817 kes First cut of code for loading Win32 plugin dlls. Implement
818 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
819 and implement a dlfcn.h file based on opengroup's definitions of
822 kes First cut plugin directives.
824 kes Apply patch from bug #1049 to prevent stripping the path on a
826 kes Attempt to fix bug #1047 where stripping a path corrupts the
827 heap. Waiting for feedback.
828 kes Correct the Mount message not to suggest labeling a new tape
829 when doing a restore. Submitted by email by John Stoffel.
830 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
831 FD by using casting. Reported in bug #1042.
833 kes A bit of crypto cleanup. More later.
835 Release Version 2.2.8
837 kes Apply patch from Martin to correct bug #1040, bscan sets existing
839 kes Fixed important spelling error in doc -- bug #1045.
841 ebl Fix bextract to be able to extract non-portable Win32 data to
843 kes Move initialization of read/write res lock earlier in the code.
844 This fixes the crash with a null conf file. This fixes bug
846 kes Redefine CURES in lib/parse_conf to be URES and move it all
847 into lib/parse_conf.c -- this responds to bug #1042, but does
848 not fix it. The fix is not to compile with FORTIFY_SOURCE.
849 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
850 the trunk SVN. I don't think this was reported as a bug.
852 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
854 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
856 kes Add DataDespooling and DataCommitting status (committing is
857 the last despooling).
858 kes Finish implementation of new reservations code noted below.
860 kes Fix bsnprintf for float point numbers. I broke recently when
861 parameterizing some variables. This fixes bug #1036.
862 kes Undo recent reservations changes ... will apply them later
863 when they work better.
865 ebl Fixes #1034 which cause mysql to hang the connection after 8h
866 ebl Change default statistics target of filename.name and path.path
867 fields for PostgreSQL. This speeds lookup by indexes. Thanks
869 kes A few more tweaks to new reservation code. Make sure to clear
870 vol released flag when retaking volume. When reading label and
871 label is bad mark volume unused. When recycling, mark volume
872 unused so it can be renamed.
874 kes Fix reserve_volume() so it doesn't release a volume in use
875 (i.e. a volume entry not marked released). This should be
876 the last part needed to fix bug #1018.
878 kes Move Heartbeat documentation from Job to Director resource.
879 This fixes bug #1033.
881 kes Fix existing switch drive SD code to call autochanger to release
882 any old volume. This must be done to keep the autochanger from
883 releasing subsequently newly reserved volumes in doing a close().
884 This should fix bug #1018.
885 kes Fail if attempting to get console input in batch mode. This
886 should help fail RunScript console commands that are incomplete.
887 kes First cut implementing switch_drive() in SD (not actually called).
889 kes Implement first cut running console commands in a RunScript.
891 ebl Fixes bug #1028 where 'Selection Type' option was not usable
893 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
896 Release Version 2.2.7
898 kes Add new free_tls() entry point so that Win32 builds.
899 kes Fix compile warning in src/lib/util.c
900 kes Fix entry point for edit_job_codes() so that Win32 builds.
901 kes Fix seg fault Frank Sweetser reports in regression testing
902 on his systems. The problem was that the original author of
903 bsnprintf.c did not take into account the side effects of
904 using ++x in the argument to a #define.
905 kes Make SD protocol backward compatible with version 2.2.x.
907 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
908 because Bacula no longer restores sockets.
909 ebl Always use ignorecase fileset option on win32 FD.
911 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
912 that implements double quoting include names in conf files,
913 and also allows piping input by having the first character
914 be a vertical bar (|).
915 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
916 that implement %f in RunScripts to pass the FileSet name.
917 kes Skip leading | when lex input comes from a pipe as suggested
918 by Michael Stapelberg <michael@stapelberg.de>.
920 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
921 Nerijus Baliunas <nerijus@users.sourceforge.net>
923 kes Implement Plugin Directory and plugin events.
925 kes Implement a security enhancement: TLS authentication but no
926 encryption. Enabled by setting 'TLS Authentication = yes'.
927 Note when this is on, TLS encryption is turned OFF!
929 kes This patch corrects a problem where the maximum concurrent storage
930 jobs counter gets out of sync during restore jobs causing jobs to
931 'wait on max Storage jobs'. This patch fixes bug #1009.
933 kes This patch fixes bcopy so that it produces correct Volumes.
935 kes This patch eliminates spurious output to the console during a VerifyVolume
936 job that contains encrypted data. It fixes bug #1024.
938 kes This patch prevents the 'status dir' command from trying to use a scratch
939 volume and possibly moving it from one pool to another. This patch fixes
942 kes Add new include to postgresql.c suggested by Marc Cousins so
943 that it compiles correctly with pgre version 8.3.
945 kes Fix --archivedir addition to configure. Replace it with
946 --with-archivedir in configure.in This fixes the regression
948 kes This patch fixes bug #1012 where the job is canceled because
949 of Max Run Time exceeded when the job has not yet started.
951 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
952 one 'part' to write. Instead of each part being stored on disk,
953 written to DVD, then deleted from disk, all parts are written to disk,
954 and only the last is written and deleted from disk.
955 kes This patch fixes the status command to include the formating string for
956 JS_AttrInsterting. It fixes bug #1021.
957 kes This patch should fix the Mac OS X build problem on the latest
958 Darwin, where sys/types.h was not included correctly (apparently
959 due to a change in the Mac headers). The solution was to explicitly
960 ensure that it is defined for the ./configure.
961 This patch also has a rebuild of configure that includes the Debian
962 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
963 kes This patch should ensure that queued messages to the console are
964 displayed as soon as possible. It should fix bug 1007, but has been
965 reported not to work.
967 kes This patch fixes the infinite loop when trying to increase the
968 maximum number of volumes in a Pool during the add command.
969 This patch fixes bug #1008.
971 Release Version 2.2.6
973 db Remove extra data on estimate command in joblist for bat.
975 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
976 really change anything, but is the beginning of doing it *right*.
977 To do it completely right the LastWritten date must be passed to
978 the SD, but it is not yet done.
979 kes Minor tweaks to some bat restore SQL.
980 kes This patch fixes bug #1003 where putting the message output from
981 a Verify job into the catalog results in a recursive loop. The problem
982 seems to show up only with postgresql (to be verified).
983 kes Correct %x to %p in postgresql debug statement.
985 kes Fix bug #942 where lots of emails where generated when the heartbeat
986 interval was low and Bacula wanted a different tape from the one in
989 ebl Add new SD despooling attributes and Dir inserting attributes
990 job status codes in the catalog (Status table).
992 ebl Use qmake-qt4 instead of qmake when available (debian system).
994 kes Add a security warning to src/cats/make_catalog_backup.in indicating
995 that passing the password via the command line (arg 3) is insecure.
996 This responds to bug #990 (it doesn't fix it).
998 kes Set default debug_level to zero. This corrects bugs #991 and #993.
999 kes Fix a crash in bat when it cannot connect to the Director for example
1000 if the Director is not running.
1001 kes Remove redundant INDEX (JobId) from File table in the trunk.
1002 This fixes bug #992.
1003 kes Make explicit exception to GPL in LICENSE to permit linking
1004 the Win32 FD with Microsoft VSS code.
1005 kes Apply the Solaris package patch from
1006 Masopust, Christian <christian.masopust@siemens.com>
1007 kes Apply the patch to optionally add a timestamp in the debug output
1008 submitted by Mariusz Czulada <manieq@wp.eu>.
1010 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1011 backend (sql_strerror). Fixes bug #989
1013 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1014 It applied with no problems.
1015 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1016 awk are on the path.
1017 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1018 since the status is returned on stderr on Solaris.
1019 kes Activate Close button on tray-monitor window. This fixes
1021 kes Check for NULL item in parse_conf.c before calling it. In the
1022 case of Device, there is no item and this caused a seg fault when
1023 Device appears in the conf file.
1024 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1025 avoids pulling in config.h multiple times in some new code.
1027 kes Fix spurious warning message printed when creating a volume with
1028 a LabelFormat. This fixes bug #976.
1030 Release Version 2.2.5
1032 kes Add JobId in place of Job name in all the Jmsg() output.
1033 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1035 kes Make maxvol-test and new more strict maxvol2-test work.
1036 kes Print JobId in all Jmsg() job output.
1038 kes Add new SD despooling attributes and Dir inserting attributes
1039 job status codes. This fixes bug 961.
1040 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1042 kes Fix doc issue. This fixes bug #963.
1043 kes Fix listing performance problems in bat. Pointed out by
1045 kes Remove old debug code.
1046 kes Fix bat code that tests for Win32. This should fix bug #968
1047 kes Query 5 list wrong Vol after migration. This fixes bug #960
1049 ebl Fix #969 where user can't change Replace option in restore menu.
1051 kes Save jcr in thread specific data (tsd) for each thread.
1052 kes Make Dmsg() print JobId as -%u.
1053 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1054 for the thread if it exists.
1055 kes Remove old reservation debug jid code.
1056 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1057 ebl Add an option that permit to specify spool size in job
1058 definition. (Applying patches/testing/spoolsize_per_job.patch).
1059 You must upgrade SD and DIR at the same time.
1060 dvl Add new configuration item --archivedir
1061 dvl Adjust regression tests to use tmp not /tmp. This will allow
1062 multiple concurrent runs of the regression tests.
1064 kes Fix race condition that drops final block written to volume.
1065 This happens in rare cases with multiple simultaneous jobs
1066 when the Volume fills. This fixes bug #964. May be related
1067 to bug #935 and possibly #903.
1068 kes Eliminate more strerror() and replace with bstrerror().
1069 kes Remove BSD getopt and replace with unrestricted IBM version.
1070 kes Fix Win32 build for changed calling sequences.
1071 kes More tweaks to the mount volume routines to get everything
1072 right. Changed variable name from find to have_vol, which is
1073 much easier to understand.
1074 kes Enhance btimer debug code.
1076 kes Fix FD->SD authorization failure, which was due to spurious
1077 wakeups from a pthread_cond_timedwait(). Simply check the
1078 predicate before continuing. This fixes bug #953.
1079 kes Add const char where needed (more to do). Remove temp debug code.
1081 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1082 kes Don't overwrite error message in check_tables_version.
1084 kes Unlock batch insert tables with same calls used elsewhere.
1085 kes Allow starting 59 jobs a second.
1086 kes Make SD session key more random.
1087 kes Add retry for SQLite opening db if it fails. Probably helps
1089 kes Suppress extra error messages during batch insert failure.
1091 kes Add jcr to timer packets so if killed message can be sent to job.
1092 kes Add JobId to all Dmsg() output.
1093 kes Put some FD auth code on dbglvl rather than fixed.
1094 kes Return insert attributes error message in db msg buffer to avoid
1095 false error messages. Helps fix bug #966.
1096 kes Separate batch init error messages. Probably helps fix bug #966.
1097 kes Make SD code that contructs attribute insert check string lengths
1099 kes If Dir gets an error during inserting attributes, cancel SD.
1100 This reduces unnecessary error messages.
1102 kes Correct search boolean for getting Volume info
1103 ebl Cleanup batch insert code. Probably fixes bug #965.
1104 kes Back out one small change to the reservation system (reserving a volume).
1105 kes Rework how a Volume is mounted. It is now much more intelligent and
1106 will always attempt to use any mounted volume if possible and reduces
1107 calls to the Director asking about volumes.
1109 kes Turn off some code when batch insert not enabled.
1110 kes Edit FD name in connect error messages.
1111 kes Rework the reservation system to take into account that the Director
1112 might give us a Volume that is different from the current one being
1113 used, and to ensure that we don't exceed Maximum Volume Jobs.
1114 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1115 fatal error with multiple jobs running'
1116 kes Add more debug code in reservation system.
1117 kes Implement maxvol-test to check bug #947.
1119 kes Add code to handle tray monitor separated from Win32 FD.
1120 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1122 kes Add missed return in fixing verify bug -- trunk only.
1123 ebl Fix a command parser issue causing a director segfault.
1124 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1125 This fixes bug #954.
1126 kes Increase the max block size to 4MB fixes bug #957.
1127 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1128 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1129 is not properly mounted (recognized) during a poll.
1130 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1131 Job that has differences reports Verify OK.
1132 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1134 ebl Add an option to operate on all pools with update vol parameters.
1135 This complete the project 20. Patch from Nigel Stepp.
1136 ebl Add history support to bconsole when using readline.
1137 Using Ctrl-D to exit doesn't update .bconsole_history
1138 kes Modify new volume algorithm to use max MediaId for generating next
1139 volume number rather than the count of Volumes. This should essentially
1140 eliminate the failure rate if some volumes were deleted. Bug #921.
1141 kes Begin implemention of Optimize Job Scheduling.
1142 kes Implement restore callback that Dirk and I agreed on for bat
1143 restore. This fixes bug #928. Restore of backup of zero files fails.
1144 kes Fix SQL Catalog logging which broke with new db_escape_string
1147 Release Version 2.2.4
1149 kes Fix bacula_cats.def for new db_escape_string().
1150 kes Increase size of name string when FD making connection to SD.
1151 May fix bug #953. FD->SD connection failure.
1153 kes Add code to help Dan debug 2drive-incremental-2disk test.
1154 kes Add code to try to fix bug #908.
1155 kes Add waits to multiple exit detection code to try to force pid
1156 file to always be deleted.
1157 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1158 This fixes bug #950.
1159 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1160 trying to switch drives by checking for blocking before unblocking.
1162 kes Cancel storage daemon in all cases where FD reports error. This
1163 should fix virtually all cases of bug #920.
1164 kes Fix db_escape_string() for MySQL which did not compile.
1166 kes Fix error message that was clobbered when Dir tells SD it does not
1167 have write permission on Volume. This should fix a minor point
1168 in bug #942, but not the main problem.
1169 kes Add code to cancel job in SD if FD connection fails. This should
1171 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1172 dvl Pass jcr and db into db_escape_string() to enable better escaping
1174 kes Fix migration code to get correct Volume name with multiple volumes
1175 by skipping |. Fixes bug #936.
1176 kes Implement patch supplied by Landon to fix bug #944 where using
1177 TLS with bconsole uses 99+% of the CPU.
1178 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1180 kes Move patches into patches directory.
1182 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1185 ebl Using 'm' in bconsole will show messages like before,
1186 and not memory usage.
1187 kes Fix bug #935, and probably also bug #903 where files were not
1188 restored. MediaId was not properly set in JobMedia record after
1191 kes Suppress chown and chmod error messages if the FD is not running
1194 kes Apply Martin Simmons' patch that should turn off the new API usage
1195 when batch insert is turned off allowing building on older
1197 kes Add ./configure search in qwt-qt4 for qwt package
1199 kes Bacula is now free of 3rd party GPL copyrighted code!
1200 kes Remove idcache.c
1201 kes Add guid_to_name.c/h which replace idcache.
1202 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1204 ebl Detect if new PosgreSQL batch insert API is present.
1205 kes Correct incorrect mempool call causing Director crash. Occurs on
1206 systems without va_copy().
1207 sb Update spec files for 2.2.1 release
1209 kes Fix memory pool call in ua_output.c. bug #934.
1210 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1211 Add test program to fnmatch.c
1213 kes Integrate patch to README.vc8 from
1214 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1215 edit it to get it into Unix patch format.
1216 kes Implement mkpath.c to replace old FSF makepath.c
1218 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1220 Release Version 2.2.1
1222 kes Update POTFILES.in
1223 kes Cleanup a few underquoted AC_DEFUNs in configure
1224 kes Apply patch from Martin Simmons that adds a test for va_copy to
1227 kes Fix bug #921 by increasing the number of tries to create a new volume
1229 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1230 can be called multiple times. Implement a version for machines
1231 without va_copy() that gets a big buffer.
1233 kes Integrate more portable zone offset code into bsmtp.c
1234 Submitted by Attila Fülöp.
1236 kes Fix bad SD->FD return status reported by
1237 (James Harper) <james.harper@bendigoit.com.au>
1238 ebl Fix a bug in read_close_session which return random status
1239 thanks to James Harper
1241 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1242 and directory names during restore of single file/directories.
1243 kes Add sanity checks to .sql command when string is empty. Hopefully
1244 that will resolve Dirks Director crash.
1246 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1247 in the bsmtp chat subroutine when debug is >= 10.
1249 kes Fix Director crash when running bat SQL queries.
1250 kes Add David's notes on Item 8: Copy pools.
1252 kes Rework projects file to be current and ready for a vote.
1253 kes Enhance lex scanner error message.
1255 kes Tweak LICENSE file to mention BSD code.
1256 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1257 if specified on the ./configure.
1258 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1259 This class is intended to allow us to open a second bsock to the
1260 Director while in the restore subdialog.
1262 kes Fix configure to create bat Makefile before creating dependencies.
1263 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1264 kes Add a tooltip to the tray monitor.
1265 dvl Set the Director's PID file before dropping privs. This fixes
1268 kes Update AUTHORs file
1269 kes Increase the default max concurrent jobs to 20 in FD and SD to
1270 correspond with the default .conf files.
1271 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1272 some different, of the same file created by RN when porting the
1274 kes Rearrange some of the Win32 directories and the placement of the files
1276 kes Set DEVELOPER flag in version.h
1278 ========================================================================
1279 Release Version 2.2.0
1281 kes Apply a second doc patch from Marc.
1282 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1283 improves the tips section that discusses how to setup multiple
1286 kes Update bat README file.
1287 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1288 corrects a typo in the Recycle status check in db_find_next_volume().
1289 This will probably fix a number of annoying problems with multiple
1291 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1292 bnet calls -- no functionality change.
1294 kes Modify the Verify output to specify if files are missing on
1295 the Volume(s) or disk. Fixes confusion in bug #916.
1296 kes When more than one Volume is read in a migration job, the last
1297 Volume bytes reported are from the last read volume rather than
1298 the last written volume. Fixed. This fixes bug #910.
1299 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1300 It previously printed New Recyle flag is: no. This fixes bug
1303 kes Correct seg fault when switching tape drives during restore.
1304 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1305 be used until after 2.2.0 release.
1307 kes Remove fnmatch() in SD that permitted wild card specifications.
1308 This fixes bug #914.
1310 kes Fix %g in filename returned by SQL for browse tree reported by
1312 kes Fix configure so that it puts config.out in the cwd rather than
1314 kes Attempt to fix the locking problem reported by Eric in bug #906.
1315 kes Make berrno class to leave errno unchanged after constructor call.
1316 kes Make bnet_server use the heap rather than the stack to allocate
1317 its socket fd pointers to avoid a crash at termination. Problem
1318 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1320 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1321 and putting it in depkgs-qt along with Qt4.3.
1323 kes Rework code in acquire.c that switches drives for reading when
1324 the Media Type does not match. This should fix bug #906
1326 ebl Fix a director segfault during job setup #907
1327 kes Correct seg fault in postgresql when first operation returns no
1328 rows. Fixes Dirks File browser problem seg fault with bat.
1330 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1331 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1334 kes Implement PopUp YES/NO dialog for bat.
1336 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1338 kes Correct RunScript to terminate job in FD on failure.
1339 kes Change abort_on_error and AbortJobOnError to fail_on_error
1340 and FailJobOnError in RunScripts.
1341 kes Minor tweaks of code formating in RunScripts, principally to
1342 avoid depassing 80 columns.
1344 kes Eliminate one #ifdef Win32 in bsmtp
1345 kes Implement grow tool to grow a file for testing very large databases.
1346 kes Add big-vol-test to test Bacula seeking with > 5GB.
1349 kes Modify find_next_volume() to return all values in Media record.
1350 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1354 kes Update Release notes
1356 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1357 Warning, in previous beta version, all media get from scratch keep their
1360 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1361 This should fix bug #842. Made a note to look at removing the temp
1362 files at the end of the install.
1363 kes Add ability to mount and unmount a file device providing it is
1364 marked as being removable and has the appropriate mount and unmount
1365 commands defined in the Device resource. This fixes bug #830.
1366 kes When applying a storage override, release all previous storage
1367 definitions rather than just prepending the new storage.
1368 This should prevent a good deal of confusion.
1370 kes Implement ./configure search for qwt libraries.
1372 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1373 Win32 FD. This should fix bug #893.
1374 kes Remove an unnecessary beep in Win32 init code.
1375 kes Update copyright dates in Win32 executable about boxes.
1376 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1377 code with a BSD getopt.c and getopt.h.
1378 kes Remove sched.h from the Win32 compat directory -- not used.
1379 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1380 need to shut it down, do it through the services panel or the command
1382 kes Remove some inappropriate Bacula FSFE copyrights.
1383 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1384 kes Fix regress config non-portable test as pointed out by
1385 Florian Heigl <florian.heigl@gmail.com>
1386 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1387 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1389 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1390 Reported by Frank Sweetser.
1394 kes Fix client-only build.
1395 kes Integrate client-only fixes for bsys (initgroups) and conio from
1396 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1397 kes Make arguments to get_scratch_volume() in same order as other
1399 kes Rework the prune_volumes() subroutine so that after purging and
1400 no volume found in desired pool, it will check for a scratch
1401 volume. This prevents recycling the whole scratch pool.
1402 kes Add code to status storage to print boffset_t (largefile support).
1404 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1405 kes You now need a --with-qwt=<dir> to be able to build bat.
1406 kes Update src/win32/cats/bacula_cats.def to include the new
1407 db_get_query_dbids() call on Win32.
1409 kes Correct a problem when selecting a scratch volume and moving
1410 it to another pool that lost some columns.
1411 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1412 kes Enhance Autochanger error messages to include Volume and device name.
1413 kes Rework prune_volumes() code to take account of InChanger flag,
1414 and to handle recycling volumes going to the Scratch pool and
1415 current pool because the RecyclePool directive.
1416 kes Implement a better and more efficient db_get_query_dbids() to
1417 handle creating and passing back a list of DBIds.
1421 kes Start work on new more efficient DBId subroutine. First use
1422 will be for recycling volume to Scratch inchanger.
1423 kes Increase number of JobIds in pruning from 1000 to 10000.
1424 This to be replaced by above routine.
1425 kes Begin implementation of building Qt4 on Win32.
1426 kes Correct typo in fix I added for bad TLS shutdown.
1427 kes Pull 2.0.3 patches into patches directory.
1428 kes Update Release notes. Include qt-console in line count.
1429 kes Update Projects file.
1431 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1432 bug in migration code where a job that spanned two volumes
1435 kes Implement new BST_DESPOOLING blocked state. Change from locking
1436 during despooling in SD to blocking. This means that other threads
1437 can work with the device structure, in particular the reservations
1438 system while despooling.
1440 kes Fix return in reservation message queue that missed clearing
1441 the jcr lock (implemented 26Jun07 below).
1442 kes Rename a number of dev methods to make locking function names
1444 kes Document locking in lock.c. Move lock structures to new file
1447 kes Move reservations message lock to lock jcr only this
1449 kes Move main SD locking code into lock.c (new file).
1450 kes Update Win32 build to include lock.c
1454 kes Dirk committed the qwt library code for drawing graphs in bat.
1455 kes Tweak install of qwt so that it is integrated with ./configure.
1457 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1458 out by Eric (my typo).
1459 ebl Fix configure.in to get batch mode enable
1460 kes Return correct string from authenticate.cpp in bat when connecting
1462 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1463 spurious line drops when using TLS.
1464 kes Do not file reparse points when restoring a file that already
1467 kes Implement Windows reparse points -- similar to directories, but
1468 we do not descend into it. This is a first cut. They seem to
1469 be backed up, but restore is not yet tested.
1470 kes Remove restore_blocking in tls code when shutting a socket to leave
1471 it in blocking mode. Hopefully this will fix the encryption bug
1472 reported by Frank Sweetser.
1473 kes When opening a file for backup, tell the OS that we are going to
1474 read it sequentially -- optimization.
1475 kes Change variable names in authenticate_director() to not conflict
1476 with member names in bat. Caused great confusion with compiler,
1479 kes Queue openssl error messages in case of comm problem.
1480 kes Do shutdown() call if socket terminated.
1481 kes Remove some duplicated code in tls.c
1482 kes Move more of the bsock member variables into private and access
1484 kes Add Frank Sweetser's tls-test to the regression suite.
1486 kes Add Swedish sv.po file
1488 kes Don't print clock skew message in FD if less than 3 seconds diff.
1489 kes Add a bit of VSS info to status client.
1490 kes Implement a first cut of Vista VSS, using Win2003 code.
1492 Release: 2.1.20 beta
1494 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1495 loaded tape but uses first drive).
1496 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1497 This was indeed a Win32 issue.
1499 kes Simplify search of autochanger for in-use Volume.
1500 kes Fix exit condition of check for in-use volume. kes Remove
1501 inappropriate my_postgresql_free_result() in db_close()
1503 kes Fix bad return in FD when encryption signature not found.
1504 Probably caused a crash.
1505 kes Inhibit missing encryption signature error messages for
1506 file types where no signature computed.
1507 kes Correct inverted check on autochanger in reservation system.
1508 kes Tweak debug code in autochanger reservation.
1510 kes Add some additional locking in the cats directory in subroutines
1511 that modify packet variables called from batch insert.
1512 kes Rework how dcrs are allocated. new_dcr() can now be called
1513 with an existing pointer, and it will simply clean it up.
1514 This allows the reservation system to test various different
1515 devices, and will permit easy device changes.
1516 kes A bunch of changes all over to handle new new_dcr() calling
1518 kes Work more on the Volume management in the SD. Remember Volumes
1519 for tape drives and for autochangers (even virtual disk changers).
1520 kes When looking at the Volume list to reserve a drive, handle
1521 autochanger names correctly by interating through the changer
1522 devices. Also call the Director to see if a Volume is suitable
1523 for the current job.
1524 kes Fix some bugs in bscan. Make sure all media records are written.
1525 Make sure that valid JobMedia records are written for disk files.
1526 Previously they were completely wrong.
1527 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1528 that the URLs don't change and so that the developers will all
1529 work off the same copy. Rebuild from scrach.
1530 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1532 Release: 2.1.18 beta
1534 kes Fix seg fault in FD from incorrect digest size.
1535 kes Fix argument to non-OpenSSL crypto.c subroutine.
1537 Release: 2.1.16 beta
1539 kes Remove a few malloc()s from the encryption code.
1540 kes Use the class calls to bsock in filed/backup.c and restore.c in
1541 place of the old bnet_xxx code.
1542 kes Implement code that does an on the fly calculation of the
1543 signing digest during restore of encrypted files. It makes
1544 a best guess at the algorithm, and if it is not correct, will
1545 then revert to the old code which reads the file after it is
1547 kes Implement at least one missing crypto stream in stream_to_ascii()
1548 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1549 #877 where a reload with bad syntax causes Dir to exit.
1551 Cut: 2.1.14 beta (not released)
1553 kes Do not free a volume on a tape drive until another volume is
1554 mounted and read, or the autochanger unloads the volume.
1555 This should help the SD re-use volumes that are already mounted,
1556 and should fix bug #886.
1557 kes Apply patch from user brettedgar that allows gnome2-console include
1558 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1559 kes Apply patch from Lucien Weller that fixes day of week calculation
1560 because of DST flag problem. Fixes bug #887.
1562 kes Move find_next_appendable_volume() to after acquiring a valid device
1563 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1565 kes Unable to reproduce bug 872. However added additional testing for
1567 kes Bug #874 resolved by documenting SQLite limitations.
1568 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1569 kes Bug #881 resolved by removing typo in mtx-changer script.
1570 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1571 approval. Added a link to the wiki on the web page, and implemented
1572 a backup from http://paramount.ind.wpi.edu
1574 kes Fix update allfrompool to pass pool name.
1576 kes Convert to pure GPL v2 license.
1577 kes Fix sscanf problems reported by Peter Buschman that caused
1578 a bus error on Solaris.
1579 kes Rework (simplify) the select prompt in bat.
1580 kes Move get_jobid_from_tid() into lib and create a
1582 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1583 should definitely fix the problem of lost error messages in the
1585 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1586 kes Eliminate tcpd.h from the project. Enclose the #include from the
1587 library with extern C ...
1588 kes Add print of signal name when a signal is trapped.
1590 Release: 2.1.12 beta
1592 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1594 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1595 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1596 makes SQLit3 run 30 times faster, though a bit less safe.
1597 kes Implement --with-batch-insert in configure and detection of thread
1598 safe libraries. It is on by default, but turned off if no thread
1599 safe library (e.g. SQLite 2) is available.
1601 kes Fix Bacula PostgreSQL buffer overruns.
1602 kes Do better checking for NULL results returned from PostgreSQL;
1603 implement retry for failed queries; clear results buffer after
1604 failed query. Hopefully this will correct the PostgreSQL failures.
1606 kes Implement algorithm to handle only one appendable volume with
1607 Prefer Mounted Volumes = no.
1608 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1609 returned from a query.
1610 kes Make volume lock recursive.
1611 kes Implement an additional volume reservation algorithm that
1612 starts by considering all reserved volumes then uses the
1613 old brute force algorithm of searching the resources to
1614 find a suitable device.
1615 kes Add new reservations debug code and refine the old code.
1616 kes Update the win32/dll/bacula.defs file.
1618 kes Tweak reservations algorithm to permit a few more cases, i.e.
1619 volume reserved, but on different drive, ...
1620 kes Enhance SD status to include Pool and Media Type for drive in a
1621 more readable format (a bit longer).
1622 kes Fix PostgreSQL double free.
1624 kes Minor refactoring of restore decryption code.
1625 kes Add code to smartall.c to detect double free of a buffer.
1627 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1628 so that bsmtp will create a correct email address (mailbox only).
1629 kes Modify 'memory' command so that the buffers are listed as 'In use'
1630 to avoid confusion with Orphaned buffers.
1631 kes I reworked the OpenSSL include/lib flags to be handled in
1632 the standard Bacula way, which should fix bug #863 concerning
1633 non-standard OpenSSL libraries.
1635 kes Implement Help Browser window for bat.
1636 kes Fix reload bug that reset StorageId to zero.
1638 kes Fix TLS #ifdefing when TLS turned off.
1639 kes Ensure that when labelling a tape with Slot=0 that InChanger
1641 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1643 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1644 add DISTINCT (required by PostgreSQL).
1645 kes Implement BSOCK authenticate_director() method. Eventually will
1646 authenicate all daemons.
1647 kes Move several more functions into the BSOCK class.
1649 kes Add code to tell the OS that we no longer need a cached
1650 file that we were reading. In findlib/bfile.c. Also,
1651 only cache files that we are reading. Thanks to
1652 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1653 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1654 kes Implement script to automatically generate cats and dll .def
1655 files for Win32 dll.
1656 kes Update README.mingw32 to include new .def file generation.
1657 kes Correct typo in UTF-8 error message as reported by:
1658 jhernandez <julianhernandez@gmail.com>
1659 kes Add additional sm_check() code on debug level 1.
1660 kes Set default debug level to 1.
1661 kes Trap SIGABRT in attempt to get traceback.
1663 kes Reduce bat connect timeout from 30 to 15 seconds.
1664 kes More restructuring and implementing BSOCK class in place of
1666 kes Remove a few unnecessary malloc() tests in crypto code.
1667 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1668 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1669 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1671 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1673 kes Fix Verify InitCatalog. The attributes were not pointing to the
1674 correct saved location.
1675 kes Implement message callback so that GUI is sure to get all
1676 daemon messages. Currently displayed in a dialog in bat.
1677 kes Ignore SIGUSR2 (Bacula timer) in bat.
1678 kes Apply regress patch from bug #859 to allow regress to work
1679 with Solaris compiler.
1681 kes Begin adding TLS support to bat.
1682 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1683 clean up lex.c and make it more readable.
1685 kes Move more bnet functions into the BSOCK class.
1686 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1687 kes Complete change of berrno strerror() method to bstrerror()
1689 Release: 2.1.10 beta
1691 kes Cleanup incorrect email addresses in bsmtp.
1692 kes Make bat display initial messages rather than discard them.
1694 kes First cut of adding .mod to the run command.
1695 kes Implement auto display of messages in bat.
1696 kes Enhanced preferences to allow all Bacula output to be
1699 kes Try to make bsmtp date routines more generic.
1700 kes Fixed bug #856 autochanger documentation.
1701 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1702 kes Add new cats entry point so Win32 builds.
1704 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1706 kes Do better checking for the MySQL 64 bit libraries looking for both
1707 .a and .so libraries.
1708 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1709 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1710 kes Require the thread safe version of MySQL during configure. Thanks
1711 to Andre Noll for pointing this out.
1712 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1713 continuing in migration code.
1714 kes Apply implementation of tray-monitor font derived from gnome-console
1715 submitted by Andreas Piesk <a.piesk@gmx.net>
1717 kes Eliminate important memory loss in SQLite
1718 kes Fixed the batch insert MySQL thread specific data that was not
1719 being freed. See cats/mysql.c:db_thread_cleanup().
1720 kes Fix restore before command.
1721 kes Convert old hdr.name to name() in a few places.
1722 kes Implement update jobid command.
1723 kes Return all time_t dates in db_get_job_record()
1724 kes Stop watchdog in SD earlier.
1725 kes Put Pool just after Storage in please mount message.
1726 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1729 kes Update the po files.
1730 kes Fix Verify InitCatalog by making it cache attributes.
1732 kes Change name bacula-bat to bat for man 1 page to correspond to
1734 kes Check for client and store NULL pointers in status command. This
1736 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1737 kes Fix sign extended editing of %p.
1738 kes Clean out a little old #ifdefing in cats/mysql.c
1740 kes If time diff between DIR and FD is more than 600 seconds convert
1741 INFO message to WARNING.
1742 kes Implement heap size display in status for all daemons.
1743 kes Attempt to fix MySQL db open memory loss (not successfull).
1744 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1745 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1746 Query. This looks like a MySQL but but by doing extra releases,
1747 the memory goes away. This should fix bug #847.
1749 kes When backup fails, cancel SD before waiting for sd termination.
1750 kes If SD is waiting for FD to connect during cancel, wake up the
1752 kes Fix fsf code so that errno is correctly reported.
1753 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1755 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1756 so that Bacula doesn't later stumble into a seg fault.
1757 kes Use the term Restore Client in the restore Job report.
1758 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1759 the original job's FileSetId.
1760 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1761 spooling in migration jobs. Not yet tested.
1762 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1763 reading conf file from a pipe. However, do it with open_bpipe()
1764 rather than popen. Not yet tested.
1766 kes Fix an ugly bug where the VolCatBytes were getting updated
1768 kes Implement bconsole memory command that prints current memory
1769 usage, plus smartalloc dump.
1770 kes Clarify some error messages in backup, admin, and migrate.
1771 kes Shrink label dialog to smaller size.
1772 kes Invert Cancel OK buttons on restore to be OK Cancel.
1773 kes More strerror() to bstrerror() conversions.
1775 kes Start implementing bstrerror() in place of strerror().
1776 kes Stripping path -- seems to work.
1778 kes Prevent door and port files from being restored (mostly
1780 kes Free an unreleased buffer in compat code.
1781 kes Change console Job name from *Console* to -Console- to eliminate
1782 Win32 filename problems. Put Win32 path separator when creating
1783 Console file. This fixes bug #846.
1784 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1786 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1788 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1789 to force Win32 error message.
1791 kes First cut strip path. The data should be passed to the FD,
1792 but nothing is done with it yet.
1793 kes Enhance the digest and signature routines in the crypto
1794 library to accept a JCR and to use it to print error messages
1795 so that they will go in the Job report rather than the daemon's
1797 kes Simplify some of the verify signature code.
1798 kes Simplify a few of the alternative returns in the signature
1801 ebl Use only POSIX regex instead of GNU regex in breg.c for
1802 File relocation. It fix broken freebsd compilation.
1803 kes Convert all other Dir files to use new ua class message
1805 kes Tentative fix for missing digest signature in bug 807.
1806 kes Correct handle problem in new win32_ftruncate routine.
1807 kes Convert ua_purge.c and ua_update.c to use new ua class
1808 message routines for bat.
1810 kes Correct incorrect installation of LICENSE in Win32 installer.
1811 kes Display LICENSE at the beginning of the Win32 install.
1812 kes Attempt to correct the need for the png files to be installed
1814 kes Reapply my bat.conf install script in qt-console. I think I
1815 editted bat.pro instead of bat.pro.in and it was lost.
1816 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1817 the /var/lock/subsys for subsysdir. Also corrects typos in the
1820 kes First cut update job.
1821 kes Correct configure to include qmake of src/qt-console directory.
1823 kes Make restore job yes/mod/no print in one command so GUI works.
1824 kes First cut implementing backup and restore client.
1825 kes Correct editing in Verify output that caused a seg fault.
1827 kes Insure that bat.conf is not overwritten during installation.
1828 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1829 while I was implementing migration in March 2006 !
1831 ebl Cleanup file relocation, using char *RegexWhere instead of
1832 char *where + bool where_use_regexp
1833 kes Update some manpages and add bat manpage.
1834 kes Make a first cut at converting bacula.spec.in for bwx-console
1836 kes Apply patch from John Goerzen to add hostname as fourth argument
1837 to make_catalog_backup script.
1838 kes Fix typos I introduced into bsmtp.c
1839 kes Make pm_strxxx() routines handle input of NULL pointer. This
1840 is to protect from NULL pointers returned from SQL databases.
1841 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1842 kes Add more debug to FIFO code -- fix fifo regression test.
1844 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1845 kes Add thread timer to bnet_connect() to break from OS if wait time
1848 kes Update Win32 build to include new files, new symbols, and
1850 kes Implement socket level heartbeat (tcp_keepidle)
1851 ebl Commit File relocation patch
1852 kes Make bat have 'make install' target.
1853 kes Warn during install if old gnome-console binary found.
1854 kes Warn during install if old wx-console binary found.
1855 kes Add -8 option to bsmtp command line to add content type utf-8.
1856 Fixes bug #809. (Character coding problem in bsmtp).
1857 kes If < is found in target (from, to, cc) then do not enclose the
1858 target in < > in bsmtp. Fixes bug #772 (malformed address).
1859 kes When printing certain items in dbcheck, stop after 300000.
1860 Fixes bug #822. (dbcheck loops).
1861 kes Incorrect status in Dir after waiting for mount with poll set.
1864 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1866 kes Print waiting to reserve a device every 5 mins.
1868 kes Don't call close_part in label.c if tape and relabel.
1869 kes Don't free volume if busy in close() -- should help with
1871 ebl Fix #824 RunScript bug (After script could be execute twice)
1872 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1873 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1874 Add a regression script to test RunScript
1876 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1879 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1880 deprecated. No additional bugs will be fixed, and they will be dropped
1881 in a future release (probably 2.4.0).
1882 kes Change name of wx-console to bwx-console to make it more Bacula
1884 kes Change the name of gnome-console to bgnome-console to make it
1887 kes Some time in March, a Feature Request with patch from Jorj Bauer
1888 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1890 The ability for the director to validate a Client (FD) CN against
1891 an arbitrary set of patterns rather than the hostname, with
1892 A new 'TLS Allowed CN' set of directives which are implemented
1893 in the Client resource. Then pattern matching is used in place
1894 of hostname matching against the Certificate's CN. As an example, we
1895 have certificates which (a) use a local CA, and (b) have a CN of the
1897 kes Add new/changed entry points to Win32 build
1898 kes Create unaccepted-projects for projects that are not accepted.
1899 kes Simplify locking in the reservations system.
1900 kes Add more debug code in reservations.
1901 kes Make sure error condition on reserving a volume is handled correctly.
1902 kes Correct handling of volume_in_use.
1903 kes Correct handling of initializing a device.
1904 kes Move handling of broadcasting releasing a device into release_device().
1905 kes Correct attaching dcr to dev so that it is only done if device
1906 is properly initiated.
1908 kes Locking debug level tweaks in SD.
1909 kes Tweak new Volume code.
1911 kes Add exec external-command [wait-seconds] to bconsole. This
1912 executes the external-command. Note! normally external-command
1913 should be enclosed in double quotes.
1914 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1915 it should normally be off in a production system.
1917 kes Implement die command for SD so that we can force it to dump.
1918 kes Implement SD lock debug code.
1919 kes Implement new algorithm for keeping Volume list in SD. It
1920 is now owned by the device.
1922 kes Implement new code for freeing in use volumes that should
1923 resolve if not all, some of the problems of multiple drive
1924 tape conflicts described in bug 801.
1926 kes Fix gui/bacula-web/images files in svn.
1927 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1929 ebl Fix a bug in batch mode (in string escape)
1930 kes Correct migration prune SQL typo that crept in in a
1931 recent 2.1.x change.
1933 kes Move bnet_despool() into class in bsock.c
1934 kes Modify job report to include director name and Build OS.
1935 kes Move drop root privilege and check_catalog() before fork.
1936 kes Add update database scripts (version 9 to 10) to updatedb directory.
1938 ebl Check size and age of each file after its backup to see if
1939 it has changed during backup, if 'checkfilechanges' is set.
1940 The FD will do an extra check (stat(2)) after
1941 each file backup. mtime, ctime and size are compared with
1942 'before backup' information. If time or size mismatch, an
1943 error message will be generated. You must upgrade FD to use it.
1945 kes Make database name and user configurable
1946 --with-db-name=xxx --with-db-user=xxx
1947 kes Add back database type to message.c for debugging.
1949 kes Implement dir_sql() which issues an SQL query.
1950 kes Modify bat medialist to use dir_sql() and do some minor C++
1951 formatting as well as eliminating a number of pointers, simplifing
1954 kes Fix some of the mtx-changer grep commands for tape label readers.
1955 kes Convert a number of bsendmsg into the appropriate send/warning/error
1956 message class calls.
1957 kes Suppress the using database message in the .sql command.
1958 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1960 kes Add context menu for floating a window.
1961 kes Some minor cleanup and name changes in qt-console
1962 kes Add doing mt setblk 0 in Win32 mtx-changer.
1963 kes Apply Martin's bug fix to move definition of ENODATA for
1965 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1966 sqlite2 and sqlite3.
1968 kes More pruning cleanup.
1969 kes Turn on wait_for_drive by default in mtx-changer.
1970 kes Turn on Batch insert code by default as it now passes regression.
1971 kes Add ./configure --enable-bat to enable building of Bat.
1972 No install yet though.
1974 kes Implement a new .sql command for bat.
1975 kes Implement code to turn off pruning in obtaining the next volume.
1976 Pruning is turned off for the status dir command, but turned on
1977 for SD requests and for the list nextvolume command.
1979 kes Correct Qmsg() that was not updated correctly when committing a
1980 previous change (probably the recent TLS patch).
1982 kes Write new subroutine is_volume_purged() that explicitly checks
1983 if the Volume is purged, and if so marks it as such. This should
1984 resolve problems reported about needing to mount twice to recycle
1986 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1987 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1988 amount of duplicated code.
1989 kes Do volume pruning only for the Media Type desired (reduces pruning time
1990 if multiple Media Types are in the same pool).
1991 kes Implement more detailed info in the Job report for the Bacula version
1993 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1995 ebl Add bbatch tool to bench database and insert mode.
1996 Fix sql quote stuff in batch mode
1997 Fix sql stuff for mysql
1999 kes Correct problems with am/pm scheduling. Fixes bug #808.
2000 kes Implement new prunning code that prunes up to 1000 jobs at
2001 the same time. The same technique can be applied to a number
2002 of other prune/purge subroutines.
2003 kes Add an insanity check when starting a new tape job to ensure
2004 that the tape position has not been changed. If so fail the
2006 kes Fix Win32 build for dlls to add the folllowing:
2007 src/lib/bsock.c -- new file with new entry points
2008 src/lib/dlist.c -- new entry points
2009 src/cats/sql_create.c -- new entry point
2010 src/cats/sql_cmds.c -- new DATA item exported
2012 ebl batch mode cleanup bscan-test is ok now.
2013 kes Implement SD code to check length of disk volume before appending.
2015 kes Correct return status on db_batch... routines.
2016 kes Add call to db_write_batch_file_records() to migration code.
2017 ebl Fix AfterJob timing
2018 kes Move the checking of the database in initializion of the Director
2019 to after we drop privileges. This avoids the need for both root
2020 and bacula access to the DB.
2021 kes Correct a misplaced variable definition in src/filed/backup.c
2022 kes Correct how the new batch insert db_create_attributes_record()
2023 uses the arguments. Caused a seg fault in bscan.
2024 kes Implement lock() and unlock() methods in DEVICE class.
2025 Implement block() and set_block(xx) methods in DEVICE class.
2026 kes Modify bnet_connect() so that it uses time() to check for the
2027 wait time expiring (on some OSes, some system calls may not
2028 return immediately).
2029 kes Modify Verify to obtain the previous JobId when it is actually
2030 running rather than at schedule time (as it was in 1.38.x).
2031 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2033 kes When checking pid in pid file, continue running if the pid is
2034 the same as ours. This occurs on IRIX after a system crash.
2037 kes Extend new GUI API.
2038 kes Make the ua structure a class, and implement send_msg(),
2039 error_msg(), warning_msg(), and info_msg().
2041 kes Apply fix from for building wx-console on the Mac from
2043 kes Implement new select mechanism for GUI programs.
2044 kes Reorganize initialization of stackedWidgets in bat.
2046 kes Add updated nagios plugin supplied by Christian Masopust.
2048 kes More bat implementation.
2049 kes File migrate bug with Pool Occupancy using mediaid instead
2050 of jobids. Fixes bug #795.
2051 kes Fix orphaned buffers in filed backup and verify due to
2052 crypto buffers not freed during errors. Fixes bug #789.
2053 kes Extend new GUI api code to tree commands.
2054 kes Ensure that tree and dot commands check console ACLs.
2055 kes Permit marking directory with trailing slash.
2056 kes Allow 20 console connections (instead of only 10).
2058 kes Add smartctl call to bacula-sd.conf as an example of getting
2061 kes Modify jobq.c to let simultaneous restore jobs run. This may
2062 cause them to fail if they cannot get a drive.
2063 kes Add Client Connect Wait to Storage daemon to permit users to
2064 modify the time the SD waits for a FD connection.
2066 kes Correct virtual changer check which was backwards. This caused
2067 volumes to be unloaded into slots already occupied.
2069 kes Apply Command ACL filter to JobId list in restore command.
2070 kes Correct typeo in var.c patch.
2072 kes Don't let Bacula prune File or Job records for the current Job.
2073 kes Fix variable substitution pad + inc bug reported (with patch)
2076 kes Correct SQLite log table index as reported by Luca Berra.
2078 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2080 kes Begin implementing new comm signals for API.
2081 kes Fix a few places in lib/message.c where the open fd may
2083 kes Continue implementing lib/bsock.c (real class). Make jcr,
2084 who, host, and port private. There are new methods to access
2085 them for non-class use. This required touching a number of files.
2087 kes Add LANG=C to autoconf/randpass so it works with languages other
2088 than English. Fixes bug #788.
2090 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2092 You will not be able to generate Include/Exclude list any more.
2093 It will be fixed soon.
2094 If you want to use this, you can apply
2095 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2097 kes Restore of sockets created false error messages because Bacula
2098 no longer restores sockets, but the code was still trying to
2099 set the attributes on a non-existent file. Reported by a user.
2100 ebl finish RecyclePool feature
2101 Media will takes Pool.RecyclePool
2102 when moving from Scratch to a Pool or when user will do
2103 update volume=xxx frompool
2104 To use it, add RecyclePool = aPool to your Pool resource
2107 RecyclePool = Scratch
2111 kes Expand new BSOCK class adding signal() and new BNET signals.
2112 kes Begin enhancing the dot commands adding a new API function
2113 that returns more information and will make it easier
2114 to interface to the Director from a program.
2116 kes Make DEVICE fd private. Its new name is m_fd, and can be
2117 obtained with dev->fd() outside the class. This is the
2118 first of many DEVICE members to be made private.
2119 kes Implement Michael Renner's idea on having a virtual disk
2120 changer. I made some minor modifications (e.g. I did not
2121 implement the Virtual Changer directive, but simply set
2122 the Changer Command to an empty string.
2124 kes Implement a BSOCK send() method that writes the whole record
2125 in a single write() request rather than in two.
2126 ebl add update volume=xxx recyclepool=yyyy
2127 volume takes recyclepool from pool when using update volume=xxx from pool
2129 kes Fix encryption deblocking bug, which caused some restored files
2130 to be truncated. This fixes bug #763.
2131 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2132 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2134 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2135 ebl Use btime_t instead of uint64_t in media patch.
2137 kes Optimize the use of the database a bit in the Status dir command.
2138 Only open it when needed, ensure that if any previous database
2139 was opened, it is closed.
2141 kes Correct VolCatBytes bug from media patch.
2142 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2143 in the case of orphaned records.
2144 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2145 and File records in 300K chunks to be more efficient. This
2146 idea came from Juan Luis Frances (if I remember right).
2147 kes Apply Eric's scratch patch that moves a purged Volume to
2148 the RecyclePool. Question: how is RecyclePool set? what
2149 happens to the ScratchPool?
2150 kes Apply Eric's media patch that collects read/write media
2151 times as well as byte counts. This patch requires a
2152 simultaneous upgrade of the DIR and SD. Note, there
2153 should be some way to turn off timing. I'm not sure
2154 times are in Bacula units.
2155 kes Apply Eric's batch-insert patch.
2157 kes Update projects list.
2159 kes Implement Include/Exclude file lists in FD as dlists using
2160 the new dlistString class. This permits efficiently having
2161 large include/exclude lists and completes project Item 25.
2162 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2163 console is authorized to cancel the job. This fixes bug
2165 kes Modify SD so that the VolCatJobs medium record is updated
2166 at the beginning of a Job rather than the end. This
2167 fixes bug #775 where exceeding MaxVolJobs caused jobs
2169 kes Added a mutex around getting and setting Volume information
2170 so that multiple simultaneous jobs will single thread.
2172 Switch to using Subversion
2173 kes Remove src/pygtk-console/ from configure
2175 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2176 plus the entrypoints.
2177 kes Apply patch supplied that corrects debug print
2178 in canceling jobs for max run time. Supplied as
2179 part of bug #621, which was previously fixed.
2181 kes Test on job_canceled() and sd_msg_thread_done inside
2182 loop starting the message thread to avoid a race condition.
2184 kes Remove rl_catch_signal from console.c as it conflicted
2185 with the header definition. Fixes bug #765.
2186 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2188 kes Clarify some stored/acquire messages to indicate if the
2189 problem is with read or append.
2191 kes Fix memory leak with storage ids in cats/sql_get.c
2192 kes Terminate watchdog earlier to avoid reference to released
2193 memory -- reported by Jason Austin.
2194 kes Move closing the database from jobq.c to the director daemon
2195 termination routine. This fixes memory leaks for shadow jobs
2196 (i.e. migration jobs).
2197 kes Free up the unique jobid chain items in migrate.c. This fixes
2198 a memory leak problem.
2199 kes Convert some ugly looking for statements to use foreach_alist
2200 in findlib/find.c. This will facilitate converting the structures
2201 to use dlist (for large include/exclude lists).
2202 kes Fix a bug in the btree.c and btree.h routines, then rename them
2203 rblist and add them to be built in src/lib. Include some new
2204 methods written by Rudolf Cejka that make the code more readable
2205 (hides some of the ugly casting).
2206 kes Add set_next() and set_prev() methods which make the code much more
2207 readable. Also add a new dlistString class that facilitates storing
2208 strings in dlists. To be used in the large include/exclude lists.
2209 kes Make some trivial modifications to lib/tree.h that use rblist
2210 rather than dlist for storing the tree links. This was suggested
2211 by Rudolf Cejka. The result of this is that the restore tree now
2212 uses red-black binary trees rather than simple linked lists. This
2213 should give rather dramatic speed improvements for directories
2214 contining large numbers of directories/files (more than 10000).
2216 kes Fix maxruntime bug #621.
2218 ebl Implement the include JobID in spool file name project.
2219 kes Reorder projects file in order determined by Jan 2007 vote.
2220 kes Implement item #12 on project list -- quick release of FD by
2222 kes Fix open of SQLite3 db where user does not have write permission
2223 so that DIR does not crash. Fixes bug #761.
2225 kes Add back missing @ in Win32 Makefile.
2226 kes Change 'Device not configured to autolabel' from INFO
2228 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2229 which should restart an indefinite # of times.
2230 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2231 other DIR specifications.
2233 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2234 Fix path quoting in SQLite scripts.
2235 Fix problems with SHGetFolderPath.
2237 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2239 kes Fix Job restart on error bug that promotes an Inc to a Full
2240 backup. This should fix bug #755.
2241 kes Add qt-console and first cut of code.
2245 kes Fix Bacula->Documentation link on Win32 to point to index.html
2246 instead of bacula.html. Fixed bug #750.
2247 kes Return JobId in db_get_job_record() when JobId==0. This should
2249 kes Do not release source pointers when restarting a failed job.
2251 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2252 This *should* fix bug #747.
2253 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2256 kes Modify USTORE constructor to set an empty store_source string,
2257 and don't copy the store_source string in a cancel. Hopefully
2258 this will fix Arno's seg fault, bug #744.
2259 kes Add back code to disable conio in configure. Fixes bug #743.
2260 kes Correct the Options scanner in the FD to correctly handle
2261 SHA1 option, which was eating the next option. Reported by
2263 kes Add code to indicate when the SD is spooling, spool wait, and
2264 despooling as requested by Alan Brown.
2266 Version 2.0.0 released: 4 January 2007