1 Technical notes on version 2.5
6 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
7 examples/database/dbcheck.sql
10 dbdriver in bacula-dir.conf
12 enhancement to wait command: wait mount ...
17 remove reader/writer in FOPTS????
21 kes Fix migration SQL not to migrate a job that has not terminated.
22 This is a partial fix to bug #1164.
23 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
24 backup start time bug reported by Graham Keeling.
26 ebl Fix possible bug in cancel_job() with job that are not
29 kes Fix bat build for Win32.
31 kes Copy plugin link field into ffpkt.
33 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
34 It provides FileRegex in bsr files and code to collect regex
35 from the user during restore, an Allow Mixed Priorities feature,
36 and documentation for the above.
37 ebl Remove db berkeley from configure process
38 kes Do dirty check on hostname (Linux only) and if not resolvable
39 use localhost as default.
40 kes Increase vtape max block to 20GB.
42 kes Refactor restore code to create a close_previous_stream(). This
43 This may destabilize the source.
44 kes Implement planned startRestoreFile() plugin call.
45 ebl Remove missing Loaded information from status slots storage command.
46 ebl Fix Console command problem that cancels the job
47 kes Add more plugin restore debug code.
49 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
50 kes Rewrite plugin restore interface a bit to correspond to how Bacula
51 creates and writes to the restored file.
52 kes Add some DebugMessage() calls to the bpipe-fd.c program.
54 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
55 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
56 Bat; allow add and delete in place of mark and unmark.
57 kes Another attempt to fix the endRestoreFile plugin bug noted below.
59 kes Apply dbi driver patch from Joao.
60 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
61 Bastien Friedrich reported the bug.
62 kes Create plugin instance only when FD job starts.
63 kes Add new FD plugin event: bEventCancelCommand when
64 a cancel command is issued to the FD.
66 kes Add cmd_plugin flag to jcr so we can globally know if a
67 command plugin is running.
68 kes If command plugin running, do not attempt (for the moment)
69 to get Win32 extended attributes.
70 kes Ensure that proper Win32 flags are set in bfile packet
71 if plugin_bopen() works on Win32.
72 kes Remove generated src/plugins/fd/Makefile
74 kes Implement build and install of bpipe-fd.so plugin.
75 kes Rework the interface that passes packets to the plugin
76 so that the packet is started and ended by the packet size.
77 This allows the driver to do a sanity check.
79 kes Rework the pluginIO Bacula internal code to enable
80 proper handling of Win32 error codes from GetLastError.
81 kes Apply Joao's patch to regress startover_libdbi.
83 ebl Add -B option to dbcheck to get catalog information
84 kes Fix Win32 build to include new library function.
85 kes Remove some old reader/writer code.
86 kes Implement ./configure --with-plugindir=xxx
87 ebl Fix the mysql bug in the new accurate code
88 kes Improve plugin debug. Create plugin test.
89 kes Set main thread specific data to INVALID because it
90 has no jcr. This allows debug output to work correctly.
91 kes Add src/plugins/fd/Makefile to ./configure process.
92 kes Make first cut attempt to correct SQL that computes the current
93 Pool usage. This is to fix bug #1159.
94 kes Do a bunch of plugin cleanups for Win32 and more careful checking
95 of PluginDirectory and whether or not a plugin was found.
97 kes This code should fix the race condition that leads to a Director
98 crash at job end time when the job list is updated. This was reported
100 kes Add more plugin documentation and fix include of config.h for
101 Win32 build (I hope).
103 ebl Revert to htable instead of rblist
104 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
105 tree instead of htable.
106 ebl Use a dedicate DB link to compute and send the accurate list
109 kes Fix compile errors in filed/fd_plugin.c.
111 kes Remove all double quotes from SQLite creating script and
112 replace by single quotes as suggested by John Huttley.
114 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
115 It significantly improves the performance of dbcheck for
117 kes Fix bad debug code call in src/filed/accurate.c
119 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
120 output. Perhaps we really need to implement M_SAVED.
122 kes Fix bug #1156 FD crash during processing of Accurate data.
123 kes Tweaks to htable code to improved debugging and make names
124 a bit more meaningful.
126 ebl Remove time_t from update_stats()
128 kes Modify the license of the example plugin program to allow
129 it to be used by anyone for making a Bacula plugin.
130 kes Make apply_rp_codes() in bpipe-fd.c be static.
132 kes Remove Encryption and Accurate lines in vbackup output -- not used.
133 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
134 kes Add host name to items printed during dump.
135 kes Make Check File Changes default on.
137 kes Set the default FD timeout to 3 minutes (previously 30).
138 kes Apply Bastian Friedrich's weird spelling correction patch.
140 kes Always print Verify hash differences. Rename variable to make the
141 code slightly more readable.
143 kes Correct tests for MaxFullInterval as reported by
144 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
145 kes Fix MaxDiffInterval code as well.
146 kes Enable Win32 plugin load code in lib.
147 kes Make Verify code that computes disk checksums use the same
148 algorithm as backup when dealing with sparse files.
149 kes Attempt to run VSS on any systems newer than Vista -- should
150 make it work on Windows Server 2008.
151 ebl Change the new statistic implementation. Remove the UseStatistic
152 directive and add a 'update stats [days=...]' command. You can
153 now decide when copy job records from Job table to JobStat.
154 Statistics are much more accurate with this.
156 kes Fix SQL case problem that may cause the failure of DiskToCatalog
158 kes First cut adding SD plugins.
160 kes Add Slot if it is non-zero to writing bsr file after a
162 kes Change a number of bnet_fsend() into class method calls.
163 kes Begin audit of diff of 2.4 branch to trunk code.
165 ebl Fix the mysql creation script that double-created an
166 index of the same field on the Media table.
167 Add an index to on VolumeName to the Media table for mysql.
169 kes Another try at fixing Vbackup. It looks much better this time.
170 Disable file index sanity check in FD with value stored in
171 attributes record because with Vbackup the File Index gets
172 changed, but not the attributes record.
173 Enhance some debug code.
174 Fix handling of re-indexing records that are copied in Vbackup.
176 kes Made level_to_str() know about Virtual backup.
177 kes Set correct Virtual backup write pool.
178 kes Fix compile warning in new dbcheck port code.
179 kes Fix migration code broken by previous virtual backup fix.
181 kes Fix problem of Virtual backup not writing a sequential FileIndex.
182 kes Reset Virtual backup time/date to the value from the last backup.
183 kes Ensure that storage name is passed to SD on read.
184 kes Correct a problem with Level and Virtual backup, rework how
185 bsrs are printed in debug to use standard routine.
186 kes Apply patch from Chris in bug #1133 that provides alternate db port
188 ebl Remove catalog dependency from bcopy tool.
189 ebl Modify catalog scripts to have an easier packaging integration,
190 using default variables.
191 Make difference between SQLite3 and SQLite in db_get_type()
193 kes Apply most of changes in a patch from:
194 Michael Stapelberg <michael+bacula@stapelberg.de>
195 that allow the Bacula FD to compile on IRIX 6.5.
197 kes Apply patch from Bastian Friedrich that accepts a yes on a
198 delete volume command line.
199 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
200 job when reading from one autochanger and writing to another.
201 kes Minor tweaks (copyright dates convert to use method instead of bnet).
203 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
204 drives when no tape is mounted.
206 kes Add additional info to some SD messages.
207 kes Add fix supplied by Martin Simmons for turning off EOL character
208 in new console multi-command code.
210 kes Fix a Verify InitCatalog problem where in certain cases
211 a garbage filename may be entered in the verification database. This
214 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
215 sent in by Riyas Yoosuf.
217 kes Fix seg fault in Dir during estimate command with no level value
218 given. This fixes bug #1140.
220 kes Add message to migration job when the target job is already migrated.
221 This closes bug #1129.
224 kes Raise some restore debug levels.
225 kes Replace off_t by boffset_t where ever I found it.
227 kes Define a machine dependent ioctl request type for use with
230 kes When a migration job actually runs, re-check the Job record
231 and skip if the job is already migrated. This should
232 significantly reduce the problems with bug #1129.
234 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
235 turn off glibc checks that prevent getting good dumps.
236 kes Implement console 'wait mount' command. Doesn't yet work.
237 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
238 kes Break the do_swapping into do_unload, do_swapping, and
239 do_load. It is much more logical that way.
240 kes Implement a set_dcr_from_vol subroutine in acquire.c for
241 reading volumes. This allows the dcr to be refreshed after being
242 zapped when the wrong volume is mounted.
243 This should fix bug #1126 -- During multiple tape restore, bacula
244 does not ask for physical tape change, but rereads same tape
246 kes Apply patch submitted for bug #1107 with a small modification.
247 This fixes a bug where bcopy copied too many records.
248 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
249 This fixes bug #1124.
250 kes Make the default bat restore Pool be Any. This fixes bug #1118.
252 kes Remove debug statement that crashes the SD at the end of
253 a tape during restore. Fixes bug #1125.
255 kes Implement Win32 bat changes made to Branch-2.4
257 kes Tweak separator command in console to start disabled and
258 allow defining no separator character. Also make code a
259 bit more fault tolerant.
260 kes Make btraceback write the traceback to the working directory
261 before attempting to mail it.
262 kes Add a RFC to Projects.
264 kes Attempt to implement a kludge to make Qt work with bat
266 kes Setup rstorage correctly. Virtual backups are working.
268 kes Move setting JobLevel and JobType into a method, which should
269 allow completing Virtual Backups.
270 kes Fix verify jobs to work again.
272 kes Virtual Backup tweaks -- it is close to working.
274 kes Ensure that SD tried to mount a volume not in an autochanger
275 at least once before asking for operator intervention.
276 kes Make SD aware of Virtual Backup jobs.
277 kes Add VirtualFull for bat.
278 kes Changes to get read storage correct for Virtual Backup.
280 kes Remove old code from label.c
281 kes Split display_display_info() out of write_bsr_file()
282 kes do_vbackup_init() working -- i.e. bootstrap file built.
283 kes Change Bacula trademark owner from John Walker to Kern Sibbald
284 kes First non-working cut of vbackup
285 kes Correct FD heartbeat code to use volatile variable accessed by
287 kes Zero thread id with memset if on Win32 in case it is a struct.
288 kes If cannot create JobMedia record, continue to try to write eof
289 and clean up in block.c
291 kes Add code to interface OpenSSL to new Win32 pthreads code which
292 used a structure for thread_t.
294 ebl tweak bat for win32 compilation
296 ebl Remove tokyo cabinet from the source
297 ebl Update configure/autoconf to support berkeley DB
298 ebl Add a sort to db_get_file_list() to improve bsr construction time.
300 kes Add a mtx-changer.conf file that is not overwritten during
301 an upgrade. It fully configures the mtx-changer script.
302 kes Clear in-use bit on vol when unused while swapping.
304 kes Remove sleep at end of ./bacula
305 kes Clear hash packet for hardlinked files correctly. This corrects
306 a long standing bug where hardlinked files selected individually
307 would occasionally not be restored.
309 kes Apply Eric's patch to ensure that autoprune does not return
310 a Volume not in the autochanger unless requested to do so.
311 kes Correct bat restore display of multiple drives. This fixes
313 kes Do find_a_volume() each time an unload is done. This
314 fixes the failure of maxvol2-test.
316 kes Add some SD debug code.
317 kes Do find_a_volume() each time an unload is done.
318 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
319 and adds --with-db-port to ./configure.
320 kes Use Qmsg() in job.c watchdog callback.
322 kes Release main control rwlock if ABORTing.
323 kes Make watchdog connect timeout queue messages rather than sending
324 directly to avoid lock conflicts with the real thread.
325 kes Add const char in dbd.c to avoid compiler warnings.
326 kes Fix python compiler string warning. Note, IMO the GNU C++
327 compiler guys have made a *very* bad change to their compiler.
328 They now force all strings to be 'const' unless you explicitly
329 cast them, which is extremely ugly and ruins nice code as well
330 as creates a lot of useless work.
332 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
333 mt. This fixes bug #1116.
334 kes Add const in python files to reduce compiler warnings.
335 This may have to be backed out because of later compiler
337 kes Fix failure of 2drive-concurrent-test. Always read label;
338 clear_unload() only after drive is defined in acquire_for_read().
340 kes Generally clean up the manual tape loading code. The main
341 conceptual change is that when a volume is marked to be unloaded,
342 its volume name is retained, and it is only marked as unloaded
343 when either the autoloader says it is unloaded or another tape
344 is read on that drive.
346 kes Add debug code and refactor subroutine in stored/mount.c
347 kes Fix format problem in bscan output reported in bug #1105.
348 ebl Fix get_next_volume_for_append logic with autochanger
349 - use pruned volumes if found
350 - don't reset the inchanger flag after getting a recycled volume
352 Fix recycle_oldest_purged_volume to take InChanger flag in account
354 ebl Add mmap/unmmap implementation for tokyodbm under win32
356 kes Make first step toward eliminating globals from config
357 scanning. Also should be a workaround for FORTIFY_SOURCE
358 GNU C bug -- fixes bug #1042.
360 kes Apply duplicate job tests to restarted jobs.
361 kes Copy more data when restarting a job so that run
362 overrides are kept. This should fix bug #1094.
364 kes More word alignment cleanup.
365 kes Fix bug where SD did not ask operator if the device could not
366 be opened. Reported by Eric.
368 kes Add dbuser to DIR conf file (replaces user).
369 kes Add --with-db-password to ./configure
370 kes Fix regress to handle db_password.
371 ebl Add new 'status storage slots' that list autochanger
373 ebl Update vtape driver to compile only under Linux.
374 ebl Fix a bug when restoring with a wrong mediatype.
376 kes Eliminate ints from conf files and structures to avoid
377 word alignment problems
379 kes Fix bug reported by Scott Barninger where the bacula script
380 refers to scripts in the wrong directory. Needed to meet the
381 requirements of recent FHS location changes.
382 ebl Disable vtape for FreeBSD.
384 ebl Modify disk-changer to check if slot contains something before
387 ebl Fix vtape on win32 and debian.
388 ebl Fix autoselect patch (cause segfault).
390 ebl Fix autoselect option broken for a while. Fix #1089. Need some
391 work with StorageId to be able to use a particular drive in a
394 ebl Rename vtape to vtape.
395 ebl Update vtape driver.
397 ebl Modify vtape driver to avoid sparse file.
398 kes Add make clean of qt-source directory during ./configure
399 kes Store last block number written to tape in DEVICE and
400 use it for testing for correct last block on EOT.
402 Release Version 2.4.0:
406 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
407 This fixes bug #1095.
409 kes Add create_postgresql_database.sql to Win32 installer. Should
410 fix problem reported by Juilio Monteiro.
411 kes Get correct slot when auto unloading a device. This fixes bug
414 kes Fix multiple media restore.
415 kes Make DEVICE Slot private and access it via a method.
416 Allows better control over when it is set and cleared.
417 kes Fix possible seg fault if SQL error.
419 kes Add Martin's fixes to argument scanning for the estimate
420 command. This fixes bug #1093.
421 kes Add debug code to SD.
422 kes Fix renaming a Volume, which used the wrong Volume name.
424 kes If operator has rewind tape, print warning, release tape and
425 try once more. If tape is positioned somewhere, something went
426 wrong, so mark the tape in error and try once more. Previously
427 this error was fatal, now it produces an error message.
428 kes Ensure correct volume name displayed during restore
429 kes Ensure that Volume is mounted for restore.
431 kes Fix a few more Coverity reported problems.
433 kes Apply Allan Black's status dir job count patch.
434 ebl Add information about IMPORT/EXPORT slots in mtx-script.
435 kes Enhance a couple of SD debug messages.
436 kes Tweak unload flag setting and ensure it is set during swap.
438 ebl Fix #1091 about bad output in estimate command.
440 kes Modify autochanger locking to attempt to avoid race
442 kes Make sure device not busy before doing label command.
443 kes Display open() errors except when polling. Previously too
444 many were suppressed. This should fix bug #1070.
445 kes Fix Win32 reparse points. Bacula will not recurse into any
446 reparse point directory, including mount points, unless the
447 directory is explicitly mentioned at the top level (same as
448 with Unix). A file that is linked to another file will be
449 backed up -- much as Unix does for hardlinked files.
450 This fixes bug #1041.
452 kes Remove double quotes from ChangeLog and ReleaseNotes
453 kes Remove StorageId test when pruning and recycling (Eric's changes).
454 kes Remove old form of locking when getting volumes -- causes deadlock.
455 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
456 the name unique and to eliminate compile time error.
457 kes Add accurate.o to Win32 FD Makefile
459 kes Fix cats dll build on Win32 after db_update_job_end_record
460 calling sequence change.
461 ebl Switch to tokyo dbm instead of htable in accurate code
462 ebl Include tokyo dbm to bacula source tree
464 kes Fix buffer overruns detected by Coverity.
466 kes Tweak joblog display.
468 kes Implement --without-qwt
469 kes Fix layout of restore tree dialog
470 kes Add configure bat QWT libraries, so that bat can be built
471 with or without the QWT libaries.
473 ebl Add dummy tape driver for regression tests.
474 kes Make sure we unload the right slot when swapping.
476 kes Add debug times, reduce size of two-pool-changer test
478 ebl Tweak autoconf scripts for vtape
480 kes Improve SD reserve debug code.
481 kes Testing an improvement to free up volumes no longer in use.
483 kes Rework SD acquire for read to handle autochanger Volume
485 kes Implement regression that explicitly tests swapping a Volume
486 from one drive to another.
487 kes Enhance disk-changer to detect most error conditions.
488 kes Fix SD code so that it properly swaps a Volume between drives.
489 This fixes bug #1083.
491 kes Apply libdbi patch from Joao Freitas for regress and for
492 Bacula trunk. Regress now works with libdbi. Nice.
493 kes Apply .nobackup patch from bug #1077 submitted by
495 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
496 name into jobs cloned via the run directive.
498 kes Prevent a Volume that is being swapped from being freed from
499 the volume list. This will most likely fix, at least partially,
501 kes Fix strippath so that it does not get a buffer overrun and crash FD.
502 This fixes bug #1078.
503 kes Remove 50 millisec wait in SD that broke debugger.
504 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
505 that a job may run, counted from when the job was scheduled.
506 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
507 a job may block waiting for a resource, counted from when the job starts
508 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
509 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
510 that implements multiple commands per line in the console when using
511 readline. Modify the default to use a semicolon as the command separator.
513 ebl Fix SQL query in migration code.
514 ebl Make accurate mode with hash disk pass regression tests
516 ebl Implement first cut of accurate backup with hash disk.
518 kes Force unload of volume when wrong volume mounted in SD.
520 kes Fix bat seg fault at termination.
521 kes Add Bacula generated version to bat about box.
524 kes Experiment with allowing multiple read jobs.
525 kes Move final volume swapping code to DCR method and
526 call it from acquire_for_read().
527 kes When wrong volume is mounted during read, unload_autochanger.
529 kes Integrate the libdbi changes from Joao Henrique Freitas
531 kes Stop searching for Volumes in SD askdir if DIR returns the
532 same volume name twice in a row.
533 kes Close bat console windows first to eliminate error message
536 kes Tweak the swap Volume from one drive to another code so that
537 it now seems to work.
538 kes Resolve several problems with recycling that broke the new
539 code (these problems are in 2.2.9 as well).
540 kes Remove the volume lock when calling the sysop code.
541 kes Don't mark a reserved volume with no writers as unused otherwise
544 kes Rework class structures for VOLRES, DCR, and DEVICE to make
545 the method names a bit more logical, and for more logically
546 handling the responsibilities.
548 kes Remove redundant code in terminating the scheduler that just
549 causes a seg fault in many cases.
550 kes Cleanup releasing a volume and make it a DCR method.
551 kes Improve algorithm for detecting pre-reserved volume and
554 kes Tweak volume swapping code so it works.
555 kes Correct name overloading in mount.c
556 kes Replace released flag in VOLRES with reserved and add access
557 methods for the VOLRES class.
558 kes Prevent volume from being released while being swapped.
559 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
560 plugin that add %w (where) and %r (replace flag) editing to
562 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
564 kes Refactor parts of stored/mount.c
566 ebl Add sanity checks for VolWriteTime and VolReadTime
567 ebl Take care of bad clock changes while computing VolWriteTime
568 and VolReadTime. This should fix or limit #1066
569 kes Correct error string numbers in dird/catreq.c
570 kes Restructure reserving, acquiring, and mounting volumes. Calls to
571 autochanger are deferred for mount.c -- simplifes the code.
573 kes Do not prune any running job. It just fails the job.
574 kes Lock the volumes when changing dev->reserved_device and marking
575 the volume unused otherwise the device can get reserved by
576 another job before the volume is released, thus blocking it.
578 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
579 kes Fix bug #1063, reuse of freed ptr in list nextvol.
580 kes Release regex compile buffer in filed/job.c
581 kes Add proper type of const char in sql_create.c
582 kes Turn off debug in daemon termination routines
583 kes Move free_volume_list() before devices are freed in stored.c
584 kes Fix reference to uninitalized stack variables in bregex.c.
585 This should correct bug #1067.
587 kes Fix possible seg fault in SD when freeing a volume entry.
589 kes Implement unload_dev() before swap device.
590 ebl Add statistics prunning with option and menu
591 kes Separate unload_dev() from unload_other_device() in autochanger.c
593 kes Apply patch from bug #1069 that corrects spurious error messages
594 when ACLs enabled on SGI but no ACL exists.
595 ebl Fix small segfault in bacula-sd when debug level is 500
596 kes Modify run_program() and run_program_full_output() to use
597 call by reference for the results string. This corrects a long
598 standing problem where the address of the string may be changed
599 in the subroutine but not in the calling program.
601 kes Re-enable code to remember last volume mounted on a non-tape
603 kes Add patch supplied in bug #1068 that fixes a SD crash when using
604 a Virtual autochanger.
605 kes Generate correct JobMedia records during spooling/despooling when
606 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
607 <tih@hamartun.priv.no> for excellent analysis and testing.
609 kes Tweak hash algorithm for htable using Martin Simmons idea
610 for doing a circular shift.
611 kes Remember what volume is in VTLs (previously turned off for
613 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
614 pointed out some problems in creating JobMedia records during
615 spooling with concurrent jobs. Fix the problem by updating the
616 start file position before despooling and generate a jobmedia
617 record at the end of despooling.
619 kes Fix handling of JobMedia records during spooling and when a
620 Volume is changed without actually writing data to the Volume.
622 kes Rework certain SD locking based on gdb tracebacks of deadlocks
623 sent by Eric. This code now uses only the volume_lock() rather
624 than the reservations lock when at EOM and acquiring a new
626 kes Ensure only one exit point in several subroutines.
628 kes Implement bsock code to permit locking. Use the new code in Verify
629 in the FD to prevent the heartbeat thread from disrupting the Verify
630 data sent to the Dir.
631 kes Modify SD locking to eliminate locking the reservations system from
632 outside the system. Use the volume lock when getting media data
633 and reserving a new volume at end of media.
634 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
635 when SD starts are not locked into place.
637 kes Fix error compiling runscript code on 64 bit machines.
638 kes Tweak Win32 mount point code.
639 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
640 cleared giving bad file estimate).
641 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
644 kes Keep Schedule run lists in order as suggested by
647 kes Implement autostart scripts for Debian.
648 ebl Implement upgrade catalog scripts.
650 ebl Apply jobstat patch for long term statistics. Have to implement
651 purge stats command and upgrade scripts.
652 kes Fix mtx-changer.in for broken Debian mt program.
654 kes Fix large number of JobMedia records reported by Eric Bollengier.
656 kes Apply doc fix from bug #1062.
657 kes Resolve crash and improper restore wx-console Win32 restore
658 GUI. Fixes bug #1065.
659 kes Update Win32 wxWidgets to latest version.
660 kes Attempt to do correct handling of Win32 mount points. Should
662 kes Fix Win32 FD backup/restore memory leak due to improper termination
663 of BackupRead/Write. This fixes bug# 1038.
665 ebl Reduce memory usage for accurate backup, working only with ctime
666 and mtime. (not all Lstat field)
667 About 40MB for my Linux system (400.000 files)
669 kes Add dcr->reserved_volume flag that allows us to release a volume
670 even if it is not vol->released. This allows maxvol2 to work when
671 Volumes expire and we are already writing to the device (i.e. a
672 volume is pulled out from under us by another job terminating after
673 we reserve the drive).
675 ebl Permit multiple command/console per runscript definition.
676 RunScript { command = /bin/true ; command = /bin/false ... }
677 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
678 (restart an application) just after the VSS snapshot on windows.
679 kes Don't zap dcr values during release_volume() as they might
680 have the next Volume to be mounted.
681 kes Fix AIX prototype.
683 kes Second cut of drive switching during backup.
686 kes Update Win32 version of wxWidgets to most recent version.
687 kes Tweak Copy job details.
688 kes Rework dir_find_next_appendable_volume to make a bit more effort
689 to find a suitable volume before giving up.
691 kes Make ask_sysop_to_create... to return if waken from wait.
692 This helps get out of blocked conditions.
693 kes Experimental implementation of switch_device in reservations.
694 kes Implement FD version to allow easier protocol changes.
695 kes Add Plugin Options string -- not yet passed to FD.
696 kes Implement PluginOptions ACL.
698 kes Attempt to correct problems with restores with autochangers and
699 use counts going negative
700 kes Rework SD status command and implement API for bat. Implements
701 header, runing waitreservation, devices, volumes, spooling,
702 and terminated status keywords.
703 .status storage=xxx <keyword>
704 kes Clarify TLS error message by adding double quotes around name.
705 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
706 kes Pass jcr to tls routines so debug messages can be handled better.
707 kes Rework jobq resource allocation code, and possibly fix a bug
708 that caused reference counts to get out of sync.
710 kes Rename fd/dir plugin to use Bacula standard underscore.
711 kes Plugin work -- bring dir up to fd level.
712 kes Start implementation of VTL code
713 kes Fix Win32 build after adding new cats subroutine.
715 kes First cut at Duplicate Job implementation.
717 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
718 kes Start PluginOptions string, and refactor a bit of ua_run.c
719 ebl Apply Allan patch that permit to reset recyclepool.
721 kes Test patch -- possible fix or improvement for bug #1053
722 kes Refactor FD and SD status commands to permit new API code in
723 SD, and to fix Win32 build.
724 kes Win32 build is now working.
726 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
727 some ideas in patch from Scott Bailey.
728 kes Begin implementation of duplicate Job control.
729 kes Fix some of Win32 build after recent additions.
730 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
731 which causes the FD to detect whether or not the OS has the
732 honor no dump bit (*BSD systems), and if so, to skip backing up
733 any file with this bit set. The feature is enabled by setting
734 'honor no dump flag = yes' in the Options section of a FileSet.
736 kes Correct po warning message with datarootdir
737 kes Implement more code in dird.c to put configuration parsing in
738 a class rather than use globals.
739 kes Restructure SD status command for implementation of bat API
742 kes Suppress incorrect 'Will not descend from x into y' messages.
743 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
744 daemon globals used by parser.
745 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
747 kes Fix free of plugin_list when none exists.
749 ebl Apply accurate project patch.
751 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
752 on non-mempool object)
753 kes First cut of converting FD .status to work with bat API.
755 .status client=XXX header
756 .status client=XXX running
757 .status client=XXX terminated
758 kes Implement first cut of Copy Job.
759 kes Implement Catalog in Pool resource. It overrides catalog specified
760 in the Client resource.
762 kes Apply patch (with some difficulties) from Joao Henrique Freitas
763 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
765 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
766 ftruncate() actually works. In the case of some (cheap) NAS devices,
767 it does not, and so recycling NAS Volumes does not work. The code
768 simply unlink()s the file, then recreates it. This fixes bug #1011.
770 kes First incomplete cut of big malloc blocks for htable.
771 kes Tweak plugin code.
773 kes Plugin debug code + tweak a couple bat dialog layouts
775 kes Fix creating first JobMedia record during Migration to include
776 proper index. This caused slow restores of migrated jobs.
777 kes Temp fix to plugin name file_index.
778 kes Bacula backed up and restored a MySQL database.
780 kes Implement plugin restore.
781 kes Implement parsing of db_driver to give db_type index.
783 kes First cut of plugin restore code.
784 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
785 and do not strip paths on symbolic links.
786 kes Set catalog backup database and user name from values specified on
787 the ./configure line.
788 ebl Fix #1031 about wrong pool source information in job report.
791 kes Remove a redundant jcr argument to find_files, match_files, and
793 kes Implement '.status dir header|scheduled|running|terminated' that
794 prints the requested status section. With the exception of the
795 header, the other reports have fields separated by tabs (\t).
797 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
798 a resource embedded run command to find a since time if no explicit
799 since time was supplied on the command line.
800 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
801 that updates the state file at job termination time in addition to
802 when the daemon terminates.
804 kes First version where a plugin did a backup.
805 bpipe-fd.so created a backup file, wrote a test
806 string to it, and Bacua could restore this fabricated file.
808 kes Implement DB Driver = string for the DBI driver.
809 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
810 kes First cut of code for loading Win32 plugin dlls. Implement
811 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
812 and implement a dlfcn.h file based on opengroup's definitions of
815 kes First cut plugin directives.
817 kes Apply patch from bug #1049 to prevent stripping the path on a
819 kes Attempt to fix bug #1047 where stripping a path corrupts the
820 heap. Waiting for feedback.
821 kes Correct the Mount message not to suggest labeling a new tape
822 when doing a restore. Submitted by email by John Stoffel.
823 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
824 FD by using casting. Reported in bug #1042.
826 kes A bit of crypto cleanup. More later.
828 Release Version 2.2.8
830 kes Apply patch from Martin to correct bug #1040, bscan sets existing
832 kes Fixed important spelling error in doc -- bug #1045.
834 ebl Fix bextract to be able to extract non-portable Win32 data to
836 kes Move initialization of read/write res lock earlier in the code.
837 This fixes the crash with a null conf file. This fixes bug
839 kes Redefine CURES in lib/parse_conf to be URES and move it all
840 into lib/parse_conf.c -- this responds to bug #1042, but does
841 not fix it. The fix is not to compile with FORTIFY_SOURCE.
842 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
843 the trunk SVN. I don't think this was reported as a bug.
845 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
847 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
849 kes Add DataDespooling and DataCommitting status (committing is
850 the last despooling).
851 kes Finish implementation of new reservations code noted below.
853 kes Fix bsnprintf for float point numbers. I broke recently when
854 parameterizing some variables. This fixes bug #1036.
855 kes Undo recent reservations changes ... will apply them later
856 when they work better.
858 ebl Fixes #1034 which cause mysql to hang the connection after 8h
859 ebl Change default statistics target of filename.name and path.path
860 fields for PostgreSQL. This speeds lookup by indexes. Thanks
862 kes A few more tweaks to new reservation code. Make sure to clear
863 vol released flag when retaking volume. When reading label and
864 label is bad mark volume unused. When recycling, mark volume
865 unused so it can be renamed.
867 kes Fix reserve_volume() so it doesn't release a volume in use
868 (i.e. a volume entry not marked released). This should be
869 the last part needed to fix bug #1018.
871 kes Move Heartbeat documentation from Job to Director resource.
872 This fixes bug #1033.
874 kes Fix existing switch drive SD code to call autochanger to release
875 any old volume. This must be done to keep the autochanger from
876 releasing subsequently newly reserved volumes in doing a close().
877 This should fix bug #1018.
878 kes Fail if attempting to get console input in batch mode. This
879 should help fail RunScript console commands that are incomplete.
880 kes First cut implementing switch_drive() in SD (not actually called).
882 kes Implement first cut running console commands in a RunScript.
884 ebl Fixes bug #1028 where 'Selection Type' option was not usable
886 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
889 Release Version 2.2.7
891 kes Add new free_tls() entry point so that Win32 builds.
892 kes Fix compile warning in src/lib/util.c
893 kes Fix entry point for edit_job_codes() so that Win32 builds.
894 kes Fix seg fault Frank Sweetser reports in regression testing
895 on his systems. The problem was that the original author of
896 bsnprintf.c did not take into account the side effects of
897 using ++x in the argument to a #define.
898 kes Make SD protocol backward compatible with version 2.2.x.
900 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
901 because Bacula no longer restores sockets.
902 ebl Always use ignorecase fileset option on win32 FD.
904 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
905 that implements double quoting include names in conf files,
906 and also allows piping input by having the first character
907 be a vertical bar (|).
908 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
909 that implement %f in RunScripts to pass the FileSet name.
910 kes Skip leading | when lex input comes from a pipe as suggested
911 by Michael Stapelberg <michael@stapelberg.de>.
913 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
914 Nerijus Baliunas <nerijus@users.sourceforge.net>
916 kes Implement Plugin Directory and plugin events.
918 kes Implement a security enhancement: TLS authentication but no
919 encryption. Enabled by setting 'TLS Authentication = yes'.
920 Note when this is on, TLS encryption is turned OFF!
922 kes This patch corrects a problem where the maximum concurrent storage
923 jobs counter gets out of sync during restore jobs causing jobs to
924 'wait on max Storage jobs'. This patch fixes bug #1009.
926 kes This patch fixes bcopy so that it produces correct Volumes.
928 kes This patch eliminates spurious output to the console during a VerifyVolume
929 job that contains encrypted data. It fixes bug #1024.
931 kes This patch prevents the 'status dir' command from trying to use a scratch
932 volume and possibly moving it from one pool to another. This patch fixes
935 kes Add new include to postgresql.c suggested by Marc Cousins so
936 that it compiles correctly with pgre version 8.3.
938 kes Fix --archivedir addition to configure. Replace it with
939 --with-archivedir in configure.in This fixes the regression
941 kes This patch fixes bug #1012 where the job is canceled because
942 of Max Run Time exceeded when the job has not yet started.
944 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
945 one 'part' to write. Instead of each part being stored on disk,
946 written to DVD, then deleted from disk, all parts are written to disk,
947 and only the last is written and deleted from disk.
948 kes This patch fixes the status command to include the formating string for
949 JS_AttrInsterting. It fixes bug #1021.
950 kes This patch should fix the Mac OS X build problem on the latest
951 Darwin, where sys/types.h was not included correctly (apparently
952 due to a change in the Mac headers). The solution was to explicitly
953 ensure that it is defined for the ./configure.
954 This patch also has a rebuild of configure that includes the Debian
955 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
956 kes This patch should ensure that queued messages to the console are
957 displayed as soon as possible. It should fix bug 1007, but has been
958 reported not to work.
960 kes This patch fixes the infinite loop when trying to increase the
961 maximum number of volumes in a Pool during the add command.
962 This patch fixes bug #1008.
964 Release Version 2.2.6
966 db Remove extra data on estimate command in joblist for bat.
968 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
969 really change anything, but is the beginning of doing it *right*.
970 To do it completely right the LastWritten date must be passed to
971 the SD, but it is not yet done.
972 kes Minor tweaks to some bat restore SQL.
973 kes This patch fixes bug #1003 where putting the message output from
974 a Verify job into the catalog results in a recursive loop. The problem
975 seems to show up only with postgresql (to be verified).
976 kes Correct %x to %p in postgresql debug statement.
978 kes Fix bug #942 where lots of emails where generated when the heartbeat
979 interval was low and Bacula wanted a different tape from the one in
982 ebl Add new SD despooling attributes and Dir inserting attributes
983 job status codes in the catalog (Status table).
985 ebl Use qmake-qt4 instead of qmake when available (debian system).
987 kes Add a security warning to src/cats/make_catalog_backup.in indicating
988 that passing the password via the command line (arg 3) is insecure.
989 This responds to bug #990 (it doesn't fix it).
991 kes Set default debug_level to zero. This corrects bugs #991 and #993.
992 kes Fix a crash in bat when it cannot connect to the Director for example
993 if the Director is not running.
994 kes Remove redundant INDEX (JobId) from File table in the trunk.
996 kes Make explicit exception to GPL in LICENSE to permit linking
997 the Win32 FD with Microsoft VSS code.
998 kes Apply the Solaris package patch from
999 Masopust, Christian <christian.masopust@siemens.com>
1000 kes Apply the patch to optionally add a timestamp in the debug output
1001 submitted by Mariusz Czulada <manieq@wp.eu>.
1003 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1004 backend (sql_strerror). Fixes bug #989
1006 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1007 It applied with no problems.
1008 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1009 awk are on the path.
1010 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1011 since the status is returned on stderr on Solaris.
1012 kes Activate Close button on tray-monitor window. This fixes
1014 kes Check for NULL item in parse_conf.c before calling it. In the
1015 case of Device, there is no item and this caused a seg fault when
1016 Device appears in the conf file.
1017 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1018 avoids pulling in config.h multiple times in some new code.
1020 kes Fix spurious warning message printed when creating a volume with
1021 a LabelFormat. This fixes bug #976.
1023 Release Version 2.2.5
1025 kes Add JobId in place of Job name in all the Jmsg() output.
1026 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1028 kes Make maxvol-test and new more strict maxvol2-test work.
1029 kes Print JobId in all Jmsg() job output.
1031 kes Add new SD despooling attributes and Dir inserting attributes
1032 job status codes. This fixes bug 961.
1033 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1035 kes Fix doc issue. This fixes bug #963.
1036 kes Fix listing performance problems in bat. Pointed out by
1038 kes Remove old debug code.
1039 kes Fix bat code that tests for Win32. This should fix bug #968
1040 kes Query 5 list wrong Vol after migration. This fixes bug #960
1042 ebl Fix #969 where user can't change Replace option in restore menu.
1044 kes Save jcr in thread specific data (tsd) for each thread.
1045 kes Make Dmsg() print JobId as -%u.
1046 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1047 for the thread if it exists.
1048 kes Remove old reservation debug jid code.
1049 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1050 ebl Add an option that permit to specify spool size in job
1051 definition. (Applying patches/testing/spoolsize_per_job.patch).
1052 You must upgrade SD and DIR at the same time.
1053 dvl Add new configuration item --archivedir
1054 dvl Adjust regression tests to use tmp not /tmp. This will allow
1055 multiple concurrent runs of the regression tests.
1057 kes Fix race condition that drops final block written to volume.
1058 This happens in rare cases with multiple simultaneous jobs
1059 when the Volume fills. This fixes bug #964. May be related
1060 to bug #935 and possibly #903.
1061 kes Eliminate more strerror() and replace with bstrerror().
1062 kes Remove BSD getopt and replace with unrestricted IBM version.
1063 kes Fix Win32 build for changed calling sequences.
1064 kes More tweaks to the mount volume routines to get everything
1065 right. Changed variable name from find to have_vol, which is
1066 much easier to understand.
1067 kes Enhance btimer debug code.
1069 kes Fix FD->SD authorization failure, which was due to spurious
1070 wakeups from a pthread_cond_timedwait(). Simply check the
1071 predicate before continuing. This fixes bug #953.
1072 kes Add const char where needed (more to do). Remove temp debug code.
1074 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1075 kes Don't overwrite error message in check_tables_version.
1077 kes Unlock batch insert tables with same calls used elsewhere.
1078 kes Allow starting 59 jobs a second.
1079 kes Make SD session key more random.
1080 kes Add retry for SQLite opening db if it fails. Probably helps
1082 kes Suppress extra error messages during batch insert failure.
1084 kes Add jcr to timer packets so if killed message can be sent to job.
1085 kes Add JobId to all Dmsg() output.
1086 kes Put some FD auth code on dbglvl rather than fixed.
1087 kes Return insert attributes error message in db msg buffer to avoid
1088 false error messages. Helps fix bug #966.
1089 kes Separate batch init error messages. Probably helps fix bug #966.
1090 kes Make SD code that contructs attribute insert check string lengths
1092 kes If Dir gets an error during inserting attributes, cancel SD.
1093 This reduces unnecessary error messages.
1095 kes Correct search boolean for getting Volume info
1096 ebl Cleanup batch insert code. Probably fixes bug #965.
1097 kes Back out one small change to the reservation system (reserving a volume).
1098 kes Rework how a Volume is mounted. It is now much more intelligent and
1099 will always attempt to use any mounted volume if possible and reduces
1100 calls to the Director asking about volumes.
1102 kes Turn off some code when batch insert not enabled.
1103 kes Edit FD name in connect error messages.
1104 kes Rework the reservation system to take into account that the Director
1105 might give us a Volume that is different from the current one being
1106 used, and to ensure that we don't exceed Maximum Volume Jobs.
1107 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1108 fatal error with multiple jobs running'
1109 kes Add more debug code in reservation system.
1110 kes Implement maxvol-test to check bug #947.
1112 kes Add code to handle tray monitor separated from Win32 FD.
1113 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1115 kes Add missed return in fixing verify bug -- trunk only.
1116 ebl Fix a command parser issue causing a director segfault.
1117 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1118 This fixes bug #954.
1119 kes Increase the max block size to 4MB fixes bug #957.
1120 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1121 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1122 is not properly mounted (recognized) during a poll.
1123 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1124 Job that has differences reports Verify OK.
1125 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1127 ebl Add an option to operate on all pools with update vol parameters.
1128 This complete the project 20. Patch from Nigel Stepp.
1129 ebl Add history support to bconsole when using readline.
1130 Using Ctrl-D to exit doesn't update .bconsole_history
1131 kes Modify new volume algorithm to use max MediaId for generating next
1132 volume number rather than the count of Volumes. This should essentially
1133 eliminate the failure rate if some volumes were deleted. Bug #921.
1134 kes Begin implemention of Optimize Job Scheduling.
1135 kes Implement restore callback that Dirk and I agreed on for bat
1136 restore. This fixes bug #928. Restore of backup of zero files fails.
1137 kes Fix SQL Catalog logging which broke with new db_escape_string
1140 Release Version 2.2.4
1142 kes Fix bacula_cats.def for new db_escape_string().
1143 kes Increase size of name string when FD making connection to SD.
1144 May fix bug #953. FD->SD connection failure.
1146 kes Add code to help Dan debug 2drive-incremental-2disk test.
1147 kes Add code to try to fix bug #908.
1148 kes Add waits to multiple exit detection code to try to force pid
1149 file to always be deleted.
1150 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1151 This fixes bug #950.
1152 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1153 trying to switch drives by checking for blocking before unblocking.
1155 kes Cancel storage daemon in all cases where FD reports error. This
1156 should fix virtually all cases of bug #920.
1157 kes Fix db_escape_string() for MySQL which did not compile.
1159 kes Fix error message that was clobbered when Dir tells SD it does not
1160 have write permission on Volume. This should fix a minor point
1161 in bug #942, but not the main problem.
1162 kes Add code to cancel job in SD if FD connection fails. This should
1164 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1165 dvl Pass jcr and db into db_escape_string() to enable better escaping
1167 kes Fix migration code to get correct Volume name with multiple volumes
1168 by skipping |. Fixes bug #936.
1169 kes Implement patch supplied by Landon to fix bug #944 where using
1170 TLS with bconsole uses 99+% of the CPU.
1171 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1173 kes Move patches into patches directory.
1175 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1178 ebl Using 'm' in bconsole will show messages like before,
1179 and not memory usage.
1180 kes Fix bug #935, and probably also bug #903 where files were not
1181 restored. MediaId was not properly set in JobMedia record after
1184 kes Suppress chown and chmod error messages if the FD is not running
1187 kes Apply Martin Simmons' patch that should turn off the new API usage
1188 when batch insert is turned off allowing building on older
1190 kes Add ./configure search in qwt-qt4 for qwt package
1192 kes Bacula is now free of 3rd party GPL copyrighted code!
1193 kes Remove idcache.c
1194 kes Add guid_to_name.c/h which replace idcache.
1195 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1197 ebl Detect if new PosgreSQL batch insert API is present.
1198 kes Correct incorrect mempool call causing Director crash. Occurs on
1199 systems without va_copy().
1200 sb Update spec files for 2.2.1 release
1202 kes Fix memory pool call in ua_output.c. bug #934.
1203 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1204 Add test program to fnmatch.c
1206 kes Integrate patch to README.vc8 from
1207 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1208 edit it to get it into Unix patch format.
1209 kes Implement mkpath.c to replace old FSF makepath.c
1211 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1213 Release Version 2.2.1
1215 kes Update POTFILES.in
1216 kes Cleanup a few underquoted AC_DEFUNs in configure
1217 kes Apply patch from Martin Simmons that adds a test for va_copy to
1220 kes Fix bug #921 by increasing the number of tries to create a new volume
1222 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1223 can be called multiple times. Implement a version for machines
1224 without va_copy() that gets a big buffer.
1226 kes Integrate more portable zone offset code into bsmtp.c
1227 Submitted by Attila Fülöp.
1229 kes Fix bad SD->FD return status reported by
1230 (James Harper) <james.harper@bendigoit.com.au>
1231 ebl Fix a bug in read_close_session which return random status
1232 thanks to James Harper
1234 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1235 and directory names during restore of single file/directories.
1236 kes Add sanity checks to .sql command when string is empty. Hopefully
1237 that will resolve Dirks Director crash.
1239 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1240 in the bsmtp chat subroutine when debug is >= 10.
1242 kes Fix Director crash when running bat SQL queries.
1243 kes Add David's notes on Item 8: Copy pools.
1245 kes Rework projects file to be current and ready for a vote.
1246 kes Enhance lex scanner error message.
1248 kes Tweak LICENSE file to mention BSD code.
1249 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1250 if specified on the ./configure.
1251 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1252 This class is intended to allow us to open a second bsock to the
1253 Director while in the restore subdialog.
1255 kes Fix configure to create bat Makefile before creating dependencies.
1256 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1257 kes Add a tooltip to the tray monitor.
1258 dvl Set the Director's PID file before dropping privs. This fixes
1261 kes Update AUTHORs file
1262 kes Increase the default max concurrent jobs to 20 in FD and SD to
1263 correspond with the default .conf files.
1264 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1265 some different, of the same file created by RN when porting the
1267 kes Rearrange some of the Win32 directories and the placement of the files
1269 kes Set DEVELOPER flag in version.h
1271 ========================================================================
1272 Release Version 2.2.0
1274 kes Apply a second doc patch from Marc.
1275 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1276 improves the tips section that discusses how to setup multiple
1279 kes Update bat README file.
1280 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1281 corrects a typo in the Recycle status check in db_find_next_volume().
1282 This will probably fix a number of annoying problems with multiple
1284 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1285 bnet calls -- no functionality change.
1287 kes Modify the Verify output to specify if files are missing on
1288 the Volume(s) or disk. Fixes confusion in bug #916.
1289 kes When more than one Volume is read in a migration job, the last
1290 Volume bytes reported are from the last read volume rather than
1291 the last written volume. Fixed. This fixes bug #910.
1292 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1293 It previously printed New Recyle flag is: no. This fixes bug
1296 kes Correct seg fault when switching tape drives during restore.
1297 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1298 be used until after 2.2.0 release.
1300 kes Remove fnmatch() in SD that permitted wild card specifications.
1301 This fixes bug #914.
1303 kes Fix %g in filename returned by SQL for browse tree reported by
1305 kes Fix configure so that it puts config.out in the cwd rather than
1307 kes Attempt to fix the locking problem reported by Eric in bug #906.
1308 kes Make berrno class to leave errno unchanged after constructor call.
1309 kes Make bnet_server use the heap rather than the stack to allocate
1310 its socket fd pointers to avoid a crash at termination. Problem
1311 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1313 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1314 and putting it in depkgs-qt along with Qt4.3.
1316 kes Rework code in acquire.c that switches drives for reading when
1317 the Media Type does not match. This should fix bug #906
1319 ebl Fix a director segfault during job setup #907
1320 kes Correct seg fault in postgresql when first operation returns no
1321 rows. Fixes Dirks File browser problem seg fault with bat.
1323 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1324 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1327 kes Implement PopUp YES/NO dialog for bat.
1329 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1331 kes Correct RunScript to terminate job in FD on failure.
1332 kes Change abort_on_error and AbortJobOnError to fail_on_error
1333 and FailJobOnError in RunScripts.
1334 kes Minor tweaks of code formating in RunScripts, principally to
1335 avoid depassing 80 columns.
1337 kes Eliminate one #ifdef Win32 in bsmtp
1338 kes Implement grow tool to grow a file for testing very large databases.
1339 kes Add big-vol-test to test Bacula seeking with > 5GB.
1342 kes Modify find_next_volume() to return all values in Media record.
1343 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1347 kes Update Release notes
1349 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1350 Warning, in previous beta version, all media get from scratch keep their
1353 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1354 This should fix bug #842. Made a note to look at removing the temp
1355 files at the end of the install.
1356 kes Add ability to mount and unmount a file device providing it is
1357 marked as being removable and has the appropriate mount and unmount
1358 commands defined in the Device resource. This fixes bug #830.
1359 kes When applying a storage override, release all previous storage
1360 definitions rather than just prepending the new storage.
1361 This should prevent a good deal of confusion.
1363 kes Implement ./configure search for qwt libraries.
1365 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1366 Win32 FD. This should fix bug #893.
1367 kes Remove an unnecessary beep in Win32 init code.
1368 kes Update copyright dates in Win32 executable about boxes.
1369 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1370 code with a BSD getopt.c and getopt.h.
1371 kes Remove sched.h from the Win32 compat directory -- not used.
1372 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1373 need to shut it down, do it through the services panel or the command
1375 kes Remove some inappropriate Bacula FSFE copyrights.
1376 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1377 kes Fix regress config non-portable test as pointed out by
1378 Florian Heigl <florian.heigl@gmail.com>
1379 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1380 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1382 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1383 Reported by Frank Sweetser.
1387 kes Fix client-only build.
1388 kes Integrate client-only fixes for bsys (initgroups) and conio from
1389 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1390 kes Make arguments to get_scratch_volume() in same order as other
1392 kes Rework the prune_volumes() subroutine so that after purging and
1393 no volume found in desired pool, it will check for a scratch
1394 volume. This prevents recycling the whole scratch pool.
1395 kes Add code to status storage to print boffset_t (largefile support).
1397 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1398 kes You now need a --with-qwt=<dir> to be able to build bat.
1399 kes Update src/win32/cats/bacula_cats.def to include the new
1400 db_get_query_dbids() call on Win32.
1402 kes Correct a problem when selecting a scratch volume and moving
1403 it to another pool that lost some columns.
1404 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1405 kes Enhance Autochanger error messages to include Volume and device name.
1406 kes Rework prune_volumes() code to take account of InChanger flag,
1407 and to handle recycling volumes going to the Scratch pool and
1408 current pool because the RecyclePool directive.
1409 kes Implement a better and more efficient db_get_query_dbids() to
1410 handle creating and passing back a list of DBIds.
1414 kes Start work on new more efficient DBId subroutine. First use
1415 will be for recycling volume to Scratch inchanger.
1416 kes Increase number of JobIds in pruning from 1000 to 10000.
1417 This to be replaced by above routine.
1418 kes Begin implementation of building Qt4 on Win32.
1419 kes Correct typo in fix I added for bad TLS shutdown.
1420 kes Pull 2.0.3 patches into patches directory.
1421 kes Update Release notes. Include qt-console in line count.
1422 kes Update Projects file.
1424 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1425 bug in migration code where a job that spanned two volumes
1428 kes Implement new BST_DESPOOLING blocked state. Change from locking
1429 during despooling in SD to blocking. This means that other threads
1430 can work with the device structure, in particular the reservations
1431 system while despooling.
1433 kes Fix return in reservation message queue that missed clearing
1434 the jcr lock (implemented 26Jun07 below).
1435 kes Rename a number of dev methods to make locking function names
1437 kes Document locking in lock.c. Move lock structures to new file
1440 kes Move reservations message lock to lock jcr only this
1442 kes Move main SD locking code into lock.c (new file).
1443 kes Update Win32 build to include lock.c
1447 kes Dirk committed the qwt library code for drawing graphs in bat.
1448 kes Tweak install of qwt so that it is integrated with ./configure.
1450 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1451 out by Eric (my typo).
1452 ebl Fix configure.in to get batch mode enable
1453 kes Return correct string from authenticate.cpp in bat when connecting
1455 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1456 spurious line drops when using TLS.
1457 kes Do not file reparse points when restoring a file that already
1460 kes Implement Windows reparse points -- similar to directories, but
1461 we do not descend into it. This is a first cut. They seem to
1462 be backed up, but restore is not yet tested.
1463 kes Remove restore_blocking in tls code when shutting a socket to leave
1464 it in blocking mode. Hopefully this will fix the encryption bug
1465 reported by Frank Sweetser.
1466 kes When opening a file for backup, tell the OS that we are going to
1467 read it sequentially -- optimization.
1468 kes Change variable names in authenticate_director() to not conflict
1469 with member names in bat. Caused great confusion with compiler,
1472 kes Queue openssl error messages in case of comm problem.
1473 kes Do shutdown() call if socket terminated.
1474 kes Remove some duplicated code in tls.c
1475 kes Move more of the bsock member variables into private and access
1477 kes Add Frank Sweetser's tls-test to the regression suite.
1479 kes Add Swedish sv.po file
1481 kes Don't print clock skew message in FD if less than 3 seconds diff.
1482 kes Add a bit of VSS info to status client.
1483 kes Implement a first cut of Vista VSS, using Win2003 code.
1485 Release: 2.1.20 beta
1487 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1488 loaded tape but uses first drive).
1489 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1490 This was indeed a Win32 issue.
1492 kes Simplify search of autochanger for in-use Volume.
1493 kes Fix exit condition of check for in-use volume. kes Remove
1494 inappropriate my_postgresql_free_result() in db_close()
1496 kes Fix bad return in FD when encryption signature not found.
1497 Probably caused a crash.
1498 kes Inhibit missing encryption signature error messages for
1499 file types where no signature computed.
1500 kes Correct inverted check on autochanger in reservation system.
1501 kes Tweak debug code in autochanger reservation.
1503 kes Add some additional locking in the cats directory in subroutines
1504 that modify packet variables called from batch insert.
1505 kes Rework how dcrs are allocated. new_dcr() can now be called
1506 with an existing pointer, and it will simply clean it up.
1507 This allows the reservation system to test various different
1508 devices, and will permit easy device changes.
1509 kes A bunch of changes all over to handle new new_dcr() calling
1511 kes Work more on the Volume management in the SD. Remember Volumes
1512 for tape drives and for autochangers (even virtual disk changers).
1513 kes When looking at the Volume list to reserve a drive, handle
1514 autochanger names correctly by interating through the changer
1515 devices. Also call the Director to see if a Volume is suitable
1516 for the current job.
1517 kes Fix some bugs in bscan. Make sure all media records are written.
1518 Make sure that valid JobMedia records are written for disk files.
1519 Previously they were completely wrong.
1520 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1521 that the URLs don't change and so that the developers will all
1522 work off the same copy. Rebuild from scrach.
1523 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1525 Release: 2.1.18 beta
1527 kes Fix seg fault in FD from incorrect digest size.
1528 kes Fix argument to non-OpenSSL crypto.c subroutine.
1530 Release: 2.1.16 beta
1532 kes Remove a few malloc()s from the encryption code.
1533 kes Use the class calls to bsock in filed/backup.c and restore.c in
1534 place of the old bnet_xxx code.
1535 kes Implement code that does an on the fly calculation of the
1536 signing digest during restore of encrypted files. It makes
1537 a best guess at the algorithm, and if it is not correct, will
1538 then revert to the old code which reads the file after it is
1540 kes Implement at least one missing crypto stream in stream_to_ascii()
1541 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1542 #877 where a reload with bad syntax causes Dir to exit.
1544 Cut: 2.1.14 beta (not released)
1546 kes Do not free a volume on a tape drive until another volume is
1547 mounted and read, or the autochanger unloads the volume.
1548 This should help the SD re-use volumes that are already mounted,
1549 and should fix bug #886.
1550 kes Apply patch from user brettedgar that allows gnome2-console include
1551 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1552 kes Apply patch from Lucien Weller that fixes day of week calculation
1553 because of DST flag problem. Fixes bug #887.
1555 kes Move find_next_appendable_volume() to after acquiring a valid device
1556 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1558 kes Unable to reproduce bug 872. However added additional testing for
1560 kes Bug #874 resolved by documenting SQLite limitations.
1561 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1562 kes Bug #881 resolved by removing typo in mtx-changer script.
1563 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1564 approval. Added a link to the wiki on the web page, and implemented
1565 a backup from http://paramount.ind.wpi.edu
1567 kes Fix update allfrompool to pass pool name.
1569 kes Convert to pure GPL v2 license.
1570 kes Fix sscanf problems reported by Peter Buschman that caused
1571 a bus error on Solaris.
1572 kes Rework (simplify) the select prompt in bat.
1573 kes Move get_jobid_from_tid() into lib and create a
1575 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1576 should definitely fix the problem of lost error messages in the
1578 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1579 kes Eliminate tcpd.h from the project. Enclose the #include from the
1580 library with extern C ...
1581 kes Add print of signal name when a signal is trapped.
1583 Release: 2.1.12 beta
1585 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1587 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1588 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1589 makes SQLit3 run 30 times faster, though a bit less safe.
1590 kes Implement --with-batch-insert in configure and detection of thread
1591 safe libraries. It is on by default, but turned off if no thread
1592 safe library (e.g. SQLite 2) is available.
1594 kes Fix Bacula PostgreSQL buffer overruns.
1595 kes Do better checking for NULL results returned from PostgreSQL;
1596 implement retry for failed queries; clear results buffer after
1597 failed query. Hopefully this will correct the PostgreSQL failures.
1599 kes Implement algorithm to handle only one appendable volume with
1600 Prefer Mounted Volumes = no.
1601 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1602 returned from a query.
1603 kes Make volume lock recursive.
1604 kes Implement an additional volume reservation algorithm that
1605 starts by considering all reserved volumes then uses the
1606 old brute force algorithm of searching the resources to
1607 find a suitable device.
1608 kes Add new reservations debug code and refine the old code.
1609 kes Update the win32/dll/bacula.defs file.
1611 kes Tweak reservations algorithm to permit a few more cases, i.e.
1612 volume reserved, but on different drive, ...
1613 kes Enhance SD status to include Pool and Media Type for drive in a
1614 more readable format (a bit longer).
1615 kes Fix PostgreSQL double free.
1617 kes Minor refactoring of restore decryption code.
1618 kes Add code to smartall.c to detect double free of a buffer.
1620 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1621 so that bsmtp will create a correct email address (mailbox only).
1622 kes Modify 'memory' command so that the buffers are listed as 'In use'
1623 to avoid confusion with Orphaned buffers.
1624 kes I reworked the OpenSSL include/lib flags to be handled in
1625 the standard Bacula way, which should fix bug #863 concerning
1626 non-standard OpenSSL libraries.
1628 kes Implement Help Browser window for bat.
1629 kes Fix reload bug that reset StorageId to zero.
1631 kes Fix TLS #ifdefing when TLS turned off.
1632 kes Ensure that when labelling a tape with Slot=0 that InChanger
1634 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1636 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1637 add DISTINCT (required by PostgreSQL).
1638 kes Implement BSOCK authenticate_director() method. Eventually will
1639 authenicate all daemons.
1640 kes Move several more functions into the BSOCK class.
1642 kes Add code to tell the OS that we no longer need a cached
1643 file that we were reading. In findlib/bfile.c. Also,
1644 only cache files that we are reading. Thanks to
1645 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1646 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1647 kes Implement script to automatically generate cats and dll .def
1648 files for Win32 dll.
1649 kes Update README.mingw32 to include new .def file generation.
1650 kes Correct typo in UTF-8 error message as reported by:
1651 jhernandez <julianhernandez@gmail.com>
1652 kes Add additional sm_check() code on debug level 1.
1653 kes Set default debug level to 1.
1654 kes Trap SIGABRT in attempt to get traceback.
1656 kes Reduce bat connect timeout from 30 to 15 seconds.
1657 kes More restructuring and implementing BSOCK class in place of
1659 kes Remove a few unnecessary malloc() tests in crypto code.
1660 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1661 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1662 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1664 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1666 kes Fix Verify InitCatalog. The attributes were not pointing to the
1667 correct saved location.
1668 kes Implement message callback so that GUI is sure to get all
1669 daemon messages. Currently displayed in a dialog in bat.
1670 kes Ignore SIGUSR2 (Bacula timer) in bat.
1671 kes Apply regress patch from bug #859 to allow regress to work
1672 with Solaris compiler.
1674 kes Begin adding TLS support to bat.
1675 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1676 clean up lex.c and make it more readable.
1678 kes Move more bnet functions into the BSOCK class.
1679 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1680 kes Complete change of berrno strerror() method to bstrerror()
1682 Release: 2.1.10 beta
1684 kes Cleanup incorrect email addresses in bsmtp.
1685 kes Make bat display initial messages rather than discard them.
1687 kes First cut of adding .mod to the run command.
1688 kes Implement auto display of messages in bat.
1689 kes Enhanced preferences to allow all Bacula output to be
1692 kes Try to make bsmtp date routines more generic.
1693 kes Fixed bug #856 autochanger documentation.
1694 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1695 kes Add new cats entry point so Win32 builds.
1697 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1699 kes Do better checking for the MySQL 64 bit libraries looking for both
1700 .a and .so libraries.
1701 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1702 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1703 kes Require the thread safe version of MySQL during configure. Thanks
1704 to Andre Noll for pointing this out.
1705 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1706 continuing in migration code.
1707 kes Apply implementation of tray-monitor font derived from gnome-console
1708 submitted by Andreas Piesk <a.piesk@gmx.net>
1710 kes Eliminate important memory loss in SQLite
1711 kes Fixed the batch insert MySQL thread specific data that was not
1712 being freed. See cats/mysql.c:db_thread_cleanup().
1713 kes Fix restore before command.
1714 kes Convert old hdr.name to name() in a few places.
1715 kes Implement update jobid command.
1716 kes Return all time_t dates in db_get_job_record()
1717 kes Stop watchdog in SD earlier.
1718 kes Put Pool just after Storage in please mount message.
1719 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1722 kes Update the po files.
1723 kes Fix Verify InitCatalog by making it cache attributes.
1725 kes Change name bacula-bat to bat for man 1 page to correspond to
1727 kes Check for client and store NULL pointers in status command. This
1729 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1730 kes Fix sign extended editing of %p.
1731 kes Clean out a little old #ifdefing in cats/mysql.c
1733 kes If time diff between DIR and FD is more than 600 seconds convert
1734 INFO message to WARNING.
1735 kes Implement heap size display in status for all daemons.
1736 kes Attempt to fix MySQL db open memory loss (not successfull).
1737 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1738 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1739 Query. This looks like a MySQL but but by doing extra releases,
1740 the memory goes away. This should fix bug #847.
1742 kes When backup fails, cancel SD before waiting for sd termination.
1743 kes If SD is waiting for FD to connect during cancel, wake up the
1745 kes Fix fsf code so that errno is correctly reported.
1746 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1748 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1749 so that Bacula doesn't later stumble into a seg fault.
1750 kes Use the term Restore Client in the restore Job report.
1751 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1752 the original job's FileSetId.
1753 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1754 spooling in migration jobs. Not yet tested.
1755 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1756 reading conf file from a pipe. However, do it with open_bpipe()
1757 rather than popen. Not yet tested.
1759 kes Fix an ugly bug where the VolCatBytes were getting updated
1761 kes Implement bconsole memory command that prints current memory
1762 usage, plus smartalloc dump.
1763 kes Clarify some error messages in backup, admin, and migrate.
1764 kes Shrink label dialog to smaller size.
1765 kes Invert Cancel OK buttons on restore to be OK Cancel.
1766 kes More strerror() to bstrerror() conversions.
1768 kes Start implementing bstrerror() in place of strerror().
1769 kes Stripping path -- seems to work.
1771 kes Prevent door and port files from being restored (mostly
1773 kes Free an unreleased buffer in compat code.
1774 kes Change console Job name from *Console* to -Console- to eliminate
1775 Win32 filename problems. Put Win32 path separator when creating
1776 Console file. This fixes bug #846.
1777 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1779 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1781 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1782 to force Win32 error message.
1784 kes First cut strip path. The data should be passed to the FD,
1785 but nothing is done with it yet.
1786 kes Enhance the digest and signature routines in the crypto
1787 library to accept a JCR and to use it to print error messages
1788 so that they will go in the Job report rather than the daemon's
1790 kes Simplify some of the verify signature code.
1791 kes Simplify a few of the alternative returns in the signature
1794 ebl Use only POSIX regex instead of GNU regex in breg.c for
1795 File relocation. It fix broken freebsd compilation.
1796 kes Convert all other Dir files to use new ua class message
1798 kes Tentative fix for missing digest signature in bug 807.
1799 kes Correct handle problem in new win32_ftruncate routine.
1800 kes Convert ua_purge.c and ua_update.c to use new ua class
1801 message routines for bat.
1803 kes Correct incorrect installation of LICENSE in Win32 installer.
1804 kes Display LICENSE at the beginning of the Win32 install.
1805 kes Attempt to correct the need for the png files to be installed
1807 kes Reapply my bat.conf install script in qt-console. I think I
1808 editted bat.pro instead of bat.pro.in and it was lost.
1809 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1810 the /var/lock/subsys for subsysdir. Also corrects typos in the
1813 kes First cut update job.
1814 kes Correct configure to include qmake of src/qt-console directory.
1816 kes Make restore job yes/mod/no print in one command so GUI works.
1817 kes First cut implementing backup and restore client.
1818 kes Correct editing in Verify output that caused a seg fault.
1820 kes Insure that bat.conf is not overwritten during installation.
1821 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1822 while I was implementing migration in March 2006 !
1824 ebl Cleanup file relocation, using char *RegexWhere instead of
1825 char *where + bool where_use_regexp
1826 kes Update some manpages and add bat manpage.
1827 kes Make a first cut at converting bacula.spec.in for bwx-console
1829 kes Apply patch from John Goerzen to add hostname as fourth argument
1830 to make_catalog_backup script.
1831 kes Fix typos I introduced into bsmtp.c
1832 kes Make pm_strxxx() routines handle input of NULL pointer. This
1833 is to protect from NULL pointers returned from SQL databases.
1834 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1835 kes Add more debug to FIFO code -- fix fifo regression test.
1837 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1838 kes Add thread timer to bnet_connect() to break from OS if wait time
1841 kes Update Win32 build to include new files, new symbols, and
1843 kes Implement socket level heartbeat (tcp_keepidle)
1844 ebl Commit File relocation patch
1845 kes Make bat have 'make install' target.
1846 kes Warn during install if old gnome-console binary found.
1847 kes Warn during install if old wx-console binary found.
1848 kes Add -8 option to bsmtp command line to add content type utf-8.
1849 Fixes bug #809. (Character coding problem in bsmtp).
1850 kes If < is found in target (from, to, cc) then do not enclose the
1851 target in < > in bsmtp. Fixes bug #772 (malformed address).
1852 kes When printing certain items in dbcheck, stop after 300000.
1853 Fixes bug #822. (dbcheck loops).
1854 kes Incorrect status in Dir after waiting for mount with poll set.
1857 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1859 kes Print waiting to reserve a device every 5 mins.
1861 kes Don't call close_part in label.c if tape and relabel.
1862 kes Don't free volume if busy in close() -- should help with
1864 ebl Fix #824 RunScript bug (After script could be execute twice)
1865 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1866 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1867 Add a regression script to test RunScript
1869 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1872 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1873 deprecated. No additional bugs will be fixed, and they will be dropped
1874 in a future release (probably 2.4.0).
1875 kes Change name of wx-console to bwx-console to make it more Bacula
1877 kes Change the name of gnome-console to bgnome-console to make it
1880 kes Some time in March, a Feature Request with patch from Jorj Bauer
1881 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1883 The ability for the director to validate a Client (FD) CN against
1884 an arbitrary set of patterns rather than the hostname, with
1885 A new 'TLS Allowed CN' set of directives which are implemented
1886 in the Client resource. Then pattern matching is used in place
1887 of hostname matching against the Certificate's CN. As an example, we
1888 have certificates which (a) use a local CA, and (b) have a CN of the
1890 kes Add new/changed entry points to Win32 build
1891 kes Create unaccepted-projects for projects that are not accepted.
1892 kes Simplify locking in the reservations system.
1893 kes Add more debug code in reservations.
1894 kes Make sure error condition on reserving a volume is handled correctly.
1895 kes Correct handling of volume_in_use.
1896 kes Correct handling of initializing a device.
1897 kes Move handling of broadcasting releasing a device into release_device().
1898 kes Correct attaching dcr to dev so that it is only done if device
1899 is properly initiated.
1901 kes Locking debug level tweaks in SD.
1902 kes Tweak new Volume code.
1904 kes Add exec external-command [wait-seconds] to bconsole. This
1905 executes the external-command. Note! normally external-command
1906 should be enclosed in double quotes.
1907 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1908 it should normally be off in a production system.
1910 kes Implement die command for SD so that we can force it to dump.
1911 kes Implement SD lock debug code.
1912 kes Implement new algorithm for keeping Volume list in SD. It
1913 is now owned by the device.
1915 kes Implement new code for freeing in use volumes that should
1916 resolve if not all, some of the problems of multiple drive
1917 tape conflicts described in bug 801.
1919 kes Fix gui/bacula-web/images files in svn.
1920 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1922 ebl Fix a bug in batch mode (in string escape)
1923 kes Correct migration prune SQL typo that crept in in a
1924 recent 2.1.x change.
1926 kes Move bnet_despool() into class in bsock.c
1927 kes Modify job report to include director name and Build OS.
1928 kes Move drop root privilege and check_catalog() before fork.
1929 kes Add update database scripts (version 9 to 10) to updatedb directory.
1931 ebl Check size and age of each file after its backup to see if
1932 it has changed during backup, if 'checkfilechanges' is set.
1933 The FD will do an extra check (stat(2)) after
1934 each file backup. mtime, ctime and size are compared with
1935 'before backup' information. If time or size mismatch, an
1936 error message will be generated. You must upgrade FD to use it.
1938 kes Make database name and user configurable
1939 --with-db-name=xxx --with-db-user=xxx
1940 kes Add back database type to message.c for debugging.
1942 kes Implement dir_sql() which issues an SQL query.
1943 kes Modify bat medialist to use dir_sql() and do some minor C++
1944 formatting as well as eliminating a number of pointers, simplifing
1947 kes Fix some of the mtx-changer grep commands for tape label readers.
1948 kes Convert a number of bsendmsg into the appropriate send/warning/error
1949 message class calls.
1950 kes Suppress the using database message in the .sql command.
1951 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1953 kes Add context menu for floating a window.
1954 kes Some minor cleanup and name changes in qt-console
1955 kes Add doing mt setblk 0 in Win32 mtx-changer.
1956 kes Apply Martin's bug fix to move definition of ENODATA for
1958 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1959 sqlite2 and sqlite3.
1961 kes More pruning cleanup.
1962 kes Turn on wait_for_drive by default in mtx-changer.
1963 kes Turn on Batch insert code by default as it now passes regression.
1964 kes Add ./configure --enable-bat to enable building of Bat.
1965 No install yet though.
1967 kes Implement a new .sql command for bat.
1968 kes Implement code to turn off pruning in obtaining the next volume.
1969 Pruning is turned off for the status dir command, but turned on
1970 for SD requests and for the list nextvolume command.
1972 kes Correct Qmsg() that was not updated correctly when committing a
1973 previous change (probably the recent TLS patch).
1975 kes Write new subroutine is_volume_purged() that explicitly checks
1976 if the Volume is purged, and if so marks it as such. This should
1977 resolve problems reported about needing to mount twice to recycle
1979 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1980 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1981 amount of duplicated code.
1982 kes Do volume pruning only for the Media Type desired (reduces pruning time
1983 if multiple Media Types are in the same pool).
1984 kes Implement more detailed info in the Job report for the Bacula version
1986 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1988 ebl Add bbatch tool to bench database and insert mode.
1989 Fix sql quote stuff in batch mode
1990 Fix sql stuff for mysql
1992 kes Correct problems with am/pm scheduling. Fixes bug #808.
1993 kes Implement new prunning code that prunes up to 1000 jobs at
1994 the same time. The same technique can be applied to a number
1995 of other prune/purge subroutines.
1996 kes Add an insanity check when starting a new tape job to ensure
1997 that the tape position has not been changed. If so fail the
1999 kes Fix Win32 build for dlls to add the folllowing:
2000 src/lib/bsock.c -- new file with new entry points
2001 src/lib/dlist.c -- new entry points
2002 src/cats/sql_create.c -- new entry point
2003 src/cats/sql_cmds.c -- new DATA item exported
2005 ebl batch mode cleanup bscan-test is ok now.
2006 kes Implement SD code to check length of disk volume before appending.
2008 kes Correct return status on db_batch... routines.
2009 kes Add call to db_write_batch_file_records() to migration code.
2010 ebl Fix AfterJob timing
2011 kes Move the checking of the database in initializion of the Director
2012 to after we drop privileges. This avoids the need for both root
2013 and bacula access to the DB.
2014 kes Correct a misplaced variable definition in src/filed/backup.c
2015 kes Correct how the new batch insert db_create_attributes_record()
2016 uses the arguments. Caused a seg fault in bscan.
2017 kes Implement lock() and unlock() methods in DEVICE class.
2018 Implement block() and set_block(xx) methods in DEVICE class.
2019 kes Modify bnet_connect() so that it uses time() to check for the
2020 wait time expiring (on some OSes, some system calls may not
2021 return immediately).
2022 kes Modify Verify to obtain the previous JobId when it is actually
2023 running rather than at schedule time (as it was in 1.38.x).
2024 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2026 kes When checking pid in pid file, continue running if the pid is
2027 the same as ours. This occurs on IRIX after a system crash.
2030 kes Extend new GUI API.
2031 kes Make the ua structure a class, and implement send_msg(),
2032 error_msg(), warning_msg(), and info_msg().
2034 kes Apply fix from for building wx-console on the Mac from
2036 kes Implement new select mechanism for GUI programs.
2037 kes Reorganize initialization of stackedWidgets in bat.
2039 kes Add updated nagios plugin supplied by Christian Masopust.
2041 kes More bat implementation.
2042 kes File migrate bug with Pool Occupancy using mediaid instead
2043 of jobids. Fixes bug #795.
2044 kes Fix orphaned buffers in filed backup and verify due to
2045 crypto buffers not freed during errors. Fixes bug #789.
2046 kes Extend new GUI api code to tree commands.
2047 kes Ensure that tree and dot commands check console ACLs.
2048 kes Permit marking directory with trailing slash.
2049 kes Allow 20 console connections (instead of only 10).
2051 kes Add smartctl call to bacula-sd.conf as an example of getting
2054 kes Modify jobq.c to let simultaneous restore jobs run. This may
2055 cause them to fail if they cannot get a drive.
2056 kes Add Client Connect Wait to Storage daemon to permit users to
2057 modify the time the SD waits for a FD connection.
2059 kes Correct virtual changer check which was backwards. This caused
2060 volumes to be unloaded into slots already occupied.
2062 kes Apply Command ACL filter to JobId list in restore command.
2063 kes Correct typeo in var.c patch.
2065 kes Don't let Bacula prune File or Job records for the current Job.
2066 kes Fix variable substitution pad + inc bug reported (with patch)
2069 kes Correct SQLite log table index as reported by Luca Berra.
2071 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2073 kes Begin implementing new comm signals for API.
2074 kes Fix a few places in lib/message.c where the open fd may
2076 kes Continue implementing lib/bsock.c (real class). Make jcr,
2077 who, host, and port private. There are new methods to access
2078 them for non-class use. This required touching a number of files.
2080 kes Add LANG=C to autoconf/randpass so it works with languages other
2081 than English. Fixes bug #788.
2083 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2085 You will not be able to generate Include/Exclude list any more.
2086 It will be fixed soon.
2087 If you want to use this, you can apply
2088 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2090 kes Restore of sockets created false error messages because Bacula
2091 no longer restores sockets, but the code was still trying to
2092 set the attributes on a non-existent file. Reported by a user.
2093 ebl finish RecyclePool feature
2094 Media will takes Pool.RecyclePool
2095 when moving from Scratch to a Pool or when user will do
2096 update volume=xxx frompool
2097 To use it, add RecyclePool = aPool to your Pool resource
2100 RecyclePool = Scratch
2104 kes Expand new BSOCK class adding signal() and new BNET signals.
2105 kes Begin enhancing the dot commands adding a new API function
2106 that returns more information and will make it easier
2107 to interface to the Director from a program.
2109 kes Make DEVICE fd private. Its new name is m_fd, and can be
2110 obtained with dev->fd() outside the class. This is the
2111 first of many DEVICE members to be made private.
2112 kes Implement Michael Renner's idea on having a virtual disk
2113 changer. I made some minor modifications (e.g. I did not
2114 implement the Virtual Changer directive, but simply set
2115 the Changer Command to an empty string.
2117 kes Implement a BSOCK send() method that writes the whole record
2118 in a single write() request rather than in two.
2119 ebl add update volume=xxx recyclepool=yyyy
2120 volume takes recyclepool from pool when using update volume=xxx from pool
2122 kes Fix encryption deblocking bug, which caused some restored files
2123 to be truncated. This fixes bug #763.
2124 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2125 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2127 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2128 ebl Use btime_t instead of uint64_t in media patch.
2130 kes Optimize the use of the database a bit in the Status dir command.
2131 Only open it when needed, ensure that if any previous database
2132 was opened, it is closed.
2134 kes Correct VolCatBytes bug from media patch.
2135 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2136 in the case of orphaned records.
2137 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2138 and File records in 300K chunks to be more efficient. This
2139 idea came from Juan Luis Frances (if I remember right).
2140 kes Apply Eric's scratch patch that moves a purged Volume to
2141 the RecyclePool. Question: how is RecyclePool set? what
2142 happens to the ScratchPool?
2143 kes Apply Eric's media patch that collects read/write media
2144 times as well as byte counts. This patch requires a
2145 simultaneous upgrade of the DIR and SD. Note, there
2146 should be some way to turn off timing. I'm not sure
2147 times are in Bacula units.
2148 kes Apply Eric's batch-insert patch.
2150 kes Update projects list.
2152 kes Implement Include/Exclude file lists in FD as dlists using
2153 the new dlistString class. This permits efficiently having
2154 large include/exclude lists and completes project Item 25.
2155 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2156 console is authorized to cancel the job. This fixes bug
2158 kes Modify SD so that the VolCatJobs medium record is updated
2159 at the beginning of a Job rather than the end. This
2160 fixes bug #775 where exceeding MaxVolJobs caused jobs
2162 kes Added a mutex around getting and setting Volume information
2163 so that multiple simultaneous jobs will single thread.
2165 Switch to using Subversion
2166 kes Remove src/pygtk-console/ from configure
2168 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2169 plus the entrypoints.
2170 kes Apply patch supplied that corrects debug print
2171 in canceling jobs for max run time. Supplied as
2172 part of bug #621, which was previously fixed.
2174 kes Test on job_canceled() and sd_msg_thread_done inside
2175 loop starting the message thread to avoid a race condition.
2177 kes Remove rl_catch_signal from console.c as it conflicted
2178 with the header definition. Fixes bug #765.
2179 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2181 kes Clarify some stored/acquire messages to indicate if the
2182 problem is with read or append.
2184 kes Fix memory leak with storage ids in cats/sql_get.c
2185 kes Terminate watchdog earlier to avoid reference to released
2186 memory -- reported by Jason Austin.
2187 kes Move closing the database from jobq.c to the director daemon
2188 termination routine. This fixes memory leaks for shadow jobs
2189 (i.e. migration jobs).
2190 kes Free up the unique jobid chain items in migrate.c. This fixes
2191 a memory leak problem.
2192 kes Convert some ugly looking for statements to use foreach_alist
2193 in findlib/find.c. This will facilitate converting the structures
2194 to use dlist (for large include/exclude lists).
2195 kes Fix a bug in the btree.c and btree.h routines, then rename them
2196 rblist and add them to be built in src/lib. Include some new
2197 methods written by Rudolf Cejka that make the code more readable
2198 (hides some of the ugly casting).
2199 kes Add set_next() and set_prev() methods which make the code much more
2200 readable. Also add a new dlistString class that facilitates storing
2201 strings in dlists. To be used in the large include/exclude lists.
2202 kes Make some trivial modifications to lib/tree.h that use rblist
2203 rather than dlist for storing the tree links. This was suggested
2204 by Rudolf Cejka. The result of this is that the restore tree now
2205 uses red-black binary trees rather than simple linked lists. This
2206 should give rather dramatic speed improvements for directories
2207 contining large numbers of directories/files (more than 10000).
2209 kes Fix maxruntime bug #621.
2211 ebl Implement the include JobID in spool file name project.
2212 kes Reorder projects file in order determined by Jan 2007 vote.
2213 kes Implement item #12 on project list -- quick release of FD by
2215 kes Fix open of SQLite3 db where user does not have write permission
2216 so that DIR does not crash. Fixes bug #761.
2218 kes Add back missing @ in Win32 Makefile.
2219 kes Change 'Device not configured to autolabel' from INFO
2221 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2222 which should restart an indefinite # of times.
2223 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2224 other DIR specifications.
2226 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2227 Fix path quoting in SQLite scripts.
2228 Fix problems with SHGetFolderPath.
2230 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2232 kes Fix Job restart on error bug that promotes an Inc to a Full
2233 backup. This should fix bug #755.
2234 kes Add qt-console and first cut of code.
2238 kes Fix Bacula->Documentation link on Win32 to point to index.html
2239 instead of bacula.html. Fixed bug #750.
2240 kes Return JobId in db_get_job_record() when JobId==0. This should
2242 kes Do not release source pointers when restarting a failed job.
2244 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2245 This *should* fix bug #747.
2246 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2249 kes Modify USTORE constructor to set an empty store_source string,
2250 and don't copy the store_source string in a cancel. Hopefully
2251 this will fix Arno's seg fault, bug #744.
2252 kes Add back code to disable conio in configure. Fixes bug #743.
2253 kes Correct the Options scanner in the FD to correctly handle
2254 SHA1 option, which was eating the next option. Reported by
2256 kes Add code to indicate when the SD is spooling, spool wait, and
2257 despooling as requested by Alan Brown.
2259 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob