1 Technical notes on version 2.5
5 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
6 examples/database/dbcheck.sql
7 enhancement to wait command: wait mount ...
9 filepattern (restore with regex in bsr)
14 ebl Try to disable _FORTIFY_SOURCE by default
16 ebl Tweak compat.h for new mingw
18 ebl Add new ScratchPool directive to Pool. Thanks to Graham
19 ebl Turn on db_get_file_list() single SQL because the failure
20 was due to a full FS. And the accurate test fails with the
23 ebl Fix a bug that doesn't update RecyclePool all the time
24 during the first startup.
26 kes Turn off db_get_file_list() giant SQL because if fails on
27 my production machine.
28 kes Fix bat.pro.in so that bat is properly installed rather
31 kes Modify search for .conf file so that if one is given on
32 the command line, it will be used, otherwise it will use
33 the SYSCONF directory. It will no longer look in the current
34 directory unless explicitly requested on the command line.
36 kes Fail a job that references a plugin if no Plugin Directory is
39 kes Fix bug #1211 crash during reload with bad dird.conf file.
41 ebl Add detection of intptr_t and uintptr_t to configure process
43 ebl Change some cast to use intptr_t instead of long
45 kes Apply acl_solaris_update.patch submitted by Marco (thanks).
46 kes Remove configure check for resolv.h -- it is apparently not needed
47 and causes build warnings on FreeBSD.
48 kes Ensure that the installer and newinstaller Makefiles are called
51 kes Apply Eric's fix for suppressing extended attributes error messages
52 when dealing with deleted files.
54 kes Add src/win32/newinstaller -- single file installer
55 kes Attempt to explicitly call gmake when needed, or if not found
56 skip the calls. This should fix the FreeBSD regression/build.
58 kes Fix bat.pro.in so that bat will install.
60 kes Add more debug output to VSS init.
61 kes Attempt to correct win32 debug in berrno.
63 kes Fix bug reported by Dan where make fails in clean of src/win32.
65 kes Fix bug #1212, SD is unable to recycle purged volumes. fstat()
68 ebl Despool attributes directly from the director if attribute
70 Beta Release 2.5.28-b1
72 kes Fix bat install broken by $DESTDIR change.
74 kes Fix annoying compiler warnings in console/conio.c
75 kes Fix win32 build (depended whether or not ./configure was run).
77 kes Apply fix suggested by Bruno Friedmann to configure.in to
80 kes Turn on Eric's match_bsr tape block checking code.
81 kes Correct values used for tape block numbers in record.c.
83 ebl Fix a problem with PoolUncopiedJobs option which was broken
84 by the new JT_JOB_COPY type.
85 kes Fix bug #1206 -- Error: sql_update.c:194, which was probably
86 caused by the user modifying the Bacula DB schema.
87 kes Remove rogue line of C code.
90 Beta Release 2.5.16-b1
93 - Add "list copies" command
94 - Add JT_JOB_COPY type for job copies
95 - Don't allow copy jobs in automatic restore
96 - Promote next copy job as backup when original job is deleted
97 kes Closed bug #1207 -- 2.4.4-b1 strange volume/device handling
98 kes Closed bug #1204 -- Undescriptive help options
99 kes Closed bug #1202 -- Revise documentation
100 kes Closed bug #1178 -- Bat 2.4.3 tries to double-purge volumes
102 kes Closed bug #1166. Fixed by Eric -- Problem canceling job if
103 client looses connection while being backed up.
104 kes Fixed bug #1200 -- inconsistent auto purge documention
105 kes Fix documentation for Recyling ambiguity. Fixes bug #1200.
106 kes Remove old mmap code from compat.h/cpp
108 kes Correct typo in Win32 Makefile editing
109 kes Correct typos in debug output.
110 kes Improved error detection in creating bsrs.
111 kes Add debug code to Win32 restore
114 ebl Cleanup director VolParam struct
116 ebl Replace File:Block in BSR by Address to fix #1190
118 kes Correct missing return in Darwin code.
120 ebl Copy joblog after a Copy job
122 kes Tweak block.c read to more closely simulate write for computing
123 block addresses and turn on disk block testing.
124 kes Implement a crude 'list joblog' mostly for debugging.
126 kes Fix Migration bug #1206 sql error with NULL FileSetId when no jobs
128 kes Fix Migration JobLog bug #1171. Get the JobIds correct.
130 ebl Fix segfault in bscan when using debug mode
132 kes Fix configure to do minimum Win32 configure so that make clean
134 kes Tweak modify FD header to use %ld instead of %d.
135 kes Remove hand scanning of FD header in SD and use Bacula's
136 sscanf, which is now OS independent.
137 kes Define new object (file/dir) begin and end Volume label records
139 kes Use new method of defining XATTR #defines to avoid need for having
142 ebl Rename all STREAM_ACL_..._T into STREAM_ACL_..
144 ebl Add a new lock manager that can detect deadlock situation
145 This new option is activated with a --enable-lockmgr configure
147 ebl Add new Director->MaxConsoleConnections directive
149 ebl Fix bacula-sd hanging after tape gets full + unload
151 ebl Remove extra db_lock() in get_prune_list_for_volume()
152 ebl Apply 2.4.3-prune-deadlock.patch that fixes a problem when
153 using Catalog as message backend.
155 kes Apply Marco's Darwin xattr patches.
159 kes Apply Marco's Extended attribute support patch.
160 kes Update projects file
162 kes More changes to ensure that during thread switches the jcr
163 is removed from the TSD.
164 kes Ensure that consoles attach jcr to thread, and that only the
165 thread attached is removed from the TSD.
167 kes Move definition of FileId_t to bc_types and define it once in the jcr.
169 kes Remove all time_t from arguments in favor of utime_t, which is
171 kes Add more debug to match_bsr.c and use %u for unsigned debug editing.
173 ebl Apply patch for bug #1182 about Recycle flag
174 that is not updated after a pool change.
175 kes Since the user has been warned, allow console purge command
176 to purge volumes that are in use. This is a fix for bug
177 #1191 before it was submitted.
178 kes Fix Win32 build to add new sd_plugins.c
179 ebl Apply patch from bug #1175 that reset the Slot and the Inchanger
180 flag in db_make_inchanger_unique().
181 ebl Remove a Emsg() after recieving a Fatal signal that can lock
184 kes Apply patch from bug #1187. It prints an error message if the
185 Maximum Block Size in the SD is too big.
186 kes Increase Maximum Block Size to 2,000,000 bytes.
187 kes Use doubly linked bsr list so that consumed bsrs may be
188 removed. Removing not yet implemented.
190 kes Implement a fix that very likely fixes the undesired volume
191 purge reported by Graham Keeling.
192 kes Implement bsr block level checking for disk files. However,
193 it does not work correctly in accurate tests, and all the
194 migration and copy tests, so it is turned off.
195 ebl Make SD plugins work.
197 ebl Apply Riccardo's patch to compile bacula+mysql on mandriva
199 ebl Add more variables accessible through the director plugin
202 ebl Do work on plugins
203 - fix compilation of the director plugins
204 - add plugin list to status dir output
205 - add director plugin dump after a fatal signal
206 ebl Apply Riccardo's patch that fix some win32 compilation errors
207 and a bug with bat version browser.
209 ebl Add Plugin debug after a fatal signal.
210 ebl Add db and rwlock debug after a fatal signal.
212 ebl Fix maxwaittime to fit documentation, this time is now counted
213 from the job start and group all wait periods.
214 ebl Add tips for postgresql to improve performance when having
215 multiple batch insert at the same time.
217 ebl Remove extra debug for db lock.
219 kes Apply Riccardo's second patch that cleans up the #include
220 file order + a few Win32 particularities to make bat work
222 ebl Add allow_transactions flag to mysql db backend.
223 kes Apply win32-fixes patch from Riccardo that makes the Win32
224 bat more stable and faster (but still slow).
226 kes Fix bug with job name duplication if more than 60 jobs created
228 kes Correct some bugs of cleanup in SD if the FD connection fails.
229 ebl Add code to get more information after a fatal signal.
231 ebl Apply Bastian's patch that add spooldata=yes|no option
234 ebl Fix bash shell to sh shell in database creation script
236 kes Fix orphaned jobs (possible deadlock) while pruning.
237 kes Use jcr stored in bsock rather than searching in getmsg.c.
238 This results in about a 5% speed improvement with four
240 kes Implement win32_chmod that uses wide characters, if possible,
241 to get and set the file attributes.
243 kes Apply pane freezing during updates patch from Riccardo Ghetta.
244 kes Rework next_vol and autoprune a bit due to failure in
245 recycle-test. prune_volumes() now returns no status,
246 but should prune at least one Volume, if possible.
247 kes Modify check_if_volume_valid_or_recyclable to reject a
248 volume with Recycle set off.
249 kes Modify prune_volumes() to continue if volume Recycle is off
250 or if the volume has expired. Add more debug.
252 kes Fix bug #1046 VolumeToCatalog incorrectly reports mounted
253 filesystems as missing on the Volume.
254 kes Rewrite the set_jcr_job_status() code to include job status
255 priorities so that more important status changes occur but
256 lower priority status changes will not overwrite something
257 more serious. This could possibly cause reporting incorrect status
258 reporting in some cases. More testing is needed to ensure
259 I have the right priorities. This vastly simplifies the previous
261 Verify Diff status should now be correctly reported, whereas it
263 kes Reduce some debug output.
264 kes Apply Joao's patch to SQLite tables to make chars work.
266 ebl Fix #1175 About update slots that don't reset InChanger flag when
268 ebl Fix #1173 where prune_volume() returns a volume from the scratch.
270 kes Remove jobq.c constraint that read and write SD must be
271 different. This may lead to more deadlocks in the SD,
272 but they should be resolved there.
273 kes Ensure that job report is always printed even if job is failed
275 kes Don't print job report twice for failed VBackup jobs.
277 kes Fix editing of retention time difference to use 64 bit
278 int instead of 64 bit unsigned. This should permit very
279 long retention periods.
280 kes Implement code to prohibit a write job from appending to a
281 Volume that will be used for a read operation. This is
282 new code and could possibly cause some conflicts.
284 kes Integrate James Harper's Exchange Win32 plugin patch.
285 kes Apply patch from Marco van Wieringen that implements the new
286 Solaris libsec interface for ACLs so that Bacula can save and
287 restore both the new ACLs and old ACLs.
288 kes Marco's patch also corrects the file dependency generation code
289 so that it works properly both with shared libraries and static
291 kes Marco's patch also includes a small cleanup of the cats Makefile
292 to remove some references to non-existent files.
294 kes Modify win32 Makefiles to use full paths in most cases.
295 In particular add MAINDIR environment variable that points
296 to the main Bacula source directory.
298 kes Add read volume list code to SD -- not yet used.
299 kes Add James' binutils patch
300 kes Split volume management code out of src/stored/reserve.c into
302 kes Modify configure to do an automatic make clean. This ensures
303 that any changes to ./configure options are handled correctly.
305 Beta version 2.5.16 release:
307 ebl Rename JobStat table to JobHistory
308 kes Ensure that only normally terminated jobs are migrated.
310 kes Add Makefile dependency when using LIBTOOL_LINK so that any
311 change in ./configure options will be accounted for.
313 kes Fix typo in the ACL patch that I overlooked.
314 kes Apply Marco's libtool include patch.
316 kes Apply Bastian Friedrich's ACL patch to eliminate ACL
317 errors during restore.
318 kes Minor cleanup of create_restore_volume_list() code.
319 kes Fix typo in console Makefile.in
321 ebl Fix #1110 about RunScript that can't execute a script with
322 Unicode characters in the path.
324 kes Apply tray-monitor patch from Bastian Friedrich to make it
325 work with the new FD.
327 kes Apply cleanup patch from Marco
328 kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
329 that implements libtool to create shared objects out of
330 the Bacula libraries.
331 kes Fix tray-monitor so it will speak to new FD.
332 ebl Fix bug with ANSI label when volume name length < 6
333 ebl Fix segfault in debug level > 50 with btape.
334 ebl Remove warning message in btape when command is empty.
335 kes Fix Win32 build to pull in new BACULA define.
337 kes Change IncludeDir to Exclude Dir Containing.
338 kes Implement code to prohibit ExcludeDirContaining in an
339 Exclude section (same for Plugin and Options). A bit
340 of a kludge with RES_ITEM2 ...
341 ebl Add field to command list to restrict Runscript console
343 ebl Use a separate JCR when running Console command with Runscript.
344 ebl Permit to mark version as Beta in some outputs
346 kes Add plugin types in jcr.h to reduce need to cast.
347 kes Do better checking of plugin return values.
348 kes Free plugin context after calling pluginFree() as
350 kes Allow plugin to call JobMessage with NULL context.
351 kes Do not add plugin to global list if loadPlugin returns error.
352 kes Rework plugin.h a bit to reduce dependence on Bacula.
354 kes Move generation of bsr file for Virtual Backup to run section
355 so that it is generated just before actually running.
356 Suggested by Graham Keeling.
358 kes Add malloc and free Bacula entry points for plugins. Increment
359 FD plugin interface version. Create a Bacula plugin context
360 structure to keep track of whether or not the plugin is disabled.
361 kes Apply FileIndex fix for plugin name stream suggested by James.
362 kes List plugins in FD status report when debug > 0.
364 ebl Add a new VerId variable that is printed in version command.
365 kes Fix migration SQL not to migrate a job that has not terminated.
366 This is a partial fix to bug #1164.
367 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
368 backup start time bug reported by Graham Keeling.
370 ebl Fix possible bug in cancel_job() with job that are not
373 kes Fix bat build for Win32.
375 kes Copy plugin link field into ffpkt.
377 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
378 It provides FileRegex in bsr files and code to collect regex
379 from the user during restore, an Allow Mixed Priorities feature,
380 and documentation for the above.
381 ebl Remove db Berkeley from configure process
382 kes Do dirty check on hostname (Linux only) and if not resolvable
383 use localhost as default.
384 kes Increase vtape max block to 20GB.
386 kes Refactor restore code to create a close_previous_stream(). This
387 This may destabilize the source.
388 kes Implement planned startRestoreFile() plugin call.
389 ebl Remove missing Loaded information from status slots storage command.
390 ebl Fix Console command problem that cancels the job
391 kes Add more plugin restore debug code.
393 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
394 kes Rewrite plugin restore interface a bit to correspond to how Bacula
395 creates and writes to the restored file.
396 kes Add some DebugMessage() calls to the bpipe-fd.c program.
398 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
399 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
400 Bat; allow add and delete in place of mark and unmark.
401 kes Another attempt to fix the endRestoreFile plugin bug noted below.
403 kes Apply dbi driver patch from Joao.
404 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
405 Bastien Friedrich reported the bug.
406 kes Create plugin instance only when FD job starts.
407 kes Add new FD plugin event: bEventCancelCommand when
408 a cancel command is issued to the FD.
410 kes Add cmd_plugin flag to jcr so we can globally know if a
411 command plugin is running.
412 kes If command plugin running, do not attempt (for the moment)
413 to get Win32 extended attributes.
414 kes Ensure that proper Win32 flags are set in bfile packet
415 if plugin_bopen() works on Win32.
416 kes Remove generated src/plugins/fd/Makefile
418 kes Implement build and install of bpipe-fd.so plugin.
419 kes Rework the interface that passes packets to the plugin
420 so that the packet is started and ended by the packet size.
421 This allows the driver to do a sanity check.
423 kes Rework the pluginIO Bacula internal code to enable
424 proper handling of Win32 error codes from GetLastError.
425 kes Apply Joao's patch to regress startover_libdbi.
427 ebl Add -B option to dbcheck to get catalog information
428 kes Fix Win32 build to include new library function.
429 kes Remove some old reader/writer code.
430 kes Implement ./configure --with-plugindir=xxx
431 ebl Fix the mysql bug in the new accurate code
432 kes Improve plugin debug. Create plugin test.
433 kes Set main thread specific data to INVALID because it
434 has no jcr. This allows debug output to work correctly.
435 kes Add src/plugins/fd/Makefile to ./configure process.
436 kes Make first cut attempt to correct SQL that computes the current
437 Pool usage. This is to fix bug #1159.
438 kes Do a bunch of plugin cleanups for Win32 and more careful checking
439 of PluginDirectory and whether or not a plugin was found.
441 kes This code should fix the race condition that leads to a Director
442 crash at job end time when the job list is updated. This was reported
444 kes Add more plugin documentation and fix include of config.h for
445 Win32 build (I hope).
447 ebl Revert to htable instead of rblist
448 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
449 tree instead of htable.
450 ebl Use a dedicate DB link to compute and send the accurate list
453 kes Fix compile errors in filed/fd_plugin.c.
455 kes Remove all double quotes from SQLite creating script and
456 replace by single quotes as suggested by John Huttley.
458 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
459 It significantly improves the performance of dbcheck for
461 kes Fix bad debug code call in src/filed/accurate.c
463 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
464 output. Perhaps we really need to implement M_SAVED.
466 kes Fix bug #1156 FD crash during processing of Accurate data.
467 kes Tweaks to htable code to improved debugging and make names
468 a bit more meaningful.
470 ebl Remove time_t from update_stats()
472 kes Modify the license of the example plugin program to allow
473 it to be used by anyone for making a Bacula plugin.
474 kes Make apply_rp_codes() in bpipe-fd.c be static.
476 kes Remove Encryption and Accurate lines in vbackup output -- not used.
477 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
478 kes Add host name to items printed during dump.
479 kes Make Check File Changes default on.
481 kes Set the default FD timeout to 3 minutes (previously 30).
482 kes Apply Bastian Friedrich's weird spelling correction patch.
484 kes Always print Verify hash differences. Rename variable to make the
485 code slightly more readable.
487 kes Correct tests for MaxFullInterval as reported by
488 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
489 kes Fix MaxDiffInterval code as well.
490 kes Enable Win32 plugin load code in lib.
491 kes Make Verify code that computes disk checksums use the same
492 algorithm as backup when dealing with sparse files.
493 kes Attempt to run VSS on any systems newer than Vista -- should
494 make it work on Windows Server 2008.
495 ebl Change the new statistic implementation. Remove the UseStatistic
496 directive and add a 'update stats [days=...]' command. You can
497 now decide when copy job records from Job table to JobStat.
498 Statistics are much more accurate with this.
500 kes Fix SQL case problem that may cause the failure of DiskToCatalog
502 kes First cut adding SD plugins.
504 kes Add Slot if it is non-zero to writing bsr file after a
506 kes Change a number of bnet_fsend() into class method calls.
507 kes Begin audit of diff of 2.4 branch to trunk code.
509 ebl Fix the mysql creation script that double-created an
510 index of the same field on the Media table.
511 Add an index to on VolumeName to the Media table for mysql.
513 kes Another try at fixing Vbackup. It looks much better this time.
514 Disable file index sanity check in FD with value stored in
515 attributes record because with Vbackup the File Index gets
516 changed, but not the attributes record.
517 Enhance some debug code.
518 Fix handling of re-indexing records that are copied in Vbackup.
520 kes Made level_to_str() know about Virtual backup.
521 kes Set correct Virtual backup write pool.
522 kes Fix compile warning in new dbcheck port code.
523 kes Fix migration code broken by previous virtual backup fix.
525 kes Fix problem of Virtual backup not writing a sequential FileIndex.
526 kes Reset Virtual backup time/date to the value from the last backup.
527 kes Ensure that storage name is passed to SD on read.
528 kes Correct a problem with Level and Virtual backup, rework how
529 bsrs are printed in debug to use standard routine.
530 kes Apply patch from Chris in bug #1133 that provides alternate db port
532 ebl Remove catalog dependency from bcopy tool.
533 ebl Modify catalog scripts to have an easier packaging integration,
534 using default variables.
535 Make difference between SQLite3 and SQLite in db_get_type()
537 kes Apply most of changes in a patch from:
538 Michael Stapelberg <michael+bacula@stapelberg.de>
539 that allow the Bacula FD to compile on IRIX 6.5.
541 kes Apply patch from Bastian Friedrich that accepts a yes on a
542 delete volume command line.
543 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
544 job when reading from one autochanger and writing to another.
545 kes Minor tweaks (copyright dates convert to use method instead of bnet).
547 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
548 drives when no tape is mounted.
550 kes Add additional info to some SD messages.
551 kes Add fix supplied by Martin Simmons for turning off EOL character
552 in new console multi-command code.
554 kes Fix a Verify InitCatalog problem where in certain cases
555 a garbage filename may be entered in the verification database. This
558 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
559 sent in by Riyas Yoosuf.
561 kes Fix seg fault in Dir during estimate command with no level value
562 given. This fixes bug #1140.
564 kes Add message to migration job when the target job is already migrated.
565 This closes bug #1129.
568 kes Raise some restore debug levels.
569 kes Replace off_t by boffset_t where ever I found it.
571 kes Define a machine dependent ioctl request type for use with
574 kes When a migration job actually runs, re-check the Job record
575 and skip if the job is already migrated. This should
576 significantly reduce the problems with bug #1129.
578 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
579 turn off glibc checks that prevent getting good dumps.
580 kes Implement console 'wait mount' command. Doesn't yet work.
581 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
582 kes Break the do_swapping into do_unload, do_swapping, and
583 do_load. It is much more logical that way.
584 kes Implement a set_dcr_from_vol subroutine in acquire.c for
585 reading volumes. This allows the dcr to be refreshed after being
586 zapped when the wrong volume is mounted.
587 This should fix bug #1126 -- During multiple tape restore, bacula
588 does not ask for physical tape change, but rereads same tape
590 kes Apply patch submitted for bug #1107 with a small modification.
591 This fixes a bug where bcopy copied too many records.
592 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
593 This fixes bug #1124.
594 kes Make the default bat restore Pool be Any. This fixes bug #1118.
596 kes Remove debug statement that crashes the SD at the end of
597 a tape during restore. Fixes bug #1125.
599 kes Implement Win32 bat changes made to Branch-2.4
601 kes Tweak separator command in console to start disabled and
602 allow defining no separator character. Also make code a
603 bit more fault tolerant.
604 kes Make btraceback write the traceback to the working directory
605 before attempting to mail it.
606 kes Add a RFC to Projects.
608 kes Attempt to implement a kludge to make Qt work with bat
610 kes Setup rstorage correctly. Virtual backups are working.
612 kes Move setting JobLevel and JobType into a method, which should
613 allow completing Virtual Backups.
614 kes Fix verify jobs to work again.
616 kes Virtual Backup tweaks -- it is close to working.
618 kes Ensure that SD tried to mount a volume not in an autochanger
619 at least once before asking for operator intervention.
620 kes Make SD aware of Virtual Backup jobs.
621 kes Add VirtualFull for bat.
622 kes Changes to get read storage correct for Virtual Backup.
624 kes Remove old code from label.c
625 kes Split display_display_info() out of write_bsr_file()
626 kes do_vbackup_init() working -- i.e. bootstrap file built.
627 kes Change Bacula trademark owner from John Walker to Kern Sibbald
628 kes First non-working cut of vbackup
629 kes Correct FD heartbeat code to use volatile variable accessed by
631 kes Zero thread id with memset if on Win32 in case it is a struct.
632 kes If cannot create JobMedia record, continue to try to write eof
633 and clean up in block.c
635 kes Add code to interface OpenSSL to new Win32 pthreads code which
636 used a structure for thread_t.
638 ebl tweak bat for win32 compilation
640 ebl Remove tokyo cabinet from the source
641 ebl Update configure/autoconf to support berkeley DB
642 ebl Add a sort to db_get_file_list() to improve bsr construction time.
644 kes Add a mtx-changer.conf file that is not overwritten during
645 an upgrade. It fully configures the mtx-changer script.
646 kes Clear in-use bit on vol when unused while swapping.
648 kes Remove sleep at end of ./bacula
649 kes Clear hash packet for hardlinked files correctly. This corrects
650 a long standing bug where hardlinked files selected individually
651 would occasionally not be restored.
653 kes Apply Eric's patch to ensure that autoprune does not return
654 a Volume not in the autochanger unless requested to do so.
655 kes Correct bat restore display of multiple drives. This fixes
657 kes Do find_a_volume() each time an unload is done. This
658 fixes the failure of maxvol2-test.
660 kes Add some SD debug code.
661 kes Do find_a_volume() each time an unload is done.
662 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
663 and adds --with-db-port to ./configure.
664 kes Use Qmsg() in job.c watchdog callback.
666 kes Release main control rwlock if ABORTing.
667 kes Make watchdog connect timeout queue messages rather than sending
668 directly to avoid lock conflicts with the real thread.
669 kes Add const char in dbd.c to avoid compiler warnings.
670 kes Fix python compiler string warning. Note, IMO the GNU C++
671 compiler guys have made a *very* bad change to their compiler.
672 They now force all strings to be 'const' unless you explicitly
673 cast them, which is extremely ugly and ruins nice code as well
674 as creates a lot of useless work.
676 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
677 mt. This fixes bug #1116.
678 kes Add const in python files to reduce compiler warnings.
679 This may have to be backed out because of later compiler
681 kes Fix failure of 2drive-concurrent-test. Always read label;
682 clear_unload() only after drive is defined in acquire_for_read().
684 kes Generally clean up the manual tape loading code. The main
685 conceptual change is that when a volume is marked to be unloaded,
686 its volume name is retained, and it is only marked as unloaded
687 when either the autoloader says it is unloaded or another tape
688 is read on that drive.
690 kes Add debug code and refactor subroutine in stored/mount.c
691 kes Fix format problem in bscan output reported in bug #1105.
692 ebl Fix get_next_volume_for_append logic with autochanger
693 - use pruned volumes if found
694 - don't reset the inchanger flag after getting a recycled volume
696 Fix recycle_oldest_purged_volume to take InChanger flag in account
698 ebl Add mmap/unmmap implementation for tokyodbm under win32
700 kes Make first step toward eliminating globals from config
701 scanning. Also should be a workaround for FORTIFY_SOURCE
702 GNU C bug -- fixes bug #1042.
704 kes Apply duplicate job tests to restarted jobs.
705 kes Copy more data when restarting a job so that run
706 overrides are kept. This should fix bug #1094.
708 kes More word alignment cleanup.
709 kes Fix bug where SD did not ask operator if the device could not
710 be opened. Reported by Eric.
712 kes Add dbuser to DIR conf file (replaces user).
713 kes Add --with-db-password to ./configure
714 kes Fix regress to handle db_password.
715 ebl Add new 'status storage slots' that list autochanger
717 ebl Update vtape driver to compile only under Linux.
718 ebl Fix a bug when restoring with a wrong mediatype.
720 kes Eliminate ints from conf files and structures to avoid
721 word alignment problems
723 kes Fix bug reported by Scott Barninger where the bacula script
724 refers to scripts in the wrong directory. Needed to meet the
725 requirements of recent FHS location changes.
726 ebl Disable vtape for FreeBSD.
728 ebl Modify disk-changer to check if slot contains something before
731 ebl Fix vtape on win32 and debian.
732 ebl Fix autoselect patch (cause segfault).
734 ebl Fix autoselect option broken for a while. Fix #1089. Need some
735 work with StorageId to be able to use a particular drive in a
738 ebl Rename vtape to vtape.
739 ebl Update vtape driver.
741 ebl Modify vtape driver to avoid sparse file.
742 kes Add make clean of qt-source directory during ./configure
743 kes Store last block number written to tape in DEVICE and
744 use it for testing for correct last block on EOT.
746 Release Version 2.4.0:
750 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
751 This fixes bug #1095.
753 kes Add create_postgresql_database.sql to Win32 installer. Should
754 fix problem reported by Juilio Monteiro.
755 kes Get correct slot when auto unloading a device. This fixes bug
758 kes Fix multiple media restore.
759 kes Make DEVICE Slot private and access it via a method.
760 Allows better control over when it is set and cleared.
761 kes Fix possible seg fault if SQL error.
763 kes Add Martin's fixes to argument scanning for the estimate
764 command. This fixes bug #1093.
765 kes Add debug code to SD.
766 kes Fix renaming a Volume, which used the wrong Volume name.
768 kes If operator has rewind tape, print warning, release tape and
769 try once more. If tape is positioned somewhere, something went
770 wrong, so mark the tape in error and try once more. Previously
771 this error was fatal, now it produces an error message.
772 kes Ensure correct volume name displayed during restore
773 kes Ensure that Volume is mounted for restore.
775 kes Fix a few more Coverity reported problems.
777 kes Apply Allan Black's status dir job count patch.
778 ebl Add information about IMPORT/EXPORT slots in mtx-script.
779 kes Enhance a couple of SD debug messages.
780 kes Tweak unload flag setting and ensure it is set during swap.
782 ebl Fix #1091 about bad output in estimate command.
784 kes Modify autochanger locking to attempt to avoid race
786 kes Make sure device not busy before doing label command.
787 kes Display open() errors except when polling. Previously too
788 many were suppressed. This should fix bug #1070.
789 kes Fix Win32 reparse points. Bacula will not recurse into any
790 reparse point directory, including mount points, unless the
791 directory is explicitly mentioned at the top level (same as
792 with Unix). A file that is linked to another file will be
793 backed up -- much as Unix does for hardlinked files.
794 This fixes bug #1041.
796 kes Remove double quotes from ChangeLog and ReleaseNotes
797 kes Remove StorageId test when pruning and recycling (Eric's changes).
798 kes Remove old form of locking when getting volumes -- causes deadlock.
799 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
800 the name unique and to eliminate compile time error.
801 kes Add accurate.o to Win32 FD Makefile
803 kes Fix cats dll build on Win32 after db_update_job_end_record
804 calling sequence change.
805 ebl Switch to tokyo dbm instead of htable in accurate code
806 ebl Include tokyo dbm to bacula source tree
808 kes Fix buffer overruns detected by Coverity.
810 kes Tweak joblog display.
812 kes Implement --without-qwt
813 kes Fix layout of restore tree dialog
814 kes Add configure bat QWT libraries, so that bat can be built
815 with or without the QWT libaries.
817 ebl Add dummy tape driver for regression tests.
818 kes Make sure we unload the right slot when swapping.
820 kes Add debug times, reduce size of two-pool-changer test
822 ebl Tweak autoconf scripts for vtape
824 kes Improve SD reserve debug code.
825 kes Testing an improvement to free up volumes no longer in use.
827 kes Rework SD acquire for read to handle autochanger Volume
829 kes Implement regression that explicitly tests swapping a Volume
830 from one drive to another.
831 kes Enhance disk-changer to detect most error conditions.
832 kes Fix SD code so that it properly swaps a Volume between drives.
833 This fixes bug #1083.
835 kes Apply libdbi patch from Joao Freitas for regress and for
836 Bacula trunk. Regress now works with libdbi. Nice.
837 kes Apply .nobackup patch from bug #1077 submitted by
839 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
840 name into jobs cloned via the run directive.
842 kes Prevent a Volume that is being swapped from being freed from
843 the volume list. This will most likely fix, at least partially,
845 kes Fix strippath so that it does not get a buffer overrun and crash FD.
846 This fixes bug #1078.
847 kes Remove 50 millisec wait in SD that broke debugger.
848 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
849 that a job may run, counted from when the job was scheduled.
850 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
851 a job may block waiting for a resource, counted from when the job starts
852 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
853 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
854 that implements multiple commands per line in the console when using
855 readline. Modify the default to use a semicolon as the command separator.
857 ebl Fix SQL query in migration code.
858 ebl Make accurate mode with hash disk pass regression tests
860 ebl Implement first cut of accurate backup with hash disk.
862 kes Force unload of volume when wrong volume mounted in SD.
864 kes Fix bat seg fault at termination.
865 kes Add Bacula generated version to bat about box.
868 kes Experiment with allowing multiple read jobs.
869 kes Move final volume swapping code to DCR method and
870 call it from acquire_for_read().
871 kes When wrong volume is mounted during read, unload_autochanger.
873 kes Integrate the libdbi changes from Joao Henrique Freitas
875 kes Stop searching for Volumes in SD askdir if DIR returns the
876 same volume name twice in a row.
877 kes Close bat console windows first to eliminate error message
880 kes Tweak the swap Volume from one drive to another code so that
881 it now seems to work.
882 kes Resolve several problems with recycling that broke the new
883 code (these problems are in 2.2.9 as well).
884 kes Remove the volume lock when calling the sysop code.
885 kes Don't mark a reserved volume with no writers as unused otherwise
888 kes Rework class structures for VOLRES, DCR, and DEVICE to make
889 the method names a bit more logical, and for more logically
890 handling the responsibilities.
892 kes Remove redundant code in terminating the scheduler that just
893 causes a seg fault in many cases.
894 kes Cleanup releasing a volume and make it a DCR method.
895 kes Improve algorithm for detecting pre-reserved volume and
898 kes Tweak volume swapping code so it works.
899 kes Correct name overloading in mount.c
900 kes Replace released flag in VOLRES with reserved and add access
901 methods for the VOLRES class.
902 kes Prevent volume from being released while being swapped.
903 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
904 plugin that add %w (where) and %r (replace flag) editing to
906 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
908 kes Refactor parts of stored/mount.c
910 ebl Add sanity checks for VolWriteTime and VolReadTime
911 ebl Take care of bad clock changes while computing VolWriteTime
912 and VolReadTime. This should fix or limit #1066
913 kes Correct error string numbers in dird/catreq.c
914 kes Restructure reserving, acquiring, and mounting volumes. Calls to
915 autochanger are deferred for mount.c -- simplifes the code.
917 kes Do not prune any running job. It just fails the job.
918 kes Lock the volumes when changing dev->reserved_device and marking
919 the volume unused otherwise the device can get reserved by
920 another job before the volume is released, thus blocking it.
922 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
923 kes Fix bug #1063, reuse of freed ptr in list nextvol.
924 kes Release regex compile buffer in filed/job.c
925 kes Add proper type of const char in sql_create.c
926 kes Turn off debug in daemon termination routines
927 kes Move free_volume_list() before devices are freed in stored.c
928 kes Fix reference to uninitalized stack variables in bregex.c.
929 This should correct bug #1067.
931 kes Fix possible seg fault in SD when freeing a volume entry.
933 kes Implement unload_dev() before swap device.
934 ebl Add statistics prunning with option and menu
935 kes Separate unload_dev() from unload_other_device() in autochanger.c
937 kes Apply patch from bug #1069 that corrects spurious error messages
938 when ACLs enabled on SGI but no ACL exists.
939 ebl Fix small segfault in bacula-sd when debug level is 500
940 kes Modify run_program() and run_program_full_output() to use
941 call by reference for the results string. This corrects a long
942 standing problem where the address of the string may be changed
943 in the subroutine but not in the calling program.
945 kes Re-enable code to remember last volume mounted on a non-tape
947 kes Add patch supplied in bug #1068 that fixes a SD crash when using
948 a Virtual autochanger.
949 kes Generate correct JobMedia records during spooling/despooling when
950 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
951 <tih@hamartun.priv.no> for excellent analysis and testing.
953 kes Tweak hash algorithm for htable using Martin Simmons idea
954 for doing a circular shift.
955 kes Remember what volume is in VTLs (previously turned off for
957 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
958 pointed out some problems in creating JobMedia records during
959 spooling with concurrent jobs. Fix the problem by updating the
960 start file position before despooling and generate a jobmedia
961 record at the end of despooling.
963 kes Fix handling of JobMedia records during spooling and when a
964 Volume is changed without actually writing data to the Volume.
966 kes Rework certain SD locking based on gdb tracebacks of deadlocks
967 sent by Eric. This code now uses only the volume_lock() rather
968 than the reservations lock when at EOM and acquiring a new
970 kes Ensure only one exit point in several subroutines.
972 kes Implement bsock code to permit locking. Use the new code in Verify
973 in the FD to prevent the heartbeat thread from disrupting the Verify
974 data sent to the Dir.
975 kes Modify SD locking to eliminate locking the reservations system from
976 outside the system. Use the volume lock when getting media data
977 and reserving a new volume at end of media.
978 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
979 when SD starts are not locked into place.
981 kes Fix error compiling runscript code on 64 bit machines.
982 kes Tweak Win32 mount point code.
983 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
984 cleared giving bad file estimate).
985 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
988 kes Keep Schedule run lists in order as suggested by
991 kes Implement autostart scripts for Debian.
992 ebl Implement upgrade catalog scripts.
994 ebl Apply jobstat patch for long term statistics. Have to implement
995 purge stats command and upgrade scripts.
996 kes Fix mtx-changer.in for broken Debian mt program.
998 kes Fix large number of JobMedia records reported by Eric Bollengier.
1000 kes Apply doc fix from bug #1062.
1001 kes Resolve crash and improper restore wx-console Win32 restore
1002 GUI. Fixes bug #1065.
1003 kes Update Win32 wxWidgets to latest version.
1004 kes Attempt to do correct handling of Win32 mount points. Should
1006 kes Fix Win32 FD backup/restore memory leak due to improper termination
1007 of BackupRead/Write. This fixes bug# 1038.
1009 ebl Reduce memory usage for accurate backup, working only with ctime
1010 and mtime. (not all Lstat field)
1011 About 40MB for my Linux system (400.000 files)
1013 kes Add dcr->reserved_volume flag that allows us to release a volume
1014 even if it is not vol->released. This allows maxvol2 to work when
1015 Volumes expire and we are already writing to the device (i.e. a
1016 volume is pulled out from under us by another job terminating after
1017 we reserve the drive).
1019 ebl Permit multiple command/console per runscript definition.
1020 RunScript { command = /bin/true ; command = /bin/false ... }
1021 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
1022 (restart an application) just after the VSS snapshot on windows.
1023 kes Don't zap dcr values during release_volume() as they might
1024 have the next Volume to be mounted.
1025 kes Fix AIX prototype.
1027 kes Second cut of drive switching during backup.
1029 kes Fix Win32 build.
1030 kes Update Win32 version of wxWidgets to most recent version.
1031 kes Tweak Copy job details.
1032 kes Rework dir_find_next_appendable_volume to make a bit more effort
1033 to find a suitable volume before giving up.
1035 kes Make ask_sysop_to_create... to return if waken from wait.
1036 This helps get out of blocked conditions.
1037 kes Experimental implementation of switch_device in reservations.
1038 kes Implement FD version to allow easier protocol changes.
1039 kes Add Plugin Options string -- not yet passed to FD.
1040 kes Implement PluginOptions ACL.
1042 kes Attempt to correct problems with restores with autochangers and
1043 use counts going negative
1044 kes Rework SD status command and implement API for bat. Implements
1045 header, runing waitreservation, devices, volumes, spooling,
1046 and terminated status keywords.
1047 .status storage=xxx <keyword>
1048 kes Clarify TLS error message by adding double quotes around name.
1049 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
1050 kes Pass jcr to tls routines so debug messages can be handled better.
1051 kes Rework jobq resource allocation code, and possibly fix a bug
1052 that caused reference counts to get out of sync.
1054 kes Rename fd/dir plugin to use Bacula standard underscore.
1055 kes Plugin work -- bring dir up to fd level.
1056 kes Start implementation of VTL code
1057 kes Fix Win32 build after adding new cats subroutine.
1059 kes First cut at Duplicate Job implementation.
1061 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
1062 kes Start PluginOptions string, and refactor a bit of ua_run.c
1063 ebl Apply Allan patch that permit to reset recyclepool.
1065 kes Test patch -- possible fix or improvement for bug #1053
1066 kes Refactor FD and SD status commands to permit new API code in
1067 SD, and to fix Win32 build.
1068 kes Win32 build is now working.
1070 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
1071 some ideas in patch from Scott Bailey.
1072 kes Begin implementation of duplicate Job control.
1073 kes Fix some of Win32 build after recent additions.
1074 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
1075 which causes the FD to detect whether or not the OS has the
1076 honor no dump bit (*BSD systems), and if so, to skip backing up
1077 any file with this bit set. The feature is enabled by setting
1078 'honor no dump flag = yes' in the Options section of a FileSet.
1080 kes Correct po warning message with datarootdir
1081 kes Implement more code in dird.c to put configuration parsing in
1082 a class rather than use globals.
1083 kes Restructure SD status command for implementation of bat API
1086 kes Suppress incorrect 'Will not descend from x into y' messages.
1087 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
1088 daemon globals used by parser.
1089 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
1091 kes Fix free of plugin_list when none exists.
1093 ebl Apply accurate project patch.
1095 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
1096 on non-mempool object)
1097 kes First cut of converting FD .status to work with bat API.
1099 .status client=XXX header
1100 .status client=XXX running
1101 .status client=XXX terminated
1102 kes Implement first cut of Copy Job.
1103 kes Implement Catalog in Pool resource. It overrides catalog specified
1104 in the Client resource.
1106 kes Apply patch (with some difficulties) from Joao Henrique Freitas
1107 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
1109 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
1110 ftruncate() actually works. In the case of some (cheap) NAS devices,
1111 it does not, and so recycling NAS Volumes does not work. The code
1112 simply unlink()s the file, then recreates it. This fixes bug #1011.
1114 kes First incomplete cut of big malloc blocks for htable.
1115 kes Tweak plugin code.
1117 kes Plugin debug code + tweak a couple bat dialog layouts
1119 kes Fix creating first JobMedia record during Migration to include
1120 proper index. This caused slow restores of migrated jobs.
1121 kes Temp fix to plugin name file_index.
1122 kes Bacula backed up and restored a MySQL database.
1124 kes Implement plugin restore.
1125 kes Implement parsing of db_driver to give db_type index.
1127 kes First cut of plugin restore code.
1128 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
1129 and do not strip paths on symbolic links.
1130 kes Set catalog backup database and user name from values specified on
1131 the ./configure line.
1132 ebl Fix #1031 about wrong pool source information in job report.
1134 kes Fix Win32 build.
1135 kes Remove a redundant jcr argument to find_files, match_files, and
1137 kes Implement '.status dir header|scheduled|running|terminated' that
1138 prints the requested status section. With the exception of the
1139 header, the other reports have fields separated by tabs (\t).
1141 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
1142 a resource embedded run command to find a since time if no explicit
1143 since time was supplied on the command line.
1144 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
1145 that updates the state file at job termination time in addition to
1146 when the daemon terminates.
1148 kes First version where a plugin did a backup.
1149 bpipe-fd.so created a backup file, wrote a test
1150 string to it, and Bacua could restore this fabricated file.
1152 kes Implement DB Driver = string for the DBI driver.
1153 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
1154 kes First cut of code for loading Win32 plugin dlls. Implement
1155 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
1156 and implement a dlfcn.h file based on opengroup's definitions of
1159 kes First cut plugin directives.
1161 kes Apply patch from bug #1049 to prevent stripping the path on a
1163 kes Attempt to fix bug #1047 where stripping a path corrupts the
1164 heap. Waiting for feedback.
1165 kes Correct the Mount message not to suggest labeling a new tape
1166 when doing a restore. Submitted by email by John Stoffel.
1167 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
1168 FD by using casting. Reported in bug #1042.
1170 kes A bit of crypto cleanup. More later.
1172 Release Version 2.2.8
1174 kes Apply patch from Martin to correct bug #1040, bscan sets existing
1176 kes Fixed important spelling error in doc -- bug #1045.
1178 ebl Fix bextract to be able to extract non-portable Win32 data to
1180 kes Move initialization of read/write res lock earlier in the code.
1181 This fixes the crash with a null conf file. This fixes bug
1183 kes Redefine CURES in lib/parse_conf to be URES and move it all
1184 into lib/parse_conf.c -- this responds to bug #1042, but does
1185 not fix it. The fix is not to compile with FORTIFY_SOURCE.
1186 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
1187 the trunk SVN. I don't think this was reported as a bug.
1189 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
1191 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
1193 kes Add DataDespooling and DataCommitting status (committing is
1194 the last despooling).
1195 kes Finish implementation of new reservations code noted below.
1197 kes Fix bsnprintf for float point numbers. I broke recently when
1198 parameterizing some variables. This fixes bug #1036.
1199 kes Undo recent reservations changes ... will apply them later
1200 when they work better.
1202 ebl Fixes #1034 which cause mysql to hang the connection after 8h
1203 ebl Change default statistics target of filename.name and path.path
1204 fields for PostgreSQL. This speeds lookup by indexes. Thanks
1206 kes A few more tweaks to new reservation code. Make sure to clear
1207 vol released flag when retaking volume. When reading label and
1208 label is bad mark volume unused. When recycling, mark volume
1209 unused so it can be renamed.
1211 kes Fix reserve_volume() so it doesn't release a volume in use
1212 (i.e. a volume entry not marked released). This should be
1213 the last part needed to fix bug #1018.
1215 kes Move Heartbeat documentation from Job to Director resource.
1216 This fixes bug #1033.
1218 kes Fix existing switch drive SD code to call autochanger to release
1219 any old volume. This must be done to keep the autochanger from
1220 releasing subsequently newly reserved volumes in doing a close().
1221 This should fix bug #1018.
1222 kes Fail if attempting to get console input in batch mode. This
1223 should help fail RunScript console commands that are incomplete.
1224 kes First cut implementing switch_drive() in SD (not actually called).
1226 kes Implement first cut running console commands in a RunScript.
1228 ebl Fixes bug #1028 where 'Selection Type' option was not usable
1230 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
1233 Release Version 2.2.7
1235 kes Add new free_tls() entry point so that Win32 builds.
1236 kes Fix compile warning in src/lib/util.c
1237 kes Fix entry point for edit_job_codes() so that Win32 builds.
1238 kes Fix seg fault Frank Sweetser reports in regression testing
1239 on his systems. The problem was that the original author of
1240 bsnprintf.c did not take into account the side effects of
1241 using ++x in the argument to a #define.
1242 kes Make SD protocol backward compatible with version 2.2.x.
1244 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
1245 because Bacula no longer restores sockets.
1246 ebl Always use ignorecase fileset option on win32 FD.
1248 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
1249 that implements double quoting include names in conf files,
1250 and also allows piping input by having the first character
1251 be a vertical bar (|).
1252 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
1253 that implement %f in RunScripts to pass the FileSet name.
1254 kes Skip leading | when lex input comes from a pipe as suggested
1255 by Michael Stapelberg <michael@stapelberg.de>.
1257 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
1258 Nerijus Baliunas <nerijus@users.sourceforge.net>
1260 kes Implement Plugin Directory and plugin events.
1262 kes Implement a security enhancement: TLS authentication but no
1263 encryption. Enabled by setting 'TLS Authentication = yes'.
1264 Note when this is on, TLS encryption is turned OFF!
1266 kes This patch corrects a problem where the maximum concurrent storage
1267 jobs counter gets out of sync during restore jobs causing jobs to
1268 'wait on max Storage jobs'. This patch fixes bug #1009.
1270 kes This patch fixes bcopy so that it produces correct Volumes.
1272 kes This patch eliminates spurious output to the console during a VerifyVolume
1273 job that contains encrypted data. It fixes bug #1024.
1275 kes This patch prevents the 'status dir' command from trying to use a scratch
1276 volume and possibly moving it from one pool to another. This patch fixes
1279 kes Add new include to postgresql.c suggested by Marc Cousins so
1280 that it compiles correctly with pgre version 8.3.
1282 kes Fix --archivedir addition to configure. Replace it with
1283 --with-archivedir in configure.in This fixes the regression
1285 kes This patch fixes bug #1012 where the job is canceled because
1286 of Max Run Time exceeded when the job has not yet started.
1288 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
1289 one 'part' to write. Instead of each part being stored on disk,
1290 written to DVD, then deleted from disk, all parts are written to disk,
1291 and only the last is written and deleted from disk.
1292 kes This patch fixes the status command to include the formating string for
1293 JS_AttrInsterting. It fixes bug #1021.
1294 kes This patch should fix the Mac OS X build problem on the latest
1295 Darwin, where sys/types.h was not included correctly (apparently
1296 due to a change in the Mac headers). The solution was to explicitly
1297 ensure that it is defined for the ./configure.
1298 This patch also has a rebuild of configure that includes the Debian
1299 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
1300 kes This patch should ensure that queued messages to the console are
1301 displayed as soon as possible. It should fix bug 1007, but has been
1302 reported not to work.
1304 kes This patch fixes the infinite loop when trying to increase the
1305 maximum number of volumes in a Pool during the add command.
1306 This patch fixes bug #1008.
1308 Release Version 2.2.6
1310 db Remove extra data on estimate command in joblist for bat.
1312 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1313 really change anything, but is the beginning of doing it *right*.
1314 To do it completely right the LastWritten date must be passed to
1315 the SD, but it is not yet done.
1316 kes Minor tweaks to some bat restore SQL.
1317 kes This patch fixes bug #1003 where putting the message output from
1318 a Verify job into the catalog results in a recursive loop. The problem
1319 seems to show up only with postgresql (to be verified).
1320 kes Correct %x to %p in postgresql debug statement.
1322 kes Fix bug #942 where lots of emails where generated when the heartbeat
1323 interval was low and Bacula wanted a different tape from the one in
1326 ebl Add new SD despooling attributes and Dir inserting attributes
1327 job status codes in the catalog (Status table).
1329 ebl Use qmake-qt4 instead of qmake when available (debian system).
1331 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1332 that passing the password via the command line (arg 3) is insecure.
1333 This responds to bug #990 (it doesn't fix it).
1335 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1336 kes Fix a crash in bat when it cannot connect to the Director for example
1337 if the Director is not running.
1338 kes Remove redundant INDEX (JobId) from File table in the trunk.
1339 This fixes bug #992.
1340 kes Make explicit exception to GPL in LICENSE to permit linking
1341 the Win32 FD with Microsoft VSS code.
1342 kes Apply the Solaris package patch from
1343 Masopust, Christian <christian.masopust@siemens.com>
1344 kes Apply the patch to optionally add a timestamp in the debug output
1345 submitted by Mariusz Czulada <manieq@wp.eu>.
1347 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1348 backend (sql_strerror). Fixes bug #989
1350 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1351 It applied with no problems.
1352 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1353 awk are on the path.
1354 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1355 since the status is returned on stderr on Solaris.
1356 kes Activate Close button on tray-monitor window. This fixes
1358 kes Check for NULL item in parse_conf.c before calling it. In the
1359 case of Device, there is no item and this caused a seg fault when
1360 Device appears in the conf file.
1361 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1362 avoids pulling in config.h multiple times in some new code.
1364 kes Fix spurious warning message printed when creating a volume with
1365 a LabelFormat. This fixes bug #976.
1367 Release Version 2.2.5
1369 kes Add JobId in place of Job name in all the Jmsg() output.
1370 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1372 kes Make maxvol-test and new more strict maxvol2-test work.
1373 kes Print JobId in all Jmsg() job output.
1375 kes Add new SD despooling attributes and Dir inserting attributes
1376 job status codes. This fixes bug 961.
1377 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1379 kes Fix doc issue. This fixes bug #963.
1380 kes Fix listing performance problems in bat. Pointed out by
1382 kes Remove old debug code.
1383 kes Fix bat code that tests for Win32. This should fix bug #968
1384 kes Query 5 list wrong Vol after migration. This fixes bug #960
1386 ebl Fix #969 where user can't change Replace option in restore menu.
1388 kes Save jcr in thread specific data (tsd) for each thread.
1389 kes Make Dmsg() print JobId as -%u.
1390 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1391 for the thread if it exists.
1392 kes Remove old reservation debug jid code.
1393 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1394 ebl Add an option that permit to specify spool size in job
1395 definition. (Applying patches/testing/spoolsize_per_job.patch).
1396 You must upgrade SD and DIR at the same time.
1397 dvl Add new configuration item --archivedir
1398 dvl Adjust regression tests to use tmp not /tmp. This will allow
1399 multiple concurrent runs of the regression tests.
1401 kes Fix race condition that drops final block written to volume.
1402 This happens in rare cases with multiple simultaneous jobs
1403 when the Volume fills. This fixes bug #964. May be related
1404 to bug #935 and possibly #903.
1405 kes Eliminate more strerror() and replace with bstrerror().
1406 kes Remove BSD getopt and replace with unrestricted IBM version.
1407 kes Fix Win32 build for changed calling sequences.
1408 kes More tweaks to the mount volume routines to get everything
1409 right. Changed variable name from find to have_vol, which is
1410 much easier to understand.
1411 kes Enhance btimer debug code.
1413 kes Fix FD->SD authorization failure, which was due to spurious
1414 wakeups from a pthread_cond_timedwait(). Simply check the
1415 predicate before continuing. This fixes bug #953.
1416 kes Add const char where needed (more to do). Remove temp debug code.
1418 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1419 kes Don't overwrite error message in check_tables_version.
1421 kes Unlock batch insert tables with same calls used elsewhere.
1422 kes Allow starting 59 jobs a second.
1423 kes Make SD session key more random.
1424 kes Add retry for SQLite opening db if it fails. Probably helps
1426 kes Suppress extra error messages during batch insert failure.
1428 kes Add jcr to timer packets so if killed message can be sent to job.
1429 kes Add JobId to all Dmsg() output.
1430 kes Put some FD auth code on dbglvl rather than fixed.
1431 kes Return insert attributes error message in db msg buffer to avoid
1432 false error messages. Helps fix bug #966.
1433 kes Separate batch init error messages. Probably helps fix bug #966.
1434 kes Make SD code that contructs attribute insert check string lengths
1436 kes If Dir gets an error during inserting attributes, cancel SD.
1437 This reduces unnecessary error messages.
1439 kes Correct search boolean for getting Volume info
1440 ebl Cleanup batch insert code. Probably fixes bug #965.
1441 kes Back out one small change to the reservation system (reserving a volume).
1442 kes Rework how a Volume is mounted. It is now much more intelligent and
1443 will always attempt to use any mounted volume if possible and reduces
1444 calls to the Director asking about volumes.
1446 kes Turn off some code when batch insert not enabled.
1447 kes Edit FD name in connect error messages.
1448 kes Rework the reservation system to take into account that the Director
1449 might give us a Volume that is different from the current one being
1450 used, and to ensure that we don't exceed Maximum Volume Jobs.
1451 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1452 fatal error with multiple jobs running'
1453 kes Add more debug code in reservation system.
1454 kes Implement maxvol-test to check bug #947.
1456 kes Add code to handle tray monitor separated from Win32 FD.
1457 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1459 kes Add missed return in fixing verify bug -- trunk only.
1460 ebl Fix a command parser issue causing a director segfault.
1461 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1462 This fixes bug #954.
1463 kes Increase the max block size to 4MB fixes bug #957.
1464 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1465 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1466 is not properly mounted (recognized) during a poll.
1467 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1468 Job that has differences reports Verify OK.
1469 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1471 ebl Add an option to operate on all pools with update vol parameters.
1472 This complete the project 20. Patch from Nigel Stepp.
1473 ebl Add history support to bconsole when using readline.
1474 Using Ctrl-D to exit doesn't update .bconsole_history
1475 kes Modify new volume algorithm to use max MediaId for generating next
1476 volume number rather than the count of Volumes. This should essentially
1477 eliminate the failure rate if some volumes were deleted. Bug #921.
1478 kes Begin implemention of Optimize Job Scheduling.
1479 kes Implement restore callback that Dirk and I agreed on for bat
1480 restore. This fixes bug #928. Restore of backup of zero files fails.
1481 kes Fix SQL Catalog logging which broke with new db_escape_string
1484 Release Version 2.2.4
1486 kes Fix bacula_cats.def for new db_escape_string().
1487 kes Increase size of name string when FD making connection to SD.
1488 May fix bug #953. FD->SD connection failure.
1490 kes Add code to help Dan debug 2drive-incremental-2disk test.
1491 kes Add code to try to fix bug #908.
1492 kes Add waits to multiple exit detection code to try to force pid
1493 file to always be deleted.
1494 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1495 This fixes bug #950.
1496 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1497 trying to switch drives by checking for blocking before unblocking.
1499 kes Cancel storage daemon in all cases where FD reports error. This
1500 should fix virtually all cases of bug #920.
1501 kes Fix db_escape_string() for MySQL which did not compile.
1503 kes Fix error message that was clobbered when Dir tells SD it does not
1504 have write permission on Volume. This should fix a minor point
1505 in bug #942, but not the main problem.
1506 kes Add code to cancel job in SD if FD connection fails. This should
1508 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1509 dvl Pass jcr and db into db_escape_string() to enable better escaping
1511 kes Fix migration code to get correct Volume name with multiple volumes
1512 by skipping |. Fixes bug #936.
1513 kes Implement patch supplied by Landon to fix bug #944 where using
1514 TLS with bconsole uses 99+% of the CPU.
1515 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1517 kes Move patches into patches directory.
1519 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1522 ebl Using 'm' in bconsole will show messages like before,
1523 and not memory usage.
1524 kes Fix bug #935, and probably also bug #903 where files were not
1525 restored. MediaId was not properly set in JobMedia record after
1528 kes Suppress chown and chmod error messages if the FD is not running
1531 kes Apply Martin Simmons' patch that should turn off the new API usage
1532 when batch insert is turned off allowing building on older
1534 kes Add ./configure search in qwt-qt4 for qwt package
1536 kes Bacula is now free of 3rd party GPL copyrighted code!
1537 kes Remove idcache.c
1538 kes Add guid_to_name.c/h which replace idcache.
1539 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1541 ebl Detect if new PosgreSQL batch insert API is present.
1542 kes Correct incorrect mempool call causing Director crash. Occurs on
1543 systems without va_copy().
1544 sb Update spec files for 2.2.1 release
1546 kes Fix memory pool call in ua_output.c. bug #934.
1547 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1548 Add test program to fnmatch.c
1550 kes Integrate patch to README.vc8 from
1551 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1552 edit it to get it into Unix patch format.
1553 kes Implement mkpath.c to replace old FSF makepath.c
1555 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1557 Release Version 2.2.1
1559 kes Update POTFILES.in
1560 kes Cleanup a few underquoted AC_DEFUNs in configure
1561 kes Apply patch from Martin Simmons that adds a test for va_copy to
1564 kes Fix bug #921 by increasing the number of tries to create a new volume
1566 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1567 can be called multiple times. Implement a version for machines
1568 without va_copy() that gets a big buffer.
1570 kes Integrate more portable zone offset code into bsmtp.c
1571 Submitted by Attila Fülöp.
1573 kes Fix bad SD->FD return status reported by
1574 (James Harper) <james.harper@bendigoit.com.au>
1575 ebl Fix a bug in read_close_session which return random status
1576 thanks to James Harper
1578 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1579 and directory names during restore of single file/directories.
1580 kes Add sanity checks to .sql command when string is empty. Hopefully
1581 that will resolve Dirks Director crash.
1583 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1584 in the bsmtp chat subroutine when debug is >= 10.
1586 kes Fix Director crash when running bat SQL queries.
1587 kes Add David's notes on Item 8: Copy pools.
1589 kes Rework projects file to be current and ready for a vote.
1590 kes Enhance lex scanner error message.
1592 kes Tweak LICENSE file to mention BSD code.
1593 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1594 if specified on the ./configure.
1595 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1596 This class is intended to allow us to open a second bsock to the
1597 Director while in the restore subdialog.
1599 kes Fix configure to create bat Makefile before creating dependencies.
1600 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1601 kes Add a tooltip to the tray monitor.
1602 dvl Set the Director's PID file before dropping privs. This fixes
1605 kes Update AUTHORs file
1606 kes Increase the default max concurrent jobs to 20 in FD and SD to
1607 correspond with the default .conf files.
1608 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1609 some different, of the same file created by RN when porting the
1611 kes Rearrange some of the Win32 directories and the placement of the files
1613 kes Set DEVELOPER flag in version.h
1615 ========================================================================
1616 Release Version 2.2.0
1618 kes Apply a second doc patch from Marc.
1619 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1620 improves the tips section that discusses how to setup multiple
1623 kes Update bat README file.
1624 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1625 corrects a typo in the Recycle status check in db_find_next_volume().
1626 This will probably fix a number of annoying problems with multiple
1628 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1629 bnet calls -- no functionality change.
1631 kes Modify the Verify output to specify if files are missing on
1632 the Volume(s) or disk. Fixes confusion in bug #916.
1633 kes When more than one Volume is read in a migration job, the last
1634 Volume bytes reported are from the last read volume rather than
1635 the last written volume. Fixed. This fixes bug #910.
1636 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1637 It previously printed New Recyle flag is: no. This fixes bug
1640 kes Correct seg fault when switching tape drives during restore.
1641 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1642 be used until after 2.2.0 release.
1644 kes Remove fnmatch() in SD that permitted wild card specifications.
1645 This fixes bug #914.
1647 kes Fix %g in filename returned by SQL for browse tree reported by
1649 kes Fix configure so that it puts config.out in the cwd rather than
1651 kes Attempt to fix the locking problem reported by Eric in bug #906.
1652 kes Make berrno class to leave errno unchanged after constructor call.
1653 kes Make bnet_server use the heap rather than the stack to allocate
1654 its socket fd pointers to avoid a crash at termination. Problem
1655 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1657 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1658 and putting it in depkgs-qt along with Qt4.3.
1660 kes Rework code in acquire.c that switches drives for reading when
1661 the Media Type does not match. This should fix bug #906
1663 ebl Fix a director segfault during job setup #907
1664 kes Correct seg fault in postgresql when first operation returns no
1665 rows. Fixes Dirks File browser problem seg fault with bat.
1667 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1668 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1671 kes Implement PopUp YES/NO dialog for bat.
1673 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1675 kes Correct RunScript to terminate job in FD on failure.
1676 kes Change abort_on_error and AbortJobOnError to fail_on_error
1677 and FailJobOnError in RunScripts.
1678 kes Minor tweaks of code formating in RunScripts, principally to
1679 avoid depassing 80 columns.
1681 kes Eliminate one #ifdef Win32 in bsmtp
1682 kes Implement grow tool to grow a file for testing very large databases.
1683 kes Add big-vol-test to test Bacula seeking with > 5GB.
1686 kes Modify find_next_volume() to return all values in Media record.
1687 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1691 kes Update Release notes
1693 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1694 Warning, in previous beta version, all media get from scratch keep their
1697 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1698 This should fix bug #842. Made a note to look at removing the temp
1699 files at the end of the install.
1700 kes Add ability to mount and unmount a file device providing it is
1701 marked as being removable and has the appropriate mount and unmount
1702 commands defined in the Device resource. This fixes bug #830.
1703 kes When applying a storage override, release all previous storage
1704 definitions rather than just prepending the new storage.
1705 This should prevent a good deal of confusion.
1707 kes Implement ./configure search for qwt libraries.
1709 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1710 Win32 FD. This should fix bug #893.
1711 kes Remove an unnecessary beep in Win32 init code.
1712 kes Update copyright dates in Win32 executable about boxes.
1713 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1714 code with a BSD getopt.c and getopt.h.
1715 kes Remove sched.h from the Win32 compat directory -- not used.
1716 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1717 need to shut it down, do it through the services panel or the command
1719 kes Remove some inappropriate Bacula FSFE copyrights.
1720 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1721 kes Fix regress config non-portable test as pointed out by
1722 Florian Heigl <florian.heigl@gmail.com>
1723 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1724 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1726 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1727 Reported by Frank Sweetser.
1731 kes Fix client-only build.
1732 kes Integrate client-only fixes for bsys (initgroups) and conio from
1733 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1734 kes Make arguments to get_scratch_volume() in same order as other
1736 kes Rework the prune_volumes() subroutine so that after purging and
1737 no volume found in desired pool, it will check for a scratch
1738 volume. This prevents recycling the whole scratch pool.
1739 kes Add code to status storage to print boffset_t (largefile support).
1741 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1742 kes You now need a --with-qwt=<dir> to be able to build bat.
1743 kes Update src/win32/cats/bacula_cats.def to include the new
1744 db_get_query_dbids() call on Win32.
1746 kes Correct a problem when selecting a scratch volume and moving
1747 it to another pool that lost some columns.
1748 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1749 kes Enhance Autochanger error messages to include Volume and device name.
1750 kes Rework prune_volumes() code to take account of InChanger flag,
1751 and to handle recycling volumes going to the Scratch pool and
1752 current pool because the RecyclePool directive.
1753 kes Implement a better and more efficient db_get_query_dbids() to
1754 handle creating and passing back a list of DBIds.
1758 kes Start work on new more efficient DBId subroutine. First use
1759 will be for recycling volume to Scratch inchanger.
1760 kes Increase number of JobIds in pruning from 1000 to 10000.
1761 This to be replaced by above routine.
1762 kes Begin implementation of building Qt4 on Win32.
1763 kes Correct typo in fix I added for bad TLS shutdown.
1764 kes Pull 2.0.3 patches into patches directory.
1765 kes Update Release notes. Include qt-console in line count.
1766 kes Update Projects file.
1768 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1769 bug in migration code where a job that spanned two volumes
1772 kes Implement new BST_DESPOOLING blocked state. Change from locking
1773 during despooling in SD to blocking. This means that other threads
1774 can work with the device structure, in particular the reservations
1775 system while despooling.
1777 kes Fix return in reservation message queue that missed clearing
1778 the jcr lock (implemented 26Jun07 below).
1779 kes Rename a number of dev methods to make locking function names
1781 kes Document locking in lock.c. Move lock structures to new file
1784 kes Move reservations message lock to lock jcr only this
1786 kes Move main SD locking code into lock.c (new file).
1787 kes Update Win32 build to include lock.c
1791 kes Dirk committed the qwt library code for drawing graphs in bat.
1792 kes Tweak install of qwt so that it is integrated with ./configure.
1794 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1795 out by Eric (my typo).
1796 ebl Fix configure.in to get batch mode enable
1797 kes Return correct string from authenticate.cpp in bat when connecting
1799 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1800 spurious line drops when using TLS.
1801 kes Do not file reparse points when restoring a file that already
1804 kes Implement Windows reparse points -- similar to directories, but
1805 we do not descend into it. This is a first cut. They seem to
1806 be backed up, but restore is not yet tested.
1807 kes Remove restore_blocking in tls code when shutting a socket to leave
1808 it in blocking mode. Hopefully this will fix the encryption bug
1809 reported by Frank Sweetser.
1810 kes When opening a file for backup, tell the OS that we are going to
1811 read it sequentially -- optimization.
1812 kes Change variable names in authenticate_director() to not conflict
1813 with member names in bat. Caused great confusion with compiler,
1816 kes Queue openssl error messages in case of comm problem.
1817 kes Do shutdown() call if socket terminated.
1818 kes Remove some duplicated code in tls.c
1819 kes Move more of the bsock member variables into private and access
1821 kes Add Frank Sweetser's tls-test to the regression suite.
1823 kes Add Swedish sv.po file
1825 kes Don't print clock skew message in FD if less than 3 seconds diff.
1826 kes Add a bit of VSS info to status client.
1827 kes Implement a first cut of Vista VSS, using Win2003 code.
1829 Release: 2.1.20 beta
1831 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1832 loaded tape but uses first drive).
1833 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1834 This was indeed a Win32 issue.
1836 kes Simplify search of autochanger for in-use Volume.
1837 kes Fix exit condition of check for in-use volume. kes Remove
1838 inappropriate my_postgresql_free_result() in db_close()
1840 kes Fix bad return in FD when encryption signature not found.
1841 Probably caused a crash.
1842 kes Inhibit missing encryption signature error messages for
1843 file types where no signature computed.
1844 kes Correct inverted check on autochanger in reservation system.
1845 kes Tweak debug code in autochanger reservation.
1847 kes Add some additional locking in the cats directory in subroutines
1848 that modify packet variables called from batch insert.
1849 kes Rework how dcrs are allocated. new_dcr() can now be called
1850 with an existing pointer, and it will simply clean it up.
1851 This allows the reservation system to test various different
1852 devices, and will permit easy device changes.
1853 kes A bunch of changes all over to handle new new_dcr() calling
1855 kes Work more on the Volume management in the SD. Remember Volumes
1856 for tape drives and for autochangers (even virtual disk changers).
1857 kes When looking at the Volume list to reserve a drive, handle
1858 autochanger names correctly by interating through the changer
1859 devices. Also call the Director to see if a Volume is suitable
1860 for the current job.
1861 kes Fix some bugs in bscan. Make sure all media records are written.
1862 Make sure that valid JobMedia records are written for disk files.
1863 Previously they were completely wrong.
1864 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1865 that the URLs don't change and so that the developers will all
1866 work off the same copy. Rebuild from scrach.
1867 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1869 Release: 2.1.18 beta
1871 kes Fix seg fault in FD from incorrect digest size.
1872 kes Fix argument to non-OpenSSL crypto.c subroutine.
1874 Release: 2.1.16 beta
1876 kes Remove a few malloc()s from the encryption code.
1877 kes Use the class calls to bsock in filed/backup.c and restore.c in
1878 place of the old bnet_xxx code.
1879 kes Implement code that does an on the fly calculation of the
1880 signing digest during restore of encrypted files. It makes
1881 a best guess at the algorithm, and if it is not correct, will
1882 then revert to the old code which reads the file after it is
1884 kes Implement at least one missing crypto stream in stream_to_ascii()
1885 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1886 #877 where a reload with bad syntax causes Dir to exit.
1888 Cut: 2.1.14 beta (not released)
1890 kes Do not free a volume on a tape drive until another volume is
1891 mounted and read, or the autochanger unloads the volume.
1892 This should help the SD re-use volumes that are already mounted,
1893 and should fix bug #886.
1894 kes Apply patch from user brettedgar that allows gnome2-console include
1895 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1896 kes Apply patch from Lucien Weller that fixes day of week calculation
1897 because of DST flag problem. Fixes bug #887.
1899 kes Move find_next_appendable_volume() to after acquiring a valid device
1900 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1902 kes Unable to reproduce bug 872. However added additional testing for
1904 kes Bug #874 resolved by documenting SQLite limitations.
1905 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1906 kes Bug #881 resolved by removing typo in mtx-changer script.
1907 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1908 approval. Added a link to the wiki on the web page, and implemented
1909 a backup from http://paramount.ind.wpi.edu
1911 kes Fix update allfrompool to pass pool name.
1913 kes Convert to pure GPL v2 license.
1914 kes Fix sscanf problems reported by Peter Buschman that caused
1915 a bus error on Solaris.
1916 kes Rework (simplify) the select prompt in bat.
1917 kes Move get_jobid_from_tid() into lib and create a
1919 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1920 should definitely fix the problem of lost error messages in the
1922 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1923 kes Eliminate tcpd.h from the project. Enclose the #include from the
1924 library with extern C ...
1925 kes Add print of signal name when a signal is trapped.
1927 Release: 2.1.12 beta
1929 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1931 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1932 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1933 makes SQLit3 run 30 times faster, though a bit less safe.
1934 kes Implement --with-batch-insert in configure and detection of thread
1935 safe libraries. It is on by default, but turned off if no thread
1936 safe library (e.g. SQLite 2) is available.
1938 kes Fix Bacula PostgreSQL buffer overruns.
1939 kes Do better checking for NULL results returned from PostgreSQL;
1940 implement retry for failed queries; clear results buffer after
1941 failed query. Hopefully this will correct the PostgreSQL failures.
1943 kes Implement algorithm to handle only one appendable volume with
1944 Prefer Mounted Volumes = no.
1945 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1946 returned from a query.
1947 kes Make volume lock recursive.
1948 kes Implement an additional volume reservation algorithm that
1949 starts by considering all reserved volumes then uses the
1950 old brute force algorithm of searching the resources to
1951 find a suitable device.
1952 kes Add new reservations debug code and refine the old code.
1953 kes Update the win32/dll/bacula.defs file.
1955 kes Tweak reservations algorithm to permit a few more cases, i.e.
1956 volume reserved, but on different drive, ...
1957 kes Enhance SD status to include Pool and Media Type for drive in a
1958 more readable format (a bit longer).
1959 kes Fix PostgreSQL double free.
1961 kes Minor refactoring of restore decryption code.
1962 kes Add code to smartall.c to detect double free of a buffer.
1964 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1965 so that bsmtp will create a correct email address (mailbox only).
1966 kes Modify 'memory' command so that the buffers are listed as 'In use'
1967 to avoid confusion with Orphaned buffers.
1968 kes I reworked the OpenSSL include/lib flags to be handled in
1969 the standard Bacula way, which should fix bug #863 concerning
1970 non-standard OpenSSL libraries.
1972 kes Implement Help Browser window for bat.
1973 kes Fix reload bug that reset StorageId to zero.
1975 kes Fix TLS #ifdefing when TLS turned off.
1976 kes Ensure that when labelling a tape with Slot=0 that InChanger
1978 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1980 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1981 add DISTINCT (required by PostgreSQL).
1982 kes Implement BSOCK authenticate_director() method. Eventually will
1983 authenicate all daemons.
1984 kes Move several more functions into the BSOCK class.
1986 kes Add code to tell the OS that we no longer need a cached
1987 file that we were reading. In findlib/bfile.c. Also,
1988 only cache files that we are reading. Thanks to
1989 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1990 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1991 kes Implement script to automatically generate cats and dll .def
1992 files for Win32 dll.
1993 kes Update README.mingw32 to include new .def file generation.
1994 kes Correct typo in UTF-8 error message as reported by:
1995 jhernandez <julianhernandez@gmail.com>
1996 kes Add additional sm_check() code on debug level 1.
1997 kes Set default debug level to 1.
1998 kes Trap SIGABRT in attempt to get traceback.
2000 kes Reduce bat connect timeout from 30 to 15 seconds.
2001 kes More restructuring and implementing BSOCK class in place of
2003 kes Remove a few unnecessary malloc() tests in crypto code.
2004 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
2005 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
2006 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
2008 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
2010 kes Fix Verify InitCatalog. The attributes were not pointing to the
2011 correct saved location.
2012 kes Implement message callback so that GUI is sure to get all
2013 daemon messages. Currently displayed in a dialog in bat.
2014 kes Ignore SIGUSR2 (Bacula timer) in bat.
2015 kes Apply regress patch from bug #859 to allow regress to work
2016 with Solaris compiler.
2018 kes Begin adding TLS support to bat.
2019 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
2020 clean up lex.c and make it more readable.
2022 kes Move more bnet functions into the BSOCK class.
2023 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
2024 kes Complete change of berrno strerror() method to bstrerror()
2026 Release: 2.1.10 beta
2028 kes Cleanup incorrect email addresses in bsmtp.
2029 kes Make bat display initial messages rather than discard them.
2031 kes First cut of adding .mod to the run command.
2032 kes Implement auto display of messages in bat.
2033 kes Enhanced preferences to allow all Bacula output to be
2036 kes Try to make bsmtp date routines more generic.
2037 kes Fixed bug #856 autochanger documentation.
2038 kes Rework bsmtp date editing for Win32. This fixes bug #854.
2039 kes Add new cats entry point so Win32 builds.
2041 kes Attempt to fix bsmtp date editing on OSes without %z editing.
2043 kes Do better checking for the MySQL 64 bit libraries looking for both
2044 .a and .so libraries.
2045 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
2046 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
2047 kes Require the thread safe version of MySQL during configure. Thanks
2048 to Andre Noll for pointing this out.
2049 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
2050 continuing in migration code.
2051 kes Apply implementation of tray-monitor font derived from gnome-console
2052 submitted by Andreas Piesk <a.piesk@gmx.net>
2054 kes Eliminate important memory loss in SQLite
2055 kes Fixed the batch insert MySQL thread specific data that was not
2056 being freed. See cats/mysql.c:db_thread_cleanup().
2057 kes Fix restore before command.
2058 kes Convert old hdr.name to name() in a few places.
2059 kes Implement update jobid command.
2060 kes Return all time_t dates in db_get_job_record()
2061 kes Stop watchdog in SD earlier.
2062 kes Put Pool just after Storage in please mount message.
2063 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
2066 kes Update the po files.
2067 kes Fix Verify InitCatalog by making it cache attributes.
2069 kes Change name bacula-bat to bat for man 1 page to correspond to
2071 kes Check for client and store NULL pointers in status command. This
2073 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
2074 kes Fix sign extended editing of %p.
2075 kes Clean out a little old #ifdefing in cats/mysql.c
2077 kes If time diff between DIR and FD is more than 600 seconds convert
2078 INFO message to WARNING.
2079 kes Implement heap size display in status for all daemons.
2080 kes Attempt to fix MySQL db open memory loss (not successfull).
2081 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
2082 kes Eliminate memory loss in MySQL (possibly other SQLs) during
2083 Query. This looks like a MySQL but but by doing extra releases,
2084 the memory goes away. This should fix bug #847.
2086 kes When backup fails, cancel SD before waiting for sd termination.
2087 kes If SD is waiting for FD to connect during cancel, wake up the
2089 kes Fix fsf code so that errno is correctly reported.
2090 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
2092 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
2093 so that Bacula doesn't later stumble into a seg fault.
2094 kes Use the term Restore Client in the restore Job report.
2095 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
2096 the original job's FileSetId.
2097 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
2098 spooling in migration jobs. Not yet tested.
2099 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
2100 reading conf file from a pipe. However, do it with open_bpipe()
2101 rather than popen. Not yet tested.
2103 kes Fix an ugly bug where the VolCatBytes were getting updated
2105 kes Implement bconsole memory command that prints current memory
2106 usage, plus smartalloc dump.
2107 kes Clarify some error messages in backup, admin, and migrate.
2108 kes Shrink label dialog to smaller size.
2109 kes Invert Cancel OK buttons on restore to be OK Cancel.
2110 kes More strerror() to bstrerror() conversions.
2112 kes Start implementing bstrerror() in place of strerror().
2113 kes Stripping path -- seems to work.
2115 kes Prevent door and port files from being restored (mostly
2117 kes Free an unreleased buffer in compat code.
2118 kes Change console Job name from *Console* to -Console- to eliminate
2119 Win32 filename problems. Put Win32 path separator when creating
2120 Console file. This fixes bug #846.
2121 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
2123 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
2125 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
2126 to force Win32 error message.
2128 kes First cut strip path. The data should be passed to the FD,
2129 but nothing is done with it yet.
2130 kes Enhance the digest and signature routines in the crypto
2131 library to accept a JCR and to use it to print error messages
2132 so that they will go in the Job report rather than the daemon's
2134 kes Simplify some of the verify signature code.
2135 kes Simplify a few of the alternative returns in the signature
2138 ebl Use only POSIX regex instead of GNU regex in breg.c for
2139 File relocation. It fix broken freebsd compilation.
2140 kes Convert all other Dir files to use new ua class message
2142 kes Tentative fix for missing digest signature in bug 807.
2143 kes Correct handle problem in new win32_ftruncate routine.
2144 kes Convert ua_purge.c and ua_update.c to use new ua class
2145 message routines for bat.
2147 kes Correct incorrect installation of LICENSE in Win32 installer.
2148 kes Display LICENSE at the beginning of the Win32 install.
2149 kes Attempt to correct the need for the png files to be installed
2151 kes Reapply my bat.conf install script in qt-console. I think I
2152 editted bat.pro instead of bat.pro.in and it was lost.
2153 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
2154 the /var/lock/subsys for subsysdir. Also corrects typos in the
2157 kes First cut update job.
2158 kes Correct configure to include qmake of src/qt-console directory.
2160 kes Make restore job yes/mod/no print in one command so GUI works.
2161 kes First cut implementing backup and restore client.
2162 kes Correct editing in Verify output that caused a seg fault.
2164 kes Insure that bat.conf is not overwritten during installation.
2165 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
2166 while I was implementing migration in March 2006 !
2168 ebl Cleanup file relocation, using char *RegexWhere instead of
2169 char *where + bool where_use_regexp
2170 kes Update some manpages and add bat manpage.
2171 kes Make a first cut at converting bacula.spec.in for bwx-console
2173 kes Apply patch from John Goerzen to add hostname as fourth argument
2174 to make_catalog_backup script.
2175 kes Fix typos I introduced into bsmtp.c
2176 kes Make pm_strxxx() routines handle input of NULL pointer. This
2177 is to protect from NULL pointers returned from SQL databases.
2178 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
2179 kes Add more debug to FIFO code -- fix fifo regression test.
2181 kes Implement posix_fadvise in FD, and for reading spool files in SD.
2182 kes Add thread timer to bnet_connect() to break from OS if wait time
2185 kes Update Win32 build to include new files, new symbols, and
2187 kes Implement socket level heartbeat (tcp_keepidle)
2188 ebl Commit File relocation patch
2189 kes Make bat have 'make install' target.
2190 kes Warn during install if old gnome-console binary found.
2191 kes Warn during install if old wx-console binary found.
2192 kes Add -8 option to bsmtp command line to add content type utf-8.
2193 Fixes bug #809. (Character coding problem in bsmtp).
2194 kes If < is found in target (from, to, cc) then do not enclose the
2195 target in < > in bsmtp. Fixes bug #772 (malformed address).
2196 kes When printing certain items in dbcheck, stop after 300000.
2197 Fixes bug #822. (dbcheck loops).
2198 kes Incorrect status in Dir after waiting for mount with poll set.
2201 kes Extend idea of Prefer Mounted Volumes to mean a volume about
2203 kes Print waiting to reserve a device every 5 mins.
2205 kes Don't call close_part in label.c if tape and relabel.
2206 kes Don't free volume if busy in close() -- should help with
2208 ebl Fix #824 RunScript bug (After script could be execute twice)
2209 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
2210 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
2211 Add a regression script to test RunScript
2213 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
2216 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
2217 deprecated. No additional bugs will be fixed, and they will be dropped
2218 in a future release (probably 2.4.0).
2219 kes Change name of wx-console to bwx-console to make it more Bacula
2221 kes Change the name of gnome-console to bgnome-console to make it
2224 kes Some time in March, a Feature Request with patch from Jorj Bauer
2225 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
2227 The ability for the director to validate a Client (FD) CN against
2228 an arbitrary set of patterns rather than the hostname, with
2229 A new 'TLS Allowed CN' set of directives which are implemented
2230 in the Client resource. Then pattern matching is used in place
2231 of hostname matching against the Certificate's CN. As an example, we
2232 have certificates which (a) use a local CA, and (b) have a CN of the
2234 kes Add new/changed entry points to Win32 build
2235 kes Create unaccepted-projects for projects that are not accepted.
2236 kes Simplify locking in the reservations system.
2237 kes Add more debug code in reservations.
2238 kes Make sure error condition on reserving a volume is handled correctly.
2239 kes Correct handling of volume_in_use.
2240 kes Correct handling of initializing a device.
2241 kes Move handling of broadcasting releasing a device into release_device().
2242 kes Correct attaching dcr to dev so that it is only done if device
2243 is properly initiated.
2245 kes Locking debug level tweaks in SD.
2246 kes Tweak new Volume code.
2248 kes Add exec external-command [wait-seconds] to bconsole. This
2249 executes the external-command. Note! normally external-command
2250 should be enclosed in double quotes.
2251 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
2252 it should normally be off in a production system.
2254 kes Implement die command for SD so that we can force it to dump.
2255 kes Implement SD lock debug code.
2256 kes Implement new algorithm for keeping Volume list in SD. It
2257 is now owned by the device.
2259 kes Implement new code for freeing in use volumes that should
2260 resolve if not all, some of the problems of multiple drive
2261 tape conflicts described in bug 801.
2263 kes Fix gui/bacula-web/images files in svn.
2264 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
2266 ebl Fix a bug in batch mode (in string escape)
2267 kes Correct migration prune SQL typo that crept in in a
2268 recent 2.1.x change.
2270 kes Move bnet_despool() into class in bsock.c
2271 kes Modify job report to include director name and Build OS.
2272 kes Move drop root privilege and check_catalog() before fork.
2273 kes Add update database scripts (version 9 to 10) to updatedb directory.
2275 ebl Check size and age of each file after its backup to see if
2276 it has changed during backup, if 'checkfilechanges' is set.
2277 The FD will do an extra check (stat(2)) after
2278 each file backup. mtime, ctime and size are compared with
2279 'before backup' information. If time or size mismatch, an
2280 error message will be generated. You must upgrade FD to use it.
2282 kes Make database name and user configurable
2283 --with-db-name=xxx --with-db-user=xxx
2284 kes Add back database type to message.c for debugging.
2286 kes Implement dir_sql() which issues an SQL query.
2287 kes Modify bat medialist to use dir_sql() and do some minor C++
2288 formatting as well as eliminating a number of pointers, simplifing
2291 kes Fix some of the mtx-changer grep commands for tape label readers.
2292 kes Convert a number of bsendmsg into the appropriate send/warning/error
2293 message class calls.
2294 kes Suppress the using database message in the .sql command.
2295 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
2297 kes Add context menu for floating a window.
2298 kes Some minor cleanup and name changes in qt-console
2299 kes Add doing mt setblk 0 in Win32 mtx-changer.
2300 kes Apply Martin's bug fix to move definition of ENODATA for
2302 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
2303 sqlite2 and sqlite3.
2305 kes More pruning cleanup.
2306 kes Turn on wait_for_drive by default in mtx-changer.
2307 kes Turn on Batch insert code by default as it now passes regression.
2308 kes Add ./configure --enable-bat to enable building of Bat.
2309 No install yet though.
2311 kes Implement a new .sql command for bat.
2312 kes Implement code to turn off pruning in obtaining the next volume.
2313 Pruning is turned off for the status dir command, but turned on
2314 for SD requests and for the list nextvolume command.
2316 kes Correct Qmsg() that was not updated correctly when committing a
2317 previous change (probably the recent TLS patch).
2319 kes Write new subroutine is_volume_purged() that explicitly checks
2320 if the Volume is purged, and if so marks it as such. This should
2321 resolve problems reported about needing to mount twice to recycle
2323 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2324 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2325 amount of duplicated code.
2326 kes Do volume pruning only for the Media Type desired (reduces pruning time
2327 if multiple Media Types are in the same pool).
2328 kes Implement more detailed info in the Job report for the Bacula version
2330 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2332 ebl Add bbatch tool to bench database and insert mode.
2333 Fix sql quote stuff in batch mode
2334 Fix sql stuff for mysql
2336 kes Correct problems with am/pm scheduling. Fixes bug #808.
2337 kes Implement new prunning code that prunes up to 1000 jobs at
2338 the same time. The same technique can be applied to a number
2339 of other prune/purge subroutines.
2340 kes Add an insanity check when starting a new tape job to ensure
2341 that the tape position has not been changed. If so fail the
2343 kes Fix Win32 build for dlls to add the folllowing:
2344 src/lib/bsock.c -- new file with new entry points
2345 src/lib/dlist.c -- new entry points
2346 src/cats/sql_create.c -- new entry point
2347 src/cats/sql_cmds.c -- new DATA item exported
2349 ebl batch mode cleanup bscan-test is ok now.
2350 kes Implement SD code to check length of disk volume before appending.
2352 kes Correct return status on db_batch... routines.
2353 kes Add call to db_write_batch_file_records() to migration code.
2354 ebl Fix AfterJob timing
2355 kes Move the checking of the database in initializion of the Director
2356 to after we drop privileges. This avoids the need for both root
2357 and bacula access to the DB.
2358 kes Correct a misplaced variable definition in src/filed/backup.c
2359 kes Correct how the new batch insert db_create_attributes_record()
2360 uses the arguments. Caused a seg fault in bscan.
2361 kes Implement lock() and unlock() methods in DEVICE class.
2362 Implement block() and set_block(xx) methods in DEVICE class.
2363 kes Modify bnet_connect() so that it uses time() to check for the
2364 wait time expiring (on some OSes, some system calls may not
2365 return immediately).
2366 kes Modify Verify to obtain the previous JobId when it is actually
2367 running rather than at schedule time (as it was in 1.38.x).
2368 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2370 kes When checking pid in pid file, continue running if the pid is
2371 the same as ours. This occurs on IRIX after a system crash.
2374 kes Extend new GUI API.
2375 kes Make the ua structure a class, and implement send_msg(),
2376 error_msg(), warning_msg(), and info_msg().
2378 kes Apply fix from for building wx-console on the Mac from
2380 kes Implement new select mechanism for GUI programs.
2381 kes Reorganize initialization of stackedWidgets in bat.
2383 kes Add updated nagios plugin supplied by Christian Masopust.
2385 kes More bat implementation.
2386 kes File migrate bug with Pool Occupancy using mediaid instead
2387 of jobids. Fixes bug #795.
2388 kes Fix orphaned buffers in filed backup and verify due to
2389 crypto buffers not freed during errors. Fixes bug #789.
2390 kes Extend new GUI api code to tree commands.
2391 kes Ensure that tree and dot commands check console ACLs.
2392 kes Permit marking directory with trailing slash.
2393 kes Allow 20 console connections (instead of only 10).
2395 kes Add smartctl call to bacula-sd.conf as an example of getting
2398 kes Modify jobq.c to let simultaneous restore jobs run. This may
2399 cause them to fail if they cannot get a drive.
2400 kes Add Client Connect Wait to Storage daemon to permit users to
2401 modify the time the SD waits for a FD connection.
2403 kes Correct virtual changer check which was backwards. This caused
2404 volumes to be unloaded into slots already occupied.
2406 kes Apply Command ACL filter to JobId list in restore command.
2407 kes Correct typeo in var.c patch.
2409 kes Don't let Bacula prune File or Job records for the current Job.
2410 kes Fix variable substitution pad + inc bug reported (with patch)
2413 kes Correct SQLite log table index as reported by Luca Berra.
2415 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2417 kes Begin implementing new comm signals for API.
2418 kes Fix a few places in lib/message.c where the open fd may
2420 kes Continue implementing lib/bsock.c (real class). Make jcr,
2421 who, host, and port private. There are new methods to access
2422 them for non-class use. This required touching a number of files.
2424 kes Add LANG=C to autoconf/randpass so it works with languages other
2425 than English. Fixes bug #788.
2427 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2429 You will not be able to generate Include/Exclude list any more.
2430 It will be fixed soon.
2431 If you want to use this, you can apply
2432 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2434 kes Restore of sockets created false error messages because Bacula
2435 no longer restores sockets, but the code was still trying to
2436 set the attributes on a non-existent file. Reported by a user.
2437 ebl finish RecyclePool feature
2438 Media will takes Pool.RecyclePool
2439 when moving from Scratch to a Pool or when user will do
2440 update volume=xxx frompool
2441 To use it, add RecyclePool = aPool to your Pool resource
2444 RecyclePool = Scratch
2448 kes Expand new BSOCK class adding signal() and new BNET signals.
2449 kes Begin enhancing the dot commands adding a new API function
2450 that returns more information and will make it easier
2451 to interface to the Director from a program.
2453 kes Make DEVICE fd private. Its new name is m_fd, and can be
2454 obtained with dev->fd() outside the class. This is the
2455 first of many DEVICE members to be made private.
2456 kes Implement Michael Renner's idea on having a virtual disk
2457 changer. I made some minor modifications (e.g. I did not
2458 implement the Virtual Changer directive, but simply set
2459 the Changer Command to an empty string.
2461 kes Implement a BSOCK send() method that writes the whole record
2462 in a single write() request rather than in two.
2463 ebl add update volume=xxx recyclepool=yyyy
2464 volume takes recyclepool from pool when using update volume=xxx from pool
2466 kes Fix encryption deblocking bug, which caused some restored files
2467 to be truncated. This fixes bug #763.
2468 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2469 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2471 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2472 ebl Use btime_t instead of uint64_t in media patch.
2474 kes Optimize the use of the database a bit in the Status dir command.
2475 Only open it when needed, ensure that if any previous database
2476 was opened, it is closed.
2478 kes Correct VolCatBytes bug from media patch.
2479 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2480 in the case of orphaned records.
2481 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2482 and File records in 300K chunks to be more efficient. This
2483 idea came from Juan Luis Frances (if I remember right).
2484 kes Apply Eric's scratch patch that moves a purged Volume to
2485 the RecyclePool. Question: how is RecyclePool set? what
2486 happens to the ScratchPool?
2487 kes Apply Eric's media patch that collects read/write media
2488 times as well as byte counts. This patch requires a
2489 simultaneous upgrade of the DIR and SD. Note, there
2490 should be some way to turn off timing. I'm not sure
2491 times are in Bacula units.
2492 kes Apply Eric's batch-insert patch.
2494 kes Update projects list.
2496 kes Implement Include/Exclude file lists in FD as dlists using
2497 the new dlistString class. This permits efficiently having
2498 large include/exclude lists and completes project Item 25.
2499 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2500 console is authorized to cancel the job. This fixes bug
2502 kes Modify SD so that the VolCatJobs medium record is updated
2503 at the beginning of a Job rather than the end. This
2504 fixes bug #775 where exceeding MaxVolJobs caused jobs
2506 kes Added a mutex around getting and setting Volume information
2507 so that multiple simultaneous jobs will single thread.
2509 Switch to using Subversion
2510 kes Remove src/pygtk-console/ from configure
2512 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2513 plus the entrypoints.
2514 kes Apply patch supplied that corrects debug print
2515 in canceling jobs for max run time. Supplied as
2516 part of bug #621, which was previously fixed.
2518 kes Test on job_canceled() and sd_msg_thread_done inside
2519 loop starting the message thread to avoid a race condition.
2521 kes Remove rl_catch_signal from console.c as it conflicted
2522 with the header definition. Fixes bug #765.
2523 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2525 kes Clarify some stored/acquire messages to indicate if the
2526 problem is with read or append.
2528 kes Fix memory leak with storage ids in cats/sql_get.c
2529 kes Terminate watchdog earlier to avoid reference to released
2530 memory -- reported by Jason Austin.
2531 kes Move closing the database from jobq.c to the director daemon
2532 termination routine. This fixes memory leaks for shadow jobs
2533 (i.e. migration jobs).
2534 kes Free up the unique jobid chain items in migrate.c. This fixes
2535 a memory leak problem.
2536 kes Convert some ugly looking for statements to use foreach_alist
2537 in findlib/find.c. This will facilitate converting the structures
2538 to use dlist (for large include/exclude lists).
2539 kes Fix a bug in the btree.c and btree.h routines, then rename them
2540 rblist and add them to be built in src/lib. Include some new
2541 methods written by Rudolf Cejka that make the code more readable
2542 (hides some of the ugly casting).
2543 kes Add set_next() and set_prev() methods which make the code much more
2544 readable. Also add a new dlistString class that facilitates storing
2545 strings in dlists. To be used in the large include/exclude lists.
2546 kes Make some trivial modifications to lib/tree.h that use rblist
2547 rather than dlist for storing the tree links. This was suggested
2548 by Rudolf Cejka. The result of this is that the restore tree now
2549 uses red-black binary trees rather than simple linked lists. This
2550 should give rather dramatic speed improvements for directories
2551 contining large numbers of directories/files (more than 10000).
2553 kes Fix maxruntime bug #621.
2555 ebl Implement the include JobID in spool file name project.
2556 kes Reorder projects file in order determined by Jan 2007 vote.
2557 kes Implement item #12 on project list -- quick release of FD by
2559 kes Fix open of SQLite3 db where user does not have write permission
2560 so that DIR does not crash. Fixes bug #761.
2562 kes Add back missing @ in Win32 Makefile.
2563 kes Change 'Device not configured to autolabel' from INFO
2565 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2566 which should restart an indefinite # of times.
2567 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2568 other DIR specifications.
2570 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2571 Fix path quoting in SQLite scripts.
2572 Fix problems with SHGetFolderPath.
2574 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2576 kes Fix Job restart on error bug that promotes an Inc to a Full
2577 backup. This should fix bug #755.
2578 kes Add qt-console and first cut of code.
2582 kes Fix Bacula->Documentation link on Win32 to point to index.html
2583 instead of bacula.html. Fixed bug #750.
2584 kes Return JobId in db_get_job_record() when JobId==0. This should
2586 kes Do not release source pointers when restarting a failed job.
2588 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2589 This *should* fix bug #747.
2590 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2593 kes Modify USTORE constructor to set an empty store_source string,
2594 and don't copy the store_source string in a cancel. Hopefully
2595 this will fix Arno's seg fault, bug #744.
2596 kes Add back code to disable conio in configure. Fixes bug #743.
2597 kes Correct the Options scanner in the FD to correctly handle
2598 SHA1 option, which was eating the next option. Reported by
2600 kes Add code to indicate when the SD is spooling, spool wait, and
2601 despooling as requested by Alan Brown.
2603 Version 2.0.0 released: 4 January 2007