1 Technical notes on version 2.5
5 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
6 examples/database/dbcheck.sql
7 enhancement to wait command: wait mount ...
9 filepattern (restore with regex in bsr)
14 ebl Fix #1175 About update slots that don't reset InChanger flag when
16 ebl Fix #1173 where prune_volume() returns a volume from the scratch.
18 kes Remove jobq.c constraint that read and write SD must be
19 different. This may lead to more deadlocks in the SD,
20 but they should be resolved there.
21 kes Ensure that job report is always printed even if job is failed
23 kes Don't print job report twice for failed VBackup jobs.
25 kes Fix editing of retention time difference to use 64 bit
26 int instead of 64 bit unsigned. This should permit very
27 long retention periods.
28 kes Implement code to prohibit a write job from appending to a
29 Volume that will be used for a read operation. This is
30 new code and could possibly cause some conflicts.
32 kes Integrate James Harper's Exchange Win32 plugin patch.
33 kes Apply patch from Marco van Wieringen that implements the new
34 Solaris libsec interface for ACLs so that Bacula can save and
35 restore both the new ACLs and old ACLs.
36 kes Marco's patch also corrects the file dependency generation code
37 so that it works properly both with shared libraries and static
39 kes Marco's patch also includes a small cleanup of the cats Makefile
40 to remove some references to non-existent files.
42 kes Modify win32 Makefiles to use full paths in most cases.
43 In particular add MAINDIR environment variable that points
44 to the main Bacula source directory.
46 kes Add read volume list code to SD -- not yet used.
47 kes Add James' binutils patch
48 kes Split volume management code out of src/stored/reserve.c into
50 kes Modify configure to do an automatic make clean. This ensures
51 that any changes to ./configure options are handled correctly.
53 Beta version 2.5.16 release:
55 ebl Rename JobStat table to JobHistory
56 kes Ensure that only normally terminated jobs are migrated.
58 kes Add Makefile dependency when using LIBTOOL_LINK so that any
59 change in ./configure options will be accounted for.
61 kes Fix typo in the ACL patch that I overlooked.
62 kes Apply Marco's libtool include patch.
64 kes Apply Bastian Friedrich's ACL patch to eliminate ACL
65 errors during restore.
66 kes Minor cleanup of create_restore_volume_list() code.
67 kes Fix typo in console Makefile.in
69 ebl Fix #1110 about RunScript that can't execute a script with
70 Unicode caracters in the path.
72 kes Apply tray-monitor patch from Bastian Friedrich to make it
75 kes Apply cleanup patch from Marco
76 kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
77 that implements libtool to create shared objects out of
79 kes Fix tray-monitor so it will speak to new FD.
80 ebl Fix bug with ansi label when volume name length < 6
81 ebl Fix segfault in debug level > 50 with btape.
82 ebl Remove warning message in btape when command is empty.
83 kes Fix Win32 build to pull in new BACULA define.
85 kes Change IncludeDir to Exclude Dir Containing.
86 kes Implement code to prohibit ExcludeDirContaining in an
87 Exclude section (same for Plugin and Options). A bit
88 of a kludge with RES_ITEM2 ...
89 ebl Add field to command list to restrict Runscript console
91 ebl Use a separate JCR when running Console command with Runscript.
92 ebl Permit to mark version as Beta in some ouputs
94 kes Add plugin types in jcr.h to reduce need to cast.
95 kes Do better checking of plugin return values.
96 kes Free plugin context after calling pluginFree() as
98 kes Allow plugin to call JobMessage with NULL context.
99 kes Do not add plugin to global list if loadPlugin returns error.
100 kes Rework plugin.h a bit to reduce dependence on Bacula.
102 kes Move generation of bsr file for Virtual Backup to run section
103 so that it is generated just before actually running.
104 Suggested by Graham Keeling.
106 kes Add malloc and free Bacula entry points for plugins. Increment
107 FD plugin interface version. Create a bacula plugin context
108 structure to keep track of whether or not the plugin is disabled.
109 kes Apply FileIndex fix for plugin name stream suggested by James.
110 kes List plugins in FD status report when debug > 0.
112 ebl Add a new VerId variable that is printed in version command.
113 kes Fix migration SQL not to migrate a job that has not terminated.
114 This is a partial fix to bug #1164.
115 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
116 backup start time bug reported by Graham Keeling.
118 ebl Fix possible bug in cancel_job() with job that are not
121 kes Fix bat build for Win32.
123 kes Copy plugin link field into ffpkt.
125 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
126 It provides FileRegex in bsr files and code to collect regex
127 from the user during restore, an Allow Mixed Priorities feature,
128 and documentation for the above.
129 ebl Remove db berkeley from configure process
130 kes Do dirty check on hostname (Linux only) and if not resolvable
131 use localhost as default.
132 kes Increase vtape max block to 20GB.
134 kes Refactor restore code to create a close_previous_stream(). This
135 This may destabilize the source.
136 kes Implement planned startRestoreFile() plugin call.
137 ebl Remove missing Loaded information from status slots storage command.
138 ebl Fix Console command problem that cancels the job
139 kes Add more plugin restore debug code.
141 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
142 kes Rewrite plugin restore interface a bit to correspond to how Bacula
143 creates and writes to the restored file.
144 kes Add some DebugMessage() calls to the bpipe-fd.c program.
146 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
147 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
148 Bat; allow add and delete in place of mark and unmark.
149 kes Another attempt to fix the endRestoreFile plugin bug noted below.
151 kes Apply dbi driver patch from Joao.
152 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
153 Bastien Friedrich reported the bug.
154 kes Create plugin instance only when FD job starts.
155 kes Add new FD plugin event: bEventCancelCommand when
156 a cancel command is issued to the FD.
158 kes Add cmd_plugin flag to jcr so we can globally know if a
159 command plugin is running.
160 kes If command plugin running, do not attempt (for the moment)
161 to get Win32 extended attributes.
162 kes Ensure that proper Win32 flags are set in bfile packet
163 if plugin_bopen() works on Win32.
164 kes Remove generated src/plugins/fd/Makefile
166 kes Implement build and install of bpipe-fd.so plugin.
167 kes Rework the interface that passes packets to the plugin
168 so that the packet is started and ended by the packet size.
169 This allows the driver to do a sanity check.
171 kes Rework the pluginIO Bacula internal code to enable
172 proper handling of Win32 error codes from GetLastError.
173 kes Apply Joao's patch to regress startover_libdbi.
175 ebl Add -B option to dbcheck to get catalog information
176 kes Fix Win32 build to include new library function.
177 kes Remove some old reader/writer code.
178 kes Implement ./configure --with-plugindir=xxx
179 ebl Fix the mysql bug in the new accurate code
180 kes Improve plugin debug. Create plugin test.
181 kes Set main thread specific data to INVALID because it
182 has no jcr. This allows debug output to work correctly.
183 kes Add src/plugins/fd/Makefile to ./configure process.
184 kes Make first cut attempt to correct SQL that computes the current
185 Pool usage. This is to fix bug #1159.
186 kes Do a bunch of plugin cleanups for Win32 and more careful checking
187 of PluginDirectory and whether or not a plugin was found.
189 kes This code should fix the race condition that leads to a Director
190 crash at job end time when the job list is updated. This was reported
192 kes Add more plugin documentation and fix include of config.h for
193 Win32 build (I hope).
195 ebl Revert to htable instead of rblist
196 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
197 tree instead of htable.
198 ebl Use a dedicate DB link to compute and send the accurate list
201 kes Fix compile errors in filed/fd_plugin.c.
203 kes Remove all double quotes from SQLite creating script and
204 replace by single quotes as suggested by John Huttley.
206 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
207 It significantly improves the performance of dbcheck for
209 kes Fix bad debug code call in src/filed/accurate.c
211 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
212 output. Perhaps we really need to implement M_SAVED.
214 kes Fix bug #1156 FD crash during processing of Accurate data.
215 kes Tweaks to htable code to improved debugging and make names
216 a bit more meaningful.
218 ebl Remove time_t from update_stats()
220 kes Modify the license of the example plugin program to allow
221 it to be used by anyone for making a Bacula plugin.
222 kes Make apply_rp_codes() in bpipe-fd.c be static.
224 kes Remove Encryption and Accurate lines in vbackup output -- not used.
225 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
226 kes Add host name to items printed during dump.
227 kes Make Check File Changes default on.
229 kes Set the default FD timeout to 3 minutes (previously 30).
230 kes Apply Bastian Friedrich's weird spelling correction patch.
232 kes Always print Verify hash differences. Rename variable to make the
233 code slightly more readable.
235 kes Correct tests for MaxFullInterval as reported by
236 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
237 kes Fix MaxDiffInterval code as well.
238 kes Enable Win32 plugin load code in lib.
239 kes Make Verify code that computes disk checksums use the same
240 algorithm as backup when dealing with sparse files.
241 kes Attempt to run VSS on any systems newer than Vista -- should
242 make it work on Windows Server 2008.
243 ebl Change the new statistic implementation. Remove the UseStatistic
244 directive and add a 'update stats [days=...]' command. You can
245 now decide when copy job records from Job table to JobStat.
246 Statistics are much more accurate with this.
248 kes Fix SQL case problem that may cause the failure of DiskToCatalog
250 kes First cut adding SD plugins.
252 kes Add Slot if it is non-zero to writing bsr file after a
254 kes Change a number of bnet_fsend() into class method calls.
255 kes Begin audit of diff of 2.4 branch to trunk code.
257 ebl Fix the mysql creation script that double-created an
258 index of the same field on the Media table.
259 Add an index to on VolumeName to the Media table for mysql.
261 kes Another try at fixing Vbackup. It looks much better this time.
262 Disable file index sanity check in FD with value stored in
263 attributes record because with Vbackup the File Index gets
264 changed, but not the attributes record.
265 Enhance some debug code.
266 Fix handling of re-indexing records that are copied in Vbackup.
268 kes Made level_to_str() know about Virtual backup.
269 kes Set correct Virtual backup write pool.
270 kes Fix compile warning in new dbcheck port code.
271 kes Fix migration code broken by previous virtual backup fix.
273 kes Fix problem of Virtual backup not writing a sequential FileIndex.
274 kes Reset Virtual backup time/date to the value from the last backup.
275 kes Ensure that storage name is passed to SD on read.
276 kes Correct a problem with Level and Virtual backup, rework how
277 bsrs are printed in debug to use standard routine.
278 kes Apply patch from Chris in bug #1133 that provides alternate db port
280 ebl Remove catalog dependency from bcopy tool.
281 ebl Modify catalog scripts to have an easier packaging integration,
282 using default variables.
283 Make difference between SQLite3 and SQLite in db_get_type()
285 kes Apply most of changes in a patch from:
286 Michael Stapelberg <michael+bacula@stapelberg.de>
287 that allow the Bacula FD to compile on IRIX 6.5.
289 kes Apply patch from Bastian Friedrich that accepts a yes on a
290 delete volume command line.
291 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
292 job when reading from one autochanger and writing to another.
293 kes Minor tweaks (copyright dates convert to use method instead of bnet).
295 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
296 drives when no tape is mounted.
298 kes Add additional info to some SD messages.
299 kes Add fix supplied by Martin Simmons for turning off EOL character
300 in new console multi-command code.
302 kes Fix a Verify InitCatalog problem where in certain cases
303 a garbage filename may be entered in the verification database. This
306 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
307 sent in by Riyas Yoosuf.
309 kes Fix seg fault in Dir during estimate command with no level value
310 given. This fixes bug #1140.
312 kes Add message to migration job when the target job is already migrated.
313 This closes bug #1129.
316 kes Raise some restore debug levels.
317 kes Replace off_t by boffset_t where ever I found it.
319 kes Define a machine dependent ioctl request type for use with
322 kes When a migration job actually runs, re-check the Job record
323 and skip if the job is already migrated. This should
324 significantly reduce the problems with bug #1129.
326 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
327 turn off glibc checks that prevent getting good dumps.
328 kes Implement console 'wait mount' command. Doesn't yet work.
329 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
330 kes Break the do_swapping into do_unload, do_swapping, and
331 do_load. It is much more logical that way.
332 kes Implement a set_dcr_from_vol subroutine in acquire.c for
333 reading volumes. This allows the dcr to be refreshed after being
334 zapped when the wrong volume is mounted.
335 This should fix bug #1126 -- During multiple tape restore, bacula
336 does not ask for physical tape change, but rereads same tape
338 kes Apply patch submitted for bug #1107 with a small modification.
339 This fixes a bug where bcopy copied too many records.
340 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
341 This fixes bug #1124.
342 kes Make the default bat restore Pool be Any. This fixes bug #1118.
344 kes Remove debug statement that crashes the SD at the end of
345 a tape during restore. Fixes bug #1125.
347 kes Implement Win32 bat changes made to Branch-2.4
349 kes Tweak separator command in console to start disabled and
350 allow defining no separator character. Also make code a
351 bit more fault tolerant.
352 kes Make btraceback write the traceback to the working directory
353 before attempting to mail it.
354 kes Add a RFC to Projects.
356 kes Attempt to implement a kludge to make Qt work with bat
358 kes Setup rstorage correctly. Virtual backups are working.
360 kes Move setting JobLevel and JobType into a method, which should
361 allow completing Virtual Backups.
362 kes Fix verify jobs to work again.
364 kes Virtual Backup tweaks -- it is close to working.
366 kes Ensure that SD tried to mount a volume not in an autochanger
367 at least once before asking for operator intervention.
368 kes Make SD aware of Virtual Backup jobs.
369 kes Add VirtualFull for bat.
370 kes Changes to get read storage correct for Virtual Backup.
372 kes Remove old code from label.c
373 kes Split display_display_info() out of write_bsr_file()
374 kes do_vbackup_init() working -- i.e. bootstrap file built.
375 kes Change Bacula trademark owner from John Walker to Kern Sibbald
376 kes First non-working cut of vbackup
377 kes Correct FD heartbeat code to use volatile variable accessed by
379 kes Zero thread id with memset if on Win32 in case it is a struct.
380 kes If cannot create JobMedia record, continue to try to write eof
381 and clean up in block.c
383 kes Add code to interface OpenSSL to new Win32 pthreads code which
384 used a structure for thread_t.
386 ebl tweak bat for win32 compilation
388 ebl Remove tokyo cabinet from the source
389 ebl Update configure/autoconf to support berkeley DB
390 ebl Add a sort to db_get_file_list() to improve bsr construction time.
392 kes Add a mtx-changer.conf file that is not overwritten during
393 an upgrade. It fully configures the mtx-changer script.
394 kes Clear in-use bit on vol when unused while swapping.
396 kes Remove sleep at end of ./bacula
397 kes Clear hash packet for hardlinked files correctly. This corrects
398 a long standing bug where hardlinked files selected individually
399 would occasionally not be restored.
401 kes Apply Eric's patch to ensure that autoprune does not return
402 a Volume not in the autochanger unless requested to do so.
403 kes Correct bat restore display of multiple drives. This fixes
405 kes Do find_a_volume() each time an unload is done. This
406 fixes the failure of maxvol2-test.
408 kes Add some SD debug code.
409 kes Do find_a_volume() each time an unload is done.
410 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
411 and adds --with-db-port to ./configure.
412 kes Use Qmsg() in job.c watchdog callback.
414 kes Release main control rwlock if ABORTing.
415 kes Make watchdog connect timeout queue messages rather than sending
416 directly to avoid lock conflicts with the real thread.
417 kes Add const char in dbd.c to avoid compiler warnings.
418 kes Fix python compiler string warning. Note, IMO the GNU C++
419 compiler guys have made a *very* bad change to their compiler.
420 They now force all strings to be 'const' unless you explicitly
421 cast them, which is extremely ugly and ruins nice code as well
422 as creates a lot of useless work.
424 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
425 mt. This fixes bug #1116.
426 kes Add const in python files to reduce compiler warnings.
427 This may have to be backed out because of later compiler
429 kes Fix failure of 2drive-concurrent-test. Always read label;
430 clear_unload() only after drive is defined in acquire_for_read().
432 kes Generally clean up the manual tape loading code. The main
433 conceptual change is that when a volume is marked to be unloaded,
434 its volume name is retained, and it is only marked as unloaded
435 when either the autoloader says it is unloaded or another tape
436 is read on that drive.
438 kes Add debug code and refactor subroutine in stored/mount.c
439 kes Fix format problem in bscan output reported in bug #1105.
440 ebl Fix get_next_volume_for_append logic with autochanger
441 - use pruned volumes if found
442 - don't reset the inchanger flag after getting a recycled volume
444 Fix recycle_oldest_purged_volume to take InChanger flag in account
446 ebl Add mmap/unmmap implementation for tokyodbm under win32
448 kes Make first step toward eliminating globals from config
449 scanning. Also should be a workaround for FORTIFY_SOURCE
450 GNU C bug -- fixes bug #1042.
452 kes Apply duplicate job tests to restarted jobs.
453 kes Copy more data when restarting a job so that run
454 overrides are kept. This should fix bug #1094.
456 kes More word alignment cleanup.
457 kes Fix bug where SD did not ask operator if the device could not
458 be opened. Reported by Eric.
460 kes Add dbuser to DIR conf file (replaces user).
461 kes Add --with-db-password to ./configure
462 kes Fix regress to handle db_password.
463 ebl Add new 'status storage slots' that list autochanger
465 ebl Update vtape driver to compile only under Linux.
466 ebl Fix a bug when restoring with a wrong mediatype.
468 kes Eliminate ints from conf files and structures to avoid
469 word alignment problems
471 kes Fix bug reported by Scott Barninger where the bacula script
472 refers to scripts in the wrong directory. Needed to meet the
473 requirements of recent FHS location changes.
474 ebl Disable vtape for FreeBSD.
476 ebl Modify disk-changer to check if slot contains something before
479 ebl Fix vtape on win32 and debian.
480 ebl Fix autoselect patch (cause segfault).
482 ebl Fix autoselect option broken for a while. Fix #1089. Need some
483 work with StorageId to be able to use a particular drive in a
486 ebl Rename vtape to vtape.
487 ebl Update vtape driver.
489 ebl Modify vtape driver to avoid sparse file.
490 kes Add make clean of qt-source directory during ./configure
491 kes Store last block number written to tape in DEVICE and
492 use it for testing for correct last block on EOT.
494 Release Version 2.4.0:
498 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
499 This fixes bug #1095.
501 kes Add create_postgresql_database.sql to Win32 installer. Should
502 fix problem reported by Juilio Monteiro.
503 kes Get correct slot when auto unloading a device. This fixes bug
506 kes Fix multiple media restore.
507 kes Make DEVICE Slot private and access it via a method.
508 Allows better control over when it is set and cleared.
509 kes Fix possible seg fault if SQL error.
511 kes Add Martin's fixes to argument scanning for the estimate
512 command. This fixes bug #1093.
513 kes Add debug code to SD.
514 kes Fix renaming a Volume, which used the wrong Volume name.
516 kes If operator has rewind tape, print warning, release tape and
517 try once more. If tape is positioned somewhere, something went
518 wrong, so mark the tape in error and try once more. Previously
519 this error was fatal, now it produces an error message.
520 kes Ensure correct volume name displayed during restore
521 kes Ensure that Volume is mounted for restore.
523 kes Fix a few more Coverity reported problems.
525 kes Apply Allan Black's status dir job count patch.
526 ebl Add information about IMPORT/EXPORT slots in mtx-script.
527 kes Enhance a couple of SD debug messages.
528 kes Tweak unload flag setting and ensure it is set during swap.
530 ebl Fix #1091 about bad output in estimate command.
532 kes Modify autochanger locking to attempt to avoid race
534 kes Make sure device not busy before doing label command.
535 kes Display open() errors except when polling. Previously too
536 many were suppressed. This should fix bug #1070.
537 kes Fix Win32 reparse points. Bacula will not recurse into any
538 reparse point directory, including mount points, unless the
539 directory is explicitly mentioned at the top level (same as
540 with Unix). A file that is linked to another file will be
541 backed up -- much as Unix does for hardlinked files.
542 This fixes bug #1041.
544 kes Remove double quotes from ChangeLog and ReleaseNotes
545 kes Remove StorageId test when pruning and recycling (Eric's changes).
546 kes Remove old form of locking when getting volumes -- causes deadlock.
547 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
548 the name unique and to eliminate compile time error.
549 kes Add accurate.o to Win32 FD Makefile
551 kes Fix cats dll build on Win32 after db_update_job_end_record
552 calling sequence change.
553 ebl Switch to tokyo dbm instead of htable in accurate code
554 ebl Include tokyo dbm to bacula source tree
556 kes Fix buffer overruns detected by Coverity.
558 kes Tweak joblog display.
560 kes Implement --without-qwt
561 kes Fix layout of restore tree dialog
562 kes Add configure bat QWT libraries, so that bat can be built
563 with or without the QWT libaries.
565 ebl Add dummy tape driver for regression tests.
566 kes Make sure we unload the right slot when swapping.
568 kes Add debug times, reduce size of two-pool-changer test
570 ebl Tweak autoconf scripts for vtape
572 kes Improve SD reserve debug code.
573 kes Testing an improvement to free up volumes no longer in use.
575 kes Rework SD acquire for read to handle autochanger Volume
577 kes Implement regression that explicitly tests swapping a Volume
578 from one drive to another.
579 kes Enhance disk-changer to detect most error conditions.
580 kes Fix SD code so that it properly swaps a Volume between drives.
581 This fixes bug #1083.
583 kes Apply libdbi patch from Joao Freitas for regress and for
584 Bacula trunk. Regress now works with libdbi. Nice.
585 kes Apply .nobackup patch from bug #1077 submitted by
587 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
588 name into jobs cloned via the run directive.
590 kes Prevent a Volume that is being swapped from being freed from
591 the volume list. This will most likely fix, at least partially,
593 kes Fix strippath so that it does not get a buffer overrun and crash FD.
594 This fixes bug #1078.
595 kes Remove 50 millisec wait in SD that broke debugger.
596 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
597 that a job may run, counted from when the job was scheduled.
598 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
599 a job may block waiting for a resource, counted from when the job starts
600 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
601 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
602 that implements multiple commands per line in the console when using
603 readline. Modify the default to use a semicolon as the command separator.
605 ebl Fix SQL query in migration code.
606 ebl Make accurate mode with hash disk pass regression tests
608 ebl Implement first cut of accurate backup with hash disk.
610 kes Force unload of volume when wrong volume mounted in SD.
612 kes Fix bat seg fault at termination.
613 kes Add Bacula generated version to bat about box.
616 kes Experiment with allowing multiple read jobs.
617 kes Move final volume swapping code to DCR method and
618 call it from acquire_for_read().
619 kes When wrong volume is mounted during read, unload_autochanger.
621 kes Integrate the libdbi changes from Joao Henrique Freitas
623 kes Stop searching for Volumes in SD askdir if DIR returns the
624 same volume name twice in a row.
625 kes Close bat console windows first to eliminate error message
628 kes Tweak the swap Volume from one drive to another code so that
629 it now seems to work.
630 kes Resolve several problems with recycling that broke the new
631 code (these problems are in 2.2.9 as well).
632 kes Remove the volume lock when calling the sysop code.
633 kes Don't mark a reserved volume with no writers as unused otherwise
636 kes Rework class structures for VOLRES, DCR, and DEVICE to make
637 the method names a bit more logical, and for more logically
638 handling the responsibilities.
640 kes Remove redundant code in terminating the scheduler that just
641 causes a seg fault in many cases.
642 kes Cleanup releasing a volume and make it a DCR method.
643 kes Improve algorithm for detecting pre-reserved volume and
646 kes Tweak volume swapping code so it works.
647 kes Correct name overloading in mount.c
648 kes Replace released flag in VOLRES with reserved and add access
649 methods for the VOLRES class.
650 kes Prevent volume from being released while being swapped.
651 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
652 plugin that add %w (where) and %r (replace flag) editing to
654 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
656 kes Refactor parts of stored/mount.c
658 ebl Add sanity checks for VolWriteTime and VolReadTime
659 ebl Take care of bad clock changes while computing VolWriteTime
660 and VolReadTime. This should fix or limit #1066
661 kes Correct error string numbers in dird/catreq.c
662 kes Restructure reserving, acquiring, and mounting volumes. Calls to
663 autochanger are deferred for mount.c -- simplifes the code.
665 kes Do not prune any running job. It just fails the job.
666 kes Lock the volumes when changing dev->reserved_device and marking
667 the volume unused otherwise the device can get reserved by
668 another job before the volume is released, thus blocking it.
670 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
671 kes Fix bug #1063, reuse of freed ptr in list nextvol.
672 kes Release regex compile buffer in filed/job.c
673 kes Add proper type of const char in sql_create.c
674 kes Turn off debug in daemon termination routines
675 kes Move free_volume_list() before devices are freed in stored.c
676 kes Fix reference to uninitalized stack variables in bregex.c.
677 This should correct bug #1067.
679 kes Fix possible seg fault in SD when freeing a volume entry.
681 kes Implement unload_dev() before swap device.
682 ebl Add statistics prunning with option and menu
683 kes Separate unload_dev() from unload_other_device() in autochanger.c
685 kes Apply patch from bug #1069 that corrects spurious error messages
686 when ACLs enabled on SGI but no ACL exists.
687 ebl Fix small segfault in bacula-sd when debug level is 500
688 kes Modify run_program() and run_program_full_output() to use
689 call by reference for the results string. This corrects a long
690 standing problem where the address of the string may be changed
691 in the subroutine but not in the calling program.
693 kes Re-enable code to remember last volume mounted on a non-tape
695 kes Add patch supplied in bug #1068 that fixes a SD crash when using
696 a Virtual autochanger.
697 kes Generate correct JobMedia records during spooling/despooling when
698 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
699 <tih@hamartun.priv.no> for excellent analysis and testing.
701 kes Tweak hash algorithm for htable using Martin Simmons idea
702 for doing a circular shift.
703 kes Remember what volume is in VTLs (previously turned off for
705 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
706 pointed out some problems in creating JobMedia records during
707 spooling with concurrent jobs. Fix the problem by updating the
708 start file position before despooling and generate a jobmedia
709 record at the end of despooling.
711 kes Fix handling of JobMedia records during spooling and when a
712 Volume is changed without actually writing data to the Volume.
714 kes Rework certain SD locking based on gdb tracebacks of deadlocks
715 sent by Eric. This code now uses only the volume_lock() rather
716 than the reservations lock when at EOM and acquiring a new
718 kes Ensure only one exit point in several subroutines.
720 kes Implement bsock code to permit locking. Use the new code in Verify
721 in the FD to prevent the heartbeat thread from disrupting the Verify
722 data sent to the Dir.
723 kes Modify SD locking to eliminate locking the reservations system from
724 outside the system. Use the volume lock when getting media data
725 and reserving a new volume at end of media.
726 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
727 when SD starts are not locked into place.
729 kes Fix error compiling runscript code on 64 bit machines.
730 kes Tweak Win32 mount point code.
731 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
732 cleared giving bad file estimate).
733 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
736 kes Keep Schedule run lists in order as suggested by
739 kes Implement autostart scripts for Debian.
740 ebl Implement upgrade catalog scripts.
742 ebl Apply jobstat patch for long term statistics. Have to implement
743 purge stats command and upgrade scripts.
744 kes Fix mtx-changer.in for broken Debian mt program.
746 kes Fix large number of JobMedia records reported by Eric Bollengier.
748 kes Apply doc fix from bug #1062.
749 kes Resolve crash and improper restore wx-console Win32 restore
750 GUI. Fixes bug #1065.
751 kes Update Win32 wxWidgets to latest version.
752 kes Attempt to do correct handling of Win32 mount points. Should
754 kes Fix Win32 FD backup/restore memory leak due to improper termination
755 of BackupRead/Write. This fixes bug# 1038.
757 ebl Reduce memory usage for accurate backup, working only with ctime
758 and mtime. (not all Lstat field)
759 About 40MB for my Linux system (400.000 files)
761 kes Add dcr->reserved_volume flag that allows us to release a volume
762 even if it is not vol->released. This allows maxvol2 to work when
763 Volumes expire and we are already writing to the device (i.e. a
764 volume is pulled out from under us by another job terminating after
765 we reserve the drive).
767 ebl Permit multiple command/console per runscript definition.
768 RunScript { command = /bin/true ; command = /bin/false ... }
769 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
770 (restart an application) just after the VSS snapshot on windows.
771 kes Don't zap dcr values during release_volume() as they might
772 have the next Volume to be mounted.
773 kes Fix AIX prototype.
775 kes Second cut of drive switching during backup.
778 kes Update Win32 version of wxWidgets to most recent version.
779 kes Tweak Copy job details.
780 kes Rework dir_find_next_appendable_volume to make a bit more effort
781 to find a suitable volume before giving up.
783 kes Make ask_sysop_to_create... to return if waken from wait.
784 This helps get out of blocked conditions.
785 kes Experimental implementation of switch_device in reservations.
786 kes Implement FD version to allow easier protocol changes.
787 kes Add Plugin Options string -- not yet passed to FD.
788 kes Implement PluginOptions ACL.
790 kes Attempt to correct problems with restores with autochangers and
791 use counts going negative
792 kes Rework SD status command and implement API for bat. Implements
793 header, runing waitreservation, devices, volumes, spooling,
794 and terminated status keywords.
795 .status storage=xxx <keyword>
796 kes Clarify TLS error message by adding double quotes around name.
797 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
798 kes Pass jcr to tls routines so debug messages can be handled better.
799 kes Rework jobq resource allocation code, and possibly fix a bug
800 that caused reference counts to get out of sync.
802 kes Rename fd/dir plugin to use Bacula standard underscore.
803 kes Plugin work -- bring dir up to fd level.
804 kes Start implementation of VTL code
805 kes Fix Win32 build after adding new cats subroutine.
807 kes First cut at Duplicate Job implementation.
809 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
810 kes Start PluginOptions string, and refactor a bit of ua_run.c
811 ebl Apply Allan patch that permit to reset recyclepool.
813 kes Test patch -- possible fix or improvement for bug #1053
814 kes Refactor FD and SD status commands to permit new API code in
815 SD, and to fix Win32 build.
816 kes Win32 build is now working.
818 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
819 some ideas in patch from Scott Bailey.
820 kes Begin implementation of duplicate Job control.
821 kes Fix some of Win32 build after recent additions.
822 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
823 which causes the FD to detect whether or not the OS has the
824 honor no dump bit (*BSD systems), and if so, to skip backing up
825 any file with this bit set. The feature is enabled by setting
826 'honor no dump flag = yes' in the Options section of a FileSet.
828 kes Correct po warning message with datarootdir
829 kes Implement more code in dird.c to put configuration parsing in
830 a class rather than use globals.
831 kes Restructure SD status command for implementation of bat API
834 kes Suppress incorrect 'Will not descend from x into y' messages.
835 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
836 daemon globals used by parser.
837 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
839 kes Fix free of plugin_list when none exists.
841 ebl Apply accurate project patch.
843 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
844 on non-mempool object)
845 kes First cut of converting FD .status to work with bat API.
847 .status client=XXX header
848 .status client=XXX running
849 .status client=XXX terminated
850 kes Implement first cut of Copy Job.
851 kes Implement Catalog in Pool resource. It overrides catalog specified
852 in the Client resource.
854 kes Apply patch (with some difficulties) from Joao Henrique Freitas
855 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
857 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
858 ftruncate() actually works. In the case of some (cheap) NAS devices,
859 it does not, and so recycling NAS Volumes does not work. The code
860 simply unlink()s the file, then recreates it. This fixes bug #1011.
862 kes First incomplete cut of big malloc blocks for htable.
863 kes Tweak plugin code.
865 kes Plugin debug code + tweak a couple bat dialog layouts
867 kes Fix creating first JobMedia record during Migration to include
868 proper index. This caused slow restores of migrated jobs.
869 kes Temp fix to plugin name file_index.
870 kes Bacula backed up and restored a MySQL database.
872 kes Implement plugin restore.
873 kes Implement parsing of db_driver to give db_type index.
875 kes First cut of plugin restore code.
876 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
877 and do not strip paths on symbolic links.
878 kes Set catalog backup database and user name from values specified on
879 the ./configure line.
880 ebl Fix #1031 about wrong pool source information in job report.
883 kes Remove a redundant jcr argument to find_files, match_files, and
885 kes Implement '.status dir header|scheduled|running|terminated' that
886 prints the requested status section. With the exception of the
887 header, the other reports have fields separated by tabs (\t).
889 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
890 a resource embedded run command to find a since time if no explicit
891 since time was supplied on the command line.
892 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
893 that updates the state file at job termination time in addition to
894 when the daemon terminates.
896 kes First version where a plugin did a backup.
897 bpipe-fd.so created a backup file, wrote a test
898 string to it, and Bacua could restore this fabricated file.
900 kes Implement DB Driver = string for the DBI driver.
901 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
902 kes First cut of code for loading Win32 plugin dlls. Implement
903 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
904 and implement a dlfcn.h file based on opengroup's definitions of
907 kes First cut plugin directives.
909 kes Apply patch from bug #1049 to prevent stripping the path on a
911 kes Attempt to fix bug #1047 where stripping a path corrupts the
912 heap. Waiting for feedback.
913 kes Correct the Mount message not to suggest labeling a new tape
914 when doing a restore. Submitted by email by John Stoffel.
915 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
916 FD by using casting. Reported in bug #1042.
918 kes A bit of crypto cleanup. More later.
920 Release Version 2.2.8
922 kes Apply patch from Martin to correct bug #1040, bscan sets existing
924 kes Fixed important spelling error in doc -- bug #1045.
926 ebl Fix bextract to be able to extract non-portable Win32 data to
928 kes Move initialization of read/write res lock earlier in the code.
929 This fixes the crash with a null conf file. This fixes bug
931 kes Redefine CURES in lib/parse_conf to be URES and move it all
932 into lib/parse_conf.c -- this responds to bug #1042, but does
933 not fix it. The fix is not to compile with FORTIFY_SOURCE.
934 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
935 the trunk SVN. I don't think this was reported as a bug.
937 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
939 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
941 kes Add DataDespooling and DataCommitting status (committing is
942 the last despooling).
943 kes Finish implementation of new reservations code noted below.
945 kes Fix bsnprintf for float point numbers. I broke recently when
946 parameterizing some variables. This fixes bug #1036.
947 kes Undo recent reservations changes ... will apply them later
948 when they work better.
950 ebl Fixes #1034 which cause mysql to hang the connection after 8h
951 ebl Change default statistics target of filename.name and path.path
952 fields for PostgreSQL. This speeds lookup by indexes. Thanks
954 kes A few more tweaks to new reservation code. Make sure to clear
955 vol released flag when retaking volume. When reading label and
956 label is bad mark volume unused. When recycling, mark volume
957 unused so it can be renamed.
959 kes Fix reserve_volume() so it doesn't release a volume in use
960 (i.e. a volume entry not marked released). This should be
961 the last part needed to fix bug #1018.
963 kes Move Heartbeat documentation from Job to Director resource.
964 This fixes bug #1033.
966 kes Fix existing switch drive SD code to call autochanger to release
967 any old volume. This must be done to keep the autochanger from
968 releasing subsequently newly reserved volumes in doing a close().
969 This should fix bug #1018.
970 kes Fail if attempting to get console input in batch mode. This
971 should help fail RunScript console commands that are incomplete.
972 kes First cut implementing switch_drive() in SD (not actually called).
974 kes Implement first cut running console commands in a RunScript.
976 ebl Fixes bug #1028 where 'Selection Type' option was not usable
978 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
981 Release Version 2.2.7
983 kes Add new free_tls() entry point so that Win32 builds.
984 kes Fix compile warning in src/lib/util.c
985 kes Fix entry point for edit_job_codes() so that Win32 builds.
986 kes Fix seg fault Frank Sweetser reports in regression testing
987 on his systems. The problem was that the original author of
988 bsnprintf.c did not take into account the side effects of
989 using ++x in the argument to a #define.
990 kes Make SD protocol backward compatible with version 2.2.x.
992 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
993 because Bacula no longer restores sockets.
994 ebl Always use ignorecase fileset option on win32 FD.
996 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
997 that implements double quoting include names in conf files,
998 and also allows piping input by having the first character
999 be a vertical bar (|).
1000 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
1001 that implement %f in RunScripts to pass the FileSet name.
1002 kes Skip leading | when lex input comes from a pipe as suggested
1003 by Michael Stapelberg <michael@stapelberg.de>.
1005 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
1006 Nerijus Baliunas <nerijus@users.sourceforge.net>
1008 kes Implement Plugin Directory and plugin events.
1010 kes Implement a security enhancement: TLS authentication but no
1011 encryption. Enabled by setting 'TLS Authentication = yes'.
1012 Note when this is on, TLS encryption is turned OFF!
1014 kes This patch corrects a problem where the maximum concurrent storage
1015 jobs counter gets out of sync during restore jobs causing jobs to
1016 'wait on max Storage jobs'. This patch fixes bug #1009.
1018 kes This patch fixes bcopy so that it produces correct Volumes.
1020 kes This patch eliminates spurious output to the console during a VerifyVolume
1021 job that contains encrypted data. It fixes bug #1024.
1023 kes This patch prevents the 'status dir' command from trying to use a scratch
1024 volume and possibly moving it from one pool to another. This patch fixes
1027 kes Add new include to postgresql.c suggested by Marc Cousins so
1028 that it compiles correctly with pgre version 8.3.
1030 kes Fix --archivedir addition to configure. Replace it with
1031 --with-archivedir in configure.in This fixes the regression
1033 kes This patch fixes bug #1012 where the job is canceled because
1034 of Max Run Time exceeded when the job has not yet started.
1036 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
1037 one 'part' to write. Instead of each part being stored on disk,
1038 written to DVD, then deleted from disk, all parts are written to disk,
1039 and only the last is written and deleted from disk.
1040 kes This patch fixes the status command to include the formating string for
1041 JS_AttrInsterting. It fixes bug #1021.
1042 kes This patch should fix the Mac OS X build problem on the latest
1043 Darwin, where sys/types.h was not included correctly (apparently
1044 due to a change in the Mac headers). The solution was to explicitly
1045 ensure that it is defined for the ./configure.
1046 This patch also has a rebuild of configure that includes the Debian
1047 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
1048 kes This patch should ensure that queued messages to the console are
1049 displayed as soon as possible. It should fix bug 1007, but has been
1050 reported not to work.
1052 kes This patch fixes the infinite loop when trying to increase the
1053 maximum number of volumes in a Pool during the add command.
1054 This patch fixes bug #1008.
1056 Release Version 2.2.6
1058 db Remove extra data on estimate command in joblist for bat.
1060 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1061 really change anything, but is the beginning of doing it *right*.
1062 To do it completely right the LastWritten date must be passed to
1063 the SD, but it is not yet done.
1064 kes Minor tweaks to some bat restore SQL.
1065 kes This patch fixes bug #1003 where putting the message output from
1066 a Verify job into the catalog results in a recursive loop. The problem
1067 seems to show up only with postgresql (to be verified).
1068 kes Correct %x to %p in postgresql debug statement.
1070 kes Fix bug #942 where lots of emails where generated when the heartbeat
1071 interval was low and Bacula wanted a different tape from the one in
1074 ebl Add new SD despooling attributes and Dir inserting attributes
1075 job status codes in the catalog (Status table).
1077 ebl Use qmake-qt4 instead of qmake when available (debian system).
1079 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1080 that passing the password via the command line (arg 3) is insecure.
1081 This responds to bug #990 (it doesn't fix it).
1083 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1084 kes Fix a crash in bat when it cannot connect to the Director for example
1085 if the Director is not running.
1086 kes Remove redundant INDEX (JobId) from File table in the trunk.
1087 This fixes bug #992.
1088 kes Make explicit exception to GPL in LICENSE to permit linking
1089 the Win32 FD with Microsoft VSS code.
1090 kes Apply the Solaris package patch from
1091 Masopust, Christian <christian.masopust@siemens.com>
1092 kes Apply the patch to optionally add a timestamp in the debug output
1093 submitted by Mariusz Czulada <manieq@wp.eu>.
1095 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1096 backend (sql_strerror). Fixes bug #989
1098 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1099 It applied with no problems.
1100 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1101 awk are on the path.
1102 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1103 since the status is returned on stderr on Solaris.
1104 kes Activate Close button on tray-monitor window. This fixes
1106 kes Check for NULL item in parse_conf.c before calling it. In the
1107 case of Device, there is no item and this caused a seg fault when
1108 Device appears in the conf file.
1109 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1110 avoids pulling in config.h multiple times in some new code.
1112 kes Fix spurious warning message printed when creating a volume with
1113 a LabelFormat. This fixes bug #976.
1115 Release Version 2.2.5
1117 kes Add JobId in place of Job name in all the Jmsg() output.
1118 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1120 kes Make maxvol-test and new more strict maxvol2-test work.
1121 kes Print JobId in all Jmsg() job output.
1123 kes Add new SD despooling attributes and Dir inserting attributes
1124 job status codes. This fixes bug 961.
1125 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1127 kes Fix doc issue. This fixes bug #963.
1128 kes Fix listing performance problems in bat. Pointed out by
1130 kes Remove old debug code.
1131 kes Fix bat code that tests for Win32. This should fix bug #968
1132 kes Query 5 list wrong Vol after migration. This fixes bug #960
1134 ebl Fix #969 where user can't change Replace option in restore menu.
1136 kes Save jcr in thread specific data (tsd) for each thread.
1137 kes Make Dmsg() print JobId as -%u.
1138 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1139 for the thread if it exists.
1140 kes Remove old reservation debug jid code.
1141 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1142 ebl Add an option that permit to specify spool size in job
1143 definition. (Applying patches/testing/spoolsize_per_job.patch).
1144 You must upgrade SD and DIR at the same time.
1145 dvl Add new configuration item --archivedir
1146 dvl Adjust regression tests to use tmp not /tmp. This will allow
1147 multiple concurrent runs of the regression tests.
1149 kes Fix race condition that drops final block written to volume.
1150 This happens in rare cases with multiple simultaneous jobs
1151 when the Volume fills. This fixes bug #964. May be related
1152 to bug #935 and possibly #903.
1153 kes Eliminate more strerror() and replace with bstrerror().
1154 kes Remove BSD getopt and replace with unrestricted IBM version.
1155 kes Fix Win32 build for changed calling sequences.
1156 kes More tweaks to the mount volume routines to get everything
1157 right. Changed variable name from find to have_vol, which is
1158 much easier to understand.
1159 kes Enhance btimer debug code.
1161 kes Fix FD->SD authorization failure, which was due to spurious
1162 wakeups from a pthread_cond_timedwait(). Simply check the
1163 predicate before continuing. This fixes bug #953.
1164 kes Add const char where needed (more to do). Remove temp debug code.
1166 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1167 kes Don't overwrite error message in check_tables_version.
1169 kes Unlock batch insert tables with same calls used elsewhere.
1170 kes Allow starting 59 jobs a second.
1171 kes Make SD session key more random.
1172 kes Add retry for SQLite opening db if it fails. Probably helps
1174 kes Suppress extra error messages during batch insert failure.
1176 kes Add jcr to timer packets so if killed message can be sent to job.
1177 kes Add JobId to all Dmsg() output.
1178 kes Put some FD auth code on dbglvl rather than fixed.
1179 kes Return insert attributes error message in db msg buffer to avoid
1180 false error messages. Helps fix bug #966.
1181 kes Separate batch init error messages. Probably helps fix bug #966.
1182 kes Make SD code that contructs attribute insert check string lengths
1184 kes If Dir gets an error during inserting attributes, cancel SD.
1185 This reduces unnecessary error messages.
1187 kes Correct search boolean for getting Volume info
1188 ebl Cleanup batch insert code. Probably fixes bug #965.
1189 kes Back out one small change to the reservation system (reserving a volume).
1190 kes Rework how a Volume is mounted. It is now much more intelligent and
1191 will always attempt to use any mounted volume if possible and reduces
1192 calls to the Director asking about volumes.
1194 kes Turn off some code when batch insert not enabled.
1195 kes Edit FD name in connect error messages.
1196 kes Rework the reservation system to take into account that the Director
1197 might give us a Volume that is different from the current one being
1198 used, and to ensure that we don't exceed Maximum Volume Jobs.
1199 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1200 fatal error with multiple jobs running'
1201 kes Add more debug code in reservation system.
1202 kes Implement maxvol-test to check bug #947.
1204 kes Add code to handle tray monitor separated from Win32 FD.
1205 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1207 kes Add missed return in fixing verify bug -- trunk only.
1208 ebl Fix a command parser issue causing a director segfault.
1209 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1210 This fixes bug #954.
1211 kes Increase the max block size to 4MB fixes bug #957.
1212 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1213 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1214 is not properly mounted (recognized) during a poll.
1215 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1216 Job that has differences reports Verify OK.
1217 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1219 ebl Add an option to operate on all pools with update vol parameters.
1220 This complete the project 20. Patch from Nigel Stepp.
1221 ebl Add history support to bconsole when using readline.
1222 Using Ctrl-D to exit doesn't update .bconsole_history
1223 kes Modify new volume algorithm to use max MediaId for generating next
1224 volume number rather than the count of Volumes. This should essentially
1225 eliminate the failure rate if some volumes were deleted. Bug #921.
1226 kes Begin implemention of Optimize Job Scheduling.
1227 kes Implement restore callback that Dirk and I agreed on for bat
1228 restore. This fixes bug #928. Restore of backup of zero files fails.
1229 kes Fix SQL Catalog logging which broke with new db_escape_string
1232 Release Version 2.2.4
1234 kes Fix bacula_cats.def for new db_escape_string().
1235 kes Increase size of name string when FD making connection to SD.
1236 May fix bug #953. FD->SD connection failure.
1238 kes Add code to help Dan debug 2drive-incremental-2disk test.
1239 kes Add code to try to fix bug #908.
1240 kes Add waits to multiple exit detection code to try to force pid
1241 file to always be deleted.
1242 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1243 This fixes bug #950.
1244 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1245 trying to switch drives by checking for blocking before unblocking.
1247 kes Cancel storage daemon in all cases where FD reports error. This
1248 should fix virtually all cases of bug #920.
1249 kes Fix db_escape_string() for MySQL which did not compile.
1251 kes Fix error message that was clobbered when Dir tells SD it does not
1252 have write permission on Volume. This should fix a minor point
1253 in bug #942, but not the main problem.
1254 kes Add code to cancel job in SD if FD connection fails. This should
1256 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1257 dvl Pass jcr and db into db_escape_string() to enable better escaping
1259 kes Fix migration code to get correct Volume name with multiple volumes
1260 by skipping |. Fixes bug #936.
1261 kes Implement patch supplied by Landon to fix bug #944 where using
1262 TLS with bconsole uses 99+% of the CPU.
1263 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1265 kes Move patches into patches directory.
1267 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1270 ebl Using 'm' in bconsole will show messages like before,
1271 and not memory usage.
1272 kes Fix bug #935, and probably also bug #903 where files were not
1273 restored. MediaId was not properly set in JobMedia record after
1276 kes Suppress chown and chmod error messages if the FD is not running
1279 kes Apply Martin Simmons' patch that should turn off the new API usage
1280 when batch insert is turned off allowing building on older
1282 kes Add ./configure search in qwt-qt4 for qwt package
1284 kes Bacula is now free of 3rd party GPL copyrighted code!
1285 kes Remove idcache.c
1286 kes Add guid_to_name.c/h which replace idcache.
1287 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1289 ebl Detect if new PosgreSQL batch insert API is present.
1290 kes Correct incorrect mempool call causing Director crash. Occurs on
1291 systems without va_copy().
1292 sb Update spec files for 2.2.1 release
1294 kes Fix memory pool call in ua_output.c. bug #934.
1295 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1296 Add test program to fnmatch.c
1298 kes Integrate patch to README.vc8 from
1299 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1300 edit it to get it into Unix patch format.
1301 kes Implement mkpath.c to replace old FSF makepath.c
1303 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1305 Release Version 2.2.1
1307 kes Update POTFILES.in
1308 kes Cleanup a few underquoted AC_DEFUNs in configure
1309 kes Apply patch from Martin Simmons that adds a test for va_copy to
1312 kes Fix bug #921 by increasing the number of tries to create a new volume
1314 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1315 can be called multiple times. Implement a version for machines
1316 without va_copy() that gets a big buffer.
1318 kes Integrate more portable zone offset code into bsmtp.c
1319 Submitted by Attila Fülöp.
1321 kes Fix bad SD->FD return status reported by
1322 (James Harper) <james.harper@bendigoit.com.au>
1323 ebl Fix a bug in read_close_session which return random status
1324 thanks to James Harper
1326 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1327 and directory names during restore of single file/directories.
1328 kes Add sanity checks to .sql command when string is empty. Hopefully
1329 that will resolve Dirks Director crash.
1331 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1332 in the bsmtp chat subroutine when debug is >= 10.
1334 kes Fix Director crash when running bat SQL queries.
1335 kes Add David's notes on Item 8: Copy pools.
1337 kes Rework projects file to be current and ready for a vote.
1338 kes Enhance lex scanner error message.
1340 kes Tweak LICENSE file to mention BSD code.
1341 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1342 if specified on the ./configure.
1343 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1344 This class is intended to allow us to open a second bsock to the
1345 Director while in the restore subdialog.
1347 kes Fix configure to create bat Makefile before creating dependencies.
1348 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1349 kes Add a tooltip to the tray monitor.
1350 dvl Set the Director's PID file before dropping privs. This fixes
1353 kes Update AUTHORs file
1354 kes Increase the default max concurrent jobs to 20 in FD and SD to
1355 correspond with the default .conf files.
1356 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1357 some different, of the same file created by RN when porting the
1359 kes Rearrange some of the Win32 directories and the placement of the files
1361 kes Set DEVELOPER flag in version.h
1363 ========================================================================
1364 Release Version 2.2.0
1366 kes Apply a second doc patch from Marc.
1367 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1368 improves the tips section that discusses how to setup multiple
1371 kes Update bat README file.
1372 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1373 corrects a typo in the Recycle status check in db_find_next_volume().
1374 This will probably fix a number of annoying problems with multiple
1376 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1377 bnet calls -- no functionality change.
1379 kes Modify the Verify output to specify if files are missing on
1380 the Volume(s) or disk. Fixes confusion in bug #916.
1381 kes When more than one Volume is read in a migration job, the last
1382 Volume bytes reported are from the last read volume rather than
1383 the last written volume. Fixed. This fixes bug #910.
1384 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1385 It previously printed New Recyle flag is: no. This fixes bug
1388 kes Correct seg fault when switching tape drives during restore.
1389 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1390 be used until after 2.2.0 release.
1392 kes Remove fnmatch() in SD that permitted wild card specifications.
1393 This fixes bug #914.
1395 kes Fix %g in filename returned by SQL for browse tree reported by
1397 kes Fix configure so that it puts config.out in the cwd rather than
1399 kes Attempt to fix the locking problem reported by Eric in bug #906.
1400 kes Make berrno class to leave errno unchanged after constructor call.
1401 kes Make bnet_server use the heap rather than the stack to allocate
1402 its socket fd pointers to avoid a crash at termination. Problem
1403 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1405 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1406 and putting it in depkgs-qt along with Qt4.3.
1408 kes Rework code in acquire.c that switches drives for reading when
1409 the Media Type does not match. This should fix bug #906
1411 ebl Fix a director segfault during job setup #907
1412 kes Correct seg fault in postgresql when first operation returns no
1413 rows. Fixes Dirks File browser problem seg fault with bat.
1415 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1416 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1419 kes Implement PopUp YES/NO dialog for bat.
1421 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1423 kes Correct RunScript to terminate job in FD on failure.
1424 kes Change abort_on_error and AbortJobOnError to fail_on_error
1425 and FailJobOnError in RunScripts.
1426 kes Minor tweaks of code formating in RunScripts, principally to
1427 avoid depassing 80 columns.
1429 kes Eliminate one #ifdef Win32 in bsmtp
1430 kes Implement grow tool to grow a file for testing very large databases.
1431 kes Add big-vol-test to test Bacula seeking with > 5GB.
1434 kes Modify find_next_volume() to return all values in Media record.
1435 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1439 kes Update Release notes
1441 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1442 Warning, in previous beta version, all media get from scratch keep their
1445 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1446 This should fix bug #842. Made a note to look at removing the temp
1447 files at the end of the install.
1448 kes Add ability to mount and unmount a file device providing it is
1449 marked as being removable and has the appropriate mount and unmount
1450 commands defined in the Device resource. This fixes bug #830.
1451 kes When applying a storage override, release all previous storage
1452 definitions rather than just prepending the new storage.
1453 This should prevent a good deal of confusion.
1455 kes Implement ./configure search for qwt libraries.
1457 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1458 Win32 FD. This should fix bug #893.
1459 kes Remove an unnecessary beep in Win32 init code.
1460 kes Update copyright dates in Win32 executable about boxes.
1461 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1462 code with a BSD getopt.c and getopt.h.
1463 kes Remove sched.h from the Win32 compat directory -- not used.
1464 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1465 need to shut it down, do it through the services panel or the command
1467 kes Remove some inappropriate Bacula FSFE copyrights.
1468 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1469 kes Fix regress config non-portable test as pointed out by
1470 Florian Heigl <florian.heigl@gmail.com>
1471 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1472 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1474 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1475 Reported by Frank Sweetser.
1479 kes Fix client-only build.
1480 kes Integrate client-only fixes for bsys (initgroups) and conio from
1481 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1482 kes Make arguments to get_scratch_volume() in same order as other
1484 kes Rework the prune_volumes() subroutine so that after purging and
1485 no volume found in desired pool, it will check for a scratch
1486 volume. This prevents recycling the whole scratch pool.
1487 kes Add code to status storage to print boffset_t (largefile support).
1489 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1490 kes You now need a --with-qwt=<dir> to be able to build bat.
1491 kes Update src/win32/cats/bacula_cats.def to include the new
1492 db_get_query_dbids() call on Win32.
1494 kes Correct a problem when selecting a scratch volume and moving
1495 it to another pool that lost some columns.
1496 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1497 kes Enhance Autochanger error messages to include Volume and device name.
1498 kes Rework prune_volumes() code to take account of InChanger flag,
1499 and to handle recycling volumes going to the Scratch pool and
1500 current pool because the RecyclePool directive.
1501 kes Implement a better and more efficient db_get_query_dbids() to
1502 handle creating and passing back a list of DBIds.
1506 kes Start work on new more efficient DBId subroutine. First use
1507 will be for recycling volume to Scratch inchanger.
1508 kes Increase number of JobIds in pruning from 1000 to 10000.
1509 This to be replaced by above routine.
1510 kes Begin implementation of building Qt4 on Win32.
1511 kes Correct typo in fix I added for bad TLS shutdown.
1512 kes Pull 2.0.3 patches into patches directory.
1513 kes Update Release notes. Include qt-console in line count.
1514 kes Update Projects file.
1516 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1517 bug in migration code where a job that spanned two volumes
1520 kes Implement new BST_DESPOOLING blocked state. Change from locking
1521 during despooling in SD to blocking. This means that other threads
1522 can work with the device structure, in particular the reservations
1523 system while despooling.
1525 kes Fix return in reservation message queue that missed clearing
1526 the jcr lock (implemented 26Jun07 below).
1527 kes Rename a number of dev methods to make locking function names
1529 kes Document locking in lock.c. Move lock structures to new file
1532 kes Move reservations message lock to lock jcr only this
1534 kes Move main SD locking code into lock.c (new file).
1535 kes Update Win32 build to include lock.c
1539 kes Dirk committed the qwt library code for drawing graphs in bat.
1540 kes Tweak install of qwt so that it is integrated with ./configure.
1542 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1543 out by Eric (my typo).
1544 ebl Fix configure.in to get batch mode enable
1545 kes Return correct string from authenticate.cpp in bat when connecting
1547 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1548 spurious line drops when using TLS.
1549 kes Do not file reparse points when restoring a file that already
1552 kes Implement Windows reparse points -- similar to directories, but
1553 we do not descend into it. This is a first cut. They seem to
1554 be backed up, but restore is not yet tested.
1555 kes Remove restore_blocking in tls code when shutting a socket to leave
1556 it in blocking mode. Hopefully this will fix the encryption bug
1557 reported by Frank Sweetser.
1558 kes When opening a file for backup, tell the OS that we are going to
1559 read it sequentially -- optimization.
1560 kes Change variable names in authenticate_director() to not conflict
1561 with member names in bat. Caused great confusion with compiler,
1564 kes Queue openssl error messages in case of comm problem.
1565 kes Do shutdown() call if socket terminated.
1566 kes Remove some duplicated code in tls.c
1567 kes Move more of the bsock member variables into private and access
1569 kes Add Frank Sweetser's tls-test to the regression suite.
1571 kes Add Swedish sv.po file
1573 kes Don't print clock skew message in FD if less than 3 seconds diff.
1574 kes Add a bit of VSS info to status client.
1575 kes Implement a first cut of Vista VSS, using Win2003 code.
1577 Release: 2.1.20 beta
1579 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1580 loaded tape but uses first drive).
1581 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1582 This was indeed a Win32 issue.
1584 kes Simplify search of autochanger for in-use Volume.
1585 kes Fix exit condition of check for in-use volume. kes Remove
1586 inappropriate my_postgresql_free_result() in db_close()
1588 kes Fix bad return in FD when encryption signature not found.
1589 Probably caused a crash.
1590 kes Inhibit missing encryption signature error messages for
1591 file types where no signature computed.
1592 kes Correct inverted check on autochanger in reservation system.
1593 kes Tweak debug code in autochanger reservation.
1595 kes Add some additional locking in the cats directory in subroutines
1596 that modify packet variables called from batch insert.
1597 kes Rework how dcrs are allocated. new_dcr() can now be called
1598 with an existing pointer, and it will simply clean it up.
1599 This allows the reservation system to test various different
1600 devices, and will permit easy device changes.
1601 kes A bunch of changes all over to handle new new_dcr() calling
1603 kes Work more on the Volume management in the SD. Remember Volumes
1604 for tape drives and for autochangers (even virtual disk changers).
1605 kes When looking at the Volume list to reserve a drive, handle
1606 autochanger names correctly by interating through the changer
1607 devices. Also call the Director to see if a Volume is suitable
1608 for the current job.
1609 kes Fix some bugs in bscan. Make sure all media records are written.
1610 Make sure that valid JobMedia records are written for disk files.
1611 Previously they were completely wrong.
1612 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1613 that the URLs don't change and so that the developers will all
1614 work off the same copy. Rebuild from scrach.
1615 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1617 Release: 2.1.18 beta
1619 kes Fix seg fault in FD from incorrect digest size.
1620 kes Fix argument to non-OpenSSL crypto.c subroutine.
1622 Release: 2.1.16 beta
1624 kes Remove a few malloc()s from the encryption code.
1625 kes Use the class calls to bsock in filed/backup.c and restore.c in
1626 place of the old bnet_xxx code.
1627 kes Implement code that does an on the fly calculation of the
1628 signing digest during restore of encrypted files. It makes
1629 a best guess at the algorithm, and if it is not correct, will
1630 then revert to the old code which reads the file after it is
1632 kes Implement at least one missing crypto stream in stream_to_ascii()
1633 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1634 #877 where a reload with bad syntax causes Dir to exit.
1636 Cut: 2.1.14 beta (not released)
1638 kes Do not free a volume on a tape drive until another volume is
1639 mounted and read, or the autochanger unloads the volume.
1640 This should help the SD re-use volumes that are already mounted,
1641 and should fix bug #886.
1642 kes Apply patch from user brettedgar that allows gnome2-console include
1643 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1644 kes Apply patch from Lucien Weller that fixes day of week calculation
1645 because of DST flag problem. Fixes bug #887.
1647 kes Move find_next_appendable_volume() to after acquiring a valid device
1648 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1650 kes Unable to reproduce bug 872. However added additional testing for
1652 kes Bug #874 resolved by documenting SQLite limitations.
1653 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1654 kes Bug #881 resolved by removing typo in mtx-changer script.
1655 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1656 approval. Added a link to the wiki on the web page, and implemented
1657 a backup from http://paramount.ind.wpi.edu
1659 kes Fix update allfrompool to pass pool name.
1661 kes Convert to pure GPL v2 license.
1662 kes Fix sscanf problems reported by Peter Buschman that caused
1663 a bus error on Solaris.
1664 kes Rework (simplify) the select prompt in bat.
1665 kes Move get_jobid_from_tid() into lib and create a
1667 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1668 should definitely fix the problem of lost error messages in the
1670 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1671 kes Eliminate tcpd.h from the project. Enclose the #include from the
1672 library with extern C ...
1673 kes Add print of signal name when a signal is trapped.
1675 Release: 2.1.12 beta
1677 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1679 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1680 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1681 makes SQLit3 run 30 times faster, though a bit less safe.
1682 kes Implement --with-batch-insert in configure and detection of thread
1683 safe libraries. It is on by default, but turned off if no thread
1684 safe library (e.g. SQLite 2) is available.
1686 kes Fix Bacula PostgreSQL buffer overruns.
1687 kes Do better checking for NULL results returned from PostgreSQL;
1688 implement retry for failed queries; clear results buffer after
1689 failed query. Hopefully this will correct the PostgreSQL failures.
1691 kes Implement algorithm to handle only one appendable volume with
1692 Prefer Mounted Volumes = no.
1693 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1694 returned from a query.
1695 kes Make volume lock recursive.
1696 kes Implement an additional volume reservation algorithm that
1697 starts by considering all reserved volumes then uses the
1698 old brute force algorithm of searching the resources to
1699 find a suitable device.
1700 kes Add new reservations debug code and refine the old code.
1701 kes Update the win32/dll/bacula.defs file.
1703 kes Tweak reservations algorithm to permit a few more cases, i.e.
1704 volume reserved, but on different drive, ...
1705 kes Enhance SD status to include Pool and Media Type for drive in a
1706 more readable format (a bit longer).
1707 kes Fix PostgreSQL double free.
1709 kes Minor refactoring of restore decryption code.
1710 kes Add code to smartall.c to detect double free of a buffer.
1712 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1713 so that bsmtp will create a correct email address (mailbox only).
1714 kes Modify 'memory' command so that the buffers are listed as 'In use'
1715 to avoid confusion with Orphaned buffers.
1716 kes I reworked the OpenSSL include/lib flags to be handled in
1717 the standard Bacula way, which should fix bug #863 concerning
1718 non-standard OpenSSL libraries.
1720 kes Implement Help Browser window for bat.
1721 kes Fix reload bug that reset StorageId to zero.
1723 kes Fix TLS #ifdefing when TLS turned off.
1724 kes Ensure that when labelling a tape with Slot=0 that InChanger
1726 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1728 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1729 add DISTINCT (required by PostgreSQL).
1730 kes Implement BSOCK authenticate_director() method. Eventually will
1731 authenicate all daemons.
1732 kes Move several more functions into the BSOCK class.
1734 kes Add code to tell the OS that we no longer need a cached
1735 file that we were reading. In findlib/bfile.c. Also,
1736 only cache files that we are reading. Thanks to
1737 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1738 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1739 kes Implement script to automatically generate cats and dll .def
1740 files for Win32 dll.
1741 kes Update README.mingw32 to include new .def file generation.
1742 kes Correct typo in UTF-8 error message as reported by:
1743 jhernandez <julianhernandez@gmail.com>
1744 kes Add additional sm_check() code on debug level 1.
1745 kes Set default debug level to 1.
1746 kes Trap SIGABRT in attempt to get traceback.
1748 kes Reduce bat connect timeout from 30 to 15 seconds.
1749 kes More restructuring and implementing BSOCK class in place of
1751 kes Remove a few unnecessary malloc() tests in crypto code.
1752 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1753 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1754 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1756 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1758 kes Fix Verify InitCatalog. The attributes were not pointing to the
1759 correct saved location.
1760 kes Implement message callback so that GUI is sure to get all
1761 daemon messages. Currently displayed in a dialog in bat.
1762 kes Ignore SIGUSR2 (Bacula timer) in bat.
1763 kes Apply regress patch from bug #859 to allow regress to work
1764 with Solaris compiler.
1766 kes Begin adding TLS support to bat.
1767 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1768 clean up lex.c and make it more readable.
1770 kes Move more bnet functions into the BSOCK class.
1771 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1772 kes Complete change of berrno strerror() method to bstrerror()
1774 Release: 2.1.10 beta
1776 kes Cleanup incorrect email addresses in bsmtp.
1777 kes Make bat display initial messages rather than discard them.
1779 kes First cut of adding .mod to the run command.
1780 kes Implement auto display of messages in bat.
1781 kes Enhanced preferences to allow all Bacula output to be
1784 kes Try to make bsmtp date routines more generic.
1785 kes Fixed bug #856 autochanger documentation.
1786 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1787 kes Add new cats entry point so Win32 builds.
1789 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1791 kes Do better checking for the MySQL 64 bit libraries looking for both
1792 .a and .so libraries.
1793 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1794 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1795 kes Require the thread safe version of MySQL during configure. Thanks
1796 to Andre Noll for pointing this out.
1797 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1798 continuing in migration code.
1799 kes Apply implementation of tray-monitor font derived from gnome-console
1800 submitted by Andreas Piesk <a.piesk@gmx.net>
1802 kes Eliminate important memory loss in SQLite
1803 kes Fixed the batch insert MySQL thread specific data that was not
1804 being freed. See cats/mysql.c:db_thread_cleanup().
1805 kes Fix restore before command.
1806 kes Convert old hdr.name to name() in a few places.
1807 kes Implement update jobid command.
1808 kes Return all time_t dates in db_get_job_record()
1809 kes Stop watchdog in SD earlier.
1810 kes Put Pool just after Storage in please mount message.
1811 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1814 kes Update the po files.
1815 kes Fix Verify InitCatalog by making it cache attributes.
1817 kes Change name bacula-bat to bat for man 1 page to correspond to
1819 kes Check for client and store NULL pointers in status command. This
1821 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1822 kes Fix sign extended editing of %p.
1823 kes Clean out a little old #ifdefing in cats/mysql.c
1825 kes If time diff between DIR and FD is more than 600 seconds convert
1826 INFO message to WARNING.
1827 kes Implement heap size display in status for all daemons.
1828 kes Attempt to fix MySQL db open memory loss (not successfull).
1829 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1830 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1831 Query. This looks like a MySQL but but by doing extra releases,
1832 the memory goes away. This should fix bug #847.
1834 kes When backup fails, cancel SD before waiting for sd termination.
1835 kes If SD is waiting for FD to connect during cancel, wake up the
1837 kes Fix fsf code so that errno is correctly reported.
1838 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1840 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1841 so that Bacula doesn't later stumble into a seg fault.
1842 kes Use the term Restore Client in the restore Job report.
1843 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1844 the original job's FileSetId.
1845 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1846 spooling in migration jobs. Not yet tested.
1847 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1848 reading conf file from a pipe. However, do it with open_bpipe()
1849 rather than popen. Not yet tested.
1851 kes Fix an ugly bug where the VolCatBytes were getting updated
1853 kes Implement bconsole memory command that prints current memory
1854 usage, plus smartalloc dump.
1855 kes Clarify some error messages in backup, admin, and migrate.
1856 kes Shrink label dialog to smaller size.
1857 kes Invert Cancel OK buttons on restore to be OK Cancel.
1858 kes More strerror() to bstrerror() conversions.
1860 kes Start implementing bstrerror() in place of strerror().
1861 kes Stripping path -- seems to work.
1863 kes Prevent door and port files from being restored (mostly
1865 kes Free an unreleased buffer in compat code.
1866 kes Change console Job name from *Console* to -Console- to eliminate
1867 Win32 filename problems. Put Win32 path separator when creating
1868 Console file. This fixes bug #846.
1869 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1871 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1873 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1874 to force Win32 error message.
1876 kes First cut strip path. The data should be passed to the FD,
1877 but nothing is done with it yet.
1878 kes Enhance the digest and signature routines in the crypto
1879 library to accept a JCR and to use it to print error messages
1880 so that they will go in the Job report rather than the daemon's
1882 kes Simplify some of the verify signature code.
1883 kes Simplify a few of the alternative returns in the signature
1886 ebl Use only POSIX regex instead of GNU regex in breg.c for
1887 File relocation. It fix broken freebsd compilation.
1888 kes Convert all other Dir files to use new ua class message
1890 kes Tentative fix for missing digest signature in bug 807.
1891 kes Correct handle problem in new win32_ftruncate routine.
1892 kes Convert ua_purge.c and ua_update.c to use new ua class
1893 message routines for bat.
1895 kes Correct incorrect installation of LICENSE in Win32 installer.
1896 kes Display LICENSE at the beginning of the Win32 install.
1897 kes Attempt to correct the need for the png files to be installed
1899 kes Reapply my bat.conf install script in qt-console. I think I
1900 editted bat.pro instead of bat.pro.in and it was lost.
1901 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1902 the /var/lock/subsys for subsysdir. Also corrects typos in the
1905 kes First cut update job.
1906 kes Correct configure to include qmake of src/qt-console directory.
1908 kes Make restore job yes/mod/no print in one command so GUI works.
1909 kes First cut implementing backup and restore client.
1910 kes Correct editing in Verify output that caused a seg fault.
1912 kes Insure that bat.conf is not overwritten during installation.
1913 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1914 while I was implementing migration in March 2006 !
1916 ebl Cleanup file relocation, using char *RegexWhere instead of
1917 char *where + bool where_use_regexp
1918 kes Update some manpages and add bat manpage.
1919 kes Make a first cut at converting bacula.spec.in for bwx-console
1921 kes Apply patch from John Goerzen to add hostname as fourth argument
1922 to make_catalog_backup script.
1923 kes Fix typos I introduced into bsmtp.c
1924 kes Make pm_strxxx() routines handle input of NULL pointer. This
1925 is to protect from NULL pointers returned from SQL databases.
1926 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1927 kes Add more debug to FIFO code -- fix fifo regression test.
1929 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1930 kes Add thread timer to bnet_connect() to break from OS if wait time
1933 kes Update Win32 build to include new files, new symbols, and
1935 kes Implement socket level heartbeat (tcp_keepidle)
1936 ebl Commit File relocation patch
1937 kes Make bat have 'make install' target.
1938 kes Warn during install if old gnome-console binary found.
1939 kes Warn during install if old wx-console binary found.
1940 kes Add -8 option to bsmtp command line to add content type utf-8.
1941 Fixes bug #809. (Character coding problem in bsmtp).
1942 kes If < is found in target (from, to, cc) then do not enclose the
1943 target in < > in bsmtp. Fixes bug #772 (malformed address).
1944 kes When printing certain items in dbcheck, stop after 300000.
1945 Fixes bug #822. (dbcheck loops).
1946 kes Incorrect status in Dir after waiting for mount with poll set.
1949 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1951 kes Print waiting to reserve a device every 5 mins.
1953 kes Don't call close_part in label.c if tape and relabel.
1954 kes Don't free volume if busy in close() -- should help with
1956 ebl Fix #824 RunScript bug (After script could be execute twice)
1957 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1958 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1959 Add a regression script to test RunScript
1961 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1964 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1965 deprecated. No additional bugs will be fixed, and they will be dropped
1966 in a future release (probably 2.4.0).
1967 kes Change name of wx-console to bwx-console to make it more Bacula
1969 kes Change the name of gnome-console to bgnome-console to make it
1972 kes Some time in March, a Feature Request with patch from Jorj Bauer
1973 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1975 The ability for the director to validate a Client (FD) CN against
1976 an arbitrary set of patterns rather than the hostname, with
1977 A new 'TLS Allowed CN' set of directives which are implemented
1978 in the Client resource. Then pattern matching is used in place
1979 of hostname matching against the Certificate's CN. As an example, we
1980 have certificates which (a) use a local CA, and (b) have a CN of the
1982 kes Add new/changed entry points to Win32 build
1983 kes Create unaccepted-projects for projects that are not accepted.
1984 kes Simplify locking in the reservations system.
1985 kes Add more debug code in reservations.
1986 kes Make sure error condition on reserving a volume is handled correctly.
1987 kes Correct handling of volume_in_use.
1988 kes Correct handling of initializing a device.
1989 kes Move handling of broadcasting releasing a device into release_device().
1990 kes Correct attaching dcr to dev so that it is only done if device
1991 is properly initiated.
1993 kes Locking debug level tweaks in SD.
1994 kes Tweak new Volume code.
1996 kes Add exec external-command [wait-seconds] to bconsole. This
1997 executes the external-command. Note! normally external-command
1998 should be enclosed in double quotes.
1999 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
2000 it should normally be off in a production system.
2002 kes Implement die command for SD so that we can force it to dump.
2003 kes Implement SD lock debug code.
2004 kes Implement new algorithm for keeping Volume list in SD. It
2005 is now owned by the device.
2007 kes Implement new code for freeing in use volumes that should
2008 resolve if not all, some of the problems of multiple drive
2009 tape conflicts described in bug 801.
2011 kes Fix gui/bacula-web/images files in svn.
2012 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
2014 ebl Fix a bug in batch mode (in string escape)
2015 kes Correct migration prune SQL typo that crept in in a
2016 recent 2.1.x change.
2018 kes Move bnet_despool() into class in bsock.c
2019 kes Modify job report to include director name and Build OS.
2020 kes Move drop root privilege and check_catalog() before fork.
2021 kes Add update database scripts (version 9 to 10) to updatedb directory.
2023 ebl Check size and age of each file after its backup to see if
2024 it has changed during backup, if 'checkfilechanges' is set.
2025 The FD will do an extra check (stat(2)) after
2026 each file backup. mtime, ctime and size are compared with
2027 'before backup' information. If time or size mismatch, an
2028 error message will be generated. You must upgrade FD to use it.
2030 kes Make database name and user configurable
2031 --with-db-name=xxx --with-db-user=xxx
2032 kes Add back database type to message.c for debugging.
2034 kes Implement dir_sql() which issues an SQL query.
2035 kes Modify bat medialist to use dir_sql() and do some minor C++
2036 formatting as well as eliminating a number of pointers, simplifing
2039 kes Fix some of the mtx-changer grep commands for tape label readers.
2040 kes Convert a number of bsendmsg into the appropriate send/warning/error
2041 message class calls.
2042 kes Suppress the using database message in the .sql command.
2043 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
2045 kes Add context menu for floating a window.
2046 kes Some minor cleanup and name changes in qt-console
2047 kes Add doing mt setblk 0 in Win32 mtx-changer.
2048 kes Apply Martin's bug fix to move definition of ENODATA for
2050 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
2051 sqlite2 and sqlite3.
2053 kes More pruning cleanup.
2054 kes Turn on wait_for_drive by default in mtx-changer.
2055 kes Turn on Batch insert code by default as it now passes regression.
2056 kes Add ./configure --enable-bat to enable building of Bat.
2057 No install yet though.
2059 kes Implement a new .sql command for bat.
2060 kes Implement code to turn off pruning in obtaining the next volume.
2061 Pruning is turned off for the status dir command, but turned on
2062 for SD requests and for the list nextvolume command.
2064 kes Correct Qmsg() that was not updated correctly when committing a
2065 previous change (probably the recent TLS patch).
2067 kes Write new subroutine is_volume_purged() that explicitly checks
2068 if the Volume is purged, and if so marks it as such. This should
2069 resolve problems reported about needing to mount twice to recycle
2071 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2072 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2073 amount of duplicated code.
2074 kes Do volume pruning only for the Media Type desired (reduces pruning time
2075 if multiple Media Types are in the same pool).
2076 kes Implement more detailed info in the Job report for the Bacula version
2078 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2080 ebl Add bbatch tool to bench database and insert mode.
2081 Fix sql quote stuff in batch mode
2082 Fix sql stuff for mysql
2084 kes Correct problems with am/pm scheduling. Fixes bug #808.
2085 kes Implement new prunning code that prunes up to 1000 jobs at
2086 the same time. The same technique can be applied to a number
2087 of other prune/purge subroutines.
2088 kes Add an insanity check when starting a new tape job to ensure
2089 that the tape position has not been changed. If so fail the
2091 kes Fix Win32 build for dlls to add the folllowing:
2092 src/lib/bsock.c -- new file with new entry points
2093 src/lib/dlist.c -- new entry points
2094 src/cats/sql_create.c -- new entry point
2095 src/cats/sql_cmds.c -- new DATA item exported
2097 ebl batch mode cleanup bscan-test is ok now.
2098 kes Implement SD code to check length of disk volume before appending.
2100 kes Correct return status on db_batch... routines.
2101 kes Add call to db_write_batch_file_records() to migration code.
2102 ebl Fix AfterJob timing
2103 kes Move the checking of the database in initializion of the Director
2104 to after we drop privileges. This avoids the need for both root
2105 and bacula access to the DB.
2106 kes Correct a misplaced variable definition in src/filed/backup.c
2107 kes Correct how the new batch insert db_create_attributes_record()
2108 uses the arguments. Caused a seg fault in bscan.
2109 kes Implement lock() and unlock() methods in DEVICE class.
2110 Implement block() and set_block(xx) methods in DEVICE class.
2111 kes Modify bnet_connect() so that it uses time() to check for the
2112 wait time expiring (on some OSes, some system calls may not
2113 return immediately).
2114 kes Modify Verify to obtain the previous JobId when it is actually
2115 running rather than at schedule time (as it was in 1.38.x).
2116 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2118 kes When checking pid in pid file, continue running if the pid is
2119 the same as ours. This occurs on IRIX after a system crash.
2122 kes Extend new GUI API.
2123 kes Make the ua structure a class, and implement send_msg(),
2124 error_msg(), warning_msg(), and info_msg().
2126 kes Apply fix from for building wx-console on the Mac from
2128 kes Implement new select mechanism for GUI programs.
2129 kes Reorganize initialization of stackedWidgets in bat.
2131 kes Add updated nagios plugin supplied by Christian Masopust.
2133 kes More bat implementation.
2134 kes File migrate bug with Pool Occupancy using mediaid instead
2135 of jobids. Fixes bug #795.
2136 kes Fix orphaned buffers in filed backup and verify due to
2137 crypto buffers not freed during errors. Fixes bug #789.
2138 kes Extend new GUI api code to tree commands.
2139 kes Ensure that tree and dot commands check console ACLs.
2140 kes Permit marking directory with trailing slash.
2141 kes Allow 20 console connections (instead of only 10).
2143 kes Add smartctl call to bacula-sd.conf as an example of getting
2146 kes Modify jobq.c to let simultaneous restore jobs run. This may
2147 cause them to fail if they cannot get a drive.
2148 kes Add Client Connect Wait to Storage daemon to permit users to
2149 modify the time the SD waits for a FD connection.
2151 kes Correct virtual changer check which was backwards. This caused
2152 volumes to be unloaded into slots already occupied.
2154 kes Apply Command ACL filter to JobId list in restore command.
2155 kes Correct typeo in var.c patch.
2157 kes Don't let Bacula prune File or Job records for the current Job.
2158 kes Fix variable substitution pad + inc bug reported (with patch)
2161 kes Correct SQLite log table index as reported by Luca Berra.
2163 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2165 kes Begin implementing new comm signals for API.
2166 kes Fix a few places in lib/message.c where the open fd may
2168 kes Continue implementing lib/bsock.c (real class). Make jcr,
2169 who, host, and port private. There are new methods to access
2170 them for non-class use. This required touching a number of files.
2172 kes Add LANG=C to autoconf/randpass so it works with languages other
2173 than English. Fixes bug #788.
2175 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2177 You will not be able to generate Include/Exclude list any more.
2178 It will be fixed soon.
2179 If you want to use this, you can apply
2180 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2182 kes Restore of sockets created false error messages because Bacula
2183 no longer restores sockets, but the code was still trying to
2184 set the attributes on a non-existent file. Reported by a user.
2185 ebl finish RecyclePool feature
2186 Media will takes Pool.RecyclePool
2187 when moving from Scratch to a Pool or when user will do
2188 update volume=xxx frompool
2189 To use it, add RecyclePool = aPool to your Pool resource
2192 RecyclePool = Scratch
2196 kes Expand new BSOCK class adding signal() and new BNET signals.
2197 kes Begin enhancing the dot commands adding a new API function
2198 that returns more information and will make it easier
2199 to interface to the Director from a program.
2201 kes Make DEVICE fd private. Its new name is m_fd, and can be
2202 obtained with dev->fd() outside the class. This is the
2203 first of many DEVICE members to be made private.
2204 kes Implement Michael Renner's idea on having a virtual disk
2205 changer. I made some minor modifications (e.g. I did not
2206 implement the Virtual Changer directive, but simply set
2207 the Changer Command to an empty string.
2209 kes Implement a BSOCK send() method that writes the whole record
2210 in a single write() request rather than in two.
2211 ebl add update volume=xxx recyclepool=yyyy
2212 volume takes recyclepool from pool when using update volume=xxx from pool
2214 kes Fix encryption deblocking bug, which caused some restored files
2215 to be truncated. This fixes bug #763.
2216 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2217 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2219 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2220 ebl Use btime_t instead of uint64_t in media patch.
2222 kes Optimize the use of the database a bit in the Status dir command.
2223 Only open it when needed, ensure that if any previous database
2224 was opened, it is closed.
2226 kes Correct VolCatBytes bug from media patch.
2227 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2228 in the case of orphaned records.
2229 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2230 and File records in 300K chunks to be more efficient. This
2231 idea came from Juan Luis Frances (if I remember right).
2232 kes Apply Eric's scratch patch that moves a purged Volume to
2233 the RecyclePool. Question: how is RecyclePool set? what
2234 happens to the ScratchPool?
2235 kes Apply Eric's media patch that collects read/write media
2236 times as well as byte counts. This patch requires a
2237 simultaneous upgrade of the DIR and SD. Note, there
2238 should be some way to turn off timing. I'm not sure
2239 times are in Bacula units.
2240 kes Apply Eric's batch-insert patch.
2242 kes Update projects list.
2244 kes Implement Include/Exclude file lists in FD as dlists using
2245 the new dlistString class. This permits efficiently having
2246 large include/exclude lists and completes project Item 25.
2247 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2248 console is authorized to cancel the job. This fixes bug
2250 kes Modify SD so that the VolCatJobs medium record is updated
2251 at the beginning of a Job rather than the end. This
2252 fixes bug #775 where exceeding MaxVolJobs caused jobs
2254 kes Added a mutex around getting and setting Volume information
2255 so that multiple simultaneous jobs will single thread.
2257 Switch to using Subversion
2258 kes Remove src/pygtk-console/ from configure
2260 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2261 plus the entrypoints.
2262 kes Apply patch supplied that corrects debug print
2263 in canceling jobs for max run time. Supplied as
2264 part of bug #621, which was previously fixed.
2266 kes Test on job_canceled() and sd_msg_thread_done inside
2267 loop starting the message thread to avoid a race condition.
2269 kes Remove rl_catch_signal from console.c as it conflicted
2270 with the header definition. Fixes bug #765.
2271 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2273 kes Clarify some stored/acquire messages to indicate if the
2274 problem is with read or append.
2276 kes Fix memory leak with storage ids in cats/sql_get.c
2277 kes Terminate watchdog earlier to avoid reference to released
2278 memory -- reported by Jason Austin.
2279 kes Move closing the database from jobq.c to the director daemon
2280 termination routine. This fixes memory leaks for shadow jobs
2281 (i.e. migration jobs).
2282 kes Free up the unique jobid chain items in migrate.c. This fixes
2283 a memory leak problem.
2284 kes Convert some ugly looking for statements to use foreach_alist
2285 in findlib/find.c. This will facilitate converting the structures
2286 to use dlist (for large include/exclude lists).
2287 kes Fix a bug in the btree.c and btree.h routines, then rename them
2288 rblist and add them to be built in src/lib. Include some new
2289 methods written by Rudolf Cejka that make the code more readable
2290 (hides some of the ugly casting).
2291 kes Add set_next() and set_prev() methods which make the code much more
2292 readable. Also add a new dlistString class that facilitates storing
2293 strings in dlists. To be used in the large include/exclude lists.
2294 kes Make some trivial modifications to lib/tree.h that use rblist
2295 rather than dlist for storing the tree links. This was suggested
2296 by Rudolf Cejka. The result of this is that the restore tree now
2297 uses red-black binary trees rather than simple linked lists. This
2298 should give rather dramatic speed improvements for directories
2299 contining large numbers of directories/files (more than 10000).
2301 kes Fix maxruntime bug #621.
2303 ebl Implement the include JobID in spool file name project.
2304 kes Reorder projects file in order determined by Jan 2007 vote.
2305 kes Implement item #12 on project list -- quick release of FD by
2307 kes Fix open of SQLite3 db where user does not have write permission
2308 so that DIR does not crash. Fixes bug #761.
2310 kes Add back missing @ in Win32 Makefile.
2311 kes Change 'Device not configured to autolabel' from INFO
2313 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2314 which should restart an indefinite # of times.
2315 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2316 other DIR specifications.
2318 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2319 Fix path quoting in SQLite scripts.
2320 Fix problems with SHGetFolderPath.
2322 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2324 kes Fix Job restart on error bug that promotes an Inc to a Full
2325 backup. This should fix bug #755.
2326 kes Add qt-console and first cut of code.
2330 kes Fix Bacula->Documentation link on Win32 to point to index.html
2331 instead of bacula.html. Fixed bug #750.
2332 kes Return JobId in db_get_job_record() when JobId==0. This should
2334 kes Do not release source pointers when restarting a failed job.
2336 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2337 This *should* fix bug #747.
2338 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2341 kes Modify USTORE constructor to set an empty store_source string,
2342 and don't copy the store_source string in a cancel. Hopefully
2343 this will fix Arno's seg fault, bug #744.
2344 kes Add back code to disable conio in configure. Fixes bug #743.
2345 kes Correct the Options scanner in the FD to correctly handle
2346 SHA1 option, which was eating the next option. Reported by
2348 kes Add code to indicate when the SD is spooling, spool wait, and
2349 despooling as requested by Alan Brown.
2351 Version 2.0.0 released: 4 January 2007