1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
31 separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
36 kes Apply patch submitted for bug #1107 with a small modification.
37 This fixes a bug where bcopy copied too many records.
38 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
40 kes Make the default bat restore Pool be Any. This fixes bug #1118.
42 kes Remove debug statement that crashes the SD at the end of
43 a tape during restore. Fixes bug #1125.
45 kes Implement Win32 bat changes made to Branch-2.4
47 kes Tweak separator command in console to start disabled and
48 allow defining no separator character. Also make code a
49 bit more fault tolerant.
50 kes Make btraceback write the traceback to the working directory
51 before attempting to mail it.
52 kes Add a RFC to Projects.
54 kes Attempt to implement a kludge to make Qt work with bat
56 kes Setup rstorage correctly. Virtual backups are working.
58 kes Move setting JobLevel and JobType into a method, which should
59 allow completing Virtual Backups.
60 kes Fix verify jobs to work again.
62 kes Virtual Backup tweaks -- it is close to working.
64 kes Ensure that SD tried to mount a volume not in an autochanger
65 at least once before asking for operator intervention.
66 kes Make SD aware of Virtual Backup jobs.
67 kes Add VirtualFull for bat.
68 kes Changes to get read storage correct for Virtual Backup.
70 kes Remove old code from label.c
71 kes Split display_display_info() out of write_bsr_file()
72 kes do_vbackup_init() working -- i.e. bootstrap file built.
73 kes Change Bacula trademark owner from John Walker to Kern Sibbald
74 kes First non-working cut of vbackup
75 kes Correct FD heartbeat code to use volatile variable accessed by
77 kes Zero thread id with memset if on Win32 in case it is a struct.
78 kes If cannot create JobMedia record, continue to try to write eof
79 and clean up in block.c
81 kes Add code to interface OpenSSL to new Win32 pthreads code which
82 used a structure for thread_t.
84 ebl tweak bat for win32 compilation
86 ebl Remove tokyo cabinet from the source
87 ebl Update configure/autoconf to support berkeley DB
88 ebl Add a sort to db_get_file_list() to improve bsr construction time.
90 kes Add a mtx-changer.conf file that is not overwritten during
91 an upgrade. It fully configures the mtx-changer script.
92 kes Clear in-use bit on vol when unused while swapping.
94 kes Remove sleep at end of ./bacula
95 kes Clear hash packet for hardlinked files correctly. This corrects
96 a long standing bug where hardlinked files selected individually
97 would occasionally not be restored.
99 kes Apply Eric's patch to ensure that autoprune does not return
100 a Volume not in the autochanger unless requested to do so.
101 kes Correct bat restore display of multiple drives. This fixes
103 kes Do find_a_volume() each time an unload is done. This
104 fixes the failure of maxvol2-test.
106 kes Add some SD debug code.
107 kes Do find_a_volume() each time an unload is done.
108 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
109 and adds --with-db-port to ./configure.
110 kes Use Qmsg() in job.c watchdog callback.
112 kes Release main control rwlock if ABORTing.
113 kes Make watchdog connect timeout queue messages rather than sending
114 directly to avoid lock conflicts with the real thread.
115 kes Add const char in dbd.c to avoid compiler warnings.
116 kes Fix python compiler string warning. Note, IMO the GNU C++
117 compiler guys have made a *very* bad change to their compiler.
118 They now force all strings to be 'const' unless you explicitly
119 cast them, which is extremely ugly and ruins nice code as well
120 as creates a lot of useless work.
122 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
123 mt. This fixes bug #1116.
124 kes Add const in python files to reduce compiler warnings.
125 This may have to be backed out because of later compiler
127 kes Fix failure of 2drive-concurrent-test. Always read label;
128 clear_unload() only after drive is defined in acquire_for_read().
130 kes Generally clean up the manual tape loading code. The main
131 conceptual change is that when a volume is marked to be unloaded,
132 its volume name is retained, and it is only marked as unloaded
133 when either the autoloader says it is unloaded or another tape
134 is read on that drive.
136 kes Add debug code and refactor subroutine in stored/mount.c
137 kes Fix format problem in bscan output reported in bug #1105.
138 ebl Fix get_next_volume_for_append logic with autochanger
139 - use pruned volumes if found
140 - don't reset the inchanger flag after getting a recycled volume
142 Fix recycle_oldest_purged_volume to take InChanger flag in account
144 ebl Add mmap/unmmap implementation for tokyodbm under win32
146 kes Make first step toward eliminating globals from config
147 scanning. Also should be a workaround for FORTIFY_SOURCE
148 GNU C bug -- fixes bug #1042.
150 kes Apply duplicate job tests to restarted jobs.
151 kes Copy more data when restarting a job so that run
152 overrides are kept. This should fix bug #1094.
154 kes More word alignment cleanup.
155 kes Fix bug where SD did not ask operator if the device could not
156 be opened. Reported by Eric.
158 kes Add dbuser to DIR conf file (replaces user).
159 kes Add --with-db-password to ./configure
160 kes Fix regress to handle db_password.
161 ebl Add new "status storage slots" that list autochanger
163 ebl Update vtape driver to compile only under Linux.
164 ebl Fix a bug when restoring with a wrong mediatype.
166 kes Eliminate ints from conf files and structures to avoid
167 word alignment problems
169 kes Fix bug reported by Scott Barninger where the bacula script
170 refers to scripts in the wrong directory. Needed to meet the
171 requirements of recent FHS location changes.
172 ebl Disable vtape for FreeBSD.
174 ebl Modify disk-changer to check if slot contains something before
177 ebl Fix vtape on win32 and debian.
178 ebl Fix autoselect patch (cause segfault).
180 ebl Fix autoselect option broken for a while. Fix #1089. Need some
181 work with StorageId to be able to use a particular drive in a
184 ebl Rename vtape to vtape.
185 ebl Update vtape driver.
187 ebl Modify vtape driver to avoid sparse file.
188 kes Add make clean of qt-source directory during ./configure
189 kes Store last block number written to tape in DEVICE and
190 use it for testing for correct last block on EOT.
192 Release Version 2.4.0:
196 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
197 This fixes bug #1095.
199 kes Add create_postgresql_database.sql to Win32 installer. Should
200 fix problem reported by Juilio Monteiro.
201 kes Get correct slot when auto unloading a device. This fixes bug
204 kes Fix multiple media restore.
205 kes Make DEVICE Slot private and access it via a method.
206 Allows better control over when it is set and cleared.
207 kes Fix possible seg fault if SQL error.
209 kes Add Martin's fixes to argument scanning for the estimate
210 command. This fixes bug #1093.
211 kes Add debug code to SD.
212 kes Fix renaming a Volume, which used the wrong Volume name.
214 kes If operator has rewind tape, print warning, release tape and
215 try once more. If tape is positioned somewhere, something went
216 wrong, so mark the tape in error and try once more. Previously
217 this error was fatal, now it produces an error message.
218 kes Ensure correct volume name displayed during restore
219 kes Ensure that Volume is mounted for restore.
221 kes Fix a few more Coverity reported problems.
223 kes Apply Allan Black's status dir job count patch.
224 ebl Add information about IMPORT/EXPORT slots in mtx-script.
225 kes Enhance a couple of SD debug messages.
226 kes Tweak unload flag setting and ensure it is set during swap.
228 ebl Fix #1091 about bad output in estimate command.
230 kes Modify autochanger locking to attempt to avoid race
232 kes Make sure device not busy before doing label command.
233 kes Display open() errors except when polling. Previously too
234 many were suppressed. This should fix bug #1070.
235 kes Fix Win32 reparse points. Bacula will not recurse into any
236 reparse point directory, including mount points, unless the
237 directory is explicitly mentioned at the top level (same as
238 with Unix). A file that is linked to another file will be
239 backed up -- much as Unix does for hardlinked files.
240 This fixes bug #1041.
242 kes Remove double quotes from ChangeLog and ReleaseNotes
243 kes Remove StorageId test when pruning and recycling (Eric's changes).
244 kes Remove old form of locking when getting volumes -- causes deadlock.
245 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
246 the name unique and to eliminate compile time error.
247 kes Add accurate.o to Win32 FD Makefile
249 kes Fix cats dll build on Win32 after db_update_job_end_record
250 calling sequence change.
251 ebl Switch to tokyo dbm instead of htable in accurate code
252 ebl Include tokyo dbm to bacula source tree
254 kes Fix buffer overruns detected by Coverity.
256 kes Tweak joblog display.
258 kes Implement --without-qwt
259 kes Fix layout of restore tree dialog
260 kes Add configure bat QWT libraries, so that bat can be built
261 with or without the QWT libaries.
263 ebl Add dummy tape driver for regression tests.
264 kes Make sure we unload the right slot when swapping.
266 kes Add debug times, reduce size of two-pool-changer test
268 ebl Tweak autoconf scripts for vtape
270 kes Improve SD reserve debug code.
271 kes Testing an improvement to free up volumes no longer in use.
273 kes Rework SD acquire for read to handle autochanger Volume
275 kes Implement regression that explicitly tests swapping a Volume
276 from one drive to another.
277 kes Enhance disk-changer to detect most error conditions.
278 kes Fix SD code so that it properly swaps a Volume between drives.
279 This fixes bug #1083.
281 kes Apply libdbi patch from Joao Freitas for regress and for
282 Bacula trunk. Regress now works with libdbi. Nice.
283 kes Apply .nobackup patch from bug #1077 submitted by
285 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
286 name into jobs cloned via the run directive.
288 kes Prevent a Volume that is being swapped from being freed from
289 the volume list. This will most likely fix, at least partially,
291 kes Fix strippath so that it does not get a buffer overrun and crash FD.
292 This fixes bug #1078.
293 kes Remove 50 millisec wait in SD that broke debugger.
294 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
295 that a job may run, counted from when the job was scheduled.
296 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
297 a job may block waiting for a resource, counted from when the job starts
298 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
299 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
300 that implements multiple commands per line in the console when using
301 readline. Modify the default to use a semicolon as the command separator.
303 ebl Fix SQL query in migration code.
304 ebl Make accurate mode with hash disk pass regression tests
306 ebl Implement first cut of accurate backup with hash disk.
308 kes Force unload of volume when wrong volume mounted in SD.
310 kes Fix bat seg fault at termination.
311 kes Add Bacula generated version to bat about box.
314 kes Experiment with allowing multiple read jobs.
315 kes Move final volume swapping code to DCR method and
316 call it from acquire_for_read().
317 kes When wrong volume is mounted during read, unload_autochanger.
319 kes Integrate the libdbi changes from Joao Henrique Freitas
321 kes Stop searching for Volumes in SD askdir if DIR returns the
322 same volume name twice in a row.
323 kes Close bat console windows first to eliminate error message
326 kes Tweak the swap Volume from one drive to another code so that
327 it now seems to work.
328 kes Resolve several problems with recycling that broke the new
329 code (these problems are in 2.2.9 as well).
330 kes Remove the volume lock when calling the sysop code.
331 kes Don't mark a reserved volume with no writers as unused otherwise
334 kes Rework class structures for VOLRES, DCR, and DEVICE to make
335 the method names a bit more logical, and for more logically
336 handling the responsibilities.
338 kes Remove redundant code in terminating the scheduler that just
339 causes a seg fault in many cases.
340 kes Cleanup releasing a volume and make it a DCR method.
341 kes Improve algorithm for detecting pre-reserved volume and
344 kes Tweak volume swapping code so it works.
345 kes Correct name overloading in mount.c
346 kes Replace released flag in VOLRES with reserved and add access
347 methods for the VOLRES class.
348 kes Prevent volume from being released while being swapped.
349 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
351 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
353 kes Refactor parts of stored/mount.c
355 ebl Add sanity checks for VolWriteTime and VolReadTime
356 ebl Take care of bad clock changes while computing VolWriteTime
357 and VolReadTime. This should fix or limit #1066
358 kes Correct error string numbers in dird/catreq.c
359 kes Restructure reserving, acquiring, and mounting volumes. Calls to
360 autochanger are deferred for mount.c -- simplifes the code.
362 kes Do not prune any running job. It just fails the job.
363 kes Lock the volumes when changing dev->reserved_device and marking
364 the volume unused otherwise the device can get reserved by
365 another job before the volume is released, thus blocking it.
367 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
368 kes Fix bug #1063, reuse of freed ptr in list nextvol.
369 kes Release regex compile buffer in filed/job.c
370 kes Add proper type of const char in sql_create.c
371 kes Turn off debug in daemon termination routines
372 kes Move free_volume_list() before devices are freed in stored.c
373 kes Fix reference to uninitalized stack variables in bregex.c.
374 This should correct bug #1067.
376 kes Fix possible seg fault in SD when freeing a volume entry.
378 kes Implement unload_dev() before swap device.
379 ebl Add statistics prunning with option and menu
380 kes Separate unload_dev() from unload_other_device() in autochanger.c
382 kes Apply patch from bug #1069 that corrects spurious error messages
383 when ACLs enabled on SGI but no ACL exists.
384 ebl Fix small segfault in bacula-sd when debug level is 500
385 kes Modify run_program() and run_program_full_output() to use
386 call by reference for the results string. This corrects a long
387 standing problem where the address of the string may be changed
388 in the subroutine but not in the calling program.
390 kes Re-enable code to remember last volume mounted on a non-tape
392 kes Add patch supplied in bug #1068 that fixes a SD crash when using
393 a Virtual autochanger.
394 kes Generate correct JobMedia records during spooling/despooling when
395 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
396 <tih@hamartun.priv.no> for excellent analysis and testing.
398 kes Tweak hash algorithm for htable using Martin Simmons idea
399 for doing a circular shift.
400 kes Remember what volume is in VTLs (previously turned off for
402 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
403 pointed out some problems in creating JobMedia records during
404 spooling with concurrent jobs. Fix the problem by updating the
405 start file position before despooling and generate a jobmedia
406 record at the end of despooling.
408 kes Fix handling of JobMedia records during spooling and when a
409 Volume is changed without actually writing data to the Volume.
411 kes Rework certain SD locking based on gdb tracebacks of deadlocks
412 sent by Eric. This code now uses only the volume_lock() rather
413 than the reservations lock when at EOM and acquiring a new
415 kes Ensure only one exit point in several subroutines.
417 kes Implement bsock code to permit locking. Use the new code in Verify
418 in the FD to prevent the heartbeat thread from disrupting the Verify
419 data sent to the Dir.
420 kes Modify SD locking to eliminate locking the reservations system from
421 outside the system. Use the volume lock when getting media data
422 and reserving a new volume at end of media.
423 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
424 when SD starts are not locked into place.
426 kes Fix error compiling runscript code on 64 bit machines.
427 kes Tweak Win32 mount point code.
428 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
429 cleared giving bad file estimate).
430 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
433 kes Keep Schedule run lists in order as suggested by
436 kes Implement autostart scripts for Debian.
437 ebl Implement upgrade catalog scripts.
439 ebl Apply jobstat patch for long term statistics. Have to implement
440 purge stats command and upgrade scripts.
441 kes Fix mtx-changer.in for broken Debian mt program.
443 kes Fix large number of JobMedia records reported by Eric Bollengier.
445 kes Apply doc fix from bug #1062.
446 kes Resolve crash and improper restore wx-console Win32 restore
447 GUI. Fixes bug #1065.
448 kes Update Win32 wxWidgets to latest version.
449 kes Attempt to do correct handling of Win32 mount points. Should
451 kes Fix Win32 FD backup/restore memory leak due to improper termination
452 of BackupRead/Write. This fixes bug# 1038.
454 ebl Reduce memory usage for accurate backup, working only with ctime
455 and mtime. (not all Lstat field)
456 About 40MB for my Linux system (400.000 files)
458 kes Add dcr->reserved_volume flag that allows us to release a volume
459 even if it is not vol->released. This allows maxvol2 to work when
460 Volumes expire and we are already writing to the device (i.e. a
461 volume is pulled out from under us by another job terminating after
462 we reserve the drive).
464 ebl Permit multiple command/console per runscript definition.
465 RunScript { command = /bin/true ; command = /bin/false ... }
466 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
467 (restart an application) just after the VSS snapshot on windows.
468 kes Don't zap dcr values during release_volume() as they might
469 have the next Volume to be mounted.
470 kes Fix AIX prototype.
472 kes Second cut of drive switching during backup.
475 kes Update Win32 version of wxWidgets to most recent version.
476 kes Tweak Copy job details.
477 kes Rework dir_find_next_appendable_volume to make a bit more effort
478 to find a suitable volume before giving up.
480 kes Make ask_sysop_to_create... to return if waken from wait.
481 This helps get out of blocked conditions.
482 kes Experimental implementation of switch_device in reservations.
483 kes Implement FD version to allow easier protocol changes.
484 kes Add Plugin Options string -- not yet passed to FD.
485 kes Implement PluginOptions ACL.
487 kes Attempt to correct problems with restores with autochangers and
488 use counts going negative
489 kes Rework SD status command and implement API for bat. Implements
490 header, runing waitreservation, devices, volumes, spooling,
491 and terminated status keywords.
492 .status storage=xxx <keyword>
493 kes Clarify TLS error message by adding double quotes around name.
494 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
495 kes Pass jcr to tls routines so debug messages can be handled better.
496 kes Rework jobq resource allocation code, and possibly fix a bug
497 that caused reference counts to get out of sync.
499 kes Rename fd/dir plugin to use Bacula standard underscore.
500 kes Plugin work -- bring dir up to fd level.
501 kes Start implementation of VTL code
502 kes Fix Win32 build after adding new cats subroutine.
504 kes First cut at Duplicate Job implementation.
506 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
507 kes Start PluginOptions string, and refactor a bit of ua_run.c
508 ebl Apply Allan patch that permit to reset recyclepool.
510 kes Test patch -- possible fix or improvement for bug #1053
511 kes Refactor FD and SD status commands to permit new API code in
512 SD, and to fix Win32 build.
513 kes Win32 build is now working.
515 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
516 some ideas in patch from Scott Bailey.
517 kes Begin implementation of duplicate Job control.
518 kes Fix some of Win32 build after recent additions.
519 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
520 which causes the FD to detect whether or not the OS has the
521 honor no dump bit (*BSD systems), and if so, to skip backing up
522 any file with this bit set. The feature is enabled by setting
523 'honor no dump flag = yes' in the Options section of a FileSet.
525 kes Correct po warning message with datarootdir
526 kes Implement more code in dird.c to put configuration parsing in
527 a class rather than use globals.
528 kes Restructure SD status command for implementation of bat API
531 kes Suppress incorrect 'Will not descend from x into y' messages.
532 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
533 daemon globals used by parser.
534 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
536 kes Fix free of plugin_list when none exists.
538 ebl Apply accurate project patch.
540 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
541 on non-mempool object)
542 kes First cut of converting FD .status to work with bat API.
544 .status client=XXX header
545 .status client=XXX running
546 .status client=XXX terminated
547 kes Implement first cut of Copy Job.
548 kes Implement Catalog in Pool resource. It overrides catalog specified
549 in the Client resource.
551 kes Apply patch (with some difficulties) from Joao Henrique Freitas
552 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
554 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
555 ftruncate() actually works. In the case of some (cheap) NAS devices,
556 it does not, and so recycling NAS Volumes does not work. The code
557 simply unlink()s the file, then recreates it. This fixes bug #1011.
559 kes First incomplete cut of big malloc blocks for htable.
560 kes Tweak plugin code.
562 kes Plugin debug code + tweak a couple bat dialog layouts
564 kes Fix creating first JobMedia record during Migration to include
565 proper index. This caused slow restores of migrated jobs.
566 kes Temp fix to plugin name file_index.
567 kes Bacula backed up and restored a MySQL database.
569 kes Implement plugin restore.
570 kes Implement parsing of db_driver to give db_type index.
572 kes First cut of plugin restore code.
573 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
574 and do not strip paths on symbolic links.
575 kes Set catalog backup database and user name from values specified on
576 the ./configure line.
577 ebl Fix #1031 about wrong pool source information in job report.
580 kes Remove a redundant jcr argument to find_files, match_files, and
582 kes Implement '.status dir header|scheduled|running|terminated' that
583 prints the requested status section. With the exception of the
584 header, the other reports have fields separated by tabs (\t).
586 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
587 a resource embedded run command to find a since time if no explicit
588 since time was supplied on the command line.
589 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
590 that updates the state file at job termination time in addition to
591 when the daemon terminates.
593 kes First version where a plugin did a backup.
594 bpipe-fd.so created a backup file, wrote a test
595 string to it, and Bacua could restore this fabricated file.
597 kes Implement DB Driver = string for the DBI driver.
598 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
599 kes First cut of code for loading Win32 plugin dlls. Implement
600 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
601 and implement a dlfcn.h file based on opengroup's definitions of
604 kes First cut plugin directives.
606 kes Apply patch from bug #1049 to prevent stripping the path on a
608 kes Attempt to fix bug #1047 where stripping a path corrupts the
609 heap. Waiting for feedback.
610 kes Correct the Mount message not to suggest labeling a new tape
611 when doing a restore. Submitted by email by John Stoffel.
612 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
613 FD by using casting. Reported in bug #1042.
615 kes A bit of crypto cleanup. More later.
617 Release Version 2.2.8
619 kes Apply patch from Martin to correct bug #1040, bscan sets existing
621 kes Fixed important spelling error in doc -- bug #1045.
623 ebl Fix bextract to be able to extract non-portable Win32 data to
625 kes Move initialization of read/write res lock earlier in the code.
626 This fixes the crash with a null conf file. This fixes bug
628 kes Redefine CURES in lib/parse_conf to be URES and move it all
629 into lib/parse_conf.c -- this responds to bug #1042, but does
630 not fix it. The fix is not to compile with FORTIFY_SOURCE.
631 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
632 the trunk SVN. I don't think this was reported as a bug.
634 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
636 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
638 kes Add DataDespooling and DataCommitting status (committing is
639 the last despooling).
640 kes Finish implementation of new reservations code noted below.
642 kes Fix bsnprintf for float point numbers. I broke recently when
643 parameterizing some variables. This fixes bug #1036.
644 kes Undo recent reservations changes ... will apply them later
645 when they work better.
647 ebl Fixes #1034 which cause mysql to hang the connection after 8h
648 ebl Change default statistics target of filename.name and path.path
649 fields for PostgreSQL. This speeds lookup by indexes. Thanks
651 kes A few more tweaks to new reservation code. Make sure to clear
652 vol released flag when retaking volume. When reading label and
653 label is bad mark volume unused. When recycling, mark volume
654 unused so it can be renamed.
656 kes Fix reserve_volume() so it doesn't release a volume in use
657 (i.e. a volume entry not marked released). This should be
658 the last part needed to fix bug #1018.
660 kes Move Heartbeat documentation from Job to Director resource.
661 This fixes bug #1033.
663 kes Fix existing switch drive SD code to call autochanger to release
664 any old volume. This must be done to keep the autochanger from
665 releasing subsequently newly reserved volumes in doing a close().
666 This should fix bug #1018.
667 kes Fail if attempting to get console input in batch mode. This
668 should help fail RunScript console commands that are incomplete.
669 kes First cut implementing switch_drive() in SD (not actually called).
671 kes Implement first cut running console commands in a RunScript.
673 ebl Fixes bug #1028 where 'Selection Type' option was not usable
675 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
678 Release Version 2.2.7
680 kes Add new free_tls() entry point so that Win32 builds.
681 kes Fix compile warning in src/lib/util.c
682 kes Fix entry point for edit_job_codes() so that Win32 builds.
683 kes Fix seg fault Frank Sweetser reports in regression testing
684 on his systems. The problem was that the original author of
685 bsnprintf.c did not take into account the side effects of
686 using ++x in the argument to a #define.
687 kes Make SD protocol backward compatible with version 2.2.x.
689 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
690 because Bacula no longer restores sockets.
691 ebl Always use ignorecase fileset option on win32 FD.
693 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
694 that implements double quoting include names in conf files,
695 and also allows piping input by having the first character
696 be a vertical bar (|).
697 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
698 that implement %f in RunScripts to pass the FileSet name.
699 kes Skip leading | when lex input comes from a pipe as suggested
700 by Michael Stapelberg <michael@stapelberg.de>.
702 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
703 Nerijus Baliunas <nerijus@users.sourceforge.net>
705 kes Implement Plugin Directory and plugin events.
707 kes Implement a security enhancement: TLS authentication but no
708 encryption. Enabled by setting 'TLS Authentication = yes'.
709 Note when this is on, TLS encryption is turned OFF!
711 kes This patch corrects a problem where the maximum concurrent storage
712 jobs counter gets out of sync during restore jobs causing jobs to
713 'wait on max Storage jobs'. This patch fixes bug #1009.
715 kes This patch fixes bcopy so that it produces correct Volumes.
717 kes This patch eliminates spurious output to the console during a VerifyVolume
718 job that contains encrypted data. It fixes bug #1024.
720 kes This patch prevents the 'status dir' command from trying to use a scratch
721 volume and possibly moving it from one pool to another. This patch fixes
724 kes Add new include to postgresql.c suggested by Marc Cousins so
725 that it compiles correctly with pgre version 8.3.
727 kes Fix --archivedir addition to configure. Replace it with
728 --with-archivedir in configure.in This fixes the regression
730 kes This patch fixes bug #1012 where the job is canceled because
731 of Max Run Time exceeded when the job has not yet started.
733 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
734 one 'part' to write. Instead of each part being stored on disk,
735 written to DVD, then deleted from disk, all parts are written to disk,
736 and only the last is written and deleted from disk.
737 kes This patch fixes the status command to include the formating string for
738 JS_AttrInsterting. It fixes bug #1021.
739 kes This patch should fix the Mac OS X build problem on the latest
740 Darwin, where sys/types.h was not included correctly (apparently
741 due to a change in the Mac headers). The solution was to explicitly
742 ensure that it is defined for the ./configure.
743 This patch also has a rebuild of configure that includes the Debian
744 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
745 kes This patch should ensure that queued messages to the console are
746 displayed as soon as possible. It should fix bug 1007, but has been
747 reported not to work.
749 kes This patch fixes the infinite loop when trying to increase the
750 maximum number of volumes in a Pool during the add command.
751 This patch fixes bug #1008.
753 Release Version 2.2.6
755 db Remove extra data on estimate command in joblist for bat.
757 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
758 really change anything, but is the beginning of doing it *right*.
759 To do it completely right the LastWritten date must be passed to
760 the SD, but it is not yet done.
761 kes Minor tweaks to some bat restore SQL.
762 kes This patch fixes bug #1003 where putting the message output from
763 a Verify job into the catalog results in a recursive loop. The problem
764 seems to show up only with postgresql (to be verified).
765 kes Correct %x to %p in postgresql debug statement.
767 kes Fix bug #942 where lots of emails where generated when the heartbeat
768 interval was low and Bacula wanted a different tape from the one in
771 ebl Add new SD despooling attributes and Dir inserting attributes
772 job status codes in the catalog (Status table).
774 ebl Use qmake-qt4 instead of qmake when available (debian system).
776 kes Add a security warning to src/cats/make_catalog_backup.in indicating
777 that passing the password via the command line (arg 3) is insecure.
778 This responds to bug #990 (it doesn't fix it).
780 kes Set default debug_level to zero. This corrects bugs #991 and #993.
781 kes Fix a crash in bat when it cannot connect to the Director for example
782 if the Director is not running.
783 kes Remove redundant INDEX (JobId) from File table in the trunk.
785 kes Make explicit exception to GPL in LICENSE to permit linking
786 the Win32 FD with Microsoft VSS code.
787 kes Apply the Solaris package patch from
788 Masopust, Christian <christian.masopust@siemens.com>
789 kes Apply the patch to optionally add a timestamp in the debug output
790 submitted by Mariusz Czulada <manieq@wp.eu>.
792 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
793 backend (sql_strerror). Fixes bug #989
795 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
796 It applied with no problems.
797 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
799 kes Redirect stderror to stdin on mt status command in mtx-changer.in
800 since the status is returned on stderr on Solaris.
801 kes Activate Close button on tray-monitor window. This fixes
803 kes Check for NULL item in parse_conf.c before calling it. In the
804 case of Device, there is no item and this caused a seg fault when
805 Device appears in the conf file.
806 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
807 avoids pulling in config.h multiple times in some new code.
809 kes Fix spurious warning message printed when creating a volume with
810 a LabelFormat. This fixes bug #976.
812 Release Version 2.2.5
814 kes Add JobId in place of Job name in all the Jmsg() output.
815 kes Correct the APP_DESC for the Win32 storage service (remove an e).
817 kes Make maxvol-test and new more strict maxvol2-test work.
818 kes Print JobId in all Jmsg() job output.
820 kes Add new SD despooling attributes and Dir inserting attributes
821 job status codes. This fixes bug 961.
822 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
824 kes Fix doc issue. This fixes bug #963.
825 kes Fix listing performance problems in bat. Pointed out by
827 kes Remove old debug code.
828 kes Fix bat code that tests for Win32. This should fix bug #968
829 kes Query 5 list wrong Vol after migration. This fixes bug #960
831 ebl Fix #969 where user can't change Replace option in restore menu.
833 kes Save jcr in thread specific data (tsd) for each thread.
834 kes Make Dmsg() print JobId as -%u.
835 kes Make Jmsg, Emsg, and others automatically pickup the jobid
836 for the thread if it exists.
837 kes Remove old reservation debug jid code.
838 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
839 ebl Add an option that permit to specify spool size in job
840 definition. (Applying patches/testing/spoolsize_per_job.patch).
841 You must upgrade SD and DIR at the same time.
842 dvl Add new configuration item --archivedir
843 dvl Adjust regression tests to use tmp not /tmp. This will allow
844 multiple concurrent runs of the regression tests.
846 kes Fix race condition that drops final block written to volume.
847 This happens in rare cases with multiple simultaneous jobs
848 when the Volume fills. This fixes bug #964. May be related
849 to bug #935 and possibly #903.
850 kes Eliminate more strerror() and replace with bstrerror().
851 kes Remove BSD getopt and replace with unrestricted IBM version.
852 kes Fix Win32 build for changed calling sequences.
853 kes More tweaks to the mount volume routines to get everything
854 right. Changed variable name from find to have_vol, which is
855 much easier to understand.
856 kes Enhance btimer debug code.
858 kes Fix FD->SD authorization failure, which was due to spurious
859 wakeups from a pthread_cond_timedwait(). Simply check the
860 predicate before continuing. This fixes bug #953.
861 kes Add const char where needed (more to do). Remove temp debug code.
863 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
864 kes Don't overwrite error message in check_tables_version.
866 kes Unlock batch insert tables with same calls used elsewhere.
867 kes Allow starting 59 jobs a second.
868 kes Make SD session key more random.
869 kes Add retry for SQLite opening db if it fails. Probably helps
871 kes Suppress extra error messages during batch insert failure.
873 kes Add jcr to timer packets so if killed message can be sent to job.
874 kes Add JobId to all Dmsg() output.
875 kes Put some FD auth code on dbglvl rather than fixed.
876 kes Return insert attributes error message in db msg buffer to avoid
877 false error messages. Helps fix bug #966.
878 kes Separate batch init error messages. Probably helps fix bug #966.
879 kes Make SD code that contructs attribute insert check string lengths
881 kes If Dir gets an error during inserting attributes, cancel SD.
882 This reduces unnecessary error messages.
884 kes Correct search boolean for getting Volume info
885 ebl Cleanup batch insert code. Probably fixes bug #965.
886 kes Back out one small change to the reservation system (reserving a volume).
887 kes Rework how a Volume is mounted. It is now much more intelligent and
888 will always attempt to use any mounted volume if possible and reduces
889 calls to the Director asking about volumes.
891 kes Turn off some code when batch insert not enabled.
892 kes Edit FD name in connect error messages.
893 kes Rework the reservation system to take into account that the Director
894 might give us a Volume that is different from the current one being
895 used, and to ensure that we don't exceed Maximum Volume Jobs.
896 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
897 fatal error with multiple jobs running'
898 kes Add more debug code in reservation system.
899 kes Implement maxvol-test to check bug #947.
901 kes Add code to handle tray monitor separated from Win32 FD.
902 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
904 kes Add missed return in fixing verify bug -- trunk only.
905 ebl Fix a command parser issue causing a director segfault.
906 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
908 kes Increase the max block size to 4MB fixes bug #957.
909 kes ERABT if user sets min block size > max block size. Fixes bug #956.
910 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
911 is not properly mounted (recognized) during a poll.
912 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
913 Job that has differences reports Verify OK.
914 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
916 ebl Add an option to operate on all pools with update vol parameters.
917 This complete the project 20. Patch from Nigel Stepp.
918 ebl Add history support to bconsole when using readline.
919 Using Ctrl-D to exit doesn't update .bconsole_history
920 kes Modify new volume algorithm to use max MediaId for generating next
921 volume number rather than the count of Volumes. This should essentially
922 eliminate the failure rate if some volumes were deleted. Bug #921.
923 kes Begin implemention of Optimize Job Scheduling.
924 kes Implement restore callback that Dirk and I agreed on for bat
925 restore. This fixes bug #928. Restore of backup of zero files fails.
926 kes Fix SQL Catalog logging which broke with new db_escape_string
929 Release Version 2.2.4
931 kes Fix bacula_cats.def for new db_escape_string().
932 kes Increase size of name string when FD making connection to SD.
933 May fix bug #953. FD->SD connection failure.
935 kes Add code to help Dan debug 2drive-incremental-2disk test.
936 kes Add code to try to fix bug #908.
937 kes Add waits to multiple exit detection code to try to force pid
938 file to always be deleted.
939 kes Restore good dev.tar.gz to rescue set appropriate binary property.
941 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
942 trying to switch drives by checking for blocking before unblocking.
944 kes Cancel storage daemon in all cases where FD reports error. This
945 should fix virtually all cases of bug #920.
946 kes Fix db_escape_string() for MySQL which did not compile.
948 kes Fix error message that was clobbered when Dir tells SD it does not
949 have write permission on Volume. This should fix a minor point
950 in bug #942, but not the main problem.
951 kes Add code to cancel job in SD if FD connection fails. This should
953 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
954 dvl Pass jcr and db into db_escape_string() to enable better escaping
956 kes Fix migration code to get correct Volume name with multiple volumes
957 by skipping |. Fixes bug #936.
958 kes Implement patch supplied by Landon to fix bug #944 where using
959 TLS with bconsole uses 99+% of the CPU.
960 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
962 kes Move patches into patches directory.
964 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
967 ebl Using 'm' in bconsole will show messages like before,
968 and not memory usage.
969 kes Fix bug #935, and probably also bug #903 where files were not
970 restored. MediaId was not properly set in JobMedia record after
973 kes Suppress chown and chmod error messages if the FD is not running
976 kes Apply Martin Simmons' patch that should turn off the new API usage
977 when batch insert is turned off allowing building on older
979 kes Add ./configure search in qwt-qt4 for qwt package
981 kes Bacula is now free of 3rd party GPL copyrighted code!
983 kes Add guid_to_name.c/h which replace idcache.
984 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
986 ebl Detect if new PosgreSQL batch insert API is present.
987 kes Correct incorrect mempool call causing Director crash. Occurs on
988 systems without va_copy().
989 sb Update spec files for 2.2.1 release
991 kes Fix memory pool call in ua_output.c. bug #934.
992 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
993 Add test program to fnmatch.c
995 kes Integrate patch to README.vc8 from
996 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
997 edit it to get it into Unix patch format.
998 kes Implement mkpath.c to replace old FSF makepath.c
1000 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1002 Release Version 2.2.1
1004 kes Update POTFILES.in
1005 kes Cleanup a few underquoted AC_DEFUNs in configure
1006 kes Apply patch from Martin Simmons that adds a test for va_copy to
1009 kes Fix bug #921 by increasing the number of tries to create a new volume
1011 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1012 can be called multiple times. Implement a version for machines
1013 without va_copy() that gets a big buffer.
1015 kes Integrate more portable zone offset code into bsmtp.c
1016 Submitted by Attila Fülöp.
1018 kes Fix bad SD->FD return status reported by
1019 (James Harper) <james.harper@bendigoit.com.au>
1020 ebl Fix a bug in read_close_session which return random status
1021 thanks to James Harper
1023 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1024 and directory names during restore of single file/directories.
1025 kes Add sanity checks to .sql command when string is empty. Hopefully
1026 that will resolve Dirks Director crash.
1028 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1029 in the bsmtp chat subroutine when debug is >= 10.
1031 kes Fix Director crash when running bat SQL queries.
1032 kes Add David's notes on Item 8: Copy pools.
1034 kes Rework projects file to be current and ready for a vote.
1035 kes Enhance lex scanner error message.
1037 kes Tweak LICENSE file to mention BSD code.
1038 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1039 if specified on the ./configure.
1040 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1041 This class is intended to allow us to open a second bsock to the
1042 Director while in the restore subdialog.
1044 kes Fix configure to create bat Makefile before creating dependencies.
1045 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1046 kes Add a tooltip to the tray monitor.
1047 dvl Set the Director's PID file before dropping privs. This fixes
1050 kes Update AUTHORs file
1051 kes Increase the default max concurrent jobs to 20 in FD and SD to
1052 correspond with the default .conf files.
1053 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1054 some different, of the same file created by RN when porting the
1056 kes Rearrange some of the Win32 directories and the placement of the files
1058 kes Set DEVELOPER flag in version.h
1060 ========================================================================
1061 Release Version 2.2.0
1063 kes Apply a second doc patch from Marc.
1064 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1065 improves the tips section that discusses how to setup multiple
1068 kes Update bat README file.
1069 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1070 corrects a typo in the Recycle status check in db_find_next_volume().
1071 This will probably fix a number of annoying problems with multiple
1073 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1074 bnet calls -- no functionality change.
1076 kes Modify the Verify output to specify if files are missing on
1077 the Volume(s) or disk. Fixes confusion in bug #916.
1078 kes When more than one Volume is read in a migration job, the last
1079 Volume bytes reported are from the last read volume rather than
1080 the last written volume. Fixed. This fixes bug #910.
1081 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1082 It previously printed New Recyle flag is: no. This fixes bug
1085 kes Correct seg fault when switching tape drives during restore.
1086 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1087 be used until after 2.2.0 release.
1089 kes Remove fnmatch() in SD that permitted wild card specifications.
1090 This fixes bug #914.
1092 kes Fix %g in filename returned by SQL for browse tree reported by
1094 kes Fix configure so that it puts config.out in the cwd rather than
1096 kes Attempt to fix the locking problem reported by Eric in bug #906.
1097 kes Make berrno class to leave errno unchanged after constructor call.
1098 kes Make bnet_server use the heap rather than the stack to allocate
1099 its socket fd pointers to avoid a crash at termination. Problem
1100 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1102 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1103 and putting it in depkgs-qt along with Qt4.3.
1105 kes Rework code in acquire.c that switches drives for reading when
1106 the Media Type does not match. This should fix bug #906
1108 ebl Fix a director segfault during job setup #907
1109 kes Correct seg fault in postgresql when first operation returns no
1110 rows. Fixes Dirks File browser problem seg fault with bat.
1112 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1113 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1116 kes Implement PopUp YES/NO dialog for bat.
1118 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1120 kes Correct RunScript to terminate job in FD on failure.
1121 kes Change abort_on_error and AbortJobOnError to fail_on_error
1122 and FailJobOnError in RunScripts.
1123 kes Minor tweaks of code formating in RunScripts, principally to
1124 avoid depassing 80 columns.
1126 kes Eliminate one #ifdef Win32 in bsmtp
1127 kes Implement grow tool to grow a file for testing very large databases.
1128 kes Add big-vol-test to test Bacula seeking with > 5GB.
1131 kes Modify find_next_volume() to return all values in Media record.
1132 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1136 kes Update Release notes
1138 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1139 Warning, in previous beta version, all media get from scratch keep their
1142 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1143 This should fix bug #842. Made a note to look at removing the temp
1144 files at the end of the install.
1145 kes Add ability to mount and unmount a file device providing it is
1146 marked as being removable and has the appropriate mount and unmount
1147 commands defined in the Device resource. This fixes bug #830.
1148 kes When applying a storage override, release all previous storage
1149 definitions rather than just prepending the new storage.
1150 This should prevent a good deal of confusion.
1152 kes Implement ./configure search for qwt libraries.
1154 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1155 Win32 FD. This should fix bug #893.
1156 kes Remove an unnecessary beep in Win32 init code.
1157 kes Update copyright dates in Win32 executable about boxes.
1158 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1159 code with a BSD getopt.c and getopt.h.
1160 kes Remove sched.h from the Win32 compat directory -- not used.
1161 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1162 need to shut it down, do it through the services panel or the command
1164 kes Remove some inappropriate Bacula FSFE copyrights.
1165 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1166 kes Fix regress config non-portable test as pointed out by
1167 Florian Heigl <florian.heigl@gmail.com>
1168 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1169 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1171 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1172 Reported by Frank Sweetser.
1176 kes Fix client-only build.
1177 kes Integrate client-only fixes for bsys (initgroups) and conio from
1178 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1179 kes Make arguments to get_scratch_volume() in same order as other
1181 kes Rework the prune_volumes() subroutine so that after purging and
1182 no volume found in desired pool, it will check for a scratch
1183 volume. This prevents recycling the whole scratch pool.
1184 kes Add code to status storage to print boffset_t (largefile support).
1186 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1187 kes You now need a --with-qwt=<dir> to be able to build bat.
1188 kes Update src/win32/cats/bacula_cats.def to include the new
1189 db_get_query_dbids() call on Win32.
1191 kes Correct a problem when selecting a scratch volume and moving
1192 it to another pool that lost some columns.
1193 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1194 kes Enhance Autochanger error messages to include Volume and device name.
1195 kes Rework prune_volumes() code to take account of InChanger flag,
1196 and to handle recycling volumes going to the Scratch pool and
1197 current pool because the RecyclePool directive.
1198 kes Implement a better and more efficient db_get_query_dbids() to
1199 handle creating and passing back a list of DBIds.
1203 kes Start work on new more efficient DBId subroutine. First use
1204 will be for recycling volume to Scratch inchanger.
1205 kes Increase number of JobIds in pruning from 1000 to 10000.
1206 This to be replaced by above routine.
1207 kes Begin implementation of building Qt4 on Win32.
1208 kes Correct typo in fix I added for bad TLS shutdown.
1209 kes Pull 2.0.3 patches into patches directory.
1210 kes Update Release notes. Include qt-console in line count.
1211 kes Update Projects file.
1213 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1214 bug in migration code where a job that spanned two volumes
1217 kes Implement new BST_DESPOOLING blocked state. Change from locking
1218 during despooling in SD to blocking. This means that other threads
1219 can work with the device structure, in particular the reservations
1220 system while despooling.
1222 kes Fix return in reservation message queue that missed clearing
1223 the jcr lock (implemented 26Jun07 below).
1224 kes Rename a number of dev methods to make locking function names
1226 kes Document locking in lock.c. Move lock structures to new file
1229 kes Move reservations message lock to lock jcr only this
1231 kes Move main SD locking code into lock.c (new file).
1232 kes Update Win32 build to include lock.c
1236 kes Dirk committed the qwt library code for drawing graphs in bat.
1237 kes Tweak install of qwt so that it is integrated with ./configure.
1239 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1240 out by Eric (my typo).
1241 ebl Fix configure.in to get batch mode enable
1242 kes Return correct string from authenticate.cpp in bat when connecting
1244 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1245 spurious line drops when using TLS.
1246 kes Do not file reparse points when restoring a file that already
1249 kes Implement Windows reparse points -- similar to directories, but
1250 we do not descend into it. This is a first cut. They seem to
1251 be backed up, but restore is not yet tested.
1252 kes Remove restore_blocking in tls code when shutting a socket to leave
1253 it in blocking mode. Hopefully this will fix the encryption bug
1254 reported by Frank Sweetser.
1255 kes When opening a file for backup, tell the OS that we are going to
1256 read it sequentially -- optimization.
1257 kes Change variable names in authenticate_director() to not conflict
1258 with member names in bat. Caused great confusion with compiler,
1261 kes Queue openssl error messages in case of comm problem.
1262 kes Do shutdown() call if socket terminated.
1263 kes Remove some duplicated code in tls.c
1264 kes Move more of the bsock member variables into private and access
1266 kes Add Frank Sweetser's tls-test to the regression suite.
1268 kes Add Swedish sv.po file
1270 kes Don't print clock skew message in FD if less than 3 seconds diff.
1271 kes Add a bit of VSS info to status client.
1272 kes Implement a first cut of Vista VSS, using Win2003 code.
1274 Release: 2.1.20 beta
1276 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1277 loaded tape but uses first drive).
1278 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1279 This was indeed a Win32 issue.
1281 kes Simplify search of autochanger for in-use Volume.
1282 kes Fix exit condition of check for in-use volume. kes Remove
1283 inappropriate my_postgresql_free_result() in db_close()
1285 kes Fix bad return in FD when encryption signature not found.
1286 Probably caused a crash.
1287 kes Inhibit missing encryption signature error messages for
1288 file types where no signature computed.
1289 kes Correct inverted check on autochanger in reservation system.
1290 kes Tweak debug code in autochanger reservation.
1292 kes Add some additional locking in the cats directory in subroutines
1293 that modify packet variables called from batch insert.
1294 kes Rework how dcrs are allocated. new_dcr() can now be called
1295 with an existing pointer, and it will simply clean it up.
1296 This allows the reservation system to test various different
1297 devices, and will permit easy device changes.
1298 kes A bunch of changes all over to handle new new_dcr() calling
1300 kes Work more on the Volume management in the SD. Remember Volumes
1301 for tape drives and for autochangers (even virtual disk changers).
1302 kes When looking at the Volume list to reserve a drive, handle
1303 autochanger names correctly by interating through the changer
1304 devices. Also call the Director to see if a Volume is suitable
1305 for the current job.
1306 kes Fix some bugs in bscan. Make sure all media records are written.
1307 Make sure that valid JobMedia records are written for disk files.
1308 Previously they were completely wrong.
1309 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1310 that the URLs don't change and so that the developers will all
1311 work off the same copy. Rebuild from scrach.
1312 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1314 Release: 2.1.18 beta
1316 kes Fix seg fault in FD from incorrect digest size.
1317 kes Fix argument to non-OpenSSL crypto.c subroutine.
1319 Release: 2.1.16 beta
1321 kes Remove a few malloc()s from the encryption code.
1322 kes Use the class calls to bsock in filed/backup.c and restore.c in
1323 place of the old bnet_xxx code.
1324 kes Implement code that does an on the fly calculation of the
1325 signing digest during restore of encrypted files. It makes
1326 a best guess at the algorithm, and if it is not correct, will
1327 then revert to the old code which reads the file after it is
1329 kes Implement at least one missing crypto stream in stream_to_ascii()
1330 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1331 #877 where a reload with bad syntax causes Dir to exit.
1333 Cut: 2.1.14 beta (not released)
1335 kes Do not free a volume on a tape drive until another volume is
1336 mounted and read, or the autochanger unloads the volume.
1337 This should help the SD re-use volumes that are already mounted,
1338 and should fix bug #886.
1339 kes Apply patch from user brettedgar that allows gnome2-console include
1340 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1341 kes Apply patch from Lucien Weller that fixes day of week calculation
1342 because of DST flag problem. Fixes bug #887.
1344 kes Move find_next_appendable_volume() to after acquiring a valid device
1345 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1347 kes Unable to reproduce bug 872. However added additional testing for
1349 kes Bug #874 resolved by documenting SQLite limitations.
1350 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1351 kes Bug #881 resolved by removing typo in mtx-changer script.
1352 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1353 approval. Added a link to the wiki on the web page, and implemented
1354 a backup from http://paramount.ind.wpi.edu
1356 kes Fix update allfrompool to pass pool name.
1358 kes Convert to pure GPL v2 license.
1359 kes Fix sscanf problems reported by Peter Buschman that caused
1360 a bus error on Solaris.
1361 kes Rework (simplify) the select prompt in bat.
1362 kes Move get_jobid_from_tid() into lib and create a
1364 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1365 should definitely fix the problem of lost error messages in the
1367 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1368 kes Eliminate tcpd.h from the project. Enclose the #include from the
1369 library with extern C ...
1370 kes Add print of signal name when a signal is trapped.
1372 Release: 2.1.12 beta
1374 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1376 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1377 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1378 makes SQLit3 run 30 times faster, though a bit less safe.
1379 kes Implement --with-batch-insert in configure and detection of thread
1380 safe libraries. It is on by default, but turned off if no thread
1381 safe library (e.g. SQLite 2) is available.
1383 kes Fix Bacula PostgreSQL buffer overruns.
1384 kes Do better checking for NULL results returned from PostgreSQL;
1385 implement retry for failed queries; clear results buffer after
1386 failed query. Hopefully this will correct the PostgreSQL failures.
1388 kes Implement algorithm to handle only one appendable volume with
1389 Prefer Mounted Volumes = no.
1390 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1391 returned from a query.
1392 kes Make volume lock recursive.
1393 kes Implement an additional volume reservation algorithm that
1394 starts by considering all reserved volumes then uses the
1395 old brute force algorithm of searching the resources to
1396 find a suitable device.
1397 kes Add new reservations debug code and refine the old code.
1398 kes Update the win32/dll/bacula.defs file.
1400 kes Tweak reservations algorithm to permit a few more cases, i.e.
1401 volume reserved, but on different drive, ...
1402 kes Enhance SD status to include Pool and Media Type for drive in a
1403 more readable format (a bit longer).
1404 kes Fix PostgreSQL double free.
1406 kes Minor refactoring of restore decryption code.
1407 kes Add code to smartall.c to detect double free of a buffer.
1409 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1410 so that bsmtp will create a correct email address (mailbox only).
1411 kes Modify 'memory' command so that the buffers are listed as 'In use'
1412 to avoid confusion with Orphaned buffers.
1413 kes I reworked the OpenSSL include/lib flags to be handled in
1414 the standard Bacula way, which should fix bug #863 concerning
1415 non-standard OpenSSL libraries.
1417 kes Implement Help Browser window for bat.
1418 kes Fix reload bug that reset StorageId to zero.
1420 kes Fix TLS #ifdefing when TLS turned off.
1421 kes Ensure that when labelling a tape with Slot=0 that InChanger
1423 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1425 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1426 add DISTINCT (required by PostgreSQL).
1427 kes Implement BSOCK authenticate_director() method. Eventually will
1428 authenicate all daemons.
1429 kes Move several more functions into the BSOCK class.
1431 kes Add code to tell the OS that we no longer need a cached
1432 file that we were reading. In findlib/bfile.c. Also,
1433 only cache files that we are reading. Thanks to
1434 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1435 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1436 kes Implement script to automatically generate cats and dll .def
1437 files for Win32 dll.
1438 kes Update README.mingw32 to include new .def file generation.
1439 kes Correct typo in UTF-8 error message as reported by:
1440 jhernandez <julianhernandez@gmail.com>
1441 kes Add additional sm_check() code on debug level 1.
1442 kes Set default debug level to 1.
1443 kes Trap SIGABRT in attempt to get traceback.
1445 kes Reduce bat connect timeout from 30 to 15 seconds.
1446 kes More restructuring and implementing BSOCK class in place of
1448 kes Remove a few unnecessary malloc() tests in crypto code.
1449 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1450 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1451 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1453 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1455 kes Fix Verify InitCatalog. The attributes were not pointing to the
1456 correct saved location.
1457 kes Implement message callback so that GUI is sure to get all
1458 daemon messages. Currently displayed in a dialog in bat.
1459 kes Ignore SIGUSR2 (Bacula timer) in bat.
1460 kes Apply regress patch from bug #859 to allow regress to work
1461 with Solaris compiler.
1463 kes Begin adding TLS support to bat.
1464 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1465 clean up lex.c and make it more readable.
1467 kes Move more bnet functions into the BSOCK class.
1468 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1469 kes Complete change of berrno strerror() method to bstrerror()
1471 Release: 2.1.10 beta
1473 kes Cleanup incorrect email addresses in bsmtp.
1474 kes Make bat display initial messages rather than discard them.
1476 kes First cut of adding .mod to the run command.
1477 kes Implement auto display of messages in bat.
1478 kes Enhanced preferences to allow all Bacula output to be
1481 kes Try to make bsmtp date routines more generic.
1482 kes Fixed bug #856 autochanger documentation.
1483 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1484 kes Add new cats entry point so Win32 builds.
1486 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1488 kes Do better checking for the MySQL 64 bit libraries looking for both
1489 .a and .so libraries.
1490 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1491 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1492 kes Require the thread safe version of MySQL during configure. Thanks
1493 to Andre Noll for pointing this out.
1494 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1495 continuing in migration code.
1496 kes Apply implementation of tray-monitor font derived from gnome-console
1497 submitted by Andreas Piesk <a.piesk@gmx.net>
1499 kes Eliminate important memory loss in SQLite
1500 kes Fixed the batch insert MySQL thread specific data that was not
1501 being freed. See cats/mysql.c:db_thread_cleanup().
1502 kes Fix restore before command.
1503 kes Convert old hdr.name to name() in a few places.
1504 kes Implement update jobid command.
1505 kes Return all time_t dates in db_get_job_record()
1506 kes Stop watchdog in SD earlier.
1507 kes Put Pool just after Storage in please mount message.
1508 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1511 kes Update the po files.
1512 kes Fix Verify InitCatalog by making it cache attributes.
1514 kes Change name bacula-bat to bat for man 1 page to correspond to
1516 kes Check for client and store NULL pointers in status command. This
1518 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1519 kes Fix sign extended editing of %p.
1520 kes Clean out a little old #ifdefing in cats/mysql.c
1522 kes If time diff between DIR and FD is more than 600 seconds convert
1523 INFO message to WARNING.
1524 kes Implement heap size display in status for all daemons.
1525 kes Attempt to fix MySQL db open memory loss (not successfull).
1526 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1527 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1528 Query. This looks like a MySQL but but by doing extra releases,
1529 the memory goes away. This should fix bug #847.
1531 kes When backup fails, cancel SD before waiting for sd termination.
1532 kes If SD is waiting for FD to connect during cancel, wake up the
1534 kes Fix fsf code so that errno is correctly reported.
1535 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1537 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1538 so that Bacula doesn't later stumble into a seg fault.
1539 kes Use the term Restore Client in the restore Job report.
1540 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1541 the original job's FileSetId.
1542 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1543 spooling in migration jobs. Not yet tested.
1544 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1545 reading conf file from a pipe. However, do it with open_bpipe()
1546 rather than popen. Not yet tested.
1548 kes Fix an ugly bug where the VolCatBytes were getting updated
1550 kes Implement bconsole memory command that prints current memory
1551 usage, plus smartalloc dump.
1552 kes Clarify some error messages in backup, admin, and migrate.
1553 kes Shrink label dialog to smaller size.
1554 kes Invert Cancel OK buttons on restore to be OK Cancel.
1555 kes More strerror() to bstrerror() conversions.
1557 kes Start implementing bstrerror() in place of strerror().
1558 kes Stripping path -- seems to work.
1560 kes Prevent door and port files from being restored (mostly
1562 kes Free an unreleased buffer in compat code.
1563 kes Change console Job name from *Console* to -Console- to eliminate
1564 Win32 filename problems. Put Win32 path separator when creating
1565 Console file. This fixes bug #846.
1566 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1568 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1570 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1571 to force Win32 error message.
1573 kes First cut strip path. The data should be passed to the FD,
1574 but nothing is done with it yet.
1575 kes Enhance the digest and signature routines in the crypto
1576 library to accept a JCR and to use it to print error messages
1577 so that they will go in the Job report rather than the daemon's
1579 kes Simplify some of the verify signature code.
1580 kes Simplify a few of the alternative returns in the signature
1583 ebl Use only POSIX regex instead of GNU regex in breg.c for
1584 File relocation. It fix broken freebsd compilation.
1585 kes Convert all other Dir files to use new ua class message
1587 kes Tentative fix for missing digest signature in bug 807.
1588 kes Correct handle problem in new win32_ftruncate routine.
1589 kes Convert ua_purge.c and ua_update.c to use new ua class
1590 message routines for bat.
1592 kes Correct incorrect installation of LICENSE in Win32 installer.
1593 kes Display LICENSE at the beginning of the Win32 install.
1594 kes Attempt to correct the need for the png files to be installed
1596 kes Reapply my bat.conf install script in qt-console. I think I
1597 editted bat.pro instead of bat.pro.in and it was lost.
1598 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1599 the /var/lock/subsys for subsysdir. Also corrects typos in the
1602 kes First cut update job.
1603 kes Correct configure to include qmake of src/qt-console directory.
1605 kes Make restore job yes/mod/no print in one command so GUI works.
1606 kes First cut implementing backup and restore client.
1607 kes Correct editing in Verify output that caused a seg fault.
1609 kes Insure that bat.conf is not overwritten during installation.
1610 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1611 while I was implementing migration in March 2006 !
1613 ebl Cleanup file relocation, using char *RegexWhere instead of
1614 char *where + bool where_use_regexp
1615 kes Update some manpages and add bat manpage.
1616 kes Make a first cut at converting bacula.spec.in for bwx-console
1618 kes Apply patch from John Goerzen to add hostname as fourth argument
1619 to make_catalog_backup script.
1620 kes Fix typos I introduced into bsmtp.c
1621 kes Make pm_strxxx() routines handle input of NULL pointer. This
1622 is to protect from NULL pointers returned from SQL databases.
1623 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1624 kes Add more debug to FIFO code -- fix fifo regression test.
1626 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1627 kes Add thread timer to bnet_connect() to break from OS if wait time
1630 kes Update Win32 build to include new files, new symbols, and
1632 kes Implement socket level heartbeat (tcp_keepidle)
1633 ebl Commit File relocation patch
1634 kes Make bat have 'make install' target.
1635 kes Warn during install if old gnome-console binary found.
1636 kes Warn during install if old wx-console binary found.
1637 kes Add -8 option to bsmtp command line to add content type utf-8.
1638 Fixes bug #809. (Character coding problem in bsmtp).
1639 kes If < is found in target (from, to, cc) then do not enclose the
1640 target in < > in bsmtp. Fixes bug #772 (malformed address).
1641 kes When printing certain items in dbcheck, stop after 300000.
1642 Fixes bug #822. (dbcheck loops).
1643 kes Incorrect status in Dir after waiting for mount with poll set.
1646 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1648 kes Print waiting to reserve a device every 5 mins.
1650 kes Don't call close_part in label.c if tape and relabel.
1651 kes Don't free volume if busy in close() -- should help with
1653 ebl Fix #824 RunScript bug (After script could be execute twice)
1654 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1655 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1656 Add a regression script to test RunScript
1658 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1661 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1662 deprecated. No additional bugs will be fixed, and they will be dropped
1663 in a future release (probably 2.4.0).
1664 kes Change name of wx-console to bwx-console to make it more Bacula
1666 kes Change the name of gnome-console to bgnome-console to make it
1669 kes Some time in March, a Feature Request with patch from Jorj Bauer
1670 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1672 The ability for the director to validate a Client (FD) CN against
1673 an arbitrary set of patterns rather than the hostname, with
1674 A new 'TLS Allowed CN' set of directives which are implemented
1675 in the Client resource. Then pattern matching is used in place
1676 of hostname matching against the Certificate's CN. As an example, we
1677 have certificates which (a) use a local CA, and (b) have a CN of the
1679 kes Add new/changed entry points to Win32 build
1680 kes Create unaccepted-projects for projects that are not accepted.
1681 kes Simplify locking in the reservations system.
1682 kes Add more debug code in reservations.
1683 kes Make sure error condition on reserving a volume is handled correctly.
1684 kes Correct handling of volume_in_use.
1685 kes Correct handling of initializing a device.
1686 kes Move handling of broadcasting releasing a device into release_device().
1687 kes Correct attaching dcr to dev so that it is only done if device
1688 is properly initiated.
1690 kes Locking debug level tweaks in SD.
1691 kes Tweak new Volume code.
1693 kes Add exec external-command [wait-seconds] to bconsole. This
1694 executes the external-command. Note! normally external-command
1695 should be enclosed in double quotes.
1696 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1697 it should normally be off in a production system.
1699 kes Implement die command for SD so that we can force it to dump.
1700 kes Implement SD lock debug code.
1701 kes Implement new algorithm for keeping Volume list in SD. It
1702 is now owned by the device.
1704 kes Implement new code for freeing in use volumes that should
1705 resolve if not all, some of the problems of multiple drive
1706 tape conflicts described in bug 801.
1708 kes Fix gui/bacula-web/images files in svn.
1709 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1711 ebl Fix a bug in batch mode (in string escape)
1712 kes Correct migration prune SQL typo that crept in in a
1713 recent 2.1.x change.
1715 kes Move bnet_despool() into class in bsock.c
1716 kes Modify job report to include director name and Build OS.
1717 kes Move drop root privilege and check_catalog() before fork.
1718 kes Add update database scripts (version 9 to 10) to updatedb directory.
1720 ebl Check size and age of each file after its backup to see if
1721 it has changed during backup, if 'checkfilechanges' is set.
1722 The FD will do an extra check (stat(2)) after
1723 each file backup. mtime, ctime and size are compared with
1724 'before backup' information. If time or size mismatch, an
1725 error message will be generated. You must upgrade FD to use it.
1727 kes Make database name and user configurable
1728 --with-db-name=xxx --with-db-user=xxx
1729 kes Add back database type to message.c for debugging.
1731 kes Implement dir_sql() which issues an SQL query.
1732 kes Modify bat medialist to use dir_sql() and do some minor C++
1733 formatting as well as eliminating a number of pointers, simplifing
1736 kes Fix some of the mtx-changer grep commands for tape label readers.
1737 kes Convert a number of bsendmsg into the appropriate send/warning/error
1738 message class calls.
1739 kes Suppress the using database message in the .sql command.
1740 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1742 kes Add context menu for floating a window.
1743 kes Some minor cleanup and name changes in qt-console
1744 kes Add doing mt setblk 0 in Win32 mtx-changer.
1745 kes Apply Martin's bug fix to move definition of ENODATA for
1747 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1748 sqlite2 and sqlite3.
1750 kes More pruning cleanup.
1751 kes Turn on wait_for_drive by default in mtx-changer.
1752 kes Turn on Batch insert code by default as it now passes regression.
1753 kes Add ./configure --enable-bat to enable building of Bat.
1754 No install yet though.
1756 kes Implement a new .sql command for bat.
1757 kes Implement code to turn off pruning in obtaining the next volume.
1758 Pruning is turned off for the status dir command, but turned on
1759 for SD requests and for the list nextvolume command.
1761 kes Correct Qmsg() that was not updated correctly when committing a
1762 previous change (probably the recent TLS patch).
1764 kes Write new subroutine is_volume_purged() that explicitly checks
1765 if the Volume is purged, and if so marks it as such. This should
1766 resolve problems reported about needing to mount twice to recycle
1768 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1769 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1770 amount of duplicated code.
1771 kes Do volume pruning only for the Media Type desired (reduces pruning time
1772 if multiple Media Types are in the same pool).
1773 kes Implement more detailed info in the Job report for the Bacula version
1775 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1777 ebl Add bbatch tool to bench database and insert mode.
1778 Fix sql quote stuff in batch mode
1779 Fix sql stuff for mysql
1781 kes Correct problems with am/pm scheduling. Fixes bug #808.
1782 kes Implement new prunning code that prunes up to 1000 jobs at
1783 the same time. The same technique can be applied to a number
1784 of other prune/purge subroutines.
1785 kes Add an insanity check when starting a new tape job to ensure
1786 that the tape position has not been changed. If so fail the
1788 kes Fix Win32 build for dlls to add the folllowing:
1789 src/lib/bsock.c -- new file with new entry points
1790 src/lib/dlist.c -- new entry points
1791 src/cats/sql_create.c -- new entry point
1792 src/cats/sql_cmds.c -- new DATA item exported
1794 ebl batch mode cleanup bscan-test is ok now.
1795 kes Implement SD code to check length of disk volume before appending.
1797 kes Correct return status on db_batch... routines.
1798 kes Add call to db_write_batch_file_records() to migration code.
1799 ebl Fix AfterJob timing
1800 kes Move the checking of the database in initializion of the Director
1801 to after we drop privileges. This avoids the need for both root
1802 and bacula access to the DB.
1803 kes Correct a misplaced variable definition in src/filed/backup.c
1804 kes Correct how the new batch insert db_create_attributes_record()
1805 uses the arguments. Caused a seg fault in bscan.
1806 kes Implement lock() and unlock() methods in DEVICE class.
1807 Implement block() and set_block(xx) methods in DEVICE class.
1808 kes Modify bnet_connect() so that it uses time() to check for the
1809 wait time expiring (on some OSes, some system calls may not
1810 return immediately).
1811 kes Modify Verify to obtain the previous JobId when it is actually
1812 running rather than at schedule time (as it was in 1.38.x).
1813 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1815 kes When checking pid in pid file, continue running if the pid is
1816 the same as ours. This occurs on IRIX after a system crash.
1819 kes Extend new GUI API.
1820 kes Make the ua structure a class, and implement send_msg(),
1821 error_msg(), warning_msg(), and info_msg().
1823 kes Apply fix from for building wx-console on the Mac from
1825 kes Implement new select mechanism for GUI programs.
1826 kes Reorganize initialization of stackedWidgets in bat.
1828 kes Add updated nagios plugin supplied by Christian Masopust.
1830 kes More bat implementation.
1831 kes File migrate bug with Pool Occupancy using mediaid instead
1832 of jobids. Fixes bug #795.
1833 kes Fix orphaned buffers in filed backup and verify due to
1834 crypto buffers not freed during errors. Fixes bug #789.
1835 kes Extend new GUI api code to tree commands.
1836 kes Ensure that tree and dot commands check console ACLs.
1837 kes Permit marking directory with trailing slash.
1838 kes Allow 20 console connections (instead of only 10).
1840 kes Add smartctl call to bacula-sd.conf as an example of getting
1843 kes Modify jobq.c to let simultaneous restore jobs run. This may
1844 cause them to fail if they cannot get a drive.
1845 kes Add Client Connect Wait to Storage daemon to permit users to
1846 modify the time the SD waits for a FD connection.
1848 kes Correct virtual changer check which was backwards. This caused
1849 volumes to be unloaded into slots already occupied.
1851 kes Apply Command ACL filter to JobId list in restore command.
1852 kes Correct typeo in var.c patch.
1854 kes Don't let Bacula prune File or Job records for the current Job.
1855 kes Fix variable substitution pad + inc bug reported (with patch)
1858 kes Correct SQLite log table index as reported by Luca Berra.
1860 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1862 kes Begin implementing new comm signals for API.
1863 kes Fix a few places in lib/message.c where the open fd may
1865 kes Continue implementing lib/bsock.c (real class). Make jcr,
1866 who, host, and port private. There are new methods to access
1867 them for non-class use. This required touching a number of files.
1869 kes Add LANG=C to autoconf/randpass so it works with languages other
1870 than English. Fixes bug #788.
1872 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1874 You will not be able to generate Include/Exclude list any more.
1875 It will be fixed soon.
1876 If you want to use this, you can apply
1877 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1879 kes Restore of sockets created false error messages because Bacula
1880 no longer restores sockets, but the code was still trying to
1881 set the attributes on a non-existent file. Reported by a user.
1882 ebl finish RecyclePool feature
1883 Media will takes Pool.RecyclePool
1884 when moving from Scratch to a Pool or when user will do
1885 update volume=xxx frompool
1886 To use it, add RecyclePool = aPool to your Pool resource
1889 RecyclePool = Scratch
1893 kes Expand new BSOCK class adding signal() and new BNET signals.
1894 kes Begin enhancing the dot commands adding a new API function
1895 that returns more information and will make it easier
1896 to interface to the Director from a program.
1898 kes Make DEVICE fd private. Its new name is m_fd, and can be
1899 obtained with dev->fd() outside the class. This is the
1900 first of many DEVICE members to be made private.
1901 kes Implement Michael Renner's idea on having a virtual disk
1902 changer. I made some minor modifications (e.g. I did not
1903 implement the Virtual Changer directive, but simply set
1904 the Changer Command to an empty string.
1906 kes Implement a BSOCK send() method that writes the whole record
1907 in a single write() request rather than in two.
1908 ebl add update volume=xxx recyclepool=yyyy
1909 volume takes recyclepool from pool when using update volume=xxx from pool
1911 kes Fix encryption deblocking bug, which caused some restored files
1912 to be truncated. This fixes bug #763.
1913 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1914 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1916 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1917 ebl Use btime_t instead of uint64_t in media patch.
1919 kes Optimize the use of the database a bit in the Status dir command.
1920 Only open it when needed, ensure that if any previous database
1921 was opened, it is closed.
1923 kes Correct VolCatBytes bug from media patch.
1924 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1925 in the case of orphaned records.
1926 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1927 and File records in 300K chunks to be more efficient. This
1928 idea came from Juan Luis Frances (if I remember right).
1929 kes Apply Eric's scratch patch that moves a purged Volume to
1930 the RecyclePool. Question: how is RecyclePool set? what
1931 happens to the ScratchPool?
1932 kes Apply Eric's media patch that collects read/write media
1933 times as well as byte counts. This patch requires a
1934 simultaneous upgrade of the DIR and SD. Note, there
1935 should be some way to turn off timing. I'm not sure
1936 times are in Bacula units.
1937 kes Apply Eric's batch-insert patch.
1939 kes Update projects list.
1941 kes Implement Include/Exclude file lists in FD as dlists using
1942 the new dlistString class. This permits efficiently having
1943 large include/exclude lists and completes project Item 25.
1944 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1945 console is authorized to cancel the job. This fixes bug
1947 kes Modify SD so that the VolCatJobs medium record is updated
1948 at the beginning of a Job rather than the end. This
1949 fixes bug #775 where exceeding MaxVolJobs caused jobs
1951 kes Added a mutex around getting and setting Volume information
1952 so that multiple simultaneous jobs will single thread.
1954 Switch to using Subversion
1955 kes Remove src/pygtk-console/ from configure
1957 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1958 plus the entrypoints.
1959 kes Apply patch supplied that corrects debug print
1960 in canceling jobs for max run time. Supplied as
1961 part of bug #621, which was previously fixed.
1963 kes Test on job_canceled() and sd_msg_thread_done inside
1964 loop starting the message thread to avoid a race condition.
1966 kes Remove rl_catch_signal from console.c as it conflicted
1967 with the header definition. Fixes bug #765.
1968 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1970 kes Clarify some stored/acquire messages to indicate if the
1971 problem is with read or append.
1973 kes Fix memory leak with storage ids in cats/sql_get.c
1974 kes Terminate watchdog earlier to avoid reference to released
1975 memory -- reported by Jason Austin.
1976 kes Move closing the database from jobq.c to the director daemon
1977 termination routine. This fixes memory leaks for shadow jobs
1978 (i.e. migration jobs).
1979 kes Free up the unique jobid chain items in migrate.c. This fixes
1980 a memory leak problem.
1981 kes Convert some ugly looking for statements to use foreach_alist
1982 in findlib/find.c. This will facilitate converting the structures
1983 to use dlist (for large include/exclude lists).
1984 kes Fix a bug in the btree.c and btree.h routines, then rename them
1985 rblist and add them to be built in src/lib. Include some new
1986 methods written by Rudolf Cejka that make the code more readable
1987 (hides some of the ugly casting).
1988 kes Add set_next() and set_prev() methods which make the code much more
1989 readable. Also add a new dlistString class that facilitates storing
1990 strings in dlists. To be used in the large include/exclude lists.
1991 kes Make some trivial modifications to lib/tree.h that use rblist
1992 rather than dlist for storing the tree links. This was suggested
1993 by Rudolf Cejka. The result of this is that the restore tree now
1994 uses red-black binary trees rather than simple linked lists. This
1995 should give rather dramatic speed improvements for directories
1996 contining large numbers of directories/files (more than 10000).
1998 kes Fix maxruntime bug #621.
2000 ebl Implement the include JobID in spool file name project.
2001 kes Reorder projects file in order determined by Jan 2007 vote.
2002 kes Implement item #12 on project list -- quick release of FD by
2004 kes Fix open of SQLite3 db where user does not have write permission
2005 so that DIR does not crash. Fixes bug #761.
2007 kes Add back missing @ in Win32 Makefile.
2008 kes Change 'Device not configured to autolabel' from INFO
2010 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2011 which should restart an indefinite # of times.
2012 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2013 other DIR specifications.
2015 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2016 Fix path quoting in SQLite scripts.
2017 Fix problems with SHGetFolderPath.
2019 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2021 kes Fix Job restart on error bug that promotes an Inc to a Full
2022 backup. This should fix bug #755.
2023 kes Add qt-console and first cut of code.
2027 kes Fix Bacula->Documentation link on Win32 to point to index.html
2028 instead of bacula.html. Fixed bug #750.
2029 kes Return JobId in db_get_job_record() when JobId==0. This should
2031 kes Do not release source pointers when restarting a failed job.
2033 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2034 This *should* fix bug #747.
2035 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2038 kes Modify USTORE constructor to set an empty store_source string,
2039 and don't copy the store_source string in a cancel. Hopefully
2040 this will fix Arno's seg fault, bug #744.
2041 kes Add back code to disable conio in configure. Fixes bug #743.
2042 kes Correct the Options scanner in the FD to correctly handle
2043 SHA1 option, which was eating the next option. Reported by
2045 kes Add code to indicate when the SD is spooling, spool wait, and
2046 despooling as requested by Alan Brown.
2048 Version 2.0.0 released: 4 January 2007