1 Technical notes on version 2.5
5 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
6 examples/database/dbcheck.sql
7 enhancement to wait command: wait mount ...
9 filepattern (restore with regex in bsr)
14 ebl Add code to get more information after a violent signal.
16 ebl Apply Bastian's patch that add spooldata=yes|no option
19 ebl Fix bash shell to sh shell in database creation script
21 kes Fix orphaned jobs (possible deadlock) while pruning.
22 kes Use jcr stored in bsock rather than searching in getmsg.c.
23 This results in about a 5% speed improvement with four
25 kes Implement win32_chmod that uses wide characters, if possible,
26 to get and set the file attributes.
28 kes Apply pane freezing during updates patch from Riccardo Ghetta.
29 kes Rework next_vol and autoprune a bit due to failure in
30 recycle-test. prune_volumes() now returns no status,
31 but should prune at least one Volume, if possible.
32 kes Modify check_if_volume_valid_or_recyclable to reject a
33 volume with Recycle set off.
34 kes Modify prune_volumes() to continue if volume Recycle is off
35 or if the volume has expired. Add more debug.
37 kes Fix bug #1046 VolumeToCatalog incorrectly reports mounted
38 filesystems as missing on the Volume.
39 kes Rewrite the set_jcr_job_status() code to include job status
40 priorities so that more important status changes occur but
41 lower priority status changes will not overwrite something
42 more serious. This could possibly cause reporting incorrect status
43 reporting in some cases. More testing is needed to ensure
44 I have the right priorities. This vastly simplifies the previous
46 Verify Diff status should now be correctly reported, whereas it
48 kes Reduce some debug output.
49 kes Apply Joao's patch to SQLite tables to make chars work.
51 ebl Fix #1175 About update slots that don't reset InChanger flag when
53 ebl Fix #1173 where prune_volume() returns a volume from the scratch.
55 kes Remove jobq.c constraint that read and write SD must be
56 different. This may lead to more deadlocks in the SD,
57 but they should be resolved there.
58 kes Ensure that job report is always printed even if job is failed
60 kes Don't print job report twice for failed VBackup jobs.
62 kes Fix editing of retention time difference to use 64 bit
63 int instead of 64 bit unsigned. This should permit very
64 long retention periods.
65 kes Implement code to prohibit a write job from appending to a
66 Volume that will be used for a read operation. This is
67 new code and could possibly cause some conflicts.
69 kes Integrate James Harper's Exchange Win32 plugin patch.
70 kes Apply patch from Marco van Wieringen that implements the new
71 Solaris libsec interface for ACLs so that Bacula can save and
72 restore both the new ACLs and old ACLs.
73 kes Marco's patch also corrects the file dependency generation code
74 so that it works properly both with shared libraries and static
76 kes Marco's patch also includes a small cleanup of the cats Makefile
77 to remove some references to non-existent files.
79 kes Modify win32 Makefiles to use full paths in most cases.
80 In particular add MAINDIR environment variable that points
81 to the main Bacula source directory.
83 kes Add read volume list code to SD -- not yet used.
84 kes Add James' binutils patch
85 kes Split volume management code out of src/stored/reserve.c into
87 kes Modify configure to do an automatic make clean. This ensures
88 that any changes to ./configure options are handled correctly.
90 Beta version 2.5.16 release:
92 ebl Rename JobStat table to JobHistory
93 kes Ensure that only normally terminated jobs are migrated.
95 kes Add Makefile dependency when using LIBTOOL_LINK so that any
96 change in ./configure options will be accounted for.
98 kes Fix typo in the ACL patch that I overlooked.
99 kes Apply Marco's libtool include patch.
101 kes Apply Bastian Friedrich's ACL patch to eliminate ACL
102 errors during restore.
103 kes Minor cleanup of create_restore_volume_list() code.
104 kes Fix typo in console Makefile.in
106 ebl Fix #1110 about RunScript that can't execute a script with
107 Unicode characters in the path.
109 kes Apply tray-monitor patch from Bastian Friedrich to make it
110 work with the new FD.
112 kes Apply cleanup patch from Marco
113 kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
114 that implements libtool to create shared objects out of
115 the Bacula libraries.
116 kes Fix tray-monitor so it will speak to new FD.
117 ebl Fix bug with ANSI label when volume name length < 6
118 ebl Fix segfault in debug level > 50 with btape.
119 ebl Remove warning message in btape when command is empty.
120 kes Fix Win32 build to pull in new BACULA define.
122 kes Change IncludeDir to Exclude Dir Containing.
123 kes Implement code to prohibit ExcludeDirContaining in an
124 Exclude section (same for Plugin and Options). A bit
125 of a kludge with RES_ITEM2 ...
126 ebl Add field to command list to restrict Runscript console
128 ebl Use a separate JCR when running Console command with Runscript.
129 ebl Permit to mark version as Beta in some outputs
131 kes Add plugin types in jcr.h to reduce need to cast.
132 kes Do better checking of plugin return values.
133 kes Free plugin context after calling pluginFree() as
135 kes Allow plugin to call JobMessage with NULL context.
136 kes Do not add plugin to global list if loadPlugin returns error.
137 kes Rework plugin.h a bit to reduce dependence on Bacula.
139 kes Move generation of bsr file for Virtual Backup to run section
140 so that it is generated just before actually running.
141 Suggested by Graham Keeling.
143 kes Add malloc and free Bacula entry points for plugins. Increment
144 FD plugin interface version. Create a Bacula plugin context
145 structure to keep track of whether or not the plugin is disabled.
146 kes Apply FileIndex fix for plugin name stream suggested by James.
147 kes List plugins in FD status report when debug > 0.
149 ebl Add a new VerId variable that is printed in version command.
150 kes Fix migration SQL not to migrate a job that has not terminated.
151 This is a partial fix to bug #1164.
152 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
153 backup start time bug reported by Graham Keeling.
155 ebl Fix possible bug in cancel_job() with job that are not
158 kes Fix bat build for Win32.
160 kes Copy plugin link field into ffpkt.
162 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
163 It provides FileRegex in bsr files and code to collect regex
164 from the user during restore, an Allow Mixed Priorities feature,
165 and documentation for the above.
166 ebl Remove db Berkeley from configure process
167 kes Do dirty check on hostname (Linux only) and if not resolvable
168 use localhost as default.
169 kes Increase vtape max block to 20GB.
171 kes Refactor restore code to create a close_previous_stream(). This
172 This may destabilize the source.
173 kes Implement planned startRestoreFile() plugin call.
174 ebl Remove missing Loaded information from status slots storage command.
175 ebl Fix Console command problem that cancels the job
176 kes Add more plugin restore debug code.
178 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
179 kes Rewrite plugin restore interface a bit to correspond to how Bacula
180 creates and writes to the restored file.
181 kes Add some DebugMessage() calls to the bpipe-fd.c program.
183 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
184 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
185 Bat; allow add and delete in place of mark and unmark.
186 kes Another attempt to fix the endRestoreFile plugin bug noted below.
188 kes Apply dbi driver patch from Joao.
189 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
190 Bastien Friedrich reported the bug.
191 kes Create plugin instance only when FD job starts.
192 kes Add new FD plugin event: bEventCancelCommand when
193 a cancel command is issued to the FD.
195 kes Add cmd_plugin flag to jcr so we can globally know if a
196 command plugin is running.
197 kes If command plugin running, do not attempt (for the moment)
198 to get Win32 extended attributes.
199 kes Ensure that proper Win32 flags are set in bfile packet
200 if plugin_bopen() works on Win32.
201 kes Remove generated src/plugins/fd/Makefile
203 kes Implement build and install of bpipe-fd.so plugin.
204 kes Rework the interface that passes packets to the plugin
205 so that the packet is started and ended by the packet size.
206 This allows the driver to do a sanity check.
208 kes Rework the pluginIO Bacula internal code to enable
209 proper handling of Win32 error codes from GetLastError.
210 kes Apply Joao's patch to regress startover_libdbi.
212 ebl Add -B option to dbcheck to get catalog information
213 kes Fix Win32 build to include new library function.
214 kes Remove some old reader/writer code.
215 kes Implement ./configure --with-plugindir=xxx
216 ebl Fix the mysql bug in the new accurate code
217 kes Improve plugin debug. Create plugin test.
218 kes Set main thread specific data to INVALID because it
219 has no jcr. This allows debug output to work correctly.
220 kes Add src/plugins/fd/Makefile to ./configure process.
221 kes Make first cut attempt to correct SQL that computes the current
222 Pool usage. This is to fix bug #1159.
223 kes Do a bunch of plugin cleanups for Win32 and more careful checking
224 of PluginDirectory and whether or not a plugin was found.
226 kes This code should fix the race condition that leads to a Director
227 crash at job end time when the job list is updated. This was reported
229 kes Add more plugin documentation and fix include of config.h for
230 Win32 build (I hope).
232 ebl Revert to htable instead of rblist
233 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
234 tree instead of htable.
235 ebl Use a dedicate DB link to compute and send the accurate list
238 kes Fix compile errors in filed/fd_plugin.c.
240 kes Remove all double quotes from SQLite creating script and
241 replace by single quotes as suggested by John Huttley.
243 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
244 It significantly improves the performance of dbcheck for
246 kes Fix bad debug code call in src/filed/accurate.c
248 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
249 output. Perhaps we really need to implement M_SAVED.
251 kes Fix bug #1156 FD crash during processing of Accurate data.
252 kes Tweaks to htable code to improved debugging and make names
253 a bit more meaningful.
255 ebl Remove time_t from update_stats()
257 kes Modify the license of the example plugin program to allow
258 it to be used by anyone for making a Bacula plugin.
259 kes Make apply_rp_codes() in bpipe-fd.c be static.
261 kes Remove Encryption and Accurate lines in vbackup output -- not used.
262 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
263 kes Add host name to items printed during dump.
264 kes Make Check File Changes default on.
266 kes Set the default FD timeout to 3 minutes (previously 30).
267 kes Apply Bastian Friedrich's weird spelling correction patch.
269 kes Always print Verify hash differences. Rename variable to make the
270 code slightly more readable.
272 kes Correct tests for MaxFullInterval as reported by
273 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
274 kes Fix MaxDiffInterval code as well.
275 kes Enable Win32 plugin load code in lib.
276 kes Make Verify code that computes disk checksums use the same
277 algorithm as backup when dealing with sparse files.
278 kes Attempt to run VSS on any systems newer than Vista -- should
279 make it work on Windows Server 2008.
280 ebl Change the new statistic implementation. Remove the UseStatistic
281 directive and add a 'update stats [days=...]' command. You can
282 now decide when copy job records from Job table to JobStat.
283 Statistics are much more accurate with this.
285 kes Fix SQL case problem that may cause the failure of DiskToCatalog
287 kes First cut adding SD plugins.
289 kes Add Slot if it is non-zero to writing bsr file after a
291 kes Change a number of bnet_fsend() into class method calls.
292 kes Begin audit of diff of 2.4 branch to trunk code.
294 ebl Fix the mysql creation script that double-created an
295 index of the same field on the Media table.
296 Add an index to on VolumeName to the Media table for mysql.
298 kes Another try at fixing Vbackup. It looks much better this time.
299 Disable file index sanity check in FD with value stored in
300 attributes record because with Vbackup the File Index gets
301 changed, but not the attributes record.
302 Enhance some debug code.
303 Fix handling of re-indexing records that are copied in Vbackup.
305 kes Made level_to_str() know about Virtual backup.
306 kes Set correct Virtual backup write pool.
307 kes Fix compile warning in new dbcheck port code.
308 kes Fix migration code broken by previous virtual backup fix.
310 kes Fix problem of Virtual backup not writing a sequential FileIndex.
311 kes Reset Virtual backup time/date to the value from the last backup.
312 kes Ensure that storage name is passed to SD on read.
313 kes Correct a problem with Level and Virtual backup, rework how
314 bsrs are printed in debug to use standard routine.
315 kes Apply patch from Chris in bug #1133 that provides alternate db port
317 ebl Remove catalog dependency from bcopy tool.
318 ebl Modify catalog scripts to have an easier packaging integration,
319 using default variables.
320 Make difference between SQLite3 and SQLite in db_get_type()
322 kes Apply most of changes in a patch from:
323 Michael Stapelberg <michael+bacula@stapelberg.de>
324 that allow the Bacula FD to compile on IRIX 6.5.
326 kes Apply patch from Bastian Friedrich that accepts a yes on a
327 delete volume command line.
328 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
329 job when reading from one autochanger and writing to another.
330 kes Minor tweaks (copyright dates convert to use method instead of bnet).
332 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
333 drives when no tape is mounted.
335 kes Add additional info to some SD messages.
336 kes Add fix supplied by Martin Simmons for turning off EOL character
337 in new console multi-command code.
339 kes Fix a Verify InitCatalog problem where in certain cases
340 a garbage filename may be entered in the verification database. This
343 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
344 sent in by Riyas Yoosuf.
346 kes Fix seg fault in Dir during estimate command with no level value
347 given. This fixes bug #1140.
349 kes Add message to migration job when the target job is already migrated.
350 This closes bug #1129.
353 kes Raise some restore debug levels.
354 kes Replace off_t by boffset_t where ever I found it.
356 kes Define a machine dependent ioctl request type for use with
359 kes When a migration job actually runs, re-check the Job record
360 and skip if the job is already migrated. This should
361 significantly reduce the problems with bug #1129.
363 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
364 turn off glibc checks that prevent getting good dumps.
365 kes Implement console 'wait mount' command. Doesn't yet work.
366 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
367 kes Break the do_swapping into do_unload, do_swapping, and
368 do_load. It is much more logical that way.
369 kes Implement a set_dcr_from_vol subroutine in acquire.c for
370 reading volumes. This allows the dcr to be refreshed after being
371 zapped when the wrong volume is mounted.
372 This should fix bug #1126 -- During multiple tape restore, bacula
373 does not ask for physical tape change, but rereads same tape
375 kes Apply patch submitted for bug #1107 with a small modification.
376 This fixes a bug where bcopy copied too many records.
377 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
378 This fixes bug #1124.
379 kes Make the default bat restore Pool be Any. This fixes bug #1118.
381 kes Remove debug statement that crashes the SD at the end of
382 a tape during restore. Fixes bug #1125.
384 kes Implement Win32 bat changes made to Branch-2.4
386 kes Tweak separator command in console to start disabled and
387 allow defining no separator character. Also make code a
388 bit more fault tolerant.
389 kes Make btraceback write the traceback to the working directory
390 before attempting to mail it.
391 kes Add a RFC to Projects.
393 kes Attempt to implement a kludge to make Qt work with bat
395 kes Setup rstorage correctly. Virtual backups are working.
397 kes Move setting JobLevel and JobType into a method, which should
398 allow completing Virtual Backups.
399 kes Fix verify jobs to work again.
401 kes Virtual Backup tweaks -- it is close to working.
403 kes Ensure that SD tried to mount a volume not in an autochanger
404 at least once before asking for operator intervention.
405 kes Make SD aware of Virtual Backup jobs.
406 kes Add VirtualFull for bat.
407 kes Changes to get read storage correct for Virtual Backup.
409 kes Remove old code from label.c
410 kes Split display_display_info() out of write_bsr_file()
411 kes do_vbackup_init() working -- i.e. bootstrap file built.
412 kes Change Bacula trademark owner from John Walker to Kern Sibbald
413 kes First non-working cut of vbackup
414 kes Correct FD heartbeat code to use volatile variable accessed by
416 kes Zero thread id with memset if on Win32 in case it is a struct.
417 kes If cannot create JobMedia record, continue to try to write eof
418 and clean up in block.c
420 kes Add code to interface OpenSSL to new Win32 pthreads code which
421 used a structure for thread_t.
423 ebl tweak bat for win32 compilation
425 ebl Remove tokyo cabinet from the source
426 ebl Update configure/autoconf to support berkeley DB
427 ebl Add a sort to db_get_file_list() to improve bsr construction time.
429 kes Add a mtx-changer.conf file that is not overwritten during
430 an upgrade. It fully configures the mtx-changer script.
431 kes Clear in-use bit on vol when unused while swapping.
433 kes Remove sleep at end of ./bacula
434 kes Clear hash packet for hardlinked files correctly. This corrects
435 a long standing bug where hardlinked files selected individually
436 would occasionally not be restored.
438 kes Apply Eric's patch to ensure that autoprune does not return
439 a Volume not in the autochanger unless requested to do so.
440 kes Correct bat restore display of multiple drives. This fixes
442 kes Do find_a_volume() each time an unload is done. This
443 fixes the failure of maxvol2-test.
445 kes Add some SD debug code.
446 kes Do find_a_volume() each time an unload is done.
447 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
448 and adds --with-db-port to ./configure.
449 kes Use Qmsg() in job.c watchdog callback.
451 kes Release main control rwlock if ABORTing.
452 kes Make watchdog connect timeout queue messages rather than sending
453 directly to avoid lock conflicts with the real thread.
454 kes Add const char in dbd.c to avoid compiler warnings.
455 kes Fix python compiler string warning. Note, IMO the GNU C++
456 compiler guys have made a *very* bad change to their compiler.
457 They now force all strings to be 'const' unless you explicitly
458 cast them, which is extremely ugly and ruins nice code as well
459 as creates a lot of useless work.
461 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
462 mt. This fixes bug #1116.
463 kes Add const in python files to reduce compiler warnings.
464 This may have to be backed out because of later compiler
466 kes Fix failure of 2drive-concurrent-test. Always read label;
467 clear_unload() only after drive is defined in acquire_for_read().
469 kes Generally clean up the manual tape loading code. The main
470 conceptual change is that when a volume is marked to be unloaded,
471 its volume name is retained, and it is only marked as unloaded
472 when either the autoloader says it is unloaded or another tape
473 is read on that drive.
475 kes Add debug code and refactor subroutine in stored/mount.c
476 kes Fix format problem in bscan output reported in bug #1105.
477 ebl Fix get_next_volume_for_append logic with autochanger
478 - use pruned volumes if found
479 - don't reset the inchanger flag after getting a recycled volume
481 Fix recycle_oldest_purged_volume to take InChanger flag in account
483 ebl Add mmap/unmmap implementation for tokyodbm under win32
485 kes Make first step toward eliminating globals from config
486 scanning. Also should be a workaround for FORTIFY_SOURCE
487 GNU C bug -- fixes bug #1042.
489 kes Apply duplicate job tests to restarted jobs.
490 kes Copy more data when restarting a job so that run
491 overrides are kept. This should fix bug #1094.
493 kes More word alignment cleanup.
494 kes Fix bug where SD did not ask operator if the device could not
495 be opened. Reported by Eric.
497 kes Add dbuser to DIR conf file (replaces user).
498 kes Add --with-db-password to ./configure
499 kes Fix regress to handle db_password.
500 ebl Add new 'status storage slots' that list autochanger
502 ebl Update vtape driver to compile only under Linux.
503 ebl Fix a bug when restoring with a wrong mediatype.
505 kes Eliminate ints from conf files and structures to avoid
506 word alignment problems
508 kes Fix bug reported by Scott Barninger where the bacula script
509 refers to scripts in the wrong directory. Needed to meet the
510 requirements of recent FHS location changes.
511 ebl Disable vtape for FreeBSD.
513 ebl Modify disk-changer to check if slot contains something before
516 ebl Fix vtape on win32 and debian.
517 ebl Fix autoselect patch (cause segfault).
519 ebl Fix autoselect option broken for a while. Fix #1089. Need some
520 work with StorageId to be able to use a particular drive in a
523 ebl Rename vtape to vtape.
524 ebl Update vtape driver.
526 ebl Modify vtape driver to avoid sparse file.
527 kes Add make clean of qt-source directory during ./configure
528 kes Store last block number written to tape in DEVICE and
529 use it for testing for correct last block on EOT.
531 Release Version 2.4.0:
535 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
536 This fixes bug #1095.
538 kes Add create_postgresql_database.sql to Win32 installer. Should
539 fix problem reported by Juilio Monteiro.
540 kes Get correct slot when auto unloading a device. This fixes bug
543 kes Fix multiple media restore.
544 kes Make DEVICE Slot private and access it via a method.
545 Allows better control over when it is set and cleared.
546 kes Fix possible seg fault if SQL error.
548 kes Add Martin's fixes to argument scanning for the estimate
549 command. This fixes bug #1093.
550 kes Add debug code to SD.
551 kes Fix renaming a Volume, which used the wrong Volume name.
553 kes If operator has rewind tape, print warning, release tape and
554 try once more. If tape is positioned somewhere, something went
555 wrong, so mark the tape in error and try once more. Previously
556 this error was fatal, now it produces an error message.
557 kes Ensure correct volume name displayed during restore
558 kes Ensure that Volume is mounted for restore.
560 kes Fix a few more Coverity reported problems.
562 kes Apply Allan Black's status dir job count patch.
563 ebl Add information about IMPORT/EXPORT slots in mtx-script.
564 kes Enhance a couple of SD debug messages.
565 kes Tweak unload flag setting and ensure it is set during swap.
567 ebl Fix #1091 about bad output in estimate command.
569 kes Modify autochanger locking to attempt to avoid race
571 kes Make sure device not busy before doing label command.
572 kes Display open() errors except when polling. Previously too
573 many were suppressed. This should fix bug #1070.
574 kes Fix Win32 reparse points. Bacula will not recurse into any
575 reparse point directory, including mount points, unless the
576 directory is explicitly mentioned at the top level (same as
577 with Unix). A file that is linked to another file will be
578 backed up -- much as Unix does for hardlinked files.
579 This fixes bug #1041.
581 kes Remove double quotes from ChangeLog and ReleaseNotes
582 kes Remove StorageId test when pruning and recycling (Eric's changes).
583 kes Remove old form of locking when getting volumes -- causes deadlock.
584 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
585 the name unique and to eliminate compile time error.
586 kes Add accurate.o to Win32 FD Makefile
588 kes Fix cats dll build on Win32 after db_update_job_end_record
589 calling sequence change.
590 ebl Switch to tokyo dbm instead of htable in accurate code
591 ebl Include tokyo dbm to bacula source tree
593 kes Fix buffer overruns detected by Coverity.
595 kes Tweak joblog display.
597 kes Implement --without-qwt
598 kes Fix layout of restore tree dialog
599 kes Add configure bat QWT libraries, so that bat can be built
600 with or without the QWT libaries.
602 ebl Add dummy tape driver for regression tests.
603 kes Make sure we unload the right slot when swapping.
605 kes Add debug times, reduce size of two-pool-changer test
607 ebl Tweak autoconf scripts for vtape
609 kes Improve SD reserve debug code.
610 kes Testing an improvement to free up volumes no longer in use.
612 kes Rework SD acquire for read to handle autochanger Volume
614 kes Implement regression that explicitly tests swapping a Volume
615 from one drive to another.
616 kes Enhance disk-changer to detect most error conditions.
617 kes Fix SD code so that it properly swaps a Volume between drives.
618 This fixes bug #1083.
620 kes Apply libdbi patch from Joao Freitas for regress and for
621 Bacula trunk. Regress now works with libdbi. Nice.
622 kes Apply .nobackup patch from bug #1077 submitted by
624 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
625 name into jobs cloned via the run directive.
627 kes Prevent a Volume that is being swapped from being freed from
628 the volume list. This will most likely fix, at least partially,
630 kes Fix strippath so that it does not get a buffer overrun and crash FD.
631 This fixes bug #1078.
632 kes Remove 50 millisec wait in SD that broke debugger.
633 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
634 that a job may run, counted from when the job was scheduled.
635 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
636 a job may block waiting for a resource, counted from when the job starts
637 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
638 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
639 that implements multiple commands per line in the console when using
640 readline. Modify the default to use a semicolon as the command separator.
642 ebl Fix SQL query in migration code.
643 ebl Make accurate mode with hash disk pass regression tests
645 ebl Implement first cut of accurate backup with hash disk.
647 kes Force unload of volume when wrong volume mounted in SD.
649 kes Fix bat seg fault at termination.
650 kes Add Bacula generated version to bat about box.
653 kes Experiment with allowing multiple read jobs.
654 kes Move final volume swapping code to DCR method and
655 call it from acquire_for_read().
656 kes When wrong volume is mounted during read, unload_autochanger.
658 kes Integrate the libdbi changes from Joao Henrique Freitas
660 kes Stop searching for Volumes in SD askdir if DIR returns the
661 same volume name twice in a row.
662 kes Close bat console windows first to eliminate error message
665 kes Tweak the swap Volume from one drive to another code so that
666 it now seems to work.
667 kes Resolve several problems with recycling that broke the new
668 code (these problems are in 2.2.9 as well).
669 kes Remove the volume lock when calling the sysop code.
670 kes Don't mark a reserved volume with no writers as unused otherwise
673 kes Rework class structures for VOLRES, DCR, and DEVICE to make
674 the method names a bit more logical, and for more logically
675 handling the responsibilities.
677 kes Remove redundant code in terminating the scheduler that just
678 causes a seg fault in many cases.
679 kes Cleanup releasing a volume and make it a DCR method.
680 kes Improve algorithm for detecting pre-reserved volume and
683 kes Tweak volume swapping code so it works.
684 kes Correct name overloading in mount.c
685 kes Replace released flag in VOLRES with reserved and add access
686 methods for the VOLRES class.
687 kes Prevent volume from being released while being swapped.
688 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
689 plugin that add %w (where) and %r (replace flag) editing to
691 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
693 kes Refactor parts of stored/mount.c
695 ebl Add sanity checks for VolWriteTime and VolReadTime
696 ebl Take care of bad clock changes while computing VolWriteTime
697 and VolReadTime. This should fix or limit #1066
698 kes Correct error string numbers in dird/catreq.c
699 kes Restructure reserving, acquiring, and mounting volumes. Calls to
700 autochanger are deferred for mount.c -- simplifes the code.
702 kes Do not prune any running job. It just fails the job.
703 kes Lock the volumes when changing dev->reserved_device and marking
704 the volume unused otherwise the device can get reserved by
705 another job before the volume is released, thus blocking it.
707 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
708 kes Fix bug #1063, reuse of freed ptr in list nextvol.
709 kes Release regex compile buffer in filed/job.c
710 kes Add proper type of const char in sql_create.c
711 kes Turn off debug in daemon termination routines
712 kes Move free_volume_list() before devices are freed in stored.c
713 kes Fix reference to uninitalized stack variables in bregex.c.
714 This should correct bug #1067.
716 kes Fix possible seg fault in SD when freeing a volume entry.
718 kes Implement unload_dev() before swap device.
719 ebl Add statistics prunning with option and menu
720 kes Separate unload_dev() from unload_other_device() in autochanger.c
722 kes Apply patch from bug #1069 that corrects spurious error messages
723 when ACLs enabled on SGI but no ACL exists.
724 ebl Fix small segfault in bacula-sd when debug level is 500
725 kes Modify run_program() and run_program_full_output() to use
726 call by reference for the results string. This corrects a long
727 standing problem where the address of the string may be changed
728 in the subroutine but not in the calling program.
730 kes Re-enable code to remember last volume mounted on a non-tape
732 kes Add patch supplied in bug #1068 that fixes a SD crash when using
733 a Virtual autochanger.
734 kes Generate correct JobMedia records during spooling/despooling when
735 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
736 <tih@hamartun.priv.no> for excellent analysis and testing.
738 kes Tweak hash algorithm for htable using Martin Simmons idea
739 for doing a circular shift.
740 kes Remember what volume is in VTLs (previously turned off for
742 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
743 pointed out some problems in creating JobMedia records during
744 spooling with concurrent jobs. Fix the problem by updating the
745 start file position before despooling and generate a jobmedia
746 record at the end of despooling.
748 kes Fix handling of JobMedia records during spooling and when a
749 Volume is changed without actually writing data to the Volume.
751 kes Rework certain SD locking based on gdb tracebacks of deadlocks
752 sent by Eric. This code now uses only the volume_lock() rather
753 than the reservations lock when at EOM and acquiring a new
755 kes Ensure only one exit point in several subroutines.
757 kes Implement bsock code to permit locking. Use the new code in Verify
758 in the FD to prevent the heartbeat thread from disrupting the Verify
759 data sent to the Dir.
760 kes Modify SD locking to eliminate locking the reservations system from
761 outside the system. Use the volume lock when getting media data
762 and reserving a new volume at end of media.
763 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
764 when SD starts are not locked into place.
766 kes Fix error compiling runscript code on 64 bit machines.
767 kes Tweak Win32 mount point code.
768 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
769 cleared giving bad file estimate).
770 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
773 kes Keep Schedule run lists in order as suggested by
776 kes Implement autostart scripts for Debian.
777 ebl Implement upgrade catalog scripts.
779 ebl Apply jobstat patch for long term statistics. Have to implement
780 purge stats command and upgrade scripts.
781 kes Fix mtx-changer.in for broken Debian mt program.
783 kes Fix large number of JobMedia records reported by Eric Bollengier.
785 kes Apply doc fix from bug #1062.
786 kes Resolve crash and improper restore wx-console Win32 restore
787 GUI. Fixes bug #1065.
788 kes Update Win32 wxWidgets to latest version.
789 kes Attempt to do correct handling of Win32 mount points. Should
791 kes Fix Win32 FD backup/restore memory leak due to improper termination
792 of BackupRead/Write. This fixes bug# 1038.
794 ebl Reduce memory usage for accurate backup, working only with ctime
795 and mtime. (not all Lstat field)
796 About 40MB for my Linux system (400.000 files)
798 kes Add dcr->reserved_volume flag that allows us to release a volume
799 even if it is not vol->released. This allows maxvol2 to work when
800 Volumes expire and we are already writing to the device (i.e. a
801 volume is pulled out from under us by another job terminating after
802 we reserve the drive).
804 ebl Permit multiple command/console per runscript definition.
805 RunScript { command = /bin/true ; command = /bin/false ... }
806 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
807 (restart an application) just after the VSS snapshot on windows.
808 kes Don't zap dcr values during release_volume() as they might
809 have the next Volume to be mounted.
810 kes Fix AIX prototype.
812 kes Second cut of drive switching during backup.
815 kes Update Win32 version of wxWidgets to most recent version.
816 kes Tweak Copy job details.
817 kes Rework dir_find_next_appendable_volume to make a bit more effort
818 to find a suitable volume before giving up.
820 kes Make ask_sysop_to_create... to return if waken from wait.
821 This helps get out of blocked conditions.
822 kes Experimental implementation of switch_device in reservations.
823 kes Implement FD version to allow easier protocol changes.
824 kes Add Plugin Options string -- not yet passed to FD.
825 kes Implement PluginOptions ACL.
827 kes Attempt to correct problems with restores with autochangers and
828 use counts going negative
829 kes Rework SD status command and implement API for bat. Implements
830 header, runing waitreservation, devices, volumes, spooling,
831 and terminated status keywords.
832 .status storage=xxx <keyword>
833 kes Clarify TLS error message by adding double quotes around name.
834 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
835 kes Pass jcr to tls routines so debug messages can be handled better.
836 kes Rework jobq resource allocation code, and possibly fix a bug
837 that caused reference counts to get out of sync.
839 kes Rename fd/dir plugin to use Bacula standard underscore.
840 kes Plugin work -- bring dir up to fd level.
841 kes Start implementation of VTL code
842 kes Fix Win32 build after adding new cats subroutine.
844 kes First cut at Duplicate Job implementation.
846 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
847 kes Start PluginOptions string, and refactor a bit of ua_run.c
848 ebl Apply Allan patch that permit to reset recyclepool.
850 kes Test patch -- possible fix or improvement for bug #1053
851 kes Refactor FD and SD status commands to permit new API code in
852 SD, and to fix Win32 build.
853 kes Win32 build is now working.
855 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
856 some ideas in patch from Scott Bailey.
857 kes Begin implementation of duplicate Job control.
858 kes Fix some of Win32 build after recent additions.
859 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
860 which causes the FD to detect whether or not the OS has the
861 honor no dump bit (*BSD systems), and if so, to skip backing up
862 any file with this bit set. The feature is enabled by setting
863 'honor no dump flag = yes' in the Options section of a FileSet.
865 kes Correct po warning message with datarootdir
866 kes Implement more code in dird.c to put configuration parsing in
867 a class rather than use globals.
868 kes Restructure SD status command for implementation of bat API
871 kes Suppress incorrect 'Will not descend from x into y' messages.
872 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
873 daemon globals used by parser.
874 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
876 kes Fix free of plugin_list when none exists.
878 ebl Apply accurate project patch.
880 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
881 on non-mempool object)
882 kes First cut of converting FD .status to work with bat API.
884 .status client=XXX header
885 .status client=XXX running
886 .status client=XXX terminated
887 kes Implement first cut of Copy Job.
888 kes Implement Catalog in Pool resource. It overrides catalog specified
889 in the Client resource.
891 kes Apply patch (with some difficulties) from Joao Henrique Freitas
892 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
894 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
895 ftruncate() actually works. In the case of some (cheap) NAS devices,
896 it does not, and so recycling NAS Volumes does not work. The code
897 simply unlink()s the file, then recreates it. This fixes bug #1011.
899 kes First incomplete cut of big malloc blocks for htable.
900 kes Tweak plugin code.
902 kes Plugin debug code + tweak a couple bat dialog layouts
904 kes Fix creating first JobMedia record during Migration to include
905 proper index. This caused slow restores of migrated jobs.
906 kes Temp fix to plugin name file_index.
907 kes Bacula backed up and restored a MySQL database.
909 kes Implement plugin restore.
910 kes Implement parsing of db_driver to give db_type index.
912 kes First cut of plugin restore code.
913 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
914 and do not strip paths on symbolic links.
915 kes Set catalog backup database and user name from values specified on
916 the ./configure line.
917 ebl Fix #1031 about wrong pool source information in job report.
920 kes Remove a redundant jcr argument to find_files, match_files, and
922 kes Implement '.status dir header|scheduled|running|terminated' that
923 prints the requested status section. With the exception of the
924 header, the other reports have fields separated by tabs (\t).
926 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
927 a resource embedded run command to find a since time if no explicit
928 since time was supplied on the command line.
929 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
930 that updates the state file at job termination time in addition to
931 when the daemon terminates.
933 kes First version where a plugin did a backup.
934 bpipe-fd.so created a backup file, wrote a test
935 string to it, and Bacua could restore this fabricated file.
937 kes Implement DB Driver = string for the DBI driver.
938 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
939 kes First cut of code for loading Win32 plugin dlls. Implement
940 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
941 and implement a dlfcn.h file based on opengroup's definitions of
944 kes First cut plugin directives.
946 kes Apply patch from bug #1049 to prevent stripping the path on a
948 kes Attempt to fix bug #1047 where stripping a path corrupts the
949 heap. Waiting for feedback.
950 kes Correct the Mount message not to suggest labeling a new tape
951 when doing a restore. Submitted by email by John Stoffel.
952 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
953 FD by using casting. Reported in bug #1042.
955 kes A bit of crypto cleanup. More later.
957 Release Version 2.2.8
959 kes Apply patch from Martin to correct bug #1040, bscan sets existing
961 kes Fixed important spelling error in doc -- bug #1045.
963 ebl Fix bextract to be able to extract non-portable Win32 data to
965 kes Move initialization of read/write res lock earlier in the code.
966 This fixes the crash with a null conf file. This fixes bug
968 kes Redefine CURES in lib/parse_conf to be URES and move it all
969 into lib/parse_conf.c -- this responds to bug #1042, but does
970 not fix it. The fix is not to compile with FORTIFY_SOURCE.
971 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
972 the trunk SVN. I don't think this was reported as a bug.
974 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
976 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
978 kes Add DataDespooling and DataCommitting status (committing is
979 the last despooling).
980 kes Finish implementation of new reservations code noted below.
982 kes Fix bsnprintf for float point numbers. I broke recently when
983 parameterizing some variables. This fixes bug #1036.
984 kes Undo recent reservations changes ... will apply them later
985 when they work better.
987 ebl Fixes #1034 which cause mysql to hang the connection after 8h
988 ebl Change default statistics target of filename.name and path.path
989 fields for PostgreSQL. This speeds lookup by indexes. Thanks
991 kes A few more tweaks to new reservation code. Make sure to clear
992 vol released flag when retaking volume. When reading label and
993 label is bad mark volume unused. When recycling, mark volume
994 unused so it can be renamed.
996 kes Fix reserve_volume() so it doesn't release a volume in use
997 (i.e. a volume entry not marked released). This should be
998 the last part needed to fix bug #1018.
1000 kes Move Heartbeat documentation from Job to Director resource.
1001 This fixes bug #1033.
1003 kes Fix existing switch drive SD code to call autochanger to release
1004 any old volume. This must be done to keep the autochanger from
1005 releasing subsequently newly reserved volumes in doing a close().
1006 This should fix bug #1018.
1007 kes Fail if attempting to get console input in batch mode. This
1008 should help fail RunScript console commands that are incomplete.
1009 kes First cut implementing switch_drive() in SD (not actually called).
1011 kes Implement first cut running console commands in a RunScript.
1013 ebl Fixes bug #1028 where 'Selection Type' option was not usable
1015 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
1018 Release Version 2.2.7
1020 kes Add new free_tls() entry point so that Win32 builds.
1021 kes Fix compile warning in src/lib/util.c
1022 kes Fix entry point for edit_job_codes() so that Win32 builds.
1023 kes Fix seg fault Frank Sweetser reports in regression testing
1024 on his systems. The problem was that the original author of
1025 bsnprintf.c did not take into account the side effects of
1026 using ++x in the argument to a #define.
1027 kes Make SD protocol backward compatible with version 2.2.x.
1029 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
1030 because Bacula no longer restores sockets.
1031 ebl Always use ignorecase fileset option on win32 FD.
1033 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
1034 that implements double quoting include names in conf files,
1035 and also allows piping input by having the first character
1036 be a vertical bar (|).
1037 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
1038 that implement %f in RunScripts to pass the FileSet name.
1039 kes Skip leading | when lex input comes from a pipe as suggested
1040 by Michael Stapelberg <michael@stapelberg.de>.
1042 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
1043 Nerijus Baliunas <nerijus@users.sourceforge.net>
1045 kes Implement Plugin Directory and plugin events.
1047 kes Implement a security enhancement: TLS authentication but no
1048 encryption. Enabled by setting 'TLS Authentication = yes'.
1049 Note when this is on, TLS encryption is turned OFF!
1051 kes This patch corrects a problem where the maximum concurrent storage
1052 jobs counter gets out of sync during restore jobs causing jobs to
1053 'wait on max Storage jobs'. This patch fixes bug #1009.
1055 kes This patch fixes bcopy so that it produces correct Volumes.
1057 kes This patch eliminates spurious output to the console during a VerifyVolume
1058 job that contains encrypted data. It fixes bug #1024.
1060 kes This patch prevents the 'status dir' command from trying to use a scratch
1061 volume and possibly moving it from one pool to another. This patch fixes
1064 kes Add new include to postgresql.c suggested by Marc Cousins so
1065 that it compiles correctly with pgre version 8.3.
1067 kes Fix --archivedir addition to configure. Replace it with
1068 --with-archivedir in configure.in This fixes the regression
1070 kes This patch fixes bug #1012 where the job is canceled because
1071 of Max Run Time exceeded when the job has not yet started.
1073 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
1074 one 'part' to write. Instead of each part being stored on disk,
1075 written to DVD, then deleted from disk, all parts are written to disk,
1076 and only the last is written and deleted from disk.
1077 kes This patch fixes the status command to include the formating string for
1078 JS_AttrInsterting. It fixes bug #1021.
1079 kes This patch should fix the Mac OS X build problem on the latest
1080 Darwin, where sys/types.h was not included correctly (apparently
1081 due to a change in the Mac headers). The solution was to explicitly
1082 ensure that it is defined for the ./configure.
1083 This patch also has a rebuild of configure that includes the Debian
1084 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
1085 kes This patch should ensure that queued messages to the console are
1086 displayed as soon as possible. It should fix bug 1007, but has been
1087 reported not to work.
1089 kes This patch fixes the infinite loop when trying to increase the
1090 maximum number of volumes in a Pool during the add command.
1091 This patch fixes bug #1008.
1093 Release Version 2.2.6
1095 db Remove extra data on estimate command in joblist for bat.
1097 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1098 really change anything, but is the beginning of doing it *right*.
1099 To do it completely right the LastWritten date must be passed to
1100 the SD, but it is not yet done.
1101 kes Minor tweaks to some bat restore SQL.
1102 kes This patch fixes bug #1003 where putting the message output from
1103 a Verify job into the catalog results in a recursive loop. The problem
1104 seems to show up only with postgresql (to be verified).
1105 kes Correct %x to %p in postgresql debug statement.
1107 kes Fix bug #942 where lots of emails where generated when the heartbeat
1108 interval was low and Bacula wanted a different tape from the one in
1111 ebl Add new SD despooling attributes and Dir inserting attributes
1112 job status codes in the catalog (Status table).
1114 ebl Use qmake-qt4 instead of qmake when available (debian system).
1116 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1117 that passing the password via the command line (arg 3) is insecure.
1118 This responds to bug #990 (it doesn't fix it).
1120 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1121 kes Fix a crash in bat when it cannot connect to the Director for example
1122 if the Director is not running.
1123 kes Remove redundant INDEX (JobId) from File table in the trunk.
1124 This fixes bug #992.
1125 kes Make explicit exception to GPL in LICENSE to permit linking
1126 the Win32 FD with Microsoft VSS code.
1127 kes Apply the Solaris package patch from
1128 Masopust, Christian <christian.masopust@siemens.com>
1129 kes Apply the patch to optionally add a timestamp in the debug output
1130 submitted by Mariusz Czulada <manieq@wp.eu>.
1132 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1133 backend (sql_strerror). Fixes bug #989
1135 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1136 It applied with no problems.
1137 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1138 awk are on the path.
1139 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1140 since the status is returned on stderr on Solaris.
1141 kes Activate Close button on tray-monitor window. This fixes
1143 kes Check for NULL item in parse_conf.c before calling it. In the
1144 case of Device, there is no item and this caused a seg fault when
1145 Device appears in the conf file.
1146 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1147 avoids pulling in config.h multiple times in some new code.
1149 kes Fix spurious warning message printed when creating a volume with
1150 a LabelFormat. This fixes bug #976.
1152 Release Version 2.2.5
1154 kes Add JobId in place of Job name in all the Jmsg() output.
1155 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1157 kes Make maxvol-test and new more strict maxvol2-test work.
1158 kes Print JobId in all Jmsg() job output.
1160 kes Add new SD despooling attributes and Dir inserting attributes
1161 job status codes. This fixes bug 961.
1162 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1164 kes Fix doc issue. This fixes bug #963.
1165 kes Fix listing performance problems in bat. Pointed out by
1167 kes Remove old debug code.
1168 kes Fix bat code that tests for Win32. This should fix bug #968
1169 kes Query 5 list wrong Vol after migration. This fixes bug #960
1171 ebl Fix #969 where user can't change Replace option in restore menu.
1173 kes Save jcr in thread specific data (tsd) for each thread.
1174 kes Make Dmsg() print JobId as -%u.
1175 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1176 for the thread if it exists.
1177 kes Remove old reservation debug jid code.
1178 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1179 ebl Add an option that permit to specify spool size in job
1180 definition. (Applying patches/testing/spoolsize_per_job.patch).
1181 You must upgrade SD and DIR at the same time.
1182 dvl Add new configuration item --archivedir
1183 dvl Adjust regression tests to use tmp not /tmp. This will allow
1184 multiple concurrent runs of the regression tests.
1186 kes Fix race condition that drops final block written to volume.
1187 This happens in rare cases with multiple simultaneous jobs
1188 when the Volume fills. This fixes bug #964. May be related
1189 to bug #935 and possibly #903.
1190 kes Eliminate more strerror() and replace with bstrerror().
1191 kes Remove BSD getopt and replace with unrestricted IBM version.
1192 kes Fix Win32 build for changed calling sequences.
1193 kes More tweaks to the mount volume routines to get everything
1194 right. Changed variable name from find to have_vol, which is
1195 much easier to understand.
1196 kes Enhance btimer debug code.
1198 kes Fix FD->SD authorization failure, which was due to spurious
1199 wakeups from a pthread_cond_timedwait(). Simply check the
1200 predicate before continuing. This fixes bug #953.
1201 kes Add const char where needed (more to do). Remove temp debug code.
1203 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1204 kes Don't overwrite error message in check_tables_version.
1206 kes Unlock batch insert tables with same calls used elsewhere.
1207 kes Allow starting 59 jobs a second.
1208 kes Make SD session key more random.
1209 kes Add retry for SQLite opening db if it fails. Probably helps
1211 kes Suppress extra error messages during batch insert failure.
1213 kes Add jcr to timer packets so if killed message can be sent to job.
1214 kes Add JobId to all Dmsg() output.
1215 kes Put some FD auth code on dbglvl rather than fixed.
1216 kes Return insert attributes error message in db msg buffer to avoid
1217 false error messages. Helps fix bug #966.
1218 kes Separate batch init error messages. Probably helps fix bug #966.
1219 kes Make SD code that contructs attribute insert check string lengths
1221 kes If Dir gets an error during inserting attributes, cancel SD.
1222 This reduces unnecessary error messages.
1224 kes Correct search boolean for getting Volume info
1225 ebl Cleanup batch insert code. Probably fixes bug #965.
1226 kes Back out one small change to the reservation system (reserving a volume).
1227 kes Rework how a Volume is mounted. It is now much more intelligent and
1228 will always attempt to use any mounted volume if possible and reduces
1229 calls to the Director asking about volumes.
1231 kes Turn off some code when batch insert not enabled.
1232 kes Edit FD name in connect error messages.
1233 kes Rework the reservation system to take into account that the Director
1234 might give us a Volume that is different from the current one being
1235 used, and to ensure that we don't exceed Maximum Volume Jobs.
1236 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1237 fatal error with multiple jobs running'
1238 kes Add more debug code in reservation system.
1239 kes Implement maxvol-test to check bug #947.
1241 kes Add code to handle tray monitor separated from Win32 FD.
1242 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1244 kes Add missed return in fixing verify bug -- trunk only.
1245 ebl Fix a command parser issue causing a director segfault.
1246 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1247 This fixes bug #954.
1248 kes Increase the max block size to 4MB fixes bug #957.
1249 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1250 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1251 is not properly mounted (recognized) during a poll.
1252 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1253 Job that has differences reports Verify OK.
1254 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1256 ebl Add an option to operate on all pools with update vol parameters.
1257 This complete the project 20. Patch from Nigel Stepp.
1258 ebl Add history support to bconsole when using readline.
1259 Using Ctrl-D to exit doesn't update .bconsole_history
1260 kes Modify new volume algorithm to use max MediaId for generating next
1261 volume number rather than the count of Volumes. This should essentially
1262 eliminate the failure rate if some volumes were deleted. Bug #921.
1263 kes Begin implemention of Optimize Job Scheduling.
1264 kes Implement restore callback that Dirk and I agreed on for bat
1265 restore. This fixes bug #928. Restore of backup of zero files fails.
1266 kes Fix SQL Catalog logging which broke with new db_escape_string
1269 Release Version 2.2.4
1271 kes Fix bacula_cats.def for new db_escape_string().
1272 kes Increase size of name string when FD making connection to SD.
1273 May fix bug #953. FD->SD connection failure.
1275 kes Add code to help Dan debug 2drive-incremental-2disk test.
1276 kes Add code to try to fix bug #908.
1277 kes Add waits to multiple exit detection code to try to force pid
1278 file to always be deleted.
1279 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1280 This fixes bug #950.
1281 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1282 trying to switch drives by checking for blocking before unblocking.
1284 kes Cancel storage daemon in all cases where FD reports error. This
1285 should fix virtually all cases of bug #920.
1286 kes Fix db_escape_string() for MySQL which did not compile.
1288 kes Fix error message that was clobbered when Dir tells SD it does not
1289 have write permission on Volume. This should fix a minor point
1290 in bug #942, but not the main problem.
1291 kes Add code to cancel job in SD if FD connection fails. This should
1293 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1294 dvl Pass jcr and db into db_escape_string() to enable better escaping
1296 kes Fix migration code to get correct Volume name with multiple volumes
1297 by skipping |. Fixes bug #936.
1298 kes Implement patch supplied by Landon to fix bug #944 where using
1299 TLS with bconsole uses 99+% of the CPU.
1300 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1302 kes Move patches into patches directory.
1304 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1307 ebl Using 'm' in bconsole will show messages like before,
1308 and not memory usage.
1309 kes Fix bug #935, and probably also bug #903 where files were not
1310 restored. MediaId was not properly set in JobMedia record after
1313 kes Suppress chown and chmod error messages if the FD is not running
1316 kes Apply Martin Simmons' patch that should turn off the new API usage
1317 when batch insert is turned off allowing building on older
1319 kes Add ./configure search in qwt-qt4 for qwt package
1321 kes Bacula is now free of 3rd party GPL copyrighted code!
1322 kes Remove idcache.c
1323 kes Add guid_to_name.c/h which replace idcache.
1324 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1326 ebl Detect if new PosgreSQL batch insert API is present.
1327 kes Correct incorrect mempool call causing Director crash. Occurs on
1328 systems without va_copy().
1329 sb Update spec files for 2.2.1 release
1331 kes Fix memory pool call in ua_output.c. bug #934.
1332 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1333 Add test program to fnmatch.c
1335 kes Integrate patch to README.vc8 from
1336 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1337 edit it to get it into Unix patch format.
1338 kes Implement mkpath.c to replace old FSF makepath.c
1340 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1342 Release Version 2.2.1
1344 kes Update POTFILES.in
1345 kes Cleanup a few underquoted AC_DEFUNs in configure
1346 kes Apply patch from Martin Simmons that adds a test for va_copy to
1349 kes Fix bug #921 by increasing the number of tries to create a new volume
1351 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1352 can be called multiple times. Implement a version for machines
1353 without va_copy() that gets a big buffer.
1355 kes Integrate more portable zone offset code into bsmtp.c
1356 Submitted by Attila Fülöp.
1358 kes Fix bad SD->FD return status reported by
1359 (James Harper) <james.harper@bendigoit.com.au>
1360 ebl Fix a bug in read_close_session which return random status
1361 thanks to James Harper
1363 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1364 and directory names during restore of single file/directories.
1365 kes Add sanity checks to .sql command when string is empty. Hopefully
1366 that will resolve Dirks Director crash.
1368 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1369 in the bsmtp chat subroutine when debug is >= 10.
1371 kes Fix Director crash when running bat SQL queries.
1372 kes Add David's notes on Item 8: Copy pools.
1374 kes Rework projects file to be current and ready for a vote.
1375 kes Enhance lex scanner error message.
1377 kes Tweak LICENSE file to mention BSD code.
1378 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1379 if specified on the ./configure.
1380 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1381 This class is intended to allow us to open a second bsock to the
1382 Director while in the restore subdialog.
1384 kes Fix configure to create bat Makefile before creating dependencies.
1385 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1386 kes Add a tooltip to the tray monitor.
1387 dvl Set the Director's PID file before dropping privs. This fixes
1390 kes Update AUTHORs file
1391 kes Increase the default max concurrent jobs to 20 in FD and SD to
1392 correspond with the default .conf files.
1393 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1394 some different, of the same file created by RN when porting the
1396 kes Rearrange some of the Win32 directories and the placement of the files
1398 kes Set DEVELOPER flag in version.h
1400 ========================================================================
1401 Release Version 2.2.0
1403 kes Apply a second doc patch from Marc.
1404 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1405 improves the tips section that discusses how to setup multiple
1408 kes Update bat README file.
1409 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1410 corrects a typo in the Recycle status check in db_find_next_volume().
1411 This will probably fix a number of annoying problems with multiple
1413 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1414 bnet calls -- no functionality change.
1416 kes Modify the Verify output to specify if files are missing on
1417 the Volume(s) or disk. Fixes confusion in bug #916.
1418 kes When more than one Volume is read in a migration job, the last
1419 Volume bytes reported are from the last read volume rather than
1420 the last written volume. Fixed. This fixes bug #910.
1421 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1422 It previously printed New Recyle flag is: no. This fixes bug
1425 kes Correct seg fault when switching tape drives during restore.
1426 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1427 be used until after 2.2.0 release.
1429 kes Remove fnmatch() in SD that permitted wild card specifications.
1430 This fixes bug #914.
1432 kes Fix %g in filename returned by SQL for browse tree reported by
1434 kes Fix configure so that it puts config.out in the cwd rather than
1436 kes Attempt to fix the locking problem reported by Eric in bug #906.
1437 kes Make berrno class to leave errno unchanged after constructor call.
1438 kes Make bnet_server use the heap rather than the stack to allocate
1439 its socket fd pointers to avoid a crash at termination. Problem
1440 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1442 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1443 and putting it in depkgs-qt along with Qt4.3.
1445 kes Rework code in acquire.c that switches drives for reading when
1446 the Media Type does not match. This should fix bug #906
1448 ebl Fix a director segfault during job setup #907
1449 kes Correct seg fault in postgresql when first operation returns no
1450 rows. Fixes Dirks File browser problem seg fault with bat.
1452 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1453 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1456 kes Implement PopUp YES/NO dialog for bat.
1458 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1460 kes Correct RunScript to terminate job in FD on failure.
1461 kes Change abort_on_error and AbortJobOnError to fail_on_error
1462 and FailJobOnError in RunScripts.
1463 kes Minor tweaks of code formating in RunScripts, principally to
1464 avoid depassing 80 columns.
1466 kes Eliminate one #ifdef Win32 in bsmtp
1467 kes Implement grow tool to grow a file for testing very large databases.
1468 kes Add big-vol-test to test Bacula seeking with > 5GB.
1471 kes Modify find_next_volume() to return all values in Media record.
1472 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1476 kes Update Release notes
1478 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1479 Warning, in previous beta version, all media get from scratch keep their
1482 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1483 This should fix bug #842. Made a note to look at removing the temp
1484 files at the end of the install.
1485 kes Add ability to mount and unmount a file device providing it is
1486 marked as being removable and has the appropriate mount and unmount
1487 commands defined in the Device resource. This fixes bug #830.
1488 kes When applying a storage override, release all previous storage
1489 definitions rather than just prepending the new storage.
1490 This should prevent a good deal of confusion.
1492 kes Implement ./configure search for qwt libraries.
1494 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1495 Win32 FD. This should fix bug #893.
1496 kes Remove an unnecessary beep in Win32 init code.
1497 kes Update copyright dates in Win32 executable about boxes.
1498 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1499 code with a BSD getopt.c and getopt.h.
1500 kes Remove sched.h from the Win32 compat directory -- not used.
1501 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1502 need to shut it down, do it through the services panel or the command
1504 kes Remove some inappropriate Bacula FSFE copyrights.
1505 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1506 kes Fix regress config non-portable test as pointed out by
1507 Florian Heigl <florian.heigl@gmail.com>
1508 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1509 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1511 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1512 Reported by Frank Sweetser.
1516 kes Fix client-only build.
1517 kes Integrate client-only fixes for bsys (initgroups) and conio from
1518 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1519 kes Make arguments to get_scratch_volume() in same order as other
1521 kes Rework the prune_volumes() subroutine so that after purging and
1522 no volume found in desired pool, it will check for a scratch
1523 volume. This prevents recycling the whole scratch pool.
1524 kes Add code to status storage to print boffset_t (largefile support).
1526 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1527 kes You now need a --with-qwt=<dir> to be able to build bat.
1528 kes Update src/win32/cats/bacula_cats.def to include the new
1529 db_get_query_dbids() call on Win32.
1531 kes Correct a problem when selecting a scratch volume and moving
1532 it to another pool that lost some columns.
1533 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1534 kes Enhance Autochanger error messages to include Volume and device name.
1535 kes Rework prune_volumes() code to take account of InChanger flag,
1536 and to handle recycling volumes going to the Scratch pool and
1537 current pool because the RecyclePool directive.
1538 kes Implement a better and more efficient db_get_query_dbids() to
1539 handle creating and passing back a list of DBIds.
1543 kes Start work on new more efficient DBId subroutine. First use
1544 will be for recycling volume to Scratch inchanger.
1545 kes Increase number of JobIds in pruning from 1000 to 10000.
1546 This to be replaced by above routine.
1547 kes Begin implementation of building Qt4 on Win32.
1548 kes Correct typo in fix I added for bad TLS shutdown.
1549 kes Pull 2.0.3 patches into patches directory.
1550 kes Update Release notes. Include qt-console in line count.
1551 kes Update Projects file.
1553 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1554 bug in migration code where a job that spanned two volumes
1557 kes Implement new BST_DESPOOLING blocked state. Change from locking
1558 during despooling in SD to blocking. This means that other threads
1559 can work with the device structure, in particular the reservations
1560 system while despooling.
1562 kes Fix return in reservation message queue that missed clearing
1563 the jcr lock (implemented 26Jun07 below).
1564 kes Rename a number of dev methods to make locking function names
1566 kes Document locking in lock.c. Move lock structures to new file
1569 kes Move reservations message lock to lock jcr only this
1571 kes Move main SD locking code into lock.c (new file).
1572 kes Update Win32 build to include lock.c
1576 kes Dirk committed the qwt library code for drawing graphs in bat.
1577 kes Tweak install of qwt so that it is integrated with ./configure.
1579 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1580 out by Eric (my typo).
1581 ebl Fix configure.in to get batch mode enable
1582 kes Return correct string from authenticate.cpp in bat when connecting
1584 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1585 spurious line drops when using TLS.
1586 kes Do not file reparse points when restoring a file that already
1589 kes Implement Windows reparse points -- similar to directories, but
1590 we do not descend into it. This is a first cut. They seem to
1591 be backed up, but restore is not yet tested.
1592 kes Remove restore_blocking in tls code when shutting a socket to leave
1593 it in blocking mode. Hopefully this will fix the encryption bug
1594 reported by Frank Sweetser.
1595 kes When opening a file for backup, tell the OS that we are going to
1596 read it sequentially -- optimization.
1597 kes Change variable names in authenticate_director() to not conflict
1598 with member names in bat. Caused great confusion with compiler,
1601 kes Queue openssl error messages in case of comm problem.
1602 kes Do shutdown() call if socket terminated.
1603 kes Remove some duplicated code in tls.c
1604 kes Move more of the bsock member variables into private and access
1606 kes Add Frank Sweetser's tls-test to the regression suite.
1608 kes Add Swedish sv.po file
1610 kes Don't print clock skew message in FD if less than 3 seconds diff.
1611 kes Add a bit of VSS info to status client.
1612 kes Implement a first cut of Vista VSS, using Win2003 code.
1614 Release: 2.1.20 beta
1616 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1617 loaded tape but uses first drive).
1618 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1619 This was indeed a Win32 issue.
1621 kes Simplify search of autochanger for in-use Volume.
1622 kes Fix exit condition of check for in-use volume. kes Remove
1623 inappropriate my_postgresql_free_result() in db_close()
1625 kes Fix bad return in FD when encryption signature not found.
1626 Probably caused a crash.
1627 kes Inhibit missing encryption signature error messages for
1628 file types where no signature computed.
1629 kes Correct inverted check on autochanger in reservation system.
1630 kes Tweak debug code in autochanger reservation.
1632 kes Add some additional locking in the cats directory in subroutines
1633 that modify packet variables called from batch insert.
1634 kes Rework how dcrs are allocated. new_dcr() can now be called
1635 with an existing pointer, and it will simply clean it up.
1636 This allows the reservation system to test various different
1637 devices, and will permit easy device changes.
1638 kes A bunch of changes all over to handle new new_dcr() calling
1640 kes Work more on the Volume management in the SD. Remember Volumes
1641 for tape drives and for autochangers (even virtual disk changers).
1642 kes When looking at the Volume list to reserve a drive, handle
1643 autochanger names correctly by interating through the changer
1644 devices. Also call the Director to see if a Volume is suitable
1645 for the current job.
1646 kes Fix some bugs in bscan. Make sure all media records are written.
1647 Make sure that valid JobMedia records are written for disk files.
1648 Previously they were completely wrong.
1649 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1650 that the URLs don't change and so that the developers will all
1651 work off the same copy. Rebuild from scrach.
1652 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1654 Release: 2.1.18 beta
1656 kes Fix seg fault in FD from incorrect digest size.
1657 kes Fix argument to non-OpenSSL crypto.c subroutine.
1659 Release: 2.1.16 beta
1661 kes Remove a few malloc()s from the encryption code.
1662 kes Use the class calls to bsock in filed/backup.c and restore.c in
1663 place of the old bnet_xxx code.
1664 kes Implement code that does an on the fly calculation of the
1665 signing digest during restore of encrypted files. It makes
1666 a best guess at the algorithm, and if it is not correct, will
1667 then revert to the old code which reads the file after it is
1669 kes Implement at least one missing crypto stream in stream_to_ascii()
1670 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1671 #877 where a reload with bad syntax causes Dir to exit.
1673 Cut: 2.1.14 beta (not released)
1675 kes Do not free a volume on a tape drive until another volume is
1676 mounted and read, or the autochanger unloads the volume.
1677 This should help the SD re-use volumes that are already mounted,
1678 and should fix bug #886.
1679 kes Apply patch from user brettedgar that allows gnome2-console include
1680 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1681 kes Apply patch from Lucien Weller that fixes day of week calculation
1682 because of DST flag problem. Fixes bug #887.
1684 kes Move find_next_appendable_volume() to after acquiring a valid device
1685 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1687 kes Unable to reproduce bug 872. However added additional testing for
1689 kes Bug #874 resolved by documenting SQLite limitations.
1690 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1691 kes Bug #881 resolved by removing typo in mtx-changer script.
1692 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1693 approval. Added a link to the wiki on the web page, and implemented
1694 a backup from http://paramount.ind.wpi.edu
1696 kes Fix update allfrompool to pass pool name.
1698 kes Convert to pure GPL v2 license.
1699 kes Fix sscanf problems reported by Peter Buschman that caused
1700 a bus error on Solaris.
1701 kes Rework (simplify) the select prompt in bat.
1702 kes Move get_jobid_from_tid() into lib and create a
1704 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1705 should definitely fix the problem of lost error messages in the
1707 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1708 kes Eliminate tcpd.h from the project. Enclose the #include from the
1709 library with extern C ...
1710 kes Add print of signal name when a signal is trapped.
1712 Release: 2.1.12 beta
1714 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1716 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1717 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1718 makes SQLit3 run 30 times faster, though a bit less safe.
1719 kes Implement --with-batch-insert in configure and detection of thread
1720 safe libraries. It is on by default, but turned off if no thread
1721 safe library (e.g. SQLite 2) is available.
1723 kes Fix Bacula PostgreSQL buffer overruns.
1724 kes Do better checking for NULL results returned from PostgreSQL;
1725 implement retry for failed queries; clear results buffer after
1726 failed query. Hopefully this will correct the PostgreSQL failures.
1728 kes Implement algorithm to handle only one appendable volume with
1729 Prefer Mounted Volumes = no.
1730 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1731 returned from a query.
1732 kes Make volume lock recursive.
1733 kes Implement an additional volume reservation algorithm that
1734 starts by considering all reserved volumes then uses the
1735 old brute force algorithm of searching the resources to
1736 find a suitable device.
1737 kes Add new reservations debug code and refine the old code.
1738 kes Update the win32/dll/bacula.defs file.
1740 kes Tweak reservations algorithm to permit a few more cases, i.e.
1741 volume reserved, but on different drive, ...
1742 kes Enhance SD status to include Pool and Media Type for drive in a
1743 more readable format (a bit longer).
1744 kes Fix PostgreSQL double free.
1746 kes Minor refactoring of restore decryption code.
1747 kes Add code to smartall.c to detect double free of a buffer.
1749 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1750 so that bsmtp will create a correct email address (mailbox only).
1751 kes Modify 'memory' command so that the buffers are listed as 'In use'
1752 to avoid confusion with Orphaned buffers.
1753 kes I reworked the OpenSSL include/lib flags to be handled in
1754 the standard Bacula way, which should fix bug #863 concerning
1755 non-standard OpenSSL libraries.
1757 kes Implement Help Browser window for bat.
1758 kes Fix reload bug that reset StorageId to zero.
1760 kes Fix TLS #ifdefing when TLS turned off.
1761 kes Ensure that when labelling a tape with Slot=0 that InChanger
1763 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1765 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1766 add DISTINCT (required by PostgreSQL).
1767 kes Implement BSOCK authenticate_director() method. Eventually will
1768 authenicate all daemons.
1769 kes Move several more functions into the BSOCK class.
1771 kes Add code to tell the OS that we no longer need a cached
1772 file that we were reading. In findlib/bfile.c. Also,
1773 only cache files that we are reading. Thanks to
1774 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1775 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1776 kes Implement script to automatically generate cats and dll .def
1777 files for Win32 dll.
1778 kes Update README.mingw32 to include new .def file generation.
1779 kes Correct typo in UTF-8 error message as reported by:
1780 jhernandez <julianhernandez@gmail.com>
1781 kes Add additional sm_check() code on debug level 1.
1782 kes Set default debug level to 1.
1783 kes Trap SIGABRT in attempt to get traceback.
1785 kes Reduce bat connect timeout from 30 to 15 seconds.
1786 kes More restructuring and implementing BSOCK class in place of
1788 kes Remove a few unnecessary malloc() tests in crypto code.
1789 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1790 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1791 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1793 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1795 kes Fix Verify InitCatalog. The attributes were not pointing to the
1796 correct saved location.
1797 kes Implement message callback so that GUI is sure to get all
1798 daemon messages. Currently displayed in a dialog in bat.
1799 kes Ignore SIGUSR2 (Bacula timer) in bat.
1800 kes Apply regress patch from bug #859 to allow regress to work
1801 with Solaris compiler.
1803 kes Begin adding TLS support to bat.
1804 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1805 clean up lex.c and make it more readable.
1807 kes Move more bnet functions into the BSOCK class.
1808 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1809 kes Complete change of berrno strerror() method to bstrerror()
1811 Release: 2.1.10 beta
1813 kes Cleanup incorrect email addresses in bsmtp.
1814 kes Make bat display initial messages rather than discard them.
1816 kes First cut of adding .mod to the run command.
1817 kes Implement auto display of messages in bat.
1818 kes Enhanced preferences to allow all Bacula output to be
1821 kes Try to make bsmtp date routines more generic.
1822 kes Fixed bug #856 autochanger documentation.
1823 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1824 kes Add new cats entry point so Win32 builds.
1826 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1828 kes Do better checking for the MySQL 64 bit libraries looking for both
1829 .a and .so libraries.
1830 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1831 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1832 kes Require the thread safe version of MySQL during configure. Thanks
1833 to Andre Noll for pointing this out.
1834 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1835 continuing in migration code.
1836 kes Apply implementation of tray-monitor font derived from gnome-console
1837 submitted by Andreas Piesk <a.piesk@gmx.net>
1839 kes Eliminate important memory loss in SQLite
1840 kes Fixed the batch insert MySQL thread specific data that was not
1841 being freed. See cats/mysql.c:db_thread_cleanup().
1842 kes Fix restore before command.
1843 kes Convert old hdr.name to name() in a few places.
1844 kes Implement update jobid command.
1845 kes Return all time_t dates in db_get_job_record()
1846 kes Stop watchdog in SD earlier.
1847 kes Put Pool just after Storage in please mount message.
1848 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1851 kes Update the po files.
1852 kes Fix Verify InitCatalog by making it cache attributes.
1854 kes Change name bacula-bat to bat for man 1 page to correspond to
1856 kes Check for client and store NULL pointers in status command. This
1858 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1859 kes Fix sign extended editing of %p.
1860 kes Clean out a little old #ifdefing in cats/mysql.c
1862 kes If time diff between DIR and FD is more than 600 seconds convert
1863 INFO message to WARNING.
1864 kes Implement heap size display in status for all daemons.
1865 kes Attempt to fix MySQL db open memory loss (not successfull).
1866 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1867 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1868 Query. This looks like a MySQL but but by doing extra releases,
1869 the memory goes away. This should fix bug #847.
1871 kes When backup fails, cancel SD before waiting for sd termination.
1872 kes If SD is waiting for FD to connect during cancel, wake up the
1874 kes Fix fsf code so that errno is correctly reported.
1875 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1877 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1878 so that Bacula doesn't later stumble into a seg fault.
1879 kes Use the term Restore Client in the restore Job report.
1880 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1881 the original job's FileSetId.
1882 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1883 spooling in migration jobs. Not yet tested.
1884 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1885 reading conf file from a pipe. However, do it with open_bpipe()
1886 rather than popen. Not yet tested.
1888 kes Fix an ugly bug where the VolCatBytes were getting updated
1890 kes Implement bconsole memory command that prints current memory
1891 usage, plus smartalloc dump.
1892 kes Clarify some error messages in backup, admin, and migrate.
1893 kes Shrink label dialog to smaller size.
1894 kes Invert Cancel OK buttons on restore to be OK Cancel.
1895 kes More strerror() to bstrerror() conversions.
1897 kes Start implementing bstrerror() in place of strerror().
1898 kes Stripping path -- seems to work.
1900 kes Prevent door and port files from being restored (mostly
1902 kes Free an unreleased buffer in compat code.
1903 kes Change console Job name from *Console* to -Console- to eliminate
1904 Win32 filename problems. Put Win32 path separator when creating
1905 Console file. This fixes bug #846.
1906 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1908 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1910 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1911 to force Win32 error message.
1913 kes First cut strip path. The data should be passed to the FD,
1914 but nothing is done with it yet.
1915 kes Enhance the digest and signature routines in the crypto
1916 library to accept a JCR and to use it to print error messages
1917 so that they will go in the Job report rather than the daemon's
1919 kes Simplify some of the verify signature code.
1920 kes Simplify a few of the alternative returns in the signature
1923 ebl Use only POSIX regex instead of GNU regex in breg.c for
1924 File relocation. It fix broken freebsd compilation.
1925 kes Convert all other Dir files to use new ua class message
1927 kes Tentative fix for missing digest signature in bug 807.
1928 kes Correct handle problem in new win32_ftruncate routine.
1929 kes Convert ua_purge.c and ua_update.c to use new ua class
1930 message routines for bat.
1932 kes Correct incorrect installation of LICENSE in Win32 installer.
1933 kes Display LICENSE at the beginning of the Win32 install.
1934 kes Attempt to correct the need for the png files to be installed
1936 kes Reapply my bat.conf install script in qt-console. I think I
1937 editted bat.pro instead of bat.pro.in and it was lost.
1938 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1939 the /var/lock/subsys for subsysdir. Also corrects typos in the
1942 kes First cut update job.
1943 kes Correct configure to include qmake of src/qt-console directory.
1945 kes Make restore job yes/mod/no print in one command so GUI works.
1946 kes First cut implementing backup and restore client.
1947 kes Correct editing in Verify output that caused a seg fault.
1949 kes Insure that bat.conf is not overwritten during installation.
1950 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1951 while I was implementing migration in March 2006 !
1953 ebl Cleanup file relocation, using char *RegexWhere instead of
1954 char *where + bool where_use_regexp
1955 kes Update some manpages and add bat manpage.
1956 kes Make a first cut at converting bacula.spec.in for bwx-console
1958 kes Apply patch from John Goerzen to add hostname as fourth argument
1959 to make_catalog_backup script.
1960 kes Fix typos I introduced into bsmtp.c
1961 kes Make pm_strxxx() routines handle input of NULL pointer. This
1962 is to protect from NULL pointers returned from SQL databases.
1963 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1964 kes Add more debug to FIFO code -- fix fifo regression test.
1966 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1967 kes Add thread timer to bnet_connect() to break from OS if wait time
1970 kes Update Win32 build to include new files, new symbols, and
1972 kes Implement socket level heartbeat (tcp_keepidle)
1973 ebl Commit File relocation patch
1974 kes Make bat have 'make install' target.
1975 kes Warn during install if old gnome-console binary found.
1976 kes Warn during install if old wx-console binary found.
1977 kes Add -8 option to bsmtp command line to add content type utf-8.
1978 Fixes bug #809. (Character coding problem in bsmtp).
1979 kes If < is found in target (from, to, cc) then do not enclose the
1980 target in < > in bsmtp. Fixes bug #772 (malformed address).
1981 kes When printing certain items in dbcheck, stop after 300000.
1982 Fixes bug #822. (dbcheck loops).
1983 kes Incorrect status in Dir after waiting for mount with poll set.
1986 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1988 kes Print waiting to reserve a device every 5 mins.
1990 kes Don't call close_part in label.c if tape and relabel.
1991 kes Don't free volume if busy in close() -- should help with
1993 ebl Fix #824 RunScript bug (After script could be execute twice)
1994 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1995 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1996 Add a regression script to test RunScript
1998 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
2001 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
2002 deprecated. No additional bugs will be fixed, and they will be dropped
2003 in a future release (probably 2.4.0).
2004 kes Change name of wx-console to bwx-console to make it more Bacula
2006 kes Change the name of gnome-console to bgnome-console to make it
2009 kes Some time in March, a Feature Request with patch from Jorj Bauer
2010 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
2012 The ability for the director to validate a Client (FD) CN against
2013 an arbitrary set of patterns rather than the hostname, with
2014 A new 'TLS Allowed CN' set of directives which are implemented
2015 in the Client resource. Then pattern matching is used in place
2016 of hostname matching against the Certificate's CN. As an example, we
2017 have certificates which (a) use a local CA, and (b) have a CN of the
2019 kes Add new/changed entry points to Win32 build
2020 kes Create unaccepted-projects for projects that are not accepted.
2021 kes Simplify locking in the reservations system.
2022 kes Add more debug code in reservations.
2023 kes Make sure error condition on reserving a volume is handled correctly.
2024 kes Correct handling of volume_in_use.
2025 kes Correct handling of initializing a device.
2026 kes Move handling of broadcasting releasing a device into release_device().
2027 kes Correct attaching dcr to dev so that it is only done if device
2028 is properly initiated.
2030 kes Locking debug level tweaks in SD.
2031 kes Tweak new Volume code.
2033 kes Add exec external-command [wait-seconds] to bconsole. This
2034 executes the external-command. Note! normally external-command
2035 should be enclosed in double quotes.
2036 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
2037 it should normally be off in a production system.
2039 kes Implement die command for SD so that we can force it to dump.
2040 kes Implement SD lock debug code.
2041 kes Implement new algorithm for keeping Volume list in SD. It
2042 is now owned by the device.
2044 kes Implement new code for freeing in use volumes that should
2045 resolve if not all, some of the problems of multiple drive
2046 tape conflicts described in bug 801.
2048 kes Fix gui/bacula-web/images files in svn.
2049 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
2051 ebl Fix a bug in batch mode (in string escape)
2052 kes Correct migration prune SQL typo that crept in in a
2053 recent 2.1.x change.
2055 kes Move bnet_despool() into class in bsock.c
2056 kes Modify job report to include director name and Build OS.
2057 kes Move drop root privilege and check_catalog() before fork.
2058 kes Add update database scripts (version 9 to 10) to updatedb directory.
2060 ebl Check size and age of each file after its backup to see if
2061 it has changed during backup, if 'checkfilechanges' is set.
2062 The FD will do an extra check (stat(2)) after
2063 each file backup. mtime, ctime and size are compared with
2064 'before backup' information. If time or size mismatch, an
2065 error message will be generated. You must upgrade FD to use it.
2067 kes Make database name and user configurable
2068 --with-db-name=xxx --with-db-user=xxx
2069 kes Add back database type to message.c for debugging.
2071 kes Implement dir_sql() which issues an SQL query.
2072 kes Modify bat medialist to use dir_sql() and do some minor C++
2073 formatting as well as eliminating a number of pointers, simplifing
2076 kes Fix some of the mtx-changer grep commands for tape label readers.
2077 kes Convert a number of bsendmsg into the appropriate send/warning/error
2078 message class calls.
2079 kes Suppress the using database message in the .sql command.
2080 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
2082 kes Add context menu for floating a window.
2083 kes Some minor cleanup and name changes in qt-console
2084 kes Add doing mt setblk 0 in Win32 mtx-changer.
2085 kes Apply Martin's bug fix to move definition of ENODATA for
2087 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
2088 sqlite2 and sqlite3.
2090 kes More pruning cleanup.
2091 kes Turn on wait_for_drive by default in mtx-changer.
2092 kes Turn on Batch insert code by default as it now passes regression.
2093 kes Add ./configure --enable-bat to enable building of Bat.
2094 No install yet though.
2096 kes Implement a new .sql command for bat.
2097 kes Implement code to turn off pruning in obtaining the next volume.
2098 Pruning is turned off for the status dir command, but turned on
2099 for SD requests and for the list nextvolume command.
2101 kes Correct Qmsg() that was not updated correctly when committing a
2102 previous change (probably the recent TLS patch).
2104 kes Write new subroutine is_volume_purged() that explicitly checks
2105 if the Volume is purged, and if so marks it as such. This should
2106 resolve problems reported about needing to mount twice to recycle
2108 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2109 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2110 amount of duplicated code.
2111 kes Do volume pruning only for the Media Type desired (reduces pruning time
2112 if multiple Media Types are in the same pool).
2113 kes Implement more detailed info in the Job report for the Bacula version
2115 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2117 ebl Add bbatch tool to bench database and insert mode.
2118 Fix sql quote stuff in batch mode
2119 Fix sql stuff for mysql
2121 kes Correct problems with am/pm scheduling. Fixes bug #808.
2122 kes Implement new prunning code that prunes up to 1000 jobs at
2123 the same time. The same technique can be applied to a number
2124 of other prune/purge subroutines.
2125 kes Add an insanity check when starting a new tape job to ensure
2126 that the tape position has not been changed. If so fail the
2128 kes Fix Win32 build for dlls to add the folllowing:
2129 src/lib/bsock.c -- new file with new entry points
2130 src/lib/dlist.c -- new entry points
2131 src/cats/sql_create.c -- new entry point
2132 src/cats/sql_cmds.c -- new DATA item exported
2134 ebl batch mode cleanup bscan-test is ok now.
2135 kes Implement SD code to check length of disk volume before appending.
2137 kes Correct return status on db_batch... routines.
2138 kes Add call to db_write_batch_file_records() to migration code.
2139 ebl Fix AfterJob timing
2140 kes Move the checking of the database in initializion of the Director
2141 to after we drop privileges. This avoids the need for both root
2142 and bacula access to the DB.
2143 kes Correct a misplaced variable definition in src/filed/backup.c
2144 kes Correct how the new batch insert db_create_attributes_record()
2145 uses the arguments. Caused a seg fault in bscan.
2146 kes Implement lock() and unlock() methods in DEVICE class.
2147 Implement block() and set_block(xx) methods in DEVICE class.
2148 kes Modify bnet_connect() so that it uses time() to check for the
2149 wait time expiring (on some OSes, some system calls may not
2150 return immediately).
2151 kes Modify Verify to obtain the previous JobId when it is actually
2152 running rather than at schedule time (as it was in 1.38.x).
2153 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2155 kes When checking pid in pid file, continue running if the pid is
2156 the same as ours. This occurs on IRIX after a system crash.
2159 kes Extend new GUI API.
2160 kes Make the ua structure a class, and implement send_msg(),
2161 error_msg(), warning_msg(), and info_msg().
2163 kes Apply fix from for building wx-console on the Mac from
2165 kes Implement new select mechanism for GUI programs.
2166 kes Reorganize initialization of stackedWidgets in bat.
2168 kes Add updated nagios plugin supplied by Christian Masopust.
2170 kes More bat implementation.
2171 kes File migrate bug with Pool Occupancy using mediaid instead
2172 of jobids. Fixes bug #795.
2173 kes Fix orphaned buffers in filed backup and verify due to
2174 crypto buffers not freed during errors. Fixes bug #789.
2175 kes Extend new GUI api code to tree commands.
2176 kes Ensure that tree and dot commands check console ACLs.
2177 kes Permit marking directory with trailing slash.
2178 kes Allow 20 console connections (instead of only 10).
2180 kes Add smartctl call to bacula-sd.conf as an example of getting
2183 kes Modify jobq.c to let simultaneous restore jobs run. This may
2184 cause them to fail if they cannot get a drive.
2185 kes Add Client Connect Wait to Storage daemon to permit users to
2186 modify the time the SD waits for a FD connection.
2188 kes Correct virtual changer check which was backwards. This caused
2189 volumes to be unloaded into slots already occupied.
2191 kes Apply Command ACL filter to JobId list in restore command.
2192 kes Correct typeo in var.c patch.
2194 kes Don't let Bacula prune File or Job records for the current Job.
2195 kes Fix variable substitution pad + inc bug reported (with patch)
2198 kes Correct SQLite log table index as reported by Luca Berra.
2200 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2202 kes Begin implementing new comm signals for API.
2203 kes Fix a few places in lib/message.c where the open fd may
2205 kes Continue implementing lib/bsock.c (real class). Make jcr,
2206 who, host, and port private. There are new methods to access
2207 them for non-class use. This required touching a number of files.
2209 kes Add LANG=C to autoconf/randpass so it works with languages other
2210 than English. Fixes bug #788.
2212 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2214 You will not be able to generate Include/Exclude list any more.
2215 It will be fixed soon.
2216 If you want to use this, you can apply
2217 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2219 kes Restore of sockets created false error messages because Bacula
2220 no longer restores sockets, but the code was still trying to
2221 set the attributes on a non-existent file. Reported by a user.
2222 ebl finish RecyclePool feature
2223 Media will takes Pool.RecyclePool
2224 when moving from Scratch to a Pool or when user will do
2225 update volume=xxx frompool
2226 To use it, add RecyclePool = aPool to your Pool resource
2229 RecyclePool = Scratch
2233 kes Expand new BSOCK class adding signal() and new BNET signals.
2234 kes Begin enhancing the dot commands adding a new API function
2235 that returns more information and will make it easier
2236 to interface to the Director from a program.
2238 kes Make DEVICE fd private. Its new name is m_fd, and can be
2239 obtained with dev->fd() outside the class. This is the
2240 first of many DEVICE members to be made private.
2241 kes Implement Michael Renner's idea on having a virtual disk
2242 changer. I made some minor modifications (e.g. I did not
2243 implement the Virtual Changer directive, but simply set
2244 the Changer Command to an empty string.
2246 kes Implement a BSOCK send() method that writes the whole record
2247 in a single write() request rather than in two.
2248 ebl add update volume=xxx recyclepool=yyyy
2249 volume takes recyclepool from pool when using update volume=xxx from pool
2251 kes Fix encryption deblocking bug, which caused some restored files
2252 to be truncated. This fixes bug #763.
2253 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2254 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2256 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2257 ebl Use btime_t instead of uint64_t in media patch.
2259 kes Optimize the use of the database a bit in the Status dir command.
2260 Only open it when needed, ensure that if any previous database
2261 was opened, it is closed.
2263 kes Correct VolCatBytes bug from media patch.
2264 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2265 in the case of orphaned records.
2266 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2267 and File records in 300K chunks to be more efficient. This
2268 idea came from Juan Luis Frances (if I remember right).
2269 kes Apply Eric's scratch patch that moves a purged Volume to
2270 the RecyclePool. Question: how is RecyclePool set? what
2271 happens to the ScratchPool?
2272 kes Apply Eric's media patch that collects read/write media
2273 times as well as byte counts. This patch requires a
2274 simultaneous upgrade of the DIR and SD. Note, there
2275 should be some way to turn off timing. I'm not sure
2276 times are in Bacula units.
2277 kes Apply Eric's batch-insert patch.
2279 kes Update projects list.
2281 kes Implement Include/Exclude file lists in FD as dlists using
2282 the new dlistString class. This permits efficiently having
2283 large include/exclude lists and completes project Item 25.
2284 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2285 console is authorized to cancel the job. This fixes bug
2287 kes Modify SD so that the VolCatJobs medium record is updated
2288 at the beginning of a Job rather than the end. This
2289 fixes bug #775 where exceeding MaxVolJobs caused jobs
2291 kes Added a mutex around getting and setting Volume information
2292 so that multiple simultaneous jobs will single thread.
2294 Switch to using Subversion
2295 kes Remove src/pygtk-console/ from configure
2297 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2298 plus the entrypoints.
2299 kes Apply patch supplied that corrects debug print
2300 in canceling jobs for max run time. Supplied as
2301 part of bug #621, which was previously fixed.
2303 kes Test on job_canceled() and sd_msg_thread_done inside
2304 loop starting the message thread to avoid a race condition.
2306 kes Remove rl_catch_signal from console.c as it conflicted
2307 with the header definition. Fixes bug #765.
2308 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2310 kes Clarify some stored/acquire messages to indicate if the
2311 problem is with read or append.
2313 kes Fix memory leak with storage ids in cats/sql_get.c
2314 kes Terminate watchdog earlier to avoid reference to released
2315 memory -- reported by Jason Austin.
2316 kes Move closing the database from jobq.c to the director daemon
2317 termination routine. This fixes memory leaks for shadow jobs
2318 (i.e. migration jobs).
2319 kes Free up the unique jobid chain items in migrate.c. This fixes
2320 a memory leak problem.
2321 kes Convert some ugly looking for statements to use foreach_alist
2322 in findlib/find.c. This will facilitate converting the structures
2323 to use dlist (for large include/exclude lists).
2324 kes Fix a bug in the btree.c and btree.h routines, then rename them
2325 rblist and add them to be built in src/lib. Include some new
2326 methods written by Rudolf Cejka that make the code more readable
2327 (hides some of the ugly casting).
2328 kes Add set_next() and set_prev() methods which make the code much more
2329 readable. Also add a new dlistString class that facilitates storing
2330 strings in dlists. To be used in the large include/exclude lists.
2331 kes Make some trivial modifications to lib/tree.h that use rblist
2332 rather than dlist for storing the tree links. This was suggested
2333 by Rudolf Cejka. The result of this is that the restore tree now
2334 uses red-black binary trees rather than simple linked lists. This
2335 should give rather dramatic speed improvements for directories
2336 contining large numbers of directories/files (more than 10000).
2338 kes Fix maxruntime bug #621.
2340 ebl Implement the include JobID in spool file name project.
2341 kes Reorder projects file in order determined by Jan 2007 vote.
2342 kes Implement item #12 on project list -- quick release of FD by
2344 kes Fix open of SQLite3 db where user does not have write permission
2345 so that DIR does not crash. Fixes bug #761.
2347 kes Add back missing @ in Win32 Makefile.
2348 kes Change 'Device not configured to autolabel' from INFO
2350 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2351 which should restart an indefinite # of times.
2352 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2353 other DIR specifications.
2355 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2356 Fix path quoting in SQLite scripts.
2357 Fix problems with SHGetFolderPath.
2359 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2361 kes Fix Job restart on error bug that promotes an Inc to a Full
2362 backup. This should fix bug #755.
2363 kes Add qt-console and first cut of code.
2367 kes Fix Bacula->Documentation link on Win32 to point to index.html
2368 instead of bacula.html. Fixed bug #750.
2369 kes Return JobId in db_get_job_record() when JobId==0. This should
2371 kes Do not release source pointers when restarting a failed job.
2373 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2374 This *should* fix bug #747.
2375 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2378 kes Modify USTORE constructor to set an empty store_source string,
2379 and don't copy the store_source string in a cancel. Hopefully
2380 this will fix Arno's seg fault, bug #744.
2381 kes Add back code to disable conio in configure. Fixes bug #743.
2382 kes Correct the Options scanner in the FD to correctly handle
2383 SHA1 option, which was eating the next option. Reported by
2385 kes Add code to indicate when the SD is spooling, spool wait, and
2386 despooling as requested by Alan Brown.
2388 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob