1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
31 separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
36 kes Raise some restore debug levels.
37 kes Replace off_t by boffset_t where ever I found it.
39 kes Define a machine dependent ioctl request type for use with
42 kes When a migration job actually runs, re-check the Job record
43 and skip if the job is already migrated. This should
44 significantly reduce the problems with bug #1129.
46 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
47 turn off glibc checks that prevent getting good dumps.
48 kes Implement console 'wait mount' command. Doesn't yet work.
49 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
50 kes Break the do_swapping into do_unload, do_swapping, and
51 do_load. It is much more logical that way.
52 kes Implement a set_dcr_from_vol subroutine in acquire.c for
53 reading volumes. This allows the dcr to be refreshed after being
54 zapped when the wrong volume is mounted.
55 This should fix bug #1126 -- During multiple tape restore, bacula
56 does not ask for physical tape change, but rereads same tape
58 kes Apply patch submitted for bug #1107 with a small modification.
59 This fixes a bug where bcopy copied too many records.
60 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
62 kes Make the default bat restore Pool be Any. This fixes bug #1118.
64 kes Remove debug statement that crashes the SD at the end of
65 a tape during restore. Fixes bug #1125.
67 kes Implement Win32 bat changes made to Branch-2.4
69 kes Tweak separator command in console to start disabled and
70 allow defining no separator character. Also make code a
71 bit more fault tolerant.
72 kes Make btraceback write the traceback to the working directory
73 before attempting to mail it.
74 kes Add a RFC to Projects.
76 kes Attempt to implement a kludge to make Qt work with bat
78 kes Setup rstorage correctly. Virtual backups are working.
80 kes Move setting JobLevel and JobType into a method, which should
81 allow completing Virtual Backups.
82 kes Fix verify jobs to work again.
84 kes Virtual Backup tweaks -- it is close to working.
86 kes Ensure that SD tried to mount a volume not in an autochanger
87 at least once before asking for operator intervention.
88 kes Make SD aware of Virtual Backup jobs.
89 kes Add VirtualFull for bat.
90 kes Changes to get read storage correct for Virtual Backup.
92 kes Remove old code from label.c
93 kes Split display_display_info() out of write_bsr_file()
94 kes do_vbackup_init() working -- i.e. bootstrap file built.
95 kes Change Bacula trademark owner from John Walker to Kern Sibbald
96 kes First non-working cut of vbackup
97 kes Correct FD heartbeat code to use volatile variable accessed by
99 kes Zero thread id with memset if on Win32 in case it is a struct.
100 kes If cannot create JobMedia record, continue to try to write eof
101 and clean up in block.c
103 kes Add code to interface OpenSSL to new Win32 pthreads code which
104 used a structure for thread_t.
106 ebl tweak bat for win32 compilation
108 ebl Remove tokyo cabinet from the source
109 ebl Update configure/autoconf to support berkeley DB
110 ebl Add a sort to db_get_file_list() to improve bsr construction time.
112 kes Add a mtx-changer.conf file that is not overwritten during
113 an upgrade. It fully configures the mtx-changer script.
114 kes Clear in-use bit on vol when unused while swapping.
116 kes Remove sleep at end of ./bacula
117 kes Clear hash packet for hardlinked files correctly. This corrects
118 a long standing bug where hardlinked files selected individually
119 would occasionally not be restored.
121 kes Apply Eric's patch to ensure that autoprune does not return
122 a Volume not in the autochanger unless requested to do so.
123 kes Correct bat restore display of multiple drives. This fixes
125 kes Do find_a_volume() each time an unload is done. This
126 fixes the failure of maxvol2-test.
128 kes Add some SD debug code.
129 kes Do find_a_volume() each time an unload is done.
130 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
131 and adds --with-db-port to ./configure.
132 kes Use Qmsg() in job.c watchdog callback.
134 kes Release main control rwlock if ABORTing.
135 kes Make watchdog connect timeout queue messages rather than sending
136 directly to avoid lock conflicts with the real thread.
137 kes Add const char in dbd.c to avoid compiler warnings.
138 kes Fix python compiler string warning. Note, IMO the GNU C++
139 compiler guys have made a *very* bad change to their compiler.
140 They now force all strings to be 'const' unless you explicitly
141 cast them, which is extremely ugly and ruins nice code as well
142 as creates a lot of useless work.
144 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
145 mt. This fixes bug #1116.
146 kes Add const in python files to reduce compiler warnings.
147 This may have to be backed out because of later compiler
149 kes Fix failure of 2drive-concurrent-test. Always read label;
150 clear_unload() only after drive is defined in acquire_for_read().
152 kes Generally clean up the manual tape loading code. The main
153 conceptual change is that when a volume is marked to be unloaded,
154 its volume name is retained, and it is only marked as unloaded
155 when either the autoloader says it is unloaded or another tape
156 is read on that drive.
158 kes Add debug code and refactor subroutine in stored/mount.c
159 kes Fix format problem in bscan output reported in bug #1105.
160 ebl Fix get_next_volume_for_append logic with autochanger
161 - use pruned volumes if found
162 - don't reset the inchanger flag after getting a recycled volume
164 Fix recycle_oldest_purged_volume to take InChanger flag in account
166 ebl Add mmap/unmmap implementation for tokyodbm under win32
168 kes Make first step toward eliminating globals from config
169 scanning. Also should be a workaround for FORTIFY_SOURCE
170 GNU C bug -- fixes bug #1042.
172 kes Apply duplicate job tests to restarted jobs.
173 kes Copy more data when restarting a job so that run
174 overrides are kept. This should fix bug #1094.
176 kes More word alignment cleanup.
177 kes Fix bug where SD did not ask operator if the device could not
178 be opened. Reported by Eric.
180 kes Add dbuser to DIR conf file (replaces user).
181 kes Add --with-db-password to ./configure
182 kes Fix regress to handle db_password.
183 ebl Add new "status storage slots" that list autochanger
185 ebl Update vtape driver to compile only under Linux.
186 ebl Fix a bug when restoring with a wrong mediatype.
188 kes Eliminate ints from conf files and structures to avoid
189 word alignment problems
191 kes Fix bug reported by Scott Barninger where the bacula script
192 refers to scripts in the wrong directory. Needed to meet the
193 requirements of recent FHS location changes.
194 ebl Disable vtape for FreeBSD.
196 ebl Modify disk-changer to check if slot contains something before
199 ebl Fix vtape on win32 and debian.
200 ebl Fix autoselect patch (cause segfault).
202 ebl Fix autoselect option broken for a while. Fix #1089. Need some
203 work with StorageId to be able to use a particular drive in a
206 ebl Rename vtape to vtape.
207 ebl Update vtape driver.
209 ebl Modify vtape driver to avoid sparse file.
210 kes Add make clean of qt-source directory during ./configure
211 kes Store last block number written to tape in DEVICE and
212 use it for testing for correct last block on EOT.
214 Release Version 2.4.0:
218 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
219 This fixes bug #1095.
221 kes Add create_postgresql_database.sql to Win32 installer. Should
222 fix problem reported by Juilio Monteiro.
223 kes Get correct slot when auto unloading a device. This fixes bug
226 kes Fix multiple media restore.
227 kes Make DEVICE Slot private and access it via a method.
228 Allows better control over when it is set and cleared.
229 kes Fix possible seg fault if SQL error.
231 kes Add Martin's fixes to argument scanning for the estimate
232 command. This fixes bug #1093.
233 kes Add debug code to SD.
234 kes Fix renaming a Volume, which used the wrong Volume name.
236 kes If operator has rewind tape, print warning, release tape and
237 try once more. If tape is positioned somewhere, something went
238 wrong, so mark the tape in error and try once more. Previously
239 this error was fatal, now it produces an error message.
240 kes Ensure correct volume name displayed during restore
241 kes Ensure that Volume is mounted for restore.
243 kes Fix a few more Coverity reported problems.
245 kes Apply Allan Black's status dir job count patch.
246 ebl Add information about IMPORT/EXPORT slots in mtx-script.
247 kes Enhance a couple of SD debug messages.
248 kes Tweak unload flag setting and ensure it is set during swap.
250 ebl Fix #1091 about bad output in estimate command.
252 kes Modify autochanger locking to attempt to avoid race
254 kes Make sure device not busy before doing label command.
255 kes Display open() errors except when polling. Previously too
256 many were suppressed. This should fix bug #1070.
257 kes Fix Win32 reparse points. Bacula will not recurse into any
258 reparse point directory, including mount points, unless the
259 directory is explicitly mentioned at the top level (same as
260 with Unix). A file that is linked to another file will be
261 backed up -- much as Unix does for hardlinked files.
262 This fixes bug #1041.
264 kes Remove double quotes from ChangeLog and ReleaseNotes
265 kes Remove StorageId test when pruning and recycling (Eric's changes).
266 kes Remove old form of locking when getting volumes -- causes deadlock.
267 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
268 the name unique and to eliminate compile time error.
269 kes Add accurate.o to Win32 FD Makefile
271 kes Fix cats dll build on Win32 after db_update_job_end_record
272 calling sequence change.
273 ebl Switch to tokyo dbm instead of htable in accurate code
274 ebl Include tokyo dbm to bacula source tree
276 kes Fix buffer overruns detected by Coverity.
278 kes Tweak joblog display.
280 kes Implement --without-qwt
281 kes Fix layout of restore tree dialog
282 kes Add configure bat QWT libraries, so that bat can be built
283 with or without the QWT libaries.
285 ebl Add dummy tape driver for regression tests.
286 kes Make sure we unload the right slot when swapping.
288 kes Add debug times, reduce size of two-pool-changer test
290 ebl Tweak autoconf scripts for vtape
292 kes Improve SD reserve debug code.
293 kes Testing an improvement to free up volumes no longer in use.
295 kes Rework SD acquire for read to handle autochanger Volume
297 kes Implement regression that explicitly tests swapping a Volume
298 from one drive to another.
299 kes Enhance disk-changer to detect most error conditions.
300 kes Fix SD code so that it properly swaps a Volume between drives.
301 This fixes bug #1083.
303 kes Apply libdbi patch from Joao Freitas for regress and for
304 Bacula trunk. Regress now works with libdbi. Nice.
305 kes Apply .nobackup patch from bug #1077 submitted by
307 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
308 name into jobs cloned via the run directive.
310 kes Prevent a Volume that is being swapped from being freed from
311 the volume list. This will most likely fix, at least partially,
313 kes Fix strippath so that it does not get a buffer overrun and crash FD.
314 This fixes bug #1078.
315 kes Remove 50 millisec wait in SD that broke debugger.
316 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
317 that a job may run, counted from when the job was scheduled.
318 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
319 a job may block waiting for a resource, counted from when the job starts
320 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
321 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
322 that implements multiple commands per line in the console when using
323 readline. Modify the default to use a semicolon as the command separator.
325 ebl Fix SQL query in migration code.
326 ebl Make accurate mode with hash disk pass regression tests
328 ebl Implement first cut of accurate backup with hash disk.
330 kes Force unload of volume when wrong volume mounted in SD.
332 kes Fix bat seg fault at termination.
333 kes Add Bacula generated version to bat about box.
336 kes Experiment with allowing multiple read jobs.
337 kes Move final volume swapping code to DCR method and
338 call it from acquire_for_read().
339 kes When wrong volume is mounted during read, unload_autochanger.
341 kes Integrate the libdbi changes from Joao Henrique Freitas
343 kes Stop searching for Volumes in SD askdir if DIR returns the
344 same volume name twice in a row.
345 kes Close bat console windows first to eliminate error message
348 kes Tweak the swap Volume from one drive to another code so that
349 it now seems to work.
350 kes Resolve several problems with recycling that broke the new
351 code (these problems are in 2.2.9 as well).
352 kes Remove the volume lock when calling the sysop code.
353 kes Don't mark a reserved volume with no writers as unused otherwise
356 kes Rework class structures for VOLRES, DCR, and DEVICE to make
357 the method names a bit more logical, and for more logically
358 handling the responsibilities.
360 kes Remove redundant code in terminating the scheduler that just
361 causes a seg fault in many cases.
362 kes Cleanup releasing a volume and make it a DCR method.
363 kes Improve algorithm for detecting pre-reserved volume and
366 kes Tweak volume swapping code so it works.
367 kes Correct name overloading in mount.c
368 kes Replace released flag in VOLRES with reserved and add access
369 methods for the VOLRES class.
370 kes Prevent volume from being released while being swapped.
371 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
373 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
375 kes Refactor parts of stored/mount.c
377 ebl Add sanity checks for VolWriteTime and VolReadTime
378 ebl Take care of bad clock changes while computing VolWriteTime
379 and VolReadTime. This should fix or limit #1066
380 kes Correct error string numbers in dird/catreq.c
381 kes Restructure reserving, acquiring, and mounting volumes. Calls to
382 autochanger are deferred for mount.c -- simplifes the code.
384 kes Do not prune any running job. It just fails the job.
385 kes Lock the volumes when changing dev->reserved_device and marking
386 the volume unused otherwise the device can get reserved by
387 another job before the volume is released, thus blocking it.
389 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
390 kes Fix bug #1063, reuse of freed ptr in list nextvol.
391 kes Release regex compile buffer in filed/job.c
392 kes Add proper type of const char in sql_create.c
393 kes Turn off debug in daemon termination routines
394 kes Move free_volume_list() before devices are freed in stored.c
395 kes Fix reference to uninitalized stack variables in bregex.c.
396 This should correct bug #1067.
398 kes Fix possible seg fault in SD when freeing a volume entry.
400 kes Implement unload_dev() before swap device.
401 ebl Add statistics prunning with option and menu
402 kes Separate unload_dev() from unload_other_device() in autochanger.c
404 kes Apply patch from bug #1069 that corrects spurious error messages
405 when ACLs enabled on SGI but no ACL exists.
406 ebl Fix small segfault in bacula-sd when debug level is 500
407 kes Modify run_program() and run_program_full_output() to use
408 call by reference for the results string. This corrects a long
409 standing problem where the address of the string may be changed
410 in the subroutine but not in the calling program.
412 kes Re-enable code to remember last volume mounted on a non-tape
414 kes Add patch supplied in bug #1068 that fixes a SD crash when using
415 a Virtual autochanger.
416 kes Generate correct JobMedia records during spooling/despooling when
417 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
418 <tih@hamartun.priv.no> for excellent analysis and testing.
420 kes Tweak hash algorithm for htable using Martin Simmons idea
421 for doing a circular shift.
422 kes Remember what volume is in VTLs (previously turned off for
424 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
425 pointed out some problems in creating JobMedia records during
426 spooling with concurrent jobs. Fix the problem by updating the
427 start file position before despooling and generate a jobmedia
428 record at the end of despooling.
430 kes Fix handling of JobMedia records during spooling and when a
431 Volume is changed without actually writing data to the Volume.
433 kes Rework certain SD locking based on gdb tracebacks of deadlocks
434 sent by Eric. This code now uses only the volume_lock() rather
435 than the reservations lock when at EOM and acquiring a new
437 kes Ensure only one exit point in several subroutines.
439 kes Implement bsock code to permit locking. Use the new code in Verify
440 in the FD to prevent the heartbeat thread from disrupting the Verify
441 data sent to the Dir.
442 kes Modify SD locking to eliminate locking the reservations system from
443 outside the system. Use the volume lock when getting media data
444 and reserving a new volume at end of media.
445 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
446 when SD starts are not locked into place.
448 kes Fix error compiling runscript code on 64 bit machines.
449 kes Tweak Win32 mount point code.
450 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
451 cleared giving bad file estimate).
452 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
455 kes Keep Schedule run lists in order as suggested by
458 kes Implement autostart scripts for Debian.
459 ebl Implement upgrade catalog scripts.
461 ebl Apply jobstat patch for long term statistics. Have to implement
462 purge stats command and upgrade scripts.
463 kes Fix mtx-changer.in for broken Debian mt program.
465 kes Fix large number of JobMedia records reported by Eric Bollengier.
467 kes Apply doc fix from bug #1062.
468 kes Resolve crash and improper restore wx-console Win32 restore
469 GUI. Fixes bug #1065.
470 kes Update Win32 wxWidgets to latest version.
471 kes Attempt to do correct handling of Win32 mount points. Should
473 kes Fix Win32 FD backup/restore memory leak due to improper termination
474 of BackupRead/Write. This fixes bug# 1038.
476 ebl Reduce memory usage for accurate backup, working only with ctime
477 and mtime. (not all Lstat field)
478 About 40MB for my Linux system (400.000 files)
480 kes Add dcr->reserved_volume flag that allows us to release a volume
481 even if it is not vol->released. This allows maxvol2 to work when
482 Volumes expire and we are already writing to the device (i.e. a
483 volume is pulled out from under us by another job terminating after
484 we reserve the drive).
486 ebl Permit multiple command/console per runscript definition.
487 RunScript { command = /bin/true ; command = /bin/false ... }
488 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
489 (restart an application) just after the VSS snapshot on windows.
490 kes Don't zap dcr values during release_volume() as they might
491 have the next Volume to be mounted.
492 kes Fix AIX prototype.
494 kes Second cut of drive switching during backup.
497 kes Update Win32 version of wxWidgets to most recent version.
498 kes Tweak Copy job details.
499 kes Rework dir_find_next_appendable_volume to make a bit more effort
500 to find a suitable volume before giving up.
502 kes Make ask_sysop_to_create... to return if waken from wait.
503 This helps get out of blocked conditions.
504 kes Experimental implementation of switch_device in reservations.
505 kes Implement FD version to allow easier protocol changes.
506 kes Add Plugin Options string -- not yet passed to FD.
507 kes Implement PluginOptions ACL.
509 kes Attempt to correct problems with restores with autochangers and
510 use counts going negative
511 kes Rework SD status command and implement API for bat. Implements
512 header, runing waitreservation, devices, volumes, spooling,
513 and terminated status keywords.
514 .status storage=xxx <keyword>
515 kes Clarify TLS error message by adding double quotes around name.
516 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
517 kes Pass jcr to tls routines so debug messages can be handled better.
518 kes Rework jobq resource allocation code, and possibly fix a bug
519 that caused reference counts to get out of sync.
521 kes Rename fd/dir plugin to use Bacula standard underscore.
522 kes Plugin work -- bring dir up to fd level.
523 kes Start implementation of VTL code
524 kes Fix Win32 build after adding new cats subroutine.
526 kes First cut at Duplicate Job implementation.
528 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
529 kes Start PluginOptions string, and refactor a bit of ua_run.c
530 ebl Apply Allan patch that permit to reset recyclepool.
532 kes Test patch -- possible fix or improvement for bug #1053
533 kes Refactor FD and SD status commands to permit new API code in
534 SD, and to fix Win32 build.
535 kes Win32 build is now working.
537 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
538 some ideas in patch from Scott Bailey.
539 kes Begin implementation of duplicate Job control.
540 kes Fix some of Win32 build after recent additions.
541 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
542 which causes the FD to detect whether or not the OS has the
543 honor no dump bit (*BSD systems), and if so, to skip backing up
544 any file with this bit set. The feature is enabled by setting
545 'honor no dump flag = yes' in the Options section of a FileSet.
547 kes Correct po warning message with datarootdir
548 kes Implement more code in dird.c to put configuration parsing in
549 a class rather than use globals.
550 kes Restructure SD status command for implementation of bat API
553 kes Suppress incorrect 'Will not descend from x into y' messages.
554 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
555 daemon globals used by parser.
556 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
558 kes Fix free of plugin_list when none exists.
560 ebl Apply accurate project patch.
562 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
563 on non-mempool object)
564 kes First cut of converting FD .status to work with bat API.
566 .status client=XXX header
567 .status client=XXX running
568 .status client=XXX terminated
569 kes Implement first cut of Copy Job.
570 kes Implement Catalog in Pool resource. It overrides catalog specified
571 in the Client resource.
573 kes Apply patch (with some difficulties) from Joao Henrique Freitas
574 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
576 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
577 ftruncate() actually works. In the case of some (cheap) NAS devices,
578 it does not, and so recycling NAS Volumes does not work. The code
579 simply unlink()s the file, then recreates it. This fixes bug #1011.
581 kes First incomplete cut of big malloc blocks for htable.
582 kes Tweak plugin code.
584 kes Plugin debug code + tweak a couple bat dialog layouts
586 kes Fix creating first JobMedia record during Migration to include
587 proper index. This caused slow restores of migrated jobs.
588 kes Temp fix to plugin name file_index.
589 kes Bacula backed up and restored a MySQL database.
591 kes Implement plugin restore.
592 kes Implement parsing of db_driver to give db_type index.
594 kes First cut of plugin restore code.
595 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
596 and do not strip paths on symbolic links.
597 kes Set catalog backup database and user name from values specified on
598 the ./configure line.
599 ebl Fix #1031 about wrong pool source information in job report.
602 kes Remove a redundant jcr argument to find_files, match_files, and
604 kes Implement '.status dir header|scheduled|running|terminated' that
605 prints the requested status section. With the exception of the
606 header, the other reports have fields separated by tabs (\t).
608 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
609 a resource embedded run command to find a since time if no explicit
610 since time was supplied on the command line.
611 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
612 that updates the state file at job termination time in addition to
613 when the daemon terminates.
615 kes First version where a plugin did a backup.
616 bpipe-fd.so created a backup file, wrote a test
617 string to it, and Bacua could restore this fabricated file.
619 kes Implement DB Driver = string for the DBI driver.
620 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
621 kes First cut of code for loading Win32 plugin dlls. Implement
622 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
623 and implement a dlfcn.h file based on opengroup's definitions of
626 kes First cut plugin directives.
628 kes Apply patch from bug #1049 to prevent stripping the path on a
630 kes Attempt to fix bug #1047 where stripping a path corrupts the
631 heap. Waiting for feedback.
632 kes Correct the Mount message not to suggest labeling a new tape
633 when doing a restore. Submitted by email by John Stoffel.
634 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
635 FD by using casting. Reported in bug #1042.
637 kes A bit of crypto cleanup. More later.
639 Release Version 2.2.8
641 kes Apply patch from Martin to correct bug #1040, bscan sets existing
643 kes Fixed important spelling error in doc -- bug #1045.
645 ebl Fix bextract to be able to extract non-portable Win32 data to
647 kes Move initialization of read/write res lock earlier in the code.
648 This fixes the crash with a null conf file. This fixes bug
650 kes Redefine CURES in lib/parse_conf to be URES and move it all
651 into lib/parse_conf.c -- this responds to bug #1042, but does
652 not fix it. The fix is not to compile with FORTIFY_SOURCE.
653 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
654 the trunk SVN. I don't think this was reported as a bug.
656 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
658 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
660 kes Add DataDespooling and DataCommitting status (committing is
661 the last despooling).
662 kes Finish implementation of new reservations code noted below.
664 kes Fix bsnprintf for float point numbers. I broke recently when
665 parameterizing some variables. This fixes bug #1036.
666 kes Undo recent reservations changes ... will apply them later
667 when they work better.
669 ebl Fixes #1034 which cause mysql to hang the connection after 8h
670 ebl Change default statistics target of filename.name and path.path
671 fields for PostgreSQL. This speeds lookup by indexes. Thanks
673 kes A few more tweaks to new reservation code. Make sure to clear
674 vol released flag when retaking volume. When reading label and
675 label is bad mark volume unused. When recycling, mark volume
676 unused so it can be renamed.
678 kes Fix reserve_volume() so it doesn't release a volume in use
679 (i.e. a volume entry not marked released). This should be
680 the last part needed to fix bug #1018.
682 kes Move Heartbeat documentation from Job to Director resource.
683 This fixes bug #1033.
685 kes Fix existing switch drive SD code to call autochanger to release
686 any old volume. This must be done to keep the autochanger from
687 releasing subsequently newly reserved volumes in doing a close().
688 This should fix bug #1018.
689 kes Fail if attempting to get console input in batch mode. This
690 should help fail RunScript console commands that are incomplete.
691 kes First cut implementing switch_drive() in SD (not actually called).
693 kes Implement first cut running console commands in a RunScript.
695 ebl Fixes bug #1028 where 'Selection Type' option was not usable
697 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
700 Release Version 2.2.7
702 kes Add new free_tls() entry point so that Win32 builds.
703 kes Fix compile warning in src/lib/util.c
704 kes Fix entry point for edit_job_codes() so that Win32 builds.
705 kes Fix seg fault Frank Sweetser reports in regression testing
706 on his systems. The problem was that the original author of
707 bsnprintf.c did not take into account the side effects of
708 using ++x in the argument to a #define.
709 kes Make SD protocol backward compatible with version 2.2.x.
711 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
712 because Bacula no longer restores sockets.
713 ebl Always use ignorecase fileset option on win32 FD.
715 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
716 that implements double quoting include names in conf files,
717 and also allows piping input by having the first character
718 be a vertical bar (|).
719 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
720 that implement %f in RunScripts to pass the FileSet name.
721 kes Skip leading | when lex input comes from a pipe as suggested
722 by Michael Stapelberg <michael@stapelberg.de>.
724 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
725 Nerijus Baliunas <nerijus@users.sourceforge.net>
727 kes Implement Plugin Directory and plugin events.
729 kes Implement a security enhancement: TLS authentication but no
730 encryption. Enabled by setting 'TLS Authentication = yes'.
731 Note when this is on, TLS encryption is turned OFF!
733 kes This patch corrects a problem where the maximum concurrent storage
734 jobs counter gets out of sync during restore jobs causing jobs to
735 'wait on max Storage jobs'. This patch fixes bug #1009.
737 kes This patch fixes bcopy so that it produces correct Volumes.
739 kes This patch eliminates spurious output to the console during a VerifyVolume
740 job that contains encrypted data. It fixes bug #1024.
742 kes This patch prevents the 'status dir' command from trying to use a scratch
743 volume and possibly moving it from one pool to another. This patch fixes
746 kes Add new include to postgresql.c suggested by Marc Cousins so
747 that it compiles correctly with pgre version 8.3.
749 kes Fix --archivedir addition to configure. Replace it with
750 --with-archivedir in configure.in This fixes the regression
752 kes This patch fixes bug #1012 where the job is canceled because
753 of Max Run Time exceeded when the job has not yet started.
755 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
756 one 'part' to write. Instead of each part being stored on disk,
757 written to DVD, then deleted from disk, all parts are written to disk,
758 and only the last is written and deleted from disk.
759 kes This patch fixes the status command to include the formating string for
760 JS_AttrInsterting. It fixes bug #1021.
761 kes This patch should fix the Mac OS X build problem on the latest
762 Darwin, where sys/types.h was not included correctly (apparently
763 due to a change in the Mac headers). The solution was to explicitly
764 ensure that it is defined for the ./configure.
765 This patch also has a rebuild of configure that includes the Debian
766 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
767 kes This patch should ensure that queued messages to the console are
768 displayed as soon as possible. It should fix bug 1007, but has been
769 reported not to work.
771 kes This patch fixes the infinite loop when trying to increase the
772 maximum number of volumes in a Pool during the add command.
773 This patch fixes bug #1008.
775 Release Version 2.2.6
777 db Remove extra data on estimate command in joblist for bat.
779 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
780 really change anything, but is the beginning of doing it *right*.
781 To do it completely right the LastWritten date must be passed to
782 the SD, but it is not yet done.
783 kes Minor tweaks to some bat restore SQL.
784 kes This patch fixes bug #1003 where putting the message output from
785 a Verify job into the catalog results in a recursive loop. The problem
786 seems to show up only with postgresql (to be verified).
787 kes Correct %x to %p in postgresql debug statement.
789 kes Fix bug #942 where lots of emails where generated when the heartbeat
790 interval was low and Bacula wanted a different tape from the one in
793 ebl Add new SD despooling attributes and Dir inserting attributes
794 job status codes in the catalog (Status table).
796 ebl Use qmake-qt4 instead of qmake when available (debian system).
798 kes Add a security warning to src/cats/make_catalog_backup.in indicating
799 that passing the password via the command line (arg 3) is insecure.
800 This responds to bug #990 (it doesn't fix it).
802 kes Set default debug_level to zero. This corrects bugs #991 and #993.
803 kes Fix a crash in bat when it cannot connect to the Director for example
804 if the Director is not running.
805 kes Remove redundant INDEX (JobId) from File table in the trunk.
807 kes Make explicit exception to GPL in LICENSE to permit linking
808 the Win32 FD with Microsoft VSS code.
809 kes Apply the Solaris package patch from
810 Masopust, Christian <christian.masopust@siemens.com>
811 kes Apply the patch to optionally add a timestamp in the debug output
812 submitted by Mariusz Czulada <manieq@wp.eu>.
814 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
815 backend (sql_strerror). Fixes bug #989
817 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
818 It applied with no problems.
819 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
821 kes Redirect stderror to stdin on mt status command in mtx-changer.in
822 since the status is returned on stderr on Solaris.
823 kes Activate Close button on tray-monitor window. This fixes
825 kes Check for NULL item in parse_conf.c before calling it. In the
826 case of Device, there is no item and this caused a seg fault when
827 Device appears in the conf file.
828 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
829 avoids pulling in config.h multiple times in some new code.
831 kes Fix spurious warning message printed when creating a volume with
832 a LabelFormat. This fixes bug #976.
834 Release Version 2.2.5
836 kes Add JobId in place of Job name in all the Jmsg() output.
837 kes Correct the APP_DESC for the Win32 storage service (remove an e).
839 kes Make maxvol-test and new more strict maxvol2-test work.
840 kes Print JobId in all Jmsg() job output.
842 kes Add new SD despooling attributes and Dir inserting attributes
843 job status codes. This fixes bug 961.
844 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
846 kes Fix doc issue. This fixes bug #963.
847 kes Fix listing performance problems in bat. Pointed out by
849 kes Remove old debug code.
850 kes Fix bat code that tests for Win32. This should fix bug #968
851 kes Query 5 list wrong Vol after migration. This fixes bug #960
853 ebl Fix #969 where user can't change Replace option in restore menu.
855 kes Save jcr in thread specific data (tsd) for each thread.
856 kes Make Dmsg() print JobId as -%u.
857 kes Make Jmsg, Emsg, and others automatically pickup the jobid
858 for the thread if it exists.
859 kes Remove old reservation debug jid code.
860 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
861 ebl Add an option that permit to specify spool size in job
862 definition. (Applying patches/testing/spoolsize_per_job.patch).
863 You must upgrade SD and DIR at the same time.
864 dvl Add new configuration item --archivedir
865 dvl Adjust regression tests to use tmp not /tmp. This will allow
866 multiple concurrent runs of the regression tests.
868 kes Fix race condition that drops final block written to volume.
869 This happens in rare cases with multiple simultaneous jobs
870 when the Volume fills. This fixes bug #964. May be related
871 to bug #935 and possibly #903.
872 kes Eliminate more strerror() and replace with bstrerror().
873 kes Remove BSD getopt and replace with unrestricted IBM version.
874 kes Fix Win32 build for changed calling sequences.
875 kes More tweaks to the mount volume routines to get everything
876 right. Changed variable name from find to have_vol, which is
877 much easier to understand.
878 kes Enhance btimer debug code.
880 kes Fix FD->SD authorization failure, which was due to spurious
881 wakeups from a pthread_cond_timedwait(). Simply check the
882 predicate before continuing. This fixes bug #953.
883 kes Add const char where needed (more to do). Remove temp debug code.
885 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
886 kes Don't overwrite error message in check_tables_version.
888 kes Unlock batch insert tables with same calls used elsewhere.
889 kes Allow starting 59 jobs a second.
890 kes Make SD session key more random.
891 kes Add retry for SQLite opening db if it fails. Probably helps
893 kes Suppress extra error messages during batch insert failure.
895 kes Add jcr to timer packets so if killed message can be sent to job.
896 kes Add JobId to all Dmsg() output.
897 kes Put some FD auth code on dbglvl rather than fixed.
898 kes Return insert attributes error message in db msg buffer to avoid
899 false error messages. Helps fix bug #966.
900 kes Separate batch init error messages. Probably helps fix bug #966.
901 kes Make SD code that contructs attribute insert check string lengths
903 kes If Dir gets an error during inserting attributes, cancel SD.
904 This reduces unnecessary error messages.
906 kes Correct search boolean for getting Volume info
907 ebl Cleanup batch insert code. Probably fixes bug #965.
908 kes Back out one small change to the reservation system (reserving a volume).
909 kes Rework how a Volume is mounted. It is now much more intelligent and
910 will always attempt to use any mounted volume if possible and reduces
911 calls to the Director asking about volumes.
913 kes Turn off some code when batch insert not enabled.
914 kes Edit FD name in connect error messages.
915 kes Rework the reservation system to take into account that the Director
916 might give us a Volume that is different from the current one being
917 used, and to ensure that we don't exceed Maximum Volume Jobs.
918 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
919 fatal error with multiple jobs running'
920 kes Add more debug code in reservation system.
921 kes Implement maxvol-test to check bug #947.
923 kes Add code to handle tray monitor separated from Win32 FD.
924 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
926 kes Add missed return in fixing verify bug -- trunk only.
927 ebl Fix a command parser issue causing a director segfault.
928 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
930 kes Increase the max block size to 4MB fixes bug #957.
931 kes ERABT if user sets min block size > max block size. Fixes bug #956.
932 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
933 is not properly mounted (recognized) during a poll.
934 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
935 Job that has differences reports Verify OK.
936 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
938 ebl Add an option to operate on all pools with update vol parameters.
939 This complete the project 20. Patch from Nigel Stepp.
940 ebl Add history support to bconsole when using readline.
941 Using Ctrl-D to exit doesn't update .bconsole_history
942 kes Modify new volume algorithm to use max MediaId for generating next
943 volume number rather than the count of Volumes. This should essentially
944 eliminate the failure rate if some volumes were deleted. Bug #921.
945 kes Begin implemention of Optimize Job Scheduling.
946 kes Implement restore callback that Dirk and I agreed on for bat
947 restore. This fixes bug #928. Restore of backup of zero files fails.
948 kes Fix SQL Catalog logging which broke with new db_escape_string
951 Release Version 2.2.4
953 kes Fix bacula_cats.def for new db_escape_string().
954 kes Increase size of name string when FD making connection to SD.
955 May fix bug #953. FD->SD connection failure.
957 kes Add code to help Dan debug 2drive-incremental-2disk test.
958 kes Add code to try to fix bug #908.
959 kes Add waits to multiple exit detection code to try to force pid
960 file to always be deleted.
961 kes Restore good dev.tar.gz to rescue set appropriate binary property.
963 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
964 trying to switch drives by checking for blocking before unblocking.
966 kes Cancel storage daemon in all cases where FD reports error. This
967 should fix virtually all cases of bug #920.
968 kes Fix db_escape_string() for MySQL which did not compile.
970 kes Fix error message that was clobbered when Dir tells SD it does not
971 have write permission on Volume. This should fix a minor point
972 in bug #942, but not the main problem.
973 kes Add code to cancel job in SD if FD connection fails. This should
975 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
976 dvl Pass jcr and db into db_escape_string() to enable better escaping
978 kes Fix migration code to get correct Volume name with multiple volumes
979 by skipping |. Fixes bug #936.
980 kes Implement patch supplied by Landon to fix bug #944 where using
981 TLS with bconsole uses 99+% of the CPU.
982 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
984 kes Move patches into patches directory.
986 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
989 ebl Using 'm' in bconsole will show messages like before,
990 and not memory usage.
991 kes Fix bug #935, and probably also bug #903 where files were not
992 restored. MediaId was not properly set in JobMedia record after
995 kes Suppress chown and chmod error messages if the FD is not running
998 kes Apply Martin Simmons' patch that should turn off the new API usage
999 when batch insert is turned off allowing building on older
1001 kes Add ./configure search in qwt-qt4 for qwt package
1003 kes Bacula is now free of 3rd party GPL copyrighted code!
1004 kes Remove idcache.c
1005 kes Add guid_to_name.c/h which replace idcache.
1006 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1008 ebl Detect if new PosgreSQL batch insert API is present.
1009 kes Correct incorrect mempool call causing Director crash. Occurs on
1010 systems without va_copy().
1011 sb Update spec files for 2.2.1 release
1013 kes Fix memory pool call in ua_output.c. bug #934.
1014 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1015 Add test program to fnmatch.c
1017 kes Integrate patch to README.vc8 from
1018 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1019 edit it to get it into Unix patch format.
1020 kes Implement mkpath.c to replace old FSF makepath.c
1022 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1024 Release Version 2.2.1
1026 kes Update POTFILES.in
1027 kes Cleanup a few underquoted AC_DEFUNs in configure
1028 kes Apply patch from Martin Simmons that adds a test for va_copy to
1031 kes Fix bug #921 by increasing the number of tries to create a new volume
1033 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1034 can be called multiple times. Implement a version for machines
1035 without va_copy() that gets a big buffer.
1037 kes Integrate more portable zone offset code into bsmtp.c
1038 Submitted by Attila Fülöp.
1040 kes Fix bad SD->FD return status reported by
1041 (James Harper) <james.harper@bendigoit.com.au>
1042 ebl Fix a bug in read_close_session which return random status
1043 thanks to James Harper
1045 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1046 and directory names during restore of single file/directories.
1047 kes Add sanity checks to .sql command when string is empty. Hopefully
1048 that will resolve Dirks Director crash.
1050 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1051 in the bsmtp chat subroutine when debug is >= 10.
1053 kes Fix Director crash when running bat SQL queries.
1054 kes Add David's notes on Item 8: Copy pools.
1056 kes Rework projects file to be current and ready for a vote.
1057 kes Enhance lex scanner error message.
1059 kes Tweak LICENSE file to mention BSD code.
1060 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1061 if specified on the ./configure.
1062 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1063 This class is intended to allow us to open a second bsock to the
1064 Director while in the restore subdialog.
1066 kes Fix configure to create bat Makefile before creating dependencies.
1067 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1068 kes Add a tooltip to the tray monitor.
1069 dvl Set the Director's PID file before dropping privs. This fixes
1072 kes Update AUTHORs file
1073 kes Increase the default max concurrent jobs to 20 in FD and SD to
1074 correspond with the default .conf files.
1075 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1076 some different, of the same file created by RN when porting the
1078 kes Rearrange some of the Win32 directories and the placement of the files
1080 kes Set DEVELOPER flag in version.h
1082 ========================================================================
1083 Release Version 2.2.0
1085 kes Apply a second doc patch from Marc.
1086 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1087 improves the tips section that discusses how to setup multiple
1090 kes Update bat README file.
1091 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1092 corrects a typo in the Recycle status check in db_find_next_volume().
1093 This will probably fix a number of annoying problems with multiple
1095 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1096 bnet calls -- no functionality change.
1098 kes Modify the Verify output to specify if files are missing on
1099 the Volume(s) or disk. Fixes confusion in bug #916.
1100 kes When more than one Volume is read in a migration job, the last
1101 Volume bytes reported are from the last read volume rather than
1102 the last written volume. Fixed. This fixes bug #910.
1103 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1104 It previously printed New Recyle flag is: no. This fixes bug
1107 kes Correct seg fault when switching tape drives during restore.
1108 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1109 be used until after 2.2.0 release.
1111 kes Remove fnmatch() in SD that permitted wild card specifications.
1112 This fixes bug #914.
1114 kes Fix %g in filename returned by SQL for browse tree reported by
1116 kes Fix configure so that it puts config.out in the cwd rather than
1118 kes Attempt to fix the locking problem reported by Eric in bug #906.
1119 kes Make berrno class to leave errno unchanged after constructor call.
1120 kes Make bnet_server use the heap rather than the stack to allocate
1121 its socket fd pointers to avoid a crash at termination. Problem
1122 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1124 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1125 and putting it in depkgs-qt along with Qt4.3.
1127 kes Rework code in acquire.c that switches drives for reading when
1128 the Media Type does not match. This should fix bug #906
1130 ebl Fix a director segfault during job setup #907
1131 kes Correct seg fault in postgresql when first operation returns no
1132 rows. Fixes Dirks File browser problem seg fault with bat.
1134 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1135 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1138 kes Implement PopUp YES/NO dialog for bat.
1140 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1142 kes Correct RunScript to terminate job in FD on failure.
1143 kes Change abort_on_error and AbortJobOnError to fail_on_error
1144 and FailJobOnError in RunScripts.
1145 kes Minor tweaks of code formating in RunScripts, principally to
1146 avoid depassing 80 columns.
1148 kes Eliminate one #ifdef Win32 in bsmtp
1149 kes Implement grow tool to grow a file for testing very large databases.
1150 kes Add big-vol-test to test Bacula seeking with > 5GB.
1153 kes Modify find_next_volume() to return all values in Media record.
1154 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1158 kes Update Release notes
1160 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1161 Warning, in previous beta version, all media get from scratch keep their
1164 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1165 This should fix bug #842. Made a note to look at removing the temp
1166 files at the end of the install.
1167 kes Add ability to mount and unmount a file device providing it is
1168 marked as being removable and has the appropriate mount and unmount
1169 commands defined in the Device resource. This fixes bug #830.
1170 kes When applying a storage override, release all previous storage
1171 definitions rather than just prepending the new storage.
1172 This should prevent a good deal of confusion.
1174 kes Implement ./configure search for qwt libraries.
1176 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1177 Win32 FD. This should fix bug #893.
1178 kes Remove an unnecessary beep in Win32 init code.
1179 kes Update copyright dates in Win32 executable about boxes.
1180 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1181 code with a BSD getopt.c and getopt.h.
1182 kes Remove sched.h from the Win32 compat directory -- not used.
1183 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1184 need to shut it down, do it through the services panel or the command
1186 kes Remove some inappropriate Bacula FSFE copyrights.
1187 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1188 kes Fix regress config non-portable test as pointed out by
1189 Florian Heigl <florian.heigl@gmail.com>
1190 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1191 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1193 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1194 Reported by Frank Sweetser.
1198 kes Fix client-only build.
1199 kes Integrate client-only fixes for bsys (initgroups) and conio from
1200 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1201 kes Make arguments to get_scratch_volume() in same order as other
1203 kes Rework the prune_volumes() subroutine so that after purging and
1204 no volume found in desired pool, it will check for a scratch
1205 volume. This prevents recycling the whole scratch pool.
1206 kes Add code to status storage to print boffset_t (largefile support).
1208 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1209 kes You now need a --with-qwt=<dir> to be able to build bat.
1210 kes Update src/win32/cats/bacula_cats.def to include the new
1211 db_get_query_dbids() call on Win32.
1213 kes Correct a problem when selecting a scratch volume and moving
1214 it to another pool that lost some columns.
1215 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1216 kes Enhance Autochanger error messages to include Volume and device name.
1217 kes Rework prune_volumes() code to take account of InChanger flag,
1218 and to handle recycling volumes going to the Scratch pool and
1219 current pool because the RecyclePool directive.
1220 kes Implement a better and more efficient db_get_query_dbids() to
1221 handle creating and passing back a list of DBIds.
1225 kes Start work on new more efficient DBId subroutine. First use
1226 will be for recycling volume to Scratch inchanger.
1227 kes Increase number of JobIds in pruning from 1000 to 10000.
1228 This to be replaced by above routine.
1229 kes Begin implementation of building Qt4 on Win32.
1230 kes Correct typo in fix I added for bad TLS shutdown.
1231 kes Pull 2.0.3 patches into patches directory.
1232 kes Update Release notes. Include qt-console in line count.
1233 kes Update Projects file.
1235 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1236 bug in migration code where a job that spanned two volumes
1239 kes Implement new BST_DESPOOLING blocked state. Change from locking
1240 during despooling in SD to blocking. This means that other threads
1241 can work with the device structure, in particular the reservations
1242 system while despooling.
1244 kes Fix return in reservation message queue that missed clearing
1245 the jcr lock (implemented 26Jun07 below).
1246 kes Rename a number of dev methods to make locking function names
1248 kes Document locking in lock.c. Move lock structures to new file
1251 kes Move reservations message lock to lock jcr only this
1253 kes Move main SD locking code into lock.c (new file).
1254 kes Update Win32 build to include lock.c
1258 kes Dirk committed the qwt library code for drawing graphs in bat.
1259 kes Tweak install of qwt so that it is integrated with ./configure.
1261 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1262 out by Eric (my typo).
1263 ebl Fix configure.in to get batch mode enable
1264 kes Return correct string from authenticate.cpp in bat when connecting
1266 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1267 spurious line drops when using TLS.
1268 kes Do not file reparse points when restoring a file that already
1271 kes Implement Windows reparse points -- similar to directories, but
1272 we do not descend into it. This is a first cut. They seem to
1273 be backed up, but restore is not yet tested.
1274 kes Remove restore_blocking in tls code when shutting a socket to leave
1275 it in blocking mode. Hopefully this will fix the encryption bug
1276 reported by Frank Sweetser.
1277 kes When opening a file for backup, tell the OS that we are going to
1278 read it sequentially -- optimization.
1279 kes Change variable names in authenticate_director() to not conflict
1280 with member names in bat. Caused great confusion with compiler,
1283 kes Queue openssl error messages in case of comm problem.
1284 kes Do shutdown() call if socket terminated.
1285 kes Remove some duplicated code in tls.c
1286 kes Move more of the bsock member variables into private and access
1288 kes Add Frank Sweetser's tls-test to the regression suite.
1290 kes Add Swedish sv.po file
1292 kes Don't print clock skew message in FD if less than 3 seconds diff.
1293 kes Add a bit of VSS info to status client.
1294 kes Implement a first cut of Vista VSS, using Win2003 code.
1296 Release: 2.1.20 beta
1298 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1299 loaded tape but uses first drive).
1300 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1301 This was indeed a Win32 issue.
1303 kes Simplify search of autochanger for in-use Volume.
1304 kes Fix exit condition of check for in-use volume. kes Remove
1305 inappropriate my_postgresql_free_result() in db_close()
1307 kes Fix bad return in FD when encryption signature not found.
1308 Probably caused a crash.
1309 kes Inhibit missing encryption signature error messages for
1310 file types where no signature computed.
1311 kes Correct inverted check on autochanger in reservation system.
1312 kes Tweak debug code in autochanger reservation.
1314 kes Add some additional locking in the cats directory in subroutines
1315 that modify packet variables called from batch insert.
1316 kes Rework how dcrs are allocated. new_dcr() can now be called
1317 with an existing pointer, and it will simply clean it up.
1318 This allows the reservation system to test various different
1319 devices, and will permit easy device changes.
1320 kes A bunch of changes all over to handle new new_dcr() calling
1322 kes Work more on the Volume management in the SD. Remember Volumes
1323 for tape drives and for autochangers (even virtual disk changers).
1324 kes When looking at the Volume list to reserve a drive, handle
1325 autochanger names correctly by interating through the changer
1326 devices. Also call the Director to see if a Volume is suitable
1327 for the current job.
1328 kes Fix some bugs in bscan. Make sure all media records are written.
1329 Make sure that valid JobMedia records are written for disk files.
1330 Previously they were completely wrong.
1331 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1332 that the URLs don't change and so that the developers will all
1333 work off the same copy. Rebuild from scrach.
1334 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1336 Release: 2.1.18 beta
1338 kes Fix seg fault in FD from incorrect digest size.
1339 kes Fix argument to non-OpenSSL crypto.c subroutine.
1341 Release: 2.1.16 beta
1343 kes Remove a few malloc()s from the encryption code.
1344 kes Use the class calls to bsock in filed/backup.c and restore.c in
1345 place of the old bnet_xxx code.
1346 kes Implement code that does an on the fly calculation of the
1347 signing digest during restore of encrypted files. It makes
1348 a best guess at the algorithm, and if it is not correct, will
1349 then revert to the old code which reads the file after it is
1351 kes Implement at least one missing crypto stream in stream_to_ascii()
1352 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1353 #877 where a reload with bad syntax causes Dir to exit.
1355 Cut: 2.1.14 beta (not released)
1357 kes Do not free a volume on a tape drive until another volume is
1358 mounted and read, or the autochanger unloads the volume.
1359 This should help the SD re-use volumes that are already mounted,
1360 and should fix bug #886.
1361 kes Apply patch from user brettedgar that allows gnome2-console include
1362 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1363 kes Apply patch from Lucien Weller that fixes day of week calculation
1364 because of DST flag problem. Fixes bug #887.
1366 kes Move find_next_appendable_volume() to after acquiring a valid device
1367 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1369 kes Unable to reproduce bug 872. However added additional testing for
1371 kes Bug #874 resolved by documenting SQLite limitations.
1372 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1373 kes Bug #881 resolved by removing typo in mtx-changer script.
1374 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1375 approval. Added a link to the wiki on the web page, and implemented
1376 a backup from http://paramount.ind.wpi.edu
1378 kes Fix update allfrompool to pass pool name.
1380 kes Convert to pure GPL v2 license.
1381 kes Fix sscanf problems reported by Peter Buschman that caused
1382 a bus error on Solaris.
1383 kes Rework (simplify) the select prompt in bat.
1384 kes Move get_jobid_from_tid() into lib and create a
1386 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1387 should definitely fix the problem of lost error messages in the
1389 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1390 kes Eliminate tcpd.h from the project. Enclose the #include from the
1391 library with extern C ...
1392 kes Add print of signal name when a signal is trapped.
1394 Release: 2.1.12 beta
1396 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1398 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1399 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1400 makes SQLit3 run 30 times faster, though a bit less safe.
1401 kes Implement --with-batch-insert in configure and detection of thread
1402 safe libraries. It is on by default, but turned off if no thread
1403 safe library (e.g. SQLite 2) is available.
1405 kes Fix Bacula PostgreSQL buffer overruns.
1406 kes Do better checking for NULL results returned from PostgreSQL;
1407 implement retry for failed queries; clear results buffer after
1408 failed query. Hopefully this will correct the PostgreSQL failures.
1410 kes Implement algorithm to handle only one appendable volume with
1411 Prefer Mounted Volumes = no.
1412 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1413 returned from a query.
1414 kes Make volume lock recursive.
1415 kes Implement an additional volume reservation algorithm that
1416 starts by considering all reserved volumes then uses the
1417 old brute force algorithm of searching the resources to
1418 find a suitable device.
1419 kes Add new reservations debug code and refine the old code.
1420 kes Update the win32/dll/bacula.defs file.
1422 kes Tweak reservations algorithm to permit a few more cases, i.e.
1423 volume reserved, but on different drive, ...
1424 kes Enhance SD status to include Pool and Media Type for drive in a
1425 more readable format (a bit longer).
1426 kes Fix PostgreSQL double free.
1428 kes Minor refactoring of restore decryption code.
1429 kes Add code to smartall.c to detect double free of a buffer.
1431 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1432 so that bsmtp will create a correct email address (mailbox only).
1433 kes Modify 'memory' command so that the buffers are listed as 'In use'
1434 to avoid confusion with Orphaned buffers.
1435 kes I reworked the OpenSSL include/lib flags to be handled in
1436 the standard Bacula way, which should fix bug #863 concerning
1437 non-standard OpenSSL libraries.
1439 kes Implement Help Browser window for bat.
1440 kes Fix reload bug that reset StorageId to zero.
1442 kes Fix TLS #ifdefing when TLS turned off.
1443 kes Ensure that when labelling a tape with Slot=0 that InChanger
1445 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1447 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1448 add DISTINCT (required by PostgreSQL).
1449 kes Implement BSOCK authenticate_director() method. Eventually will
1450 authenicate all daemons.
1451 kes Move several more functions into the BSOCK class.
1453 kes Add code to tell the OS that we no longer need a cached
1454 file that we were reading. In findlib/bfile.c. Also,
1455 only cache files that we are reading. Thanks to
1456 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1457 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1458 kes Implement script to automatically generate cats and dll .def
1459 files for Win32 dll.
1460 kes Update README.mingw32 to include new .def file generation.
1461 kes Correct typo in UTF-8 error message as reported by:
1462 jhernandez <julianhernandez@gmail.com>
1463 kes Add additional sm_check() code on debug level 1.
1464 kes Set default debug level to 1.
1465 kes Trap SIGABRT in attempt to get traceback.
1467 kes Reduce bat connect timeout from 30 to 15 seconds.
1468 kes More restructuring and implementing BSOCK class in place of
1470 kes Remove a few unnecessary malloc() tests in crypto code.
1471 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1472 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1473 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1475 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1477 kes Fix Verify InitCatalog. The attributes were not pointing to the
1478 correct saved location.
1479 kes Implement message callback so that GUI is sure to get all
1480 daemon messages. Currently displayed in a dialog in bat.
1481 kes Ignore SIGUSR2 (Bacula timer) in bat.
1482 kes Apply regress patch from bug #859 to allow regress to work
1483 with Solaris compiler.
1485 kes Begin adding TLS support to bat.
1486 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1487 clean up lex.c and make it more readable.
1489 kes Move more bnet functions into the BSOCK class.
1490 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1491 kes Complete change of berrno strerror() method to bstrerror()
1493 Release: 2.1.10 beta
1495 kes Cleanup incorrect email addresses in bsmtp.
1496 kes Make bat display initial messages rather than discard them.
1498 kes First cut of adding .mod to the run command.
1499 kes Implement auto display of messages in bat.
1500 kes Enhanced preferences to allow all Bacula output to be
1503 kes Try to make bsmtp date routines more generic.
1504 kes Fixed bug #856 autochanger documentation.
1505 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1506 kes Add new cats entry point so Win32 builds.
1508 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1510 kes Do better checking for the MySQL 64 bit libraries looking for both
1511 .a and .so libraries.
1512 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1513 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1514 kes Require the thread safe version of MySQL during configure. Thanks
1515 to Andre Noll for pointing this out.
1516 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1517 continuing in migration code.
1518 kes Apply implementation of tray-monitor font derived from gnome-console
1519 submitted by Andreas Piesk <a.piesk@gmx.net>
1521 kes Eliminate important memory loss in SQLite
1522 kes Fixed the batch insert MySQL thread specific data that was not
1523 being freed. See cats/mysql.c:db_thread_cleanup().
1524 kes Fix restore before command.
1525 kes Convert old hdr.name to name() in a few places.
1526 kes Implement update jobid command.
1527 kes Return all time_t dates in db_get_job_record()
1528 kes Stop watchdog in SD earlier.
1529 kes Put Pool just after Storage in please mount message.
1530 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1533 kes Update the po files.
1534 kes Fix Verify InitCatalog by making it cache attributes.
1536 kes Change name bacula-bat to bat for man 1 page to correspond to
1538 kes Check for client and store NULL pointers in status command. This
1540 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1541 kes Fix sign extended editing of %p.
1542 kes Clean out a little old #ifdefing in cats/mysql.c
1544 kes If time diff between DIR and FD is more than 600 seconds convert
1545 INFO message to WARNING.
1546 kes Implement heap size display in status for all daemons.
1547 kes Attempt to fix MySQL db open memory loss (not successfull).
1548 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1549 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1550 Query. This looks like a MySQL but but by doing extra releases,
1551 the memory goes away. This should fix bug #847.
1553 kes When backup fails, cancel SD before waiting for sd termination.
1554 kes If SD is waiting for FD to connect during cancel, wake up the
1556 kes Fix fsf code so that errno is correctly reported.
1557 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1559 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1560 so that Bacula doesn't later stumble into a seg fault.
1561 kes Use the term Restore Client in the restore Job report.
1562 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1563 the original job's FileSetId.
1564 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1565 spooling in migration jobs. Not yet tested.
1566 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1567 reading conf file from a pipe. However, do it with open_bpipe()
1568 rather than popen. Not yet tested.
1570 kes Fix an ugly bug where the VolCatBytes were getting updated
1572 kes Implement bconsole memory command that prints current memory
1573 usage, plus smartalloc dump.
1574 kes Clarify some error messages in backup, admin, and migrate.
1575 kes Shrink label dialog to smaller size.
1576 kes Invert Cancel OK buttons on restore to be OK Cancel.
1577 kes More strerror() to bstrerror() conversions.
1579 kes Start implementing bstrerror() in place of strerror().
1580 kes Stripping path -- seems to work.
1582 kes Prevent door and port files from being restored (mostly
1584 kes Free an unreleased buffer in compat code.
1585 kes Change console Job name from *Console* to -Console- to eliminate
1586 Win32 filename problems. Put Win32 path separator when creating
1587 Console file. This fixes bug #846.
1588 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1590 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1592 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1593 to force Win32 error message.
1595 kes First cut strip path. The data should be passed to the FD,
1596 but nothing is done with it yet.
1597 kes Enhance the digest and signature routines in the crypto
1598 library to accept a JCR and to use it to print error messages
1599 so that they will go in the Job report rather than the daemon's
1601 kes Simplify some of the verify signature code.
1602 kes Simplify a few of the alternative returns in the signature
1605 ebl Use only POSIX regex instead of GNU regex in breg.c for
1606 File relocation. It fix broken freebsd compilation.
1607 kes Convert all other Dir files to use new ua class message
1609 kes Tentative fix for missing digest signature in bug 807.
1610 kes Correct handle problem in new win32_ftruncate routine.
1611 kes Convert ua_purge.c and ua_update.c to use new ua class
1612 message routines for bat.
1614 kes Correct incorrect installation of LICENSE in Win32 installer.
1615 kes Display LICENSE at the beginning of the Win32 install.
1616 kes Attempt to correct the need for the png files to be installed
1618 kes Reapply my bat.conf install script in qt-console. I think I
1619 editted bat.pro instead of bat.pro.in and it was lost.
1620 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1621 the /var/lock/subsys for subsysdir. Also corrects typos in the
1624 kes First cut update job.
1625 kes Correct configure to include qmake of src/qt-console directory.
1627 kes Make restore job yes/mod/no print in one command so GUI works.
1628 kes First cut implementing backup and restore client.
1629 kes Correct editing in Verify output that caused a seg fault.
1631 kes Insure that bat.conf is not overwritten during installation.
1632 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1633 while I was implementing migration in March 2006 !
1635 ebl Cleanup file relocation, using char *RegexWhere instead of
1636 char *where + bool where_use_regexp
1637 kes Update some manpages and add bat manpage.
1638 kes Make a first cut at converting bacula.spec.in for bwx-console
1640 kes Apply patch from John Goerzen to add hostname as fourth argument
1641 to make_catalog_backup script.
1642 kes Fix typos I introduced into bsmtp.c
1643 kes Make pm_strxxx() routines handle input of NULL pointer. This
1644 is to protect from NULL pointers returned from SQL databases.
1645 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1646 kes Add more debug to FIFO code -- fix fifo regression test.
1648 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1649 kes Add thread timer to bnet_connect() to break from OS if wait time
1652 kes Update Win32 build to include new files, new symbols, and
1654 kes Implement socket level heartbeat (tcp_keepidle)
1655 ebl Commit File relocation patch
1656 kes Make bat have 'make install' target.
1657 kes Warn during install if old gnome-console binary found.
1658 kes Warn during install if old wx-console binary found.
1659 kes Add -8 option to bsmtp command line to add content type utf-8.
1660 Fixes bug #809. (Character coding problem in bsmtp).
1661 kes If < is found in target (from, to, cc) then do not enclose the
1662 target in < > in bsmtp. Fixes bug #772 (malformed address).
1663 kes When printing certain items in dbcheck, stop after 300000.
1664 Fixes bug #822. (dbcheck loops).
1665 kes Incorrect status in Dir after waiting for mount with poll set.
1668 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1670 kes Print waiting to reserve a device every 5 mins.
1672 kes Don't call close_part in label.c if tape and relabel.
1673 kes Don't free volume if busy in close() -- should help with
1675 ebl Fix #824 RunScript bug (After script could be execute twice)
1676 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1677 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1678 Add a regression script to test RunScript
1680 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1683 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1684 deprecated. No additional bugs will be fixed, and they will be dropped
1685 in a future release (probably 2.4.0).
1686 kes Change name of wx-console to bwx-console to make it more Bacula
1688 kes Change the name of gnome-console to bgnome-console to make it
1691 kes Some time in March, a Feature Request with patch from Jorj Bauer
1692 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1694 The ability for the director to validate a Client (FD) CN against
1695 an arbitrary set of patterns rather than the hostname, with
1696 A new 'TLS Allowed CN' set of directives which are implemented
1697 in the Client resource. Then pattern matching is used in place
1698 of hostname matching against the Certificate's CN. As an example, we
1699 have certificates which (a) use a local CA, and (b) have a CN of the
1701 kes Add new/changed entry points to Win32 build
1702 kes Create unaccepted-projects for projects that are not accepted.
1703 kes Simplify locking in the reservations system.
1704 kes Add more debug code in reservations.
1705 kes Make sure error condition on reserving a volume is handled correctly.
1706 kes Correct handling of volume_in_use.
1707 kes Correct handling of initializing a device.
1708 kes Move handling of broadcasting releasing a device into release_device().
1709 kes Correct attaching dcr to dev so that it is only done if device
1710 is properly initiated.
1712 kes Locking debug level tweaks in SD.
1713 kes Tweak new Volume code.
1715 kes Add exec external-command [wait-seconds] to bconsole. This
1716 executes the external-command. Note! normally external-command
1717 should be enclosed in double quotes.
1718 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1719 it should normally be off in a production system.
1721 kes Implement die command for SD so that we can force it to dump.
1722 kes Implement SD lock debug code.
1723 kes Implement new algorithm for keeping Volume list in SD. It
1724 is now owned by the device.
1726 kes Implement new code for freeing in use volumes that should
1727 resolve if not all, some of the problems of multiple drive
1728 tape conflicts described in bug 801.
1730 kes Fix gui/bacula-web/images files in svn.
1731 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1733 ebl Fix a bug in batch mode (in string escape)
1734 kes Correct migration prune SQL typo that crept in in a
1735 recent 2.1.x change.
1737 kes Move bnet_despool() into class in bsock.c
1738 kes Modify job report to include director name and Build OS.
1739 kes Move drop root privilege and check_catalog() before fork.
1740 kes Add update database scripts (version 9 to 10) to updatedb directory.
1742 ebl Check size and age of each file after its backup to see if
1743 it has changed during backup, if 'checkfilechanges' is set.
1744 The FD will do an extra check (stat(2)) after
1745 each file backup. mtime, ctime and size are compared with
1746 'before backup' information. If time or size mismatch, an
1747 error message will be generated. You must upgrade FD to use it.
1749 kes Make database name and user configurable
1750 --with-db-name=xxx --with-db-user=xxx
1751 kes Add back database type to message.c for debugging.
1753 kes Implement dir_sql() which issues an SQL query.
1754 kes Modify bat medialist to use dir_sql() and do some minor C++
1755 formatting as well as eliminating a number of pointers, simplifing
1758 kes Fix some of the mtx-changer grep commands for tape label readers.
1759 kes Convert a number of bsendmsg into the appropriate send/warning/error
1760 message class calls.
1761 kes Suppress the using database message in the .sql command.
1762 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1764 kes Add context menu for floating a window.
1765 kes Some minor cleanup and name changes in qt-console
1766 kes Add doing mt setblk 0 in Win32 mtx-changer.
1767 kes Apply Martin's bug fix to move definition of ENODATA for
1769 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1770 sqlite2 and sqlite3.
1772 kes More pruning cleanup.
1773 kes Turn on wait_for_drive by default in mtx-changer.
1774 kes Turn on Batch insert code by default as it now passes regression.
1775 kes Add ./configure --enable-bat to enable building of Bat.
1776 No install yet though.
1778 kes Implement a new .sql command for bat.
1779 kes Implement code to turn off pruning in obtaining the next volume.
1780 Pruning is turned off for the status dir command, but turned on
1781 for SD requests and for the list nextvolume command.
1783 kes Correct Qmsg() that was not updated correctly when committing a
1784 previous change (probably the recent TLS patch).
1786 kes Write new subroutine is_volume_purged() that explicitly checks
1787 if the Volume is purged, and if so marks it as such. This should
1788 resolve problems reported about needing to mount twice to recycle
1790 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1791 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1792 amount of duplicated code.
1793 kes Do volume pruning only for the Media Type desired (reduces pruning time
1794 if multiple Media Types are in the same pool).
1795 kes Implement more detailed info in the Job report for the Bacula version
1797 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1799 ebl Add bbatch tool to bench database and insert mode.
1800 Fix sql quote stuff in batch mode
1801 Fix sql stuff for mysql
1803 kes Correct problems with am/pm scheduling. Fixes bug #808.
1804 kes Implement new prunning code that prunes up to 1000 jobs at
1805 the same time. The same technique can be applied to a number
1806 of other prune/purge subroutines.
1807 kes Add an insanity check when starting a new tape job to ensure
1808 that the tape position has not been changed. If so fail the
1810 kes Fix Win32 build for dlls to add the folllowing:
1811 src/lib/bsock.c -- new file with new entry points
1812 src/lib/dlist.c -- new entry points
1813 src/cats/sql_create.c -- new entry point
1814 src/cats/sql_cmds.c -- new DATA item exported
1816 ebl batch mode cleanup bscan-test is ok now.
1817 kes Implement SD code to check length of disk volume before appending.
1819 kes Correct return status on db_batch... routines.
1820 kes Add call to db_write_batch_file_records() to migration code.
1821 ebl Fix AfterJob timing
1822 kes Move the checking of the database in initializion of the Director
1823 to after we drop privileges. This avoids the need for both root
1824 and bacula access to the DB.
1825 kes Correct a misplaced variable definition in src/filed/backup.c
1826 kes Correct how the new batch insert db_create_attributes_record()
1827 uses the arguments. Caused a seg fault in bscan.
1828 kes Implement lock() and unlock() methods in DEVICE class.
1829 Implement block() and set_block(xx) methods in DEVICE class.
1830 kes Modify bnet_connect() so that it uses time() to check for the
1831 wait time expiring (on some OSes, some system calls may not
1832 return immediately).
1833 kes Modify Verify to obtain the previous JobId when it is actually
1834 running rather than at schedule time (as it was in 1.38.x).
1835 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1837 kes When checking pid in pid file, continue running if the pid is
1838 the same as ours. This occurs on IRIX after a system crash.
1841 kes Extend new GUI API.
1842 kes Make the ua structure a class, and implement send_msg(),
1843 error_msg(), warning_msg(), and info_msg().
1845 kes Apply fix from for building wx-console on the Mac from
1847 kes Implement new select mechanism for GUI programs.
1848 kes Reorganize initialization of stackedWidgets in bat.
1850 kes Add updated nagios plugin supplied by Christian Masopust.
1852 kes More bat implementation.
1853 kes File migrate bug with Pool Occupancy using mediaid instead
1854 of jobids. Fixes bug #795.
1855 kes Fix orphaned buffers in filed backup and verify due to
1856 crypto buffers not freed during errors. Fixes bug #789.
1857 kes Extend new GUI api code to tree commands.
1858 kes Ensure that tree and dot commands check console ACLs.
1859 kes Permit marking directory with trailing slash.
1860 kes Allow 20 console connections (instead of only 10).
1862 kes Add smartctl call to bacula-sd.conf as an example of getting
1865 kes Modify jobq.c to let simultaneous restore jobs run. This may
1866 cause them to fail if they cannot get a drive.
1867 kes Add Client Connect Wait to Storage daemon to permit users to
1868 modify the time the SD waits for a FD connection.
1870 kes Correct virtual changer check which was backwards. This caused
1871 volumes to be unloaded into slots already occupied.
1873 kes Apply Command ACL filter to JobId list in restore command.
1874 kes Correct typeo in var.c patch.
1876 kes Don't let Bacula prune File or Job records for the current Job.
1877 kes Fix variable substitution pad + inc bug reported (with patch)
1880 kes Correct SQLite log table index as reported by Luca Berra.
1882 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1884 kes Begin implementing new comm signals for API.
1885 kes Fix a few places in lib/message.c where the open fd may
1887 kes Continue implementing lib/bsock.c (real class). Make jcr,
1888 who, host, and port private. There are new methods to access
1889 them for non-class use. This required touching a number of files.
1891 kes Add LANG=C to autoconf/randpass so it works with languages other
1892 than English. Fixes bug #788.
1894 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1896 You will not be able to generate Include/Exclude list any more.
1897 It will be fixed soon.
1898 If you want to use this, you can apply
1899 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1901 kes Restore of sockets created false error messages because Bacula
1902 no longer restores sockets, but the code was still trying to
1903 set the attributes on a non-existent file. Reported by a user.
1904 ebl finish RecyclePool feature
1905 Media will takes Pool.RecyclePool
1906 when moving from Scratch to a Pool or when user will do
1907 update volume=xxx frompool
1908 To use it, add RecyclePool = aPool to your Pool resource
1911 RecyclePool = Scratch
1915 kes Expand new BSOCK class adding signal() and new BNET signals.
1916 kes Begin enhancing the dot commands adding a new API function
1917 that returns more information and will make it easier
1918 to interface to the Director from a program.
1920 kes Make DEVICE fd private. Its new name is m_fd, and can be
1921 obtained with dev->fd() outside the class. This is the
1922 first of many DEVICE members to be made private.
1923 kes Implement Michael Renner's idea on having a virtual disk
1924 changer. I made some minor modifications (e.g. I did not
1925 implement the Virtual Changer directive, but simply set
1926 the Changer Command to an empty string.
1928 kes Implement a BSOCK send() method that writes the whole record
1929 in a single write() request rather than in two.
1930 ebl add update volume=xxx recyclepool=yyyy
1931 volume takes recyclepool from pool when using update volume=xxx from pool
1933 kes Fix encryption deblocking bug, which caused some restored files
1934 to be truncated. This fixes bug #763.
1935 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1936 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1938 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1939 ebl Use btime_t instead of uint64_t in media patch.
1941 kes Optimize the use of the database a bit in the Status dir command.
1942 Only open it when needed, ensure that if any previous database
1943 was opened, it is closed.
1945 kes Correct VolCatBytes bug from media patch.
1946 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1947 in the case of orphaned records.
1948 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1949 and File records in 300K chunks to be more efficient. This
1950 idea came from Juan Luis Frances (if I remember right).
1951 kes Apply Eric's scratch patch that moves a purged Volume to
1952 the RecyclePool. Question: how is RecyclePool set? what
1953 happens to the ScratchPool?
1954 kes Apply Eric's media patch that collects read/write media
1955 times as well as byte counts. This patch requires a
1956 simultaneous upgrade of the DIR and SD. Note, there
1957 should be some way to turn off timing. I'm not sure
1958 times are in Bacula units.
1959 kes Apply Eric's batch-insert patch.
1961 kes Update projects list.
1963 kes Implement Include/Exclude file lists in FD as dlists using
1964 the new dlistString class. This permits efficiently having
1965 large include/exclude lists and completes project Item 25.
1966 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1967 console is authorized to cancel the job. This fixes bug
1969 kes Modify SD so that the VolCatJobs medium record is updated
1970 at the beginning of a Job rather than the end. This
1971 fixes bug #775 where exceeding MaxVolJobs caused jobs
1973 kes Added a mutex around getting and setting Volume information
1974 so that multiple simultaneous jobs will single thread.
1976 Switch to using Subversion
1977 kes Remove src/pygtk-console/ from configure
1979 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1980 plus the entrypoints.
1981 kes Apply patch supplied that corrects debug print
1982 in canceling jobs for max run time. Supplied as
1983 part of bug #621, which was previously fixed.
1985 kes Test on job_canceled() and sd_msg_thread_done inside
1986 loop starting the message thread to avoid a race condition.
1988 kes Remove rl_catch_signal from console.c as it conflicted
1989 with the header definition. Fixes bug #765.
1990 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1992 kes Clarify some stored/acquire messages to indicate if the
1993 problem is with read or append.
1995 kes Fix memory leak with storage ids in cats/sql_get.c
1996 kes Terminate watchdog earlier to avoid reference to released
1997 memory -- reported by Jason Austin.
1998 kes Move closing the database from jobq.c to the director daemon
1999 termination routine. This fixes memory leaks for shadow jobs
2000 (i.e. migration jobs).
2001 kes Free up the unique jobid chain items in migrate.c. This fixes
2002 a memory leak problem.
2003 kes Convert some ugly looking for statements to use foreach_alist
2004 in findlib/find.c. This will facilitate converting the structures
2005 to use dlist (for large include/exclude lists).
2006 kes Fix a bug in the btree.c and btree.h routines, then rename them
2007 rblist and add them to be built in src/lib. Include some new
2008 methods written by Rudolf Cejka that make the code more readable
2009 (hides some of the ugly casting).
2010 kes Add set_next() and set_prev() methods which make the code much more
2011 readable. Also add a new dlistString class that facilitates storing
2012 strings in dlists. To be used in the large include/exclude lists.
2013 kes Make some trivial modifications to lib/tree.h that use rblist
2014 rather than dlist for storing the tree links. This was suggested
2015 by Rudolf Cejka. The result of this is that the restore tree now
2016 uses red-black binary trees rather than simple linked lists. This
2017 should give rather dramatic speed improvements for directories
2018 contining large numbers of directories/files (more than 10000).
2020 kes Fix maxruntime bug #621.
2022 ebl Implement the include JobID in spool file name project.
2023 kes Reorder projects file in order determined by Jan 2007 vote.
2024 kes Implement item #12 on project list -- quick release of FD by
2026 kes Fix open of SQLite3 db where user does not have write permission
2027 so that DIR does not crash. Fixes bug #761.
2029 kes Add back missing @ in Win32 Makefile.
2030 kes Change 'Device not configured to autolabel' from INFO
2032 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2033 which should restart an indefinite # of times.
2034 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2035 other DIR specifications.
2037 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2038 Fix path quoting in SQLite scripts.
2039 Fix problems with SHGetFolderPath.
2041 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2043 kes Fix Job restart on error bug that promotes an Inc to a Full
2044 backup. This should fix bug #755.
2045 kes Add qt-console and first cut of code.
2049 kes Fix Bacula->Documentation link on Win32 to point to index.html
2050 instead of bacula.html. Fixed bug #750.
2051 kes Return JobId in db_get_job_record() when JobId==0. This should
2053 kes Do not release source pointers when restarting a failed job.
2055 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2056 This *should* fix bug #747.
2057 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2060 kes Modify USTORE constructor to set an empty store_source string,
2061 and don't copy the store_source string in a cancel. Hopefully
2062 this will fix Arno's seg fault, bug #744.
2063 kes Add back code to disable conio in configure. Fixes bug #743.
2064 kes Correct the Options scanner in the FD to correctly handle
2065 SHA1 option, which was eating the next option. Reported by
2067 kes Add code to indicate when the SD is spooling, spool wait, and
2068 despooling as requested by Alan Brown.
2070 Version 2.0.0 released: 4 January 2007