1 Technical notes on version 2.5
5 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
6 examples/database/dbcheck.sql
7 enhancement to wait command: wait mount ...
9 filepattern (restore with regex in bsr)
14 ebl Fix #1173 where prune_volume() returns a volume from the scratch.
16 kes Remove jobq.c constraint that read and write SD must be
17 different. This may lead to more deadlocks in the SD,
18 but they should be resolved there.
19 kes Ensure that job report is always printed even if job is failed
21 kes Don't print job report twice for failed VBackup jobs.
23 kes Fix editing of retention time difference to use 64 bit
24 int instead of 64 bit unsigned. This should permit very
25 long retention periods.
26 kes Implement code to prohibit a write job from appending to a
27 Volume that will be used for a read operation. This is
28 new code and could possibly cause some conflicts.
30 kes Integrate James Harper's Exchange Win32 plugin patch.
31 kes Apply patch from Marco van Wieringen that implements the new
32 Solaris libsec interface for ACLs so that Bacula can save and
33 restore both the new ACLs and old ACLs.
34 kes Marco's patch also corrects the file dependency generation code
35 so that it works properly both with shared libraries and static
37 kes Marco's patch also includes a small cleanup of the cats Makefile
38 to remove some references to non-existent files.
40 kes Modify win32 Makefiles to use full paths in most cases.
41 In particular add MAINDIR environment variable that points
42 to the main Bacula source directory.
44 kes Add read volume list code to SD -- not yet used.
45 kes Add James' binutils patch
46 kes Split volume management code out of src/stored/reserve.c into
48 kes Modify configure to do an automatic make clean. This ensures
49 that any changes to ./configure options are handled correctly.
51 Beta version 2.5.16 release:
53 ebl Rename JobStat table to JobHistory
54 kes Ensure that only normally terminated jobs are migrated.
56 kes Add Makefile dependency when using LIBTOOL_LINK so that any
57 change in ./configure options will be accounted for.
59 kes Fix typo in the ACL patch that I overlooked.
60 kes Apply Marco's libtool include patch.
62 kes Apply Bastian Friedrich's ACL patch to eliminate ACL
63 errors during restore.
64 kes Minor cleanup of create_restore_volume_list() code.
65 kes Fix typo in console Makefile.in
67 ebl Fix #1110 about RunScript that can't execute a script with
68 Unicode caracters in the path.
70 kes Apply tray-monitor patch from Bastian Friedrich to make it
73 kes Apply cleanup patch from Marco
74 kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
75 that implements libtool to create shared objects out of
77 kes Fix tray-monitor so it will speak to new FD.
78 ebl Fix bug with ansi label when volume name length < 6
79 ebl Fix segfault in debug level > 50 with btape.
80 ebl Remove warning message in btape when command is empty.
81 kes Fix Win32 build to pull in new BACULA define.
83 kes Change IncludeDir to Exclude Dir Containing.
84 kes Implement code to prohibit ExcludeDirContaining in an
85 Exclude section (same for Plugin and Options). A bit
86 of a kludge with RES_ITEM2 ...
87 ebl Add field to command list to restrict Runscript console
89 ebl Use a separate JCR when running Console command with Runscript.
90 ebl Permit to mark version as Beta in some ouputs
92 kes Add plugin types in jcr.h to reduce need to cast.
93 kes Do better checking of plugin return values.
94 kes Free plugin context after calling pluginFree() as
96 kes Allow plugin to call JobMessage with NULL context.
97 kes Do not add plugin to global list if loadPlugin returns error.
98 kes Rework plugin.h a bit to reduce dependence on Bacula.
100 kes Move generation of bsr file for Virtual Backup to run section
101 so that it is generated just before actually running.
102 Suggested by Graham Keeling.
104 kes Add malloc and free Bacula entry points for plugins. Increment
105 FD plugin interface version. Create a bacula plugin context
106 structure to keep track of whether or not the plugin is disabled.
107 kes Apply FileIndex fix for plugin name stream suggested by James.
108 kes List plugins in FD status report when debug > 0.
110 ebl Add a new VerId variable that is printed in version command.
111 kes Fix migration SQL not to migrate a job that has not terminated.
112 This is a partial fix to bug #1164.
113 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
114 backup start time bug reported by Graham Keeling.
116 ebl Fix possible bug in cancel_job() with job that are not
119 kes Fix bat build for Win32.
121 kes Copy plugin link field into ffpkt.
123 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
124 It provides FileRegex in bsr files and code to collect regex
125 from the user during restore, an Allow Mixed Priorities feature,
126 and documentation for the above.
127 ebl Remove db berkeley from configure process
128 kes Do dirty check on hostname (Linux only) and if not resolvable
129 use localhost as default.
130 kes Increase vtape max block to 20GB.
132 kes Refactor restore code to create a close_previous_stream(). This
133 This may destabilize the source.
134 kes Implement planned startRestoreFile() plugin call.
135 ebl Remove missing Loaded information from status slots storage command.
136 ebl Fix Console command problem that cancels the job
137 kes Add more plugin restore debug code.
139 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
140 kes Rewrite plugin restore interface a bit to correspond to how Bacula
141 creates and writes to the restored file.
142 kes Add some DebugMessage() calls to the bpipe-fd.c program.
144 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
145 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
146 Bat; allow add and delete in place of mark and unmark.
147 kes Another attempt to fix the endRestoreFile plugin bug noted below.
149 kes Apply dbi driver patch from Joao.
150 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
151 Bastien Friedrich reported the bug.
152 kes Create plugin instance only when FD job starts.
153 kes Add new FD plugin event: bEventCancelCommand when
154 a cancel command is issued to the FD.
156 kes Add cmd_plugin flag to jcr so we can globally know if a
157 command plugin is running.
158 kes If command plugin running, do not attempt (for the moment)
159 to get Win32 extended attributes.
160 kes Ensure that proper Win32 flags are set in bfile packet
161 if plugin_bopen() works on Win32.
162 kes Remove generated src/plugins/fd/Makefile
164 kes Implement build and install of bpipe-fd.so plugin.
165 kes Rework the interface that passes packets to the plugin
166 so that the packet is started and ended by the packet size.
167 This allows the driver to do a sanity check.
169 kes Rework the pluginIO Bacula internal code to enable
170 proper handling of Win32 error codes from GetLastError.
171 kes Apply Joao's patch to regress startover_libdbi.
173 ebl Add -B option to dbcheck to get catalog information
174 kes Fix Win32 build to include new library function.
175 kes Remove some old reader/writer code.
176 kes Implement ./configure --with-plugindir=xxx
177 ebl Fix the mysql bug in the new accurate code
178 kes Improve plugin debug. Create plugin test.
179 kes Set main thread specific data to INVALID because it
180 has no jcr. This allows debug output to work correctly.
181 kes Add src/plugins/fd/Makefile to ./configure process.
182 kes Make first cut attempt to correct SQL that computes the current
183 Pool usage. This is to fix bug #1159.
184 kes Do a bunch of plugin cleanups for Win32 and more careful checking
185 of PluginDirectory and whether or not a plugin was found.
187 kes This code should fix the race condition that leads to a Director
188 crash at job end time when the job list is updated. This was reported
190 kes Add more plugin documentation and fix include of config.h for
191 Win32 build (I hope).
193 ebl Revert to htable instead of rblist
194 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
195 tree instead of htable.
196 ebl Use a dedicate DB link to compute and send the accurate list
199 kes Fix compile errors in filed/fd_plugin.c.
201 kes Remove all double quotes from SQLite creating script and
202 replace by single quotes as suggested by John Huttley.
204 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
205 It significantly improves the performance of dbcheck for
207 kes Fix bad debug code call in src/filed/accurate.c
209 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
210 output. Perhaps we really need to implement M_SAVED.
212 kes Fix bug #1156 FD crash during processing of Accurate data.
213 kes Tweaks to htable code to improved debugging and make names
214 a bit more meaningful.
216 ebl Remove time_t from update_stats()
218 kes Modify the license of the example plugin program to allow
219 it to be used by anyone for making a Bacula plugin.
220 kes Make apply_rp_codes() in bpipe-fd.c be static.
222 kes Remove Encryption and Accurate lines in vbackup output -- not used.
223 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
224 kes Add host name to items printed during dump.
225 kes Make Check File Changes default on.
227 kes Set the default FD timeout to 3 minutes (previously 30).
228 kes Apply Bastian Friedrich's weird spelling correction patch.
230 kes Always print Verify hash differences. Rename variable to make the
231 code slightly more readable.
233 kes Correct tests for MaxFullInterval as reported by
234 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
235 kes Fix MaxDiffInterval code as well.
236 kes Enable Win32 plugin load code in lib.
237 kes Make Verify code that computes disk checksums use the same
238 algorithm as backup when dealing with sparse files.
239 kes Attempt to run VSS on any systems newer than Vista -- should
240 make it work on Windows Server 2008.
241 ebl Change the new statistic implementation. Remove the UseStatistic
242 directive and add a 'update stats [days=...]' command. You can
243 now decide when copy job records from Job table to JobStat.
244 Statistics are much more accurate with this.
246 kes Fix SQL case problem that may cause the failure of DiskToCatalog
248 kes First cut adding SD plugins.
250 kes Add Slot if it is non-zero to writing bsr file after a
252 kes Change a number of bnet_fsend() into class method calls.
253 kes Begin audit of diff of 2.4 branch to trunk code.
255 ebl Fix the mysql creation script that double-created an
256 index of the same field on the Media table.
257 Add an index to on VolumeName to the Media table for mysql.
259 kes Another try at fixing Vbackup. It looks much better this time.
260 Disable file index sanity check in FD with value stored in
261 attributes record because with Vbackup the File Index gets
262 changed, but not the attributes record.
263 Enhance some debug code.
264 Fix handling of re-indexing records that are copied in Vbackup.
266 kes Made level_to_str() know about Virtual backup.
267 kes Set correct Virtual backup write pool.
268 kes Fix compile warning in new dbcheck port code.
269 kes Fix migration code broken by previous virtual backup fix.
271 kes Fix problem of Virtual backup not writing a sequential FileIndex.
272 kes Reset Virtual backup time/date to the value from the last backup.
273 kes Ensure that storage name is passed to SD on read.
274 kes Correct a problem with Level and Virtual backup, rework how
275 bsrs are printed in debug to use standard routine.
276 kes Apply patch from Chris in bug #1133 that provides alternate db port
278 ebl Remove catalog dependency from bcopy tool.
279 ebl Modify catalog scripts to have an easier packaging integration,
280 using default variables.
281 Make difference between SQLite3 and SQLite in db_get_type()
283 kes Apply most of changes in a patch from:
284 Michael Stapelberg <michael+bacula@stapelberg.de>
285 that allow the Bacula FD to compile on IRIX 6.5.
287 kes Apply patch from Bastian Friedrich that accepts a yes on a
288 delete volume command line.
289 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
290 job when reading from one autochanger and writing to another.
291 kes Minor tweaks (copyright dates convert to use method instead of bnet).
293 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
294 drives when no tape is mounted.
296 kes Add additional info to some SD messages.
297 kes Add fix supplied by Martin Simmons for turning off EOL character
298 in new console multi-command code.
300 kes Fix a Verify InitCatalog problem where in certain cases
301 a garbage filename may be entered in the verification database. This
304 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
305 sent in by Riyas Yoosuf.
307 kes Fix seg fault in Dir during estimate command with no level value
308 given. This fixes bug #1140.
310 kes Add message to migration job when the target job is already migrated.
311 This closes bug #1129.
314 kes Raise some restore debug levels.
315 kes Replace off_t by boffset_t where ever I found it.
317 kes Define a machine dependent ioctl request type for use with
320 kes When a migration job actually runs, re-check the Job record
321 and skip if the job is already migrated. This should
322 significantly reduce the problems with bug #1129.
324 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
325 turn off glibc checks that prevent getting good dumps.
326 kes Implement console 'wait mount' command. Doesn't yet work.
327 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
328 kes Break the do_swapping into do_unload, do_swapping, and
329 do_load. It is much more logical that way.
330 kes Implement a set_dcr_from_vol subroutine in acquire.c for
331 reading volumes. This allows the dcr to be refreshed after being
332 zapped when the wrong volume is mounted.
333 This should fix bug #1126 -- During multiple tape restore, bacula
334 does not ask for physical tape change, but rereads same tape
336 kes Apply patch submitted for bug #1107 with a small modification.
337 This fixes a bug where bcopy copied too many records.
338 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
339 This fixes bug #1124.
340 kes Make the default bat restore Pool be Any. This fixes bug #1118.
342 kes Remove debug statement that crashes the SD at the end of
343 a tape during restore. Fixes bug #1125.
345 kes Implement Win32 bat changes made to Branch-2.4
347 kes Tweak separator command in console to start disabled and
348 allow defining no separator character. Also make code a
349 bit more fault tolerant.
350 kes Make btraceback write the traceback to the working directory
351 before attempting to mail it.
352 kes Add a RFC to Projects.
354 kes Attempt to implement a kludge to make Qt work with bat
356 kes Setup rstorage correctly. Virtual backups are working.
358 kes Move setting JobLevel and JobType into a method, which should
359 allow completing Virtual Backups.
360 kes Fix verify jobs to work again.
362 kes Virtual Backup tweaks -- it is close to working.
364 kes Ensure that SD tried to mount a volume not in an autochanger
365 at least once before asking for operator intervention.
366 kes Make SD aware of Virtual Backup jobs.
367 kes Add VirtualFull for bat.
368 kes Changes to get read storage correct for Virtual Backup.
370 kes Remove old code from label.c
371 kes Split display_display_info() out of write_bsr_file()
372 kes do_vbackup_init() working -- i.e. bootstrap file built.
373 kes Change Bacula trademark owner from John Walker to Kern Sibbald
374 kes First non-working cut of vbackup
375 kes Correct FD heartbeat code to use volatile variable accessed by
377 kes Zero thread id with memset if on Win32 in case it is a struct.
378 kes If cannot create JobMedia record, continue to try to write eof
379 and clean up in block.c
381 kes Add code to interface OpenSSL to new Win32 pthreads code which
382 used a structure for thread_t.
384 ebl tweak bat for win32 compilation
386 ebl Remove tokyo cabinet from the source
387 ebl Update configure/autoconf to support berkeley DB
388 ebl Add a sort to db_get_file_list() to improve bsr construction time.
390 kes Add a mtx-changer.conf file that is not overwritten during
391 an upgrade. It fully configures the mtx-changer script.
392 kes Clear in-use bit on vol when unused while swapping.
394 kes Remove sleep at end of ./bacula
395 kes Clear hash packet for hardlinked files correctly. This corrects
396 a long standing bug where hardlinked files selected individually
397 would occasionally not be restored.
399 kes Apply Eric's patch to ensure that autoprune does not return
400 a Volume not in the autochanger unless requested to do so.
401 kes Correct bat restore display of multiple drives. This fixes
403 kes Do find_a_volume() each time an unload is done. This
404 fixes the failure of maxvol2-test.
406 kes Add some SD debug code.
407 kes Do find_a_volume() each time an unload is done.
408 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
409 and adds --with-db-port to ./configure.
410 kes Use Qmsg() in job.c watchdog callback.
412 kes Release main control rwlock if ABORTing.
413 kes Make watchdog connect timeout queue messages rather than sending
414 directly to avoid lock conflicts with the real thread.
415 kes Add const char in dbd.c to avoid compiler warnings.
416 kes Fix python compiler string warning. Note, IMO the GNU C++
417 compiler guys have made a *very* bad change to their compiler.
418 They now force all strings to be 'const' unless you explicitly
419 cast them, which is extremely ugly and ruins nice code as well
420 as creates a lot of useless work.
422 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
423 mt. This fixes bug #1116.
424 kes Add const in python files to reduce compiler warnings.
425 This may have to be backed out because of later compiler
427 kes Fix failure of 2drive-concurrent-test. Always read label;
428 clear_unload() only after drive is defined in acquire_for_read().
430 kes Generally clean up the manual tape loading code. The main
431 conceptual change is that when a volume is marked to be unloaded,
432 its volume name is retained, and it is only marked as unloaded
433 when either the autoloader says it is unloaded or another tape
434 is read on that drive.
436 kes Add debug code and refactor subroutine in stored/mount.c
437 kes Fix format problem in bscan output reported in bug #1105.
438 ebl Fix get_next_volume_for_append logic with autochanger
439 - use pruned volumes if found
440 - don't reset the inchanger flag after getting a recycled volume
442 Fix recycle_oldest_purged_volume to take InChanger flag in account
444 ebl Add mmap/unmmap implementation for tokyodbm under win32
446 kes Make first step toward eliminating globals from config
447 scanning. Also should be a workaround for FORTIFY_SOURCE
448 GNU C bug -- fixes bug #1042.
450 kes Apply duplicate job tests to restarted jobs.
451 kes Copy more data when restarting a job so that run
452 overrides are kept. This should fix bug #1094.
454 kes More word alignment cleanup.
455 kes Fix bug where SD did not ask operator if the device could not
456 be opened. Reported by Eric.
458 kes Add dbuser to DIR conf file (replaces user).
459 kes Add --with-db-password to ./configure
460 kes Fix regress to handle db_password.
461 ebl Add new 'status storage slots' that list autochanger
463 ebl Update vtape driver to compile only under Linux.
464 ebl Fix a bug when restoring with a wrong mediatype.
466 kes Eliminate ints from conf files and structures to avoid
467 word alignment problems
469 kes Fix bug reported by Scott Barninger where the bacula script
470 refers to scripts in the wrong directory. Needed to meet the
471 requirements of recent FHS location changes.
472 ebl Disable vtape for FreeBSD.
474 ebl Modify disk-changer to check if slot contains something before
477 ebl Fix vtape on win32 and debian.
478 ebl Fix autoselect patch (cause segfault).
480 ebl Fix autoselect option broken for a while. Fix #1089. Need some
481 work with StorageId to be able to use a particular drive in a
484 ebl Rename vtape to vtape.
485 ebl Update vtape driver.
487 ebl Modify vtape driver to avoid sparse file.
488 kes Add make clean of qt-source directory during ./configure
489 kes Store last block number written to tape in DEVICE and
490 use it for testing for correct last block on EOT.
492 Release Version 2.4.0:
496 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
497 This fixes bug #1095.
499 kes Add create_postgresql_database.sql to Win32 installer. Should
500 fix problem reported by Juilio Monteiro.
501 kes Get correct slot when auto unloading a device. This fixes bug
504 kes Fix multiple media restore.
505 kes Make DEVICE Slot private and access it via a method.
506 Allows better control over when it is set and cleared.
507 kes Fix possible seg fault if SQL error.
509 kes Add Martin's fixes to argument scanning for the estimate
510 command. This fixes bug #1093.
511 kes Add debug code to SD.
512 kes Fix renaming a Volume, which used the wrong Volume name.
514 kes If operator has rewind tape, print warning, release tape and
515 try once more. If tape is positioned somewhere, something went
516 wrong, so mark the tape in error and try once more. Previously
517 this error was fatal, now it produces an error message.
518 kes Ensure correct volume name displayed during restore
519 kes Ensure that Volume is mounted for restore.
521 kes Fix a few more Coverity reported problems.
523 kes Apply Allan Black's status dir job count patch.
524 ebl Add information about IMPORT/EXPORT slots in mtx-script.
525 kes Enhance a couple of SD debug messages.
526 kes Tweak unload flag setting and ensure it is set during swap.
528 ebl Fix #1091 about bad output in estimate command.
530 kes Modify autochanger locking to attempt to avoid race
532 kes Make sure device not busy before doing label command.
533 kes Display open() errors except when polling. Previously too
534 many were suppressed. This should fix bug #1070.
535 kes Fix Win32 reparse points. Bacula will not recurse into any
536 reparse point directory, including mount points, unless the
537 directory is explicitly mentioned at the top level (same as
538 with Unix). A file that is linked to another file will be
539 backed up -- much as Unix does for hardlinked files.
540 This fixes bug #1041.
542 kes Remove double quotes from ChangeLog and ReleaseNotes
543 kes Remove StorageId test when pruning and recycling (Eric's changes).
544 kes Remove old form of locking when getting volumes -- causes deadlock.
545 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
546 the name unique and to eliminate compile time error.
547 kes Add accurate.o to Win32 FD Makefile
549 kes Fix cats dll build on Win32 after db_update_job_end_record
550 calling sequence change.
551 ebl Switch to tokyo dbm instead of htable in accurate code
552 ebl Include tokyo dbm to bacula source tree
554 kes Fix buffer overruns detected by Coverity.
556 kes Tweak joblog display.
558 kes Implement --without-qwt
559 kes Fix layout of restore tree dialog
560 kes Add configure bat QWT libraries, so that bat can be built
561 with or without the QWT libaries.
563 ebl Add dummy tape driver for regression tests.
564 kes Make sure we unload the right slot when swapping.
566 kes Add debug times, reduce size of two-pool-changer test
568 ebl Tweak autoconf scripts for vtape
570 kes Improve SD reserve debug code.
571 kes Testing an improvement to free up volumes no longer in use.
573 kes Rework SD acquire for read to handle autochanger Volume
575 kes Implement regression that explicitly tests swapping a Volume
576 from one drive to another.
577 kes Enhance disk-changer to detect most error conditions.
578 kes Fix SD code so that it properly swaps a Volume between drives.
579 This fixes bug #1083.
581 kes Apply libdbi patch from Joao Freitas for regress and for
582 Bacula trunk. Regress now works with libdbi. Nice.
583 kes Apply .nobackup patch from bug #1077 submitted by
585 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
586 name into jobs cloned via the run directive.
588 kes Prevent a Volume that is being swapped from being freed from
589 the volume list. This will most likely fix, at least partially,
591 kes Fix strippath so that it does not get a buffer overrun and crash FD.
592 This fixes bug #1078.
593 kes Remove 50 millisec wait in SD that broke debugger.
594 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
595 that a job may run, counted from when the job was scheduled.
596 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
597 a job may block waiting for a resource, counted from when the job starts
598 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
599 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
600 that implements multiple commands per line in the console when using
601 readline. Modify the default to use a semicolon as the command separator.
603 ebl Fix SQL query in migration code.
604 ebl Make accurate mode with hash disk pass regression tests
606 ebl Implement first cut of accurate backup with hash disk.
608 kes Force unload of volume when wrong volume mounted in SD.
610 kes Fix bat seg fault at termination.
611 kes Add Bacula generated version to bat about box.
614 kes Experiment with allowing multiple read jobs.
615 kes Move final volume swapping code to DCR method and
616 call it from acquire_for_read().
617 kes When wrong volume is mounted during read, unload_autochanger.
619 kes Integrate the libdbi changes from Joao Henrique Freitas
621 kes Stop searching for Volumes in SD askdir if DIR returns the
622 same volume name twice in a row.
623 kes Close bat console windows first to eliminate error message
626 kes Tweak the swap Volume from one drive to another code so that
627 it now seems to work.
628 kes Resolve several problems with recycling that broke the new
629 code (these problems are in 2.2.9 as well).
630 kes Remove the volume lock when calling the sysop code.
631 kes Don't mark a reserved volume with no writers as unused otherwise
634 kes Rework class structures for VOLRES, DCR, and DEVICE to make
635 the method names a bit more logical, and for more logically
636 handling the responsibilities.
638 kes Remove redundant code in terminating the scheduler that just
639 causes a seg fault in many cases.
640 kes Cleanup releasing a volume and make it a DCR method.
641 kes Improve algorithm for detecting pre-reserved volume and
644 kes Tweak volume swapping code so it works.
645 kes Correct name overloading in mount.c
646 kes Replace released flag in VOLRES with reserved and add access
647 methods for the VOLRES class.
648 kes Prevent volume from being released while being swapped.
649 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
650 plugin that add %w (where) and %r (replace flag) editing to
652 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
654 kes Refactor parts of stored/mount.c
656 ebl Add sanity checks for VolWriteTime and VolReadTime
657 ebl Take care of bad clock changes while computing VolWriteTime
658 and VolReadTime. This should fix or limit #1066
659 kes Correct error string numbers in dird/catreq.c
660 kes Restructure reserving, acquiring, and mounting volumes. Calls to
661 autochanger are deferred for mount.c -- simplifes the code.
663 kes Do not prune any running job. It just fails the job.
664 kes Lock the volumes when changing dev->reserved_device and marking
665 the volume unused otherwise the device can get reserved by
666 another job before the volume is released, thus blocking it.
668 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
669 kes Fix bug #1063, reuse of freed ptr in list nextvol.
670 kes Release regex compile buffer in filed/job.c
671 kes Add proper type of const char in sql_create.c
672 kes Turn off debug in daemon termination routines
673 kes Move free_volume_list() before devices are freed in stored.c
674 kes Fix reference to uninitalized stack variables in bregex.c.
675 This should correct bug #1067.
677 kes Fix possible seg fault in SD when freeing a volume entry.
679 kes Implement unload_dev() before swap device.
680 ebl Add statistics prunning with option and menu
681 kes Separate unload_dev() from unload_other_device() in autochanger.c
683 kes Apply patch from bug #1069 that corrects spurious error messages
684 when ACLs enabled on SGI but no ACL exists.
685 ebl Fix small segfault in bacula-sd when debug level is 500
686 kes Modify run_program() and run_program_full_output() to use
687 call by reference for the results string. This corrects a long
688 standing problem where the address of the string may be changed
689 in the subroutine but not in the calling program.
691 kes Re-enable code to remember last volume mounted on a non-tape
693 kes Add patch supplied in bug #1068 that fixes a SD crash when using
694 a Virtual autochanger.
695 kes Generate correct JobMedia records during spooling/despooling when
696 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
697 <tih@hamartun.priv.no> for excellent analysis and testing.
699 kes Tweak hash algorithm for htable using Martin Simmons idea
700 for doing a circular shift.
701 kes Remember what volume is in VTLs (previously turned off for
703 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
704 pointed out some problems in creating JobMedia records during
705 spooling with concurrent jobs. Fix the problem by updating the
706 start file position before despooling and generate a jobmedia
707 record at the end of despooling.
709 kes Fix handling of JobMedia records during spooling and when a
710 Volume is changed without actually writing data to the Volume.
712 kes Rework certain SD locking based on gdb tracebacks of deadlocks
713 sent by Eric. This code now uses only the volume_lock() rather
714 than the reservations lock when at EOM and acquiring a new
716 kes Ensure only one exit point in several subroutines.
718 kes Implement bsock code to permit locking. Use the new code in Verify
719 in the FD to prevent the heartbeat thread from disrupting the Verify
720 data sent to the Dir.
721 kes Modify SD locking to eliminate locking the reservations system from
722 outside the system. Use the volume lock when getting media data
723 and reserving a new volume at end of media.
724 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
725 when SD starts are not locked into place.
727 kes Fix error compiling runscript code on 64 bit machines.
728 kes Tweak Win32 mount point code.
729 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
730 cleared giving bad file estimate).
731 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
734 kes Keep Schedule run lists in order as suggested by
737 kes Implement autostart scripts for Debian.
738 ebl Implement upgrade catalog scripts.
740 ebl Apply jobstat patch for long term statistics. Have to implement
741 purge stats command and upgrade scripts.
742 kes Fix mtx-changer.in for broken Debian mt program.
744 kes Fix large number of JobMedia records reported by Eric Bollengier.
746 kes Apply doc fix from bug #1062.
747 kes Resolve crash and improper restore wx-console Win32 restore
748 GUI. Fixes bug #1065.
749 kes Update Win32 wxWidgets to latest version.
750 kes Attempt to do correct handling of Win32 mount points. Should
752 kes Fix Win32 FD backup/restore memory leak due to improper termination
753 of BackupRead/Write. This fixes bug# 1038.
755 ebl Reduce memory usage for accurate backup, working only with ctime
756 and mtime. (not all Lstat field)
757 About 40MB for my Linux system (400.000 files)
759 kes Add dcr->reserved_volume flag that allows us to release a volume
760 even if it is not vol->released. This allows maxvol2 to work when
761 Volumes expire and we are already writing to the device (i.e. a
762 volume is pulled out from under us by another job terminating after
763 we reserve the drive).
765 ebl Permit multiple command/console per runscript definition.
766 RunScript { command = /bin/true ; command = /bin/false ... }
767 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
768 (restart an application) just after the VSS snapshot on windows.
769 kes Don't zap dcr values during release_volume() as they might
770 have the next Volume to be mounted.
771 kes Fix AIX prototype.
773 kes Second cut of drive switching during backup.
776 kes Update Win32 version of wxWidgets to most recent version.
777 kes Tweak Copy job details.
778 kes Rework dir_find_next_appendable_volume to make a bit more effort
779 to find a suitable volume before giving up.
781 kes Make ask_sysop_to_create... to return if waken from wait.
782 This helps get out of blocked conditions.
783 kes Experimental implementation of switch_device in reservations.
784 kes Implement FD version to allow easier protocol changes.
785 kes Add Plugin Options string -- not yet passed to FD.
786 kes Implement PluginOptions ACL.
788 kes Attempt to correct problems with restores with autochangers and
789 use counts going negative
790 kes Rework SD status command and implement API for bat. Implements
791 header, runing waitreservation, devices, volumes, spooling,
792 and terminated status keywords.
793 .status storage=xxx <keyword>
794 kes Clarify TLS error message by adding double quotes around name.
795 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
796 kes Pass jcr to tls routines so debug messages can be handled better.
797 kes Rework jobq resource allocation code, and possibly fix a bug
798 that caused reference counts to get out of sync.
800 kes Rename fd/dir plugin to use Bacula standard underscore.
801 kes Plugin work -- bring dir up to fd level.
802 kes Start implementation of VTL code
803 kes Fix Win32 build after adding new cats subroutine.
805 kes First cut at Duplicate Job implementation.
807 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
808 kes Start PluginOptions string, and refactor a bit of ua_run.c
809 ebl Apply Allan patch that permit to reset recyclepool.
811 kes Test patch -- possible fix or improvement for bug #1053
812 kes Refactor FD and SD status commands to permit new API code in
813 SD, and to fix Win32 build.
814 kes Win32 build is now working.
816 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
817 some ideas in patch from Scott Bailey.
818 kes Begin implementation of duplicate Job control.
819 kes Fix some of Win32 build after recent additions.
820 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
821 which causes the FD to detect whether or not the OS has the
822 honor no dump bit (*BSD systems), and if so, to skip backing up
823 any file with this bit set. The feature is enabled by setting
824 'honor no dump flag = yes' in the Options section of a FileSet.
826 kes Correct po warning message with datarootdir
827 kes Implement more code in dird.c to put configuration parsing in
828 a class rather than use globals.
829 kes Restructure SD status command for implementation of bat API
832 kes Suppress incorrect 'Will not descend from x into y' messages.
833 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
834 daemon globals used by parser.
835 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
837 kes Fix free of plugin_list when none exists.
839 ebl Apply accurate project patch.
841 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
842 on non-mempool object)
843 kes First cut of converting FD .status to work with bat API.
845 .status client=XXX header
846 .status client=XXX running
847 .status client=XXX terminated
848 kes Implement first cut of Copy Job.
849 kes Implement Catalog in Pool resource. It overrides catalog specified
850 in the Client resource.
852 kes Apply patch (with some difficulties) from Joao Henrique Freitas
853 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
855 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
856 ftruncate() actually works. In the case of some (cheap) NAS devices,
857 it does not, and so recycling NAS Volumes does not work. The code
858 simply unlink()s the file, then recreates it. This fixes bug #1011.
860 kes First incomplete cut of big malloc blocks for htable.
861 kes Tweak plugin code.
863 kes Plugin debug code + tweak a couple bat dialog layouts
865 kes Fix creating first JobMedia record during Migration to include
866 proper index. This caused slow restores of migrated jobs.
867 kes Temp fix to plugin name file_index.
868 kes Bacula backed up and restored a MySQL database.
870 kes Implement plugin restore.
871 kes Implement parsing of db_driver to give db_type index.
873 kes First cut of plugin restore code.
874 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
875 and do not strip paths on symbolic links.
876 kes Set catalog backup database and user name from values specified on
877 the ./configure line.
878 ebl Fix #1031 about wrong pool source information in job report.
881 kes Remove a redundant jcr argument to find_files, match_files, and
883 kes Implement '.status dir header|scheduled|running|terminated' that
884 prints the requested status section. With the exception of the
885 header, the other reports have fields separated by tabs (\t).
887 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
888 a resource embedded run command to find a since time if no explicit
889 since time was supplied on the command line.
890 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
891 that updates the state file at job termination time in addition to
892 when the daemon terminates.
894 kes First version where a plugin did a backup.
895 bpipe-fd.so created a backup file, wrote a test
896 string to it, and Bacua could restore this fabricated file.
898 kes Implement DB Driver = string for the DBI driver.
899 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
900 kes First cut of code for loading Win32 plugin dlls. Implement
901 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
902 and implement a dlfcn.h file based on opengroup's definitions of
905 kes First cut plugin directives.
907 kes Apply patch from bug #1049 to prevent stripping the path on a
909 kes Attempt to fix bug #1047 where stripping a path corrupts the
910 heap. Waiting for feedback.
911 kes Correct the Mount message not to suggest labeling a new tape
912 when doing a restore. Submitted by email by John Stoffel.
913 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
914 FD by using casting. Reported in bug #1042.
916 kes A bit of crypto cleanup. More later.
918 Release Version 2.2.8
920 kes Apply patch from Martin to correct bug #1040, bscan sets existing
922 kes Fixed important spelling error in doc -- bug #1045.
924 ebl Fix bextract to be able to extract non-portable Win32 data to
926 kes Move initialization of read/write res lock earlier in the code.
927 This fixes the crash with a null conf file. This fixes bug
929 kes Redefine CURES in lib/parse_conf to be URES and move it all
930 into lib/parse_conf.c -- this responds to bug #1042, but does
931 not fix it. The fix is not to compile with FORTIFY_SOURCE.
932 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
933 the trunk SVN. I don't think this was reported as a bug.
935 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
937 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
939 kes Add DataDespooling and DataCommitting status (committing is
940 the last despooling).
941 kes Finish implementation of new reservations code noted below.
943 kes Fix bsnprintf for float point numbers. I broke recently when
944 parameterizing some variables. This fixes bug #1036.
945 kes Undo recent reservations changes ... will apply them later
946 when they work better.
948 ebl Fixes #1034 which cause mysql to hang the connection after 8h
949 ebl Change default statistics target of filename.name and path.path
950 fields for PostgreSQL. This speeds lookup by indexes. Thanks
952 kes A few more tweaks to new reservation code. Make sure to clear
953 vol released flag when retaking volume. When reading label and
954 label is bad mark volume unused. When recycling, mark volume
955 unused so it can be renamed.
957 kes Fix reserve_volume() so it doesn't release a volume in use
958 (i.e. a volume entry not marked released). This should be
959 the last part needed to fix bug #1018.
961 kes Move Heartbeat documentation from Job to Director resource.
962 This fixes bug #1033.
964 kes Fix existing switch drive SD code to call autochanger to release
965 any old volume. This must be done to keep the autochanger from
966 releasing subsequently newly reserved volumes in doing a close().
967 This should fix bug #1018.
968 kes Fail if attempting to get console input in batch mode. This
969 should help fail RunScript console commands that are incomplete.
970 kes First cut implementing switch_drive() in SD (not actually called).
972 kes Implement first cut running console commands in a RunScript.
974 ebl Fixes bug #1028 where 'Selection Type' option was not usable
976 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
979 Release Version 2.2.7
981 kes Add new free_tls() entry point so that Win32 builds.
982 kes Fix compile warning in src/lib/util.c
983 kes Fix entry point for edit_job_codes() so that Win32 builds.
984 kes Fix seg fault Frank Sweetser reports in regression testing
985 on his systems. The problem was that the original author of
986 bsnprintf.c did not take into account the side effects of
987 using ++x in the argument to a #define.
988 kes Make SD protocol backward compatible with version 2.2.x.
990 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
991 because Bacula no longer restores sockets.
992 ebl Always use ignorecase fileset option on win32 FD.
994 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
995 that implements double quoting include names in conf files,
996 and also allows piping input by having the first character
997 be a vertical bar (|).
998 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
999 that implement %f in RunScripts to pass the FileSet name.
1000 kes Skip leading | when lex input comes from a pipe as suggested
1001 by Michael Stapelberg <michael@stapelberg.de>.
1003 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
1004 Nerijus Baliunas <nerijus@users.sourceforge.net>
1006 kes Implement Plugin Directory and plugin events.
1008 kes Implement a security enhancement: TLS authentication but no
1009 encryption. Enabled by setting 'TLS Authentication = yes'.
1010 Note when this is on, TLS encryption is turned OFF!
1012 kes This patch corrects a problem where the maximum concurrent storage
1013 jobs counter gets out of sync during restore jobs causing jobs to
1014 'wait on max Storage jobs'. This patch fixes bug #1009.
1016 kes This patch fixes bcopy so that it produces correct Volumes.
1018 kes This patch eliminates spurious output to the console during a VerifyVolume
1019 job that contains encrypted data. It fixes bug #1024.
1021 kes This patch prevents the 'status dir' command from trying to use a scratch
1022 volume and possibly moving it from one pool to another. This patch fixes
1025 kes Add new include to postgresql.c suggested by Marc Cousins so
1026 that it compiles correctly with pgre version 8.3.
1028 kes Fix --archivedir addition to configure. Replace it with
1029 --with-archivedir in configure.in This fixes the regression
1031 kes This patch fixes bug #1012 where the job is canceled because
1032 of Max Run Time exceeded when the job has not yet started.
1034 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
1035 one 'part' to write. Instead of each part being stored on disk,
1036 written to DVD, then deleted from disk, all parts are written to disk,
1037 and only the last is written and deleted from disk.
1038 kes This patch fixes the status command to include the formating string for
1039 JS_AttrInsterting. It fixes bug #1021.
1040 kes This patch should fix the Mac OS X build problem on the latest
1041 Darwin, where sys/types.h was not included correctly (apparently
1042 due to a change in the Mac headers). The solution was to explicitly
1043 ensure that it is defined for the ./configure.
1044 This patch also has a rebuild of configure that includes the Debian
1045 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
1046 kes This patch should ensure that queued messages to the console are
1047 displayed as soon as possible. It should fix bug 1007, but has been
1048 reported not to work.
1050 kes This patch fixes the infinite loop when trying to increase the
1051 maximum number of volumes in a Pool during the add command.
1052 This patch fixes bug #1008.
1054 Release Version 2.2.6
1056 db Remove extra data on estimate command in joblist for bat.
1058 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1059 really change anything, but is the beginning of doing it *right*.
1060 To do it completely right the LastWritten date must be passed to
1061 the SD, but it is not yet done.
1062 kes Minor tweaks to some bat restore SQL.
1063 kes This patch fixes bug #1003 where putting the message output from
1064 a Verify job into the catalog results in a recursive loop. The problem
1065 seems to show up only with postgresql (to be verified).
1066 kes Correct %x to %p in postgresql debug statement.
1068 kes Fix bug #942 where lots of emails where generated when the heartbeat
1069 interval was low and Bacula wanted a different tape from the one in
1072 ebl Add new SD despooling attributes and Dir inserting attributes
1073 job status codes in the catalog (Status table).
1075 ebl Use qmake-qt4 instead of qmake when available (debian system).
1077 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1078 that passing the password via the command line (arg 3) is insecure.
1079 This responds to bug #990 (it doesn't fix it).
1081 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1082 kes Fix a crash in bat when it cannot connect to the Director for example
1083 if the Director is not running.
1084 kes Remove redundant INDEX (JobId) from File table in the trunk.
1085 This fixes bug #992.
1086 kes Make explicit exception to GPL in LICENSE to permit linking
1087 the Win32 FD with Microsoft VSS code.
1088 kes Apply the Solaris package patch from
1089 Masopust, Christian <christian.masopust@siemens.com>
1090 kes Apply the patch to optionally add a timestamp in the debug output
1091 submitted by Mariusz Czulada <manieq@wp.eu>.
1093 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1094 backend (sql_strerror). Fixes bug #989
1096 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1097 It applied with no problems.
1098 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1099 awk are on the path.
1100 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1101 since the status is returned on stderr on Solaris.
1102 kes Activate Close button on tray-monitor window. This fixes
1104 kes Check for NULL item in parse_conf.c before calling it. In the
1105 case of Device, there is no item and this caused a seg fault when
1106 Device appears in the conf file.
1107 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1108 avoids pulling in config.h multiple times in some new code.
1110 kes Fix spurious warning message printed when creating a volume with
1111 a LabelFormat. This fixes bug #976.
1113 Release Version 2.2.5
1115 kes Add JobId in place of Job name in all the Jmsg() output.
1116 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1118 kes Make maxvol-test and new more strict maxvol2-test work.
1119 kes Print JobId in all Jmsg() job output.
1121 kes Add new SD despooling attributes and Dir inserting attributes
1122 job status codes. This fixes bug 961.
1123 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1125 kes Fix doc issue. This fixes bug #963.
1126 kes Fix listing performance problems in bat. Pointed out by
1128 kes Remove old debug code.
1129 kes Fix bat code that tests for Win32. This should fix bug #968
1130 kes Query 5 list wrong Vol after migration. This fixes bug #960
1132 ebl Fix #969 where user can't change Replace option in restore menu.
1134 kes Save jcr in thread specific data (tsd) for each thread.
1135 kes Make Dmsg() print JobId as -%u.
1136 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1137 for the thread if it exists.
1138 kes Remove old reservation debug jid code.
1139 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1140 ebl Add an option that permit to specify spool size in job
1141 definition. (Applying patches/testing/spoolsize_per_job.patch).
1142 You must upgrade SD and DIR at the same time.
1143 dvl Add new configuration item --archivedir
1144 dvl Adjust regression tests to use tmp not /tmp. This will allow
1145 multiple concurrent runs of the regression tests.
1147 kes Fix race condition that drops final block written to volume.
1148 This happens in rare cases with multiple simultaneous jobs
1149 when the Volume fills. This fixes bug #964. May be related
1150 to bug #935 and possibly #903.
1151 kes Eliminate more strerror() and replace with bstrerror().
1152 kes Remove BSD getopt and replace with unrestricted IBM version.
1153 kes Fix Win32 build for changed calling sequences.
1154 kes More tweaks to the mount volume routines to get everything
1155 right. Changed variable name from find to have_vol, which is
1156 much easier to understand.
1157 kes Enhance btimer debug code.
1159 kes Fix FD->SD authorization failure, which was due to spurious
1160 wakeups from a pthread_cond_timedwait(). Simply check the
1161 predicate before continuing. This fixes bug #953.
1162 kes Add const char where needed (more to do). Remove temp debug code.
1164 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1165 kes Don't overwrite error message in check_tables_version.
1167 kes Unlock batch insert tables with same calls used elsewhere.
1168 kes Allow starting 59 jobs a second.
1169 kes Make SD session key more random.
1170 kes Add retry for SQLite opening db if it fails. Probably helps
1172 kes Suppress extra error messages during batch insert failure.
1174 kes Add jcr to timer packets so if killed message can be sent to job.
1175 kes Add JobId to all Dmsg() output.
1176 kes Put some FD auth code on dbglvl rather than fixed.
1177 kes Return insert attributes error message in db msg buffer to avoid
1178 false error messages. Helps fix bug #966.
1179 kes Separate batch init error messages. Probably helps fix bug #966.
1180 kes Make SD code that contructs attribute insert check string lengths
1182 kes If Dir gets an error during inserting attributes, cancel SD.
1183 This reduces unnecessary error messages.
1185 kes Correct search boolean for getting Volume info
1186 ebl Cleanup batch insert code. Probably fixes bug #965.
1187 kes Back out one small change to the reservation system (reserving a volume).
1188 kes Rework how a Volume is mounted. It is now much more intelligent and
1189 will always attempt to use any mounted volume if possible and reduces
1190 calls to the Director asking about volumes.
1192 kes Turn off some code when batch insert not enabled.
1193 kes Edit FD name in connect error messages.
1194 kes Rework the reservation system to take into account that the Director
1195 might give us a Volume that is different from the current one being
1196 used, and to ensure that we don't exceed Maximum Volume Jobs.
1197 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1198 fatal error with multiple jobs running'
1199 kes Add more debug code in reservation system.
1200 kes Implement maxvol-test to check bug #947.
1202 kes Add code to handle tray monitor separated from Win32 FD.
1203 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1205 kes Add missed return in fixing verify bug -- trunk only.
1206 ebl Fix a command parser issue causing a director segfault.
1207 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1208 This fixes bug #954.
1209 kes Increase the max block size to 4MB fixes bug #957.
1210 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1211 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1212 is not properly mounted (recognized) during a poll.
1213 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1214 Job that has differences reports Verify OK.
1215 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1217 ebl Add an option to operate on all pools with update vol parameters.
1218 This complete the project 20. Patch from Nigel Stepp.
1219 ebl Add history support to bconsole when using readline.
1220 Using Ctrl-D to exit doesn't update .bconsole_history
1221 kes Modify new volume algorithm to use max MediaId for generating next
1222 volume number rather than the count of Volumes. This should essentially
1223 eliminate the failure rate if some volumes were deleted. Bug #921.
1224 kes Begin implemention of Optimize Job Scheduling.
1225 kes Implement restore callback that Dirk and I agreed on for bat
1226 restore. This fixes bug #928. Restore of backup of zero files fails.
1227 kes Fix SQL Catalog logging which broke with new db_escape_string
1230 Release Version 2.2.4
1232 kes Fix bacula_cats.def for new db_escape_string().
1233 kes Increase size of name string when FD making connection to SD.
1234 May fix bug #953. FD->SD connection failure.
1236 kes Add code to help Dan debug 2drive-incremental-2disk test.
1237 kes Add code to try to fix bug #908.
1238 kes Add waits to multiple exit detection code to try to force pid
1239 file to always be deleted.
1240 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1241 This fixes bug #950.
1242 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1243 trying to switch drives by checking for blocking before unblocking.
1245 kes Cancel storage daemon in all cases where FD reports error. This
1246 should fix virtually all cases of bug #920.
1247 kes Fix db_escape_string() for MySQL which did not compile.
1249 kes Fix error message that was clobbered when Dir tells SD it does not
1250 have write permission on Volume. This should fix a minor point
1251 in bug #942, but not the main problem.
1252 kes Add code to cancel job in SD if FD connection fails. This should
1254 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1255 dvl Pass jcr and db into db_escape_string() to enable better escaping
1257 kes Fix migration code to get correct Volume name with multiple volumes
1258 by skipping |. Fixes bug #936.
1259 kes Implement patch supplied by Landon to fix bug #944 where using
1260 TLS with bconsole uses 99+% of the CPU.
1261 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1263 kes Move patches into patches directory.
1265 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1268 ebl Using 'm' in bconsole will show messages like before,
1269 and not memory usage.
1270 kes Fix bug #935, and probably also bug #903 where files were not
1271 restored. MediaId was not properly set in JobMedia record after
1274 kes Suppress chown and chmod error messages if the FD is not running
1277 kes Apply Martin Simmons' patch that should turn off the new API usage
1278 when batch insert is turned off allowing building on older
1280 kes Add ./configure search in qwt-qt4 for qwt package
1282 kes Bacula is now free of 3rd party GPL copyrighted code!
1283 kes Remove idcache.c
1284 kes Add guid_to_name.c/h which replace idcache.
1285 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1287 ebl Detect if new PosgreSQL batch insert API is present.
1288 kes Correct incorrect mempool call causing Director crash. Occurs on
1289 systems without va_copy().
1290 sb Update spec files for 2.2.1 release
1292 kes Fix memory pool call in ua_output.c. bug #934.
1293 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1294 Add test program to fnmatch.c
1296 kes Integrate patch to README.vc8 from
1297 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1298 edit it to get it into Unix patch format.
1299 kes Implement mkpath.c to replace old FSF makepath.c
1301 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1303 Release Version 2.2.1
1305 kes Update POTFILES.in
1306 kes Cleanup a few underquoted AC_DEFUNs in configure
1307 kes Apply patch from Martin Simmons that adds a test for va_copy to
1310 kes Fix bug #921 by increasing the number of tries to create a new volume
1312 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1313 can be called multiple times. Implement a version for machines
1314 without va_copy() that gets a big buffer.
1316 kes Integrate more portable zone offset code into bsmtp.c
1317 Submitted by Attila Fülöp.
1319 kes Fix bad SD->FD return status reported by
1320 (James Harper) <james.harper@bendigoit.com.au>
1321 ebl Fix a bug in read_close_session which return random status
1322 thanks to James Harper
1324 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1325 and directory names during restore of single file/directories.
1326 kes Add sanity checks to .sql command when string is empty. Hopefully
1327 that will resolve Dirks Director crash.
1329 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1330 in the bsmtp chat subroutine when debug is >= 10.
1332 kes Fix Director crash when running bat SQL queries.
1333 kes Add David's notes on Item 8: Copy pools.
1335 kes Rework projects file to be current and ready for a vote.
1336 kes Enhance lex scanner error message.
1338 kes Tweak LICENSE file to mention BSD code.
1339 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1340 if specified on the ./configure.
1341 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1342 This class is intended to allow us to open a second bsock to the
1343 Director while in the restore subdialog.
1345 kes Fix configure to create bat Makefile before creating dependencies.
1346 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1347 kes Add a tooltip to the tray monitor.
1348 dvl Set the Director's PID file before dropping privs. This fixes
1351 kes Update AUTHORs file
1352 kes Increase the default max concurrent jobs to 20 in FD and SD to
1353 correspond with the default .conf files.
1354 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1355 some different, of the same file created by RN when porting the
1357 kes Rearrange some of the Win32 directories and the placement of the files
1359 kes Set DEVELOPER flag in version.h
1361 ========================================================================
1362 Release Version 2.2.0
1364 kes Apply a second doc patch from Marc.
1365 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1366 improves the tips section that discusses how to setup multiple
1369 kes Update bat README file.
1370 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1371 corrects a typo in the Recycle status check in db_find_next_volume().
1372 This will probably fix a number of annoying problems with multiple
1374 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1375 bnet calls -- no functionality change.
1377 kes Modify the Verify output to specify if files are missing on
1378 the Volume(s) or disk. Fixes confusion in bug #916.
1379 kes When more than one Volume is read in a migration job, the last
1380 Volume bytes reported are from the last read volume rather than
1381 the last written volume. Fixed. This fixes bug #910.
1382 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1383 It previously printed New Recyle flag is: no. This fixes bug
1386 kes Correct seg fault when switching tape drives during restore.
1387 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1388 be used until after 2.2.0 release.
1390 kes Remove fnmatch() in SD that permitted wild card specifications.
1391 This fixes bug #914.
1393 kes Fix %g in filename returned by SQL for browse tree reported by
1395 kes Fix configure so that it puts config.out in the cwd rather than
1397 kes Attempt to fix the locking problem reported by Eric in bug #906.
1398 kes Make berrno class to leave errno unchanged after constructor call.
1399 kes Make bnet_server use the heap rather than the stack to allocate
1400 its socket fd pointers to avoid a crash at termination. Problem
1401 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1403 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1404 and putting it in depkgs-qt along with Qt4.3.
1406 kes Rework code in acquire.c that switches drives for reading when
1407 the Media Type does not match. This should fix bug #906
1409 ebl Fix a director segfault during job setup #907
1410 kes Correct seg fault in postgresql when first operation returns no
1411 rows. Fixes Dirks File browser problem seg fault with bat.
1413 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1414 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1417 kes Implement PopUp YES/NO dialog for bat.
1419 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1421 kes Correct RunScript to terminate job in FD on failure.
1422 kes Change abort_on_error and AbortJobOnError to fail_on_error
1423 and FailJobOnError in RunScripts.
1424 kes Minor tweaks of code formating in RunScripts, principally to
1425 avoid depassing 80 columns.
1427 kes Eliminate one #ifdef Win32 in bsmtp
1428 kes Implement grow tool to grow a file for testing very large databases.
1429 kes Add big-vol-test to test Bacula seeking with > 5GB.
1432 kes Modify find_next_volume() to return all values in Media record.
1433 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1437 kes Update Release notes
1439 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1440 Warning, in previous beta version, all media get from scratch keep their
1443 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1444 This should fix bug #842. Made a note to look at removing the temp
1445 files at the end of the install.
1446 kes Add ability to mount and unmount a file device providing it is
1447 marked as being removable and has the appropriate mount and unmount
1448 commands defined in the Device resource. This fixes bug #830.
1449 kes When applying a storage override, release all previous storage
1450 definitions rather than just prepending the new storage.
1451 This should prevent a good deal of confusion.
1453 kes Implement ./configure search for qwt libraries.
1455 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1456 Win32 FD. This should fix bug #893.
1457 kes Remove an unnecessary beep in Win32 init code.
1458 kes Update copyright dates in Win32 executable about boxes.
1459 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1460 code with a BSD getopt.c and getopt.h.
1461 kes Remove sched.h from the Win32 compat directory -- not used.
1462 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1463 need to shut it down, do it through the services panel or the command
1465 kes Remove some inappropriate Bacula FSFE copyrights.
1466 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1467 kes Fix regress config non-portable test as pointed out by
1468 Florian Heigl <florian.heigl@gmail.com>
1469 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1470 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1472 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1473 Reported by Frank Sweetser.
1477 kes Fix client-only build.
1478 kes Integrate client-only fixes for bsys (initgroups) and conio from
1479 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1480 kes Make arguments to get_scratch_volume() in same order as other
1482 kes Rework the prune_volumes() subroutine so that after purging and
1483 no volume found in desired pool, it will check for a scratch
1484 volume. This prevents recycling the whole scratch pool.
1485 kes Add code to status storage to print boffset_t (largefile support).
1487 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1488 kes You now need a --with-qwt=<dir> to be able to build bat.
1489 kes Update src/win32/cats/bacula_cats.def to include the new
1490 db_get_query_dbids() call on Win32.
1492 kes Correct a problem when selecting a scratch volume and moving
1493 it to another pool that lost some columns.
1494 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1495 kes Enhance Autochanger error messages to include Volume and device name.
1496 kes Rework prune_volumes() code to take account of InChanger flag,
1497 and to handle recycling volumes going to the Scratch pool and
1498 current pool because the RecyclePool directive.
1499 kes Implement a better and more efficient db_get_query_dbids() to
1500 handle creating and passing back a list of DBIds.
1504 kes Start work on new more efficient DBId subroutine. First use
1505 will be for recycling volume to Scratch inchanger.
1506 kes Increase number of JobIds in pruning from 1000 to 10000.
1507 This to be replaced by above routine.
1508 kes Begin implementation of building Qt4 on Win32.
1509 kes Correct typo in fix I added for bad TLS shutdown.
1510 kes Pull 2.0.3 patches into patches directory.
1511 kes Update Release notes. Include qt-console in line count.
1512 kes Update Projects file.
1514 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1515 bug in migration code where a job that spanned two volumes
1518 kes Implement new BST_DESPOOLING blocked state. Change from locking
1519 during despooling in SD to blocking. This means that other threads
1520 can work with the device structure, in particular the reservations
1521 system while despooling.
1523 kes Fix return in reservation message queue that missed clearing
1524 the jcr lock (implemented 26Jun07 below).
1525 kes Rename a number of dev methods to make locking function names
1527 kes Document locking in lock.c. Move lock structures to new file
1530 kes Move reservations message lock to lock jcr only this
1532 kes Move main SD locking code into lock.c (new file).
1533 kes Update Win32 build to include lock.c
1537 kes Dirk committed the qwt library code for drawing graphs in bat.
1538 kes Tweak install of qwt so that it is integrated with ./configure.
1540 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1541 out by Eric (my typo).
1542 ebl Fix configure.in to get batch mode enable
1543 kes Return correct string from authenticate.cpp in bat when connecting
1545 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1546 spurious line drops when using TLS.
1547 kes Do not file reparse points when restoring a file that already
1550 kes Implement Windows reparse points -- similar to directories, but
1551 we do not descend into it. This is a first cut. They seem to
1552 be backed up, but restore is not yet tested.
1553 kes Remove restore_blocking in tls code when shutting a socket to leave
1554 it in blocking mode. Hopefully this will fix the encryption bug
1555 reported by Frank Sweetser.
1556 kes When opening a file for backup, tell the OS that we are going to
1557 read it sequentially -- optimization.
1558 kes Change variable names in authenticate_director() to not conflict
1559 with member names in bat. Caused great confusion with compiler,
1562 kes Queue openssl error messages in case of comm problem.
1563 kes Do shutdown() call if socket terminated.
1564 kes Remove some duplicated code in tls.c
1565 kes Move more of the bsock member variables into private and access
1567 kes Add Frank Sweetser's tls-test to the regression suite.
1569 kes Add Swedish sv.po file
1571 kes Don't print clock skew message in FD if less than 3 seconds diff.
1572 kes Add a bit of VSS info to status client.
1573 kes Implement a first cut of Vista VSS, using Win2003 code.
1575 Release: 2.1.20 beta
1577 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1578 loaded tape but uses first drive).
1579 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1580 This was indeed a Win32 issue.
1582 kes Simplify search of autochanger for in-use Volume.
1583 kes Fix exit condition of check for in-use volume. kes Remove
1584 inappropriate my_postgresql_free_result() in db_close()
1586 kes Fix bad return in FD when encryption signature not found.
1587 Probably caused a crash.
1588 kes Inhibit missing encryption signature error messages for
1589 file types where no signature computed.
1590 kes Correct inverted check on autochanger in reservation system.
1591 kes Tweak debug code in autochanger reservation.
1593 kes Add some additional locking in the cats directory in subroutines
1594 that modify packet variables called from batch insert.
1595 kes Rework how dcrs are allocated. new_dcr() can now be called
1596 with an existing pointer, and it will simply clean it up.
1597 This allows the reservation system to test various different
1598 devices, and will permit easy device changes.
1599 kes A bunch of changes all over to handle new new_dcr() calling
1601 kes Work more on the Volume management in the SD. Remember Volumes
1602 for tape drives and for autochangers (even virtual disk changers).
1603 kes When looking at the Volume list to reserve a drive, handle
1604 autochanger names correctly by interating through the changer
1605 devices. Also call the Director to see if a Volume is suitable
1606 for the current job.
1607 kes Fix some bugs in bscan. Make sure all media records are written.
1608 Make sure that valid JobMedia records are written for disk files.
1609 Previously they were completely wrong.
1610 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1611 that the URLs don't change and so that the developers will all
1612 work off the same copy. Rebuild from scrach.
1613 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1615 Release: 2.1.18 beta
1617 kes Fix seg fault in FD from incorrect digest size.
1618 kes Fix argument to non-OpenSSL crypto.c subroutine.
1620 Release: 2.1.16 beta
1622 kes Remove a few malloc()s from the encryption code.
1623 kes Use the class calls to bsock in filed/backup.c and restore.c in
1624 place of the old bnet_xxx code.
1625 kes Implement code that does an on the fly calculation of the
1626 signing digest during restore of encrypted files. It makes
1627 a best guess at the algorithm, and if it is not correct, will
1628 then revert to the old code which reads the file after it is
1630 kes Implement at least one missing crypto stream in stream_to_ascii()
1631 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1632 #877 where a reload with bad syntax causes Dir to exit.
1634 Cut: 2.1.14 beta (not released)
1636 kes Do not free a volume on a tape drive until another volume is
1637 mounted and read, or the autochanger unloads the volume.
1638 This should help the SD re-use volumes that are already mounted,
1639 and should fix bug #886.
1640 kes Apply patch from user brettedgar that allows gnome2-console include
1641 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1642 kes Apply patch from Lucien Weller that fixes day of week calculation
1643 because of DST flag problem. Fixes bug #887.
1645 kes Move find_next_appendable_volume() to after acquiring a valid device
1646 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1648 kes Unable to reproduce bug 872. However added additional testing for
1650 kes Bug #874 resolved by documenting SQLite limitations.
1651 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1652 kes Bug #881 resolved by removing typo in mtx-changer script.
1653 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1654 approval. Added a link to the wiki on the web page, and implemented
1655 a backup from http://paramount.ind.wpi.edu
1657 kes Fix update allfrompool to pass pool name.
1659 kes Convert to pure GPL v2 license.
1660 kes Fix sscanf problems reported by Peter Buschman that caused
1661 a bus error on Solaris.
1662 kes Rework (simplify) the select prompt in bat.
1663 kes Move get_jobid_from_tid() into lib and create a
1665 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1666 should definitely fix the problem of lost error messages in the
1668 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1669 kes Eliminate tcpd.h from the project. Enclose the #include from the
1670 library with extern C ...
1671 kes Add print of signal name when a signal is trapped.
1673 Release: 2.1.12 beta
1675 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1677 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1678 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1679 makes SQLit3 run 30 times faster, though a bit less safe.
1680 kes Implement --with-batch-insert in configure and detection of thread
1681 safe libraries. It is on by default, but turned off if no thread
1682 safe library (e.g. SQLite 2) is available.
1684 kes Fix Bacula PostgreSQL buffer overruns.
1685 kes Do better checking for NULL results returned from PostgreSQL;
1686 implement retry for failed queries; clear results buffer after
1687 failed query. Hopefully this will correct the PostgreSQL failures.
1689 kes Implement algorithm to handle only one appendable volume with
1690 Prefer Mounted Volumes = no.
1691 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1692 returned from a query.
1693 kes Make volume lock recursive.
1694 kes Implement an additional volume reservation algorithm that
1695 starts by considering all reserved volumes then uses the
1696 old brute force algorithm of searching the resources to
1697 find a suitable device.
1698 kes Add new reservations debug code and refine the old code.
1699 kes Update the win32/dll/bacula.defs file.
1701 kes Tweak reservations algorithm to permit a few more cases, i.e.
1702 volume reserved, but on different drive, ...
1703 kes Enhance SD status to include Pool and Media Type for drive in a
1704 more readable format (a bit longer).
1705 kes Fix PostgreSQL double free.
1707 kes Minor refactoring of restore decryption code.
1708 kes Add code to smartall.c to detect double free of a buffer.
1710 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1711 so that bsmtp will create a correct email address (mailbox only).
1712 kes Modify 'memory' command so that the buffers are listed as 'In use'
1713 to avoid confusion with Orphaned buffers.
1714 kes I reworked the OpenSSL include/lib flags to be handled in
1715 the standard Bacula way, which should fix bug #863 concerning
1716 non-standard OpenSSL libraries.
1718 kes Implement Help Browser window for bat.
1719 kes Fix reload bug that reset StorageId to zero.
1721 kes Fix TLS #ifdefing when TLS turned off.
1722 kes Ensure that when labelling a tape with Slot=0 that InChanger
1724 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1726 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1727 add DISTINCT (required by PostgreSQL).
1728 kes Implement BSOCK authenticate_director() method. Eventually will
1729 authenicate all daemons.
1730 kes Move several more functions into the BSOCK class.
1732 kes Add code to tell the OS that we no longer need a cached
1733 file that we were reading. In findlib/bfile.c. Also,
1734 only cache files that we are reading. Thanks to
1735 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1736 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1737 kes Implement script to automatically generate cats and dll .def
1738 files for Win32 dll.
1739 kes Update README.mingw32 to include new .def file generation.
1740 kes Correct typo in UTF-8 error message as reported by:
1741 jhernandez <julianhernandez@gmail.com>
1742 kes Add additional sm_check() code on debug level 1.
1743 kes Set default debug level to 1.
1744 kes Trap SIGABRT in attempt to get traceback.
1746 kes Reduce bat connect timeout from 30 to 15 seconds.
1747 kes More restructuring and implementing BSOCK class in place of
1749 kes Remove a few unnecessary malloc() tests in crypto code.
1750 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1751 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1752 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1754 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1756 kes Fix Verify InitCatalog. The attributes were not pointing to the
1757 correct saved location.
1758 kes Implement message callback so that GUI is sure to get all
1759 daemon messages. Currently displayed in a dialog in bat.
1760 kes Ignore SIGUSR2 (Bacula timer) in bat.
1761 kes Apply regress patch from bug #859 to allow regress to work
1762 with Solaris compiler.
1764 kes Begin adding TLS support to bat.
1765 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1766 clean up lex.c and make it more readable.
1768 kes Move more bnet functions into the BSOCK class.
1769 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1770 kes Complete change of berrno strerror() method to bstrerror()
1772 Release: 2.1.10 beta
1774 kes Cleanup incorrect email addresses in bsmtp.
1775 kes Make bat display initial messages rather than discard them.
1777 kes First cut of adding .mod to the run command.
1778 kes Implement auto display of messages in bat.
1779 kes Enhanced preferences to allow all Bacula output to be
1782 kes Try to make bsmtp date routines more generic.
1783 kes Fixed bug #856 autochanger documentation.
1784 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1785 kes Add new cats entry point so Win32 builds.
1787 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1789 kes Do better checking for the MySQL 64 bit libraries looking for both
1790 .a and .so libraries.
1791 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1792 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1793 kes Require the thread safe version of MySQL during configure. Thanks
1794 to Andre Noll for pointing this out.
1795 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1796 continuing in migration code.
1797 kes Apply implementation of tray-monitor font derived from gnome-console
1798 submitted by Andreas Piesk <a.piesk@gmx.net>
1800 kes Eliminate important memory loss in SQLite
1801 kes Fixed the batch insert MySQL thread specific data that was not
1802 being freed. See cats/mysql.c:db_thread_cleanup().
1803 kes Fix restore before command.
1804 kes Convert old hdr.name to name() in a few places.
1805 kes Implement update jobid command.
1806 kes Return all time_t dates in db_get_job_record()
1807 kes Stop watchdog in SD earlier.
1808 kes Put Pool just after Storage in please mount message.
1809 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1812 kes Update the po files.
1813 kes Fix Verify InitCatalog by making it cache attributes.
1815 kes Change name bacula-bat to bat for man 1 page to correspond to
1817 kes Check for client and store NULL pointers in status command. This
1819 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1820 kes Fix sign extended editing of %p.
1821 kes Clean out a little old #ifdefing in cats/mysql.c
1823 kes If time diff between DIR and FD is more than 600 seconds convert
1824 INFO message to WARNING.
1825 kes Implement heap size display in status for all daemons.
1826 kes Attempt to fix MySQL db open memory loss (not successfull).
1827 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1828 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1829 Query. This looks like a MySQL but but by doing extra releases,
1830 the memory goes away. This should fix bug #847.
1832 kes When backup fails, cancel SD before waiting for sd termination.
1833 kes If SD is waiting for FD to connect during cancel, wake up the
1835 kes Fix fsf code so that errno is correctly reported.
1836 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1838 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1839 so that Bacula doesn't later stumble into a seg fault.
1840 kes Use the term Restore Client in the restore Job report.
1841 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1842 the original job's FileSetId.
1843 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1844 spooling in migration jobs. Not yet tested.
1845 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1846 reading conf file from a pipe. However, do it with open_bpipe()
1847 rather than popen. Not yet tested.
1849 kes Fix an ugly bug where the VolCatBytes were getting updated
1851 kes Implement bconsole memory command that prints current memory
1852 usage, plus smartalloc dump.
1853 kes Clarify some error messages in backup, admin, and migrate.
1854 kes Shrink label dialog to smaller size.
1855 kes Invert Cancel OK buttons on restore to be OK Cancel.
1856 kes More strerror() to bstrerror() conversions.
1858 kes Start implementing bstrerror() in place of strerror().
1859 kes Stripping path -- seems to work.
1861 kes Prevent door and port files from being restored (mostly
1863 kes Free an unreleased buffer in compat code.
1864 kes Change console Job name from *Console* to -Console- to eliminate
1865 Win32 filename problems. Put Win32 path separator when creating
1866 Console file. This fixes bug #846.
1867 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1869 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1871 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1872 to force Win32 error message.
1874 kes First cut strip path. The data should be passed to the FD,
1875 but nothing is done with it yet.
1876 kes Enhance the digest and signature routines in the crypto
1877 library to accept a JCR and to use it to print error messages
1878 so that they will go in the Job report rather than the daemon's
1880 kes Simplify some of the verify signature code.
1881 kes Simplify a few of the alternative returns in the signature
1884 ebl Use only POSIX regex instead of GNU regex in breg.c for
1885 File relocation. It fix broken freebsd compilation.
1886 kes Convert all other Dir files to use new ua class message
1888 kes Tentative fix for missing digest signature in bug 807.
1889 kes Correct handle problem in new win32_ftruncate routine.
1890 kes Convert ua_purge.c and ua_update.c to use new ua class
1891 message routines for bat.
1893 kes Correct incorrect installation of LICENSE in Win32 installer.
1894 kes Display LICENSE at the beginning of the Win32 install.
1895 kes Attempt to correct the need for the png files to be installed
1897 kes Reapply my bat.conf install script in qt-console. I think I
1898 editted bat.pro instead of bat.pro.in and it was lost.
1899 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1900 the /var/lock/subsys for subsysdir. Also corrects typos in the
1903 kes First cut update job.
1904 kes Correct configure to include qmake of src/qt-console directory.
1906 kes Make restore job yes/mod/no print in one command so GUI works.
1907 kes First cut implementing backup and restore client.
1908 kes Correct editing in Verify output that caused a seg fault.
1910 kes Insure that bat.conf is not overwritten during installation.
1911 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1912 while I was implementing migration in March 2006 !
1914 ebl Cleanup file relocation, using char *RegexWhere instead of
1915 char *where + bool where_use_regexp
1916 kes Update some manpages and add bat manpage.
1917 kes Make a first cut at converting bacula.spec.in for bwx-console
1919 kes Apply patch from John Goerzen to add hostname as fourth argument
1920 to make_catalog_backup script.
1921 kes Fix typos I introduced into bsmtp.c
1922 kes Make pm_strxxx() routines handle input of NULL pointer. This
1923 is to protect from NULL pointers returned from SQL databases.
1924 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1925 kes Add more debug to FIFO code -- fix fifo regression test.
1927 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1928 kes Add thread timer to bnet_connect() to break from OS if wait time
1931 kes Update Win32 build to include new files, new symbols, and
1933 kes Implement socket level heartbeat (tcp_keepidle)
1934 ebl Commit File relocation patch
1935 kes Make bat have 'make install' target.
1936 kes Warn during install if old gnome-console binary found.
1937 kes Warn during install if old wx-console binary found.
1938 kes Add -8 option to bsmtp command line to add content type utf-8.
1939 Fixes bug #809. (Character coding problem in bsmtp).
1940 kes If < is found in target (from, to, cc) then do not enclose the
1941 target in < > in bsmtp. Fixes bug #772 (malformed address).
1942 kes When printing certain items in dbcheck, stop after 300000.
1943 Fixes bug #822. (dbcheck loops).
1944 kes Incorrect status in Dir after waiting for mount with poll set.
1947 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1949 kes Print waiting to reserve a device every 5 mins.
1951 kes Don't call close_part in label.c if tape and relabel.
1952 kes Don't free volume if busy in close() -- should help with
1954 ebl Fix #824 RunScript bug (After script could be execute twice)
1955 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1956 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1957 Add a regression script to test RunScript
1959 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1962 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1963 deprecated. No additional bugs will be fixed, and they will be dropped
1964 in a future release (probably 2.4.0).
1965 kes Change name of wx-console to bwx-console to make it more Bacula
1967 kes Change the name of gnome-console to bgnome-console to make it
1970 kes Some time in March, a Feature Request with patch from Jorj Bauer
1971 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1973 The ability for the director to validate a Client (FD) CN against
1974 an arbitrary set of patterns rather than the hostname, with
1975 A new 'TLS Allowed CN' set of directives which are implemented
1976 in the Client resource. Then pattern matching is used in place
1977 of hostname matching against the Certificate's CN. As an example, we
1978 have certificates which (a) use a local CA, and (b) have a CN of the
1980 kes Add new/changed entry points to Win32 build
1981 kes Create unaccepted-projects for projects that are not accepted.
1982 kes Simplify locking in the reservations system.
1983 kes Add more debug code in reservations.
1984 kes Make sure error condition on reserving a volume is handled correctly.
1985 kes Correct handling of volume_in_use.
1986 kes Correct handling of initializing a device.
1987 kes Move handling of broadcasting releasing a device into release_device().
1988 kes Correct attaching dcr to dev so that it is only done if device
1989 is properly initiated.
1991 kes Locking debug level tweaks in SD.
1992 kes Tweak new Volume code.
1994 kes Add exec external-command [wait-seconds] to bconsole. This
1995 executes the external-command. Note! normally external-command
1996 should be enclosed in double quotes.
1997 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1998 it should normally be off in a production system.
2000 kes Implement die command for SD so that we can force it to dump.
2001 kes Implement SD lock debug code.
2002 kes Implement new algorithm for keeping Volume list in SD. It
2003 is now owned by the device.
2005 kes Implement new code for freeing in use volumes that should
2006 resolve if not all, some of the problems of multiple drive
2007 tape conflicts described in bug 801.
2009 kes Fix gui/bacula-web/images files in svn.
2010 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
2012 ebl Fix a bug in batch mode (in string escape)
2013 kes Correct migration prune SQL typo that crept in in a
2014 recent 2.1.x change.
2016 kes Move bnet_despool() into class in bsock.c
2017 kes Modify job report to include director name and Build OS.
2018 kes Move drop root privilege and check_catalog() before fork.
2019 kes Add update database scripts (version 9 to 10) to updatedb directory.
2021 ebl Check size and age of each file after its backup to see if
2022 it has changed during backup, if 'checkfilechanges' is set.
2023 The FD will do an extra check (stat(2)) after
2024 each file backup. mtime, ctime and size are compared with
2025 'before backup' information. If time or size mismatch, an
2026 error message will be generated. You must upgrade FD to use it.
2028 kes Make database name and user configurable
2029 --with-db-name=xxx --with-db-user=xxx
2030 kes Add back database type to message.c for debugging.
2032 kes Implement dir_sql() which issues an SQL query.
2033 kes Modify bat medialist to use dir_sql() and do some minor C++
2034 formatting as well as eliminating a number of pointers, simplifing
2037 kes Fix some of the mtx-changer grep commands for tape label readers.
2038 kes Convert a number of bsendmsg into the appropriate send/warning/error
2039 message class calls.
2040 kes Suppress the using database message in the .sql command.
2041 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
2043 kes Add context menu for floating a window.
2044 kes Some minor cleanup and name changes in qt-console
2045 kes Add doing mt setblk 0 in Win32 mtx-changer.
2046 kes Apply Martin's bug fix to move definition of ENODATA for
2048 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
2049 sqlite2 and sqlite3.
2051 kes More pruning cleanup.
2052 kes Turn on wait_for_drive by default in mtx-changer.
2053 kes Turn on Batch insert code by default as it now passes regression.
2054 kes Add ./configure --enable-bat to enable building of Bat.
2055 No install yet though.
2057 kes Implement a new .sql command for bat.
2058 kes Implement code to turn off pruning in obtaining the next volume.
2059 Pruning is turned off for the status dir command, but turned on
2060 for SD requests and for the list nextvolume command.
2062 kes Correct Qmsg() that was not updated correctly when committing a
2063 previous change (probably the recent TLS patch).
2065 kes Write new subroutine is_volume_purged() that explicitly checks
2066 if the Volume is purged, and if so marks it as such. This should
2067 resolve problems reported about needing to mount twice to recycle
2069 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2070 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2071 amount of duplicated code.
2072 kes Do volume pruning only for the Media Type desired (reduces pruning time
2073 if multiple Media Types are in the same pool).
2074 kes Implement more detailed info in the Job report for the Bacula version
2076 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2078 ebl Add bbatch tool to bench database and insert mode.
2079 Fix sql quote stuff in batch mode
2080 Fix sql stuff for mysql
2082 kes Correct problems with am/pm scheduling. Fixes bug #808.
2083 kes Implement new prunning code that prunes up to 1000 jobs at
2084 the same time. The same technique can be applied to a number
2085 of other prune/purge subroutines.
2086 kes Add an insanity check when starting a new tape job to ensure
2087 that the tape position has not been changed. If so fail the
2089 kes Fix Win32 build for dlls to add the folllowing:
2090 src/lib/bsock.c -- new file with new entry points
2091 src/lib/dlist.c -- new entry points
2092 src/cats/sql_create.c -- new entry point
2093 src/cats/sql_cmds.c -- new DATA item exported
2095 ebl batch mode cleanup bscan-test is ok now.
2096 kes Implement SD code to check length of disk volume before appending.
2098 kes Correct return status on db_batch... routines.
2099 kes Add call to db_write_batch_file_records() to migration code.
2100 ebl Fix AfterJob timing
2101 kes Move the checking of the database in initializion of the Director
2102 to after we drop privileges. This avoids the need for both root
2103 and bacula access to the DB.
2104 kes Correct a misplaced variable definition in src/filed/backup.c
2105 kes Correct how the new batch insert db_create_attributes_record()
2106 uses the arguments. Caused a seg fault in bscan.
2107 kes Implement lock() and unlock() methods in DEVICE class.
2108 Implement block() and set_block(xx) methods in DEVICE class.
2109 kes Modify bnet_connect() so that it uses time() to check for the
2110 wait time expiring (on some OSes, some system calls may not
2111 return immediately).
2112 kes Modify Verify to obtain the previous JobId when it is actually
2113 running rather than at schedule time (as it was in 1.38.x).
2114 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2116 kes When checking pid in pid file, continue running if the pid is
2117 the same as ours. This occurs on IRIX after a system crash.
2120 kes Extend new GUI API.
2121 kes Make the ua structure a class, and implement send_msg(),
2122 error_msg(), warning_msg(), and info_msg().
2124 kes Apply fix from for building wx-console on the Mac from
2126 kes Implement new select mechanism for GUI programs.
2127 kes Reorganize initialization of stackedWidgets in bat.
2129 kes Add updated nagios plugin supplied by Christian Masopust.
2131 kes More bat implementation.
2132 kes File migrate bug with Pool Occupancy using mediaid instead
2133 of jobids. Fixes bug #795.
2134 kes Fix orphaned buffers in filed backup and verify due to
2135 crypto buffers not freed during errors. Fixes bug #789.
2136 kes Extend new GUI api code to tree commands.
2137 kes Ensure that tree and dot commands check console ACLs.
2138 kes Permit marking directory with trailing slash.
2139 kes Allow 20 console connections (instead of only 10).
2141 kes Add smartctl call to bacula-sd.conf as an example of getting
2144 kes Modify jobq.c to let simultaneous restore jobs run. This may
2145 cause them to fail if they cannot get a drive.
2146 kes Add Client Connect Wait to Storage daemon to permit users to
2147 modify the time the SD waits for a FD connection.
2149 kes Correct virtual changer check which was backwards. This caused
2150 volumes to be unloaded into slots already occupied.
2152 kes Apply Command ACL filter to JobId list in restore command.
2153 kes Correct typeo in var.c patch.
2155 kes Don't let Bacula prune File or Job records for the current Job.
2156 kes Fix variable substitution pad + inc bug reported (with patch)
2159 kes Correct SQLite log table index as reported by Luca Berra.
2161 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2163 kes Begin implementing new comm signals for API.
2164 kes Fix a few places in lib/message.c where the open fd may
2166 kes Continue implementing lib/bsock.c (real class). Make jcr,
2167 who, host, and port private. There are new methods to access
2168 them for non-class use. This required touching a number of files.
2170 kes Add LANG=C to autoconf/randpass so it works with languages other
2171 than English. Fixes bug #788.
2173 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2175 You will not be able to generate Include/Exclude list any more.
2176 It will be fixed soon.
2177 If you want to use this, you can apply
2178 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2180 kes Restore of sockets created false error messages because Bacula
2181 no longer restores sockets, but the code was still trying to
2182 set the attributes on a non-existent file. Reported by a user.
2183 ebl finish RecyclePool feature
2184 Media will takes Pool.RecyclePool
2185 when moving from Scratch to a Pool or when user will do
2186 update volume=xxx frompool
2187 To use it, add RecyclePool = aPool to your Pool resource
2190 RecyclePool = Scratch
2194 kes Expand new BSOCK class adding signal() and new BNET signals.
2195 kes Begin enhancing the dot commands adding a new API function
2196 that returns more information and will make it easier
2197 to interface to the Director from a program.
2199 kes Make DEVICE fd private. Its new name is m_fd, and can be
2200 obtained with dev->fd() outside the class. This is the
2201 first of many DEVICE members to be made private.
2202 kes Implement Michael Renner's idea on having a virtual disk
2203 changer. I made some minor modifications (e.g. I did not
2204 implement the Virtual Changer directive, but simply set
2205 the Changer Command to an empty string.
2207 kes Implement a BSOCK send() method that writes the whole record
2208 in a single write() request rather than in two.
2209 ebl add update volume=xxx recyclepool=yyyy
2210 volume takes recyclepool from pool when using update volume=xxx from pool
2212 kes Fix encryption deblocking bug, which caused some restored files
2213 to be truncated. This fixes bug #763.
2214 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2215 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2217 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2218 ebl Use btime_t instead of uint64_t in media patch.
2220 kes Optimize the use of the database a bit in the Status dir command.
2221 Only open it when needed, ensure that if any previous database
2222 was opened, it is closed.
2224 kes Correct VolCatBytes bug from media patch.
2225 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2226 in the case of orphaned records.
2227 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2228 and File records in 300K chunks to be more efficient. This
2229 idea came from Juan Luis Frances (if I remember right).
2230 kes Apply Eric's scratch patch that moves a purged Volume to
2231 the RecyclePool. Question: how is RecyclePool set? what
2232 happens to the ScratchPool?
2233 kes Apply Eric's media patch that collects read/write media
2234 times as well as byte counts. This patch requires a
2235 simultaneous upgrade of the DIR and SD. Note, there
2236 should be some way to turn off timing. I'm not sure
2237 times are in Bacula units.
2238 kes Apply Eric's batch-insert patch.
2240 kes Update projects list.
2242 kes Implement Include/Exclude file lists in FD as dlists using
2243 the new dlistString class. This permits efficiently having
2244 large include/exclude lists and completes project Item 25.
2245 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2246 console is authorized to cancel the job. This fixes bug
2248 kes Modify SD so that the VolCatJobs medium record is updated
2249 at the beginning of a Job rather than the end. This
2250 fixes bug #775 where exceeding MaxVolJobs caused jobs
2252 kes Added a mutex around getting and setting Volume information
2253 so that multiple simultaneous jobs will single thread.
2255 Switch to using Subversion
2256 kes Remove src/pygtk-console/ from configure
2258 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2259 plus the entrypoints.
2260 kes Apply patch supplied that corrects debug print
2261 in canceling jobs for max run time. Supplied as
2262 part of bug #621, which was previously fixed.
2264 kes Test on job_canceled() and sd_msg_thread_done inside
2265 loop starting the message thread to avoid a race condition.
2267 kes Remove rl_catch_signal from console.c as it conflicted
2268 with the header definition. Fixes bug #765.
2269 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2271 kes Clarify some stored/acquire messages to indicate if the
2272 problem is with read or append.
2274 kes Fix memory leak with storage ids in cats/sql_get.c
2275 kes Terminate watchdog earlier to avoid reference to released
2276 memory -- reported by Jason Austin.
2277 kes Move closing the database from jobq.c to the director daemon
2278 termination routine. This fixes memory leaks for shadow jobs
2279 (i.e. migration jobs).
2280 kes Free up the unique jobid chain items in migrate.c. This fixes
2281 a memory leak problem.
2282 kes Convert some ugly looking for statements to use foreach_alist
2283 in findlib/find.c. This will facilitate converting the structures
2284 to use dlist (for large include/exclude lists).
2285 kes Fix a bug in the btree.c and btree.h routines, then rename them
2286 rblist and add them to be built in src/lib. Include some new
2287 methods written by Rudolf Cejka that make the code more readable
2288 (hides some of the ugly casting).
2289 kes Add set_next() and set_prev() methods which make the code much more
2290 readable. Also add a new dlistString class that facilitates storing
2291 strings in dlists. To be used in the large include/exclude lists.
2292 kes Make some trivial modifications to lib/tree.h that use rblist
2293 rather than dlist for storing the tree links. This was suggested
2294 by Rudolf Cejka. The result of this is that the restore tree now
2295 uses red-black binary trees rather than simple linked lists. This
2296 should give rather dramatic speed improvements for directories
2297 contining large numbers of directories/files (more than 10000).
2299 kes Fix maxruntime bug #621.
2301 ebl Implement the include JobID in spool file name project.
2302 kes Reorder projects file in order determined by Jan 2007 vote.
2303 kes Implement item #12 on project list -- quick release of FD by
2305 kes Fix open of SQLite3 db where user does not have write permission
2306 so that DIR does not crash. Fixes bug #761.
2308 kes Add back missing @ in Win32 Makefile.
2309 kes Change 'Device not configured to autolabel' from INFO
2311 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2312 which should restart an indefinite # of times.
2313 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2314 other DIR specifications.
2316 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2317 Fix path quoting in SQLite scripts.
2318 Fix problems with SHGetFolderPath.
2320 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2322 kes Fix Job restart on error bug that promotes an Inc to a Full
2323 backup. This should fix bug #755.
2324 kes Add qt-console and first cut of code.
2328 kes Fix Bacula->Documentation link on Win32 to point to index.html
2329 instead of bacula.html. Fixed bug #750.
2330 kes Return JobId in db_get_job_record() when JobId==0. This should
2332 kes Do not release source pointers when restarting a failed job.
2334 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2335 This *should* fix bug #747.
2336 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2339 kes Modify USTORE constructor to set an empty store_source string,
2340 and don't copy the store_source string in a cancel. Hopefully
2341 this will fix Arno's seg fault, bug #744.
2342 kes Add back code to disable conio in configure. Fixes bug #743.
2343 kes Correct the Options scanner in the FD to correctly handle
2344 SHA1 option, which was eating the next option. Reported by
2346 kes Add code to indicate when the SD is spooling, spool wait, and
2347 despooling as requested by Alan Brown.
2349 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob