1 Technical notes on version 2.5
5 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
6 examples/database/dbcheck.sql
7 enhancement to wait command: wait mount ...
9 filepattern (restore with regex in bsr)
14 kes Fix bug #1046 VolumeToCatalog incorrectly reports mounted
15 filesystems as missing on the Volume.
16 kes Rewrite the set_jcr_job_status() code to include job status
17 priorities so that more important status changes occur but
18 lower priority status changes will not overwrite something
19 more serious. This could possibly cause reporting incorrect status
20 reporting in some cases. More testing is needed to ensure
21 I have the right priorities. This vastly simplifies the previous
23 Verify Diff status should now be correctly reported, whereas it
25 kes Reduce some debug output.
26 kes Apply Joao's patch to SQLite tables to make chars work.
28 ebl Fix #1175 About update slots that don't reset InChanger flag when
30 ebl Fix #1173 where prune_volume() returns a volume from the scratch.
32 kes Remove jobq.c constraint that read and write SD must be
33 different. This may lead to more deadlocks in the SD,
34 but they should be resolved there.
35 kes Ensure that job report is always printed even if job is failed
37 kes Don't print job report twice for failed VBackup jobs.
39 kes Fix editing of retention time difference to use 64 bit
40 int instead of 64 bit unsigned. This should permit very
41 long retention periods.
42 kes Implement code to prohibit a write job from appending to a
43 Volume that will be used for a read operation. This is
44 new code and could possibly cause some conflicts.
46 kes Integrate James Harper's Exchange Win32 plugin patch.
47 kes Apply patch from Marco van Wieringen that implements the new
48 Solaris libsec interface for ACLs so that Bacula can save and
49 restore both the new ACLs and old ACLs.
50 kes Marco's patch also corrects the file dependency generation code
51 so that it works properly both with shared libraries and static
53 kes Marco's patch also includes a small cleanup of the cats Makefile
54 to remove some references to non-existent files.
56 kes Modify win32 Makefiles to use full paths in most cases.
57 In particular add MAINDIR environment variable that points
58 to the main Bacula source directory.
60 kes Add read volume list code to SD -- not yet used.
61 kes Add James' binutils patch
62 kes Split volume management code out of src/stored/reserve.c into
64 kes Modify configure to do an automatic make clean. This ensures
65 that any changes to ./configure options are handled correctly.
67 Beta version 2.5.16 release:
69 ebl Rename JobStat table to JobHistory
70 kes Ensure that only normally terminated jobs are migrated.
72 kes Add Makefile dependency when using LIBTOOL_LINK so that any
73 change in ./configure options will be accounted for.
75 kes Fix typo in the ACL patch that I overlooked.
76 kes Apply Marco's libtool include patch.
78 kes Apply Bastian Friedrich's ACL patch to eliminate ACL
79 errors during restore.
80 kes Minor cleanup of create_restore_volume_list() code.
81 kes Fix typo in console Makefile.in
83 ebl Fix #1110 about RunScript that can't execute a script with
84 Unicode caracters in the path.
86 kes Apply tray-monitor patch from Bastian Friedrich to make it
89 kes Apply cleanup patch from Marco
90 kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
91 that implements libtool to create shared objects out of
93 kes Fix tray-monitor so it will speak to new FD.
94 ebl Fix bug with ansi label when volume name length < 6
95 ebl Fix segfault in debug level > 50 with btape.
96 ebl Remove warning message in btape when command is empty.
97 kes Fix Win32 build to pull in new BACULA define.
99 kes Change IncludeDir to Exclude Dir Containing.
100 kes Implement code to prohibit ExcludeDirContaining in an
101 Exclude section (same for Plugin and Options). A bit
102 of a kludge with RES_ITEM2 ...
103 ebl Add field to command list to restrict Runscript console
105 ebl Use a separate JCR when running Console command with Runscript.
106 ebl Permit to mark version as Beta in some ouputs
108 kes Add plugin types in jcr.h to reduce need to cast.
109 kes Do better checking of plugin return values.
110 kes Free plugin context after calling pluginFree() as
112 kes Allow plugin to call JobMessage with NULL context.
113 kes Do not add plugin to global list if loadPlugin returns error.
114 kes Rework plugin.h a bit to reduce dependence on Bacula.
116 kes Move generation of bsr file for Virtual Backup to run section
117 so that it is generated just before actually running.
118 Suggested by Graham Keeling.
120 kes Add malloc and free Bacula entry points for plugins. Increment
121 FD plugin interface version. Create a bacula plugin context
122 structure to keep track of whether or not the plugin is disabled.
123 kes Apply FileIndex fix for plugin name stream suggested by James.
124 kes List plugins in FD status report when debug > 0.
126 ebl Add a new VerId variable that is printed in version command.
127 kes Fix migration SQL not to migrate a job that has not terminated.
128 This is a partial fix to bug #1164.
129 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
130 backup start time bug reported by Graham Keeling.
132 ebl Fix possible bug in cancel_job() with job that are not
135 kes Fix bat build for Win32.
137 kes Copy plugin link field into ffpkt.
139 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
140 It provides FileRegex in bsr files and code to collect regex
141 from the user during restore, an Allow Mixed Priorities feature,
142 and documentation for the above.
143 ebl Remove db berkeley from configure process
144 kes Do dirty check on hostname (Linux only) and if not resolvable
145 use localhost as default.
146 kes Increase vtape max block to 20GB.
148 kes Refactor restore code to create a close_previous_stream(). This
149 This may destabilize the source.
150 kes Implement planned startRestoreFile() plugin call.
151 ebl Remove missing Loaded information from status slots storage command.
152 ebl Fix Console command problem that cancels the job
153 kes Add more plugin restore debug code.
155 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
156 kes Rewrite plugin restore interface a bit to correspond to how Bacula
157 creates and writes to the restored file.
158 kes Add some DebugMessage() calls to the bpipe-fd.c program.
160 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
161 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
162 Bat; allow add and delete in place of mark and unmark.
163 kes Another attempt to fix the endRestoreFile plugin bug noted below.
165 kes Apply dbi driver patch from Joao.
166 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
167 Bastien Friedrich reported the bug.
168 kes Create plugin instance only when FD job starts.
169 kes Add new FD plugin event: bEventCancelCommand when
170 a cancel command is issued to the FD.
172 kes Add cmd_plugin flag to jcr so we can globally know if a
173 command plugin is running.
174 kes If command plugin running, do not attempt (for the moment)
175 to get Win32 extended attributes.
176 kes Ensure that proper Win32 flags are set in bfile packet
177 if plugin_bopen() works on Win32.
178 kes Remove generated src/plugins/fd/Makefile
180 kes Implement build and install of bpipe-fd.so plugin.
181 kes Rework the interface that passes packets to the plugin
182 so that the packet is started and ended by the packet size.
183 This allows the driver to do a sanity check.
185 kes Rework the pluginIO Bacula internal code to enable
186 proper handling of Win32 error codes from GetLastError.
187 kes Apply Joao's patch to regress startover_libdbi.
189 ebl Add -B option to dbcheck to get catalog information
190 kes Fix Win32 build to include new library function.
191 kes Remove some old reader/writer code.
192 kes Implement ./configure --with-plugindir=xxx
193 ebl Fix the mysql bug in the new accurate code
194 kes Improve plugin debug. Create plugin test.
195 kes Set main thread specific data to INVALID because it
196 has no jcr. This allows debug output to work correctly.
197 kes Add src/plugins/fd/Makefile to ./configure process.
198 kes Make first cut attempt to correct SQL that computes the current
199 Pool usage. This is to fix bug #1159.
200 kes Do a bunch of plugin cleanups for Win32 and more careful checking
201 of PluginDirectory and whether or not a plugin was found.
203 kes This code should fix the race condition that leads to a Director
204 crash at job end time when the job list is updated. This was reported
206 kes Add more plugin documentation and fix include of config.h for
207 Win32 build (I hope).
209 ebl Revert to htable instead of rblist
210 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
211 tree instead of htable.
212 ebl Use a dedicate DB link to compute and send the accurate list
215 kes Fix compile errors in filed/fd_plugin.c.
217 kes Remove all double quotes from SQLite creating script and
218 replace by single quotes as suggested by John Huttley.
220 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
221 It significantly improves the performance of dbcheck for
223 kes Fix bad debug code call in src/filed/accurate.c
225 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
226 output. Perhaps we really need to implement M_SAVED.
228 kes Fix bug #1156 FD crash during processing of Accurate data.
229 kes Tweaks to htable code to improved debugging and make names
230 a bit more meaningful.
232 ebl Remove time_t from update_stats()
234 kes Modify the license of the example plugin program to allow
235 it to be used by anyone for making a Bacula plugin.
236 kes Make apply_rp_codes() in bpipe-fd.c be static.
238 kes Remove Encryption and Accurate lines in vbackup output -- not used.
239 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
240 kes Add host name to items printed during dump.
241 kes Make Check File Changes default on.
243 kes Set the default FD timeout to 3 minutes (previously 30).
244 kes Apply Bastian Friedrich's weird spelling correction patch.
246 kes Always print Verify hash differences. Rename variable to make the
247 code slightly more readable.
249 kes Correct tests for MaxFullInterval as reported by
250 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
251 kes Fix MaxDiffInterval code as well.
252 kes Enable Win32 plugin load code in lib.
253 kes Make Verify code that computes disk checksums use the same
254 algorithm as backup when dealing with sparse files.
255 kes Attempt to run VSS on any systems newer than Vista -- should
256 make it work on Windows Server 2008.
257 ebl Change the new statistic implementation. Remove the UseStatistic
258 directive and add a 'update stats [days=...]' command. You can
259 now decide when copy job records from Job table to JobStat.
260 Statistics are much more accurate with this.
262 kes Fix SQL case problem that may cause the failure of DiskToCatalog
264 kes First cut adding SD plugins.
266 kes Add Slot if it is non-zero to writing bsr file after a
268 kes Change a number of bnet_fsend() into class method calls.
269 kes Begin audit of diff of 2.4 branch to trunk code.
271 ebl Fix the mysql creation script that double-created an
272 index of the same field on the Media table.
273 Add an index to on VolumeName to the Media table for mysql.
275 kes Another try at fixing Vbackup. It looks much better this time.
276 Disable file index sanity check in FD with value stored in
277 attributes record because with Vbackup the File Index gets
278 changed, but not the attributes record.
279 Enhance some debug code.
280 Fix handling of re-indexing records that are copied in Vbackup.
282 kes Made level_to_str() know about Virtual backup.
283 kes Set correct Virtual backup write pool.
284 kes Fix compile warning in new dbcheck port code.
285 kes Fix migration code broken by previous virtual backup fix.
287 kes Fix problem of Virtual backup not writing a sequential FileIndex.
288 kes Reset Virtual backup time/date to the value from the last backup.
289 kes Ensure that storage name is passed to SD on read.
290 kes Correct a problem with Level and Virtual backup, rework how
291 bsrs are printed in debug to use standard routine.
292 kes Apply patch from Chris in bug #1133 that provides alternate db port
294 ebl Remove catalog dependency from bcopy tool.
295 ebl Modify catalog scripts to have an easier packaging integration,
296 using default variables.
297 Make difference between SQLite3 and SQLite in db_get_type()
299 kes Apply most of changes in a patch from:
300 Michael Stapelberg <michael+bacula@stapelberg.de>
301 that allow the Bacula FD to compile on IRIX 6.5.
303 kes Apply patch from Bastian Friedrich that accepts a yes on a
304 delete volume command line.
305 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
306 job when reading from one autochanger and writing to another.
307 kes Minor tweaks (copyright dates convert to use method instead of bnet).
309 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
310 drives when no tape is mounted.
312 kes Add additional info to some SD messages.
313 kes Add fix supplied by Martin Simmons for turning off EOL character
314 in new console multi-command code.
316 kes Fix a Verify InitCatalog problem where in certain cases
317 a garbage filename may be entered in the verification database. This
320 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
321 sent in by Riyas Yoosuf.
323 kes Fix seg fault in Dir during estimate command with no level value
324 given. This fixes bug #1140.
326 kes Add message to migration job when the target job is already migrated.
327 This closes bug #1129.
330 kes Raise some restore debug levels.
331 kes Replace off_t by boffset_t where ever I found it.
333 kes Define a machine dependent ioctl request type for use with
336 kes When a migration job actually runs, re-check the Job record
337 and skip if the job is already migrated. This should
338 significantly reduce the problems with bug #1129.
340 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
341 turn off glibc checks that prevent getting good dumps.
342 kes Implement console 'wait mount' command. Doesn't yet work.
343 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
344 kes Break the do_swapping into do_unload, do_swapping, and
345 do_load. It is much more logical that way.
346 kes Implement a set_dcr_from_vol subroutine in acquire.c for
347 reading volumes. This allows the dcr to be refreshed after being
348 zapped when the wrong volume is mounted.
349 This should fix bug #1126 -- During multiple tape restore, bacula
350 does not ask for physical tape change, but rereads same tape
352 kes Apply patch submitted for bug #1107 with a small modification.
353 This fixes a bug where bcopy copied too many records.
354 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
355 This fixes bug #1124.
356 kes Make the default bat restore Pool be Any. This fixes bug #1118.
358 kes Remove debug statement that crashes the SD at the end of
359 a tape during restore. Fixes bug #1125.
361 kes Implement Win32 bat changes made to Branch-2.4
363 kes Tweak separator command in console to start disabled and
364 allow defining no separator character. Also make code a
365 bit more fault tolerant.
366 kes Make btraceback write the traceback to the working directory
367 before attempting to mail it.
368 kes Add a RFC to Projects.
370 kes Attempt to implement a kludge to make Qt work with bat
372 kes Setup rstorage correctly. Virtual backups are working.
374 kes Move setting JobLevel and JobType into a method, which should
375 allow completing Virtual Backups.
376 kes Fix verify jobs to work again.
378 kes Virtual Backup tweaks -- it is close to working.
380 kes Ensure that SD tried to mount a volume not in an autochanger
381 at least once before asking for operator intervention.
382 kes Make SD aware of Virtual Backup jobs.
383 kes Add VirtualFull for bat.
384 kes Changes to get read storage correct for Virtual Backup.
386 kes Remove old code from label.c
387 kes Split display_display_info() out of write_bsr_file()
388 kes do_vbackup_init() working -- i.e. bootstrap file built.
389 kes Change Bacula trademark owner from John Walker to Kern Sibbald
390 kes First non-working cut of vbackup
391 kes Correct FD heartbeat code to use volatile variable accessed by
393 kes Zero thread id with memset if on Win32 in case it is a struct.
394 kes If cannot create JobMedia record, continue to try to write eof
395 and clean up in block.c
397 kes Add code to interface OpenSSL to new Win32 pthreads code which
398 used a structure for thread_t.
400 ebl tweak bat for win32 compilation
402 ebl Remove tokyo cabinet from the source
403 ebl Update configure/autoconf to support berkeley DB
404 ebl Add a sort to db_get_file_list() to improve bsr construction time.
406 kes Add a mtx-changer.conf file that is not overwritten during
407 an upgrade. It fully configures the mtx-changer script.
408 kes Clear in-use bit on vol when unused while swapping.
410 kes Remove sleep at end of ./bacula
411 kes Clear hash packet for hardlinked files correctly. This corrects
412 a long standing bug where hardlinked files selected individually
413 would occasionally not be restored.
415 kes Apply Eric's patch to ensure that autoprune does not return
416 a Volume not in the autochanger unless requested to do so.
417 kes Correct bat restore display of multiple drives. This fixes
419 kes Do find_a_volume() each time an unload is done. This
420 fixes the failure of maxvol2-test.
422 kes Add some SD debug code.
423 kes Do find_a_volume() each time an unload is done.
424 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
425 and adds --with-db-port to ./configure.
426 kes Use Qmsg() in job.c watchdog callback.
428 kes Release main control rwlock if ABORTing.
429 kes Make watchdog connect timeout queue messages rather than sending
430 directly to avoid lock conflicts with the real thread.
431 kes Add const char in dbd.c to avoid compiler warnings.
432 kes Fix python compiler string warning. Note, IMO the GNU C++
433 compiler guys have made a *very* bad change to their compiler.
434 They now force all strings to be 'const' unless you explicitly
435 cast them, which is extremely ugly and ruins nice code as well
436 as creates a lot of useless work.
438 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
439 mt. This fixes bug #1116.
440 kes Add const in python files to reduce compiler warnings.
441 This may have to be backed out because of later compiler
443 kes Fix failure of 2drive-concurrent-test. Always read label;
444 clear_unload() only after drive is defined in acquire_for_read().
446 kes Generally clean up the manual tape loading code. The main
447 conceptual change is that when a volume is marked to be unloaded,
448 its volume name is retained, and it is only marked as unloaded
449 when either the autoloader says it is unloaded or another tape
450 is read on that drive.
452 kes Add debug code and refactor subroutine in stored/mount.c
453 kes Fix format problem in bscan output reported in bug #1105.
454 ebl Fix get_next_volume_for_append logic with autochanger
455 - use pruned volumes if found
456 - don't reset the inchanger flag after getting a recycled volume
458 Fix recycle_oldest_purged_volume to take InChanger flag in account
460 ebl Add mmap/unmmap implementation for tokyodbm under win32
462 kes Make first step toward eliminating globals from config
463 scanning. Also should be a workaround for FORTIFY_SOURCE
464 GNU C bug -- fixes bug #1042.
466 kes Apply duplicate job tests to restarted jobs.
467 kes Copy more data when restarting a job so that run
468 overrides are kept. This should fix bug #1094.
470 kes More word alignment cleanup.
471 kes Fix bug where SD did not ask operator if the device could not
472 be opened. Reported by Eric.
474 kes Add dbuser to DIR conf file (replaces user).
475 kes Add --with-db-password to ./configure
476 kes Fix regress to handle db_password.
477 ebl Add new 'status storage slots' that list autochanger
479 ebl Update vtape driver to compile only under Linux.
480 ebl Fix a bug when restoring with a wrong mediatype.
482 kes Eliminate ints from conf files and structures to avoid
483 word alignment problems
485 kes Fix bug reported by Scott Barninger where the bacula script
486 refers to scripts in the wrong directory. Needed to meet the
487 requirements of recent FHS location changes.
488 ebl Disable vtape for FreeBSD.
490 ebl Modify disk-changer to check if slot contains something before
493 ebl Fix vtape on win32 and debian.
494 ebl Fix autoselect patch (cause segfault).
496 ebl Fix autoselect option broken for a while. Fix #1089. Need some
497 work with StorageId to be able to use a particular drive in a
500 ebl Rename vtape to vtape.
501 ebl Update vtape driver.
503 ebl Modify vtape driver to avoid sparse file.
504 kes Add make clean of qt-source directory during ./configure
505 kes Store last block number written to tape in DEVICE and
506 use it for testing for correct last block on EOT.
508 Release Version 2.4.0:
512 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
513 This fixes bug #1095.
515 kes Add create_postgresql_database.sql to Win32 installer. Should
516 fix problem reported by Juilio Monteiro.
517 kes Get correct slot when auto unloading a device. This fixes bug
520 kes Fix multiple media restore.
521 kes Make DEVICE Slot private and access it via a method.
522 Allows better control over when it is set and cleared.
523 kes Fix possible seg fault if SQL error.
525 kes Add Martin's fixes to argument scanning for the estimate
526 command. This fixes bug #1093.
527 kes Add debug code to SD.
528 kes Fix renaming a Volume, which used the wrong Volume name.
530 kes If operator has rewind tape, print warning, release tape and
531 try once more. If tape is positioned somewhere, something went
532 wrong, so mark the tape in error and try once more. Previously
533 this error was fatal, now it produces an error message.
534 kes Ensure correct volume name displayed during restore
535 kes Ensure that Volume is mounted for restore.
537 kes Fix a few more Coverity reported problems.
539 kes Apply Allan Black's status dir job count patch.
540 ebl Add information about IMPORT/EXPORT slots in mtx-script.
541 kes Enhance a couple of SD debug messages.
542 kes Tweak unload flag setting and ensure it is set during swap.
544 ebl Fix #1091 about bad output in estimate command.
546 kes Modify autochanger locking to attempt to avoid race
548 kes Make sure device not busy before doing label command.
549 kes Display open() errors except when polling. Previously too
550 many were suppressed. This should fix bug #1070.
551 kes Fix Win32 reparse points. Bacula will not recurse into any
552 reparse point directory, including mount points, unless the
553 directory is explicitly mentioned at the top level (same as
554 with Unix). A file that is linked to another file will be
555 backed up -- much as Unix does for hardlinked files.
556 This fixes bug #1041.
558 kes Remove double quotes from ChangeLog and ReleaseNotes
559 kes Remove StorageId test when pruning and recycling (Eric's changes).
560 kes Remove old form of locking when getting volumes -- causes deadlock.
561 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
562 the name unique and to eliminate compile time error.
563 kes Add accurate.o to Win32 FD Makefile
565 kes Fix cats dll build on Win32 after db_update_job_end_record
566 calling sequence change.
567 ebl Switch to tokyo dbm instead of htable in accurate code
568 ebl Include tokyo dbm to bacula source tree
570 kes Fix buffer overruns detected by Coverity.
572 kes Tweak joblog display.
574 kes Implement --without-qwt
575 kes Fix layout of restore tree dialog
576 kes Add configure bat QWT libraries, so that bat can be built
577 with or without the QWT libaries.
579 ebl Add dummy tape driver for regression tests.
580 kes Make sure we unload the right slot when swapping.
582 kes Add debug times, reduce size of two-pool-changer test
584 ebl Tweak autoconf scripts for vtape
586 kes Improve SD reserve debug code.
587 kes Testing an improvement to free up volumes no longer in use.
589 kes Rework SD acquire for read to handle autochanger Volume
591 kes Implement regression that explicitly tests swapping a Volume
592 from one drive to another.
593 kes Enhance disk-changer to detect most error conditions.
594 kes Fix SD code so that it properly swaps a Volume between drives.
595 This fixes bug #1083.
597 kes Apply libdbi patch from Joao Freitas for regress and for
598 Bacula trunk. Regress now works with libdbi. Nice.
599 kes Apply .nobackup patch from bug #1077 submitted by
601 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
602 name into jobs cloned via the run directive.
604 kes Prevent a Volume that is being swapped from being freed from
605 the volume list. This will most likely fix, at least partially,
607 kes Fix strippath so that it does not get a buffer overrun and crash FD.
608 This fixes bug #1078.
609 kes Remove 50 millisec wait in SD that broke debugger.
610 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
611 that a job may run, counted from when the job was scheduled.
612 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
613 a job may block waiting for a resource, counted from when the job starts
614 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
615 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
616 that implements multiple commands per line in the console when using
617 readline. Modify the default to use a semicolon as the command separator.
619 ebl Fix SQL query in migration code.
620 ebl Make accurate mode with hash disk pass regression tests
622 ebl Implement first cut of accurate backup with hash disk.
624 kes Force unload of volume when wrong volume mounted in SD.
626 kes Fix bat seg fault at termination.
627 kes Add Bacula generated version to bat about box.
630 kes Experiment with allowing multiple read jobs.
631 kes Move final volume swapping code to DCR method and
632 call it from acquire_for_read().
633 kes When wrong volume is mounted during read, unload_autochanger.
635 kes Integrate the libdbi changes from Joao Henrique Freitas
637 kes Stop searching for Volumes in SD askdir if DIR returns the
638 same volume name twice in a row.
639 kes Close bat console windows first to eliminate error message
642 kes Tweak the swap Volume from one drive to another code so that
643 it now seems to work.
644 kes Resolve several problems with recycling that broke the new
645 code (these problems are in 2.2.9 as well).
646 kes Remove the volume lock when calling the sysop code.
647 kes Don't mark a reserved volume with no writers as unused otherwise
650 kes Rework class structures for VOLRES, DCR, and DEVICE to make
651 the method names a bit more logical, and for more logically
652 handling the responsibilities.
654 kes Remove redundant code in terminating the scheduler that just
655 causes a seg fault in many cases.
656 kes Cleanup releasing a volume and make it a DCR method.
657 kes Improve algorithm for detecting pre-reserved volume and
660 kes Tweak volume swapping code so it works.
661 kes Correct name overloading in mount.c
662 kes Replace released flag in VOLRES with reserved and add access
663 methods for the VOLRES class.
664 kes Prevent volume from being released while being swapped.
665 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
666 plugin that add %w (where) and %r (replace flag) editing to
668 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
670 kes Refactor parts of stored/mount.c
672 ebl Add sanity checks for VolWriteTime and VolReadTime
673 ebl Take care of bad clock changes while computing VolWriteTime
674 and VolReadTime. This should fix or limit #1066
675 kes Correct error string numbers in dird/catreq.c
676 kes Restructure reserving, acquiring, and mounting volumes. Calls to
677 autochanger are deferred for mount.c -- simplifes the code.
679 kes Do not prune any running job. It just fails the job.
680 kes Lock the volumes when changing dev->reserved_device and marking
681 the volume unused otherwise the device can get reserved by
682 another job before the volume is released, thus blocking it.
684 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
685 kes Fix bug #1063, reuse of freed ptr in list nextvol.
686 kes Release regex compile buffer in filed/job.c
687 kes Add proper type of const char in sql_create.c
688 kes Turn off debug in daemon termination routines
689 kes Move free_volume_list() before devices are freed in stored.c
690 kes Fix reference to uninitalized stack variables in bregex.c.
691 This should correct bug #1067.
693 kes Fix possible seg fault in SD when freeing a volume entry.
695 kes Implement unload_dev() before swap device.
696 ebl Add statistics prunning with option and menu
697 kes Separate unload_dev() from unload_other_device() in autochanger.c
699 kes Apply patch from bug #1069 that corrects spurious error messages
700 when ACLs enabled on SGI but no ACL exists.
701 ebl Fix small segfault in bacula-sd when debug level is 500
702 kes Modify run_program() and run_program_full_output() to use
703 call by reference for the results string. This corrects a long
704 standing problem where the address of the string may be changed
705 in the subroutine but not in the calling program.
707 kes Re-enable code to remember last volume mounted on a non-tape
709 kes Add patch supplied in bug #1068 that fixes a SD crash when using
710 a Virtual autochanger.
711 kes Generate correct JobMedia records during spooling/despooling when
712 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
713 <tih@hamartun.priv.no> for excellent analysis and testing.
715 kes Tweak hash algorithm for htable using Martin Simmons idea
716 for doing a circular shift.
717 kes Remember what volume is in VTLs (previously turned off for
719 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
720 pointed out some problems in creating JobMedia records during
721 spooling with concurrent jobs. Fix the problem by updating the
722 start file position before despooling and generate a jobmedia
723 record at the end of despooling.
725 kes Fix handling of JobMedia records during spooling and when a
726 Volume is changed without actually writing data to the Volume.
728 kes Rework certain SD locking based on gdb tracebacks of deadlocks
729 sent by Eric. This code now uses only the volume_lock() rather
730 than the reservations lock when at EOM and acquiring a new
732 kes Ensure only one exit point in several subroutines.
734 kes Implement bsock code to permit locking. Use the new code in Verify
735 in the FD to prevent the heartbeat thread from disrupting the Verify
736 data sent to the Dir.
737 kes Modify SD locking to eliminate locking the reservations system from
738 outside the system. Use the volume lock when getting media data
739 and reserving a new volume at end of media.
740 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
741 when SD starts are not locked into place.
743 kes Fix error compiling runscript code on 64 bit machines.
744 kes Tweak Win32 mount point code.
745 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
746 cleared giving bad file estimate).
747 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
750 kes Keep Schedule run lists in order as suggested by
753 kes Implement autostart scripts for Debian.
754 ebl Implement upgrade catalog scripts.
756 ebl Apply jobstat patch for long term statistics. Have to implement
757 purge stats command and upgrade scripts.
758 kes Fix mtx-changer.in for broken Debian mt program.
760 kes Fix large number of JobMedia records reported by Eric Bollengier.
762 kes Apply doc fix from bug #1062.
763 kes Resolve crash and improper restore wx-console Win32 restore
764 GUI. Fixes bug #1065.
765 kes Update Win32 wxWidgets to latest version.
766 kes Attempt to do correct handling of Win32 mount points. Should
768 kes Fix Win32 FD backup/restore memory leak due to improper termination
769 of BackupRead/Write. This fixes bug# 1038.
771 ebl Reduce memory usage for accurate backup, working only with ctime
772 and mtime. (not all Lstat field)
773 About 40MB for my Linux system (400.000 files)
775 kes Add dcr->reserved_volume flag that allows us to release a volume
776 even if it is not vol->released. This allows maxvol2 to work when
777 Volumes expire and we are already writing to the device (i.e. a
778 volume is pulled out from under us by another job terminating after
779 we reserve the drive).
781 ebl Permit multiple command/console per runscript definition.
782 RunScript { command = /bin/true ; command = /bin/false ... }
783 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
784 (restart an application) just after the VSS snapshot on windows.
785 kes Don't zap dcr values during release_volume() as they might
786 have the next Volume to be mounted.
787 kes Fix AIX prototype.
789 kes Second cut of drive switching during backup.
792 kes Update Win32 version of wxWidgets to most recent version.
793 kes Tweak Copy job details.
794 kes Rework dir_find_next_appendable_volume to make a bit more effort
795 to find a suitable volume before giving up.
797 kes Make ask_sysop_to_create... to return if waken from wait.
798 This helps get out of blocked conditions.
799 kes Experimental implementation of switch_device in reservations.
800 kes Implement FD version to allow easier protocol changes.
801 kes Add Plugin Options string -- not yet passed to FD.
802 kes Implement PluginOptions ACL.
804 kes Attempt to correct problems with restores with autochangers and
805 use counts going negative
806 kes Rework SD status command and implement API for bat. Implements
807 header, runing waitreservation, devices, volumes, spooling,
808 and terminated status keywords.
809 .status storage=xxx <keyword>
810 kes Clarify TLS error message by adding double quotes around name.
811 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
812 kes Pass jcr to tls routines so debug messages can be handled better.
813 kes Rework jobq resource allocation code, and possibly fix a bug
814 that caused reference counts to get out of sync.
816 kes Rename fd/dir plugin to use Bacula standard underscore.
817 kes Plugin work -- bring dir up to fd level.
818 kes Start implementation of VTL code
819 kes Fix Win32 build after adding new cats subroutine.
821 kes First cut at Duplicate Job implementation.
823 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
824 kes Start PluginOptions string, and refactor a bit of ua_run.c
825 ebl Apply Allan patch that permit to reset recyclepool.
827 kes Test patch -- possible fix or improvement for bug #1053
828 kes Refactor FD and SD status commands to permit new API code in
829 SD, and to fix Win32 build.
830 kes Win32 build is now working.
832 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
833 some ideas in patch from Scott Bailey.
834 kes Begin implementation of duplicate Job control.
835 kes Fix some of Win32 build after recent additions.
836 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
837 which causes the FD to detect whether or not the OS has the
838 honor no dump bit (*BSD systems), and if so, to skip backing up
839 any file with this bit set. The feature is enabled by setting
840 'honor no dump flag = yes' in the Options section of a FileSet.
842 kes Correct po warning message with datarootdir
843 kes Implement more code in dird.c to put configuration parsing in
844 a class rather than use globals.
845 kes Restructure SD status command for implementation of bat API
848 kes Suppress incorrect 'Will not descend from x into y' messages.
849 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
850 daemon globals used by parser.
851 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
853 kes Fix free of plugin_list when none exists.
855 ebl Apply accurate project patch.
857 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
858 on non-mempool object)
859 kes First cut of converting FD .status to work with bat API.
861 .status client=XXX header
862 .status client=XXX running
863 .status client=XXX terminated
864 kes Implement first cut of Copy Job.
865 kes Implement Catalog in Pool resource. It overrides catalog specified
866 in the Client resource.
868 kes Apply patch (with some difficulties) from Joao Henrique Freitas
869 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
871 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
872 ftruncate() actually works. In the case of some (cheap) NAS devices,
873 it does not, and so recycling NAS Volumes does not work. The code
874 simply unlink()s the file, then recreates it. This fixes bug #1011.
876 kes First incomplete cut of big malloc blocks for htable.
877 kes Tweak plugin code.
879 kes Plugin debug code + tweak a couple bat dialog layouts
881 kes Fix creating first JobMedia record during Migration to include
882 proper index. This caused slow restores of migrated jobs.
883 kes Temp fix to plugin name file_index.
884 kes Bacula backed up and restored a MySQL database.
886 kes Implement plugin restore.
887 kes Implement parsing of db_driver to give db_type index.
889 kes First cut of plugin restore code.
890 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
891 and do not strip paths on symbolic links.
892 kes Set catalog backup database and user name from values specified on
893 the ./configure line.
894 ebl Fix #1031 about wrong pool source information in job report.
897 kes Remove a redundant jcr argument to find_files, match_files, and
899 kes Implement '.status dir header|scheduled|running|terminated' that
900 prints the requested status section. With the exception of the
901 header, the other reports have fields separated by tabs (\t).
903 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
904 a resource embedded run command to find a since time if no explicit
905 since time was supplied on the command line.
906 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
907 that updates the state file at job termination time in addition to
908 when the daemon terminates.
910 kes First version where a plugin did a backup.
911 bpipe-fd.so created a backup file, wrote a test
912 string to it, and Bacua could restore this fabricated file.
914 kes Implement DB Driver = string for the DBI driver.
915 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
916 kes First cut of code for loading Win32 plugin dlls. Implement
917 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
918 and implement a dlfcn.h file based on opengroup's definitions of
921 kes First cut plugin directives.
923 kes Apply patch from bug #1049 to prevent stripping the path on a
925 kes Attempt to fix bug #1047 where stripping a path corrupts the
926 heap. Waiting for feedback.
927 kes Correct the Mount message not to suggest labeling a new tape
928 when doing a restore. Submitted by email by John Stoffel.
929 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
930 FD by using casting. Reported in bug #1042.
932 kes A bit of crypto cleanup. More later.
934 Release Version 2.2.8
936 kes Apply patch from Martin to correct bug #1040, bscan sets existing
938 kes Fixed important spelling error in doc -- bug #1045.
940 ebl Fix bextract to be able to extract non-portable Win32 data to
942 kes Move initialization of read/write res lock earlier in the code.
943 This fixes the crash with a null conf file. This fixes bug
945 kes Redefine CURES in lib/parse_conf to be URES and move it all
946 into lib/parse_conf.c -- this responds to bug #1042, but does
947 not fix it. The fix is not to compile with FORTIFY_SOURCE.
948 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
949 the trunk SVN. I don't think this was reported as a bug.
951 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
953 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
955 kes Add DataDespooling and DataCommitting status (committing is
956 the last despooling).
957 kes Finish implementation of new reservations code noted below.
959 kes Fix bsnprintf for float point numbers. I broke recently when
960 parameterizing some variables. This fixes bug #1036.
961 kes Undo recent reservations changes ... will apply them later
962 when they work better.
964 ebl Fixes #1034 which cause mysql to hang the connection after 8h
965 ebl Change default statistics target of filename.name and path.path
966 fields for PostgreSQL. This speeds lookup by indexes. Thanks
968 kes A few more tweaks to new reservation code. Make sure to clear
969 vol released flag when retaking volume. When reading label and
970 label is bad mark volume unused. When recycling, mark volume
971 unused so it can be renamed.
973 kes Fix reserve_volume() so it doesn't release a volume in use
974 (i.e. a volume entry not marked released). This should be
975 the last part needed to fix bug #1018.
977 kes Move Heartbeat documentation from Job to Director resource.
978 This fixes bug #1033.
980 kes Fix existing switch drive SD code to call autochanger to release
981 any old volume. This must be done to keep the autochanger from
982 releasing subsequently newly reserved volumes in doing a close().
983 This should fix bug #1018.
984 kes Fail if attempting to get console input in batch mode. This
985 should help fail RunScript console commands that are incomplete.
986 kes First cut implementing switch_drive() in SD (not actually called).
988 kes Implement first cut running console commands in a RunScript.
990 ebl Fixes bug #1028 where 'Selection Type' option was not usable
992 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
995 Release Version 2.2.7
997 kes Add new free_tls() entry point so that Win32 builds.
998 kes Fix compile warning in src/lib/util.c
999 kes Fix entry point for edit_job_codes() so that Win32 builds.
1000 kes Fix seg fault Frank Sweetser reports in regression testing
1001 on his systems. The problem was that the original author of
1002 bsnprintf.c did not take into account the side effects of
1003 using ++x in the argument to a #define.
1004 kes Make SD protocol backward compatible with version 2.2.x.
1006 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
1007 because Bacula no longer restores sockets.
1008 ebl Always use ignorecase fileset option on win32 FD.
1010 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
1011 that implements double quoting include names in conf files,
1012 and also allows piping input by having the first character
1013 be a vertical bar (|).
1014 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
1015 that implement %f in RunScripts to pass the FileSet name.
1016 kes Skip leading | when lex input comes from a pipe as suggested
1017 by Michael Stapelberg <michael@stapelberg.de>.
1019 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
1020 Nerijus Baliunas <nerijus@users.sourceforge.net>
1022 kes Implement Plugin Directory and plugin events.
1024 kes Implement a security enhancement: TLS authentication but no
1025 encryption. Enabled by setting 'TLS Authentication = yes'.
1026 Note when this is on, TLS encryption is turned OFF!
1028 kes This patch corrects a problem where the maximum concurrent storage
1029 jobs counter gets out of sync during restore jobs causing jobs to
1030 'wait on max Storage jobs'. This patch fixes bug #1009.
1032 kes This patch fixes bcopy so that it produces correct Volumes.
1034 kes This patch eliminates spurious output to the console during a VerifyVolume
1035 job that contains encrypted data. It fixes bug #1024.
1037 kes This patch prevents the 'status dir' command from trying to use a scratch
1038 volume and possibly moving it from one pool to another. This patch fixes
1041 kes Add new include to postgresql.c suggested by Marc Cousins so
1042 that it compiles correctly with pgre version 8.3.
1044 kes Fix --archivedir addition to configure. Replace it with
1045 --with-archivedir in configure.in This fixes the regression
1047 kes This patch fixes bug #1012 where the job is canceled because
1048 of Max Run Time exceeded when the job has not yet started.
1050 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
1051 one 'part' to write. Instead of each part being stored on disk,
1052 written to DVD, then deleted from disk, all parts are written to disk,
1053 and only the last is written and deleted from disk.
1054 kes This patch fixes the status command to include the formating string for
1055 JS_AttrInsterting. It fixes bug #1021.
1056 kes This patch should fix the Mac OS X build problem on the latest
1057 Darwin, where sys/types.h was not included correctly (apparently
1058 due to a change in the Mac headers). The solution was to explicitly
1059 ensure that it is defined for the ./configure.
1060 This patch also has a rebuild of configure that includes the Debian
1061 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
1062 kes This patch should ensure that queued messages to the console are
1063 displayed as soon as possible. It should fix bug 1007, but has been
1064 reported not to work.
1066 kes This patch fixes the infinite loop when trying to increase the
1067 maximum number of volumes in a Pool during the add command.
1068 This patch fixes bug #1008.
1070 Release Version 2.2.6
1072 db Remove extra data on estimate command in joblist for bat.
1074 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1075 really change anything, but is the beginning of doing it *right*.
1076 To do it completely right the LastWritten date must be passed to
1077 the SD, but it is not yet done.
1078 kes Minor tweaks to some bat restore SQL.
1079 kes This patch fixes bug #1003 where putting the message output from
1080 a Verify job into the catalog results in a recursive loop. The problem
1081 seems to show up only with postgresql (to be verified).
1082 kes Correct %x to %p in postgresql debug statement.
1084 kes Fix bug #942 where lots of emails where generated when the heartbeat
1085 interval was low and Bacula wanted a different tape from the one in
1088 ebl Add new SD despooling attributes and Dir inserting attributes
1089 job status codes in the catalog (Status table).
1091 ebl Use qmake-qt4 instead of qmake when available (debian system).
1093 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1094 that passing the password via the command line (arg 3) is insecure.
1095 This responds to bug #990 (it doesn't fix it).
1097 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1098 kes Fix a crash in bat when it cannot connect to the Director for example
1099 if the Director is not running.
1100 kes Remove redundant INDEX (JobId) from File table in the trunk.
1101 This fixes bug #992.
1102 kes Make explicit exception to GPL in LICENSE to permit linking
1103 the Win32 FD with Microsoft VSS code.
1104 kes Apply the Solaris package patch from
1105 Masopust, Christian <christian.masopust@siemens.com>
1106 kes Apply the patch to optionally add a timestamp in the debug output
1107 submitted by Mariusz Czulada <manieq@wp.eu>.
1109 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1110 backend (sql_strerror). Fixes bug #989
1112 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1113 It applied with no problems.
1114 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1115 awk are on the path.
1116 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1117 since the status is returned on stderr on Solaris.
1118 kes Activate Close button on tray-monitor window. This fixes
1120 kes Check for NULL item in parse_conf.c before calling it. In the
1121 case of Device, there is no item and this caused a seg fault when
1122 Device appears in the conf file.
1123 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1124 avoids pulling in config.h multiple times in some new code.
1126 kes Fix spurious warning message printed when creating a volume with
1127 a LabelFormat. This fixes bug #976.
1129 Release Version 2.2.5
1131 kes Add JobId in place of Job name in all the Jmsg() output.
1132 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1134 kes Make maxvol-test and new more strict maxvol2-test work.
1135 kes Print JobId in all Jmsg() job output.
1137 kes Add new SD despooling attributes and Dir inserting attributes
1138 job status codes. This fixes bug 961.
1139 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1141 kes Fix doc issue. This fixes bug #963.
1142 kes Fix listing performance problems in bat. Pointed out by
1144 kes Remove old debug code.
1145 kes Fix bat code that tests for Win32. This should fix bug #968
1146 kes Query 5 list wrong Vol after migration. This fixes bug #960
1148 ebl Fix #969 where user can't change Replace option in restore menu.
1150 kes Save jcr in thread specific data (tsd) for each thread.
1151 kes Make Dmsg() print JobId as -%u.
1152 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1153 for the thread if it exists.
1154 kes Remove old reservation debug jid code.
1155 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1156 ebl Add an option that permit to specify spool size in job
1157 definition. (Applying patches/testing/spoolsize_per_job.patch).
1158 You must upgrade SD and DIR at the same time.
1159 dvl Add new configuration item --archivedir
1160 dvl Adjust regression tests to use tmp not /tmp. This will allow
1161 multiple concurrent runs of the regression tests.
1163 kes Fix race condition that drops final block written to volume.
1164 This happens in rare cases with multiple simultaneous jobs
1165 when the Volume fills. This fixes bug #964. May be related
1166 to bug #935 and possibly #903.
1167 kes Eliminate more strerror() and replace with bstrerror().
1168 kes Remove BSD getopt and replace with unrestricted IBM version.
1169 kes Fix Win32 build for changed calling sequences.
1170 kes More tweaks to the mount volume routines to get everything
1171 right. Changed variable name from find to have_vol, which is
1172 much easier to understand.
1173 kes Enhance btimer debug code.
1175 kes Fix FD->SD authorization failure, which was due to spurious
1176 wakeups from a pthread_cond_timedwait(). Simply check the
1177 predicate before continuing. This fixes bug #953.
1178 kes Add const char where needed (more to do). Remove temp debug code.
1180 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1181 kes Don't overwrite error message in check_tables_version.
1183 kes Unlock batch insert tables with same calls used elsewhere.
1184 kes Allow starting 59 jobs a second.
1185 kes Make SD session key more random.
1186 kes Add retry for SQLite opening db if it fails. Probably helps
1188 kes Suppress extra error messages during batch insert failure.
1190 kes Add jcr to timer packets so if killed message can be sent to job.
1191 kes Add JobId to all Dmsg() output.
1192 kes Put some FD auth code on dbglvl rather than fixed.
1193 kes Return insert attributes error message in db msg buffer to avoid
1194 false error messages. Helps fix bug #966.
1195 kes Separate batch init error messages. Probably helps fix bug #966.
1196 kes Make SD code that contructs attribute insert check string lengths
1198 kes If Dir gets an error during inserting attributes, cancel SD.
1199 This reduces unnecessary error messages.
1201 kes Correct search boolean for getting Volume info
1202 ebl Cleanup batch insert code. Probably fixes bug #965.
1203 kes Back out one small change to the reservation system (reserving a volume).
1204 kes Rework how a Volume is mounted. It is now much more intelligent and
1205 will always attempt to use any mounted volume if possible and reduces
1206 calls to the Director asking about volumes.
1208 kes Turn off some code when batch insert not enabled.
1209 kes Edit FD name in connect error messages.
1210 kes Rework the reservation system to take into account that the Director
1211 might give us a Volume that is different from the current one being
1212 used, and to ensure that we don't exceed Maximum Volume Jobs.
1213 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1214 fatal error with multiple jobs running'
1215 kes Add more debug code in reservation system.
1216 kes Implement maxvol-test to check bug #947.
1218 kes Add code to handle tray monitor separated from Win32 FD.
1219 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1221 kes Add missed return in fixing verify bug -- trunk only.
1222 ebl Fix a command parser issue causing a director segfault.
1223 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1224 This fixes bug #954.
1225 kes Increase the max block size to 4MB fixes bug #957.
1226 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1227 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1228 is not properly mounted (recognized) during a poll.
1229 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1230 Job that has differences reports Verify OK.
1231 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1233 ebl Add an option to operate on all pools with update vol parameters.
1234 This complete the project 20. Patch from Nigel Stepp.
1235 ebl Add history support to bconsole when using readline.
1236 Using Ctrl-D to exit doesn't update .bconsole_history
1237 kes Modify new volume algorithm to use max MediaId for generating next
1238 volume number rather than the count of Volumes. This should essentially
1239 eliminate the failure rate if some volumes were deleted. Bug #921.
1240 kes Begin implemention of Optimize Job Scheduling.
1241 kes Implement restore callback that Dirk and I agreed on for bat
1242 restore. This fixes bug #928. Restore of backup of zero files fails.
1243 kes Fix SQL Catalog logging which broke with new db_escape_string
1246 Release Version 2.2.4
1248 kes Fix bacula_cats.def for new db_escape_string().
1249 kes Increase size of name string when FD making connection to SD.
1250 May fix bug #953. FD->SD connection failure.
1252 kes Add code to help Dan debug 2drive-incremental-2disk test.
1253 kes Add code to try to fix bug #908.
1254 kes Add waits to multiple exit detection code to try to force pid
1255 file to always be deleted.
1256 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1257 This fixes bug #950.
1258 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1259 trying to switch drives by checking for blocking before unblocking.
1261 kes Cancel storage daemon in all cases where FD reports error. This
1262 should fix virtually all cases of bug #920.
1263 kes Fix db_escape_string() for MySQL which did not compile.
1265 kes Fix error message that was clobbered when Dir tells SD it does not
1266 have write permission on Volume. This should fix a minor point
1267 in bug #942, but not the main problem.
1268 kes Add code to cancel job in SD if FD connection fails. This should
1270 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1271 dvl Pass jcr and db into db_escape_string() to enable better escaping
1273 kes Fix migration code to get correct Volume name with multiple volumes
1274 by skipping |. Fixes bug #936.
1275 kes Implement patch supplied by Landon to fix bug #944 where using
1276 TLS with bconsole uses 99+% of the CPU.
1277 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1279 kes Move patches into patches directory.
1281 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1284 ebl Using 'm' in bconsole will show messages like before,
1285 and not memory usage.
1286 kes Fix bug #935, and probably also bug #903 where files were not
1287 restored. MediaId was not properly set in JobMedia record after
1290 kes Suppress chown and chmod error messages if the FD is not running
1293 kes Apply Martin Simmons' patch that should turn off the new API usage
1294 when batch insert is turned off allowing building on older
1296 kes Add ./configure search in qwt-qt4 for qwt package
1298 kes Bacula is now free of 3rd party GPL copyrighted code!
1299 kes Remove idcache.c
1300 kes Add guid_to_name.c/h which replace idcache.
1301 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1303 ebl Detect if new PosgreSQL batch insert API is present.
1304 kes Correct incorrect mempool call causing Director crash. Occurs on
1305 systems without va_copy().
1306 sb Update spec files for 2.2.1 release
1308 kes Fix memory pool call in ua_output.c. bug #934.
1309 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1310 Add test program to fnmatch.c
1312 kes Integrate patch to README.vc8 from
1313 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1314 edit it to get it into Unix patch format.
1315 kes Implement mkpath.c to replace old FSF makepath.c
1317 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1319 Release Version 2.2.1
1321 kes Update POTFILES.in
1322 kes Cleanup a few underquoted AC_DEFUNs in configure
1323 kes Apply patch from Martin Simmons that adds a test for va_copy to
1326 kes Fix bug #921 by increasing the number of tries to create a new volume
1328 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1329 can be called multiple times. Implement a version for machines
1330 without va_copy() that gets a big buffer.
1332 kes Integrate more portable zone offset code into bsmtp.c
1333 Submitted by Attila Fülöp.
1335 kes Fix bad SD->FD return status reported by
1336 (James Harper) <james.harper@bendigoit.com.au>
1337 ebl Fix a bug in read_close_session which return random status
1338 thanks to James Harper
1340 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1341 and directory names during restore of single file/directories.
1342 kes Add sanity checks to .sql command when string is empty. Hopefully
1343 that will resolve Dirks Director crash.
1345 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1346 in the bsmtp chat subroutine when debug is >= 10.
1348 kes Fix Director crash when running bat SQL queries.
1349 kes Add David's notes on Item 8: Copy pools.
1351 kes Rework projects file to be current and ready for a vote.
1352 kes Enhance lex scanner error message.
1354 kes Tweak LICENSE file to mention BSD code.
1355 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1356 if specified on the ./configure.
1357 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1358 This class is intended to allow us to open a second bsock to the
1359 Director while in the restore subdialog.
1361 kes Fix configure to create bat Makefile before creating dependencies.
1362 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1363 kes Add a tooltip to the tray monitor.
1364 dvl Set the Director's PID file before dropping privs. This fixes
1367 kes Update AUTHORs file
1368 kes Increase the default max concurrent jobs to 20 in FD and SD to
1369 correspond with the default .conf files.
1370 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1371 some different, of the same file created by RN when porting the
1373 kes Rearrange some of the Win32 directories and the placement of the files
1375 kes Set DEVELOPER flag in version.h
1377 ========================================================================
1378 Release Version 2.2.0
1380 kes Apply a second doc patch from Marc.
1381 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1382 improves the tips section that discusses how to setup multiple
1385 kes Update bat README file.
1386 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1387 corrects a typo in the Recycle status check in db_find_next_volume().
1388 This will probably fix a number of annoying problems with multiple
1390 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1391 bnet calls -- no functionality change.
1393 kes Modify the Verify output to specify if files are missing on
1394 the Volume(s) or disk. Fixes confusion in bug #916.
1395 kes When more than one Volume is read in a migration job, the last
1396 Volume bytes reported are from the last read volume rather than
1397 the last written volume. Fixed. This fixes bug #910.
1398 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1399 It previously printed New Recyle flag is: no. This fixes bug
1402 kes Correct seg fault when switching tape drives during restore.
1403 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1404 be used until after 2.2.0 release.
1406 kes Remove fnmatch() in SD that permitted wild card specifications.
1407 This fixes bug #914.
1409 kes Fix %g in filename returned by SQL for browse tree reported by
1411 kes Fix configure so that it puts config.out in the cwd rather than
1413 kes Attempt to fix the locking problem reported by Eric in bug #906.
1414 kes Make berrno class to leave errno unchanged after constructor call.
1415 kes Make bnet_server use the heap rather than the stack to allocate
1416 its socket fd pointers to avoid a crash at termination. Problem
1417 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1419 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1420 and putting it in depkgs-qt along with Qt4.3.
1422 kes Rework code in acquire.c that switches drives for reading when
1423 the Media Type does not match. This should fix bug #906
1425 ebl Fix a director segfault during job setup #907
1426 kes Correct seg fault in postgresql when first operation returns no
1427 rows. Fixes Dirks File browser problem seg fault with bat.
1429 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1430 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1433 kes Implement PopUp YES/NO dialog for bat.
1435 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1437 kes Correct RunScript to terminate job in FD on failure.
1438 kes Change abort_on_error and AbortJobOnError to fail_on_error
1439 and FailJobOnError in RunScripts.
1440 kes Minor tweaks of code formating in RunScripts, principally to
1441 avoid depassing 80 columns.
1443 kes Eliminate one #ifdef Win32 in bsmtp
1444 kes Implement grow tool to grow a file for testing very large databases.
1445 kes Add big-vol-test to test Bacula seeking with > 5GB.
1448 kes Modify find_next_volume() to return all values in Media record.
1449 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1453 kes Update Release notes
1455 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1456 Warning, in previous beta version, all media get from scratch keep their
1459 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1460 This should fix bug #842. Made a note to look at removing the temp
1461 files at the end of the install.
1462 kes Add ability to mount and unmount a file device providing it is
1463 marked as being removable and has the appropriate mount and unmount
1464 commands defined in the Device resource. This fixes bug #830.
1465 kes When applying a storage override, release all previous storage
1466 definitions rather than just prepending the new storage.
1467 This should prevent a good deal of confusion.
1469 kes Implement ./configure search for qwt libraries.
1471 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1472 Win32 FD. This should fix bug #893.
1473 kes Remove an unnecessary beep in Win32 init code.
1474 kes Update copyright dates in Win32 executable about boxes.
1475 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1476 code with a BSD getopt.c and getopt.h.
1477 kes Remove sched.h from the Win32 compat directory -- not used.
1478 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1479 need to shut it down, do it through the services panel or the command
1481 kes Remove some inappropriate Bacula FSFE copyrights.
1482 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1483 kes Fix regress config non-portable test as pointed out by
1484 Florian Heigl <florian.heigl@gmail.com>
1485 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1486 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1488 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1489 Reported by Frank Sweetser.
1493 kes Fix client-only build.
1494 kes Integrate client-only fixes for bsys (initgroups) and conio from
1495 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1496 kes Make arguments to get_scratch_volume() in same order as other
1498 kes Rework the prune_volumes() subroutine so that after purging and
1499 no volume found in desired pool, it will check for a scratch
1500 volume. This prevents recycling the whole scratch pool.
1501 kes Add code to status storage to print boffset_t (largefile support).
1503 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1504 kes You now need a --with-qwt=<dir> to be able to build bat.
1505 kes Update src/win32/cats/bacula_cats.def to include the new
1506 db_get_query_dbids() call on Win32.
1508 kes Correct a problem when selecting a scratch volume and moving
1509 it to another pool that lost some columns.
1510 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1511 kes Enhance Autochanger error messages to include Volume and device name.
1512 kes Rework prune_volumes() code to take account of InChanger flag,
1513 and to handle recycling volumes going to the Scratch pool and
1514 current pool because the RecyclePool directive.
1515 kes Implement a better and more efficient db_get_query_dbids() to
1516 handle creating and passing back a list of DBIds.
1520 kes Start work on new more efficient DBId subroutine. First use
1521 will be for recycling volume to Scratch inchanger.
1522 kes Increase number of JobIds in pruning from 1000 to 10000.
1523 This to be replaced by above routine.
1524 kes Begin implementation of building Qt4 on Win32.
1525 kes Correct typo in fix I added for bad TLS shutdown.
1526 kes Pull 2.0.3 patches into patches directory.
1527 kes Update Release notes. Include qt-console in line count.
1528 kes Update Projects file.
1530 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1531 bug in migration code where a job that spanned two volumes
1534 kes Implement new BST_DESPOOLING blocked state. Change from locking
1535 during despooling in SD to blocking. This means that other threads
1536 can work with the device structure, in particular the reservations
1537 system while despooling.
1539 kes Fix return in reservation message queue that missed clearing
1540 the jcr lock (implemented 26Jun07 below).
1541 kes Rename a number of dev methods to make locking function names
1543 kes Document locking in lock.c. Move lock structures to new file
1546 kes Move reservations message lock to lock jcr only this
1548 kes Move main SD locking code into lock.c (new file).
1549 kes Update Win32 build to include lock.c
1553 kes Dirk committed the qwt library code for drawing graphs in bat.
1554 kes Tweak install of qwt so that it is integrated with ./configure.
1556 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1557 out by Eric (my typo).
1558 ebl Fix configure.in to get batch mode enable
1559 kes Return correct string from authenticate.cpp in bat when connecting
1561 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1562 spurious line drops when using TLS.
1563 kes Do not file reparse points when restoring a file that already
1566 kes Implement Windows reparse points -- similar to directories, but
1567 we do not descend into it. This is a first cut. They seem to
1568 be backed up, but restore is not yet tested.
1569 kes Remove restore_blocking in tls code when shutting a socket to leave
1570 it in blocking mode. Hopefully this will fix the encryption bug
1571 reported by Frank Sweetser.
1572 kes When opening a file for backup, tell the OS that we are going to
1573 read it sequentially -- optimization.
1574 kes Change variable names in authenticate_director() to not conflict
1575 with member names in bat. Caused great confusion with compiler,
1578 kes Queue openssl error messages in case of comm problem.
1579 kes Do shutdown() call if socket terminated.
1580 kes Remove some duplicated code in tls.c
1581 kes Move more of the bsock member variables into private and access
1583 kes Add Frank Sweetser's tls-test to the regression suite.
1585 kes Add Swedish sv.po file
1587 kes Don't print clock skew message in FD if less than 3 seconds diff.
1588 kes Add a bit of VSS info to status client.
1589 kes Implement a first cut of Vista VSS, using Win2003 code.
1591 Release: 2.1.20 beta
1593 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1594 loaded tape but uses first drive).
1595 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1596 This was indeed a Win32 issue.
1598 kes Simplify search of autochanger for in-use Volume.
1599 kes Fix exit condition of check for in-use volume. kes Remove
1600 inappropriate my_postgresql_free_result() in db_close()
1602 kes Fix bad return in FD when encryption signature not found.
1603 Probably caused a crash.
1604 kes Inhibit missing encryption signature error messages for
1605 file types where no signature computed.
1606 kes Correct inverted check on autochanger in reservation system.
1607 kes Tweak debug code in autochanger reservation.
1609 kes Add some additional locking in the cats directory in subroutines
1610 that modify packet variables called from batch insert.
1611 kes Rework how dcrs are allocated. new_dcr() can now be called
1612 with an existing pointer, and it will simply clean it up.
1613 This allows the reservation system to test various different
1614 devices, and will permit easy device changes.
1615 kes A bunch of changes all over to handle new new_dcr() calling
1617 kes Work more on the Volume management in the SD. Remember Volumes
1618 for tape drives and for autochangers (even virtual disk changers).
1619 kes When looking at the Volume list to reserve a drive, handle
1620 autochanger names correctly by interating through the changer
1621 devices. Also call the Director to see if a Volume is suitable
1622 for the current job.
1623 kes Fix some bugs in bscan. Make sure all media records are written.
1624 Make sure that valid JobMedia records are written for disk files.
1625 Previously they were completely wrong.
1626 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1627 that the URLs don't change and so that the developers will all
1628 work off the same copy. Rebuild from scrach.
1629 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1631 Release: 2.1.18 beta
1633 kes Fix seg fault in FD from incorrect digest size.
1634 kes Fix argument to non-OpenSSL crypto.c subroutine.
1636 Release: 2.1.16 beta
1638 kes Remove a few malloc()s from the encryption code.
1639 kes Use the class calls to bsock in filed/backup.c and restore.c in
1640 place of the old bnet_xxx code.
1641 kes Implement code that does an on the fly calculation of the
1642 signing digest during restore of encrypted files. It makes
1643 a best guess at the algorithm, and if it is not correct, will
1644 then revert to the old code which reads the file after it is
1646 kes Implement at least one missing crypto stream in stream_to_ascii()
1647 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1648 #877 where a reload with bad syntax causes Dir to exit.
1650 Cut: 2.1.14 beta (not released)
1652 kes Do not free a volume on a tape drive until another volume is
1653 mounted and read, or the autochanger unloads the volume.
1654 This should help the SD re-use volumes that are already mounted,
1655 and should fix bug #886.
1656 kes Apply patch from user brettedgar that allows gnome2-console include
1657 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1658 kes Apply patch from Lucien Weller that fixes day of week calculation
1659 because of DST flag problem. Fixes bug #887.
1661 kes Move find_next_appendable_volume() to after acquiring a valid device
1662 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1664 kes Unable to reproduce bug 872. However added additional testing for
1666 kes Bug #874 resolved by documenting SQLite limitations.
1667 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1668 kes Bug #881 resolved by removing typo in mtx-changer script.
1669 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1670 approval. Added a link to the wiki on the web page, and implemented
1671 a backup from http://paramount.ind.wpi.edu
1673 kes Fix update allfrompool to pass pool name.
1675 kes Convert to pure GPL v2 license.
1676 kes Fix sscanf problems reported by Peter Buschman that caused
1677 a bus error on Solaris.
1678 kes Rework (simplify) the select prompt in bat.
1679 kes Move get_jobid_from_tid() into lib and create a
1681 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1682 should definitely fix the problem of lost error messages in the
1684 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1685 kes Eliminate tcpd.h from the project. Enclose the #include from the
1686 library with extern C ...
1687 kes Add print of signal name when a signal is trapped.
1689 Release: 2.1.12 beta
1691 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1693 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1694 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1695 makes SQLit3 run 30 times faster, though a bit less safe.
1696 kes Implement --with-batch-insert in configure and detection of thread
1697 safe libraries. It is on by default, but turned off if no thread
1698 safe library (e.g. SQLite 2) is available.
1700 kes Fix Bacula PostgreSQL buffer overruns.
1701 kes Do better checking for NULL results returned from PostgreSQL;
1702 implement retry for failed queries; clear results buffer after
1703 failed query. Hopefully this will correct the PostgreSQL failures.
1705 kes Implement algorithm to handle only one appendable volume with
1706 Prefer Mounted Volumes = no.
1707 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1708 returned from a query.
1709 kes Make volume lock recursive.
1710 kes Implement an additional volume reservation algorithm that
1711 starts by considering all reserved volumes then uses the
1712 old brute force algorithm of searching the resources to
1713 find a suitable device.
1714 kes Add new reservations debug code and refine the old code.
1715 kes Update the win32/dll/bacula.defs file.
1717 kes Tweak reservations algorithm to permit a few more cases, i.e.
1718 volume reserved, but on different drive, ...
1719 kes Enhance SD status to include Pool and Media Type for drive in a
1720 more readable format (a bit longer).
1721 kes Fix PostgreSQL double free.
1723 kes Minor refactoring of restore decryption code.
1724 kes Add code to smartall.c to detect double free of a buffer.
1726 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1727 so that bsmtp will create a correct email address (mailbox only).
1728 kes Modify 'memory' command so that the buffers are listed as 'In use'
1729 to avoid confusion with Orphaned buffers.
1730 kes I reworked the OpenSSL include/lib flags to be handled in
1731 the standard Bacula way, which should fix bug #863 concerning
1732 non-standard OpenSSL libraries.
1734 kes Implement Help Browser window for bat.
1735 kes Fix reload bug that reset StorageId to zero.
1737 kes Fix TLS #ifdefing when TLS turned off.
1738 kes Ensure that when labelling a tape with Slot=0 that InChanger
1740 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1742 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1743 add DISTINCT (required by PostgreSQL).
1744 kes Implement BSOCK authenticate_director() method. Eventually will
1745 authenicate all daemons.
1746 kes Move several more functions into the BSOCK class.
1748 kes Add code to tell the OS that we no longer need a cached
1749 file that we were reading. In findlib/bfile.c. Also,
1750 only cache files that we are reading. Thanks to
1751 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1752 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1753 kes Implement script to automatically generate cats and dll .def
1754 files for Win32 dll.
1755 kes Update README.mingw32 to include new .def file generation.
1756 kes Correct typo in UTF-8 error message as reported by:
1757 jhernandez <julianhernandez@gmail.com>
1758 kes Add additional sm_check() code on debug level 1.
1759 kes Set default debug level to 1.
1760 kes Trap SIGABRT in attempt to get traceback.
1762 kes Reduce bat connect timeout from 30 to 15 seconds.
1763 kes More restructuring and implementing BSOCK class in place of
1765 kes Remove a few unnecessary malloc() tests in crypto code.
1766 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1767 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1768 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1770 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1772 kes Fix Verify InitCatalog. The attributes were not pointing to the
1773 correct saved location.
1774 kes Implement message callback so that GUI is sure to get all
1775 daemon messages. Currently displayed in a dialog in bat.
1776 kes Ignore SIGUSR2 (Bacula timer) in bat.
1777 kes Apply regress patch from bug #859 to allow regress to work
1778 with Solaris compiler.
1780 kes Begin adding TLS support to bat.
1781 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1782 clean up lex.c and make it more readable.
1784 kes Move more bnet functions into the BSOCK class.
1785 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1786 kes Complete change of berrno strerror() method to bstrerror()
1788 Release: 2.1.10 beta
1790 kes Cleanup incorrect email addresses in bsmtp.
1791 kes Make bat display initial messages rather than discard them.
1793 kes First cut of adding .mod to the run command.
1794 kes Implement auto display of messages in bat.
1795 kes Enhanced preferences to allow all Bacula output to be
1798 kes Try to make bsmtp date routines more generic.
1799 kes Fixed bug #856 autochanger documentation.
1800 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1801 kes Add new cats entry point so Win32 builds.
1803 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1805 kes Do better checking for the MySQL 64 bit libraries looking for both
1806 .a and .so libraries.
1807 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1808 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1809 kes Require the thread safe version of MySQL during configure. Thanks
1810 to Andre Noll for pointing this out.
1811 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1812 continuing in migration code.
1813 kes Apply implementation of tray-monitor font derived from gnome-console
1814 submitted by Andreas Piesk <a.piesk@gmx.net>
1816 kes Eliminate important memory loss in SQLite
1817 kes Fixed the batch insert MySQL thread specific data that was not
1818 being freed. See cats/mysql.c:db_thread_cleanup().
1819 kes Fix restore before command.
1820 kes Convert old hdr.name to name() in a few places.
1821 kes Implement update jobid command.
1822 kes Return all time_t dates in db_get_job_record()
1823 kes Stop watchdog in SD earlier.
1824 kes Put Pool just after Storage in please mount message.
1825 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1828 kes Update the po files.
1829 kes Fix Verify InitCatalog by making it cache attributes.
1831 kes Change name bacula-bat to bat for man 1 page to correspond to
1833 kes Check for client and store NULL pointers in status command. This
1835 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1836 kes Fix sign extended editing of %p.
1837 kes Clean out a little old #ifdefing in cats/mysql.c
1839 kes If time diff between DIR and FD is more than 600 seconds convert
1840 INFO message to WARNING.
1841 kes Implement heap size display in status for all daemons.
1842 kes Attempt to fix MySQL db open memory loss (not successfull).
1843 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1844 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1845 Query. This looks like a MySQL but but by doing extra releases,
1846 the memory goes away. This should fix bug #847.
1848 kes When backup fails, cancel SD before waiting for sd termination.
1849 kes If SD is waiting for FD to connect during cancel, wake up the
1851 kes Fix fsf code so that errno is correctly reported.
1852 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1854 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1855 so that Bacula doesn't later stumble into a seg fault.
1856 kes Use the term Restore Client in the restore Job report.
1857 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1858 the original job's FileSetId.
1859 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1860 spooling in migration jobs. Not yet tested.
1861 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1862 reading conf file from a pipe. However, do it with open_bpipe()
1863 rather than popen. Not yet tested.
1865 kes Fix an ugly bug where the VolCatBytes were getting updated
1867 kes Implement bconsole memory command that prints current memory
1868 usage, plus smartalloc dump.
1869 kes Clarify some error messages in backup, admin, and migrate.
1870 kes Shrink label dialog to smaller size.
1871 kes Invert Cancel OK buttons on restore to be OK Cancel.
1872 kes More strerror() to bstrerror() conversions.
1874 kes Start implementing bstrerror() in place of strerror().
1875 kes Stripping path -- seems to work.
1877 kes Prevent door and port files from being restored (mostly
1879 kes Free an unreleased buffer in compat code.
1880 kes Change console Job name from *Console* to -Console- to eliminate
1881 Win32 filename problems. Put Win32 path separator when creating
1882 Console file. This fixes bug #846.
1883 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1885 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1887 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1888 to force Win32 error message.
1890 kes First cut strip path. The data should be passed to the FD,
1891 but nothing is done with it yet.
1892 kes Enhance the digest and signature routines in the crypto
1893 library to accept a JCR and to use it to print error messages
1894 so that they will go in the Job report rather than the daemon's
1896 kes Simplify some of the verify signature code.
1897 kes Simplify a few of the alternative returns in the signature
1900 ebl Use only POSIX regex instead of GNU regex in breg.c for
1901 File relocation. It fix broken freebsd compilation.
1902 kes Convert all other Dir files to use new ua class message
1904 kes Tentative fix for missing digest signature in bug 807.
1905 kes Correct handle problem in new win32_ftruncate routine.
1906 kes Convert ua_purge.c and ua_update.c to use new ua class
1907 message routines for bat.
1909 kes Correct incorrect installation of LICENSE in Win32 installer.
1910 kes Display LICENSE at the beginning of the Win32 install.
1911 kes Attempt to correct the need for the png files to be installed
1913 kes Reapply my bat.conf install script in qt-console. I think I
1914 editted bat.pro instead of bat.pro.in and it was lost.
1915 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1916 the /var/lock/subsys for subsysdir. Also corrects typos in the
1919 kes First cut update job.
1920 kes Correct configure to include qmake of src/qt-console directory.
1922 kes Make restore job yes/mod/no print in one command so GUI works.
1923 kes First cut implementing backup and restore client.
1924 kes Correct editing in Verify output that caused a seg fault.
1926 kes Insure that bat.conf is not overwritten during installation.
1927 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1928 while I was implementing migration in March 2006 !
1930 ebl Cleanup file relocation, using char *RegexWhere instead of
1931 char *where + bool where_use_regexp
1932 kes Update some manpages and add bat manpage.
1933 kes Make a first cut at converting bacula.spec.in for bwx-console
1935 kes Apply patch from John Goerzen to add hostname as fourth argument
1936 to make_catalog_backup script.
1937 kes Fix typos I introduced into bsmtp.c
1938 kes Make pm_strxxx() routines handle input of NULL pointer. This
1939 is to protect from NULL pointers returned from SQL databases.
1940 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1941 kes Add more debug to FIFO code -- fix fifo regression test.
1943 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1944 kes Add thread timer to bnet_connect() to break from OS if wait time
1947 kes Update Win32 build to include new files, new symbols, and
1949 kes Implement socket level heartbeat (tcp_keepidle)
1950 ebl Commit File relocation patch
1951 kes Make bat have 'make install' target.
1952 kes Warn during install if old gnome-console binary found.
1953 kes Warn during install if old wx-console binary found.
1954 kes Add -8 option to bsmtp command line to add content type utf-8.
1955 Fixes bug #809. (Character coding problem in bsmtp).
1956 kes If < is found in target (from, to, cc) then do not enclose the
1957 target in < > in bsmtp. Fixes bug #772 (malformed address).
1958 kes When printing certain items in dbcheck, stop after 300000.
1959 Fixes bug #822. (dbcheck loops).
1960 kes Incorrect status in Dir after waiting for mount with poll set.
1963 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1965 kes Print waiting to reserve a device every 5 mins.
1967 kes Don't call close_part in label.c if tape and relabel.
1968 kes Don't free volume if busy in close() -- should help with
1970 ebl Fix #824 RunScript bug (After script could be execute twice)
1971 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1972 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1973 Add a regression script to test RunScript
1975 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1978 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1979 deprecated. No additional bugs will be fixed, and they will be dropped
1980 in a future release (probably 2.4.0).
1981 kes Change name of wx-console to bwx-console to make it more Bacula
1983 kes Change the name of gnome-console to bgnome-console to make it
1986 kes Some time in March, a Feature Request with patch from Jorj Bauer
1987 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1989 The ability for the director to validate a Client (FD) CN against
1990 an arbitrary set of patterns rather than the hostname, with
1991 A new 'TLS Allowed CN' set of directives which are implemented
1992 in the Client resource. Then pattern matching is used in place
1993 of hostname matching against the Certificate's CN. As an example, we
1994 have certificates which (a) use a local CA, and (b) have a CN of the
1996 kes Add new/changed entry points to Win32 build
1997 kes Create unaccepted-projects for projects that are not accepted.
1998 kes Simplify locking in the reservations system.
1999 kes Add more debug code in reservations.
2000 kes Make sure error condition on reserving a volume is handled correctly.
2001 kes Correct handling of volume_in_use.
2002 kes Correct handling of initializing a device.
2003 kes Move handling of broadcasting releasing a device into release_device().
2004 kes Correct attaching dcr to dev so that it is only done if device
2005 is properly initiated.
2007 kes Locking debug level tweaks in SD.
2008 kes Tweak new Volume code.
2010 kes Add exec external-command [wait-seconds] to bconsole. This
2011 executes the external-command. Note! normally external-command
2012 should be enclosed in double quotes.
2013 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
2014 it should normally be off in a production system.
2016 kes Implement die command for SD so that we can force it to dump.
2017 kes Implement SD lock debug code.
2018 kes Implement new algorithm for keeping Volume list in SD. It
2019 is now owned by the device.
2021 kes Implement new code for freeing in use volumes that should
2022 resolve if not all, some of the problems of multiple drive
2023 tape conflicts described in bug 801.
2025 kes Fix gui/bacula-web/images files in svn.
2026 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
2028 ebl Fix a bug in batch mode (in string escape)
2029 kes Correct migration prune SQL typo that crept in in a
2030 recent 2.1.x change.
2032 kes Move bnet_despool() into class in bsock.c
2033 kes Modify job report to include director name and Build OS.
2034 kes Move drop root privilege and check_catalog() before fork.
2035 kes Add update database scripts (version 9 to 10) to updatedb directory.
2037 ebl Check size and age of each file after its backup to see if
2038 it has changed during backup, if 'checkfilechanges' is set.
2039 The FD will do an extra check (stat(2)) after
2040 each file backup. mtime, ctime and size are compared with
2041 'before backup' information. If time or size mismatch, an
2042 error message will be generated. You must upgrade FD to use it.
2044 kes Make database name and user configurable
2045 --with-db-name=xxx --with-db-user=xxx
2046 kes Add back database type to message.c for debugging.
2048 kes Implement dir_sql() which issues an SQL query.
2049 kes Modify bat medialist to use dir_sql() and do some minor C++
2050 formatting as well as eliminating a number of pointers, simplifing
2053 kes Fix some of the mtx-changer grep commands for tape label readers.
2054 kes Convert a number of bsendmsg into the appropriate send/warning/error
2055 message class calls.
2056 kes Suppress the using database message in the .sql command.
2057 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
2059 kes Add context menu for floating a window.
2060 kes Some minor cleanup and name changes in qt-console
2061 kes Add doing mt setblk 0 in Win32 mtx-changer.
2062 kes Apply Martin's bug fix to move definition of ENODATA for
2064 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
2065 sqlite2 and sqlite3.
2067 kes More pruning cleanup.
2068 kes Turn on wait_for_drive by default in mtx-changer.
2069 kes Turn on Batch insert code by default as it now passes regression.
2070 kes Add ./configure --enable-bat to enable building of Bat.
2071 No install yet though.
2073 kes Implement a new .sql command for bat.
2074 kes Implement code to turn off pruning in obtaining the next volume.
2075 Pruning is turned off for the status dir command, but turned on
2076 for SD requests and for the list nextvolume command.
2078 kes Correct Qmsg() that was not updated correctly when committing a
2079 previous change (probably the recent TLS patch).
2081 kes Write new subroutine is_volume_purged() that explicitly checks
2082 if the Volume is purged, and if so marks it as such. This should
2083 resolve problems reported about needing to mount twice to recycle
2085 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2086 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2087 amount of duplicated code.
2088 kes Do volume pruning only for the Media Type desired (reduces pruning time
2089 if multiple Media Types are in the same pool).
2090 kes Implement more detailed info in the Job report for the Bacula version
2092 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2094 ebl Add bbatch tool to bench database and insert mode.
2095 Fix sql quote stuff in batch mode
2096 Fix sql stuff for mysql
2098 kes Correct problems with am/pm scheduling. Fixes bug #808.
2099 kes Implement new prunning code that prunes up to 1000 jobs at
2100 the same time. The same technique can be applied to a number
2101 of other prune/purge subroutines.
2102 kes Add an insanity check when starting a new tape job to ensure
2103 that the tape position has not been changed. If so fail the
2105 kes Fix Win32 build for dlls to add the folllowing:
2106 src/lib/bsock.c -- new file with new entry points
2107 src/lib/dlist.c -- new entry points
2108 src/cats/sql_create.c -- new entry point
2109 src/cats/sql_cmds.c -- new DATA item exported
2111 ebl batch mode cleanup bscan-test is ok now.
2112 kes Implement SD code to check length of disk volume before appending.
2114 kes Correct return status on db_batch... routines.
2115 kes Add call to db_write_batch_file_records() to migration code.
2116 ebl Fix AfterJob timing
2117 kes Move the checking of the database in initializion of the Director
2118 to after we drop privileges. This avoids the need for both root
2119 and bacula access to the DB.
2120 kes Correct a misplaced variable definition in src/filed/backup.c
2121 kes Correct how the new batch insert db_create_attributes_record()
2122 uses the arguments. Caused a seg fault in bscan.
2123 kes Implement lock() and unlock() methods in DEVICE class.
2124 Implement block() and set_block(xx) methods in DEVICE class.
2125 kes Modify bnet_connect() so that it uses time() to check for the
2126 wait time expiring (on some OSes, some system calls may not
2127 return immediately).
2128 kes Modify Verify to obtain the previous JobId when it is actually
2129 running rather than at schedule time (as it was in 1.38.x).
2130 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2132 kes When checking pid in pid file, continue running if the pid is
2133 the same as ours. This occurs on IRIX after a system crash.
2136 kes Extend new GUI API.
2137 kes Make the ua structure a class, and implement send_msg(),
2138 error_msg(), warning_msg(), and info_msg().
2140 kes Apply fix from for building wx-console on the Mac from
2142 kes Implement new select mechanism for GUI programs.
2143 kes Reorganize initialization of stackedWidgets in bat.
2145 kes Add updated nagios plugin supplied by Christian Masopust.
2147 kes More bat implementation.
2148 kes File migrate bug with Pool Occupancy using mediaid instead
2149 of jobids. Fixes bug #795.
2150 kes Fix orphaned buffers in filed backup and verify due to
2151 crypto buffers not freed during errors. Fixes bug #789.
2152 kes Extend new GUI api code to tree commands.
2153 kes Ensure that tree and dot commands check console ACLs.
2154 kes Permit marking directory with trailing slash.
2155 kes Allow 20 console connections (instead of only 10).
2157 kes Add smartctl call to bacula-sd.conf as an example of getting
2160 kes Modify jobq.c to let simultaneous restore jobs run. This may
2161 cause them to fail if they cannot get a drive.
2162 kes Add Client Connect Wait to Storage daemon to permit users to
2163 modify the time the SD waits for a FD connection.
2165 kes Correct virtual changer check which was backwards. This caused
2166 volumes to be unloaded into slots already occupied.
2168 kes Apply Command ACL filter to JobId list in restore command.
2169 kes Correct typeo in var.c patch.
2171 kes Don't let Bacula prune File or Job records for the current Job.
2172 kes Fix variable substitution pad + inc bug reported (with patch)
2175 kes Correct SQLite log table index as reported by Luca Berra.
2177 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2179 kes Begin implementing new comm signals for API.
2180 kes Fix a few places in lib/message.c where the open fd may
2182 kes Continue implementing lib/bsock.c (real class). Make jcr,
2183 who, host, and port private. There are new methods to access
2184 them for non-class use. This required touching a number of files.
2186 kes Add LANG=C to autoconf/randpass so it works with languages other
2187 than English. Fixes bug #788.
2189 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2191 You will not be able to generate Include/Exclude list any more.
2192 It will be fixed soon.
2193 If you want to use this, you can apply
2194 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2196 kes Restore of sockets created false error messages because Bacula
2197 no longer restores sockets, but the code was still trying to
2198 set the attributes on a non-existent file. Reported by a user.
2199 ebl finish RecyclePool feature
2200 Media will takes Pool.RecyclePool
2201 when moving from Scratch to a Pool or when user will do
2202 update volume=xxx frompool
2203 To use it, add RecyclePool = aPool to your Pool resource
2206 RecyclePool = Scratch
2210 kes Expand new BSOCK class adding signal() and new BNET signals.
2211 kes Begin enhancing the dot commands adding a new API function
2212 that returns more information and will make it easier
2213 to interface to the Director from a program.
2215 kes Make DEVICE fd private. Its new name is m_fd, and can be
2216 obtained with dev->fd() outside the class. This is the
2217 first of many DEVICE members to be made private.
2218 kes Implement Michael Renner's idea on having a virtual disk
2219 changer. I made some minor modifications (e.g. I did not
2220 implement the Virtual Changer directive, but simply set
2221 the Changer Command to an empty string.
2223 kes Implement a BSOCK send() method that writes the whole record
2224 in a single write() request rather than in two.
2225 ebl add update volume=xxx recyclepool=yyyy
2226 volume takes recyclepool from pool when using update volume=xxx from pool
2228 kes Fix encryption deblocking bug, which caused some restored files
2229 to be truncated. This fixes bug #763.
2230 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2231 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2233 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2234 ebl Use btime_t instead of uint64_t in media patch.
2236 kes Optimize the use of the database a bit in the Status dir command.
2237 Only open it when needed, ensure that if any previous database
2238 was opened, it is closed.
2240 kes Correct VolCatBytes bug from media patch.
2241 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2242 in the case of orphaned records.
2243 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2244 and File records in 300K chunks to be more efficient. This
2245 idea came from Juan Luis Frances (if I remember right).
2246 kes Apply Eric's scratch patch that moves a purged Volume to
2247 the RecyclePool. Question: how is RecyclePool set? what
2248 happens to the ScratchPool?
2249 kes Apply Eric's media patch that collects read/write media
2250 times as well as byte counts. This patch requires a
2251 simultaneous upgrade of the DIR and SD. Note, there
2252 should be some way to turn off timing. I'm not sure
2253 times are in Bacula units.
2254 kes Apply Eric's batch-insert patch.
2256 kes Update projects list.
2258 kes Implement Include/Exclude file lists in FD as dlists using
2259 the new dlistString class. This permits efficiently having
2260 large include/exclude lists and completes project Item 25.
2261 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2262 console is authorized to cancel the job. This fixes bug
2264 kes Modify SD so that the VolCatJobs medium record is updated
2265 at the beginning of a Job rather than the end. This
2266 fixes bug #775 where exceeding MaxVolJobs caused jobs
2268 kes Added a mutex around getting and setting Volume information
2269 so that multiple simultaneous jobs will single thread.
2271 Switch to using Subversion
2272 kes Remove src/pygtk-console/ from configure
2274 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2275 plus the entrypoints.
2276 kes Apply patch supplied that corrects debug print
2277 in canceling jobs for max run time. Supplied as
2278 part of bug #621, which was previously fixed.
2280 kes Test on job_canceled() and sd_msg_thread_done inside
2281 loop starting the message thread to avoid a race condition.
2283 kes Remove rl_catch_signal from console.c as it conflicted
2284 with the header definition. Fixes bug #765.
2285 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2287 kes Clarify some stored/acquire messages to indicate if the
2288 problem is with read or append.
2290 kes Fix memory leak with storage ids in cats/sql_get.c
2291 kes Terminate watchdog earlier to avoid reference to released
2292 memory -- reported by Jason Austin.
2293 kes Move closing the database from jobq.c to the director daemon
2294 termination routine. This fixes memory leaks for shadow jobs
2295 (i.e. migration jobs).
2296 kes Free up the unique jobid chain items in migrate.c. This fixes
2297 a memory leak problem.
2298 kes Convert some ugly looking for statements to use foreach_alist
2299 in findlib/find.c. This will facilitate converting the structures
2300 to use dlist (for large include/exclude lists).
2301 kes Fix a bug in the btree.c and btree.h routines, then rename them
2302 rblist and add them to be built in src/lib. Include some new
2303 methods written by Rudolf Cejka that make the code more readable
2304 (hides some of the ugly casting).
2305 kes Add set_next() and set_prev() methods which make the code much more
2306 readable. Also add a new dlistString class that facilitates storing
2307 strings in dlists. To be used in the large include/exclude lists.
2308 kes Make some trivial modifications to lib/tree.h that use rblist
2309 rather than dlist for storing the tree links. This was suggested
2310 by Rudolf Cejka. The result of this is that the restore tree now
2311 uses red-black binary trees rather than simple linked lists. This
2312 should give rather dramatic speed improvements for directories
2313 contining large numbers of directories/files (more than 10000).
2315 kes Fix maxruntime bug #621.
2317 ebl Implement the include JobID in spool file name project.
2318 kes Reorder projects file in order determined by Jan 2007 vote.
2319 kes Implement item #12 on project list -- quick release of FD by
2321 kes Fix open of SQLite3 db where user does not have write permission
2322 so that DIR does not crash. Fixes bug #761.
2324 kes Add back missing @ in Win32 Makefile.
2325 kes Change 'Device not configured to autolabel' from INFO
2327 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2328 which should restart an indefinite # of times.
2329 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2330 other DIR specifications.
2332 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2333 Fix path quoting in SQLite scripts.
2334 Fix problems with SHGetFolderPath.
2336 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2338 kes Fix Job restart on error bug that promotes an Inc to a Full
2339 backup. This should fix bug #755.
2340 kes Add qt-console and first cut of code.
2344 kes Fix Bacula->Documentation link on Win32 to point to index.html
2345 instead of bacula.html. Fixed bug #750.
2346 kes Return JobId in db_get_job_record() when JobId==0. This should
2348 kes Do not release source pointers when restarting a failed job.
2350 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2351 This *should* fix bug #747.
2352 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2355 kes Modify USTORE constructor to set an empty store_source string,
2356 and don't copy the store_source string in a cancel. Hopefully
2357 this will fix Arno's seg fault, bug #744.
2358 kes Add back code to disable conio in configure. Fixes bug #743.
2359 kes Correct the Options scanner in the FD to correctly handle
2360 SHA1 option, which was eating the next option. Reported by
2362 kes Add code to indicate when the SD is spooling, spool wait, and
2363 despooling as requested by Alan Brown.
2365 Version 2.0.0 released: 4 January 2007