1 Technical notes on version 2.5
6 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
7 examples/database/dbcheck.sql
10 dbdriver in bacula-dir.conf
12 enhancement to wait command: wait mount ...
16 filepattern (restore with regex in bsr)
18 remove reader/writer in FOPTS????
22 kes Remove jobq.c constraint that read and write SD must be
23 different. This may lead to more deadlocks in the SD,
24 but they should be resolved there.
25 kes Ensure that job report is always printed even if job is failed
27 kes Don't print job report twice for failed VBackup jobs.
29 kes Fix editing of retention time difference to use 64 bit
30 int instead of 64 bit unsigned. This should permit very
31 long retention periods.
32 kes Implement code to prohibit a write job from appending to a
33 Volume that will be used for a read operation. This is
34 new code and could possibly cause some conflicts.
36 kes Integrate James Harper's Exchange Win32 plugin patch.
37 kes Apply patch from Marco van Wieringen that implements the new
38 Solaris libsec interface for ACLs so that Bacula can save and
39 restore both the new ACLs and old ACLs.
40 kes Marco's patch also corrects the file dependency generation code
41 so that it works properly both with shared libraries and static
43 kes Marco's patch also includes a small cleanup of the cats Makefile
44 to remove some references to non-existent files.
46 kes Modify win32 Makefiles to use full paths in most cases.
47 In particular add MAINDIR environment variable that points
48 to the main Bacula source directory.
50 kes Add read volume list code to SD -- not yet used.
51 kes Add James' binutils patch
52 kes Split volume management code out of src/stored/reserve.c into
54 kes Modify configure to do an automatic make clean. This ensures
55 that any changes to ./configure options are handled correctly.
57 Beta version 2.5.16 release:
59 ebl Rename JobStat table to JobHistory
60 kes Ensure that only normally terminated jobs are migrated.
62 kes Add Makefile dependency when using LIBTOOL_LINK so that any
63 change in ./configure options will be accounted for.
65 kes Fix typo in the ACL patch that I overlooked.
66 kes Apply Marco's libtool include patch.
68 kes Apply Bastian Friedrich's ACL patch to eliminate ACL
69 errors during restore.
70 kes Minor cleanup of create_restore_volume_list() code.
71 kes Fix typo in console Makefile.in
73 ebl Fix #1110 about RunScript that can't execute a script with
74 Unicode caracters in the path.
76 kes Apply tray-monitor patch from Bastian Friedrich to make it
79 kes Apply cleanup patch from Marco
80 kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
81 that implements libtool to create shared objects out of
83 kes Fix tray-monitor so it will speak to new FD.
84 ebl Fix bug with ansi label when volume name length < 6
85 ebl Fix segfault in debug level > 50 with btape.
86 ebl Remove warning message in btape when command is empty.
87 kes Fix Win32 build to pull in new BACULA define.
89 kes Change IncludeDir to Exclude Dir Containing.
90 kes Implement code to prohibit ExcludeDirContaining in an
91 Exclude section (same for Plugin and Options). A bit
92 of a kludge with RES_ITEM2 ...
93 ebl Add field to command list to restrict Runscript console
95 ebl Use a separate JCR when running Console command with Runscript.
96 ebl Permit to mark version as Beta in some ouputs
98 kes Add plugin types in jcr.h to reduce need to cast.
99 kes Do better checking of plugin return values.
100 kes Free plugin context after calling pluginFree() as
102 kes Allow plugin to call JobMessage with NULL context.
103 kes Do not add plugin to global list if loadPlugin returns error.
104 kes Rework plugin.h a bit to reduce dependence on Bacula.
106 kes Move generation of bsr file for Virtual Backup to run section
107 so that it is generated just before actually running.
108 Suggested by Graham Keeling.
110 kes Add malloc and free Bacula entry points for plugins. Increment
111 FD plugin interface version. Create a bacula plugin context
112 structure to keep track of whether or not the plugin is disabled.
113 kes Apply FileIndex fix for plugin name stream suggested by James.
114 kes List plugins in FD status report when debug > 0.
116 ebl Add a new VerId variable that is printed in version command.
117 kes Fix migration SQL not to migrate a job that has not terminated.
118 This is a partial fix to bug #1164.
119 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
120 backup start time bug reported by Graham Keeling.
122 ebl Fix possible bug in cancel_job() with job that are not
125 kes Fix bat build for Win32.
127 kes Copy plugin link field into ffpkt.
129 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
130 It provides FileRegex in bsr files and code to collect regex
131 from the user during restore, an Allow Mixed Priorities feature,
132 and documentation for the above.
133 ebl Remove db berkeley from configure process
134 kes Do dirty check on hostname (Linux only) and if not resolvable
135 use localhost as default.
136 kes Increase vtape max block to 20GB.
138 kes Refactor restore code to create a close_previous_stream(). This
139 This may destabilize the source.
140 kes Implement planned startRestoreFile() plugin call.
141 ebl Remove missing Loaded information from status slots storage command.
142 ebl Fix Console command problem that cancels the job
143 kes Add more plugin restore debug code.
145 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
146 kes Rewrite plugin restore interface a bit to correspond to how Bacula
147 creates and writes to the restored file.
148 kes Add some DebugMessage() calls to the bpipe-fd.c program.
150 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
151 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
152 Bat; allow add and delete in place of mark and unmark.
153 kes Another attempt to fix the endRestoreFile plugin bug noted below.
155 kes Apply dbi driver patch from Joao.
156 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
157 Bastien Friedrich reported the bug.
158 kes Create plugin instance only when FD job starts.
159 kes Add new FD plugin event: bEventCancelCommand when
160 a cancel command is issued to the FD.
162 kes Add cmd_plugin flag to jcr so we can globally know if a
163 command plugin is running.
164 kes If command plugin running, do not attempt (for the moment)
165 to get Win32 extended attributes.
166 kes Ensure that proper Win32 flags are set in bfile packet
167 if plugin_bopen() works on Win32.
168 kes Remove generated src/plugins/fd/Makefile
170 kes Implement build and install of bpipe-fd.so plugin.
171 kes Rework the interface that passes packets to the plugin
172 so that the packet is started and ended by the packet size.
173 This allows the driver to do a sanity check.
175 kes Rework the pluginIO Bacula internal code to enable
176 proper handling of Win32 error codes from GetLastError.
177 kes Apply Joao's patch to regress startover_libdbi.
179 ebl Add -B option to dbcheck to get catalog information
180 kes Fix Win32 build to include new library function.
181 kes Remove some old reader/writer code.
182 kes Implement ./configure --with-plugindir=xxx
183 ebl Fix the mysql bug in the new accurate code
184 kes Improve plugin debug. Create plugin test.
185 kes Set main thread specific data to INVALID because it
186 has no jcr. This allows debug output to work correctly.
187 kes Add src/plugins/fd/Makefile to ./configure process.
188 kes Make first cut attempt to correct SQL that computes the current
189 Pool usage. This is to fix bug #1159.
190 kes Do a bunch of plugin cleanups for Win32 and more careful checking
191 of PluginDirectory and whether or not a plugin was found.
193 kes This code should fix the race condition that leads to a Director
194 crash at job end time when the job list is updated. This was reported
196 kes Add more plugin documentation and fix include of config.h for
197 Win32 build (I hope).
199 ebl Revert to htable instead of rblist
200 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
201 tree instead of htable.
202 ebl Use a dedicate DB link to compute and send the accurate list
205 kes Fix compile errors in filed/fd_plugin.c.
207 kes Remove all double quotes from SQLite creating script and
208 replace by single quotes as suggested by John Huttley.
210 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
211 It significantly improves the performance of dbcheck for
213 kes Fix bad debug code call in src/filed/accurate.c
215 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
216 output. Perhaps we really need to implement M_SAVED.
218 kes Fix bug #1156 FD crash during processing of Accurate data.
219 kes Tweaks to htable code to improved debugging and make names
220 a bit more meaningful.
222 ebl Remove time_t from update_stats()
224 kes Modify the license of the example plugin program to allow
225 it to be used by anyone for making a Bacula plugin.
226 kes Make apply_rp_codes() in bpipe-fd.c be static.
228 kes Remove Encryption and Accurate lines in vbackup output -- not used.
229 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
230 kes Add host name to items printed during dump.
231 kes Make Check File Changes default on.
233 kes Set the default FD timeout to 3 minutes (previously 30).
234 kes Apply Bastian Friedrich's weird spelling correction patch.
236 kes Always print Verify hash differences. Rename variable to make the
237 code slightly more readable.
239 kes Correct tests for MaxFullInterval as reported by
240 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
241 kes Fix MaxDiffInterval code as well.
242 kes Enable Win32 plugin load code in lib.
243 kes Make Verify code that computes disk checksums use the same
244 algorithm as backup when dealing with sparse files.
245 kes Attempt to run VSS on any systems newer than Vista -- should
246 make it work on Windows Server 2008.
247 ebl Change the new statistic implementation. Remove the UseStatistic
248 directive and add a 'update stats [days=...]' command. You can
249 now decide when copy job records from Job table to JobStat.
250 Statistics are much more accurate with this.
252 kes Fix SQL case problem that may cause the failure of DiskToCatalog
254 kes First cut adding SD plugins.
256 kes Add Slot if it is non-zero to writing bsr file after a
258 kes Change a number of bnet_fsend() into class method calls.
259 kes Begin audit of diff of 2.4 branch to trunk code.
261 ebl Fix the mysql creation script that double-created an
262 index of the same field on the Media table.
263 Add an index to on VolumeName to the Media table for mysql.
265 kes Another try at fixing Vbackup. It looks much better this time.
266 Disable file index sanity check in FD with value stored in
267 attributes record because with Vbackup the File Index gets
268 changed, but not the attributes record.
269 Enhance some debug code.
270 Fix handling of re-indexing records that are copied in Vbackup.
272 kes Made level_to_str() know about Virtual backup.
273 kes Set correct Virtual backup write pool.
274 kes Fix compile warning in new dbcheck port code.
275 kes Fix migration code broken by previous virtual backup fix.
277 kes Fix problem of Virtual backup not writing a sequential FileIndex.
278 kes Reset Virtual backup time/date to the value from the last backup.
279 kes Ensure that storage name is passed to SD on read.
280 kes Correct a problem with Level and Virtual backup, rework how
281 bsrs are printed in debug to use standard routine.
282 kes Apply patch from Chris in bug #1133 that provides alternate db port
284 ebl Remove catalog dependency from bcopy tool.
285 ebl Modify catalog scripts to have an easier packaging integration,
286 using default variables.
287 Make difference between SQLite3 and SQLite in db_get_type()
289 kes Apply most of changes in a patch from:
290 Michael Stapelberg <michael+bacula@stapelberg.de>
291 that allow the Bacula FD to compile on IRIX 6.5.
293 kes Apply patch from Bastian Friedrich that accepts a yes on a
294 delete volume command line.
295 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
296 job when reading from one autochanger and writing to another.
297 kes Minor tweaks (copyright dates convert to use method instead of bnet).
299 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
300 drives when no tape is mounted.
302 kes Add additional info to some SD messages.
303 kes Add fix supplied by Martin Simmons for turning off EOL character
304 in new console multi-command code.
306 kes Fix a Verify InitCatalog problem where in certain cases
307 a garbage filename may be entered in the verification database. This
310 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
311 sent in by Riyas Yoosuf.
313 kes Fix seg fault in Dir during estimate command with no level value
314 given. This fixes bug #1140.
316 kes Add message to migration job when the target job is already migrated.
317 This closes bug #1129.
320 kes Raise some restore debug levels.
321 kes Replace off_t by boffset_t where ever I found it.
323 kes Define a machine dependent ioctl request type for use with
326 kes When a migration job actually runs, re-check the Job record
327 and skip if the job is already migrated. This should
328 significantly reduce the problems with bug #1129.
330 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
331 turn off glibc checks that prevent getting good dumps.
332 kes Implement console 'wait mount' command. Doesn't yet work.
333 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
334 kes Break the do_swapping into do_unload, do_swapping, and
335 do_load. It is much more logical that way.
336 kes Implement a set_dcr_from_vol subroutine in acquire.c for
337 reading volumes. This allows the dcr to be refreshed after being
338 zapped when the wrong volume is mounted.
339 This should fix bug #1126 -- During multiple tape restore, bacula
340 does not ask for physical tape change, but rereads same tape
342 kes Apply patch submitted for bug #1107 with a small modification.
343 This fixes a bug where bcopy copied too many records.
344 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
345 This fixes bug #1124.
346 kes Make the default bat restore Pool be Any. This fixes bug #1118.
348 kes Remove debug statement that crashes the SD at the end of
349 a tape during restore. Fixes bug #1125.
351 kes Implement Win32 bat changes made to Branch-2.4
353 kes Tweak separator command in console to start disabled and
354 allow defining no separator character. Also make code a
355 bit more fault tolerant.
356 kes Make btraceback write the traceback to the working directory
357 before attempting to mail it.
358 kes Add a RFC to Projects.
360 kes Attempt to implement a kludge to make Qt work with bat
362 kes Setup rstorage correctly. Virtual backups are working.
364 kes Move setting JobLevel and JobType into a method, which should
365 allow completing Virtual Backups.
366 kes Fix verify jobs to work again.
368 kes Virtual Backup tweaks -- it is close to working.
370 kes Ensure that SD tried to mount a volume not in an autochanger
371 at least once before asking for operator intervention.
372 kes Make SD aware of Virtual Backup jobs.
373 kes Add VirtualFull for bat.
374 kes Changes to get read storage correct for Virtual Backup.
376 kes Remove old code from label.c
377 kes Split display_display_info() out of write_bsr_file()
378 kes do_vbackup_init() working -- i.e. bootstrap file built.
379 kes Change Bacula trademark owner from John Walker to Kern Sibbald
380 kes First non-working cut of vbackup
381 kes Correct FD heartbeat code to use volatile variable accessed by
383 kes Zero thread id with memset if on Win32 in case it is a struct.
384 kes If cannot create JobMedia record, continue to try to write eof
385 and clean up in block.c
387 kes Add code to interface OpenSSL to new Win32 pthreads code which
388 used a structure for thread_t.
390 ebl tweak bat for win32 compilation
392 ebl Remove tokyo cabinet from the source
393 ebl Update configure/autoconf to support berkeley DB
394 ebl Add a sort to db_get_file_list() to improve bsr construction time.
396 kes Add a mtx-changer.conf file that is not overwritten during
397 an upgrade. It fully configures the mtx-changer script.
398 kes Clear in-use bit on vol when unused while swapping.
400 kes Remove sleep at end of ./bacula
401 kes Clear hash packet for hardlinked files correctly. This corrects
402 a long standing bug where hardlinked files selected individually
403 would occasionally not be restored.
405 kes Apply Eric's patch to ensure that autoprune does not return
406 a Volume not in the autochanger unless requested to do so.
407 kes Correct bat restore display of multiple drives. This fixes
409 kes Do find_a_volume() each time an unload is done. This
410 fixes the failure of maxvol2-test.
412 kes Add some SD debug code.
413 kes Do find_a_volume() each time an unload is done.
414 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
415 and adds --with-db-port to ./configure.
416 kes Use Qmsg() in job.c watchdog callback.
418 kes Release main control rwlock if ABORTing.
419 kes Make watchdog connect timeout queue messages rather than sending
420 directly to avoid lock conflicts with the real thread.
421 kes Add const char in dbd.c to avoid compiler warnings.
422 kes Fix python compiler string warning. Note, IMO the GNU C++
423 compiler guys have made a *very* bad change to their compiler.
424 They now force all strings to be 'const' unless you explicitly
425 cast them, which is extremely ugly and ruins nice code as well
426 as creates a lot of useless work.
428 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
429 mt. This fixes bug #1116.
430 kes Add const in python files to reduce compiler warnings.
431 This may have to be backed out because of later compiler
433 kes Fix failure of 2drive-concurrent-test. Always read label;
434 clear_unload() only after drive is defined in acquire_for_read().
436 kes Generally clean up the manual tape loading code. The main
437 conceptual change is that when a volume is marked to be unloaded,
438 its volume name is retained, and it is only marked as unloaded
439 when either the autoloader says it is unloaded or another tape
440 is read on that drive.
442 kes Add debug code and refactor subroutine in stored/mount.c
443 kes Fix format problem in bscan output reported in bug #1105.
444 ebl Fix get_next_volume_for_append logic with autochanger
445 - use pruned volumes if found
446 - don't reset the inchanger flag after getting a recycled volume
448 Fix recycle_oldest_purged_volume to take InChanger flag in account
450 ebl Add mmap/unmmap implementation for tokyodbm under win32
452 kes Make first step toward eliminating globals from config
453 scanning. Also should be a workaround for FORTIFY_SOURCE
454 GNU C bug -- fixes bug #1042.
456 kes Apply duplicate job tests to restarted jobs.
457 kes Copy more data when restarting a job so that run
458 overrides are kept. This should fix bug #1094.
460 kes More word alignment cleanup.
461 kes Fix bug where SD did not ask operator if the device could not
462 be opened. Reported by Eric.
464 kes Add dbuser to DIR conf file (replaces user).
465 kes Add --with-db-password to ./configure
466 kes Fix regress to handle db_password.
467 ebl Add new 'status storage slots' that list autochanger
469 ebl Update vtape driver to compile only under Linux.
470 ebl Fix a bug when restoring with a wrong mediatype.
472 kes Eliminate ints from conf files and structures to avoid
473 word alignment problems
475 kes Fix bug reported by Scott Barninger where the bacula script
476 refers to scripts in the wrong directory. Needed to meet the
477 requirements of recent FHS location changes.
478 ebl Disable vtape for FreeBSD.
480 ebl Modify disk-changer to check if slot contains something before
483 ebl Fix vtape on win32 and debian.
484 ebl Fix autoselect patch (cause segfault).
486 ebl Fix autoselect option broken for a while. Fix #1089. Need some
487 work with StorageId to be able to use a particular drive in a
490 ebl Rename vtape to vtape.
491 ebl Update vtape driver.
493 ebl Modify vtape driver to avoid sparse file.
494 kes Add make clean of qt-source directory during ./configure
495 kes Store last block number written to tape in DEVICE and
496 use it for testing for correct last block on EOT.
498 Release Version 2.4.0:
502 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
503 This fixes bug #1095.
505 kes Add create_postgresql_database.sql to Win32 installer. Should
506 fix problem reported by Juilio Monteiro.
507 kes Get correct slot when auto unloading a device. This fixes bug
510 kes Fix multiple media restore.
511 kes Make DEVICE Slot private and access it via a method.
512 Allows better control over when it is set and cleared.
513 kes Fix possible seg fault if SQL error.
515 kes Add Martin's fixes to argument scanning for the estimate
516 command. This fixes bug #1093.
517 kes Add debug code to SD.
518 kes Fix renaming a Volume, which used the wrong Volume name.
520 kes If operator has rewind tape, print warning, release tape and
521 try once more. If tape is positioned somewhere, something went
522 wrong, so mark the tape in error and try once more. Previously
523 this error was fatal, now it produces an error message.
524 kes Ensure correct volume name displayed during restore
525 kes Ensure that Volume is mounted for restore.
527 kes Fix a few more Coverity reported problems.
529 kes Apply Allan Black's status dir job count patch.
530 ebl Add information about IMPORT/EXPORT slots in mtx-script.
531 kes Enhance a couple of SD debug messages.
532 kes Tweak unload flag setting and ensure it is set during swap.
534 ebl Fix #1091 about bad output in estimate command.
536 kes Modify autochanger locking to attempt to avoid race
538 kes Make sure device not busy before doing label command.
539 kes Display open() errors except when polling. Previously too
540 many were suppressed. This should fix bug #1070.
541 kes Fix Win32 reparse points. Bacula will not recurse into any
542 reparse point directory, including mount points, unless the
543 directory is explicitly mentioned at the top level (same as
544 with Unix). A file that is linked to another file will be
545 backed up -- much as Unix does for hardlinked files.
546 This fixes bug #1041.
548 kes Remove double quotes from ChangeLog and ReleaseNotes
549 kes Remove StorageId test when pruning and recycling (Eric's changes).
550 kes Remove old form of locking when getting volumes -- causes deadlock.
551 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
552 the name unique and to eliminate compile time error.
553 kes Add accurate.o to Win32 FD Makefile
555 kes Fix cats dll build on Win32 after db_update_job_end_record
556 calling sequence change.
557 ebl Switch to tokyo dbm instead of htable in accurate code
558 ebl Include tokyo dbm to bacula source tree
560 kes Fix buffer overruns detected by Coverity.
562 kes Tweak joblog display.
564 kes Implement --without-qwt
565 kes Fix layout of restore tree dialog
566 kes Add configure bat QWT libraries, so that bat can be built
567 with or without the QWT libaries.
569 ebl Add dummy tape driver for regression tests.
570 kes Make sure we unload the right slot when swapping.
572 kes Add debug times, reduce size of two-pool-changer test
574 ebl Tweak autoconf scripts for vtape
576 kes Improve SD reserve debug code.
577 kes Testing an improvement to free up volumes no longer in use.
579 kes Rework SD acquire for read to handle autochanger Volume
581 kes Implement regression that explicitly tests swapping a Volume
582 from one drive to another.
583 kes Enhance disk-changer to detect most error conditions.
584 kes Fix SD code so that it properly swaps a Volume between drives.
585 This fixes bug #1083.
587 kes Apply libdbi patch from Joao Freitas for regress and for
588 Bacula trunk. Regress now works with libdbi. Nice.
589 kes Apply .nobackup patch from bug #1077 submitted by
591 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
592 name into jobs cloned via the run directive.
594 kes Prevent a Volume that is being swapped from being freed from
595 the volume list. This will most likely fix, at least partially,
597 kes Fix strippath so that it does not get a buffer overrun and crash FD.
598 This fixes bug #1078.
599 kes Remove 50 millisec wait in SD that broke debugger.
600 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
601 that a job may run, counted from when the job was scheduled.
602 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
603 a job may block waiting for a resource, counted from when the job starts
604 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
605 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
606 that implements multiple commands per line in the console when using
607 readline. Modify the default to use a semicolon as the command separator.
609 ebl Fix SQL query in migration code.
610 ebl Make accurate mode with hash disk pass regression tests
612 ebl Implement first cut of accurate backup with hash disk.
614 kes Force unload of volume when wrong volume mounted in SD.
616 kes Fix bat seg fault at termination.
617 kes Add Bacula generated version to bat about box.
620 kes Experiment with allowing multiple read jobs.
621 kes Move final volume swapping code to DCR method and
622 call it from acquire_for_read().
623 kes When wrong volume is mounted during read, unload_autochanger.
625 kes Integrate the libdbi changes from Joao Henrique Freitas
627 kes Stop searching for Volumes in SD askdir if DIR returns the
628 same volume name twice in a row.
629 kes Close bat console windows first to eliminate error message
632 kes Tweak the swap Volume from one drive to another code so that
633 it now seems to work.
634 kes Resolve several problems with recycling that broke the new
635 code (these problems are in 2.2.9 as well).
636 kes Remove the volume lock when calling the sysop code.
637 kes Don't mark a reserved volume with no writers as unused otherwise
640 kes Rework class structures for VOLRES, DCR, and DEVICE to make
641 the method names a bit more logical, and for more logically
642 handling the responsibilities.
644 kes Remove redundant code in terminating the scheduler that just
645 causes a seg fault in many cases.
646 kes Cleanup releasing a volume and make it a DCR method.
647 kes Improve algorithm for detecting pre-reserved volume and
650 kes Tweak volume swapping code so it works.
651 kes Correct name overloading in mount.c
652 kes Replace released flag in VOLRES with reserved and add access
653 methods for the VOLRES class.
654 kes Prevent volume from being released while being swapped.
655 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
656 plugin that add %w (where) and %r (replace flag) editing to
658 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
660 kes Refactor parts of stored/mount.c
662 ebl Add sanity checks for VolWriteTime and VolReadTime
663 ebl Take care of bad clock changes while computing VolWriteTime
664 and VolReadTime. This should fix or limit #1066
665 kes Correct error string numbers in dird/catreq.c
666 kes Restructure reserving, acquiring, and mounting volumes. Calls to
667 autochanger are deferred for mount.c -- simplifes the code.
669 kes Do not prune any running job. It just fails the job.
670 kes Lock the volumes when changing dev->reserved_device and marking
671 the volume unused otherwise the device can get reserved by
672 another job before the volume is released, thus blocking it.
674 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
675 kes Fix bug #1063, reuse of freed ptr in list nextvol.
676 kes Release regex compile buffer in filed/job.c
677 kes Add proper type of const char in sql_create.c
678 kes Turn off debug in daemon termination routines
679 kes Move free_volume_list() before devices are freed in stored.c
680 kes Fix reference to uninitalized stack variables in bregex.c.
681 This should correct bug #1067.
683 kes Fix possible seg fault in SD when freeing a volume entry.
685 kes Implement unload_dev() before swap device.
686 ebl Add statistics prunning with option and menu
687 kes Separate unload_dev() from unload_other_device() in autochanger.c
689 kes Apply patch from bug #1069 that corrects spurious error messages
690 when ACLs enabled on SGI but no ACL exists.
691 ebl Fix small segfault in bacula-sd when debug level is 500
692 kes Modify run_program() and run_program_full_output() to use
693 call by reference for the results string. This corrects a long
694 standing problem where the address of the string may be changed
695 in the subroutine but not in the calling program.
697 kes Re-enable code to remember last volume mounted on a non-tape
699 kes Add patch supplied in bug #1068 that fixes a SD crash when using
700 a Virtual autochanger.
701 kes Generate correct JobMedia records during spooling/despooling when
702 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
703 <tih@hamartun.priv.no> for excellent analysis and testing.
705 kes Tweak hash algorithm for htable using Martin Simmons idea
706 for doing a circular shift.
707 kes Remember what volume is in VTLs (previously turned off for
709 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
710 pointed out some problems in creating JobMedia records during
711 spooling with concurrent jobs. Fix the problem by updating the
712 start file position before despooling and generate a jobmedia
713 record at the end of despooling.
715 kes Fix handling of JobMedia records during spooling and when a
716 Volume is changed without actually writing data to the Volume.
718 kes Rework certain SD locking based on gdb tracebacks of deadlocks
719 sent by Eric. This code now uses only the volume_lock() rather
720 than the reservations lock when at EOM and acquiring a new
722 kes Ensure only one exit point in several subroutines.
724 kes Implement bsock code to permit locking. Use the new code in Verify
725 in the FD to prevent the heartbeat thread from disrupting the Verify
726 data sent to the Dir.
727 kes Modify SD locking to eliminate locking the reservations system from
728 outside the system. Use the volume lock when getting media data
729 and reserving a new volume at end of media.
730 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
731 when SD starts are not locked into place.
733 kes Fix error compiling runscript code on 64 bit machines.
734 kes Tweak Win32 mount point code.
735 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
736 cleared giving bad file estimate).
737 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
740 kes Keep Schedule run lists in order as suggested by
743 kes Implement autostart scripts for Debian.
744 ebl Implement upgrade catalog scripts.
746 ebl Apply jobstat patch for long term statistics. Have to implement
747 purge stats command and upgrade scripts.
748 kes Fix mtx-changer.in for broken Debian mt program.
750 kes Fix large number of JobMedia records reported by Eric Bollengier.
752 kes Apply doc fix from bug #1062.
753 kes Resolve crash and improper restore wx-console Win32 restore
754 GUI. Fixes bug #1065.
755 kes Update Win32 wxWidgets to latest version.
756 kes Attempt to do correct handling of Win32 mount points. Should
758 kes Fix Win32 FD backup/restore memory leak due to improper termination
759 of BackupRead/Write. This fixes bug# 1038.
761 ebl Reduce memory usage for accurate backup, working only with ctime
762 and mtime. (not all Lstat field)
763 About 40MB for my Linux system (400.000 files)
765 kes Add dcr->reserved_volume flag that allows us to release a volume
766 even if it is not vol->released. This allows maxvol2 to work when
767 Volumes expire and we are already writing to the device (i.e. a
768 volume is pulled out from under us by another job terminating after
769 we reserve the drive).
771 ebl Permit multiple command/console per runscript definition.
772 RunScript { command = /bin/true ; command = /bin/false ... }
773 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
774 (restart an application) just after the VSS snapshot on windows.
775 kes Don't zap dcr values during release_volume() as they might
776 have the next Volume to be mounted.
777 kes Fix AIX prototype.
779 kes Second cut of drive switching during backup.
782 kes Update Win32 version of wxWidgets to most recent version.
783 kes Tweak Copy job details.
784 kes Rework dir_find_next_appendable_volume to make a bit more effort
785 to find a suitable volume before giving up.
787 kes Make ask_sysop_to_create... to return if waken from wait.
788 This helps get out of blocked conditions.
789 kes Experimental implementation of switch_device in reservations.
790 kes Implement FD version to allow easier protocol changes.
791 kes Add Plugin Options string -- not yet passed to FD.
792 kes Implement PluginOptions ACL.
794 kes Attempt to correct problems with restores with autochangers and
795 use counts going negative
796 kes Rework SD status command and implement API for bat. Implements
797 header, runing waitreservation, devices, volumes, spooling,
798 and terminated status keywords.
799 .status storage=xxx <keyword>
800 kes Clarify TLS error message by adding double quotes around name.
801 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
802 kes Pass jcr to tls routines so debug messages can be handled better.
803 kes Rework jobq resource allocation code, and possibly fix a bug
804 that caused reference counts to get out of sync.
806 kes Rename fd/dir plugin to use Bacula standard underscore.
807 kes Plugin work -- bring dir up to fd level.
808 kes Start implementation of VTL code
809 kes Fix Win32 build after adding new cats subroutine.
811 kes First cut at Duplicate Job implementation.
813 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
814 kes Start PluginOptions string, and refactor a bit of ua_run.c
815 ebl Apply Allan patch that permit to reset recyclepool.
817 kes Test patch -- possible fix or improvement for bug #1053
818 kes Refactor FD and SD status commands to permit new API code in
819 SD, and to fix Win32 build.
820 kes Win32 build is now working.
822 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
823 some ideas in patch from Scott Bailey.
824 kes Begin implementation of duplicate Job control.
825 kes Fix some of Win32 build after recent additions.
826 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
827 which causes the FD to detect whether or not the OS has the
828 honor no dump bit (*BSD systems), and if so, to skip backing up
829 any file with this bit set. The feature is enabled by setting
830 'honor no dump flag = yes' in the Options section of a FileSet.
832 kes Correct po warning message with datarootdir
833 kes Implement more code in dird.c to put configuration parsing in
834 a class rather than use globals.
835 kes Restructure SD status command for implementation of bat API
838 kes Suppress incorrect 'Will not descend from x into y' messages.
839 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
840 daemon globals used by parser.
841 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
843 kes Fix free of plugin_list when none exists.
845 ebl Apply accurate project patch.
847 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
848 on non-mempool object)
849 kes First cut of converting FD .status to work with bat API.
851 .status client=XXX header
852 .status client=XXX running
853 .status client=XXX terminated
854 kes Implement first cut of Copy Job.
855 kes Implement Catalog in Pool resource. It overrides catalog specified
856 in the Client resource.
858 kes Apply patch (with some difficulties) from Joao Henrique Freitas
859 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
861 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
862 ftruncate() actually works. In the case of some (cheap) NAS devices,
863 it does not, and so recycling NAS Volumes does not work. The code
864 simply unlink()s the file, then recreates it. This fixes bug #1011.
866 kes First incomplete cut of big malloc blocks for htable.
867 kes Tweak plugin code.
869 kes Plugin debug code + tweak a couple bat dialog layouts
871 kes Fix creating first JobMedia record during Migration to include
872 proper index. This caused slow restores of migrated jobs.
873 kes Temp fix to plugin name file_index.
874 kes Bacula backed up and restored a MySQL database.
876 kes Implement plugin restore.
877 kes Implement parsing of db_driver to give db_type index.
879 kes First cut of plugin restore code.
880 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
881 and do not strip paths on symbolic links.
882 kes Set catalog backup database and user name from values specified on
883 the ./configure line.
884 ebl Fix #1031 about wrong pool source information in job report.
887 kes Remove a redundant jcr argument to find_files, match_files, and
889 kes Implement '.status dir header|scheduled|running|terminated' that
890 prints the requested status section. With the exception of the
891 header, the other reports have fields separated by tabs (\t).
893 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
894 a resource embedded run command to find a since time if no explicit
895 since time was supplied on the command line.
896 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
897 that updates the state file at job termination time in addition to
898 when the daemon terminates.
900 kes First version where a plugin did a backup.
901 bpipe-fd.so created a backup file, wrote a test
902 string to it, and Bacua could restore this fabricated file.
904 kes Implement DB Driver = string for the DBI driver.
905 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
906 kes First cut of code for loading Win32 plugin dlls. Implement
907 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
908 and implement a dlfcn.h file based on opengroup's definitions of
911 kes First cut plugin directives.
913 kes Apply patch from bug #1049 to prevent stripping the path on a
915 kes Attempt to fix bug #1047 where stripping a path corrupts the
916 heap. Waiting for feedback.
917 kes Correct the Mount message not to suggest labeling a new tape
918 when doing a restore. Submitted by email by John Stoffel.
919 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
920 FD by using casting. Reported in bug #1042.
922 kes A bit of crypto cleanup. More later.
924 Release Version 2.2.8
926 kes Apply patch from Martin to correct bug #1040, bscan sets existing
928 kes Fixed important spelling error in doc -- bug #1045.
930 ebl Fix bextract to be able to extract non-portable Win32 data to
932 kes Move initialization of read/write res lock earlier in the code.
933 This fixes the crash with a null conf file. This fixes bug
935 kes Redefine CURES in lib/parse_conf to be URES and move it all
936 into lib/parse_conf.c -- this responds to bug #1042, but does
937 not fix it. The fix is not to compile with FORTIFY_SOURCE.
938 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
939 the trunk SVN. I don't think this was reported as a bug.
941 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
943 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
945 kes Add DataDespooling and DataCommitting status (committing is
946 the last despooling).
947 kes Finish implementation of new reservations code noted below.
949 kes Fix bsnprintf for float point numbers. I broke recently when
950 parameterizing some variables. This fixes bug #1036.
951 kes Undo recent reservations changes ... will apply them later
952 when they work better.
954 ebl Fixes #1034 which cause mysql to hang the connection after 8h
955 ebl Change default statistics target of filename.name and path.path
956 fields for PostgreSQL. This speeds lookup by indexes. Thanks
958 kes A few more tweaks to new reservation code. Make sure to clear
959 vol released flag when retaking volume. When reading label and
960 label is bad mark volume unused. When recycling, mark volume
961 unused so it can be renamed.
963 kes Fix reserve_volume() so it doesn't release a volume in use
964 (i.e. a volume entry not marked released). This should be
965 the last part needed to fix bug #1018.
967 kes Move Heartbeat documentation from Job to Director resource.
968 This fixes bug #1033.
970 kes Fix existing switch drive SD code to call autochanger to release
971 any old volume. This must be done to keep the autochanger from
972 releasing subsequently newly reserved volumes in doing a close().
973 This should fix bug #1018.
974 kes Fail if attempting to get console input in batch mode. This
975 should help fail RunScript console commands that are incomplete.
976 kes First cut implementing switch_drive() in SD (not actually called).
978 kes Implement first cut running console commands in a RunScript.
980 ebl Fixes bug #1028 where 'Selection Type' option was not usable
982 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
985 Release Version 2.2.7
987 kes Add new free_tls() entry point so that Win32 builds.
988 kes Fix compile warning in src/lib/util.c
989 kes Fix entry point for edit_job_codes() so that Win32 builds.
990 kes Fix seg fault Frank Sweetser reports in regression testing
991 on his systems. The problem was that the original author of
992 bsnprintf.c did not take into account the side effects of
993 using ++x in the argument to a #define.
994 kes Make SD protocol backward compatible with version 2.2.x.
996 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
997 because Bacula no longer restores sockets.
998 ebl Always use ignorecase fileset option on win32 FD.
1000 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
1001 that implements double quoting include names in conf files,
1002 and also allows piping input by having the first character
1003 be a vertical bar (|).
1004 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
1005 that implement %f in RunScripts to pass the FileSet name.
1006 kes Skip leading | when lex input comes from a pipe as suggested
1007 by Michael Stapelberg <michael@stapelberg.de>.
1009 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
1010 Nerijus Baliunas <nerijus@users.sourceforge.net>
1012 kes Implement Plugin Directory and plugin events.
1014 kes Implement a security enhancement: TLS authentication but no
1015 encryption. Enabled by setting 'TLS Authentication = yes'.
1016 Note when this is on, TLS encryption is turned OFF!
1018 kes This patch corrects a problem where the maximum concurrent storage
1019 jobs counter gets out of sync during restore jobs causing jobs to
1020 'wait on max Storage jobs'. This patch fixes bug #1009.
1022 kes This patch fixes bcopy so that it produces correct Volumes.
1024 kes This patch eliminates spurious output to the console during a VerifyVolume
1025 job that contains encrypted data. It fixes bug #1024.
1027 kes This patch prevents the 'status dir' command from trying to use a scratch
1028 volume and possibly moving it from one pool to another. This patch fixes
1031 kes Add new include to postgresql.c suggested by Marc Cousins so
1032 that it compiles correctly with pgre version 8.3.
1034 kes Fix --archivedir addition to configure. Replace it with
1035 --with-archivedir in configure.in This fixes the regression
1037 kes This patch fixes bug #1012 where the job is canceled because
1038 of Max Run Time exceeded when the job has not yet started.
1040 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
1041 one 'part' to write. Instead of each part being stored on disk,
1042 written to DVD, then deleted from disk, all parts are written to disk,
1043 and only the last is written and deleted from disk.
1044 kes This patch fixes the status command to include the formating string for
1045 JS_AttrInsterting. It fixes bug #1021.
1046 kes This patch should fix the Mac OS X build problem on the latest
1047 Darwin, where sys/types.h was not included correctly (apparently
1048 due to a change in the Mac headers). The solution was to explicitly
1049 ensure that it is defined for the ./configure.
1050 This patch also has a rebuild of configure that includes the Debian
1051 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
1052 kes This patch should ensure that queued messages to the console are
1053 displayed as soon as possible. It should fix bug 1007, but has been
1054 reported not to work.
1056 kes This patch fixes the infinite loop when trying to increase the
1057 maximum number of volumes in a Pool during the add command.
1058 This patch fixes bug #1008.
1060 Release Version 2.2.6
1062 db Remove extra data on estimate command in joblist for bat.
1064 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1065 really change anything, but is the beginning of doing it *right*.
1066 To do it completely right the LastWritten date must be passed to
1067 the SD, but it is not yet done.
1068 kes Minor tweaks to some bat restore SQL.
1069 kes This patch fixes bug #1003 where putting the message output from
1070 a Verify job into the catalog results in a recursive loop. The problem
1071 seems to show up only with postgresql (to be verified).
1072 kes Correct %x to %p in postgresql debug statement.
1074 kes Fix bug #942 where lots of emails where generated when the heartbeat
1075 interval was low and Bacula wanted a different tape from the one in
1078 ebl Add new SD despooling attributes and Dir inserting attributes
1079 job status codes in the catalog (Status table).
1081 ebl Use qmake-qt4 instead of qmake when available (debian system).
1083 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1084 that passing the password via the command line (arg 3) is insecure.
1085 This responds to bug #990 (it doesn't fix it).
1087 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1088 kes Fix a crash in bat when it cannot connect to the Director for example
1089 if the Director is not running.
1090 kes Remove redundant INDEX (JobId) from File table in the trunk.
1091 This fixes bug #992.
1092 kes Make explicit exception to GPL in LICENSE to permit linking
1093 the Win32 FD with Microsoft VSS code.
1094 kes Apply the Solaris package patch from
1095 Masopust, Christian <christian.masopust@siemens.com>
1096 kes Apply the patch to optionally add a timestamp in the debug output
1097 submitted by Mariusz Czulada <manieq@wp.eu>.
1099 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1100 backend (sql_strerror). Fixes bug #989
1102 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1103 It applied with no problems.
1104 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1105 awk are on the path.
1106 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1107 since the status is returned on stderr on Solaris.
1108 kes Activate Close button on tray-monitor window. This fixes
1110 kes Check for NULL item in parse_conf.c before calling it. In the
1111 case of Device, there is no item and this caused a seg fault when
1112 Device appears in the conf file.
1113 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1114 avoids pulling in config.h multiple times in some new code.
1116 kes Fix spurious warning message printed when creating a volume with
1117 a LabelFormat. This fixes bug #976.
1119 Release Version 2.2.5
1121 kes Add JobId in place of Job name in all the Jmsg() output.
1122 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1124 kes Make maxvol-test and new more strict maxvol2-test work.
1125 kes Print JobId in all Jmsg() job output.
1127 kes Add new SD despooling attributes and Dir inserting attributes
1128 job status codes. This fixes bug 961.
1129 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1131 kes Fix doc issue. This fixes bug #963.
1132 kes Fix listing performance problems in bat. Pointed out by
1134 kes Remove old debug code.
1135 kes Fix bat code that tests for Win32. This should fix bug #968
1136 kes Query 5 list wrong Vol after migration. This fixes bug #960
1138 ebl Fix #969 where user can't change Replace option in restore menu.
1140 kes Save jcr in thread specific data (tsd) for each thread.
1141 kes Make Dmsg() print JobId as -%u.
1142 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1143 for the thread if it exists.
1144 kes Remove old reservation debug jid code.
1145 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1146 ebl Add an option that permit to specify spool size in job
1147 definition. (Applying patches/testing/spoolsize_per_job.patch).
1148 You must upgrade SD and DIR at the same time.
1149 dvl Add new configuration item --archivedir
1150 dvl Adjust regression tests to use tmp not /tmp. This will allow
1151 multiple concurrent runs of the regression tests.
1153 kes Fix race condition that drops final block written to volume.
1154 This happens in rare cases with multiple simultaneous jobs
1155 when the Volume fills. This fixes bug #964. May be related
1156 to bug #935 and possibly #903.
1157 kes Eliminate more strerror() and replace with bstrerror().
1158 kes Remove BSD getopt and replace with unrestricted IBM version.
1159 kes Fix Win32 build for changed calling sequences.
1160 kes More tweaks to the mount volume routines to get everything
1161 right. Changed variable name from find to have_vol, which is
1162 much easier to understand.
1163 kes Enhance btimer debug code.
1165 kes Fix FD->SD authorization failure, which was due to spurious
1166 wakeups from a pthread_cond_timedwait(). Simply check the
1167 predicate before continuing. This fixes bug #953.
1168 kes Add const char where needed (more to do). Remove temp debug code.
1170 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1171 kes Don't overwrite error message in check_tables_version.
1173 kes Unlock batch insert tables with same calls used elsewhere.
1174 kes Allow starting 59 jobs a second.
1175 kes Make SD session key more random.
1176 kes Add retry for SQLite opening db if it fails. Probably helps
1178 kes Suppress extra error messages during batch insert failure.
1180 kes Add jcr to timer packets so if killed message can be sent to job.
1181 kes Add JobId to all Dmsg() output.
1182 kes Put some FD auth code on dbglvl rather than fixed.
1183 kes Return insert attributes error message in db msg buffer to avoid
1184 false error messages. Helps fix bug #966.
1185 kes Separate batch init error messages. Probably helps fix bug #966.
1186 kes Make SD code that contructs attribute insert check string lengths
1188 kes If Dir gets an error during inserting attributes, cancel SD.
1189 This reduces unnecessary error messages.
1191 kes Correct search boolean for getting Volume info
1192 ebl Cleanup batch insert code. Probably fixes bug #965.
1193 kes Back out one small change to the reservation system (reserving a volume).
1194 kes Rework how a Volume is mounted. It is now much more intelligent and
1195 will always attempt to use any mounted volume if possible and reduces
1196 calls to the Director asking about volumes.
1198 kes Turn off some code when batch insert not enabled.
1199 kes Edit FD name in connect error messages.
1200 kes Rework the reservation system to take into account that the Director
1201 might give us a Volume that is different from the current one being
1202 used, and to ensure that we don't exceed Maximum Volume Jobs.
1203 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1204 fatal error with multiple jobs running'
1205 kes Add more debug code in reservation system.
1206 kes Implement maxvol-test to check bug #947.
1208 kes Add code to handle tray monitor separated from Win32 FD.
1209 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1211 kes Add missed return in fixing verify bug -- trunk only.
1212 ebl Fix a command parser issue causing a director segfault.
1213 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1214 This fixes bug #954.
1215 kes Increase the max block size to 4MB fixes bug #957.
1216 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1217 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1218 is not properly mounted (recognized) during a poll.
1219 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1220 Job that has differences reports Verify OK.
1221 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1223 ebl Add an option to operate on all pools with update vol parameters.
1224 This complete the project 20. Patch from Nigel Stepp.
1225 ebl Add history support to bconsole when using readline.
1226 Using Ctrl-D to exit doesn't update .bconsole_history
1227 kes Modify new volume algorithm to use max MediaId for generating next
1228 volume number rather than the count of Volumes. This should essentially
1229 eliminate the failure rate if some volumes were deleted. Bug #921.
1230 kes Begin implemention of Optimize Job Scheduling.
1231 kes Implement restore callback that Dirk and I agreed on for bat
1232 restore. This fixes bug #928. Restore of backup of zero files fails.
1233 kes Fix SQL Catalog logging which broke with new db_escape_string
1236 Release Version 2.2.4
1238 kes Fix bacula_cats.def for new db_escape_string().
1239 kes Increase size of name string when FD making connection to SD.
1240 May fix bug #953. FD->SD connection failure.
1242 kes Add code to help Dan debug 2drive-incremental-2disk test.
1243 kes Add code to try to fix bug #908.
1244 kes Add waits to multiple exit detection code to try to force pid
1245 file to always be deleted.
1246 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1247 This fixes bug #950.
1248 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1249 trying to switch drives by checking for blocking before unblocking.
1251 kes Cancel storage daemon in all cases where FD reports error. This
1252 should fix virtually all cases of bug #920.
1253 kes Fix db_escape_string() for MySQL which did not compile.
1255 kes Fix error message that was clobbered when Dir tells SD it does not
1256 have write permission on Volume. This should fix a minor point
1257 in bug #942, but not the main problem.
1258 kes Add code to cancel job in SD if FD connection fails. This should
1260 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1261 dvl Pass jcr and db into db_escape_string() to enable better escaping
1263 kes Fix migration code to get correct Volume name with multiple volumes
1264 by skipping |. Fixes bug #936.
1265 kes Implement patch supplied by Landon to fix bug #944 where using
1266 TLS with bconsole uses 99+% of the CPU.
1267 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1269 kes Move patches into patches directory.
1271 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1274 ebl Using 'm' in bconsole will show messages like before,
1275 and not memory usage.
1276 kes Fix bug #935, and probably also bug #903 where files were not
1277 restored. MediaId was not properly set in JobMedia record after
1280 kes Suppress chown and chmod error messages if the FD is not running
1283 kes Apply Martin Simmons' patch that should turn off the new API usage
1284 when batch insert is turned off allowing building on older
1286 kes Add ./configure search in qwt-qt4 for qwt package
1288 kes Bacula is now free of 3rd party GPL copyrighted code!
1289 kes Remove idcache.c
1290 kes Add guid_to_name.c/h which replace idcache.
1291 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1293 ebl Detect if new PosgreSQL batch insert API is present.
1294 kes Correct incorrect mempool call causing Director crash. Occurs on
1295 systems without va_copy().
1296 sb Update spec files for 2.2.1 release
1298 kes Fix memory pool call in ua_output.c. bug #934.
1299 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1300 Add test program to fnmatch.c
1302 kes Integrate patch to README.vc8 from
1303 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1304 edit it to get it into Unix patch format.
1305 kes Implement mkpath.c to replace old FSF makepath.c
1307 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1309 Release Version 2.2.1
1311 kes Update POTFILES.in
1312 kes Cleanup a few underquoted AC_DEFUNs in configure
1313 kes Apply patch from Martin Simmons that adds a test for va_copy to
1316 kes Fix bug #921 by increasing the number of tries to create a new volume
1318 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1319 can be called multiple times. Implement a version for machines
1320 without va_copy() that gets a big buffer.
1322 kes Integrate more portable zone offset code into bsmtp.c
1323 Submitted by Attila Fülöp.
1325 kes Fix bad SD->FD return status reported by
1326 (James Harper) <james.harper@bendigoit.com.au>
1327 ebl Fix a bug in read_close_session which return random status
1328 thanks to James Harper
1330 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1331 and directory names during restore of single file/directories.
1332 kes Add sanity checks to .sql command when string is empty. Hopefully
1333 that will resolve Dirks Director crash.
1335 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1336 in the bsmtp chat subroutine when debug is >= 10.
1338 kes Fix Director crash when running bat SQL queries.
1339 kes Add David's notes on Item 8: Copy pools.
1341 kes Rework projects file to be current and ready for a vote.
1342 kes Enhance lex scanner error message.
1344 kes Tweak LICENSE file to mention BSD code.
1345 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1346 if specified on the ./configure.
1347 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1348 This class is intended to allow us to open a second bsock to the
1349 Director while in the restore subdialog.
1351 kes Fix configure to create bat Makefile before creating dependencies.
1352 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1353 kes Add a tooltip to the tray monitor.
1354 dvl Set the Director's PID file before dropping privs. This fixes
1357 kes Update AUTHORs file
1358 kes Increase the default max concurrent jobs to 20 in FD and SD to
1359 correspond with the default .conf files.
1360 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1361 some different, of the same file created by RN when porting the
1363 kes Rearrange some of the Win32 directories and the placement of the files
1365 kes Set DEVELOPER flag in version.h
1367 ========================================================================
1368 Release Version 2.2.0
1370 kes Apply a second doc patch from Marc.
1371 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1372 improves the tips section that discusses how to setup multiple
1375 kes Update bat README file.
1376 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1377 corrects a typo in the Recycle status check in db_find_next_volume().
1378 This will probably fix a number of annoying problems with multiple
1380 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1381 bnet calls -- no functionality change.
1383 kes Modify the Verify output to specify if files are missing on
1384 the Volume(s) or disk. Fixes confusion in bug #916.
1385 kes When more than one Volume is read in a migration job, the last
1386 Volume bytes reported are from the last read volume rather than
1387 the last written volume. Fixed. This fixes bug #910.
1388 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1389 It previously printed New Recyle flag is: no. This fixes bug
1392 kes Correct seg fault when switching tape drives during restore.
1393 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1394 be used until after 2.2.0 release.
1396 kes Remove fnmatch() in SD that permitted wild card specifications.
1397 This fixes bug #914.
1399 kes Fix %g in filename returned by SQL for browse tree reported by
1401 kes Fix configure so that it puts config.out in the cwd rather than
1403 kes Attempt to fix the locking problem reported by Eric in bug #906.
1404 kes Make berrno class to leave errno unchanged after constructor call.
1405 kes Make bnet_server use the heap rather than the stack to allocate
1406 its socket fd pointers to avoid a crash at termination. Problem
1407 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1409 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1410 and putting it in depkgs-qt along with Qt4.3.
1412 kes Rework code in acquire.c that switches drives for reading when
1413 the Media Type does not match. This should fix bug #906
1415 ebl Fix a director segfault during job setup #907
1416 kes Correct seg fault in postgresql when first operation returns no
1417 rows. Fixes Dirks File browser problem seg fault with bat.
1419 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1420 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1423 kes Implement PopUp YES/NO dialog for bat.
1425 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1427 kes Correct RunScript to terminate job in FD on failure.
1428 kes Change abort_on_error and AbortJobOnError to fail_on_error
1429 and FailJobOnError in RunScripts.
1430 kes Minor tweaks of code formating in RunScripts, principally to
1431 avoid depassing 80 columns.
1433 kes Eliminate one #ifdef Win32 in bsmtp
1434 kes Implement grow tool to grow a file for testing very large databases.
1435 kes Add big-vol-test to test Bacula seeking with > 5GB.
1438 kes Modify find_next_volume() to return all values in Media record.
1439 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1443 kes Update Release notes
1445 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1446 Warning, in previous beta version, all media get from scratch keep their
1449 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1450 This should fix bug #842. Made a note to look at removing the temp
1451 files at the end of the install.
1452 kes Add ability to mount and unmount a file device providing it is
1453 marked as being removable and has the appropriate mount and unmount
1454 commands defined in the Device resource. This fixes bug #830.
1455 kes When applying a storage override, release all previous storage
1456 definitions rather than just prepending the new storage.
1457 This should prevent a good deal of confusion.
1459 kes Implement ./configure search for qwt libraries.
1461 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1462 Win32 FD. This should fix bug #893.
1463 kes Remove an unnecessary beep in Win32 init code.
1464 kes Update copyright dates in Win32 executable about boxes.
1465 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1466 code with a BSD getopt.c and getopt.h.
1467 kes Remove sched.h from the Win32 compat directory -- not used.
1468 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1469 need to shut it down, do it through the services panel or the command
1471 kes Remove some inappropriate Bacula FSFE copyrights.
1472 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1473 kes Fix regress config non-portable test as pointed out by
1474 Florian Heigl <florian.heigl@gmail.com>
1475 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1476 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1478 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1479 Reported by Frank Sweetser.
1483 kes Fix client-only build.
1484 kes Integrate client-only fixes for bsys (initgroups) and conio from
1485 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1486 kes Make arguments to get_scratch_volume() in same order as other
1488 kes Rework the prune_volumes() subroutine so that after purging and
1489 no volume found in desired pool, it will check for a scratch
1490 volume. This prevents recycling the whole scratch pool.
1491 kes Add code to status storage to print boffset_t (largefile support).
1493 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1494 kes You now need a --with-qwt=<dir> to be able to build bat.
1495 kes Update src/win32/cats/bacula_cats.def to include the new
1496 db_get_query_dbids() call on Win32.
1498 kes Correct a problem when selecting a scratch volume and moving
1499 it to another pool that lost some columns.
1500 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1501 kes Enhance Autochanger error messages to include Volume and device name.
1502 kes Rework prune_volumes() code to take account of InChanger flag,
1503 and to handle recycling volumes going to the Scratch pool and
1504 current pool because the RecyclePool directive.
1505 kes Implement a better and more efficient db_get_query_dbids() to
1506 handle creating and passing back a list of DBIds.
1510 kes Start work on new more efficient DBId subroutine. First use
1511 will be for recycling volume to Scratch inchanger.
1512 kes Increase number of JobIds in pruning from 1000 to 10000.
1513 This to be replaced by above routine.
1514 kes Begin implementation of building Qt4 on Win32.
1515 kes Correct typo in fix I added for bad TLS shutdown.
1516 kes Pull 2.0.3 patches into patches directory.
1517 kes Update Release notes. Include qt-console in line count.
1518 kes Update Projects file.
1520 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1521 bug in migration code where a job that spanned two volumes
1524 kes Implement new BST_DESPOOLING blocked state. Change from locking
1525 during despooling in SD to blocking. This means that other threads
1526 can work with the device structure, in particular the reservations
1527 system while despooling.
1529 kes Fix return in reservation message queue that missed clearing
1530 the jcr lock (implemented 26Jun07 below).
1531 kes Rename a number of dev methods to make locking function names
1533 kes Document locking in lock.c. Move lock structures to new file
1536 kes Move reservations message lock to lock jcr only this
1538 kes Move main SD locking code into lock.c (new file).
1539 kes Update Win32 build to include lock.c
1543 kes Dirk committed the qwt library code for drawing graphs in bat.
1544 kes Tweak install of qwt so that it is integrated with ./configure.
1546 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1547 out by Eric (my typo).
1548 ebl Fix configure.in to get batch mode enable
1549 kes Return correct string from authenticate.cpp in bat when connecting
1551 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1552 spurious line drops when using TLS.
1553 kes Do not file reparse points when restoring a file that already
1556 kes Implement Windows reparse points -- similar to directories, but
1557 we do not descend into it. This is a first cut. They seem to
1558 be backed up, but restore is not yet tested.
1559 kes Remove restore_blocking in tls code when shutting a socket to leave
1560 it in blocking mode. Hopefully this will fix the encryption bug
1561 reported by Frank Sweetser.
1562 kes When opening a file for backup, tell the OS that we are going to
1563 read it sequentially -- optimization.
1564 kes Change variable names in authenticate_director() to not conflict
1565 with member names in bat. Caused great confusion with compiler,
1568 kes Queue openssl error messages in case of comm problem.
1569 kes Do shutdown() call if socket terminated.
1570 kes Remove some duplicated code in tls.c
1571 kes Move more of the bsock member variables into private and access
1573 kes Add Frank Sweetser's tls-test to the regression suite.
1575 kes Add Swedish sv.po file
1577 kes Don't print clock skew message in FD if less than 3 seconds diff.
1578 kes Add a bit of VSS info to status client.
1579 kes Implement a first cut of Vista VSS, using Win2003 code.
1581 Release: 2.1.20 beta
1583 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1584 loaded tape but uses first drive).
1585 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1586 This was indeed a Win32 issue.
1588 kes Simplify search of autochanger for in-use Volume.
1589 kes Fix exit condition of check for in-use volume. kes Remove
1590 inappropriate my_postgresql_free_result() in db_close()
1592 kes Fix bad return in FD when encryption signature not found.
1593 Probably caused a crash.
1594 kes Inhibit missing encryption signature error messages for
1595 file types where no signature computed.
1596 kes Correct inverted check on autochanger in reservation system.
1597 kes Tweak debug code in autochanger reservation.
1599 kes Add some additional locking in the cats directory in subroutines
1600 that modify packet variables called from batch insert.
1601 kes Rework how dcrs are allocated. new_dcr() can now be called
1602 with an existing pointer, and it will simply clean it up.
1603 This allows the reservation system to test various different
1604 devices, and will permit easy device changes.
1605 kes A bunch of changes all over to handle new new_dcr() calling
1607 kes Work more on the Volume management in the SD. Remember Volumes
1608 for tape drives and for autochangers (even virtual disk changers).
1609 kes When looking at the Volume list to reserve a drive, handle
1610 autochanger names correctly by interating through the changer
1611 devices. Also call the Director to see if a Volume is suitable
1612 for the current job.
1613 kes Fix some bugs in bscan. Make sure all media records are written.
1614 Make sure that valid JobMedia records are written for disk files.
1615 Previously they were completely wrong.
1616 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1617 that the URLs don't change and so that the developers will all
1618 work off the same copy. Rebuild from scrach.
1619 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1621 Release: 2.1.18 beta
1623 kes Fix seg fault in FD from incorrect digest size.
1624 kes Fix argument to non-OpenSSL crypto.c subroutine.
1626 Release: 2.1.16 beta
1628 kes Remove a few malloc()s from the encryption code.
1629 kes Use the class calls to bsock in filed/backup.c and restore.c in
1630 place of the old bnet_xxx code.
1631 kes Implement code that does an on the fly calculation of the
1632 signing digest during restore of encrypted files. It makes
1633 a best guess at the algorithm, and if it is not correct, will
1634 then revert to the old code which reads the file after it is
1636 kes Implement at least one missing crypto stream in stream_to_ascii()
1637 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1638 #877 where a reload with bad syntax causes Dir to exit.
1640 Cut: 2.1.14 beta (not released)
1642 kes Do not free a volume on a tape drive until another volume is
1643 mounted and read, or the autochanger unloads the volume.
1644 This should help the SD re-use volumes that are already mounted,
1645 and should fix bug #886.
1646 kes Apply patch from user brettedgar that allows gnome2-console include
1647 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1648 kes Apply patch from Lucien Weller that fixes day of week calculation
1649 because of DST flag problem. Fixes bug #887.
1651 kes Move find_next_appendable_volume() to after acquiring a valid device
1652 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1654 kes Unable to reproduce bug 872. However added additional testing for
1656 kes Bug #874 resolved by documenting SQLite limitations.
1657 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1658 kes Bug #881 resolved by removing typo in mtx-changer script.
1659 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1660 approval. Added a link to the wiki on the web page, and implemented
1661 a backup from http://paramount.ind.wpi.edu
1663 kes Fix update allfrompool to pass pool name.
1665 kes Convert to pure GPL v2 license.
1666 kes Fix sscanf problems reported by Peter Buschman that caused
1667 a bus error on Solaris.
1668 kes Rework (simplify) the select prompt in bat.
1669 kes Move get_jobid_from_tid() into lib and create a
1671 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1672 should definitely fix the problem of lost error messages in the
1674 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1675 kes Eliminate tcpd.h from the project. Enclose the #include from the
1676 library with extern C ...
1677 kes Add print of signal name when a signal is trapped.
1679 Release: 2.1.12 beta
1681 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1683 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1684 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1685 makes SQLit3 run 30 times faster, though a bit less safe.
1686 kes Implement --with-batch-insert in configure and detection of thread
1687 safe libraries. It is on by default, but turned off if no thread
1688 safe library (e.g. SQLite 2) is available.
1690 kes Fix Bacula PostgreSQL buffer overruns.
1691 kes Do better checking for NULL results returned from PostgreSQL;
1692 implement retry for failed queries; clear results buffer after
1693 failed query. Hopefully this will correct the PostgreSQL failures.
1695 kes Implement algorithm to handle only one appendable volume with
1696 Prefer Mounted Volumes = no.
1697 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1698 returned from a query.
1699 kes Make volume lock recursive.
1700 kes Implement an additional volume reservation algorithm that
1701 starts by considering all reserved volumes then uses the
1702 old brute force algorithm of searching the resources to
1703 find a suitable device.
1704 kes Add new reservations debug code and refine the old code.
1705 kes Update the win32/dll/bacula.defs file.
1707 kes Tweak reservations algorithm to permit a few more cases, i.e.
1708 volume reserved, but on different drive, ...
1709 kes Enhance SD status to include Pool and Media Type for drive in a
1710 more readable format (a bit longer).
1711 kes Fix PostgreSQL double free.
1713 kes Minor refactoring of restore decryption code.
1714 kes Add code to smartall.c to detect double free of a buffer.
1716 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1717 so that bsmtp will create a correct email address (mailbox only).
1718 kes Modify 'memory' command so that the buffers are listed as 'In use'
1719 to avoid confusion with Orphaned buffers.
1720 kes I reworked the OpenSSL include/lib flags to be handled in
1721 the standard Bacula way, which should fix bug #863 concerning
1722 non-standard OpenSSL libraries.
1724 kes Implement Help Browser window for bat.
1725 kes Fix reload bug that reset StorageId to zero.
1727 kes Fix TLS #ifdefing when TLS turned off.
1728 kes Ensure that when labelling a tape with Slot=0 that InChanger
1730 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1732 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1733 add DISTINCT (required by PostgreSQL).
1734 kes Implement BSOCK authenticate_director() method. Eventually will
1735 authenicate all daemons.
1736 kes Move several more functions into the BSOCK class.
1738 kes Add code to tell the OS that we no longer need a cached
1739 file that we were reading. In findlib/bfile.c. Also,
1740 only cache files that we are reading. Thanks to
1741 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1742 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1743 kes Implement script to automatically generate cats and dll .def
1744 files for Win32 dll.
1745 kes Update README.mingw32 to include new .def file generation.
1746 kes Correct typo in UTF-8 error message as reported by:
1747 jhernandez <julianhernandez@gmail.com>
1748 kes Add additional sm_check() code on debug level 1.
1749 kes Set default debug level to 1.
1750 kes Trap SIGABRT in attempt to get traceback.
1752 kes Reduce bat connect timeout from 30 to 15 seconds.
1753 kes More restructuring and implementing BSOCK class in place of
1755 kes Remove a few unnecessary malloc() tests in crypto code.
1756 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1757 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1758 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1760 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1762 kes Fix Verify InitCatalog. The attributes were not pointing to the
1763 correct saved location.
1764 kes Implement message callback so that GUI is sure to get all
1765 daemon messages. Currently displayed in a dialog in bat.
1766 kes Ignore SIGUSR2 (Bacula timer) in bat.
1767 kes Apply regress patch from bug #859 to allow regress to work
1768 with Solaris compiler.
1770 kes Begin adding TLS support to bat.
1771 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1772 clean up lex.c and make it more readable.
1774 kes Move more bnet functions into the BSOCK class.
1775 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1776 kes Complete change of berrno strerror() method to bstrerror()
1778 Release: 2.1.10 beta
1780 kes Cleanup incorrect email addresses in bsmtp.
1781 kes Make bat display initial messages rather than discard them.
1783 kes First cut of adding .mod to the run command.
1784 kes Implement auto display of messages in bat.
1785 kes Enhanced preferences to allow all Bacula output to be
1788 kes Try to make bsmtp date routines more generic.
1789 kes Fixed bug #856 autochanger documentation.
1790 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1791 kes Add new cats entry point so Win32 builds.
1793 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1795 kes Do better checking for the MySQL 64 bit libraries looking for both
1796 .a and .so libraries.
1797 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1798 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1799 kes Require the thread safe version of MySQL during configure. Thanks
1800 to Andre Noll for pointing this out.
1801 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1802 continuing in migration code.
1803 kes Apply implementation of tray-monitor font derived from gnome-console
1804 submitted by Andreas Piesk <a.piesk@gmx.net>
1806 kes Eliminate important memory loss in SQLite
1807 kes Fixed the batch insert MySQL thread specific data that was not
1808 being freed. See cats/mysql.c:db_thread_cleanup().
1809 kes Fix restore before command.
1810 kes Convert old hdr.name to name() in a few places.
1811 kes Implement update jobid command.
1812 kes Return all time_t dates in db_get_job_record()
1813 kes Stop watchdog in SD earlier.
1814 kes Put Pool just after Storage in please mount message.
1815 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1818 kes Update the po files.
1819 kes Fix Verify InitCatalog by making it cache attributes.
1821 kes Change name bacula-bat to bat for man 1 page to correspond to
1823 kes Check for client and store NULL pointers in status command. This
1825 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1826 kes Fix sign extended editing of %p.
1827 kes Clean out a little old #ifdefing in cats/mysql.c
1829 kes If time diff between DIR and FD is more than 600 seconds convert
1830 INFO message to WARNING.
1831 kes Implement heap size display in status for all daemons.
1832 kes Attempt to fix MySQL db open memory loss (not successfull).
1833 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1834 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1835 Query. This looks like a MySQL but but by doing extra releases,
1836 the memory goes away. This should fix bug #847.
1838 kes When backup fails, cancel SD before waiting for sd termination.
1839 kes If SD is waiting for FD to connect during cancel, wake up the
1841 kes Fix fsf code so that errno is correctly reported.
1842 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1844 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1845 so that Bacula doesn't later stumble into a seg fault.
1846 kes Use the term Restore Client in the restore Job report.
1847 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1848 the original job's FileSetId.
1849 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1850 spooling in migration jobs. Not yet tested.
1851 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1852 reading conf file from a pipe. However, do it with open_bpipe()
1853 rather than popen. Not yet tested.
1855 kes Fix an ugly bug where the VolCatBytes were getting updated
1857 kes Implement bconsole memory command that prints current memory
1858 usage, plus smartalloc dump.
1859 kes Clarify some error messages in backup, admin, and migrate.
1860 kes Shrink label dialog to smaller size.
1861 kes Invert Cancel OK buttons on restore to be OK Cancel.
1862 kes More strerror() to bstrerror() conversions.
1864 kes Start implementing bstrerror() in place of strerror().
1865 kes Stripping path -- seems to work.
1867 kes Prevent door and port files from being restored (mostly
1869 kes Free an unreleased buffer in compat code.
1870 kes Change console Job name from *Console* to -Console- to eliminate
1871 Win32 filename problems. Put Win32 path separator when creating
1872 Console file. This fixes bug #846.
1873 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1875 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1877 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1878 to force Win32 error message.
1880 kes First cut strip path. The data should be passed to the FD,
1881 but nothing is done with it yet.
1882 kes Enhance the digest and signature routines in the crypto
1883 library to accept a JCR and to use it to print error messages
1884 so that they will go in the Job report rather than the daemon's
1886 kes Simplify some of the verify signature code.
1887 kes Simplify a few of the alternative returns in the signature
1890 ebl Use only POSIX regex instead of GNU regex in breg.c for
1891 File relocation. It fix broken freebsd compilation.
1892 kes Convert all other Dir files to use new ua class message
1894 kes Tentative fix for missing digest signature in bug 807.
1895 kes Correct handle problem in new win32_ftruncate routine.
1896 kes Convert ua_purge.c and ua_update.c to use new ua class
1897 message routines for bat.
1899 kes Correct incorrect installation of LICENSE in Win32 installer.
1900 kes Display LICENSE at the beginning of the Win32 install.
1901 kes Attempt to correct the need for the png files to be installed
1903 kes Reapply my bat.conf install script in qt-console. I think I
1904 editted bat.pro instead of bat.pro.in and it was lost.
1905 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1906 the /var/lock/subsys for subsysdir. Also corrects typos in the
1909 kes First cut update job.
1910 kes Correct configure to include qmake of src/qt-console directory.
1912 kes Make restore job yes/mod/no print in one command so GUI works.
1913 kes First cut implementing backup and restore client.
1914 kes Correct editing in Verify output that caused a seg fault.
1916 kes Insure that bat.conf is not overwritten during installation.
1917 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1918 while I was implementing migration in March 2006 !
1920 ebl Cleanup file relocation, using char *RegexWhere instead of
1921 char *where + bool where_use_regexp
1922 kes Update some manpages and add bat manpage.
1923 kes Make a first cut at converting bacula.spec.in for bwx-console
1925 kes Apply patch from John Goerzen to add hostname as fourth argument
1926 to make_catalog_backup script.
1927 kes Fix typos I introduced into bsmtp.c
1928 kes Make pm_strxxx() routines handle input of NULL pointer. This
1929 is to protect from NULL pointers returned from SQL databases.
1930 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1931 kes Add more debug to FIFO code -- fix fifo regression test.
1933 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1934 kes Add thread timer to bnet_connect() to break from OS if wait time
1937 kes Update Win32 build to include new files, new symbols, and
1939 kes Implement socket level heartbeat (tcp_keepidle)
1940 ebl Commit File relocation patch
1941 kes Make bat have 'make install' target.
1942 kes Warn during install if old gnome-console binary found.
1943 kes Warn during install if old wx-console binary found.
1944 kes Add -8 option to bsmtp command line to add content type utf-8.
1945 Fixes bug #809. (Character coding problem in bsmtp).
1946 kes If < is found in target (from, to, cc) then do not enclose the
1947 target in < > in bsmtp. Fixes bug #772 (malformed address).
1948 kes When printing certain items in dbcheck, stop after 300000.
1949 Fixes bug #822. (dbcheck loops).
1950 kes Incorrect status in Dir after waiting for mount with poll set.
1953 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1955 kes Print waiting to reserve a device every 5 mins.
1957 kes Don't call close_part in label.c if tape and relabel.
1958 kes Don't free volume if busy in close() -- should help with
1960 ebl Fix #824 RunScript bug (After script could be execute twice)
1961 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1962 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1963 Add a regression script to test RunScript
1965 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1968 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1969 deprecated. No additional bugs will be fixed, and they will be dropped
1970 in a future release (probably 2.4.0).
1971 kes Change name of wx-console to bwx-console to make it more Bacula
1973 kes Change the name of gnome-console to bgnome-console to make it
1976 kes Some time in March, a Feature Request with patch from Jorj Bauer
1977 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1979 The ability for the director to validate a Client (FD) CN against
1980 an arbitrary set of patterns rather than the hostname, with
1981 A new 'TLS Allowed CN' set of directives which are implemented
1982 in the Client resource. Then pattern matching is used in place
1983 of hostname matching against the Certificate's CN. As an example, we
1984 have certificates which (a) use a local CA, and (b) have a CN of the
1986 kes Add new/changed entry points to Win32 build
1987 kes Create unaccepted-projects for projects that are not accepted.
1988 kes Simplify locking in the reservations system.
1989 kes Add more debug code in reservations.
1990 kes Make sure error condition on reserving a volume is handled correctly.
1991 kes Correct handling of volume_in_use.
1992 kes Correct handling of initializing a device.
1993 kes Move handling of broadcasting releasing a device into release_device().
1994 kes Correct attaching dcr to dev so that it is only done if device
1995 is properly initiated.
1997 kes Locking debug level tweaks in SD.
1998 kes Tweak new Volume code.
2000 kes Add exec external-command [wait-seconds] to bconsole. This
2001 executes the external-command. Note! normally external-command
2002 should be enclosed in double quotes.
2003 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
2004 it should normally be off in a production system.
2006 kes Implement die command for SD so that we can force it to dump.
2007 kes Implement SD lock debug code.
2008 kes Implement new algorithm for keeping Volume list in SD. It
2009 is now owned by the device.
2011 kes Implement new code for freeing in use volumes that should
2012 resolve if not all, some of the problems of multiple drive
2013 tape conflicts described in bug 801.
2015 kes Fix gui/bacula-web/images files in svn.
2016 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
2018 ebl Fix a bug in batch mode (in string escape)
2019 kes Correct migration prune SQL typo that crept in in a
2020 recent 2.1.x change.
2022 kes Move bnet_despool() into class in bsock.c
2023 kes Modify job report to include director name and Build OS.
2024 kes Move drop root privilege and check_catalog() before fork.
2025 kes Add update database scripts (version 9 to 10) to updatedb directory.
2027 ebl Check size and age of each file after its backup to see if
2028 it has changed during backup, if 'checkfilechanges' is set.
2029 The FD will do an extra check (stat(2)) after
2030 each file backup. mtime, ctime and size are compared with
2031 'before backup' information. If time or size mismatch, an
2032 error message will be generated. You must upgrade FD to use it.
2034 kes Make database name and user configurable
2035 --with-db-name=xxx --with-db-user=xxx
2036 kes Add back database type to message.c for debugging.
2038 kes Implement dir_sql() which issues an SQL query.
2039 kes Modify bat medialist to use dir_sql() and do some minor C++
2040 formatting as well as eliminating a number of pointers, simplifing
2043 kes Fix some of the mtx-changer grep commands for tape label readers.
2044 kes Convert a number of bsendmsg into the appropriate send/warning/error
2045 message class calls.
2046 kes Suppress the using database message in the .sql command.
2047 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
2049 kes Add context menu for floating a window.
2050 kes Some minor cleanup and name changes in qt-console
2051 kes Add doing mt setblk 0 in Win32 mtx-changer.
2052 kes Apply Martin's bug fix to move definition of ENODATA for
2054 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
2055 sqlite2 and sqlite3.
2057 kes More pruning cleanup.
2058 kes Turn on wait_for_drive by default in mtx-changer.
2059 kes Turn on Batch insert code by default as it now passes regression.
2060 kes Add ./configure --enable-bat to enable building of Bat.
2061 No install yet though.
2063 kes Implement a new .sql command for bat.
2064 kes Implement code to turn off pruning in obtaining the next volume.
2065 Pruning is turned off for the status dir command, but turned on
2066 for SD requests and for the list nextvolume command.
2068 kes Correct Qmsg() that was not updated correctly when committing a
2069 previous change (probably the recent TLS patch).
2071 kes Write new subroutine is_volume_purged() that explicitly checks
2072 if the Volume is purged, and if so marks it as such. This should
2073 resolve problems reported about needing to mount twice to recycle
2075 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2076 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2077 amount of duplicated code.
2078 kes Do volume pruning only for the Media Type desired (reduces pruning time
2079 if multiple Media Types are in the same pool).
2080 kes Implement more detailed info in the Job report for the Bacula version
2082 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2084 ebl Add bbatch tool to bench database and insert mode.
2085 Fix sql quote stuff in batch mode
2086 Fix sql stuff for mysql
2088 kes Correct problems with am/pm scheduling. Fixes bug #808.
2089 kes Implement new prunning code that prunes up to 1000 jobs at
2090 the same time. The same technique can be applied to a number
2091 of other prune/purge subroutines.
2092 kes Add an insanity check when starting a new tape job to ensure
2093 that the tape position has not been changed. If so fail the
2095 kes Fix Win32 build for dlls to add the folllowing:
2096 src/lib/bsock.c -- new file with new entry points
2097 src/lib/dlist.c -- new entry points
2098 src/cats/sql_create.c -- new entry point
2099 src/cats/sql_cmds.c -- new DATA item exported
2101 ebl batch mode cleanup bscan-test is ok now.
2102 kes Implement SD code to check length of disk volume before appending.
2104 kes Correct return status on db_batch... routines.
2105 kes Add call to db_write_batch_file_records() to migration code.
2106 ebl Fix AfterJob timing
2107 kes Move the checking of the database in initializion of the Director
2108 to after we drop privileges. This avoids the need for both root
2109 and bacula access to the DB.
2110 kes Correct a misplaced variable definition in src/filed/backup.c
2111 kes Correct how the new batch insert db_create_attributes_record()
2112 uses the arguments. Caused a seg fault in bscan.
2113 kes Implement lock() and unlock() methods in DEVICE class.
2114 Implement block() and set_block(xx) methods in DEVICE class.
2115 kes Modify bnet_connect() so that it uses time() to check for the
2116 wait time expiring (on some OSes, some system calls may not
2117 return immediately).
2118 kes Modify Verify to obtain the previous JobId when it is actually
2119 running rather than at schedule time (as it was in 1.38.x).
2120 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2122 kes When checking pid in pid file, continue running if the pid is
2123 the same as ours. This occurs on IRIX after a system crash.
2126 kes Extend new GUI API.
2127 kes Make the ua structure a class, and implement send_msg(),
2128 error_msg(), warning_msg(), and info_msg().
2130 kes Apply fix from for building wx-console on the Mac from
2132 kes Implement new select mechanism for GUI programs.
2133 kes Reorganize initialization of stackedWidgets in bat.
2135 kes Add updated nagios plugin supplied by Christian Masopust.
2137 kes More bat implementation.
2138 kes File migrate bug with Pool Occupancy using mediaid instead
2139 of jobids. Fixes bug #795.
2140 kes Fix orphaned buffers in filed backup and verify due to
2141 crypto buffers not freed during errors. Fixes bug #789.
2142 kes Extend new GUI api code to tree commands.
2143 kes Ensure that tree and dot commands check console ACLs.
2144 kes Permit marking directory with trailing slash.
2145 kes Allow 20 console connections (instead of only 10).
2147 kes Add smartctl call to bacula-sd.conf as an example of getting
2150 kes Modify jobq.c to let simultaneous restore jobs run. This may
2151 cause them to fail if they cannot get a drive.
2152 kes Add Client Connect Wait to Storage daemon to permit users to
2153 modify the time the SD waits for a FD connection.
2155 kes Correct virtual changer check which was backwards. This caused
2156 volumes to be unloaded into slots already occupied.
2158 kes Apply Command ACL filter to JobId list in restore command.
2159 kes Correct typeo in var.c patch.
2161 kes Don't let Bacula prune File or Job records for the current Job.
2162 kes Fix variable substitution pad + inc bug reported (with patch)
2165 kes Correct SQLite log table index as reported by Luca Berra.
2167 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2169 kes Begin implementing new comm signals for API.
2170 kes Fix a few places in lib/message.c where the open fd may
2172 kes Continue implementing lib/bsock.c (real class). Make jcr,
2173 who, host, and port private. There are new methods to access
2174 them for non-class use. This required touching a number of files.
2176 kes Add LANG=C to autoconf/randpass so it works with languages other
2177 than English. Fixes bug #788.
2179 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2181 You will not be able to generate Include/Exclude list any more.
2182 It will be fixed soon.
2183 If you want to use this, you can apply
2184 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2186 kes Restore of sockets created false error messages because Bacula
2187 no longer restores sockets, but the code was still trying to
2188 set the attributes on a non-existent file. Reported by a user.
2189 ebl finish RecyclePool feature
2190 Media will takes Pool.RecyclePool
2191 when moving from Scratch to a Pool or when user will do
2192 update volume=xxx frompool
2193 To use it, add RecyclePool = aPool to your Pool resource
2196 RecyclePool = Scratch
2200 kes Expand new BSOCK class adding signal() and new BNET signals.
2201 kes Begin enhancing the dot commands adding a new API function
2202 that returns more information and will make it easier
2203 to interface to the Director from a program.
2205 kes Make DEVICE fd private. Its new name is m_fd, and can be
2206 obtained with dev->fd() outside the class. This is the
2207 first of many DEVICE members to be made private.
2208 kes Implement Michael Renner's idea on having a virtual disk
2209 changer. I made some minor modifications (e.g. I did not
2210 implement the Virtual Changer directive, but simply set
2211 the Changer Command to an empty string.
2213 kes Implement a BSOCK send() method that writes the whole record
2214 in a single write() request rather than in two.
2215 ebl add update volume=xxx recyclepool=yyyy
2216 volume takes recyclepool from pool when using update volume=xxx from pool
2218 kes Fix encryption deblocking bug, which caused some restored files
2219 to be truncated. This fixes bug #763.
2220 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2221 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2223 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2224 ebl Use btime_t instead of uint64_t in media patch.
2226 kes Optimize the use of the database a bit in the Status dir command.
2227 Only open it when needed, ensure that if any previous database
2228 was opened, it is closed.
2230 kes Correct VolCatBytes bug from media patch.
2231 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2232 in the case of orphaned records.
2233 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2234 and File records in 300K chunks to be more efficient. This
2235 idea came from Juan Luis Frances (if I remember right).
2236 kes Apply Eric's scratch patch that moves a purged Volume to
2237 the RecyclePool. Question: how is RecyclePool set? what
2238 happens to the ScratchPool?
2239 kes Apply Eric's media patch that collects read/write media
2240 times as well as byte counts. This patch requires a
2241 simultaneous upgrade of the DIR and SD. Note, there
2242 should be some way to turn off timing. I'm not sure
2243 times are in Bacula units.
2244 kes Apply Eric's batch-insert patch.
2246 kes Update projects list.
2248 kes Implement Include/Exclude file lists in FD as dlists using
2249 the new dlistString class. This permits efficiently having
2250 large include/exclude lists and completes project Item 25.
2251 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2252 console is authorized to cancel the job. This fixes bug
2254 kes Modify SD so that the VolCatJobs medium record is updated
2255 at the beginning of a Job rather than the end. This
2256 fixes bug #775 where exceeding MaxVolJobs caused jobs
2258 kes Added a mutex around getting and setting Volume information
2259 so that multiple simultaneous jobs will single thread.
2261 Switch to using Subversion
2262 kes Remove src/pygtk-console/ from configure
2264 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2265 plus the entrypoints.
2266 kes Apply patch supplied that corrects debug print
2267 in canceling jobs for max run time. Supplied as
2268 part of bug #621, which was previously fixed.
2270 kes Test on job_canceled() and sd_msg_thread_done inside
2271 loop starting the message thread to avoid a race condition.
2273 kes Remove rl_catch_signal from console.c as it conflicted
2274 with the header definition. Fixes bug #765.
2275 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2277 kes Clarify some stored/acquire messages to indicate if the
2278 problem is with read or append.
2280 kes Fix memory leak with storage ids in cats/sql_get.c
2281 kes Terminate watchdog earlier to avoid reference to released
2282 memory -- reported by Jason Austin.
2283 kes Move closing the database from jobq.c to the director daemon
2284 termination routine. This fixes memory leaks for shadow jobs
2285 (i.e. migration jobs).
2286 kes Free up the unique jobid chain items in migrate.c. This fixes
2287 a memory leak problem.
2288 kes Convert some ugly looking for statements to use foreach_alist
2289 in findlib/find.c. This will facilitate converting the structures
2290 to use dlist (for large include/exclude lists).
2291 kes Fix a bug in the btree.c and btree.h routines, then rename them
2292 rblist and add them to be built in src/lib. Include some new
2293 methods written by Rudolf Cejka that make the code more readable
2294 (hides some of the ugly casting).
2295 kes Add set_next() and set_prev() methods which make the code much more
2296 readable. Also add a new dlistString class that facilitates storing
2297 strings in dlists. To be used in the large include/exclude lists.
2298 kes Make some trivial modifications to lib/tree.h that use rblist
2299 rather than dlist for storing the tree links. This was suggested
2300 by Rudolf Cejka. The result of this is that the restore tree now
2301 uses red-black binary trees rather than simple linked lists. This
2302 should give rather dramatic speed improvements for directories
2303 contining large numbers of directories/files (more than 10000).
2305 kes Fix maxruntime bug #621.
2307 ebl Implement the include JobID in spool file name project.
2308 kes Reorder projects file in order determined by Jan 2007 vote.
2309 kes Implement item #12 on project list -- quick release of FD by
2311 kes Fix open of SQLite3 db where user does not have write permission
2312 so that DIR does not crash. Fixes bug #761.
2314 kes Add back missing @ in Win32 Makefile.
2315 kes Change 'Device not configured to autolabel' from INFO
2317 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2318 which should restart an indefinite # of times.
2319 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2320 other DIR specifications.
2322 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2323 Fix path quoting in SQLite scripts.
2324 Fix problems with SHGetFolderPath.
2326 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2328 kes Fix Job restart on error bug that promotes an Inc to a Full
2329 backup. This should fix bug #755.
2330 kes Add qt-console and first cut of code.
2334 kes Fix Bacula->Documentation link on Win32 to point to index.html
2335 instead of bacula.html. Fixed bug #750.
2336 kes Return JobId in db_get_job_record() when JobId==0. This should
2338 kes Do not release source pointers when restarting a failed job.
2340 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2341 This *should* fix bug #747.
2342 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2345 kes Modify USTORE constructor to set an empty store_source string,
2346 and don't copy the store_source string in a cancel. Hopefully
2347 this will fix Arno's seg fault, bug #744.
2348 kes Add back code to disable conio in configure. Fixes bug #743.
2349 kes Correct the Options scanner in the FD to correctly handle
2350 SHA1 option, which was eating the next option. Reported by
2352 kes Add code to indicate when the SD is spooling, spool wait, and
2353 despooling as requested by Alan Brown.
2355 Version 2.0.0 released: 4 January 2007