1 Technical notes on version 2.5
5 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
6 examples/database/dbcheck.sql
7 enhancement to wait command: wait mount ...
9 filepattern (restore with regex in bsr)
14 ebl Apply Bastian's patch that add spooldata=yes|no option
17 ebl Fix bash shell to sh shell in database creation script
19 kes Fix orphaned jobs (possible deadlock) while pruning.
20 kes Use jcr stored in bsock rather than searching in getmsg.c.
21 This results in about a 5% speed improvement with four
23 kes Implement win32_chmod that uses wide characters, if possible,
24 to get and set the file attributes.
26 kes Apply pane freezing during updates patch from Riccardo Ghetta.
27 kes Rework next_vol and autoprune a bit due to failure in
28 recycle-test. prune_volumes() now returns no status,
29 but should prune at least one Volume, if possible.
30 kes Modify check_if_volume_valid_or_recyclable to reject a
31 volume with Recycle set off.
32 kes Modify prune_volumes() to continue if volume Recycle is off
33 or if the volume has expired. Add more debug.
35 kes Fix bug #1046 VolumeToCatalog incorrectly reports mounted
36 filesystems as missing on the Volume.
37 kes Rewrite the set_jcr_job_status() code to include job status
38 priorities so that more important status changes occur but
39 lower priority status changes will not overwrite something
40 more serious. This could possibly cause reporting incorrect status
41 reporting in some cases. More testing is needed to ensure
42 I have the right priorities. This vastly simplifies the previous
44 Verify Diff status should now be correctly reported, whereas it
46 kes Reduce some debug output.
47 kes Apply Joao's patch to SQLite tables to make chars work.
49 ebl Fix #1175 About update slots that don't reset InChanger flag when
51 ebl Fix #1173 where prune_volume() returns a volume from the scratch.
53 kes Remove jobq.c constraint that read and write SD must be
54 different. This may lead to more deadlocks in the SD,
55 but they should be resolved there.
56 kes Ensure that job report is always printed even if job is failed
58 kes Don't print job report twice for failed VBackup jobs.
60 kes Fix editing of retention time difference to use 64 bit
61 int instead of 64 bit unsigned. This should permit very
62 long retention periods.
63 kes Implement code to prohibit a write job from appending to a
64 Volume that will be used for a read operation. This is
65 new code and could possibly cause some conflicts.
67 kes Integrate James Harper's Exchange Win32 plugin patch.
68 kes Apply patch from Marco van Wieringen that implements the new
69 Solaris libsec interface for ACLs so that Bacula can save and
70 restore both the new ACLs and old ACLs.
71 kes Marco's patch also corrects the file dependency generation code
72 so that it works properly both with shared libraries and static
74 kes Marco's patch also includes a small cleanup of the cats Makefile
75 to remove some references to non-existent files.
77 kes Modify win32 Makefiles to use full paths in most cases.
78 In particular add MAINDIR environment variable that points
79 to the main Bacula source directory.
81 kes Add read volume list code to SD -- not yet used.
82 kes Add James' binutils patch
83 kes Split volume management code out of src/stored/reserve.c into
85 kes Modify configure to do an automatic make clean. This ensures
86 that any changes to ./configure options are handled correctly.
88 Beta version 2.5.16 release:
90 ebl Rename JobStat table to JobHistory
91 kes Ensure that only normally terminated jobs are migrated.
93 kes Add Makefile dependency when using LIBTOOL_LINK so that any
94 change in ./configure options will be accounted for.
96 kes Fix typo in the ACL patch that I overlooked.
97 kes Apply Marco's libtool include patch.
99 kes Apply Bastian Friedrich's ACL patch to eliminate ACL
100 errors during restore.
101 kes Minor cleanup of create_restore_volume_list() code.
102 kes Fix typo in console Makefile.in
104 ebl Fix #1110 about RunScript that can't execute a script with
105 Unicode characters in the path.
107 kes Apply tray-monitor patch from Bastian Friedrich to make it
108 work with the new FD.
110 kes Apply cleanup patch from Marco
111 kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
112 that implements libtool to create shared objects out of
113 the Bacula libraries.
114 kes Fix tray-monitor so it will speak to new FD.
115 ebl Fix bug with ANSI label when volume name length < 6
116 ebl Fix segfault in debug level > 50 with btape.
117 ebl Remove warning message in btape when command is empty.
118 kes Fix Win32 build to pull in new BACULA define.
120 kes Change IncludeDir to Exclude Dir Containing.
121 kes Implement code to prohibit ExcludeDirContaining in an
122 Exclude section (same for Plugin and Options). A bit
123 of a kludge with RES_ITEM2 ...
124 ebl Add field to command list to restrict Runscript console
126 ebl Use a separate JCR when running Console command with Runscript.
127 ebl Permit to mark version as Beta in some outputs
129 kes Add plugin types in jcr.h to reduce need to cast.
130 kes Do better checking of plugin return values.
131 kes Free plugin context after calling pluginFree() as
133 kes Allow plugin to call JobMessage with NULL context.
134 kes Do not add plugin to global list if loadPlugin returns error.
135 kes Rework plugin.h a bit to reduce dependence on Bacula.
137 kes Move generation of bsr file for Virtual Backup to run section
138 so that it is generated just before actually running.
139 Suggested by Graham Keeling.
141 kes Add malloc and free Bacula entry points for plugins. Increment
142 FD plugin interface version. Create a Bacula plugin context
143 structure to keep track of whether or not the plugin is disabled.
144 kes Apply FileIndex fix for plugin name stream suggested by James.
145 kes List plugins in FD status report when debug > 0.
147 ebl Add a new VerId variable that is printed in version command.
148 kes Fix migration SQL not to migrate a job that has not terminated.
149 This is a partial fix to bug #1164.
150 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
151 backup start time bug reported by Graham Keeling.
153 ebl Fix possible bug in cancel_job() with job that are not
156 kes Fix bat build for Win32.
158 kes Copy plugin link field into ffpkt.
160 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
161 It provides FileRegex in bsr files and code to collect regex
162 from the user during restore, an Allow Mixed Priorities feature,
163 and documentation for the above.
164 ebl Remove db Berkeley from configure process
165 kes Do dirty check on hostname (Linux only) and if not resolvable
166 use localhost as default.
167 kes Increase vtape max block to 20GB.
169 kes Refactor restore code to create a close_previous_stream(). This
170 This may destabilize the source.
171 kes Implement planned startRestoreFile() plugin call.
172 ebl Remove missing Loaded information from status slots storage command.
173 ebl Fix Console command problem that cancels the job
174 kes Add more plugin restore debug code.
176 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
177 kes Rewrite plugin restore interface a bit to correspond to how Bacula
178 creates and writes to the restored file.
179 kes Add some DebugMessage() calls to the bpipe-fd.c program.
181 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
182 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
183 Bat; allow add and delete in place of mark and unmark.
184 kes Another attempt to fix the endRestoreFile plugin bug noted below.
186 kes Apply dbi driver patch from Joao.
187 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
188 Bastien Friedrich reported the bug.
189 kes Create plugin instance only when FD job starts.
190 kes Add new FD plugin event: bEventCancelCommand when
191 a cancel command is issued to the FD.
193 kes Add cmd_plugin flag to jcr so we can globally know if a
194 command plugin is running.
195 kes If command plugin running, do not attempt (for the moment)
196 to get Win32 extended attributes.
197 kes Ensure that proper Win32 flags are set in bfile packet
198 if plugin_bopen() works on Win32.
199 kes Remove generated src/plugins/fd/Makefile
201 kes Implement build and install of bpipe-fd.so plugin.
202 kes Rework the interface that passes packets to the plugin
203 so that the packet is started and ended by the packet size.
204 This allows the driver to do a sanity check.
206 kes Rework the pluginIO Bacula internal code to enable
207 proper handling of Win32 error codes from GetLastError.
208 kes Apply Joao's patch to regress startover_libdbi.
210 ebl Add -B option to dbcheck to get catalog information
211 kes Fix Win32 build to include new library function.
212 kes Remove some old reader/writer code.
213 kes Implement ./configure --with-plugindir=xxx
214 ebl Fix the mysql bug in the new accurate code
215 kes Improve plugin debug. Create plugin test.
216 kes Set main thread specific data to INVALID because it
217 has no jcr. This allows debug output to work correctly.
218 kes Add src/plugins/fd/Makefile to ./configure process.
219 kes Make first cut attempt to correct SQL that computes the current
220 Pool usage. This is to fix bug #1159.
221 kes Do a bunch of plugin cleanups for Win32 and more careful checking
222 of PluginDirectory and whether or not a plugin was found.
224 kes This code should fix the race condition that leads to a Director
225 crash at job end time when the job list is updated. This was reported
227 kes Add more plugin documentation and fix include of config.h for
228 Win32 build (I hope).
230 ebl Revert to htable instead of rblist
231 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
232 tree instead of htable.
233 ebl Use a dedicate DB link to compute and send the accurate list
236 kes Fix compile errors in filed/fd_plugin.c.
238 kes Remove all double quotes from SQLite creating script and
239 replace by single quotes as suggested by John Huttley.
241 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
242 It significantly improves the performance of dbcheck for
244 kes Fix bad debug code call in src/filed/accurate.c
246 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
247 output. Perhaps we really need to implement M_SAVED.
249 kes Fix bug #1156 FD crash during processing of Accurate data.
250 kes Tweaks to htable code to improved debugging and make names
251 a bit more meaningful.
253 ebl Remove time_t from update_stats()
255 kes Modify the license of the example plugin program to allow
256 it to be used by anyone for making a Bacula plugin.
257 kes Make apply_rp_codes() in bpipe-fd.c be static.
259 kes Remove Encryption and Accurate lines in vbackup output -- not used.
260 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
261 kes Add host name to items printed during dump.
262 kes Make Check File Changes default on.
264 kes Set the default FD timeout to 3 minutes (previously 30).
265 kes Apply Bastian Friedrich's weird spelling correction patch.
267 kes Always print Verify hash differences. Rename variable to make the
268 code slightly more readable.
270 kes Correct tests for MaxFullInterval as reported by
271 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
272 kes Fix MaxDiffInterval code as well.
273 kes Enable Win32 plugin load code in lib.
274 kes Make Verify code that computes disk checksums use the same
275 algorithm as backup when dealing with sparse files.
276 kes Attempt to run VSS on any systems newer than Vista -- should
277 make it work on Windows Server 2008.
278 ebl Change the new statistic implementation. Remove the UseStatistic
279 directive and add a 'update stats [days=...]' command. You can
280 now decide when copy job records from Job table to JobStat.
281 Statistics are much more accurate with this.
283 kes Fix SQL case problem that may cause the failure of DiskToCatalog
285 kes First cut adding SD plugins.
287 kes Add Slot if it is non-zero to writing bsr file after a
289 kes Change a number of bnet_fsend() into class method calls.
290 kes Begin audit of diff of 2.4 branch to trunk code.
292 ebl Fix the mysql creation script that double-created an
293 index of the same field on the Media table.
294 Add an index to on VolumeName to the Media table for mysql.
296 kes Another try at fixing Vbackup. It looks much better this time.
297 Disable file index sanity check in FD with value stored in
298 attributes record because with Vbackup the File Index gets
299 changed, but not the attributes record.
300 Enhance some debug code.
301 Fix handling of re-indexing records that are copied in Vbackup.
303 kes Made level_to_str() know about Virtual backup.
304 kes Set correct Virtual backup write pool.
305 kes Fix compile warning in new dbcheck port code.
306 kes Fix migration code broken by previous virtual backup fix.
308 kes Fix problem of Virtual backup not writing a sequential FileIndex.
309 kes Reset Virtual backup time/date to the value from the last backup.
310 kes Ensure that storage name is passed to SD on read.
311 kes Correct a problem with Level and Virtual backup, rework how
312 bsrs are printed in debug to use standard routine.
313 kes Apply patch from Chris in bug #1133 that provides alternate db port
315 ebl Remove catalog dependency from bcopy tool.
316 ebl Modify catalog scripts to have an easier packaging integration,
317 using default variables.
318 Make difference between SQLite3 and SQLite in db_get_type()
320 kes Apply most of changes in a patch from:
321 Michael Stapelberg <michael+bacula@stapelberg.de>
322 that allow the Bacula FD to compile on IRIX 6.5.
324 kes Apply patch from Bastian Friedrich that accepts a yes on a
325 delete volume command line.
326 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
327 job when reading from one autochanger and writing to another.
328 kes Minor tweaks (copyright dates convert to use method instead of bnet).
330 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
331 drives when no tape is mounted.
333 kes Add additional info to some SD messages.
334 kes Add fix supplied by Martin Simmons for turning off EOL character
335 in new console multi-command code.
337 kes Fix a Verify InitCatalog problem where in certain cases
338 a garbage filename may be entered in the verification database. This
341 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
342 sent in by Riyas Yoosuf.
344 kes Fix seg fault in Dir during estimate command with no level value
345 given. This fixes bug #1140.
347 kes Add message to migration job when the target job is already migrated.
348 This closes bug #1129.
351 kes Raise some restore debug levels.
352 kes Replace off_t by boffset_t where ever I found it.
354 kes Define a machine dependent ioctl request type for use with
357 kes When a migration job actually runs, re-check the Job record
358 and skip if the job is already migrated. This should
359 significantly reduce the problems with bug #1129.
361 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
362 turn off glibc checks that prevent getting good dumps.
363 kes Implement console 'wait mount' command. Doesn't yet work.
364 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
365 kes Break the do_swapping into do_unload, do_swapping, and
366 do_load. It is much more logical that way.
367 kes Implement a set_dcr_from_vol subroutine in acquire.c for
368 reading volumes. This allows the dcr to be refreshed after being
369 zapped when the wrong volume is mounted.
370 This should fix bug #1126 -- During multiple tape restore, bacula
371 does not ask for physical tape change, but rereads same tape
373 kes Apply patch submitted for bug #1107 with a small modification.
374 This fixes a bug where bcopy copied too many records.
375 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
376 This fixes bug #1124.
377 kes Make the default bat restore Pool be Any. This fixes bug #1118.
379 kes Remove debug statement that crashes the SD at the end of
380 a tape during restore. Fixes bug #1125.
382 kes Implement Win32 bat changes made to Branch-2.4
384 kes Tweak separator command in console to start disabled and
385 allow defining no separator character. Also make code a
386 bit more fault tolerant.
387 kes Make btraceback write the traceback to the working directory
388 before attempting to mail it.
389 kes Add a RFC to Projects.
391 kes Attempt to implement a kludge to make Qt work with bat
393 kes Setup rstorage correctly. Virtual backups are working.
395 kes Move setting JobLevel and JobType into a method, which should
396 allow completing Virtual Backups.
397 kes Fix verify jobs to work again.
399 kes Virtual Backup tweaks -- it is close to working.
401 kes Ensure that SD tried to mount a volume not in an autochanger
402 at least once before asking for operator intervention.
403 kes Make SD aware of Virtual Backup jobs.
404 kes Add VirtualFull for bat.
405 kes Changes to get read storage correct for Virtual Backup.
407 kes Remove old code from label.c
408 kes Split display_display_info() out of write_bsr_file()
409 kes do_vbackup_init() working -- i.e. bootstrap file built.
410 kes Change Bacula trademark owner from John Walker to Kern Sibbald
411 kes First non-working cut of vbackup
412 kes Correct FD heartbeat code to use volatile variable accessed by
414 kes Zero thread id with memset if on Win32 in case it is a struct.
415 kes If cannot create JobMedia record, continue to try to write eof
416 and clean up in block.c
418 kes Add code to interface OpenSSL to new Win32 pthreads code which
419 used a structure for thread_t.
421 ebl tweak bat for win32 compilation
423 ebl Remove tokyo cabinet from the source
424 ebl Update configure/autoconf to support berkeley DB
425 ebl Add a sort to db_get_file_list() to improve bsr construction time.
427 kes Add a mtx-changer.conf file that is not overwritten during
428 an upgrade. It fully configures the mtx-changer script.
429 kes Clear in-use bit on vol when unused while swapping.
431 kes Remove sleep at end of ./bacula
432 kes Clear hash packet for hardlinked files correctly. This corrects
433 a long standing bug where hardlinked files selected individually
434 would occasionally not be restored.
436 kes Apply Eric's patch to ensure that autoprune does not return
437 a Volume not in the autochanger unless requested to do so.
438 kes Correct bat restore display of multiple drives. This fixes
440 kes Do find_a_volume() each time an unload is done. This
441 fixes the failure of maxvol2-test.
443 kes Add some SD debug code.
444 kes Do find_a_volume() each time an unload is done.
445 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
446 and adds --with-db-port to ./configure.
447 kes Use Qmsg() in job.c watchdog callback.
449 kes Release main control rwlock if ABORTing.
450 kes Make watchdog connect timeout queue messages rather than sending
451 directly to avoid lock conflicts with the real thread.
452 kes Add const char in dbd.c to avoid compiler warnings.
453 kes Fix python compiler string warning. Note, IMO the GNU C++
454 compiler guys have made a *very* bad change to their compiler.
455 They now force all strings to be 'const' unless you explicitly
456 cast them, which is extremely ugly and ruins nice code as well
457 as creates a lot of useless work.
459 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
460 mt. This fixes bug #1116.
461 kes Add const in python files to reduce compiler warnings.
462 This may have to be backed out because of later compiler
464 kes Fix failure of 2drive-concurrent-test. Always read label;
465 clear_unload() only after drive is defined in acquire_for_read().
467 kes Generally clean up the manual tape loading code. The main
468 conceptual change is that when a volume is marked to be unloaded,
469 its volume name is retained, and it is only marked as unloaded
470 when either the autoloader says it is unloaded or another tape
471 is read on that drive.
473 kes Add debug code and refactor subroutine in stored/mount.c
474 kes Fix format problem in bscan output reported in bug #1105.
475 ebl Fix get_next_volume_for_append logic with autochanger
476 - use pruned volumes if found
477 - don't reset the inchanger flag after getting a recycled volume
479 Fix recycle_oldest_purged_volume to take InChanger flag in account
481 ebl Add mmap/unmmap implementation for tokyodbm under win32
483 kes Make first step toward eliminating globals from config
484 scanning. Also should be a workaround for FORTIFY_SOURCE
485 GNU C bug -- fixes bug #1042.
487 kes Apply duplicate job tests to restarted jobs.
488 kes Copy more data when restarting a job so that run
489 overrides are kept. This should fix bug #1094.
491 kes More word alignment cleanup.
492 kes Fix bug where SD did not ask operator if the device could not
493 be opened. Reported by Eric.
495 kes Add dbuser to DIR conf file (replaces user).
496 kes Add --with-db-password to ./configure
497 kes Fix regress to handle db_password.
498 ebl Add new 'status storage slots' that list autochanger
500 ebl Update vtape driver to compile only under Linux.
501 ebl Fix a bug when restoring with a wrong mediatype.
503 kes Eliminate ints from conf files and structures to avoid
504 word alignment problems
506 kes Fix bug reported by Scott Barninger where the bacula script
507 refers to scripts in the wrong directory. Needed to meet the
508 requirements of recent FHS location changes.
509 ebl Disable vtape for FreeBSD.
511 ebl Modify disk-changer to check if slot contains something before
514 ebl Fix vtape on win32 and debian.
515 ebl Fix autoselect patch (cause segfault).
517 ebl Fix autoselect option broken for a while. Fix #1089. Need some
518 work with StorageId to be able to use a particular drive in a
521 ebl Rename vtape to vtape.
522 ebl Update vtape driver.
524 ebl Modify vtape driver to avoid sparse file.
525 kes Add make clean of qt-source directory during ./configure
526 kes Store last block number written to tape in DEVICE and
527 use it for testing for correct last block on EOT.
529 Release Version 2.4.0:
533 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
534 This fixes bug #1095.
536 kes Add create_postgresql_database.sql to Win32 installer. Should
537 fix problem reported by Juilio Monteiro.
538 kes Get correct slot when auto unloading a device. This fixes bug
541 kes Fix multiple media restore.
542 kes Make DEVICE Slot private and access it via a method.
543 Allows better control over when it is set and cleared.
544 kes Fix possible seg fault if SQL error.
546 kes Add Martin's fixes to argument scanning for the estimate
547 command. This fixes bug #1093.
548 kes Add debug code to SD.
549 kes Fix renaming a Volume, which used the wrong Volume name.
551 kes If operator has rewind tape, print warning, release tape and
552 try once more. If tape is positioned somewhere, something went
553 wrong, so mark the tape in error and try once more. Previously
554 this error was fatal, now it produces an error message.
555 kes Ensure correct volume name displayed during restore
556 kes Ensure that Volume is mounted for restore.
558 kes Fix a few more Coverity reported problems.
560 kes Apply Allan Black's status dir job count patch.
561 ebl Add information about IMPORT/EXPORT slots in mtx-script.
562 kes Enhance a couple of SD debug messages.
563 kes Tweak unload flag setting and ensure it is set during swap.
565 ebl Fix #1091 about bad output in estimate command.
567 kes Modify autochanger locking to attempt to avoid race
569 kes Make sure device not busy before doing label command.
570 kes Display open() errors except when polling. Previously too
571 many were suppressed. This should fix bug #1070.
572 kes Fix Win32 reparse points. Bacula will not recurse into any
573 reparse point directory, including mount points, unless the
574 directory is explicitly mentioned at the top level (same as
575 with Unix). A file that is linked to another file will be
576 backed up -- much as Unix does for hardlinked files.
577 This fixes bug #1041.
579 kes Remove double quotes from ChangeLog and ReleaseNotes
580 kes Remove StorageId test when pruning and recycling (Eric's changes).
581 kes Remove old form of locking when getting volumes -- causes deadlock.
582 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
583 the name unique and to eliminate compile time error.
584 kes Add accurate.o to Win32 FD Makefile
586 kes Fix cats dll build on Win32 after db_update_job_end_record
587 calling sequence change.
588 ebl Switch to tokyo dbm instead of htable in accurate code
589 ebl Include tokyo dbm to bacula source tree
591 kes Fix buffer overruns detected by Coverity.
593 kes Tweak joblog display.
595 kes Implement --without-qwt
596 kes Fix layout of restore tree dialog
597 kes Add configure bat QWT libraries, so that bat can be built
598 with or without the QWT libaries.
600 ebl Add dummy tape driver for regression tests.
601 kes Make sure we unload the right slot when swapping.
603 kes Add debug times, reduce size of two-pool-changer test
605 ebl Tweak autoconf scripts for vtape
607 kes Improve SD reserve debug code.
608 kes Testing an improvement to free up volumes no longer in use.
610 kes Rework SD acquire for read to handle autochanger Volume
612 kes Implement regression that explicitly tests swapping a Volume
613 from one drive to another.
614 kes Enhance disk-changer to detect most error conditions.
615 kes Fix SD code so that it properly swaps a Volume between drives.
616 This fixes bug #1083.
618 kes Apply libdbi patch from Joao Freitas for regress and for
619 Bacula trunk. Regress now works with libdbi. Nice.
620 kes Apply .nobackup patch from bug #1077 submitted by
622 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
623 name into jobs cloned via the run directive.
625 kes Prevent a Volume that is being swapped from being freed from
626 the volume list. This will most likely fix, at least partially,
628 kes Fix strippath so that it does not get a buffer overrun and crash FD.
629 This fixes bug #1078.
630 kes Remove 50 millisec wait in SD that broke debugger.
631 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
632 that a job may run, counted from when the job was scheduled.
633 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
634 a job may block waiting for a resource, counted from when the job starts
635 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
636 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
637 that implements multiple commands per line in the console when using
638 readline. Modify the default to use a semicolon as the command separator.
640 ebl Fix SQL query in migration code.
641 ebl Make accurate mode with hash disk pass regression tests
643 ebl Implement first cut of accurate backup with hash disk.
645 kes Force unload of volume when wrong volume mounted in SD.
647 kes Fix bat seg fault at termination.
648 kes Add Bacula generated version to bat about box.
651 kes Experiment with allowing multiple read jobs.
652 kes Move final volume swapping code to DCR method and
653 call it from acquire_for_read().
654 kes When wrong volume is mounted during read, unload_autochanger.
656 kes Integrate the libdbi changes from Joao Henrique Freitas
658 kes Stop searching for Volumes in SD askdir if DIR returns the
659 same volume name twice in a row.
660 kes Close bat console windows first to eliminate error message
663 kes Tweak the swap Volume from one drive to another code so that
664 it now seems to work.
665 kes Resolve several problems with recycling that broke the new
666 code (these problems are in 2.2.9 as well).
667 kes Remove the volume lock when calling the sysop code.
668 kes Don't mark a reserved volume with no writers as unused otherwise
671 kes Rework class structures for VOLRES, DCR, and DEVICE to make
672 the method names a bit more logical, and for more logically
673 handling the responsibilities.
675 kes Remove redundant code in terminating the scheduler that just
676 causes a seg fault in many cases.
677 kes Cleanup releasing a volume and make it a DCR method.
678 kes Improve algorithm for detecting pre-reserved volume and
681 kes Tweak volume swapping code so it works.
682 kes Correct name overloading in mount.c
683 kes Replace released flag in VOLRES with reserved and add access
684 methods for the VOLRES class.
685 kes Prevent volume from being released while being swapped.
686 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
687 plugin that add %w (where) and %r (replace flag) editing to
689 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
691 kes Refactor parts of stored/mount.c
693 ebl Add sanity checks for VolWriteTime and VolReadTime
694 ebl Take care of bad clock changes while computing VolWriteTime
695 and VolReadTime. This should fix or limit #1066
696 kes Correct error string numbers in dird/catreq.c
697 kes Restructure reserving, acquiring, and mounting volumes. Calls to
698 autochanger are deferred for mount.c -- simplifes the code.
700 kes Do not prune any running job. It just fails the job.
701 kes Lock the volumes when changing dev->reserved_device and marking
702 the volume unused otherwise the device can get reserved by
703 another job before the volume is released, thus blocking it.
705 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
706 kes Fix bug #1063, reuse of freed ptr in list nextvol.
707 kes Release regex compile buffer in filed/job.c
708 kes Add proper type of const char in sql_create.c
709 kes Turn off debug in daemon termination routines
710 kes Move free_volume_list() before devices are freed in stored.c
711 kes Fix reference to uninitalized stack variables in bregex.c.
712 This should correct bug #1067.
714 kes Fix possible seg fault in SD when freeing a volume entry.
716 kes Implement unload_dev() before swap device.
717 ebl Add statistics prunning with option and menu
718 kes Separate unload_dev() from unload_other_device() in autochanger.c
720 kes Apply patch from bug #1069 that corrects spurious error messages
721 when ACLs enabled on SGI but no ACL exists.
722 ebl Fix small segfault in bacula-sd when debug level is 500
723 kes Modify run_program() and run_program_full_output() to use
724 call by reference for the results string. This corrects a long
725 standing problem where the address of the string may be changed
726 in the subroutine but not in the calling program.
728 kes Re-enable code to remember last volume mounted on a non-tape
730 kes Add patch supplied in bug #1068 that fixes a SD crash when using
731 a Virtual autochanger.
732 kes Generate correct JobMedia records during spooling/despooling when
733 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
734 <tih@hamartun.priv.no> for excellent analysis and testing.
736 kes Tweak hash algorithm for htable using Martin Simmons idea
737 for doing a circular shift.
738 kes Remember what volume is in VTLs (previously turned off for
740 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
741 pointed out some problems in creating JobMedia records during
742 spooling with concurrent jobs. Fix the problem by updating the
743 start file position before despooling and generate a jobmedia
744 record at the end of despooling.
746 kes Fix handling of JobMedia records during spooling and when a
747 Volume is changed without actually writing data to the Volume.
749 kes Rework certain SD locking based on gdb tracebacks of deadlocks
750 sent by Eric. This code now uses only the volume_lock() rather
751 than the reservations lock when at EOM and acquiring a new
753 kes Ensure only one exit point in several subroutines.
755 kes Implement bsock code to permit locking. Use the new code in Verify
756 in the FD to prevent the heartbeat thread from disrupting the Verify
757 data sent to the Dir.
758 kes Modify SD locking to eliminate locking the reservations system from
759 outside the system. Use the volume lock when getting media data
760 and reserving a new volume at end of media.
761 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
762 when SD starts are not locked into place.
764 kes Fix error compiling runscript code on 64 bit machines.
765 kes Tweak Win32 mount point code.
766 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
767 cleared giving bad file estimate).
768 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
771 kes Keep Schedule run lists in order as suggested by
774 kes Implement autostart scripts for Debian.
775 ebl Implement upgrade catalog scripts.
777 ebl Apply jobstat patch for long term statistics. Have to implement
778 purge stats command and upgrade scripts.
779 kes Fix mtx-changer.in for broken Debian mt program.
781 kes Fix large number of JobMedia records reported by Eric Bollengier.
783 kes Apply doc fix from bug #1062.
784 kes Resolve crash and improper restore wx-console Win32 restore
785 GUI. Fixes bug #1065.
786 kes Update Win32 wxWidgets to latest version.
787 kes Attempt to do correct handling of Win32 mount points. Should
789 kes Fix Win32 FD backup/restore memory leak due to improper termination
790 of BackupRead/Write. This fixes bug# 1038.
792 ebl Reduce memory usage for accurate backup, working only with ctime
793 and mtime. (not all Lstat field)
794 About 40MB for my Linux system (400.000 files)
796 kes Add dcr->reserved_volume flag that allows us to release a volume
797 even if it is not vol->released. This allows maxvol2 to work when
798 Volumes expire and we are already writing to the device (i.e. a
799 volume is pulled out from under us by another job terminating after
800 we reserve the drive).
802 ebl Permit multiple command/console per runscript definition.
803 RunScript { command = /bin/true ; command = /bin/false ... }
804 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
805 (restart an application) just after the VSS snapshot on windows.
806 kes Don't zap dcr values during release_volume() as they might
807 have the next Volume to be mounted.
808 kes Fix AIX prototype.
810 kes Second cut of drive switching during backup.
813 kes Update Win32 version of wxWidgets to most recent version.
814 kes Tweak Copy job details.
815 kes Rework dir_find_next_appendable_volume to make a bit more effort
816 to find a suitable volume before giving up.
818 kes Make ask_sysop_to_create... to return if waken from wait.
819 This helps get out of blocked conditions.
820 kes Experimental implementation of switch_device in reservations.
821 kes Implement FD version to allow easier protocol changes.
822 kes Add Plugin Options string -- not yet passed to FD.
823 kes Implement PluginOptions ACL.
825 kes Attempt to correct problems with restores with autochangers and
826 use counts going negative
827 kes Rework SD status command and implement API for bat. Implements
828 header, runing waitreservation, devices, volumes, spooling,
829 and terminated status keywords.
830 .status storage=xxx <keyword>
831 kes Clarify TLS error message by adding double quotes around name.
832 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
833 kes Pass jcr to tls routines so debug messages can be handled better.
834 kes Rework jobq resource allocation code, and possibly fix a bug
835 that caused reference counts to get out of sync.
837 kes Rename fd/dir plugin to use Bacula standard underscore.
838 kes Plugin work -- bring dir up to fd level.
839 kes Start implementation of VTL code
840 kes Fix Win32 build after adding new cats subroutine.
842 kes First cut at Duplicate Job implementation.
844 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
845 kes Start PluginOptions string, and refactor a bit of ua_run.c
846 ebl Apply Allan patch that permit to reset recyclepool.
848 kes Test patch -- possible fix or improvement for bug #1053
849 kes Refactor FD and SD status commands to permit new API code in
850 SD, and to fix Win32 build.
851 kes Win32 build is now working.
853 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
854 some ideas in patch from Scott Bailey.
855 kes Begin implementation of duplicate Job control.
856 kes Fix some of Win32 build after recent additions.
857 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
858 which causes the FD to detect whether or not the OS has the
859 honor no dump bit (*BSD systems), and if so, to skip backing up
860 any file with this bit set. The feature is enabled by setting
861 'honor no dump flag = yes' in the Options section of a FileSet.
863 kes Correct po warning message with datarootdir
864 kes Implement more code in dird.c to put configuration parsing in
865 a class rather than use globals.
866 kes Restructure SD status command for implementation of bat API
869 kes Suppress incorrect 'Will not descend from x into y' messages.
870 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
871 daemon globals used by parser.
872 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
874 kes Fix free of plugin_list when none exists.
876 ebl Apply accurate project patch.
878 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
879 on non-mempool object)
880 kes First cut of converting FD .status to work with bat API.
882 .status client=XXX header
883 .status client=XXX running
884 .status client=XXX terminated
885 kes Implement first cut of Copy Job.
886 kes Implement Catalog in Pool resource. It overrides catalog specified
887 in the Client resource.
889 kes Apply patch (with some difficulties) from Joao Henrique Freitas
890 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
892 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
893 ftruncate() actually works. In the case of some (cheap) NAS devices,
894 it does not, and so recycling NAS Volumes does not work. The code
895 simply unlink()s the file, then recreates it. This fixes bug #1011.
897 kes First incomplete cut of big malloc blocks for htable.
898 kes Tweak plugin code.
900 kes Plugin debug code + tweak a couple bat dialog layouts
902 kes Fix creating first JobMedia record during Migration to include
903 proper index. This caused slow restores of migrated jobs.
904 kes Temp fix to plugin name file_index.
905 kes Bacula backed up and restored a MySQL database.
907 kes Implement plugin restore.
908 kes Implement parsing of db_driver to give db_type index.
910 kes First cut of plugin restore code.
911 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
912 and do not strip paths on symbolic links.
913 kes Set catalog backup database and user name from values specified on
914 the ./configure line.
915 ebl Fix #1031 about wrong pool source information in job report.
918 kes Remove a redundant jcr argument to find_files, match_files, and
920 kes Implement '.status dir header|scheduled|running|terminated' that
921 prints the requested status section. With the exception of the
922 header, the other reports have fields separated by tabs (\t).
924 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
925 a resource embedded run command to find a since time if no explicit
926 since time was supplied on the command line.
927 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
928 that updates the state file at job termination time in addition to
929 when the daemon terminates.
931 kes First version where a plugin did a backup.
932 bpipe-fd.so created a backup file, wrote a test
933 string to it, and Bacua could restore this fabricated file.
935 kes Implement DB Driver = string for the DBI driver.
936 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
937 kes First cut of code for loading Win32 plugin dlls. Implement
938 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
939 and implement a dlfcn.h file based on opengroup's definitions of
942 kes First cut plugin directives.
944 kes Apply patch from bug #1049 to prevent stripping the path on a
946 kes Attempt to fix bug #1047 where stripping a path corrupts the
947 heap. Waiting for feedback.
948 kes Correct the Mount message not to suggest labeling a new tape
949 when doing a restore. Submitted by email by John Stoffel.
950 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
951 FD by using casting. Reported in bug #1042.
953 kes A bit of crypto cleanup. More later.
955 Release Version 2.2.8
957 kes Apply patch from Martin to correct bug #1040, bscan sets existing
959 kes Fixed important spelling error in doc -- bug #1045.
961 ebl Fix bextract to be able to extract non-portable Win32 data to
963 kes Move initialization of read/write res lock earlier in the code.
964 This fixes the crash with a null conf file. This fixes bug
966 kes Redefine CURES in lib/parse_conf to be URES and move it all
967 into lib/parse_conf.c -- this responds to bug #1042, but does
968 not fix it. The fix is not to compile with FORTIFY_SOURCE.
969 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
970 the trunk SVN. I don't think this was reported as a bug.
972 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
974 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
976 kes Add DataDespooling and DataCommitting status (committing is
977 the last despooling).
978 kes Finish implementation of new reservations code noted below.
980 kes Fix bsnprintf for float point numbers. I broke recently when
981 parameterizing some variables. This fixes bug #1036.
982 kes Undo recent reservations changes ... will apply them later
983 when they work better.
985 ebl Fixes #1034 which cause mysql to hang the connection after 8h
986 ebl Change default statistics target of filename.name and path.path
987 fields for PostgreSQL. This speeds lookup by indexes. Thanks
989 kes A few more tweaks to new reservation code. Make sure to clear
990 vol released flag when retaking volume. When reading label and
991 label is bad mark volume unused. When recycling, mark volume
992 unused so it can be renamed.
994 kes Fix reserve_volume() so it doesn't release a volume in use
995 (i.e. a volume entry not marked released). This should be
996 the last part needed to fix bug #1018.
998 kes Move Heartbeat documentation from Job to Director resource.
999 This fixes bug #1033.
1001 kes Fix existing switch drive SD code to call autochanger to release
1002 any old volume. This must be done to keep the autochanger from
1003 releasing subsequently newly reserved volumes in doing a close().
1004 This should fix bug #1018.
1005 kes Fail if attempting to get console input in batch mode. This
1006 should help fail RunScript console commands that are incomplete.
1007 kes First cut implementing switch_drive() in SD (not actually called).
1009 kes Implement first cut running console commands in a RunScript.
1011 ebl Fixes bug #1028 where 'Selection Type' option was not usable
1013 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
1016 Release Version 2.2.7
1018 kes Add new free_tls() entry point so that Win32 builds.
1019 kes Fix compile warning in src/lib/util.c
1020 kes Fix entry point for edit_job_codes() so that Win32 builds.
1021 kes Fix seg fault Frank Sweetser reports in regression testing
1022 on his systems. The problem was that the original author of
1023 bsnprintf.c did not take into account the side effects of
1024 using ++x in the argument to a #define.
1025 kes Make SD protocol backward compatible with version 2.2.x.
1027 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
1028 because Bacula no longer restores sockets.
1029 ebl Always use ignorecase fileset option on win32 FD.
1031 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
1032 that implements double quoting include names in conf files,
1033 and also allows piping input by having the first character
1034 be a vertical bar (|).
1035 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
1036 that implement %f in RunScripts to pass the FileSet name.
1037 kes Skip leading | when lex input comes from a pipe as suggested
1038 by Michael Stapelberg <michael@stapelberg.de>.
1040 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
1041 Nerijus Baliunas <nerijus@users.sourceforge.net>
1043 kes Implement Plugin Directory and plugin events.
1045 kes Implement a security enhancement: TLS authentication but no
1046 encryption. Enabled by setting 'TLS Authentication = yes'.
1047 Note when this is on, TLS encryption is turned OFF!
1049 kes This patch corrects a problem where the maximum concurrent storage
1050 jobs counter gets out of sync during restore jobs causing jobs to
1051 'wait on max Storage jobs'. This patch fixes bug #1009.
1053 kes This patch fixes bcopy so that it produces correct Volumes.
1055 kes This patch eliminates spurious output to the console during a VerifyVolume
1056 job that contains encrypted data. It fixes bug #1024.
1058 kes This patch prevents the 'status dir' command from trying to use a scratch
1059 volume and possibly moving it from one pool to another. This patch fixes
1062 kes Add new include to postgresql.c suggested by Marc Cousins so
1063 that it compiles correctly with pgre version 8.3.
1065 kes Fix --archivedir addition to configure. Replace it with
1066 --with-archivedir in configure.in This fixes the regression
1068 kes This patch fixes bug #1012 where the job is canceled because
1069 of Max Run Time exceeded when the job has not yet started.
1071 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
1072 one 'part' to write. Instead of each part being stored on disk,
1073 written to DVD, then deleted from disk, all parts are written to disk,
1074 and only the last is written and deleted from disk.
1075 kes This patch fixes the status command to include the formating string for
1076 JS_AttrInsterting. It fixes bug #1021.
1077 kes This patch should fix the Mac OS X build problem on the latest
1078 Darwin, where sys/types.h was not included correctly (apparently
1079 due to a change in the Mac headers). The solution was to explicitly
1080 ensure that it is defined for the ./configure.
1081 This patch also has a rebuild of configure that includes the Debian
1082 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
1083 kes This patch should ensure that queued messages to the console are
1084 displayed as soon as possible. It should fix bug 1007, but has been
1085 reported not to work.
1087 kes This patch fixes the infinite loop when trying to increase the
1088 maximum number of volumes in a Pool during the add command.
1089 This patch fixes bug #1008.
1091 Release Version 2.2.6
1093 db Remove extra data on estimate command in joblist for bat.
1095 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1096 really change anything, but is the beginning of doing it *right*.
1097 To do it completely right the LastWritten date must be passed to
1098 the SD, but it is not yet done.
1099 kes Minor tweaks to some bat restore SQL.
1100 kes This patch fixes bug #1003 where putting the message output from
1101 a Verify job into the catalog results in a recursive loop. The problem
1102 seems to show up only with postgresql (to be verified).
1103 kes Correct %x to %p in postgresql debug statement.
1105 kes Fix bug #942 where lots of emails where generated when the heartbeat
1106 interval was low and Bacula wanted a different tape from the one in
1109 ebl Add new SD despooling attributes and Dir inserting attributes
1110 job status codes in the catalog (Status table).
1112 ebl Use qmake-qt4 instead of qmake when available (debian system).
1114 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1115 that passing the password via the command line (arg 3) is insecure.
1116 This responds to bug #990 (it doesn't fix it).
1118 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1119 kes Fix a crash in bat when it cannot connect to the Director for example
1120 if the Director is not running.
1121 kes Remove redundant INDEX (JobId) from File table in the trunk.
1122 This fixes bug #992.
1123 kes Make explicit exception to GPL in LICENSE to permit linking
1124 the Win32 FD with Microsoft VSS code.
1125 kes Apply the Solaris package patch from
1126 Masopust, Christian <christian.masopust@siemens.com>
1127 kes Apply the patch to optionally add a timestamp in the debug output
1128 submitted by Mariusz Czulada <manieq@wp.eu>.
1130 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1131 backend (sql_strerror). Fixes bug #989
1133 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1134 It applied with no problems.
1135 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1136 awk are on the path.
1137 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1138 since the status is returned on stderr on Solaris.
1139 kes Activate Close button on tray-monitor window. This fixes
1141 kes Check for NULL item in parse_conf.c before calling it. In the
1142 case of Device, there is no item and this caused a seg fault when
1143 Device appears in the conf file.
1144 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1145 avoids pulling in config.h multiple times in some new code.
1147 kes Fix spurious warning message printed when creating a volume with
1148 a LabelFormat. This fixes bug #976.
1150 Release Version 2.2.5
1152 kes Add JobId in place of Job name in all the Jmsg() output.
1153 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1155 kes Make maxvol-test and new more strict maxvol2-test work.
1156 kes Print JobId in all Jmsg() job output.
1158 kes Add new SD despooling attributes and Dir inserting attributes
1159 job status codes. This fixes bug 961.
1160 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1162 kes Fix doc issue. This fixes bug #963.
1163 kes Fix listing performance problems in bat. Pointed out by
1165 kes Remove old debug code.
1166 kes Fix bat code that tests for Win32. This should fix bug #968
1167 kes Query 5 list wrong Vol after migration. This fixes bug #960
1169 ebl Fix #969 where user can't change Replace option in restore menu.
1171 kes Save jcr in thread specific data (tsd) for each thread.
1172 kes Make Dmsg() print JobId as -%u.
1173 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1174 for the thread if it exists.
1175 kes Remove old reservation debug jid code.
1176 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1177 ebl Add an option that permit to specify spool size in job
1178 definition. (Applying patches/testing/spoolsize_per_job.patch).
1179 You must upgrade SD and DIR at the same time.
1180 dvl Add new configuration item --archivedir
1181 dvl Adjust regression tests to use tmp not /tmp. This will allow
1182 multiple concurrent runs of the regression tests.
1184 kes Fix race condition that drops final block written to volume.
1185 This happens in rare cases with multiple simultaneous jobs
1186 when the Volume fills. This fixes bug #964. May be related
1187 to bug #935 and possibly #903.
1188 kes Eliminate more strerror() and replace with bstrerror().
1189 kes Remove BSD getopt and replace with unrestricted IBM version.
1190 kes Fix Win32 build for changed calling sequences.
1191 kes More tweaks to the mount volume routines to get everything
1192 right. Changed variable name from find to have_vol, which is
1193 much easier to understand.
1194 kes Enhance btimer debug code.
1196 kes Fix FD->SD authorization failure, which was due to spurious
1197 wakeups from a pthread_cond_timedwait(). Simply check the
1198 predicate before continuing. This fixes bug #953.
1199 kes Add const char where needed (more to do). Remove temp debug code.
1201 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1202 kes Don't overwrite error message in check_tables_version.
1204 kes Unlock batch insert tables with same calls used elsewhere.
1205 kes Allow starting 59 jobs a second.
1206 kes Make SD session key more random.
1207 kes Add retry for SQLite opening db if it fails. Probably helps
1209 kes Suppress extra error messages during batch insert failure.
1211 kes Add jcr to timer packets so if killed message can be sent to job.
1212 kes Add JobId to all Dmsg() output.
1213 kes Put some FD auth code on dbglvl rather than fixed.
1214 kes Return insert attributes error message in db msg buffer to avoid
1215 false error messages. Helps fix bug #966.
1216 kes Separate batch init error messages. Probably helps fix bug #966.
1217 kes Make SD code that contructs attribute insert check string lengths
1219 kes If Dir gets an error during inserting attributes, cancel SD.
1220 This reduces unnecessary error messages.
1222 kes Correct search boolean for getting Volume info
1223 ebl Cleanup batch insert code. Probably fixes bug #965.
1224 kes Back out one small change to the reservation system (reserving a volume).
1225 kes Rework how a Volume is mounted. It is now much more intelligent and
1226 will always attempt to use any mounted volume if possible and reduces
1227 calls to the Director asking about volumes.
1229 kes Turn off some code when batch insert not enabled.
1230 kes Edit FD name in connect error messages.
1231 kes Rework the reservation system to take into account that the Director
1232 might give us a Volume that is different from the current one being
1233 used, and to ensure that we don't exceed Maximum Volume Jobs.
1234 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1235 fatal error with multiple jobs running'
1236 kes Add more debug code in reservation system.
1237 kes Implement maxvol-test to check bug #947.
1239 kes Add code to handle tray monitor separated from Win32 FD.
1240 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1242 kes Add missed return in fixing verify bug -- trunk only.
1243 ebl Fix a command parser issue causing a director segfault.
1244 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1245 This fixes bug #954.
1246 kes Increase the max block size to 4MB fixes bug #957.
1247 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1248 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1249 is not properly mounted (recognized) during a poll.
1250 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1251 Job that has differences reports Verify OK.
1252 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1254 ebl Add an option to operate on all pools with update vol parameters.
1255 This complete the project 20. Patch from Nigel Stepp.
1256 ebl Add history support to bconsole when using readline.
1257 Using Ctrl-D to exit doesn't update .bconsole_history
1258 kes Modify new volume algorithm to use max MediaId for generating next
1259 volume number rather than the count of Volumes. This should essentially
1260 eliminate the failure rate if some volumes were deleted. Bug #921.
1261 kes Begin implemention of Optimize Job Scheduling.
1262 kes Implement restore callback that Dirk and I agreed on for bat
1263 restore. This fixes bug #928. Restore of backup of zero files fails.
1264 kes Fix SQL Catalog logging which broke with new db_escape_string
1267 Release Version 2.2.4
1269 kes Fix bacula_cats.def for new db_escape_string().
1270 kes Increase size of name string when FD making connection to SD.
1271 May fix bug #953. FD->SD connection failure.
1273 kes Add code to help Dan debug 2drive-incremental-2disk test.
1274 kes Add code to try to fix bug #908.
1275 kes Add waits to multiple exit detection code to try to force pid
1276 file to always be deleted.
1277 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1278 This fixes bug #950.
1279 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1280 trying to switch drives by checking for blocking before unblocking.
1282 kes Cancel storage daemon in all cases where FD reports error. This
1283 should fix virtually all cases of bug #920.
1284 kes Fix db_escape_string() for MySQL which did not compile.
1286 kes Fix error message that was clobbered when Dir tells SD it does not
1287 have write permission on Volume. This should fix a minor point
1288 in bug #942, but not the main problem.
1289 kes Add code to cancel job in SD if FD connection fails. This should
1291 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1292 dvl Pass jcr and db into db_escape_string() to enable better escaping
1294 kes Fix migration code to get correct Volume name with multiple volumes
1295 by skipping |. Fixes bug #936.
1296 kes Implement patch supplied by Landon to fix bug #944 where using
1297 TLS with bconsole uses 99+% of the CPU.
1298 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1300 kes Move patches into patches directory.
1302 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1305 ebl Using 'm' in bconsole will show messages like before,
1306 and not memory usage.
1307 kes Fix bug #935, and probably also bug #903 where files were not
1308 restored. MediaId was not properly set in JobMedia record after
1311 kes Suppress chown and chmod error messages if the FD is not running
1314 kes Apply Martin Simmons' patch that should turn off the new API usage
1315 when batch insert is turned off allowing building on older
1317 kes Add ./configure search in qwt-qt4 for qwt package
1319 kes Bacula is now free of 3rd party GPL copyrighted code!
1320 kes Remove idcache.c
1321 kes Add guid_to_name.c/h which replace idcache.
1322 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1324 ebl Detect if new PosgreSQL batch insert API is present.
1325 kes Correct incorrect mempool call causing Director crash. Occurs on
1326 systems without va_copy().
1327 sb Update spec files for 2.2.1 release
1329 kes Fix memory pool call in ua_output.c. bug #934.
1330 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1331 Add test program to fnmatch.c
1333 kes Integrate patch to README.vc8 from
1334 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1335 edit it to get it into Unix patch format.
1336 kes Implement mkpath.c to replace old FSF makepath.c
1338 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1340 Release Version 2.2.1
1342 kes Update POTFILES.in
1343 kes Cleanup a few underquoted AC_DEFUNs in configure
1344 kes Apply patch from Martin Simmons that adds a test for va_copy to
1347 kes Fix bug #921 by increasing the number of tries to create a new volume
1349 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1350 can be called multiple times. Implement a version for machines
1351 without va_copy() that gets a big buffer.
1353 kes Integrate more portable zone offset code into bsmtp.c
1354 Submitted by Attila Fülöp.
1356 kes Fix bad SD->FD return status reported by
1357 (James Harper) <james.harper@bendigoit.com.au>
1358 ebl Fix a bug in read_close_session which return random status
1359 thanks to James Harper
1361 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1362 and directory names during restore of single file/directories.
1363 kes Add sanity checks to .sql command when string is empty. Hopefully
1364 that will resolve Dirks Director crash.
1366 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1367 in the bsmtp chat subroutine when debug is >= 10.
1369 kes Fix Director crash when running bat SQL queries.
1370 kes Add David's notes on Item 8: Copy pools.
1372 kes Rework projects file to be current and ready for a vote.
1373 kes Enhance lex scanner error message.
1375 kes Tweak LICENSE file to mention BSD code.
1376 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1377 if specified on the ./configure.
1378 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1379 This class is intended to allow us to open a second bsock to the
1380 Director while in the restore subdialog.
1382 kes Fix configure to create bat Makefile before creating dependencies.
1383 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1384 kes Add a tooltip to the tray monitor.
1385 dvl Set the Director's PID file before dropping privs. This fixes
1388 kes Update AUTHORs file
1389 kes Increase the default max concurrent jobs to 20 in FD and SD to
1390 correspond with the default .conf files.
1391 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1392 some different, of the same file created by RN when porting the
1394 kes Rearrange some of the Win32 directories and the placement of the files
1396 kes Set DEVELOPER flag in version.h
1398 ========================================================================
1399 Release Version 2.2.0
1401 kes Apply a second doc patch from Marc.
1402 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1403 improves the tips section that discusses how to setup multiple
1406 kes Update bat README file.
1407 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1408 corrects a typo in the Recycle status check in db_find_next_volume().
1409 This will probably fix a number of annoying problems with multiple
1411 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1412 bnet calls -- no functionality change.
1414 kes Modify the Verify output to specify if files are missing on
1415 the Volume(s) or disk. Fixes confusion in bug #916.
1416 kes When more than one Volume is read in a migration job, the last
1417 Volume bytes reported are from the last read volume rather than
1418 the last written volume. Fixed. This fixes bug #910.
1419 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1420 It previously printed New Recyle flag is: no. This fixes bug
1423 kes Correct seg fault when switching tape drives during restore.
1424 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1425 be used until after 2.2.0 release.
1427 kes Remove fnmatch() in SD that permitted wild card specifications.
1428 This fixes bug #914.
1430 kes Fix %g in filename returned by SQL for browse tree reported by
1432 kes Fix configure so that it puts config.out in the cwd rather than
1434 kes Attempt to fix the locking problem reported by Eric in bug #906.
1435 kes Make berrno class to leave errno unchanged after constructor call.
1436 kes Make bnet_server use the heap rather than the stack to allocate
1437 its socket fd pointers to avoid a crash at termination. Problem
1438 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1440 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1441 and putting it in depkgs-qt along with Qt4.3.
1443 kes Rework code in acquire.c that switches drives for reading when
1444 the Media Type does not match. This should fix bug #906
1446 ebl Fix a director segfault during job setup #907
1447 kes Correct seg fault in postgresql when first operation returns no
1448 rows. Fixes Dirks File browser problem seg fault with bat.
1450 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1451 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1454 kes Implement PopUp YES/NO dialog for bat.
1456 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1458 kes Correct RunScript to terminate job in FD on failure.
1459 kes Change abort_on_error and AbortJobOnError to fail_on_error
1460 and FailJobOnError in RunScripts.
1461 kes Minor tweaks of code formating in RunScripts, principally to
1462 avoid depassing 80 columns.
1464 kes Eliminate one #ifdef Win32 in bsmtp
1465 kes Implement grow tool to grow a file for testing very large databases.
1466 kes Add big-vol-test to test Bacula seeking with > 5GB.
1469 kes Modify find_next_volume() to return all values in Media record.
1470 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1474 kes Update Release notes
1476 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1477 Warning, in previous beta version, all media get from scratch keep their
1480 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1481 This should fix bug #842. Made a note to look at removing the temp
1482 files at the end of the install.
1483 kes Add ability to mount and unmount a file device providing it is
1484 marked as being removable and has the appropriate mount and unmount
1485 commands defined in the Device resource. This fixes bug #830.
1486 kes When applying a storage override, release all previous storage
1487 definitions rather than just prepending the new storage.
1488 This should prevent a good deal of confusion.
1490 kes Implement ./configure search for qwt libraries.
1492 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1493 Win32 FD. This should fix bug #893.
1494 kes Remove an unnecessary beep in Win32 init code.
1495 kes Update copyright dates in Win32 executable about boxes.
1496 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1497 code with a BSD getopt.c and getopt.h.
1498 kes Remove sched.h from the Win32 compat directory -- not used.
1499 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1500 need to shut it down, do it through the services panel or the command
1502 kes Remove some inappropriate Bacula FSFE copyrights.
1503 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1504 kes Fix regress config non-portable test as pointed out by
1505 Florian Heigl <florian.heigl@gmail.com>
1506 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1507 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1509 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1510 Reported by Frank Sweetser.
1514 kes Fix client-only build.
1515 kes Integrate client-only fixes for bsys (initgroups) and conio from
1516 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1517 kes Make arguments to get_scratch_volume() in same order as other
1519 kes Rework the prune_volumes() subroutine so that after purging and
1520 no volume found in desired pool, it will check for a scratch
1521 volume. This prevents recycling the whole scratch pool.
1522 kes Add code to status storage to print boffset_t (largefile support).
1524 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1525 kes You now need a --with-qwt=<dir> to be able to build bat.
1526 kes Update src/win32/cats/bacula_cats.def to include the new
1527 db_get_query_dbids() call on Win32.
1529 kes Correct a problem when selecting a scratch volume and moving
1530 it to another pool that lost some columns.
1531 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1532 kes Enhance Autochanger error messages to include Volume and device name.
1533 kes Rework prune_volumes() code to take account of InChanger flag,
1534 and to handle recycling volumes going to the Scratch pool and
1535 current pool because the RecyclePool directive.
1536 kes Implement a better and more efficient db_get_query_dbids() to
1537 handle creating and passing back a list of DBIds.
1541 kes Start work on new more efficient DBId subroutine. First use
1542 will be for recycling volume to Scratch inchanger.
1543 kes Increase number of JobIds in pruning from 1000 to 10000.
1544 This to be replaced by above routine.
1545 kes Begin implementation of building Qt4 on Win32.
1546 kes Correct typo in fix I added for bad TLS shutdown.
1547 kes Pull 2.0.3 patches into patches directory.
1548 kes Update Release notes. Include qt-console in line count.
1549 kes Update Projects file.
1551 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1552 bug in migration code where a job that spanned two volumes
1555 kes Implement new BST_DESPOOLING blocked state. Change from locking
1556 during despooling in SD to blocking. This means that other threads
1557 can work with the device structure, in particular the reservations
1558 system while despooling.
1560 kes Fix return in reservation message queue that missed clearing
1561 the jcr lock (implemented 26Jun07 below).
1562 kes Rename a number of dev methods to make locking function names
1564 kes Document locking in lock.c. Move lock structures to new file
1567 kes Move reservations message lock to lock jcr only this
1569 kes Move main SD locking code into lock.c (new file).
1570 kes Update Win32 build to include lock.c
1574 kes Dirk committed the qwt library code for drawing graphs in bat.
1575 kes Tweak install of qwt so that it is integrated with ./configure.
1577 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1578 out by Eric (my typo).
1579 ebl Fix configure.in to get batch mode enable
1580 kes Return correct string from authenticate.cpp in bat when connecting
1582 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1583 spurious line drops when using TLS.
1584 kes Do not file reparse points when restoring a file that already
1587 kes Implement Windows reparse points -- similar to directories, but
1588 we do not descend into it. This is a first cut. They seem to
1589 be backed up, but restore is not yet tested.
1590 kes Remove restore_blocking in tls code when shutting a socket to leave
1591 it in blocking mode. Hopefully this will fix the encryption bug
1592 reported by Frank Sweetser.
1593 kes When opening a file for backup, tell the OS that we are going to
1594 read it sequentially -- optimization.
1595 kes Change variable names in authenticate_director() to not conflict
1596 with member names in bat. Caused great confusion with compiler,
1599 kes Queue openssl error messages in case of comm problem.
1600 kes Do shutdown() call if socket terminated.
1601 kes Remove some duplicated code in tls.c
1602 kes Move more of the bsock member variables into private and access
1604 kes Add Frank Sweetser's tls-test to the regression suite.
1606 kes Add Swedish sv.po file
1608 kes Don't print clock skew message in FD if less than 3 seconds diff.
1609 kes Add a bit of VSS info to status client.
1610 kes Implement a first cut of Vista VSS, using Win2003 code.
1612 Release: 2.1.20 beta
1614 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1615 loaded tape but uses first drive).
1616 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1617 This was indeed a Win32 issue.
1619 kes Simplify search of autochanger for in-use Volume.
1620 kes Fix exit condition of check for in-use volume. kes Remove
1621 inappropriate my_postgresql_free_result() in db_close()
1623 kes Fix bad return in FD when encryption signature not found.
1624 Probably caused a crash.
1625 kes Inhibit missing encryption signature error messages for
1626 file types where no signature computed.
1627 kes Correct inverted check on autochanger in reservation system.
1628 kes Tweak debug code in autochanger reservation.
1630 kes Add some additional locking in the cats directory in subroutines
1631 that modify packet variables called from batch insert.
1632 kes Rework how dcrs are allocated. new_dcr() can now be called
1633 with an existing pointer, and it will simply clean it up.
1634 This allows the reservation system to test various different
1635 devices, and will permit easy device changes.
1636 kes A bunch of changes all over to handle new new_dcr() calling
1638 kes Work more on the Volume management in the SD. Remember Volumes
1639 for tape drives and for autochangers (even virtual disk changers).
1640 kes When looking at the Volume list to reserve a drive, handle
1641 autochanger names correctly by interating through the changer
1642 devices. Also call the Director to see if a Volume is suitable
1643 for the current job.
1644 kes Fix some bugs in bscan. Make sure all media records are written.
1645 Make sure that valid JobMedia records are written for disk files.
1646 Previously they were completely wrong.
1647 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1648 that the URLs don't change and so that the developers will all
1649 work off the same copy. Rebuild from scrach.
1650 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1652 Release: 2.1.18 beta
1654 kes Fix seg fault in FD from incorrect digest size.
1655 kes Fix argument to non-OpenSSL crypto.c subroutine.
1657 Release: 2.1.16 beta
1659 kes Remove a few malloc()s from the encryption code.
1660 kes Use the class calls to bsock in filed/backup.c and restore.c in
1661 place of the old bnet_xxx code.
1662 kes Implement code that does an on the fly calculation of the
1663 signing digest during restore of encrypted files. It makes
1664 a best guess at the algorithm, and if it is not correct, will
1665 then revert to the old code which reads the file after it is
1667 kes Implement at least one missing crypto stream in stream_to_ascii()
1668 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1669 #877 where a reload with bad syntax causes Dir to exit.
1671 Cut: 2.1.14 beta (not released)
1673 kes Do not free a volume on a tape drive until another volume is
1674 mounted and read, or the autochanger unloads the volume.
1675 This should help the SD re-use volumes that are already mounted,
1676 and should fix bug #886.
1677 kes Apply patch from user brettedgar that allows gnome2-console include
1678 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1679 kes Apply patch from Lucien Weller that fixes day of week calculation
1680 because of DST flag problem. Fixes bug #887.
1682 kes Move find_next_appendable_volume() to after acquiring a valid device
1683 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1685 kes Unable to reproduce bug 872. However added additional testing for
1687 kes Bug #874 resolved by documenting SQLite limitations.
1688 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1689 kes Bug #881 resolved by removing typo in mtx-changer script.
1690 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1691 approval. Added a link to the wiki on the web page, and implemented
1692 a backup from http://paramount.ind.wpi.edu
1694 kes Fix update allfrompool to pass pool name.
1696 kes Convert to pure GPL v2 license.
1697 kes Fix sscanf problems reported by Peter Buschman that caused
1698 a bus error on Solaris.
1699 kes Rework (simplify) the select prompt in bat.
1700 kes Move get_jobid_from_tid() into lib and create a
1702 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1703 should definitely fix the problem of lost error messages in the
1705 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1706 kes Eliminate tcpd.h from the project. Enclose the #include from the
1707 library with extern C ...
1708 kes Add print of signal name when a signal is trapped.
1710 Release: 2.1.12 beta
1712 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1714 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1715 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1716 makes SQLit3 run 30 times faster, though a bit less safe.
1717 kes Implement --with-batch-insert in configure and detection of thread
1718 safe libraries. It is on by default, but turned off if no thread
1719 safe library (e.g. SQLite 2) is available.
1721 kes Fix Bacula PostgreSQL buffer overruns.
1722 kes Do better checking for NULL results returned from PostgreSQL;
1723 implement retry for failed queries; clear results buffer after
1724 failed query. Hopefully this will correct the PostgreSQL failures.
1726 kes Implement algorithm to handle only one appendable volume with
1727 Prefer Mounted Volumes = no.
1728 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1729 returned from a query.
1730 kes Make volume lock recursive.
1731 kes Implement an additional volume reservation algorithm that
1732 starts by considering all reserved volumes then uses the
1733 old brute force algorithm of searching the resources to
1734 find a suitable device.
1735 kes Add new reservations debug code and refine the old code.
1736 kes Update the win32/dll/bacula.defs file.
1738 kes Tweak reservations algorithm to permit a few more cases, i.e.
1739 volume reserved, but on different drive, ...
1740 kes Enhance SD status to include Pool and Media Type for drive in a
1741 more readable format (a bit longer).
1742 kes Fix PostgreSQL double free.
1744 kes Minor refactoring of restore decryption code.
1745 kes Add code to smartall.c to detect double free of a buffer.
1747 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1748 so that bsmtp will create a correct email address (mailbox only).
1749 kes Modify 'memory' command so that the buffers are listed as 'In use'
1750 to avoid confusion with Orphaned buffers.
1751 kes I reworked the OpenSSL include/lib flags to be handled in
1752 the standard Bacula way, which should fix bug #863 concerning
1753 non-standard OpenSSL libraries.
1755 kes Implement Help Browser window for bat.
1756 kes Fix reload bug that reset StorageId to zero.
1758 kes Fix TLS #ifdefing when TLS turned off.
1759 kes Ensure that when labelling a tape with Slot=0 that InChanger
1761 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1763 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1764 add DISTINCT (required by PostgreSQL).
1765 kes Implement BSOCK authenticate_director() method. Eventually will
1766 authenicate all daemons.
1767 kes Move several more functions into the BSOCK class.
1769 kes Add code to tell the OS that we no longer need a cached
1770 file that we were reading. In findlib/bfile.c. Also,
1771 only cache files that we are reading. Thanks to
1772 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1773 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1774 kes Implement script to automatically generate cats and dll .def
1775 files for Win32 dll.
1776 kes Update README.mingw32 to include new .def file generation.
1777 kes Correct typo in UTF-8 error message as reported by:
1778 jhernandez <julianhernandez@gmail.com>
1779 kes Add additional sm_check() code on debug level 1.
1780 kes Set default debug level to 1.
1781 kes Trap SIGABRT in attempt to get traceback.
1783 kes Reduce bat connect timeout from 30 to 15 seconds.
1784 kes More restructuring and implementing BSOCK class in place of
1786 kes Remove a few unnecessary malloc() tests in crypto code.
1787 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1788 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1789 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1791 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1793 kes Fix Verify InitCatalog. The attributes were not pointing to the
1794 correct saved location.
1795 kes Implement message callback so that GUI is sure to get all
1796 daemon messages. Currently displayed in a dialog in bat.
1797 kes Ignore SIGUSR2 (Bacula timer) in bat.
1798 kes Apply regress patch from bug #859 to allow regress to work
1799 with Solaris compiler.
1801 kes Begin adding TLS support to bat.
1802 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1803 clean up lex.c and make it more readable.
1805 kes Move more bnet functions into the BSOCK class.
1806 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1807 kes Complete change of berrno strerror() method to bstrerror()
1809 Release: 2.1.10 beta
1811 kes Cleanup incorrect email addresses in bsmtp.
1812 kes Make bat display initial messages rather than discard them.
1814 kes First cut of adding .mod to the run command.
1815 kes Implement auto display of messages in bat.
1816 kes Enhanced preferences to allow all Bacula output to be
1819 kes Try to make bsmtp date routines more generic.
1820 kes Fixed bug #856 autochanger documentation.
1821 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1822 kes Add new cats entry point so Win32 builds.
1824 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1826 kes Do better checking for the MySQL 64 bit libraries looking for both
1827 .a and .so libraries.
1828 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1829 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1830 kes Require the thread safe version of MySQL during configure. Thanks
1831 to Andre Noll for pointing this out.
1832 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1833 continuing in migration code.
1834 kes Apply implementation of tray-monitor font derived from gnome-console
1835 submitted by Andreas Piesk <a.piesk@gmx.net>
1837 kes Eliminate important memory loss in SQLite
1838 kes Fixed the batch insert MySQL thread specific data that was not
1839 being freed. See cats/mysql.c:db_thread_cleanup().
1840 kes Fix restore before command.
1841 kes Convert old hdr.name to name() in a few places.
1842 kes Implement update jobid command.
1843 kes Return all time_t dates in db_get_job_record()
1844 kes Stop watchdog in SD earlier.
1845 kes Put Pool just after Storage in please mount message.
1846 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1849 kes Update the po files.
1850 kes Fix Verify InitCatalog by making it cache attributes.
1852 kes Change name bacula-bat to bat for man 1 page to correspond to
1854 kes Check for client and store NULL pointers in status command. This
1856 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1857 kes Fix sign extended editing of %p.
1858 kes Clean out a little old #ifdefing in cats/mysql.c
1860 kes If time diff between DIR and FD is more than 600 seconds convert
1861 INFO message to WARNING.
1862 kes Implement heap size display in status for all daemons.
1863 kes Attempt to fix MySQL db open memory loss (not successfull).
1864 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1865 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1866 Query. This looks like a MySQL but but by doing extra releases,
1867 the memory goes away. This should fix bug #847.
1869 kes When backup fails, cancel SD before waiting for sd termination.
1870 kes If SD is waiting for FD to connect during cancel, wake up the
1872 kes Fix fsf code so that errno is correctly reported.
1873 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1875 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1876 so that Bacula doesn't later stumble into a seg fault.
1877 kes Use the term Restore Client in the restore Job report.
1878 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1879 the original job's FileSetId.
1880 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1881 spooling in migration jobs. Not yet tested.
1882 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1883 reading conf file from a pipe. However, do it with open_bpipe()
1884 rather than popen. Not yet tested.
1886 kes Fix an ugly bug where the VolCatBytes were getting updated
1888 kes Implement bconsole memory command that prints current memory
1889 usage, plus smartalloc dump.
1890 kes Clarify some error messages in backup, admin, and migrate.
1891 kes Shrink label dialog to smaller size.
1892 kes Invert Cancel OK buttons on restore to be OK Cancel.
1893 kes More strerror() to bstrerror() conversions.
1895 kes Start implementing bstrerror() in place of strerror().
1896 kes Stripping path -- seems to work.
1898 kes Prevent door and port files from being restored (mostly
1900 kes Free an unreleased buffer in compat code.
1901 kes Change console Job name from *Console* to -Console- to eliminate
1902 Win32 filename problems. Put Win32 path separator when creating
1903 Console file. This fixes bug #846.
1904 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1906 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1908 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1909 to force Win32 error message.
1911 kes First cut strip path. The data should be passed to the FD,
1912 but nothing is done with it yet.
1913 kes Enhance the digest and signature routines in the crypto
1914 library to accept a JCR and to use it to print error messages
1915 so that they will go in the Job report rather than the daemon's
1917 kes Simplify some of the verify signature code.
1918 kes Simplify a few of the alternative returns in the signature
1921 ebl Use only POSIX regex instead of GNU regex in breg.c for
1922 File relocation. It fix broken freebsd compilation.
1923 kes Convert all other Dir files to use new ua class message
1925 kes Tentative fix for missing digest signature in bug 807.
1926 kes Correct handle problem in new win32_ftruncate routine.
1927 kes Convert ua_purge.c and ua_update.c to use new ua class
1928 message routines for bat.
1930 kes Correct incorrect installation of LICENSE in Win32 installer.
1931 kes Display LICENSE at the beginning of the Win32 install.
1932 kes Attempt to correct the need for the png files to be installed
1934 kes Reapply my bat.conf install script in qt-console. I think I
1935 editted bat.pro instead of bat.pro.in and it was lost.
1936 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1937 the /var/lock/subsys for subsysdir. Also corrects typos in the
1940 kes First cut update job.
1941 kes Correct configure to include qmake of src/qt-console directory.
1943 kes Make restore job yes/mod/no print in one command so GUI works.
1944 kes First cut implementing backup and restore client.
1945 kes Correct editing in Verify output that caused a seg fault.
1947 kes Insure that bat.conf is not overwritten during installation.
1948 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1949 while I was implementing migration in March 2006 !
1951 ebl Cleanup file relocation, using char *RegexWhere instead of
1952 char *where + bool where_use_regexp
1953 kes Update some manpages and add bat manpage.
1954 kes Make a first cut at converting bacula.spec.in for bwx-console
1956 kes Apply patch from John Goerzen to add hostname as fourth argument
1957 to make_catalog_backup script.
1958 kes Fix typos I introduced into bsmtp.c
1959 kes Make pm_strxxx() routines handle input of NULL pointer. This
1960 is to protect from NULL pointers returned from SQL databases.
1961 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1962 kes Add more debug to FIFO code -- fix fifo regression test.
1964 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1965 kes Add thread timer to bnet_connect() to break from OS if wait time
1968 kes Update Win32 build to include new files, new symbols, and
1970 kes Implement socket level heartbeat (tcp_keepidle)
1971 ebl Commit File relocation patch
1972 kes Make bat have 'make install' target.
1973 kes Warn during install if old gnome-console binary found.
1974 kes Warn during install if old wx-console binary found.
1975 kes Add -8 option to bsmtp command line to add content type utf-8.
1976 Fixes bug #809. (Character coding problem in bsmtp).
1977 kes If < is found in target (from, to, cc) then do not enclose the
1978 target in < > in bsmtp. Fixes bug #772 (malformed address).
1979 kes When printing certain items in dbcheck, stop after 300000.
1980 Fixes bug #822. (dbcheck loops).
1981 kes Incorrect status in Dir after waiting for mount with poll set.
1984 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1986 kes Print waiting to reserve a device every 5 mins.
1988 kes Don't call close_part in label.c if tape and relabel.
1989 kes Don't free volume if busy in close() -- should help with
1991 ebl Fix #824 RunScript bug (After script could be execute twice)
1992 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1993 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1994 Add a regression script to test RunScript
1996 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1999 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
2000 deprecated. No additional bugs will be fixed, and they will be dropped
2001 in a future release (probably 2.4.0).
2002 kes Change name of wx-console to bwx-console to make it more Bacula
2004 kes Change the name of gnome-console to bgnome-console to make it
2007 kes Some time in March, a Feature Request with patch from Jorj Bauer
2008 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
2010 The ability for the director to validate a Client (FD) CN against
2011 an arbitrary set of patterns rather than the hostname, with
2012 A new 'TLS Allowed CN' set of directives which are implemented
2013 in the Client resource. Then pattern matching is used in place
2014 of hostname matching against the Certificate's CN. As an example, we
2015 have certificates which (a) use a local CA, and (b) have a CN of the
2017 kes Add new/changed entry points to Win32 build
2018 kes Create unaccepted-projects for projects that are not accepted.
2019 kes Simplify locking in the reservations system.
2020 kes Add more debug code in reservations.
2021 kes Make sure error condition on reserving a volume is handled correctly.
2022 kes Correct handling of volume_in_use.
2023 kes Correct handling of initializing a device.
2024 kes Move handling of broadcasting releasing a device into release_device().
2025 kes Correct attaching dcr to dev so that it is only done if device
2026 is properly initiated.
2028 kes Locking debug level tweaks in SD.
2029 kes Tweak new Volume code.
2031 kes Add exec external-command [wait-seconds] to bconsole. This
2032 executes the external-command. Note! normally external-command
2033 should be enclosed in double quotes.
2034 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
2035 it should normally be off in a production system.
2037 kes Implement die command for SD so that we can force it to dump.
2038 kes Implement SD lock debug code.
2039 kes Implement new algorithm for keeping Volume list in SD. It
2040 is now owned by the device.
2042 kes Implement new code for freeing in use volumes that should
2043 resolve if not all, some of the problems of multiple drive
2044 tape conflicts described in bug 801.
2046 kes Fix gui/bacula-web/images files in svn.
2047 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
2049 ebl Fix a bug in batch mode (in string escape)
2050 kes Correct migration prune SQL typo that crept in in a
2051 recent 2.1.x change.
2053 kes Move bnet_despool() into class in bsock.c
2054 kes Modify job report to include director name and Build OS.
2055 kes Move drop root privilege and check_catalog() before fork.
2056 kes Add update database scripts (version 9 to 10) to updatedb directory.
2058 ebl Check size and age of each file after its backup to see if
2059 it has changed during backup, if 'checkfilechanges' is set.
2060 The FD will do an extra check (stat(2)) after
2061 each file backup. mtime, ctime and size are compared with
2062 'before backup' information. If time or size mismatch, an
2063 error message will be generated. You must upgrade FD to use it.
2065 kes Make database name and user configurable
2066 --with-db-name=xxx --with-db-user=xxx
2067 kes Add back database type to message.c for debugging.
2069 kes Implement dir_sql() which issues an SQL query.
2070 kes Modify bat medialist to use dir_sql() and do some minor C++
2071 formatting as well as eliminating a number of pointers, simplifing
2074 kes Fix some of the mtx-changer grep commands for tape label readers.
2075 kes Convert a number of bsendmsg into the appropriate send/warning/error
2076 message class calls.
2077 kes Suppress the using database message in the .sql command.
2078 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
2080 kes Add context menu for floating a window.
2081 kes Some minor cleanup and name changes in qt-console
2082 kes Add doing mt setblk 0 in Win32 mtx-changer.
2083 kes Apply Martin's bug fix to move definition of ENODATA for
2085 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
2086 sqlite2 and sqlite3.
2088 kes More pruning cleanup.
2089 kes Turn on wait_for_drive by default in mtx-changer.
2090 kes Turn on Batch insert code by default as it now passes regression.
2091 kes Add ./configure --enable-bat to enable building of Bat.
2092 No install yet though.
2094 kes Implement a new .sql command for bat.
2095 kes Implement code to turn off pruning in obtaining the next volume.
2096 Pruning is turned off for the status dir command, but turned on
2097 for SD requests and for the list nextvolume command.
2099 kes Correct Qmsg() that was not updated correctly when committing a
2100 previous change (probably the recent TLS patch).
2102 kes Write new subroutine is_volume_purged() that explicitly checks
2103 if the Volume is purged, and if so marks it as such. This should
2104 resolve problems reported about needing to mount twice to recycle
2106 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2107 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2108 amount of duplicated code.
2109 kes Do volume pruning only for the Media Type desired (reduces pruning time
2110 if multiple Media Types are in the same pool).
2111 kes Implement more detailed info in the Job report for the Bacula version
2113 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2115 ebl Add bbatch tool to bench database and insert mode.
2116 Fix sql quote stuff in batch mode
2117 Fix sql stuff for mysql
2119 kes Correct problems with am/pm scheduling. Fixes bug #808.
2120 kes Implement new prunning code that prunes up to 1000 jobs at
2121 the same time. The same technique can be applied to a number
2122 of other prune/purge subroutines.
2123 kes Add an insanity check when starting a new tape job to ensure
2124 that the tape position has not been changed. If so fail the
2126 kes Fix Win32 build for dlls to add the folllowing:
2127 src/lib/bsock.c -- new file with new entry points
2128 src/lib/dlist.c -- new entry points
2129 src/cats/sql_create.c -- new entry point
2130 src/cats/sql_cmds.c -- new DATA item exported
2132 ebl batch mode cleanup bscan-test is ok now.
2133 kes Implement SD code to check length of disk volume before appending.
2135 kes Correct return status on db_batch... routines.
2136 kes Add call to db_write_batch_file_records() to migration code.
2137 ebl Fix AfterJob timing
2138 kes Move the checking of the database in initializion of the Director
2139 to after we drop privileges. This avoids the need for both root
2140 and bacula access to the DB.
2141 kes Correct a misplaced variable definition in src/filed/backup.c
2142 kes Correct how the new batch insert db_create_attributes_record()
2143 uses the arguments. Caused a seg fault in bscan.
2144 kes Implement lock() and unlock() methods in DEVICE class.
2145 Implement block() and set_block(xx) methods in DEVICE class.
2146 kes Modify bnet_connect() so that it uses time() to check for the
2147 wait time expiring (on some OSes, some system calls may not
2148 return immediately).
2149 kes Modify Verify to obtain the previous JobId when it is actually
2150 running rather than at schedule time (as it was in 1.38.x).
2151 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2153 kes When checking pid in pid file, continue running if the pid is
2154 the same as ours. This occurs on IRIX after a system crash.
2157 kes Extend new GUI API.
2158 kes Make the ua structure a class, and implement send_msg(),
2159 error_msg(), warning_msg(), and info_msg().
2161 kes Apply fix from for building wx-console on the Mac from
2163 kes Implement new select mechanism for GUI programs.
2164 kes Reorganize initialization of stackedWidgets in bat.
2166 kes Add updated nagios plugin supplied by Christian Masopust.
2168 kes More bat implementation.
2169 kes File migrate bug with Pool Occupancy using mediaid instead
2170 of jobids. Fixes bug #795.
2171 kes Fix orphaned buffers in filed backup and verify due to
2172 crypto buffers not freed during errors. Fixes bug #789.
2173 kes Extend new GUI api code to tree commands.
2174 kes Ensure that tree and dot commands check console ACLs.
2175 kes Permit marking directory with trailing slash.
2176 kes Allow 20 console connections (instead of only 10).
2178 kes Add smartctl call to bacula-sd.conf as an example of getting
2181 kes Modify jobq.c to let simultaneous restore jobs run. This may
2182 cause them to fail if they cannot get a drive.
2183 kes Add Client Connect Wait to Storage daemon to permit users to
2184 modify the time the SD waits for a FD connection.
2186 kes Correct virtual changer check which was backwards. This caused
2187 volumes to be unloaded into slots already occupied.
2189 kes Apply Command ACL filter to JobId list in restore command.
2190 kes Correct typeo in var.c patch.
2192 kes Don't let Bacula prune File or Job records for the current Job.
2193 kes Fix variable substitution pad + inc bug reported (with patch)
2196 kes Correct SQLite log table index as reported by Luca Berra.
2198 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2200 kes Begin implementing new comm signals for API.
2201 kes Fix a few places in lib/message.c where the open fd may
2203 kes Continue implementing lib/bsock.c (real class). Make jcr,
2204 who, host, and port private. There are new methods to access
2205 them for non-class use. This required touching a number of files.
2207 kes Add LANG=C to autoconf/randpass so it works with languages other
2208 than English. Fixes bug #788.
2210 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2212 You will not be able to generate Include/Exclude list any more.
2213 It will be fixed soon.
2214 If you want to use this, you can apply
2215 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2217 kes Restore of sockets created false error messages because Bacula
2218 no longer restores sockets, but the code was still trying to
2219 set the attributes on a non-existent file. Reported by a user.
2220 ebl finish RecyclePool feature
2221 Media will takes Pool.RecyclePool
2222 when moving from Scratch to a Pool or when user will do
2223 update volume=xxx frompool
2224 To use it, add RecyclePool = aPool to your Pool resource
2227 RecyclePool = Scratch
2231 kes Expand new BSOCK class adding signal() and new BNET signals.
2232 kes Begin enhancing the dot commands adding a new API function
2233 that returns more information and will make it easier
2234 to interface to the Director from a program.
2236 kes Make DEVICE fd private. Its new name is m_fd, and can be
2237 obtained with dev->fd() outside the class. This is the
2238 first of many DEVICE members to be made private.
2239 kes Implement Michael Renner's idea on having a virtual disk
2240 changer. I made some minor modifications (e.g. I did not
2241 implement the Virtual Changer directive, but simply set
2242 the Changer Command to an empty string.
2244 kes Implement a BSOCK send() method that writes the whole record
2245 in a single write() request rather than in two.
2246 ebl add update volume=xxx recyclepool=yyyy
2247 volume takes recyclepool from pool when using update volume=xxx from pool
2249 kes Fix encryption deblocking bug, which caused some restored files
2250 to be truncated. This fixes bug #763.
2251 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2252 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2254 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2255 ebl Use btime_t instead of uint64_t in media patch.
2257 kes Optimize the use of the database a bit in the Status dir command.
2258 Only open it when needed, ensure that if any previous database
2259 was opened, it is closed.
2261 kes Correct VolCatBytes bug from media patch.
2262 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2263 in the case of orphaned records.
2264 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2265 and File records in 300K chunks to be more efficient. This
2266 idea came from Juan Luis Frances (if I remember right).
2267 kes Apply Eric's scratch patch that moves a purged Volume to
2268 the RecyclePool. Question: how is RecyclePool set? what
2269 happens to the ScratchPool?
2270 kes Apply Eric's media patch that collects read/write media
2271 times as well as byte counts. This patch requires a
2272 simultaneous upgrade of the DIR and SD. Note, there
2273 should be some way to turn off timing. I'm not sure
2274 times are in Bacula units.
2275 kes Apply Eric's batch-insert patch.
2277 kes Update projects list.
2279 kes Implement Include/Exclude file lists in FD as dlists using
2280 the new dlistString class. This permits efficiently having
2281 large include/exclude lists and completes project Item 25.
2282 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2283 console is authorized to cancel the job. This fixes bug
2285 kes Modify SD so that the VolCatJobs medium record is updated
2286 at the beginning of a Job rather than the end. This
2287 fixes bug #775 where exceeding MaxVolJobs caused jobs
2289 kes Added a mutex around getting and setting Volume information
2290 so that multiple simultaneous jobs will single thread.
2292 Switch to using Subversion
2293 kes Remove src/pygtk-console/ from configure
2295 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2296 plus the entrypoints.
2297 kes Apply patch supplied that corrects debug print
2298 in canceling jobs for max run time. Supplied as
2299 part of bug #621, which was previously fixed.
2301 kes Test on job_canceled() and sd_msg_thread_done inside
2302 loop starting the message thread to avoid a race condition.
2304 kes Remove rl_catch_signal from console.c as it conflicted
2305 with the header definition. Fixes bug #765.
2306 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2308 kes Clarify some stored/acquire messages to indicate if the
2309 problem is with read or append.
2311 kes Fix memory leak with storage ids in cats/sql_get.c
2312 kes Terminate watchdog earlier to avoid reference to released
2313 memory -- reported by Jason Austin.
2314 kes Move closing the database from jobq.c to the director daemon
2315 termination routine. This fixes memory leaks for shadow jobs
2316 (i.e. migration jobs).
2317 kes Free up the unique jobid chain items in migrate.c. This fixes
2318 a memory leak problem.
2319 kes Convert some ugly looking for statements to use foreach_alist
2320 in findlib/find.c. This will facilitate converting the structures
2321 to use dlist (for large include/exclude lists).
2322 kes Fix a bug in the btree.c and btree.h routines, then rename them
2323 rblist and add them to be built in src/lib. Include some new
2324 methods written by Rudolf Cejka that make the code more readable
2325 (hides some of the ugly casting).
2326 kes Add set_next() and set_prev() methods which make the code much more
2327 readable. Also add a new dlistString class that facilitates storing
2328 strings in dlists. To be used in the large include/exclude lists.
2329 kes Make some trivial modifications to lib/tree.h that use rblist
2330 rather than dlist for storing the tree links. This was suggested
2331 by Rudolf Cejka. The result of this is that the restore tree now
2332 uses red-black binary trees rather than simple linked lists. This
2333 should give rather dramatic speed improvements for directories
2334 contining large numbers of directories/files (more than 10000).
2336 kes Fix maxruntime bug #621.
2338 ebl Implement the include JobID in spool file name project.
2339 kes Reorder projects file in order determined by Jan 2007 vote.
2340 kes Implement item #12 on project list -- quick release of FD by
2342 kes Fix open of SQLite3 db where user does not have write permission
2343 so that DIR does not crash. Fixes bug #761.
2345 kes Add back missing @ in Win32 Makefile.
2346 kes Change 'Device not configured to autolabel' from INFO
2348 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2349 which should restart an indefinite # of times.
2350 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2351 other DIR specifications.
2353 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2354 Fix path quoting in SQLite scripts.
2355 Fix problems with SHGetFolderPath.
2357 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2359 kes Fix Job restart on error bug that promotes an Inc to a Full
2360 backup. This should fix bug #755.
2361 kes Add qt-console and first cut of code.
2365 kes Fix Bacula->Documentation link on Win32 to point to index.html
2366 instead of bacula.html. Fixed bug #750.
2367 kes Return JobId in db_get_job_record() when JobId==0. This should
2369 kes Do not release source pointers when restarting a failed job.
2371 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2372 This *should* fix bug #747.
2373 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2376 kes Modify USTORE constructor to set an empty store_source string,
2377 and don't copy the store_source string in a cancel. Hopefully
2378 this will fix Arno's seg fault, bug #744.
2379 kes Add back code to disable conio in configure. Fixes bug #743.
2380 kes Correct the Options scanner in the FD to correctly handle
2381 SHA1 option, which was eating the next option. Reported by
2383 kes Add code to indicate when the SD is spooling, spool wait, and
2384 despooling as requested by Alan Brown.
2386 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob