1 Technical notes on version 2.5
6 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
7 examples/database/dbcheck.sql
10 dbdriver in bacula-dir.conf
12 enhancement to wait command: wait mount ...
17 filepattern (restore with regex in bsr)
20 remove reader/writer in FOPTS????
22 ================== Warning !!!!!! ==========================
23 This BETA release of Bacula 2.5.x development code uses libtool
24 to generate the Bacula libraries as shared objects rather than
25 being directly linked in as in prior versions. This means that
26 the Bacula shared objects, must either be in a shared object
27 directory known to the loader or they must be in the directory
28 that may be specified on the ./configure line using the
31 ./configure --libdir=/full-path/dir
33 the default /usr/lib. If --libdir is specified, there should be
34 no need to modify your loader configuration provided that
35 the shared objects are installed in that directory (Bacula
36 does this with the make install command). The shared objects
37 that Bacula references are:
44 If you have problems with libtool or you wish to use the old
45 way of building static libraries, you can do so by disabling
46 libtool on the configure command line with:
48 ./configure --disable-libtool
49 ==============================================================
53 Beta version 2.5.16 release:
55 ebl Rename JobStat table to JobHistory
57 kes Add Makefile dependency when using LIBTOOL_LINK so that any
58 change in ./configure options will be accounted for.
60 kes Fix typo in the ACL patch that I overlooked.
61 kes Apply Marco's libtool include patch.
63 kes Apply Bastian Friedrich's ACL patch to eliminate ACL
64 errors during restore.
65 kes Minor cleanup of create_restore_volume_list() code.
66 kes Fix typo in console Makefile.in
68 ebl Fix #1110 about RunScript that can't execute a script with
69 Unicode caracters in the path.
71 kes Apply tray-monitor patch from Bastian Friedrich to make it
74 kes Apply cleanup patch from Marco
75 kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
76 that implements libtool to create shared objects out of
78 kes Fix tray-monitor so it will speak to new FD.
79 ebl Fix bug with ansi label when volume name length < 6
80 ebl Fix segfault in debug level > 50 with btape.
81 ebl Remove warning message in btape when command is empty.
82 kes Fix Win32 build to pull in new BACULA define.
84 kes Change IncludeDir to Exclude Dir Containing.
85 kes Implement code to prohibit ExcludeDirContaining in an
86 Exclude section (same for Plugin and Options). A bit
87 of a kludge with RES_ITEM2 ...
88 ebl Add field to command list to restrict Runscript console
90 ebl Use a separate JCR when running Console command with Runscript.
91 ebl Permit to mark version as Beta in some ouputs
93 kes Add plugin types in jcr.h to reduce need to cast.
94 kes Do better checking of plugin return values.
95 kes Free plugin context after calling pluginFree() as
97 kes Allow plugin to call JobMessage with NULL context.
98 kes Do not add plugin to global list if loadPlugin returns error.
99 kes Rework plugin.h a bit to reduce dependence on Bacula.
101 kes Move generation of bsr file for Virtual Backup to run section
102 so that it is generated just before actually running.
103 Suggested by Graham Keeling.
105 kes Add malloc and free Bacula entry points for plugins. Increment
106 FD plugin interface version. Create a bacula plugin context
107 structure to keep track of whether or not the plugin is disabled.
108 kes Apply FileIndex fix for plugin name stream suggested by James.
109 kes List plugins in FD status report when debug > 0.
111 ebl Add a new VerId variable that is printed in version command.
112 kes Fix migration SQL not to migrate a job that has not terminated.
113 This is a partial fix to bug #1164.
114 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
115 backup start time bug reported by Graham Keeling.
117 ebl Fix possible bug in cancel_job() with job that are not
120 kes Fix bat build for Win32.
122 kes Copy plugin link field into ffpkt.
124 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
125 It provides FileRegex in bsr files and code to collect regex
126 from the user during restore, an Allow Mixed Priorities feature,
127 and documentation for the above.
128 ebl Remove db berkeley from configure process
129 kes Do dirty check on hostname (Linux only) and if not resolvable
130 use localhost as default.
131 kes Increase vtape max block to 20GB.
133 kes Refactor restore code to create a close_previous_stream(). This
134 This may destabilize the source.
135 kes Implement planned startRestoreFile() plugin call.
136 ebl Remove missing Loaded information from status slots storage command.
137 ebl Fix Console command problem that cancels the job
138 kes Add more plugin restore debug code.
140 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
141 kes Rewrite plugin restore interface a bit to correspond to how Bacula
142 creates and writes to the restored file.
143 kes Add some DebugMessage() calls to the bpipe-fd.c program.
145 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
146 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
147 Bat; allow add and delete in place of mark and unmark.
148 kes Another attempt to fix the endRestoreFile plugin bug noted below.
150 kes Apply dbi driver patch from Joao.
151 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
152 Bastien Friedrich reported the bug.
153 kes Create plugin instance only when FD job starts.
154 kes Add new FD plugin event: bEventCancelCommand when
155 a cancel command is issued to the FD.
157 kes Add cmd_plugin flag to jcr so we can globally know if a
158 command plugin is running.
159 kes If command plugin running, do not attempt (for the moment)
160 to get Win32 extended attributes.
161 kes Ensure that proper Win32 flags are set in bfile packet
162 if plugin_bopen() works on Win32.
163 kes Remove generated src/plugins/fd/Makefile
165 kes Implement build and install of bpipe-fd.so plugin.
166 kes Rework the interface that passes packets to the plugin
167 so that the packet is started and ended by the packet size.
168 This allows the driver to do a sanity check.
170 kes Rework the pluginIO Bacula internal code to enable
171 proper handling of Win32 error codes from GetLastError.
172 kes Apply Joao's patch to regress startover_libdbi.
174 ebl Add -B option to dbcheck to get catalog information
175 kes Fix Win32 build to include new library function.
176 kes Remove some old reader/writer code.
177 kes Implement ./configure --with-plugindir=xxx
178 ebl Fix the mysql bug in the new accurate code
179 kes Improve plugin debug. Create plugin test.
180 kes Set main thread specific data to INVALID because it
181 has no jcr. This allows debug output to work correctly.
182 kes Add src/plugins/fd/Makefile to ./configure process.
183 kes Make first cut attempt to correct SQL that computes the current
184 Pool usage. This is to fix bug #1159.
185 kes Do a bunch of plugin cleanups for Win32 and more careful checking
186 of PluginDirectory and whether or not a plugin was found.
188 kes This code should fix the race condition that leads to a Director
189 crash at job end time when the job list is updated. This was reported
191 kes Add more plugin documentation and fix include of config.h for
192 Win32 build (I hope).
194 ebl Revert to htable instead of rblist
195 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
196 tree instead of htable.
197 ebl Use a dedicate DB link to compute and send the accurate list
200 kes Fix compile errors in filed/fd_plugin.c.
202 kes Remove all double quotes from SQLite creating script and
203 replace by single quotes as suggested by John Huttley.
205 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
206 It significantly improves the performance of dbcheck for
208 kes Fix bad debug code call in src/filed/accurate.c
210 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
211 output. Perhaps we really need to implement M_SAVED.
213 kes Fix bug #1156 FD crash during processing of Accurate data.
214 kes Tweaks to htable code to improved debugging and make names
215 a bit more meaningful.
217 ebl Remove time_t from update_stats()
219 kes Modify the license of the example plugin program to allow
220 it to be used by anyone for making a Bacula plugin.
221 kes Make apply_rp_codes() in bpipe-fd.c be static.
223 kes Remove Encryption and Accurate lines in vbackup output -- not used.
224 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
225 kes Add host name to items printed during dump.
226 kes Make Check File Changes default on.
228 kes Set the default FD timeout to 3 minutes (previously 30).
229 kes Apply Bastian Friedrich's weird spelling correction patch.
231 kes Always print Verify hash differences. Rename variable to make the
232 code slightly more readable.
234 kes Correct tests for MaxFullInterval as reported by
235 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
236 kes Fix MaxDiffInterval code as well.
237 kes Enable Win32 plugin load code in lib.
238 kes Make Verify code that computes disk checksums use the same
239 algorithm as backup when dealing with sparse files.
240 kes Attempt to run VSS on any systems newer than Vista -- should
241 make it work on Windows Server 2008.
242 ebl Change the new statistic implementation. Remove the UseStatistic
243 directive and add a 'update stats [days=...]' command. You can
244 now decide when copy job records from Job table to JobStat.
245 Statistics are much more accurate with this.
247 kes Fix SQL case problem that may cause the failure of DiskToCatalog
249 kes First cut adding SD plugins.
251 kes Add Slot if it is non-zero to writing bsr file after a
253 kes Change a number of bnet_fsend() into class method calls.
254 kes Begin audit of diff of 2.4 branch to trunk code.
256 ebl Fix the mysql creation script that double-created an
257 index of the same field on the Media table.
258 Add an index to on VolumeName to the Media table for mysql.
260 kes Another try at fixing Vbackup. It looks much better this time.
261 Disable file index sanity check in FD with value stored in
262 attributes record because with Vbackup the File Index gets
263 changed, but not the attributes record.
264 Enhance some debug code.
265 Fix handling of re-indexing records that are copied in Vbackup.
267 kes Made level_to_str() know about Virtual backup.
268 kes Set correct Virtual backup write pool.
269 kes Fix compile warning in new dbcheck port code.
270 kes Fix migration code broken by previous virtual backup fix.
272 kes Fix problem of Virtual backup not writing a sequential FileIndex.
273 kes Reset Virtual backup time/date to the value from the last backup.
274 kes Ensure that storage name is passed to SD on read.
275 kes Correct a problem with Level and Virtual backup, rework how
276 bsrs are printed in debug to use standard routine.
277 kes Apply patch from Chris in bug #1133 that provides alternate db port
279 ebl Remove catalog dependency from bcopy tool.
280 ebl Modify catalog scripts to have an easier packaging integration,
281 using default variables.
282 Make difference between SQLite3 and SQLite in db_get_type()
284 kes Apply most of changes in a patch from:
285 Michael Stapelberg <michael+bacula@stapelberg.de>
286 that allow the Bacula FD to compile on IRIX 6.5.
288 kes Apply patch from Bastian Friedrich that accepts a yes on a
289 delete volume command line.
290 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
291 job when reading from one autochanger and writing to another.
292 kes Minor tweaks (copyright dates convert to use method instead of bnet).
294 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
295 drives when no tape is mounted.
297 kes Add additional info to some SD messages.
298 kes Add fix supplied by Martin Simmons for turning off EOL character
299 in new console multi-command code.
301 kes Fix a Verify InitCatalog problem where in certain cases
302 a garbage filename may be entered in the verification database. This
305 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
306 sent in by Riyas Yoosuf.
308 kes Fix seg fault in Dir during estimate command with no level value
309 given. This fixes bug #1140.
311 kes Add message to migration job when the target job is already migrated.
312 This closes bug #1129.
315 kes Raise some restore debug levels.
316 kes Replace off_t by boffset_t where ever I found it.
318 kes Define a machine dependent ioctl request type for use with
321 kes When a migration job actually runs, re-check the Job record
322 and skip if the job is already migrated. This should
323 significantly reduce the problems with bug #1129.
325 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
326 turn off glibc checks that prevent getting good dumps.
327 kes Implement console 'wait mount' command. Doesn't yet work.
328 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
329 kes Break the do_swapping into do_unload, do_swapping, and
330 do_load. It is much more logical that way.
331 kes Implement a set_dcr_from_vol subroutine in acquire.c for
332 reading volumes. This allows the dcr to be refreshed after being
333 zapped when the wrong volume is mounted.
334 This should fix bug #1126 -- During multiple tape restore, bacula
335 does not ask for physical tape change, but rereads same tape
337 kes Apply patch submitted for bug #1107 with a small modification.
338 This fixes a bug where bcopy copied too many records.
339 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
340 This fixes bug #1124.
341 kes Make the default bat restore Pool be Any. This fixes bug #1118.
343 kes Remove debug statement that crashes the SD at the end of
344 a tape during restore. Fixes bug #1125.
346 kes Implement Win32 bat changes made to Branch-2.4
348 kes Tweak separator command in console to start disabled and
349 allow defining no separator character. Also make code a
350 bit more fault tolerant.
351 kes Make btraceback write the traceback to the working directory
352 before attempting to mail it.
353 kes Add a RFC to Projects.
355 kes Attempt to implement a kludge to make Qt work with bat
357 kes Setup rstorage correctly. Virtual backups are working.
359 kes Move setting JobLevel and JobType into a method, which should
360 allow completing Virtual Backups.
361 kes Fix verify jobs to work again.
363 kes Virtual Backup tweaks -- it is close to working.
365 kes Ensure that SD tried to mount a volume not in an autochanger
366 at least once before asking for operator intervention.
367 kes Make SD aware of Virtual Backup jobs.
368 kes Add VirtualFull for bat.
369 kes Changes to get read storage correct for Virtual Backup.
371 kes Remove old code from label.c
372 kes Split display_display_info() out of write_bsr_file()
373 kes do_vbackup_init() working -- i.e. bootstrap file built.
374 kes Change Bacula trademark owner from John Walker to Kern Sibbald
375 kes First non-working cut of vbackup
376 kes Correct FD heartbeat code to use volatile variable accessed by
378 kes Zero thread id with memset if on Win32 in case it is a struct.
379 kes If cannot create JobMedia record, continue to try to write eof
380 and clean up in block.c
382 kes Add code to interface OpenSSL to new Win32 pthreads code which
383 used a structure for thread_t.
385 ebl tweak bat for win32 compilation
387 ebl Remove tokyo cabinet from the source
388 ebl Update configure/autoconf to support berkeley DB
389 ebl Add a sort to db_get_file_list() to improve bsr construction time.
391 kes Add a mtx-changer.conf file that is not overwritten during
392 an upgrade. It fully configures the mtx-changer script.
393 kes Clear in-use bit on vol when unused while swapping.
395 kes Remove sleep at end of ./bacula
396 kes Clear hash packet for hardlinked files correctly. This corrects
397 a long standing bug where hardlinked files selected individually
398 would occasionally not be restored.
400 kes Apply Eric's patch to ensure that autoprune does not return
401 a Volume not in the autochanger unless requested to do so.
402 kes Correct bat restore display of multiple drives. This fixes
404 kes Do find_a_volume() each time an unload is done. This
405 fixes the failure of maxvol2-test.
407 kes Add some SD debug code.
408 kes Do find_a_volume() each time an unload is done.
409 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
410 and adds --with-db-port to ./configure.
411 kes Use Qmsg() in job.c watchdog callback.
413 kes Release main control rwlock if ABORTing.
414 kes Make watchdog connect timeout queue messages rather than sending
415 directly to avoid lock conflicts with the real thread.
416 kes Add const char in dbd.c to avoid compiler warnings.
417 kes Fix python compiler string warning. Note, IMO the GNU C++
418 compiler guys have made a *very* bad change to their compiler.
419 They now force all strings to be 'const' unless you explicitly
420 cast them, which is extremely ugly and ruins nice code as well
421 as creates a lot of useless work.
423 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
424 mt. This fixes bug #1116.
425 kes Add const in python files to reduce compiler warnings.
426 This may have to be backed out because of later compiler
428 kes Fix failure of 2drive-concurrent-test. Always read label;
429 clear_unload() only after drive is defined in acquire_for_read().
431 kes Generally clean up the manual tape loading code. The main
432 conceptual change is that when a volume is marked to be unloaded,
433 its volume name is retained, and it is only marked as unloaded
434 when either the autoloader says it is unloaded or another tape
435 is read on that drive.
437 kes Add debug code and refactor subroutine in stored/mount.c
438 kes Fix format problem in bscan output reported in bug #1105.
439 ebl Fix get_next_volume_for_append logic with autochanger
440 - use pruned volumes if found
441 - don't reset the inchanger flag after getting a recycled volume
443 Fix recycle_oldest_purged_volume to take InChanger flag in account
445 ebl Add mmap/unmmap implementation for tokyodbm under win32
447 kes Make first step toward eliminating globals from config
448 scanning. Also should be a workaround for FORTIFY_SOURCE
449 GNU C bug -- fixes bug #1042.
451 kes Apply duplicate job tests to restarted jobs.
452 kes Copy more data when restarting a job so that run
453 overrides are kept. This should fix bug #1094.
455 kes More word alignment cleanup.
456 kes Fix bug where SD did not ask operator if the device could not
457 be opened. Reported by Eric.
459 kes Add dbuser to DIR conf file (replaces user).
460 kes Add --with-db-password to ./configure
461 kes Fix regress to handle db_password.
462 ebl Add new 'status storage slots' that list autochanger
464 ebl Update vtape driver to compile only under Linux.
465 ebl Fix a bug when restoring with a wrong mediatype.
467 kes Eliminate ints from conf files and structures to avoid
468 word alignment problems
470 kes Fix bug reported by Scott Barninger where the bacula script
471 refers to scripts in the wrong directory. Needed to meet the
472 requirements of recent FHS location changes.
473 ebl Disable vtape for FreeBSD.
475 ebl Modify disk-changer to check if slot contains something before
478 ebl Fix vtape on win32 and debian.
479 ebl Fix autoselect patch (cause segfault).
481 ebl Fix autoselect option broken for a while. Fix #1089. Need some
482 work with StorageId to be able to use a particular drive in a
485 ebl Rename vtape to vtape.
486 ebl Update vtape driver.
488 ebl Modify vtape driver to avoid sparse file.
489 kes Add make clean of qt-source directory during ./configure
490 kes Store last block number written to tape in DEVICE and
491 use it for testing for correct last block on EOT.
493 Release Version 2.4.0:
497 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
498 This fixes bug #1095.
500 kes Add create_postgresql_database.sql to Win32 installer. Should
501 fix problem reported by Juilio Monteiro.
502 kes Get correct slot when auto unloading a device. This fixes bug
505 kes Fix multiple media restore.
506 kes Make DEVICE Slot private and access it via a method.
507 Allows better control over when it is set and cleared.
508 kes Fix possible seg fault if SQL error.
510 kes Add Martin's fixes to argument scanning for the estimate
511 command. This fixes bug #1093.
512 kes Add debug code to SD.
513 kes Fix renaming a Volume, which used the wrong Volume name.
515 kes If operator has rewind tape, print warning, release tape and
516 try once more. If tape is positioned somewhere, something went
517 wrong, so mark the tape in error and try once more. Previously
518 this error was fatal, now it produces an error message.
519 kes Ensure correct volume name displayed during restore
520 kes Ensure that Volume is mounted for restore.
522 kes Fix a few more Coverity reported problems.
524 kes Apply Allan Black's status dir job count patch.
525 ebl Add information about IMPORT/EXPORT slots in mtx-script.
526 kes Enhance a couple of SD debug messages.
527 kes Tweak unload flag setting and ensure it is set during swap.
529 ebl Fix #1091 about bad output in estimate command.
531 kes Modify autochanger locking to attempt to avoid race
533 kes Make sure device not busy before doing label command.
534 kes Display open() errors except when polling. Previously too
535 many were suppressed. This should fix bug #1070.
536 kes Fix Win32 reparse points. Bacula will not recurse into any
537 reparse point directory, including mount points, unless the
538 directory is explicitly mentioned at the top level (same as
539 with Unix). A file that is linked to another file will be
540 backed up -- much as Unix does for hardlinked files.
541 This fixes bug #1041.
543 kes Remove double quotes from ChangeLog and ReleaseNotes
544 kes Remove StorageId test when pruning and recycling (Eric's changes).
545 kes Remove old form of locking when getting volumes -- causes deadlock.
546 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
547 the name unique and to eliminate compile time error.
548 kes Add accurate.o to Win32 FD Makefile
550 kes Fix cats dll build on Win32 after db_update_job_end_record
551 calling sequence change.
552 ebl Switch to tokyo dbm instead of htable in accurate code
553 ebl Include tokyo dbm to bacula source tree
555 kes Fix buffer overruns detected by Coverity.
557 kes Tweak joblog display.
559 kes Implement --without-qwt
560 kes Fix layout of restore tree dialog
561 kes Add configure bat QWT libraries, so that bat can be built
562 with or without the QWT libaries.
564 ebl Add dummy tape driver for regression tests.
565 kes Make sure we unload the right slot when swapping.
567 kes Add debug times, reduce size of two-pool-changer test
569 ebl Tweak autoconf scripts for vtape
571 kes Improve SD reserve debug code.
572 kes Testing an improvement to free up volumes no longer in use.
574 kes Rework SD acquire for read to handle autochanger Volume
576 kes Implement regression that explicitly tests swapping a Volume
577 from one drive to another.
578 kes Enhance disk-changer to detect most error conditions.
579 kes Fix SD code so that it properly swaps a Volume between drives.
580 This fixes bug #1083.
582 kes Apply libdbi patch from Joao Freitas for regress and for
583 Bacula trunk. Regress now works with libdbi. Nice.
584 kes Apply .nobackup patch from bug #1077 submitted by
586 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
587 name into jobs cloned via the run directive.
589 kes Prevent a Volume that is being swapped from being freed from
590 the volume list. This will most likely fix, at least partially,
592 kes Fix strippath so that it does not get a buffer overrun and crash FD.
593 This fixes bug #1078.
594 kes Remove 50 millisec wait in SD that broke debugger.
595 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
596 that a job may run, counted from when the job was scheduled.
597 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
598 a job may block waiting for a resource, counted from when the job starts
599 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
600 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
601 that implements multiple commands per line in the console when using
602 readline. Modify the default to use a semicolon as the command separator.
604 ebl Fix SQL query in migration code.
605 ebl Make accurate mode with hash disk pass regression tests
607 ebl Implement first cut of accurate backup with hash disk.
609 kes Force unload of volume when wrong volume mounted in SD.
611 kes Fix bat seg fault at termination.
612 kes Add Bacula generated version to bat about box.
615 kes Experiment with allowing multiple read jobs.
616 kes Move final volume swapping code to DCR method and
617 call it from acquire_for_read().
618 kes When wrong volume is mounted during read, unload_autochanger.
620 kes Integrate the libdbi changes from Joao Henrique Freitas
622 kes Stop searching for Volumes in SD askdir if DIR returns the
623 same volume name twice in a row.
624 kes Close bat console windows first to eliminate error message
627 kes Tweak the swap Volume from one drive to another code so that
628 it now seems to work.
629 kes Resolve several problems with recycling that broke the new
630 code (these problems are in 2.2.9 as well).
631 kes Remove the volume lock when calling the sysop code.
632 kes Don't mark a reserved volume with no writers as unused otherwise
635 kes Rework class structures for VOLRES, DCR, and DEVICE to make
636 the method names a bit more logical, and for more logically
637 handling the responsibilities.
639 kes Remove redundant code in terminating the scheduler that just
640 causes a seg fault in many cases.
641 kes Cleanup releasing a volume and make it a DCR method.
642 kes Improve algorithm for detecting pre-reserved volume and
645 kes Tweak volume swapping code so it works.
646 kes Correct name overloading in mount.c
647 kes Replace released flag in VOLRES with reserved and add access
648 methods for the VOLRES class.
649 kes Prevent volume from being released while being swapped.
650 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
651 plugin that add %w (where) and %r (replace flag) editing to
653 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
655 kes Refactor parts of stored/mount.c
657 ebl Add sanity checks for VolWriteTime and VolReadTime
658 ebl Take care of bad clock changes while computing VolWriteTime
659 and VolReadTime. This should fix or limit #1066
660 kes Correct error string numbers in dird/catreq.c
661 kes Restructure reserving, acquiring, and mounting volumes. Calls to
662 autochanger are deferred for mount.c -- simplifes the code.
664 kes Do not prune any running job. It just fails the job.
665 kes Lock the volumes when changing dev->reserved_device and marking
666 the volume unused otherwise the device can get reserved by
667 another job before the volume is released, thus blocking it.
669 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
670 kes Fix bug #1063, reuse of freed ptr in list nextvol.
671 kes Release regex compile buffer in filed/job.c
672 kes Add proper type of const char in sql_create.c
673 kes Turn off debug in daemon termination routines
674 kes Move free_volume_list() before devices are freed in stored.c
675 kes Fix reference to uninitalized stack variables in bregex.c.
676 This should correct bug #1067.
678 kes Fix possible seg fault in SD when freeing a volume entry.
680 kes Implement unload_dev() before swap device.
681 ebl Add statistics prunning with option and menu
682 kes Separate unload_dev() from unload_other_device() in autochanger.c
684 kes Apply patch from bug #1069 that corrects spurious error messages
685 when ACLs enabled on SGI but no ACL exists.
686 ebl Fix small segfault in bacula-sd when debug level is 500
687 kes Modify run_program() and run_program_full_output() to use
688 call by reference for the results string. This corrects a long
689 standing problem where the address of the string may be changed
690 in the subroutine but not in the calling program.
692 kes Re-enable code to remember last volume mounted on a non-tape
694 kes Add patch supplied in bug #1068 that fixes a SD crash when using
695 a Virtual autochanger.
696 kes Generate correct JobMedia records during spooling/despooling when
697 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
698 <tih@hamartun.priv.no> for excellent analysis and testing.
700 kes Tweak hash algorithm for htable using Martin Simmons idea
701 for doing a circular shift.
702 kes Remember what volume is in VTLs (previously turned off for
704 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
705 pointed out some problems in creating JobMedia records during
706 spooling with concurrent jobs. Fix the problem by updating the
707 start file position before despooling and generate a jobmedia
708 record at the end of despooling.
710 kes Fix handling of JobMedia records during spooling and when a
711 Volume is changed without actually writing data to the Volume.
713 kes Rework certain SD locking based on gdb tracebacks of deadlocks
714 sent by Eric. This code now uses only the volume_lock() rather
715 than the reservations lock when at EOM and acquiring a new
717 kes Ensure only one exit point in several subroutines.
719 kes Implement bsock code to permit locking. Use the new code in Verify
720 in the FD to prevent the heartbeat thread from disrupting the Verify
721 data sent to the Dir.
722 kes Modify SD locking to eliminate locking the reservations system from
723 outside the system. Use the volume lock when getting media data
724 and reserving a new volume at end of media.
725 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
726 when SD starts are not locked into place.
728 kes Fix error compiling runscript code on 64 bit machines.
729 kes Tweak Win32 mount point code.
730 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
731 cleared giving bad file estimate).
732 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
735 kes Keep Schedule run lists in order as suggested by
738 kes Implement autostart scripts for Debian.
739 ebl Implement upgrade catalog scripts.
741 ebl Apply jobstat patch for long term statistics. Have to implement
742 purge stats command and upgrade scripts.
743 kes Fix mtx-changer.in for broken Debian mt program.
745 kes Fix large number of JobMedia records reported by Eric Bollengier.
747 kes Apply doc fix from bug #1062.
748 kes Resolve crash and improper restore wx-console Win32 restore
749 GUI. Fixes bug #1065.
750 kes Update Win32 wxWidgets to latest version.
751 kes Attempt to do correct handling of Win32 mount points. Should
753 kes Fix Win32 FD backup/restore memory leak due to improper termination
754 of BackupRead/Write. This fixes bug# 1038.
756 ebl Reduce memory usage for accurate backup, working only with ctime
757 and mtime. (not all Lstat field)
758 About 40MB for my Linux system (400.000 files)
760 kes Add dcr->reserved_volume flag that allows us to release a volume
761 even if it is not vol->released. This allows maxvol2 to work when
762 Volumes expire and we are already writing to the device (i.e. a
763 volume is pulled out from under us by another job terminating after
764 we reserve the drive).
766 ebl Permit multiple command/console per runscript definition.
767 RunScript { command = /bin/true ; command = /bin/false ... }
768 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
769 (restart an application) just after the VSS snapshot on windows.
770 kes Don't zap dcr values during release_volume() as they might
771 have the next Volume to be mounted.
772 kes Fix AIX prototype.
774 kes Second cut of drive switching during backup.
777 kes Update Win32 version of wxWidgets to most recent version.
778 kes Tweak Copy job details.
779 kes Rework dir_find_next_appendable_volume to make a bit more effort
780 to find a suitable volume before giving up.
782 kes Make ask_sysop_to_create... to return if waken from wait.
783 This helps get out of blocked conditions.
784 kes Experimental implementation of switch_device in reservations.
785 kes Implement FD version to allow easier protocol changes.
786 kes Add Plugin Options string -- not yet passed to FD.
787 kes Implement PluginOptions ACL.
789 kes Attempt to correct problems with restores with autochangers and
790 use counts going negative
791 kes Rework SD status command and implement API for bat. Implements
792 header, runing waitreservation, devices, volumes, spooling,
793 and terminated status keywords.
794 .status storage=xxx <keyword>
795 kes Clarify TLS error message by adding double quotes around name.
796 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
797 kes Pass jcr to tls routines so debug messages can be handled better.
798 kes Rework jobq resource allocation code, and possibly fix a bug
799 that caused reference counts to get out of sync.
801 kes Rename fd/dir plugin to use Bacula standard underscore.
802 kes Plugin work -- bring dir up to fd level.
803 kes Start implementation of VTL code
804 kes Fix Win32 build after adding new cats subroutine.
806 kes First cut at Duplicate Job implementation.
808 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
809 kes Start PluginOptions string, and refactor a bit of ua_run.c
810 ebl Apply Allan patch that permit to reset recyclepool.
812 kes Test patch -- possible fix or improvement for bug #1053
813 kes Refactor FD and SD status commands to permit new API code in
814 SD, and to fix Win32 build.
815 kes Win32 build is now working.
817 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
818 some ideas in patch from Scott Bailey.
819 kes Begin implementation of duplicate Job control.
820 kes Fix some of Win32 build after recent additions.
821 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
822 which causes the FD to detect whether or not the OS has the
823 honor no dump bit (*BSD systems), and if so, to skip backing up
824 any file with this bit set. The feature is enabled by setting
825 'honor no dump flag = yes' in the Options section of a FileSet.
827 kes Correct po warning message with datarootdir
828 kes Implement more code in dird.c to put configuration parsing in
829 a class rather than use globals.
830 kes Restructure SD status command for implementation of bat API
833 kes Suppress incorrect 'Will not descend from x into y' messages.
834 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
835 daemon globals used by parser.
836 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
838 kes Fix free of plugin_list when none exists.
840 ebl Apply accurate project patch.
842 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
843 on non-mempool object)
844 kes First cut of converting FD .status to work with bat API.
846 .status client=XXX header
847 .status client=XXX running
848 .status client=XXX terminated
849 kes Implement first cut of Copy Job.
850 kes Implement Catalog in Pool resource. It overrides catalog specified
851 in the Client resource.
853 kes Apply patch (with some difficulties) from Joao Henrique Freitas
854 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
856 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
857 ftruncate() actually works. In the case of some (cheap) NAS devices,
858 it does not, and so recycling NAS Volumes does not work. The code
859 simply unlink()s the file, then recreates it. This fixes bug #1011.
861 kes First incomplete cut of big malloc blocks for htable.
862 kes Tweak plugin code.
864 kes Plugin debug code + tweak a couple bat dialog layouts
866 kes Fix creating first JobMedia record during Migration to include
867 proper index. This caused slow restores of migrated jobs.
868 kes Temp fix to plugin name file_index.
869 kes Bacula backed up and restored a MySQL database.
871 kes Implement plugin restore.
872 kes Implement parsing of db_driver to give db_type index.
874 kes First cut of plugin restore code.
875 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
876 and do not strip paths on symbolic links.
877 kes Set catalog backup database and user name from values specified on
878 the ./configure line.
879 ebl Fix #1031 about wrong pool source information in job report.
882 kes Remove a redundant jcr argument to find_files, match_files, and
884 kes Implement '.status dir header|scheduled|running|terminated' that
885 prints the requested status section. With the exception of the
886 header, the other reports have fields separated by tabs (\t).
888 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
889 a resource embedded run command to find a since time if no explicit
890 since time was supplied on the command line.
891 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
892 that updates the state file at job termination time in addition to
893 when the daemon terminates.
895 kes First version where a plugin did a backup.
896 bpipe-fd.so created a backup file, wrote a test
897 string to it, and Bacua could restore this fabricated file.
899 kes Implement DB Driver = string for the DBI driver.
900 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
901 kes First cut of code for loading Win32 plugin dlls. Implement
902 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
903 and implement a dlfcn.h file based on opengroup's definitions of
906 kes First cut plugin directives.
908 kes Apply patch from bug #1049 to prevent stripping the path on a
910 kes Attempt to fix bug #1047 where stripping a path corrupts the
911 heap. Waiting for feedback.
912 kes Correct the Mount message not to suggest labeling a new tape
913 when doing a restore. Submitted by email by John Stoffel.
914 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
915 FD by using casting. Reported in bug #1042.
917 kes A bit of crypto cleanup. More later.
919 Release Version 2.2.8
921 kes Apply patch from Martin to correct bug #1040, bscan sets existing
923 kes Fixed important spelling error in doc -- bug #1045.
925 ebl Fix bextract to be able to extract non-portable Win32 data to
927 kes Move initialization of read/write res lock earlier in the code.
928 This fixes the crash with a null conf file. This fixes bug
930 kes Redefine CURES in lib/parse_conf to be URES and move it all
931 into lib/parse_conf.c -- this responds to bug #1042, but does
932 not fix it. The fix is not to compile with FORTIFY_SOURCE.
933 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
934 the trunk SVN. I don't think this was reported as a bug.
936 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
938 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
940 kes Add DataDespooling and DataCommitting status (committing is
941 the last despooling).
942 kes Finish implementation of new reservations code noted below.
944 kes Fix bsnprintf for float point numbers. I broke recently when
945 parameterizing some variables. This fixes bug #1036.
946 kes Undo recent reservations changes ... will apply them later
947 when they work better.
949 ebl Fixes #1034 which cause mysql to hang the connection after 8h
950 ebl Change default statistics target of filename.name and path.path
951 fields for PostgreSQL. This speeds lookup by indexes. Thanks
953 kes A few more tweaks to new reservation code. Make sure to clear
954 vol released flag when retaking volume. When reading label and
955 label is bad mark volume unused. When recycling, mark volume
956 unused so it can be renamed.
958 kes Fix reserve_volume() so it doesn't release a volume in use
959 (i.e. a volume entry not marked released). This should be
960 the last part needed to fix bug #1018.
962 kes Move Heartbeat documentation from Job to Director resource.
963 This fixes bug #1033.
965 kes Fix existing switch drive SD code to call autochanger to release
966 any old volume. This must be done to keep the autochanger from
967 releasing subsequently newly reserved volumes in doing a close().
968 This should fix bug #1018.
969 kes Fail if attempting to get console input in batch mode. This
970 should help fail RunScript console commands that are incomplete.
971 kes First cut implementing switch_drive() in SD (not actually called).
973 kes Implement first cut running console commands in a RunScript.
975 ebl Fixes bug #1028 where 'Selection Type' option was not usable
977 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
980 Release Version 2.2.7
982 kes Add new free_tls() entry point so that Win32 builds.
983 kes Fix compile warning in src/lib/util.c
984 kes Fix entry point for edit_job_codes() so that Win32 builds.
985 kes Fix seg fault Frank Sweetser reports in regression testing
986 on his systems. The problem was that the original author of
987 bsnprintf.c did not take into account the side effects of
988 using ++x in the argument to a #define.
989 kes Make SD protocol backward compatible with version 2.2.x.
991 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
992 because Bacula no longer restores sockets.
993 ebl Always use ignorecase fileset option on win32 FD.
995 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
996 that implements double quoting include names in conf files,
997 and also allows piping input by having the first character
998 be a vertical bar (|).
999 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
1000 that implement %f in RunScripts to pass the FileSet name.
1001 kes Skip leading | when lex input comes from a pipe as suggested
1002 by Michael Stapelberg <michael@stapelberg.de>.
1004 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
1005 Nerijus Baliunas <nerijus@users.sourceforge.net>
1007 kes Implement Plugin Directory and plugin events.
1009 kes Implement a security enhancement: TLS authentication but no
1010 encryption. Enabled by setting 'TLS Authentication = yes'.
1011 Note when this is on, TLS encryption is turned OFF!
1013 kes This patch corrects a problem where the maximum concurrent storage
1014 jobs counter gets out of sync during restore jobs causing jobs to
1015 'wait on max Storage jobs'. This patch fixes bug #1009.
1017 kes This patch fixes bcopy so that it produces correct Volumes.
1019 kes This patch eliminates spurious output to the console during a VerifyVolume
1020 job that contains encrypted data. It fixes bug #1024.
1022 kes This patch prevents the 'status dir' command from trying to use a scratch
1023 volume and possibly moving it from one pool to another. This patch fixes
1026 kes Add new include to postgresql.c suggested by Marc Cousins so
1027 that it compiles correctly with pgre version 8.3.
1029 kes Fix --archivedir addition to configure. Replace it with
1030 --with-archivedir in configure.in This fixes the regression
1032 kes This patch fixes bug #1012 where the job is canceled because
1033 of Max Run Time exceeded when the job has not yet started.
1035 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
1036 one 'part' to write. Instead of each part being stored on disk,
1037 written to DVD, then deleted from disk, all parts are written to disk,
1038 and only the last is written and deleted from disk.
1039 kes This patch fixes the status command to include the formating string for
1040 JS_AttrInsterting. It fixes bug #1021.
1041 kes This patch should fix the Mac OS X build problem on the latest
1042 Darwin, where sys/types.h was not included correctly (apparently
1043 due to a change in the Mac headers). The solution was to explicitly
1044 ensure that it is defined for the ./configure.
1045 This patch also has a rebuild of configure that includes the Debian
1046 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
1047 kes This patch should ensure that queued messages to the console are
1048 displayed as soon as possible. It should fix bug 1007, but has been
1049 reported not to work.
1051 kes This patch fixes the infinite loop when trying to increase the
1052 maximum number of volumes in a Pool during the add command.
1053 This patch fixes bug #1008.
1055 Release Version 2.2.6
1057 db Remove extra data on estimate command in joblist for bat.
1059 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1060 really change anything, but is the beginning of doing it *right*.
1061 To do it completely right the LastWritten date must be passed to
1062 the SD, but it is not yet done.
1063 kes Minor tweaks to some bat restore SQL.
1064 kes This patch fixes bug #1003 where putting the message output from
1065 a Verify job into the catalog results in a recursive loop. The problem
1066 seems to show up only with postgresql (to be verified).
1067 kes Correct %x to %p in postgresql debug statement.
1069 kes Fix bug #942 where lots of emails where generated when the heartbeat
1070 interval was low and Bacula wanted a different tape from the one in
1073 ebl Add new SD despooling attributes and Dir inserting attributes
1074 job status codes in the catalog (Status table).
1076 ebl Use qmake-qt4 instead of qmake when available (debian system).
1078 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1079 that passing the password via the command line (arg 3) is insecure.
1080 This responds to bug #990 (it doesn't fix it).
1082 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1083 kes Fix a crash in bat when it cannot connect to the Director for example
1084 if the Director is not running.
1085 kes Remove redundant INDEX (JobId) from File table in the trunk.
1086 This fixes bug #992.
1087 kes Make explicit exception to GPL in LICENSE to permit linking
1088 the Win32 FD with Microsoft VSS code.
1089 kes Apply the Solaris package patch from
1090 Masopust, Christian <christian.masopust@siemens.com>
1091 kes Apply the patch to optionally add a timestamp in the debug output
1092 submitted by Mariusz Czulada <manieq@wp.eu>.
1094 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1095 backend (sql_strerror). Fixes bug #989
1097 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1098 It applied with no problems.
1099 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1100 awk are on the path.
1101 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1102 since the status is returned on stderr on Solaris.
1103 kes Activate Close button on tray-monitor window. This fixes
1105 kes Check for NULL item in parse_conf.c before calling it. In the
1106 case of Device, there is no item and this caused a seg fault when
1107 Device appears in the conf file.
1108 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1109 avoids pulling in config.h multiple times in some new code.
1111 kes Fix spurious warning message printed when creating a volume with
1112 a LabelFormat. This fixes bug #976.
1114 Release Version 2.2.5
1116 kes Add JobId in place of Job name in all the Jmsg() output.
1117 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1119 kes Make maxvol-test and new more strict maxvol2-test work.
1120 kes Print JobId in all Jmsg() job output.
1122 kes Add new SD despooling attributes and Dir inserting attributes
1123 job status codes. This fixes bug 961.
1124 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1126 kes Fix doc issue. This fixes bug #963.
1127 kes Fix listing performance problems in bat. Pointed out by
1129 kes Remove old debug code.
1130 kes Fix bat code that tests for Win32. This should fix bug #968
1131 kes Query 5 list wrong Vol after migration. This fixes bug #960
1133 ebl Fix #969 where user can't change Replace option in restore menu.
1135 kes Save jcr in thread specific data (tsd) for each thread.
1136 kes Make Dmsg() print JobId as -%u.
1137 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1138 for the thread if it exists.
1139 kes Remove old reservation debug jid code.
1140 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1141 ebl Add an option that permit to specify spool size in job
1142 definition. (Applying patches/testing/spoolsize_per_job.patch).
1143 You must upgrade SD and DIR at the same time.
1144 dvl Add new configuration item --archivedir
1145 dvl Adjust regression tests to use tmp not /tmp. This will allow
1146 multiple concurrent runs of the regression tests.
1148 kes Fix race condition that drops final block written to volume.
1149 This happens in rare cases with multiple simultaneous jobs
1150 when the Volume fills. This fixes bug #964. May be related
1151 to bug #935 and possibly #903.
1152 kes Eliminate more strerror() and replace with bstrerror().
1153 kes Remove BSD getopt and replace with unrestricted IBM version.
1154 kes Fix Win32 build for changed calling sequences.
1155 kes More tweaks to the mount volume routines to get everything
1156 right. Changed variable name from find to have_vol, which is
1157 much easier to understand.
1158 kes Enhance btimer debug code.
1160 kes Fix FD->SD authorization failure, which was due to spurious
1161 wakeups from a pthread_cond_timedwait(). Simply check the
1162 predicate before continuing. This fixes bug #953.
1163 kes Add const char where needed (more to do). Remove temp debug code.
1165 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1166 kes Don't overwrite error message in check_tables_version.
1168 kes Unlock batch insert tables with same calls used elsewhere.
1169 kes Allow starting 59 jobs a second.
1170 kes Make SD session key more random.
1171 kes Add retry for SQLite opening db if it fails. Probably helps
1173 kes Suppress extra error messages during batch insert failure.
1175 kes Add jcr to timer packets so if killed message can be sent to job.
1176 kes Add JobId to all Dmsg() output.
1177 kes Put some FD auth code on dbglvl rather than fixed.
1178 kes Return insert attributes error message in db msg buffer to avoid
1179 false error messages. Helps fix bug #966.
1180 kes Separate batch init error messages. Probably helps fix bug #966.
1181 kes Make SD code that contructs attribute insert check string lengths
1183 kes If Dir gets an error during inserting attributes, cancel SD.
1184 This reduces unnecessary error messages.
1186 kes Correct search boolean for getting Volume info
1187 ebl Cleanup batch insert code. Probably fixes bug #965.
1188 kes Back out one small change to the reservation system (reserving a volume).
1189 kes Rework how a Volume is mounted. It is now much more intelligent and
1190 will always attempt to use any mounted volume if possible and reduces
1191 calls to the Director asking about volumes.
1193 kes Turn off some code when batch insert not enabled.
1194 kes Edit FD name in connect error messages.
1195 kes Rework the reservation system to take into account that the Director
1196 might give us a Volume that is different from the current one being
1197 used, and to ensure that we don't exceed Maximum Volume Jobs.
1198 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1199 fatal error with multiple jobs running'
1200 kes Add more debug code in reservation system.
1201 kes Implement maxvol-test to check bug #947.
1203 kes Add code to handle tray monitor separated from Win32 FD.
1204 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1206 kes Add missed return in fixing verify bug -- trunk only.
1207 ebl Fix a command parser issue causing a director segfault.
1208 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1209 This fixes bug #954.
1210 kes Increase the max block size to 4MB fixes bug #957.
1211 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1212 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1213 is not properly mounted (recognized) during a poll.
1214 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1215 Job that has differences reports Verify OK.
1216 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1218 ebl Add an option to operate on all pools with update vol parameters.
1219 This complete the project 20. Patch from Nigel Stepp.
1220 ebl Add history support to bconsole when using readline.
1221 Using Ctrl-D to exit doesn't update .bconsole_history
1222 kes Modify new volume algorithm to use max MediaId for generating next
1223 volume number rather than the count of Volumes. This should essentially
1224 eliminate the failure rate if some volumes were deleted. Bug #921.
1225 kes Begin implemention of Optimize Job Scheduling.
1226 kes Implement restore callback that Dirk and I agreed on for bat
1227 restore. This fixes bug #928. Restore of backup of zero files fails.
1228 kes Fix SQL Catalog logging which broke with new db_escape_string
1231 Release Version 2.2.4
1233 kes Fix bacula_cats.def for new db_escape_string().
1234 kes Increase size of name string when FD making connection to SD.
1235 May fix bug #953. FD->SD connection failure.
1237 kes Add code to help Dan debug 2drive-incremental-2disk test.
1238 kes Add code to try to fix bug #908.
1239 kes Add waits to multiple exit detection code to try to force pid
1240 file to always be deleted.
1241 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1242 This fixes bug #950.
1243 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1244 trying to switch drives by checking for blocking before unblocking.
1246 kes Cancel storage daemon in all cases where FD reports error. This
1247 should fix virtually all cases of bug #920.
1248 kes Fix db_escape_string() for MySQL which did not compile.
1250 kes Fix error message that was clobbered when Dir tells SD it does not
1251 have write permission on Volume. This should fix a minor point
1252 in bug #942, but not the main problem.
1253 kes Add code to cancel job in SD if FD connection fails. This should
1255 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1256 dvl Pass jcr and db into db_escape_string() to enable better escaping
1258 kes Fix migration code to get correct Volume name with multiple volumes
1259 by skipping |. Fixes bug #936.
1260 kes Implement patch supplied by Landon to fix bug #944 where using
1261 TLS with bconsole uses 99+% of the CPU.
1262 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1264 kes Move patches into patches directory.
1266 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1269 ebl Using 'm' in bconsole will show messages like before,
1270 and not memory usage.
1271 kes Fix bug #935, and probably also bug #903 where files were not
1272 restored. MediaId was not properly set in JobMedia record after
1275 kes Suppress chown and chmod error messages if the FD is not running
1278 kes Apply Martin Simmons' patch that should turn off the new API usage
1279 when batch insert is turned off allowing building on older
1281 kes Add ./configure search in qwt-qt4 for qwt package
1283 kes Bacula is now free of 3rd party GPL copyrighted code!
1284 kes Remove idcache.c
1285 kes Add guid_to_name.c/h which replace idcache.
1286 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1288 ebl Detect if new PosgreSQL batch insert API is present.
1289 kes Correct incorrect mempool call causing Director crash. Occurs on
1290 systems without va_copy().
1291 sb Update spec files for 2.2.1 release
1293 kes Fix memory pool call in ua_output.c. bug #934.
1294 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1295 Add test program to fnmatch.c
1297 kes Integrate patch to README.vc8 from
1298 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1299 edit it to get it into Unix patch format.
1300 kes Implement mkpath.c to replace old FSF makepath.c
1302 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1304 Release Version 2.2.1
1306 kes Update POTFILES.in
1307 kes Cleanup a few underquoted AC_DEFUNs in configure
1308 kes Apply patch from Martin Simmons that adds a test for va_copy to
1311 kes Fix bug #921 by increasing the number of tries to create a new volume
1313 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1314 can be called multiple times. Implement a version for machines
1315 without va_copy() that gets a big buffer.
1317 kes Integrate more portable zone offset code into bsmtp.c
1318 Submitted by Attila Fülöp.
1320 kes Fix bad SD->FD return status reported by
1321 (James Harper) <james.harper@bendigoit.com.au>
1322 ebl Fix a bug in read_close_session which return random status
1323 thanks to James Harper
1325 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1326 and directory names during restore of single file/directories.
1327 kes Add sanity checks to .sql command when string is empty. Hopefully
1328 that will resolve Dirks Director crash.
1330 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1331 in the bsmtp chat subroutine when debug is >= 10.
1333 kes Fix Director crash when running bat SQL queries.
1334 kes Add David's notes on Item 8: Copy pools.
1336 kes Rework projects file to be current and ready for a vote.
1337 kes Enhance lex scanner error message.
1339 kes Tweak LICENSE file to mention BSD code.
1340 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1341 if specified on the ./configure.
1342 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1343 This class is intended to allow us to open a second bsock to the
1344 Director while in the restore subdialog.
1346 kes Fix configure to create bat Makefile before creating dependencies.
1347 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1348 kes Add a tooltip to the tray monitor.
1349 dvl Set the Director's PID file before dropping privs. This fixes
1352 kes Update AUTHORs file
1353 kes Increase the default max concurrent jobs to 20 in FD and SD to
1354 correspond with the default .conf files.
1355 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1356 some different, of the same file created by RN when porting the
1358 kes Rearrange some of the Win32 directories and the placement of the files
1360 kes Set DEVELOPER flag in version.h
1362 ========================================================================
1363 Release Version 2.2.0
1365 kes Apply a second doc patch from Marc.
1366 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1367 improves the tips section that discusses how to setup multiple
1370 kes Update bat README file.
1371 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1372 corrects a typo in the Recycle status check in db_find_next_volume().
1373 This will probably fix a number of annoying problems with multiple
1375 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1376 bnet calls -- no functionality change.
1378 kes Modify the Verify output to specify if files are missing on
1379 the Volume(s) or disk. Fixes confusion in bug #916.
1380 kes When more than one Volume is read in a migration job, the last
1381 Volume bytes reported are from the last read volume rather than
1382 the last written volume. Fixed. This fixes bug #910.
1383 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1384 It previously printed New Recyle flag is: no. This fixes bug
1387 kes Correct seg fault when switching tape drives during restore.
1388 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1389 be used until after 2.2.0 release.
1391 kes Remove fnmatch() in SD that permitted wild card specifications.
1392 This fixes bug #914.
1394 kes Fix %g in filename returned by SQL for browse tree reported by
1396 kes Fix configure so that it puts config.out in the cwd rather than
1398 kes Attempt to fix the locking problem reported by Eric in bug #906.
1399 kes Make berrno class to leave errno unchanged after constructor call.
1400 kes Make bnet_server use the heap rather than the stack to allocate
1401 its socket fd pointers to avoid a crash at termination. Problem
1402 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1404 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1405 and putting it in depkgs-qt along with Qt4.3.
1407 kes Rework code in acquire.c that switches drives for reading when
1408 the Media Type does not match. This should fix bug #906
1410 ebl Fix a director segfault during job setup #907
1411 kes Correct seg fault in postgresql when first operation returns no
1412 rows. Fixes Dirks File browser problem seg fault with bat.
1414 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1415 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1418 kes Implement PopUp YES/NO dialog for bat.
1420 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1422 kes Correct RunScript to terminate job in FD on failure.
1423 kes Change abort_on_error and AbortJobOnError to fail_on_error
1424 and FailJobOnError in RunScripts.
1425 kes Minor tweaks of code formating in RunScripts, principally to
1426 avoid depassing 80 columns.
1428 kes Eliminate one #ifdef Win32 in bsmtp
1429 kes Implement grow tool to grow a file for testing very large databases.
1430 kes Add big-vol-test to test Bacula seeking with > 5GB.
1433 kes Modify find_next_volume() to return all values in Media record.
1434 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1438 kes Update Release notes
1440 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1441 Warning, in previous beta version, all media get from scratch keep their
1444 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1445 This should fix bug #842. Made a note to look at removing the temp
1446 files at the end of the install.
1447 kes Add ability to mount and unmount a file device providing it is
1448 marked as being removable and has the appropriate mount and unmount
1449 commands defined in the Device resource. This fixes bug #830.
1450 kes When applying a storage override, release all previous storage
1451 definitions rather than just prepending the new storage.
1452 This should prevent a good deal of confusion.
1454 kes Implement ./configure search for qwt libraries.
1456 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1457 Win32 FD. This should fix bug #893.
1458 kes Remove an unnecessary beep in Win32 init code.
1459 kes Update copyright dates in Win32 executable about boxes.
1460 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1461 code with a BSD getopt.c and getopt.h.
1462 kes Remove sched.h from the Win32 compat directory -- not used.
1463 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1464 need to shut it down, do it through the services panel or the command
1466 kes Remove some inappropriate Bacula FSFE copyrights.
1467 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1468 kes Fix regress config non-portable test as pointed out by
1469 Florian Heigl <florian.heigl@gmail.com>
1470 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1471 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1473 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1474 Reported by Frank Sweetser.
1478 kes Fix client-only build.
1479 kes Integrate client-only fixes for bsys (initgroups) and conio from
1480 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1481 kes Make arguments to get_scratch_volume() in same order as other
1483 kes Rework the prune_volumes() subroutine so that after purging and
1484 no volume found in desired pool, it will check for a scratch
1485 volume. This prevents recycling the whole scratch pool.
1486 kes Add code to status storage to print boffset_t (largefile support).
1488 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1489 kes You now need a --with-qwt=<dir> to be able to build bat.
1490 kes Update src/win32/cats/bacula_cats.def to include the new
1491 db_get_query_dbids() call on Win32.
1493 kes Correct a problem when selecting a scratch volume and moving
1494 it to another pool that lost some columns.
1495 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1496 kes Enhance Autochanger error messages to include Volume and device name.
1497 kes Rework prune_volumes() code to take account of InChanger flag,
1498 and to handle recycling volumes going to the Scratch pool and
1499 current pool because the RecyclePool directive.
1500 kes Implement a better and more efficient db_get_query_dbids() to
1501 handle creating and passing back a list of DBIds.
1505 kes Start work on new more efficient DBId subroutine. First use
1506 will be for recycling volume to Scratch inchanger.
1507 kes Increase number of JobIds in pruning from 1000 to 10000.
1508 This to be replaced by above routine.
1509 kes Begin implementation of building Qt4 on Win32.
1510 kes Correct typo in fix I added for bad TLS shutdown.
1511 kes Pull 2.0.3 patches into patches directory.
1512 kes Update Release notes. Include qt-console in line count.
1513 kes Update Projects file.
1515 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1516 bug in migration code where a job that spanned two volumes
1519 kes Implement new BST_DESPOOLING blocked state. Change from locking
1520 during despooling in SD to blocking. This means that other threads
1521 can work with the device structure, in particular the reservations
1522 system while despooling.
1524 kes Fix return in reservation message queue that missed clearing
1525 the jcr lock (implemented 26Jun07 below).
1526 kes Rename a number of dev methods to make locking function names
1528 kes Document locking in lock.c. Move lock structures to new file
1531 kes Move reservations message lock to lock jcr only this
1533 kes Move main SD locking code into lock.c (new file).
1534 kes Update Win32 build to include lock.c
1538 kes Dirk committed the qwt library code for drawing graphs in bat.
1539 kes Tweak install of qwt so that it is integrated with ./configure.
1541 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1542 out by Eric (my typo).
1543 ebl Fix configure.in to get batch mode enable
1544 kes Return correct string from authenticate.cpp in bat when connecting
1546 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1547 spurious line drops when using TLS.
1548 kes Do not file reparse points when restoring a file that already
1551 kes Implement Windows reparse points -- similar to directories, but
1552 we do not descend into it. This is a first cut. They seem to
1553 be backed up, but restore is not yet tested.
1554 kes Remove restore_blocking in tls code when shutting a socket to leave
1555 it in blocking mode. Hopefully this will fix the encryption bug
1556 reported by Frank Sweetser.
1557 kes When opening a file for backup, tell the OS that we are going to
1558 read it sequentially -- optimization.
1559 kes Change variable names in authenticate_director() to not conflict
1560 with member names in bat. Caused great confusion with compiler,
1563 kes Queue openssl error messages in case of comm problem.
1564 kes Do shutdown() call if socket terminated.
1565 kes Remove some duplicated code in tls.c
1566 kes Move more of the bsock member variables into private and access
1568 kes Add Frank Sweetser's tls-test to the regression suite.
1570 kes Add Swedish sv.po file
1572 kes Don't print clock skew message in FD if less than 3 seconds diff.
1573 kes Add a bit of VSS info to status client.
1574 kes Implement a first cut of Vista VSS, using Win2003 code.
1576 Release: 2.1.20 beta
1578 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1579 loaded tape but uses first drive).
1580 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1581 This was indeed a Win32 issue.
1583 kes Simplify search of autochanger for in-use Volume.
1584 kes Fix exit condition of check for in-use volume. kes Remove
1585 inappropriate my_postgresql_free_result() in db_close()
1587 kes Fix bad return in FD when encryption signature not found.
1588 Probably caused a crash.
1589 kes Inhibit missing encryption signature error messages for
1590 file types where no signature computed.
1591 kes Correct inverted check on autochanger in reservation system.
1592 kes Tweak debug code in autochanger reservation.
1594 kes Add some additional locking in the cats directory in subroutines
1595 that modify packet variables called from batch insert.
1596 kes Rework how dcrs are allocated. new_dcr() can now be called
1597 with an existing pointer, and it will simply clean it up.
1598 This allows the reservation system to test various different
1599 devices, and will permit easy device changes.
1600 kes A bunch of changes all over to handle new new_dcr() calling
1602 kes Work more on the Volume management in the SD. Remember Volumes
1603 for tape drives and for autochangers (even virtual disk changers).
1604 kes When looking at the Volume list to reserve a drive, handle
1605 autochanger names correctly by interating through the changer
1606 devices. Also call the Director to see if a Volume is suitable
1607 for the current job.
1608 kes Fix some bugs in bscan. Make sure all media records are written.
1609 Make sure that valid JobMedia records are written for disk files.
1610 Previously they were completely wrong.
1611 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1612 that the URLs don't change and so that the developers will all
1613 work off the same copy. Rebuild from scrach.
1614 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1616 Release: 2.1.18 beta
1618 kes Fix seg fault in FD from incorrect digest size.
1619 kes Fix argument to non-OpenSSL crypto.c subroutine.
1621 Release: 2.1.16 beta
1623 kes Remove a few malloc()s from the encryption code.
1624 kes Use the class calls to bsock in filed/backup.c and restore.c in
1625 place of the old bnet_xxx code.
1626 kes Implement code that does an on the fly calculation of the
1627 signing digest during restore of encrypted files. It makes
1628 a best guess at the algorithm, and if it is not correct, will
1629 then revert to the old code which reads the file after it is
1631 kes Implement at least one missing crypto stream in stream_to_ascii()
1632 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1633 #877 where a reload with bad syntax causes Dir to exit.
1635 Cut: 2.1.14 beta (not released)
1637 kes Do not free a volume on a tape drive until another volume is
1638 mounted and read, or the autochanger unloads the volume.
1639 This should help the SD re-use volumes that are already mounted,
1640 and should fix bug #886.
1641 kes Apply patch from user brettedgar that allows gnome2-console include
1642 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1643 kes Apply patch from Lucien Weller that fixes day of week calculation
1644 because of DST flag problem. Fixes bug #887.
1646 kes Move find_next_appendable_volume() to after acquiring a valid device
1647 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1649 kes Unable to reproduce bug 872. However added additional testing for
1651 kes Bug #874 resolved by documenting SQLite limitations.
1652 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1653 kes Bug #881 resolved by removing typo in mtx-changer script.
1654 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1655 approval. Added a link to the wiki on the web page, and implemented
1656 a backup from http://paramount.ind.wpi.edu
1658 kes Fix update allfrompool to pass pool name.
1660 kes Convert to pure GPL v2 license.
1661 kes Fix sscanf problems reported by Peter Buschman that caused
1662 a bus error on Solaris.
1663 kes Rework (simplify) the select prompt in bat.
1664 kes Move get_jobid_from_tid() into lib and create a
1666 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1667 should definitely fix the problem of lost error messages in the
1669 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1670 kes Eliminate tcpd.h from the project. Enclose the #include from the
1671 library with extern C ...
1672 kes Add print of signal name when a signal is trapped.
1674 Release: 2.1.12 beta
1676 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1678 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1679 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1680 makes SQLit3 run 30 times faster, though a bit less safe.
1681 kes Implement --with-batch-insert in configure and detection of thread
1682 safe libraries. It is on by default, but turned off if no thread
1683 safe library (e.g. SQLite 2) is available.
1685 kes Fix Bacula PostgreSQL buffer overruns.
1686 kes Do better checking for NULL results returned from PostgreSQL;
1687 implement retry for failed queries; clear results buffer after
1688 failed query. Hopefully this will correct the PostgreSQL failures.
1690 kes Implement algorithm to handle only one appendable volume with
1691 Prefer Mounted Volumes = no.
1692 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1693 returned from a query.
1694 kes Make volume lock recursive.
1695 kes Implement an additional volume reservation algorithm that
1696 starts by considering all reserved volumes then uses the
1697 old brute force algorithm of searching the resources to
1698 find a suitable device.
1699 kes Add new reservations debug code and refine the old code.
1700 kes Update the win32/dll/bacula.defs file.
1702 kes Tweak reservations algorithm to permit a few more cases, i.e.
1703 volume reserved, but on different drive, ...
1704 kes Enhance SD status to include Pool and Media Type for drive in a
1705 more readable format (a bit longer).
1706 kes Fix PostgreSQL double free.
1708 kes Minor refactoring of restore decryption code.
1709 kes Add code to smartall.c to detect double free of a buffer.
1711 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1712 so that bsmtp will create a correct email address (mailbox only).
1713 kes Modify 'memory' command so that the buffers are listed as 'In use'
1714 to avoid confusion with Orphaned buffers.
1715 kes I reworked the OpenSSL include/lib flags to be handled in
1716 the standard Bacula way, which should fix bug #863 concerning
1717 non-standard OpenSSL libraries.
1719 kes Implement Help Browser window for bat.
1720 kes Fix reload bug that reset StorageId to zero.
1722 kes Fix TLS #ifdefing when TLS turned off.
1723 kes Ensure that when labelling a tape with Slot=0 that InChanger
1725 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1727 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1728 add DISTINCT (required by PostgreSQL).
1729 kes Implement BSOCK authenticate_director() method. Eventually will
1730 authenicate all daemons.
1731 kes Move several more functions into the BSOCK class.
1733 kes Add code to tell the OS that we no longer need a cached
1734 file that we were reading. In findlib/bfile.c. Also,
1735 only cache files that we are reading. Thanks to
1736 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1737 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1738 kes Implement script to automatically generate cats and dll .def
1739 files for Win32 dll.
1740 kes Update README.mingw32 to include new .def file generation.
1741 kes Correct typo in UTF-8 error message as reported by:
1742 jhernandez <julianhernandez@gmail.com>
1743 kes Add additional sm_check() code on debug level 1.
1744 kes Set default debug level to 1.
1745 kes Trap SIGABRT in attempt to get traceback.
1747 kes Reduce bat connect timeout from 30 to 15 seconds.
1748 kes More restructuring and implementing BSOCK class in place of
1750 kes Remove a few unnecessary malloc() tests in crypto code.
1751 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1752 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1753 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1755 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1757 kes Fix Verify InitCatalog. The attributes were not pointing to the
1758 correct saved location.
1759 kes Implement message callback so that GUI is sure to get all
1760 daemon messages. Currently displayed in a dialog in bat.
1761 kes Ignore SIGUSR2 (Bacula timer) in bat.
1762 kes Apply regress patch from bug #859 to allow regress to work
1763 with Solaris compiler.
1765 kes Begin adding TLS support to bat.
1766 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1767 clean up lex.c and make it more readable.
1769 kes Move more bnet functions into the BSOCK class.
1770 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1771 kes Complete change of berrno strerror() method to bstrerror()
1773 Release: 2.1.10 beta
1775 kes Cleanup incorrect email addresses in bsmtp.
1776 kes Make bat display initial messages rather than discard them.
1778 kes First cut of adding .mod to the run command.
1779 kes Implement auto display of messages in bat.
1780 kes Enhanced preferences to allow all Bacula output to be
1783 kes Try to make bsmtp date routines more generic.
1784 kes Fixed bug #856 autochanger documentation.
1785 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1786 kes Add new cats entry point so Win32 builds.
1788 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1790 kes Do better checking for the MySQL 64 bit libraries looking for both
1791 .a and .so libraries.
1792 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1793 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1794 kes Require the thread safe version of MySQL during configure. Thanks
1795 to Andre Noll for pointing this out.
1796 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1797 continuing in migration code.
1798 kes Apply implementation of tray-monitor font derived from gnome-console
1799 submitted by Andreas Piesk <a.piesk@gmx.net>
1801 kes Eliminate important memory loss in SQLite
1802 kes Fixed the batch insert MySQL thread specific data that was not
1803 being freed. See cats/mysql.c:db_thread_cleanup().
1804 kes Fix restore before command.
1805 kes Convert old hdr.name to name() in a few places.
1806 kes Implement update jobid command.
1807 kes Return all time_t dates in db_get_job_record()
1808 kes Stop watchdog in SD earlier.
1809 kes Put Pool just after Storage in please mount message.
1810 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1813 kes Update the po files.
1814 kes Fix Verify InitCatalog by making it cache attributes.
1816 kes Change name bacula-bat to bat for man 1 page to correspond to
1818 kes Check for client and store NULL pointers in status command. This
1820 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1821 kes Fix sign extended editing of %p.
1822 kes Clean out a little old #ifdefing in cats/mysql.c
1824 kes If time diff between DIR and FD is more than 600 seconds convert
1825 INFO message to WARNING.
1826 kes Implement heap size display in status for all daemons.
1827 kes Attempt to fix MySQL db open memory loss (not successfull).
1828 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1829 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1830 Query. This looks like a MySQL but but by doing extra releases,
1831 the memory goes away. This should fix bug #847.
1833 kes When backup fails, cancel SD before waiting for sd termination.
1834 kes If SD is waiting for FD to connect during cancel, wake up the
1836 kes Fix fsf code so that errno is correctly reported.
1837 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1839 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1840 so that Bacula doesn't later stumble into a seg fault.
1841 kes Use the term Restore Client in the restore Job report.
1842 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1843 the original job's FileSetId.
1844 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1845 spooling in migration jobs. Not yet tested.
1846 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1847 reading conf file from a pipe. However, do it with open_bpipe()
1848 rather than popen. Not yet tested.
1850 kes Fix an ugly bug where the VolCatBytes were getting updated
1852 kes Implement bconsole memory command that prints current memory
1853 usage, plus smartalloc dump.
1854 kes Clarify some error messages in backup, admin, and migrate.
1855 kes Shrink label dialog to smaller size.
1856 kes Invert Cancel OK buttons on restore to be OK Cancel.
1857 kes More strerror() to bstrerror() conversions.
1859 kes Start implementing bstrerror() in place of strerror().
1860 kes Stripping path -- seems to work.
1862 kes Prevent door and port files from being restored (mostly
1864 kes Free an unreleased buffer in compat code.
1865 kes Change console Job name from *Console* to -Console- to eliminate
1866 Win32 filename problems. Put Win32 path separator when creating
1867 Console file. This fixes bug #846.
1868 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1870 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1872 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1873 to force Win32 error message.
1875 kes First cut strip path. The data should be passed to the FD,
1876 but nothing is done with it yet.
1877 kes Enhance the digest and signature routines in the crypto
1878 library to accept a JCR and to use it to print error messages
1879 so that they will go in the Job report rather than the daemon's
1881 kes Simplify some of the verify signature code.
1882 kes Simplify a few of the alternative returns in the signature
1885 ebl Use only POSIX regex instead of GNU regex in breg.c for
1886 File relocation. It fix broken freebsd compilation.
1887 kes Convert all other Dir files to use new ua class message
1889 kes Tentative fix for missing digest signature in bug 807.
1890 kes Correct handle problem in new win32_ftruncate routine.
1891 kes Convert ua_purge.c and ua_update.c to use new ua class
1892 message routines for bat.
1894 kes Correct incorrect installation of LICENSE in Win32 installer.
1895 kes Display LICENSE at the beginning of the Win32 install.
1896 kes Attempt to correct the need for the png files to be installed
1898 kes Reapply my bat.conf install script in qt-console. I think I
1899 editted bat.pro instead of bat.pro.in and it was lost.
1900 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1901 the /var/lock/subsys for subsysdir. Also corrects typos in the
1904 kes First cut update job.
1905 kes Correct configure to include qmake of src/qt-console directory.
1907 kes Make restore job yes/mod/no print in one command so GUI works.
1908 kes First cut implementing backup and restore client.
1909 kes Correct editing in Verify output that caused a seg fault.
1911 kes Insure that bat.conf is not overwritten during installation.
1912 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1913 while I was implementing migration in March 2006 !
1915 ebl Cleanup file relocation, using char *RegexWhere instead of
1916 char *where + bool where_use_regexp
1917 kes Update some manpages and add bat manpage.
1918 kes Make a first cut at converting bacula.spec.in for bwx-console
1920 kes Apply patch from John Goerzen to add hostname as fourth argument
1921 to make_catalog_backup script.
1922 kes Fix typos I introduced into bsmtp.c
1923 kes Make pm_strxxx() routines handle input of NULL pointer. This
1924 is to protect from NULL pointers returned from SQL databases.
1925 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1926 kes Add more debug to FIFO code -- fix fifo regression test.
1928 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1929 kes Add thread timer to bnet_connect() to break from OS if wait time
1932 kes Update Win32 build to include new files, new symbols, and
1934 kes Implement socket level heartbeat (tcp_keepidle)
1935 ebl Commit File relocation patch
1936 kes Make bat have 'make install' target.
1937 kes Warn during install if old gnome-console binary found.
1938 kes Warn during install if old wx-console binary found.
1939 kes Add -8 option to bsmtp command line to add content type utf-8.
1940 Fixes bug #809. (Character coding problem in bsmtp).
1941 kes If < is found in target (from, to, cc) then do not enclose the
1942 target in < > in bsmtp. Fixes bug #772 (malformed address).
1943 kes When printing certain items in dbcheck, stop after 300000.
1944 Fixes bug #822. (dbcheck loops).
1945 kes Incorrect status in Dir after waiting for mount with poll set.
1948 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1950 kes Print waiting to reserve a device every 5 mins.
1952 kes Don't call close_part in label.c if tape and relabel.
1953 kes Don't free volume if busy in close() -- should help with
1955 ebl Fix #824 RunScript bug (After script could be execute twice)
1956 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1957 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1958 Add a regression script to test RunScript
1960 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1963 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1964 deprecated. No additional bugs will be fixed, and they will be dropped
1965 in a future release (probably 2.4.0).
1966 kes Change name of wx-console to bwx-console to make it more Bacula
1968 kes Change the name of gnome-console to bgnome-console to make it
1971 kes Some time in March, a Feature Request with patch from Jorj Bauer
1972 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1974 The ability for the director to validate a Client (FD) CN against
1975 an arbitrary set of patterns rather than the hostname, with
1976 A new 'TLS Allowed CN' set of directives which are implemented
1977 in the Client resource. Then pattern matching is used in place
1978 of hostname matching against the Certificate's CN. As an example, we
1979 have certificates which (a) use a local CA, and (b) have a CN of the
1981 kes Add new/changed entry points to Win32 build
1982 kes Create unaccepted-projects for projects that are not accepted.
1983 kes Simplify locking in the reservations system.
1984 kes Add more debug code in reservations.
1985 kes Make sure error condition on reserving a volume is handled correctly.
1986 kes Correct handling of volume_in_use.
1987 kes Correct handling of initializing a device.
1988 kes Move handling of broadcasting releasing a device into release_device().
1989 kes Correct attaching dcr to dev so that it is only done if device
1990 is properly initiated.
1992 kes Locking debug level tweaks in SD.
1993 kes Tweak new Volume code.
1995 kes Add exec external-command [wait-seconds] to bconsole. This
1996 executes the external-command. Note! normally external-command
1997 should be enclosed in double quotes.
1998 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1999 it should normally be off in a production system.
2001 kes Implement die command for SD so that we can force it to dump.
2002 kes Implement SD lock debug code.
2003 kes Implement new algorithm for keeping Volume list in SD. It
2004 is now owned by the device.
2006 kes Implement new code for freeing in use volumes that should
2007 resolve if not all, some of the problems of multiple drive
2008 tape conflicts described in bug 801.
2010 kes Fix gui/bacula-web/images files in svn.
2011 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
2013 ebl Fix a bug in batch mode (in string escape)
2014 kes Correct migration prune SQL typo that crept in in a
2015 recent 2.1.x change.
2017 kes Move bnet_despool() into class in bsock.c
2018 kes Modify job report to include director name and Build OS.
2019 kes Move drop root privilege and check_catalog() before fork.
2020 kes Add update database scripts (version 9 to 10) to updatedb directory.
2022 ebl Check size and age of each file after its backup to see if
2023 it has changed during backup, if 'checkfilechanges' is set.
2024 The FD will do an extra check (stat(2)) after
2025 each file backup. mtime, ctime and size are compared with
2026 'before backup' information. If time or size mismatch, an
2027 error message will be generated. You must upgrade FD to use it.
2029 kes Make database name and user configurable
2030 --with-db-name=xxx --with-db-user=xxx
2031 kes Add back database type to message.c for debugging.
2033 kes Implement dir_sql() which issues an SQL query.
2034 kes Modify bat medialist to use dir_sql() and do some minor C++
2035 formatting as well as eliminating a number of pointers, simplifing
2038 kes Fix some of the mtx-changer grep commands for tape label readers.
2039 kes Convert a number of bsendmsg into the appropriate send/warning/error
2040 message class calls.
2041 kes Suppress the using database message in the .sql command.
2042 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
2044 kes Add context menu for floating a window.
2045 kes Some minor cleanup and name changes in qt-console
2046 kes Add doing mt setblk 0 in Win32 mtx-changer.
2047 kes Apply Martin's bug fix to move definition of ENODATA for
2049 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
2050 sqlite2 and sqlite3.
2052 kes More pruning cleanup.
2053 kes Turn on wait_for_drive by default in mtx-changer.
2054 kes Turn on Batch insert code by default as it now passes regression.
2055 kes Add ./configure --enable-bat to enable building of Bat.
2056 No install yet though.
2058 kes Implement a new .sql command for bat.
2059 kes Implement code to turn off pruning in obtaining the next volume.
2060 Pruning is turned off for the status dir command, but turned on
2061 for SD requests and for the list nextvolume command.
2063 kes Correct Qmsg() that was not updated correctly when committing a
2064 previous change (probably the recent TLS patch).
2066 kes Write new subroutine is_volume_purged() that explicitly checks
2067 if the Volume is purged, and if so marks it as such. This should
2068 resolve problems reported about needing to mount twice to recycle
2070 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2071 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2072 amount of duplicated code.
2073 kes Do volume pruning only for the Media Type desired (reduces pruning time
2074 if multiple Media Types are in the same pool).
2075 kes Implement more detailed info in the Job report for the Bacula version
2077 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2079 ebl Add bbatch tool to bench database and insert mode.
2080 Fix sql quote stuff in batch mode
2081 Fix sql stuff for mysql
2083 kes Correct problems with am/pm scheduling. Fixes bug #808.
2084 kes Implement new prunning code that prunes up to 1000 jobs at
2085 the same time. The same technique can be applied to a number
2086 of other prune/purge subroutines.
2087 kes Add an insanity check when starting a new tape job to ensure
2088 that the tape position has not been changed. If so fail the
2090 kes Fix Win32 build for dlls to add the folllowing:
2091 src/lib/bsock.c -- new file with new entry points
2092 src/lib/dlist.c -- new entry points
2093 src/cats/sql_create.c -- new entry point
2094 src/cats/sql_cmds.c -- new DATA item exported
2096 ebl batch mode cleanup bscan-test is ok now.
2097 kes Implement SD code to check length of disk volume before appending.
2099 kes Correct return status on db_batch... routines.
2100 kes Add call to db_write_batch_file_records() to migration code.
2101 ebl Fix AfterJob timing
2102 kes Move the checking of the database in initializion of the Director
2103 to after we drop privileges. This avoids the need for both root
2104 and bacula access to the DB.
2105 kes Correct a misplaced variable definition in src/filed/backup.c
2106 kes Correct how the new batch insert db_create_attributes_record()
2107 uses the arguments. Caused a seg fault in bscan.
2108 kes Implement lock() and unlock() methods in DEVICE class.
2109 Implement block() and set_block(xx) methods in DEVICE class.
2110 kes Modify bnet_connect() so that it uses time() to check for the
2111 wait time expiring (on some OSes, some system calls may not
2112 return immediately).
2113 kes Modify Verify to obtain the previous JobId when it is actually
2114 running rather than at schedule time (as it was in 1.38.x).
2115 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2117 kes When checking pid in pid file, continue running if the pid is
2118 the same as ours. This occurs on IRIX after a system crash.
2121 kes Extend new GUI API.
2122 kes Make the ua structure a class, and implement send_msg(),
2123 error_msg(), warning_msg(), and info_msg().
2125 kes Apply fix from for building wx-console on the Mac from
2127 kes Implement new select mechanism for GUI programs.
2128 kes Reorganize initialization of stackedWidgets in bat.
2130 kes Add updated nagios plugin supplied by Christian Masopust.
2132 kes More bat implementation.
2133 kes File migrate bug with Pool Occupancy using mediaid instead
2134 of jobids. Fixes bug #795.
2135 kes Fix orphaned buffers in filed backup and verify due to
2136 crypto buffers not freed during errors. Fixes bug #789.
2137 kes Extend new GUI api code to tree commands.
2138 kes Ensure that tree and dot commands check console ACLs.
2139 kes Permit marking directory with trailing slash.
2140 kes Allow 20 console connections (instead of only 10).
2142 kes Add smartctl call to bacula-sd.conf as an example of getting
2145 kes Modify jobq.c to let simultaneous restore jobs run. This may
2146 cause them to fail if they cannot get a drive.
2147 kes Add Client Connect Wait to Storage daemon to permit users to
2148 modify the time the SD waits for a FD connection.
2150 kes Correct virtual changer check which was backwards. This caused
2151 volumes to be unloaded into slots already occupied.
2153 kes Apply Command ACL filter to JobId list in restore command.
2154 kes Correct typeo in var.c patch.
2156 kes Don't let Bacula prune File or Job records for the current Job.
2157 kes Fix variable substitution pad + inc bug reported (with patch)
2160 kes Correct SQLite log table index as reported by Luca Berra.
2162 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2164 kes Begin implementing new comm signals for API.
2165 kes Fix a few places in lib/message.c where the open fd may
2167 kes Continue implementing lib/bsock.c (real class). Make jcr,
2168 who, host, and port private. There are new methods to access
2169 them for non-class use. This required touching a number of files.
2171 kes Add LANG=C to autoconf/randpass so it works with languages other
2172 than English. Fixes bug #788.
2174 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2176 You will not be able to generate Include/Exclude list any more.
2177 It will be fixed soon.
2178 If you want to use this, you can apply
2179 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2181 kes Restore of sockets created false error messages because Bacula
2182 no longer restores sockets, but the code was still trying to
2183 set the attributes on a non-existent file. Reported by a user.
2184 ebl finish RecyclePool feature
2185 Media will takes Pool.RecyclePool
2186 when moving from Scratch to a Pool or when user will do
2187 update volume=xxx frompool
2188 To use it, add RecyclePool = aPool to your Pool resource
2191 RecyclePool = Scratch
2195 kes Expand new BSOCK class adding signal() and new BNET signals.
2196 kes Begin enhancing the dot commands adding a new API function
2197 that returns more information and will make it easier
2198 to interface to the Director from a program.
2200 kes Make DEVICE fd private. Its new name is m_fd, and can be
2201 obtained with dev->fd() outside the class. This is the
2202 first of many DEVICE members to be made private.
2203 kes Implement Michael Renner's idea on having a virtual disk
2204 changer. I made some minor modifications (e.g. I did not
2205 implement the Virtual Changer directive, but simply set
2206 the Changer Command to an empty string.
2208 kes Implement a BSOCK send() method that writes the whole record
2209 in a single write() request rather than in two.
2210 ebl add update volume=xxx recyclepool=yyyy
2211 volume takes recyclepool from pool when using update volume=xxx from pool
2213 kes Fix encryption deblocking bug, which caused some restored files
2214 to be truncated. This fixes bug #763.
2215 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2216 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2218 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2219 ebl Use btime_t instead of uint64_t in media patch.
2221 kes Optimize the use of the database a bit in the Status dir command.
2222 Only open it when needed, ensure that if any previous database
2223 was opened, it is closed.
2225 kes Correct VolCatBytes bug from media patch.
2226 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2227 in the case of orphaned records.
2228 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2229 and File records in 300K chunks to be more efficient. This
2230 idea came from Juan Luis Frances (if I remember right).
2231 kes Apply Eric's scratch patch that moves a purged Volume to
2232 the RecyclePool. Question: how is RecyclePool set? what
2233 happens to the ScratchPool?
2234 kes Apply Eric's media patch that collects read/write media
2235 times as well as byte counts. This patch requires a
2236 simultaneous upgrade of the DIR and SD. Note, there
2237 should be some way to turn off timing. I'm not sure
2238 times are in Bacula units.
2239 kes Apply Eric's batch-insert patch.
2241 kes Update projects list.
2243 kes Implement Include/Exclude file lists in FD as dlists using
2244 the new dlistString class. This permits efficiently having
2245 large include/exclude lists and completes project Item 25.
2246 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2247 console is authorized to cancel the job. This fixes bug
2249 kes Modify SD so that the VolCatJobs medium record is updated
2250 at the beginning of a Job rather than the end. This
2251 fixes bug #775 where exceeding MaxVolJobs caused jobs
2253 kes Added a mutex around getting and setting Volume information
2254 so that multiple simultaneous jobs will single thread.
2256 Switch to using Subversion
2257 kes Remove src/pygtk-console/ from configure
2259 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2260 plus the entrypoints.
2261 kes Apply patch supplied that corrects debug print
2262 in canceling jobs for max run time. Supplied as
2263 part of bug #621, which was previously fixed.
2265 kes Test on job_canceled() and sd_msg_thread_done inside
2266 loop starting the message thread to avoid a race condition.
2268 kes Remove rl_catch_signal from console.c as it conflicted
2269 with the header definition. Fixes bug #765.
2270 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2272 kes Clarify some stored/acquire messages to indicate if the
2273 problem is with read or append.
2275 kes Fix memory leak with storage ids in cats/sql_get.c
2276 kes Terminate watchdog earlier to avoid reference to released
2277 memory -- reported by Jason Austin.
2278 kes Move closing the database from jobq.c to the director daemon
2279 termination routine. This fixes memory leaks for shadow jobs
2280 (i.e. migration jobs).
2281 kes Free up the unique jobid chain items in migrate.c. This fixes
2282 a memory leak problem.
2283 kes Convert some ugly looking for statements to use foreach_alist
2284 in findlib/find.c. This will facilitate converting the structures
2285 to use dlist (for large include/exclude lists).
2286 kes Fix a bug in the btree.c and btree.h routines, then rename them
2287 rblist and add them to be built in src/lib. Include some new
2288 methods written by Rudolf Cejka that make the code more readable
2289 (hides some of the ugly casting).
2290 kes Add set_next() and set_prev() methods which make the code much more
2291 readable. Also add a new dlistString class that facilitates storing
2292 strings in dlists. To be used in the large include/exclude lists.
2293 kes Make some trivial modifications to lib/tree.h that use rblist
2294 rather than dlist for storing the tree links. This was suggested
2295 by Rudolf Cejka. The result of this is that the restore tree now
2296 uses red-black binary trees rather than simple linked lists. This
2297 should give rather dramatic speed improvements for directories
2298 contining large numbers of directories/files (more than 10000).
2300 kes Fix maxruntime bug #621.
2302 ebl Implement the include JobID in spool file name project.
2303 kes Reorder projects file in order determined by Jan 2007 vote.
2304 kes Implement item #12 on project list -- quick release of FD by
2306 kes Fix open of SQLite3 db where user does not have write permission
2307 so that DIR does not crash. Fixes bug #761.
2309 kes Add back missing @ in Win32 Makefile.
2310 kes Change 'Device not configured to autolabel' from INFO
2312 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2313 which should restart an indefinite # of times.
2314 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2315 other DIR specifications.
2317 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2318 Fix path quoting in SQLite scripts.
2319 Fix problems with SHGetFolderPath.
2321 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2323 kes Fix Job restart on error bug that promotes an Inc to a Full
2324 backup. This should fix bug #755.
2325 kes Add qt-console and first cut of code.
2329 kes Fix Bacula->Documentation link on Win32 to point to index.html
2330 instead of bacula.html. Fixed bug #750.
2331 kes Return JobId in db_get_job_record() when JobId==0. This should
2333 kes Do not release source pointers when restarting a failed job.
2335 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2336 This *should* fix bug #747.
2337 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2340 kes Modify USTORE constructor to set an empty store_source string,
2341 and don't copy the store_source string in a cancel. Hopefully
2342 this will fix Arno's seg fault, bug #744.
2343 kes Add back code to disable conio in configure. Fixes bug #743.
2344 kes Correct the Options scanner in the FD to correctly handle
2345 SHA1 option, which was eating the next option. Reported by
2347 kes Add code to indicate when the SD is spooling, spool wait, and
2348 despooling as requested by Alan Brown.
2350 Version 2.0.0 released: 4 January 2007