1 Technical notes on version 2.5
6 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
7 examples/database/dbcheck.sql
10 dbdriver in bacula-dir.conf
12 enhancement to wait command: wait mount ...
17 filepattern (restore with regex in bsr)
20 remove reader/writer in FOPTS????
22 ================== Warning !!!!!! ==========================
23 This BETA release of Bacula 2.5.x development code uses libtool
24 to generate the Bacula libraries as shared objects rather than
25 being directly linked in as in prior versions. This means that
26 the Bacula shared objects, must either be in a shared object
27 directory known to the loader or they must be in the directory
28 that may be specified on the ./configure line using the
31 ./configure --libdir=/full-path/dir
33 the default /usr/lib. If --libdir is specified, there should be
34 no need to modify your loader configuration provided that
35 the shared objects are installed in that directory (Bacula
36 does this with the make install command). The shared objects
37 that Bacula references are:
44 If you have problems with libtool or you wish to use the old
45 way of building static libraries, you can do so by disabling
46 libtool on the configure command line with:
48 ./configure --disable-libtool
49 ==============================================================
54 kes Split volume management code out of src/stored/reserve.c into
56 kes Modify configure to do an automatic make clean. This ensures
57 that any changes to ./configure options are handled correctly.
59 Beta version 2.5.16 release:
61 ebl Rename JobStat table to JobHistory
62 kes Ensure that only normally terminated jobs are migrated.
64 kes Add Makefile dependency when using LIBTOOL_LINK so that any
65 change in ./configure options will be accounted for.
67 kes Fix typo in the ACL patch that I overlooked.
68 kes Apply Marco's libtool include patch.
70 kes Apply Bastian Friedrich's ACL patch to eliminate ACL
71 errors during restore.
72 kes Minor cleanup of create_restore_volume_list() code.
73 kes Fix typo in console Makefile.in
75 ebl Fix #1110 about RunScript that can't execute a script with
76 Unicode caracters in the path.
78 kes Apply tray-monitor patch from Bastian Friedrich to make it
81 kes Apply cleanup patch from Marco
82 kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
83 that implements libtool to create shared objects out of
85 kes Fix tray-monitor so it will speak to new FD.
86 ebl Fix bug with ansi label when volume name length < 6
87 ebl Fix segfault in debug level > 50 with btape.
88 ebl Remove warning message in btape when command is empty.
89 kes Fix Win32 build to pull in new BACULA define.
91 kes Change IncludeDir to Exclude Dir Containing.
92 kes Implement code to prohibit ExcludeDirContaining in an
93 Exclude section (same for Plugin and Options). A bit
94 of a kludge with RES_ITEM2 ...
95 ebl Add field to command list to restrict Runscript console
97 ebl Use a separate JCR when running Console command with Runscript.
98 ebl Permit to mark version as Beta in some ouputs
100 kes Add plugin types in jcr.h to reduce need to cast.
101 kes Do better checking of plugin return values.
102 kes Free plugin context after calling pluginFree() as
104 kes Allow plugin to call JobMessage with NULL context.
105 kes Do not add plugin to global list if loadPlugin returns error.
106 kes Rework plugin.h a bit to reduce dependence on Bacula.
108 kes Move generation of bsr file for Virtual Backup to run section
109 so that it is generated just before actually running.
110 Suggested by Graham Keeling.
112 kes Add malloc and free Bacula entry points for plugins. Increment
113 FD plugin interface version. Create a bacula plugin context
114 structure to keep track of whether or not the plugin is disabled.
115 kes Apply FileIndex fix for plugin name stream suggested by James.
116 kes List plugins in FD status report when debug > 0.
118 ebl Add a new VerId variable that is printed in version command.
119 kes Fix migration SQL not to migrate a job that has not terminated.
120 This is a partial fix to bug #1164.
121 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
122 backup start time bug reported by Graham Keeling.
124 ebl Fix possible bug in cancel_job() with job that are not
127 kes Fix bat build for Win32.
129 kes Copy plugin link field into ffpkt.
131 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
132 It provides FileRegex in bsr files and code to collect regex
133 from the user during restore, an Allow Mixed Priorities feature,
134 and documentation for the above.
135 ebl Remove db berkeley from configure process
136 kes Do dirty check on hostname (Linux only) and if not resolvable
137 use localhost as default.
138 kes Increase vtape max block to 20GB.
140 kes Refactor restore code to create a close_previous_stream(). This
141 This may destabilize the source.
142 kes Implement planned startRestoreFile() plugin call.
143 ebl Remove missing Loaded information from status slots storage command.
144 ebl Fix Console command problem that cancels the job
145 kes Add more plugin restore debug code.
147 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
148 kes Rewrite plugin restore interface a bit to correspond to how Bacula
149 creates and writes to the restored file.
150 kes Add some DebugMessage() calls to the bpipe-fd.c program.
152 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
153 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
154 Bat; allow add and delete in place of mark and unmark.
155 kes Another attempt to fix the endRestoreFile plugin bug noted below.
157 kes Apply dbi driver patch from Joao.
158 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
159 Bastien Friedrich reported the bug.
160 kes Create plugin instance only when FD job starts.
161 kes Add new FD plugin event: bEventCancelCommand when
162 a cancel command is issued to the FD.
164 kes Add cmd_plugin flag to jcr so we can globally know if a
165 command plugin is running.
166 kes If command plugin running, do not attempt (for the moment)
167 to get Win32 extended attributes.
168 kes Ensure that proper Win32 flags are set in bfile packet
169 if plugin_bopen() works on Win32.
170 kes Remove generated src/plugins/fd/Makefile
172 kes Implement build and install of bpipe-fd.so plugin.
173 kes Rework the interface that passes packets to the plugin
174 so that the packet is started and ended by the packet size.
175 This allows the driver to do a sanity check.
177 kes Rework the pluginIO Bacula internal code to enable
178 proper handling of Win32 error codes from GetLastError.
179 kes Apply Joao's patch to regress startover_libdbi.
181 ebl Add -B option to dbcheck to get catalog information
182 kes Fix Win32 build to include new library function.
183 kes Remove some old reader/writer code.
184 kes Implement ./configure --with-plugindir=xxx
185 ebl Fix the mysql bug in the new accurate code
186 kes Improve plugin debug. Create plugin test.
187 kes Set main thread specific data to INVALID because it
188 has no jcr. This allows debug output to work correctly.
189 kes Add src/plugins/fd/Makefile to ./configure process.
190 kes Make first cut attempt to correct SQL that computes the current
191 Pool usage. This is to fix bug #1159.
192 kes Do a bunch of plugin cleanups for Win32 and more careful checking
193 of PluginDirectory and whether or not a plugin was found.
195 kes This code should fix the race condition that leads to a Director
196 crash at job end time when the job list is updated. This was reported
198 kes Add more plugin documentation and fix include of config.h for
199 Win32 build (I hope).
201 ebl Revert to htable instead of rblist
202 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
203 tree instead of htable.
204 ebl Use a dedicate DB link to compute and send the accurate list
207 kes Fix compile errors in filed/fd_plugin.c.
209 kes Remove all double quotes from SQLite creating script and
210 replace by single quotes as suggested by John Huttley.
212 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
213 It significantly improves the performance of dbcheck for
215 kes Fix bad debug code call in src/filed/accurate.c
217 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
218 output. Perhaps we really need to implement M_SAVED.
220 kes Fix bug #1156 FD crash during processing of Accurate data.
221 kes Tweaks to htable code to improved debugging and make names
222 a bit more meaningful.
224 ebl Remove time_t from update_stats()
226 kes Modify the license of the example plugin program to allow
227 it to be used by anyone for making a Bacula plugin.
228 kes Make apply_rp_codes() in bpipe-fd.c be static.
230 kes Remove Encryption and Accurate lines in vbackup output -- not used.
231 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
232 kes Add host name to items printed during dump.
233 kes Make Check File Changes default on.
235 kes Set the default FD timeout to 3 minutes (previously 30).
236 kes Apply Bastian Friedrich's weird spelling correction patch.
238 kes Always print Verify hash differences. Rename variable to make the
239 code slightly more readable.
241 kes Correct tests for MaxFullInterval as reported by
242 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
243 kes Fix MaxDiffInterval code as well.
244 kes Enable Win32 plugin load code in lib.
245 kes Make Verify code that computes disk checksums use the same
246 algorithm as backup when dealing with sparse files.
247 kes Attempt to run VSS on any systems newer than Vista -- should
248 make it work on Windows Server 2008.
249 ebl Change the new statistic implementation. Remove the UseStatistic
250 directive and add a 'update stats [days=...]' command. You can
251 now decide when copy job records from Job table to JobStat.
252 Statistics are much more accurate with this.
254 kes Fix SQL case problem that may cause the failure of DiskToCatalog
256 kes First cut adding SD plugins.
258 kes Add Slot if it is non-zero to writing bsr file after a
260 kes Change a number of bnet_fsend() into class method calls.
261 kes Begin audit of diff of 2.4 branch to trunk code.
263 ebl Fix the mysql creation script that double-created an
264 index of the same field on the Media table.
265 Add an index to on VolumeName to the Media table for mysql.
267 kes Another try at fixing Vbackup. It looks much better this time.
268 Disable file index sanity check in FD with value stored in
269 attributes record because with Vbackup the File Index gets
270 changed, but not the attributes record.
271 Enhance some debug code.
272 Fix handling of re-indexing records that are copied in Vbackup.
274 kes Made level_to_str() know about Virtual backup.
275 kes Set correct Virtual backup write pool.
276 kes Fix compile warning in new dbcheck port code.
277 kes Fix migration code broken by previous virtual backup fix.
279 kes Fix problem of Virtual backup not writing a sequential FileIndex.
280 kes Reset Virtual backup time/date to the value from the last backup.
281 kes Ensure that storage name is passed to SD on read.
282 kes Correct a problem with Level and Virtual backup, rework how
283 bsrs are printed in debug to use standard routine.
284 kes Apply patch from Chris in bug #1133 that provides alternate db port
286 ebl Remove catalog dependency from bcopy tool.
287 ebl Modify catalog scripts to have an easier packaging integration,
288 using default variables.
289 Make difference between SQLite3 and SQLite in db_get_type()
291 kes Apply most of changes in a patch from:
292 Michael Stapelberg <michael+bacula@stapelberg.de>
293 that allow the Bacula FD to compile on IRIX 6.5.
295 kes Apply patch from Bastian Friedrich that accepts a yes on a
296 delete volume command line.
297 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
298 job when reading from one autochanger and writing to another.
299 kes Minor tweaks (copyright dates convert to use method instead of bnet).
301 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
302 drives when no tape is mounted.
304 kes Add additional info to some SD messages.
305 kes Add fix supplied by Martin Simmons for turning off EOL character
306 in new console multi-command code.
308 kes Fix a Verify InitCatalog problem where in certain cases
309 a garbage filename may be entered in the verification database. This
312 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
313 sent in by Riyas Yoosuf.
315 kes Fix seg fault in Dir during estimate command with no level value
316 given. This fixes bug #1140.
318 kes Add message to migration job when the target job is already migrated.
319 This closes bug #1129.
322 kes Raise some restore debug levels.
323 kes Replace off_t by boffset_t where ever I found it.
325 kes Define a machine dependent ioctl request type for use with
328 kes When a migration job actually runs, re-check the Job record
329 and skip if the job is already migrated. This should
330 significantly reduce the problems with bug #1129.
332 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
333 turn off glibc checks that prevent getting good dumps.
334 kes Implement console 'wait mount' command. Doesn't yet work.
335 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
336 kes Break the do_swapping into do_unload, do_swapping, and
337 do_load. It is much more logical that way.
338 kes Implement a set_dcr_from_vol subroutine in acquire.c for
339 reading volumes. This allows the dcr to be refreshed after being
340 zapped when the wrong volume is mounted.
341 This should fix bug #1126 -- During multiple tape restore, bacula
342 does not ask for physical tape change, but rereads same tape
344 kes Apply patch submitted for bug #1107 with a small modification.
345 This fixes a bug where bcopy copied too many records.
346 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
347 This fixes bug #1124.
348 kes Make the default bat restore Pool be Any. This fixes bug #1118.
350 kes Remove debug statement that crashes the SD at the end of
351 a tape during restore. Fixes bug #1125.
353 kes Implement Win32 bat changes made to Branch-2.4
355 kes Tweak separator command in console to start disabled and
356 allow defining no separator character. Also make code a
357 bit more fault tolerant.
358 kes Make btraceback write the traceback to the working directory
359 before attempting to mail it.
360 kes Add a RFC to Projects.
362 kes Attempt to implement a kludge to make Qt work with bat
364 kes Setup rstorage correctly. Virtual backups are working.
366 kes Move setting JobLevel and JobType into a method, which should
367 allow completing Virtual Backups.
368 kes Fix verify jobs to work again.
370 kes Virtual Backup tweaks -- it is close to working.
372 kes Ensure that SD tried to mount a volume not in an autochanger
373 at least once before asking for operator intervention.
374 kes Make SD aware of Virtual Backup jobs.
375 kes Add VirtualFull for bat.
376 kes Changes to get read storage correct for Virtual Backup.
378 kes Remove old code from label.c
379 kes Split display_display_info() out of write_bsr_file()
380 kes do_vbackup_init() working -- i.e. bootstrap file built.
381 kes Change Bacula trademark owner from John Walker to Kern Sibbald
382 kes First non-working cut of vbackup
383 kes Correct FD heartbeat code to use volatile variable accessed by
385 kes Zero thread id with memset if on Win32 in case it is a struct.
386 kes If cannot create JobMedia record, continue to try to write eof
387 and clean up in block.c
389 kes Add code to interface OpenSSL to new Win32 pthreads code which
390 used a structure for thread_t.
392 ebl tweak bat for win32 compilation
394 ebl Remove tokyo cabinet from the source
395 ebl Update configure/autoconf to support berkeley DB
396 ebl Add a sort to db_get_file_list() to improve bsr construction time.
398 kes Add a mtx-changer.conf file that is not overwritten during
399 an upgrade. It fully configures the mtx-changer script.
400 kes Clear in-use bit on vol when unused while swapping.
402 kes Remove sleep at end of ./bacula
403 kes Clear hash packet for hardlinked files correctly. This corrects
404 a long standing bug where hardlinked files selected individually
405 would occasionally not be restored.
407 kes Apply Eric's patch to ensure that autoprune does not return
408 a Volume not in the autochanger unless requested to do so.
409 kes Correct bat restore display of multiple drives. This fixes
411 kes Do find_a_volume() each time an unload is done. This
412 fixes the failure of maxvol2-test.
414 kes Add some SD debug code.
415 kes Do find_a_volume() each time an unload is done.
416 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
417 and adds --with-db-port to ./configure.
418 kes Use Qmsg() in job.c watchdog callback.
420 kes Release main control rwlock if ABORTing.
421 kes Make watchdog connect timeout queue messages rather than sending
422 directly to avoid lock conflicts with the real thread.
423 kes Add const char in dbd.c to avoid compiler warnings.
424 kes Fix python compiler string warning. Note, IMO the GNU C++
425 compiler guys have made a *very* bad change to their compiler.
426 They now force all strings to be 'const' unless you explicitly
427 cast them, which is extremely ugly and ruins nice code as well
428 as creates a lot of useless work.
430 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
431 mt. This fixes bug #1116.
432 kes Add const in python files to reduce compiler warnings.
433 This may have to be backed out because of later compiler
435 kes Fix failure of 2drive-concurrent-test. Always read label;
436 clear_unload() only after drive is defined in acquire_for_read().
438 kes Generally clean up the manual tape loading code. The main
439 conceptual change is that when a volume is marked to be unloaded,
440 its volume name is retained, and it is only marked as unloaded
441 when either the autoloader says it is unloaded or another tape
442 is read on that drive.
444 kes Add debug code and refactor subroutine in stored/mount.c
445 kes Fix format problem in bscan output reported in bug #1105.
446 ebl Fix get_next_volume_for_append logic with autochanger
447 - use pruned volumes if found
448 - don't reset the inchanger flag after getting a recycled volume
450 Fix recycle_oldest_purged_volume to take InChanger flag in account
452 ebl Add mmap/unmmap implementation for tokyodbm under win32
454 kes Make first step toward eliminating globals from config
455 scanning. Also should be a workaround for FORTIFY_SOURCE
456 GNU C bug -- fixes bug #1042.
458 kes Apply duplicate job tests to restarted jobs.
459 kes Copy more data when restarting a job so that run
460 overrides are kept. This should fix bug #1094.
462 kes More word alignment cleanup.
463 kes Fix bug where SD did not ask operator if the device could not
464 be opened. Reported by Eric.
466 kes Add dbuser to DIR conf file (replaces user).
467 kes Add --with-db-password to ./configure
468 kes Fix regress to handle db_password.
469 ebl Add new 'status storage slots' that list autochanger
471 ebl Update vtape driver to compile only under Linux.
472 ebl Fix a bug when restoring with a wrong mediatype.
474 kes Eliminate ints from conf files and structures to avoid
475 word alignment problems
477 kes Fix bug reported by Scott Barninger where the bacula script
478 refers to scripts in the wrong directory. Needed to meet the
479 requirements of recent FHS location changes.
480 ebl Disable vtape for FreeBSD.
482 ebl Modify disk-changer to check if slot contains something before
485 ebl Fix vtape on win32 and debian.
486 ebl Fix autoselect patch (cause segfault).
488 ebl Fix autoselect option broken for a while. Fix #1089. Need some
489 work with StorageId to be able to use a particular drive in a
492 ebl Rename vtape to vtape.
493 ebl Update vtape driver.
495 ebl Modify vtape driver to avoid sparse file.
496 kes Add make clean of qt-source directory during ./configure
497 kes Store last block number written to tape in DEVICE and
498 use it for testing for correct last block on EOT.
500 Release Version 2.4.0:
504 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
505 This fixes bug #1095.
507 kes Add create_postgresql_database.sql to Win32 installer. Should
508 fix problem reported by Juilio Monteiro.
509 kes Get correct slot when auto unloading a device. This fixes bug
512 kes Fix multiple media restore.
513 kes Make DEVICE Slot private and access it via a method.
514 Allows better control over when it is set and cleared.
515 kes Fix possible seg fault if SQL error.
517 kes Add Martin's fixes to argument scanning for the estimate
518 command. This fixes bug #1093.
519 kes Add debug code to SD.
520 kes Fix renaming a Volume, which used the wrong Volume name.
522 kes If operator has rewind tape, print warning, release tape and
523 try once more. If tape is positioned somewhere, something went
524 wrong, so mark the tape in error and try once more. Previously
525 this error was fatal, now it produces an error message.
526 kes Ensure correct volume name displayed during restore
527 kes Ensure that Volume is mounted for restore.
529 kes Fix a few more Coverity reported problems.
531 kes Apply Allan Black's status dir job count patch.
532 ebl Add information about IMPORT/EXPORT slots in mtx-script.
533 kes Enhance a couple of SD debug messages.
534 kes Tweak unload flag setting and ensure it is set during swap.
536 ebl Fix #1091 about bad output in estimate command.
538 kes Modify autochanger locking to attempt to avoid race
540 kes Make sure device not busy before doing label command.
541 kes Display open() errors except when polling. Previously too
542 many were suppressed. This should fix bug #1070.
543 kes Fix Win32 reparse points. Bacula will not recurse into any
544 reparse point directory, including mount points, unless the
545 directory is explicitly mentioned at the top level (same as
546 with Unix). A file that is linked to another file will be
547 backed up -- much as Unix does for hardlinked files.
548 This fixes bug #1041.
550 kes Remove double quotes from ChangeLog and ReleaseNotes
551 kes Remove StorageId test when pruning and recycling (Eric's changes).
552 kes Remove old form of locking when getting volumes -- causes deadlock.
553 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
554 the name unique and to eliminate compile time error.
555 kes Add accurate.o to Win32 FD Makefile
557 kes Fix cats dll build on Win32 after db_update_job_end_record
558 calling sequence change.
559 ebl Switch to tokyo dbm instead of htable in accurate code
560 ebl Include tokyo dbm to bacula source tree
562 kes Fix buffer overruns detected by Coverity.
564 kes Tweak joblog display.
566 kes Implement --without-qwt
567 kes Fix layout of restore tree dialog
568 kes Add configure bat QWT libraries, so that bat can be built
569 with or without the QWT libaries.
571 ebl Add dummy tape driver for regression tests.
572 kes Make sure we unload the right slot when swapping.
574 kes Add debug times, reduce size of two-pool-changer test
576 ebl Tweak autoconf scripts for vtape
578 kes Improve SD reserve debug code.
579 kes Testing an improvement to free up volumes no longer in use.
581 kes Rework SD acquire for read to handle autochanger Volume
583 kes Implement regression that explicitly tests swapping a Volume
584 from one drive to another.
585 kes Enhance disk-changer to detect most error conditions.
586 kes Fix SD code so that it properly swaps a Volume between drives.
587 This fixes bug #1083.
589 kes Apply libdbi patch from Joao Freitas for regress and for
590 Bacula trunk. Regress now works with libdbi. Nice.
591 kes Apply .nobackup patch from bug #1077 submitted by
593 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
594 name into jobs cloned via the run directive.
596 kes Prevent a Volume that is being swapped from being freed from
597 the volume list. This will most likely fix, at least partially,
599 kes Fix strippath so that it does not get a buffer overrun and crash FD.
600 This fixes bug #1078.
601 kes Remove 50 millisec wait in SD that broke debugger.
602 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
603 that a job may run, counted from when the job was scheduled.
604 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
605 a job may block waiting for a resource, counted from when the job starts
606 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
607 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
608 that implements multiple commands per line in the console when using
609 readline. Modify the default to use a semicolon as the command separator.
611 ebl Fix SQL query in migration code.
612 ebl Make accurate mode with hash disk pass regression tests
614 ebl Implement first cut of accurate backup with hash disk.
616 kes Force unload of volume when wrong volume mounted in SD.
618 kes Fix bat seg fault at termination.
619 kes Add Bacula generated version to bat about box.
622 kes Experiment with allowing multiple read jobs.
623 kes Move final volume swapping code to DCR method and
624 call it from acquire_for_read().
625 kes When wrong volume is mounted during read, unload_autochanger.
627 kes Integrate the libdbi changes from Joao Henrique Freitas
629 kes Stop searching for Volumes in SD askdir if DIR returns the
630 same volume name twice in a row.
631 kes Close bat console windows first to eliminate error message
634 kes Tweak the swap Volume from one drive to another code so that
635 it now seems to work.
636 kes Resolve several problems with recycling that broke the new
637 code (these problems are in 2.2.9 as well).
638 kes Remove the volume lock when calling the sysop code.
639 kes Don't mark a reserved volume with no writers as unused otherwise
642 kes Rework class structures for VOLRES, DCR, and DEVICE to make
643 the method names a bit more logical, and for more logically
644 handling the responsibilities.
646 kes Remove redundant code in terminating the scheduler that just
647 causes a seg fault in many cases.
648 kes Cleanup releasing a volume and make it a DCR method.
649 kes Improve algorithm for detecting pre-reserved volume and
652 kes Tweak volume swapping code so it works.
653 kes Correct name overloading in mount.c
654 kes Replace released flag in VOLRES with reserved and add access
655 methods for the VOLRES class.
656 kes Prevent volume from being released while being swapped.
657 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
658 plugin that add %w (where) and %r (replace flag) editing to
660 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
662 kes Refactor parts of stored/mount.c
664 ebl Add sanity checks for VolWriteTime and VolReadTime
665 ebl Take care of bad clock changes while computing VolWriteTime
666 and VolReadTime. This should fix or limit #1066
667 kes Correct error string numbers in dird/catreq.c
668 kes Restructure reserving, acquiring, and mounting volumes. Calls to
669 autochanger are deferred for mount.c -- simplifes the code.
671 kes Do not prune any running job. It just fails the job.
672 kes Lock the volumes when changing dev->reserved_device and marking
673 the volume unused otherwise the device can get reserved by
674 another job before the volume is released, thus blocking it.
676 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
677 kes Fix bug #1063, reuse of freed ptr in list nextvol.
678 kes Release regex compile buffer in filed/job.c
679 kes Add proper type of const char in sql_create.c
680 kes Turn off debug in daemon termination routines
681 kes Move free_volume_list() before devices are freed in stored.c
682 kes Fix reference to uninitalized stack variables in bregex.c.
683 This should correct bug #1067.
685 kes Fix possible seg fault in SD when freeing a volume entry.
687 kes Implement unload_dev() before swap device.
688 ebl Add statistics prunning with option and menu
689 kes Separate unload_dev() from unload_other_device() in autochanger.c
691 kes Apply patch from bug #1069 that corrects spurious error messages
692 when ACLs enabled on SGI but no ACL exists.
693 ebl Fix small segfault in bacula-sd when debug level is 500
694 kes Modify run_program() and run_program_full_output() to use
695 call by reference for the results string. This corrects a long
696 standing problem where the address of the string may be changed
697 in the subroutine but not in the calling program.
699 kes Re-enable code to remember last volume mounted on a non-tape
701 kes Add patch supplied in bug #1068 that fixes a SD crash when using
702 a Virtual autochanger.
703 kes Generate correct JobMedia records during spooling/despooling when
704 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
705 <tih@hamartun.priv.no> for excellent analysis and testing.
707 kes Tweak hash algorithm for htable using Martin Simmons idea
708 for doing a circular shift.
709 kes Remember what volume is in VTLs (previously turned off for
711 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
712 pointed out some problems in creating JobMedia records during
713 spooling with concurrent jobs. Fix the problem by updating the
714 start file position before despooling and generate a jobmedia
715 record at the end of despooling.
717 kes Fix handling of JobMedia records during spooling and when a
718 Volume is changed without actually writing data to the Volume.
720 kes Rework certain SD locking based on gdb tracebacks of deadlocks
721 sent by Eric. This code now uses only the volume_lock() rather
722 than the reservations lock when at EOM and acquiring a new
724 kes Ensure only one exit point in several subroutines.
726 kes Implement bsock code to permit locking. Use the new code in Verify
727 in the FD to prevent the heartbeat thread from disrupting the Verify
728 data sent to the Dir.
729 kes Modify SD locking to eliminate locking the reservations system from
730 outside the system. Use the volume lock when getting media data
731 and reserving a new volume at end of media.
732 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
733 when SD starts are not locked into place.
735 kes Fix error compiling runscript code on 64 bit machines.
736 kes Tweak Win32 mount point code.
737 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
738 cleared giving bad file estimate).
739 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
742 kes Keep Schedule run lists in order as suggested by
745 kes Implement autostart scripts for Debian.
746 ebl Implement upgrade catalog scripts.
748 ebl Apply jobstat patch for long term statistics. Have to implement
749 purge stats command and upgrade scripts.
750 kes Fix mtx-changer.in for broken Debian mt program.
752 kes Fix large number of JobMedia records reported by Eric Bollengier.
754 kes Apply doc fix from bug #1062.
755 kes Resolve crash and improper restore wx-console Win32 restore
756 GUI. Fixes bug #1065.
757 kes Update Win32 wxWidgets to latest version.
758 kes Attempt to do correct handling of Win32 mount points. Should
760 kes Fix Win32 FD backup/restore memory leak due to improper termination
761 of BackupRead/Write. This fixes bug# 1038.
763 ebl Reduce memory usage for accurate backup, working only with ctime
764 and mtime. (not all Lstat field)
765 About 40MB for my Linux system (400.000 files)
767 kes Add dcr->reserved_volume flag that allows us to release a volume
768 even if it is not vol->released. This allows maxvol2 to work when
769 Volumes expire and we are already writing to the device (i.e. a
770 volume is pulled out from under us by another job terminating after
771 we reserve the drive).
773 ebl Permit multiple command/console per runscript definition.
774 RunScript { command = /bin/true ; command = /bin/false ... }
775 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
776 (restart an application) just after the VSS snapshot on windows.
777 kes Don't zap dcr values during release_volume() as they might
778 have the next Volume to be mounted.
779 kes Fix AIX prototype.
781 kes Second cut of drive switching during backup.
784 kes Update Win32 version of wxWidgets to most recent version.
785 kes Tweak Copy job details.
786 kes Rework dir_find_next_appendable_volume to make a bit more effort
787 to find a suitable volume before giving up.
789 kes Make ask_sysop_to_create... to return if waken from wait.
790 This helps get out of blocked conditions.
791 kes Experimental implementation of switch_device in reservations.
792 kes Implement FD version to allow easier protocol changes.
793 kes Add Plugin Options string -- not yet passed to FD.
794 kes Implement PluginOptions ACL.
796 kes Attempt to correct problems with restores with autochangers and
797 use counts going negative
798 kes Rework SD status command and implement API for bat. Implements
799 header, runing waitreservation, devices, volumes, spooling,
800 and terminated status keywords.
801 .status storage=xxx <keyword>
802 kes Clarify TLS error message by adding double quotes around name.
803 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
804 kes Pass jcr to tls routines so debug messages can be handled better.
805 kes Rework jobq resource allocation code, and possibly fix a bug
806 that caused reference counts to get out of sync.
808 kes Rename fd/dir plugin to use Bacula standard underscore.
809 kes Plugin work -- bring dir up to fd level.
810 kes Start implementation of VTL code
811 kes Fix Win32 build after adding new cats subroutine.
813 kes First cut at Duplicate Job implementation.
815 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
816 kes Start PluginOptions string, and refactor a bit of ua_run.c
817 ebl Apply Allan patch that permit to reset recyclepool.
819 kes Test patch -- possible fix or improvement for bug #1053
820 kes Refactor FD and SD status commands to permit new API code in
821 SD, and to fix Win32 build.
822 kes Win32 build is now working.
824 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
825 some ideas in patch from Scott Bailey.
826 kes Begin implementation of duplicate Job control.
827 kes Fix some of Win32 build after recent additions.
828 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
829 which causes the FD to detect whether or not the OS has the
830 honor no dump bit (*BSD systems), and if so, to skip backing up
831 any file with this bit set. The feature is enabled by setting
832 'honor no dump flag = yes' in the Options section of a FileSet.
834 kes Correct po warning message with datarootdir
835 kes Implement more code in dird.c to put configuration parsing in
836 a class rather than use globals.
837 kes Restructure SD status command for implementation of bat API
840 kes Suppress incorrect 'Will not descend from x into y' messages.
841 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
842 daemon globals used by parser.
843 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
845 kes Fix free of plugin_list when none exists.
847 ebl Apply accurate project patch.
849 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
850 on non-mempool object)
851 kes First cut of converting FD .status to work with bat API.
853 .status client=XXX header
854 .status client=XXX running
855 .status client=XXX terminated
856 kes Implement first cut of Copy Job.
857 kes Implement Catalog in Pool resource. It overrides catalog specified
858 in the Client resource.
860 kes Apply patch (with some difficulties) from Joao Henrique Freitas
861 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
863 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
864 ftruncate() actually works. In the case of some (cheap) NAS devices,
865 it does not, and so recycling NAS Volumes does not work. The code
866 simply unlink()s the file, then recreates it. This fixes bug #1011.
868 kes First incomplete cut of big malloc blocks for htable.
869 kes Tweak plugin code.
871 kes Plugin debug code + tweak a couple bat dialog layouts
873 kes Fix creating first JobMedia record during Migration to include
874 proper index. This caused slow restores of migrated jobs.
875 kes Temp fix to plugin name file_index.
876 kes Bacula backed up and restored a MySQL database.
878 kes Implement plugin restore.
879 kes Implement parsing of db_driver to give db_type index.
881 kes First cut of plugin restore code.
882 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
883 and do not strip paths on symbolic links.
884 kes Set catalog backup database and user name from values specified on
885 the ./configure line.
886 ebl Fix #1031 about wrong pool source information in job report.
889 kes Remove a redundant jcr argument to find_files, match_files, and
891 kes Implement '.status dir header|scheduled|running|terminated' that
892 prints the requested status section. With the exception of the
893 header, the other reports have fields separated by tabs (\t).
895 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
896 a resource embedded run command to find a since time if no explicit
897 since time was supplied on the command line.
898 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
899 that updates the state file at job termination time in addition to
900 when the daemon terminates.
902 kes First version where a plugin did a backup.
903 bpipe-fd.so created a backup file, wrote a test
904 string to it, and Bacua could restore this fabricated file.
906 kes Implement DB Driver = string for the DBI driver.
907 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
908 kes First cut of code for loading Win32 plugin dlls. Implement
909 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
910 and implement a dlfcn.h file based on opengroup's definitions of
913 kes First cut plugin directives.
915 kes Apply patch from bug #1049 to prevent stripping the path on a
917 kes Attempt to fix bug #1047 where stripping a path corrupts the
918 heap. Waiting for feedback.
919 kes Correct the Mount message not to suggest labeling a new tape
920 when doing a restore. Submitted by email by John Stoffel.
921 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
922 FD by using casting. Reported in bug #1042.
924 kes A bit of crypto cleanup. More later.
926 Release Version 2.2.8
928 kes Apply patch from Martin to correct bug #1040, bscan sets existing
930 kes Fixed important spelling error in doc -- bug #1045.
932 ebl Fix bextract to be able to extract non-portable Win32 data to
934 kes Move initialization of read/write res lock earlier in the code.
935 This fixes the crash with a null conf file. This fixes bug
937 kes Redefine CURES in lib/parse_conf to be URES and move it all
938 into lib/parse_conf.c -- this responds to bug #1042, but does
939 not fix it. The fix is not to compile with FORTIFY_SOURCE.
940 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
941 the trunk SVN. I don't think this was reported as a bug.
943 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
945 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
947 kes Add DataDespooling and DataCommitting status (committing is
948 the last despooling).
949 kes Finish implementation of new reservations code noted below.
951 kes Fix bsnprintf for float point numbers. I broke recently when
952 parameterizing some variables. This fixes bug #1036.
953 kes Undo recent reservations changes ... will apply them later
954 when they work better.
956 ebl Fixes #1034 which cause mysql to hang the connection after 8h
957 ebl Change default statistics target of filename.name and path.path
958 fields for PostgreSQL. This speeds lookup by indexes. Thanks
960 kes A few more tweaks to new reservation code. Make sure to clear
961 vol released flag when retaking volume. When reading label and
962 label is bad mark volume unused. When recycling, mark volume
963 unused so it can be renamed.
965 kes Fix reserve_volume() so it doesn't release a volume in use
966 (i.e. a volume entry not marked released). This should be
967 the last part needed to fix bug #1018.
969 kes Move Heartbeat documentation from Job to Director resource.
970 This fixes bug #1033.
972 kes Fix existing switch drive SD code to call autochanger to release
973 any old volume. This must be done to keep the autochanger from
974 releasing subsequently newly reserved volumes in doing a close().
975 This should fix bug #1018.
976 kes Fail if attempting to get console input in batch mode. This
977 should help fail RunScript console commands that are incomplete.
978 kes First cut implementing switch_drive() in SD (not actually called).
980 kes Implement first cut running console commands in a RunScript.
982 ebl Fixes bug #1028 where 'Selection Type' option was not usable
984 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
987 Release Version 2.2.7
989 kes Add new free_tls() entry point so that Win32 builds.
990 kes Fix compile warning in src/lib/util.c
991 kes Fix entry point for edit_job_codes() so that Win32 builds.
992 kes Fix seg fault Frank Sweetser reports in regression testing
993 on his systems. The problem was that the original author of
994 bsnprintf.c did not take into account the side effects of
995 using ++x in the argument to a #define.
996 kes Make SD protocol backward compatible with version 2.2.x.
998 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
999 because Bacula no longer restores sockets.
1000 ebl Always use ignorecase fileset option on win32 FD.
1002 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
1003 that implements double quoting include names in conf files,
1004 and also allows piping input by having the first character
1005 be a vertical bar (|).
1006 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
1007 that implement %f in RunScripts to pass the FileSet name.
1008 kes Skip leading | when lex input comes from a pipe as suggested
1009 by Michael Stapelberg <michael@stapelberg.de>.
1011 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
1012 Nerijus Baliunas <nerijus@users.sourceforge.net>
1014 kes Implement Plugin Directory and plugin events.
1016 kes Implement a security enhancement: TLS authentication but no
1017 encryption. Enabled by setting 'TLS Authentication = yes'.
1018 Note when this is on, TLS encryption is turned OFF!
1020 kes This patch corrects a problem where the maximum concurrent storage
1021 jobs counter gets out of sync during restore jobs causing jobs to
1022 'wait on max Storage jobs'. This patch fixes bug #1009.
1024 kes This patch fixes bcopy so that it produces correct Volumes.
1026 kes This patch eliminates spurious output to the console during a VerifyVolume
1027 job that contains encrypted data. It fixes bug #1024.
1029 kes This patch prevents the 'status dir' command from trying to use a scratch
1030 volume and possibly moving it from one pool to another. This patch fixes
1033 kes Add new include to postgresql.c suggested by Marc Cousins so
1034 that it compiles correctly with pgre version 8.3.
1036 kes Fix --archivedir addition to configure. Replace it with
1037 --with-archivedir in configure.in This fixes the regression
1039 kes This patch fixes bug #1012 where the job is canceled because
1040 of Max Run Time exceeded when the job has not yet started.
1042 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
1043 one 'part' to write. Instead of each part being stored on disk,
1044 written to DVD, then deleted from disk, all parts are written to disk,
1045 and only the last is written and deleted from disk.
1046 kes This patch fixes the status command to include the formating string for
1047 JS_AttrInsterting. It fixes bug #1021.
1048 kes This patch should fix the Mac OS X build problem on the latest
1049 Darwin, where sys/types.h was not included correctly (apparently
1050 due to a change in the Mac headers). The solution was to explicitly
1051 ensure that it is defined for the ./configure.
1052 This patch also has a rebuild of configure that includes the Debian
1053 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
1054 kes This patch should ensure that queued messages to the console are
1055 displayed as soon as possible. It should fix bug 1007, but has been
1056 reported not to work.
1058 kes This patch fixes the infinite loop when trying to increase the
1059 maximum number of volumes in a Pool during the add command.
1060 This patch fixes bug #1008.
1062 Release Version 2.2.6
1064 db Remove extra data on estimate command in joblist for bat.
1066 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1067 really change anything, but is the beginning of doing it *right*.
1068 To do it completely right the LastWritten date must be passed to
1069 the SD, but it is not yet done.
1070 kes Minor tweaks to some bat restore SQL.
1071 kes This patch fixes bug #1003 where putting the message output from
1072 a Verify job into the catalog results in a recursive loop. The problem
1073 seems to show up only with postgresql (to be verified).
1074 kes Correct %x to %p in postgresql debug statement.
1076 kes Fix bug #942 where lots of emails where generated when the heartbeat
1077 interval was low and Bacula wanted a different tape from the one in
1080 ebl Add new SD despooling attributes and Dir inserting attributes
1081 job status codes in the catalog (Status table).
1083 ebl Use qmake-qt4 instead of qmake when available (debian system).
1085 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1086 that passing the password via the command line (arg 3) is insecure.
1087 This responds to bug #990 (it doesn't fix it).
1089 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1090 kes Fix a crash in bat when it cannot connect to the Director for example
1091 if the Director is not running.
1092 kes Remove redundant INDEX (JobId) from File table in the trunk.
1093 This fixes bug #992.
1094 kes Make explicit exception to GPL in LICENSE to permit linking
1095 the Win32 FD with Microsoft VSS code.
1096 kes Apply the Solaris package patch from
1097 Masopust, Christian <christian.masopust@siemens.com>
1098 kes Apply the patch to optionally add a timestamp in the debug output
1099 submitted by Mariusz Czulada <manieq@wp.eu>.
1101 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1102 backend (sql_strerror). Fixes bug #989
1104 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1105 It applied with no problems.
1106 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1107 awk are on the path.
1108 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1109 since the status is returned on stderr on Solaris.
1110 kes Activate Close button on tray-monitor window. This fixes
1112 kes Check for NULL item in parse_conf.c before calling it. In the
1113 case of Device, there is no item and this caused a seg fault when
1114 Device appears in the conf file.
1115 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1116 avoids pulling in config.h multiple times in some new code.
1118 kes Fix spurious warning message printed when creating a volume with
1119 a LabelFormat. This fixes bug #976.
1121 Release Version 2.2.5
1123 kes Add JobId in place of Job name in all the Jmsg() output.
1124 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1126 kes Make maxvol-test and new more strict maxvol2-test work.
1127 kes Print JobId in all Jmsg() job output.
1129 kes Add new SD despooling attributes and Dir inserting attributes
1130 job status codes. This fixes bug 961.
1131 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1133 kes Fix doc issue. This fixes bug #963.
1134 kes Fix listing performance problems in bat. Pointed out by
1136 kes Remove old debug code.
1137 kes Fix bat code that tests for Win32. This should fix bug #968
1138 kes Query 5 list wrong Vol after migration. This fixes bug #960
1140 ebl Fix #969 where user can't change Replace option in restore menu.
1142 kes Save jcr in thread specific data (tsd) for each thread.
1143 kes Make Dmsg() print JobId as -%u.
1144 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1145 for the thread if it exists.
1146 kes Remove old reservation debug jid code.
1147 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1148 ebl Add an option that permit to specify spool size in job
1149 definition. (Applying patches/testing/spoolsize_per_job.patch).
1150 You must upgrade SD and DIR at the same time.
1151 dvl Add new configuration item --archivedir
1152 dvl Adjust regression tests to use tmp not /tmp. This will allow
1153 multiple concurrent runs of the regression tests.
1155 kes Fix race condition that drops final block written to volume.
1156 This happens in rare cases with multiple simultaneous jobs
1157 when the Volume fills. This fixes bug #964. May be related
1158 to bug #935 and possibly #903.
1159 kes Eliminate more strerror() and replace with bstrerror().
1160 kes Remove BSD getopt and replace with unrestricted IBM version.
1161 kes Fix Win32 build for changed calling sequences.
1162 kes More tweaks to the mount volume routines to get everything
1163 right. Changed variable name from find to have_vol, which is
1164 much easier to understand.
1165 kes Enhance btimer debug code.
1167 kes Fix FD->SD authorization failure, which was due to spurious
1168 wakeups from a pthread_cond_timedwait(). Simply check the
1169 predicate before continuing. This fixes bug #953.
1170 kes Add const char where needed (more to do). Remove temp debug code.
1172 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1173 kes Don't overwrite error message in check_tables_version.
1175 kes Unlock batch insert tables with same calls used elsewhere.
1176 kes Allow starting 59 jobs a second.
1177 kes Make SD session key more random.
1178 kes Add retry for SQLite opening db if it fails. Probably helps
1180 kes Suppress extra error messages during batch insert failure.
1182 kes Add jcr to timer packets so if killed message can be sent to job.
1183 kes Add JobId to all Dmsg() output.
1184 kes Put some FD auth code on dbglvl rather than fixed.
1185 kes Return insert attributes error message in db msg buffer to avoid
1186 false error messages. Helps fix bug #966.
1187 kes Separate batch init error messages. Probably helps fix bug #966.
1188 kes Make SD code that contructs attribute insert check string lengths
1190 kes If Dir gets an error during inserting attributes, cancel SD.
1191 This reduces unnecessary error messages.
1193 kes Correct search boolean for getting Volume info
1194 ebl Cleanup batch insert code. Probably fixes bug #965.
1195 kes Back out one small change to the reservation system (reserving a volume).
1196 kes Rework how a Volume is mounted. It is now much more intelligent and
1197 will always attempt to use any mounted volume if possible and reduces
1198 calls to the Director asking about volumes.
1200 kes Turn off some code when batch insert not enabled.
1201 kes Edit FD name in connect error messages.
1202 kes Rework the reservation system to take into account that the Director
1203 might give us a Volume that is different from the current one being
1204 used, and to ensure that we don't exceed Maximum Volume Jobs.
1205 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1206 fatal error with multiple jobs running'
1207 kes Add more debug code in reservation system.
1208 kes Implement maxvol-test to check bug #947.
1210 kes Add code to handle tray monitor separated from Win32 FD.
1211 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1213 kes Add missed return in fixing verify bug -- trunk only.
1214 ebl Fix a command parser issue causing a director segfault.
1215 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1216 This fixes bug #954.
1217 kes Increase the max block size to 4MB fixes bug #957.
1218 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1219 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1220 is not properly mounted (recognized) during a poll.
1221 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1222 Job that has differences reports Verify OK.
1223 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1225 ebl Add an option to operate on all pools with update vol parameters.
1226 This complete the project 20. Patch from Nigel Stepp.
1227 ebl Add history support to bconsole when using readline.
1228 Using Ctrl-D to exit doesn't update .bconsole_history
1229 kes Modify new volume algorithm to use max MediaId for generating next
1230 volume number rather than the count of Volumes. This should essentially
1231 eliminate the failure rate if some volumes were deleted. Bug #921.
1232 kes Begin implemention of Optimize Job Scheduling.
1233 kes Implement restore callback that Dirk and I agreed on for bat
1234 restore. This fixes bug #928. Restore of backup of zero files fails.
1235 kes Fix SQL Catalog logging which broke with new db_escape_string
1238 Release Version 2.2.4
1240 kes Fix bacula_cats.def for new db_escape_string().
1241 kes Increase size of name string when FD making connection to SD.
1242 May fix bug #953. FD->SD connection failure.
1244 kes Add code to help Dan debug 2drive-incremental-2disk test.
1245 kes Add code to try to fix bug #908.
1246 kes Add waits to multiple exit detection code to try to force pid
1247 file to always be deleted.
1248 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1249 This fixes bug #950.
1250 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1251 trying to switch drives by checking for blocking before unblocking.
1253 kes Cancel storage daemon in all cases where FD reports error. This
1254 should fix virtually all cases of bug #920.
1255 kes Fix db_escape_string() for MySQL which did not compile.
1257 kes Fix error message that was clobbered when Dir tells SD it does not
1258 have write permission on Volume. This should fix a minor point
1259 in bug #942, but not the main problem.
1260 kes Add code to cancel job in SD if FD connection fails. This should
1262 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1263 dvl Pass jcr and db into db_escape_string() to enable better escaping
1265 kes Fix migration code to get correct Volume name with multiple volumes
1266 by skipping |. Fixes bug #936.
1267 kes Implement patch supplied by Landon to fix bug #944 where using
1268 TLS with bconsole uses 99+% of the CPU.
1269 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1271 kes Move patches into patches directory.
1273 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1276 ebl Using 'm' in bconsole will show messages like before,
1277 and not memory usage.
1278 kes Fix bug #935, and probably also bug #903 where files were not
1279 restored. MediaId was not properly set in JobMedia record after
1282 kes Suppress chown and chmod error messages if the FD is not running
1285 kes Apply Martin Simmons' patch that should turn off the new API usage
1286 when batch insert is turned off allowing building on older
1288 kes Add ./configure search in qwt-qt4 for qwt package
1290 kes Bacula is now free of 3rd party GPL copyrighted code!
1291 kes Remove idcache.c
1292 kes Add guid_to_name.c/h which replace idcache.
1293 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1295 ebl Detect if new PosgreSQL batch insert API is present.
1296 kes Correct incorrect mempool call causing Director crash. Occurs on
1297 systems without va_copy().
1298 sb Update spec files for 2.2.1 release
1300 kes Fix memory pool call in ua_output.c. bug #934.
1301 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1302 Add test program to fnmatch.c
1304 kes Integrate patch to README.vc8 from
1305 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1306 edit it to get it into Unix patch format.
1307 kes Implement mkpath.c to replace old FSF makepath.c
1309 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1311 Release Version 2.2.1
1313 kes Update POTFILES.in
1314 kes Cleanup a few underquoted AC_DEFUNs in configure
1315 kes Apply patch from Martin Simmons that adds a test for va_copy to
1318 kes Fix bug #921 by increasing the number of tries to create a new volume
1320 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1321 can be called multiple times. Implement a version for machines
1322 without va_copy() that gets a big buffer.
1324 kes Integrate more portable zone offset code into bsmtp.c
1325 Submitted by Attila Fülöp.
1327 kes Fix bad SD->FD return status reported by
1328 (James Harper) <james.harper@bendigoit.com.au>
1329 ebl Fix a bug in read_close_session which return random status
1330 thanks to James Harper
1332 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1333 and directory names during restore of single file/directories.
1334 kes Add sanity checks to .sql command when string is empty. Hopefully
1335 that will resolve Dirks Director crash.
1337 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1338 in the bsmtp chat subroutine when debug is >= 10.
1340 kes Fix Director crash when running bat SQL queries.
1341 kes Add David's notes on Item 8: Copy pools.
1343 kes Rework projects file to be current and ready for a vote.
1344 kes Enhance lex scanner error message.
1346 kes Tweak LICENSE file to mention BSD code.
1347 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1348 if specified on the ./configure.
1349 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1350 This class is intended to allow us to open a second bsock to the
1351 Director while in the restore subdialog.
1353 kes Fix configure to create bat Makefile before creating dependencies.
1354 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1355 kes Add a tooltip to the tray monitor.
1356 dvl Set the Director's PID file before dropping privs. This fixes
1359 kes Update AUTHORs file
1360 kes Increase the default max concurrent jobs to 20 in FD and SD to
1361 correspond with the default .conf files.
1362 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1363 some different, of the same file created by RN when porting the
1365 kes Rearrange some of the Win32 directories and the placement of the files
1367 kes Set DEVELOPER flag in version.h
1369 ========================================================================
1370 Release Version 2.2.0
1372 kes Apply a second doc patch from Marc.
1373 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1374 improves the tips section that discusses how to setup multiple
1377 kes Update bat README file.
1378 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1379 corrects a typo in the Recycle status check in db_find_next_volume().
1380 This will probably fix a number of annoying problems with multiple
1382 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1383 bnet calls -- no functionality change.
1385 kes Modify the Verify output to specify if files are missing on
1386 the Volume(s) or disk. Fixes confusion in bug #916.
1387 kes When more than one Volume is read in a migration job, the last
1388 Volume bytes reported are from the last read volume rather than
1389 the last written volume. Fixed. This fixes bug #910.
1390 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1391 It previously printed New Recyle flag is: no. This fixes bug
1394 kes Correct seg fault when switching tape drives during restore.
1395 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1396 be used until after 2.2.0 release.
1398 kes Remove fnmatch() in SD that permitted wild card specifications.
1399 This fixes bug #914.
1401 kes Fix %g in filename returned by SQL for browse tree reported by
1403 kes Fix configure so that it puts config.out in the cwd rather than
1405 kes Attempt to fix the locking problem reported by Eric in bug #906.
1406 kes Make berrno class to leave errno unchanged after constructor call.
1407 kes Make bnet_server use the heap rather than the stack to allocate
1408 its socket fd pointers to avoid a crash at termination. Problem
1409 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1411 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1412 and putting it in depkgs-qt along with Qt4.3.
1414 kes Rework code in acquire.c that switches drives for reading when
1415 the Media Type does not match. This should fix bug #906
1417 ebl Fix a director segfault during job setup #907
1418 kes Correct seg fault in postgresql when first operation returns no
1419 rows. Fixes Dirks File browser problem seg fault with bat.
1421 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1422 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1425 kes Implement PopUp YES/NO dialog for bat.
1427 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1429 kes Correct RunScript to terminate job in FD on failure.
1430 kes Change abort_on_error and AbortJobOnError to fail_on_error
1431 and FailJobOnError in RunScripts.
1432 kes Minor tweaks of code formating in RunScripts, principally to
1433 avoid depassing 80 columns.
1435 kes Eliminate one #ifdef Win32 in bsmtp
1436 kes Implement grow tool to grow a file for testing very large databases.
1437 kes Add big-vol-test to test Bacula seeking with > 5GB.
1440 kes Modify find_next_volume() to return all values in Media record.
1441 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1445 kes Update Release notes
1447 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1448 Warning, in previous beta version, all media get from scratch keep their
1451 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1452 This should fix bug #842. Made a note to look at removing the temp
1453 files at the end of the install.
1454 kes Add ability to mount and unmount a file device providing it is
1455 marked as being removable and has the appropriate mount and unmount
1456 commands defined in the Device resource. This fixes bug #830.
1457 kes When applying a storage override, release all previous storage
1458 definitions rather than just prepending the new storage.
1459 This should prevent a good deal of confusion.
1461 kes Implement ./configure search for qwt libraries.
1463 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1464 Win32 FD. This should fix bug #893.
1465 kes Remove an unnecessary beep in Win32 init code.
1466 kes Update copyright dates in Win32 executable about boxes.
1467 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1468 code with a BSD getopt.c and getopt.h.
1469 kes Remove sched.h from the Win32 compat directory -- not used.
1470 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1471 need to shut it down, do it through the services panel or the command
1473 kes Remove some inappropriate Bacula FSFE copyrights.
1474 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1475 kes Fix regress config non-portable test as pointed out by
1476 Florian Heigl <florian.heigl@gmail.com>
1477 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1478 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1480 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1481 Reported by Frank Sweetser.
1485 kes Fix client-only build.
1486 kes Integrate client-only fixes for bsys (initgroups) and conio from
1487 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1488 kes Make arguments to get_scratch_volume() in same order as other
1490 kes Rework the prune_volumes() subroutine so that after purging and
1491 no volume found in desired pool, it will check for a scratch
1492 volume. This prevents recycling the whole scratch pool.
1493 kes Add code to status storage to print boffset_t (largefile support).
1495 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1496 kes You now need a --with-qwt=<dir> to be able to build bat.
1497 kes Update src/win32/cats/bacula_cats.def to include the new
1498 db_get_query_dbids() call on Win32.
1500 kes Correct a problem when selecting a scratch volume and moving
1501 it to another pool that lost some columns.
1502 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1503 kes Enhance Autochanger error messages to include Volume and device name.
1504 kes Rework prune_volumes() code to take account of InChanger flag,
1505 and to handle recycling volumes going to the Scratch pool and
1506 current pool because the RecyclePool directive.
1507 kes Implement a better and more efficient db_get_query_dbids() to
1508 handle creating and passing back a list of DBIds.
1512 kes Start work on new more efficient DBId subroutine. First use
1513 will be for recycling volume to Scratch inchanger.
1514 kes Increase number of JobIds in pruning from 1000 to 10000.
1515 This to be replaced by above routine.
1516 kes Begin implementation of building Qt4 on Win32.
1517 kes Correct typo in fix I added for bad TLS shutdown.
1518 kes Pull 2.0.3 patches into patches directory.
1519 kes Update Release notes. Include qt-console in line count.
1520 kes Update Projects file.
1522 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1523 bug in migration code where a job that spanned two volumes
1526 kes Implement new BST_DESPOOLING blocked state. Change from locking
1527 during despooling in SD to blocking. This means that other threads
1528 can work with the device structure, in particular the reservations
1529 system while despooling.
1531 kes Fix return in reservation message queue that missed clearing
1532 the jcr lock (implemented 26Jun07 below).
1533 kes Rename a number of dev methods to make locking function names
1535 kes Document locking in lock.c. Move lock structures to new file
1538 kes Move reservations message lock to lock jcr only this
1540 kes Move main SD locking code into lock.c (new file).
1541 kes Update Win32 build to include lock.c
1545 kes Dirk committed the qwt library code for drawing graphs in bat.
1546 kes Tweak install of qwt so that it is integrated with ./configure.
1548 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1549 out by Eric (my typo).
1550 ebl Fix configure.in to get batch mode enable
1551 kes Return correct string from authenticate.cpp in bat when connecting
1553 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1554 spurious line drops when using TLS.
1555 kes Do not file reparse points when restoring a file that already
1558 kes Implement Windows reparse points -- similar to directories, but
1559 we do not descend into it. This is a first cut. They seem to
1560 be backed up, but restore is not yet tested.
1561 kes Remove restore_blocking in tls code when shutting a socket to leave
1562 it in blocking mode. Hopefully this will fix the encryption bug
1563 reported by Frank Sweetser.
1564 kes When opening a file for backup, tell the OS that we are going to
1565 read it sequentially -- optimization.
1566 kes Change variable names in authenticate_director() to not conflict
1567 with member names in bat. Caused great confusion with compiler,
1570 kes Queue openssl error messages in case of comm problem.
1571 kes Do shutdown() call if socket terminated.
1572 kes Remove some duplicated code in tls.c
1573 kes Move more of the bsock member variables into private and access
1575 kes Add Frank Sweetser's tls-test to the regression suite.
1577 kes Add Swedish sv.po file
1579 kes Don't print clock skew message in FD if less than 3 seconds diff.
1580 kes Add a bit of VSS info to status client.
1581 kes Implement a first cut of Vista VSS, using Win2003 code.
1583 Release: 2.1.20 beta
1585 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1586 loaded tape but uses first drive).
1587 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1588 This was indeed a Win32 issue.
1590 kes Simplify search of autochanger for in-use Volume.
1591 kes Fix exit condition of check for in-use volume. kes Remove
1592 inappropriate my_postgresql_free_result() in db_close()
1594 kes Fix bad return in FD when encryption signature not found.
1595 Probably caused a crash.
1596 kes Inhibit missing encryption signature error messages for
1597 file types where no signature computed.
1598 kes Correct inverted check on autochanger in reservation system.
1599 kes Tweak debug code in autochanger reservation.
1601 kes Add some additional locking in the cats directory in subroutines
1602 that modify packet variables called from batch insert.
1603 kes Rework how dcrs are allocated. new_dcr() can now be called
1604 with an existing pointer, and it will simply clean it up.
1605 This allows the reservation system to test various different
1606 devices, and will permit easy device changes.
1607 kes A bunch of changes all over to handle new new_dcr() calling
1609 kes Work more on the Volume management in the SD. Remember Volumes
1610 for tape drives and for autochangers (even virtual disk changers).
1611 kes When looking at the Volume list to reserve a drive, handle
1612 autochanger names correctly by interating through the changer
1613 devices. Also call the Director to see if a Volume is suitable
1614 for the current job.
1615 kes Fix some bugs in bscan. Make sure all media records are written.
1616 Make sure that valid JobMedia records are written for disk files.
1617 Previously they were completely wrong.
1618 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1619 that the URLs don't change and so that the developers will all
1620 work off the same copy. Rebuild from scrach.
1621 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1623 Release: 2.1.18 beta
1625 kes Fix seg fault in FD from incorrect digest size.
1626 kes Fix argument to non-OpenSSL crypto.c subroutine.
1628 Release: 2.1.16 beta
1630 kes Remove a few malloc()s from the encryption code.
1631 kes Use the class calls to bsock in filed/backup.c and restore.c in
1632 place of the old bnet_xxx code.
1633 kes Implement code that does an on the fly calculation of the
1634 signing digest during restore of encrypted files. It makes
1635 a best guess at the algorithm, and if it is not correct, will
1636 then revert to the old code which reads the file after it is
1638 kes Implement at least one missing crypto stream in stream_to_ascii()
1639 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1640 #877 where a reload with bad syntax causes Dir to exit.
1642 Cut: 2.1.14 beta (not released)
1644 kes Do not free a volume on a tape drive until another volume is
1645 mounted and read, or the autochanger unloads the volume.
1646 This should help the SD re-use volumes that are already mounted,
1647 and should fix bug #886.
1648 kes Apply patch from user brettedgar that allows gnome2-console include
1649 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1650 kes Apply patch from Lucien Weller that fixes day of week calculation
1651 because of DST flag problem. Fixes bug #887.
1653 kes Move find_next_appendable_volume() to after acquiring a valid device
1654 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1656 kes Unable to reproduce bug 872. However added additional testing for
1658 kes Bug #874 resolved by documenting SQLite limitations.
1659 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1660 kes Bug #881 resolved by removing typo in mtx-changer script.
1661 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1662 approval. Added a link to the wiki on the web page, and implemented
1663 a backup from http://paramount.ind.wpi.edu
1665 kes Fix update allfrompool to pass pool name.
1667 kes Convert to pure GPL v2 license.
1668 kes Fix sscanf problems reported by Peter Buschman that caused
1669 a bus error on Solaris.
1670 kes Rework (simplify) the select prompt in bat.
1671 kes Move get_jobid_from_tid() into lib and create a
1673 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1674 should definitely fix the problem of lost error messages in the
1676 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1677 kes Eliminate tcpd.h from the project. Enclose the #include from the
1678 library with extern C ...
1679 kes Add print of signal name when a signal is trapped.
1681 Release: 2.1.12 beta
1683 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1685 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1686 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1687 makes SQLit3 run 30 times faster, though a bit less safe.
1688 kes Implement --with-batch-insert in configure and detection of thread
1689 safe libraries. It is on by default, but turned off if no thread
1690 safe library (e.g. SQLite 2) is available.
1692 kes Fix Bacula PostgreSQL buffer overruns.
1693 kes Do better checking for NULL results returned from PostgreSQL;
1694 implement retry for failed queries; clear results buffer after
1695 failed query. Hopefully this will correct the PostgreSQL failures.
1697 kes Implement algorithm to handle only one appendable volume with
1698 Prefer Mounted Volumes = no.
1699 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1700 returned from a query.
1701 kes Make volume lock recursive.
1702 kes Implement an additional volume reservation algorithm that
1703 starts by considering all reserved volumes then uses the
1704 old brute force algorithm of searching the resources to
1705 find a suitable device.
1706 kes Add new reservations debug code and refine the old code.
1707 kes Update the win32/dll/bacula.defs file.
1709 kes Tweak reservations algorithm to permit a few more cases, i.e.
1710 volume reserved, but on different drive, ...
1711 kes Enhance SD status to include Pool and Media Type for drive in a
1712 more readable format (a bit longer).
1713 kes Fix PostgreSQL double free.
1715 kes Minor refactoring of restore decryption code.
1716 kes Add code to smartall.c to detect double free of a buffer.
1718 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1719 so that bsmtp will create a correct email address (mailbox only).
1720 kes Modify 'memory' command so that the buffers are listed as 'In use'
1721 to avoid confusion with Orphaned buffers.
1722 kes I reworked the OpenSSL include/lib flags to be handled in
1723 the standard Bacula way, which should fix bug #863 concerning
1724 non-standard OpenSSL libraries.
1726 kes Implement Help Browser window for bat.
1727 kes Fix reload bug that reset StorageId to zero.
1729 kes Fix TLS #ifdefing when TLS turned off.
1730 kes Ensure that when labelling a tape with Slot=0 that InChanger
1732 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1734 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1735 add DISTINCT (required by PostgreSQL).
1736 kes Implement BSOCK authenticate_director() method. Eventually will
1737 authenicate all daemons.
1738 kes Move several more functions into the BSOCK class.
1740 kes Add code to tell the OS that we no longer need a cached
1741 file that we were reading. In findlib/bfile.c. Also,
1742 only cache files that we are reading. Thanks to
1743 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1744 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1745 kes Implement script to automatically generate cats and dll .def
1746 files for Win32 dll.
1747 kes Update README.mingw32 to include new .def file generation.
1748 kes Correct typo in UTF-8 error message as reported by:
1749 jhernandez <julianhernandez@gmail.com>
1750 kes Add additional sm_check() code on debug level 1.
1751 kes Set default debug level to 1.
1752 kes Trap SIGABRT in attempt to get traceback.
1754 kes Reduce bat connect timeout from 30 to 15 seconds.
1755 kes More restructuring and implementing BSOCK class in place of
1757 kes Remove a few unnecessary malloc() tests in crypto code.
1758 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1759 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1760 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1762 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1764 kes Fix Verify InitCatalog. The attributes were not pointing to the
1765 correct saved location.
1766 kes Implement message callback so that GUI is sure to get all
1767 daemon messages. Currently displayed in a dialog in bat.
1768 kes Ignore SIGUSR2 (Bacula timer) in bat.
1769 kes Apply regress patch from bug #859 to allow regress to work
1770 with Solaris compiler.
1772 kes Begin adding TLS support to bat.
1773 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1774 clean up lex.c and make it more readable.
1776 kes Move more bnet functions into the BSOCK class.
1777 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1778 kes Complete change of berrno strerror() method to bstrerror()
1780 Release: 2.1.10 beta
1782 kes Cleanup incorrect email addresses in bsmtp.
1783 kes Make bat display initial messages rather than discard them.
1785 kes First cut of adding .mod to the run command.
1786 kes Implement auto display of messages in bat.
1787 kes Enhanced preferences to allow all Bacula output to be
1790 kes Try to make bsmtp date routines more generic.
1791 kes Fixed bug #856 autochanger documentation.
1792 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1793 kes Add new cats entry point so Win32 builds.
1795 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1797 kes Do better checking for the MySQL 64 bit libraries looking for both
1798 .a and .so libraries.
1799 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1800 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1801 kes Require the thread safe version of MySQL during configure. Thanks
1802 to Andre Noll for pointing this out.
1803 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1804 continuing in migration code.
1805 kes Apply implementation of tray-monitor font derived from gnome-console
1806 submitted by Andreas Piesk <a.piesk@gmx.net>
1808 kes Eliminate important memory loss in SQLite
1809 kes Fixed the batch insert MySQL thread specific data that was not
1810 being freed. See cats/mysql.c:db_thread_cleanup().
1811 kes Fix restore before command.
1812 kes Convert old hdr.name to name() in a few places.
1813 kes Implement update jobid command.
1814 kes Return all time_t dates in db_get_job_record()
1815 kes Stop watchdog in SD earlier.
1816 kes Put Pool just after Storage in please mount message.
1817 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1820 kes Update the po files.
1821 kes Fix Verify InitCatalog by making it cache attributes.
1823 kes Change name bacula-bat to bat for man 1 page to correspond to
1825 kes Check for client and store NULL pointers in status command. This
1827 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1828 kes Fix sign extended editing of %p.
1829 kes Clean out a little old #ifdefing in cats/mysql.c
1831 kes If time diff between DIR and FD is more than 600 seconds convert
1832 INFO message to WARNING.
1833 kes Implement heap size display in status for all daemons.
1834 kes Attempt to fix MySQL db open memory loss (not successfull).
1835 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1836 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1837 Query. This looks like a MySQL but but by doing extra releases,
1838 the memory goes away. This should fix bug #847.
1840 kes When backup fails, cancel SD before waiting for sd termination.
1841 kes If SD is waiting for FD to connect during cancel, wake up the
1843 kes Fix fsf code so that errno is correctly reported.
1844 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1846 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1847 so that Bacula doesn't later stumble into a seg fault.
1848 kes Use the term Restore Client in the restore Job report.
1849 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1850 the original job's FileSetId.
1851 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1852 spooling in migration jobs. Not yet tested.
1853 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1854 reading conf file from a pipe. However, do it with open_bpipe()
1855 rather than popen. Not yet tested.
1857 kes Fix an ugly bug where the VolCatBytes were getting updated
1859 kes Implement bconsole memory command that prints current memory
1860 usage, plus smartalloc dump.
1861 kes Clarify some error messages in backup, admin, and migrate.
1862 kes Shrink label dialog to smaller size.
1863 kes Invert Cancel OK buttons on restore to be OK Cancel.
1864 kes More strerror() to bstrerror() conversions.
1866 kes Start implementing bstrerror() in place of strerror().
1867 kes Stripping path -- seems to work.
1869 kes Prevent door and port files from being restored (mostly
1871 kes Free an unreleased buffer in compat code.
1872 kes Change console Job name from *Console* to -Console- to eliminate
1873 Win32 filename problems. Put Win32 path separator when creating
1874 Console file. This fixes bug #846.
1875 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1877 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1879 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1880 to force Win32 error message.
1882 kes First cut strip path. The data should be passed to the FD,
1883 but nothing is done with it yet.
1884 kes Enhance the digest and signature routines in the crypto
1885 library to accept a JCR and to use it to print error messages
1886 so that they will go in the Job report rather than the daemon's
1888 kes Simplify some of the verify signature code.
1889 kes Simplify a few of the alternative returns in the signature
1892 ebl Use only POSIX regex instead of GNU regex in breg.c for
1893 File relocation. It fix broken freebsd compilation.
1894 kes Convert all other Dir files to use new ua class message
1896 kes Tentative fix for missing digest signature in bug 807.
1897 kes Correct handle problem in new win32_ftruncate routine.
1898 kes Convert ua_purge.c and ua_update.c to use new ua class
1899 message routines for bat.
1901 kes Correct incorrect installation of LICENSE in Win32 installer.
1902 kes Display LICENSE at the beginning of the Win32 install.
1903 kes Attempt to correct the need for the png files to be installed
1905 kes Reapply my bat.conf install script in qt-console. I think I
1906 editted bat.pro instead of bat.pro.in and it was lost.
1907 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1908 the /var/lock/subsys for subsysdir. Also corrects typos in the
1911 kes First cut update job.
1912 kes Correct configure to include qmake of src/qt-console directory.
1914 kes Make restore job yes/mod/no print in one command so GUI works.
1915 kes First cut implementing backup and restore client.
1916 kes Correct editing in Verify output that caused a seg fault.
1918 kes Insure that bat.conf is not overwritten during installation.
1919 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1920 while I was implementing migration in March 2006 !
1922 ebl Cleanup file relocation, using char *RegexWhere instead of
1923 char *where + bool where_use_regexp
1924 kes Update some manpages and add bat manpage.
1925 kes Make a first cut at converting bacula.spec.in for bwx-console
1927 kes Apply patch from John Goerzen to add hostname as fourth argument
1928 to make_catalog_backup script.
1929 kes Fix typos I introduced into bsmtp.c
1930 kes Make pm_strxxx() routines handle input of NULL pointer. This
1931 is to protect from NULL pointers returned from SQL databases.
1932 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1933 kes Add more debug to FIFO code -- fix fifo regression test.
1935 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1936 kes Add thread timer to bnet_connect() to break from OS if wait time
1939 kes Update Win32 build to include new files, new symbols, and
1941 kes Implement socket level heartbeat (tcp_keepidle)
1942 ebl Commit File relocation patch
1943 kes Make bat have 'make install' target.
1944 kes Warn during install if old gnome-console binary found.
1945 kes Warn during install if old wx-console binary found.
1946 kes Add -8 option to bsmtp command line to add content type utf-8.
1947 Fixes bug #809. (Character coding problem in bsmtp).
1948 kes If < is found in target (from, to, cc) then do not enclose the
1949 target in < > in bsmtp. Fixes bug #772 (malformed address).
1950 kes When printing certain items in dbcheck, stop after 300000.
1951 Fixes bug #822. (dbcheck loops).
1952 kes Incorrect status in Dir after waiting for mount with poll set.
1955 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1957 kes Print waiting to reserve a device every 5 mins.
1959 kes Don't call close_part in label.c if tape and relabel.
1960 kes Don't free volume if busy in close() -- should help with
1962 ebl Fix #824 RunScript bug (After script could be execute twice)
1963 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1964 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1965 Add a regression script to test RunScript
1967 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1970 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1971 deprecated. No additional bugs will be fixed, and they will be dropped
1972 in a future release (probably 2.4.0).
1973 kes Change name of wx-console to bwx-console to make it more Bacula
1975 kes Change the name of gnome-console to bgnome-console to make it
1978 kes Some time in March, a Feature Request with patch from Jorj Bauer
1979 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1981 The ability for the director to validate a Client (FD) CN against
1982 an arbitrary set of patterns rather than the hostname, with
1983 A new 'TLS Allowed CN' set of directives which are implemented
1984 in the Client resource. Then pattern matching is used in place
1985 of hostname matching against the Certificate's CN. As an example, we
1986 have certificates which (a) use a local CA, and (b) have a CN of the
1988 kes Add new/changed entry points to Win32 build
1989 kes Create unaccepted-projects for projects that are not accepted.
1990 kes Simplify locking in the reservations system.
1991 kes Add more debug code in reservations.
1992 kes Make sure error condition on reserving a volume is handled correctly.
1993 kes Correct handling of volume_in_use.
1994 kes Correct handling of initializing a device.
1995 kes Move handling of broadcasting releasing a device into release_device().
1996 kes Correct attaching dcr to dev so that it is only done if device
1997 is properly initiated.
1999 kes Locking debug level tweaks in SD.
2000 kes Tweak new Volume code.
2002 kes Add exec external-command [wait-seconds] to bconsole. This
2003 executes the external-command. Note! normally external-command
2004 should be enclosed in double quotes.
2005 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
2006 it should normally be off in a production system.
2008 kes Implement die command for SD so that we can force it to dump.
2009 kes Implement SD lock debug code.
2010 kes Implement new algorithm for keeping Volume list in SD. It
2011 is now owned by the device.
2013 kes Implement new code for freeing in use volumes that should
2014 resolve if not all, some of the problems of multiple drive
2015 tape conflicts described in bug 801.
2017 kes Fix gui/bacula-web/images files in svn.
2018 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
2020 ebl Fix a bug in batch mode (in string escape)
2021 kes Correct migration prune SQL typo that crept in in a
2022 recent 2.1.x change.
2024 kes Move bnet_despool() into class in bsock.c
2025 kes Modify job report to include director name and Build OS.
2026 kes Move drop root privilege and check_catalog() before fork.
2027 kes Add update database scripts (version 9 to 10) to updatedb directory.
2029 ebl Check size and age of each file after its backup to see if
2030 it has changed during backup, if 'checkfilechanges' is set.
2031 The FD will do an extra check (stat(2)) after
2032 each file backup. mtime, ctime and size are compared with
2033 'before backup' information. If time or size mismatch, an
2034 error message will be generated. You must upgrade FD to use it.
2036 kes Make database name and user configurable
2037 --with-db-name=xxx --with-db-user=xxx
2038 kes Add back database type to message.c for debugging.
2040 kes Implement dir_sql() which issues an SQL query.
2041 kes Modify bat medialist to use dir_sql() and do some minor C++
2042 formatting as well as eliminating a number of pointers, simplifing
2045 kes Fix some of the mtx-changer grep commands for tape label readers.
2046 kes Convert a number of bsendmsg into the appropriate send/warning/error
2047 message class calls.
2048 kes Suppress the using database message in the .sql command.
2049 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
2051 kes Add context menu for floating a window.
2052 kes Some minor cleanup and name changes in qt-console
2053 kes Add doing mt setblk 0 in Win32 mtx-changer.
2054 kes Apply Martin's bug fix to move definition of ENODATA for
2056 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
2057 sqlite2 and sqlite3.
2059 kes More pruning cleanup.
2060 kes Turn on wait_for_drive by default in mtx-changer.
2061 kes Turn on Batch insert code by default as it now passes regression.
2062 kes Add ./configure --enable-bat to enable building of Bat.
2063 No install yet though.
2065 kes Implement a new .sql command for bat.
2066 kes Implement code to turn off pruning in obtaining the next volume.
2067 Pruning is turned off for the status dir command, but turned on
2068 for SD requests and for the list nextvolume command.
2070 kes Correct Qmsg() that was not updated correctly when committing a
2071 previous change (probably the recent TLS patch).
2073 kes Write new subroutine is_volume_purged() that explicitly checks
2074 if the Volume is purged, and if so marks it as such. This should
2075 resolve problems reported about needing to mount twice to recycle
2077 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2078 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2079 amount of duplicated code.
2080 kes Do volume pruning only for the Media Type desired (reduces pruning time
2081 if multiple Media Types are in the same pool).
2082 kes Implement more detailed info in the Job report for the Bacula version
2084 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2086 ebl Add bbatch tool to bench database and insert mode.
2087 Fix sql quote stuff in batch mode
2088 Fix sql stuff for mysql
2090 kes Correct problems with am/pm scheduling. Fixes bug #808.
2091 kes Implement new prunning code that prunes up to 1000 jobs at
2092 the same time. The same technique can be applied to a number
2093 of other prune/purge subroutines.
2094 kes Add an insanity check when starting a new tape job to ensure
2095 that the tape position has not been changed. If so fail the
2097 kes Fix Win32 build for dlls to add the folllowing:
2098 src/lib/bsock.c -- new file with new entry points
2099 src/lib/dlist.c -- new entry points
2100 src/cats/sql_create.c -- new entry point
2101 src/cats/sql_cmds.c -- new DATA item exported
2103 ebl batch mode cleanup bscan-test is ok now.
2104 kes Implement SD code to check length of disk volume before appending.
2106 kes Correct return status on db_batch... routines.
2107 kes Add call to db_write_batch_file_records() to migration code.
2108 ebl Fix AfterJob timing
2109 kes Move the checking of the database in initializion of the Director
2110 to after we drop privileges. This avoids the need for both root
2111 and bacula access to the DB.
2112 kes Correct a misplaced variable definition in src/filed/backup.c
2113 kes Correct how the new batch insert db_create_attributes_record()
2114 uses the arguments. Caused a seg fault in bscan.
2115 kes Implement lock() and unlock() methods in DEVICE class.
2116 Implement block() and set_block(xx) methods in DEVICE class.
2117 kes Modify bnet_connect() so that it uses time() to check for the
2118 wait time expiring (on some OSes, some system calls may not
2119 return immediately).
2120 kes Modify Verify to obtain the previous JobId when it is actually
2121 running rather than at schedule time (as it was in 1.38.x).
2122 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2124 kes When checking pid in pid file, continue running if the pid is
2125 the same as ours. This occurs on IRIX after a system crash.
2128 kes Extend new GUI API.
2129 kes Make the ua structure a class, and implement send_msg(),
2130 error_msg(), warning_msg(), and info_msg().
2132 kes Apply fix from for building wx-console on the Mac from
2134 kes Implement new select mechanism for GUI programs.
2135 kes Reorganize initialization of stackedWidgets in bat.
2137 kes Add updated nagios plugin supplied by Christian Masopust.
2139 kes More bat implementation.
2140 kes File migrate bug with Pool Occupancy using mediaid instead
2141 of jobids. Fixes bug #795.
2142 kes Fix orphaned buffers in filed backup and verify due to
2143 crypto buffers not freed during errors. Fixes bug #789.
2144 kes Extend new GUI api code to tree commands.
2145 kes Ensure that tree and dot commands check console ACLs.
2146 kes Permit marking directory with trailing slash.
2147 kes Allow 20 console connections (instead of only 10).
2149 kes Add smartctl call to bacula-sd.conf as an example of getting
2152 kes Modify jobq.c to let simultaneous restore jobs run. This may
2153 cause them to fail if they cannot get a drive.
2154 kes Add Client Connect Wait to Storage daemon to permit users to
2155 modify the time the SD waits for a FD connection.
2157 kes Correct virtual changer check which was backwards. This caused
2158 volumes to be unloaded into slots already occupied.
2160 kes Apply Command ACL filter to JobId list in restore command.
2161 kes Correct typeo in var.c patch.
2163 kes Don't let Bacula prune File or Job records for the current Job.
2164 kes Fix variable substitution pad + inc bug reported (with patch)
2167 kes Correct SQLite log table index as reported by Luca Berra.
2169 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2171 kes Begin implementing new comm signals for API.
2172 kes Fix a few places in lib/message.c where the open fd may
2174 kes Continue implementing lib/bsock.c (real class). Make jcr,
2175 who, host, and port private. There are new methods to access
2176 them for non-class use. This required touching a number of files.
2178 kes Add LANG=C to autoconf/randpass so it works with languages other
2179 than English. Fixes bug #788.
2181 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2183 You will not be able to generate Include/Exclude list any more.
2184 It will be fixed soon.
2185 If you want to use this, you can apply
2186 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2188 kes Restore of sockets created false error messages because Bacula
2189 no longer restores sockets, but the code was still trying to
2190 set the attributes on a non-existent file. Reported by a user.
2191 ebl finish RecyclePool feature
2192 Media will takes Pool.RecyclePool
2193 when moving from Scratch to a Pool or when user will do
2194 update volume=xxx frompool
2195 To use it, add RecyclePool = aPool to your Pool resource
2198 RecyclePool = Scratch
2202 kes Expand new BSOCK class adding signal() and new BNET signals.
2203 kes Begin enhancing the dot commands adding a new API function
2204 that returns more information and will make it easier
2205 to interface to the Director from a program.
2207 kes Make DEVICE fd private. Its new name is m_fd, and can be
2208 obtained with dev->fd() outside the class. This is the
2209 first of many DEVICE members to be made private.
2210 kes Implement Michael Renner's idea on having a virtual disk
2211 changer. I made some minor modifications (e.g. I did not
2212 implement the Virtual Changer directive, but simply set
2213 the Changer Command to an empty string.
2215 kes Implement a BSOCK send() method that writes the whole record
2216 in a single write() request rather than in two.
2217 ebl add update volume=xxx recyclepool=yyyy
2218 volume takes recyclepool from pool when using update volume=xxx from pool
2220 kes Fix encryption deblocking bug, which caused some restored files
2221 to be truncated. This fixes bug #763.
2222 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2223 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2225 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2226 ebl Use btime_t instead of uint64_t in media patch.
2228 kes Optimize the use of the database a bit in the Status dir command.
2229 Only open it when needed, ensure that if any previous database
2230 was opened, it is closed.
2232 kes Correct VolCatBytes bug from media patch.
2233 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2234 in the case of orphaned records.
2235 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2236 and File records in 300K chunks to be more efficient. This
2237 idea came from Juan Luis Frances (if I remember right).
2238 kes Apply Eric's scratch patch that moves a purged Volume to
2239 the RecyclePool. Question: how is RecyclePool set? what
2240 happens to the ScratchPool?
2241 kes Apply Eric's media patch that collects read/write media
2242 times as well as byte counts. This patch requires a
2243 simultaneous upgrade of the DIR and SD. Note, there
2244 should be some way to turn off timing. I'm not sure
2245 times are in Bacula units.
2246 kes Apply Eric's batch-insert patch.
2248 kes Update projects list.
2250 kes Implement Include/Exclude file lists in FD as dlists using
2251 the new dlistString class. This permits efficiently having
2252 large include/exclude lists and completes project Item 25.
2253 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2254 console is authorized to cancel the job. This fixes bug
2256 kes Modify SD so that the VolCatJobs medium record is updated
2257 at the beginning of a Job rather than the end. This
2258 fixes bug #775 where exceeding MaxVolJobs caused jobs
2260 kes Added a mutex around getting and setting Volume information
2261 so that multiple simultaneous jobs will single thread.
2263 Switch to using Subversion
2264 kes Remove src/pygtk-console/ from configure
2266 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2267 plus the entrypoints.
2268 kes Apply patch supplied that corrects debug print
2269 in canceling jobs for max run time. Supplied as
2270 part of bug #621, which was previously fixed.
2272 kes Test on job_canceled() and sd_msg_thread_done inside
2273 loop starting the message thread to avoid a race condition.
2275 kes Remove rl_catch_signal from console.c as it conflicted
2276 with the header definition. Fixes bug #765.
2277 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2279 kes Clarify some stored/acquire messages to indicate if the
2280 problem is with read or append.
2282 kes Fix memory leak with storage ids in cats/sql_get.c
2283 kes Terminate watchdog earlier to avoid reference to released
2284 memory -- reported by Jason Austin.
2285 kes Move closing the database from jobq.c to the director daemon
2286 termination routine. This fixes memory leaks for shadow jobs
2287 (i.e. migration jobs).
2288 kes Free up the unique jobid chain items in migrate.c. This fixes
2289 a memory leak problem.
2290 kes Convert some ugly looking for statements to use foreach_alist
2291 in findlib/find.c. This will facilitate converting the structures
2292 to use dlist (for large include/exclude lists).
2293 kes Fix a bug in the btree.c and btree.h routines, then rename them
2294 rblist and add them to be built in src/lib. Include some new
2295 methods written by Rudolf Cejka that make the code more readable
2296 (hides some of the ugly casting).
2297 kes Add set_next() and set_prev() methods which make the code much more
2298 readable. Also add a new dlistString class that facilitates storing
2299 strings in dlists. To be used in the large include/exclude lists.
2300 kes Make some trivial modifications to lib/tree.h that use rblist
2301 rather than dlist for storing the tree links. This was suggested
2302 by Rudolf Cejka. The result of this is that the restore tree now
2303 uses red-black binary trees rather than simple linked lists. This
2304 should give rather dramatic speed improvements for directories
2305 contining large numbers of directories/files (more than 10000).
2307 kes Fix maxruntime bug #621.
2309 ebl Implement the include JobID in spool file name project.
2310 kes Reorder projects file in order determined by Jan 2007 vote.
2311 kes Implement item #12 on project list -- quick release of FD by
2313 kes Fix open of SQLite3 db where user does not have write permission
2314 so that DIR does not crash. Fixes bug #761.
2316 kes Add back missing @ in Win32 Makefile.
2317 kes Change 'Device not configured to autolabel' from INFO
2319 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2320 which should restart an indefinite # of times.
2321 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2322 other DIR specifications.
2324 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2325 Fix path quoting in SQLite scripts.
2326 Fix problems with SHGetFolderPath.
2328 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2330 kes Fix Job restart on error bug that promotes an Inc to a Full
2331 backup. This should fix bug #755.
2332 kes Add qt-console and first cut of code.
2336 kes Fix Bacula->Documentation link on Win32 to point to index.html
2337 instead of bacula.html. Fixed bug #750.
2338 kes Return JobId in db_get_job_record() when JobId==0. This should
2340 kes Do not release source pointers when restarting a failed job.
2342 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2343 This *should* fix bug #747.
2344 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2347 kes Modify USTORE constructor to set an empty store_source string,
2348 and don't copy the store_source string in a cancel. Hopefully
2349 this will fix Arno's seg fault, bug #744.
2350 kes Add back code to disable conio in configure. Fixes bug #743.
2351 kes Correct the Options scanner in the FD to correctly handle
2352 SHA1 option, which was eating the next option. Reported by
2354 kes Add code to indicate when the SD is spooling, spool wait, and
2355 despooling as requested by Alan Brown.
2357 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob