1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
31 separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
36 kes Add message to migration job when the target job is already migrated.
37 This closes bug #1129.
40 kes Raise some restore debug levels.
41 kes Replace off_t by boffset_t where ever I found it.
43 kes Define a machine dependent ioctl request type for use with
46 kes When a migration job actually runs, re-check the Job record
47 and skip if the job is already migrated. This should
48 significantly reduce the problems with bug #1129.
50 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
51 turn off glibc checks that prevent getting good dumps.
52 kes Implement console 'wait mount' command. Doesn't yet work.
53 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
54 kes Break the do_swapping into do_unload, do_swapping, and
55 do_load. It is much more logical that way.
56 kes Implement a set_dcr_from_vol subroutine in acquire.c for
57 reading volumes. This allows the dcr to be refreshed after being
58 zapped when the wrong volume is mounted.
59 This should fix bug #1126 -- During multiple tape restore, bacula
60 does not ask for physical tape change, but rereads same tape
62 kes Apply patch submitted for bug #1107 with a small modification.
63 This fixes a bug where bcopy copied too many records.
64 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
66 kes Make the default bat restore Pool be Any. This fixes bug #1118.
68 kes Remove debug statement that crashes the SD at the end of
69 a tape during restore. Fixes bug #1125.
71 kes Implement Win32 bat changes made to Branch-2.4
73 kes Tweak separator command in console to start disabled and
74 allow defining no separator character. Also make code a
75 bit more fault tolerant.
76 kes Make btraceback write the traceback to the working directory
77 before attempting to mail it.
78 kes Add a RFC to Projects.
80 kes Attempt to implement a kludge to make Qt work with bat
82 kes Setup rstorage correctly. Virtual backups are working.
84 kes Move setting JobLevel and JobType into a method, which should
85 allow completing Virtual Backups.
86 kes Fix verify jobs to work again.
88 kes Virtual Backup tweaks -- it is close to working.
90 kes Ensure that SD tried to mount a volume not in an autochanger
91 at least once before asking for operator intervention.
92 kes Make SD aware of Virtual Backup jobs.
93 kes Add VirtualFull for bat.
94 kes Changes to get read storage correct for Virtual Backup.
96 kes Remove old code from label.c
97 kes Split display_display_info() out of write_bsr_file()
98 kes do_vbackup_init() working -- i.e. bootstrap file built.
99 kes Change Bacula trademark owner from John Walker to Kern Sibbald
100 kes First non-working cut of vbackup
101 kes Correct FD heartbeat code to use volatile variable accessed by
103 kes Zero thread id with memset if on Win32 in case it is a struct.
104 kes If cannot create JobMedia record, continue to try to write eof
105 and clean up in block.c
107 kes Add code to interface OpenSSL to new Win32 pthreads code which
108 used a structure for thread_t.
110 ebl tweak bat for win32 compilation
112 ebl Remove tokyo cabinet from the source
113 ebl Update configure/autoconf to support berkeley DB
114 ebl Add a sort to db_get_file_list() to improve bsr construction time.
116 kes Add a mtx-changer.conf file that is not overwritten during
117 an upgrade. It fully configures the mtx-changer script.
118 kes Clear in-use bit on vol when unused while swapping.
120 kes Remove sleep at end of ./bacula
121 kes Clear hash packet for hardlinked files correctly. This corrects
122 a long standing bug where hardlinked files selected individually
123 would occasionally not be restored.
125 kes Apply Eric's patch to ensure that autoprune does not return
126 a Volume not in the autochanger unless requested to do so.
127 kes Correct bat restore display of multiple drives. This fixes
129 kes Do find_a_volume() each time an unload is done. This
130 fixes the failure of maxvol2-test.
132 kes Add some SD debug code.
133 kes Do find_a_volume() each time an unload is done.
134 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
135 and adds --with-db-port to ./configure.
136 kes Use Qmsg() in job.c watchdog callback.
138 kes Release main control rwlock if ABORTing.
139 kes Make watchdog connect timeout queue messages rather than sending
140 directly to avoid lock conflicts with the real thread.
141 kes Add const char in dbd.c to avoid compiler warnings.
142 kes Fix python compiler string warning. Note, IMO the GNU C++
143 compiler guys have made a *very* bad change to their compiler.
144 They now force all strings to be 'const' unless you explicitly
145 cast them, which is extremely ugly and ruins nice code as well
146 as creates a lot of useless work.
148 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
149 mt. This fixes bug #1116.
150 kes Add const in python files to reduce compiler warnings.
151 This may have to be backed out because of later compiler
153 kes Fix failure of 2drive-concurrent-test. Always read label;
154 clear_unload() only after drive is defined in acquire_for_read().
156 kes Generally clean up the manual tape loading code. The main
157 conceptual change is that when a volume is marked to be unloaded,
158 its volume name is retained, and it is only marked as unloaded
159 when either the autoloader says it is unloaded or another tape
160 is read on that drive.
162 kes Add debug code and refactor subroutine in stored/mount.c
163 kes Fix format problem in bscan output reported in bug #1105.
164 ebl Fix get_next_volume_for_append logic with autochanger
165 - use pruned volumes if found
166 - don't reset the inchanger flag after getting a recycled volume
168 Fix recycle_oldest_purged_volume to take InChanger flag in account
170 ebl Add mmap/unmmap implementation for tokyodbm under win32
172 kes Make first step toward eliminating globals from config
173 scanning. Also should be a workaround for FORTIFY_SOURCE
174 GNU C bug -- fixes bug #1042.
176 kes Apply duplicate job tests to restarted jobs.
177 kes Copy more data when restarting a job so that run
178 overrides are kept. This should fix bug #1094.
180 kes More word alignment cleanup.
181 kes Fix bug where SD did not ask operator if the device could not
182 be opened. Reported by Eric.
184 kes Add dbuser to DIR conf file (replaces user).
185 kes Add --with-db-password to ./configure
186 kes Fix regress to handle db_password.
187 ebl Add new "status storage slots" that list autochanger
189 ebl Update vtape driver to compile only under Linux.
190 ebl Fix a bug when restoring with a wrong mediatype.
192 kes Eliminate ints from conf files and structures to avoid
193 word alignment problems
195 kes Fix bug reported by Scott Barninger where the bacula script
196 refers to scripts in the wrong directory. Needed to meet the
197 requirements of recent FHS location changes.
198 ebl Disable vtape for FreeBSD.
200 ebl Modify disk-changer to check if slot contains something before
203 ebl Fix vtape on win32 and debian.
204 ebl Fix autoselect patch (cause segfault).
206 ebl Fix autoselect option broken for a while. Fix #1089. Need some
207 work with StorageId to be able to use a particular drive in a
210 ebl Rename vtape to vtape.
211 ebl Update vtape driver.
213 ebl Modify vtape driver to avoid sparse file.
214 kes Add make clean of qt-source directory during ./configure
215 kes Store last block number written to tape in DEVICE and
216 use it for testing for correct last block on EOT.
218 Release Version 2.4.0:
222 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
223 This fixes bug #1095.
225 kes Add create_postgresql_database.sql to Win32 installer. Should
226 fix problem reported by Juilio Monteiro.
227 kes Get correct slot when auto unloading a device. This fixes bug
230 kes Fix multiple media restore.
231 kes Make DEVICE Slot private and access it via a method.
232 Allows better control over when it is set and cleared.
233 kes Fix possible seg fault if SQL error.
235 kes Add Martin's fixes to argument scanning for the estimate
236 command. This fixes bug #1093.
237 kes Add debug code to SD.
238 kes Fix renaming a Volume, which used the wrong Volume name.
240 kes If operator has rewind tape, print warning, release tape and
241 try once more. If tape is positioned somewhere, something went
242 wrong, so mark the tape in error and try once more. Previously
243 this error was fatal, now it produces an error message.
244 kes Ensure correct volume name displayed during restore
245 kes Ensure that Volume is mounted for restore.
247 kes Fix a few more Coverity reported problems.
249 kes Apply Allan Black's status dir job count patch.
250 ebl Add information about IMPORT/EXPORT slots in mtx-script.
251 kes Enhance a couple of SD debug messages.
252 kes Tweak unload flag setting and ensure it is set during swap.
254 ebl Fix #1091 about bad output in estimate command.
256 kes Modify autochanger locking to attempt to avoid race
258 kes Make sure device not busy before doing label command.
259 kes Display open() errors except when polling. Previously too
260 many were suppressed. This should fix bug #1070.
261 kes Fix Win32 reparse points. Bacula will not recurse into any
262 reparse point directory, including mount points, unless the
263 directory is explicitly mentioned at the top level (same as
264 with Unix). A file that is linked to another file will be
265 backed up -- much as Unix does for hardlinked files.
266 This fixes bug #1041.
268 kes Remove double quotes from ChangeLog and ReleaseNotes
269 kes Remove StorageId test when pruning and recycling (Eric's changes).
270 kes Remove old form of locking when getting volumes -- causes deadlock.
271 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
272 the name unique and to eliminate compile time error.
273 kes Add accurate.o to Win32 FD Makefile
275 kes Fix cats dll build on Win32 after db_update_job_end_record
276 calling sequence change.
277 ebl Switch to tokyo dbm instead of htable in accurate code
278 ebl Include tokyo dbm to bacula source tree
280 kes Fix buffer overruns detected by Coverity.
282 kes Tweak joblog display.
284 kes Implement --without-qwt
285 kes Fix layout of restore tree dialog
286 kes Add configure bat QWT libraries, so that bat can be built
287 with or without the QWT libaries.
289 ebl Add dummy tape driver for regression tests.
290 kes Make sure we unload the right slot when swapping.
292 kes Add debug times, reduce size of two-pool-changer test
294 ebl Tweak autoconf scripts for vtape
296 kes Improve SD reserve debug code.
297 kes Testing an improvement to free up volumes no longer in use.
299 kes Rework SD acquire for read to handle autochanger Volume
301 kes Implement regression that explicitly tests swapping a Volume
302 from one drive to another.
303 kes Enhance disk-changer to detect most error conditions.
304 kes Fix SD code so that it properly swaps a Volume between drives.
305 This fixes bug #1083.
307 kes Apply libdbi patch from Joao Freitas for regress and for
308 Bacula trunk. Regress now works with libdbi. Nice.
309 kes Apply .nobackup patch from bug #1077 submitted by
311 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
312 name into jobs cloned via the run directive.
314 kes Prevent a Volume that is being swapped from being freed from
315 the volume list. This will most likely fix, at least partially,
317 kes Fix strippath so that it does not get a buffer overrun and crash FD.
318 This fixes bug #1078.
319 kes Remove 50 millisec wait in SD that broke debugger.
320 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
321 that a job may run, counted from when the job was scheduled.
322 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
323 a job may block waiting for a resource, counted from when the job starts
324 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
325 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
326 that implements multiple commands per line in the console when using
327 readline. Modify the default to use a semicolon as the command separator.
329 ebl Fix SQL query in migration code.
330 ebl Make accurate mode with hash disk pass regression tests
332 ebl Implement first cut of accurate backup with hash disk.
334 kes Force unload of volume when wrong volume mounted in SD.
336 kes Fix bat seg fault at termination.
337 kes Add Bacula generated version to bat about box.
340 kes Experiment with allowing multiple read jobs.
341 kes Move final volume swapping code to DCR method and
342 call it from acquire_for_read().
343 kes When wrong volume is mounted during read, unload_autochanger.
345 kes Integrate the libdbi changes from Joao Henrique Freitas
347 kes Stop searching for Volumes in SD askdir if DIR returns the
348 same volume name twice in a row.
349 kes Close bat console windows first to eliminate error message
352 kes Tweak the swap Volume from one drive to another code so that
353 it now seems to work.
354 kes Resolve several problems with recycling that broke the new
355 code (these problems are in 2.2.9 as well).
356 kes Remove the volume lock when calling the sysop code.
357 kes Don't mark a reserved volume with no writers as unused otherwise
360 kes Rework class structures for VOLRES, DCR, and DEVICE to make
361 the method names a bit more logical, and for more logically
362 handling the responsibilities.
364 kes Remove redundant code in terminating the scheduler that just
365 causes a seg fault in many cases.
366 kes Cleanup releasing a volume and make it a DCR method.
367 kes Improve algorithm for detecting pre-reserved volume and
370 kes Tweak volume swapping code so it works.
371 kes Correct name overloading in mount.c
372 kes Replace released flag in VOLRES with reserved and add access
373 methods for the VOLRES class.
374 kes Prevent volume from being released while being swapped.
375 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
377 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
379 kes Refactor parts of stored/mount.c
381 ebl Add sanity checks for VolWriteTime and VolReadTime
382 ebl Take care of bad clock changes while computing VolWriteTime
383 and VolReadTime. This should fix or limit #1066
384 kes Correct error string numbers in dird/catreq.c
385 kes Restructure reserving, acquiring, and mounting volumes. Calls to
386 autochanger are deferred for mount.c -- simplifes the code.
388 kes Do not prune any running job. It just fails the job.
389 kes Lock the volumes when changing dev->reserved_device and marking
390 the volume unused otherwise the device can get reserved by
391 another job before the volume is released, thus blocking it.
393 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
394 kes Fix bug #1063, reuse of freed ptr in list nextvol.
395 kes Release regex compile buffer in filed/job.c
396 kes Add proper type of const char in sql_create.c
397 kes Turn off debug in daemon termination routines
398 kes Move free_volume_list() before devices are freed in stored.c
399 kes Fix reference to uninitalized stack variables in bregex.c.
400 This should correct bug #1067.
402 kes Fix possible seg fault in SD when freeing a volume entry.
404 kes Implement unload_dev() before swap device.
405 ebl Add statistics prunning with option and menu
406 kes Separate unload_dev() from unload_other_device() in autochanger.c
408 kes Apply patch from bug #1069 that corrects spurious error messages
409 when ACLs enabled on SGI but no ACL exists.
410 ebl Fix small segfault in bacula-sd when debug level is 500
411 kes Modify run_program() and run_program_full_output() to use
412 call by reference for the results string. This corrects a long
413 standing problem where the address of the string may be changed
414 in the subroutine but not in the calling program.
416 kes Re-enable code to remember last volume mounted on a non-tape
418 kes Add patch supplied in bug #1068 that fixes a SD crash when using
419 a Virtual autochanger.
420 kes Generate correct JobMedia records during spooling/despooling when
421 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
422 <tih@hamartun.priv.no> for excellent analysis and testing.
424 kes Tweak hash algorithm for htable using Martin Simmons idea
425 for doing a circular shift.
426 kes Remember what volume is in VTLs (previously turned off for
428 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
429 pointed out some problems in creating JobMedia records during
430 spooling with concurrent jobs. Fix the problem by updating the
431 start file position before despooling and generate a jobmedia
432 record at the end of despooling.
434 kes Fix handling of JobMedia records during spooling and when a
435 Volume is changed without actually writing data to the Volume.
437 kes Rework certain SD locking based on gdb tracebacks of deadlocks
438 sent by Eric. This code now uses only the volume_lock() rather
439 than the reservations lock when at EOM and acquiring a new
441 kes Ensure only one exit point in several subroutines.
443 kes Implement bsock code to permit locking. Use the new code in Verify
444 in the FD to prevent the heartbeat thread from disrupting the Verify
445 data sent to the Dir.
446 kes Modify SD locking to eliminate locking the reservations system from
447 outside the system. Use the volume lock when getting media data
448 and reserving a new volume at end of media.
449 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
450 when SD starts are not locked into place.
452 kes Fix error compiling runscript code on 64 bit machines.
453 kes Tweak Win32 mount point code.
454 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
455 cleared giving bad file estimate).
456 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
459 kes Keep Schedule run lists in order as suggested by
462 kes Implement autostart scripts for Debian.
463 ebl Implement upgrade catalog scripts.
465 ebl Apply jobstat patch for long term statistics. Have to implement
466 purge stats command and upgrade scripts.
467 kes Fix mtx-changer.in for broken Debian mt program.
469 kes Fix large number of JobMedia records reported by Eric Bollengier.
471 kes Apply doc fix from bug #1062.
472 kes Resolve crash and improper restore wx-console Win32 restore
473 GUI. Fixes bug #1065.
474 kes Update Win32 wxWidgets to latest version.
475 kes Attempt to do correct handling of Win32 mount points. Should
477 kes Fix Win32 FD backup/restore memory leak due to improper termination
478 of BackupRead/Write. This fixes bug# 1038.
480 ebl Reduce memory usage for accurate backup, working only with ctime
481 and mtime. (not all Lstat field)
482 About 40MB for my Linux system (400.000 files)
484 kes Add dcr->reserved_volume flag that allows us to release a volume
485 even if it is not vol->released. This allows maxvol2 to work when
486 Volumes expire and we are already writing to the device (i.e. a
487 volume is pulled out from under us by another job terminating after
488 we reserve the drive).
490 ebl Permit multiple command/console per runscript definition.
491 RunScript { command = /bin/true ; command = /bin/false ... }
492 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
493 (restart an application) just after the VSS snapshot on windows.
494 kes Don't zap dcr values during release_volume() as they might
495 have the next Volume to be mounted.
496 kes Fix AIX prototype.
498 kes Second cut of drive switching during backup.
501 kes Update Win32 version of wxWidgets to most recent version.
502 kes Tweak Copy job details.
503 kes Rework dir_find_next_appendable_volume to make a bit more effort
504 to find a suitable volume before giving up.
506 kes Make ask_sysop_to_create... to return if waken from wait.
507 This helps get out of blocked conditions.
508 kes Experimental implementation of switch_device in reservations.
509 kes Implement FD version to allow easier protocol changes.
510 kes Add Plugin Options string -- not yet passed to FD.
511 kes Implement PluginOptions ACL.
513 kes Attempt to correct problems with restores with autochangers and
514 use counts going negative
515 kes Rework SD status command and implement API for bat. Implements
516 header, runing waitreservation, devices, volumes, spooling,
517 and terminated status keywords.
518 .status storage=xxx <keyword>
519 kes Clarify TLS error message by adding double quotes around name.
520 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
521 kes Pass jcr to tls routines so debug messages can be handled better.
522 kes Rework jobq resource allocation code, and possibly fix a bug
523 that caused reference counts to get out of sync.
525 kes Rename fd/dir plugin to use Bacula standard underscore.
526 kes Plugin work -- bring dir up to fd level.
527 kes Start implementation of VTL code
528 kes Fix Win32 build after adding new cats subroutine.
530 kes First cut at Duplicate Job implementation.
532 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
533 kes Start PluginOptions string, and refactor a bit of ua_run.c
534 ebl Apply Allan patch that permit to reset recyclepool.
536 kes Test patch -- possible fix or improvement for bug #1053
537 kes Refactor FD and SD status commands to permit new API code in
538 SD, and to fix Win32 build.
539 kes Win32 build is now working.
541 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
542 some ideas in patch from Scott Bailey.
543 kes Begin implementation of duplicate Job control.
544 kes Fix some of Win32 build after recent additions.
545 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
546 which causes the FD to detect whether or not the OS has the
547 honor no dump bit (*BSD systems), and if so, to skip backing up
548 any file with this bit set. The feature is enabled by setting
549 'honor no dump flag = yes' in the Options section of a FileSet.
551 kes Correct po warning message with datarootdir
552 kes Implement more code in dird.c to put configuration parsing in
553 a class rather than use globals.
554 kes Restructure SD status command for implementation of bat API
557 kes Suppress incorrect 'Will not descend from x into y' messages.
558 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
559 daemon globals used by parser.
560 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
562 kes Fix free of plugin_list when none exists.
564 ebl Apply accurate project patch.
566 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
567 on non-mempool object)
568 kes First cut of converting FD .status to work with bat API.
570 .status client=XXX header
571 .status client=XXX running
572 .status client=XXX terminated
573 kes Implement first cut of Copy Job.
574 kes Implement Catalog in Pool resource. It overrides catalog specified
575 in the Client resource.
577 kes Apply patch (with some difficulties) from Joao Henrique Freitas
578 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
580 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
581 ftruncate() actually works. In the case of some (cheap) NAS devices,
582 it does not, and so recycling NAS Volumes does not work. The code
583 simply unlink()s the file, then recreates it. This fixes bug #1011.
585 kes First incomplete cut of big malloc blocks for htable.
586 kes Tweak plugin code.
588 kes Plugin debug code + tweak a couple bat dialog layouts
590 kes Fix creating first JobMedia record during Migration to include
591 proper index. This caused slow restores of migrated jobs.
592 kes Temp fix to plugin name file_index.
593 kes Bacula backed up and restored a MySQL database.
595 kes Implement plugin restore.
596 kes Implement parsing of db_driver to give db_type index.
598 kes First cut of plugin restore code.
599 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
600 and do not strip paths on symbolic links.
601 kes Set catalog backup database and user name from values specified on
602 the ./configure line.
603 ebl Fix #1031 about wrong pool source information in job report.
606 kes Remove a redundant jcr argument to find_files, match_files, and
608 kes Implement '.status dir header|scheduled|running|terminated' that
609 prints the requested status section. With the exception of the
610 header, the other reports have fields separated by tabs (\t).
612 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
613 a resource embedded run command to find a since time if no explicit
614 since time was supplied on the command line.
615 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
616 that updates the state file at job termination time in addition to
617 when the daemon terminates.
619 kes First version where a plugin did a backup.
620 bpipe-fd.so created a backup file, wrote a test
621 string to it, and Bacua could restore this fabricated file.
623 kes Implement DB Driver = string for the DBI driver.
624 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
625 kes First cut of code for loading Win32 plugin dlls. Implement
626 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
627 and implement a dlfcn.h file based on opengroup's definitions of
630 kes First cut plugin directives.
632 kes Apply patch from bug #1049 to prevent stripping the path on a
634 kes Attempt to fix bug #1047 where stripping a path corrupts the
635 heap. Waiting for feedback.
636 kes Correct the Mount message not to suggest labeling a new tape
637 when doing a restore. Submitted by email by John Stoffel.
638 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
639 FD by using casting. Reported in bug #1042.
641 kes A bit of crypto cleanup. More later.
643 Release Version 2.2.8
645 kes Apply patch from Martin to correct bug #1040, bscan sets existing
647 kes Fixed important spelling error in doc -- bug #1045.
649 ebl Fix bextract to be able to extract non-portable Win32 data to
651 kes Move initialization of read/write res lock earlier in the code.
652 This fixes the crash with a null conf file. This fixes bug
654 kes Redefine CURES in lib/parse_conf to be URES and move it all
655 into lib/parse_conf.c -- this responds to bug #1042, but does
656 not fix it. The fix is not to compile with FORTIFY_SOURCE.
657 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
658 the trunk SVN. I don't think this was reported as a bug.
660 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
662 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
664 kes Add DataDespooling and DataCommitting status (committing is
665 the last despooling).
666 kes Finish implementation of new reservations code noted below.
668 kes Fix bsnprintf for float point numbers. I broke recently when
669 parameterizing some variables. This fixes bug #1036.
670 kes Undo recent reservations changes ... will apply them later
671 when they work better.
673 ebl Fixes #1034 which cause mysql to hang the connection after 8h
674 ebl Change default statistics target of filename.name and path.path
675 fields for PostgreSQL. This speeds lookup by indexes. Thanks
677 kes A few more tweaks to new reservation code. Make sure to clear
678 vol released flag when retaking volume. When reading label and
679 label is bad mark volume unused. When recycling, mark volume
680 unused so it can be renamed.
682 kes Fix reserve_volume() so it doesn't release a volume in use
683 (i.e. a volume entry not marked released). This should be
684 the last part needed to fix bug #1018.
686 kes Move Heartbeat documentation from Job to Director resource.
687 This fixes bug #1033.
689 kes Fix existing switch drive SD code to call autochanger to release
690 any old volume. This must be done to keep the autochanger from
691 releasing subsequently newly reserved volumes in doing a close().
692 This should fix bug #1018.
693 kes Fail if attempting to get console input in batch mode. This
694 should help fail RunScript console commands that are incomplete.
695 kes First cut implementing switch_drive() in SD (not actually called).
697 kes Implement first cut running console commands in a RunScript.
699 ebl Fixes bug #1028 where 'Selection Type' option was not usable
701 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
704 Release Version 2.2.7
706 kes Add new free_tls() entry point so that Win32 builds.
707 kes Fix compile warning in src/lib/util.c
708 kes Fix entry point for edit_job_codes() so that Win32 builds.
709 kes Fix seg fault Frank Sweetser reports in regression testing
710 on his systems. The problem was that the original author of
711 bsnprintf.c did not take into account the side effects of
712 using ++x in the argument to a #define.
713 kes Make SD protocol backward compatible with version 2.2.x.
715 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
716 because Bacula no longer restores sockets.
717 ebl Always use ignorecase fileset option on win32 FD.
719 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
720 that implements double quoting include names in conf files,
721 and also allows piping input by having the first character
722 be a vertical bar (|).
723 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
724 that implement %f in RunScripts to pass the FileSet name.
725 kes Skip leading | when lex input comes from a pipe as suggested
726 by Michael Stapelberg <michael@stapelberg.de>.
728 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
729 Nerijus Baliunas <nerijus@users.sourceforge.net>
731 kes Implement Plugin Directory and plugin events.
733 kes Implement a security enhancement: TLS authentication but no
734 encryption. Enabled by setting 'TLS Authentication = yes'.
735 Note when this is on, TLS encryption is turned OFF!
737 kes This patch corrects a problem where the maximum concurrent storage
738 jobs counter gets out of sync during restore jobs causing jobs to
739 'wait on max Storage jobs'. This patch fixes bug #1009.
741 kes This patch fixes bcopy so that it produces correct Volumes.
743 kes This patch eliminates spurious output to the console during a VerifyVolume
744 job that contains encrypted data. It fixes bug #1024.
746 kes This patch prevents the 'status dir' command from trying to use a scratch
747 volume and possibly moving it from one pool to another. This patch fixes
750 kes Add new include to postgresql.c suggested by Marc Cousins so
751 that it compiles correctly with pgre version 8.3.
753 kes Fix --archivedir addition to configure. Replace it with
754 --with-archivedir in configure.in This fixes the regression
756 kes This patch fixes bug #1012 where the job is canceled because
757 of Max Run Time exceeded when the job has not yet started.
759 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
760 one 'part' to write. Instead of each part being stored on disk,
761 written to DVD, then deleted from disk, all parts are written to disk,
762 and only the last is written and deleted from disk.
763 kes This patch fixes the status command to include the formating string for
764 JS_AttrInsterting. It fixes bug #1021.
765 kes This patch should fix the Mac OS X build problem on the latest
766 Darwin, where sys/types.h was not included correctly (apparently
767 due to a change in the Mac headers). The solution was to explicitly
768 ensure that it is defined for the ./configure.
769 This patch also has a rebuild of configure that includes the Debian
770 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
771 kes This patch should ensure that queued messages to the console are
772 displayed as soon as possible. It should fix bug 1007, but has been
773 reported not to work.
775 kes This patch fixes the infinite loop when trying to increase the
776 maximum number of volumes in a Pool during the add command.
777 This patch fixes bug #1008.
779 Release Version 2.2.6
781 db Remove extra data on estimate command in joblist for bat.
783 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
784 really change anything, but is the beginning of doing it *right*.
785 To do it completely right the LastWritten date must be passed to
786 the SD, but it is not yet done.
787 kes Minor tweaks to some bat restore SQL.
788 kes This patch fixes bug #1003 where putting the message output from
789 a Verify job into the catalog results in a recursive loop. The problem
790 seems to show up only with postgresql (to be verified).
791 kes Correct %x to %p in postgresql debug statement.
793 kes Fix bug #942 where lots of emails where generated when the heartbeat
794 interval was low and Bacula wanted a different tape from the one in
797 ebl Add new SD despooling attributes and Dir inserting attributes
798 job status codes in the catalog (Status table).
800 ebl Use qmake-qt4 instead of qmake when available (debian system).
802 kes Add a security warning to src/cats/make_catalog_backup.in indicating
803 that passing the password via the command line (arg 3) is insecure.
804 This responds to bug #990 (it doesn't fix it).
806 kes Set default debug_level to zero. This corrects bugs #991 and #993.
807 kes Fix a crash in bat when it cannot connect to the Director for example
808 if the Director is not running.
809 kes Remove redundant INDEX (JobId) from File table in the trunk.
811 kes Make explicit exception to GPL in LICENSE to permit linking
812 the Win32 FD with Microsoft VSS code.
813 kes Apply the Solaris package patch from
814 Masopust, Christian <christian.masopust@siemens.com>
815 kes Apply the patch to optionally add a timestamp in the debug output
816 submitted by Mariusz Czulada <manieq@wp.eu>.
818 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
819 backend (sql_strerror). Fixes bug #989
821 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
822 It applied with no problems.
823 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
825 kes Redirect stderror to stdin on mt status command in mtx-changer.in
826 since the status is returned on stderr on Solaris.
827 kes Activate Close button on tray-monitor window. This fixes
829 kes Check for NULL item in parse_conf.c before calling it. In the
830 case of Device, there is no item and this caused a seg fault when
831 Device appears in the conf file.
832 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
833 avoids pulling in config.h multiple times in some new code.
835 kes Fix spurious warning message printed when creating a volume with
836 a LabelFormat. This fixes bug #976.
838 Release Version 2.2.5
840 kes Add JobId in place of Job name in all the Jmsg() output.
841 kes Correct the APP_DESC for the Win32 storage service (remove an e).
843 kes Make maxvol-test and new more strict maxvol2-test work.
844 kes Print JobId in all Jmsg() job output.
846 kes Add new SD despooling attributes and Dir inserting attributes
847 job status codes. This fixes bug 961.
848 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
850 kes Fix doc issue. This fixes bug #963.
851 kes Fix listing performance problems in bat. Pointed out by
853 kes Remove old debug code.
854 kes Fix bat code that tests for Win32. This should fix bug #968
855 kes Query 5 list wrong Vol after migration. This fixes bug #960
857 ebl Fix #969 where user can't change Replace option in restore menu.
859 kes Save jcr in thread specific data (tsd) for each thread.
860 kes Make Dmsg() print JobId as -%u.
861 kes Make Jmsg, Emsg, and others automatically pickup the jobid
862 for the thread if it exists.
863 kes Remove old reservation debug jid code.
864 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
865 ebl Add an option that permit to specify spool size in job
866 definition. (Applying patches/testing/spoolsize_per_job.patch).
867 You must upgrade SD and DIR at the same time.
868 dvl Add new configuration item --archivedir
869 dvl Adjust regression tests to use tmp not /tmp. This will allow
870 multiple concurrent runs of the regression tests.
872 kes Fix race condition that drops final block written to volume.
873 This happens in rare cases with multiple simultaneous jobs
874 when the Volume fills. This fixes bug #964. May be related
875 to bug #935 and possibly #903.
876 kes Eliminate more strerror() and replace with bstrerror().
877 kes Remove BSD getopt and replace with unrestricted IBM version.
878 kes Fix Win32 build for changed calling sequences.
879 kes More tweaks to the mount volume routines to get everything
880 right. Changed variable name from find to have_vol, which is
881 much easier to understand.
882 kes Enhance btimer debug code.
884 kes Fix FD->SD authorization failure, which was due to spurious
885 wakeups from a pthread_cond_timedwait(). Simply check the
886 predicate before continuing. This fixes bug #953.
887 kes Add const char where needed (more to do). Remove temp debug code.
889 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
890 kes Don't overwrite error message in check_tables_version.
892 kes Unlock batch insert tables with same calls used elsewhere.
893 kes Allow starting 59 jobs a second.
894 kes Make SD session key more random.
895 kes Add retry for SQLite opening db if it fails. Probably helps
897 kes Suppress extra error messages during batch insert failure.
899 kes Add jcr to timer packets so if killed message can be sent to job.
900 kes Add JobId to all Dmsg() output.
901 kes Put some FD auth code on dbglvl rather than fixed.
902 kes Return insert attributes error message in db msg buffer to avoid
903 false error messages. Helps fix bug #966.
904 kes Separate batch init error messages. Probably helps fix bug #966.
905 kes Make SD code that contructs attribute insert check string lengths
907 kes If Dir gets an error during inserting attributes, cancel SD.
908 This reduces unnecessary error messages.
910 kes Correct search boolean for getting Volume info
911 ebl Cleanup batch insert code. Probably fixes bug #965.
912 kes Back out one small change to the reservation system (reserving a volume).
913 kes Rework how a Volume is mounted. It is now much more intelligent and
914 will always attempt to use any mounted volume if possible and reduces
915 calls to the Director asking about volumes.
917 kes Turn off some code when batch insert not enabled.
918 kes Edit FD name in connect error messages.
919 kes Rework the reservation system to take into account that the Director
920 might give us a Volume that is different from the current one being
921 used, and to ensure that we don't exceed Maximum Volume Jobs.
922 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
923 fatal error with multiple jobs running'
924 kes Add more debug code in reservation system.
925 kes Implement maxvol-test to check bug #947.
927 kes Add code to handle tray monitor separated from Win32 FD.
928 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
930 kes Add missed return in fixing verify bug -- trunk only.
931 ebl Fix a command parser issue causing a director segfault.
932 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
934 kes Increase the max block size to 4MB fixes bug #957.
935 kes ERABT if user sets min block size > max block size. Fixes bug #956.
936 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
937 is not properly mounted (recognized) during a poll.
938 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
939 Job that has differences reports Verify OK.
940 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
942 ebl Add an option to operate on all pools with update vol parameters.
943 This complete the project 20. Patch from Nigel Stepp.
944 ebl Add history support to bconsole when using readline.
945 Using Ctrl-D to exit doesn't update .bconsole_history
946 kes Modify new volume algorithm to use max MediaId for generating next
947 volume number rather than the count of Volumes. This should essentially
948 eliminate the failure rate if some volumes were deleted. Bug #921.
949 kes Begin implemention of Optimize Job Scheduling.
950 kes Implement restore callback that Dirk and I agreed on for bat
951 restore. This fixes bug #928. Restore of backup of zero files fails.
952 kes Fix SQL Catalog logging which broke with new db_escape_string
955 Release Version 2.2.4
957 kes Fix bacula_cats.def for new db_escape_string().
958 kes Increase size of name string when FD making connection to SD.
959 May fix bug #953. FD->SD connection failure.
961 kes Add code to help Dan debug 2drive-incremental-2disk test.
962 kes Add code to try to fix bug #908.
963 kes Add waits to multiple exit detection code to try to force pid
964 file to always be deleted.
965 kes Restore good dev.tar.gz to rescue set appropriate binary property.
967 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
968 trying to switch drives by checking for blocking before unblocking.
970 kes Cancel storage daemon in all cases where FD reports error. This
971 should fix virtually all cases of bug #920.
972 kes Fix db_escape_string() for MySQL which did not compile.
974 kes Fix error message that was clobbered when Dir tells SD it does not
975 have write permission on Volume. This should fix a minor point
976 in bug #942, but not the main problem.
977 kes Add code to cancel job in SD if FD connection fails. This should
979 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
980 dvl Pass jcr and db into db_escape_string() to enable better escaping
982 kes Fix migration code to get correct Volume name with multiple volumes
983 by skipping |. Fixes bug #936.
984 kes Implement patch supplied by Landon to fix bug #944 where using
985 TLS with bconsole uses 99+% of the CPU.
986 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
988 kes Move patches into patches directory.
990 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
993 ebl Using 'm' in bconsole will show messages like before,
994 and not memory usage.
995 kes Fix bug #935, and probably also bug #903 where files were not
996 restored. MediaId was not properly set in JobMedia record after
999 kes Suppress chown and chmod error messages if the FD is not running
1002 kes Apply Martin Simmons' patch that should turn off the new API usage
1003 when batch insert is turned off allowing building on older
1005 kes Add ./configure search in qwt-qt4 for qwt package
1007 kes Bacula is now free of 3rd party GPL copyrighted code!
1008 kes Remove idcache.c
1009 kes Add guid_to_name.c/h which replace idcache.
1010 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1012 ebl Detect if new PosgreSQL batch insert API is present.
1013 kes Correct incorrect mempool call causing Director crash. Occurs on
1014 systems without va_copy().
1015 sb Update spec files for 2.2.1 release
1017 kes Fix memory pool call in ua_output.c. bug #934.
1018 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1019 Add test program to fnmatch.c
1021 kes Integrate patch to README.vc8 from
1022 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1023 edit it to get it into Unix patch format.
1024 kes Implement mkpath.c to replace old FSF makepath.c
1026 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1028 Release Version 2.2.1
1030 kes Update POTFILES.in
1031 kes Cleanup a few underquoted AC_DEFUNs in configure
1032 kes Apply patch from Martin Simmons that adds a test for va_copy to
1035 kes Fix bug #921 by increasing the number of tries to create a new volume
1037 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1038 can be called multiple times. Implement a version for machines
1039 without va_copy() that gets a big buffer.
1041 kes Integrate more portable zone offset code into bsmtp.c
1042 Submitted by Attila Fülöp.
1044 kes Fix bad SD->FD return status reported by
1045 (James Harper) <james.harper@bendigoit.com.au>
1046 ebl Fix a bug in read_close_session which return random status
1047 thanks to James Harper
1049 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1050 and directory names during restore of single file/directories.
1051 kes Add sanity checks to .sql command when string is empty. Hopefully
1052 that will resolve Dirks Director crash.
1054 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1055 in the bsmtp chat subroutine when debug is >= 10.
1057 kes Fix Director crash when running bat SQL queries.
1058 kes Add David's notes on Item 8: Copy pools.
1060 kes Rework projects file to be current and ready for a vote.
1061 kes Enhance lex scanner error message.
1063 kes Tweak LICENSE file to mention BSD code.
1064 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1065 if specified on the ./configure.
1066 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1067 This class is intended to allow us to open a second bsock to the
1068 Director while in the restore subdialog.
1070 kes Fix configure to create bat Makefile before creating dependencies.
1071 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1072 kes Add a tooltip to the tray monitor.
1073 dvl Set the Director's PID file before dropping privs. This fixes
1076 kes Update AUTHORs file
1077 kes Increase the default max concurrent jobs to 20 in FD and SD to
1078 correspond with the default .conf files.
1079 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1080 some different, of the same file created by RN when porting the
1082 kes Rearrange some of the Win32 directories and the placement of the files
1084 kes Set DEVELOPER flag in version.h
1086 ========================================================================
1087 Release Version 2.2.0
1089 kes Apply a second doc patch from Marc.
1090 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1091 improves the tips section that discusses how to setup multiple
1094 kes Update bat README file.
1095 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1096 corrects a typo in the Recycle status check in db_find_next_volume().
1097 This will probably fix a number of annoying problems with multiple
1099 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1100 bnet calls -- no functionality change.
1102 kes Modify the Verify output to specify if files are missing on
1103 the Volume(s) or disk. Fixes confusion in bug #916.
1104 kes When more than one Volume is read in a migration job, the last
1105 Volume bytes reported are from the last read volume rather than
1106 the last written volume. Fixed. This fixes bug #910.
1107 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1108 It previously printed New Recyle flag is: no. This fixes bug
1111 kes Correct seg fault when switching tape drives during restore.
1112 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1113 be used until after 2.2.0 release.
1115 kes Remove fnmatch() in SD that permitted wild card specifications.
1116 This fixes bug #914.
1118 kes Fix %g in filename returned by SQL for browse tree reported by
1120 kes Fix configure so that it puts config.out in the cwd rather than
1122 kes Attempt to fix the locking problem reported by Eric in bug #906.
1123 kes Make berrno class to leave errno unchanged after constructor call.
1124 kes Make bnet_server use the heap rather than the stack to allocate
1125 its socket fd pointers to avoid a crash at termination. Problem
1126 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1128 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1129 and putting it in depkgs-qt along with Qt4.3.
1131 kes Rework code in acquire.c that switches drives for reading when
1132 the Media Type does not match. This should fix bug #906
1134 ebl Fix a director segfault during job setup #907
1135 kes Correct seg fault in postgresql when first operation returns no
1136 rows. Fixes Dirks File browser problem seg fault with bat.
1138 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1139 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1142 kes Implement PopUp YES/NO dialog for bat.
1144 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1146 kes Correct RunScript to terminate job in FD on failure.
1147 kes Change abort_on_error and AbortJobOnError to fail_on_error
1148 and FailJobOnError in RunScripts.
1149 kes Minor tweaks of code formating in RunScripts, principally to
1150 avoid depassing 80 columns.
1152 kes Eliminate one #ifdef Win32 in bsmtp
1153 kes Implement grow tool to grow a file for testing very large databases.
1154 kes Add big-vol-test to test Bacula seeking with > 5GB.
1157 kes Modify find_next_volume() to return all values in Media record.
1158 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1162 kes Update Release notes
1164 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1165 Warning, in previous beta version, all media get from scratch keep their
1168 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1169 This should fix bug #842. Made a note to look at removing the temp
1170 files at the end of the install.
1171 kes Add ability to mount and unmount a file device providing it is
1172 marked as being removable and has the appropriate mount and unmount
1173 commands defined in the Device resource. This fixes bug #830.
1174 kes When applying a storage override, release all previous storage
1175 definitions rather than just prepending the new storage.
1176 This should prevent a good deal of confusion.
1178 kes Implement ./configure search for qwt libraries.
1180 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1181 Win32 FD. This should fix bug #893.
1182 kes Remove an unnecessary beep in Win32 init code.
1183 kes Update copyright dates in Win32 executable about boxes.
1184 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1185 code with a BSD getopt.c and getopt.h.
1186 kes Remove sched.h from the Win32 compat directory -- not used.
1187 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1188 need to shut it down, do it through the services panel or the command
1190 kes Remove some inappropriate Bacula FSFE copyrights.
1191 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1192 kes Fix regress config non-portable test as pointed out by
1193 Florian Heigl <florian.heigl@gmail.com>
1194 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1195 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1197 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1198 Reported by Frank Sweetser.
1202 kes Fix client-only build.
1203 kes Integrate client-only fixes for bsys (initgroups) and conio from
1204 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1205 kes Make arguments to get_scratch_volume() in same order as other
1207 kes Rework the prune_volumes() subroutine so that after purging and
1208 no volume found in desired pool, it will check for a scratch
1209 volume. This prevents recycling the whole scratch pool.
1210 kes Add code to status storage to print boffset_t (largefile support).
1212 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1213 kes You now need a --with-qwt=<dir> to be able to build bat.
1214 kes Update src/win32/cats/bacula_cats.def to include the new
1215 db_get_query_dbids() call on Win32.
1217 kes Correct a problem when selecting a scratch volume and moving
1218 it to another pool that lost some columns.
1219 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1220 kes Enhance Autochanger error messages to include Volume and device name.
1221 kes Rework prune_volumes() code to take account of InChanger flag,
1222 and to handle recycling volumes going to the Scratch pool and
1223 current pool because the RecyclePool directive.
1224 kes Implement a better and more efficient db_get_query_dbids() to
1225 handle creating and passing back a list of DBIds.
1229 kes Start work on new more efficient DBId subroutine. First use
1230 will be for recycling volume to Scratch inchanger.
1231 kes Increase number of JobIds in pruning from 1000 to 10000.
1232 This to be replaced by above routine.
1233 kes Begin implementation of building Qt4 on Win32.
1234 kes Correct typo in fix I added for bad TLS shutdown.
1235 kes Pull 2.0.3 patches into patches directory.
1236 kes Update Release notes. Include qt-console in line count.
1237 kes Update Projects file.
1239 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1240 bug in migration code where a job that spanned two volumes
1243 kes Implement new BST_DESPOOLING blocked state. Change from locking
1244 during despooling in SD to blocking. This means that other threads
1245 can work with the device structure, in particular the reservations
1246 system while despooling.
1248 kes Fix return in reservation message queue that missed clearing
1249 the jcr lock (implemented 26Jun07 below).
1250 kes Rename a number of dev methods to make locking function names
1252 kes Document locking in lock.c. Move lock structures to new file
1255 kes Move reservations message lock to lock jcr only this
1257 kes Move main SD locking code into lock.c (new file).
1258 kes Update Win32 build to include lock.c
1262 kes Dirk committed the qwt library code for drawing graphs in bat.
1263 kes Tweak install of qwt so that it is integrated with ./configure.
1265 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1266 out by Eric (my typo).
1267 ebl Fix configure.in to get batch mode enable
1268 kes Return correct string from authenticate.cpp in bat when connecting
1270 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1271 spurious line drops when using TLS.
1272 kes Do not file reparse points when restoring a file that already
1275 kes Implement Windows reparse points -- similar to directories, but
1276 we do not descend into it. This is a first cut. They seem to
1277 be backed up, but restore is not yet tested.
1278 kes Remove restore_blocking in tls code when shutting a socket to leave
1279 it in blocking mode. Hopefully this will fix the encryption bug
1280 reported by Frank Sweetser.
1281 kes When opening a file for backup, tell the OS that we are going to
1282 read it sequentially -- optimization.
1283 kes Change variable names in authenticate_director() to not conflict
1284 with member names in bat. Caused great confusion with compiler,
1287 kes Queue openssl error messages in case of comm problem.
1288 kes Do shutdown() call if socket terminated.
1289 kes Remove some duplicated code in tls.c
1290 kes Move more of the bsock member variables into private and access
1292 kes Add Frank Sweetser's tls-test to the regression suite.
1294 kes Add Swedish sv.po file
1296 kes Don't print clock skew message in FD if less than 3 seconds diff.
1297 kes Add a bit of VSS info to status client.
1298 kes Implement a first cut of Vista VSS, using Win2003 code.
1300 Release: 2.1.20 beta
1302 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1303 loaded tape but uses first drive).
1304 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1305 This was indeed a Win32 issue.
1307 kes Simplify search of autochanger for in-use Volume.
1308 kes Fix exit condition of check for in-use volume. kes Remove
1309 inappropriate my_postgresql_free_result() in db_close()
1311 kes Fix bad return in FD when encryption signature not found.
1312 Probably caused a crash.
1313 kes Inhibit missing encryption signature error messages for
1314 file types where no signature computed.
1315 kes Correct inverted check on autochanger in reservation system.
1316 kes Tweak debug code in autochanger reservation.
1318 kes Add some additional locking in the cats directory in subroutines
1319 that modify packet variables called from batch insert.
1320 kes Rework how dcrs are allocated. new_dcr() can now be called
1321 with an existing pointer, and it will simply clean it up.
1322 This allows the reservation system to test various different
1323 devices, and will permit easy device changes.
1324 kes A bunch of changes all over to handle new new_dcr() calling
1326 kes Work more on the Volume management in the SD. Remember Volumes
1327 for tape drives and for autochangers (even virtual disk changers).
1328 kes When looking at the Volume list to reserve a drive, handle
1329 autochanger names correctly by interating through the changer
1330 devices. Also call the Director to see if a Volume is suitable
1331 for the current job.
1332 kes Fix some bugs in bscan. Make sure all media records are written.
1333 Make sure that valid JobMedia records are written for disk files.
1334 Previously they were completely wrong.
1335 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1336 that the URLs don't change and so that the developers will all
1337 work off the same copy. Rebuild from scrach.
1338 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1340 Release: 2.1.18 beta
1342 kes Fix seg fault in FD from incorrect digest size.
1343 kes Fix argument to non-OpenSSL crypto.c subroutine.
1345 Release: 2.1.16 beta
1347 kes Remove a few malloc()s from the encryption code.
1348 kes Use the class calls to bsock in filed/backup.c and restore.c in
1349 place of the old bnet_xxx code.
1350 kes Implement code that does an on the fly calculation of the
1351 signing digest during restore of encrypted files. It makes
1352 a best guess at the algorithm, and if it is not correct, will
1353 then revert to the old code which reads the file after it is
1355 kes Implement at least one missing crypto stream in stream_to_ascii()
1356 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1357 #877 where a reload with bad syntax causes Dir to exit.
1359 Cut: 2.1.14 beta (not released)
1361 kes Do not free a volume on a tape drive until another volume is
1362 mounted and read, or the autochanger unloads the volume.
1363 This should help the SD re-use volumes that are already mounted,
1364 and should fix bug #886.
1365 kes Apply patch from user brettedgar that allows gnome2-console include
1366 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1367 kes Apply patch from Lucien Weller that fixes day of week calculation
1368 because of DST flag problem. Fixes bug #887.
1370 kes Move find_next_appendable_volume() to after acquiring a valid device
1371 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1373 kes Unable to reproduce bug 872. However added additional testing for
1375 kes Bug #874 resolved by documenting SQLite limitations.
1376 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1377 kes Bug #881 resolved by removing typo in mtx-changer script.
1378 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1379 approval. Added a link to the wiki on the web page, and implemented
1380 a backup from http://paramount.ind.wpi.edu
1382 kes Fix update allfrompool to pass pool name.
1384 kes Convert to pure GPL v2 license.
1385 kes Fix sscanf problems reported by Peter Buschman that caused
1386 a bus error on Solaris.
1387 kes Rework (simplify) the select prompt in bat.
1388 kes Move get_jobid_from_tid() into lib and create a
1390 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1391 should definitely fix the problem of lost error messages in the
1393 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1394 kes Eliminate tcpd.h from the project. Enclose the #include from the
1395 library with extern C ...
1396 kes Add print of signal name when a signal is trapped.
1398 Release: 2.1.12 beta
1400 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1402 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1403 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1404 makes SQLit3 run 30 times faster, though a bit less safe.
1405 kes Implement --with-batch-insert in configure and detection of thread
1406 safe libraries. It is on by default, but turned off if no thread
1407 safe library (e.g. SQLite 2) is available.
1409 kes Fix Bacula PostgreSQL buffer overruns.
1410 kes Do better checking for NULL results returned from PostgreSQL;
1411 implement retry for failed queries; clear results buffer after
1412 failed query. Hopefully this will correct the PostgreSQL failures.
1414 kes Implement algorithm to handle only one appendable volume with
1415 Prefer Mounted Volumes = no.
1416 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1417 returned from a query.
1418 kes Make volume lock recursive.
1419 kes Implement an additional volume reservation algorithm that
1420 starts by considering all reserved volumes then uses the
1421 old brute force algorithm of searching the resources to
1422 find a suitable device.
1423 kes Add new reservations debug code and refine the old code.
1424 kes Update the win32/dll/bacula.defs file.
1426 kes Tweak reservations algorithm to permit a few more cases, i.e.
1427 volume reserved, but on different drive, ...
1428 kes Enhance SD status to include Pool and Media Type for drive in a
1429 more readable format (a bit longer).
1430 kes Fix PostgreSQL double free.
1432 kes Minor refactoring of restore decryption code.
1433 kes Add code to smartall.c to detect double free of a buffer.
1435 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1436 so that bsmtp will create a correct email address (mailbox only).
1437 kes Modify 'memory' command so that the buffers are listed as 'In use'
1438 to avoid confusion with Orphaned buffers.
1439 kes I reworked the OpenSSL include/lib flags to be handled in
1440 the standard Bacula way, which should fix bug #863 concerning
1441 non-standard OpenSSL libraries.
1443 kes Implement Help Browser window for bat.
1444 kes Fix reload bug that reset StorageId to zero.
1446 kes Fix TLS #ifdefing when TLS turned off.
1447 kes Ensure that when labelling a tape with Slot=0 that InChanger
1449 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1451 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1452 add DISTINCT (required by PostgreSQL).
1453 kes Implement BSOCK authenticate_director() method. Eventually will
1454 authenicate all daemons.
1455 kes Move several more functions into the BSOCK class.
1457 kes Add code to tell the OS that we no longer need a cached
1458 file that we were reading. In findlib/bfile.c. Also,
1459 only cache files that we are reading. Thanks to
1460 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1461 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1462 kes Implement script to automatically generate cats and dll .def
1463 files for Win32 dll.
1464 kes Update README.mingw32 to include new .def file generation.
1465 kes Correct typo in UTF-8 error message as reported by:
1466 jhernandez <julianhernandez@gmail.com>
1467 kes Add additional sm_check() code on debug level 1.
1468 kes Set default debug level to 1.
1469 kes Trap SIGABRT in attempt to get traceback.
1471 kes Reduce bat connect timeout from 30 to 15 seconds.
1472 kes More restructuring and implementing BSOCK class in place of
1474 kes Remove a few unnecessary malloc() tests in crypto code.
1475 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1476 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1477 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1479 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1481 kes Fix Verify InitCatalog. The attributes were not pointing to the
1482 correct saved location.
1483 kes Implement message callback so that GUI is sure to get all
1484 daemon messages. Currently displayed in a dialog in bat.
1485 kes Ignore SIGUSR2 (Bacula timer) in bat.
1486 kes Apply regress patch from bug #859 to allow regress to work
1487 with Solaris compiler.
1489 kes Begin adding TLS support to bat.
1490 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1491 clean up lex.c and make it more readable.
1493 kes Move more bnet functions into the BSOCK class.
1494 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1495 kes Complete change of berrno strerror() method to bstrerror()
1497 Release: 2.1.10 beta
1499 kes Cleanup incorrect email addresses in bsmtp.
1500 kes Make bat display initial messages rather than discard them.
1502 kes First cut of adding .mod to the run command.
1503 kes Implement auto display of messages in bat.
1504 kes Enhanced preferences to allow all Bacula output to be
1507 kes Try to make bsmtp date routines more generic.
1508 kes Fixed bug #856 autochanger documentation.
1509 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1510 kes Add new cats entry point so Win32 builds.
1512 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1514 kes Do better checking for the MySQL 64 bit libraries looking for both
1515 .a and .so libraries.
1516 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1517 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1518 kes Require the thread safe version of MySQL during configure. Thanks
1519 to Andre Noll for pointing this out.
1520 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1521 continuing in migration code.
1522 kes Apply implementation of tray-monitor font derived from gnome-console
1523 submitted by Andreas Piesk <a.piesk@gmx.net>
1525 kes Eliminate important memory loss in SQLite
1526 kes Fixed the batch insert MySQL thread specific data that was not
1527 being freed. See cats/mysql.c:db_thread_cleanup().
1528 kes Fix restore before command.
1529 kes Convert old hdr.name to name() in a few places.
1530 kes Implement update jobid command.
1531 kes Return all time_t dates in db_get_job_record()
1532 kes Stop watchdog in SD earlier.
1533 kes Put Pool just after Storage in please mount message.
1534 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1537 kes Update the po files.
1538 kes Fix Verify InitCatalog by making it cache attributes.
1540 kes Change name bacula-bat to bat for man 1 page to correspond to
1542 kes Check for client and store NULL pointers in status command. This
1544 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1545 kes Fix sign extended editing of %p.
1546 kes Clean out a little old #ifdefing in cats/mysql.c
1548 kes If time diff between DIR and FD is more than 600 seconds convert
1549 INFO message to WARNING.
1550 kes Implement heap size display in status for all daemons.
1551 kes Attempt to fix MySQL db open memory loss (not successfull).
1552 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1553 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1554 Query. This looks like a MySQL but but by doing extra releases,
1555 the memory goes away. This should fix bug #847.
1557 kes When backup fails, cancel SD before waiting for sd termination.
1558 kes If SD is waiting for FD to connect during cancel, wake up the
1560 kes Fix fsf code so that errno is correctly reported.
1561 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1563 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1564 so that Bacula doesn't later stumble into a seg fault.
1565 kes Use the term Restore Client in the restore Job report.
1566 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1567 the original job's FileSetId.
1568 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1569 spooling in migration jobs. Not yet tested.
1570 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1571 reading conf file from a pipe. However, do it with open_bpipe()
1572 rather than popen. Not yet tested.
1574 kes Fix an ugly bug where the VolCatBytes were getting updated
1576 kes Implement bconsole memory command that prints current memory
1577 usage, plus smartalloc dump.
1578 kes Clarify some error messages in backup, admin, and migrate.
1579 kes Shrink label dialog to smaller size.
1580 kes Invert Cancel OK buttons on restore to be OK Cancel.
1581 kes More strerror() to bstrerror() conversions.
1583 kes Start implementing bstrerror() in place of strerror().
1584 kes Stripping path -- seems to work.
1586 kes Prevent door and port files from being restored (mostly
1588 kes Free an unreleased buffer in compat code.
1589 kes Change console Job name from *Console* to -Console- to eliminate
1590 Win32 filename problems. Put Win32 path separator when creating
1591 Console file. This fixes bug #846.
1592 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1594 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1596 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1597 to force Win32 error message.
1599 kes First cut strip path. The data should be passed to the FD,
1600 but nothing is done with it yet.
1601 kes Enhance the digest and signature routines in the crypto
1602 library to accept a JCR and to use it to print error messages
1603 so that they will go in the Job report rather than the daemon's
1605 kes Simplify some of the verify signature code.
1606 kes Simplify a few of the alternative returns in the signature
1609 ebl Use only POSIX regex instead of GNU regex in breg.c for
1610 File relocation. It fix broken freebsd compilation.
1611 kes Convert all other Dir files to use new ua class message
1613 kes Tentative fix for missing digest signature in bug 807.
1614 kes Correct handle problem in new win32_ftruncate routine.
1615 kes Convert ua_purge.c and ua_update.c to use new ua class
1616 message routines for bat.
1618 kes Correct incorrect installation of LICENSE in Win32 installer.
1619 kes Display LICENSE at the beginning of the Win32 install.
1620 kes Attempt to correct the need for the png files to be installed
1622 kes Reapply my bat.conf install script in qt-console. I think I
1623 editted bat.pro instead of bat.pro.in and it was lost.
1624 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1625 the /var/lock/subsys for subsysdir. Also corrects typos in the
1628 kes First cut update job.
1629 kes Correct configure to include qmake of src/qt-console directory.
1631 kes Make restore job yes/mod/no print in one command so GUI works.
1632 kes First cut implementing backup and restore client.
1633 kes Correct editing in Verify output that caused a seg fault.
1635 kes Insure that bat.conf is not overwritten during installation.
1636 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1637 while I was implementing migration in March 2006 !
1639 ebl Cleanup file relocation, using char *RegexWhere instead of
1640 char *where + bool where_use_regexp
1641 kes Update some manpages and add bat manpage.
1642 kes Make a first cut at converting bacula.spec.in for bwx-console
1644 kes Apply patch from John Goerzen to add hostname as fourth argument
1645 to make_catalog_backup script.
1646 kes Fix typos I introduced into bsmtp.c
1647 kes Make pm_strxxx() routines handle input of NULL pointer. This
1648 is to protect from NULL pointers returned from SQL databases.
1649 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1650 kes Add more debug to FIFO code -- fix fifo regression test.
1652 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1653 kes Add thread timer to bnet_connect() to break from OS if wait time
1656 kes Update Win32 build to include new files, new symbols, and
1658 kes Implement socket level heartbeat (tcp_keepidle)
1659 ebl Commit File relocation patch
1660 kes Make bat have 'make install' target.
1661 kes Warn during install if old gnome-console binary found.
1662 kes Warn during install if old wx-console binary found.
1663 kes Add -8 option to bsmtp command line to add content type utf-8.
1664 Fixes bug #809. (Character coding problem in bsmtp).
1665 kes If < is found in target (from, to, cc) then do not enclose the
1666 target in < > in bsmtp. Fixes bug #772 (malformed address).
1667 kes When printing certain items in dbcheck, stop after 300000.
1668 Fixes bug #822. (dbcheck loops).
1669 kes Incorrect status in Dir after waiting for mount with poll set.
1672 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1674 kes Print waiting to reserve a device every 5 mins.
1676 kes Don't call close_part in label.c if tape and relabel.
1677 kes Don't free volume if busy in close() -- should help with
1679 ebl Fix #824 RunScript bug (After script could be execute twice)
1680 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1681 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1682 Add a regression script to test RunScript
1684 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1687 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1688 deprecated. No additional bugs will be fixed, and they will be dropped
1689 in a future release (probably 2.4.0).
1690 kes Change name of wx-console to bwx-console to make it more Bacula
1692 kes Change the name of gnome-console to bgnome-console to make it
1695 kes Some time in March, a Feature Request with patch from Jorj Bauer
1696 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1698 The ability for the director to validate a Client (FD) CN against
1699 an arbitrary set of patterns rather than the hostname, with
1700 A new 'TLS Allowed CN' set of directives which are implemented
1701 in the Client resource. Then pattern matching is used in place
1702 of hostname matching against the Certificate's CN. As an example, we
1703 have certificates which (a) use a local CA, and (b) have a CN of the
1705 kes Add new/changed entry points to Win32 build
1706 kes Create unaccepted-projects for projects that are not accepted.
1707 kes Simplify locking in the reservations system.
1708 kes Add more debug code in reservations.
1709 kes Make sure error condition on reserving a volume is handled correctly.
1710 kes Correct handling of volume_in_use.
1711 kes Correct handling of initializing a device.
1712 kes Move handling of broadcasting releasing a device into release_device().
1713 kes Correct attaching dcr to dev so that it is only done if device
1714 is properly initiated.
1716 kes Locking debug level tweaks in SD.
1717 kes Tweak new Volume code.
1719 kes Add exec external-command [wait-seconds] to bconsole. This
1720 executes the external-command. Note! normally external-command
1721 should be enclosed in double quotes.
1722 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1723 it should normally be off in a production system.
1725 kes Implement die command for SD so that we can force it to dump.
1726 kes Implement SD lock debug code.
1727 kes Implement new algorithm for keeping Volume list in SD. It
1728 is now owned by the device.
1730 kes Implement new code for freeing in use volumes that should
1731 resolve if not all, some of the problems of multiple drive
1732 tape conflicts described in bug 801.
1734 kes Fix gui/bacula-web/images files in svn.
1735 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1737 ebl Fix a bug in batch mode (in string escape)
1738 kes Correct migration prune SQL typo that crept in in a
1739 recent 2.1.x change.
1741 kes Move bnet_despool() into class in bsock.c
1742 kes Modify job report to include director name and Build OS.
1743 kes Move drop root privilege and check_catalog() before fork.
1744 kes Add update database scripts (version 9 to 10) to updatedb directory.
1746 ebl Check size and age of each file after its backup to see if
1747 it has changed during backup, if 'checkfilechanges' is set.
1748 The FD will do an extra check (stat(2)) after
1749 each file backup. mtime, ctime and size are compared with
1750 'before backup' information. If time or size mismatch, an
1751 error message will be generated. You must upgrade FD to use it.
1753 kes Make database name and user configurable
1754 --with-db-name=xxx --with-db-user=xxx
1755 kes Add back database type to message.c for debugging.
1757 kes Implement dir_sql() which issues an SQL query.
1758 kes Modify bat medialist to use dir_sql() and do some minor C++
1759 formatting as well as eliminating a number of pointers, simplifing
1762 kes Fix some of the mtx-changer grep commands for tape label readers.
1763 kes Convert a number of bsendmsg into the appropriate send/warning/error
1764 message class calls.
1765 kes Suppress the using database message in the .sql command.
1766 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1768 kes Add context menu for floating a window.
1769 kes Some minor cleanup and name changes in qt-console
1770 kes Add doing mt setblk 0 in Win32 mtx-changer.
1771 kes Apply Martin's bug fix to move definition of ENODATA for
1773 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1774 sqlite2 and sqlite3.
1776 kes More pruning cleanup.
1777 kes Turn on wait_for_drive by default in mtx-changer.
1778 kes Turn on Batch insert code by default as it now passes regression.
1779 kes Add ./configure --enable-bat to enable building of Bat.
1780 No install yet though.
1782 kes Implement a new .sql command for bat.
1783 kes Implement code to turn off pruning in obtaining the next volume.
1784 Pruning is turned off for the status dir command, but turned on
1785 for SD requests and for the list nextvolume command.
1787 kes Correct Qmsg() that was not updated correctly when committing a
1788 previous change (probably the recent TLS patch).
1790 kes Write new subroutine is_volume_purged() that explicitly checks
1791 if the Volume is purged, and if so marks it as such. This should
1792 resolve problems reported about needing to mount twice to recycle
1794 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1795 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1796 amount of duplicated code.
1797 kes Do volume pruning only for the Media Type desired (reduces pruning time
1798 if multiple Media Types are in the same pool).
1799 kes Implement more detailed info in the Job report for the Bacula version
1801 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1803 ebl Add bbatch tool to bench database and insert mode.
1804 Fix sql quote stuff in batch mode
1805 Fix sql stuff for mysql
1807 kes Correct problems with am/pm scheduling. Fixes bug #808.
1808 kes Implement new prunning code that prunes up to 1000 jobs at
1809 the same time. The same technique can be applied to a number
1810 of other prune/purge subroutines.
1811 kes Add an insanity check when starting a new tape job to ensure
1812 that the tape position has not been changed. If so fail the
1814 kes Fix Win32 build for dlls to add the folllowing:
1815 src/lib/bsock.c -- new file with new entry points
1816 src/lib/dlist.c -- new entry points
1817 src/cats/sql_create.c -- new entry point
1818 src/cats/sql_cmds.c -- new DATA item exported
1820 ebl batch mode cleanup bscan-test is ok now.
1821 kes Implement SD code to check length of disk volume before appending.
1823 kes Correct return status on db_batch... routines.
1824 kes Add call to db_write_batch_file_records() to migration code.
1825 ebl Fix AfterJob timing
1826 kes Move the checking of the database in initializion of the Director
1827 to after we drop privileges. This avoids the need for both root
1828 and bacula access to the DB.
1829 kes Correct a misplaced variable definition in src/filed/backup.c
1830 kes Correct how the new batch insert db_create_attributes_record()
1831 uses the arguments. Caused a seg fault in bscan.
1832 kes Implement lock() and unlock() methods in DEVICE class.
1833 Implement block() and set_block(xx) methods in DEVICE class.
1834 kes Modify bnet_connect() so that it uses time() to check for the
1835 wait time expiring (on some OSes, some system calls may not
1836 return immediately).
1837 kes Modify Verify to obtain the previous JobId when it is actually
1838 running rather than at schedule time (as it was in 1.38.x).
1839 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1841 kes When checking pid in pid file, continue running if the pid is
1842 the same as ours. This occurs on IRIX after a system crash.
1845 kes Extend new GUI API.
1846 kes Make the ua structure a class, and implement send_msg(),
1847 error_msg(), warning_msg(), and info_msg().
1849 kes Apply fix from for building wx-console on the Mac from
1851 kes Implement new select mechanism for GUI programs.
1852 kes Reorganize initialization of stackedWidgets in bat.
1854 kes Add updated nagios plugin supplied by Christian Masopust.
1856 kes More bat implementation.
1857 kes File migrate bug with Pool Occupancy using mediaid instead
1858 of jobids. Fixes bug #795.
1859 kes Fix orphaned buffers in filed backup and verify due to
1860 crypto buffers not freed during errors. Fixes bug #789.
1861 kes Extend new GUI api code to tree commands.
1862 kes Ensure that tree and dot commands check console ACLs.
1863 kes Permit marking directory with trailing slash.
1864 kes Allow 20 console connections (instead of only 10).
1866 kes Add smartctl call to bacula-sd.conf as an example of getting
1869 kes Modify jobq.c to let simultaneous restore jobs run. This may
1870 cause them to fail if they cannot get a drive.
1871 kes Add Client Connect Wait to Storage daemon to permit users to
1872 modify the time the SD waits for a FD connection.
1874 kes Correct virtual changer check which was backwards. This caused
1875 volumes to be unloaded into slots already occupied.
1877 kes Apply Command ACL filter to JobId list in restore command.
1878 kes Correct typeo in var.c patch.
1880 kes Don't let Bacula prune File or Job records for the current Job.
1881 kes Fix variable substitution pad + inc bug reported (with patch)
1884 kes Correct SQLite log table index as reported by Luca Berra.
1886 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1888 kes Begin implementing new comm signals for API.
1889 kes Fix a few places in lib/message.c where the open fd may
1891 kes Continue implementing lib/bsock.c (real class). Make jcr,
1892 who, host, and port private. There are new methods to access
1893 them for non-class use. This required touching a number of files.
1895 kes Add LANG=C to autoconf/randpass so it works with languages other
1896 than English. Fixes bug #788.
1898 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1900 You will not be able to generate Include/Exclude list any more.
1901 It will be fixed soon.
1902 If you want to use this, you can apply
1903 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1905 kes Restore of sockets created false error messages because Bacula
1906 no longer restores sockets, but the code was still trying to
1907 set the attributes on a non-existent file. Reported by a user.
1908 ebl finish RecyclePool feature
1909 Media will takes Pool.RecyclePool
1910 when moving from Scratch to a Pool or when user will do
1911 update volume=xxx frompool
1912 To use it, add RecyclePool = aPool to your Pool resource
1915 RecyclePool = Scratch
1919 kes Expand new BSOCK class adding signal() and new BNET signals.
1920 kes Begin enhancing the dot commands adding a new API function
1921 that returns more information and will make it easier
1922 to interface to the Director from a program.
1924 kes Make DEVICE fd private. Its new name is m_fd, and can be
1925 obtained with dev->fd() outside the class. This is the
1926 first of many DEVICE members to be made private.
1927 kes Implement Michael Renner's idea on having a virtual disk
1928 changer. I made some minor modifications (e.g. I did not
1929 implement the Virtual Changer directive, but simply set
1930 the Changer Command to an empty string.
1932 kes Implement a BSOCK send() method that writes the whole record
1933 in a single write() request rather than in two.
1934 ebl add update volume=xxx recyclepool=yyyy
1935 volume takes recyclepool from pool when using update volume=xxx from pool
1937 kes Fix encryption deblocking bug, which caused some restored files
1938 to be truncated. This fixes bug #763.
1939 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1940 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1942 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1943 ebl Use btime_t instead of uint64_t in media patch.
1945 kes Optimize the use of the database a bit in the Status dir command.
1946 Only open it when needed, ensure that if any previous database
1947 was opened, it is closed.
1949 kes Correct VolCatBytes bug from media patch.
1950 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1951 in the case of orphaned records.
1952 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1953 and File records in 300K chunks to be more efficient. This
1954 idea came from Juan Luis Frances (if I remember right).
1955 kes Apply Eric's scratch patch that moves a purged Volume to
1956 the RecyclePool. Question: how is RecyclePool set? what
1957 happens to the ScratchPool?
1958 kes Apply Eric's media patch that collects read/write media
1959 times as well as byte counts. This patch requires a
1960 simultaneous upgrade of the DIR and SD. Note, there
1961 should be some way to turn off timing. I'm not sure
1962 times are in Bacula units.
1963 kes Apply Eric's batch-insert patch.
1965 kes Update projects list.
1967 kes Implement Include/Exclude file lists in FD as dlists using
1968 the new dlistString class. This permits efficiently having
1969 large include/exclude lists and completes project Item 25.
1970 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1971 console is authorized to cancel the job. This fixes bug
1973 kes Modify SD so that the VolCatJobs medium record is updated
1974 at the beginning of a Job rather than the end. This
1975 fixes bug #775 where exceeding MaxVolJobs caused jobs
1977 kes Added a mutex around getting and setting Volume information
1978 so that multiple simultaneous jobs will single thread.
1980 Switch to using Subversion
1981 kes Remove src/pygtk-console/ from configure
1983 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1984 plus the entrypoints.
1985 kes Apply patch supplied that corrects debug print
1986 in canceling jobs for max run time. Supplied as
1987 part of bug #621, which was previously fixed.
1989 kes Test on job_canceled() and sd_msg_thread_done inside
1990 loop starting the message thread to avoid a race condition.
1992 kes Remove rl_catch_signal from console.c as it conflicted
1993 with the header definition. Fixes bug #765.
1994 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1996 kes Clarify some stored/acquire messages to indicate if the
1997 problem is with read or append.
1999 kes Fix memory leak with storage ids in cats/sql_get.c
2000 kes Terminate watchdog earlier to avoid reference to released
2001 memory -- reported by Jason Austin.
2002 kes Move closing the database from jobq.c to the director daemon
2003 termination routine. This fixes memory leaks for shadow jobs
2004 (i.e. migration jobs).
2005 kes Free up the unique jobid chain items in migrate.c. This fixes
2006 a memory leak problem.
2007 kes Convert some ugly looking for statements to use foreach_alist
2008 in findlib/find.c. This will facilitate converting the structures
2009 to use dlist (for large include/exclude lists).
2010 kes Fix a bug in the btree.c and btree.h routines, then rename them
2011 rblist and add them to be built in src/lib. Include some new
2012 methods written by Rudolf Cejka that make the code more readable
2013 (hides some of the ugly casting).
2014 kes Add set_next() and set_prev() methods which make the code much more
2015 readable. Also add a new dlistString class that facilitates storing
2016 strings in dlists. To be used in the large include/exclude lists.
2017 kes Make some trivial modifications to lib/tree.h that use rblist
2018 rather than dlist for storing the tree links. This was suggested
2019 by Rudolf Cejka. The result of this is that the restore tree now
2020 uses red-black binary trees rather than simple linked lists. This
2021 should give rather dramatic speed improvements for directories
2022 contining large numbers of directories/files (more than 10000).
2024 kes Fix maxruntime bug #621.
2026 ebl Implement the include JobID in spool file name project.
2027 kes Reorder projects file in order determined by Jan 2007 vote.
2028 kes Implement item #12 on project list -- quick release of FD by
2030 kes Fix open of SQLite3 db where user does not have write permission
2031 so that DIR does not crash. Fixes bug #761.
2033 kes Add back missing @ in Win32 Makefile.
2034 kes Change 'Device not configured to autolabel' from INFO
2036 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2037 which should restart an indefinite # of times.
2038 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2039 other DIR specifications.
2041 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2042 Fix path quoting in SQLite scripts.
2043 Fix problems with SHGetFolderPath.
2045 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2047 kes Fix Job restart on error bug that promotes an Inc to a Full
2048 backup. This should fix bug #755.
2049 kes Add qt-console and first cut of code.
2053 kes Fix Bacula->Documentation link on Win32 to point to index.html
2054 instead of bacula.html. Fixed bug #750.
2055 kes Return JobId in db_get_job_record() when JobId==0. This should
2057 kes Do not release source pointers when restarting a failed job.
2059 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2060 This *should* fix bug #747.
2061 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2064 kes Modify USTORE constructor to set an empty store_source string,
2065 and don't copy the store_source string in a cancel. Hopefully
2066 this will fix Arno's seg fault, bug #744.
2067 kes Add back code to disable conio in configure. Fixes bug #743.
2068 kes Correct the Options scanner in the FD to correctly handle
2069 SHA1 option, which was eating the next option. Reported by
2071 kes Add code to indicate when the SD is spooling, spool wait, and
2072 despooling as requested by Alan Brown.
2074 Version 2.0.0 released: 4 January 2007