1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 Release Version 2.4.0:
32 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
35 kes Add create_postgresql_database.sql to Win32 installer. Should
36 fix problem reported by Juilio Monteiro.
37 kes Get correct slot when auto unloading a device. This fixes bug
40 kes Fix multiple media restore.
41 kes Make DEVICE Slot private and access it via a method.
42 Allows better control over when it is set and cleared.
43 kes Fix possible seg fault if SQL error.
45 kes Add Martin's fixes to argument scanning for the estimate
46 command. This fixes bug #1093.
47 kes Add debug code to SD.
48 kes Fix renaming a Volume, which used the wrong Volume name.
50 kes If operator has rewind tape, print warning, release tape and
51 try once more. If tape is positioned somewhere, something went
52 wrong, so mark the tape in error and try once more. Previously
53 this error was fatal, now it produces an error message.
54 kes Ensure correct volume name displayed during restore
55 kes Ensure that Volume is mounted for restore.
57 kes Fix a few more Coverity reported problems.
59 kes Apply Allan Black's status dir job count patch.
60 ebl Add information about IMPORT/EXPORT slots in mtx-script.
61 kes Enhance a couple of SD debug messages.
62 kes Tweak unload flag setting and ensure it is set during swap.
64 ebl Fix #1091 about bad output in estimate command.
66 kes Modify autochanger locking to attempt to avoid race
68 kes Make sure device not busy before doing label command.
69 kes Display open() errors except when polling. Previously too
70 many were suppressed. This should fix bug #1070.
71 kes Fix Win32 reparse points. Bacula will not recurse into any
72 reparse point directory, including mount points, unless the
73 directory is explicitly mentioned at the top level (same as
74 with Unix). A file that is linked to another file will be
75 backed up -- much as Unix does for hardlinked files.
78 kes Remove double quotes from ChangeLog and ReleaseNotes
79 kes Remove StorageId test when pruning and recycling (Eric's changes).
80 kes Remove old form of locking when getting volumes -- causes deadlock.
81 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
82 the name unique and to eliminate compile time error.
83 kes Add accurate.o to Win32 FD Makefile
85 kes Fix cats dll build on Win32 after db_update_job_end_record
86 calling sequence change.
87 ebl Switch to tokyo dbm instead of htable in accurate code
88 ebl Include tokyo dbm to bacula source tree
90 kes Fix buffer overruns detected by Coverity.
92 kes Tweak joblog display.
94 kes Implement --without-qwt
95 kes Fix layout of restore tree dialog
96 kes Add configure bat QWT libraries, so that bat can be built
97 with or without the QWT libaries.
99 ebl Add dummy tape driver for regression tests.
100 kes Make sure we unload the right slot when swapping.
102 kes Add debug times, reduce size of two-pool-changer test
104 ebl Tweak autoconf scripts for faketape
106 kes Improve SD reserve debug code.
107 kes Testing an improvement to free up volumes no longer in use.
109 kes Rework SD acquire for read to handle autochanger Volume
111 kes Implement regression that explicitly tests swapping a Volume
112 from one drive to another.
113 kes Enhance disk-changer to detect most error conditions.
114 kes Fix SD code so that it properly swaps a Volume between drives.
115 This fixes bug #1083.
117 kes Apply libdbi patch from Joao Freitas for regress and for
118 Bacula trunk. Regress now works with libdbi. Nice.
119 kes Apply .nobackup patch from bug #1077 submitted by
121 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
122 name into jobs cloned via the run directive.
124 kes Prevent a Volume that is being swapped from being freed from
125 the volume list. This will most likely fix, at least partially,
127 kes Fix strippath so that it does not get a buffer overrun and crash FD.
128 This fixes bug #1078.
129 kes Remove 50 millisec wait in SD that broke debugger.
130 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
131 that a job may run, counted from when the job was scheduled.
132 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
133 a job may block waiting for a resource, counted from when the job starts
134 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
135 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
136 that implements multiple commands per line in the console when using
137 readline. Modify the default to use a semicolon as the command separator.
139 ebl Fix SQL query in migration code.
140 ebl Make accurate mode with hash disk pass regression tests
142 ebl Implement first cut of accurate backup with hash disk.
144 kes Force unload of volume when wrong volume mounted in SD.
146 kes Fix bat seg fault at termination.
147 kes Add Bacula generated version to bat about box.
150 kes Experiment with allowing multiple read jobs.
151 kes Move final volume swapping code to DCR method and
152 call it from acquire_for_read().
153 kes When wrong volume is mounted during read, unload_autochanger.
155 kes Integrate the libdbi changes from Joao Henrique Freitas
157 kes Stop searching for Volumes in SD askdir if DIR returns the
158 same volume name twice in a row.
159 kes Close bat console windows first to eliminate error message
162 kes Tweak the swap Volume from one drive to another code so that
163 it now seems to work.
164 kes Resolve several problems with recycling that broke the new
165 code (these problems are in 2.2.9 as well).
166 kes Remove the volume lock when calling the sysop code.
167 kes Don't mark a reserved volume with no writers as unused otherwise
170 kes Rework class structures for VOLRES, DCR, and DEVICE to make
171 the method names a bit more logical, and for more logically
172 handling the responsibilities.
174 kes Remove redundant code in terminating the scheduler that just
175 causes a seg fault in many cases.
176 kes Cleanup releasing a volume and make it a DCR method.
177 kes Improve algorithm for detecting pre-reserved volume and
180 kes Tweak volume swapping code so it works.
181 kes Correct name overloading in mount.c
182 kes Replace released flag in VOLRES with reserved and add access
183 methods for the VOLRES class.
184 kes Prevent volume from being released while being swapped.
185 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
187 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
189 kes Refactor parts of stored/mount.c
191 ebl Add sanity checks for VolWriteTime and VolReadTime
192 ebl Take care of bad clock changes while computing VolWriteTime
193 and VolReadTime. This should fix or limit #1066
194 kes Correct error string numbers in dird/catreq.c
195 kes Restructure reserving, acquiring, and mounting volumes. Calls to
196 autochanger are deferred for mount.c -- simplifes the code.
198 kes Do not prune any running job. It just fails the job.
199 kes Lock the volumes when changing dev->reserved_device and marking
200 the volume unused otherwise the device can get reserved by
201 another job before the volume is released, thus blocking it.
203 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
204 kes Fix bug #1063, reuse of freed ptr in list nextvol.
205 kes Release regex compile buffer in filed/job.c
206 kes Add proper type of const char in sql_create.c
207 kes Turn off debug in daemon termination routines
208 kes Move free_volume_list() before devices are freed in stored.c
209 kes Fix reference to uninitalized stack variables in bregex.c.
210 This should correct bug #1067.
212 kes Fix possible seg fault in SD when freeing a volume entry.
214 kes Implement unload_dev() before swap device.
215 ebl Add statistics prunning with option and menu
216 kes Separate unload_dev() from unload_other_device() in autochanger.c
218 kes Apply patch from bug #1069 that corrects spurious error messages
219 when ACLs enabled on SGI but no ACL exists.
220 ebl Fix small segfault in bacula-sd when debug level is 500
221 kes Modify run_program() and run_program_full_output() to use
222 call by reference for the results string. This corrects a long
223 standing problem where the address of the string may be changed
224 in the subroutine but not in the calling program.
226 kes Re-enable code to remember last volume mounted on a non-tape
228 kes Add patch supplied in bug #1068 that fixes a SD crash when using
229 a Virtual autochanger.
230 kes Generate correct JobMedia records during spooling/despooling when
231 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
232 <tih@hamartun.priv.no> for excellent analysis and testing.
234 kes Tweak hash algorithm for htable using Martin Simmons idea
235 for doing a circular shift.
236 kes Remember what volume is in VTLs (previously turned off for
238 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
239 pointed out some problems in creating JobMedia records during
240 spooling with concurrent jobs. Fix the problem by updating the
241 start file position before despooling and generate a jobmedia
242 record at the end of despooling.
244 kes Fix handling of JobMedia records during spooling and when a
245 Volume is changed without actually writing data to the Volume.
247 kes Rework certain SD locking based on gdb tracebacks of deadlocks
248 sent by Eric. This code now uses only the volume_lock() rather
249 than the reservations lock when at EOM and acquiring a new
251 kes Ensure only one exit point in several subroutines.
253 kes Implement bsock code to permit locking. Use the new code in Verify
254 in the FD to prevent the heartbeat thread from disrupting the Verify
255 data sent to the Dir.
256 kes Modify SD locking to eliminate locking the reservations system from
257 outside the system. Use the volume lock when getting media data
258 and reserving a new volume at end of media.
259 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
260 when SD starts are not locked into place.
262 kes Fix error compiling runscript code on 64 bit machines.
263 kes Tweak Win32 mount point code.
264 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
265 cleared giving bad file estimate).
266 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
269 kes Keep Schedule run lists in order as suggested by
272 kes Implement autostart scripts for Debian.
273 ebl Implement upgrade catalog scripts.
275 ebl Apply jobstat patch for long term statistics. Have to implement
276 purge stats command and upgrade scripts.
277 kes Fix mtx-changer.in for broken Debian mt program.
279 kes Fix large number of JobMedia records reported by Eric Bollengier.
281 kes Apply doc fix from bug #1062.
282 kes Resolve crash and improper restore wx-console Win32 restore
283 GUI. Fixes bug #1065.
284 kes Update Win32 wxWidgets to latest version.
285 kes Attempt to do correct handling of Win32 mount points. Should
287 kes Fix Win32 FD backup/restore memory leak due to improper termination
288 of BackupRead/Write. This fixes bug# 1038.
290 ebl Reduce memory usage for accurate backup, working only with ctime
291 and mtime. (not all Lstat field)
292 About 40MB for my linux system (400.000 files)
294 kes Add dcr->reserved_volume flag that allows us to release a volume
295 even if it is not vol->released. This allows maxvol2 to work when
296 Volumes expire and we are already writing to the device (i.e. a
297 volume is pulled out from under us by another job terminating after
298 we reserve the drive).
300 ebl Permit multiple command/console per runscript definition.
301 RunScript { command = /bin/true ; command = /bin/false ... }
302 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
303 (restart an application) just after the VSS snapshot on windows.
304 kes Don't zap dcr values during release_volume() as they might
305 have the next Volume to be mounted.
306 kes Fix AIX prototype.
308 kes Second cut of drive switching during backup.
311 kes Update Win32 version of wxWidgets to most recent version.
312 kes Tweak Copy job details.
313 kes Rework dir_find_next_appendable_volume to make a bit more effort
314 to find a suitable volume before giving up.
316 kes Make ask_sysop_to_create... to return if waken from wait.
317 This helps get out of blocked conditions.
318 kes Experimental implementation of switch_device in reservations.
319 kes Implement FD version to allow easier protocol changes.
320 kes Add Plugin Options string -- not yet passed to FD.
321 kes Implement PluginOptions ACL.
323 kes Attempt to correct problems with restores with autochangers and
324 use counts going negative
325 kes Rework SD status command and implement API for bat. Implements
326 header, runing waitreservation, devices, volumes, spooling,
327 and terminated status keywords.
328 .status storage=xxx <keyword>
329 kes Clarify TLS error message by adding double quotes around name.
330 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
331 kes Pass jcr to tls routines so debug messages can be handled better.
332 kes Rework jobq resource allocation code, and possibly fix a bug
333 that caused reference counts to get out of sync.
335 kes Rename fd/dir plugin to use Bacula standard underscore.
336 kes Plugin work -- bring dir up to fd level.
337 kes Start implementation of VTL code
338 kes Fix Win32 build after adding new cats subroutine.
340 kes First cut at Duplicate Job implementation.
342 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
343 kes Start PluginOptions string, and refactor a bit of ua_run.c
344 ebl Apply Allan patch that permit to reset recyclepool.
346 kes Test patch -- possible fix or improvement for bug #1053
347 kes Refactor FD and SD status commands to permit new API code in
348 SD, and to fix Win32 build.
349 kes Win32 build is now working.
351 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
352 some ideas in patch from Scott Bailey.
353 kes Begin implementation of duplicate Job control.
354 kes Fix some of Win32 build after recent additions.
355 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
356 which causes the FD to detect whether or not the OS has the
357 honor no dump bit (*BSD systems), and if so, to skip backing up
358 any file with this bit set. The feature is enabled by setting
359 'honor no dump flag = yes' in the Options section of a FileSet.
361 kes Correct po warning message with datarootdir
362 kes Implement more code in dird.c to put configuration parsing in
363 a class rather than use globals.
364 kes Restructure SD status command for implementation of bat API
367 kes Suppress incorrect 'Will not descend from x into y' messages.
368 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
369 daemon globals used by parser.
370 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
372 kes Fix free of plugin_list when none exists.
374 ebl Apply accurate project patch.
376 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
377 on non-mempool object)
378 kes First cut of converting FD .status to work with bat API.
380 .status client=XXX header
381 .status client=XXX running
382 .status client=XXX terminated
383 kes Implement first cut of Copy Job.
384 kes Implement Catalog in Pool resource. It overrides catalog specified
385 in the Client resource.
387 kes Apply patch (with some difficulties) from Joao Henrique Freitas
388 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
390 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
391 ftruncate() actually works. In the case of some (cheap) NAS devices,
392 it does not, and so recycling NAS Volumes does not work. The code
393 simply unlink()s the file, then recreates it. This fixes bug #1011.
395 kes First incomplete cut of big malloc blocks for htable.
396 kes Tweak plugin code.
398 kes Plugin debug code + tweak a couple bat dialog layouts
400 kes Fix creating first JobMedia record during Migration to include
401 proper index. This caused slow restores of migrated jobs.
402 kes Temp fix to plugin name file_index.
403 kes Bacula backed up and restored a MySQL database.
405 kes Implement plugin restore.
406 kes Implement parsing of db_driver to give db_type index.
408 kes First cut of plugin restore code.
409 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
410 and do not strip paths on symbolic links.
411 kes Set catalog backup database and user name from values specified on
412 the ./configure line.
413 ebl Fix #1031 about wrong pool source information in job report.
416 kes Remove a redundant jcr argument to find_files, match_files, and
418 kes Implement '.status dir header|scheduled|running|terminated' that
419 prints the requested status section. With the exception of the
420 header, the other reports have fields separated by tabs (\t).
422 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
423 a resource embedded run command to find a since time if no explicit
424 since time was supplied on the command line.
425 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
426 that updates the state file at job termination time in addition to
427 when the daemon terminates.
429 kes First version where a plugin did a backup.
430 bpipe-fd.so created a backup file, wrote a test
431 string to it, and Bacua could restore this fabricated file.
433 kes Implement DB Driver = string for the DBI driver.
434 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
435 kes First cut of code for loading Win32 plugin dlls. Implement
436 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
437 and implement a dlfcn.h file based on opengroup's definitions of
440 kes First cut plugin directives.
442 kes Apply patch from bug #1049 to prevent stripping the path on a
444 kes Attempt to fix bug #1047 where stripping a path corrupts the
445 heap. Waiting for feedback.
446 kes Correct the Mount message not to suggest labeling a new tape
447 when doing a restore. Submitted by email by John Stoffel.
448 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
449 FD by using casting. Reported in bug #1042.
451 kes A bit of crypto cleanup. More later.
453 Release Version 2.2.8
455 kes Apply patch from Martin to correct bug #1040, bscan sets existing
457 kes Fixed important spelling error in doc -- bug #1045.
459 ebl Fix bextract to be able to extract non-portable Win32 data to
461 kes Move initialization of read/write res lock earlier in the code.
462 This fixes the crash with a null conf file. This fixes bug
464 kes Redefine CURES in lib/parse_conf to be URES and move it all
465 into lib/parse_conf.c -- this responds to bug #1042, but does
466 not fix it. The fix is not to compile with FORTIFY_SOURCE.
467 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
468 the trunk SVN. I don't think this was reported as a bug.
470 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
472 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
474 kes Add DataDespooling and DataCommitting status (committing is
475 the last despooling).
476 kes Finish implementation of new reservations code noted below.
478 kes Fix bsnprintf for float point numbers. I broke recently when
479 parameterizing some variables. This fixes bug #1036.
480 kes Undo recent reservations changes ... will apply them later
481 when they work better.
483 ebl Fixes #1034 which cause mysql to hang the connection after 8h
484 ebl Change default statistics target of filename.name and path.path
485 fields for PostgreSQL. This speeds lookup by indexes. Thanks
487 kes A few more tweaks to new reservation code. Make sure to clear
488 vol released flag when retaking volume. When reading label and
489 label is bad mark volume unused. When recycling, mark volume
490 unused so it can be renamed.
492 kes Fix reserve_volume() so it doesn't release a volume in use
493 (i.e. a volume entry not marked released). This should be
494 the last part needed to fix bug #1018.
496 kes Move Heartbeat documentation from Job to Director resource.
497 This fixes bug #1033.
499 kes Fix existing switch drive SD code to call autochanger to release
500 any old volume. This must be done to keep the autochanger from
501 releasing subsequently newly reserved volumes in doing a close().
502 This should fix bug #1018.
503 kes Fail if attempting to get console input in batch mode. This
504 should help fail RunScript console commands that are incomplete.
505 kes First cut implementing switch_drive() in SD (not actually called).
507 kes Implement first cut running console commands in a RunScript.
509 ebl Fixes bug #1028 where 'Selection Type' option was not usable
511 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
514 Release Version 2.2.7
516 kes Add new free_tls() entry point so that Win32 builds.
517 kes Fix compile warning in src/lib/util.c
518 kes Fix entry point for edit_job_codes() so that Win32 builds.
519 kes Fix seg fault Frank Sweetser reports in regression testing
520 on his systems. The problem was that the original author of
521 bsnprintf.c did not take into account the side effects of
522 using ++x in the argument to a #define.
523 kes Make SD protocol backward compatible with version 2.2.x.
525 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
526 because Bacula no longer restores sockets.
527 ebl Always use ignorecase fileset option on win32 FD.
529 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
530 that implements double quoting include names in conf files,
531 and also allows piping input by having the first character
532 be a vertical bar (|).
533 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
534 that implement %f in RunScripts to pass the FileSet name.
535 kes Skip leading | when lex input comes from a pipe as suggested
536 by Michael Stapelberg <michael@stapelberg.de>.
538 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
539 Nerijus Baliunas <nerijus@users.sourceforge.net>
541 kes Implement Plugin Directory and plugin events.
543 kes Implement a security enhancement: TLS authentication but no
544 encryption. Enabled by setting 'TLS Authentication = yes'.
545 Note when this is on, TLS encryption is turned OFF!
547 kes This patch corrects a problem where the maximum concurrent storage
548 jobs counter gets out of sync during restore jobs causing jobs to
549 'wait on max Storage jobs'. This patch fixes bug #1009.
551 kes This patch fixes bcopy so that it produces correct Volumes.
553 kes This patch eliminates spurious output to the console during a VerifyVolume
554 job that contains encrypted data. It fixes bug #1024.
556 kes This patch prevents the 'status dir' command from trying to use a scratch
557 volume and possibly moving it from one pool to another. This patch fixes
560 kes Add new include to postgresql.c suggested by Marc Cousins so
561 that it compiles correctly with pgre version 8.3.
563 kes Fix --archivedir addition to configure. Replace it with
564 --with-archivedir in configure.in This fixes the regression
566 kes This patch fixes bug #1012 where the job is canceled because
567 of Max Run Time exceeded when the job has not yet started.
569 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
570 one 'part' to write. Instead of each part being stored on disk,
571 written to DVD, then deleted from disk, all parts are written to disk,
572 and only the last is written and deleted from disk.
573 kes This patch fixes the status command to include the formating string for
574 JS_AttrInsterting. It fixes bug #1021.
575 kes This patch should fix the Mac OS X build problem on the latest
576 Darwin, where sys/types.h was not included correctly (apparently
577 due to a change in the Mac headers). The solution was to explicitly
578 ensure that it is defined for the ./configure.
579 This patch also has a rebuild of configure that includes the Debian
580 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
581 kes This patch should ensure that queued messages to the console are
582 displayed as soon as possible. It should fix bug 1007, but has been
583 reported not to work.
585 kes This patch fixes the infinite loop when trying to increase the
586 maximum number of volumes in a Pool during the add command.
587 This patch fixes bug #1008.
589 Release Version 2.2.6
591 db Remove extra data on estimate command in joblist for bat.
593 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
594 really change anything, but is the beginning of doing it *right*.
595 To do it completely right the LastWritten date must be passed to
596 the SD, but it is not yet done.
597 kes Minor tweaks to some bat restore SQL.
598 kes This patch fixes bug #1003 where putting the message output from
599 a Verify job into the catalog results in a recursive loop. The problem
600 seems to show up only with postgresql (to be verified).
601 kes Correct %x to %p in postgresql debug statement.
603 kes Fix bug #942 where lots of emails where generated when the heartbeat
604 interval was low and Bacula wanted a different tape from the one in
607 ebl Add new SD despooling attributes and Dir inserting attributes
608 job status codes in the catalog (Status table).
610 ebl Use qmake-qt4 instead of qmake when available (debian system).
612 kes Add a security warning to src/cats/make_catalog_backup.in indicating
613 that passing the password via the command line (arg 3) is insecure.
614 This responds to bug #990 (it doesn't fix it).
616 kes Set default debug_level to zero. This corrects bugs #991 and #993.
617 kes Fix a crash in bat when it cannot connect to the Director for example
618 if the Director is not running.
619 kes Remove redundant INDEX (JobId) from File table in the trunk.
621 kes Make explicit exception to GPL in LICENSE to permit linking
622 the Win32 FD with Microsoft VSS code.
623 kes Apply the Solaris package patch from
624 Masopust, Christian <christian.masopust@siemens.com>
625 kes Apply the patch to optionally add a timestamp in the debug output
626 submitted by Mariusz Czulada <manieq@wp.eu>.
628 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
629 backend (sql_strerror). Fixes bug #989
631 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
632 It applied with no problems.
633 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
635 kes Redirect stderror to stdin on mt status command in mtx-changer.in
636 since the status is returned on stderr on Solaris.
637 kes Activate Close button on tray-monitor window. This fixes
639 kes Check for NULL item in parse_conf.c before calling it. In the
640 case of Device, there is no item and this caused a seg fault when
641 Device appears in the conf file.
642 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
643 avoids pulling in config.h multiple times in some new code.
645 kes Fix spurious warning message printed when creating a volume with
646 a LabelFormat. This fixes bug #976.
648 Release Version 2.2.5
650 kes Add JobId in place of Job name in all the Jmsg() output.
651 kes Correct the APP_DESC for the Win32 storage service (remove an e).
653 kes Make maxvol-test and new more strict maxvol2-test work.
654 kes Print JobId in all Jmsg() job output.
656 kes Add new SD despooling attributes and Dir inserting attributes
657 job status codes. This fixes bug 961.
658 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
660 kes Fix doc issue. This fixes bug #963.
661 kes Fix listing performance problems in bat. Pointed out by
663 kes Remove old debug code.
664 kes Fix bat code that tests for Win32. This should fix bug #968
665 kes Query 5 list wrong Vol after migration. This fixes bug #960
667 ebl Fix #969 where user can't change Replace option in restore menu.
669 kes Save jcr in thread specific data (tsd) for each thread.
670 kes Make Dmsg() print JobId as -%u.
671 kes Make Jmsg, Emsg, and others automatically pickup the jobid
672 for the thread if it exists.
673 kes Remove old reservation debug jid code.
674 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
675 ebl Add an option that permit to specify spool size in job
676 definition. (Applying patches/testing/spoolsize_per_job.patch).
677 You must upgrade SD and DIR at the same time.
678 dvl Add new configuration item --archivedir
679 dvl Adjust regression tests to use tmp not /tmp. This will allow
680 multiple concurrent runs of the regression tests.
682 kes Fix race condition that drops final block written to volume.
683 This happens in rare cases with multiple simultaneous jobs
684 when the Volume fills. This fixes bug #964. May be related
685 to bug #935 and possibly #903.
686 kes Eliminate more strerror() and replace with bstrerror().
687 kes Remove BSD getopt and replace with unrestricted IBM version.
688 kes Fix Win32 build for changed calling sequences.
689 kes More tweaks to the mount volume routines to get everything
690 right. Changed variable name from find to have_vol, which is
691 much easier to understand.
692 kes Enhance btimer debug code.
694 kes Fix FD->SD authorization failure, which was due to spurious
695 wakeups from a pthread_cond_timedwait(). Simply check the
696 predicate before continuing. This fixes bug #953.
697 kes Add const char where needed (more to do). Remove temp debug code.
699 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
700 kes Don't overwrite error message in check_tables_version.
702 kes Unlock batch insert tables with same calls used elsewhere.
703 kes Allow starting 59 jobs a second.
704 kes Make SD session key more random.
705 kes Add retry for SQLite opening db if it fails. Probably helps
707 kes Suppress extra error messages during batch insert failure.
709 kes Add jcr to timer packets so if killed message can be sent to job.
710 kes Add JobId to all Dmsg() output.
711 kes Put some FD auth code on dbglvl rather than fixed.
712 kes Return insert attributes error message in db msg buffer to avoid
713 false error messages. Helps fix bug #966.
714 kes Separate batch init error messages. Probably helps fix bug #966.
715 kes Make SD code that contructs attribute insert check string lengths
717 kes If Dir gets an error during inserting attributes, cancel SD.
718 This reduces unnecessary error messages.
720 kes Correct search boolean for getting Volume info
721 ebl Cleanup batch insert code. Probably fixes bug #965.
722 kes Back out one small change to the reservation system (reserving a volume).
723 kes Rework how a Volume is mounted. It is now much more intelligent and
724 will always attempt to use any mounted volume if possible and reduces
725 calls to the Director asking about volumes.
727 kes Turn off some code when batch insert not enabled.
728 kes Edit FD name in connect error messages.
729 kes Rework the reservation system to take into account that the Director
730 might give us a Volume that is different from the current one being
731 used, and to ensure that we don't exceed Maximum Volume Jobs.
732 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
733 fatal error with multiple jobs running'
734 kes Add more debug code in reservation system.
735 kes Implement maxvol-test to check bug #947.
737 kes Add code to handle tray monitor separated from Win32 FD.
738 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
740 kes Add missed return in fixing verify bug -- trunk only.
741 ebl Fix a command parser issue causing a director segfault.
742 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
744 kes Increase the max block size to 4MB fixes bug #957.
745 kes ERABT if user sets min block size > max block size. Fixes bug #956.
746 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
747 is not properly mounted (recognized) during a poll.
748 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
749 Job that has differences reports Verify OK.
750 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
752 ebl Add an option to operate on all pools with update vol parameters.
753 This complete the project 20. Patch from Nigel Stepp.
754 ebl Add history support to bconsole when using readline.
755 Using Ctrl-D to exit doesn't update .bconsole_history
756 kes Modify new volume algorithm to use max MediaId for generating next
757 volume number rather than the count of Volumes. This should essentially
758 eliminate the failure rate if some volumes were deleted. Bug #921.
759 kes Begin implemention of Optimize Job Scheduling.
760 kes Implement restore callback that Dirk and I agreed on for bat
761 restore. This fixes bug #928. Restore of backup of zero files fails.
762 kes Fix SQL Catalog logging which broke with new db_escape_string
765 Release Version 2.2.4
767 kes Fix bacula_cats.def for new db_escape_string().
768 kes Increase size of name string when FD making connection to SD.
769 May fix bug #953. FD->SD connection failure.
771 kes Add code to help Dan debug 2drive-incremental-2disk test.
772 kes Add code to try to fix bug #908.
773 kes Add waits to multiple exit detection code to try to force pid
774 file to always be deleted.
775 kes Restore good dev.tar.gz to rescue set appropriate binary property.
777 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
778 trying to switch drives by checking for blocking before unblocking.
780 kes Cancel storage daemon in all cases where FD reports error. This
781 should fix virtually all cases of bug #920.
782 kes Fix db_escape_string() for MySQL which did not compile.
784 kes Fix error message that was clobbered when Dir tells SD it does not
785 have write permission on Volume. This should fix a minor point
786 in bug #942, but not the main problem.
787 kes Add code to cancel job in SD if FD connection fails. This should
789 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
790 dvl Pass jcr and db into db_escape_string() to enable better escaping
792 kes Fix migration code to get correct Volume name with multiple volumes
793 by skipping |. Fixes bug #936.
794 kes Implement patch supplied by Landon to fix bug #944 where using
795 TLS with bconsole uses 99+% of the CPU.
796 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
798 kes Move patches into patches directory.
800 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
803 ebl Using 'm' in bconsole will show messages like before,
804 and not memory usage.
805 kes Fix bug #935, and probably also bug #903 where files were not
806 restored. MediaId was not properly set in JobMedia record after
809 kes Suppress chown and chmod error messages if the FD is not running
812 kes Apply Martin Simmons' patch that should turn off the new API usage
813 when batch insert is turned off allowing building on older
815 kes Add ./configure search in qwt-qt4 for qwt package
817 kes Bacula is now free of 3rd party GPL copyrighted code!
819 kes Add guid_to_name.c/h which replace idcache.
820 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
822 ebl Detect if new PosgreSQL batch insert API is present.
823 kes Correct incorrect mempool call causing Director crash. Occurs on
824 systems without va_copy().
825 sb Update spec files for 2.2.1 release
827 kes Fix memory pool call in ua_output.c. bug #934.
828 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
829 Add test program to fnmatch.c
831 kes Integrate patch to README.vc8 from
832 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
833 edit it to get it into Unix patch format.
834 kes Implement mkpath.c to replace old FSF makepath.c
836 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
838 Release Version 2.2.1
840 kes Update POTFILES.in
841 kes Cleanup a few underquoted AC_DEFUNs in configure
842 kes Apply patch from Martin Simmons that adds a test for va_copy to
845 kes Fix bug #921 by increasing the number of tries to create a new volume
847 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
848 can be called multiple times. Implement a version for machines
849 without va_copy() that gets a big buffer.
851 kes Integrate more portable zone offset code into bsmtp.c
852 Submitted by Attila Fülöp.
854 kes Fix bad SD->FD return status reported by
855 (James Harper) <james.harper@bendigoit.com.au>
856 ebl Fix a bug in read_close_session which return random status
857 thanks to James Harper
859 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
860 and directory names during restore of single file/directories.
861 kes Add sanity checks to .sql command when string is empty. Hopefully
862 that will resolve Dirks Director crash.
864 kes Apply patch submitted by Martin Simmons that corrects a seg fault
865 in the bsmtp chat subroutine when debug is >= 10.
867 kes Fix Director crash when running bat SQL queries.
868 kes Add David's notes on Item 8: Copy pools.
870 kes Rework projects file to be current and ready for a vote.
871 kes Enhance lex scanner error message.
873 kes Tweak LICENSE file to mention BSD code.
874 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
875 if specified on the ./configure.
876 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
877 This class is intended to allow us to open a second bsock to the
878 Director while in the restore subdialog.
880 kes Fix configure to create bat Makefile before creating dependencies.
881 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
882 kes Add a tooltip to the tray monitor.
883 dvl Set the Director's PID file before dropping privs. This fixes
886 kes Update AUTHORs file
887 kes Increase the default max concurrent jobs to 20 in FD and SD to
888 correspond with the default .conf files.
889 kes Rewrite the Win32 service routines. This eliminates the 3 copies
890 some different, of the same file created by RN when porting the
892 kes Rearrange some of the Win32 directories and the placement of the files
894 kes Set DEVELOPER flag in version.h
896 ========================================================================
897 Release Version 2.2.0
899 kes Apply a second doc patch from Marc.
900 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
901 improves the tips section that discusses how to setup multiple
904 kes Update bat README file.
905 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
906 corrects a typo in the Recycle status check in db_find_next_volume().
907 This will probably fix a number of annoying problems with multiple
909 kes Modify most of dird/msgchan.c to use bsock class calls rather than
910 bnet calls -- no functionality change.
912 kes Modify the Verify output to specify if files are missing on
913 the Volume(s) or disk. Fixes confusion in bug #916.
914 kes When more than one Volume is read in a migration job, the last
915 Volume bytes reported are from the last read volume rather than
916 the last written volume. Fixed. This fixes bug #910.
917 kes Fix display of Recycle flag after update volume=foo recycle=yes.
918 It previously printed New Recyle flag is: no. This fixes bug
921 kes Correct seg fault when switching tape drives during restore.
922 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
923 be used until after 2.2.0 release.
925 kes Remove fnmatch() in SD that permitted wild card specifications.
928 kes Fix %g in filename returned by SQL for browse tree reported by
930 kes Fix configure so that it puts config.out in the cwd rather than
932 kes Attempt to fix the locking problem reported by Eric in bug #906.
933 kes Make berrno class to leave errno unchanged after constructor call.
934 kes Make bnet_server use the heap rather than the stack to allocate
935 its socket fd pointers to avoid a crash at termination. Problem
936 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
938 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
939 and putting it in depkgs-qt along with Qt4.3.
941 kes Rework code in acquire.c that switches drives for reading when
942 the Media Type does not match. This should fix bug #906
944 ebl Fix a director segfault during job setup #907
945 kes Correct seg fault in postgresql when first operation returns no
946 rows. Fixes Dirks File browser problem seg fault with bat.
948 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
949 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
952 kes Implement PopUp YES/NO dialog for bat.
954 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
956 kes Correct RunScript to terminate job in FD on failure.
957 kes Change abort_on_error and AbortJobOnError to fail_on_error
958 and FailJobOnError in RunScripts.
959 kes Minor tweaks of code formating in RunScripts, principally to
960 avoid depassing 80 columns.
962 kes Eliminate one #ifdef Win32 in bsmtp
963 kes Implement grow tool to grow a file for testing very large databases.
964 kes Add big-vol-test to test Bacula seeking with > 5GB.
967 kes Modify find_next_volume() to return all values in Media record.
968 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
972 kes Update Release notes
974 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
975 Warning, in previous beta version, all media get from scratch keep their
978 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
979 This should fix bug #842. Made a note to look at removing the temp
980 files at the end of the install.
981 kes Add ability to mount and unmount a file device providing it is
982 marked as being removable and has the appropriate mount and unmount
983 commands defined in the Device resource. This fixes bug #830.
984 kes When applying a storage override, release all previous storage
985 definitions rather than just prepending the new storage.
986 This should prevent a good deal of confusion.
988 kes Implement ./configure search for qwt libraries.
990 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
991 Win32 FD. This should fix bug #893.
992 kes Remove an unnecessary beep in Win32 init code.
993 kes Update copyright dates in Win32 executable about boxes.
994 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
995 code with a BSD getopt.c and getopt.h.
996 kes Remove sched.h from the Win32 compat directory -- not used.
997 kes Remove the Exit menu item from the Win32 tray monitor. If you really
998 need to shut it down, do it through the services panel or the command
1000 kes Remove some inappropriate Bacula FSFE copyrights.
1001 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1002 kes Fix regress config non-portable test as pointed out by
1003 Florian Heigl <florian.heigl@gmail.com>
1004 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1005 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1007 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1008 Reported by Frank Sweetser.
1012 kes Fix client-only build.
1013 kes Integrate client-only fixes for bsys (initgroups) and conio from
1014 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1015 kes Make arguments to get_scratch_volume() in same order as other
1017 kes Rework the prune_volumes() subroutine so that after purging and
1018 no volume found in desired pool, it will check for a scratch
1019 volume. This prevents recycling the whole scratch pool.
1020 kes Add code to status storage to print boffset_t (largefile support).
1022 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1023 kes You now need a --with-qwt=<dir> to be able to build bat.
1024 kes Update src/win32/cats/bacula_cats.def to include the new
1025 db_get_query_dbids() call on Win32.
1027 kes Correct a problem when selecting a scratch volume and moving
1028 it to another pool that lost some columns.
1029 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1030 kes Enhance Autochanger error messages to include Volume and device name.
1031 kes Rework prune_volumes() code to take account of InChanger flag,
1032 and to handle recycling volumes going to the Scratch pool and
1033 current pool because the RecyclePool directive.
1034 kes Implement a better and more efficient db_get_query_dbids() to
1035 handle creating and passing back a list of DBIds.
1039 kes Start work on new more efficient DBId subroutine. First use
1040 will be for recycling volume to Scratch inchanger.
1041 kes Increase number of JobIds in pruning from 1000 to 10000.
1042 This to be replaced by above routine.
1043 kes Begin implementation of building Qt4 on Win32.
1044 kes Correct typo in fix I added for bad TLS shutdown.
1045 kes Pull 2.0.3 patches into patches directory.
1046 kes Update Release notes. Include qt-console in line count.
1047 kes Update Projects file.
1049 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1050 bug in migration code where a job that spanned two volumes
1053 kes Implement new BST_DESPOOLING blocked state. Change from locking
1054 during despooling in SD to blocking. This means that other threads
1055 can work with the device structure, in particular the reservations
1056 system while despooling.
1058 kes Fix return in reservation message queue that missed clearing
1059 the jcr lock (implemented 26Jun07 below).
1060 kes Rename a number of dev methods to make locking function names
1062 kes Document locking in lock.c. Move lock structures to new file
1065 kes Move reservations message lock to lock jcr only this
1067 kes Move main SD locking code into lock.c (new file).
1068 kes Update Win32 build to include lock.c
1072 kes Dirk committed the qwt library code for drawing graphs in bat.
1073 kes Tweak install of qwt so that it is integrated with ./configure.
1075 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1076 out by Eric (my typo).
1077 ebl Fix configure.in to get batch mode enable
1078 kes Return correct string from authenticate.cpp in bat when connecting
1080 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1081 spurious line drops when using TLS.
1082 kes Do not file reparse points when restoring a file that already
1085 kes Implement Windows reparse points -- similar to directories, but
1086 we do not descend into it. This is a first cut. They seem to
1087 be backed up, but restore is not yet tested.
1088 kes Remove restore_blocking in tls code when shutting a socket to leave
1089 it in blocking mode. Hopefully this will fix the encryption bug
1090 reported by Frank Sweetser.
1091 kes When opening a file for backup, tell the OS that we are going to
1092 read it sequentially -- optimization.
1093 kes Change variable names in authenticate_director() to not conflict
1094 with member names in bat. Caused great confusion with compiler,
1097 kes Queue openssl error messages in case of comm problem.
1098 kes Do shutdown() call if socket terminated.
1099 kes Remove some duplicated code in tls.c
1100 kes Move more of the bsock member variables into private and access
1102 kes Add Frank Sweetser's tls-test to the regression suite.
1104 kes Add Swedish sv.po file
1106 kes Don't print clock skew message in FD if less than 3 seconds diff.
1107 kes Add a bit of VSS info to status client.
1108 kes Implement a first cut of Vista VSS, using Win2003 code.
1110 Release: 2.1.20 beta
1112 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1113 loaded tape but uses first drive).
1114 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1115 This was indeed a Win32 issue.
1117 kes Simplify search of autochanger for in-use Volume.
1118 kes Fix exit condition of check for in-use volume. kes Remove
1119 inappropriate my_postgresql_free_result() in db_close()
1121 kes Fix bad return in FD when encryption signature not found.
1122 Probably caused a crash.
1123 kes Inhibit missing encryption signature error messages for
1124 file types where no signature computed.
1125 kes Correct inverted check on autochanger in reservation system.
1126 kes Tweak debug code in autochanger reservation.
1128 kes Add some additional locking in the cats directory in subroutines
1129 that modify packet variables called from batch insert.
1130 kes Rework how dcrs are allocated. new_dcr() can now be called
1131 with an existing pointer, and it will simply clean it up.
1132 This allows the reservation system to test various different
1133 devices, and will permit easy device changes.
1134 kes A bunch of changes all over to handle new new_dcr() calling
1136 kes Work more on the Volume management in the SD. Remember Volumes
1137 for tape drives and for autochangers (even virtual disk changers).
1138 kes When looking at the Volume list to reserve a drive, handle
1139 autochanger names correctly by interating through the changer
1140 devices. Also call the Director to see if a Volume is suitable
1141 for the current job.
1142 kes Fix some bugs in bscan. Make sure all media records are written.
1143 Make sure that valid JobMedia records are written for disk files.
1144 Previously they were completely wrong.
1145 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1146 that the URLs don't change and so that the developers will all
1147 work off the same copy. Rebuild from scrach.
1148 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1150 Release: 2.1.18 beta
1152 kes Fix seg fault in FD from incorrect digest size.
1153 kes Fix argument to non-OpenSSL crypto.c subroutine.
1155 Release: 2.1.16 beta
1157 kes Remove a few malloc()s from the encryption code.
1158 kes Use the class calls to bsock in filed/backup.c and restore.c in
1159 place of the old bnet_xxx code.
1160 kes Implement code that does an on the fly calculation of the
1161 signing digest during restore of encrypted files. It makes
1162 a best guess at the algorithm, and if it is not correct, will
1163 then revert to the old code which reads the file after it is
1165 kes Implement at least one missing crypto stream in stream_to_ascii()
1166 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1167 #877 where a reload with bad syntax causes Dir to exit.
1169 Cut: 2.1.14 beta (not released)
1171 kes Do not free a volume on a tape drive until another volume is
1172 mounted and read, or the autochanger unloads the volume.
1173 This should help the SD re-use volumes that are already mounted,
1174 and should fix bug #886.
1175 kes Apply patch from user brettedgar that allows gnome2-console include
1176 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1177 kes Apply patch from Lucien Weller that fixes day of week calculation
1178 because of DST flag problem. Fixes bug #887.
1180 kes Move find_next_appendable_volume() to after acquiring a valid device
1181 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1183 kes Unable to reproduce bug 872. However added additional testing for
1185 kes Bug #874 resolved by documenting SQLite limitations.
1186 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1187 kes Bug #881 resolved by removing typo in mtx-changer script.
1188 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1189 approval. Added a link to the wiki on the web page, and implemented
1190 a backup from http://paramount.ind.wpi.edu
1192 kes Fix update allfrompool to pass pool name.
1194 kes Convert to pure GPL v2 license.
1195 kes Fix sscanf problems reported by Peter Buschman that caused
1196 a bus error on Solaris.
1197 kes Rework (simplify) the select prompt in bat.
1198 kes Move get_jobid_from_tid() into lib and create a
1200 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1201 should definitely fix the problem of lost error messages in the
1203 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1204 kes Eliminate tcpd.h from the project. Enclose the #include from the
1205 library with extern C ...
1206 kes Add print of signal name when a signal is trapped.
1208 Release: 2.1.12 beta
1210 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1212 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1213 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1214 makes SQLit3 run 30 times faster, though a bit less safe.
1215 kes Implement --with-batch-insert in configure and detection of thread
1216 safe libraries. It is on by default, but turned off if no thread
1217 safe library (e.g. SQLite 2) is available.
1219 kes Fix Bacula PostgreSQL buffer overruns.
1220 kes Do better checking for NULL results returned from PostgreSQL;
1221 implement retry for failed queries; clear results buffer after
1222 failed query. Hopefully this will correct the PostgreSQL failures.
1224 kes Implement algorithm to handle only one appendable volume with
1225 Prefer Mounted Volumes = no.
1226 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1227 returned from a query.
1228 kes Make volume lock recursive.
1229 kes Implement an additional volume reservation algorithm that
1230 starts by considering all reserved volumes then uses the
1231 old brute force algorithm of searching the resources to
1232 find a suitable device.
1233 kes Add new reservations debug code and refine the old code.
1234 kes Update the win32/dll/bacula.defs file.
1236 kes Tweak reservations algorithm to permit a few more cases, i.e.
1237 volume reserved, but on different drive, ...
1238 kes Enhance SD status to include Pool and Media Type for drive in a
1239 more readable format (a bit longer).
1240 kes Fix PostgreSQL double free.
1242 kes Minor refactoring of restore decryption code.
1243 kes Add code to smartall.c to detect double free of a buffer.
1245 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1246 so that bsmtp will create a correct email address (mailbox only).
1247 kes Modify 'memory' command so that the buffers are listed as 'In use'
1248 to avoid confusion with Orphaned buffers.
1249 kes I reworked the OpenSSL include/lib flags to be handled in
1250 the standard Bacula way, which should fix bug #863 concerning
1251 non-standard OpenSSL libraries.
1253 kes Implement Help Browser window for bat.
1254 kes Fix reload bug that reset StorageId to zero.
1256 kes Fix TLS #ifdefing when TLS turned off.
1257 kes Ensure that when labelling a tape with Slot=0 that InChanger
1259 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1261 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1262 add DISTINCT (required by PostgreSQL).
1263 kes Implement BSOCK authenticate_director() method. Eventually will
1264 authenicate all daemons.
1265 kes Move several more functions into the BSOCK class.
1267 kes Add code to tell the OS that we no longer need a cached
1268 file that we were reading. In findlib/bfile.c. Also,
1269 only cache files that we are reading. Thanks to
1270 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1271 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1272 kes Implement script to automatically generate cats and dll .def
1273 files for Win32 dll.
1274 kes Update README.mingw32 to include new .def file generation.
1275 kes Correct typo in UTF-8 error message as reported by:
1276 jhernandez <julianhernandez@gmail.com>
1277 kes Add additional sm_check() code on debug level 1.
1278 kes Set default debug level to 1.
1279 kes Trap SIGABRT in attempt to get traceback.
1281 kes Reduce bat connect timeout from 30 to 15 seconds.
1282 kes More restructuring and implementing BSOCK class in place of
1284 kes Remove a few unnecessary malloc() tests in crypto code.
1285 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1286 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1287 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1289 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1291 kes Fix Verify InitCatalog. The attributes were not pointing to the
1292 correct saved location.
1293 kes Implement message callback so that GUI is sure to get all
1294 daemon messages. Currently displayed in a dialog in bat.
1295 kes Ignore SIGUSR2 (Bacula timer) in bat.
1296 kes Apply regress patch from bug #859 to allow regress to work
1297 with Solaris compiler.
1299 kes Begin adding TLS support to bat.
1300 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1301 clean up lex.c and make it more readable.
1303 kes Move more bnet functions into the BSOCK class.
1304 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1305 kes Complete change of berrno strerror() method to bstrerror()
1307 Release: 2.1.10 beta
1309 kes Cleanup incorrect email addresses in bsmtp.
1310 kes Make bat display initial messages rather than discard them.
1312 kes First cut of adding .mod to the run command.
1313 kes Implement auto display of messages in bat.
1314 kes Enhanced preferences to allow all Bacula output to be
1317 kes Try to make bsmtp date routines more generic.
1318 kes Fixed bug #856 autochanger documentation.
1319 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1320 kes Add new cats entry point so Win32 builds.
1322 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1324 kes Do better checking for the MySQL 64 bit libraries looking for both
1325 .a and .so libraries.
1326 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1327 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1328 kes Require the thread safe version of MySQL during configure. Thanks
1329 to Andre Noll for pointing this out.
1330 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1331 continuing in migration code.
1332 kes Apply implementation of tray-monitor font derived from gnome-console
1333 submitted by Andreas Piesk <a.piesk@gmx.net>
1335 kes Eliminate important memory loss in SQLite
1336 kes Fixed the batch insert MySQL thread specific data that was not
1337 being freed. See cats/mysql.c:db_thread_cleanup().
1338 kes Fix restore before command.
1339 kes Convert old hdr.name to name() in a few places.
1340 kes Implement update jobid command.
1341 kes Return all time_t dates in db_get_job_record()
1342 kes Stop watchdog in SD earlier.
1343 kes Put Pool just after Storage in please mount message.
1344 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1347 kes Update the po files.
1348 kes Fix Verify InitCatalog by making it cache attributes.
1350 kes Change name bacula-bat to bat for man 1 page to correspond to
1352 kes Check for client and store NULL pointers in status command. This
1354 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1355 kes Fix sign extended editing of %p.
1356 kes Clean out a little old #ifdefing in cats/mysql.c
1358 kes If time diff between DIR and FD is more than 600 seconds convert
1359 INFO message to WARNING.
1360 kes Implement heap size display in status for all daemons.
1361 kes Attempt to fix MySQL db open memory loss (not successfull).
1362 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1363 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1364 Query. This looks like a MySQL but but by doing extra releases,
1365 the memory goes away. This should fix bug #847.
1367 kes When backup fails, cancel SD before waiting for sd termination.
1368 kes If SD is waiting for FD to connect during cancel, wake up the
1370 kes Fix fsf code so that errno is correctly reported.
1371 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1373 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1374 so that Bacula doesn't later stumble into a seg fault.
1375 kes Use the term Restore Client in the restore Job report.
1376 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1377 the original job's FileSetId.
1378 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1379 spooling in migration jobs. Not yet tested.
1380 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1381 reading conf file from a pipe. However, do it with open_bpipe()
1382 rather than popen. Not yet tested.
1384 kes Fix an ugly bug where the VolCatBytes were getting updated
1386 kes Implement bconsole memory command that prints current memory
1387 usage, plus smartalloc dump.
1388 kes Clarify some error messages in backup, admin, and migrate.
1389 kes Shrink label dialog to smaller size.
1390 kes Invert Cancel OK buttons on restore to be OK Cancel.
1391 kes More strerror() to bstrerror() conversions.
1393 kes Start implementing bstrerror() in place of strerror().
1394 kes Stripping path -- seems to work.
1396 kes Prevent door and port files from being restored (mostly
1398 kes Free an unreleased buffer in compat code.
1399 kes Change console Job name from *Console* to -Console- to eliminate
1400 Win32 filename problems. Put Win32 path separator when creating
1401 Console file. This fixes bug #846.
1402 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1404 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1406 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1407 to force Win32 error message.
1409 kes First cut strip path. The data should be passed to the FD,
1410 but nothing is done with it yet.
1411 kes Enhance the digest and signature routines in the crypto
1412 library to accept a JCR and to use it to print error messages
1413 so that they will go in the Job report rather than the daemon's
1415 kes Simplify some of the verify signature code.
1416 kes Simplify a few of the alternative returns in the signature
1419 ebl Use only POSIX regex instead of GNU regex in breg.c for
1420 File relocation. It fix broken freebsd compilation.
1421 kes Convert all other Dir files to use new ua class message
1423 kes Tentative fix for missing digest signature in bug 807.
1424 kes Correct handle problem in new win32_ftruncate routine.
1425 kes Convert ua_purge.c and ua_update.c to use new ua class
1426 message routines for bat.
1428 kes Correct incorrect installation of LICENSE in Win32 installer.
1429 kes Display LICENSE at the beginning of the Win32 install.
1430 kes Attempt to correct the need for the png files to be installed
1432 kes Reapply my bat.conf install script in qt-console. I think I
1433 editted bat.pro instead of bat.pro.in and it was lost.
1434 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1435 the /var/lock/subsys for subsysdir. Also corrects typos in the
1438 kes First cut update job.
1439 kes Correct configure to include qmake of src/qt-console directory.
1441 kes Make restore job yes/mod/no print in one command so GUI works.
1442 kes First cut implementing backup and restore client.
1443 kes Correct editing in Verify output that caused a seg fault.
1445 kes Insure that bat.conf is not overwritten during installation.
1446 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1447 while I was implementing migration in March 2006 !
1449 ebl Cleanup file relocation, using char *RegexWhere instead of
1450 char *where + bool where_use_regexp
1451 kes Update some manpages and add bat manpage.
1452 kes Make a first cut at converting bacula.spec.in for bwx-console
1454 kes Apply patch from John Goerzen to add hostname as fourth argument
1455 to make_catalog_backup script.
1456 kes Fix typos I introduced into bsmtp.c
1457 kes Make pm_strxxx() routines handle input of NULL pointer. This
1458 is to protect from NULL pointers returned from SQL databases.
1459 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1460 kes Add more debug to FIFO code -- fix fifo regression test.
1462 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1463 kes Add thread timer to bnet_connect() to break from OS if wait time
1466 kes Update Win32 build to include new files, new symbols, and
1468 kes Implement socket level heartbeat (tcp_keepidle)
1469 ebl Commit File relocation patch
1470 kes Make bat have 'make install' target.
1471 kes Warn during install if old gnome-console binary found.
1472 kes Warn during install if old wx-console binary found.
1473 kes Add -8 option to bsmtp command line to add content type utf-8.
1474 Fixes bug #809. (Character coding problem in bsmtp).
1475 kes If < is found in target (from, to, cc) then do not enclose the
1476 target in < > in bsmtp. Fixes bug #772 (malformed address).
1477 kes When printing certain items in dbcheck, stop after 300000.
1478 Fixes bug #822. (dbcheck loops).
1479 kes Incorrect status in Dir after waiting for mount with poll set.
1482 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1484 kes Print waiting to reserve a device every 5 mins.
1486 kes Don't call close_part in label.c if tape and relabel.
1487 kes Don't free volume if busy in close() -- should help with
1489 ebl Fix #824 RunScript bug (After script could be execute twice)
1490 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1491 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1492 Add a regression script to test RunScript
1494 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1497 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1498 deprecated. No additional bugs will be fixed, and they will be dropped
1499 in a future release (probably 2.4.0).
1500 kes Change name of wx-console to bwx-console to make it more Bacula
1502 kes Change the name of gnome-console to bgnome-console to make it
1505 kes Some time in March, a Feature Request with patch from Jorj Bauer
1506 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1508 The ability for the director to validate a Client (FD) CN against
1509 an arbitrary set of patterns rather than the hostname, with
1510 A new 'TLS Allowed CN' set of directives which are implemented
1511 in the Client resource. Then pattern matching is used in place
1512 of hostname matching against the Certificate's CN. As an example, we
1513 have certificates which (a) use a local CA, and (b) have a CN of the
1515 kes Add new/changed entry points to Win32 build
1516 kes Create unaccepted-projects for projects that are not accepted.
1517 kes Simplify locking in the reservations system.
1518 kes Add more debug code in reservations.
1519 kes Make sure error condition on reserving a volume is handled correctly.
1520 kes Correct handling of volume_in_use.
1521 kes Correct handling of initializing a device.
1522 kes Move handling of broadcasting releasing a device into release_device().
1523 kes Correct attaching dcr to dev so that it is only done if device
1524 is properly initiated.
1526 kes Locking debug level tweaks in SD.
1527 kes Tweak new Volume code.
1529 kes Add exec external-command [wait-seconds] to bconsole. This
1530 executes the external-command. Note! normally external-command
1531 should be enclosed in double quotes.
1532 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1533 it should normally be off in a production system.
1535 kes Implement die command for SD so that we can force it to dump.
1536 kes Implement SD lock debug code.
1537 kes Implement new algorithm for keeping Volume list in SD. It
1538 is now owned by the device.
1540 kes Implement new code for freeing in use volumes that should
1541 resolve if not all, some of the problems of multiple drive
1542 tape conflicts described in bug 801.
1544 kes Fix gui/bacula-web/images files in svn.
1545 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1547 ebl Fix a bug in batch mode (in string escape)
1548 kes Correct migration prune SQL typo that crept in in a
1549 recent 2.1.x change.
1551 kes Move bnet_despool() into class in bsock.c
1552 kes Modify job report to include director name and Build OS.
1553 kes Move drop root privilege and check_catalog() before fork.
1554 kes Add update database scripts (version 9 to 10) to updatedb directory.
1556 ebl Check size and age of each file after its backup to see if
1557 it has changed during backup, if 'checkfilechanges' is set.
1558 The FD will do an extra check (stat(2)) after
1559 each file backup. mtime, ctime and size are compared with
1560 'before backup' information. If time or size mismatch, an
1561 error message will be generated. You must upgrade FD to use it.
1563 kes Make database name and user configurable
1564 --with-db-name=xxx --with-db-user=xxx
1565 kes Add back database type to message.c for debugging.
1567 kes Implement dir_sql() which issues an SQL query.
1568 kes Modify bat medialist to use dir_sql() and do some minor C++
1569 formatting as well as eliminating a number of pointers, simplifing
1572 kes Fix some of the mtx-changer grep commands for tape label readers.
1573 kes Convert a number of bsendmsg into the appropriate send/warning/error
1574 message class calls.
1575 kes Suppress the using database message in the .sql command.
1576 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1578 kes Add context menu for floating a window.
1579 kes Some minor cleanup and name changes in qt-console
1580 kes Add doing mt setblk 0 in Win32 mtx-changer.
1581 kes Apply Martin's bug fix to move definition of ENODATA for
1583 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1584 sqlite2 and sqlite3.
1586 kes More pruning cleanup.
1587 kes Turn on wait_for_drive by default in mtx-changer.
1588 kes Turn on Batch insert code by default as it now passes regression.
1589 kes Add ./configure --enable-bat to enable building of Bat.
1590 No install yet though.
1592 kes Implement a new .sql command for bat.
1593 kes Implement code to turn off pruning in obtaining the next volume.
1594 Pruning is turned off for the status dir command, but turned on
1595 for SD requests and for the list nextvolume command.
1597 kes Correct Qmsg() that was not updated correctly when committing a
1598 previous change (probably the recent TLS patch).
1600 kes Write new subroutine is_volume_purged() that explicitly checks
1601 if the Volume is purged, and if so marks it as such. This should
1602 resolve problems reported about needing to mount twice to recycle
1604 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1605 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1606 amount of duplicated code.
1607 kes Do volume pruning only for the Media Type desired (reduces pruning time
1608 if multiple Media Types are in the same pool).
1609 kes Implement more detailed info in the Job report for the Bacula version
1611 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1613 ebl Add bbatch tool to bench database and insert mode.
1614 Fix sql quote stuff in batch mode
1615 Fix sql stuff for mysql
1617 kes Correct problems with am/pm scheduling. Fixes bug #808.
1618 kes Implement new prunning code that prunes up to 1000 jobs at
1619 the same time. The same technique can be applied to a number
1620 of other prune/purge subroutines.
1621 kes Add an insanity check when starting a new tape job to ensure
1622 that the tape position has not been changed. If so fail the
1624 kes Fix Win32 build for dlls to add the folllowing:
1625 src/lib/bsock.c -- new file with new entry points
1626 src/lib/dlist.c -- new entry points
1627 src/cats/sql_create.c -- new entry point
1628 src/cats/sql_cmds.c -- new DATA item exported
1630 ebl batch mode cleanup bscan-test is ok now.
1631 kes Implement SD code to check length of disk volume before appending.
1633 kes Correct return status on db_batch... routines.
1634 kes Add call to db_write_batch_file_records() to migration code.
1635 ebl Fix AfterJob timing
1636 kes Move the checking of the database in initializion of the Director
1637 to after we drop privileges. This avoids the need for both root
1638 and bacula access to the DB.
1639 kes Correct a misplaced variable definition in src/filed/backup.c
1640 kes Correct how the new batch insert db_create_attributes_record()
1641 uses the arguments. Caused a seg fault in bscan.
1642 kes Implement lock() and unlock() methods in DEVICE class.
1643 Implement block() and set_block(xx) methods in DEVICE class.
1644 kes Modify bnet_connect() so that it uses time() to check for the
1645 wait time expiring (on some OSes, some system calls may not
1646 return immediately).
1647 kes Modify Verify to obtain the previous JobId when it is actually
1648 running rather than at schedule time (as it was in 1.38.x).
1649 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1651 kes When checking pid in pid file, continue running if the pid is
1652 the same as ours. This occurs on IRIX after a system crash.
1655 kes Extend new GUI API.
1656 kes Make the ua structure a class, and implement send_msg(),
1657 error_msg(), warning_msg(), and info_msg().
1659 kes Apply fix from for building wx-console on the Mac from
1661 kes Implement new select mechanism for GUI programs.
1662 kes Reorganize initialization of stackedWidgets in bat.
1664 kes Add updated nagios plugin supplied by Christian Masopust.
1666 kes More bat implementation.
1667 kes File migrate bug with Pool Occupancy using mediaid instead
1668 of jobids. Fixes bug #795.
1669 kes Fix orphaned buffers in filed backup and verify due to
1670 crypto buffers not freed during errors. Fixes bug #789.
1671 kes Extend new GUI api code to tree commands.
1672 kes Ensure that tree and dot commands check console ACLs.
1673 kes Permit marking directory with trailing slash.
1674 kes Allow 20 console connections (instead of only 10).
1676 kes Add smartctl call to bacula-sd.conf as an example of getting
1679 kes Modify jobq.c to let simultaneous restore jobs run. This may
1680 cause them to fail if they cannot get a drive.
1681 kes Add Client Connect Wait to Storage daemon to permit users to
1682 modify the time the SD waits for a FD connection.
1684 kes Correct virtual changer check which was backwards. This caused
1685 volumes to be unloaded into slots already occupied.
1687 kes Apply Command ACL filter to JobId list in restore command.
1688 kes Correct typeo in var.c patch.
1690 kes Don't let Bacula prune File or Job records for the current Job.
1691 kes Fix variable substitution pad + inc bug reported (with patch)
1694 kes Correct SQLite log table index as reported by Luca Berra.
1696 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1698 kes Begin implementing new comm signals for API.
1699 kes Fix a few places in lib/message.c where the open fd may
1701 kes Continue implementing lib/bsock.c (real class). Make jcr,
1702 who, host, and port private. There are new methods to access
1703 them for non-class use. This required touching a number of files.
1705 kes Add LANG=C to autoconf/randpass so it works with languages other
1706 than English. Fixes bug #788.
1708 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1710 You will not be able to generate Include/Exclude list any more.
1711 It will be fixed soon.
1712 If you want to use this, you can apply
1713 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1715 kes Restore of sockets created false error messages because Bacula
1716 no longer restores sockets, but the code was still trying to
1717 set the attributes on a non-existent file. Reported by a user.
1718 ebl finish RecyclePool feature
1719 Media will takes Pool.RecyclePool
1720 when moving from Scratch to a Pool or when user will do
1721 update volume=xxx frompool
1722 To use it, add RecyclePool = aPool to your Pool resource
1725 RecyclePool = Scratch
1729 kes Expand new BSOCK class adding signal() and new BNET signals.
1730 kes Begin enhancing the dot commands adding a new API function
1731 that returns more information and will make it easier
1732 to interface to the Director from a program.
1734 kes Make DEVICE fd private. Its new name is m_fd, and can be
1735 obtained with dev->fd() outside the class. This is the
1736 first of many DEVICE members to be made private.
1737 kes Implement Michael Renner's idea on having a virtual disk
1738 changer. I made some minor modifications (e.g. I did not
1739 implement the Virtual Changer directive, but simply set
1740 the Changer Command to an empty string.
1742 kes Implement a BSOCK send() method that writes the whole record
1743 in a single write() request rather than in two.
1744 ebl add update volume=xxx recyclepool=yyyy
1745 volume takes recyclepool from pool when using update volume=xxx from pool
1747 kes Fix encryption deblocking bug, which caused some restored files
1748 to be truncated. This fixes bug #763.
1749 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1750 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1752 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1753 ebl Use btime_t instead of uint64_t in media patch.
1755 kes Optimize the use of the database a bit in the Status dir command.
1756 Only open it when needed, ensure that if any previous database
1757 was opened, it is closed.
1759 kes Correct VolCatBytes bug from media patch.
1760 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1761 in the case of orphaned records.
1762 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1763 and File records in 300K chunks to be more efficient. This
1764 idea came from Juan Luis Frances (if I remember right).
1765 kes Apply Eric's scratch patch that moves a purged Volume to
1766 the RecyclePool. Question: how is RecyclePool set? what
1767 happens to the ScratchPool?
1768 kes Apply Eric's media patch that collects read/write media
1769 times as well as byte counts. This patch requires a
1770 simultaneous upgrade of the DIR and SD. Note, there
1771 should be some way to turn off timing. I'm not sure
1772 times are in Bacula units.
1773 kes Apply Eric's batch-insert patch.
1775 kes Update projects list.
1777 kes Implement Include/Exclude file lists in FD as dlists using
1778 the new dlistString class. This permits efficiently having
1779 large include/exclude lists and completes project Item 25.
1780 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1781 console is authorized to cancel the job. This fixes bug
1783 kes Modify SD so that the VolCatJobs medium record is updated
1784 at the beginning of a Job rather than the end. This
1785 fixes bug #775 where exceeding MaxVolJobs caused jobs
1787 kes Added a mutex around getting and setting Volume information
1788 so that multiple simultaneous jobs will single thread.
1790 Switch to using Subversion
1791 kes Remove src/pygtk-console/ from configure
1793 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1794 plus the entrypoints.
1795 kes Apply patch supplied that corrects debug print
1796 in canceling jobs for max run time. Supplied as
1797 part of bug #621, which was previously fixed.
1799 kes Test on job_canceled() and sd_msg_thread_done inside
1800 loop starting the message thread to avoid a race condition.
1802 kes Remove rl_catch_signal from console.c as it conflicted
1803 with the header definition. Fixes bug #765.
1804 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1806 kes Clarify some stored/acquire messages to indicate if the
1807 problem is with read or append.
1809 kes Fix memory leak with storage ids in cats/sql_get.c
1810 kes Terminate watchdog earlier to avoid reference to released
1811 memory -- reported by Jason Austin.
1812 kes Move closing the database from jobq.c to the director daemon
1813 termination routine. This fixes memory leaks for shadow jobs
1814 (i.e. migration jobs).
1815 kes Free up the unique jobid chain items in migrate.c. This fixes
1816 a memory leak problem.
1817 kes Convert some ugly looking for statements to use foreach_alist
1818 in findlib/find.c. This will facilitate converting the structures
1819 to use dlist (for large include/exclude lists).
1820 kes Fix a bug in the btree.c and btree.h routines, then rename them
1821 rblist and add them to be built in src/lib. Include some new
1822 methods written by Rudolf Cejka that make the code more readable
1823 (hides some of the ugly casting).
1824 kes Add set_next() and set_prev() methods which make the code much more
1825 readable. Also add a new dlistString class that facilitates storing
1826 strings in dlists. To be used in the large include/exclude lists.
1827 kes Make some trivial modifications to lib/tree.h that use rblist
1828 rather than dlist for storing the tree links. This was suggested
1829 by Rudolf Cejka. The result of this is that the restore tree now
1830 uses red-black binary trees rather than simple linked lists. This
1831 should give rather dramatic speed improvements for directories
1832 contining large numbers of directories/files (more than 10000).
1834 kes Fix maxruntime bug #621.
1836 ebl Implement the include JobID in spool file name project.
1837 kes Reorder projects file in order determined by Jan 2007 vote.
1838 kes Implement item #12 on project list -- quick release of FD by
1840 kes Fix open of SQLite3 db where user does not have write permission
1841 so that DIR does not crash. Fixes bug #761.
1843 kes Add back missing @ in Win32 Makefile.
1844 kes Change 'Device not configured to autolabel' from INFO
1846 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1847 which should restart an indefinite # of times.
1848 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1849 other DIR specifications.
1851 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1852 Fix path quoting in SQLite scripts.
1853 Fix problems with SHGetFolderPath.
1855 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1857 kes Fix Job restart on error bug that promotes an Inc to a Full
1858 backup. This should fix bug #755.
1859 kes Add qt-console and first cut of code.
1863 kes Fix Bacula->Documentation link on Win32 to point to index.html
1864 instead of bacula.html. Fixed bug #750.
1865 kes Return JobId in db_get_job_record() when JobId==0. This should
1867 kes Do not release source pointers when restarting a failed job.
1869 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1870 This *should* fix bug #747.
1871 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1874 kes Modify USTORE constructor to set an empty store_source string,
1875 and don't copy the store_source string in a cancel. Hopefully
1876 this will fix Arno's seg fault, bug #744.
1877 kes Add back code to disable conio in configure. Fixes bug #743.
1878 kes Correct the Options scanner in the FD to correctly handle
1879 SHA1 option, which was eating the next option. Reported by
1881 kes Add code to indicate when the SD is spooling, spool wait, and
1882 despooling as requested by Alan Brown.
1884 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob