1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
31 separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
36 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
37 job when reading from one autochanger and writing to another.
38 kes Minor tweaks (copyright dates convert to use method instead of bnet).
40 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
41 drives when no tape is mounted.
43 kes Add additional info to some SD messages.
44 kes Add fix supplied by Martin Simmons for turning off EOL character
45 in new console multi-command code.
47 kes Fix a Verify InitCatalog problem where in certain cases
48 a garbage filename may be entered in the verification database. This
51 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
52 sent in by Riyas Yoosuf.
54 kes Fix seg fault in Dir during estimate command with no level value
55 given. This fixes bug #1140.
57 kes Add message to migration job when the target job is already migrated.
58 This closes bug #1129.
61 kes Raise some restore debug levels.
62 kes Replace off_t by boffset_t where ever I found it.
64 kes Define a machine dependent ioctl request type for use with
67 kes When a migration job actually runs, re-check the Job record
68 and skip if the job is already migrated. This should
69 significantly reduce the problems with bug #1129.
71 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
72 turn off glibc checks that prevent getting good dumps.
73 kes Implement console 'wait mount' command. Doesn't yet work.
74 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
75 kes Break the do_swapping into do_unload, do_swapping, and
76 do_load. It is much more logical that way.
77 kes Implement a set_dcr_from_vol subroutine in acquire.c for
78 reading volumes. This allows the dcr to be refreshed after being
79 zapped when the wrong volume is mounted.
80 This should fix bug #1126 -- During multiple tape restore, bacula
81 does not ask for physical tape change, but rereads same tape
83 kes Apply patch submitted for bug #1107 with a small modification.
84 This fixes a bug where bcopy copied too many records.
85 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
87 kes Make the default bat restore Pool be Any. This fixes bug #1118.
89 kes Remove debug statement that crashes the SD at the end of
90 a tape during restore. Fixes bug #1125.
92 kes Implement Win32 bat changes made to Branch-2.4
94 kes Tweak separator command in console to start disabled and
95 allow defining no separator character. Also make code a
96 bit more fault tolerant.
97 kes Make btraceback write the traceback to the working directory
98 before attempting to mail it.
99 kes Add a RFC to Projects.
101 kes Attempt to implement a kludge to make Qt work with bat
103 kes Setup rstorage correctly. Virtual backups are working.
105 kes Move setting JobLevel and JobType into a method, which should
106 allow completing Virtual Backups.
107 kes Fix verify jobs to work again.
109 kes Virtual Backup tweaks -- it is close to working.
111 kes Ensure that SD tried to mount a volume not in an autochanger
112 at least once before asking for operator intervention.
113 kes Make SD aware of Virtual Backup jobs.
114 kes Add VirtualFull for bat.
115 kes Changes to get read storage correct for Virtual Backup.
117 kes Remove old code from label.c
118 kes Split display_display_info() out of write_bsr_file()
119 kes do_vbackup_init() working -- i.e. bootstrap file built.
120 kes Change Bacula trademark owner from John Walker to Kern Sibbald
121 kes First non-working cut of vbackup
122 kes Correct FD heartbeat code to use volatile variable accessed by
124 kes Zero thread id with memset if on Win32 in case it is a struct.
125 kes If cannot create JobMedia record, continue to try to write eof
126 and clean up in block.c
128 kes Add code to interface OpenSSL to new Win32 pthreads code which
129 used a structure for thread_t.
131 ebl tweak bat for win32 compilation
133 ebl Remove tokyo cabinet from the source
134 ebl Update configure/autoconf to support berkeley DB
135 ebl Add a sort to db_get_file_list() to improve bsr construction time.
137 kes Add a mtx-changer.conf file that is not overwritten during
138 an upgrade. It fully configures the mtx-changer script.
139 kes Clear in-use bit on vol when unused while swapping.
141 kes Remove sleep at end of ./bacula
142 kes Clear hash packet for hardlinked files correctly. This corrects
143 a long standing bug where hardlinked files selected individually
144 would occasionally not be restored.
146 kes Apply Eric's patch to ensure that autoprune does not return
147 a Volume not in the autochanger unless requested to do so.
148 kes Correct bat restore display of multiple drives. This fixes
150 kes Do find_a_volume() each time an unload is done. This
151 fixes the failure of maxvol2-test.
153 kes Add some SD debug code.
154 kes Do find_a_volume() each time an unload is done.
155 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
156 and adds --with-db-port to ./configure.
157 kes Use Qmsg() in job.c watchdog callback.
159 kes Release main control rwlock if ABORTing.
160 kes Make watchdog connect timeout queue messages rather than sending
161 directly to avoid lock conflicts with the real thread.
162 kes Add const char in dbd.c to avoid compiler warnings.
163 kes Fix python compiler string warning. Note, IMO the GNU C++
164 compiler guys have made a *very* bad change to their compiler.
165 They now force all strings to be 'const' unless you explicitly
166 cast them, which is extremely ugly and ruins nice code as well
167 as creates a lot of useless work.
169 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
170 mt. This fixes bug #1116.
171 kes Add const in python files to reduce compiler warnings.
172 This may have to be backed out because of later compiler
174 kes Fix failure of 2drive-concurrent-test. Always read label;
175 clear_unload() only after drive is defined in acquire_for_read().
177 kes Generally clean up the manual tape loading code. The main
178 conceptual change is that when a volume is marked to be unloaded,
179 its volume name is retained, and it is only marked as unloaded
180 when either the autoloader says it is unloaded or another tape
181 is read on that drive.
183 kes Add debug code and refactor subroutine in stored/mount.c
184 kes Fix format problem in bscan output reported in bug #1105.
185 ebl Fix get_next_volume_for_append logic with autochanger
186 - use pruned volumes if found
187 - don't reset the inchanger flag after getting a recycled volume
189 Fix recycle_oldest_purged_volume to take InChanger flag in account
191 ebl Add mmap/unmmap implementation for tokyodbm under win32
193 kes Make first step toward eliminating globals from config
194 scanning. Also should be a workaround for FORTIFY_SOURCE
195 GNU C bug -- fixes bug #1042.
197 kes Apply duplicate job tests to restarted jobs.
198 kes Copy more data when restarting a job so that run
199 overrides are kept. This should fix bug #1094.
201 kes More word alignment cleanup.
202 kes Fix bug where SD did not ask operator if the device could not
203 be opened. Reported by Eric.
205 kes Add dbuser to DIR conf file (replaces user).
206 kes Add --with-db-password to ./configure
207 kes Fix regress to handle db_password.
208 ebl Add new "status storage slots" that list autochanger
210 ebl Update vtape driver to compile only under Linux.
211 ebl Fix a bug when restoring with a wrong mediatype.
213 kes Eliminate ints from conf files and structures to avoid
214 word alignment problems
216 kes Fix bug reported by Scott Barninger where the bacula script
217 refers to scripts in the wrong directory. Needed to meet the
218 requirements of recent FHS location changes.
219 ebl Disable vtape for FreeBSD.
221 ebl Modify disk-changer to check if slot contains something before
224 ebl Fix vtape on win32 and debian.
225 ebl Fix autoselect patch (cause segfault).
227 ebl Fix autoselect option broken for a while. Fix #1089. Need some
228 work with StorageId to be able to use a particular drive in a
231 ebl Rename vtape to vtape.
232 ebl Update vtape driver.
234 ebl Modify vtape driver to avoid sparse file.
235 kes Add make clean of qt-source directory during ./configure
236 kes Store last block number written to tape in DEVICE and
237 use it for testing for correct last block on EOT.
239 Release Version 2.4.0:
243 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
244 This fixes bug #1095.
246 kes Add create_postgresql_database.sql to Win32 installer. Should
247 fix problem reported by Juilio Monteiro.
248 kes Get correct slot when auto unloading a device. This fixes bug
251 kes Fix multiple media restore.
252 kes Make DEVICE Slot private and access it via a method.
253 Allows better control over when it is set and cleared.
254 kes Fix possible seg fault if SQL error.
256 kes Add Martin's fixes to argument scanning for the estimate
257 command. This fixes bug #1093.
258 kes Add debug code to SD.
259 kes Fix renaming a Volume, which used the wrong Volume name.
261 kes If operator has rewind tape, print warning, release tape and
262 try once more. If tape is positioned somewhere, something went
263 wrong, so mark the tape in error and try once more. Previously
264 this error was fatal, now it produces an error message.
265 kes Ensure correct volume name displayed during restore
266 kes Ensure that Volume is mounted for restore.
268 kes Fix a few more Coverity reported problems.
270 kes Apply Allan Black's status dir job count patch.
271 ebl Add information about IMPORT/EXPORT slots in mtx-script.
272 kes Enhance a couple of SD debug messages.
273 kes Tweak unload flag setting and ensure it is set during swap.
275 ebl Fix #1091 about bad output in estimate command.
277 kes Modify autochanger locking to attempt to avoid race
279 kes Make sure device not busy before doing label command.
280 kes Display open() errors except when polling. Previously too
281 many were suppressed. This should fix bug #1070.
282 kes Fix Win32 reparse points. Bacula will not recurse into any
283 reparse point directory, including mount points, unless the
284 directory is explicitly mentioned at the top level (same as
285 with Unix). A file that is linked to another file will be
286 backed up -- much as Unix does for hardlinked files.
287 This fixes bug #1041.
289 kes Remove double quotes from ChangeLog and ReleaseNotes
290 kes Remove StorageId test when pruning and recycling (Eric's changes).
291 kes Remove old form of locking when getting volumes -- causes deadlock.
292 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
293 the name unique and to eliminate compile time error.
294 kes Add accurate.o to Win32 FD Makefile
296 kes Fix cats dll build on Win32 after db_update_job_end_record
297 calling sequence change.
298 ebl Switch to tokyo dbm instead of htable in accurate code
299 ebl Include tokyo dbm to bacula source tree
301 kes Fix buffer overruns detected by Coverity.
303 kes Tweak joblog display.
305 kes Implement --without-qwt
306 kes Fix layout of restore tree dialog
307 kes Add configure bat QWT libraries, so that bat can be built
308 with or without the QWT libaries.
310 ebl Add dummy tape driver for regression tests.
311 kes Make sure we unload the right slot when swapping.
313 kes Add debug times, reduce size of two-pool-changer test
315 ebl Tweak autoconf scripts for vtape
317 kes Improve SD reserve debug code.
318 kes Testing an improvement to free up volumes no longer in use.
320 kes Rework SD acquire for read to handle autochanger Volume
322 kes Implement regression that explicitly tests swapping a Volume
323 from one drive to another.
324 kes Enhance disk-changer to detect most error conditions.
325 kes Fix SD code so that it properly swaps a Volume between drives.
326 This fixes bug #1083.
328 kes Apply libdbi patch from Joao Freitas for regress and for
329 Bacula trunk. Regress now works with libdbi. Nice.
330 kes Apply .nobackup patch from bug #1077 submitted by
332 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
333 name into jobs cloned via the run directive.
335 kes Prevent a Volume that is being swapped from being freed from
336 the volume list. This will most likely fix, at least partially,
338 kes Fix strippath so that it does not get a buffer overrun and crash FD.
339 This fixes bug #1078.
340 kes Remove 50 millisec wait in SD that broke debugger.
341 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
342 that a job may run, counted from when the job was scheduled.
343 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
344 a job may block waiting for a resource, counted from when the job starts
345 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
346 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
347 that implements multiple commands per line in the console when using
348 readline. Modify the default to use a semicolon as the command separator.
350 ebl Fix SQL query in migration code.
351 ebl Make accurate mode with hash disk pass regression tests
353 ebl Implement first cut of accurate backup with hash disk.
355 kes Force unload of volume when wrong volume mounted in SD.
357 kes Fix bat seg fault at termination.
358 kes Add Bacula generated version to bat about box.
361 kes Experiment with allowing multiple read jobs.
362 kes Move final volume swapping code to DCR method and
363 call it from acquire_for_read().
364 kes When wrong volume is mounted during read, unload_autochanger.
366 kes Integrate the libdbi changes from Joao Henrique Freitas
368 kes Stop searching for Volumes in SD askdir if DIR returns the
369 same volume name twice in a row.
370 kes Close bat console windows first to eliminate error message
373 kes Tweak the swap Volume from one drive to another code so that
374 it now seems to work.
375 kes Resolve several problems with recycling that broke the new
376 code (these problems are in 2.2.9 as well).
377 kes Remove the volume lock when calling the sysop code.
378 kes Don't mark a reserved volume with no writers as unused otherwise
381 kes Rework class structures for VOLRES, DCR, and DEVICE to make
382 the method names a bit more logical, and for more logically
383 handling the responsibilities.
385 kes Remove redundant code in terminating the scheduler that just
386 causes a seg fault in many cases.
387 kes Cleanup releasing a volume and make it a DCR method.
388 kes Improve algorithm for detecting pre-reserved volume and
391 kes Tweak volume swapping code so it works.
392 kes Correct name overloading in mount.c
393 kes Replace released flag in VOLRES with reserved and add access
394 methods for the VOLRES class.
395 kes Prevent volume from being released while being swapped.
396 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
398 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
400 kes Refactor parts of stored/mount.c
402 ebl Add sanity checks for VolWriteTime and VolReadTime
403 ebl Take care of bad clock changes while computing VolWriteTime
404 and VolReadTime. This should fix or limit #1066
405 kes Correct error string numbers in dird/catreq.c
406 kes Restructure reserving, acquiring, and mounting volumes. Calls to
407 autochanger are deferred for mount.c -- simplifes the code.
409 kes Do not prune any running job. It just fails the job.
410 kes Lock the volumes when changing dev->reserved_device and marking
411 the volume unused otherwise the device can get reserved by
412 another job before the volume is released, thus blocking it.
414 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
415 kes Fix bug #1063, reuse of freed ptr in list nextvol.
416 kes Release regex compile buffer in filed/job.c
417 kes Add proper type of const char in sql_create.c
418 kes Turn off debug in daemon termination routines
419 kes Move free_volume_list() before devices are freed in stored.c
420 kes Fix reference to uninitalized stack variables in bregex.c.
421 This should correct bug #1067.
423 kes Fix possible seg fault in SD when freeing a volume entry.
425 kes Implement unload_dev() before swap device.
426 ebl Add statistics prunning with option and menu
427 kes Separate unload_dev() from unload_other_device() in autochanger.c
429 kes Apply patch from bug #1069 that corrects spurious error messages
430 when ACLs enabled on SGI but no ACL exists.
431 ebl Fix small segfault in bacula-sd when debug level is 500
432 kes Modify run_program() and run_program_full_output() to use
433 call by reference for the results string. This corrects a long
434 standing problem where the address of the string may be changed
435 in the subroutine but not in the calling program.
437 kes Re-enable code to remember last volume mounted on a non-tape
439 kes Add patch supplied in bug #1068 that fixes a SD crash when using
440 a Virtual autochanger.
441 kes Generate correct JobMedia records during spooling/despooling when
442 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
443 <tih@hamartun.priv.no> for excellent analysis and testing.
445 kes Tweak hash algorithm for htable using Martin Simmons idea
446 for doing a circular shift.
447 kes Remember what volume is in VTLs (previously turned off for
449 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
450 pointed out some problems in creating JobMedia records during
451 spooling with concurrent jobs. Fix the problem by updating the
452 start file position before despooling and generate a jobmedia
453 record at the end of despooling.
455 kes Fix handling of JobMedia records during spooling and when a
456 Volume is changed without actually writing data to the Volume.
458 kes Rework certain SD locking based on gdb tracebacks of deadlocks
459 sent by Eric. This code now uses only the volume_lock() rather
460 than the reservations lock when at EOM and acquiring a new
462 kes Ensure only one exit point in several subroutines.
464 kes Implement bsock code to permit locking. Use the new code in Verify
465 in the FD to prevent the heartbeat thread from disrupting the Verify
466 data sent to the Dir.
467 kes Modify SD locking to eliminate locking the reservations system from
468 outside the system. Use the volume lock when getting media data
469 and reserving a new volume at end of media.
470 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
471 when SD starts are not locked into place.
473 kes Fix error compiling runscript code on 64 bit machines.
474 kes Tweak Win32 mount point code.
475 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
476 cleared giving bad file estimate).
477 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
480 kes Keep Schedule run lists in order as suggested by
483 kes Implement autostart scripts for Debian.
484 ebl Implement upgrade catalog scripts.
486 ebl Apply jobstat patch for long term statistics. Have to implement
487 purge stats command and upgrade scripts.
488 kes Fix mtx-changer.in for broken Debian mt program.
490 kes Fix large number of JobMedia records reported by Eric Bollengier.
492 kes Apply doc fix from bug #1062.
493 kes Resolve crash and improper restore wx-console Win32 restore
494 GUI. Fixes bug #1065.
495 kes Update Win32 wxWidgets to latest version.
496 kes Attempt to do correct handling of Win32 mount points. Should
498 kes Fix Win32 FD backup/restore memory leak due to improper termination
499 of BackupRead/Write. This fixes bug# 1038.
501 ebl Reduce memory usage for accurate backup, working only with ctime
502 and mtime. (not all Lstat field)
503 About 40MB for my Linux system (400.000 files)
505 kes Add dcr->reserved_volume flag that allows us to release a volume
506 even if it is not vol->released. This allows maxvol2 to work when
507 Volumes expire and we are already writing to the device (i.e. a
508 volume is pulled out from under us by another job terminating after
509 we reserve the drive).
511 ebl Permit multiple command/console per runscript definition.
512 RunScript { command = /bin/true ; command = /bin/false ... }
513 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
514 (restart an application) just after the VSS snapshot on windows.
515 kes Don't zap dcr values during release_volume() as they might
516 have the next Volume to be mounted.
517 kes Fix AIX prototype.
519 kes Second cut of drive switching during backup.
522 kes Update Win32 version of wxWidgets to most recent version.
523 kes Tweak Copy job details.
524 kes Rework dir_find_next_appendable_volume to make a bit more effort
525 to find a suitable volume before giving up.
527 kes Make ask_sysop_to_create... to return if waken from wait.
528 This helps get out of blocked conditions.
529 kes Experimental implementation of switch_device in reservations.
530 kes Implement FD version to allow easier protocol changes.
531 kes Add Plugin Options string -- not yet passed to FD.
532 kes Implement PluginOptions ACL.
534 kes Attempt to correct problems with restores with autochangers and
535 use counts going negative
536 kes Rework SD status command and implement API for bat. Implements
537 header, runing waitreservation, devices, volumes, spooling,
538 and terminated status keywords.
539 .status storage=xxx <keyword>
540 kes Clarify TLS error message by adding double quotes around name.
541 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
542 kes Pass jcr to tls routines so debug messages can be handled better.
543 kes Rework jobq resource allocation code, and possibly fix a bug
544 that caused reference counts to get out of sync.
546 kes Rename fd/dir plugin to use Bacula standard underscore.
547 kes Plugin work -- bring dir up to fd level.
548 kes Start implementation of VTL code
549 kes Fix Win32 build after adding new cats subroutine.
551 kes First cut at Duplicate Job implementation.
553 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
554 kes Start PluginOptions string, and refactor a bit of ua_run.c
555 ebl Apply Allan patch that permit to reset recyclepool.
557 kes Test patch -- possible fix or improvement for bug #1053
558 kes Refactor FD and SD status commands to permit new API code in
559 SD, and to fix Win32 build.
560 kes Win32 build is now working.
562 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
563 some ideas in patch from Scott Bailey.
564 kes Begin implementation of duplicate Job control.
565 kes Fix some of Win32 build after recent additions.
566 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
567 which causes the FD to detect whether or not the OS has the
568 honor no dump bit (*BSD systems), and if so, to skip backing up
569 any file with this bit set. The feature is enabled by setting
570 'honor no dump flag = yes' in the Options section of a FileSet.
572 kes Correct po warning message with datarootdir
573 kes Implement more code in dird.c to put configuration parsing in
574 a class rather than use globals.
575 kes Restructure SD status command for implementation of bat API
578 kes Suppress incorrect 'Will not descend from x into y' messages.
579 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
580 daemon globals used by parser.
581 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
583 kes Fix free of plugin_list when none exists.
585 ebl Apply accurate project patch.
587 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
588 on non-mempool object)
589 kes First cut of converting FD .status to work with bat API.
591 .status client=XXX header
592 .status client=XXX running
593 .status client=XXX terminated
594 kes Implement first cut of Copy Job.
595 kes Implement Catalog in Pool resource. It overrides catalog specified
596 in the Client resource.
598 kes Apply patch (with some difficulties) from Joao Henrique Freitas
599 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
601 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
602 ftruncate() actually works. In the case of some (cheap) NAS devices,
603 it does not, and so recycling NAS Volumes does not work. The code
604 simply unlink()s the file, then recreates it. This fixes bug #1011.
606 kes First incomplete cut of big malloc blocks for htable.
607 kes Tweak plugin code.
609 kes Plugin debug code + tweak a couple bat dialog layouts
611 kes Fix creating first JobMedia record during Migration to include
612 proper index. This caused slow restores of migrated jobs.
613 kes Temp fix to plugin name file_index.
614 kes Bacula backed up and restored a MySQL database.
616 kes Implement plugin restore.
617 kes Implement parsing of db_driver to give db_type index.
619 kes First cut of plugin restore code.
620 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
621 and do not strip paths on symbolic links.
622 kes Set catalog backup database and user name from values specified on
623 the ./configure line.
624 ebl Fix #1031 about wrong pool source information in job report.
627 kes Remove a redundant jcr argument to find_files, match_files, and
629 kes Implement '.status dir header|scheduled|running|terminated' that
630 prints the requested status section. With the exception of the
631 header, the other reports have fields separated by tabs (\t).
633 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
634 a resource embedded run command to find a since time if no explicit
635 since time was supplied on the command line.
636 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
637 that updates the state file at job termination time in addition to
638 when the daemon terminates.
640 kes First version where a plugin did a backup.
641 bpipe-fd.so created a backup file, wrote a test
642 string to it, and Bacua could restore this fabricated file.
644 kes Implement DB Driver = string for the DBI driver.
645 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
646 kes First cut of code for loading Win32 plugin dlls. Implement
647 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
648 and implement a dlfcn.h file based on opengroup's definitions of
651 kes First cut plugin directives.
653 kes Apply patch from bug #1049 to prevent stripping the path on a
655 kes Attempt to fix bug #1047 where stripping a path corrupts the
656 heap. Waiting for feedback.
657 kes Correct the Mount message not to suggest labeling a new tape
658 when doing a restore. Submitted by email by John Stoffel.
659 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
660 FD by using casting. Reported in bug #1042.
662 kes A bit of crypto cleanup. More later.
664 Release Version 2.2.8
666 kes Apply patch from Martin to correct bug #1040, bscan sets existing
668 kes Fixed important spelling error in doc -- bug #1045.
670 ebl Fix bextract to be able to extract non-portable Win32 data to
672 kes Move initialization of read/write res lock earlier in the code.
673 This fixes the crash with a null conf file. This fixes bug
675 kes Redefine CURES in lib/parse_conf to be URES and move it all
676 into lib/parse_conf.c -- this responds to bug #1042, but does
677 not fix it. The fix is not to compile with FORTIFY_SOURCE.
678 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
679 the trunk SVN. I don't think this was reported as a bug.
681 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
683 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
685 kes Add DataDespooling and DataCommitting status (committing is
686 the last despooling).
687 kes Finish implementation of new reservations code noted below.
689 kes Fix bsnprintf for float point numbers. I broke recently when
690 parameterizing some variables. This fixes bug #1036.
691 kes Undo recent reservations changes ... will apply them later
692 when they work better.
694 ebl Fixes #1034 which cause mysql to hang the connection after 8h
695 ebl Change default statistics target of filename.name and path.path
696 fields for PostgreSQL. This speeds lookup by indexes. Thanks
698 kes A few more tweaks to new reservation code. Make sure to clear
699 vol released flag when retaking volume. When reading label and
700 label is bad mark volume unused. When recycling, mark volume
701 unused so it can be renamed.
703 kes Fix reserve_volume() so it doesn't release a volume in use
704 (i.e. a volume entry not marked released). This should be
705 the last part needed to fix bug #1018.
707 kes Move Heartbeat documentation from Job to Director resource.
708 This fixes bug #1033.
710 kes Fix existing switch drive SD code to call autochanger to release
711 any old volume. This must be done to keep the autochanger from
712 releasing subsequently newly reserved volumes in doing a close().
713 This should fix bug #1018.
714 kes Fail if attempting to get console input in batch mode. This
715 should help fail RunScript console commands that are incomplete.
716 kes First cut implementing switch_drive() in SD (not actually called).
718 kes Implement first cut running console commands in a RunScript.
720 ebl Fixes bug #1028 where 'Selection Type' option was not usable
722 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
725 Release Version 2.2.7
727 kes Add new free_tls() entry point so that Win32 builds.
728 kes Fix compile warning in src/lib/util.c
729 kes Fix entry point for edit_job_codes() so that Win32 builds.
730 kes Fix seg fault Frank Sweetser reports in regression testing
731 on his systems. The problem was that the original author of
732 bsnprintf.c did not take into account the side effects of
733 using ++x in the argument to a #define.
734 kes Make SD protocol backward compatible with version 2.2.x.
736 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
737 because Bacula no longer restores sockets.
738 ebl Always use ignorecase fileset option on win32 FD.
740 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
741 that implements double quoting include names in conf files,
742 and also allows piping input by having the first character
743 be a vertical bar (|).
744 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
745 that implement %f in RunScripts to pass the FileSet name.
746 kes Skip leading | when lex input comes from a pipe as suggested
747 by Michael Stapelberg <michael@stapelberg.de>.
749 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
750 Nerijus Baliunas <nerijus@users.sourceforge.net>
752 kes Implement Plugin Directory and plugin events.
754 kes Implement a security enhancement: TLS authentication but no
755 encryption. Enabled by setting 'TLS Authentication = yes'.
756 Note when this is on, TLS encryption is turned OFF!
758 kes This patch corrects a problem where the maximum concurrent storage
759 jobs counter gets out of sync during restore jobs causing jobs to
760 'wait on max Storage jobs'. This patch fixes bug #1009.
762 kes This patch fixes bcopy so that it produces correct Volumes.
764 kes This patch eliminates spurious output to the console during a VerifyVolume
765 job that contains encrypted data. It fixes bug #1024.
767 kes This patch prevents the 'status dir' command from trying to use a scratch
768 volume and possibly moving it from one pool to another. This patch fixes
771 kes Add new include to postgresql.c suggested by Marc Cousins so
772 that it compiles correctly with pgre version 8.3.
774 kes Fix --archivedir addition to configure. Replace it with
775 --with-archivedir in configure.in This fixes the regression
777 kes This patch fixes bug #1012 where the job is canceled because
778 of Max Run Time exceeded when the job has not yet started.
780 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
781 one 'part' to write. Instead of each part being stored on disk,
782 written to DVD, then deleted from disk, all parts are written to disk,
783 and only the last is written and deleted from disk.
784 kes This patch fixes the status command to include the formating string for
785 JS_AttrInsterting. It fixes bug #1021.
786 kes This patch should fix the Mac OS X build problem on the latest
787 Darwin, where sys/types.h was not included correctly (apparently
788 due to a change in the Mac headers). The solution was to explicitly
789 ensure that it is defined for the ./configure.
790 This patch also has a rebuild of configure that includes the Debian
791 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
792 kes This patch should ensure that queued messages to the console are
793 displayed as soon as possible. It should fix bug 1007, but has been
794 reported not to work.
796 kes This patch fixes the infinite loop when trying to increase the
797 maximum number of volumes in a Pool during the add command.
798 This patch fixes bug #1008.
800 Release Version 2.2.6
802 db Remove extra data on estimate command in joblist for bat.
804 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
805 really change anything, but is the beginning of doing it *right*.
806 To do it completely right the LastWritten date must be passed to
807 the SD, but it is not yet done.
808 kes Minor tweaks to some bat restore SQL.
809 kes This patch fixes bug #1003 where putting the message output from
810 a Verify job into the catalog results in a recursive loop. The problem
811 seems to show up only with postgresql (to be verified).
812 kes Correct %x to %p in postgresql debug statement.
814 kes Fix bug #942 where lots of emails where generated when the heartbeat
815 interval was low and Bacula wanted a different tape from the one in
818 ebl Add new SD despooling attributes and Dir inserting attributes
819 job status codes in the catalog (Status table).
821 ebl Use qmake-qt4 instead of qmake when available (debian system).
823 kes Add a security warning to src/cats/make_catalog_backup.in indicating
824 that passing the password via the command line (arg 3) is insecure.
825 This responds to bug #990 (it doesn't fix it).
827 kes Set default debug_level to zero. This corrects bugs #991 and #993.
828 kes Fix a crash in bat when it cannot connect to the Director for example
829 if the Director is not running.
830 kes Remove redundant INDEX (JobId) from File table in the trunk.
832 kes Make explicit exception to GPL in LICENSE to permit linking
833 the Win32 FD with Microsoft VSS code.
834 kes Apply the Solaris package patch from
835 Masopust, Christian <christian.masopust@siemens.com>
836 kes Apply the patch to optionally add a timestamp in the debug output
837 submitted by Mariusz Czulada <manieq@wp.eu>.
839 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
840 backend (sql_strerror). Fixes bug #989
842 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
843 It applied with no problems.
844 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
846 kes Redirect stderror to stdin on mt status command in mtx-changer.in
847 since the status is returned on stderr on Solaris.
848 kes Activate Close button on tray-monitor window. This fixes
850 kes Check for NULL item in parse_conf.c before calling it. In the
851 case of Device, there is no item and this caused a seg fault when
852 Device appears in the conf file.
853 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
854 avoids pulling in config.h multiple times in some new code.
856 kes Fix spurious warning message printed when creating a volume with
857 a LabelFormat. This fixes bug #976.
859 Release Version 2.2.5
861 kes Add JobId in place of Job name in all the Jmsg() output.
862 kes Correct the APP_DESC for the Win32 storage service (remove an e).
864 kes Make maxvol-test and new more strict maxvol2-test work.
865 kes Print JobId in all Jmsg() job output.
867 kes Add new SD despooling attributes and Dir inserting attributes
868 job status codes. This fixes bug 961.
869 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
871 kes Fix doc issue. This fixes bug #963.
872 kes Fix listing performance problems in bat. Pointed out by
874 kes Remove old debug code.
875 kes Fix bat code that tests for Win32. This should fix bug #968
876 kes Query 5 list wrong Vol after migration. This fixes bug #960
878 ebl Fix #969 where user can't change Replace option in restore menu.
880 kes Save jcr in thread specific data (tsd) for each thread.
881 kes Make Dmsg() print JobId as -%u.
882 kes Make Jmsg, Emsg, and others automatically pickup the jobid
883 for the thread if it exists.
884 kes Remove old reservation debug jid code.
885 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
886 ebl Add an option that permit to specify spool size in job
887 definition. (Applying patches/testing/spoolsize_per_job.patch).
888 You must upgrade SD and DIR at the same time.
889 dvl Add new configuration item --archivedir
890 dvl Adjust regression tests to use tmp not /tmp. This will allow
891 multiple concurrent runs of the regression tests.
893 kes Fix race condition that drops final block written to volume.
894 This happens in rare cases with multiple simultaneous jobs
895 when the Volume fills. This fixes bug #964. May be related
896 to bug #935 and possibly #903.
897 kes Eliminate more strerror() and replace with bstrerror().
898 kes Remove BSD getopt and replace with unrestricted IBM version.
899 kes Fix Win32 build for changed calling sequences.
900 kes More tweaks to the mount volume routines to get everything
901 right. Changed variable name from find to have_vol, which is
902 much easier to understand.
903 kes Enhance btimer debug code.
905 kes Fix FD->SD authorization failure, which was due to spurious
906 wakeups from a pthread_cond_timedwait(). Simply check the
907 predicate before continuing. This fixes bug #953.
908 kes Add const char where needed (more to do). Remove temp debug code.
910 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
911 kes Don't overwrite error message in check_tables_version.
913 kes Unlock batch insert tables with same calls used elsewhere.
914 kes Allow starting 59 jobs a second.
915 kes Make SD session key more random.
916 kes Add retry for SQLite opening db if it fails. Probably helps
918 kes Suppress extra error messages during batch insert failure.
920 kes Add jcr to timer packets so if killed message can be sent to job.
921 kes Add JobId to all Dmsg() output.
922 kes Put some FD auth code on dbglvl rather than fixed.
923 kes Return insert attributes error message in db msg buffer to avoid
924 false error messages. Helps fix bug #966.
925 kes Separate batch init error messages. Probably helps fix bug #966.
926 kes Make SD code that contructs attribute insert check string lengths
928 kes If Dir gets an error during inserting attributes, cancel SD.
929 This reduces unnecessary error messages.
931 kes Correct search boolean for getting Volume info
932 ebl Cleanup batch insert code. Probably fixes bug #965.
933 kes Back out one small change to the reservation system (reserving a volume).
934 kes Rework how a Volume is mounted. It is now much more intelligent and
935 will always attempt to use any mounted volume if possible and reduces
936 calls to the Director asking about volumes.
938 kes Turn off some code when batch insert not enabled.
939 kes Edit FD name in connect error messages.
940 kes Rework the reservation system to take into account that the Director
941 might give us a Volume that is different from the current one being
942 used, and to ensure that we don't exceed Maximum Volume Jobs.
943 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
944 fatal error with multiple jobs running'
945 kes Add more debug code in reservation system.
946 kes Implement maxvol-test to check bug #947.
948 kes Add code to handle tray monitor separated from Win32 FD.
949 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
951 kes Add missed return in fixing verify bug -- trunk only.
952 ebl Fix a command parser issue causing a director segfault.
953 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
955 kes Increase the max block size to 4MB fixes bug #957.
956 kes ERABT if user sets min block size > max block size. Fixes bug #956.
957 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
958 is not properly mounted (recognized) during a poll.
959 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
960 Job that has differences reports Verify OK.
961 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
963 ebl Add an option to operate on all pools with update vol parameters.
964 This complete the project 20. Patch from Nigel Stepp.
965 ebl Add history support to bconsole when using readline.
966 Using Ctrl-D to exit doesn't update .bconsole_history
967 kes Modify new volume algorithm to use max MediaId for generating next
968 volume number rather than the count of Volumes. This should essentially
969 eliminate the failure rate if some volumes were deleted. Bug #921.
970 kes Begin implemention of Optimize Job Scheduling.
971 kes Implement restore callback that Dirk and I agreed on for bat
972 restore. This fixes bug #928. Restore of backup of zero files fails.
973 kes Fix SQL Catalog logging which broke with new db_escape_string
976 Release Version 2.2.4
978 kes Fix bacula_cats.def for new db_escape_string().
979 kes Increase size of name string when FD making connection to SD.
980 May fix bug #953. FD->SD connection failure.
982 kes Add code to help Dan debug 2drive-incremental-2disk test.
983 kes Add code to try to fix bug #908.
984 kes Add waits to multiple exit detection code to try to force pid
985 file to always be deleted.
986 kes Restore good dev.tar.gz to rescue set appropriate binary property.
988 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
989 trying to switch drives by checking for blocking before unblocking.
991 kes Cancel storage daemon in all cases where FD reports error. This
992 should fix virtually all cases of bug #920.
993 kes Fix db_escape_string() for MySQL which did not compile.
995 kes Fix error message that was clobbered when Dir tells SD it does not
996 have write permission on Volume. This should fix a minor point
997 in bug #942, but not the main problem.
998 kes Add code to cancel job in SD if FD connection fails. This should
1000 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1001 dvl Pass jcr and db into db_escape_string() to enable better escaping
1003 kes Fix migration code to get correct Volume name with multiple volumes
1004 by skipping |. Fixes bug #936.
1005 kes Implement patch supplied by Landon to fix bug #944 where using
1006 TLS with bconsole uses 99+% of the CPU.
1007 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1009 kes Move patches into patches directory.
1011 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1014 ebl Using 'm' in bconsole will show messages like before,
1015 and not memory usage.
1016 kes Fix bug #935, and probably also bug #903 where files were not
1017 restored. MediaId was not properly set in JobMedia record after
1020 kes Suppress chown and chmod error messages if the FD is not running
1023 kes Apply Martin Simmons' patch that should turn off the new API usage
1024 when batch insert is turned off allowing building on older
1026 kes Add ./configure search in qwt-qt4 for qwt package
1028 kes Bacula is now free of 3rd party GPL copyrighted code!
1029 kes Remove idcache.c
1030 kes Add guid_to_name.c/h which replace idcache.
1031 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1033 ebl Detect if new PosgreSQL batch insert API is present.
1034 kes Correct incorrect mempool call causing Director crash. Occurs on
1035 systems without va_copy().
1036 sb Update spec files for 2.2.1 release
1038 kes Fix memory pool call in ua_output.c. bug #934.
1039 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1040 Add test program to fnmatch.c
1042 kes Integrate patch to README.vc8 from
1043 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1044 edit it to get it into Unix patch format.
1045 kes Implement mkpath.c to replace old FSF makepath.c
1047 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1049 Release Version 2.2.1
1051 kes Update POTFILES.in
1052 kes Cleanup a few underquoted AC_DEFUNs in configure
1053 kes Apply patch from Martin Simmons that adds a test for va_copy to
1056 kes Fix bug #921 by increasing the number of tries to create a new volume
1058 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1059 can be called multiple times. Implement a version for machines
1060 without va_copy() that gets a big buffer.
1062 kes Integrate more portable zone offset code into bsmtp.c
1063 Submitted by Attila Fülöp.
1065 kes Fix bad SD->FD return status reported by
1066 (James Harper) <james.harper@bendigoit.com.au>
1067 ebl Fix a bug in read_close_session which return random status
1068 thanks to James Harper
1070 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1071 and directory names during restore of single file/directories.
1072 kes Add sanity checks to .sql command when string is empty. Hopefully
1073 that will resolve Dirks Director crash.
1075 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1076 in the bsmtp chat subroutine when debug is >= 10.
1078 kes Fix Director crash when running bat SQL queries.
1079 kes Add David's notes on Item 8: Copy pools.
1081 kes Rework projects file to be current and ready for a vote.
1082 kes Enhance lex scanner error message.
1084 kes Tweak LICENSE file to mention BSD code.
1085 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1086 if specified on the ./configure.
1087 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1088 This class is intended to allow us to open a second bsock to the
1089 Director while in the restore subdialog.
1091 kes Fix configure to create bat Makefile before creating dependencies.
1092 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1093 kes Add a tooltip to the tray monitor.
1094 dvl Set the Director's PID file before dropping privs. This fixes
1097 kes Update AUTHORs file
1098 kes Increase the default max concurrent jobs to 20 in FD and SD to
1099 correspond with the default .conf files.
1100 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1101 some different, of the same file created by RN when porting the
1103 kes Rearrange some of the Win32 directories and the placement of the files
1105 kes Set DEVELOPER flag in version.h
1107 ========================================================================
1108 Release Version 2.2.0
1110 kes Apply a second doc patch from Marc.
1111 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1112 improves the tips section that discusses how to setup multiple
1115 kes Update bat README file.
1116 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1117 corrects a typo in the Recycle status check in db_find_next_volume().
1118 This will probably fix a number of annoying problems with multiple
1120 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1121 bnet calls -- no functionality change.
1123 kes Modify the Verify output to specify if files are missing on
1124 the Volume(s) or disk. Fixes confusion in bug #916.
1125 kes When more than one Volume is read in a migration job, the last
1126 Volume bytes reported are from the last read volume rather than
1127 the last written volume. Fixed. This fixes bug #910.
1128 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1129 It previously printed New Recyle flag is: no. This fixes bug
1132 kes Correct seg fault when switching tape drives during restore.
1133 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1134 be used until after 2.2.0 release.
1136 kes Remove fnmatch() in SD that permitted wild card specifications.
1137 This fixes bug #914.
1139 kes Fix %g in filename returned by SQL for browse tree reported by
1141 kes Fix configure so that it puts config.out in the cwd rather than
1143 kes Attempt to fix the locking problem reported by Eric in bug #906.
1144 kes Make berrno class to leave errno unchanged after constructor call.
1145 kes Make bnet_server use the heap rather than the stack to allocate
1146 its socket fd pointers to avoid a crash at termination. Problem
1147 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1149 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1150 and putting it in depkgs-qt along with Qt4.3.
1152 kes Rework code in acquire.c that switches drives for reading when
1153 the Media Type does not match. This should fix bug #906
1155 ebl Fix a director segfault during job setup #907
1156 kes Correct seg fault in postgresql when first operation returns no
1157 rows. Fixes Dirks File browser problem seg fault with bat.
1159 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1160 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1163 kes Implement PopUp YES/NO dialog for bat.
1165 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1167 kes Correct RunScript to terminate job in FD on failure.
1168 kes Change abort_on_error and AbortJobOnError to fail_on_error
1169 and FailJobOnError in RunScripts.
1170 kes Minor tweaks of code formating in RunScripts, principally to
1171 avoid depassing 80 columns.
1173 kes Eliminate one #ifdef Win32 in bsmtp
1174 kes Implement grow tool to grow a file for testing very large databases.
1175 kes Add big-vol-test to test Bacula seeking with > 5GB.
1178 kes Modify find_next_volume() to return all values in Media record.
1179 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1183 kes Update Release notes
1185 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1186 Warning, in previous beta version, all media get from scratch keep their
1189 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1190 This should fix bug #842. Made a note to look at removing the temp
1191 files at the end of the install.
1192 kes Add ability to mount and unmount a file device providing it is
1193 marked as being removable and has the appropriate mount and unmount
1194 commands defined in the Device resource. This fixes bug #830.
1195 kes When applying a storage override, release all previous storage
1196 definitions rather than just prepending the new storage.
1197 This should prevent a good deal of confusion.
1199 kes Implement ./configure search for qwt libraries.
1201 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1202 Win32 FD. This should fix bug #893.
1203 kes Remove an unnecessary beep in Win32 init code.
1204 kes Update copyright dates in Win32 executable about boxes.
1205 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1206 code with a BSD getopt.c and getopt.h.
1207 kes Remove sched.h from the Win32 compat directory -- not used.
1208 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1209 need to shut it down, do it through the services panel or the command
1211 kes Remove some inappropriate Bacula FSFE copyrights.
1212 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1213 kes Fix regress config non-portable test as pointed out by
1214 Florian Heigl <florian.heigl@gmail.com>
1215 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1216 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1218 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1219 Reported by Frank Sweetser.
1223 kes Fix client-only build.
1224 kes Integrate client-only fixes for bsys (initgroups) and conio from
1225 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1226 kes Make arguments to get_scratch_volume() in same order as other
1228 kes Rework the prune_volumes() subroutine so that after purging and
1229 no volume found in desired pool, it will check for a scratch
1230 volume. This prevents recycling the whole scratch pool.
1231 kes Add code to status storage to print boffset_t (largefile support).
1233 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1234 kes You now need a --with-qwt=<dir> to be able to build bat.
1235 kes Update src/win32/cats/bacula_cats.def to include the new
1236 db_get_query_dbids() call on Win32.
1238 kes Correct a problem when selecting a scratch volume and moving
1239 it to another pool that lost some columns.
1240 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1241 kes Enhance Autochanger error messages to include Volume and device name.
1242 kes Rework prune_volumes() code to take account of InChanger flag,
1243 and to handle recycling volumes going to the Scratch pool and
1244 current pool because the RecyclePool directive.
1245 kes Implement a better and more efficient db_get_query_dbids() to
1246 handle creating and passing back a list of DBIds.
1250 kes Start work on new more efficient DBId subroutine. First use
1251 will be for recycling volume to Scratch inchanger.
1252 kes Increase number of JobIds in pruning from 1000 to 10000.
1253 This to be replaced by above routine.
1254 kes Begin implementation of building Qt4 on Win32.
1255 kes Correct typo in fix I added for bad TLS shutdown.
1256 kes Pull 2.0.3 patches into patches directory.
1257 kes Update Release notes. Include qt-console in line count.
1258 kes Update Projects file.
1260 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1261 bug in migration code where a job that spanned two volumes
1264 kes Implement new BST_DESPOOLING blocked state. Change from locking
1265 during despooling in SD to blocking. This means that other threads
1266 can work with the device structure, in particular the reservations
1267 system while despooling.
1269 kes Fix return in reservation message queue that missed clearing
1270 the jcr lock (implemented 26Jun07 below).
1271 kes Rename a number of dev methods to make locking function names
1273 kes Document locking in lock.c. Move lock structures to new file
1276 kes Move reservations message lock to lock jcr only this
1278 kes Move main SD locking code into lock.c (new file).
1279 kes Update Win32 build to include lock.c
1283 kes Dirk committed the qwt library code for drawing graphs in bat.
1284 kes Tweak install of qwt so that it is integrated with ./configure.
1286 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1287 out by Eric (my typo).
1288 ebl Fix configure.in to get batch mode enable
1289 kes Return correct string from authenticate.cpp in bat when connecting
1291 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1292 spurious line drops when using TLS.
1293 kes Do not file reparse points when restoring a file that already
1296 kes Implement Windows reparse points -- similar to directories, but
1297 we do not descend into it. This is a first cut. They seem to
1298 be backed up, but restore is not yet tested.
1299 kes Remove restore_blocking in tls code when shutting a socket to leave
1300 it in blocking mode. Hopefully this will fix the encryption bug
1301 reported by Frank Sweetser.
1302 kes When opening a file for backup, tell the OS that we are going to
1303 read it sequentially -- optimization.
1304 kes Change variable names in authenticate_director() to not conflict
1305 with member names in bat. Caused great confusion with compiler,
1308 kes Queue openssl error messages in case of comm problem.
1309 kes Do shutdown() call if socket terminated.
1310 kes Remove some duplicated code in tls.c
1311 kes Move more of the bsock member variables into private and access
1313 kes Add Frank Sweetser's tls-test to the regression suite.
1315 kes Add Swedish sv.po file
1317 kes Don't print clock skew message in FD if less than 3 seconds diff.
1318 kes Add a bit of VSS info to status client.
1319 kes Implement a first cut of Vista VSS, using Win2003 code.
1321 Release: 2.1.20 beta
1323 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1324 loaded tape but uses first drive).
1325 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1326 This was indeed a Win32 issue.
1328 kes Simplify search of autochanger for in-use Volume.
1329 kes Fix exit condition of check for in-use volume. kes Remove
1330 inappropriate my_postgresql_free_result() in db_close()
1332 kes Fix bad return in FD when encryption signature not found.
1333 Probably caused a crash.
1334 kes Inhibit missing encryption signature error messages for
1335 file types where no signature computed.
1336 kes Correct inverted check on autochanger in reservation system.
1337 kes Tweak debug code in autochanger reservation.
1339 kes Add some additional locking in the cats directory in subroutines
1340 that modify packet variables called from batch insert.
1341 kes Rework how dcrs are allocated. new_dcr() can now be called
1342 with an existing pointer, and it will simply clean it up.
1343 This allows the reservation system to test various different
1344 devices, and will permit easy device changes.
1345 kes A bunch of changes all over to handle new new_dcr() calling
1347 kes Work more on the Volume management in the SD. Remember Volumes
1348 for tape drives and for autochangers (even virtual disk changers).
1349 kes When looking at the Volume list to reserve a drive, handle
1350 autochanger names correctly by interating through the changer
1351 devices. Also call the Director to see if a Volume is suitable
1352 for the current job.
1353 kes Fix some bugs in bscan. Make sure all media records are written.
1354 Make sure that valid JobMedia records are written for disk files.
1355 Previously they were completely wrong.
1356 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1357 that the URLs don't change and so that the developers will all
1358 work off the same copy. Rebuild from scrach.
1359 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1361 Release: 2.1.18 beta
1363 kes Fix seg fault in FD from incorrect digest size.
1364 kes Fix argument to non-OpenSSL crypto.c subroutine.
1366 Release: 2.1.16 beta
1368 kes Remove a few malloc()s from the encryption code.
1369 kes Use the class calls to bsock in filed/backup.c and restore.c in
1370 place of the old bnet_xxx code.
1371 kes Implement code that does an on the fly calculation of the
1372 signing digest during restore of encrypted files. It makes
1373 a best guess at the algorithm, and if it is not correct, will
1374 then revert to the old code which reads the file after it is
1376 kes Implement at least one missing crypto stream in stream_to_ascii()
1377 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1378 #877 where a reload with bad syntax causes Dir to exit.
1380 Cut: 2.1.14 beta (not released)
1382 kes Do not free a volume on a tape drive until another volume is
1383 mounted and read, or the autochanger unloads the volume.
1384 This should help the SD re-use volumes that are already mounted,
1385 and should fix bug #886.
1386 kes Apply patch from user brettedgar that allows gnome2-console include
1387 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1388 kes Apply patch from Lucien Weller that fixes day of week calculation
1389 because of DST flag problem. Fixes bug #887.
1391 kes Move find_next_appendable_volume() to after acquiring a valid device
1392 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1394 kes Unable to reproduce bug 872. However added additional testing for
1396 kes Bug #874 resolved by documenting SQLite limitations.
1397 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1398 kes Bug #881 resolved by removing typo in mtx-changer script.
1399 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1400 approval. Added a link to the wiki on the web page, and implemented
1401 a backup from http://paramount.ind.wpi.edu
1403 kes Fix update allfrompool to pass pool name.
1405 kes Convert to pure GPL v2 license.
1406 kes Fix sscanf problems reported by Peter Buschman that caused
1407 a bus error on Solaris.
1408 kes Rework (simplify) the select prompt in bat.
1409 kes Move get_jobid_from_tid() into lib and create a
1411 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1412 should definitely fix the problem of lost error messages in the
1414 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1415 kes Eliminate tcpd.h from the project. Enclose the #include from the
1416 library with extern C ...
1417 kes Add print of signal name when a signal is trapped.
1419 Release: 2.1.12 beta
1421 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1423 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1424 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1425 makes SQLit3 run 30 times faster, though a bit less safe.
1426 kes Implement --with-batch-insert in configure and detection of thread
1427 safe libraries. It is on by default, but turned off if no thread
1428 safe library (e.g. SQLite 2) is available.
1430 kes Fix Bacula PostgreSQL buffer overruns.
1431 kes Do better checking for NULL results returned from PostgreSQL;
1432 implement retry for failed queries; clear results buffer after
1433 failed query. Hopefully this will correct the PostgreSQL failures.
1435 kes Implement algorithm to handle only one appendable volume with
1436 Prefer Mounted Volumes = no.
1437 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1438 returned from a query.
1439 kes Make volume lock recursive.
1440 kes Implement an additional volume reservation algorithm that
1441 starts by considering all reserved volumes then uses the
1442 old brute force algorithm of searching the resources to
1443 find a suitable device.
1444 kes Add new reservations debug code and refine the old code.
1445 kes Update the win32/dll/bacula.defs file.
1447 kes Tweak reservations algorithm to permit a few more cases, i.e.
1448 volume reserved, but on different drive, ...
1449 kes Enhance SD status to include Pool and Media Type for drive in a
1450 more readable format (a bit longer).
1451 kes Fix PostgreSQL double free.
1453 kes Minor refactoring of restore decryption code.
1454 kes Add code to smartall.c to detect double free of a buffer.
1456 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1457 so that bsmtp will create a correct email address (mailbox only).
1458 kes Modify 'memory' command so that the buffers are listed as 'In use'
1459 to avoid confusion with Orphaned buffers.
1460 kes I reworked the OpenSSL include/lib flags to be handled in
1461 the standard Bacula way, which should fix bug #863 concerning
1462 non-standard OpenSSL libraries.
1464 kes Implement Help Browser window for bat.
1465 kes Fix reload bug that reset StorageId to zero.
1467 kes Fix TLS #ifdefing when TLS turned off.
1468 kes Ensure that when labelling a tape with Slot=0 that InChanger
1470 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1472 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1473 add DISTINCT (required by PostgreSQL).
1474 kes Implement BSOCK authenticate_director() method. Eventually will
1475 authenicate all daemons.
1476 kes Move several more functions into the BSOCK class.
1478 kes Add code to tell the OS that we no longer need a cached
1479 file that we were reading. In findlib/bfile.c. Also,
1480 only cache files that we are reading. Thanks to
1481 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1482 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1483 kes Implement script to automatically generate cats and dll .def
1484 files for Win32 dll.
1485 kes Update README.mingw32 to include new .def file generation.
1486 kes Correct typo in UTF-8 error message as reported by:
1487 jhernandez <julianhernandez@gmail.com>
1488 kes Add additional sm_check() code on debug level 1.
1489 kes Set default debug level to 1.
1490 kes Trap SIGABRT in attempt to get traceback.
1492 kes Reduce bat connect timeout from 30 to 15 seconds.
1493 kes More restructuring and implementing BSOCK class in place of
1495 kes Remove a few unnecessary malloc() tests in crypto code.
1496 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1497 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1498 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1500 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1502 kes Fix Verify InitCatalog. The attributes were not pointing to the
1503 correct saved location.
1504 kes Implement message callback so that GUI is sure to get all
1505 daemon messages. Currently displayed in a dialog in bat.
1506 kes Ignore SIGUSR2 (Bacula timer) in bat.
1507 kes Apply regress patch from bug #859 to allow regress to work
1508 with Solaris compiler.
1510 kes Begin adding TLS support to bat.
1511 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1512 clean up lex.c and make it more readable.
1514 kes Move more bnet functions into the BSOCK class.
1515 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1516 kes Complete change of berrno strerror() method to bstrerror()
1518 Release: 2.1.10 beta
1520 kes Cleanup incorrect email addresses in bsmtp.
1521 kes Make bat display initial messages rather than discard them.
1523 kes First cut of adding .mod to the run command.
1524 kes Implement auto display of messages in bat.
1525 kes Enhanced preferences to allow all Bacula output to be
1528 kes Try to make bsmtp date routines more generic.
1529 kes Fixed bug #856 autochanger documentation.
1530 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1531 kes Add new cats entry point so Win32 builds.
1533 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1535 kes Do better checking for the MySQL 64 bit libraries looking for both
1536 .a and .so libraries.
1537 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1538 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1539 kes Require the thread safe version of MySQL during configure. Thanks
1540 to Andre Noll for pointing this out.
1541 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1542 continuing in migration code.
1543 kes Apply implementation of tray-monitor font derived from gnome-console
1544 submitted by Andreas Piesk <a.piesk@gmx.net>
1546 kes Eliminate important memory loss in SQLite
1547 kes Fixed the batch insert MySQL thread specific data that was not
1548 being freed. See cats/mysql.c:db_thread_cleanup().
1549 kes Fix restore before command.
1550 kes Convert old hdr.name to name() in a few places.
1551 kes Implement update jobid command.
1552 kes Return all time_t dates in db_get_job_record()
1553 kes Stop watchdog in SD earlier.
1554 kes Put Pool just after Storage in please mount message.
1555 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1558 kes Update the po files.
1559 kes Fix Verify InitCatalog by making it cache attributes.
1561 kes Change name bacula-bat to bat for man 1 page to correspond to
1563 kes Check for client and store NULL pointers in status command. This
1565 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1566 kes Fix sign extended editing of %p.
1567 kes Clean out a little old #ifdefing in cats/mysql.c
1569 kes If time diff between DIR and FD is more than 600 seconds convert
1570 INFO message to WARNING.
1571 kes Implement heap size display in status for all daemons.
1572 kes Attempt to fix MySQL db open memory loss (not successfull).
1573 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1574 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1575 Query. This looks like a MySQL but but by doing extra releases,
1576 the memory goes away. This should fix bug #847.
1578 kes When backup fails, cancel SD before waiting for sd termination.
1579 kes If SD is waiting for FD to connect during cancel, wake up the
1581 kes Fix fsf code so that errno is correctly reported.
1582 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1584 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1585 so that Bacula doesn't later stumble into a seg fault.
1586 kes Use the term Restore Client in the restore Job report.
1587 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1588 the original job's FileSetId.
1589 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1590 spooling in migration jobs. Not yet tested.
1591 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1592 reading conf file from a pipe. However, do it with open_bpipe()
1593 rather than popen. Not yet tested.
1595 kes Fix an ugly bug where the VolCatBytes were getting updated
1597 kes Implement bconsole memory command that prints current memory
1598 usage, plus smartalloc dump.
1599 kes Clarify some error messages in backup, admin, and migrate.
1600 kes Shrink label dialog to smaller size.
1601 kes Invert Cancel OK buttons on restore to be OK Cancel.
1602 kes More strerror() to bstrerror() conversions.
1604 kes Start implementing bstrerror() in place of strerror().
1605 kes Stripping path -- seems to work.
1607 kes Prevent door and port files from being restored (mostly
1609 kes Free an unreleased buffer in compat code.
1610 kes Change console Job name from *Console* to -Console- to eliminate
1611 Win32 filename problems. Put Win32 path separator when creating
1612 Console file. This fixes bug #846.
1613 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1615 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1617 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1618 to force Win32 error message.
1620 kes First cut strip path. The data should be passed to the FD,
1621 but nothing is done with it yet.
1622 kes Enhance the digest and signature routines in the crypto
1623 library to accept a JCR and to use it to print error messages
1624 so that they will go in the Job report rather than the daemon's
1626 kes Simplify some of the verify signature code.
1627 kes Simplify a few of the alternative returns in the signature
1630 ebl Use only POSIX regex instead of GNU regex in breg.c for
1631 File relocation. It fix broken freebsd compilation.
1632 kes Convert all other Dir files to use new ua class message
1634 kes Tentative fix for missing digest signature in bug 807.
1635 kes Correct handle problem in new win32_ftruncate routine.
1636 kes Convert ua_purge.c and ua_update.c to use new ua class
1637 message routines for bat.
1639 kes Correct incorrect installation of LICENSE in Win32 installer.
1640 kes Display LICENSE at the beginning of the Win32 install.
1641 kes Attempt to correct the need for the png files to be installed
1643 kes Reapply my bat.conf install script in qt-console. I think I
1644 editted bat.pro instead of bat.pro.in and it was lost.
1645 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1646 the /var/lock/subsys for subsysdir. Also corrects typos in the
1649 kes First cut update job.
1650 kes Correct configure to include qmake of src/qt-console directory.
1652 kes Make restore job yes/mod/no print in one command so GUI works.
1653 kes First cut implementing backup and restore client.
1654 kes Correct editing in Verify output that caused a seg fault.
1656 kes Insure that bat.conf is not overwritten during installation.
1657 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1658 while I was implementing migration in March 2006 !
1660 ebl Cleanup file relocation, using char *RegexWhere instead of
1661 char *where + bool where_use_regexp
1662 kes Update some manpages and add bat manpage.
1663 kes Make a first cut at converting bacula.spec.in for bwx-console
1665 kes Apply patch from John Goerzen to add hostname as fourth argument
1666 to make_catalog_backup script.
1667 kes Fix typos I introduced into bsmtp.c
1668 kes Make pm_strxxx() routines handle input of NULL pointer. This
1669 is to protect from NULL pointers returned from SQL databases.
1670 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1671 kes Add more debug to FIFO code -- fix fifo regression test.
1673 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1674 kes Add thread timer to bnet_connect() to break from OS if wait time
1677 kes Update Win32 build to include new files, new symbols, and
1679 kes Implement socket level heartbeat (tcp_keepidle)
1680 ebl Commit File relocation patch
1681 kes Make bat have 'make install' target.
1682 kes Warn during install if old gnome-console binary found.
1683 kes Warn during install if old wx-console binary found.
1684 kes Add -8 option to bsmtp command line to add content type utf-8.
1685 Fixes bug #809. (Character coding problem in bsmtp).
1686 kes If < is found in target (from, to, cc) then do not enclose the
1687 target in < > in bsmtp. Fixes bug #772 (malformed address).
1688 kes When printing certain items in dbcheck, stop after 300000.
1689 Fixes bug #822. (dbcheck loops).
1690 kes Incorrect status in Dir after waiting for mount with poll set.
1693 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1695 kes Print waiting to reserve a device every 5 mins.
1697 kes Don't call close_part in label.c if tape and relabel.
1698 kes Don't free volume if busy in close() -- should help with
1700 ebl Fix #824 RunScript bug (After script could be execute twice)
1701 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1702 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1703 Add a regression script to test RunScript
1705 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1708 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1709 deprecated. No additional bugs will be fixed, and they will be dropped
1710 in a future release (probably 2.4.0).
1711 kes Change name of wx-console to bwx-console to make it more Bacula
1713 kes Change the name of gnome-console to bgnome-console to make it
1716 kes Some time in March, a Feature Request with patch from Jorj Bauer
1717 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1719 The ability for the director to validate a Client (FD) CN against
1720 an arbitrary set of patterns rather than the hostname, with
1721 A new 'TLS Allowed CN' set of directives which are implemented
1722 in the Client resource. Then pattern matching is used in place
1723 of hostname matching against the Certificate's CN. As an example, we
1724 have certificates which (a) use a local CA, and (b) have a CN of the
1726 kes Add new/changed entry points to Win32 build
1727 kes Create unaccepted-projects for projects that are not accepted.
1728 kes Simplify locking in the reservations system.
1729 kes Add more debug code in reservations.
1730 kes Make sure error condition on reserving a volume is handled correctly.
1731 kes Correct handling of volume_in_use.
1732 kes Correct handling of initializing a device.
1733 kes Move handling of broadcasting releasing a device into release_device().
1734 kes Correct attaching dcr to dev so that it is only done if device
1735 is properly initiated.
1737 kes Locking debug level tweaks in SD.
1738 kes Tweak new Volume code.
1740 kes Add exec external-command [wait-seconds] to bconsole. This
1741 executes the external-command. Note! normally external-command
1742 should be enclosed in double quotes.
1743 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1744 it should normally be off in a production system.
1746 kes Implement die command for SD so that we can force it to dump.
1747 kes Implement SD lock debug code.
1748 kes Implement new algorithm for keeping Volume list in SD. It
1749 is now owned by the device.
1751 kes Implement new code for freeing in use volumes that should
1752 resolve if not all, some of the problems of multiple drive
1753 tape conflicts described in bug 801.
1755 kes Fix gui/bacula-web/images files in svn.
1756 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1758 ebl Fix a bug in batch mode (in string escape)
1759 kes Correct migration prune SQL typo that crept in in a
1760 recent 2.1.x change.
1762 kes Move bnet_despool() into class in bsock.c
1763 kes Modify job report to include director name and Build OS.
1764 kes Move drop root privilege and check_catalog() before fork.
1765 kes Add update database scripts (version 9 to 10) to updatedb directory.
1767 ebl Check size and age of each file after its backup to see if
1768 it has changed during backup, if 'checkfilechanges' is set.
1769 The FD will do an extra check (stat(2)) after
1770 each file backup. mtime, ctime and size are compared with
1771 'before backup' information. If time or size mismatch, an
1772 error message will be generated. You must upgrade FD to use it.
1774 kes Make database name and user configurable
1775 --with-db-name=xxx --with-db-user=xxx
1776 kes Add back database type to message.c for debugging.
1778 kes Implement dir_sql() which issues an SQL query.
1779 kes Modify bat medialist to use dir_sql() and do some minor C++
1780 formatting as well as eliminating a number of pointers, simplifing
1783 kes Fix some of the mtx-changer grep commands for tape label readers.
1784 kes Convert a number of bsendmsg into the appropriate send/warning/error
1785 message class calls.
1786 kes Suppress the using database message in the .sql command.
1787 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1789 kes Add context menu for floating a window.
1790 kes Some minor cleanup and name changes in qt-console
1791 kes Add doing mt setblk 0 in Win32 mtx-changer.
1792 kes Apply Martin's bug fix to move definition of ENODATA for
1794 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1795 sqlite2 and sqlite3.
1797 kes More pruning cleanup.
1798 kes Turn on wait_for_drive by default in mtx-changer.
1799 kes Turn on Batch insert code by default as it now passes regression.
1800 kes Add ./configure --enable-bat to enable building of Bat.
1801 No install yet though.
1803 kes Implement a new .sql command for bat.
1804 kes Implement code to turn off pruning in obtaining the next volume.
1805 Pruning is turned off for the status dir command, but turned on
1806 for SD requests and for the list nextvolume command.
1808 kes Correct Qmsg() that was not updated correctly when committing a
1809 previous change (probably the recent TLS patch).
1811 kes Write new subroutine is_volume_purged() that explicitly checks
1812 if the Volume is purged, and if so marks it as such. This should
1813 resolve problems reported about needing to mount twice to recycle
1815 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1816 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1817 amount of duplicated code.
1818 kes Do volume pruning only for the Media Type desired (reduces pruning time
1819 if multiple Media Types are in the same pool).
1820 kes Implement more detailed info in the Job report for the Bacula version
1822 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1824 ebl Add bbatch tool to bench database and insert mode.
1825 Fix sql quote stuff in batch mode
1826 Fix sql stuff for mysql
1828 kes Correct problems with am/pm scheduling. Fixes bug #808.
1829 kes Implement new prunning code that prunes up to 1000 jobs at
1830 the same time. The same technique can be applied to a number
1831 of other prune/purge subroutines.
1832 kes Add an insanity check when starting a new tape job to ensure
1833 that the tape position has not been changed. If so fail the
1835 kes Fix Win32 build for dlls to add the folllowing:
1836 src/lib/bsock.c -- new file with new entry points
1837 src/lib/dlist.c -- new entry points
1838 src/cats/sql_create.c -- new entry point
1839 src/cats/sql_cmds.c -- new DATA item exported
1841 ebl batch mode cleanup bscan-test is ok now.
1842 kes Implement SD code to check length of disk volume before appending.
1844 kes Correct return status on db_batch... routines.
1845 kes Add call to db_write_batch_file_records() to migration code.
1846 ebl Fix AfterJob timing
1847 kes Move the checking of the database in initializion of the Director
1848 to after we drop privileges. This avoids the need for both root
1849 and bacula access to the DB.
1850 kes Correct a misplaced variable definition in src/filed/backup.c
1851 kes Correct how the new batch insert db_create_attributes_record()
1852 uses the arguments. Caused a seg fault in bscan.
1853 kes Implement lock() and unlock() methods in DEVICE class.
1854 Implement block() and set_block(xx) methods in DEVICE class.
1855 kes Modify bnet_connect() so that it uses time() to check for the
1856 wait time expiring (on some OSes, some system calls may not
1857 return immediately).
1858 kes Modify Verify to obtain the previous JobId when it is actually
1859 running rather than at schedule time (as it was in 1.38.x).
1860 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1862 kes When checking pid in pid file, continue running if the pid is
1863 the same as ours. This occurs on IRIX after a system crash.
1866 kes Extend new GUI API.
1867 kes Make the ua structure a class, and implement send_msg(),
1868 error_msg(), warning_msg(), and info_msg().
1870 kes Apply fix from for building wx-console on the Mac from
1872 kes Implement new select mechanism for GUI programs.
1873 kes Reorganize initialization of stackedWidgets in bat.
1875 kes Add updated nagios plugin supplied by Christian Masopust.
1877 kes More bat implementation.
1878 kes File migrate bug with Pool Occupancy using mediaid instead
1879 of jobids. Fixes bug #795.
1880 kes Fix orphaned buffers in filed backup and verify due to
1881 crypto buffers not freed during errors. Fixes bug #789.
1882 kes Extend new GUI api code to tree commands.
1883 kes Ensure that tree and dot commands check console ACLs.
1884 kes Permit marking directory with trailing slash.
1885 kes Allow 20 console connections (instead of only 10).
1887 kes Add smartctl call to bacula-sd.conf as an example of getting
1890 kes Modify jobq.c to let simultaneous restore jobs run. This may
1891 cause them to fail if they cannot get a drive.
1892 kes Add Client Connect Wait to Storage daemon to permit users to
1893 modify the time the SD waits for a FD connection.
1895 kes Correct virtual changer check which was backwards. This caused
1896 volumes to be unloaded into slots already occupied.
1898 kes Apply Command ACL filter to JobId list in restore command.
1899 kes Correct typeo in var.c patch.
1901 kes Don't let Bacula prune File or Job records for the current Job.
1902 kes Fix variable substitution pad + inc bug reported (with patch)
1905 kes Correct SQLite log table index as reported by Luca Berra.
1907 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1909 kes Begin implementing new comm signals for API.
1910 kes Fix a few places in lib/message.c where the open fd may
1912 kes Continue implementing lib/bsock.c (real class). Make jcr,
1913 who, host, and port private. There are new methods to access
1914 them for non-class use. This required touching a number of files.
1916 kes Add LANG=C to autoconf/randpass so it works with languages other
1917 than English. Fixes bug #788.
1919 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1921 You will not be able to generate Include/Exclude list any more.
1922 It will be fixed soon.
1923 If you want to use this, you can apply
1924 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1926 kes Restore of sockets created false error messages because Bacula
1927 no longer restores sockets, but the code was still trying to
1928 set the attributes on a non-existent file. Reported by a user.
1929 ebl finish RecyclePool feature
1930 Media will takes Pool.RecyclePool
1931 when moving from Scratch to a Pool or when user will do
1932 update volume=xxx frompool
1933 To use it, add RecyclePool = aPool to your Pool resource
1936 RecyclePool = Scratch
1940 kes Expand new BSOCK class adding signal() and new BNET signals.
1941 kes Begin enhancing the dot commands adding a new API function
1942 that returns more information and will make it easier
1943 to interface to the Director from a program.
1945 kes Make DEVICE fd private. Its new name is m_fd, and can be
1946 obtained with dev->fd() outside the class. This is the
1947 first of many DEVICE members to be made private.
1948 kes Implement Michael Renner's idea on having a virtual disk
1949 changer. I made some minor modifications (e.g. I did not
1950 implement the Virtual Changer directive, but simply set
1951 the Changer Command to an empty string.
1953 kes Implement a BSOCK send() method that writes the whole record
1954 in a single write() request rather than in two.
1955 ebl add update volume=xxx recyclepool=yyyy
1956 volume takes recyclepool from pool when using update volume=xxx from pool
1958 kes Fix encryption deblocking bug, which caused some restored files
1959 to be truncated. This fixes bug #763.
1960 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1961 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1963 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1964 ebl Use btime_t instead of uint64_t in media patch.
1966 kes Optimize the use of the database a bit in the Status dir command.
1967 Only open it when needed, ensure that if any previous database
1968 was opened, it is closed.
1970 kes Correct VolCatBytes bug from media patch.
1971 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1972 in the case of orphaned records.
1973 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1974 and File records in 300K chunks to be more efficient. This
1975 idea came from Juan Luis Frances (if I remember right).
1976 kes Apply Eric's scratch patch that moves a purged Volume to
1977 the RecyclePool. Question: how is RecyclePool set? what
1978 happens to the ScratchPool?
1979 kes Apply Eric's media patch that collects read/write media
1980 times as well as byte counts. This patch requires a
1981 simultaneous upgrade of the DIR and SD. Note, there
1982 should be some way to turn off timing. I'm not sure
1983 times are in Bacula units.
1984 kes Apply Eric's batch-insert patch.
1986 kes Update projects list.
1988 kes Implement Include/Exclude file lists in FD as dlists using
1989 the new dlistString class. This permits efficiently having
1990 large include/exclude lists and completes project Item 25.
1991 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1992 console is authorized to cancel the job. This fixes bug
1994 kes Modify SD so that the VolCatJobs medium record is updated
1995 at the beginning of a Job rather than the end. This
1996 fixes bug #775 where exceeding MaxVolJobs caused jobs
1998 kes Added a mutex around getting and setting Volume information
1999 so that multiple simultaneous jobs will single thread.
2001 Switch to using Subversion
2002 kes Remove src/pygtk-console/ from configure
2004 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2005 plus the entrypoints.
2006 kes Apply patch supplied that corrects debug print
2007 in canceling jobs for max run time. Supplied as
2008 part of bug #621, which was previously fixed.
2010 kes Test on job_canceled() and sd_msg_thread_done inside
2011 loop starting the message thread to avoid a race condition.
2013 kes Remove rl_catch_signal from console.c as it conflicted
2014 with the header definition. Fixes bug #765.
2015 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2017 kes Clarify some stored/acquire messages to indicate if the
2018 problem is with read or append.
2020 kes Fix memory leak with storage ids in cats/sql_get.c
2021 kes Terminate watchdog earlier to avoid reference to released
2022 memory -- reported by Jason Austin.
2023 kes Move closing the database from jobq.c to the director daemon
2024 termination routine. This fixes memory leaks for shadow jobs
2025 (i.e. migration jobs).
2026 kes Free up the unique jobid chain items in migrate.c. This fixes
2027 a memory leak problem.
2028 kes Convert some ugly looking for statements to use foreach_alist
2029 in findlib/find.c. This will facilitate converting the structures
2030 to use dlist (for large include/exclude lists).
2031 kes Fix a bug in the btree.c and btree.h routines, then rename them
2032 rblist and add them to be built in src/lib. Include some new
2033 methods written by Rudolf Cejka that make the code more readable
2034 (hides some of the ugly casting).
2035 kes Add set_next() and set_prev() methods which make the code much more
2036 readable. Also add a new dlistString class that facilitates storing
2037 strings in dlists. To be used in the large include/exclude lists.
2038 kes Make some trivial modifications to lib/tree.h that use rblist
2039 rather than dlist for storing the tree links. This was suggested
2040 by Rudolf Cejka. The result of this is that the restore tree now
2041 uses red-black binary trees rather than simple linked lists. This
2042 should give rather dramatic speed improvements for directories
2043 contining large numbers of directories/files (more than 10000).
2045 kes Fix maxruntime bug #621.
2047 ebl Implement the include JobID in spool file name project.
2048 kes Reorder projects file in order determined by Jan 2007 vote.
2049 kes Implement item #12 on project list -- quick release of FD by
2051 kes Fix open of SQLite3 db where user does not have write permission
2052 so that DIR does not crash. Fixes bug #761.
2054 kes Add back missing @ in Win32 Makefile.
2055 kes Change 'Device not configured to autolabel' from INFO
2057 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2058 which should restart an indefinite # of times.
2059 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2060 other DIR specifications.
2062 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2063 Fix path quoting in SQLite scripts.
2064 Fix problems with SHGetFolderPath.
2066 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2068 kes Fix Job restart on error bug that promotes an Inc to a Full
2069 backup. This should fix bug #755.
2070 kes Add qt-console and first cut of code.
2074 kes Fix Bacula->Documentation link on Win32 to point to index.html
2075 instead of bacula.html. Fixed bug #750.
2076 kes Return JobId in db_get_job_record() when JobId==0. This should
2078 kes Do not release source pointers when restarting a failed job.
2080 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2081 This *should* fix bug #747.
2082 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2085 kes Modify USTORE constructor to set an empty store_source string,
2086 and don't copy the store_source string in a cancel. Hopefully
2087 this will fix Arno's seg fault, bug #744.
2088 kes Add back code to disable conio in configure. Fixes bug #743.
2089 kes Correct the Options scanner in the FD to correctly handle
2090 SHA1 option, which was eating the next option. Reported by
2092 kes Add code to indicate when the SD is spooling, spool wait, and
2093 despooling as requested by Alan Brown.
2095 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob