1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
31 separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
36 kes Make the default bat restore Pool be Any. This fixes bug #1118.
38 kes Remove debug statement that crashes the SD at the end of
39 a tape during restore. Fixes bug #1125.
41 kes Implement Win32 bat changes made to Branch-2.4
43 kes Tweak separator command in console to start disabled and
44 allow defining no separator character. Also make code a
45 bit more fault tolerant.
46 kes Make btraceback write the traceback to the working directory
47 before attempting to mail it.
48 kes Add a RFC to Projects.
50 kes Attempt to implement a kludge to make Qt work with bat
52 kes Setup rstorage correctly. Virtual backups are working.
54 kes Move setting JobLevel and JobType into a method, which should
55 allow completing Virtual Backups.
56 kes Fix verify jobs to work again.
58 kes Virtual Backup tweaks -- it is close to working.
60 kes Ensure that SD tried to mount a volume not in an autochanger
61 at least once before asking for operator intervention.
62 kes Make SD aware of Virtual Backup jobs.
63 kes Add VirtualFull for bat.
64 kes Changes to get read storage correct for Virtual Backup.
66 kes Remove old code from label.c
67 kes Split display_display_info() out of write_bsr_file()
68 kes do_vbackup_init() working -- i.e. bootstrap file built.
69 kes Change Bacula trademark owner from John Walker to Kern Sibbald
70 kes First non-working cut of vbackup
71 kes Correct FD heartbeat code to use volatile variable accessed by
73 kes Zero thread id with memset if on Win32 in case it is a struct.
74 kes If cannot create JobMedia record, continue to try to write eof
75 and clean up in block.c
77 kes Add code to interface OpenSSL to new Win32 pthreads code which
78 used a structure for thread_t.
80 ebl tweak bat for win32 compilation
82 ebl Remove tokyo cabinet from the source
83 ebl Update configure/autoconf to support berkeley DB
84 ebl Add a sort to db_get_file_list() to improve bsr construction time.
86 kes Add a mtx-changer.conf file that is not overwritten during
87 an upgrade. It fully configures the mtx-changer script.
88 kes Clear in-use bit on vol when unused while swapping.
90 kes Remove sleep at end of ./bacula
91 kes Clear hash packet for hardlinked files correctly. This corrects
92 a long standing bug where hardlinked files selected individually
93 would occasionally not be restored.
95 kes Apply Eric's patch to ensure that autoprune does not return
96 a Volume not in the autochanger unless requested to do so.
97 kes Correct bat restore display of multiple drives. This fixes
99 kes Do find_a_volume() each time an unload is done. This
100 fixes the failure of maxvol2-test.
102 kes Add some SD debug code.
103 kes Do find_a_volume() each time an unload is done.
104 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
105 and adds --with-db-port to ./configure.
106 kes Use Qmsg() in job.c watchdog callback.
108 kes Release main control rwlock if ABORTing.
109 kes Make watchdog connect timeout queue messages rather than sending
110 directly to avoid lock conflicts with the real thread.
111 kes Add const char in dbd.c to avoid compiler warnings.
112 kes Fix python compiler string warning. Note, IMO the GNU C++
113 compiler guys have made a *very* bad change to their compiler.
114 They now force all strings to be 'const' unless you explicitly
115 cast them, which is extremely ugly and ruins nice code as well
116 as creates a lot of useless work.
118 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
119 mt. This fixes bug #1116.
120 kes Add const in python files to reduce compiler warnings.
121 This may have to be backed out because of later compiler
123 kes Fix failure of 2drive-concurrent-test. Always read label;
124 clear_unload() only after drive is defined in acquire_for_read().
126 kes Generally clean up the manual tape loading code. The main
127 conceptual change is that when a volume is marked to be unloaded,
128 its volume name is retained, and it is only marked as unloaded
129 when either the autoloader says it is unloaded or another tape
130 is read on that drive.
132 kes Add debug code and refactor subroutine in stored/mount.c
133 kes Fix format problem in bscan output reported in bug #1105.
134 ebl Fix get_next_volume_for_append logic with autochanger
135 - use pruned volumes if found
136 - don't reset the inchanger flag after getting a recycled volume
138 Fix recycle_oldest_purged_volume to take InChanger flag in account
140 ebl Add mmap/unmmap implementation for tokyodbm under win32
142 kes Make first step toward eliminating globals from config
143 scanning. Also should be a workaround for FORTIFY_SOURCE
144 GNU C bug -- fixes bug #1042.
146 kes Apply duplicate job tests to restarted jobs.
147 kes Copy more data when restarting a job so that run
148 overrides are kept. This should fix bug #1094.
150 kes More word alignment cleanup.
151 kes Fix bug where SD did not ask operator if the device could not
152 be opened. Reported by Eric.
154 kes Add dbuser to DIR conf file (replaces user).
155 kes Add --with-db-password to ./configure
156 kes Fix regress to handle db_password.
157 ebl Add new "status storage slots" that list autochanger
159 ebl Update vtape driver to compile only under Linux.
160 ebl Fix a bug when restoring with a wrong mediatype.
162 kes Eliminate ints from conf files and structures to avoid
163 word alignment problems
165 kes Fix bug reported by Scott Barninger where the bacula script
166 refers to scripts in the wrong directory. Needed to meet the
167 requirements of recent FHS location changes.
168 ebl Disable vtape for FreeBSD.
170 ebl Modify disk-changer to check if slot contains something before
173 ebl Fix vtape on win32 and debian.
174 ebl Fix autoselect patch (cause segfault).
176 ebl Fix autoselect option broken for a while. Fix #1089. Need some
177 work with StorageId to be able to use a particular drive in a
180 ebl Rename vtape to vtape.
181 ebl Update vtape driver.
183 ebl Modify vtape driver to avoid sparse file.
184 kes Add make clean of qt-source directory during ./configure
185 kes Store last block number written to tape in DEVICE and
186 use it for testing for correct last block on EOT.
188 Release Version 2.4.0:
192 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
193 This fixes bug #1095.
195 kes Add create_postgresql_database.sql to Win32 installer. Should
196 fix problem reported by Juilio Monteiro.
197 kes Get correct slot when auto unloading a device. This fixes bug
200 kes Fix multiple media restore.
201 kes Make DEVICE Slot private and access it via a method.
202 Allows better control over when it is set and cleared.
203 kes Fix possible seg fault if SQL error.
205 kes Add Martin's fixes to argument scanning for the estimate
206 command. This fixes bug #1093.
207 kes Add debug code to SD.
208 kes Fix renaming a Volume, which used the wrong Volume name.
210 kes If operator has rewind tape, print warning, release tape and
211 try once more. If tape is positioned somewhere, something went
212 wrong, so mark the tape in error and try once more. Previously
213 this error was fatal, now it produces an error message.
214 kes Ensure correct volume name displayed during restore
215 kes Ensure that Volume is mounted for restore.
217 kes Fix a few more Coverity reported problems.
219 kes Apply Allan Black's status dir job count patch.
220 ebl Add information about IMPORT/EXPORT slots in mtx-script.
221 kes Enhance a couple of SD debug messages.
222 kes Tweak unload flag setting and ensure it is set during swap.
224 ebl Fix #1091 about bad output in estimate command.
226 kes Modify autochanger locking to attempt to avoid race
228 kes Make sure device not busy before doing label command.
229 kes Display open() errors except when polling. Previously too
230 many were suppressed. This should fix bug #1070.
231 kes Fix Win32 reparse points. Bacula will not recurse into any
232 reparse point directory, including mount points, unless the
233 directory is explicitly mentioned at the top level (same as
234 with Unix). A file that is linked to another file will be
235 backed up -- much as Unix does for hardlinked files.
236 This fixes bug #1041.
238 kes Remove double quotes from ChangeLog and ReleaseNotes
239 kes Remove StorageId test when pruning and recycling (Eric's changes).
240 kes Remove old form of locking when getting volumes -- causes deadlock.
241 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
242 the name unique and to eliminate compile time error.
243 kes Add accurate.o to Win32 FD Makefile
245 kes Fix cats dll build on Win32 after db_update_job_end_record
246 calling sequence change.
247 ebl Switch to tokyo dbm instead of htable in accurate code
248 ebl Include tokyo dbm to bacula source tree
250 kes Fix buffer overruns detected by Coverity.
252 kes Tweak joblog display.
254 kes Implement --without-qwt
255 kes Fix layout of restore tree dialog
256 kes Add configure bat QWT libraries, so that bat can be built
257 with or without the QWT libaries.
259 ebl Add dummy tape driver for regression tests.
260 kes Make sure we unload the right slot when swapping.
262 kes Add debug times, reduce size of two-pool-changer test
264 ebl Tweak autoconf scripts for vtape
266 kes Improve SD reserve debug code.
267 kes Testing an improvement to free up volumes no longer in use.
269 kes Rework SD acquire for read to handle autochanger Volume
271 kes Implement regression that explicitly tests swapping a Volume
272 from one drive to another.
273 kes Enhance disk-changer to detect most error conditions.
274 kes Fix SD code so that it properly swaps a Volume between drives.
275 This fixes bug #1083.
277 kes Apply libdbi patch from Joao Freitas for regress and for
278 Bacula trunk. Regress now works with libdbi. Nice.
279 kes Apply .nobackup patch from bug #1077 submitted by
281 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
282 name into jobs cloned via the run directive.
284 kes Prevent a Volume that is being swapped from being freed from
285 the volume list. This will most likely fix, at least partially,
287 kes Fix strippath so that it does not get a buffer overrun and crash FD.
288 This fixes bug #1078.
289 kes Remove 50 millisec wait in SD that broke debugger.
290 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
291 that a job may run, counted from when the job was scheduled.
292 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
293 a job may block waiting for a resource, counted from when the job starts
294 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
295 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
296 that implements multiple commands per line in the console when using
297 readline. Modify the default to use a semicolon as the command separator.
299 ebl Fix SQL query in migration code.
300 ebl Make accurate mode with hash disk pass regression tests
302 ebl Implement first cut of accurate backup with hash disk.
304 kes Force unload of volume when wrong volume mounted in SD.
306 kes Fix bat seg fault at termination.
307 kes Add Bacula generated version to bat about box.
310 kes Experiment with allowing multiple read jobs.
311 kes Move final volume swapping code to DCR method and
312 call it from acquire_for_read().
313 kes When wrong volume is mounted during read, unload_autochanger.
315 kes Integrate the libdbi changes from Joao Henrique Freitas
317 kes Stop searching for Volumes in SD askdir if DIR returns the
318 same volume name twice in a row.
319 kes Close bat console windows first to eliminate error message
322 kes Tweak the swap Volume from one drive to another code so that
323 it now seems to work.
324 kes Resolve several problems with recycling that broke the new
325 code (these problems are in 2.2.9 as well).
326 kes Remove the volume lock when calling the sysop code.
327 kes Don't mark a reserved volume with no writers as unused otherwise
330 kes Rework class structures for VOLRES, DCR, and DEVICE to make
331 the method names a bit more logical, and for more logically
332 handling the responsibilities.
334 kes Remove redundant code in terminating the scheduler that just
335 causes a seg fault in many cases.
336 kes Cleanup releasing a volume and make it a DCR method.
337 kes Improve algorithm for detecting pre-reserved volume and
340 kes Tweak volume swapping code so it works.
341 kes Correct name overloading in mount.c
342 kes Replace released flag in VOLRES with reserved and add access
343 methods for the VOLRES class.
344 kes Prevent volume from being released while being swapped.
345 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
347 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
349 kes Refactor parts of stored/mount.c
351 ebl Add sanity checks for VolWriteTime and VolReadTime
352 ebl Take care of bad clock changes while computing VolWriteTime
353 and VolReadTime. This should fix or limit #1066
354 kes Correct error string numbers in dird/catreq.c
355 kes Restructure reserving, acquiring, and mounting volumes. Calls to
356 autochanger are deferred for mount.c -- simplifes the code.
358 kes Do not prune any running job. It just fails the job.
359 kes Lock the volumes when changing dev->reserved_device and marking
360 the volume unused otherwise the device can get reserved by
361 another job before the volume is released, thus blocking it.
363 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
364 kes Fix bug #1063, reuse of freed ptr in list nextvol.
365 kes Release regex compile buffer in filed/job.c
366 kes Add proper type of const char in sql_create.c
367 kes Turn off debug in daemon termination routines
368 kes Move free_volume_list() before devices are freed in stored.c
369 kes Fix reference to uninitalized stack variables in bregex.c.
370 This should correct bug #1067.
372 kes Fix possible seg fault in SD when freeing a volume entry.
374 kes Implement unload_dev() before swap device.
375 ebl Add statistics prunning with option and menu
376 kes Separate unload_dev() from unload_other_device() in autochanger.c
378 kes Apply patch from bug #1069 that corrects spurious error messages
379 when ACLs enabled on SGI but no ACL exists.
380 ebl Fix small segfault in bacula-sd when debug level is 500
381 kes Modify run_program() and run_program_full_output() to use
382 call by reference for the results string. This corrects a long
383 standing problem where the address of the string may be changed
384 in the subroutine but not in the calling program.
386 kes Re-enable code to remember last volume mounted on a non-tape
388 kes Add patch supplied in bug #1068 that fixes a SD crash when using
389 a Virtual autochanger.
390 kes Generate correct JobMedia records during spooling/despooling when
391 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
392 <tih@hamartun.priv.no> for excellent analysis and testing.
394 kes Tweak hash algorithm for htable using Martin Simmons idea
395 for doing a circular shift.
396 kes Remember what volume is in VTLs (previously turned off for
398 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
399 pointed out some problems in creating JobMedia records during
400 spooling with concurrent jobs. Fix the problem by updating the
401 start file position before despooling and generate a jobmedia
402 record at the end of despooling.
404 kes Fix handling of JobMedia records during spooling and when a
405 Volume is changed without actually writing data to the Volume.
407 kes Rework certain SD locking based on gdb tracebacks of deadlocks
408 sent by Eric. This code now uses only the volume_lock() rather
409 than the reservations lock when at EOM and acquiring a new
411 kes Ensure only one exit point in several subroutines.
413 kes Implement bsock code to permit locking. Use the new code in Verify
414 in the FD to prevent the heartbeat thread from disrupting the Verify
415 data sent to the Dir.
416 kes Modify SD locking to eliminate locking the reservations system from
417 outside the system. Use the volume lock when getting media data
418 and reserving a new volume at end of media.
419 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
420 when SD starts are not locked into place.
422 kes Fix error compiling runscript code on 64 bit machines.
423 kes Tweak Win32 mount point code.
424 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
425 cleared giving bad file estimate).
426 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
429 kes Keep Schedule run lists in order as suggested by
432 kes Implement autostart scripts for Debian.
433 ebl Implement upgrade catalog scripts.
435 ebl Apply jobstat patch for long term statistics. Have to implement
436 purge stats command and upgrade scripts.
437 kes Fix mtx-changer.in for broken Debian mt program.
439 kes Fix large number of JobMedia records reported by Eric Bollengier.
441 kes Apply doc fix from bug #1062.
442 kes Resolve crash and improper restore wx-console Win32 restore
443 GUI. Fixes bug #1065.
444 kes Update Win32 wxWidgets to latest version.
445 kes Attempt to do correct handling of Win32 mount points. Should
447 kes Fix Win32 FD backup/restore memory leak due to improper termination
448 of BackupRead/Write. This fixes bug# 1038.
450 ebl Reduce memory usage for accurate backup, working only with ctime
451 and mtime. (not all Lstat field)
452 About 40MB for my Linux system (400.000 files)
454 kes Add dcr->reserved_volume flag that allows us to release a volume
455 even if it is not vol->released. This allows maxvol2 to work when
456 Volumes expire and we are already writing to the device (i.e. a
457 volume is pulled out from under us by another job terminating after
458 we reserve the drive).
460 ebl Permit multiple command/console per runscript definition.
461 RunScript { command = /bin/true ; command = /bin/false ... }
462 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
463 (restart an application) just after the VSS snapshot on windows.
464 kes Don't zap dcr values during release_volume() as they might
465 have the next Volume to be mounted.
466 kes Fix AIX prototype.
468 kes Second cut of drive switching during backup.
471 kes Update Win32 version of wxWidgets to most recent version.
472 kes Tweak Copy job details.
473 kes Rework dir_find_next_appendable_volume to make a bit more effort
474 to find a suitable volume before giving up.
476 kes Make ask_sysop_to_create... to return if waken from wait.
477 This helps get out of blocked conditions.
478 kes Experimental implementation of switch_device in reservations.
479 kes Implement FD version to allow easier protocol changes.
480 kes Add Plugin Options string -- not yet passed to FD.
481 kes Implement PluginOptions ACL.
483 kes Attempt to correct problems with restores with autochangers and
484 use counts going negative
485 kes Rework SD status command and implement API for bat. Implements
486 header, runing waitreservation, devices, volumes, spooling,
487 and terminated status keywords.
488 .status storage=xxx <keyword>
489 kes Clarify TLS error message by adding double quotes around name.
490 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
491 kes Pass jcr to tls routines so debug messages can be handled better.
492 kes Rework jobq resource allocation code, and possibly fix a bug
493 that caused reference counts to get out of sync.
495 kes Rename fd/dir plugin to use Bacula standard underscore.
496 kes Plugin work -- bring dir up to fd level.
497 kes Start implementation of VTL code
498 kes Fix Win32 build after adding new cats subroutine.
500 kes First cut at Duplicate Job implementation.
502 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
503 kes Start PluginOptions string, and refactor a bit of ua_run.c
504 ebl Apply Allan patch that permit to reset recyclepool.
506 kes Test patch -- possible fix or improvement for bug #1053
507 kes Refactor FD and SD status commands to permit new API code in
508 SD, and to fix Win32 build.
509 kes Win32 build is now working.
511 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
512 some ideas in patch from Scott Bailey.
513 kes Begin implementation of duplicate Job control.
514 kes Fix some of Win32 build after recent additions.
515 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
516 which causes the FD to detect whether or not the OS has the
517 honor no dump bit (*BSD systems), and if so, to skip backing up
518 any file with this bit set. The feature is enabled by setting
519 'honor no dump flag = yes' in the Options section of a FileSet.
521 kes Correct po warning message with datarootdir
522 kes Implement more code in dird.c to put configuration parsing in
523 a class rather than use globals.
524 kes Restructure SD status command for implementation of bat API
527 kes Suppress incorrect 'Will not descend from x into y' messages.
528 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
529 daemon globals used by parser.
530 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
532 kes Fix free of plugin_list when none exists.
534 ebl Apply accurate project patch.
536 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
537 on non-mempool object)
538 kes First cut of converting FD .status to work with bat API.
540 .status client=XXX header
541 .status client=XXX running
542 .status client=XXX terminated
543 kes Implement first cut of Copy Job.
544 kes Implement Catalog in Pool resource. It overrides catalog specified
545 in the Client resource.
547 kes Apply patch (with some difficulties) from Joao Henrique Freitas
548 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
550 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
551 ftruncate() actually works. In the case of some (cheap) NAS devices,
552 it does not, and so recycling NAS Volumes does not work. The code
553 simply unlink()s the file, then recreates it. This fixes bug #1011.
555 kes First incomplete cut of big malloc blocks for htable.
556 kes Tweak plugin code.
558 kes Plugin debug code + tweak a couple bat dialog layouts
560 kes Fix creating first JobMedia record during Migration to include
561 proper index. This caused slow restores of migrated jobs.
562 kes Temp fix to plugin name file_index.
563 kes Bacula backed up and restored a MySQL database.
565 kes Implement plugin restore.
566 kes Implement parsing of db_driver to give db_type index.
568 kes First cut of plugin restore code.
569 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
570 and do not strip paths on symbolic links.
571 kes Set catalog backup database and user name from values specified on
572 the ./configure line.
573 ebl Fix #1031 about wrong pool source information in job report.
576 kes Remove a redundant jcr argument to find_files, match_files, and
578 kes Implement '.status dir header|scheduled|running|terminated' that
579 prints the requested status section. With the exception of the
580 header, the other reports have fields separated by tabs (\t).
582 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
583 a resource embedded run command to find a since time if no explicit
584 since time was supplied on the command line.
585 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
586 that updates the state file at job termination time in addition to
587 when the daemon terminates.
589 kes First version where a plugin did a backup.
590 bpipe-fd.so created a backup file, wrote a test
591 string to it, and Bacua could restore this fabricated file.
593 kes Implement DB Driver = string for the DBI driver.
594 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
595 kes First cut of code for loading Win32 plugin dlls. Implement
596 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
597 and implement a dlfcn.h file based on opengroup's definitions of
600 kes First cut plugin directives.
602 kes Apply patch from bug #1049 to prevent stripping the path on a
604 kes Attempt to fix bug #1047 where stripping a path corrupts the
605 heap. Waiting for feedback.
606 kes Correct the Mount message not to suggest labeling a new tape
607 when doing a restore. Submitted by email by John Stoffel.
608 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
609 FD by using casting. Reported in bug #1042.
611 kes A bit of crypto cleanup. More later.
613 Release Version 2.2.8
615 kes Apply patch from Martin to correct bug #1040, bscan sets existing
617 kes Fixed important spelling error in doc -- bug #1045.
619 ebl Fix bextract to be able to extract non-portable Win32 data to
621 kes Move initialization of read/write res lock earlier in the code.
622 This fixes the crash with a null conf file. This fixes bug
624 kes Redefine CURES in lib/parse_conf to be URES and move it all
625 into lib/parse_conf.c -- this responds to bug #1042, but does
626 not fix it. The fix is not to compile with FORTIFY_SOURCE.
627 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
628 the trunk SVN. I don't think this was reported as a bug.
630 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
632 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
634 kes Add DataDespooling and DataCommitting status (committing is
635 the last despooling).
636 kes Finish implementation of new reservations code noted below.
638 kes Fix bsnprintf for float point numbers. I broke recently when
639 parameterizing some variables. This fixes bug #1036.
640 kes Undo recent reservations changes ... will apply them later
641 when they work better.
643 ebl Fixes #1034 which cause mysql to hang the connection after 8h
644 ebl Change default statistics target of filename.name and path.path
645 fields for PostgreSQL. This speeds lookup by indexes. Thanks
647 kes A few more tweaks to new reservation code. Make sure to clear
648 vol released flag when retaking volume. When reading label and
649 label is bad mark volume unused. When recycling, mark volume
650 unused so it can be renamed.
652 kes Fix reserve_volume() so it doesn't release a volume in use
653 (i.e. a volume entry not marked released). This should be
654 the last part needed to fix bug #1018.
656 kes Move Heartbeat documentation from Job to Director resource.
657 This fixes bug #1033.
659 kes Fix existing switch drive SD code to call autochanger to release
660 any old volume. This must be done to keep the autochanger from
661 releasing subsequently newly reserved volumes in doing a close().
662 This should fix bug #1018.
663 kes Fail if attempting to get console input in batch mode. This
664 should help fail RunScript console commands that are incomplete.
665 kes First cut implementing switch_drive() in SD (not actually called).
667 kes Implement first cut running console commands in a RunScript.
669 ebl Fixes bug #1028 where 'Selection Type' option was not usable
671 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
674 Release Version 2.2.7
676 kes Add new free_tls() entry point so that Win32 builds.
677 kes Fix compile warning in src/lib/util.c
678 kes Fix entry point for edit_job_codes() so that Win32 builds.
679 kes Fix seg fault Frank Sweetser reports in regression testing
680 on his systems. The problem was that the original author of
681 bsnprintf.c did not take into account the side effects of
682 using ++x in the argument to a #define.
683 kes Make SD protocol backward compatible with version 2.2.x.
685 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
686 because Bacula no longer restores sockets.
687 ebl Always use ignorecase fileset option on win32 FD.
689 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
690 that implements double quoting include names in conf files,
691 and also allows piping input by having the first character
692 be a vertical bar (|).
693 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
694 that implement %f in RunScripts to pass the FileSet name.
695 kes Skip leading | when lex input comes from a pipe as suggested
696 by Michael Stapelberg <michael@stapelberg.de>.
698 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
699 Nerijus Baliunas <nerijus@users.sourceforge.net>
701 kes Implement Plugin Directory and plugin events.
703 kes Implement a security enhancement: TLS authentication but no
704 encryption. Enabled by setting 'TLS Authentication = yes'.
705 Note when this is on, TLS encryption is turned OFF!
707 kes This patch corrects a problem where the maximum concurrent storage
708 jobs counter gets out of sync during restore jobs causing jobs to
709 'wait on max Storage jobs'. This patch fixes bug #1009.
711 kes This patch fixes bcopy so that it produces correct Volumes.
713 kes This patch eliminates spurious output to the console during a VerifyVolume
714 job that contains encrypted data. It fixes bug #1024.
716 kes This patch prevents the 'status dir' command from trying to use a scratch
717 volume and possibly moving it from one pool to another. This patch fixes
720 kes Add new include to postgresql.c suggested by Marc Cousins so
721 that it compiles correctly with pgre version 8.3.
723 kes Fix --archivedir addition to configure. Replace it with
724 --with-archivedir in configure.in This fixes the regression
726 kes This patch fixes bug #1012 where the job is canceled because
727 of Max Run Time exceeded when the job has not yet started.
729 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
730 one 'part' to write. Instead of each part being stored on disk,
731 written to DVD, then deleted from disk, all parts are written to disk,
732 and only the last is written and deleted from disk.
733 kes This patch fixes the status command to include the formating string for
734 JS_AttrInsterting. It fixes bug #1021.
735 kes This patch should fix the Mac OS X build problem on the latest
736 Darwin, where sys/types.h was not included correctly (apparently
737 due to a change in the Mac headers). The solution was to explicitly
738 ensure that it is defined for the ./configure.
739 This patch also has a rebuild of configure that includes the Debian
740 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
741 kes This patch should ensure that queued messages to the console are
742 displayed as soon as possible. It should fix bug 1007, but has been
743 reported not to work.
745 kes This patch fixes the infinite loop when trying to increase the
746 maximum number of volumes in a Pool during the add command.
747 This patch fixes bug #1008.
749 Release Version 2.2.6
751 db Remove extra data on estimate command in joblist for bat.
753 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
754 really change anything, but is the beginning of doing it *right*.
755 To do it completely right the LastWritten date must be passed to
756 the SD, but it is not yet done.
757 kes Minor tweaks to some bat restore SQL.
758 kes This patch fixes bug #1003 where putting the message output from
759 a Verify job into the catalog results in a recursive loop. The problem
760 seems to show up only with postgresql (to be verified).
761 kes Correct %x to %p in postgresql debug statement.
763 kes Fix bug #942 where lots of emails where generated when the heartbeat
764 interval was low and Bacula wanted a different tape from the one in
767 ebl Add new SD despooling attributes and Dir inserting attributes
768 job status codes in the catalog (Status table).
770 ebl Use qmake-qt4 instead of qmake when available (debian system).
772 kes Add a security warning to src/cats/make_catalog_backup.in indicating
773 that passing the password via the command line (arg 3) is insecure.
774 This responds to bug #990 (it doesn't fix it).
776 kes Set default debug_level to zero. This corrects bugs #991 and #993.
777 kes Fix a crash in bat when it cannot connect to the Director for example
778 if the Director is not running.
779 kes Remove redundant INDEX (JobId) from File table in the trunk.
781 kes Make explicit exception to GPL in LICENSE to permit linking
782 the Win32 FD with Microsoft VSS code.
783 kes Apply the Solaris package patch from
784 Masopust, Christian <christian.masopust@siemens.com>
785 kes Apply the patch to optionally add a timestamp in the debug output
786 submitted by Mariusz Czulada <manieq@wp.eu>.
788 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
789 backend (sql_strerror). Fixes bug #989
791 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
792 It applied with no problems.
793 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
795 kes Redirect stderror to stdin on mt status command in mtx-changer.in
796 since the status is returned on stderr on Solaris.
797 kes Activate Close button on tray-monitor window. This fixes
799 kes Check for NULL item in parse_conf.c before calling it. In the
800 case of Device, there is no item and this caused a seg fault when
801 Device appears in the conf file.
802 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
803 avoids pulling in config.h multiple times in some new code.
805 kes Fix spurious warning message printed when creating a volume with
806 a LabelFormat. This fixes bug #976.
808 Release Version 2.2.5
810 kes Add JobId in place of Job name in all the Jmsg() output.
811 kes Correct the APP_DESC for the Win32 storage service (remove an e).
813 kes Make maxvol-test and new more strict maxvol2-test work.
814 kes Print JobId in all Jmsg() job output.
816 kes Add new SD despooling attributes and Dir inserting attributes
817 job status codes. This fixes bug 961.
818 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
820 kes Fix doc issue. This fixes bug #963.
821 kes Fix listing performance problems in bat. Pointed out by
823 kes Remove old debug code.
824 kes Fix bat code that tests for Win32. This should fix bug #968
825 kes Query 5 list wrong Vol after migration. This fixes bug #960
827 ebl Fix #969 where user can't change Replace option in restore menu.
829 kes Save jcr in thread specific data (tsd) for each thread.
830 kes Make Dmsg() print JobId as -%u.
831 kes Make Jmsg, Emsg, and others automatically pickup the jobid
832 for the thread if it exists.
833 kes Remove old reservation debug jid code.
834 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
835 ebl Add an option that permit to specify spool size in job
836 definition. (Applying patches/testing/spoolsize_per_job.patch).
837 You must upgrade SD and DIR at the same time.
838 dvl Add new configuration item --archivedir
839 dvl Adjust regression tests to use tmp not /tmp. This will allow
840 multiple concurrent runs of the regression tests.
842 kes Fix race condition that drops final block written to volume.
843 This happens in rare cases with multiple simultaneous jobs
844 when the Volume fills. This fixes bug #964. May be related
845 to bug #935 and possibly #903.
846 kes Eliminate more strerror() and replace with bstrerror().
847 kes Remove BSD getopt and replace with unrestricted IBM version.
848 kes Fix Win32 build for changed calling sequences.
849 kes More tweaks to the mount volume routines to get everything
850 right. Changed variable name from find to have_vol, which is
851 much easier to understand.
852 kes Enhance btimer debug code.
854 kes Fix FD->SD authorization failure, which was due to spurious
855 wakeups from a pthread_cond_timedwait(). Simply check the
856 predicate before continuing. This fixes bug #953.
857 kes Add const char where needed (more to do). Remove temp debug code.
859 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
860 kes Don't overwrite error message in check_tables_version.
862 kes Unlock batch insert tables with same calls used elsewhere.
863 kes Allow starting 59 jobs a second.
864 kes Make SD session key more random.
865 kes Add retry for SQLite opening db if it fails. Probably helps
867 kes Suppress extra error messages during batch insert failure.
869 kes Add jcr to timer packets so if killed message can be sent to job.
870 kes Add JobId to all Dmsg() output.
871 kes Put some FD auth code on dbglvl rather than fixed.
872 kes Return insert attributes error message in db msg buffer to avoid
873 false error messages. Helps fix bug #966.
874 kes Separate batch init error messages. Probably helps fix bug #966.
875 kes Make SD code that contructs attribute insert check string lengths
877 kes If Dir gets an error during inserting attributes, cancel SD.
878 This reduces unnecessary error messages.
880 kes Correct search boolean for getting Volume info
881 ebl Cleanup batch insert code. Probably fixes bug #965.
882 kes Back out one small change to the reservation system (reserving a volume).
883 kes Rework how a Volume is mounted. It is now much more intelligent and
884 will always attempt to use any mounted volume if possible and reduces
885 calls to the Director asking about volumes.
887 kes Turn off some code when batch insert not enabled.
888 kes Edit FD name in connect error messages.
889 kes Rework the reservation system to take into account that the Director
890 might give us a Volume that is different from the current one being
891 used, and to ensure that we don't exceed Maximum Volume Jobs.
892 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
893 fatal error with multiple jobs running'
894 kes Add more debug code in reservation system.
895 kes Implement maxvol-test to check bug #947.
897 kes Add code to handle tray monitor separated from Win32 FD.
898 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
900 kes Add missed return in fixing verify bug -- trunk only.
901 ebl Fix a command parser issue causing a director segfault.
902 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
904 kes Increase the max block size to 4MB fixes bug #957.
905 kes ERABT if user sets min block size > max block size. Fixes bug #956.
906 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
907 is not properly mounted (recognized) during a poll.
908 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
909 Job that has differences reports Verify OK.
910 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
912 ebl Add an option to operate on all pools with update vol parameters.
913 This complete the project 20. Patch from Nigel Stepp.
914 ebl Add history support to bconsole when using readline.
915 Using Ctrl-D to exit doesn't update .bconsole_history
916 kes Modify new volume algorithm to use max MediaId for generating next
917 volume number rather than the count of Volumes. This should essentially
918 eliminate the failure rate if some volumes were deleted. Bug #921.
919 kes Begin implemention of Optimize Job Scheduling.
920 kes Implement restore callback that Dirk and I agreed on for bat
921 restore. This fixes bug #928. Restore of backup of zero files fails.
922 kes Fix SQL Catalog logging which broke with new db_escape_string
925 Release Version 2.2.4
927 kes Fix bacula_cats.def for new db_escape_string().
928 kes Increase size of name string when FD making connection to SD.
929 May fix bug #953. FD->SD connection failure.
931 kes Add code to help Dan debug 2drive-incremental-2disk test.
932 kes Add code to try to fix bug #908.
933 kes Add waits to multiple exit detection code to try to force pid
934 file to always be deleted.
935 kes Restore good dev.tar.gz to rescue set appropriate binary property.
937 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
938 trying to switch drives by checking for blocking before unblocking.
940 kes Cancel storage daemon in all cases where FD reports error. This
941 should fix virtually all cases of bug #920.
942 kes Fix db_escape_string() for MySQL which did not compile.
944 kes Fix error message that was clobbered when Dir tells SD it does not
945 have write permission on Volume. This should fix a minor point
946 in bug #942, but not the main problem.
947 kes Add code to cancel job in SD if FD connection fails. This should
949 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
950 dvl Pass jcr and db into db_escape_string() to enable better escaping
952 kes Fix migration code to get correct Volume name with multiple volumes
953 by skipping |. Fixes bug #936.
954 kes Implement patch supplied by Landon to fix bug #944 where using
955 TLS with bconsole uses 99+% of the CPU.
956 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
958 kes Move patches into patches directory.
960 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
963 ebl Using 'm' in bconsole will show messages like before,
964 and not memory usage.
965 kes Fix bug #935, and probably also bug #903 where files were not
966 restored. MediaId was not properly set in JobMedia record after
969 kes Suppress chown and chmod error messages if the FD is not running
972 kes Apply Martin Simmons' patch that should turn off the new API usage
973 when batch insert is turned off allowing building on older
975 kes Add ./configure search in qwt-qt4 for qwt package
977 kes Bacula is now free of 3rd party GPL copyrighted code!
979 kes Add guid_to_name.c/h which replace idcache.
980 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
982 ebl Detect if new PosgreSQL batch insert API is present.
983 kes Correct incorrect mempool call causing Director crash. Occurs on
984 systems without va_copy().
985 sb Update spec files for 2.2.1 release
987 kes Fix memory pool call in ua_output.c. bug #934.
988 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
989 Add test program to fnmatch.c
991 kes Integrate patch to README.vc8 from
992 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
993 edit it to get it into Unix patch format.
994 kes Implement mkpath.c to replace old FSF makepath.c
996 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
998 Release Version 2.2.1
1000 kes Update POTFILES.in
1001 kes Cleanup a few underquoted AC_DEFUNs in configure
1002 kes Apply patch from Martin Simmons that adds a test for va_copy to
1005 kes Fix bug #921 by increasing the number of tries to create a new volume
1007 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1008 can be called multiple times. Implement a version for machines
1009 without va_copy() that gets a big buffer.
1011 kes Integrate more portable zone offset code into bsmtp.c
1012 Submitted by Attila Fülöp.
1014 kes Fix bad SD->FD return status reported by
1015 (James Harper) <james.harper@bendigoit.com.au>
1016 ebl Fix a bug in read_close_session which return random status
1017 thanks to James Harper
1019 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1020 and directory names during restore of single file/directories.
1021 kes Add sanity checks to .sql command when string is empty. Hopefully
1022 that will resolve Dirks Director crash.
1024 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1025 in the bsmtp chat subroutine when debug is >= 10.
1027 kes Fix Director crash when running bat SQL queries.
1028 kes Add David's notes on Item 8: Copy pools.
1030 kes Rework projects file to be current and ready for a vote.
1031 kes Enhance lex scanner error message.
1033 kes Tweak LICENSE file to mention BSD code.
1034 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1035 if specified on the ./configure.
1036 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1037 This class is intended to allow us to open a second bsock to the
1038 Director while in the restore subdialog.
1040 kes Fix configure to create bat Makefile before creating dependencies.
1041 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1042 kes Add a tooltip to the tray monitor.
1043 dvl Set the Director's PID file before dropping privs. This fixes
1046 kes Update AUTHORs file
1047 kes Increase the default max concurrent jobs to 20 in FD and SD to
1048 correspond with the default .conf files.
1049 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1050 some different, of the same file created by RN when porting the
1052 kes Rearrange some of the Win32 directories and the placement of the files
1054 kes Set DEVELOPER flag in version.h
1056 ========================================================================
1057 Release Version 2.2.0
1059 kes Apply a second doc patch from Marc.
1060 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1061 improves the tips section that discusses how to setup multiple
1064 kes Update bat README file.
1065 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1066 corrects a typo in the Recycle status check in db_find_next_volume().
1067 This will probably fix a number of annoying problems with multiple
1069 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1070 bnet calls -- no functionality change.
1072 kes Modify the Verify output to specify if files are missing on
1073 the Volume(s) or disk. Fixes confusion in bug #916.
1074 kes When more than one Volume is read in a migration job, the last
1075 Volume bytes reported are from the last read volume rather than
1076 the last written volume. Fixed. This fixes bug #910.
1077 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1078 It previously printed New Recyle flag is: no. This fixes bug
1081 kes Correct seg fault when switching tape drives during restore.
1082 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1083 be used until after 2.2.0 release.
1085 kes Remove fnmatch() in SD that permitted wild card specifications.
1086 This fixes bug #914.
1088 kes Fix %g in filename returned by SQL for browse tree reported by
1090 kes Fix configure so that it puts config.out in the cwd rather than
1092 kes Attempt to fix the locking problem reported by Eric in bug #906.
1093 kes Make berrno class to leave errno unchanged after constructor call.
1094 kes Make bnet_server use the heap rather than the stack to allocate
1095 its socket fd pointers to avoid a crash at termination. Problem
1096 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1098 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1099 and putting it in depkgs-qt along with Qt4.3.
1101 kes Rework code in acquire.c that switches drives for reading when
1102 the Media Type does not match. This should fix bug #906
1104 ebl Fix a director segfault during job setup #907
1105 kes Correct seg fault in postgresql when first operation returns no
1106 rows. Fixes Dirks File browser problem seg fault with bat.
1108 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1109 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1112 kes Implement PopUp YES/NO dialog for bat.
1114 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1116 kes Correct RunScript to terminate job in FD on failure.
1117 kes Change abort_on_error and AbortJobOnError to fail_on_error
1118 and FailJobOnError in RunScripts.
1119 kes Minor tweaks of code formating in RunScripts, principally to
1120 avoid depassing 80 columns.
1122 kes Eliminate one #ifdef Win32 in bsmtp
1123 kes Implement grow tool to grow a file for testing very large databases.
1124 kes Add big-vol-test to test Bacula seeking with > 5GB.
1127 kes Modify find_next_volume() to return all values in Media record.
1128 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1132 kes Update Release notes
1134 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1135 Warning, in previous beta version, all media get from scratch keep their
1138 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1139 This should fix bug #842. Made a note to look at removing the temp
1140 files at the end of the install.
1141 kes Add ability to mount and unmount a file device providing it is
1142 marked as being removable and has the appropriate mount and unmount
1143 commands defined in the Device resource. This fixes bug #830.
1144 kes When applying a storage override, release all previous storage
1145 definitions rather than just prepending the new storage.
1146 This should prevent a good deal of confusion.
1148 kes Implement ./configure search for qwt libraries.
1150 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1151 Win32 FD. This should fix bug #893.
1152 kes Remove an unnecessary beep in Win32 init code.
1153 kes Update copyright dates in Win32 executable about boxes.
1154 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1155 code with a BSD getopt.c and getopt.h.
1156 kes Remove sched.h from the Win32 compat directory -- not used.
1157 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1158 need to shut it down, do it through the services panel or the command
1160 kes Remove some inappropriate Bacula FSFE copyrights.
1161 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1162 kes Fix regress config non-portable test as pointed out by
1163 Florian Heigl <florian.heigl@gmail.com>
1164 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1165 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1167 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1168 Reported by Frank Sweetser.
1172 kes Fix client-only build.
1173 kes Integrate client-only fixes for bsys (initgroups) and conio from
1174 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1175 kes Make arguments to get_scratch_volume() in same order as other
1177 kes Rework the prune_volumes() subroutine so that after purging and
1178 no volume found in desired pool, it will check for a scratch
1179 volume. This prevents recycling the whole scratch pool.
1180 kes Add code to status storage to print boffset_t (largefile support).
1182 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1183 kes You now need a --with-qwt=<dir> to be able to build bat.
1184 kes Update src/win32/cats/bacula_cats.def to include the new
1185 db_get_query_dbids() call on Win32.
1187 kes Correct a problem when selecting a scratch volume and moving
1188 it to another pool that lost some columns.
1189 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1190 kes Enhance Autochanger error messages to include Volume and device name.
1191 kes Rework prune_volumes() code to take account of InChanger flag,
1192 and to handle recycling volumes going to the Scratch pool and
1193 current pool because the RecyclePool directive.
1194 kes Implement a better and more efficient db_get_query_dbids() to
1195 handle creating and passing back a list of DBIds.
1199 kes Start work on new more efficient DBId subroutine. First use
1200 will be for recycling volume to Scratch inchanger.
1201 kes Increase number of JobIds in pruning from 1000 to 10000.
1202 This to be replaced by above routine.
1203 kes Begin implementation of building Qt4 on Win32.
1204 kes Correct typo in fix I added for bad TLS shutdown.
1205 kes Pull 2.0.3 patches into patches directory.
1206 kes Update Release notes. Include qt-console in line count.
1207 kes Update Projects file.
1209 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1210 bug in migration code where a job that spanned two volumes
1213 kes Implement new BST_DESPOOLING blocked state. Change from locking
1214 during despooling in SD to blocking. This means that other threads
1215 can work with the device structure, in particular the reservations
1216 system while despooling.
1218 kes Fix return in reservation message queue that missed clearing
1219 the jcr lock (implemented 26Jun07 below).
1220 kes Rename a number of dev methods to make locking function names
1222 kes Document locking in lock.c. Move lock structures to new file
1225 kes Move reservations message lock to lock jcr only this
1227 kes Move main SD locking code into lock.c (new file).
1228 kes Update Win32 build to include lock.c
1232 kes Dirk committed the qwt library code for drawing graphs in bat.
1233 kes Tweak install of qwt so that it is integrated with ./configure.
1235 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1236 out by Eric (my typo).
1237 ebl Fix configure.in to get batch mode enable
1238 kes Return correct string from authenticate.cpp in bat when connecting
1240 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1241 spurious line drops when using TLS.
1242 kes Do not file reparse points when restoring a file that already
1245 kes Implement Windows reparse points -- similar to directories, but
1246 we do not descend into it. This is a first cut. They seem to
1247 be backed up, but restore is not yet tested.
1248 kes Remove restore_blocking in tls code when shutting a socket to leave
1249 it in blocking mode. Hopefully this will fix the encryption bug
1250 reported by Frank Sweetser.
1251 kes When opening a file for backup, tell the OS that we are going to
1252 read it sequentially -- optimization.
1253 kes Change variable names in authenticate_director() to not conflict
1254 with member names in bat. Caused great confusion with compiler,
1257 kes Queue openssl error messages in case of comm problem.
1258 kes Do shutdown() call if socket terminated.
1259 kes Remove some duplicated code in tls.c
1260 kes Move more of the bsock member variables into private and access
1262 kes Add Frank Sweetser's tls-test to the regression suite.
1264 kes Add Swedish sv.po file
1266 kes Don't print clock skew message in FD if less than 3 seconds diff.
1267 kes Add a bit of VSS info to status client.
1268 kes Implement a first cut of Vista VSS, using Win2003 code.
1270 Release: 2.1.20 beta
1272 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1273 loaded tape but uses first drive).
1274 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1275 This was indeed a Win32 issue.
1277 kes Simplify search of autochanger for in-use Volume.
1278 kes Fix exit condition of check for in-use volume. kes Remove
1279 inappropriate my_postgresql_free_result() in db_close()
1281 kes Fix bad return in FD when encryption signature not found.
1282 Probably caused a crash.
1283 kes Inhibit missing encryption signature error messages for
1284 file types where no signature computed.
1285 kes Correct inverted check on autochanger in reservation system.
1286 kes Tweak debug code in autochanger reservation.
1288 kes Add some additional locking in the cats directory in subroutines
1289 that modify packet variables called from batch insert.
1290 kes Rework how dcrs are allocated. new_dcr() can now be called
1291 with an existing pointer, and it will simply clean it up.
1292 This allows the reservation system to test various different
1293 devices, and will permit easy device changes.
1294 kes A bunch of changes all over to handle new new_dcr() calling
1296 kes Work more on the Volume management in the SD. Remember Volumes
1297 for tape drives and for autochangers (even virtual disk changers).
1298 kes When looking at the Volume list to reserve a drive, handle
1299 autochanger names correctly by interating through the changer
1300 devices. Also call the Director to see if a Volume is suitable
1301 for the current job.
1302 kes Fix some bugs in bscan. Make sure all media records are written.
1303 Make sure that valid JobMedia records are written for disk files.
1304 Previously they were completely wrong.
1305 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1306 that the URLs don't change and so that the developers will all
1307 work off the same copy. Rebuild from scrach.
1308 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1310 Release: 2.1.18 beta
1312 kes Fix seg fault in FD from incorrect digest size.
1313 kes Fix argument to non-OpenSSL crypto.c subroutine.
1315 Release: 2.1.16 beta
1317 kes Remove a few malloc()s from the encryption code.
1318 kes Use the class calls to bsock in filed/backup.c and restore.c in
1319 place of the old bnet_xxx code.
1320 kes Implement code that does an on the fly calculation of the
1321 signing digest during restore of encrypted files. It makes
1322 a best guess at the algorithm, and if it is not correct, will
1323 then revert to the old code which reads the file after it is
1325 kes Implement at least one missing crypto stream in stream_to_ascii()
1326 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1327 #877 where a reload with bad syntax causes Dir to exit.
1329 Cut: 2.1.14 beta (not released)
1331 kes Do not free a volume on a tape drive until another volume is
1332 mounted and read, or the autochanger unloads the volume.
1333 This should help the SD re-use volumes that are already mounted,
1334 and should fix bug #886.
1335 kes Apply patch from user brettedgar that allows gnome2-console include
1336 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1337 kes Apply patch from Lucien Weller that fixes day of week calculation
1338 because of DST flag problem. Fixes bug #887.
1340 kes Move find_next_appendable_volume() to after acquiring a valid device
1341 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1343 kes Unable to reproduce bug 872. However added additional testing for
1345 kes Bug #874 resolved by documenting SQLite limitations.
1346 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1347 kes Bug #881 resolved by removing typo in mtx-changer script.
1348 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1349 approval. Added a link to the wiki on the web page, and implemented
1350 a backup from http://paramount.ind.wpi.edu
1352 kes Fix update allfrompool to pass pool name.
1354 kes Convert to pure GPL v2 license.
1355 kes Fix sscanf problems reported by Peter Buschman that caused
1356 a bus error on Solaris.
1357 kes Rework (simplify) the select prompt in bat.
1358 kes Move get_jobid_from_tid() into lib and create a
1360 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1361 should definitely fix the problem of lost error messages in the
1363 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1364 kes Eliminate tcpd.h from the project. Enclose the #include from the
1365 library with extern C ...
1366 kes Add print of signal name when a signal is trapped.
1368 Release: 2.1.12 beta
1370 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1372 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1373 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1374 makes SQLit3 run 30 times faster, though a bit less safe.
1375 kes Implement --with-batch-insert in configure and detection of thread
1376 safe libraries. It is on by default, but turned off if no thread
1377 safe library (e.g. SQLite 2) is available.
1379 kes Fix Bacula PostgreSQL buffer overruns.
1380 kes Do better checking for NULL results returned from PostgreSQL;
1381 implement retry for failed queries; clear results buffer after
1382 failed query. Hopefully this will correct the PostgreSQL failures.
1384 kes Implement algorithm to handle only one appendable volume with
1385 Prefer Mounted Volumes = no.
1386 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1387 returned from a query.
1388 kes Make volume lock recursive.
1389 kes Implement an additional volume reservation algorithm that
1390 starts by considering all reserved volumes then uses the
1391 old brute force algorithm of searching the resources to
1392 find a suitable device.
1393 kes Add new reservations debug code and refine the old code.
1394 kes Update the win32/dll/bacula.defs file.
1396 kes Tweak reservations algorithm to permit a few more cases, i.e.
1397 volume reserved, but on different drive, ...
1398 kes Enhance SD status to include Pool and Media Type for drive in a
1399 more readable format (a bit longer).
1400 kes Fix PostgreSQL double free.
1402 kes Minor refactoring of restore decryption code.
1403 kes Add code to smartall.c to detect double free of a buffer.
1405 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1406 so that bsmtp will create a correct email address (mailbox only).
1407 kes Modify 'memory' command so that the buffers are listed as 'In use'
1408 to avoid confusion with Orphaned buffers.
1409 kes I reworked the OpenSSL include/lib flags to be handled in
1410 the standard Bacula way, which should fix bug #863 concerning
1411 non-standard OpenSSL libraries.
1413 kes Implement Help Browser window for bat.
1414 kes Fix reload bug that reset StorageId to zero.
1416 kes Fix TLS #ifdefing when TLS turned off.
1417 kes Ensure that when labelling a tape with Slot=0 that InChanger
1419 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1421 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1422 add DISTINCT (required by PostgreSQL).
1423 kes Implement BSOCK authenticate_director() method. Eventually will
1424 authenicate all daemons.
1425 kes Move several more functions into the BSOCK class.
1427 kes Add code to tell the OS that we no longer need a cached
1428 file that we were reading. In findlib/bfile.c. Also,
1429 only cache files that we are reading. Thanks to
1430 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1431 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1432 kes Implement script to automatically generate cats and dll .def
1433 files for Win32 dll.
1434 kes Update README.mingw32 to include new .def file generation.
1435 kes Correct typo in UTF-8 error message as reported by:
1436 jhernandez <julianhernandez@gmail.com>
1437 kes Add additional sm_check() code on debug level 1.
1438 kes Set default debug level to 1.
1439 kes Trap SIGABRT in attempt to get traceback.
1441 kes Reduce bat connect timeout from 30 to 15 seconds.
1442 kes More restructuring and implementing BSOCK class in place of
1444 kes Remove a few unnecessary malloc() tests in crypto code.
1445 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1446 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1447 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1449 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1451 kes Fix Verify InitCatalog. The attributes were not pointing to the
1452 correct saved location.
1453 kes Implement message callback so that GUI is sure to get all
1454 daemon messages. Currently displayed in a dialog in bat.
1455 kes Ignore SIGUSR2 (Bacula timer) in bat.
1456 kes Apply regress patch from bug #859 to allow regress to work
1457 with Solaris compiler.
1459 kes Begin adding TLS support to bat.
1460 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1461 clean up lex.c and make it more readable.
1463 kes Move more bnet functions into the BSOCK class.
1464 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1465 kes Complete change of berrno strerror() method to bstrerror()
1467 Release: 2.1.10 beta
1469 kes Cleanup incorrect email addresses in bsmtp.
1470 kes Make bat display initial messages rather than discard them.
1472 kes First cut of adding .mod to the run command.
1473 kes Implement auto display of messages in bat.
1474 kes Enhanced preferences to allow all Bacula output to be
1477 kes Try to make bsmtp date routines more generic.
1478 kes Fixed bug #856 autochanger documentation.
1479 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1480 kes Add new cats entry point so Win32 builds.
1482 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1484 kes Do better checking for the MySQL 64 bit libraries looking for both
1485 .a and .so libraries.
1486 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1487 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1488 kes Require the thread safe version of MySQL during configure. Thanks
1489 to Andre Noll for pointing this out.
1490 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1491 continuing in migration code.
1492 kes Apply implementation of tray-monitor font derived from gnome-console
1493 submitted by Andreas Piesk <a.piesk@gmx.net>
1495 kes Eliminate important memory loss in SQLite
1496 kes Fixed the batch insert MySQL thread specific data that was not
1497 being freed. See cats/mysql.c:db_thread_cleanup().
1498 kes Fix restore before command.
1499 kes Convert old hdr.name to name() in a few places.
1500 kes Implement update jobid command.
1501 kes Return all time_t dates in db_get_job_record()
1502 kes Stop watchdog in SD earlier.
1503 kes Put Pool just after Storage in please mount message.
1504 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1507 kes Update the po files.
1508 kes Fix Verify InitCatalog by making it cache attributes.
1510 kes Change name bacula-bat to bat for man 1 page to correspond to
1512 kes Check for client and store NULL pointers in status command. This
1514 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1515 kes Fix sign extended editing of %p.
1516 kes Clean out a little old #ifdefing in cats/mysql.c
1518 kes If time diff between DIR and FD is more than 600 seconds convert
1519 INFO message to WARNING.
1520 kes Implement heap size display in status for all daemons.
1521 kes Attempt to fix MySQL db open memory loss (not successfull).
1522 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1523 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1524 Query. This looks like a MySQL but but by doing extra releases,
1525 the memory goes away. This should fix bug #847.
1527 kes When backup fails, cancel SD before waiting for sd termination.
1528 kes If SD is waiting for FD to connect during cancel, wake up the
1530 kes Fix fsf code so that errno is correctly reported.
1531 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1533 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1534 so that Bacula doesn't later stumble into a seg fault.
1535 kes Use the term Restore Client in the restore Job report.
1536 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1537 the original job's FileSetId.
1538 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1539 spooling in migration jobs. Not yet tested.
1540 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1541 reading conf file from a pipe. However, do it with open_bpipe()
1542 rather than popen. Not yet tested.
1544 kes Fix an ugly bug where the VolCatBytes were getting updated
1546 kes Implement bconsole memory command that prints current memory
1547 usage, plus smartalloc dump.
1548 kes Clarify some error messages in backup, admin, and migrate.
1549 kes Shrink label dialog to smaller size.
1550 kes Invert Cancel OK buttons on restore to be OK Cancel.
1551 kes More strerror() to bstrerror() conversions.
1553 kes Start implementing bstrerror() in place of strerror().
1554 kes Stripping path -- seems to work.
1556 kes Prevent door and port files from being restored (mostly
1558 kes Free an unreleased buffer in compat code.
1559 kes Change console Job name from *Console* to -Console- to eliminate
1560 Win32 filename problems. Put Win32 path separator when creating
1561 Console file. This fixes bug #846.
1562 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1564 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1566 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1567 to force Win32 error message.
1569 kes First cut strip path. The data should be passed to the FD,
1570 but nothing is done with it yet.
1571 kes Enhance the digest and signature routines in the crypto
1572 library to accept a JCR and to use it to print error messages
1573 so that they will go in the Job report rather than the daemon's
1575 kes Simplify some of the verify signature code.
1576 kes Simplify a few of the alternative returns in the signature
1579 ebl Use only POSIX regex instead of GNU regex in breg.c for
1580 File relocation. It fix broken freebsd compilation.
1581 kes Convert all other Dir files to use new ua class message
1583 kes Tentative fix for missing digest signature in bug 807.
1584 kes Correct handle problem in new win32_ftruncate routine.
1585 kes Convert ua_purge.c and ua_update.c to use new ua class
1586 message routines for bat.
1588 kes Correct incorrect installation of LICENSE in Win32 installer.
1589 kes Display LICENSE at the beginning of the Win32 install.
1590 kes Attempt to correct the need for the png files to be installed
1592 kes Reapply my bat.conf install script in qt-console. I think I
1593 editted bat.pro instead of bat.pro.in and it was lost.
1594 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1595 the /var/lock/subsys for subsysdir. Also corrects typos in the
1598 kes First cut update job.
1599 kes Correct configure to include qmake of src/qt-console directory.
1601 kes Make restore job yes/mod/no print in one command so GUI works.
1602 kes First cut implementing backup and restore client.
1603 kes Correct editing in Verify output that caused a seg fault.
1605 kes Insure that bat.conf is not overwritten during installation.
1606 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1607 while I was implementing migration in March 2006 !
1609 ebl Cleanup file relocation, using char *RegexWhere instead of
1610 char *where + bool where_use_regexp
1611 kes Update some manpages and add bat manpage.
1612 kes Make a first cut at converting bacula.spec.in for bwx-console
1614 kes Apply patch from John Goerzen to add hostname as fourth argument
1615 to make_catalog_backup script.
1616 kes Fix typos I introduced into bsmtp.c
1617 kes Make pm_strxxx() routines handle input of NULL pointer. This
1618 is to protect from NULL pointers returned from SQL databases.
1619 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1620 kes Add more debug to FIFO code -- fix fifo regression test.
1622 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1623 kes Add thread timer to bnet_connect() to break from OS if wait time
1626 kes Update Win32 build to include new files, new symbols, and
1628 kes Implement socket level heartbeat (tcp_keepidle)
1629 ebl Commit File relocation patch
1630 kes Make bat have 'make install' target.
1631 kes Warn during install if old gnome-console binary found.
1632 kes Warn during install if old wx-console binary found.
1633 kes Add -8 option to bsmtp command line to add content type utf-8.
1634 Fixes bug #809. (Character coding problem in bsmtp).
1635 kes If < is found in target (from, to, cc) then do not enclose the
1636 target in < > in bsmtp. Fixes bug #772 (malformed address).
1637 kes When printing certain items in dbcheck, stop after 300000.
1638 Fixes bug #822. (dbcheck loops).
1639 kes Incorrect status in Dir after waiting for mount with poll set.
1642 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1644 kes Print waiting to reserve a device every 5 mins.
1646 kes Don't call close_part in label.c if tape and relabel.
1647 kes Don't free volume if busy in close() -- should help with
1649 ebl Fix #824 RunScript bug (After script could be execute twice)
1650 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1651 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1652 Add a regression script to test RunScript
1654 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1657 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1658 deprecated. No additional bugs will be fixed, and they will be dropped
1659 in a future release (probably 2.4.0).
1660 kes Change name of wx-console to bwx-console to make it more Bacula
1662 kes Change the name of gnome-console to bgnome-console to make it
1665 kes Some time in March, a Feature Request with patch from Jorj Bauer
1666 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1668 The ability for the director to validate a Client (FD) CN against
1669 an arbitrary set of patterns rather than the hostname, with
1670 A new 'TLS Allowed CN' set of directives which are implemented
1671 in the Client resource. Then pattern matching is used in place
1672 of hostname matching against the Certificate's CN. As an example, we
1673 have certificates which (a) use a local CA, and (b) have a CN of the
1675 kes Add new/changed entry points to Win32 build
1676 kes Create unaccepted-projects for projects that are not accepted.
1677 kes Simplify locking in the reservations system.
1678 kes Add more debug code in reservations.
1679 kes Make sure error condition on reserving a volume is handled correctly.
1680 kes Correct handling of volume_in_use.
1681 kes Correct handling of initializing a device.
1682 kes Move handling of broadcasting releasing a device into release_device().
1683 kes Correct attaching dcr to dev so that it is only done if device
1684 is properly initiated.
1686 kes Locking debug level tweaks in SD.
1687 kes Tweak new Volume code.
1689 kes Add exec external-command [wait-seconds] to bconsole. This
1690 executes the external-command. Note! normally external-command
1691 should be enclosed in double quotes.
1692 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1693 it should normally be off in a production system.
1695 kes Implement die command for SD so that we can force it to dump.
1696 kes Implement SD lock debug code.
1697 kes Implement new algorithm for keeping Volume list in SD. It
1698 is now owned by the device.
1700 kes Implement new code for freeing in use volumes that should
1701 resolve if not all, some of the problems of multiple drive
1702 tape conflicts described in bug 801.
1704 kes Fix gui/bacula-web/images files in svn.
1705 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1707 ebl Fix a bug in batch mode (in string escape)
1708 kes Correct migration prune SQL typo that crept in in a
1709 recent 2.1.x change.
1711 kes Move bnet_despool() into class in bsock.c
1712 kes Modify job report to include director name and Build OS.
1713 kes Move drop root privilege and check_catalog() before fork.
1714 kes Add update database scripts (version 9 to 10) to updatedb directory.
1716 ebl Check size and age of each file after its backup to see if
1717 it has changed during backup, if 'checkfilechanges' is set.
1718 The FD will do an extra check (stat(2)) after
1719 each file backup. mtime, ctime and size are compared with
1720 'before backup' information. If time or size mismatch, an
1721 error message will be generated. You must upgrade FD to use it.
1723 kes Make database name and user configurable
1724 --with-db-name=xxx --with-db-user=xxx
1725 kes Add back database type to message.c for debugging.
1727 kes Implement dir_sql() which issues an SQL query.
1728 kes Modify bat medialist to use dir_sql() and do some minor C++
1729 formatting as well as eliminating a number of pointers, simplifing
1732 kes Fix some of the mtx-changer grep commands for tape label readers.
1733 kes Convert a number of bsendmsg into the appropriate send/warning/error
1734 message class calls.
1735 kes Suppress the using database message in the .sql command.
1736 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1738 kes Add context menu for floating a window.
1739 kes Some minor cleanup and name changes in qt-console
1740 kes Add doing mt setblk 0 in Win32 mtx-changer.
1741 kes Apply Martin's bug fix to move definition of ENODATA for
1743 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1744 sqlite2 and sqlite3.
1746 kes More pruning cleanup.
1747 kes Turn on wait_for_drive by default in mtx-changer.
1748 kes Turn on Batch insert code by default as it now passes regression.
1749 kes Add ./configure --enable-bat to enable building of Bat.
1750 No install yet though.
1752 kes Implement a new .sql command for bat.
1753 kes Implement code to turn off pruning in obtaining the next volume.
1754 Pruning is turned off for the status dir command, but turned on
1755 for SD requests and for the list nextvolume command.
1757 kes Correct Qmsg() that was not updated correctly when committing a
1758 previous change (probably the recent TLS patch).
1760 kes Write new subroutine is_volume_purged() that explicitly checks
1761 if the Volume is purged, and if so marks it as such. This should
1762 resolve problems reported about needing to mount twice to recycle
1764 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1765 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1766 amount of duplicated code.
1767 kes Do volume pruning only for the Media Type desired (reduces pruning time
1768 if multiple Media Types are in the same pool).
1769 kes Implement more detailed info in the Job report for the Bacula version
1771 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1773 ebl Add bbatch tool to bench database and insert mode.
1774 Fix sql quote stuff in batch mode
1775 Fix sql stuff for mysql
1777 kes Correct problems with am/pm scheduling. Fixes bug #808.
1778 kes Implement new prunning code that prunes up to 1000 jobs at
1779 the same time. The same technique can be applied to a number
1780 of other prune/purge subroutines.
1781 kes Add an insanity check when starting a new tape job to ensure
1782 that the tape position has not been changed. If so fail the
1784 kes Fix Win32 build for dlls to add the folllowing:
1785 src/lib/bsock.c -- new file with new entry points
1786 src/lib/dlist.c -- new entry points
1787 src/cats/sql_create.c -- new entry point
1788 src/cats/sql_cmds.c -- new DATA item exported
1790 ebl batch mode cleanup bscan-test is ok now.
1791 kes Implement SD code to check length of disk volume before appending.
1793 kes Correct return status on db_batch... routines.
1794 kes Add call to db_write_batch_file_records() to migration code.
1795 ebl Fix AfterJob timing
1796 kes Move the checking of the database in initializion of the Director
1797 to after we drop privileges. This avoids the need for both root
1798 and bacula access to the DB.
1799 kes Correct a misplaced variable definition in src/filed/backup.c
1800 kes Correct how the new batch insert db_create_attributes_record()
1801 uses the arguments. Caused a seg fault in bscan.
1802 kes Implement lock() and unlock() methods in DEVICE class.
1803 Implement block() and set_block(xx) methods in DEVICE class.
1804 kes Modify bnet_connect() so that it uses time() to check for the
1805 wait time expiring (on some OSes, some system calls may not
1806 return immediately).
1807 kes Modify Verify to obtain the previous JobId when it is actually
1808 running rather than at schedule time (as it was in 1.38.x).
1809 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1811 kes When checking pid in pid file, continue running if the pid is
1812 the same as ours. This occurs on IRIX after a system crash.
1815 kes Extend new GUI API.
1816 kes Make the ua structure a class, and implement send_msg(),
1817 error_msg(), warning_msg(), and info_msg().
1819 kes Apply fix from for building wx-console on the Mac from
1821 kes Implement new select mechanism for GUI programs.
1822 kes Reorganize initialization of stackedWidgets in bat.
1824 kes Add updated nagios plugin supplied by Christian Masopust.
1826 kes More bat implementation.
1827 kes File migrate bug with Pool Occupancy using mediaid instead
1828 of jobids. Fixes bug #795.
1829 kes Fix orphaned buffers in filed backup and verify due to
1830 crypto buffers not freed during errors. Fixes bug #789.
1831 kes Extend new GUI api code to tree commands.
1832 kes Ensure that tree and dot commands check console ACLs.
1833 kes Permit marking directory with trailing slash.
1834 kes Allow 20 console connections (instead of only 10).
1836 kes Add smartctl call to bacula-sd.conf as an example of getting
1839 kes Modify jobq.c to let simultaneous restore jobs run. This may
1840 cause them to fail if they cannot get a drive.
1841 kes Add Client Connect Wait to Storage daemon to permit users to
1842 modify the time the SD waits for a FD connection.
1844 kes Correct virtual changer check which was backwards. This caused
1845 volumes to be unloaded into slots already occupied.
1847 kes Apply Command ACL filter to JobId list in restore command.
1848 kes Correct typeo in var.c patch.
1850 kes Don't let Bacula prune File or Job records for the current Job.
1851 kes Fix variable substitution pad + inc bug reported (with patch)
1854 kes Correct SQLite log table index as reported by Luca Berra.
1856 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1858 kes Begin implementing new comm signals for API.
1859 kes Fix a few places in lib/message.c where the open fd may
1861 kes Continue implementing lib/bsock.c (real class). Make jcr,
1862 who, host, and port private. There are new methods to access
1863 them for non-class use. This required touching a number of files.
1865 kes Add LANG=C to autoconf/randpass so it works with languages other
1866 than English. Fixes bug #788.
1868 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1870 You will not be able to generate Include/Exclude list any more.
1871 It will be fixed soon.
1872 If you want to use this, you can apply
1873 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1875 kes Restore of sockets created false error messages because Bacula
1876 no longer restores sockets, but the code was still trying to
1877 set the attributes on a non-existent file. Reported by a user.
1878 ebl finish RecyclePool feature
1879 Media will takes Pool.RecyclePool
1880 when moving from Scratch to a Pool or when user will do
1881 update volume=xxx frompool
1882 To use it, add RecyclePool = aPool to your Pool resource
1885 RecyclePool = Scratch
1889 kes Expand new BSOCK class adding signal() and new BNET signals.
1890 kes Begin enhancing the dot commands adding a new API function
1891 that returns more information and will make it easier
1892 to interface to the Director from a program.
1894 kes Make DEVICE fd private. Its new name is m_fd, and can be
1895 obtained with dev->fd() outside the class. This is the
1896 first of many DEVICE members to be made private.
1897 kes Implement Michael Renner's idea on having a virtual disk
1898 changer. I made some minor modifications (e.g. I did not
1899 implement the Virtual Changer directive, but simply set
1900 the Changer Command to an empty string.
1902 kes Implement a BSOCK send() method that writes the whole record
1903 in a single write() request rather than in two.
1904 ebl add update volume=xxx recyclepool=yyyy
1905 volume takes recyclepool from pool when using update volume=xxx from pool
1907 kes Fix encryption deblocking bug, which caused some restored files
1908 to be truncated. This fixes bug #763.
1909 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1910 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1912 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1913 ebl Use btime_t instead of uint64_t in media patch.
1915 kes Optimize the use of the database a bit in the Status dir command.
1916 Only open it when needed, ensure that if any previous database
1917 was opened, it is closed.
1919 kes Correct VolCatBytes bug from media patch.
1920 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1921 in the case of orphaned records.
1922 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1923 and File records in 300K chunks to be more efficient. This
1924 idea came from Juan Luis Frances (if I remember right).
1925 kes Apply Eric's scratch patch that moves a purged Volume to
1926 the RecyclePool. Question: how is RecyclePool set? what
1927 happens to the ScratchPool?
1928 kes Apply Eric's media patch that collects read/write media
1929 times as well as byte counts. This patch requires a
1930 simultaneous upgrade of the DIR and SD. Note, there
1931 should be some way to turn off timing. I'm not sure
1932 times are in Bacula units.
1933 kes Apply Eric's batch-insert patch.
1935 kes Update projects list.
1937 kes Implement Include/Exclude file lists in FD as dlists using
1938 the new dlistString class. This permits efficiently having
1939 large include/exclude lists and completes project Item 25.
1940 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1941 console is authorized to cancel the job. This fixes bug
1943 kes Modify SD so that the VolCatJobs medium record is updated
1944 at the beginning of a Job rather than the end. This
1945 fixes bug #775 where exceeding MaxVolJobs caused jobs
1947 kes Added a mutex around getting and setting Volume information
1948 so that multiple simultaneous jobs will single thread.
1950 Switch to using Subversion
1951 kes Remove src/pygtk-console/ from configure
1953 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1954 plus the entrypoints.
1955 kes Apply patch supplied that corrects debug print
1956 in canceling jobs for max run time. Supplied as
1957 part of bug #621, which was previously fixed.
1959 kes Test on job_canceled() and sd_msg_thread_done inside
1960 loop starting the message thread to avoid a race condition.
1962 kes Remove rl_catch_signal from console.c as it conflicted
1963 with the header definition. Fixes bug #765.
1964 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1966 kes Clarify some stored/acquire messages to indicate if the
1967 problem is with read or append.
1969 kes Fix memory leak with storage ids in cats/sql_get.c
1970 kes Terminate watchdog earlier to avoid reference to released
1971 memory -- reported by Jason Austin.
1972 kes Move closing the database from jobq.c to the director daemon
1973 termination routine. This fixes memory leaks for shadow jobs
1974 (i.e. migration jobs).
1975 kes Free up the unique jobid chain items in migrate.c. This fixes
1976 a memory leak problem.
1977 kes Convert some ugly looking for statements to use foreach_alist
1978 in findlib/find.c. This will facilitate converting the structures
1979 to use dlist (for large include/exclude lists).
1980 kes Fix a bug in the btree.c and btree.h routines, then rename them
1981 rblist and add them to be built in src/lib. Include some new
1982 methods written by Rudolf Cejka that make the code more readable
1983 (hides some of the ugly casting).
1984 kes Add set_next() and set_prev() methods which make the code much more
1985 readable. Also add a new dlistString class that facilitates storing
1986 strings in dlists. To be used in the large include/exclude lists.
1987 kes Make some trivial modifications to lib/tree.h that use rblist
1988 rather than dlist for storing the tree links. This was suggested
1989 by Rudolf Cejka. The result of this is that the restore tree now
1990 uses red-black binary trees rather than simple linked lists. This
1991 should give rather dramatic speed improvements for directories
1992 contining large numbers of directories/files (more than 10000).
1994 kes Fix maxruntime bug #621.
1996 ebl Implement the include JobID in spool file name project.
1997 kes Reorder projects file in order determined by Jan 2007 vote.
1998 kes Implement item #12 on project list -- quick release of FD by
2000 kes Fix open of SQLite3 db where user does not have write permission
2001 so that DIR does not crash. Fixes bug #761.
2003 kes Add back missing @ in Win32 Makefile.
2004 kes Change 'Device not configured to autolabel' from INFO
2006 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2007 which should restart an indefinite # of times.
2008 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2009 other DIR specifications.
2011 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2012 Fix path quoting in SQLite scripts.
2013 Fix problems with SHGetFolderPath.
2015 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2017 kes Fix Job restart on error bug that promotes an Inc to a Full
2018 backup. This should fix bug #755.
2019 kes Add qt-console and first cut of code.
2023 kes Fix Bacula->Documentation link on Win32 to point to index.html
2024 instead of bacula.html. Fixed bug #750.
2025 kes Return JobId in db_get_job_record() when JobId==0. This should
2027 kes Do not release source pointers when restarting a failed job.
2029 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2030 This *should* fix bug #747.
2031 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2034 kes Modify USTORE constructor to set an empty store_source string,
2035 and don't copy the store_source string in a cancel. Hopefully
2036 this will fix Arno's seg fault, bug #744.
2037 kes Add back code to disable conio in configure. Fixes bug #743.
2038 kes Correct the Options scanner in the FD to correctly handle
2039 SHA1 option, which was eating the next option. Reported by
2041 kes Add code to indicate when the SD is spooling, spool wait, and
2042 despooling as requested by Alan Brown.
2044 Version 2.0.0 released: 4 January 2007