1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
34 kes Attempt to implement a kludge to make Qt work with bat
36 kes Setup rstorage correctly. Virtual backups are working.
38 kes Move setting JobLevel and JobType into a method, which should
39 allow completing Virtual Backups.
40 kes Fix verify jobs to work again.
42 kes Virtual Backup tweaks -- it is close to working.
44 kes Ensure that SD tried to mount a volume not in an autochanger
45 at least once before asking for operator intervention.
46 kes Make SD aware of Virtual Backup jobs.
47 kes Add VirtualFull for bat.
48 kes Changes to get read storage correct for Virtual Backup.
50 kes Remove old code from label.c
51 kes Split display_display_info() out of write_bsr_file()
52 kes do_vbackup_init() working -- i.e. bootstrap file built.
53 kes Change Bacula trademark owner from John Walker to Kern Sibbald
54 kes First non-working cut of vbackup
55 kes Correct FD heartbeat code to use volatile variable accessed by
57 kes Zero thread id with memset if on Win32 in case it is a struct.
58 kes If cannot create JobMedia record, continue to try to write eof
59 and clean up in block.c
61 kes Add code to interface OpenSSL to new Win32 pthreads code which
62 used a structure for thread_t.
64 ebl tweak bat for win32 compilation
66 ebl Remove tokyo cabinet from the source
67 ebl Update configure/autoconf to support berkeley DB
68 ebl Add a sort to db_get_file_list() to improve bsr construction time.
70 kes Add a mtx-changer.conf file that is not overwritten during
71 an upgrade. It fully configures the mtx-changer script.
72 kes Clear in-use bit on vol when unused while swapping.
74 kes Remove sleep at end of ./bacula
75 kes Clear hash packet for hardlinked files correctly. This corrects
76 a long standing bug where hardlinked files selected individually
77 would occasionally not be restored.
79 kes Apply Eric's patch to ensure that autoprune does not return
80 a Volume not in the autochanger unless requested to do so.
81 kes Correct bat restore display of multiple drives. This fixes
83 kes Do find_a_volume() each time an unload is done. This
84 fixes the failure of maxvol2-test.
86 kes Add some SD debug code.
87 kes Do find_a_volume() each time an unload is done.
88 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
89 and adds --with-db-port to ./configure.
90 kes Use Qmsg() in job.c watchdog callback.
92 kes Release main control rwlock if ABORTing.
93 kes Make watchdog connect timeout queue messages rather than sending
94 directly to avoid lock conflicts with the real thread.
95 kes Add const char in dbd.c to avoid compiler warnings.
96 kes Fix python compiler string warning. Note, IMO the GNU C++
97 compiler guys have made a *very* bad change to their compiler.
98 They now force all strings to be 'const' unless you explicitly
99 cast them, which is extremely ugly and ruins nice code as well
100 as creates a lot of useless work.
102 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
103 mt. This fixes bug #1116.
104 kes Add const in python files to reduce compiler warnings.
105 This may have to be backed out because of later compiler
107 kes Fix failure of 2drive-concurrent-test. Always read label;
108 clear_unload() only after drive is defined in acquire_for_read().
110 kes Generally clean up the manual tape loading code. The main
111 conceptual change is that when a volume is marked to be unloaded,
112 its volume name is retained, and it is only marked as unloaded
113 when either the autoloader says it is unloaded or another tape
114 is read on that drive.
116 kes Add debug code and refactor subroutine in stored/mount.c
117 kes Fix format problem in bscan output reported in bug #1105.
118 ebl Fix get_next_volume_for_append logic with autochanger
119 - use pruned volumes if found
120 - don't reset the inchanger flag after getting a recycled volume
122 Fix recycle_oldest_purged_volume to take InChanger flag in account
124 ebl Add mmap/unmmap implementation for tokyodbm under win32
126 kes Make first step toward eliminating globals from config
127 scanning. Also should be a workaround for FORTIFY_SOURCE
128 GNU C bug -- fixes bug #1042.
130 kes Apply duplicate job tests to restarted jobs.
131 kes Copy more data when restarting a job so that run
132 overrides are kept. This should fix bug #1094.
134 kes More word alignment cleanup.
135 kes Fix bug where SD did not ask operator if the device could not
136 be opened. Reported by Eric.
138 kes Add dbuser to DIR conf file (replaces user).
139 kes Add --with-db-password to ./configure
140 kes Fix regress to handle db_password.
141 ebl Add new "status storage slots" that list autochanger
143 ebl Update vtape driver to compile only under Linux.
144 ebl Fix a bug when restoring with a wrong mediatype.
146 kes Eliminate ints from conf files and structures to avoid
147 word alignment problems
149 kes Fix bug reported by Scott Barninger where the bacula script
150 refers to scripts in the wrong directory. Needed to meet the
151 requirements of recent FHS location changes.
152 ebl Disable vtape for FreeBSD.
154 ebl Modify disk-changer to check if slot contains something before
157 ebl Fix vtape on win32 and debian.
158 ebl Fix autoselect patch (cause segfault).
160 ebl Fix autoselect option broken for a while. Fix #1089. Need some
161 work with StorageId to be able to use a particular drive in a
164 ebl Rename vtape to vtape.
165 ebl Update vtape driver.
167 ebl Modify vtape driver to avoid sparse file.
168 kes Add make clean of qt-source directory during ./configure
169 kes Store last block number written to tape in DEVICE and
170 use it for testing for correct last block on EOT.
172 Release Version 2.4.0:
176 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
177 This fixes bug #1095.
179 kes Add create_postgresql_database.sql to Win32 installer. Should
180 fix problem reported by Juilio Monteiro.
181 kes Get correct slot when auto unloading a device. This fixes bug
184 kes Fix multiple media restore.
185 kes Make DEVICE Slot private and access it via a method.
186 Allows better control over when it is set and cleared.
187 kes Fix possible seg fault if SQL error.
189 kes Add Martin's fixes to argument scanning for the estimate
190 command. This fixes bug #1093.
191 kes Add debug code to SD.
192 kes Fix renaming a Volume, which used the wrong Volume name.
194 kes If operator has rewind tape, print warning, release tape and
195 try once more. If tape is positioned somewhere, something went
196 wrong, so mark the tape in error and try once more. Previously
197 this error was fatal, now it produces an error message.
198 kes Ensure correct volume name displayed during restore
199 kes Ensure that Volume is mounted for restore.
201 kes Fix a few more Coverity reported problems.
203 kes Apply Allan Black's status dir job count patch.
204 ebl Add information about IMPORT/EXPORT slots in mtx-script.
205 kes Enhance a couple of SD debug messages.
206 kes Tweak unload flag setting and ensure it is set during swap.
208 ebl Fix #1091 about bad output in estimate command.
210 kes Modify autochanger locking to attempt to avoid race
212 kes Make sure device not busy before doing label command.
213 kes Display open() errors except when polling. Previously too
214 many were suppressed. This should fix bug #1070.
215 kes Fix Win32 reparse points. Bacula will not recurse into any
216 reparse point directory, including mount points, unless the
217 directory is explicitly mentioned at the top level (same as
218 with Unix). A file that is linked to another file will be
219 backed up -- much as Unix does for hardlinked files.
220 This fixes bug #1041.
222 kes Remove double quotes from ChangeLog and ReleaseNotes
223 kes Remove StorageId test when pruning and recycling (Eric's changes).
224 kes Remove old form of locking when getting volumes -- causes deadlock.
225 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
226 the name unique and to eliminate compile time error.
227 kes Add accurate.o to Win32 FD Makefile
229 kes Fix cats dll build on Win32 after db_update_job_end_record
230 calling sequence change.
231 ebl Switch to tokyo dbm instead of htable in accurate code
232 ebl Include tokyo dbm to bacula source tree
234 kes Fix buffer overruns detected by Coverity.
236 kes Tweak joblog display.
238 kes Implement --without-qwt
239 kes Fix layout of restore tree dialog
240 kes Add configure bat QWT libraries, so that bat can be built
241 with or without the QWT libaries.
243 ebl Add dummy tape driver for regression tests.
244 kes Make sure we unload the right slot when swapping.
246 kes Add debug times, reduce size of two-pool-changer test
248 ebl Tweak autoconf scripts for vtape
250 kes Improve SD reserve debug code.
251 kes Testing an improvement to free up volumes no longer in use.
253 kes Rework SD acquire for read to handle autochanger Volume
255 kes Implement regression that explicitly tests swapping a Volume
256 from one drive to another.
257 kes Enhance disk-changer to detect most error conditions.
258 kes Fix SD code so that it properly swaps a Volume between drives.
259 This fixes bug #1083.
261 kes Apply libdbi patch from Joao Freitas for regress and for
262 Bacula trunk. Regress now works with libdbi. Nice.
263 kes Apply .nobackup patch from bug #1077 submitted by
265 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
266 name into jobs cloned via the run directive.
268 kes Prevent a Volume that is being swapped from being freed from
269 the volume list. This will most likely fix, at least partially,
271 kes Fix strippath so that it does not get a buffer overrun and crash FD.
272 This fixes bug #1078.
273 kes Remove 50 millisec wait in SD that broke debugger.
274 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
275 that a job may run, counted from when the job was scheduled.
276 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
277 a job may block waiting for a resource, counted from when the job starts
278 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
279 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
280 that implements multiple commands per line in the console when using
281 readline. Modify the default to use a semicolon as the command separator.
283 ebl Fix SQL query in migration code.
284 ebl Make accurate mode with hash disk pass regression tests
286 ebl Implement first cut of accurate backup with hash disk.
288 kes Force unload of volume when wrong volume mounted in SD.
290 kes Fix bat seg fault at termination.
291 kes Add Bacula generated version to bat about box.
294 kes Experiment with allowing multiple read jobs.
295 kes Move final volume swapping code to DCR method and
296 call it from acquire_for_read().
297 kes When wrong volume is mounted during read, unload_autochanger.
299 kes Integrate the libdbi changes from Joao Henrique Freitas
301 kes Stop searching for Volumes in SD askdir if DIR returns the
302 same volume name twice in a row.
303 kes Close bat console windows first to eliminate error message
306 kes Tweak the swap Volume from one drive to another code so that
307 it now seems to work.
308 kes Resolve several problems with recycling that broke the new
309 code (these problems are in 2.2.9 as well).
310 kes Remove the volume lock when calling the sysop code.
311 kes Don't mark a reserved volume with no writers as unused otherwise
314 kes Rework class structures for VOLRES, DCR, and DEVICE to make
315 the method names a bit more logical, and for more logically
316 handling the responsibilities.
318 kes Remove redundant code in terminating the scheduler that just
319 causes a seg fault in many cases.
320 kes Cleanup releasing a volume and make it a DCR method.
321 kes Improve algorithm for detecting pre-reserved volume and
324 kes Tweak volume swapping code so it works.
325 kes Correct name overloading in mount.c
326 kes Replace released flag in VOLRES with reserved and add access
327 methods for the VOLRES class.
328 kes Prevent volume from being released while being swapped.
329 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
331 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
333 kes Refactor parts of stored/mount.c
335 ebl Add sanity checks for VolWriteTime and VolReadTime
336 ebl Take care of bad clock changes while computing VolWriteTime
337 and VolReadTime. This should fix or limit #1066
338 kes Correct error string numbers in dird/catreq.c
339 kes Restructure reserving, acquiring, and mounting volumes. Calls to
340 autochanger are deferred for mount.c -- simplifes the code.
342 kes Do not prune any running job. It just fails the job.
343 kes Lock the volumes when changing dev->reserved_device and marking
344 the volume unused otherwise the device can get reserved by
345 another job before the volume is released, thus blocking it.
347 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
348 kes Fix bug #1063, reuse of freed ptr in list nextvol.
349 kes Release regex compile buffer in filed/job.c
350 kes Add proper type of const char in sql_create.c
351 kes Turn off debug in daemon termination routines
352 kes Move free_volume_list() before devices are freed in stored.c
353 kes Fix reference to uninitalized stack variables in bregex.c.
354 This should correct bug #1067.
356 kes Fix possible seg fault in SD when freeing a volume entry.
358 kes Implement unload_dev() before swap device.
359 ebl Add statistics prunning with option and menu
360 kes Separate unload_dev() from unload_other_device() in autochanger.c
362 kes Apply patch from bug #1069 that corrects spurious error messages
363 when ACLs enabled on SGI but no ACL exists.
364 ebl Fix small segfault in bacula-sd when debug level is 500
365 kes Modify run_program() and run_program_full_output() to use
366 call by reference for the results string. This corrects a long
367 standing problem where the address of the string may be changed
368 in the subroutine but not in the calling program.
370 kes Re-enable code to remember last volume mounted on a non-tape
372 kes Add patch supplied in bug #1068 that fixes a SD crash when using
373 a Virtual autochanger.
374 kes Generate correct JobMedia records during spooling/despooling when
375 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
376 <tih@hamartun.priv.no> for excellent analysis and testing.
378 kes Tweak hash algorithm for htable using Martin Simmons idea
379 for doing a circular shift.
380 kes Remember what volume is in VTLs (previously turned off for
382 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
383 pointed out some problems in creating JobMedia records during
384 spooling with concurrent jobs. Fix the problem by updating the
385 start file position before despooling and generate a jobmedia
386 record at the end of despooling.
388 kes Fix handling of JobMedia records during spooling and when a
389 Volume is changed without actually writing data to the Volume.
391 kes Rework certain SD locking based on gdb tracebacks of deadlocks
392 sent by Eric. This code now uses only the volume_lock() rather
393 than the reservations lock when at EOM and acquiring a new
395 kes Ensure only one exit point in several subroutines.
397 kes Implement bsock code to permit locking. Use the new code in Verify
398 in the FD to prevent the heartbeat thread from disrupting the Verify
399 data sent to the Dir.
400 kes Modify SD locking to eliminate locking the reservations system from
401 outside the system. Use the volume lock when getting media data
402 and reserving a new volume at end of media.
403 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
404 when SD starts are not locked into place.
406 kes Fix error compiling runscript code on 64 bit machines.
407 kes Tweak Win32 mount point code.
408 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
409 cleared giving bad file estimate).
410 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
413 kes Keep Schedule run lists in order as suggested by
416 kes Implement autostart scripts for Debian.
417 ebl Implement upgrade catalog scripts.
419 ebl Apply jobstat patch for long term statistics. Have to implement
420 purge stats command and upgrade scripts.
421 kes Fix mtx-changer.in for broken Debian mt program.
423 kes Fix large number of JobMedia records reported by Eric Bollengier.
425 kes Apply doc fix from bug #1062.
426 kes Resolve crash and improper restore wx-console Win32 restore
427 GUI. Fixes bug #1065.
428 kes Update Win32 wxWidgets to latest version.
429 kes Attempt to do correct handling of Win32 mount points. Should
431 kes Fix Win32 FD backup/restore memory leak due to improper termination
432 of BackupRead/Write. This fixes bug# 1038.
434 ebl Reduce memory usage for accurate backup, working only with ctime
435 and mtime. (not all Lstat field)
436 About 40MB for my Linux system (400.000 files)
438 kes Add dcr->reserved_volume flag that allows us to release a volume
439 even if it is not vol->released. This allows maxvol2 to work when
440 Volumes expire and we are already writing to the device (i.e. a
441 volume is pulled out from under us by another job terminating after
442 we reserve the drive).
444 ebl Permit multiple command/console per runscript definition.
445 RunScript { command = /bin/true ; command = /bin/false ... }
446 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
447 (restart an application) just after the VSS snapshot on windows.
448 kes Don't zap dcr values during release_volume() as they might
449 have the next Volume to be mounted.
450 kes Fix AIX prototype.
452 kes Second cut of drive switching during backup.
455 kes Update Win32 version of wxWidgets to most recent version.
456 kes Tweak Copy job details.
457 kes Rework dir_find_next_appendable_volume to make a bit more effort
458 to find a suitable volume before giving up.
460 kes Make ask_sysop_to_create... to return if waken from wait.
461 This helps get out of blocked conditions.
462 kes Experimental implementation of switch_device in reservations.
463 kes Implement FD version to allow easier protocol changes.
464 kes Add Plugin Options string -- not yet passed to FD.
465 kes Implement PluginOptions ACL.
467 kes Attempt to correct problems with restores with autochangers and
468 use counts going negative
469 kes Rework SD status command and implement API for bat. Implements
470 header, runing waitreservation, devices, volumes, spooling,
471 and terminated status keywords.
472 .status storage=xxx <keyword>
473 kes Clarify TLS error message by adding double quotes around name.
474 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
475 kes Pass jcr to tls routines so debug messages can be handled better.
476 kes Rework jobq resource allocation code, and possibly fix a bug
477 that caused reference counts to get out of sync.
479 kes Rename fd/dir plugin to use Bacula standard underscore.
480 kes Plugin work -- bring dir up to fd level.
481 kes Start implementation of VTL code
482 kes Fix Win32 build after adding new cats subroutine.
484 kes First cut at Duplicate Job implementation.
486 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
487 kes Start PluginOptions string, and refactor a bit of ua_run.c
488 ebl Apply Allan patch that permit to reset recyclepool.
490 kes Test patch -- possible fix or improvement for bug #1053
491 kes Refactor FD and SD status commands to permit new API code in
492 SD, and to fix Win32 build.
493 kes Win32 build is now working.
495 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
496 some ideas in patch from Scott Bailey.
497 kes Begin implementation of duplicate Job control.
498 kes Fix some of Win32 build after recent additions.
499 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
500 which causes the FD to detect whether or not the OS has the
501 honor no dump bit (*BSD systems), and if so, to skip backing up
502 any file with this bit set. The feature is enabled by setting
503 'honor no dump flag = yes' in the Options section of a FileSet.
505 kes Correct po warning message with datarootdir
506 kes Implement more code in dird.c to put configuration parsing in
507 a class rather than use globals.
508 kes Restructure SD status command for implementation of bat API
511 kes Suppress incorrect 'Will not descend from x into y' messages.
512 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
513 daemon globals used by parser.
514 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
516 kes Fix free of plugin_list when none exists.
518 ebl Apply accurate project patch.
520 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
521 on non-mempool object)
522 kes First cut of converting FD .status to work with bat API.
524 .status client=XXX header
525 .status client=XXX running
526 .status client=XXX terminated
527 kes Implement first cut of Copy Job.
528 kes Implement Catalog in Pool resource. It overrides catalog specified
529 in the Client resource.
531 kes Apply patch (with some difficulties) from Joao Henrique Freitas
532 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
534 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
535 ftruncate() actually works. In the case of some (cheap) NAS devices,
536 it does not, and so recycling NAS Volumes does not work. The code
537 simply unlink()s the file, then recreates it. This fixes bug #1011.
539 kes First incomplete cut of big malloc blocks for htable.
540 kes Tweak plugin code.
542 kes Plugin debug code + tweak a couple bat dialog layouts
544 kes Fix creating first JobMedia record during Migration to include
545 proper index. This caused slow restores of migrated jobs.
546 kes Temp fix to plugin name file_index.
547 kes Bacula backed up and restored a MySQL database.
549 kes Implement plugin restore.
550 kes Implement parsing of db_driver to give db_type index.
552 kes First cut of plugin restore code.
553 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
554 and do not strip paths on symbolic links.
555 kes Set catalog backup database and user name from values specified on
556 the ./configure line.
557 ebl Fix #1031 about wrong pool source information in job report.
560 kes Remove a redundant jcr argument to find_files, match_files, and
562 kes Implement '.status dir header|scheduled|running|terminated' that
563 prints the requested status section. With the exception of the
564 header, the other reports have fields separated by tabs (\t).
566 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
567 a resource embedded run command to find a since time if no explicit
568 since time was supplied on the command line.
569 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
570 that updates the state file at job termination time in addition to
571 when the daemon terminates.
573 kes First version where a plugin did a backup.
574 bpipe-fd.so created a backup file, wrote a test
575 string to it, and Bacua could restore this fabricated file.
577 kes Implement DB Driver = string for the DBI driver.
578 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
579 kes First cut of code for loading Win32 plugin dlls. Implement
580 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
581 and implement a dlfcn.h file based on opengroup's definitions of
584 kes First cut plugin directives.
586 kes Apply patch from bug #1049 to prevent stripping the path on a
588 kes Attempt to fix bug #1047 where stripping a path corrupts the
589 heap. Waiting for feedback.
590 kes Correct the Mount message not to suggest labeling a new tape
591 when doing a restore. Submitted by email by John Stoffel.
592 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
593 FD by using casting. Reported in bug #1042.
595 kes A bit of crypto cleanup. More later.
597 Release Version 2.2.8
599 kes Apply patch from Martin to correct bug #1040, bscan sets existing
601 kes Fixed important spelling error in doc -- bug #1045.
603 ebl Fix bextract to be able to extract non-portable Win32 data to
605 kes Move initialization of read/write res lock earlier in the code.
606 This fixes the crash with a null conf file. This fixes bug
608 kes Redefine CURES in lib/parse_conf to be URES and move it all
609 into lib/parse_conf.c -- this responds to bug #1042, but does
610 not fix it. The fix is not to compile with FORTIFY_SOURCE.
611 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
612 the trunk SVN. I don't think this was reported as a bug.
614 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
616 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
618 kes Add DataDespooling and DataCommitting status (committing is
619 the last despooling).
620 kes Finish implementation of new reservations code noted below.
622 kes Fix bsnprintf for float point numbers. I broke recently when
623 parameterizing some variables. This fixes bug #1036.
624 kes Undo recent reservations changes ... will apply them later
625 when they work better.
627 ebl Fixes #1034 which cause mysql to hang the connection after 8h
628 ebl Change default statistics target of filename.name and path.path
629 fields for PostgreSQL. This speeds lookup by indexes. Thanks
631 kes A few more tweaks to new reservation code. Make sure to clear
632 vol released flag when retaking volume. When reading label and
633 label is bad mark volume unused. When recycling, mark volume
634 unused so it can be renamed.
636 kes Fix reserve_volume() so it doesn't release a volume in use
637 (i.e. a volume entry not marked released). This should be
638 the last part needed to fix bug #1018.
640 kes Move Heartbeat documentation from Job to Director resource.
641 This fixes bug #1033.
643 kes Fix existing switch drive SD code to call autochanger to release
644 any old volume. This must be done to keep the autochanger from
645 releasing subsequently newly reserved volumes in doing a close().
646 This should fix bug #1018.
647 kes Fail if attempting to get console input in batch mode. This
648 should help fail RunScript console commands that are incomplete.
649 kes First cut implementing switch_drive() in SD (not actually called).
651 kes Implement first cut running console commands in a RunScript.
653 ebl Fixes bug #1028 where 'Selection Type' option was not usable
655 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
658 Release Version 2.2.7
660 kes Add new free_tls() entry point so that Win32 builds.
661 kes Fix compile warning in src/lib/util.c
662 kes Fix entry point for edit_job_codes() so that Win32 builds.
663 kes Fix seg fault Frank Sweetser reports in regression testing
664 on his systems. The problem was that the original author of
665 bsnprintf.c did not take into account the side effects of
666 using ++x in the argument to a #define.
667 kes Make SD protocol backward compatible with version 2.2.x.
669 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
670 because Bacula no longer restores sockets.
671 ebl Always use ignorecase fileset option on win32 FD.
673 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
674 that implements double quoting include names in conf files,
675 and also allows piping input by having the first character
676 be a vertical bar (|).
677 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
678 that implement %f in RunScripts to pass the FileSet name.
679 kes Skip leading | when lex input comes from a pipe as suggested
680 by Michael Stapelberg <michael@stapelberg.de>.
682 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
683 Nerijus Baliunas <nerijus@users.sourceforge.net>
685 kes Implement Plugin Directory and plugin events.
687 kes Implement a security enhancement: TLS authentication but no
688 encryption. Enabled by setting 'TLS Authentication = yes'.
689 Note when this is on, TLS encryption is turned OFF!
691 kes This patch corrects a problem where the maximum concurrent storage
692 jobs counter gets out of sync during restore jobs causing jobs to
693 'wait on max Storage jobs'. This patch fixes bug #1009.
695 kes This patch fixes bcopy so that it produces correct Volumes.
697 kes This patch eliminates spurious output to the console during a VerifyVolume
698 job that contains encrypted data. It fixes bug #1024.
700 kes This patch prevents the 'status dir' command from trying to use a scratch
701 volume and possibly moving it from one pool to another. This patch fixes
704 kes Add new include to postgresql.c suggested by Marc Cousins so
705 that it compiles correctly with pgre version 8.3.
707 kes Fix --archivedir addition to configure. Replace it with
708 --with-archivedir in configure.in This fixes the regression
710 kes This patch fixes bug #1012 where the job is canceled because
711 of Max Run Time exceeded when the job has not yet started.
713 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
714 one 'part' to write. Instead of each part being stored on disk,
715 written to DVD, then deleted from disk, all parts are written to disk,
716 and only the last is written and deleted from disk.
717 kes This patch fixes the status command to include the formating string for
718 JS_AttrInsterting. It fixes bug #1021.
719 kes This patch should fix the Mac OS X build problem on the latest
720 Darwin, where sys/types.h was not included correctly (apparently
721 due to a change in the Mac headers). The solution was to explicitly
722 ensure that it is defined for the ./configure.
723 This patch also has a rebuild of configure that includes the Debian
724 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
725 kes This patch should ensure that queued messages to the console are
726 displayed as soon as possible. It should fix bug 1007, but has been
727 reported not to work.
729 kes This patch fixes the infinite loop when trying to increase the
730 maximum number of volumes in a Pool during the add command.
731 This patch fixes bug #1008.
733 Release Version 2.2.6
735 db Remove extra data on estimate command in joblist for bat.
737 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
738 really change anything, but is the beginning of doing it *right*.
739 To do it completely right the LastWritten date must be passed to
740 the SD, but it is not yet done.
741 kes Minor tweaks to some bat restore SQL.
742 kes This patch fixes bug #1003 where putting the message output from
743 a Verify job into the catalog results in a recursive loop. The problem
744 seems to show up only with postgresql (to be verified).
745 kes Correct %x to %p in postgresql debug statement.
747 kes Fix bug #942 where lots of emails where generated when the heartbeat
748 interval was low and Bacula wanted a different tape from the one in
751 ebl Add new SD despooling attributes and Dir inserting attributes
752 job status codes in the catalog (Status table).
754 ebl Use qmake-qt4 instead of qmake when available (debian system).
756 kes Add a security warning to src/cats/make_catalog_backup.in indicating
757 that passing the password via the command line (arg 3) is insecure.
758 This responds to bug #990 (it doesn't fix it).
760 kes Set default debug_level to zero. This corrects bugs #991 and #993.
761 kes Fix a crash in bat when it cannot connect to the Director for example
762 if the Director is not running.
763 kes Remove redundant INDEX (JobId) from File table in the trunk.
765 kes Make explicit exception to GPL in LICENSE to permit linking
766 the Win32 FD with Microsoft VSS code.
767 kes Apply the Solaris package patch from
768 Masopust, Christian <christian.masopust@siemens.com>
769 kes Apply the patch to optionally add a timestamp in the debug output
770 submitted by Mariusz Czulada <manieq@wp.eu>.
772 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
773 backend (sql_strerror). Fixes bug #989
775 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
776 It applied with no problems.
777 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
779 kes Redirect stderror to stdin on mt status command in mtx-changer.in
780 since the status is returned on stderr on Solaris.
781 kes Activate Close button on tray-monitor window. This fixes
783 kes Check for NULL item in parse_conf.c before calling it. In the
784 case of Device, there is no item and this caused a seg fault when
785 Device appears in the conf file.
786 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
787 avoids pulling in config.h multiple times in some new code.
789 kes Fix spurious warning message printed when creating a volume with
790 a LabelFormat. This fixes bug #976.
792 Release Version 2.2.5
794 kes Add JobId in place of Job name in all the Jmsg() output.
795 kes Correct the APP_DESC for the Win32 storage service (remove an e).
797 kes Make maxvol-test and new more strict maxvol2-test work.
798 kes Print JobId in all Jmsg() job output.
800 kes Add new SD despooling attributes and Dir inserting attributes
801 job status codes. This fixes bug 961.
802 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
804 kes Fix doc issue. This fixes bug #963.
805 kes Fix listing performance problems in bat. Pointed out by
807 kes Remove old debug code.
808 kes Fix bat code that tests for Win32. This should fix bug #968
809 kes Query 5 list wrong Vol after migration. This fixes bug #960
811 ebl Fix #969 where user can't change Replace option in restore menu.
813 kes Save jcr in thread specific data (tsd) for each thread.
814 kes Make Dmsg() print JobId as -%u.
815 kes Make Jmsg, Emsg, and others automatically pickup the jobid
816 for the thread if it exists.
817 kes Remove old reservation debug jid code.
818 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
819 ebl Add an option that permit to specify spool size in job
820 definition. (Applying patches/testing/spoolsize_per_job.patch).
821 You must upgrade SD and DIR at the same time.
822 dvl Add new configuration item --archivedir
823 dvl Adjust regression tests to use tmp not /tmp. This will allow
824 multiple concurrent runs of the regression tests.
826 kes Fix race condition that drops final block written to volume.
827 This happens in rare cases with multiple simultaneous jobs
828 when the Volume fills. This fixes bug #964. May be related
829 to bug #935 and possibly #903.
830 kes Eliminate more strerror() and replace with bstrerror().
831 kes Remove BSD getopt and replace with unrestricted IBM version.
832 kes Fix Win32 build for changed calling sequences.
833 kes More tweaks to the mount volume routines to get everything
834 right. Changed variable name from find to have_vol, which is
835 much easier to understand.
836 kes Enhance btimer debug code.
838 kes Fix FD->SD authorization failure, which was due to spurious
839 wakeups from a pthread_cond_timedwait(). Simply check the
840 predicate before continuing. This fixes bug #953.
841 kes Add const char where needed (more to do). Remove temp debug code.
843 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
844 kes Don't overwrite error message in check_tables_version.
846 kes Unlock batch insert tables with same calls used elsewhere.
847 kes Allow starting 59 jobs a second.
848 kes Make SD session key more random.
849 kes Add retry for SQLite opening db if it fails. Probably helps
851 kes Suppress extra error messages during batch insert failure.
853 kes Add jcr to timer packets so if killed message can be sent to job.
854 kes Add JobId to all Dmsg() output.
855 kes Put some FD auth code on dbglvl rather than fixed.
856 kes Return insert attributes error message in db msg buffer to avoid
857 false error messages. Helps fix bug #966.
858 kes Separate batch init error messages. Probably helps fix bug #966.
859 kes Make SD code that contructs attribute insert check string lengths
861 kes If Dir gets an error during inserting attributes, cancel SD.
862 This reduces unnecessary error messages.
864 kes Correct search boolean for getting Volume info
865 ebl Cleanup batch insert code. Probably fixes bug #965.
866 kes Back out one small change to the reservation system (reserving a volume).
867 kes Rework how a Volume is mounted. It is now much more intelligent and
868 will always attempt to use any mounted volume if possible and reduces
869 calls to the Director asking about volumes.
871 kes Turn off some code when batch insert not enabled.
872 kes Edit FD name in connect error messages.
873 kes Rework the reservation system to take into account that the Director
874 might give us a Volume that is different from the current one being
875 used, and to ensure that we don't exceed Maximum Volume Jobs.
876 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
877 fatal error with multiple jobs running'
878 kes Add more debug code in reservation system.
879 kes Implement maxvol-test to check bug #947.
881 kes Add code to handle tray monitor separated from Win32 FD.
882 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
884 kes Add missed return in fixing verify bug -- trunk only.
885 ebl Fix a command parser issue causing a director segfault.
886 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
888 kes Increase the max block size to 4MB fixes bug #957.
889 kes ERABT if user sets min block size > max block size. Fixes bug #956.
890 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
891 is not properly mounted (recognized) during a poll.
892 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
893 Job that has differences reports Verify OK.
894 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
896 ebl Add an option to operate on all pools with update vol parameters.
897 This complete the project 20. Patch from Nigel Stepp.
898 ebl Add history support to bconsole when using readline.
899 Using Ctrl-D to exit doesn't update .bconsole_history
900 kes Modify new volume algorithm to use max MediaId for generating next
901 volume number rather than the count of Volumes. This should essentially
902 eliminate the failure rate if some volumes were deleted. Bug #921.
903 kes Begin implemention of Optimize Job Scheduling.
904 kes Implement restore callback that Dirk and I agreed on for bat
905 restore. This fixes bug #928. Restore of backup of zero files fails.
906 kes Fix SQL Catalog logging which broke with new db_escape_string
909 Release Version 2.2.4
911 kes Fix bacula_cats.def for new db_escape_string().
912 kes Increase size of name string when FD making connection to SD.
913 May fix bug #953. FD->SD connection failure.
915 kes Add code to help Dan debug 2drive-incremental-2disk test.
916 kes Add code to try to fix bug #908.
917 kes Add waits to multiple exit detection code to try to force pid
918 file to always be deleted.
919 kes Restore good dev.tar.gz to rescue set appropriate binary property.
921 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
922 trying to switch drives by checking for blocking before unblocking.
924 kes Cancel storage daemon in all cases where FD reports error. This
925 should fix virtually all cases of bug #920.
926 kes Fix db_escape_string() for MySQL which did not compile.
928 kes Fix error message that was clobbered when Dir tells SD it does not
929 have write permission on Volume. This should fix a minor point
930 in bug #942, but not the main problem.
931 kes Add code to cancel job in SD if FD connection fails. This should
933 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
934 dvl Pass jcr and db into db_escape_string() to enable better escaping
936 kes Fix migration code to get correct Volume name with multiple volumes
937 by skipping |. Fixes bug #936.
938 kes Implement patch supplied by Landon to fix bug #944 where using
939 TLS with bconsole uses 99+% of the CPU.
940 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
942 kes Move patches into patches directory.
944 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
947 ebl Using 'm' in bconsole will show messages like before,
948 and not memory usage.
949 kes Fix bug #935, and probably also bug #903 where files were not
950 restored. MediaId was not properly set in JobMedia record after
953 kes Suppress chown and chmod error messages if the FD is not running
956 kes Apply Martin Simmons' patch that should turn off the new API usage
957 when batch insert is turned off allowing building on older
959 kes Add ./configure search in qwt-qt4 for qwt package
961 kes Bacula is now free of 3rd party GPL copyrighted code!
963 kes Add guid_to_name.c/h which replace idcache.
964 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
966 ebl Detect if new PosgreSQL batch insert API is present.
967 kes Correct incorrect mempool call causing Director crash. Occurs on
968 systems without va_copy().
969 sb Update spec files for 2.2.1 release
971 kes Fix memory pool call in ua_output.c. bug #934.
972 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
973 Add test program to fnmatch.c
975 kes Integrate patch to README.vc8 from
976 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
977 edit it to get it into Unix patch format.
978 kes Implement mkpath.c to replace old FSF makepath.c
980 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
982 Release Version 2.2.1
984 kes Update POTFILES.in
985 kes Cleanup a few underquoted AC_DEFUNs in configure
986 kes Apply patch from Martin Simmons that adds a test for va_copy to
989 kes Fix bug #921 by increasing the number of tries to create a new volume
991 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
992 can be called multiple times. Implement a version for machines
993 without va_copy() that gets a big buffer.
995 kes Integrate more portable zone offset code into bsmtp.c
996 Submitted by Attila Fülöp.
998 kes Fix bad SD->FD return status reported by
999 (James Harper) <james.harper@bendigoit.com.au>
1000 ebl Fix a bug in read_close_session which return random status
1001 thanks to James Harper
1003 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1004 and directory names during restore of single file/directories.
1005 kes Add sanity checks to .sql command when string is empty. Hopefully
1006 that will resolve Dirks Director crash.
1008 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1009 in the bsmtp chat subroutine when debug is >= 10.
1011 kes Fix Director crash when running bat SQL queries.
1012 kes Add David's notes on Item 8: Copy pools.
1014 kes Rework projects file to be current and ready for a vote.
1015 kes Enhance lex scanner error message.
1017 kes Tweak LICENSE file to mention BSD code.
1018 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1019 if specified on the ./configure.
1020 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1021 This class is intended to allow us to open a second bsock to the
1022 Director while in the restore subdialog.
1024 kes Fix configure to create bat Makefile before creating dependencies.
1025 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1026 kes Add a tooltip to the tray monitor.
1027 dvl Set the Director's PID file before dropping privs. This fixes
1030 kes Update AUTHORs file
1031 kes Increase the default max concurrent jobs to 20 in FD and SD to
1032 correspond with the default .conf files.
1033 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1034 some different, of the same file created by RN when porting the
1036 kes Rearrange some of the Win32 directories and the placement of the files
1038 kes Set DEVELOPER flag in version.h
1040 ========================================================================
1041 Release Version 2.2.0
1043 kes Apply a second doc patch from Marc.
1044 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1045 improves the tips section that discusses how to setup multiple
1048 kes Update bat README file.
1049 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1050 corrects a typo in the Recycle status check in db_find_next_volume().
1051 This will probably fix a number of annoying problems with multiple
1053 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1054 bnet calls -- no functionality change.
1056 kes Modify the Verify output to specify if files are missing on
1057 the Volume(s) or disk. Fixes confusion in bug #916.
1058 kes When more than one Volume is read in a migration job, the last
1059 Volume bytes reported are from the last read volume rather than
1060 the last written volume. Fixed. This fixes bug #910.
1061 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1062 It previously printed New Recyle flag is: no. This fixes bug
1065 kes Correct seg fault when switching tape drives during restore.
1066 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1067 be used until after 2.2.0 release.
1069 kes Remove fnmatch() in SD that permitted wild card specifications.
1070 This fixes bug #914.
1072 kes Fix %g in filename returned by SQL for browse tree reported by
1074 kes Fix configure so that it puts config.out in the cwd rather than
1076 kes Attempt to fix the locking problem reported by Eric in bug #906.
1077 kes Make berrno class to leave errno unchanged after constructor call.
1078 kes Make bnet_server use the heap rather than the stack to allocate
1079 its socket fd pointers to avoid a crash at termination. Problem
1080 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1082 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1083 and putting it in depkgs-qt along with Qt4.3.
1085 kes Rework code in acquire.c that switches drives for reading when
1086 the Media Type does not match. This should fix bug #906
1088 ebl Fix a director segfault during job setup #907
1089 kes Correct seg fault in postgresql when first operation returns no
1090 rows. Fixes Dirks File browser problem seg fault with bat.
1092 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1093 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1096 kes Implement PopUp YES/NO dialog for bat.
1098 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1100 kes Correct RunScript to terminate job in FD on failure.
1101 kes Change abort_on_error and AbortJobOnError to fail_on_error
1102 and FailJobOnError in RunScripts.
1103 kes Minor tweaks of code formating in RunScripts, principally to
1104 avoid depassing 80 columns.
1106 kes Eliminate one #ifdef Win32 in bsmtp
1107 kes Implement grow tool to grow a file for testing very large databases.
1108 kes Add big-vol-test to test Bacula seeking with > 5GB.
1111 kes Modify find_next_volume() to return all values in Media record.
1112 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1116 kes Update Release notes
1118 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1119 Warning, in previous beta version, all media get from scratch keep their
1122 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1123 This should fix bug #842. Made a note to look at removing the temp
1124 files at the end of the install.
1125 kes Add ability to mount and unmount a file device providing it is
1126 marked as being removable and has the appropriate mount and unmount
1127 commands defined in the Device resource. This fixes bug #830.
1128 kes When applying a storage override, release all previous storage
1129 definitions rather than just prepending the new storage.
1130 This should prevent a good deal of confusion.
1132 kes Implement ./configure search for qwt libraries.
1134 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1135 Win32 FD. This should fix bug #893.
1136 kes Remove an unnecessary beep in Win32 init code.
1137 kes Update copyright dates in Win32 executable about boxes.
1138 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1139 code with a BSD getopt.c and getopt.h.
1140 kes Remove sched.h from the Win32 compat directory -- not used.
1141 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1142 need to shut it down, do it through the services panel or the command
1144 kes Remove some inappropriate Bacula FSFE copyrights.
1145 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1146 kes Fix regress config non-portable test as pointed out by
1147 Florian Heigl <florian.heigl@gmail.com>
1148 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1149 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1151 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1152 Reported by Frank Sweetser.
1156 kes Fix client-only build.
1157 kes Integrate client-only fixes for bsys (initgroups) and conio from
1158 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1159 kes Make arguments to get_scratch_volume() in same order as other
1161 kes Rework the prune_volumes() subroutine so that after purging and
1162 no volume found in desired pool, it will check for a scratch
1163 volume. This prevents recycling the whole scratch pool.
1164 kes Add code to status storage to print boffset_t (largefile support).
1166 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1167 kes You now need a --with-qwt=<dir> to be able to build bat.
1168 kes Update src/win32/cats/bacula_cats.def to include the new
1169 db_get_query_dbids() call on Win32.
1171 kes Correct a problem when selecting a scratch volume and moving
1172 it to another pool that lost some columns.
1173 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1174 kes Enhance Autochanger error messages to include Volume and device name.
1175 kes Rework prune_volumes() code to take account of InChanger flag,
1176 and to handle recycling volumes going to the Scratch pool and
1177 current pool because the RecyclePool directive.
1178 kes Implement a better and more efficient db_get_query_dbids() to
1179 handle creating and passing back a list of DBIds.
1183 kes Start work on new more efficient DBId subroutine. First use
1184 will be for recycling volume to Scratch inchanger.
1185 kes Increase number of JobIds in pruning from 1000 to 10000.
1186 This to be replaced by above routine.
1187 kes Begin implementation of building Qt4 on Win32.
1188 kes Correct typo in fix I added for bad TLS shutdown.
1189 kes Pull 2.0.3 patches into patches directory.
1190 kes Update Release notes. Include qt-console in line count.
1191 kes Update Projects file.
1193 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1194 bug in migration code where a job that spanned two volumes
1197 kes Implement new BST_DESPOOLING blocked state. Change from locking
1198 during despooling in SD to blocking. This means that other threads
1199 can work with the device structure, in particular the reservations
1200 system while despooling.
1202 kes Fix return in reservation message queue that missed clearing
1203 the jcr lock (implemented 26Jun07 below).
1204 kes Rename a number of dev methods to make locking function names
1206 kes Document locking in lock.c. Move lock structures to new file
1209 kes Move reservations message lock to lock jcr only this
1211 kes Move main SD locking code into lock.c (new file).
1212 kes Update Win32 build to include lock.c
1216 kes Dirk committed the qwt library code for drawing graphs in bat.
1217 kes Tweak install of qwt so that it is integrated with ./configure.
1219 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1220 out by Eric (my typo).
1221 ebl Fix configure.in to get batch mode enable
1222 kes Return correct string from authenticate.cpp in bat when connecting
1224 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1225 spurious line drops when using TLS.
1226 kes Do not file reparse points when restoring a file that already
1229 kes Implement Windows reparse points -- similar to directories, but
1230 we do not descend into it. This is a first cut. They seem to
1231 be backed up, but restore is not yet tested.
1232 kes Remove restore_blocking in tls code when shutting a socket to leave
1233 it in blocking mode. Hopefully this will fix the encryption bug
1234 reported by Frank Sweetser.
1235 kes When opening a file for backup, tell the OS that we are going to
1236 read it sequentially -- optimization.
1237 kes Change variable names in authenticate_director() to not conflict
1238 with member names in bat. Caused great confusion with compiler,
1241 kes Queue openssl error messages in case of comm problem.
1242 kes Do shutdown() call if socket terminated.
1243 kes Remove some duplicated code in tls.c
1244 kes Move more of the bsock member variables into private and access
1246 kes Add Frank Sweetser's tls-test to the regression suite.
1248 kes Add Swedish sv.po file
1250 kes Don't print clock skew message in FD if less than 3 seconds diff.
1251 kes Add a bit of VSS info to status client.
1252 kes Implement a first cut of Vista VSS, using Win2003 code.
1254 Release: 2.1.20 beta
1256 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1257 loaded tape but uses first drive).
1258 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1259 This was indeed a Win32 issue.
1261 kes Simplify search of autochanger for in-use Volume.
1262 kes Fix exit condition of check for in-use volume. kes Remove
1263 inappropriate my_postgresql_free_result() in db_close()
1265 kes Fix bad return in FD when encryption signature not found.
1266 Probably caused a crash.
1267 kes Inhibit missing encryption signature error messages for
1268 file types where no signature computed.
1269 kes Correct inverted check on autochanger in reservation system.
1270 kes Tweak debug code in autochanger reservation.
1272 kes Add some additional locking in the cats directory in subroutines
1273 that modify packet variables called from batch insert.
1274 kes Rework how dcrs are allocated. new_dcr() can now be called
1275 with an existing pointer, and it will simply clean it up.
1276 This allows the reservation system to test various different
1277 devices, and will permit easy device changes.
1278 kes A bunch of changes all over to handle new new_dcr() calling
1280 kes Work more on the Volume management in the SD. Remember Volumes
1281 for tape drives and for autochangers (even virtual disk changers).
1282 kes When looking at the Volume list to reserve a drive, handle
1283 autochanger names correctly by interating through the changer
1284 devices. Also call the Director to see if a Volume is suitable
1285 for the current job.
1286 kes Fix some bugs in bscan. Make sure all media records are written.
1287 Make sure that valid JobMedia records are written for disk files.
1288 Previously they were completely wrong.
1289 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1290 that the URLs don't change and so that the developers will all
1291 work off the same copy. Rebuild from scrach.
1292 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1294 Release: 2.1.18 beta
1296 kes Fix seg fault in FD from incorrect digest size.
1297 kes Fix argument to non-OpenSSL crypto.c subroutine.
1299 Release: 2.1.16 beta
1301 kes Remove a few malloc()s from the encryption code.
1302 kes Use the class calls to bsock in filed/backup.c and restore.c in
1303 place of the old bnet_xxx code.
1304 kes Implement code that does an on the fly calculation of the
1305 signing digest during restore of encrypted files. It makes
1306 a best guess at the algorithm, and if it is not correct, will
1307 then revert to the old code which reads the file after it is
1309 kes Implement at least one missing crypto stream in stream_to_ascii()
1310 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1311 #877 where a reload with bad syntax causes Dir to exit.
1313 Cut: 2.1.14 beta (not released)
1315 kes Do not free a volume on a tape drive until another volume is
1316 mounted and read, or the autochanger unloads the volume.
1317 This should help the SD re-use volumes that are already mounted,
1318 and should fix bug #886.
1319 kes Apply patch from user brettedgar that allows gnome2-console include
1320 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1321 kes Apply patch from Lucien Weller that fixes day of week calculation
1322 because of DST flag problem. Fixes bug #887.
1324 kes Move find_next_appendable_volume() to after acquiring a valid device
1325 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1327 kes Unable to reproduce bug 872. However added additional testing for
1329 kes Bug #874 resolved by documenting SQLite limitations.
1330 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1331 kes Bug #881 resolved by removing typo in mtx-changer script.
1332 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1333 approval. Added a link to the wiki on the web page, and implemented
1334 a backup from http://paramount.ind.wpi.edu
1336 kes Fix update allfrompool to pass pool name.
1338 kes Convert to pure GPL v2 license.
1339 kes Fix sscanf problems reported by Peter Buschman that caused
1340 a bus error on Solaris.
1341 kes Rework (simplify) the select prompt in bat.
1342 kes Move get_jobid_from_tid() into lib and create a
1344 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1345 should definitely fix the problem of lost error messages in the
1347 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1348 kes Eliminate tcpd.h from the project. Enclose the #include from the
1349 library with extern C ...
1350 kes Add print of signal name when a signal is trapped.
1352 Release: 2.1.12 beta
1354 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1356 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1357 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1358 makes SQLit3 run 30 times faster, though a bit less safe.
1359 kes Implement --with-batch-insert in configure and detection of thread
1360 safe libraries. It is on by default, but turned off if no thread
1361 safe library (e.g. SQLite 2) is available.
1363 kes Fix Bacula PostgreSQL buffer overruns.
1364 kes Do better checking for NULL results returned from PostgreSQL;
1365 implement retry for failed queries; clear results buffer after
1366 failed query. Hopefully this will correct the PostgreSQL failures.
1368 kes Implement algorithm to handle only one appendable volume with
1369 Prefer Mounted Volumes = no.
1370 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1371 returned from a query.
1372 kes Make volume lock recursive.
1373 kes Implement an additional volume reservation algorithm that
1374 starts by considering all reserved volumes then uses the
1375 old brute force algorithm of searching the resources to
1376 find a suitable device.
1377 kes Add new reservations debug code and refine the old code.
1378 kes Update the win32/dll/bacula.defs file.
1380 kes Tweak reservations algorithm to permit a few more cases, i.e.
1381 volume reserved, but on different drive, ...
1382 kes Enhance SD status to include Pool and Media Type for drive in a
1383 more readable format (a bit longer).
1384 kes Fix PostgreSQL double free.
1386 kes Minor refactoring of restore decryption code.
1387 kes Add code to smartall.c to detect double free of a buffer.
1389 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1390 so that bsmtp will create a correct email address (mailbox only).
1391 kes Modify 'memory' command so that the buffers are listed as 'In use'
1392 to avoid confusion with Orphaned buffers.
1393 kes I reworked the OpenSSL include/lib flags to be handled in
1394 the standard Bacula way, which should fix bug #863 concerning
1395 non-standard OpenSSL libraries.
1397 kes Implement Help Browser window for bat.
1398 kes Fix reload bug that reset StorageId to zero.
1400 kes Fix TLS #ifdefing when TLS turned off.
1401 kes Ensure that when labelling a tape with Slot=0 that InChanger
1403 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1405 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1406 add DISTINCT (required by PostgreSQL).
1407 kes Implement BSOCK authenticate_director() method. Eventually will
1408 authenicate all daemons.
1409 kes Move several more functions into the BSOCK class.
1411 kes Add code to tell the OS that we no longer need a cached
1412 file that we were reading. In findlib/bfile.c. Also,
1413 only cache files that we are reading. Thanks to
1414 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1415 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1416 kes Implement script to automatically generate cats and dll .def
1417 files for Win32 dll.
1418 kes Update README.mingw32 to include new .def file generation.
1419 kes Correct typo in UTF-8 error message as reported by:
1420 jhernandez <julianhernandez@gmail.com>
1421 kes Add additional sm_check() code on debug level 1.
1422 kes Set default debug level to 1.
1423 kes Trap SIGABRT in attempt to get traceback.
1425 kes Reduce bat connect timeout from 30 to 15 seconds.
1426 kes More restructuring and implementing BSOCK class in place of
1428 kes Remove a few unnecessary malloc() tests in crypto code.
1429 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1430 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1431 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1433 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1435 kes Fix Verify InitCatalog. The attributes were not pointing to the
1436 correct saved location.
1437 kes Implement message callback so that GUI is sure to get all
1438 daemon messages. Currently displayed in a dialog in bat.
1439 kes Ignore SIGUSR2 (Bacula timer) in bat.
1440 kes Apply regress patch from bug #859 to allow regress to work
1441 with Solaris compiler.
1443 kes Begin adding TLS support to bat.
1444 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1445 clean up lex.c and make it more readable.
1447 kes Move more bnet functions into the BSOCK class.
1448 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1449 kes Complete change of berrno strerror() method to bstrerror()
1451 Release: 2.1.10 beta
1453 kes Cleanup incorrect email addresses in bsmtp.
1454 kes Make bat display initial messages rather than discard them.
1456 kes First cut of adding .mod to the run command.
1457 kes Implement auto display of messages in bat.
1458 kes Enhanced preferences to allow all Bacula output to be
1461 kes Try to make bsmtp date routines more generic.
1462 kes Fixed bug #856 autochanger documentation.
1463 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1464 kes Add new cats entry point so Win32 builds.
1466 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1468 kes Do better checking for the MySQL 64 bit libraries looking for both
1469 .a and .so libraries.
1470 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1471 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1472 kes Require the thread safe version of MySQL during configure. Thanks
1473 to Andre Noll for pointing this out.
1474 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1475 continuing in migration code.
1476 kes Apply implementation of tray-monitor font derived from gnome-console
1477 submitted by Andreas Piesk <a.piesk@gmx.net>
1479 kes Eliminate important memory loss in SQLite
1480 kes Fixed the batch insert MySQL thread specific data that was not
1481 being freed. See cats/mysql.c:db_thread_cleanup().
1482 kes Fix restore before command.
1483 kes Convert old hdr.name to name() in a few places.
1484 kes Implement update jobid command.
1485 kes Return all time_t dates in db_get_job_record()
1486 kes Stop watchdog in SD earlier.
1487 kes Put Pool just after Storage in please mount message.
1488 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1491 kes Update the po files.
1492 kes Fix Verify InitCatalog by making it cache attributes.
1494 kes Change name bacula-bat to bat for man 1 page to correspond to
1496 kes Check for client and store NULL pointers in status command. This
1498 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1499 kes Fix sign extended editing of %p.
1500 kes Clean out a little old #ifdefing in cats/mysql.c
1502 kes If time diff between DIR and FD is more than 600 seconds convert
1503 INFO message to WARNING.
1504 kes Implement heap size display in status for all daemons.
1505 kes Attempt to fix MySQL db open memory loss (not successfull).
1506 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1507 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1508 Query. This looks like a MySQL but but by doing extra releases,
1509 the memory goes away. This should fix bug #847.
1511 kes When backup fails, cancel SD before waiting for sd termination.
1512 kes If SD is waiting for FD to connect during cancel, wake up the
1514 kes Fix fsf code so that errno is correctly reported.
1515 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1517 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1518 so that Bacula doesn't later stumble into a seg fault.
1519 kes Use the term Restore Client in the restore Job report.
1520 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1521 the original job's FileSetId.
1522 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1523 spooling in migration jobs. Not yet tested.
1524 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1525 reading conf file from a pipe. However, do it with open_bpipe()
1526 rather than popen. Not yet tested.
1528 kes Fix an ugly bug where the VolCatBytes were getting updated
1530 kes Implement bconsole memory command that prints current memory
1531 usage, plus smartalloc dump.
1532 kes Clarify some error messages in backup, admin, and migrate.
1533 kes Shrink label dialog to smaller size.
1534 kes Invert Cancel OK buttons on restore to be OK Cancel.
1535 kes More strerror() to bstrerror() conversions.
1537 kes Start implementing bstrerror() in place of strerror().
1538 kes Stripping path -- seems to work.
1540 kes Prevent door and port files from being restored (mostly
1542 kes Free an unreleased buffer in compat code.
1543 kes Change console Job name from *Console* to -Console- to eliminate
1544 Win32 filename problems. Put Win32 path separator when creating
1545 Console file. This fixes bug #846.
1546 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1548 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1550 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1551 to force Win32 error message.
1553 kes First cut strip path. The data should be passed to the FD,
1554 but nothing is done with it yet.
1555 kes Enhance the digest and signature routines in the crypto
1556 library to accept a JCR and to use it to print error messages
1557 so that they will go in the Job report rather than the daemon's
1559 kes Simplify some of the verify signature code.
1560 kes Simplify a few of the alternative returns in the signature
1563 ebl Use only POSIX regex instead of GNU regex in breg.c for
1564 File relocation. It fix broken freebsd compilation.
1565 kes Convert all other Dir files to use new ua class message
1567 kes Tentative fix for missing digest signature in bug 807.
1568 kes Correct handle problem in new win32_ftruncate routine.
1569 kes Convert ua_purge.c and ua_update.c to use new ua class
1570 message routines for bat.
1572 kes Correct incorrect installation of LICENSE in Win32 installer.
1573 kes Display LICENSE at the beginning of the Win32 install.
1574 kes Attempt to correct the need for the png files to be installed
1576 kes Reapply my bat.conf install script in qt-console. I think I
1577 editted bat.pro instead of bat.pro.in and it was lost.
1578 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1579 the /var/lock/subsys for subsysdir. Also corrects typos in the
1582 kes First cut update job.
1583 kes Correct configure to include qmake of src/qt-console directory.
1585 kes Make restore job yes/mod/no print in one command so GUI works.
1586 kes First cut implementing backup and restore client.
1587 kes Correct editing in Verify output that caused a seg fault.
1589 kes Insure that bat.conf is not overwritten during installation.
1590 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1591 while I was implementing migration in March 2006 !
1593 ebl Cleanup file relocation, using char *RegexWhere instead of
1594 char *where + bool where_use_regexp
1595 kes Update some manpages and add bat manpage.
1596 kes Make a first cut at converting bacula.spec.in for bwx-console
1598 kes Apply patch from John Goerzen to add hostname as fourth argument
1599 to make_catalog_backup script.
1600 kes Fix typos I introduced into bsmtp.c
1601 kes Make pm_strxxx() routines handle input of NULL pointer. This
1602 is to protect from NULL pointers returned from SQL databases.
1603 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1604 kes Add more debug to FIFO code -- fix fifo regression test.
1606 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1607 kes Add thread timer to bnet_connect() to break from OS if wait time
1610 kes Update Win32 build to include new files, new symbols, and
1612 kes Implement socket level heartbeat (tcp_keepidle)
1613 ebl Commit File relocation patch
1614 kes Make bat have 'make install' target.
1615 kes Warn during install if old gnome-console binary found.
1616 kes Warn during install if old wx-console binary found.
1617 kes Add -8 option to bsmtp command line to add content type utf-8.
1618 Fixes bug #809. (Character coding problem in bsmtp).
1619 kes If < is found in target (from, to, cc) then do not enclose the
1620 target in < > in bsmtp. Fixes bug #772 (malformed address).
1621 kes When printing certain items in dbcheck, stop after 300000.
1622 Fixes bug #822. (dbcheck loops).
1623 kes Incorrect status in Dir after waiting for mount with poll set.
1626 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1628 kes Print waiting to reserve a device every 5 mins.
1630 kes Don't call close_part in label.c if tape and relabel.
1631 kes Don't free volume if busy in close() -- should help with
1633 ebl Fix #824 RunScript bug (After script could be execute twice)
1634 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1635 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1636 Add a regression script to test RunScript
1638 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1641 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1642 deprecated. No additional bugs will be fixed, and they will be dropped
1643 in a future release (probably 2.4.0).
1644 kes Change name of wx-console to bwx-console to make it more Bacula
1646 kes Change the name of gnome-console to bgnome-console to make it
1649 kes Some time in March, a Feature Request with patch from Jorj Bauer
1650 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1652 The ability for the director to validate a Client (FD) CN against
1653 an arbitrary set of patterns rather than the hostname, with
1654 A new 'TLS Allowed CN' set of directives which are implemented
1655 in the Client resource. Then pattern matching is used in place
1656 of hostname matching against the Certificate's CN. As an example, we
1657 have certificates which (a) use a local CA, and (b) have a CN of the
1659 kes Add new/changed entry points to Win32 build
1660 kes Create unaccepted-projects for projects that are not accepted.
1661 kes Simplify locking in the reservations system.
1662 kes Add more debug code in reservations.
1663 kes Make sure error condition on reserving a volume is handled correctly.
1664 kes Correct handling of volume_in_use.
1665 kes Correct handling of initializing a device.
1666 kes Move handling of broadcasting releasing a device into release_device().
1667 kes Correct attaching dcr to dev so that it is only done if device
1668 is properly initiated.
1670 kes Locking debug level tweaks in SD.
1671 kes Tweak new Volume code.
1673 kes Add exec external-command [wait-seconds] to bconsole. This
1674 executes the external-command. Note! normally external-command
1675 should be enclosed in double quotes.
1676 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1677 it should normally be off in a production system.
1679 kes Implement die command for SD so that we can force it to dump.
1680 kes Implement SD lock debug code.
1681 kes Implement new algorithm for keeping Volume list in SD. It
1682 is now owned by the device.
1684 kes Implement new code for freeing in use volumes that should
1685 resolve if not all, some of the problems of multiple drive
1686 tape conflicts described in bug 801.
1688 kes Fix gui/bacula-web/images files in svn.
1689 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1691 ebl Fix a bug in batch mode (in string escape)
1692 kes Correct migration prune SQL typo that crept in in a
1693 recent 2.1.x change.
1695 kes Move bnet_despool() into class in bsock.c
1696 kes Modify job report to include director name and Build OS.
1697 kes Move drop root privilege and check_catalog() before fork.
1698 kes Add update database scripts (version 9 to 10) to updatedb directory.
1700 ebl Check size and age of each file after its backup to see if
1701 it has changed during backup, if 'checkfilechanges' is set.
1702 The FD will do an extra check (stat(2)) after
1703 each file backup. mtime, ctime and size are compared with
1704 'before backup' information. If time or size mismatch, an
1705 error message will be generated. You must upgrade FD to use it.
1707 kes Make database name and user configurable
1708 --with-db-name=xxx --with-db-user=xxx
1709 kes Add back database type to message.c for debugging.
1711 kes Implement dir_sql() which issues an SQL query.
1712 kes Modify bat medialist to use dir_sql() and do some minor C++
1713 formatting as well as eliminating a number of pointers, simplifing
1716 kes Fix some of the mtx-changer grep commands for tape label readers.
1717 kes Convert a number of bsendmsg into the appropriate send/warning/error
1718 message class calls.
1719 kes Suppress the using database message in the .sql command.
1720 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1722 kes Add context menu for floating a window.
1723 kes Some minor cleanup and name changes in qt-console
1724 kes Add doing mt setblk 0 in Win32 mtx-changer.
1725 kes Apply Martin's bug fix to move definition of ENODATA for
1727 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1728 sqlite2 and sqlite3.
1730 kes More pruning cleanup.
1731 kes Turn on wait_for_drive by default in mtx-changer.
1732 kes Turn on Batch insert code by default as it now passes regression.
1733 kes Add ./configure --enable-bat to enable building of Bat.
1734 No install yet though.
1736 kes Implement a new .sql command for bat.
1737 kes Implement code to turn off pruning in obtaining the next volume.
1738 Pruning is turned off for the status dir command, but turned on
1739 for SD requests and for the list nextvolume command.
1741 kes Correct Qmsg() that was not updated correctly when committing a
1742 previous change (probably the recent TLS patch).
1744 kes Write new subroutine is_volume_purged() that explicitly checks
1745 if the Volume is purged, and if so marks it as such. This should
1746 resolve problems reported about needing to mount twice to recycle
1748 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1749 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1750 amount of duplicated code.
1751 kes Do volume pruning only for the Media Type desired (reduces pruning time
1752 if multiple Media Types are in the same pool).
1753 kes Implement more detailed info in the Job report for the Bacula version
1755 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1757 ebl Add bbatch tool to bench database and insert mode.
1758 Fix sql quote stuff in batch mode
1759 Fix sql stuff for mysql
1761 kes Correct problems with am/pm scheduling. Fixes bug #808.
1762 kes Implement new prunning code that prunes up to 1000 jobs at
1763 the same time. The same technique can be applied to a number
1764 of other prune/purge subroutines.
1765 kes Add an insanity check when starting a new tape job to ensure
1766 that the tape position has not been changed. If so fail the
1768 kes Fix Win32 build for dlls to add the folllowing:
1769 src/lib/bsock.c -- new file with new entry points
1770 src/lib/dlist.c -- new entry points
1771 src/cats/sql_create.c -- new entry point
1772 src/cats/sql_cmds.c -- new DATA item exported
1774 ebl batch mode cleanup bscan-test is ok now.
1775 kes Implement SD code to check length of disk volume before appending.
1777 kes Correct return status on db_batch... routines.
1778 kes Add call to db_write_batch_file_records() to migration code.
1779 ebl Fix AfterJob timing
1780 kes Move the checking of the database in initializion of the Director
1781 to after we drop privileges. This avoids the need for both root
1782 and bacula access to the DB.
1783 kes Correct a misplaced variable definition in src/filed/backup.c
1784 kes Correct how the new batch insert db_create_attributes_record()
1785 uses the arguments. Caused a seg fault in bscan.
1786 kes Implement lock() and unlock() methods in DEVICE class.
1787 Implement block() and set_block(xx) methods in DEVICE class.
1788 kes Modify bnet_connect() so that it uses time() to check for the
1789 wait time expiring (on some OSes, some system calls may not
1790 return immediately).
1791 kes Modify Verify to obtain the previous JobId when it is actually
1792 running rather than at schedule time (as it was in 1.38.x).
1793 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1795 kes When checking pid in pid file, continue running if the pid is
1796 the same as ours. This occurs on IRIX after a system crash.
1799 kes Extend new GUI API.
1800 kes Make the ua structure a class, and implement send_msg(),
1801 error_msg(), warning_msg(), and info_msg().
1803 kes Apply fix from for building wx-console on the Mac from
1805 kes Implement new select mechanism for GUI programs.
1806 kes Reorganize initialization of stackedWidgets in bat.
1808 kes Add updated nagios plugin supplied by Christian Masopust.
1810 kes More bat implementation.
1811 kes File migrate bug with Pool Occupancy using mediaid instead
1812 of jobids. Fixes bug #795.
1813 kes Fix orphaned buffers in filed backup and verify due to
1814 crypto buffers not freed during errors. Fixes bug #789.
1815 kes Extend new GUI api code to tree commands.
1816 kes Ensure that tree and dot commands check console ACLs.
1817 kes Permit marking directory with trailing slash.
1818 kes Allow 20 console connections (instead of only 10).
1820 kes Add smartctl call to bacula-sd.conf as an example of getting
1823 kes Modify jobq.c to let simultaneous restore jobs run. This may
1824 cause them to fail if they cannot get a drive.
1825 kes Add Client Connect Wait to Storage daemon to permit users to
1826 modify the time the SD waits for a FD connection.
1828 kes Correct virtual changer check which was backwards. This caused
1829 volumes to be unloaded into slots already occupied.
1831 kes Apply Command ACL filter to JobId list in restore command.
1832 kes Correct typeo in var.c patch.
1834 kes Don't let Bacula prune File or Job records for the current Job.
1835 kes Fix variable substitution pad + inc bug reported (with patch)
1838 kes Correct SQLite log table index as reported by Luca Berra.
1840 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1842 kes Begin implementing new comm signals for API.
1843 kes Fix a few places in lib/message.c where the open fd may
1845 kes Continue implementing lib/bsock.c (real class). Make jcr,
1846 who, host, and port private. There are new methods to access
1847 them for non-class use. This required touching a number of files.
1849 kes Add LANG=C to autoconf/randpass so it works with languages other
1850 than English. Fixes bug #788.
1852 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1854 You will not be able to generate Include/Exclude list any more.
1855 It will be fixed soon.
1856 If you want to use this, you can apply
1857 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1859 kes Restore of sockets created false error messages because Bacula
1860 no longer restores sockets, but the code was still trying to
1861 set the attributes on a non-existent file. Reported by a user.
1862 ebl finish RecyclePool feature
1863 Media will takes Pool.RecyclePool
1864 when moving from Scratch to a Pool or when user will do
1865 update volume=xxx frompool
1866 To use it, add RecyclePool = aPool to your Pool resource
1869 RecyclePool = Scratch
1873 kes Expand new BSOCK class adding signal() and new BNET signals.
1874 kes Begin enhancing the dot commands adding a new API function
1875 that returns more information and will make it easier
1876 to interface to the Director from a program.
1878 kes Make DEVICE fd private. Its new name is m_fd, and can be
1879 obtained with dev->fd() outside the class. This is the
1880 first of many DEVICE members to be made private.
1881 kes Implement Michael Renner's idea on having a virtual disk
1882 changer. I made some minor modifications (e.g. I did not
1883 implement the Virtual Changer directive, but simply set
1884 the Changer Command to an empty string.
1886 kes Implement a BSOCK send() method that writes the whole record
1887 in a single write() request rather than in two.
1888 ebl add update volume=xxx recyclepool=yyyy
1889 volume takes recyclepool from pool when using update volume=xxx from pool
1891 kes Fix encryption deblocking bug, which caused some restored files
1892 to be truncated. This fixes bug #763.
1893 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1894 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1896 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1897 ebl Use btime_t instead of uint64_t in media patch.
1899 kes Optimize the use of the database a bit in the Status dir command.
1900 Only open it when needed, ensure that if any previous database
1901 was opened, it is closed.
1903 kes Correct VolCatBytes bug from media patch.
1904 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1905 in the case of orphaned records.
1906 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1907 and File records in 300K chunks to be more efficient. This
1908 idea came from Juan Luis Frances (if I remember right).
1909 kes Apply Eric's scratch patch that moves a purged Volume to
1910 the RecyclePool. Question: how is RecyclePool set? what
1911 happens to the ScratchPool?
1912 kes Apply Eric's media patch that collects read/write media
1913 times as well as byte counts. This patch requires a
1914 simultaneous upgrade of the DIR and SD. Note, there
1915 should be some way to turn off timing. I'm not sure
1916 times are in Bacula units.
1917 kes Apply Eric's batch-insert patch.
1919 kes Update projects list.
1921 kes Implement Include/Exclude file lists in FD as dlists using
1922 the new dlistString class. This permits efficiently having
1923 large include/exclude lists and completes project Item 25.
1924 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1925 console is authorized to cancel the job. This fixes bug
1927 kes Modify SD so that the VolCatJobs medium record is updated
1928 at the beginning of a Job rather than the end. This
1929 fixes bug #775 where exceeding MaxVolJobs caused jobs
1931 kes Added a mutex around getting and setting Volume information
1932 so that multiple simultaneous jobs will single thread.
1934 Switch to using Subversion
1935 kes Remove src/pygtk-console/ from configure
1937 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1938 plus the entrypoints.
1939 kes Apply patch supplied that corrects debug print
1940 in canceling jobs for max run time. Supplied as
1941 part of bug #621, which was previously fixed.
1943 kes Test on job_canceled() and sd_msg_thread_done inside
1944 loop starting the message thread to avoid a race condition.
1946 kes Remove rl_catch_signal from console.c as it conflicted
1947 with the header definition. Fixes bug #765.
1948 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1950 kes Clarify some stored/acquire messages to indicate if the
1951 problem is with read or append.
1953 kes Fix memory leak with storage ids in cats/sql_get.c
1954 kes Terminate watchdog earlier to avoid reference to released
1955 memory -- reported by Jason Austin.
1956 kes Move closing the database from jobq.c to the director daemon
1957 termination routine. This fixes memory leaks for shadow jobs
1958 (i.e. migration jobs).
1959 kes Free up the unique jobid chain items in migrate.c. This fixes
1960 a memory leak problem.
1961 kes Convert some ugly looking for statements to use foreach_alist
1962 in findlib/find.c. This will facilitate converting the structures
1963 to use dlist (for large include/exclude lists).
1964 kes Fix a bug in the btree.c and btree.h routines, then rename them
1965 rblist and add them to be built in src/lib. Include some new
1966 methods written by Rudolf Cejka that make the code more readable
1967 (hides some of the ugly casting).
1968 kes Add set_next() and set_prev() methods which make the code much more
1969 readable. Also add a new dlistString class that facilitates storing
1970 strings in dlists. To be used in the large include/exclude lists.
1971 kes Make some trivial modifications to lib/tree.h that use rblist
1972 rather than dlist for storing the tree links. This was suggested
1973 by Rudolf Cejka. The result of this is that the restore tree now
1974 uses red-black binary trees rather than simple linked lists. This
1975 should give rather dramatic speed improvements for directories
1976 contining large numbers of directories/files (more than 10000).
1978 kes Fix maxruntime bug #621.
1980 ebl Implement the include JobID in spool file name project.
1981 kes Reorder projects file in order determined by Jan 2007 vote.
1982 kes Implement item #12 on project list -- quick release of FD by
1984 kes Fix open of SQLite3 db where user does not have write permission
1985 so that DIR does not crash. Fixes bug #761.
1987 kes Add back missing @ in Win32 Makefile.
1988 kes Change 'Device not configured to autolabel' from INFO
1990 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1991 which should restart an indefinite # of times.
1992 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1993 other DIR specifications.
1995 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1996 Fix path quoting in SQLite scripts.
1997 Fix problems with SHGetFolderPath.
1999 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2001 kes Fix Job restart on error bug that promotes an Inc to a Full
2002 backup. This should fix bug #755.
2003 kes Add qt-console and first cut of code.
2007 kes Fix Bacula->Documentation link on Win32 to point to index.html
2008 instead of bacula.html. Fixed bug #750.
2009 kes Return JobId in db_get_job_record() when JobId==0. This should
2011 kes Do not release source pointers when restarting a failed job.
2013 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2014 This *should* fix bug #747.
2015 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2018 kes Modify USTORE constructor to set an empty store_source string,
2019 and don't copy the store_source string in a cancel. Hopefully
2020 this will fix Arno's seg fault, bug #744.
2021 kes Add back code to disable conio in configure. Fixes bug #743.
2022 kes Correct the Options scanner in the FD to correctly handle
2023 SHA1 option, which was eating the next option. Reported by
2025 kes Add code to indicate when the SD is spooling, spool wait, and
2026 despooling as requested by Alan Brown.
2028 Version 2.0.0 released: 4 January 2007