1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 ebl Rename faketape to vtape.
29 ebl Update faketape driver.
31 ebl Modify faketape driver to avoid sparse file.
32 kes Add make clean of qt-source directory during ./configure
33 kes Store last block number written to tape in DEVICE and
34 use it for testing for correct last block on EOT.
36 Release Version 2.4.0:
40 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
43 kes Add create_postgresql_database.sql to Win32 installer. Should
44 fix problem reported by Juilio Monteiro.
45 kes Get correct slot when auto unloading a device. This fixes bug
48 kes Fix multiple media restore.
49 kes Make DEVICE Slot private and access it via a method.
50 Allows better control over when it is set and cleared.
51 kes Fix possible seg fault if SQL error.
53 kes Add Martin's fixes to argument scanning for the estimate
54 command. This fixes bug #1093.
55 kes Add debug code to SD.
56 kes Fix renaming a Volume, which used the wrong Volume name.
58 kes If operator has rewind tape, print warning, release tape and
59 try once more. If tape is positioned somewhere, something went
60 wrong, so mark the tape in error and try once more. Previously
61 this error was fatal, now it produces an error message.
62 kes Ensure correct volume name displayed during restore
63 kes Ensure that Volume is mounted for restore.
65 kes Fix a few more Coverity reported problems.
67 kes Apply Allan Black's status dir job count patch.
68 ebl Add information about IMPORT/EXPORT slots in mtx-script.
69 kes Enhance a couple of SD debug messages.
70 kes Tweak unload flag setting and ensure it is set during swap.
72 ebl Fix #1091 about bad output in estimate command.
74 kes Modify autochanger locking to attempt to avoid race
76 kes Make sure device not busy before doing label command.
77 kes Display open() errors except when polling. Previously too
78 many were suppressed. This should fix bug #1070.
79 kes Fix Win32 reparse points. Bacula will not recurse into any
80 reparse point directory, including mount points, unless the
81 directory is explicitly mentioned at the top level (same as
82 with Unix). A file that is linked to another file will be
83 backed up -- much as Unix does for hardlinked files.
86 kes Remove double quotes from ChangeLog and ReleaseNotes
87 kes Remove StorageId test when pruning and recycling (Eric's changes).
88 kes Remove old form of locking when getting volumes -- causes deadlock.
89 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
90 the name unique and to eliminate compile time error.
91 kes Add accurate.o to Win32 FD Makefile
93 kes Fix cats dll build on Win32 after db_update_job_end_record
94 calling sequence change.
95 ebl Switch to tokyo dbm instead of htable in accurate code
96 ebl Include tokyo dbm to bacula source tree
98 kes Fix buffer overruns detected by Coverity.
100 kes Tweak joblog display.
102 kes Implement --without-qwt
103 kes Fix layout of restore tree dialog
104 kes Add configure bat QWT libraries, so that bat can be built
105 with or without the QWT libaries.
107 ebl Add dummy tape driver for regression tests.
108 kes Make sure we unload the right slot when swapping.
110 kes Add debug times, reduce size of two-pool-changer test
112 ebl Tweak autoconf scripts for faketape
114 kes Improve SD reserve debug code.
115 kes Testing an improvement to free up volumes no longer in use.
117 kes Rework SD acquire for read to handle autochanger Volume
119 kes Implement regression that explicitly tests swapping a Volume
120 from one drive to another.
121 kes Enhance disk-changer to detect most error conditions.
122 kes Fix SD code so that it properly swaps a Volume between drives.
123 This fixes bug #1083.
125 kes Apply libdbi patch from Joao Freitas for regress and for
126 Bacula trunk. Regress now works with libdbi. Nice.
127 kes Apply .nobackup patch from bug #1077 submitted by
129 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
130 name into jobs cloned via the run directive.
132 kes Prevent a Volume that is being swapped from being freed from
133 the volume list. This will most likely fix, at least partially,
135 kes Fix strippath so that it does not get a buffer overrun and crash FD.
136 This fixes bug #1078.
137 kes Remove 50 millisec wait in SD that broke debugger.
138 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
139 that a job may run, counted from when the job was scheduled.
140 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
141 a job may block waiting for a resource, counted from when the job starts
142 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
143 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
144 that implements multiple commands per line in the console when using
145 readline. Modify the default to use a semicolon as the command separator.
147 ebl Fix SQL query in migration code.
148 ebl Make accurate mode with hash disk pass regression tests
150 ebl Implement first cut of accurate backup with hash disk.
152 kes Force unload of volume when wrong volume mounted in SD.
154 kes Fix bat seg fault at termination.
155 kes Add Bacula generated version to bat about box.
158 kes Experiment with allowing multiple read jobs.
159 kes Move final volume swapping code to DCR method and
160 call it from acquire_for_read().
161 kes When wrong volume is mounted during read, unload_autochanger.
163 kes Integrate the libdbi changes from Joao Henrique Freitas
165 kes Stop searching for Volumes in SD askdir if DIR returns the
166 same volume name twice in a row.
167 kes Close bat console windows first to eliminate error message
170 kes Tweak the swap Volume from one drive to another code so that
171 it now seems to work.
172 kes Resolve several problems with recycling that broke the new
173 code (these problems are in 2.2.9 as well).
174 kes Remove the volume lock when calling the sysop code.
175 kes Don't mark a reserved volume with no writers as unused otherwise
178 kes Rework class structures for VOLRES, DCR, and DEVICE to make
179 the method names a bit more logical, and for more logically
180 handling the responsibilities.
182 kes Remove redundant code in terminating the scheduler that just
183 causes a seg fault in many cases.
184 kes Cleanup releasing a volume and make it a DCR method.
185 kes Improve algorithm for detecting pre-reserved volume and
188 kes Tweak volume swapping code so it works.
189 kes Correct name overloading in mount.c
190 kes Replace released flag in VOLRES with reserved and add access
191 methods for the VOLRES class.
192 kes Prevent volume from being released while being swapped.
193 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
195 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
197 kes Refactor parts of stored/mount.c
199 ebl Add sanity checks for VolWriteTime and VolReadTime
200 ebl Take care of bad clock changes while computing VolWriteTime
201 and VolReadTime. This should fix or limit #1066
202 kes Correct error string numbers in dird/catreq.c
203 kes Restructure reserving, acquiring, and mounting volumes. Calls to
204 autochanger are deferred for mount.c -- simplifes the code.
206 kes Do not prune any running job. It just fails the job.
207 kes Lock the volumes when changing dev->reserved_device and marking
208 the volume unused otherwise the device can get reserved by
209 another job before the volume is released, thus blocking it.
211 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
212 kes Fix bug #1063, reuse of freed ptr in list nextvol.
213 kes Release regex compile buffer in filed/job.c
214 kes Add proper type of const char in sql_create.c
215 kes Turn off debug in daemon termination routines
216 kes Move free_volume_list() before devices are freed in stored.c
217 kes Fix reference to uninitalized stack variables in bregex.c.
218 This should correct bug #1067.
220 kes Fix possible seg fault in SD when freeing a volume entry.
222 kes Implement unload_dev() before swap device.
223 ebl Add statistics prunning with option and menu
224 kes Separate unload_dev() from unload_other_device() in autochanger.c
226 kes Apply patch from bug #1069 that corrects spurious error messages
227 when ACLs enabled on SGI but no ACL exists.
228 ebl Fix small segfault in bacula-sd when debug level is 500
229 kes Modify run_program() and run_program_full_output() to use
230 call by reference for the results string. This corrects a long
231 standing problem where the address of the string may be changed
232 in the subroutine but not in the calling program.
234 kes Re-enable code to remember last volume mounted on a non-tape
236 kes Add patch supplied in bug #1068 that fixes a SD crash when using
237 a Virtual autochanger.
238 kes Generate correct JobMedia records during spooling/despooling when
239 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
240 <tih@hamartun.priv.no> for excellent analysis and testing.
242 kes Tweak hash algorithm for htable using Martin Simmons idea
243 for doing a circular shift.
244 kes Remember what volume is in VTLs (previously turned off for
246 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
247 pointed out some problems in creating JobMedia records during
248 spooling with concurrent jobs. Fix the problem by updating the
249 start file position before despooling and generate a jobmedia
250 record at the end of despooling.
252 kes Fix handling of JobMedia records during spooling and when a
253 Volume is changed without actually writing data to the Volume.
255 kes Rework certain SD locking based on gdb tracebacks of deadlocks
256 sent by Eric. This code now uses only the volume_lock() rather
257 than the reservations lock when at EOM and acquiring a new
259 kes Ensure only one exit point in several subroutines.
261 kes Implement bsock code to permit locking. Use the new code in Verify
262 in the FD to prevent the heartbeat thread from disrupting the Verify
263 data sent to the Dir.
264 kes Modify SD locking to eliminate locking the reservations system from
265 outside the system. Use the volume lock when getting media data
266 and reserving a new volume at end of media.
267 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
268 when SD starts are not locked into place.
270 kes Fix error compiling runscript code on 64 bit machines.
271 kes Tweak Win32 mount point code.
272 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
273 cleared giving bad file estimate).
274 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
277 kes Keep Schedule run lists in order as suggested by
280 kes Implement autostart scripts for Debian.
281 ebl Implement upgrade catalog scripts.
283 ebl Apply jobstat patch for long term statistics. Have to implement
284 purge stats command and upgrade scripts.
285 kes Fix mtx-changer.in for broken Debian mt program.
287 kes Fix large number of JobMedia records reported by Eric Bollengier.
289 kes Apply doc fix from bug #1062.
290 kes Resolve crash and improper restore wx-console Win32 restore
291 GUI. Fixes bug #1065.
292 kes Update Win32 wxWidgets to latest version.
293 kes Attempt to do correct handling of Win32 mount points. Should
295 kes Fix Win32 FD backup/restore memory leak due to improper termination
296 of BackupRead/Write. This fixes bug# 1038.
298 ebl Reduce memory usage for accurate backup, working only with ctime
299 and mtime. (not all Lstat field)
300 About 40MB for my linux system (400.000 files)
302 kes Add dcr->reserved_volume flag that allows us to release a volume
303 even if it is not vol->released. This allows maxvol2 to work when
304 Volumes expire and we are already writing to the device (i.e. a
305 volume is pulled out from under us by another job terminating after
306 we reserve the drive).
308 ebl Permit multiple command/console per runscript definition.
309 RunScript { command = /bin/true ; command = /bin/false ... }
310 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
311 (restart an application) just after the VSS snapshot on windows.
312 kes Don't zap dcr values during release_volume() as they might
313 have the next Volume to be mounted.
314 kes Fix AIX prototype.
316 kes Second cut of drive switching during backup.
319 kes Update Win32 version of wxWidgets to most recent version.
320 kes Tweak Copy job details.
321 kes Rework dir_find_next_appendable_volume to make a bit more effort
322 to find a suitable volume before giving up.
324 kes Make ask_sysop_to_create... to return if waken from wait.
325 This helps get out of blocked conditions.
326 kes Experimental implementation of switch_device in reservations.
327 kes Implement FD version to allow easier protocol changes.
328 kes Add Plugin Options string -- not yet passed to FD.
329 kes Implement PluginOptions ACL.
331 kes Attempt to correct problems with restores with autochangers and
332 use counts going negative
333 kes Rework SD status command and implement API for bat. Implements
334 header, runing waitreservation, devices, volumes, spooling,
335 and terminated status keywords.
336 .status storage=xxx <keyword>
337 kes Clarify TLS error message by adding double quotes around name.
338 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
339 kes Pass jcr to tls routines so debug messages can be handled better.
340 kes Rework jobq resource allocation code, and possibly fix a bug
341 that caused reference counts to get out of sync.
343 kes Rename fd/dir plugin to use Bacula standard underscore.
344 kes Plugin work -- bring dir up to fd level.
345 kes Start implementation of VTL code
346 kes Fix Win32 build after adding new cats subroutine.
348 kes First cut at Duplicate Job implementation.
350 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
351 kes Start PluginOptions string, and refactor a bit of ua_run.c
352 ebl Apply Allan patch that permit to reset recyclepool.
354 kes Test patch -- possible fix or improvement for bug #1053
355 kes Refactor FD and SD status commands to permit new API code in
356 SD, and to fix Win32 build.
357 kes Win32 build is now working.
359 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
360 some ideas in patch from Scott Bailey.
361 kes Begin implementation of duplicate Job control.
362 kes Fix some of Win32 build after recent additions.
363 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
364 which causes the FD to detect whether or not the OS has the
365 honor no dump bit (*BSD systems), and if so, to skip backing up
366 any file with this bit set. The feature is enabled by setting
367 'honor no dump flag = yes' in the Options section of a FileSet.
369 kes Correct po warning message with datarootdir
370 kes Implement more code in dird.c to put configuration parsing in
371 a class rather than use globals.
372 kes Restructure SD status command for implementation of bat API
375 kes Suppress incorrect 'Will not descend from x into y' messages.
376 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
377 daemon globals used by parser.
378 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
380 kes Fix free of plugin_list when none exists.
382 ebl Apply accurate project patch.
384 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
385 on non-mempool object)
386 kes First cut of converting FD .status to work with bat API.
388 .status client=XXX header
389 .status client=XXX running
390 .status client=XXX terminated
391 kes Implement first cut of Copy Job.
392 kes Implement Catalog in Pool resource. It overrides catalog specified
393 in the Client resource.
395 kes Apply patch (with some difficulties) from Joao Henrique Freitas
396 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
398 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
399 ftruncate() actually works. In the case of some (cheap) NAS devices,
400 it does not, and so recycling NAS Volumes does not work. The code
401 simply unlink()s the file, then recreates it. This fixes bug #1011.
403 kes First incomplete cut of big malloc blocks for htable.
404 kes Tweak plugin code.
406 kes Plugin debug code + tweak a couple bat dialog layouts
408 kes Fix creating first JobMedia record during Migration to include
409 proper index. This caused slow restores of migrated jobs.
410 kes Temp fix to plugin name file_index.
411 kes Bacula backed up and restored a MySQL database.
413 kes Implement plugin restore.
414 kes Implement parsing of db_driver to give db_type index.
416 kes First cut of plugin restore code.
417 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
418 and do not strip paths on symbolic links.
419 kes Set catalog backup database and user name from values specified on
420 the ./configure line.
421 ebl Fix #1031 about wrong pool source information in job report.
424 kes Remove a redundant jcr argument to find_files, match_files, and
426 kes Implement '.status dir header|scheduled|running|terminated' that
427 prints the requested status section. With the exception of the
428 header, the other reports have fields separated by tabs (\t).
430 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
431 a resource embedded run command to find a since time if no explicit
432 since time was supplied on the command line.
433 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
434 that updates the state file at job termination time in addition to
435 when the daemon terminates.
437 kes First version where a plugin did a backup.
438 bpipe-fd.so created a backup file, wrote a test
439 string to it, and Bacua could restore this fabricated file.
441 kes Implement DB Driver = string for the DBI driver.
442 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
443 kes First cut of code for loading Win32 plugin dlls. Implement
444 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
445 and implement a dlfcn.h file based on opengroup's definitions of
448 kes First cut plugin directives.
450 kes Apply patch from bug #1049 to prevent stripping the path on a
452 kes Attempt to fix bug #1047 where stripping a path corrupts the
453 heap. Waiting for feedback.
454 kes Correct the Mount message not to suggest labeling a new tape
455 when doing a restore. Submitted by email by John Stoffel.
456 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
457 FD by using casting. Reported in bug #1042.
459 kes A bit of crypto cleanup. More later.
461 Release Version 2.2.8
463 kes Apply patch from Martin to correct bug #1040, bscan sets existing
465 kes Fixed important spelling error in doc -- bug #1045.
467 ebl Fix bextract to be able to extract non-portable Win32 data to
469 kes Move initialization of read/write res lock earlier in the code.
470 This fixes the crash with a null conf file. This fixes bug
472 kes Redefine CURES in lib/parse_conf to be URES and move it all
473 into lib/parse_conf.c -- this responds to bug #1042, but does
474 not fix it. The fix is not to compile with FORTIFY_SOURCE.
475 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
476 the trunk SVN. I don't think this was reported as a bug.
478 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
480 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
482 kes Add DataDespooling and DataCommitting status (committing is
483 the last despooling).
484 kes Finish implementation of new reservations code noted below.
486 kes Fix bsnprintf for float point numbers. I broke recently when
487 parameterizing some variables. This fixes bug #1036.
488 kes Undo recent reservations changes ... will apply them later
489 when they work better.
491 ebl Fixes #1034 which cause mysql to hang the connection after 8h
492 ebl Change default statistics target of filename.name and path.path
493 fields for PostgreSQL. This speeds lookup by indexes. Thanks
495 kes A few more tweaks to new reservation code. Make sure to clear
496 vol released flag when retaking volume. When reading label and
497 label is bad mark volume unused. When recycling, mark volume
498 unused so it can be renamed.
500 kes Fix reserve_volume() so it doesn't release a volume in use
501 (i.e. a volume entry not marked released). This should be
502 the last part needed to fix bug #1018.
504 kes Move Heartbeat documentation from Job to Director resource.
505 This fixes bug #1033.
507 kes Fix existing switch drive SD code to call autochanger to release
508 any old volume. This must be done to keep the autochanger from
509 releasing subsequently newly reserved volumes in doing a close().
510 This should fix bug #1018.
511 kes Fail if attempting to get console input in batch mode. This
512 should help fail RunScript console commands that are incomplete.
513 kes First cut implementing switch_drive() in SD (not actually called).
515 kes Implement first cut running console commands in a RunScript.
517 ebl Fixes bug #1028 where 'Selection Type' option was not usable
519 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
522 Release Version 2.2.7
524 kes Add new free_tls() entry point so that Win32 builds.
525 kes Fix compile warning in src/lib/util.c
526 kes Fix entry point for edit_job_codes() so that Win32 builds.
527 kes Fix seg fault Frank Sweetser reports in regression testing
528 on his systems. The problem was that the original author of
529 bsnprintf.c did not take into account the side effects of
530 using ++x in the argument to a #define.
531 kes Make SD protocol backward compatible with version 2.2.x.
533 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
534 because Bacula no longer restores sockets.
535 ebl Always use ignorecase fileset option on win32 FD.
537 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
538 that implements double quoting include names in conf files,
539 and also allows piping input by having the first character
540 be a vertical bar (|).
541 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
542 that implement %f in RunScripts to pass the FileSet name.
543 kes Skip leading | when lex input comes from a pipe as suggested
544 by Michael Stapelberg <michael@stapelberg.de>.
546 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
547 Nerijus Baliunas <nerijus@users.sourceforge.net>
549 kes Implement Plugin Directory and plugin events.
551 kes Implement a security enhancement: TLS authentication but no
552 encryption. Enabled by setting 'TLS Authentication = yes'.
553 Note when this is on, TLS encryption is turned OFF!
555 kes This patch corrects a problem where the maximum concurrent storage
556 jobs counter gets out of sync during restore jobs causing jobs to
557 'wait on max Storage jobs'. This patch fixes bug #1009.
559 kes This patch fixes bcopy so that it produces correct Volumes.
561 kes This patch eliminates spurious output to the console during a VerifyVolume
562 job that contains encrypted data. It fixes bug #1024.
564 kes This patch prevents the 'status dir' command from trying to use a scratch
565 volume and possibly moving it from one pool to another. This patch fixes
568 kes Add new include to postgresql.c suggested by Marc Cousins so
569 that it compiles correctly with pgre version 8.3.
571 kes Fix --archivedir addition to configure. Replace it with
572 --with-archivedir in configure.in This fixes the regression
574 kes This patch fixes bug #1012 where the job is canceled because
575 of Max Run Time exceeded when the job has not yet started.
577 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
578 one 'part' to write. Instead of each part being stored on disk,
579 written to DVD, then deleted from disk, all parts are written to disk,
580 and only the last is written and deleted from disk.
581 kes This patch fixes the status command to include the formating string for
582 JS_AttrInsterting. It fixes bug #1021.
583 kes This patch should fix the Mac OS X build problem on the latest
584 Darwin, where sys/types.h was not included correctly (apparently
585 due to a change in the Mac headers). The solution was to explicitly
586 ensure that it is defined for the ./configure.
587 This patch also has a rebuild of configure that includes the Debian
588 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
589 kes This patch should ensure that queued messages to the console are
590 displayed as soon as possible. It should fix bug 1007, but has been
591 reported not to work.
593 kes This patch fixes the infinite loop when trying to increase the
594 maximum number of volumes in a Pool during the add command.
595 This patch fixes bug #1008.
597 Release Version 2.2.6
599 db Remove extra data on estimate command in joblist for bat.
601 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
602 really change anything, but is the beginning of doing it *right*.
603 To do it completely right the LastWritten date must be passed to
604 the SD, but it is not yet done.
605 kes Minor tweaks to some bat restore SQL.
606 kes This patch fixes bug #1003 where putting the message output from
607 a Verify job into the catalog results in a recursive loop. The problem
608 seems to show up only with postgresql (to be verified).
609 kes Correct %x to %p in postgresql debug statement.
611 kes Fix bug #942 where lots of emails where generated when the heartbeat
612 interval was low and Bacula wanted a different tape from the one in
615 ebl Add new SD despooling attributes and Dir inserting attributes
616 job status codes in the catalog (Status table).
618 ebl Use qmake-qt4 instead of qmake when available (debian system).
620 kes Add a security warning to src/cats/make_catalog_backup.in indicating
621 that passing the password via the command line (arg 3) is insecure.
622 This responds to bug #990 (it doesn't fix it).
624 kes Set default debug_level to zero. This corrects bugs #991 and #993.
625 kes Fix a crash in bat when it cannot connect to the Director for example
626 if the Director is not running.
627 kes Remove redundant INDEX (JobId) from File table in the trunk.
629 kes Make explicit exception to GPL in LICENSE to permit linking
630 the Win32 FD with Microsoft VSS code.
631 kes Apply the Solaris package patch from
632 Masopust, Christian <christian.masopust@siemens.com>
633 kes Apply the patch to optionally add a timestamp in the debug output
634 submitted by Mariusz Czulada <manieq@wp.eu>.
636 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
637 backend (sql_strerror). Fixes bug #989
639 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
640 It applied with no problems.
641 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
643 kes Redirect stderror to stdin on mt status command in mtx-changer.in
644 since the status is returned on stderr on Solaris.
645 kes Activate Close button on tray-monitor window. This fixes
647 kes Check for NULL item in parse_conf.c before calling it. In the
648 case of Device, there is no item and this caused a seg fault when
649 Device appears in the conf file.
650 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
651 avoids pulling in config.h multiple times in some new code.
653 kes Fix spurious warning message printed when creating a volume with
654 a LabelFormat. This fixes bug #976.
656 Release Version 2.2.5
658 kes Add JobId in place of Job name in all the Jmsg() output.
659 kes Correct the APP_DESC for the Win32 storage service (remove an e).
661 kes Make maxvol-test and new more strict maxvol2-test work.
662 kes Print JobId in all Jmsg() job output.
664 kes Add new SD despooling attributes and Dir inserting attributes
665 job status codes. This fixes bug 961.
666 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
668 kes Fix doc issue. This fixes bug #963.
669 kes Fix listing performance problems in bat. Pointed out by
671 kes Remove old debug code.
672 kes Fix bat code that tests for Win32. This should fix bug #968
673 kes Query 5 list wrong Vol after migration. This fixes bug #960
675 ebl Fix #969 where user can't change Replace option in restore menu.
677 kes Save jcr in thread specific data (tsd) for each thread.
678 kes Make Dmsg() print JobId as -%u.
679 kes Make Jmsg, Emsg, and others automatically pickup the jobid
680 for the thread if it exists.
681 kes Remove old reservation debug jid code.
682 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
683 ebl Add an option that permit to specify spool size in job
684 definition. (Applying patches/testing/spoolsize_per_job.patch).
685 You must upgrade SD and DIR at the same time.
686 dvl Add new configuration item --archivedir
687 dvl Adjust regression tests to use tmp not /tmp. This will allow
688 multiple concurrent runs of the regression tests.
690 kes Fix race condition that drops final block written to volume.
691 This happens in rare cases with multiple simultaneous jobs
692 when the Volume fills. This fixes bug #964. May be related
693 to bug #935 and possibly #903.
694 kes Eliminate more strerror() and replace with bstrerror().
695 kes Remove BSD getopt and replace with unrestricted IBM version.
696 kes Fix Win32 build for changed calling sequences.
697 kes More tweaks to the mount volume routines to get everything
698 right. Changed variable name from find to have_vol, which is
699 much easier to understand.
700 kes Enhance btimer debug code.
702 kes Fix FD->SD authorization failure, which was due to spurious
703 wakeups from a pthread_cond_timedwait(). Simply check the
704 predicate before continuing. This fixes bug #953.
705 kes Add const char where needed (more to do). Remove temp debug code.
707 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
708 kes Don't overwrite error message in check_tables_version.
710 kes Unlock batch insert tables with same calls used elsewhere.
711 kes Allow starting 59 jobs a second.
712 kes Make SD session key more random.
713 kes Add retry for SQLite opening db if it fails. Probably helps
715 kes Suppress extra error messages during batch insert failure.
717 kes Add jcr to timer packets so if killed message can be sent to job.
718 kes Add JobId to all Dmsg() output.
719 kes Put some FD auth code on dbglvl rather than fixed.
720 kes Return insert attributes error message in db msg buffer to avoid
721 false error messages. Helps fix bug #966.
722 kes Separate batch init error messages. Probably helps fix bug #966.
723 kes Make SD code that contructs attribute insert check string lengths
725 kes If Dir gets an error during inserting attributes, cancel SD.
726 This reduces unnecessary error messages.
728 kes Correct search boolean for getting Volume info
729 ebl Cleanup batch insert code. Probably fixes bug #965.
730 kes Back out one small change to the reservation system (reserving a volume).
731 kes Rework how a Volume is mounted. It is now much more intelligent and
732 will always attempt to use any mounted volume if possible and reduces
733 calls to the Director asking about volumes.
735 kes Turn off some code when batch insert not enabled.
736 kes Edit FD name in connect error messages.
737 kes Rework the reservation system to take into account that the Director
738 might give us a Volume that is different from the current one being
739 used, and to ensure that we don't exceed Maximum Volume Jobs.
740 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
741 fatal error with multiple jobs running'
742 kes Add more debug code in reservation system.
743 kes Implement maxvol-test to check bug #947.
745 kes Add code to handle tray monitor separated from Win32 FD.
746 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
748 kes Add missed return in fixing verify bug -- trunk only.
749 ebl Fix a command parser issue causing a director segfault.
750 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
752 kes Increase the max block size to 4MB fixes bug #957.
753 kes ERABT if user sets min block size > max block size. Fixes bug #956.
754 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
755 is not properly mounted (recognized) during a poll.
756 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
757 Job that has differences reports Verify OK.
758 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
760 ebl Add an option to operate on all pools with update vol parameters.
761 This complete the project 20. Patch from Nigel Stepp.
762 ebl Add history support to bconsole when using readline.
763 Using Ctrl-D to exit doesn't update .bconsole_history
764 kes Modify new volume algorithm to use max MediaId for generating next
765 volume number rather than the count of Volumes. This should essentially
766 eliminate the failure rate if some volumes were deleted. Bug #921.
767 kes Begin implemention of Optimize Job Scheduling.
768 kes Implement restore callback that Dirk and I agreed on for bat
769 restore. This fixes bug #928. Restore of backup of zero files fails.
770 kes Fix SQL Catalog logging which broke with new db_escape_string
773 Release Version 2.2.4
775 kes Fix bacula_cats.def for new db_escape_string().
776 kes Increase size of name string when FD making connection to SD.
777 May fix bug #953. FD->SD connection failure.
779 kes Add code to help Dan debug 2drive-incremental-2disk test.
780 kes Add code to try to fix bug #908.
781 kes Add waits to multiple exit detection code to try to force pid
782 file to always be deleted.
783 kes Restore good dev.tar.gz to rescue set appropriate binary property.
785 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
786 trying to switch drives by checking for blocking before unblocking.
788 kes Cancel storage daemon in all cases where FD reports error. This
789 should fix virtually all cases of bug #920.
790 kes Fix db_escape_string() for MySQL which did not compile.
792 kes Fix error message that was clobbered when Dir tells SD it does not
793 have write permission on Volume. This should fix a minor point
794 in bug #942, but not the main problem.
795 kes Add code to cancel job in SD if FD connection fails. This should
797 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
798 dvl Pass jcr and db into db_escape_string() to enable better escaping
800 kes Fix migration code to get correct Volume name with multiple volumes
801 by skipping |. Fixes bug #936.
802 kes Implement patch supplied by Landon to fix bug #944 where using
803 TLS with bconsole uses 99+% of the CPU.
804 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
806 kes Move patches into patches directory.
808 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
811 ebl Using 'm' in bconsole will show messages like before,
812 and not memory usage.
813 kes Fix bug #935, and probably also bug #903 where files were not
814 restored. MediaId was not properly set in JobMedia record after
817 kes Suppress chown and chmod error messages if the FD is not running
820 kes Apply Martin Simmons' patch that should turn off the new API usage
821 when batch insert is turned off allowing building on older
823 kes Add ./configure search in qwt-qt4 for qwt package
825 kes Bacula is now free of 3rd party GPL copyrighted code!
827 kes Add guid_to_name.c/h which replace idcache.
828 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
830 ebl Detect if new PosgreSQL batch insert API is present.
831 kes Correct incorrect mempool call causing Director crash. Occurs on
832 systems without va_copy().
833 sb Update spec files for 2.2.1 release
835 kes Fix memory pool call in ua_output.c. bug #934.
836 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
837 Add test program to fnmatch.c
839 kes Integrate patch to README.vc8 from
840 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
841 edit it to get it into Unix patch format.
842 kes Implement mkpath.c to replace old FSF makepath.c
844 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
846 Release Version 2.2.1
848 kes Update POTFILES.in
849 kes Cleanup a few underquoted AC_DEFUNs in configure
850 kes Apply patch from Martin Simmons that adds a test for va_copy to
853 kes Fix bug #921 by increasing the number of tries to create a new volume
855 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
856 can be called multiple times. Implement a version for machines
857 without va_copy() that gets a big buffer.
859 kes Integrate more portable zone offset code into bsmtp.c
860 Submitted by Attila Fülöp.
862 kes Fix bad SD->FD return status reported by
863 (James Harper) <james.harper@bendigoit.com.au>
864 ebl Fix a bug in read_close_session which return random status
865 thanks to James Harper
867 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
868 and directory names during restore of single file/directories.
869 kes Add sanity checks to .sql command when string is empty. Hopefully
870 that will resolve Dirks Director crash.
872 kes Apply patch submitted by Martin Simmons that corrects a seg fault
873 in the bsmtp chat subroutine when debug is >= 10.
875 kes Fix Director crash when running bat SQL queries.
876 kes Add David's notes on Item 8: Copy pools.
878 kes Rework projects file to be current and ready for a vote.
879 kes Enhance lex scanner error message.
881 kes Tweak LICENSE file to mention BSD code.
882 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
883 if specified on the ./configure.
884 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
885 This class is intended to allow us to open a second bsock to the
886 Director while in the restore subdialog.
888 kes Fix configure to create bat Makefile before creating dependencies.
889 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
890 kes Add a tooltip to the tray monitor.
891 dvl Set the Director's PID file before dropping privs. This fixes
894 kes Update AUTHORs file
895 kes Increase the default max concurrent jobs to 20 in FD and SD to
896 correspond with the default .conf files.
897 kes Rewrite the Win32 service routines. This eliminates the 3 copies
898 some different, of the same file created by RN when porting the
900 kes Rearrange some of the Win32 directories and the placement of the files
902 kes Set DEVELOPER flag in version.h
904 ========================================================================
905 Release Version 2.2.0
907 kes Apply a second doc patch from Marc.
908 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
909 improves the tips section that discusses how to setup multiple
912 kes Update bat README file.
913 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
914 corrects a typo in the Recycle status check in db_find_next_volume().
915 This will probably fix a number of annoying problems with multiple
917 kes Modify most of dird/msgchan.c to use bsock class calls rather than
918 bnet calls -- no functionality change.
920 kes Modify the Verify output to specify if files are missing on
921 the Volume(s) or disk. Fixes confusion in bug #916.
922 kes When more than one Volume is read in a migration job, the last
923 Volume bytes reported are from the last read volume rather than
924 the last written volume. Fixed. This fixes bug #910.
925 kes Fix display of Recycle flag after update volume=foo recycle=yes.
926 It previously printed New Recyle flag is: no. This fixes bug
929 kes Correct seg fault when switching tape drives during restore.
930 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
931 be used until after 2.2.0 release.
933 kes Remove fnmatch() in SD that permitted wild card specifications.
936 kes Fix %g in filename returned by SQL for browse tree reported by
938 kes Fix configure so that it puts config.out in the cwd rather than
940 kes Attempt to fix the locking problem reported by Eric in bug #906.
941 kes Make berrno class to leave errno unchanged after constructor call.
942 kes Make bnet_server use the heap rather than the stack to allocate
943 its socket fd pointers to avoid a crash at termination. Problem
944 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
946 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
947 and putting it in depkgs-qt along with Qt4.3.
949 kes Rework code in acquire.c that switches drives for reading when
950 the Media Type does not match. This should fix bug #906
952 ebl Fix a director segfault during job setup #907
953 kes Correct seg fault in postgresql when first operation returns no
954 rows. Fixes Dirks File browser problem seg fault with bat.
956 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
957 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
960 kes Implement PopUp YES/NO dialog for bat.
962 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
964 kes Correct RunScript to terminate job in FD on failure.
965 kes Change abort_on_error and AbortJobOnError to fail_on_error
966 and FailJobOnError in RunScripts.
967 kes Minor tweaks of code formating in RunScripts, principally to
968 avoid depassing 80 columns.
970 kes Eliminate one #ifdef Win32 in bsmtp
971 kes Implement grow tool to grow a file for testing very large databases.
972 kes Add big-vol-test to test Bacula seeking with > 5GB.
975 kes Modify find_next_volume() to return all values in Media record.
976 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
980 kes Update Release notes
982 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
983 Warning, in previous beta version, all media get from scratch keep their
986 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
987 This should fix bug #842. Made a note to look at removing the temp
988 files at the end of the install.
989 kes Add ability to mount and unmount a file device providing it is
990 marked as being removable and has the appropriate mount and unmount
991 commands defined in the Device resource. This fixes bug #830.
992 kes When applying a storage override, release all previous storage
993 definitions rather than just prepending the new storage.
994 This should prevent a good deal of confusion.
996 kes Implement ./configure search for qwt libraries.
998 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
999 Win32 FD. This should fix bug #893.
1000 kes Remove an unnecessary beep in Win32 init code.
1001 kes Update copyright dates in Win32 executable about boxes.
1002 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1003 code with a BSD getopt.c and getopt.h.
1004 kes Remove sched.h from the Win32 compat directory -- not used.
1005 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1006 need to shut it down, do it through the services panel or the command
1008 kes Remove some inappropriate Bacula FSFE copyrights.
1009 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1010 kes Fix regress config non-portable test as pointed out by
1011 Florian Heigl <florian.heigl@gmail.com>
1012 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1013 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1015 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1016 Reported by Frank Sweetser.
1020 kes Fix client-only build.
1021 kes Integrate client-only fixes for bsys (initgroups) and conio from
1022 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1023 kes Make arguments to get_scratch_volume() in same order as other
1025 kes Rework the prune_volumes() subroutine so that after purging and
1026 no volume found in desired pool, it will check for a scratch
1027 volume. This prevents recycling the whole scratch pool.
1028 kes Add code to status storage to print boffset_t (largefile support).
1030 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1031 kes You now need a --with-qwt=<dir> to be able to build bat.
1032 kes Update src/win32/cats/bacula_cats.def to include the new
1033 db_get_query_dbids() call on Win32.
1035 kes Correct a problem when selecting a scratch volume and moving
1036 it to another pool that lost some columns.
1037 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1038 kes Enhance Autochanger error messages to include Volume and device name.
1039 kes Rework prune_volumes() code to take account of InChanger flag,
1040 and to handle recycling volumes going to the Scratch pool and
1041 current pool because the RecyclePool directive.
1042 kes Implement a better and more efficient db_get_query_dbids() to
1043 handle creating and passing back a list of DBIds.
1047 kes Start work on new more efficient DBId subroutine. First use
1048 will be for recycling volume to Scratch inchanger.
1049 kes Increase number of JobIds in pruning from 1000 to 10000.
1050 This to be replaced by above routine.
1051 kes Begin implementation of building Qt4 on Win32.
1052 kes Correct typo in fix I added for bad TLS shutdown.
1053 kes Pull 2.0.3 patches into patches directory.
1054 kes Update Release notes. Include qt-console in line count.
1055 kes Update Projects file.
1057 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1058 bug in migration code where a job that spanned two volumes
1061 kes Implement new BST_DESPOOLING blocked state. Change from locking
1062 during despooling in SD to blocking. This means that other threads
1063 can work with the device structure, in particular the reservations
1064 system while despooling.
1066 kes Fix return in reservation message queue that missed clearing
1067 the jcr lock (implemented 26Jun07 below).
1068 kes Rename a number of dev methods to make locking function names
1070 kes Document locking in lock.c. Move lock structures to new file
1073 kes Move reservations message lock to lock jcr only this
1075 kes Move main SD locking code into lock.c (new file).
1076 kes Update Win32 build to include lock.c
1080 kes Dirk committed the qwt library code for drawing graphs in bat.
1081 kes Tweak install of qwt so that it is integrated with ./configure.
1083 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1084 out by Eric (my typo).
1085 ebl Fix configure.in to get batch mode enable
1086 kes Return correct string from authenticate.cpp in bat when connecting
1088 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1089 spurious line drops when using TLS.
1090 kes Do not file reparse points when restoring a file that already
1093 kes Implement Windows reparse points -- similar to directories, but
1094 we do not descend into it. This is a first cut. They seem to
1095 be backed up, but restore is not yet tested.
1096 kes Remove restore_blocking in tls code when shutting a socket to leave
1097 it in blocking mode. Hopefully this will fix the encryption bug
1098 reported by Frank Sweetser.
1099 kes When opening a file for backup, tell the OS that we are going to
1100 read it sequentially -- optimization.
1101 kes Change variable names in authenticate_director() to not conflict
1102 with member names in bat. Caused great confusion with compiler,
1105 kes Queue openssl error messages in case of comm problem.
1106 kes Do shutdown() call if socket terminated.
1107 kes Remove some duplicated code in tls.c
1108 kes Move more of the bsock member variables into private and access
1110 kes Add Frank Sweetser's tls-test to the regression suite.
1112 kes Add Swedish sv.po file
1114 kes Don't print clock skew message in FD if less than 3 seconds diff.
1115 kes Add a bit of VSS info to status client.
1116 kes Implement a first cut of Vista VSS, using Win2003 code.
1118 Release: 2.1.20 beta
1120 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1121 loaded tape but uses first drive).
1122 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1123 This was indeed a Win32 issue.
1125 kes Simplify search of autochanger for in-use Volume.
1126 kes Fix exit condition of check for in-use volume. kes Remove
1127 inappropriate my_postgresql_free_result() in db_close()
1129 kes Fix bad return in FD when encryption signature not found.
1130 Probably caused a crash.
1131 kes Inhibit missing encryption signature error messages for
1132 file types where no signature computed.
1133 kes Correct inverted check on autochanger in reservation system.
1134 kes Tweak debug code in autochanger reservation.
1136 kes Add some additional locking in the cats directory in subroutines
1137 that modify packet variables called from batch insert.
1138 kes Rework how dcrs are allocated. new_dcr() can now be called
1139 with an existing pointer, and it will simply clean it up.
1140 This allows the reservation system to test various different
1141 devices, and will permit easy device changes.
1142 kes A bunch of changes all over to handle new new_dcr() calling
1144 kes Work more on the Volume management in the SD. Remember Volumes
1145 for tape drives and for autochangers (even virtual disk changers).
1146 kes When looking at the Volume list to reserve a drive, handle
1147 autochanger names correctly by interating through the changer
1148 devices. Also call the Director to see if a Volume is suitable
1149 for the current job.
1150 kes Fix some bugs in bscan. Make sure all media records are written.
1151 Make sure that valid JobMedia records are written for disk files.
1152 Previously they were completely wrong.
1153 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1154 that the URLs don't change and so that the developers will all
1155 work off the same copy. Rebuild from scrach.
1156 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1158 Release: 2.1.18 beta
1160 kes Fix seg fault in FD from incorrect digest size.
1161 kes Fix argument to non-OpenSSL crypto.c subroutine.
1163 Release: 2.1.16 beta
1165 kes Remove a few malloc()s from the encryption code.
1166 kes Use the class calls to bsock in filed/backup.c and restore.c in
1167 place of the old bnet_xxx code.
1168 kes Implement code that does an on the fly calculation of the
1169 signing digest during restore of encrypted files. It makes
1170 a best guess at the algorithm, and if it is not correct, will
1171 then revert to the old code which reads the file after it is
1173 kes Implement at least one missing crypto stream in stream_to_ascii()
1174 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1175 #877 where a reload with bad syntax causes Dir to exit.
1177 Cut: 2.1.14 beta (not released)
1179 kes Do not free a volume on a tape drive until another volume is
1180 mounted and read, or the autochanger unloads the volume.
1181 This should help the SD re-use volumes that are already mounted,
1182 and should fix bug #886.
1183 kes Apply patch from user brettedgar that allows gnome2-console include
1184 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1185 kes Apply patch from Lucien Weller that fixes day of week calculation
1186 because of DST flag problem. Fixes bug #887.
1188 kes Move find_next_appendable_volume() to after acquiring a valid device
1189 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1191 kes Unable to reproduce bug 872. However added additional testing for
1193 kes Bug #874 resolved by documenting SQLite limitations.
1194 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1195 kes Bug #881 resolved by removing typo in mtx-changer script.
1196 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1197 approval. Added a link to the wiki on the web page, and implemented
1198 a backup from http://paramount.ind.wpi.edu
1200 kes Fix update allfrompool to pass pool name.
1202 kes Convert to pure GPL v2 license.
1203 kes Fix sscanf problems reported by Peter Buschman that caused
1204 a bus error on Solaris.
1205 kes Rework (simplify) the select prompt in bat.
1206 kes Move get_jobid_from_tid() into lib and create a
1208 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1209 should definitely fix the problem of lost error messages in the
1211 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1212 kes Eliminate tcpd.h from the project. Enclose the #include from the
1213 library with extern C ...
1214 kes Add print of signal name when a signal is trapped.
1216 Release: 2.1.12 beta
1218 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1220 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1221 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1222 makes SQLit3 run 30 times faster, though a bit less safe.
1223 kes Implement --with-batch-insert in configure and detection of thread
1224 safe libraries. It is on by default, but turned off if no thread
1225 safe library (e.g. SQLite 2) is available.
1227 kes Fix Bacula PostgreSQL buffer overruns.
1228 kes Do better checking for NULL results returned from PostgreSQL;
1229 implement retry for failed queries; clear results buffer after
1230 failed query. Hopefully this will correct the PostgreSQL failures.
1232 kes Implement algorithm to handle only one appendable volume with
1233 Prefer Mounted Volumes = no.
1234 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1235 returned from a query.
1236 kes Make volume lock recursive.
1237 kes Implement an additional volume reservation algorithm that
1238 starts by considering all reserved volumes then uses the
1239 old brute force algorithm of searching the resources to
1240 find a suitable device.
1241 kes Add new reservations debug code and refine the old code.
1242 kes Update the win32/dll/bacula.defs file.
1244 kes Tweak reservations algorithm to permit a few more cases, i.e.
1245 volume reserved, but on different drive, ...
1246 kes Enhance SD status to include Pool and Media Type for drive in a
1247 more readable format (a bit longer).
1248 kes Fix PostgreSQL double free.
1250 kes Minor refactoring of restore decryption code.
1251 kes Add code to smartall.c to detect double free of a buffer.
1253 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1254 so that bsmtp will create a correct email address (mailbox only).
1255 kes Modify 'memory' command so that the buffers are listed as 'In use'
1256 to avoid confusion with Orphaned buffers.
1257 kes I reworked the OpenSSL include/lib flags to be handled in
1258 the standard Bacula way, which should fix bug #863 concerning
1259 non-standard OpenSSL libraries.
1261 kes Implement Help Browser window for bat.
1262 kes Fix reload bug that reset StorageId to zero.
1264 kes Fix TLS #ifdefing when TLS turned off.
1265 kes Ensure that when labelling a tape with Slot=0 that InChanger
1267 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1269 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1270 add DISTINCT (required by PostgreSQL).
1271 kes Implement BSOCK authenticate_director() method. Eventually will
1272 authenicate all daemons.
1273 kes Move several more functions into the BSOCK class.
1275 kes Add code to tell the OS that we no longer need a cached
1276 file that we were reading. In findlib/bfile.c. Also,
1277 only cache files that we are reading. Thanks to
1278 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1279 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1280 kes Implement script to automatically generate cats and dll .def
1281 files for Win32 dll.
1282 kes Update README.mingw32 to include new .def file generation.
1283 kes Correct typo in UTF-8 error message as reported by:
1284 jhernandez <julianhernandez@gmail.com>
1285 kes Add additional sm_check() code on debug level 1.
1286 kes Set default debug level to 1.
1287 kes Trap SIGABRT in attempt to get traceback.
1289 kes Reduce bat connect timeout from 30 to 15 seconds.
1290 kes More restructuring and implementing BSOCK class in place of
1292 kes Remove a few unnecessary malloc() tests in crypto code.
1293 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1294 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1295 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1297 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1299 kes Fix Verify InitCatalog. The attributes were not pointing to the
1300 correct saved location.
1301 kes Implement message callback so that GUI is sure to get all
1302 daemon messages. Currently displayed in a dialog in bat.
1303 kes Ignore SIGUSR2 (Bacula timer) in bat.
1304 kes Apply regress patch from bug #859 to allow regress to work
1305 with Solaris compiler.
1307 kes Begin adding TLS support to bat.
1308 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1309 clean up lex.c and make it more readable.
1311 kes Move more bnet functions into the BSOCK class.
1312 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1313 kes Complete change of berrno strerror() method to bstrerror()
1315 Release: 2.1.10 beta
1317 kes Cleanup incorrect email addresses in bsmtp.
1318 kes Make bat display initial messages rather than discard them.
1320 kes First cut of adding .mod to the run command.
1321 kes Implement auto display of messages in bat.
1322 kes Enhanced preferences to allow all Bacula output to be
1325 kes Try to make bsmtp date routines more generic.
1326 kes Fixed bug #856 autochanger documentation.
1327 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1328 kes Add new cats entry point so Win32 builds.
1330 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1332 kes Do better checking for the MySQL 64 bit libraries looking for both
1333 .a and .so libraries.
1334 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1335 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1336 kes Require the thread safe version of MySQL during configure. Thanks
1337 to Andre Noll for pointing this out.
1338 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1339 continuing in migration code.
1340 kes Apply implementation of tray-monitor font derived from gnome-console
1341 submitted by Andreas Piesk <a.piesk@gmx.net>
1343 kes Eliminate important memory loss in SQLite
1344 kes Fixed the batch insert MySQL thread specific data that was not
1345 being freed. See cats/mysql.c:db_thread_cleanup().
1346 kes Fix restore before command.
1347 kes Convert old hdr.name to name() in a few places.
1348 kes Implement update jobid command.
1349 kes Return all time_t dates in db_get_job_record()
1350 kes Stop watchdog in SD earlier.
1351 kes Put Pool just after Storage in please mount message.
1352 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1355 kes Update the po files.
1356 kes Fix Verify InitCatalog by making it cache attributes.
1358 kes Change name bacula-bat to bat for man 1 page to correspond to
1360 kes Check for client and store NULL pointers in status command. This
1362 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1363 kes Fix sign extended editing of %p.
1364 kes Clean out a little old #ifdefing in cats/mysql.c
1366 kes If time diff between DIR and FD is more than 600 seconds convert
1367 INFO message to WARNING.
1368 kes Implement heap size display in status for all daemons.
1369 kes Attempt to fix MySQL db open memory loss (not successfull).
1370 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1371 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1372 Query. This looks like a MySQL but but by doing extra releases,
1373 the memory goes away. This should fix bug #847.
1375 kes When backup fails, cancel SD before waiting for sd termination.
1376 kes If SD is waiting for FD to connect during cancel, wake up the
1378 kes Fix fsf code so that errno is correctly reported.
1379 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1381 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1382 so that Bacula doesn't later stumble into a seg fault.
1383 kes Use the term Restore Client in the restore Job report.
1384 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1385 the original job's FileSetId.
1386 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1387 spooling in migration jobs. Not yet tested.
1388 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1389 reading conf file from a pipe. However, do it with open_bpipe()
1390 rather than popen. Not yet tested.
1392 kes Fix an ugly bug where the VolCatBytes were getting updated
1394 kes Implement bconsole memory command that prints current memory
1395 usage, plus smartalloc dump.
1396 kes Clarify some error messages in backup, admin, and migrate.
1397 kes Shrink label dialog to smaller size.
1398 kes Invert Cancel OK buttons on restore to be OK Cancel.
1399 kes More strerror() to bstrerror() conversions.
1401 kes Start implementing bstrerror() in place of strerror().
1402 kes Stripping path -- seems to work.
1404 kes Prevent door and port files from being restored (mostly
1406 kes Free an unreleased buffer in compat code.
1407 kes Change console Job name from *Console* to -Console- to eliminate
1408 Win32 filename problems. Put Win32 path separator when creating
1409 Console file. This fixes bug #846.
1410 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1412 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1414 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1415 to force Win32 error message.
1417 kes First cut strip path. The data should be passed to the FD,
1418 but nothing is done with it yet.
1419 kes Enhance the digest and signature routines in the crypto
1420 library to accept a JCR and to use it to print error messages
1421 so that they will go in the Job report rather than the daemon's
1423 kes Simplify some of the verify signature code.
1424 kes Simplify a few of the alternative returns in the signature
1427 ebl Use only POSIX regex instead of GNU regex in breg.c for
1428 File relocation. It fix broken freebsd compilation.
1429 kes Convert all other Dir files to use new ua class message
1431 kes Tentative fix for missing digest signature in bug 807.
1432 kes Correct handle problem in new win32_ftruncate routine.
1433 kes Convert ua_purge.c and ua_update.c to use new ua class
1434 message routines for bat.
1436 kes Correct incorrect installation of LICENSE in Win32 installer.
1437 kes Display LICENSE at the beginning of the Win32 install.
1438 kes Attempt to correct the need for the png files to be installed
1440 kes Reapply my bat.conf install script in qt-console. I think I
1441 editted bat.pro instead of bat.pro.in and it was lost.
1442 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1443 the /var/lock/subsys for subsysdir. Also corrects typos in the
1446 kes First cut update job.
1447 kes Correct configure to include qmake of src/qt-console directory.
1449 kes Make restore job yes/mod/no print in one command so GUI works.
1450 kes First cut implementing backup and restore client.
1451 kes Correct editing in Verify output that caused a seg fault.
1453 kes Insure that bat.conf is not overwritten during installation.
1454 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1455 while I was implementing migration in March 2006 !
1457 ebl Cleanup file relocation, using char *RegexWhere instead of
1458 char *where + bool where_use_regexp
1459 kes Update some manpages and add bat manpage.
1460 kes Make a first cut at converting bacula.spec.in for bwx-console
1462 kes Apply patch from John Goerzen to add hostname as fourth argument
1463 to make_catalog_backup script.
1464 kes Fix typos I introduced into bsmtp.c
1465 kes Make pm_strxxx() routines handle input of NULL pointer. This
1466 is to protect from NULL pointers returned from SQL databases.
1467 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1468 kes Add more debug to FIFO code -- fix fifo regression test.
1470 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1471 kes Add thread timer to bnet_connect() to break from OS if wait time
1474 kes Update Win32 build to include new files, new symbols, and
1476 kes Implement socket level heartbeat (tcp_keepidle)
1477 ebl Commit File relocation patch
1478 kes Make bat have 'make install' target.
1479 kes Warn during install if old gnome-console binary found.
1480 kes Warn during install if old wx-console binary found.
1481 kes Add -8 option to bsmtp command line to add content type utf-8.
1482 Fixes bug #809. (Character coding problem in bsmtp).
1483 kes If < is found in target (from, to, cc) then do not enclose the
1484 target in < > in bsmtp. Fixes bug #772 (malformed address).
1485 kes When printing certain items in dbcheck, stop after 300000.
1486 Fixes bug #822. (dbcheck loops).
1487 kes Incorrect status in Dir after waiting for mount with poll set.
1490 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1492 kes Print waiting to reserve a device every 5 mins.
1494 kes Don't call close_part in label.c if tape and relabel.
1495 kes Don't free volume if busy in close() -- should help with
1497 ebl Fix #824 RunScript bug (After script could be execute twice)
1498 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1499 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1500 Add a regression script to test RunScript
1502 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1505 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1506 deprecated. No additional bugs will be fixed, and they will be dropped
1507 in a future release (probably 2.4.0).
1508 kes Change name of wx-console to bwx-console to make it more Bacula
1510 kes Change the name of gnome-console to bgnome-console to make it
1513 kes Some time in March, a Feature Request with patch from Jorj Bauer
1514 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1516 The ability for the director to validate a Client (FD) CN against
1517 an arbitrary set of patterns rather than the hostname, with
1518 A new 'TLS Allowed CN' set of directives which are implemented
1519 in the Client resource. Then pattern matching is used in place
1520 of hostname matching against the Certificate's CN. As an example, we
1521 have certificates which (a) use a local CA, and (b) have a CN of the
1523 kes Add new/changed entry points to Win32 build
1524 kes Create unaccepted-projects for projects that are not accepted.
1525 kes Simplify locking in the reservations system.
1526 kes Add more debug code in reservations.
1527 kes Make sure error condition on reserving a volume is handled correctly.
1528 kes Correct handling of volume_in_use.
1529 kes Correct handling of initializing a device.
1530 kes Move handling of broadcasting releasing a device into release_device().
1531 kes Correct attaching dcr to dev so that it is only done if device
1532 is properly initiated.
1534 kes Locking debug level tweaks in SD.
1535 kes Tweak new Volume code.
1537 kes Add exec external-command [wait-seconds] to bconsole. This
1538 executes the external-command. Note! normally external-command
1539 should be enclosed in double quotes.
1540 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1541 it should normally be off in a production system.
1543 kes Implement die command for SD so that we can force it to dump.
1544 kes Implement SD lock debug code.
1545 kes Implement new algorithm for keeping Volume list in SD. It
1546 is now owned by the device.
1548 kes Implement new code for freeing in use volumes that should
1549 resolve if not all, some of the problems of multiple drive
1550 tape conflicts described in bug 801.
1552 kes Fix gui/bacula-web/images files in svn.
1553 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1555 ebl Fix a bug in batch mode (in string escape)
1556 kes Correct migration prune SQL typo that crept in in a
1557 recent 2.1.x change.
1559 kes Move bnet_despool() into class in bsock.c
1560 kes Modify job report to include director name and Build OS.
1561 kes Move drop root privilege and check_catalog() before fork.
1562 kes Add update database scripts (version 9 to 10) to updatedb directory.
1564 ebl Check size and age of each file after its backup to see if
1565 it has changed during backup, if 'checkfilechanges' is set.
1566 The FD will do an extra check (stat(2)) after
1567 each file backup. mtime, ctime and size are compared with
1568 'before backup' information. If time or size mismatch, an
1569 error message will be generated. You must upgrade FD to use it.
1571 kes Make database name and user configurable
1572 --with-db-name=xxx --with-db-user=xxx
1573 kes Add back database type to message.c for debugging.
1575 kes Implement dir_sql() which issues an SQL query.
1576 kes Modify bat medialist to use dir_sql() and do some minor C++
1577 formatting as well as eliminating a number of pointers, simplifing
1580 kes Fix some of the mtx-changer grep commands for tape label readers.
1581 kes Convert a number of bsendmsg into the appropriate send/warning/error
1582 message class calls.
1583 kes Suppress the using database message in the .sql command.
1584 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1586 kes Add context menu for floating a window.
1587 kes Some minor cleanup and name changes in qt-console
1588 kes Add doing mt setblk 0 in Win32 mtx-changer.
1589 kes Apply Martin's bug fix to move definition of ENODATA for
1591 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1592 sqlite2 and sqlite3.
1594 kes More pruning cleanup.
1595 kes Turn on wait_for_drive by default in mtx-changer.
1596 kes Turn on Batch insert code by default as it now passes regression.
1597 kes Add ./configure --enable-bat to enable building of Bat.
1598 No install yet though.
1600 kes Implement a new .sql command for bat.
1601 kes Implement code to turn off pruning in obtaining the next volume.
1602 Pruning is turned off for the status dir command, but turned on
1603 for SD requests and for the list nextvolume command.
1605 kes Correct Qmsg() that was not updated correctly when committing a
1606 previous change (probably the recent TLS patch).
1608 kes Write new subroutine is_volume_purged() that explicitly checks
1609 if the Volume is purged, and if so marks it as such. This should
1610 resolve problems reported about needing to mount twice to recycle
1612 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1613 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1614 amount of duplicated code.
1615 kes Do volume pruning only for the Media Type desired (reduces pruning time
1616 if multiple Media Types are in the same pool).
1617 kes Implement more detailed info in the Job report for the Bacula version
1619 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1621 ebl Add bbatch tool to bench database and insert mode.
1622 Fix sql quote stuff in batch mode
1623 Fix sql stuff for mysql
1625 kes Correct problems with am/pm scheduling. Fixes bug #808.
1626 kes Implement new prunning code that prunes up to 1000 jobs at
1627 the same time. The same technique can be applied to a number
1628 of other prune/purge subroutines.
1629 kes Add an insanity check when starting a new tape job to ensure
1630 that the tape position has not been changed. If so fail the
1632 kes Fix Win32 build for dlls to add the folllowing:
1633 src/lib/bsock.c -- new file with new entry points
1634 src/lib/dlist.c -- new entry points
1635 src/cats/sql_create.c -- new entry point
1636 src/cats/sql_cmds.c -- new DATA item exported
1638 ebl batch mode cleanup bscan-test is ok now.
1639 kes Implement SD code to check length of disk volume before appending.
1641 kes Correct return status on db_batch... routines.
1642 kes Add call to db_write_batch_file_records() to migration code.
1643 ebl Fix AfterJob timing
1644 kes Move the checking of the database in initializion of the Director
1645 to after we drop privileges. This avoids the need for both root
1646 and bacula access to the DB.
1647 kes Correct a misplaced variable definition in src/filed/backup.c
1648 kes Correct how the new batch insert db_create_attributes_record()
1649 uses the arguments. Caused a seg fault in bscan.
1650 kes Implement lock() and unlock() methods in DEVICE class.
1651 Implement block() and set_block(xx) methods in DEVICE class.
1652 kes Modify bnet_connect() so that it uses time() to check for the
1653 wait time expiring (on some OSes, some system calls may not
1654 return immediately).
1655 kes Modify Verify to obtain the previous JobId when it is actually
1656 running rather than at schedule time (as it was in 1.38.x).
1657 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1659 kes When checking pid in pid file, continue running if the pid is
1660 the same as ours. This occurs on IRIX after a system crash.
1663 kes Extend new GUI API.
1664 kes Make the ua structure a class, and implement send_msg(),
1665 error_msg(), warning_msg(), and info_msg().
1667 kes Apply fix from for building wx-console on the Mac from
1669 kes Implement new select mechanism for GUI programs.
1670 kes Reorganize initialization of stackedWidgets in bat.
1672 kes Add updated nagios plugin supplied by Christian Masopust.
1674 kes More bat implementation.
1675 kes File migrate bug with Pool Occupancy using mediaid instead
1676 of jobids. Fixes bug #795.
1677 kes Fix orphaned buffers in filed backup and verify due to
1678 crypto buffers not freed during errors. Fixes bug #789.
1679 kes Extend new GUI api code to tree commands.
1680 kes Ensure that tree and dot commands check console ACLs.
1681 kes Permit marking directory with trailing slash.
1682 kes Allow 20 console connections (instead of only 10).
1684 kes Add smartctl call to bacula-sd.conf as an example of getting
1687 kes Modify jobq.c to let simultaneous restore jobs run. This may
1688 cause them to fail if they cannot get a drive.
1689 kes Add Client Connect Wait to Storage daemon to permit users to
1690 modify the time the SD waits for a FD connection.
1692 kes Correct virtual changer check which was backwards. This caused
1693 volumes to be unloaded into slots already occupied.
1695 kes Apply Command ACL filter to JobId list in restore command.
1696 kes Correct typeo in var.c patch.
1698 kes Don't let Bacula prune File or Job records for the current Job.
1699 kes Fix variable substitution pad + inc bug reported (with patch)
1702 kes Correct SQLite log table index as reported by Luca Berra.
1704 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1706 kes Begin implementing new comm signals for API.
1707 kes Fix a few places in lib/message.c where the open fd may
1709 kes Continue implementing lib/bsock.c (real class). Make jcr,
1710 who, host, and port private. There are new methods to access
1711 them for non-class use. This required touching a number of files.
1713 kes Add LANG=C to autoconf/randpass so it works with languages other
1714 than English. Fixes bug #788.
1716 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1718 You will not be able to generate Include/Exclude list any more.
1719 It will be fixed soon.
1720 If you want to use this, you can apply
1721 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1723 kes Restore of sockets created false error messages because Bacula
1724 no longer restores sockets, but the code was still trying to
1725 set the attributes on a non-existent file. Reported by a user.
1726 ebl finish RecyclePool feature
1727 Media will takes Pool.RecyclePool
1728 when moving from Scratch to a Pool or when user will do
1729 update volume=xxx frompool
1730 To use it, add RecyclePool = aPool to your Pool resource
1733 RecyclePool = Scratch
1737 kes Expand new BSOCK class adding signal() and new BNET signals.
1738 kes Begin enhancing the dot commands adding a new API function
1739 that returns more information and will make it easier
1740 to interface to the Director from a program.
1742 kes Make DEVICE fd private. Its new name is m_fd, and can be
1743 obtained with dev->fd() outside the class. This is the
1744 first of many DEVICE members to be made private.
1745 kes Implement Michael Renner's idea on having a virtual disk
1746 changer. I made some minor modifications (e.g. I did not
1747 implement the Virtual Changer directive, but simply set
1748 the Changer Command to an empty string.
1750 kes Implement a BSOCK send() method that writes the whole record
1751 in a single write() request rather than in two.
1752 ebl add update volume=xxx recyclepool=yyyy
1753 volume takes recyclepool from pool when using update volume=xxx from pool
1755 kes Fix encryption deblocking bug, which caused some restored files
1756 to be truncated. This fixes bug #763.
1757 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1758 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1760 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1761 ebl Use btime_t instead of uint64_t in media patch.
1763 kes Optimize the use of the database a bit in the Status dir command.
1764 Only open it when needed, ensure that if any previous database
1765 was opened, it is closed.
1767 kes Correct VolCatBytes bug from media patch.
1768 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1769 in the case of orphaned records.
1770 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1771 and File records in 300K chunks to be more efficient. This
1772 idea came from Juan Luis Frances (if I remember right).
1773 kes Apply Eric's scratch patch that moves a purged Volume to
1774 the RecyclePool. Question: how is RecyclePool set? what
1775 happens to the ScratchPool?
1776 kes Apply Eric's media patch that collects read/write media
1777 times as well as byte counts. This patch requires a
1778 simultaneous upgrade of the DIR and SD. Note, there
1779 should be some way to turn off timing. I'm not sure
1780 times are in Bacula units.
1781 kes Apply Eric's batch-insert patch.
1783 kes Update projects list.
1785 kes Implement Include/Exclude file lists in FD as dlists using
1786 the new dlistString class. This permits efficiently having
1787 large include/exclude lists and completes project Item 25.
1788 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1789 console is authorized to cancel the job. This fixes bug
1791 kes Modify SD so that the VolCatJobs medium record is updated
1792 at the beginning of a Job rather than the end. This
1793 fixes bug #775 where exceeding MaxVolJobs caused jobs
1795 kes Added a mutex around getting and setting Volume information
1796 so that multiple simultaneous jobs will single thread.
1798 Switch to using Subversion
1799 kes Remove src/pygtk-console/ from configure
1801 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1802 plus the entrypoints.
1803 kes Apply patch supplied that corrects debug print
1804 in canceling jobs for max run time. Supplied as
1805 part of bug #621, which was previously fixed.
1807 kes Test on job_canceled() and sd_msg_thread_done inside
1808 loop starting the message thread to avoid a race condition.
1810 kes Remove rl_catch_signal from console.c as it conflicted
1811 with the header definition. Fixes bug #765.
1812 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1814 kes Clarify some stored/acquire messages to indicate if the
1815 problem is with read or append.
1817 kes Fix memory leak with storage ids in cats/sql_get.c
1818 kes Terminate watchdog earlier to avoid reference to released
1819 memory -- reported by Jason Austin.
1820 kes Move closing the database from jobq.c to the director daemon
1821 termination routine. This fixes memory leaks for shadow jobs
1822 (i.e. migration jobs).
1823 kes Free up the unique jobid chain items in migrate.c. This fixes
1824 a memory leak problem.
1825 kes Convert some ugly looking for statements to use foreach_alist
1826 in findlib/find.c. This will facilitate converting the structures
1827 to use dlist (for large include/exclude lists).
1828 kes Fix a bug in the btree.c and btree.h routines, then rename them
1829 rblist and add them to be built in src/lib. Include some new
1830 methods written by Rudolf Cejka that make the code more readable
1831 (hides some of the ugly casting).
1832 kes Add set_next() and set_prev() methods which make the code much more
1833 readable. Also add a new dlistString class that facilitates storing
1834 strings in dlists. To be used in the large include/exclude lists.
1835 kes Make some trivial modifications to lib/tree.h that use rblist
1836 rather than dlist for storing the tree links. This was suggested
1837 by Rudolf Cejka. The result of this is that the restore tree now
1838 uses red-black binary trees rather than simple linked lists. This
1839 should give rather dramatic speed improvements for directories
1840 contining large numbers of directories/files (more than 10000).
1842 kes Fix maxruntime bug #621.
1844 ebl Implement the include JobID in spool file name project.
1845 kes Reorder projects file in order determined by Jan 2007 vote.
1846 kes Implement item #12 on project list -- quick release of FD by
1848 kes Fix open of SQLite3 db where user does not have write permission
1849 so that DIR does not crash. Fixes bug #761.
1851 kes Add back missing @ in Win32 Makefile.
1852 kes Change 'Device not configured to autolabel' from INFO
1854 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1855 which should restart an indefinite # of times.
1856 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1857 other DIR specifications.
1859 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1860 Fix path quoting in SQLite scripts.
1861 Fix problems with SHGetFolderPath.
1863 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1865 kes Fix Job restart on error bug that promotes an Inc to a Full
1866 backup. This should fix bug #755.
1867 kes Add qt-console and first cut of code.
1871 kes Fix Bacula->Documentation link on Win32 to point to index.html
1872 instead of bacula.html. Fixed bug #750.
1873 kes Return JobId in db_get_job_record() when JobId==0. This should
1875 kes Do not release source pointers when restarting a failed job.
1877 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1878 This *should* fix bug #747.
1879 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1882 kes Modify USTORE constructor to set an empty store_source string,
1883 and don't copy the store_source string in a cancel. Hopefully
1884 this will fix Arno's seg fault, bug #744.
1885 kes Add back code to disable conio in configure. Fixes bug #743.
1886 kes Correct the Options scanner in the FD to correctly handle
1887 SHA1 option, which was eating the next option. Reported by
1889 kes Add code to indicate when the SD is spooling, spool wait, and
1890 despooling as requested by Alan Brown.
1892 Version 2.0.0 released: 4 January 2007