1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
31 separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
36 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
38 kes Make the default bat restore Pool be Any. This fixes bug #1118.
40 kes Remove debug statement that crashes the SD at the end of
41 a tape during restore. Fixes bug #1125.
43 kes Implement Win32 bat changes made to Branch-2.4
45 kes Tweak separator command in console to start disabled and
46 allow defining no separator character. Also make code a
47 bit more fault tolerant.
48 kes Make btraceback write the traceback to the working directory
49 before attempting to mail it.
50 kes Add a RFC to Projects.
52 kes Attempt to implement a kludge to make Qt work with bat
54 kes Setup rstorage correctly. Virtual backups are working.
56 kes Move setting JobLevel and JobType into a method, which should
57 allow completing Virtual Backups.
58 kes Fix verify jobs to work again.
60 kes Virtual Backup tweaks -- it is close to working.
62 kes Ensure that SD tried to mount a volume not in an autochanger
63 at least once before asking for operator intervention.
64 kes Make SD aware of Virtual Backup jobs.
65 kes Add VirtualFull for bat.
66 kes Changes to get read storage correct for Virtual Backup.
68 kes Remove old code from label.c
69 kes Split display_display_info() out of write_bsr_file()
70 kes do_vbackup_init() working -- i.e. bootstrap file built.
71 kes Change Bacula trademark owner from John Walker to Kern Sibbald
72 kes First non-working cut of vbackup
73 kes Correct FD heartbeat code to use volatile variable accessed by
75 kes Zero thread id with memset if on Win32 in case it is a struct.
76 kes If cannot create JobMedia record, continue to try to write eof
77 and clean up in block.c
79 kes Add code to interface OpenSSL to new Win32 pthreads code which
80 used a structure for thread_t.
82 ebl tweak bat for win32 compilation
84 ebl Remove tokyo cabinet from the source
85 ebl Update configure/autoconf to support berkeley DB
86 ebl Add a sort to db_get_file_list() to improve bsr construction time.
88 kes Add a mtx-changer.conf file that is not overwritten during
89 an upgrade. It fully configures the mtx-changer script.
90 kes Clear in-use bit on vol when unused while swapping.
92 kes Remove sleep at end of ./bacula
93 kes Clear hash packet for hardlinked files correctly. This corrects
94 a long standing bug where hardlinked files selected individually
95 would occasionally not be restored.
97 kes Apply Eric's patch to ensure that autoprune does not return
98 a Volume not in the autochanger unless requested to do so.
99 kes Correct bat restore display of multiple drives. This fixes
101 kes Do find_a_volume() each time an unload is done. This
102 fixes the failure of maxvol2-test.
104 kes Add some SD debug code.
105 kes Do find_a_volume() each time an unload is done.
106 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
107 and adds --with-db-port to ./configure.
108 kes Use Qmsg() in job.c watchdog callback.
110 kes Release main control rwlock if ABORTing.
111 kes Make watchdog connect timeout queue messages rather than sending
112 directly to avoid lock conflicts with the real thread.
113 kes Add const char in dbd.c to avoid compiler warnings.
114 kes Fix python compiler string warning. Note, IMO the GNU C++
115 compiler guys have made a *very* bad change to their compiler.
116 They now force all strings to be 'const' unless you explicitly
117 cast them, which is extremely ugly and ruins nice code as well
118 as creates a lot of useless work.
120 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
121 mt. This fixes bug #1116.
122 kes Add const in python files to reduce compiler warnings.
123 This may have to be backed out because of later compiler
125 kes Fix failure of 2drive-concurrent-test. Always read label;
126 clear_unload() only after drive is defined in acquire_for_read().
128 kes Generally clean up the manual tape loading code. The main
129 conceptual change is that when a volume is marked to be unloaded,
130 its volume name is retained, and it is only marked as unloaded
131 when either the autoloader says it is unloaded or another tape
132 is read on that drive.
134 kes Add debug code and refactor subroutine in stored/mount.c
135 kes Fix format problem in bscan output reported in bug #1105.
136 ebl Fix get_next_volume_for_append logic with autochanger
137 - use pruned volumes if found
138 - don't reset the inchanger flag after getting a recycled volume
140 Fix recycle_oldest_purged_volume to take InChanger flag in account
142 ebl Add mmap/unmmap implementation for tokyodbm under win32
144 kes Make first step toward eliminating globals from config
145 scanning. Also should be a workaround for FORTIFY_SOURCE
146 GNU C bug -- fixes bug #1042.
148 kes Apply duplicate job tests to restarted jobs.
149 kes Copy more data when restarting a job so that run
150 overrides are kept. This should fix bug #1094.
152 kes More word alignment cleanup.
153 kes Fix bug where SD did not ask operator if the device could not
154 be opened. Reported by Eric.
156 kes Add dbuser to DIR conf file (replaces user).
157 kes Add --with-db-password to ./configure
158 kes Fix regress to handle db_password.
159 ebl Add new "status storage slots" that list autochanger
161 ebl Update vtape driver to compile only under Linux.
162 ebl Fix a bug when restoring with a wrong mediatype.
164 kes Eliminate ints from conf files and structures to avoid
165 word alignment problems
167 kes Fix bug reported by Scott Barninger where the bacula script
168 refers to scripts in the wrong directory. Needed to meet the
169 requirements of recent FHS location changes.
170 ebl Disable vtape for FreeBSD.
172 ebl Modify disk-changer to check if slot contains something before
175 ebl Fix vtape on win32 and debian.
176 ebl Fix autoselect patch (cause segfault).
178 ebl Fix autoselect option broken for a while. Fix #1089. Need some
179 work with StorageId to be able to use a particular drive in a
182 ebl Rename vtape to vtape.
183 ebl Update vtape driver.
185 ebl Modify vtape driver to avoid sparse file.
186 kes Add make clean of qt-source directory during ./configure
187 kes Store last block number written to tape in DEVICE and
188 use it for testing for correct last block on EOT.
190 Release Version 2.4.0:
194 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
195 This fixes bug #1095.
197 kes Add create_postgresql_database.sql to Win32 installer. Should
198 fix problem reported by Juilio Monteiro.
199 kes Get correct slot when auto unloading a device. This fixes bug
202 kes Fix multiple media restore.
203 kes Make DEVICE Slot private and access it via a method.
204 Allows better control over when it is set and cleared.
205 kes Fix possible seg fault if SQL error.
207 kes Add Martin's fixes to argument scanning for the estimate
208 command. This fixes bug #1093.
209 kes Add debug code to SD.
210 kes Fix renaming a Volume, which used the wrong Volume name.
212 kes If operator has rewind tape, print warning, release tape and
213 try once more. If tape is positioned somewhere, something went
214 wrong, so mark the tape in error and try once more. Previously
215 this error was fatal, now it produces an error message.
216 kes Ensure correct volume name displayed during restore
217 kes Ensure that Volume is mounted for restore.
219 kes Fix a few more Coverity reported problems.
221 kes Apply Allan Black's status dir job count patch.
222 ebl Add information about IMPORT/EXPORT slots in mtx-script.
223 kes Enhance a couple of SD debug messages.
224 kes Tweak unload flag setting and ensure it is set during swap.
226 ebl Fix #1091 about bad output in estimate command.
228 kes Modify autochanger locking to attempt to avoid race
230 kes Make sure device not busy before doing label command.
231 kes Display open() errors except when polling. Previously too
232 many were suppressed. This should fix bug #1070.
233 kes Fix Win32 reparse points. Bacula will not recurse into any
234 reparse point directory, including mount points, unless the
235 directory is explicitly mentioned at the top level (same as
236 with Unix). A file that is linked to another file will be
237 backed up -- much as Unix does for hardlinked files.
238 This fixes bug #1041.
240 kes Remove double quotes from ChangeLog and ReleaseNotes
241 kes Remove StorageId test when pruning and recycling (Eric's changes).
242 kes Remove old form of locking when getting volumes -- causes deadlock.
243 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
244 the name unique and to eliminate compile time error.
245 kes Add accurate.o to Win32 FD Makefile
247 kes Fix cats dll build on Win32 after db_update_job_end_record
248 calling sequence change.
249 ebl Switch to tokyo dbm instead of htable in accurate code
250 ebl Include tokyo dbm to bacula source tree
252 kes Fix buffer overruns detected by Coverity.
254 kes Tweak joblog display.
256 kes Implement --without-qwt
257 kes Fix layout of restore tree dialog
258 kes Add configure bat QWT libraries, so that bat can be built
259 with or without the QWT libaries.
261 ebl Add dummy tape driver for regression tests.
262 kes Make sure we unload the right slot when swapping.
264 kes Add debug times, reduce size of two-pool-changer test
266 ebl Tweak autoconf scripts for vtape
268 kes Improve SD reserve debug code.
269 kes Testing an improvement to free up volumes no longer in use.
271 kes Rework SD acquire for read to handle autochanger Volume
273 kes Implement regression that explicitly tests swapping a Volume
274 from one drive to another.
275 kes Enhance disk-changer to detect most error conditions.
276 kes Fix SD code so that it properly swaps a Volume between drives.
277 This fixes bug #1083.
279 kes Apply libdbi patch from Joao Freitas for regress and for
280 Bacula trunk. Regress now works with libdbi. Nice.
281 kes Apply .nobackup patch from bug #1077 submitted by
283 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
284 name into jobs cloned via the run directive.
286 kes Prevent a Volume that is being swapped from being freed from
287 the volume list. This will most likely fix, at least partially,
289 kes Fix strippath so that it does not get a buffer overrun and crash FD.
290 This fixes bug #1078.
291 kes Remove 50 millisec wait in SD that broke debugger.
292 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
293 that a job may run, counted from when the job was scheduled.
294 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
295 a job may block waiting for a resource, counted from when the job starts
296 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
297 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
298 that implements multiple commands per line in the console when using
299 readline. Modify the default to use a semicolon as the command separator.
301 ebl Fix SQL query in migration code.
302 ebl Make accurate mode with hash disk pass regression tests
304 ebl Implement first cut of accurate backup with hash disk.
306 kes Force unload of volume when wrong volume mounted in SD.
308 kes Fix bat seg fault at termination.
309 kes Add Bacula generated version to bat about box.
312 kes Experiment with allowing multiple read jobs.
313 kes Move final volume swapping code to DCR method and
314 call it from acquire_for_read().
315 kes When wrong volume is mounted during read, unload_autochanger.
317 kes Integrate the libdbi changes from Joao Henrique Freitas
319 kes Stop searching for Volumes in SD askdir if DIR returns the
320 same volume name twice in a row.
321 kes Close bat console windows first to eliminate error message
324 kes Tweak the swap Volume from one drive to another code so that
325 it now seems to work.
326 kes Resolve several problems with recycling that broke the new
327 code (these problems are in 2.2.9 as well).
328 kes Remove the volume lock when calling the sysop code.
329 kes Don't mark a reserved volume with no writers as unused otherwise
332 kes Rework class structures for VOLRES, DCR, and DEVICE to make
333 the method names a bit more logical, and for more logically
334 handling the responsibilities.
336 kes Remove redundant code in terminating the scheduler that just
337 causes a seg fault in many cases.
338 kes Cleanup releasing a volume and make it a DCR method.
339 kes Improve algorithm for detecting pre-reserved volume and
342 kes Tweak volume swapping code so it works.
343 kes Correct name overloading in mount.c
344 kes Replace released flag in VOLRES with reserved and add access
345 methods for the VOLRES class.
346 kes Prevent volume from being released while being swapped.
347 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
349 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
351 kes Refactor parts of stored/mount.c
353 ebl Add sanity checks for VolWriteTime and VolReadTime
354 ebl Take care of bad clock changes while computing VolWriteTime
355 and VolReadTime. This should fix or limit #1066
356 kes Correct error string numbers in dird/catreq.c
357 kes Restructure reserving, acquiring, and mounting volumes. Calls to
358 autochanger are deferred for mount.c -- simplifes the code.
360 kes Do not prune any running job. It just fails the job.
361 kes Lock the volumes when changing dev->reserved_device and marking
362 the volume unused otherwise the device can get reserved by
363 another job before the volume is released, thus blocking it.
365 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
366 kes Fix bug #1063, reuse of freed ptr in list nextvol.
367 kes Release regex compile buffer in filed/job.c
368 kes Add proper type of const char in sql_create.c
369 kes Turn off debug in daemon termination routines
370 kes Move free_volume_list() before devices are freed in stored.c
371 kes Fix reference to uninitalized stack variables in bregex.c.
372 This should correct bug #1067.
374 kes Fix possible seg fault in SD when freeing a volume entry.
376 kes Implement unload_dev() before swap device.
377 ebl Add statistics prunning with option and menu
378 kes Separate unload_dev() from unload_other_device() in autochanger.c
380 kes Apply patch from bug #1069 that corrects spurious error messages
381 when ACLs enabled on SGI but no ACL exists.
382 ebl Fix small segfault in bacula-sd when debug level is 500
383 kes Modify run_program() and run_program_full_output() to use
384 call by reference for the results string. This corrects a long
385 standing problem where the address of the string may be changed
386 in the subroutine but not in the calling program.
388 kes Re-enable code to remember last volume mounted on a non-tape
390 kes Add patch supplied in bug #1068 that fixes a SD crash when using
391 a Virtual autochanger.
392 kes Generate correct JobMedia records during spooling/despooling when
393 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
394 <tih@hamartun.priv.no> for excellent analysis and testing.
396 kes Tweak hash algorithm for htable using Martin Simmons idea
397 for doing a circular shift.
398 kes Remember what volume is in VTLs (previously turned off for
400 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
401 pointed out some problems in creating JobMedia records during
402 spooling with concurrent jobs. Fix the problem by updating the
403 start file position before despooling and generate a jobmedia
404 record at the end of despooling.
406 kes Fix handling of JobMedia records during spooling and when a
407 Volume is changed without actually writing data to the Volume.
409 kes Rework certain SD locking based on gdb tracebacks of deadlocks
410 sent by Eric. This code now uses only the volume_lock() rather
411 than the reservations lock when at EOM and acquiring a new
413 kes Ensure only one exit point in several subroutines.
415 kes Implement bsock code to permit locking. Use the new code in Verify
416 in the FD to prevent the heartbeat thread from disrupting the Verify
417 data sent to the Dir.
418 kes Modify SD locking to eliminate locking the reservations system from
419 outside the system. Use the volume lock when getting media data
420 and reserving a new volume at end of media.
421 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
422 when SD starts are not locked into place.
424 kes Fix error compiling runscript code on 64 bit machines.
425 kes Tweak Win32 mount point code.
426 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
427 cleared giving bad file estimate).
428 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
431 kes Keep Schedule run lists in order as suggested by
434 kes Implement autostart scripts for Debian.
435 ebl Implement upgrade catalog scripts.
437 ebl Apply jobstat patch for long term statistics. Have to implement
438 purge stats command and upgrade scripts.
439 kes Fix mtx-changer.in for broken Debian mt program.
441 kes Fix large number of JobMedia records reported by Eric Bollengier.
443 kes Apply doc fix from bug #1062.
444 kes Resolve crash and improper restore wx-console Win32 restore
445 GUI. Fixes bug #1065.
446 kes Update Win32 wxWidgets to latest version.
447 kes Attempt to do correct handling of Win32 mount points. Should
449 kes Fix Win32 FD backup/restore memory leak due to improper termination
450 of BackupRead/Write. This fixes bug# 1038.
452 ebl Reduce memory usage for accurate backup, working only with ctime
453 and mtime. (not all Lstat field)
454 About 40MB for my Linux system (400.000 files)
456 kes Add dcr->reserved_volume flag that allows us to release a volume
457 even if it is not vol->released. This allows maxvol2 to work when
458 Volumes expire and we are already writing to the device (i.e. a
459 volume is pulled out from under us by another job terminating after
460 we reserve the drive).
462 ebl Permit multiple command/console per runscript definition.
463 RunScript { command = /bin/true ; command = /bin/false ... }
464 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
465 (restart an application) just after the VSS snapshot on windows.
466 kes Don't zap dcr values during release_volume() as they might
467 have the next Volume to be mounted.
468 kes Fix AIX prototype.
470 kes Second cut of drive switching during backup.
473 kes Update Win32 version of wxWidgets to most recent version.
474 kes Tweak Copy job details.
475 kes Rework dir_find_next_appendable_volume to make a bit more effort
476 to find a suitable volume before giving up.
478 kes Make ask_sysop_to_create... to return if waken from wait.
479 This helps get out of blocked conditions.
480 kes Experimental implementation of switch_device in reservations.
481 kes Implement FD version to allow easier protocol changes.
482 kes Add Plugin Options string -- not yet passed to FD.
483 kes Implement PluginOptions ACL.
485 kes Attempt to correct problems with restores with autochangers and
486 use counts going negative
487 kes Rework SD status command and implement API for bat. Implements
488 header, runing waitreservation, devices, volumes, spooling,
489 and terminated status keywords.
490 .status storage=xxx <keyword>
491 kes Clarify TLS error message by adding double quotes around name.
492 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
493 kes Pass jcr to tls routines so debug messages can be handled better.
494 kes Rework jobq resource allocation code, and possibly fix a bug
495 that caused reference counts to get out of sync.
497 kes Rename fd/dir plugin to use Bacula standard underscore.
498 kes Plugin work -- bring dir up to fd level.
499 kes Start implementation of VTL code
500 kes Fix Win32 build after adding new cats subroutine.
502 kes First cut at Duplicate Job implementation.
504 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
505 kes Start PluginOptions string, and refactor a bit of ua_run.c
506 ebl Apply Allan patch that permit to reset recyclepool.
508 kes Test patch -- possible fix or improvement for bug #1053
509 kes Refactor FD and SD status commands to permit new API code in
510 SD, and to fix Win32 build.
511 kes Win32 build is now working.
513 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
514 some ideas in patch from Scott Bailey.
515 kes Begin implementation of duplicate Job control.
516 kes Fix some of Win32 build after recent additions.
517 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
518 which causes the FD to detect whether or not the OS has the
519 honor no dump bit (*BSD systems), and if so, to skip backing up
520 any file with this bit set. The feature is enabled by setting
521 'honor no dump flag = yes' in the Options section of a FileSet.
523 kes Correct po warning message with datarootdir
524 kes Implement more code in dird.c to put configuration parsing in
525 a class rather than use globals.
526 kes Restructure SD status command for implementation of bat API
529 kes Suppress incorrect 'Will not descend from x into y' messages.
530 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
531 daemon globals used by parser.
532 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
534 kes Fix free of plugin_list when none exists.
536 ebl Apply accurate project patch.
538 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
539 on non-mempool object)
540 kes First cut of converting FD .status to work with bat API.
542 .status client=XXX header
543 .status client=XXX running
544 .status client=XXX terminated
545 kes Implement first cut of Copy Job.
546 kes Implement Catalog in Pool resource. It overrides catalog specified
547 in the Client resource.
549 kes Apply patch (with some difficulties) from Joao Henrique Freitas
550 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
552 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
553 ftruncate() actually works. In the case of some (cheap) NAS devices,
554 it does not, and so recycling NAS Volumes does not work. The code
555 simply unlink()s the file, then recreates it. This fixes bug #1011.
557 kes First incomplete cut of big malloc blocks for htable.
558 kes Tweak plugin code.
560 kes Plugin debug code + tweak a couple bat dialog layouts
562 kes Fix creating first JobMedia record during Migration to include
563 proper index. This caused slow restores of migrated jobs.
564 kes Temp fix to plugin name file_index.
565 kes Bacula backed up and restored a MySQL database.
567 kes Implement plugin restore.
568 kes Implement parsing of db_driver to give db_type index.
570 kes First cut of plugin restore code.
571 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
572 and do not strip paths on symbolic links.
573 kes Set catalog backup database and user name from values specified on
574 the ./configure line.
575 ebl Fix #1031 about wrong pool source information in job report.
578 kes Remove a redundant jcr argument to find_files, match_files, and
580 kes Implement '.status dir header|scheduled|running|terminated' that
581 prints the requested status section. With the exception of the
582 header, the other reports have fields separated by tabs (\t).
584 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
585 a resource embedded run command to find a since time if no explicit
586 since time was supplied on the command line.
587 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
588 that updates the state file at job termination time in addition to
589 when the daemon terminates.
591 kes First version where a plugin did a backup.
592 bpipe-fd.so created a backup file, wrote a test
593 string to it, and Bacua could restore this fabricated file.
595 kes Implement DB Driver = string for the DBI driver.
596 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
597 kes First cut of code for loading Win32 plugin dlls. Implement
598 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
599 and implement a dlfcn.h file based on opengroup's definitions of
602 kes First cut plugin directives.
604 kes Apply patch from bug #1049 to prevent stripping the path on a
606 kes Attempt to fix bug #1047 where stripping a path corrupts the
607 heap. Waiting for feedback.
608 kes Correct the Mount message not to suggest labeling a new tape
609 when doing a restore. Submitted by email by John Stoffel.
610 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
611 FD by using casting. Reported in bug #1042.
613 kes A bit of crypto cleanup. More later.
615 Release Version 2.2.8
617 kes Apply patch from Martin to correct bug #1040, bscan sets existing
619 kes Fixed important spelling error in doc -- bug #1045.
621 ebl Fix bextract to be able to extract non-portable Win32 data to
623 kes Move initialization of read/write res lock earlier in the code.
624 This fixes the crash with a null conf file. This fixes bug
626 kes Redefine CURES in lib/parse_conf to be URES and move it all
627 into lib/parse_conf.c -- this responds to bug #1042, but does
628 not fix it. The fix is not to compile with FORTIFY_SOURCE.
629 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
630 the trunk SVN. I don't think this was reported as a bug.
632 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
634 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
636 kes Add DataDespooling and DataCommitting status (committing is
637 the last despooling).
638 kes Finish implementation of new reservations code noted below.
640 kes Fix bsnprintf for float point numbers. I broke recently when
641 parameterizing some variables. This fixes bug #1036.
642 kes Undo recent reservations changes ... will apply them later
643 when they work better.
645 ebl Fixes #1034 which cause mysql to hang the connection after 8h
646 ebl Change default statistics target of filename.name and path.path
647 fields for PostgreSQL. This speeds lookup by indexes. Thanks
649 kes A few more tweaks to new reservation code. Make sure to clear
650 vol released flag when retaking volume. When reading label and
651 label is bad mark volume unused. When recycling, mark volume
652 unused so it can be renamed.
654 kes Fix reserve_volume() so it doesn't release a volume in use
655 (i.e. a volume entry not marked released). This should be
656 the last part needed to fix bug #1018.
658 kes Move Heartbeat documentation from Job to Director resource.
659 This fixes bug #1033.
661 kes Fix existing switch drive SD code to call autochanger to release
662 any old volume. This must be done to keep the autochanger from
663 releasing subsequently newly reserved volumes in doing a close().
664 This should fix bug #1018.
665 kes Fail if attempting to get console input in batch mode. This
666 should help fail RunScript console commands that are incomplete.
667 kes First cut implementing switch_drive() in SD (not actually called).
669 kes Implement first cut running console commands in a RunScript.
671 ebl Fixes bug #1028 where 'Selection Type' option was not usable
673 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
676 Release Version 2.2.7
678 kes Add new free_tls() entry point so that Win32 builds.
679 kes Fix compile warning in src/lib/util.c
680 kes Fix entry point for edit_job_codes() so that Win32 builds.
681 kes Fix seg fault Frank Sweetser reports in regression testing
682 on his systems. The problem was that the original author of
683 bsnprintf.c did not take into account the side effects of
684 using ++x in the argument to a #define.
685 kes Make SD protocol backward compatible with version 2.2.x.
687 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
688 because Bacula no longer restores sockets.
689 ebl Always use ignorecase fileset option on win32 FD.
691 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
692 that implements double quoting include names in conf files,
693 and also allows piping input by having the first character
694 be a vertical bar (|).
695 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
696 that implement %f in RunScripts to pass the FileSet name.
697 kes Skip leading | when lex input comes from a pipe as suggested
698 by Michael Stapelberg <michael@stapelberg.de>.
700 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
701 Nerijus Baliunas <nerijus@users.sourceforge.net>
703 kes Implement Plugin Directory and plugin events.
705 kes Implement a security enhancement: TLS authentication but no
706 encryption. Enabled by setting 'TLS Authentication = yes'.
707 Note when this is on, TLS encryption is turned OFF!
709 kes This patch corrects a problem where the maximum concurrent storage
710 jobs counter gets out of sync during restore jobs causing jobs to
711 'wait on max Storage jobs'. This patch fixes bug #1009.
713 kes This patch fixes bcopy so that it produces correct Volumes.
715 kes This patch eliminates spurious output to the console during a VerifyVolume
716 job that contains encrypted data. It fixes bug #1024.
718 kes This patch prevents the 'status dir' command from trying to use a scratch
719 volume and possibly moving it from one pool to another. This patch fixes
722 kes Add new include to postgresql.c suggested by Marc Cousins so
723 that it compiles correctly with pgre version 8.3.
725 kes Fix --archivedir addition to configure. Replace it with
726 --with-archivedir in configure.in This fixes the regression
728 kes This patch fixes bug #1012 where the job is canceled because
729 of Max Run Time exceeded when the job has not yet started.
731 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
732 one 'part' to write. Instead of each part being stored on disk,
733 written to DVD, then deleted from disk, all parts are written to disk,
734 and only the last is written and deleted from disk.
735 kes This patch fixes the status command to include the formating string for
736 JS_AttrInsterting. It fixes bug #1021.
737 kes This patch should fix the Mac OS X build problem on the latest
738 Darwin, where sys/types.h was not included correctly (apparently
739 due to a change in the Mac headers). The solution was to explicitly
740 ensure that it is defined for the ./configure.
741 This patch also has a rebuild of configure that includes the Debian
742 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
743 kes This patch should ensure that queued messages to the console are
744 displayed as soon as possible. It should fix bug 1007, but has been
745 reported not to work.
747 kes This patch fixes the infinite loop when trying to increase the
748 maximum number of volumes in a Pool during the add command.
749 This patch fixes bug #1008.
751 Release Version 2.2.6
753 db Remove extra data on estimate command in joblist for bat.
755 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
756 really change anything, but is the beginning of doing it *right*.
757 To do it completely right the LastWritten date must be passed to
758 the SD, but it is not yet done.
759 kes Minor tweaks to some bat restore SQL.
760 kes This patch fixes bug #1003 where putting the message output from
761 a Verify job into the catalog results in a recursive loop. The problem
762 seems to show up only with postgresql (to be verified).
763 kes Correct %x to %p in postgresql debug statement.
765 kes Fix bug #942 where lots of emails where generated when the heartbeat
766 interval was low and Bacula wanted a different tape from the one in
769 ebl Add new SD despooling attributes and Dir inserting attributes
770 job status codes in the catalog (Status table).
772 ebl Use qmake-qt4 instead of qmake when available (debian system).
774 kes Add a security warning to src/cats/make_catalog_backup.in indicating
775 that passing the password via the command line (arg 3) is insecure.
776 This responds to bug #990 (it doesn't fix it).
778 kes Set default debug_level to zero. This corrects bugs #991 and #993.
779 kes Fix a crash in bat when it cannot connect to the Director for example
780 if the Director is not running.
781 kes Remove redundant INDEX (JobId) from File table in the trunk.
783 kes Make explicit exception to GPL in LICENSE to permit linking
784 the Win32 FD with Microsoft VSS code.
785 kes Apply the Solaris package patch from
786 Masopust, Christian <christian.masopust@siemens.com>
787 kes Apply the patch to optionally add a timestamp in the debug output
788 submitted by Mariusz Czulada <manieq@wp.eu>.
790 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
791 backend (sql_strerror). Fixes bug #989
793 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
794 It applied with no problems.
795 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
797 kes Redirect stderror to stdin on mt status command in mtx-changer.in
798 since the status is returned on stderr on Solaris.
799 kes Activate Close button on tray-monitor window. This fixes
801 kes Check for NULL item in parse_conf.c before calling it. In the
802 case of Device, there is no item and this caused a seg fault when
803 Device appears in the conf file.
804 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
805 avoids pulling in config.h multiple times in some new code.
807 kes Fix spurious warning message printed when creating a volume with
808 a LabelFormat. This fixes bug #976.
810 Release Version 2.2.5
812 kes Add JobId in place of Job name in all the Jmsg() output.
813 kes Correct the APP_DESC for the Win32 storage service (remove an e).
815 kes Make maxvol-test and new more strict maxvol2-test work.
816 kes Print JobId in all Jmsg() job output.
818 kes Add new SD despooling attributes and Dir inserting attributes
819 job status codes. This fixes bug 961.
820 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
822 kes Fix doc issue. This fixes bug #963.
823 kes Fix listing performance problems in bat. Pointed out by
825 kes Remove old debug code.
826 kes Fix bat code that tests for Win32. This should fix bug #968
827 kes Query 5 list wrong Vol after migration. This fixes bug #960
829 ebl Fix #969 where user can't change Replace option in restore menu.
831 kes Save jcr in thread specific data (tsd) for each thread.
832 kes Make Dmsg() print JobId as -%u.
833 kes Make Jmsg, Emsg, and others automatically pickup the jobid
834 for the thread if it exists.
835 kes Remove old reservation debug jid code.
836 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
837 ebl Add an option that permit to specify spool size in job
838 definition. (Applying patches/testing/spoolsize_per_job.patch).
839 You must upgrade SD and DIR at the same time.
840 dvl Add new configuration item --archivedir
841 dvl Adjust regression tests to use tmp not /tmp. This will allow
842 multiple concurrent runs of the regression tests.
844 kes Fix race condition that drops final block written to volume.
845 This happens in rare cases with multiple simultaneous jobs
846 when the Volume fills. This fixes bug #964. May be related
847 to bug #935 and possibly #903.
848 kes Eliminate more strerror() and replace with bstrerror().
849 kes Remove BSD getopt and replace with unrestricted IBM version.
850 kes Fix Win32 build for changed calling sequences.
851 kes More tweaks to the mount volume routines to get everything
852 right. Changed variable name from find to have_vol, which is
853 much easier to understand.
854 kes Enhance btimer debug code.
856 kes Fix FD->SD authorization failure, which was due to spurious
857 wakeups from a pthread_cond_timedwait(). Simply check the
858 predicate before continuing. This fixes bug #953.
859 kes Add const char where needed (more to do). Remove temp debug code.
861 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
862 kes Don't overwrite error message in check_tables_version.
864 kes Unlock batch insert tables with same calls used elsewhere.
865 kes Allow starting 59 jobs a second.
866 kes Make SD session key more random.
867 kes Add retry for SQLite opening db if it fails. Probably helps
869 kes Suppress extra error messages during batch insert failure.
871 kes Add jcr to timer packets so if killed message can be sent to job.
872 kes Add JobId to all Dmsg() output.
873 kes Put some FD auth code on dbglvl rather than fixed.
874 kes Return insert attributes error message in db msg buffer to avoid
875 false error messages. Helps fix bug #966.
876 kes Separate batch init error messages. Probably helps fix bug #966.
877 kes Make SD code that contructs attribute insert check string lengths
879 kes If Dir gets an error during inserting attributes, cancel SD.
880 This reduces unnecessary error messages.
882 kes Correct search boolean for getting Volume info
883 ebl Cleanup batch insert code. Probably fixes bug #965.
884 kes Back out one small change to the reservation system (reserving a volume).
885 kes Rework how a Volume is mounted. It is now much more intelligent and
886 will always attempt to use any mounted volume if possible and reduces
887 calls to the Director asking about volumes.
889 kes Turn off some code when batch insert not enabled.
890 kes Edit FD name in connect error messages.
891 kes Rework the reservation system to take into account that the Director
892 might give us a Volume that is different from the current one being
893 used, and to ensure that we don't exceed Maximum Volume Jobs.
894 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
895 fatal error with multiple jobs running'
896 kes Add more debug code in reservation system.
897 kes Implement maxvol-test to check bug #947.
899 kes Add code to handle tray monitor separated from Win32 FD.
900 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
902 kes Add missed return in fixing verify bug -- trunk only.
903 ebl Fix a command parser issue causing a director segfault.
904 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
906 kes Increase the max block size to 4MB fixes bug #957.
907 kes ERABT if user sets min block size > max block size. Fixes bug #956.
908 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
909 is not properly mounted (recognized) during a poll.
910 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
911 Job that has differences reports Verify OK.
912 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
914 ebl Add an option to operate on all pools with update vol parameters.
915 This complete the project 20. Patch from Nigel Stepp.
916 ebl Add history support to bconsole when using readline.
917 Using Ctrl-D to exit doesn't update .bconsole_history
918 kes Modify new volume algorithm to use max MediaId for generating next
919 volume number rather than the count of Volumes. This should essentially
920 eliminate the failure rate if some volumes were deleted. Bug #921.
921 kes Begin implemention of Optimize Job Scheduling.
922 kes Implement restore callback that Dirk and I agreed on for bat
923 restore. This fixes bug #928. Restore of backup of zero files fails.
924 kes Fix SQL Catalog logging which broke with new db_escape_string
927 Release Version 2.2.4
929 kes Fix bacula_cats.def for new db_escape_string().
930 kes Increase size of name string when FD making connection to SD.
931 May fix bug #953. FD->SD connection failure.
933 kes Add code to help Dan debug 2drive-incremental-2disk test.
934 kes Add code to try to fix bug #908.
935 kes Add waits to multiple exit detection code to try to force pid
936 file to always be deleted.
937 kes Restore good dev.tar.gz to rescue set appropriate binary property.
939 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
940 trying to switch drives by checking for blocking before unblocking.
942 kes Cancel storage daemon in all cases where FD reports error. This
943 should fix virtually all cases of bug #920.
944 kes Fix db_escape_string() for MySQL which did not compile.
946 kes Fix error message that was clobbered when Dir tells SD it does not
947 have write permission on Volume. This should fix a minor point
948 in bug #942, but not the main problem.
949 kes Add code to cancel job in SD if FD connection fails. This should
951 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
952 dvl Pass jcr and db into db_escape_string() to enable better escaping
954 kes Fix migration code to get correct Volume name with multiple volumes
955 by skipping |. Fixes bug #936.
956 kes Implement patch supplied by Landon to fix bug #944 where using
957 TLS with bconsole uses 99+% of the CPU.
958 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
960 kes Move patches into patches directory.
962 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
965 ebl Using 'm' in bconsole will show messages like before,
966 and not memory usage.
967 kes Fix bug #935, and probably also bug #903 where files were not
968 restored. MediaId was not properly set in JobMedia record after
971 kes Suppress chown and chmod error messages if the FD is not running
974 kes Apply Martin Simmons' patch that should turn off the new API usage
975 when batch insert is turned off allowing building on older
977 kes Add ./configure search in qwt-qt4 for qwt package
979 kes Bacula is now free of 3rd party GPL copyrighted code!
981 kes Add guid_to_name.c/h which replace idcache.
982 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
984 ebl Detect if new PosgreSQL batch insert API is present.
985 kes Correct incorrect mempool call causing Director crash. Occurs on
986 systems without va_copy().
987 sb Update spec files for 2.2.1 release
989 kes Fix memory pool call in ua_output.c. bug #934.
990 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
991 Add test program to fnmatch.c
993 kes Integrate patch to README.vc8 from
994 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
995 edit it to get it into Unix patch format.
996 kes Implement mkpath.c to replace old FSF makepath.c
998 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1000 Release Version 2.2.1
1002 kes Update POTFILES.in
1003 kes Cleanup a few underquoted AC_DEFUNs in configure
1004 kes Apply patch from Martin Simmons that adds a test for va_copy to
1007 kes Fix bug #921 by increasing the number of tries to create a new volume
1009 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1010 can be called multiple times. Implement a version for machines
1011 without va_copy() that gets a big buffer.
1013 kes Integrate more portable zone offset code into bsmtp.c
1014 Submitted by Attila Fülöp.
1016 kes Fix bad SD->FD return status reported by
1017 (James Harper) <james.harper@bendigoit.com.au>
1018 ebl Fix a bug in read_close_session which return random status
1019 thanks to James Harper
1021 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1022 and directory names during restore of single file/directories.
1023 kes Add sanity checks to .sql command when string is empty. Hopefully
1024 that will resolve Dirks Director crash.
1026 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1027 in the bsmtp chat subroutine when debug is >= 10.
1029 kes Fix Director crash when running bat SQL queries.
1030 kes Add David's notes on Item 8: Copy pools.
1032 kes Rework projects file to be current and ready for a vote.
1033 kes Enhance lex scanner error message.
1035 kes Tweak LICENSE file to mention BSD code.
1036 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1037 if specified on the ./configure.
1038 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1039 This class is intended to allow us to open a second bsock to the
1040 Director while in the restore subdialog.
1042 kes Fix configure to create bat Makefile before creating dependencies.
1043 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1044 kes Add a tooltip to the tray monitor.
1045 dvl Set the Director's PID file before dropping privs. This fixes
1048 kes Update AUTHORs file
1049 kes Increase the default max concurrent jobs to 20 in FD and SD to
1050 correspond with the default .conf files.
1051 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1052 some different, of the same file created by RN when porting the
1054 kes Rearrange some of the Win32 directories and the placement of the files
1056 kes Set DEVELOPER flag in version.h
1058 ========================================================================
1059 Release Version 2.2.0
1061 kes Apply a second doc patch from Marc.
1062 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1063 improves the tips section that discusses how to setup multiple
1066 kes Update bat README file.
1067 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1068 corrects a typo in the Recycle status check in db_find_next_volume().
1069 This will probably fix a number of annoying problems with multiple
1071 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1072 bnet calls -- no functionality change.
1074 kes Modify the Verify output to specify if files are missing on
1075 the Volume(s) or disk. Fixes confusion in bug #916.
1076 kes When more than one Volume is read in a migration job, the last
1077 Volume bytes reported are from the last read volume rather than
1078 the last written volume. Fixed. This fixes bug #910.
1079 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1080 It previously printed New Recyle flag is: no. This fixes bug
1083 kes Correct seg fault when switching tape drives during restore.
1084 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1085 be used until after 2.2.0 release.
1087 kes Remove fnmatch() in SD that permitted wild card specifications.
1088 This fixes bug #914.
1090 kes Fix %g in filename returned by SQL for browse tree reported by
1092 kes Fix configure so that it puts config.out in the cwd rather than
1094 kes Attempt to fix the locking problem reported by Eric in bug #906.
1095 kes Make berrno class to leave errno unchanged after constructor call.
1096 kes Make bnet_server use the heap rather than the stack to allocate
1097 its socket fd pointers to avoid a crash at termination. Problem
1098 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1100 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1101 and putting it in depkgs-qt along with Qt4.3.
1103 kes Rework code in acquire.c that switches drives for reading when
1104 the Media Type does not match. This should fix bug #906
1106 ebl Fix a director segfault during job setup #907
1107 kes Correct seg fault in postgresql when first operation returns no
1108 rows. Fixes Dirks File browser problem seg fault with bat.
1110 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1111 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1114 kes Implement PopUp YES/NO dialog for bat.
1116 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1118 kes Correct RunScript to terminate job in FD on failure.
1119 kes Change abort_on_error and AbortJobOnError to fail_on_error
1120 and FailJobOnError in RunScripts.
1121 kes Minor tweaks of code formating in RunScripts, principally to
1122 avoid depassing 80 columns.
1124 kes Eliminate one #ifdef Win32 in bsmtp
1125 kes Implement grow tool to grow a file for testing very large databases.
1126 kes Add big-vol-test to test Bacula seeking with > 5GB.
1129 kes Modify find_next_volume() to return all values in Media record.
1130 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1134 kes Update Release notes
1136 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1137 Warning, in previous beta version, all media get from scratch keep their
1140 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1141 This should fix bug #842. Made a note to look at removing the temp
1142 files at the end of the install.
1143 kes Add ability to mount and unmount a file device providing it is
1144 marked as being removable and has the appropriate mount and unmount
1145 commands defined in the Device resource. This fixes bug #830.
1146 kes When applying a storage override, release all previous storage
1147 definitions rather than just prepending the new storage.
1148 This should prevent a good deal of confusion.
1150 kes Implement ./configure search for qwt libraries.
1152 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1153 Win32 FD. This should fix bug #893.
1154 kes Remove an unnecessary beep in Win32 init code.
1155 kes Update copyright dates in Win32 executable about boxes.
1156 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1157 code with a BSD getopt.c and getopt.h.
1158 kes Remove sched.h from the Win32 compat directory -- not used.
1159 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1160 need to shut it down, do it through the services panel or the command
1162 kes Remove some inappropriate Bacula FSFE copyrights.
1163 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1164 kes Fix regress config non-portable test as pointed out by
1165 Florian Heigl <florian.heigl@gmail.com>
1166 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1167 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1169 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1170 Reported by Frank Sweetser.
1174 kes Fix client-only build.
1175 kes Integrate client-only fixes for bsys (initgroups) and conio from
1176 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1177 kes Make arguments to get_scratch_volume() in same order as other
1179 kes Rework the prune_volumes() subroutine so that after purging and
1180 no volume found in desired pool, it will check for a scratch
1181 volume. This prevents recycling the whole scratch pool.
1182 kes Add code to status storage to print boffset_t (largefile support).
1184 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1185 kes You now need a --with-qwt=<dir> to be able to build bat.
1186 kes Update src/win32/cats/bacula_cats.def to include the new
1187 db_get_query_dbids() call on Win32.
1189 kes Correct a problem when selecting a scratch volume and moving
1190 it to another pool that lost some columns.
1191 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1192 kes Enhance Autochanger error messages to include Volume and device name.
1193 kes Rework prune_volumes() code to take account of InChanger flag,
1194 and to handle recycling volumes going to the Scratch pool and
1195 current pool because the RecyclePool directive.
1196 kes Implement a better and more efficient db_get_query_dbids() to
1197 handle creating and passing back a list of DBIds.
1201 kes Start work on new more efficient DBId subroutine. First use
1202 will be for recycling volume to Scratch inchanger.
1203 kes Increase number of JobIds in pruning from 1000 to 10000.
1204 This to be replaced by above routine.
1205 kes Begin implementation of building Qt4 on Win32.
1206 kes Correct typo in fix I added for bad TLS shutdown.
1207 kes Pull 2.0.3 patches into patches directory.
1208 kes Update Release notes. Include qt-console in line count.
1209 kes Update Projects file.
1211 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1212 bug in migration code where a job that spanned two volumes
1215 kes Implement new BST_DESPOOLING blocked state. Change from locking
1216 during despooling in SD to blocking. This means that other threads
1217 can work with the device structure, in particular the reservations
1218 system while despooling.
1220 kes Fix return in reservation message queue that missed clearing
1221 the jcr lock (implemented 26Jun07 below).
1222 kes Rename a number of dev methods to make locking function names
1224 kes Document locking in lock.c. Move lock structures to new file
1227 kes Move reservations message lock to lock jcr only this
1229 kes Move main SD locking code into lock.c (new file).
1230 kes Update Win32 build to include lock.c
1234 kes Dirk committed the qwt library code for drawing graphs in bat.
1235 kes Tweak install of qwt so that it is integrated with ./configure.
1237 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1238 out by Eric (my typo).
1239 ebl Fix configure.in to get batch mode enable
1240 kes Return correct string from authenticate.cpp in bat when connecting
1242 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1243 spurious line drops when using TLS.
1244 kes Do not file reparse points when restoring a file that already
1247 kes Implement Windows reparse points -- similar to directories, but
1248 we do not descend into it. This is a first cut. They seem to
1249 be backed up, but restore is not yet tested.
1250 kes Remove restore_blocking in tls code when shutting a socket to leave
1251 it in blocking mode. Hopefully this will fix the encryption bug
1252 reported by Frank Sweetser.
1253 kes When opening a file for backup, tell the OS that we are going to
1254 read it sequentially -- optimization.
1255 kes Change variable names in authenticate_director() to not conflict
1256 with member names in bat. Caused great confusion with compiler,
1259 kes Queue openssl error messages in case of comm problem.
1260 kes Do shutdown() call if socket terminated.
1261 kes Remove some duplicated code in tls.c
1262 kes Move more of the bsock member variables into private and access
1264 kes Add Frank Sweetser's tls-test to the regression suite.
1266 kes Add Swedish sv.po file
1268 kes Don't print clock skew message in FD if less than 3 seconds diff.
1269 kes Add a bit of VSS info to status client.
1270 kes Implement a first cut of Vista VSS, using Win2003 code.
1272 Release: 2.1.20 beta
1274 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1275 loaded tape but uses first drive).
1276 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1277 This was indeed a Win32 issue.
1279 kes Simplify search of autochanger for in-use Volume.
1280 kes Fix exit condition of check for in-use volume. kes Remove
1281 inappropriate my_postgresql_free_result() in db_close()
1283 kes Fix bad return in FD when encryption signature not found.
1284 Probably caused a crash.
1285 kes Inhibit missing encryption signature error messages for
1286 file types where no signature computed.
1287 kes Correct inverted check on autochanger in reservation system.
1288 kes Tweak debug code in autochanger reservation.
1290 kes Add some additional locking in the cats directory in subroutines
1291 that modify packet variables called from batch insert.
1292 kes Rework how dcrs are allocated. new_dcr() can now be called
1293 with an existing pointer, and it will simply clean it up.
1294 This allows the reservation system to test various different
1295 devices, and will permit easy device changes.
1296 kes A bunch of changes all over to handle new new_dcr() calling
1298 kes Work more on the Volume management in the SD. Remember Volumes
1299 for tape drives and for autochangers (even virtual disk changers).
1300 kes When looking at the Volume list to reserve a drive, handle
1301 autochanger names correctly by interating through the changer
1302 devices. Also call the Director to see if a Volume is suitable
1303 for the current job.
1304 kes Fix some bugs in bscan. Make sure all media records are written.
1305 Make sure that valid JobMedia records are written for disk files.
1306 Previously they were completely wrong.
1307 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1308 that the URLs don't change and so that the developers will all
1309 work off the same copy. Rebuild from scrach.
1310 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1312 Release: 2.1.18 beta
1314 kes Fix seg fault in FD from incorrect digest size.
1315 kes Fix argument to non-OpenSSL crypto.c subroutine.
1317 Release: 2.1.16 beta
1319 kes Remove a few malloc()s from the encryption code.
1320 kes Use the class calls to bsock in filed/backup.c and restore.c in
1321 place of the old bnet_xxx code.
1322 kes Implement code that does an on the fly calculation of the
1323 signing digest during restore of encrypted files. It makes
1324 a best guess at the algorithm, and if it is not correct, will
1325 then revert to the old code which reads the file after it is
1327 kes Implement at least one missing crypto stream in stream_to_ascii()
1328 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1329 #877 where a reload with bad syntax causes Dir to exit.
1331 Cut: 2.1.14 beta (not released)
1333 kes Do not free a volume on a tape drive until another volume is
1334 mounted and read, or the autochanger unloads the volume.
1335 This should help the SD re-use volumes that are already mounted,
1336 and should fix bug #886.
1337 kes Apply patch from user brettedgar that allows gnome2-console include
1338 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1339 kes Apply patch from Lucien Weller that fixes day of week calculation
1340 because of DST flag problem. Fixes bug #887.
1342 kes Move find_next_appendable_volume() to after acquiring a valid device
1343 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1345 kes Unable to reproduce bug 872. However added additional testing for
1347 kes Bug #874 resolved by documenting SQLite limitations.
1348 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1349 kes Bug #881 resolved by removing typo in mtx-changer script.
1350 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1351 approval. Added a link to the wiki on the web page, and implemented
1352 a backup from http://paramount.ind.wpi.edu
1354 kes Fix update allfrompool to pass pool name.
1356 kes Convert to pure GPL v2 license.
1357 kes Fix sscanf problems reported by Peter Buschman that caused
1358 a bus error on Solaris.
1359 kes Rework (simplify) the select prompt in bat.
1360 kes Move get_jobid_from_tid() into lib and create a
1362 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1363 should definitely fix the problem of lost error messages in the
1365 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1366 kes Eliminate tcpd.h from the project. Enclose the #include from the
1367 library with extern C ...
1368 kes Add print of signal name when a signal is trapped.
1370 Release: 2.1.12 beta
1372 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1374 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1375 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1376 makes SQLit3 run 30 times faster, though a bit less safe.
1377 kes Implement --with-batch-insert in configure and detection of thread
1378 safe libraries. It is on by default, but turned off if no thread
1379 safe library (e.g. SQLite 2) is available.
1381 kes Fix Bacula PostgreSQL buffer overruns.
1382 kes Do better checking for NULL results returned from PostgreSQL;
1383 implement retry for failed queries; clear results buffer after
1384 failed query. Hopefully this will correct the PostgreSQL failures.
1386 kes Implement algorithm to handle only one appendable volume with
1387 Prefer Mounted Volumes = no.
1388 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1389 returned from a query.
1390 kes Make volume lock recursive.
1391 kes Implement an additional volume reservation algorithm that
1392 starts by considering all reserved volumes then uses the
1393 old brute force algorithm of searching the resources to
1394 find a suitable device.
1395 kes Add new reservations debug code and refine the old code.
1396 kes Update the win32/dll/bacula.defs file.
1398 kes Tweak reservations algorithm to permit a few more cases, i.e.
1399 volume reserved, but on different drive, ...
1400 kes Enhance SD status to include Pool and Media Type for drive in a
1401 more readable format (a bit longer).
1402 kes Fix PostgreSQL double free.
1404 kes Minor refactoring of restore decryption code.
1405 kes Add code to smartall.c to detect double free of a buffer.
1407 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1408 so that bsmtp will create a correct email address (mailbox only).
1409 kes Modify 'memory' command so that the buffers are listed as 'In use'
1410 to avoid confusion with Orphaned buffers.
1411 kes I reworked the OpenSSL include/lib flags to be handled in
1412 the standard Bacula way, which should fix bug #863 concerning
1413 non-standard OpenSSL libraries.
1415 kes Implement Help Browser window for bat.
1416 kes Fix reload bug that reset StorageId to zero.
1418 kes Fix TLS #ifdefing when TLS turned off.
1419 kes Ensure that when labelling a tape with Slot=0 that InChanger
1421 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1423 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1424 add DISTINCT (required by PostgreSQL).
1425 kes Implement BSOCK authenticate_director() method. Eventually will
1426 authenicate all daemons.
1427 kes Move several more functions into the BSOCK class.
1429 kes Add code to tell the OS that we no longer need a cached
1430 file that we were reading. In findlib/bfile.c. Also,
1431 only cache files that we are reading. Thanks to
1432 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1433 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1434 kes Implement script to automatically generate cats and dll .def
1435 files for Win32 dll.
1436 kes Update README.mingw32 to include new .def file generation.
1437 kes Correct typo in UTF-8 error message as reported by:
1438 jhernandez <julianhernandez@gmail.com>
1439 kes Add additional sm_check() code on debug level 1.
1440 kes Set default debug level to 1.
1441 kes Trap SIGABRT in attempt to get traceback.
1443 kes Reduce bat connect timeout from 30 to 15 seconds.
1444 kes More restructuring and implementing BSOCK class in place of
1446 kes Remove a few unnecessary malloc() tests in crypto code.
1447 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1448 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1449 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1451 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1453 kes Fix Verify InitCatalog. The attributes were not pointing to the
1454 correct saved location.
1455 kes Implement message callback so that GUI is sure to get all
1456 daemon messages. Currently displayed in a dialog in bat.
1457 kes Ignore SIGUSR2 (Bacula timer) in bat.
1458 kes Apply regress patch from bug #859 to allow regress to work
1459 with Solaris compiler.
1461 kes Begin adding TLS support to bat.
1462 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1463 clean up lex.c and make it more readable.
1465 kes Move more bnet functions into the BSOCK class.
1466 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1467 kes Complete change of berrno strerror() method to bstrerror()
1469 Release: 2.1.10 beta
1471 kes Cleanup incorrect email addresses in bsmtp.
1472 kes Make bat display initial messages rather than discard them.
1474 kes First cut of adding .mod to the run command.
1475 kes Implement auto display of messages in bat.
1476 kes Enhanced preferences to allow all Bacula output to be
1479 kes Try to make bsmtp date routines more generic.
1480 kes Fixed bug #856 autochanger documentation.
1481 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1482 kes Add new cats entry point so Win32 builds.
1484 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1486 kes Do better checking for the MySQL 64 bit libraries looking for both
1487 .a and .so libraries.
1488 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1489 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1490 kes Require the thread safe version of MySQL during configure. Thanks
1491 to Andre Noll for pointing this out.
1492 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1493 continuing in migration code.
1494 kes Apply implementation of tray-monitor font derived from gnome-console
1495 submitted by Andreas Piesk <a.piesk@gmx.net>
1497 kes Eliminate important memory loss in SQLite
1498 kes Fixed the batch insert MySQL thread specific data that was not
1499 being freed. See cats/mysql.c:db_thread_cleanup().
1500 kes Fix restore before command.
1501 kes Convert old hdr.name to name() in a few places.
1502 kes Implement update jobid command.
1503 kes Return all time_t dates in db_get_job_record()
1504 kes Stop watchdog in SD earlier.
1505 kes Put Pool just after Storage in please mount message.
1506 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1509 kes Update the po files.
1510 kes Fix Verify InitCatalog by making it cache attributes.
1512 kes Change name bacula-bat to bat for man 1 page to correspond to
1514 kes Check for client and store NULL pointers in status command. This
1516 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1517 kes Fix sign extended editing of %p.
1518 kes Clean out a little old #ifdefing in cats/mysql.c
1520 kes If time diff between DIR and FD is more than 600 seconds convert
1521 INFO message to WARNING.
1522 kes Implement heap size display in status for all daemons.
1523 kes Attempt to fix MySQL db open memory loss (not successfull).
1524 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1525 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1526 Query. This looks like a MySQL but but by doing extra releases,
1527 the memory goes away. This should fix bug #847.
1529 kes When backup fails, cancel SD before waiting for sd termination.
1530 kes If SD is waiting for FD to connect during cancel, wake up the
1532 kes Fix fsf code so that errno is correctly reported.
1533 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1535 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1536 so that Bacula doesn't later stumble into a seg fault.
1537 kes Use the term Restore Client in the restore Job report.
1538 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1539 the original job's FileSetId.
1540 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1541 spooling in migration jobs. Not yet tested.
1542 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1543 reading conf file from a pipe. However, do it with open_bpipe()
1544 rather than popen. Not yet tested.
1546 kes Fix an ugly bug where the VolCatBytes were getting updated
1548 kes Implement bconsole memory command that prints current memory
1549 usage, plus smartalloc dump.
1550 kes Clarify some error messages in backup, admin, and migrate.
1551 kes Shrink label dialog to smaller size.
1552 kes Invert Cancel OK buttons on restore to be OK Cancel.
1553 kes More strerror() to bstrerror() conversions.
1555 kes Start implementing bstrerror() in place of strerror().
1556 kes Stripping path -- seems to work.
1558 kes Prevent door and port files from being restored (mostly
1560 kes Free an unreleased buffer in compat code.
1561 kes Change console Job name from *Console* to -Console- to eliminate
1562 Win32 filename problems. Put Win32 path separator when creating
1563 Console file. This fixes bug #846.
1564 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1566 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1568 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1569 to force Win32 error message.
1571 kes First cut strip path. The data should be passed to the FD,
1572 but nothing is done with it yet.
1573 kes Enhance the digest and signature routines in the crypto
1574 library to accept a JCR and to use it to print error messages
1575 so that they will go in the Job report rather than the daemon's
1577 kes Simplify some of the verify signature code.
1578 kes Simplify a few of the alternative returns in the signature
1581 ebl Use only POSIX regex instead of GNU regex in breg.c for
1582 File relocation. It fix broken freebsd compilation.
1583 kes Convert all other Dir files to use new ua class message
1585 kes Tentative fix for missing digest signature in bug 807.
1586 kes Correct handle problem in new win32_ftruncate routine.
1587 kes Convert ua_purge.c and ua_update.c to use new ua class
1588 message routines for bat.
1590 kes Correct incorrect installation of LICENSE in Win32 installer.
1591 kes Display LICENSE at the beginning of the Win32 install.
1592 kes Attempt to correct the need for the png files to be installed
1594 kes Reapply my bat.conf install script in qt-console. I think I
1595 editted bat.pro instead of bat.pro.in and it was lost.
1596 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1597 the /var/lock/subsys for subsysdir. Also corrects typos in the
1600 kes First cut update job.
1601 kes Correct configure to include qmake of src/qt-console directory.
1603 kes Make restore job yes/mod/no print in one command so GUI works.
1604 kes First cut implementing backup and restore client.
1605 kes Correct editing in Verify output that caused a seg fault.
1607 kes Insure that bat.conf is not overwritten during installation.
1608 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1609 while I was implementing migration in March 2006 !
1611 ebl Cleanup file relocation, using char *RegexWhere instead of
1612 char *where + bool where_use_regexp
1613 kes Update some manpages and add bat manpage.
1614 kes Make a first cut at converting bacula.spec.in for bwx-console
1616 kes Apply patch from John Goerzen to add hostname as fourth argument
1617 to make_catalog_backup script.
1618 kes Fix typos I introduced into bsmtp.c
1619 kes Make pm_strxxx() routines handle input of NULL pointer. This
1620 is to protect from NULL pointers returned from SQL databases.
1621 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1622 kes Add more debug to FIFO code -- fix fifo regression test.
1624 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1625 kes Add thread timer to bnet_connect() to break from OS if wait time
1628 kes Update Win32 build to include new files, new symbols, and
1630 kes Implement socket level heartbeat (tcp_keepidle)
1631 ebl Commit File relocation patch
1632 kes Make bat have 'make install' target.
1633 kes Warn during install if old gnome-console binary found.
1634 kes Warn during install if old wx-console binary found.
1635 kes Add -8 option to bsmtp command line to add content type utf-8.
1636 Fixes bug #809. (Character coding problem in bsmtp).
1637 kes If < is found in target (from, to, cc) then do not enclose the
1638 target in < > in bsmtp. Fixes bug #772 (malformed address).
1639 kes When printing certain items in dbcheck, stop after 300000.
1640 Fixes bug #822. (dbcheck loops).
1641 kes Incorrect status in Dir after waiting for mount with poll set.
1644 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1646 kes Print waiting to reserve a device every 5 mins.
1648 kes Don't call close_part in label.c if tape and relabel.
1649 kes Don't free volume if busy in close() -- should help with
1651 ebl Fix #824 RunScript bug (After script could be execute twice)
1652 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1653 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1654 Add a regression script to test RunScript
1656 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1659 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1660 deprecated. No additional bugs will be fixed, and they will be dropped
1661 in a future release (probably 2.4.0).
1662 kes Change name of wx-console to bwx-console to make it more Bacula
1664 kes Change the name of gnome-console to bgnome-console to make it
1667 kes Some time in March, a Feature Request with patch from Jorj Bauer
1668 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1670 The ability for the director to validate a Client (FD) CN against
1671 an arbitrary set of patterns rather than the hostname, with
1672 A new 'TLS Allowed CN' set of directives which are implemented
1673 in the Client resource. Then pattern matching is used in place
1674 of hostname matching against the Certificate's CN. As an example, we
1675 have certificates which (a) use a local CA, and (b) have a CN of the
1677 kes Add new/changed entry points to Win32 build
1678 kes Create unaccepted-projects for projects that are not accepted.
1679 kes Simplify locking in the reservations system.
1680 kes Add more debug code in reservations.
1681 kes Make sure error condition on reserving a volume is handled correctly.
1682 kes Correct handling of volume_in_use.
1683 kes Correct handling of initializing a device.
1684 kes Move handling of broadcasting releasing a device into release_device().
1685 kes Correct attaching dcr to dev so that it is only done if device
1686 is properly initiated.
1688 kes Locking debug level tweaks in SD.
1689 kes Tweak new Volume code.
1691 kes Add exec external-command [wait-seconds] to bconsole. This
1692 executes the external-command. Note! normally external-command
1693 should be enclosed in double quotes.
1694 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1695 it should normally be off in a production system.
1697 kes Implement die command for SD so that we can force it to dump.
1698 kes Implement SD lock debug code.
1699 kes Implement new algorithm for keeping Volume list in SD. It
1700 is now owned by the device.
1702 kes Implement new code for freeing in use volumes that should
1703 resolve if not all, some of the problems of multiple drive
1704 tape conflicts described in bug 801.
1706 kes Fix gui/bacula-web/images files in svn.
1707 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1709 ebl Fix a bug in batch mode (in string escape)
1710 kes Correct migration prune SQL typo that crept in in a
1711 recent 2.1.x change.
1713 kes Move bnet_despool() into class in bsock.c
1714 kes Modify job report to include director name and Build OS.
1715 kes Move drop root privilege and check_catalog() before fork.
1716 kes Add update database scripts (version 9 to 10) to updatedb directory.
1718 ebl Check size and age of each file after its backup to see if
1719 it has changed during backup, if 'checkfilechanges' is set.
1720 The FD will do an extra check (stat(2)) after
1721 each file backup. mtime, ctime and size are compared with
1722 'before backup' information. If time or size mismatch, an
1723 error message will be generated. You must upgrade FD to use it.
1725 kes Make database name and user configurable
1726 --with-db-name=xxx --with-db-user=xxx
1727 kes Add back database type to message.c for debugging.
1729 kes Implement dir_sql() which issues an SQL query.
1730 kes Modify bat medialist to use dir_sql() and do some minor C++
1731 formatting as well as eliminating a number of pointers, simplifing
1734 kes Fix some of the mtx-changer grep commands for tape label readers.
1735 kes Convert a number of bsendmsg into the appropriate send/warning/error
1736 message class calls.
1737 kes Suppress the using database message in the .sql command.
1738 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1740 kes Add context menu for floating a window.
1741 kes Some minor cleanup and name changes in qt-console
1742 kes Add doing mt setblk 0 in Win32 mtx-changer.
1743 kes Apply Martin's bug fix to move definition of ENODATA for
1745 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1746 sqlite2 and sqlite3.
1748 kes More pruning cleanup.
1749 kes Turn on wait_for_drive by default in mtx-changer.
1750 kes Turn on Batch insert code by default as it now passes regression.
1751 kes Add ./configure --enable-bat to enable building of Bat.
1752 No install yet though.
1754 kes Implement a new .sql command for bat.
1755 kes Implement code to turn off pruning in obtaining the next volume.
1756 Pruning is turned off for the status dir command, but turned on
1757 for SD requests and for the list nextvolume command.
1759 kes Correct Qmsg() that was not updated correctly when committing a
1760 previous change (probably the recent TLS patch).
1762 kes Write new subroutine is_volume_purged() that explicitly checks
1763 if the Volume is purged, and if so marks it as such. This should
1764 resolve problems reported about needing to mount twice to recycle
1766 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1767 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1768 amount of duplicated code.
1769 kes Do volume pruning only for the Media Type desired (reduces pruning time
1770 if multiple Media Types are in the same pool).
1771 kes Implement more detailed info in the Job report for the Bacula version
1773 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1775 ebl Add bbatch tool to bench database and insert mode.
1776 Fix sql quote stuff in batch mode
1777 Fix sql stuff for mysql
1779 kes Correct problems with am/pm scheduling. Fixes bug #808.
1780 kes Implement new prunning code that prunes up to 1000 jobs at
1781 the same time. The same technique can be applied to a number
1782 of other prune/purge subroutines.
1783 kes Add an insanity check when starting a new tape job to ensure
1784 that the tape position has not been changed. If so fail the
1786 kes Fix Win32 build for dlls to add the folllowing:
1787 src/lib/bsock.c -- new file with new entry points
1788 src/lib/dlist.c -- new entry points
1789 src/cats/sql_create.c -- new entry point
1790 src/cats/sql_cmds.c -- new DATA item exported
1792 ebl batch mode cleanup bscan-test is ok now.
1793 kes Implement SD code to check length of disk volume before appending.
1795 kes Correct return status on db_batch... routines.
1796 kes Add call to db_write_batch_file_records() to migration code.
1797 ebl Fix AfterJob timing
1798 kes Move the checking of the database in initializion of the Director
1799 to after we drop privileges. This avoids the need for both root
1800 and bacula access to the DB.
1801 kes Correct a misplaced variable definition in src/filed/backup.c
1802 kes Correct how the new batch insert db_create_attributes_record()
1803 uses the arguments. Caused a seg fault in bscan.
1804 kes Implement lock() and unlock() methods in DEVICE class.
1805 Implement block() and set_block(xx) methods in DEVICE class.
1806 kes Modify bnet_connect() so that it uses time() to check for the
1807 wait time expiring (on some OSes, some system calls may not
1808 return immediately).
1809 kes Modify Verify to obtain the previous JobId when it is actually
1810 running rather than at schedule time (as it was in 1.38.x).
1811 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1813 kes When checking pid in pid file, continue running if the pid is
1814 the same as ours. This occurs on IRIX after a system crash.
1817 kes Extend new GUI API.
1818 kes Make the ua structure a class, and implement send_msg(),
1819 error_msg(), warning_msg(), and info_msg().
1821 kes Apply fix from for building wx-console on the Mac from
1823 kes Implement new select mechanism for GUI programs.
1824 kes Reorganize initialization of stackedWidgets in bat.
1826 kes Add updated nagios plugin supplied by Christian Masopust.
1828 kes More bat implementation.
1829 kes File migrate bug with Pool Occupancy using mediaid instead
1830 of jobids. Fixes bug #795.
1831 kes Fix orphaned buffers in filed backup and verify due to
1832 crypto buffers not freed during errors. Fixes bug #789.
1833 kes Extend new GUI api code to tree commands.
1834 kes Ensure that tree and dot commands check console ACLs.
1835 kes Permit marking directory with trailing slash.
1836 kes Allow 20 console connections (instead of only 10).
1838 kes Add smartctl call to bacula-sd.conf as an example of getting
1841 kes Modify jobq.c to let simultaneous restore jobs run. This may
1842 cause them to fail if they cannot get a drive.
1843 kes Add Client Connect Wait to Storage daemon to permit users to
1844 modify the time the SD waits for a FD connection.
1846 kes Correct virtual changer check which was backwards. This caused
1847 volumes to be unloaded into slots already occupied.
1849 kes Apply Command ACL filter to JobId list in restore command.
1850 kes Correct typeo in var.c patch.
1852 kes Don't let Bacula prune File or Job records for the current Job.
1853 kes Fix variable substitution pad + inc bug reported (with patch)
1856 kes Correct SQLite log table index as reported by Luca Berra.
1858 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1860 kes Begin implementing new comm signals for API.
1861 kes Fix a few places in lib/message.c where the open fd may
1863 kes Continue implementing lib/bsock.c (real class). Make jcr,
1864 who, host, and port private. There are new methods to access
1865 them for non-class use. This required touching a number of files.
1867 kes Add LANG=C to autoconf/randpass so it works with languages other
1868 than English. Fixes bug #788.
1870 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1872 You will not be able to generate Include/Exclude list any more.
1873 It will be fixed soon.
1874 If you want to use this, you can apply
1875 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1877 kes Restore of sockets created false error messages because Bacula
1878 no longer restores sockets, but the code was still trying to
1879 set the attributes on a non-existent file. Reported by a user.
1880 ebl finish RecyclePool feature
1881 Media will takes Pool.RecyclePool
1882 when moving from Scratch to a Pool or when user will do
1883 update volume=xxx frompool
1884 To use it, add RecyclePool = aPool to your Pool resource
1887 RecyclePool = Scratch
1891 kes Expand new BSOCK class adding signal() and new BNET signals.
1892 kes Begin enhancing the dot commands adding a new API function
1893 that returns more information and will make it easier
1894 to interface to the Director from a program.
1896 kes Make DEVICE fd private. Its new name is m_fd, and can be
1897 obtained with dev->fd() outside the class. This is the
1898 first of many DEVICE members to be made private.
1899 kes Implement Michael Renner's idea on having a virtual disk
1900 changer. I made some minor modifications (e.g. I did not
1901 implement the Virtual Changer directive, but simply set
1902 the Changer Command to an empty string.
1904 kes Implement a BSOCK send() method that writes the whole record
1905 in a single write() request rather than in two.
1906 ebl add update volume=xxx recyclepool=yyyy
1907 volume takes recyclepool from pool when using update volume=xxx from pool
1909 kes Fix encryption deblocking bug, which caused some restored files
1910 to be truncated. This fixes bug #763.
1911 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1912 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1914 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1915 ebl Use btime_t instead of uint64_t in media patch.
1917 kes Optimize the use of the database a bit in the Status dir command.
1918 Only open it when needed, ensure that if any previous database
1919 was opened, it is closed.
1921 kes Correct VolCatBytes bug from media patch.
1922 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1923 in the case of orphaned records.
1924 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1925 and File records in 300K chunks to be more efficient. This
1926 idea came from Juan Luis Frances (if I remember right).
1927 kes Apply Eric's scratch patch that moves a purged Volume to
1928 the RecyclePool. Question: how is RecyclePool set? what
1929 happens to the ScratchPool?
1930 kes Apply Eric's media patch that collects read/write media
1931 times as well as byte counts. This patch requires a
1932 simultaneous upgrade of the DIR and SD. Note, there
1933 should be some way to turn off timing. I'm not sure
1934 times are in Bacula units.
1935 kes Apply Eric's batch-insert patch.
1937 kes Update projects list.
1939 kes Implement Include/Exclude file lists in FD as dlists using
1940 the new dlistString class. This permits efficiently having
1941 large include/exclude lists and completes project Item 25.
1942 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1943 console is authorized to cancel the job. This fixes bug
1945 kes Modify SD so that the VolCatJobs medium record is updated
1946 at the beginning of a Job rather than the end. This
1947 fixes bug #775 where exceeding MaxVolJobs caused jobs
1949 kes Added a mutex around getting and setting Volume information
1950 so that multiple simultaneous jobs will single thread.
1952 Switch to using Subversion
1953 kes Remove src/pygtk-console/ from configure
1955 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1956 plus the entrypoints.
1957 kes Apply patch supplied that corrects debug print
1958 in canceling jobs for max run time. Supplied as
1959 part of bug #621, which was previously fixed.
1961 kes Test on job_canceled() and sd_msg_thread_done inside
1962 loop starting the message thread to avoid a race condition.
1964 kes Remove rl_catch_signal from console.c as it conflicted
1965 with the header definition. Fixes bug #765.
1966 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1968 kes Clarify some stored/acquire messages to indicate if the
1969 problem is with read or append.
1971 kes Fix memory leak with storage ids in cats/sql_get.c
1972 kes Terminate watchdog earlier to avoid reference to released
1973 memory -- reported by Jason Austin.
1974 kes Move closing the database from jobq.c to the director daemon
1975 termination routine. This fixes memory leaks for shadow jobs
1976 (i.e. migration jobs).
1977 kes Free up the unique jobid chain items in migrate.c. This fixes
1978 a memory leak problem.
1979 kes Convert some ugly looking for statements to use foreach_alist
1980 in findlib/find.c. This will facilitate converting the structures
1981 to use dlist (for large include/exclude lists).
1982 kes Fix a bug in the btree.c and btree.h routines, then rename them
1983 rblist and add them to be built in src/lib. Include some new
1984 methods written by Rudolf Cejka that make the code more readable
1985 (hides some of the ugly casting).
1986 kes Add set_next() and set_prev() methods which make the code much more
1987 readable. Also add a new dlistString class that facilitates storing
1988 strings in dlists. To be used in the large include/exclude lists.
1989 kes Make some trivial modifications to lib/tree.h that use rblist
1990 rather than dlist for storing the tree links. This was suggested
1991 by Rudolf Cejka. The result of this is that the restore tree now
1992 uses red-black binary trees rather than simple linked lists. This
1993 should give rather dramatic speed improvements for directories
1994 contining large numbers of directories/files (more than 10000).
1996 kes Fix maxruntime bug #621.
1998 ebl Implement the include JobID in spool file name project.
1999 kes Reorder projects file in order determined by Jan 2007 vote.
2000 kes Implement item #12 on project list -- quick release of FD by
2002 kes Fix open of SQLite3 db where user does not have write permission
2003 so that DIR does not crash. Fixes bug #761.
2005 kes Add back missing @ in Win32 Makefile.
2006 kes Change 'Device not configured to autolabel' from INFO
2008 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2009 which should restart an indefinite # of times.
2010 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2011 other DIR specifications.
2013 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2014 Fix path quoting in SQLite scripts.
2015 Fix problems with SHGetFolderPath.
2017 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2019 kes Fix Job restart on error bug that promotes an Inc to a Full
2020 backup. This should fix bug #755.
2021 kes Add qt-console and first cut of code.
2025 kes Fix Bacula->Documentation link on Win32 to point to index.html
2026 instead of bacula.html. Fixed bug #750.
2027 kes Return JobId in db_get_job_record() when JobId==0. This should
2029 kes Do not release source pointers when restarting a failed job.
2031 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2032 This *should* fix bug #747.
2033 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2036 kes Modify USTORE constructor to set an empty store_source string,
2037 and don't copy the store_source string in a cancel. Hopefully
2038 this will fix Arno's seg fault, bug #744.
2039 kes Add back code to disable conio in configure. Fixes bug #743.
2040 kes Correct the Options scanner in the FD to correctly handle
2041 SHA1 option, which was eating the next option. Reported by
2043 kes Add code to indicate when the SD is spooling, spool wait, and
2044 despooling as requested by Alan Brown.
2046 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob