1 Technical notes on version 2.5
6 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
7 examples/database/dbcheck.sql
10 dbdriver in bacula-dir.conf
12 enhancement to wait command: wait mount ...
16 filepattern (restore with regex in bsr)
18 remove reader/writer in FOPTS????
22 kes Fix editing of retention time difference to use 64 bit
23 int instead of 64 bit unsigned. This should permit very
24 long retention periods.
25 kes Implement code to prohibit a write job from appending to a
26 Volume that will be used for a read operation. This is
27 new code and could possibly cause some conflicts.
29 kes Integrate James Harper's Exchange Win32 plugin patch.
30 kes Apply patch from Marco van Wieringen that implements the new
31 Solaris libsec interface for ACLs so that Bacula can save and
32 restore both the new ACLs and old ACLs.
33 kes Marco's patch also corrects the file dependency generation code
34 so that it works properly both with shared libraries and static
36 kes Marco's patch also includes a small cleanup of the cats Makefile
37 to remove some references to non-existent files.
39 kes Modify win32 Makefiles to use full paths in most cases.
40 In particular add MAINDIR environment variable that points
41 to the main Bacula source directory.
43 kes Add read volume list code to SD -- not yet used.
44 kes Add James' binutils patch
45 kes Split volume management code out of src/stored/reserve.c into
47 kes Modify configure to do an automatic make clean. This ensures
48 that any changes to ./configure options are handled correctly.
50 Beta version 2.5.16 release:
52 ebl Rename JobStat table to JobHistory
53 kes Ensure that only normally terminated jobs are migrated.
55 kes Add Makefile dependency when using LIBTOOL_LINK so that any
56 change in ./configure options will be accounted for.
58 kes Fix typo in the ACL patch that I overlooked.
59 kes Apply Marco's libtool include patch.
61 kes Apply Bastian Friedrich's ACL patch to eliminate ACL
62 errors during restore.
63 kes Minor cleanup of create_restore_volume_list() code.
64 kes Fix typo in console Makefile.in
66 ebl Fix #1110 about RunScript that can't execute a script with
67 Unicode caracters in the path.
69 kes Apply tray-monitor patch from Bastian Friedrich to make it
72 kes Apply cleanup patch from Marco
73 kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
74 that implements libtool to create shared objects out of
76 kes Fix tray-monitor so it will speak to new FD.
77 ebl Fix bug with ansi label when volume name length < 6
78 ebl Fix segfault in debug level > 50 with btape.
79 ebl Remove warning message in btape when command is empty.
80 kes Fix Win32 build to pull in new BACULA define.
82 kes Change IncludeDir to Exclude Dir Containing.
83 kes Implement code to prohibit ExcludeDirContaining in an
84 Exclude section (same for Plugin and Options). A bit
85 of a kludge with RES_ITEM2 ...
86 ebl Add field to command list to restrict Runscript console
88 ebl Use a separate JCR when running Console command with Runscript.
89 ebl Permit to mark version as Beta in some ouputs
91 kes Add plugin types in jcr.h to reduce need to cast.
92 kes Do better checking of plugin return values.
93 kes Free plugin context after calling pluginFree() as
95 kes Allow plugin to call JobMessage with NULL context.
96 kes Do not add plugin to global list if loadPlugin returns error.
97 kes Rework plugin.h a bit to reduce dependence on Bacula.
99 kes Move generation of bsr file for Virtual Backup to run section
100 so that it is generated just before actually running.
101 Suggested by Graham Keeling.
103 kes Add malloc and free Bacula entry points for plugins. Increment
104 FD plugin interface version. Create a bacula plugin context
105 structure to keep track of whether or not the plugin is disabled.
106 kes Apply FileIndex fix for plugin name stream suggested by James.
107 kes List plugins in FD status report when debug > 0.
109 ebl Add a new VerId variable that is printed in version command.
110 kes Fix migration SQL not to migrate a job that has not terminated.
111 This is a partial fix to bug #1164.
112 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
113 backup start time bug reported by Graham Keeling.
115 ebl Fix possible bug in cancel_job() with job that are not
118 kes Fix bat build for Win32.
120 kes Copy plugin link field into ffpkt.
122 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
123 It provides FileRegex in bsr files and code to collect regex
124 from the user during restore, an Allow Mixed Priorities feature,
125 and documentation for the above.
126 ebl Remove db berkeley from configure process
127 kes Do dirty check on hostname (Linux only) and if not resolvable
128 use localhost as default.
129 kes Increase vtape max block to 20GB.
131 kes Refactor restore code to create a close_previous_stream(). This
132 This may destabilize the source.
133 kes Implement planned startRestoreFile() plugin call.
134 ebl Remove missing Loaded information from status slots storage command.
135 ebl Fix Console command problem that cancels the job
136 kes Add more plugin restore debug code.
138 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
139 kes Rewrite plugin restore interface a bit to correspond to how Bacula
140 creates and writes to the restored file.
141 kes Add some DebugMessage() calls to the bpipe-fd.c program.
143 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
144 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
145 Bat; allow add and delete in place of mark and unmark.
146 kes Another attempt to fix the endRestoreFile plugin bug noted below.
148 kes Apply dbi driver patch from Joao.
149 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
150 Bastien Friedrich reported the bug.
151 kes Create plugin instance only when FD job starts.
152 kes Add new FD plugin event: bEventCancelCommand when
153 a cancel command is issued to the FD.
155 kes Add cmd_plugin flag to jcr so we can globally know if a
156 command plugin is running.
157 kes If command plugin running, do not attempt (for the moment)
158 to get Win32 extended attributes.
159 kes Ensure that proper Win32 flags are set in bfile packet
160 if plugin_bopen() works on Win32.
161 kes Remove generated src/plugins/fd/Makefile
163 kes Implement build and install of bpipe-fd.so plugin.
164 kes Rework the interface that passes packets to the plugin
165 so that the packet is started and ended by the packet size.
166 This allows the driver to do a sanity check.
168 kes Rework the pluginIO Bacula internal code to enable
169 proper handling of Win32 error codes from GetLastError.
170 kes Apply Joao's patch to regress startover_libdbi.
172 ebl Add -B option to dbcheck to get catalog information
173 kes Fix Win32 build to include new library function.
174 kes Remove some old reader/writer code.
175 kes Implement ./configure --with-plugindir=xxx
176 ebl Fix the mysql bug in the new accurate code
177 kes Improve plugin debug. Create plugin test.
178 kes Set main thread specific data to INVALID because it
179 has no jcr. This allows debug output to work correctly.
180 kes Add src/plugins/fd/Makefile to ./configure process.
181 kes Make first cut attempt to correct SQL that computes the current
182 Pool usage. This is to fix bug #1159.
183 kes Do a bunch of plugin cleanups for Win32 and more careful checking
184 of PluginDirectory and whether or not a plugin was found.
186 kes This code should fix the race condition that leads to a Director
187 crash at job end time when the job list is updated. This was reported
189 kes Add more plugin documentation and fix include of config.h for
190 Win32 build (I hope).
192 ebl Revert to htable instead of rblist
193 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
194 tree instead of htable.
195 ebl Use a dedicate DB link to compute and send the accurate list
198 kes Fix compile errors in filed/fd_plugin.c.
200 kes Remove all double quotes from SQLite creating script and
201 replace by single quotes as suggested by John Huttley.
203 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
204 It significantly improves the performance of dbcheck for
206 kes Fix bad debug code call in src/filed/accurate.c
208 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
209 output. Perhaps we really need to implement M_SAVED.
211 kes Fix bug #1156 FD crash during processing of Accurate data.
212 kes Tweaks to htable code to improved debugging and make names
213 a bit more meaningful.
215 ebl Remove time_t from update_stats()
217 kes Modify the license of the example plugin program to allow
218 it to be used by anyone for making a Bacula plugin.
219 kes Make apply_rp_codes() in bpipe-fd.c be static.
221 kes Remove Encryption and Accurate lines in vbackup output -- not used.
222 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
223 kes Add host name to items printed during dump.
224 kes Make Check File Changes default on.
226 kes Set the default FD timeout to 3 minutes (previously 30).
227 kes Apply Bastian Friedrich's weird spelling correction patch.
229 kes Always print Verify hash differences. Rename variable to make the
230 code slightly more readable.
232 kes Correct tests for MaxFullInterval as reported by
233 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
234 kes Fix MaxDiffInterval code as well.
235 kes Enable Win32 plugin load code in lib.
236 kes Make Verify code that computes disk checksums use the same
237 algorithm as backup when dealing with sparse files.
238 kes Attempt to run VSS on any systems newer than Vista -- should
239 make it work on Windows Server 2008.
240 ebl Change the new statistic implementation. Remove the UseStatistic
241 directive and add a 'update stats [days=...]' command. You can
242 now decide when copy job records from Job table to JobStat.
243 Statistics are much more accurate with this.
245 kes Fix SQL case problem that may cause the failure of DiskToCatalog
247 kes First cut adding SD plugins.
249 kes Add Slot if it is non-zero to writing bsr file after a
251 kes Change a number of bnet_fsend() into class method calls.
252 kes Begin audit of diff of 2.4 branch to trunk code.
254 ebl Fix the mysql creation script that double-created an
255 index of the same field on the Media table.
256 Add an index to on VolumeName to the Media table for mysql.
258 kes Another try at fixing Vbackup. It looks much better this time.
259 Disable file index sanity check in FD with value stored in
260 attributes record because with Vbackup the File Index gets
261 changed, but not the attributes record.
262 Enhance some debug code.
263 Fix handling of re-indexing records that are copied in Vbackup.
265 kes Made level_to_str() know about Virtual backup.
266 kes Set correct Virtual backup write pool.
267 kes Fix compile warning in new dbcheck port code.
268 kes Fix migration code broken by previous virtual backup fix.
270 kes Fix problem of Virtual backup not writing a sequential FileIndex.
271 kes Reset Virtual backup time/date to the value from the last backup.
272 kes Ensure that storage name is passed to SD on read.
273 kes Correct a problem with Level and Virtual backup, rework how
274 bsrs are printed in debug to use standard routine.
275 kes Apply patch from Chris in bug #1133 that provides alternate db port
277 ebl Remove catalog dependency from bcopy tool.
278 ebl Modify catalog scripts to have an easier packaging integration,
279 using default variables.
280 Make difference between SQLite3 and SQLite in db_get_type()
282 kes Apply most of changes in a patch from:
283 Michael Stapelberg <michael+bacula@stapelberg.de>
284 that allow the Bacula FD to compile on IRIX 6.5.
286 kes Apply patch from Bastian Friedrich that accepts a yes on a
287 delete volume command line.
288 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
289 job when reading from one autochanger and writing to another.
290 kes Minor tweaks (copyright dates convert to use method instead of bnet).
292 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
293 drives when no tape is mounted.
295 kes Add additional info to some SD messages.
296 kes Add fix supplied by Martin Simmons for turning off EOL character
297 in new console multi-command code.
299 kes Fix a Verify InitCatalog problem where in certain cases
300 a garbage filename may be entered in the verification database. This
303 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
304 sent in by Riyas Yoosuf.
306 kes Fix seg fault in Dir during estimate command with no level value
307 given. This fixes bug #1140.
309 kes Add message to migration job when the target job is already migrated.
310 This closes bug #1129.
313 kes Raise some restore debug levels.
314 kes Replace off_t by boffset_t where ever I found it.
316 kes Define a machine dependent ioctl request type for use with
319 kes When a migration job actually runs, re-check the Job record
320 and skip if the job is already migrated. This should
321 significantly reduce the problems with bug #1129.
323 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
324 turn off glibc checks that prevent getting good dumps.
325 kes Implement console 'wait mount' command. Doesn't yet work.
326 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
327 kes Break the do_swapping into do_unload, do_swapping, and
328 do_load. It is much more logical that way.
329 kes Implement a set_dcr_from_vol subroutine in acquire.c for
330 reading volumes. This allows the dcr to be refreshed after being
331 zapped when the wrong volume is mounted.
332 This should fix bug #1126 -- During multiple tape restore, bacula
333 does not ask for physical tape change, but rereads same tape
335 kes Apply patch submitted for bug #1107 with a small modification.
336 This fixes a bug where bcopy copied too many records.
337 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
338 This fixes bug #1124.
339 kes Make the default bat restore Pool be Any. This fixes bug #1118.
341 kes Remove debug statement that crashes the SD at the end of
342 a tape during restore. Fixes bug #1125.
344 kes Implement Win32 bat changes made to Branch-2.4
346 kes Tweak separator command in console to start disabled and
347 allow defining no separator character. Also make code a
348 bit more fault tolerant.
349 kes Make btraceback write the traceback to the working directory
350 before attempting to mail it.
351 kes Add a RFC to Projects.
353 kes Attempt to implement a kludge to make Qt work with bat
355 kes Setup rstorage correctly. Virtual backups are working.
357 kes Move setting JobLevel and JobType into a method, which should
358 allow completing Virtual Backups.
359 kes Fix verify jobs to work again.
361 kes Virtual Backup tweaks -- it is close to working.
363 kes Ensure that SD tried to mount a volume not in an autochanger
364 at least once before asking for operator intervention.
365 kes Make SD aware of Virtual Backup jobs.
366 kes Add VirtualFull for bat.
367 kes Changes to get read storage correct for Virtual Backup.
369 kes Remove old code from label.c
370 kes Split display_display_info() out of write_bsr_file()
371 kes do_vbackup_init() working -- i.e. bootstrap file built.
372 kes Change Bacula trademark owner from John Walker to Kern Sibbald
373 kes First non-working cut of vbackup
374 kes Correct FD heartbeat code to use volatile variable accessed by
376 kes Zero thread id with memset if on Win32 in case it is a struct.
377 kes If cannot create JobMedia record, continue to try to write eof
378 and clean up in block.c
380 kes Add code to interface OpenSSL to new Win32 pthreads code which
381 used a structure for thread_t.
383 ebl tweak bat for win32 compilation
385 ebl Remove tokyo cabinet from the source
386 ebl Update configure/autoconf to support berkeley DB
387 ebl Add a sort to db_get_file_list() to improve bsr construction time.
389 kes Add a mtx-changer.conf file that is not overwritten during
390 an upgrade. It fully configures the mtx-changer script.
391 kes Clear in-use bit on vol when unused while swapping.
393 kes Remove sleep at end of ./bacula
394 kes Clear hash packet for hardlinked files correctly. This corrects
395 a long standing bug where hardlinked files selected individually
396 would occasionally not be restored.
398 kes Apply Eric's patch to ensure that autoprune does not return
399 a Volume not in the autochanger unless requested to do so.
400 kes Correct bat restore display of multiple drives. This fixes
402 kes Do find_a_volume() each time an unload is done. This
403 fixes the failure of maxvol2-test.
405 kes Add some SD debug code.
406 kes Do find_a_volume() each time an unload is done.
407 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
408 and adds --with-db-port to ./configure.
409 kes Use Qmsg() in job.c watchdog callback.
411 kes Release main control rwlock if ABORTing.
412 kes Make watchdog connect timeout queue messages rather than sending
413 directly to avoid lock conflicts with the real thread.
414 kes Add const char in dbd.c to avoid compiler warnings.
415 kes Fix python compiler string warning. Note, IMO the GNU C++
416 compiler guys have made a *very* bad change to their compiler.
417 They now force all strings to be 'const' unless you explicitly
418 cast them, which is extremely ugly and ruins nice code as well
419 as creates a lot of useless work.
421 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
422 mt. This fixes bug #1116.
423 kes Add const in python files to reduce compiler warnings.
424 This may have to be backed out because of later compiler
426 kes Fix failure of 2drive-concurrent-test. Always read label;
427 clear_unload() only after drive is defined in acquire_for_read().
429 kes Generally clean up the manual tape loading code. The main
430 conceptual change is that when a volume is marked to be unloaded,
431 its volume name is retained, and it is only marked as unloaded
432 when either the autoloader says it is unloaded or another tape
433 is read on that drive.
435 kes Add debug code and refactor subroutine in stored/mount.c
436 kes Fix format problem in bscan output reported in bug #1105.
437 ebl Fix get_next_volume_for_append logic with autochanger
438 - use pruned volumes if found
439 - don't reset the inchanger flag after getting a recycled volume
441 Fix recycle_oldest_purged_volume to take InChanger flag in account
443 ebl Add mmap/unmmap implementation for tokyodbm under win32
445 kes Make first step toward eliminating globals from config
446 scanning. Also should be a workaround for FORTIFY_SOURCE
447 GNU C bug -- fixes bug #1042.
449 kes Apply duplicate job tests to restarted jobs.
450 kes Copy more data when restarting a job so that run
451 overrides are kept. This should fix bug #1094.
453 kes More word alignment cleanup.
454 kes Fix bug where SD did not ask operator if the device could not
455 be opened. Reported by Eric.
457 kes Add dbuser to DIR conf file (replaces user).
458 kes Add --with-db-password to ./configure
459 kes Fix regress to handle db_password.
460 ebl Add new 'status storage slots' that list autochanger
462 ebl Update vtape driver to compile only under Linux.
463 ebl Fix a bug when restoring with a wrong mediatype.
465 kes Eliminate ints from conf files and structures to avoid
466 word alignment problems
468 kes Fix bug reported by Scott Barninger where the bacula script
469 refers to scripts in the wrong directory. Needed to meet the
470 requirements of recent FHS location changes.
471 ebl Disable vtape for FreeBSD.
473 ebl Modify disk-changer to check if slot contains something before
476 ebl Fix vtape on win32 and debian.
477 ebl Fix autoselect patch (cause segfault).
479 ebl Fix autoselect option broken for a while. Fix #1089. Need some
480 work with StorageId to be able to use a particular drive in a
483 ebl Rename vtape to vtape.
484 ebl Update vtape driver.
486 ebl Modify vtape driver to avoid sparse file.
487 kes Add make clean of qt-source directory during ./configure
488 kes Store last block number written to tape in DEVICE and
489 use it for testing for correct last block on EOT.
491 Release Version 2.4.0:
495 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
496 This fixes bug #1095.
498 kes Add create_postgresql_database.sql to Win32 installer. Should
499 fix problem reported by Juilio Monteiro.
500 kes Get correct slot when auto unloading a device. This fixes bug
503 kes Fix multiple media restore.
504 kes Make DEVICE Slot private and access it via a method.
505 Allows better control over when it is set and cleared.
506 kes Fix possible seg fault if SQL error.
508 kes Add Martin's fixes to argument scanning for the estimate
509 command. This fixes bug #1093.
510 kes Add debug code to SD.
511 kes Fix renaming a Volume, which used the wrong Volume name.
513 kes If operator has rewind tape, print warning, release tape and
514 try once more. If tape is positioned somewhere, something went
515 wrong, so mark the tape in error and try once more. Previously
516 this error was fatal, now it produces an error message.
517 kes Ensure correct volume name displayed during restore
518 kes Ensure that Volume is mounted for restore.
520 kes Fix a few more Coverity reported problems.
522 kes Apply Allan Black's status dir job count patch.
523 ebl Add information about IMPORT/EXPORT slots in mtx-script.
524 kes Enhance a couple of SD debug messages.
525 kes Tweak unload flag setting and ensure it is set during swap.
527 ebl Fix #1091 about bad output in estimate command.
529 kes Modify autochanger locking to attempt to avoid race
531 kes Make sure device not busy before doing label command.
532 kes Display open() errors except when polling. Previously too
533 many were suppressed. This should fix bug #1070.
534 kes Fix Win32 reparse points. Bacula will not recurse into any
535 reparse point directory, including mount points, unless the
536 directory is explicitly mentioned at the top level (same as
537 with Unix). A file that is linked to another file will be
538 backed up -- much as Unix does for hardlinked files.
539 This fixes bug #1041.
541 kes Remove double quotes from ChangeLog and ReleaseNotes
542 kes Remove StorageId test when pruning and recycling (Eric's changes).
543 kes Remove old form of locking when getting volumes -- causes deadlock.
544 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
545 the name unique and to eliminate compile time error.
546 kes Add accurate.o to Win32 FD Makefile
548 kes Fix cats dll build on Win32 after db_update_job_end_record
549 calling sequence change.
550 ebl Switch to tokyo dbm instead of htable in accurate code
551 ebl Include tokyo dbm to bacula source tree
553 kes Fix buffer overruns detected by Coverity.
555 kes Tweak joblog display.
557 kes Implement --without-qwt
558 kes Fix layout of restore tree dialog
559 kes Add configure bat QWT libraries, so that bat can be built
560 with or without the QWT libaries.
562 ebl Add dummy tape driver for regression tests.
563 kes Make sure we unload the right slot when swapping.
565 kes Add debug times, reduce size of two-pool-changer test
567 ebl Tweak autoconf scripts for vtape
569 kes Improve SD reserve debug code.
570 kes Testing an improvement to free up volumes no longer in use.
572 kes Rework SD acquire for read to handle autochanger Volume
574 kes Implement regression that explicitly tests swapping a Volume
575 from one drive to another.
576 kes Enhance disk-changer to detect most error conditions.
577 kes Fix SD code so that it properly swaps a Volume between drives.
578 This fixes bug #1083.
580 kes Apply libdbi patch from Joao Freitas for regress and for
581 Bacula trunk. Regress now works with libdbi. Nice.
582 kes Apply .nobackup patch from bug #1077 submitted by
584 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
585 name into jobs cloned via the run directive.
587 kes Prevent a Volume that is being swapped from being freed from
588 the volume list. This will most likely fix, at least partially,
590 kes Fix strippath so that it does not get a buffer overrun and crash FD.
591 This fixes bug #1078.
592 kes Remove 50 millisec wait in SD that broke debugger.
593 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
594 that a job may run, counted from when the job was scheduled.
595 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
596 a job may block waiting for a resource, counted from when the job starts
597 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
598 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
599 that implements multiple commands per line in the console when using
600 readline. Modify the default to use a semicolon as the command separator.
602 ebl Fix SQL query in migration code.
603 ebl Make accurate mode with hash disk pass regression tests
605 ebl Implement first cut of accurate backup with hash disk.
607 kes Force unload of volume when wrong volume mounted in SD.
609 kes Fix bat seg fault at termination.
610 kes Add Bacula generated version to bat about box.
613 kes Experiment with allowing multiple read jobs.
614 kes Move final volume swapping code to DCR method and
615 call it from acquire_for_read().
616 kes When wrong volume is mounted during read, unload_autochanger.
618 kes Integrate the libdbi changes from Joao Henrique Freitas
620 kes Stop searching for Volumes in SD askdir if DIR returns the
621 same volume name twice in a row.
622 kes Close bat console windows first to eliminate error message
625 kes Tweak the swap Volume from one drive to another code so that
626 it now seems to work.
627 kes Resolve several problems with recycling that broke the new
628 code (these problems are in 2.2.9 as well).
629 kes Remove the volume lock when calling the sysop code.
630 kes Don't mark a reserved volume with no writers as unused otherwise
633 kes Rework class structures for VOLRES, DCR, and DEVICE to make
634 the method names a bit more logical, and for more logically
635 handling the responsibilities.
637 kes Remove redundant code in terminating the scheduler that just
638 causes a seg fault in many cases.
639 kes Cleanup releasing a volume and make it a DCR method.
640 kes Improve algorithm for detecting pre-reserved volume and
643 kes Tweak volume swapping code so it works.
644 kes Correct name overloading in mount.c
645 kes Replace released flag in VOLRES with reserved and add access
646 methods for the VOLRES class.
647 kes Prevent volume from being released while being swapped.
648 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
649 plugin that add %w (where) and %r (replace flag) editing to
651 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
653 kes Refactor parts of stored/mount.c
655 ebl Add sanity checks for VolWriteTime and VolReadTime
656 ebl Take care of bad clock changes while computing VolWriteTime
657 and VolReadTime. This should fix or limit #1066
658 kes Correct error string numbers in dird/catreq.c
659 kes Restructure reserving, acquiring, and mounting volumes. Calls to
660 autochanger are deferred for mount.c -- simplifes the code.
662 kes Do not prune any running job. It just fails the job.
663 kes Lock the volumes when changing dev->reserved_device and marking
664 the volume unused otherwise the device can get reserved by
665 another job before the volume is released, thus blocking it.
667 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
668 kes Fix bug #1063, reuse of freed ptr in list nextvol.
669 kes Release regex compile buffer in filed/job.c
670 kes Add proper type of const char in sql_create.c
671 kes Turn off debug in daemon termination routines
672 kes Move free_volume_list() before devices are freed in stored.c
673 kes Fix reference to uninitalized stack variables in bregex.c.
674 This should correct bug #1067.
676 kes Fix possible seg fault in SD when freeing a volume entry.
678 kes Implement unload_dev() before swap device.
679 ebl Add statistics prunning with option and menu
680 kes Separate unload_dev() from unload_other_device() in autochanger.c
682 kes Apply patch from bug #1069 that corrects spurious error messages
683 when ACLs enabled on SGI but no ACL exists.
684 ebl Fix small segfault in bacula-sd when debug level is 500
685 kes Modify run_program() and run_program_full_output() to use
686 call by reference for the results string. This corrects a long
687 standing problem where the address of the string may be changed
688 in the subroutine but not in the calling program.
690 kes Re-enable code to remember last volume mounted on a non-tape
692 kes Add patch supplied in bug #1068 that fixes a SD crash when using
693 a Virtual autochanger.
694 kes Generate correct JobMedia records during spooling/despooling when
695 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
696 <tih@hamartun.priv.no> for excellent analysis and testing.
698 kes Tweak hash algorithm for htable using Martin Simmons idea
699 for doing a circular shift.
700 kes Remember what volume is in VTLs (previously turned off for
702 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
703 pointed out some problems in creating JobMedia records during
704 spooling with concurrent jobs. Fix the problem by updating the
705 start file position before despooling and generate a jobmedia
706 record at the end of despooling.
708 kes Fix handling of JobMedia records during spooling and when a
709 Volume is changed without actually writing data to the Volume.
711 kes Rework certain SD locking based on gdb tracebacks of deadlocks
712 sent by Eric. This code now uses only the volume_lock() rather
713 than the reservations lock when at EOM and acquiring a new
715 kes Ensure only one exit point in several subroutines.
717 kes Implement bsock code to permit locking. Use the new code in Verify
718 in the FD to prevent the heartbeat thread from disrupting the Verify
719 data sent to the Dir.
720 kes Modify SD locking to eliminate locking the reservations system from
721 outside the system. Use the volume lock when getting media data
722 and reserving a new volume at end of media.
723 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
724 when SD starts are not locked into place.
726 kes Fix error compiling runscript code on 64 bit machines.
727 kes Tweak Win32 mount point code.
728 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
729 cleared giving bad file estimate).
730 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
733 kes Keep Schedule run lists in order as suggested by
736 kes Implement autostart scripts for Debian.
737 ebl Implement upgrade catalog scripts.
739 ebl Apply jobstat patch for long term statistics. Have to implement
740 purge stats command and upgrade scripts.
741 kes Fix mtx-changer.in for broken Debian mt program.
743 kes Fix large number of JobMedia records reported by Eric Bollengier.
745 kes Apply doc fix from bug #1062.
746 kes Resolve crash and improper restore wx-console Win32 restore
747 GUI. Fixes bug #1065.
748 kes Update Win32 wxWidgets to latest version.
749 kes Attempt to do correct handling of Win32 mount points. Should
751 kes Fix Win32 FD backup/restore memory leak due to improper termination
752 of BackupRead/Write. This fixes bug# 1038.
754 ebl Reduce memory usage for accurate backup, working only with ctime
755 and mtime. (not all Lstat field)
756 About 40MB for my Linux system (400.000 files)
758 kes Add dcr->reserved_volume flag that allows us to release a volume
759 even if it is not vol->released. This allows maxvol2 to work when
760 Volumes expire and we are already writing to the device (i.e. a
761 volume is pulled out from under us by another job terminating after
762 we reserve the drive).
764 ebl Permit multiple command/console per runscript definition.
765 RunScript { command = /bin/true ; command = /bin/false ... }
766 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
767 (restart an application) just after the VSS snapshot on windows.
768 kes Don't zap dcr values during release_volume() as they might
769 have the next Volume to be mounted.
770 kes Fix AIX prototype.
772 kes Second cut of drive switching during backup.
775 kes Update Win32 version of wxWidgets to most recent version.
776 kes Tweak Copy job details.
777 kes Rework dir_find_next_appendable_volume to make a bit more effort
778 to find a suitable volume before giving up.
780 kes Make ask_sysop_to_create... to return if waken from wait.
781 This helps get out of blocked conditions.
782 kes Experimental implementation of switch_device in reservations.
783 kes Implement FD version to allow easier protocol changes.
784 kes Add Plugin Options string -- not yet passed to FD.
785 kes Implement PluginOptions ACL.
787 kes Attempt to correct problems with restores with autochangers and
788 use counts going negative
789 kes Rework SD status command and implement API for bat. Implements
790 header, runing waitreservation, devices, volumes, spooling,
791 and terminated status keywords.
792 .status storage=xxx <keyword>
793 kes Clarify TLS error message by adding double quotes around name.
794 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
795 kes Pass jcr to tls routines so debug messages can be handled better.
796 kes Rework jobq resource allocation code, and possibly fix a bug
797 that caused reference counts to get out of sync.
799 kes Rename fd/dir plugin to use Bacula standard underscore.
800 kes Plugin work -- bring dir up to fd level.
801 kes Start implementation of VTL code
802 kes Fix Win32 build after adding new cats subroutine.
804 kes First cut at Duplicate Job implementation.
806 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
807 kes Start PluginOptions string, and refactor a bit of ua_run.c
808 ebl Apply Allan patch that permit to reset recyclepool.
810 kes Test patch -- possible fix or improvement for bug #1053
811 kes Refactor FD and SD status commands to permit new API code in
812 SD, and to fix Win32 build.
813 kes Win32 build is now working.
815 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
816 some ideas in patch from Scott Bailey.
817 kes Begin implementation of duplicate Job control.
818 kes Fix some of Win32 build after recent additions.
819 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
820 which causes the FD to detect whether or not the OS has the
821 honor no dump bit (*BSD systems), and if so, to skip backing up
822 any file with this bit set. The feature is enabled by setting
823 'honor no dump flag = yes' in the Options section of a FileSet.
825 kes Correct po warning message with datarootdir
826 kes Implement more code in dird.c to put configuration parsing in
827 a class rather than use globals.
828 kes Restructure SD status command for implementation of bat API
831 kes Suppress incorrect 'Will not descend from x into y' messages.
832 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
833 daemon globals used by parser.
834 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
836 kes Fix free of plugin_list when none exists.
838 ebl Apply accurate project patch.
840 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
841 on non-mempool object)
842 kes First cut of converting FD .status to work with bat API.
844 .status client=XXX header
845 .status client=XXX running
846 .status client=XXX terminated
847 kes Implement first cut of Copy Job.
848 kes Implement Catalog in Pool resource. It overrides catalog specified
849 in the Client resource.
851 kes Apply patch (with some difficulties) from Joao Henrique Freitas
852 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
854 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
855 ftruncate() actually works. In the case of some (cheap) NAS devices,
856 it does not, and so recycling NAS Volumes does not work. The code
857 simply unlink()s the file, then recreates it. This fixes bug #1011.
859 kes First incomplete cut of big malloc blocks for htable.
860 kes Tweak plugin code.
862 kes Plugin debug code + tweak a couple bat dialog layouts
864 kes Fix creating first JobMedia record during Migration to include
865 proper index. This caused slow restores of migrated jobs.
866 kes Temp fix to plugin name file_index.
867 kes Bacula backed up and restored a MySQL database.
869 kes Implement plugin restore.
870 kes Implement parsing of db_driver to give db_type index.
872 kes First cut of plugin restore code.
873 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
874 and do not strip paths on symbolic links.
875 kes Set catalog backup database and user name from values specified on
876 the ./configure line.
877 ebl Fix #1031 about wrong pool source information in job report.
880 kes Remove a redundant jcr argument to find_files, match_files, and
882 kes Implement '.status dir header|scheduled|running|terminated' that
883 prints the requested status section. With the exception of the
884 header, the other reports have fields separated by tabs (\t).
886 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
887 a resource embedded run command to find a since time if no explicit
888 since time was supplied on the command line.
889 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
890 that updates the state file at job termination time in addition to
891 when the daemon terminates.
893 kes First version where a plugin did a backup.
894 bpipe-fd.so created a backup file, wrote a test
895 string to it, and Bacua could restore this fabricated file.
897 kes Implement DB Driver = string for the DBI driver.
898 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
899 kes First cut of code for loading Win32 plugin dlls. Implement
900 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
901 and implement a dlfcn.h file based on opengroup's definitions of
904 kes First cut plugin directives.
906 kes Apply patch from bug #1049 to prevent stripping the path on a
908 kes Attempt to fix bug #1047 where stripping a path corrupts the
909 heap. Waiting for feedback.
910 kes Correct the Mount message not to suggest labeling a new tape
911 when doing a restore. Submitted by email by John Stoffel.
912 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
913 FD by using casting. Reported in bug #1042.
915 kes A bit of crypto cleanup. More later.
917 Release Version 2.2.8
919 kes Apply patch from Martin to correct bug #1040, bscan sets existing
921 kes Fixed important spelling error in doc -- bug #1045.
923 ebl Fix bextract to be able to extract non-portable Win32 data to
925 kes Move initialization of read/write res lock earlier in the code.
926 This fixes the crash with a null conf file. This fixes bug
928 kes Redefine CURES in lib/parse_conf to be URES and move it all
929 into lib/parse_conf.c -- this responds to bug #1042, but does
930 not fix it. The fix is not to compile with FORTIFY_SOURCE.
931 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
932 the trunk SVN. I don't think this was reported as a bug.
934 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
936 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
938 kes Add DataDespooling and DataCommitting status (committing is
939 the last despooling).
940 kes Finish implementation of new reservations code noted below.
942 kes Fix bsnprintf for float point numbers. I broke recently when
943 parameterizing some variables. This fixes bug #1036.
944 kes Undo recent reservations changes ... will apply them later
945 when they work better.
947 ebl Fixes #1034 which cause mysql to hang the connection after 8h
948 ebl Change default statistics target of filename.name and path.path
949 fields for PostgreSQL. This speeds lookup by indexes. Thanks
951 kes A few more tweaks to new reservation code. Make sure to clear
952 vol released flag when retaking volume. When reading label and
953 label is bad mark volume unused. When recycling, mark volume
954 unused so it can be renamed.
956 kes Fix reserve_volume() so it doesn't release a volume in use
957 (i.e. a volume entry not marked released). This should be
958 the last part needed to fix bug #1018.
960 kes Move Heartbeat documentation from Job to Director resource.
961 This fixes bug #1033.
963 kes Fix existing switch drive SD code to call autochanger to release
964 any old volume. This must be done to keep the autochanger from
965 releasing subsequently newly reserved volumes in doing a close().
966 This should fix bug #1018.
967 kes Fail if attempting to get console input in batch mode. This
968 should help fail RunScript console commands that are incomplete.
969 kes First cut implementing switch_drive() in SD (not actually called).
971 kes Implement first cut running console commands in a RunScript.
973 ebl Fixes bug #1028 where 'Selection Type' option was not usable
975 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
978 Release Version 2.2.7
980 kes Add new free_tls() entry point so that Win32 builds.
981 kes Fix compile warning in src/lib/util.c
982 kes Fix entry point for edit_job_codes() so that Win32 builds.
983 kes Fix seg fault Frank Sweetser reports in regression testing
984 on his systems. The problem was that the original author of
985 bsnprintf.c did not take into account the side effects of
986 using ++x in the argument to a #define.
987 kes Make SD protocol backward compatible with version 2.2.x.
989 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
990 because Bacula no longer restores sockets.
991 ebl Always use ignorecase fileset option on win32 FD.
993 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
994 that implements double quoting include names in conf files,
995 and also allows piping input by having the first character
996 be a vertical bar (|).
997 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
998 that implement %f in RunScripts to pass the FileSet name.
999 kes Skip leading | when lex input comes from a pipe as suggested
1000 by Michael Stapelberg <michael@stapelberg.de>.
1002 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
1003 Nerijus Baliunas <nerijus@users.sourceforge.net>
1005 kes Implement Plugin Directory and plugin events.
1007 kes Implement a security enhancement: TLS authentication but no
1008 encryption. Enabled by setting 'TLS Authentication = yes'.
1009 Note when this is on, TLS encryption is turned OFF!
1011 kes This patch corrects a problem where the maximum concurrent storage
1012 jobs counter gets out of sync during restore jobs causing jobs to
1013 'wait on max Storage jobs'. This patch fixes bug #1009.
1015 kes This patch fixes bcopy so that it produces correct Volumes.
1017 kes This patch eliminates spurious output to the console during a VerifyVolume
1018 job that contains encrypted data. It fixes bug #1024.
1020 kes This patch prevents the 'status dir' command from trying to use a scratch
1021 volume and possibly moving it from one pool to another. This patch fixes
1024 kes Add new include to postgresql.c suggested by Marc Cousins so
1025 that it compiles correctly with pgre version 8.3.
1027 kes Fix --archivedir addition to configure. Replace it with
1028 --with-archivedir in configure.in This fixes the regression
1030 kes This patch fixes bug #1012 where the job is canceled because
1031 of Max Run Time exceeded when the job has not yet started.
1033 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
1034 one 'part' to write. Instead of each part being stored on disk,
1035 written to DVD, then deleted from disk, all parts are written to disk,
1036 and only the last is written and deleted from disk.
1037 kes This patch fixes the status command to include the formating string for
1038 JS_AttrInsterting. It fixes bug #1021.
1039 kes This patch should fix the Mac OS X build problem on the latest
1040 Darwin, where sys/types.h was not included correctly (apparently
1041 due to a change in the Mac headers). The solution was to explicitly
1042 ensure that it is defined for the ./configure.
1043 This patch also has a rebuild of configure that includes the Debian
1044 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
1045 kes This patch should ensure that queued messages to the console are
1046 displayed as soon as possible. It should fix bug 1007, but has been
1047 reported not to work.
1049 kes This patch fixes the infinite loop when trying to increase the
1050 maximum number of volumes in a Pool during the add command.
1051 This patch fixes bug #1008.
1053 Release Version 2.2.6
1055 db Remove extra data on estimate command in joblist for bat.
1057 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1058 really change anything, but is the beginning of doing it *right*.
1059 To do it completely right the LastWritten date must be passed to
1060 the SD, but it is not yet done.
1061 kes Minor tweaks to some bat restore SQL.
1062 kes This patch fixes bug #1003 where putting the message output from
1063 a Verify job into the catalog results in a recursive loop. The problem
1064 seems to show up only with postgresql (to be verified).
1065 kes Correct %x to %p in postgresql debug statement.
1067 kes Fix bug #942 where lots of emails where generated when the heartbeat
1068 interval was low and Bacula wanted a different tape from the one in
1071 ebl Add new SD despooling attributes and Dir inserting attributes
1072 job status codes in the catalog (Status table).
1074 ebl Use qmake-qt4 instead of qmake when available (debian system).
1076 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1077 that passing the password via the command line (arg 3) is insecure.
1078 This responds to bug #990 (it doesn't fix it).
1080 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1081 kes Fix a crash in bat when it cannot connect to the Director for example
1082 if the Director is not running.
1083 kes Remove redundant INDEX (JobId) from File table in the trunk.
1084 This fixes bug #992.
1085 kes Make explicit exception to GPL in LICENSE to permit linking
1086 the Win32 FD with Microsoft VSS code.
1087 kes Apply the Solaris package patch from
1088 Masopust, Christian <christian.masopust@siemens.com>
1089 kes Apply the patch to optionally add a timestamp in the debug output
1090 submitted by Mariusz Czulada <manieq@wp.eu>.
1092 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1093 backend (sql_strerror). Fixes bug #989
1095 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1096 It applied with no problems.
1097 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1098 awk are on the path.
1099 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1100 since the status is returned on stderr on Solaris.
1101 kes Activate Close button on tray-monitor window. This fixes
1103 kes Check for NULL item in parse_conf.c before calling it. In the
1104 case of Device, there is no item and this caused a seg fault when
1105 Device appears in the conf file.
1106 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1107 avoids pulling in config.h multiple times in some new code.
1109 kes Fix spurious warning message printed when creating a volume with
1110 a LabelFormat. This fixes bug #976.
1112 Release Version 2.2.5
1114 kes Add JobId in place of Job name in all the Jmsg() output.
1115 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1117 kes Make maxvol-test and new more strict maxvol2-test work.
1118 kes Print JobId in all Jmsg() job output.
1120 kes Add new SD despooling attributes and Dir inserting attributes
1121 job status codes. This fixes bug 961.
1122 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1124 kes Fix doc issue. This fixes bug #963.
1125 kes Fix listing performance problems in bat. Pointed out by
1127 kes Remove old debug code.
1128 kes Fix bat code that tests for Win32. This should fix bug #968
1129 kes Query 5 list wrong Vol after migration. This fixes bug #960
1131 ebl Fix #969 where user can't change Replace option in restore menu.
1133 kes Save jcr in thread specific data (tsd) for each thread.
1134 kes Make Dmsg() print JobId as -%u.
1135 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1136 for the thread if it exists.
1137 kes Remove old reservation debug jid code.
1138 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1139 ebl Add an option that permit to specify spool size in job
1140 definition. (Applying patches/testing/spoolsize_per_job.patch).
1141 You must upgrade SD and DIR at the same time.
1142 dvl Add new configuration item --archivedir
1143 dvl Adjust regression tests to use tmp not /tmp. This will allow
1144 multiple concurrent runs of the regression tests.
1146 kes Fix race condition that drops final block written to volume.
1147 This happens in rare cases with multiple simultaneous jobs
1148 when the Volume fills. This fixes bug #964. May be related
1149 to bug #935 and possibly #903.
1150 kes Eliminate more strerror() and replace with bstrerror().
1151 kes Remove BSD getopt and replace with unrestricted IBM version.
1152 kes Fix Win32 build for changed calling sequences.
1153 kes More tweaks to the mount volume routines to get everything
1154 right. Changed variable name from find to have_vol, which is
1155 much easier to understand.
1156 kes Enhance btimer debug code.
1158 kes Fix FD->SD authorization failure, which was due to spurious
1159 wakeups from a pthread_cond_timedwait(). Simply check the
1160 predicate before continuing. This fixes bug #953.
1161 kes Add const char where needed (more to do). Remove temp debug code.
1163 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1164 kes Don't overwrite error message in check_tables_version.
1166 kes Unlock batch insert tables with same calls used elsewhere.
1167 kes Allow starting 59 jobs a second.
1168 kes Make SD session key more random.
1169 kes Add retry for SQLite opening db if it fails. Probably helps
1171 kes Suppress extra error messages during batch insert failure.
1173 kes Add jcr to timer packets so if killed message can be sent to job.
1174 kes Add JobId to all Dmsg() output.
1175 kes Put some FD auth code on dbglvl rather than fixed.
1176 kes Return insert attributes error message in db msg buffer to avoid
1177 false error messages. Helps fix bug #966.
1178 kes Separate batch init error messages. Probably helps fix bug #966.
1179 kes Make SD code that contructs attribute insert check string lengths
1181 kes If Dir gets an error during inserting attributes, cancel SD.
1182 This reduces unnecessary error messages.
1184 kes Correct search boolean for getting Volume info
1185 ebl Cleanup batch insert code. Probably fixes bug #965.
1186 kes Back out one small change to the reservation system (reserving a volume).
1187 kes Rework how a Volume is mounted. It is now much more intelligent and
1188 will always attempt to use any mounted volume if possible and reduces
1189 calls to the Director asking about volumes.
1191 kes Turn off some code when batch insert not enabled.
1192 kes Edit FD name in connect error messages.
1193 kes Rework the reservation system to take into account that the Director
1194 might give us a Volume that is different from the current one being
1195 used, and to ensure that we don't exceed Maximum Volume Jobs.
1196 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1197 fatal error with multiple jobs running'
1198 kes Add more debug code in reservation system.
1199 kes Implement maxvol-test to check bug #947.
1201 kes Add code to handle tray monitor separated from Win32 FD.
1202 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1204 kes Add missed return in fixing verify bug -- trunk only.
1205 ebl Fix a command parser issue causing a director segfault.
1206 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1207 This fixes bug #954.
1208 kes Increase the max block size to 4MB fixes bug #957.
1209 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1210 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1211 is not properly mounted (recognized) during a poll.
1212 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1213 Job that has differences reports Verify OK.
1214 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1216 ebl Add an option to operate on all pools with update vol parameters.
1217 This complete the project 20. Patch from Nigel Stepp.
1218 ebl Add history support to bconsole when using readline.
1219 Using Ctrl-D to exit doesn't update .bconsole_history
1220 kes Modify new volume algorithm to use max MediaId for generating next
1221 volume number rather than the count of Volumes. This should essentially
1222 eliminate the failure rate if some volumes were deleted. Bug #921.
1223 kes Begin implemention of Optimize Job Scheduling.
1224 kes Implement restore callback that Dirk and I agreed on for bat
1225 restore. This fixes bug #928. Restore of backup of zero files fails.
1226 kes Fix SQL Catalog logging which broke with new db_escape_string
1229 Release Version 2.2.4
1231 kes Fix bacula_cats.def for new db_escape_string().
1232 kes Increase size of name string when FD making connection to SD.
1233 May fix bug #953. FD->SD connection failure.
1235 kes Add code to help Dan debug 2drive-incremental-2disk test.
1236 kes Add code to try to fix bug #908.
1237 kes Add waits to multiple exit detection code to try to force pid
1238 file to always be deleted.
1239 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1240 This fixes bug #950.
1241 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1242 trying to switch drives by checking for blocking before unblocking.
1244 kes Cancel storage daemon in all cases where FD reports error. This
1245 should fix virtually all cases of bug #920.
1246 kes Fix db_escape_string() for MySQL which did not compile.
1248 kes Fix error message that was clobbered when Dir tells SD it does not
1249 have write permission on Volume. This should fix a minor point
1250 in bug #942, but not the main problem.
1251 kes Add code to cancel job in SD if FD connection fails. This should
1253 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1254 dvl Pass jcr and db into db_escape_string() to enable better escaping
1256 kes Fix migration code to get correct Volume name with multiple volumes
1257 by skipping |. Fixes bug #936.
1258 kes Implement patch supplied by Landon to fix bug #944 where using
1259 TLS with bconsole uses 99+% of the CPU.
1260 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1262 kes Move patches into patches directory.
1264 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1267 ebl Using 'm' in bconsole will show messages like before,
1268 and not memory usage.
1269 kes Fix bug #935, and probably also bug #903 where files were not
1270 restored. MediaId was not properly set in JobMedia record after
1273 kes Suppress chown and chmod error messages if the FD is not running
1276 kes Apply Martin Simmons' patch that should turn off the new API usage
1277 when batch insert is turned off allowing building on older
1279 kes Add ./configure search in qwt-qt4 for qwt package
1281 kes Bacula is now free of 3rd party GPL copyrighted code!
1282 kes Remove idcache.c
1283 kes Add guid_to_name.c/h which replace idcache.
1284 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1286 ebl Detect if new PosgreSQL batch insert API is present.
1287 kes Correct incorrect mempool call causing Director crash. Occurs on
1288 systems without va_copy().
1289 sb Update spec files for 2.2.1 release
1291 kes Fix memory pool call in ua_output.c. bug #934.
1292 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1293 Add test program to fnmatch.c
1295 kes Integrate patch to README.vc8 from
1296 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1297 edit it to get it into Unix patch format.
1298 kes Implement mkpath.c to replace old FSF makepath.c
1300 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1302 Release Version 2.2.1
1304 kes Update POTFILES.in
1305 kes Cleanup a few underquoted AC_DEFUNs in configure
1306 kes Apply patch from Martin Simmons that adds a test for va_copy to
1309 kes Fix bug #921 by increasing the number of tries to create a new volume
1311 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1312 can be called multiple times. Implement a version for machines
1313 without va_copy() that gets a big buffer.
1315 kes Integrate more portable zone offset code into bsmtp.c
1316 Submitted by Attila Fülöp.
1318 kes Fix bad SD->FD return status reported by
1319 (James Harper) <james.harper@bendigoit.com.au>
1320 ebl Fix a bug in read_close_session which return random status
1321 thanks to James Harper
1323 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1324 and directory names during restore of single file/directories.
1325 kes Add sanity checks to .sql command when string is empty. Hopefully
1326 that will resolve Dirks Director crash.
1328 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1329 in the bsmtp chat subroutine when debug is >= 10.
1331 kes Fix Director crash when running bat SQL queries.
1332 kes Add David's notes on Item 8: Copy pools.
1334 kes Rework projects file to be current and ready for a vote.
1335 kes Enhance lex scanner error message.
1337 kes Tweak LICENSE file to mention BSD code.
1338 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1339 if specified on the ./configure.
1340 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1341 This class is intended to allow us to open a second bsock to the
1342 Director while in the restore subdialog.
1344 kes Fix configure to create bat Makefile before creating dependencies.
1345 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1346 kes Add a tooltip to the tray monitor.
1347 dvl Set the Director's PID file before dropping privs. This fixes
1350 kes Update AUTHORs file
1351 kes Increase the default max concurrent jobs to 20 in FD and SD to
1352 correspond with the default .conf files.
1353 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1354 some different, of the same file created by RN when porting the
1356 kes Rearrange some of the Win32 directories and the placement of the files
1358 kes Set DEVELOPER flag in version.h
1360 ========================================================================
1361 Release Version 2.2.0
1363 kes Apply a second doc patch from Marc.
1364 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1365 improves the tips section that discusses how to setup multiple
1368 kes Update bat README file.
1369 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1370 corrects a typo in the Recycle status check in db_find_next_volume().
1371 This will probably fix a number of annoying problems with multiple
1373 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1374 bnet calls -- no functionality change.
1376 kes Modify the Verify output to specify if files are missing on
1377 the Volume(s) or disk. Fixes confusion in bug #916.
1378 kes When more than one Volume is read in a migration job, the last
1379 Volume bytes reported are from the last read volume rather than
1380 the last written volume. Fixed. This fixes bug #910.
1381 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1382 It previously printed New Recyle flag is: no. This fixes bug
1385 kes Correct seg fault when switching tape drives during restore.
1386 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1387 be used until after 2.2.0 release.
1389 kes Remove fnmatch() in SD that permitted wild card specifications.
1390 This fixes bug #914.
1392 kes Fix %g in filename returned by SQL for browse tree reported by
1394 kes Fix configure so that it puts config.out in the cwd rather than
1396 kes Attempt to fix the locking problem reported by Eric in bug #906.
1397 kes Make berrno class to leave errno unchanged after constructor call.
1398 kes Make bnet_server use the heap rather than the stack to allocate
1399 its socket fd pointers to avoid a crash at termination. Problem
1400 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1402 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1403 and putting it in depkgs-qt along with Qt4.3.
1405 kes Rework code in acquire.c that switches drives for reading when
1406 the Media Type does not match. This should fix bug #906
1408 ebl Fix a director segfault during job setup #907
1409 kes Correct seg fault in postgresql when first operation returns no
1410 rows. Fixes Dirks File browser problem seg fault with bat.
1412 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1413 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1416 kes Implement PopUp YES/NO dialog for bat.
1418 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1420 kes Correct RunScript to terminate job in FD on failure.
1421 kes Change abort_on_error and AbortJobOnError to fail_on_error
1422 and FailJobOnError in RunScripts.
1423 kes Minor tweaks of code formating in RunScripts, principally to
1424 avoid depassing 80 columns.
1426 kes Eliminate one #ifdef Win32 in bsmtp
1427 kes Implement grow tool to grow a file for testing very large databases.
1428 kes Add big-vol-test to test Bacula seeking with > 5GB.
1431 kes Modify find_next_volume() to return all values in Media record.
1432 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1436 kes Update Release notes
1438 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1439 Warning, in previous beta version, all media get from scratch keep their
1442 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1443 This should fix bug #842. Made a note to look at removing the temp
1444 files at the end of the install.
1445 kes Add ability to mount and unmount a file device providing it is
1446 marked as being removable and has the appropriate mount and unmount
1447 commands defined in the Device resource. This fixes bug #830.
1448 kes When applying a storage override, release all previous storage
1449 definitions rather than just prepending the new storage.
1450 This should prevent a good deal of confusion.
1452 kes Implement ./configure search for qwt libraries.
1454 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1455 Win32 FD. This should fix bug #893.
1456 kes Remove an unnecessary beep in Win32 init code.
1457 kes Update copyright dates in Win32 executable about boxes.
1458 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1459 code with a BSD getopt.c and getopt.h.
1460 kes Remove sched.h from the Win32 compat directory -- not used.
1461 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1462 need to shut it down, do it through the services panel or the command
1464 kes Remove some inappropriate Bacula FSFE copyrights.
1465 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1466 kes Fix regress config non-portable test as pointed out by
1467 Florian Heigl <florian.heigl@gmail.com>
1468 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1469 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1471 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1472 Reported by Frank Sweetser.
1476 kes Fix client-only build.
1477 kes Integrate client-only fixes for bsys (initgroups) and conio from
1478 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1479 kes Make arguments to get_scratch_volume() in same order as other
1481 kes Rework the prune_volumes() subroutine so that after purging and
1482 no volume found in desired pool, it will check for a scratch
1483 volume. This prevents recycling the whole scratch pool.
1484 kes Add code to status storage to print boffset_t (largefile support).
1486 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1487 kes You now need a --with-qwt=<dir> to be able to build bat.
1488 kes Update src/win32/cats/bacula_cats.def to include the new
1489 db_get_query_dbids() call on Win32.
1491 kes Correct a problem when selecting a scratch volume and moving
1492 it to another pool that lost some columns.
1493 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1494 kes Enhance Autochanger error messages to include Volume and device name.
1495 kes Rework prune_volumes() code to take account of InChanger flag,
1496 and to handle recycling volumes going to the Scratch pool and
1497 current pool because the RecyclePool directive.
1498 kes Implement a better and more efficient db_get_query_dbids() to
1499 handle creating and passing back a list of DBIds.
1503 kes Start work on new more efficient DBId subroutine. First use
1504 will be for recycling volume to Scratch inchanger.
1505 kes Increase number of JobIds in pruning from 1000 to 10000.
1506 This to be replaced by above routine.
1507 kes Begin implementation of building Qt4 on Win32.
1508 kes Correct typo in fix I added for bad TLS shutdown.
1509 kes Pull 2.0.3 patches into patches directory.
1510 kes Update Release notes. Include qt-console in line count.
1511 kes Update Projects file.
1513 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1514 bug in migration code where a job that spanned two volumes
1517 kes Implement new BST_DESPOOLING blocked state. Change from locking
1518 during despooling in SD to blocking. This means that other threads
1519 can work with the device structure, in particular the reservations
1520 system while despooling.
1522 kes Fix return in reservation message queue that missed clearing
1523 the jcr lock (implemented 26Jun07 below).
1524 kes Rename a number of dev methods to make locking function names
1526 kes Document locking in lock.c. Move lock structures to new file
1529 kes Move reservations message lock to lock jcr only this
1531 kes Move main SD locking code into lock.c (new file).
1532 kes Update Win32 build to include lock.c
1536 kes Dirk committed the qwt library code for drawing graphs in bat.
1537 kes Tweak install of qwt so that it is integrated with ./configure.
1539 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1540 out by Eric (my typo).
1541 ebl Fix configure.in to get batch mode enable
1542 kes Return correct string from authenticate.cpp in bat when connecting
1544 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1545 spurious line drops when using TLS.
1546 kes Do not file reparse points when restoring a file that already
1549 kes Implement Windows reparse points -- similar to directories, but
1550 we do not descend into it. This is a first cut. They seem to
1551 be backed up, but restore is not yet tested.
1552 kes Remove restore_blocking in tls code when shutting a socket to leave
1553 it in blocking mode. Hopefully this will fix the encryption bug
1554 reported by Frank Sweetser.
1555 kes When opening a file for backup, tell the OS that we are going to
1556 read it sequentially -- optimization.
1557 kes Change variable names in authenticate_director() to not conflict
1558 with member names in bat. Caused great confusion with compiler,
1561 kes Queue openssl error messages in case of comm problem.
1562 kes Do shutdown() call if socket terminated.
1563 kes Remove some duplicated code in tls.c
1564 kes Move more of the bsock member variables into private and access
1566 kes Add Frank Sweetser's tls-test to the regression suite.
1568 kes Add Swedish sv.po file
1570 kes Don't print clock skew message in FD if less than 3 seconds diff.
1571 kes Add a bit of VSS info to status client.
1572 kes Implement a first cut of Vista VSS, using Win2003 code.
1574 Release: 2.1.20 beta
1576 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1577 loaded tape but uses first drive).
1578 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1579 This was indeed a Win32 issue.
1581 kes Simplify search of autochanger for in-use Volume.
1582 kes Fix exit condition of check for in-use volume. kes Remove
1583 inappropriate my_postgresql_free_result() in db_close()
1585 kes Fix bad return in FD when encryption signature not found.
1586 Probably caused a crash.
1587 kes Inhibit missing encryption signature error messages for
1588 file types where no signature computed.
1589 kes Correct inverted check on autochanger in reservation system.
1590 kes Tweak debug code in autochanger reservation.
1592 kes Add some additional locking in the cats directory in subroutines
1593 that modify packet variables called from batch insert.
1594 kes Rework how dcrs are allocated. new_dcr() can now be called
1595 with an existing pointer, and it will simply clean it up.
1596 This allows the reservation system to test various different
1597 devices, and will permit easy device changes.
1598 kes A bunch of changes all over to handle new new_dcr() calling
1600 kes Work more on the Volume management in the SD. Remember Volumes
1601 for tape drives and for autochangers (even virtual disk changers).
1602 kes When looking at the Volume list to reserve a drive, handle
1603 autochanger names correctly by interating through the changer
1604 devices. Also call the Director to see if a Volume is suitable
1605 for the current job.
1606 kes Fix some bugs in bscan. Make sure all media records are written.
1607 Make sure that valid JobMedia records are written for disk files.
1608 Previously they were completely wrong.
1609 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1610 that the URLs don't change and so that the developers will all
1611 work off the same copy. Rebuild from scrach.
1612 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1614 Release: 2.1.18 beta
1616 kes Fix seg fault in FD from incorrect digest size.
1617 kes Fix argument to non-OpenSSL crypto.c subroutine.
1619 Release: 2.1.16 beta
1621 kes Remove a few malloc()s from the encryption code.
1622 kes Use the class calls to bsock in filed/backup.c and restore.c in
1623 place of the old bnet_xxx code.
1624 kes Implement code that does an on the fly calculation of the
1625 signing digest during restore of encrypted files. It makes
1626 a best guess at the algorithm, and if it is not correct, will
1627 then revert to the old code which reads the file after it is
1629 kes Implement at least one missing crypto stream in stream_to_ascii()
1630 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1631 #877 where a reload with bad syntax causes Dir to exit.
1633 Cut: 2.1.14 beta (not released)
1635 kes Do not free a volume on a tape drive until another volume is
1636 mounted and read, or the autochanger unloads the volume.
1637 This should help the SD re-use volumes that are already mounted,
1638 and should fix bug #886.
1639 kes Apply patch from user brettedgar that allows gnome2-console include
1640 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1641 kes Apply patch from Lucien Weller that fixes day of week calculation
1642 because of DST flag problem. Fixes bug #887.
1644 kes Move find_next_appendable_volume() to after acquiring a valid device
1645 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1647 kes Unable to reproduce bug 872. However added additional testing for
1649 kes Bug #874 resolved by documenting SQLite limitations.
1650 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1651 kes Bug #881 resolved by removing typo in mtx-changer script.
1652 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1653 approval. Added a link to the wiki on the web page, and implemented
1654 a backup from http://paramount.ind.wpi.edu
1656 kes Fix update allfrompool to pass pool name.
1658 kes Convert to pure GPL v2 license.
1659 kes Fix sscanf problems reported by Peter Buschman that caused
1660 a bus error on Solaris.
1661 kes Rework (simplify) the select prompt in bat.
1662 kes Move get_jobid_from_tid() into lib and create a
1664 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1665 should definitely fix the problem of lost error messages in the
1667 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1668 kes Eliminate tcpd.h from the project. Enclose the #include from the
1669 library with extern C ...
1670 kes Add print of signal name when a signal is trapped.
1672 Release: 2.1.12 beta
1674 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1676 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1677 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1678 makes SQLit3 run 30 times faster, though a bit less safe.
1679 kes Implement --with-batch-insert in configure and detection of thread
1680 safe libraries. It is on by default, but turned off if no thread
1681 safe library (e.g. SQLite 2) is available.
1683 kes Fix Bacula PostgreSQL buffer overruns.
1684 kes Do better checking for NULL results returned from PostgreSQL;
1685 implement retry for failed queries; clear results buffer after
1686 failed query. Hopefully this will correct the PostgreSQL failures.
1688 kes Implement algorithm to handle only one appendable volume with
1689 Prefer Mounted Volumes = no.
1690 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1691 returned from a query.
1692 kes Make volume lock recursive.
1693 kes Implement an additional volume reservation algorithm that
1694 starts by considering all reserved volumes then uses the
1695 old brute force algorithm of searching the resources to
1696 find a suitable device.
1697 kes Add new reservations debug code and refine the old code.
1698 kes Update the win32/dll/bacula.defs file.
1700 kes Tweak reservations algorithm to permit a few more cases, i.e.
1701 volume reserved, but on different drive, ...
1702 kes Enhance SD status to include Pool and Media Type for drive in a
1703 more readable format (a bit longer).
1704 kes Fix PostgreSQL double free.
1706 kes Minor refactoring of restore decryption code.
1707 kes Add code to smartall.c to detect double free of a buffer.
1709 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1710 so that bsmtp will create a correct email address (mailbox only).
1711 kes Modify 'memory' command so that the buffers are listed as 'In use'
1712 to avoid confusion with Orphaned buffers.
1713 kes I reworked the OpenSSL include/lib flags to be handled in
1714 the standard Bacula way, which should fix bug #863 concerning
1715 non-standard OpenSSL libraries.
1717 kes Implement Help Browser window for bat.
1718 kes Fix reload bug that reset StorageId to zero.
1720 kes Fix TLS #ifdefing when TLS turned off.
1721 kes Ensure that when labelling a tape with Slot=0 that InChanger
1723 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1725 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1726 add DISTINCT (required by PostgreSQL).
1727 kes Implement BSOCK authenticate_director() method. Eventually will
1728 authenicate all daemons.
1729 kes Move several more functions into the BSOCK class.
1731 kes Add code to tell the OS that we no longer need a cached
1732 file that we were reading. In findlib/bfile.c. Also,
1733 only cache files that we are reading. Thanks to
1734 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1735 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1736 kes Implement script to automatically generate cats and dll .def
1737 files for Win32 dll.
1738 kes Update README.mingw32 to include new .def file generation.
1739 kes Correct typo in UTF-8 error message as reported by:
1740 jhernandez <julianhernandez@gmail.com>
1741 kes Add additional sm_check() code on debug level 1.
1742 kes Set default debug level to 1.
1743 kes Trap SIGABRT in attempt to get traceback.
1745 kes Reduce bat connect timeout from 30 to 15 seconds.
1746 kes More restructuring and implementing BSOCK class in place of
1748 kes Remove a few unnecessary malloc() tests in crypto code.
1749 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1750 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1751 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1753 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1755 kes Fix Verify InitCatalog. The attributes were not pointing to the
1756 correct saved location.
1757 kes Implement message callback so that GUI is sure to get all
1758 daemon messages. Currently displayed in a dialog in bat.
1759 kes Ignore SIGUSR2 (Bacula timer) in bat.
1760 kes Apply regress patch from bug #859 to allow regress to work
1761 with Solaris compiler.
1763 kes Begin adding TLS support to bat.
1764 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1765 clean up lex.c and make it more readable.
1767 kes Move more bnet functions into the BSOCK class.
1768 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1769 kes Complete change of berrno strerror() method to bstrerror()
1771 Release: 2.1.10 beta
1773 kes Cleanup incorrect email addresses in bsmtp.
1774 kes Make bat display initial messages rather than discard them.
1776 kes First cut of adding .mod to the run command.
1777 kes Implement auto display of messages in bat.
1778 kes Enhanced preferences to allow all Bacula output to be
1781 kes Try to make bsmtp date routines more generic.
1782 kes Fixed bug #856 autochanger documentation.
1783 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1784 kes Add new cats entry point so Win32 builds.
1786 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1788 kes Do better checking for the MySQL 64 bit libraries looking for both
1789 .a and .so libraries.
1790 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1791 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1792 kes Require the thread safe version of MySQL during configure. Thanks
1793 to Andre Noll for pointing this out.
1794 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1795 continuing in migration code.
1796 kes Apply implementation of tray-monitor font derived from gnome-console
1797 submitted by Andreas Piesk <a.piesk@gmx.net>
1799 kes Eliminate important memory loss in SQLite
1800 kes Fixed the batch insert MySQL thread specific data that was not
1801 being freed. See cats/mysql.c:db_thread_cleanup().
1802 kes Fix restore before command.
1803 kes Convert old hdr.name to name() in a few places.
1804 kes Implement update jobid command.
1805 kes Return all time_t dates in db_get_job_record()
1806 kes Stop watchdog in SD earlier.
1807 kes Put Pool just after Storage in please mount message.
1808 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1811 kes Update the po files.
1812 kes Fix Verify InitCatalog by making it cache attributes.
1814 kes Change name bacula-bat to bat for man 1 page to correspond to
1816 kes Check for client and store NULL pointers in status command. This
1818 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1819 kes Fix sign extended editing of %p.
1820 kes Clean out a little old #ifdefing in cats/mysql.c
1822 kes If time diff between DIR and FD is more than 600 seconds convert
1823 INFO message to WARNING.
1824 kes Implement heap size display in status for all daemons.
1825 kes Attempt to fix MySQL db open memory loss (not successfull).
1826 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1827 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1828 Query. This looks like a MySQL but but by doing extra releases,
1829 the memory goes away. This should fix bug #847.
1831 kes When backup fails, cancel SD before waiting for sd termination.
1832 kes If SD is waiting for FD to connect during cancel, wake up the
1834 kes Fix fsf code so that errno is correctly reported.
1835 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1837 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1838 so that Bacula doesn't later stumble into a seg fault.
1839 kes Use the term Restore Client in the restore Job report.
1840 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1841 the original job's FileSetId.
1842 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1843 spooling in migration jobs. Not yet tested.
1844 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1845 reading conf file from a pipe. However, do it with open_bpipe()
1846 rather than popen. Not yet tested.
1848 kes Fix an ugly bug where the VolCatBytes were getting updated
1850 kes Implement bconsole memory command that prints current memory
1851 usage, plus smartalloc dump.
1852 kes Clarify some error messages in backup, admin, and migrate.
1853 kes Shrink label dialog to smaller size.
1854 kes Invert Cancel OK buttons on restore to be OK Cancel.
1855 kes More strerror() to bstrerror() conversions.
1857 kes Start implementing bstrerror() in place of strerror().
1858 kes Stripping path -- seems to work.
1860 kes Prevent door and port files from being restored (mostly
1862 kes Free an unreleased buffer in compat code.
1863 kes Change console Job name from *Console* to -Console- to eliminate
1864 Win32 filename problems. Put Win32 path separator when creating
1865 Console file. This fixes bug #846.
1866 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1868 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1870 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1871 to force Win32 error message.
1873 kes First cut strip path. The data should be passed to the FD,
1874 but nothing is done with it yet.
1875 kes Enhance the digest and signature routines in the crypto
1876 library to accept a JCR and to use it to print error messages
1877 so that they will go in the Job report rather than the daemon's
1879 kes Simplify some of the verify signature code.
1880 kes Simplify a few of the alternative returns in the signature
1883 ebl Use only POSIX regex instead of GNU regex in breg.c for
1884 File relocation. It fix broken freebsd compilation.
1885 kes Convert all other Dir files to use new ua class message
1887 kes Tentative fix for missing digest signature in bug 807.
1888 kes Correct handle problem in new win32_ftruncate routine.
1889 kes Convert ua_purge.c and ua_update.c to use new ua class
1890 message routines for bat.
1892 kes Correct incorrect installation of LICENSE in Win32 installer.
1893 kes Display LICENSE at the beginning of the Win32 install.
1894 kes Attempt to correct the need for the png files to be installed
1896 kes Reapply my bat.conf install script in qt-console. I think I
1897 editted bat.pro instead of bat.pro.in and it was lost.
1898 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1899 the /var/lock/subsys for subsysdir. Also corrects typos in the
1902 kes First cut update job.
1903 kes Correct configure to include qmake of src/qt-console directory.
1905 kes Make restore job yes/mod/no print in one command so GUI works.
1906 kes First cut implementing backup and restore client.
1907 kes Correct editing in Verify output that caused a seg fault.
1909 kes Insure that bat.conf is not overwritten during installation.
1910 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1911 while I was implementing migration in March 2006 !
1913 ebl Cleanup file relocation, using char *RegexWhere instead of
1914 char *where + bool where_use_regexp
1915 kes Update some manpages and add bat manpage.
1916 kes Make a first cut at converting bacula.spec.in for bwx-console
1918 kes Apply patch from John Goerzen to add hostname as fourth argument
1919 to make_catalog_backup script.
1920 kes Fix typos I introduced into bsmtp.c
1921 kes Make pm_strxxx() routines handle input of NULL pointer. This
1922 is to protect from NULL pointers returned from SQL databases.
1923 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1924 kes Add more debug to FIFO code -- fix fifo regression test.
1926 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1927 kes Add thread timer to bnet_connect() to break from OS if wait time
1930 kes Update Win32 build to include new files, new symbols, and
1932 kes Implement socket level heartbeat (tcp_keepidle)
1933 ebl Commit File relocation patch
1934 kes Make bat have 'make install' target.
1935 kes Warn during install if old gnome-console binary found.
1936 kes Warn during install if old wx-console binary found.
1937 kes Add -8 option to bsmtp command line to add content type utf-8.
1938 Fixes bug #809. (Character coding problem in bsmtp).
1939 kes If < is found in target (from, to, cc) then do not enclose the
1940 target in < > in bsmtp. Fixes bug #772 (malformed address).
1941 kes When printing certain items in dbcheck, stop after 300000.
1942 Fixes bug #822. (dbcheck loops).
1943 kes Incorrect status in Dir after waiting for mount with poll set.
1946 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1948 kes Print waiting to reserve a device every 5 mins.
1950 kes Don't call close_part in label.c if tape and relabel.
1951 kes Don't free volume if busy in close() -- should help with
1953 ebl Fix #824 RunScript bug (After script could be execute twice)
1954 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1955 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1956 Add a regression script to test RunScript
1958 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1961 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1962 deprecated. No additional bugs will be fixed, and they will be dropped
1963 in a future release (probably 2.4.0).
1964 kes Change name of wx-console to bwx-console to make it more Bacula
1966 kes Change the name of gnome-console to bgnome-console to make it
1969 kes Some time in March, a Feature Request with patch from Jorj Bauer
1970 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1972 The ability for the director to validate a Client (FD) CN against
1973 an arbitrary set of patterns rather than the hostname, with
1974 A new 'TLS Allowed CN' set of directives which are implemented
1975 in the Client resource. Then pattern matching is used in place
1976 of hostname matching against the Certificate's CN. As an example, we
1977 have certificates which (a) use a local CA, and (b) have a CN of the
1979 kes Add new/changed entry points to Win32 build
1980 kes Create unaccepted-projects for projects that are not accepted.
1981 kes Simplify locking in the reservations system.
1982 kes Add more debug code in reservations.
1983 kes Make sure error condition on reserving a volume is handled correctly.
1984 kes Correct handling of volume_in_use.
1985 kes Correct handling of initializing a device.
1986 kes Move handling of broadcasting releasing a device into release_device().
1987 kes Correct attaching dcr to dev so that it is only done if device
1988 is properly initiated.
1990 kes Locking debug level tweaks in SD.
1991 kes Tweak new Volume code.
1993 kes Add exec external-command [wait-seconds] to bconsole. This
1994 executes the external-command. Note! normally external-command
1995 should be enclosed in double quotes.
1996 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1997 it should normally be off in a production system.
1999 kes Implement die command for SD so that we can force it to dump.
2000 kes Implement SD lock debug code.
2001 kes Implement new algorithm for keeping Volume list in SD. It
2002 is now owned by the device.
2004 kes Implement new code for freeing in use volumes that should
2005 resolve if not all, some of the problems of multiple drive
2006 tape conflicts described in bug 801.
2008 kes Fix gui/bacula-web/images files in svn.
2009 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
2011 ebl Fix a bug in batch mode (in string escape)
2012 kes Correct migration prune SQL typo that crept in in a
2013 recent 2.1.x change.
2015 kes Move bnet_despool() into class in bsock.c
2016 kes Modify job report to include director name and Build OS.
2017 kes Move drop root privilege and check_catalog() before fork.
2018 kes Add update database scripts (version 9 to 10) to updatedb directory.
2020 ebl Check size and age of each file after its backup to see if
2021 it has changed during backup, if 'checkfilechanges' is set.
2022 The FD will do an extra check (stat(2)) after
2023 each file backup. mtime, ctime and size are compared with
2024 'before backup' information. If time or size mismatch, an
2025 error message will be generated. You must upgrade FD to use it.
2027 kes Make database name and user configurable
2028 --with-db-name=xxx --with-db-user=xxx
2029 kes Add back database type to message.c for debugging.
2031 kes Implement dir_sql() which issues an SQL query.
2032 kes Modify bat medialist to use dir_sql() and do some minor C++
2033 formatting as well as eliminating a number of pointers, simplifing
2036 kes Fix some of the mtx-changer grep commands for tape label readers.
2037 kes Convert a number of bsendmsg into the appropriate send/warning/error
2038 message class calls.
2039 kes Suppress the using database message in the .sql command.
2040 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
2042 kes Add context menu for floating a window.
2043 kes Some minor cleanup and name changes in qt-console
2044 kes Add doing mt setblk 0 in Win32 mtx-changer.
2045 kes Apply Martin's bug fix to move definition of ENODATA for
2047 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
2048 sqlite2 and sqlite3.
2050 kes More pruning cleanup.
2051 kes Turn on wait_for_drive by default in mtx-changer.
2052 kes Turn on Batch insert code by default as it now passes regression.
2053 kes Add ./configure --enable-bat to enable building of Bat.
2054 No install yet though.
2056 kes Implement a new .sql command for bat.
2057 kes Implement code to turn off pruning in obtaining the next volume.
2058 Pruning is turned off for the status dir command, but turned on
2059 for SD requests and for the list nextvolume command.
2061 kes Correct Qmsg() that was not updated correctly when committing a
2062 previous change (probably the recent TLS patch).
2064 kes Write new subroutine is_volume_purged() that explicitly checks
2065 if the Volume is purged, and if so marks it as such. This should
2066 resolve problems reported about needing to mount twice to recycle
2068 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2069 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2070 amount of duplicated code.
2071 kes Do volume pruning only for the Media Type desired (reduces pruning time
2072 if multiple Media Types are in the same pool).
2073 kes Implement more detailed info in the Job report for the Bacula version
2075 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2077 ebl Add bbatch tool to bench database and insert mode.
2078 Fix sql quote stuff in batch mode
2079 Fix sql stuff for mysql
2081 kes Correct problems with am/pm scheduling. Fixes bug #808.
2082 kes Implement new prunning code that prunes up to 1000 jobs at
2083 the same time. The same technique can be applied to a number
2084 of other prune/purge subroutines.
2085 kes Add an insanity check when starting a new tape job to ensure
2086 that the tape position has not been changed. If so fail the
2088 kes Fix Win32 build for dlls to add the folllowing:
2089 src/lib/bsock.c -- new file with new entry points
2090 src/lib/dlist.c -- new entry points
2091 src/cats/sql_create.c -- new entry point
2092 src/cats/sql_cmds.c -- new DATA item exported
2094 ebl batch mode cleanup bscan-test is ok now.
2095 kes Implement SD code to check length of disk volume before appending.
2097 kes Correct return status on db_batch... routines.
2098 kes Add call to db_write_batch_file_records() to migration code.
2099 ebl Fix AfterJob timing
2100 kes Move the checking of the database in initializion of the Director
2101 to after we drop privileges. This avoids the need for both root
2102 and bacula access to the DB.
2103 kes Correct a misplaced variable definition in src/filed/backup.c
2104 kes Correct how the new batch insert db_create_attributes_record()
2105 uses the arguments. Caused a seg fault in bscan.
2106 kes Implement lock() and unlock() methods in DEVICE class.
2107 Implement block() and set_block(xx) methods in DEVICE class.
2108 kes Modify bnet_connect() so that it uses time() to check for the
2109 wait time expiring (on some OSes, some system calls may not
2110 return immediately).
2111 kes Modify Verify to obtain the previous JobId when it is actually
2112 running rather than at schedule time (as it was in 1.38.x).
2113 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2115 kes When checking pid in pid file, continue running if the pid is
2116 the same as ours. This occurs on IRIX after a system crash.
2119 kes Extend new GUI API.
2120 kes Make the ua structure a class, and implement send_msg(),
2121 error_msg(), warning_msg(), and info_msg().
2123 kes Apply fix from for building wx-console on the Mac from
2125 kes Implement new select mechanism for GUI programs.
2126 kes Reorganize initialization of stackedWidgets in bat.
2128 kes Add updated nagios plugin supplied by Christian Masopust.
2130 kes More bat implementation.
2131 kes File migrate bug with Pool Occupancy using mediaid instead
2132 of jobids. Fixes bug #795.
2133 kes Fix orphaned buffers in filed backup and verify due to
2134 crypto buffers not freed during errors. Fixes bug #789.
2135 kes Extend new GUI api code to tree commands.
2136 kes Ensure that tree and dot commands check console ACLs.
2137 kes Permit marking directory with trailing slash.
2138 kes Allow 20 console connections (instead of only 10).
2140 kes Add smartctl call to bacula-sd.conf as an example of getting
2143 kes Modify jobq.c to let simultaneous restore jobs run. This may
2144 cause them to fail if they cannot get a drive.
2145 kes Add Client Connect Wait to Storage daemon to permit users to
2146 modify the time the SD waits for a FD connection.
2148 kes Correct virtual changer check which was backwards. This caused
2149 volumes to be unloaded into slots already occupied.
2151 kes Apply Command ACL filter to JobId list in restore command.
2152 kes Correct typeo in var.c patch.
2154 kes Don't let Bacula prune File or Job records for the current Job.
2155 kes Fix variable substitution pad + inc bug reported (with patch)
2158 kes Correct SQLite log table index as reported by Luca Berra.
2160 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2162 kes Begin implementing new comm signals for API.
2163 kes Fix a few places in lib/message.c where the open fd may
2165 kes Continue implementing lib/bsock.c (real class). Make jcr,
2166 who, host, and port private. There are new methods to access
2167 them for non-class use. This required touching a number of files.
2169 kes Add LANG=C to autoconf/randpass so it works with languages other
2170 than English. Fixes bug #788.
2172 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2174 You will not be able to generate Include/Exclude list any more.
2175 It will be fixed soon.
2176 If you want to use this, you can apply
2177 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2179 kes Restore of sockets created false error messages because Bacula
2180 no longer restores sockets, but the code was still trying to
2181 set the attributes on a non-existent file. Reported by a user.
2182 ebl finish RecyclePool feature
2183 Media will takes Pool.RecyclePool
2184 when moving from Scratch to a Pool or when user will do
2185 update volume=xxx frompool
2186 To use it, add RecyclePool = aPool to your Pool resource
2189 RecyclePool = Scratch
2193 kes Expand new BSOCK class adding signal() and new BNET signals.
2194 kes Begin enhancing the dot commands adding a new API function
2195 that returns more information and will make it easier
2196 to interface to the Director from a program.
2198 kes Make DEVICE fd private. Its new name is m_fd, and can be
2199 obtained with dev->fd() outside the class. This is the
2200 first of many DEVICE members to be made private.
2201 kes Implement Michael Renner's idea on having a virtual disk
2202 changer. I made some minor modifications (e.g. I did not
2203 implement the Virtual Changer directive, but simply set
2204 the Changer Command to an empty string.
2206 kes Implement a BSOCK send() method that writes the whole record
2207 in a single write() request rather than in two.
2208 ebl add update volume=xxx recyclepool=yyyy
2209 volume takes recyclepool from pool when using update volume=xxx from pool
2211 kes Fix encryption deblocking bug, which caused some restored files
2212 to be truncated. This fixes bug #763.
2213 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2214 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2216 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2217 ebl Use btime_t instead of uint64_t in media patch.
2219 kes Optimize the use of the database a bit in the Status dir command.
2220 Only open it when needed, ensure that if any previous database
2221 was opened, it is closed.
2223 kes Correct VolCatBytes bug from media patch.
2224 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2225 in the case of orphaned records.
2226 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2227 and File records in 300K chunks to be more efficient. This
2228 idea came from Juan Luis Frances (if I remember right).
2229 kes Apply Eric's scratch patch that moves a purged Volume to
2230 the RecyclePool. Question: how is RecyclePool set? what
2231 happens to the ScratchPool?
2232 kes Apply Eric's media patch that collects read/write media
2233 times as well as byte counts. This patch requires a
2234 simultaneous upgrade of the DIR and SD. Note, there
2235 should be some way to turn off timing. I'm not sure
2236 times are in Bacula units.
2237 kes Apply Eric's batch-insert patch.
2239 kes Update projects list.
2241 kes Implement Include/Exclude file lists in FD as dlists using
2242 the new dlistString class. This permits efficiently having
2243 large include/exclude lists and completes project Item 25.
2244 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2245 console is authorized to cancel the job. This fixes bug
2247 kes Modify SD so that the VolCatJobs medium record is updated
2248 at the beginning of a Job rather than the end. This
2249 fixes bug #775 where exceeding MaxVolJobs caused jobs
2251 kes Added a mutex around getting and setting Volume information
2252 so that multiple simultaneous jobs will single thread.
2254 Switch to using Subversion
2255 kes Remove src/pygtk-console/ from configure
2257 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2258 plus the entrypoints.
2259 kes Apply patch supplied that corrects debug print
2260 in canceling jobs for max run time. Supplied as
2261 part of bug #621, which was previously fixed.
2263 kes Test on job_canceled() and sd_msg_thread_done inside
2264 loop starting the message thread to avoid a race condition.
2266 kes Remove rl_catch_signal from console.c as it conflicted
2267 with the header definition. Fixes bug #765.
2268 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2270 kes Clarify some stored/acquire messages to indicate if the
2271 problem is with read or append.
2273 kes Fix memory leak with storage ids in cats/sql_get.c
2274 kes Terminate watchdog earlier to avoid reference to released
2275 memory -- reported by Jason Austin.
2276 kes Move closing the database from jobq.c to the director daemon
2277 termination routine. This fixes memory leaks for shadow jobs
2278 (i.e. migration jobs).
2279 kes Free up the unique jobid chain items in migrate.c. This fixes
2280 a memory leak problem.
2281 kes Convert some ugly looking for statements to use foreach_alist
2282 in findlib/find.c. This will facilitate converting the structures
2283 to use dlist (for large include/exclude lists).
2284 kes Fix a bug in the btree.c and btree.h routines, then rename them
2285 rblist and add them to be built in src/lib. Include some new
2286 methods written by Rudolf Cejka that make the code more readable
2287 (hides some of the ugly casting).
2288 kes Add set_next() and set_prev() methods which make the code much more
2289 readable. Also add a new dlistString class that facilitates storing
2290 strings in dlists. To be used in the large include/exclude lists.
2291 kes Make some trivial modifications to lib/tree.h that use rblist
2292 rather than dlist for storing the tree links. This was suggested
2293 by Rudolf Cejka. The result of this is that the restore tree now
2294 uses red-black binary trees rather than simple linked lists. This
2295 should give rather dramatic speed improvements for directories
2296 contining large numbers of directories/files (more than 10000).
2298 kes Fix maxruntime bug #621.
2300 ebl Implement the include JobID in spool file name project.
2301 kes Reorder projects file in order determined by Jan 2007 vote.
2302 kes Implement item #12 on project list -- quick release of FD by
2304 kes Fix open of SQLite3 db where user does not have write permission
2305 so that DIR does not crash. Fixes bug #761.
2307 kes Add back missing @ in Win32 Makefile.
2308 kes Change 'Device not configured to autolabel' from INFO
2310 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2311 which should restart an indefinite # of times.
2312 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2313 other DIR specifications.
2315 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2316 Fix path quoting in SQLite scripts.
2317 Fix problems with SHGetFolderPath.
2319 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2321 kes Fix Job restart on error bug that promotes an Inc to a Full
2322 backup. This should fix bug #755.
2323 kes Add qt-console and first cut of code.
2327 kes Fix Bacula->Documentation link on Win32 to point to index.html
2328 instead of bacula.html. Fixed bug #750.
2329 kes Return JobId in db_get_job_record() when JobId==0. This should
2331 kes Do not release source pointers when restarting a failed job.
2333 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2334 This *should* fix bug #747.
2335 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2338 kes Modify USTORE constructor to set an empty store_source string,
2339 and don't copy the store_source string in a cancel. Hopefully
2340 this will fix Arno's seg fault, bug #744.
2341 kes Add back code to disable conio in configure. Fixes bug #743.
2342 kes Correct the Options scanner in the FD to correctly handle
2343 SHA1 option, which was eating the next option. Reported by
2345 kes Add code to indicate when the SD is spooling, spool wait, and
2346 despooling as requested by Alan Brown.
2348 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob