1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
31 separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
36 kes When a migration job actually runs, re-check the Job record
37 and skip if the job is already migrated. This should
38 significantly reduce the problems with bug #1129.
40 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
41 turn off glibc checks that prevent getting good dumps.
42 kes Implement console 'wait mount' command. Doesn't yet work.
43 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
44 kes Break the do_swapping into do_unload, do_swapping, and
45 do_load. It is much more logical that way.
46 kes Implement a set_dcr_from_vol subroutine in acquire.c for
47 reading volumes. This allows the dcr to be refreshed after being
48 zapped when the wrong volume is mounted.
49 This should fix bug #1126 -- During multiple tape restore, bacula
50 does not ask for physical tape change, but rereads same tape
52 kes Apply patch submitted for bug #1107 with a small modification.
53 This fixes a bug where bcopy copied too many records.
54 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
56 kes Make the default bat restore Pool be Any. This fixes bug #1118.
58 kes Remove debug statement that crashes the SD at the end of
59 a tape during restore. Fixes bug #1125.
61 kes Implement Win32 bat changes made to Branch-2.4
63 kes Tweak separator command in console to start disabled and
64 allow defining no separator character. Also make code a
65 bit more fault tolerant.
66 kes Make btraceback write the traceback to the working directory
67 before attempting to mail it.
68 kes Add a RFC to Projects.
70 kes Attempt to implement a kludge to make Qt work with bat
72 kes Setup rstorage correctly. Virtual backups are working.
74 kes Move setting JobLevel and JobType into a method, which should
75 allow completing Virtual Backups.
76 kes Fix verify jobs to work again.
78 kes Virtual Backup tweaks -- it is close to working.
80 kes Ensure that SD tried to mount a volume not in an autochanger
81 at least once before asking for operator intervention.
82 kes Make SD aware of Virtual Backup jobs.
83 kes Add VirtualFull for bat.
84 kes Changes to get read storage correct for Virtual Backup.
86 kes Remove old code from label.c
87 kes Split display_display_info() out of write_bsr_file()
88 kes do_vbackup_init() working -- i.e. bootstrap file built.
89 kes Change Bacula trademark owner from John Walker to Kern Sibbald
90 kes First non-working cut of vbackup
91 kes Correct FD heartbeat code to use volatile variable accessed by
93 kes Zero thread id with memset if on Win32 in case it is a struct.
94 kes If cannot create JobMedia record, continue to try to write eof
95 and clean up in block.c
97 kes Add code to interface OpenSSL to new Win32 pthreads code which
98 used a structure for thread_t.
100 ebl tweak bat for win32 compilation
102 ebl Remove tokyo cabinet from the source
103 ebl Update configure/autoconf to support berkeley DB
104 ebl Add a sort to db_get_file_list() to improve bsr construction time.
106 kes Add a mtx-changer.conf file that is not overwritten during
107 an upgrade. It fully configures the mtx-changer script.
108 kes Clear in-use bit on vol when unused while swapping.
110 kes Remove sleep at end of ./bacula
111 kes Clear hash packet for hardlinked files correctly. This corrects
112 a long standing bug where hardlinked files selected individually
113 would occasionally not be restored.
115 kes Apply Eric's patch to ensure that autoprune does not return
116 a Volume not in the autochanger unless requested to do so.
117 kes Correct bat restore display of multiple drives. This fixes
119 kes Do find_a_volume() each time an unload is done. This
120 fixes the failure of maxvol2-test.
122 kes Add some SD debug code.
123 kes Do find_a_volume() each time an unload is done.
124 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
125 and adds --with-db-port to ./configure.
126 kes Use Qmsg() in job.c watchdog callback.
128 kes Release main control rwlock if ABORTing.
129 kes Make watchdog connect timeout queue messages rather than sending
130 directly to avoid lock conflicts with the real thread.
131 kes Add const char in dbd.c to avoid compiler warnings.
132 kes Fix python compiler string warning. Note, IMO the GNU C++
133 compiler guys have made a *very* bad change to their compiler.
134 They now force all strings to be 'const' unless you explicitly
135 cast them, which is extremely ugly and ruins nice code as well
136 as creates a lot of useless work.
138 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
139 mt. This fixes bug #1116.
140 kes Add const in python files to reduce compiler warnings.
141 This may have to be backed out because of later compiler
143 kes Fix failure of 2drive-concurrent-test. Always read label;
144 clear_unload() only after drive is defined in acquire_for_read().
146 kes Generally clean up the manual tape loading code. The main
147 conceptual change is that when a volume is marked to be unloaded,
148 its volume name is retained, and it is only marked as unloaded
149 when either the autoloader says it is unloaded or another tape
150 is read on that drive.
152 kes Add debug code and refactor subroutine in stored/mount.c
153 kes Fix format problem in bscan output reported in bug #1105.
154 ebl Fix get_next_volume_for_append logic with autochanger
155 - use pruned volumes if found
156 - don't reset the inchanger flag after getting a recycled volume
158 Fix recycle_oldest_purged_volume to take InChanger flag in account
160 ebl Add mmap/unmmap implementation for tokyodbm under win32
162 kes Make first step toward eliminating globals from config
163 scanning. Also should be a workaround for FORTIFY_SOURCE
164 GNU C bug -- fixes bug #1042.
166 kes Apply duplicate job tests to restarted jobs.
167 kes Copy more data when restarting a job so that run
168 overrides are kept. This should fix bug #1094.
170 kes More word alignment cleanup.
171 kes Fix bug where SD did not ask operator if the device could not
172 be opened. Reported by Eric.
174 kes Add dbuser to DIR conf file (replaces user).
175 kes Add --with-db-password to ./configure
176 kes Fix regress to handle db_password.
177 ebl Add new "status storage slots" that list autochanger
179 ebl Update vtape driver to compile only under Linux.
180 ebl Fix a bug when restoring with a wrong mediatype.
182 kes Eliminate ints from conf files and structures to avoid
183 word alignment problems
185 kes Fix bug reported by Scott Barninger where the bacula script
186 refers to scripts in the wrong directory. Needed to meet the
187 requirements of recent FHS location changes.
188 ebl Disable vtape for FreeBSD.
190 ebl Modify disk-changer to check if slot contains something before
193 ebl Fix vtape on win32 and debian.
194 ebl Fix autoselect patch (cause segfault).
196 ebl Fix autoselect option broken for a while. Fix #1089. Need some
197 work with StorageId to be able to use a particular drive in a
200 ebl Rename vtape to vtape.
201 ebl Update vtape driver.
203 ebl Modify vtape driver to avoid sparse file.
204 kes Add make clean of qt-source directory during ./configure
205 kes Store last block number written to tape in DEVICE and
206 use it for testing for correct last block on EOT.
208 Release Version 2.4.0:
212 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
213 This fixes bug #1095.
215 kes Add create_postgresql_database.sql to Win32 installer. Should
216 fix problem reported by Juilio Monteiro.
217 kes Get correct slot when auto unloading a device. This fixes bug
220 kes Fix multiple media restore.
221 kes Make DEVICE Slot private and access it via a method.
222 Allows better control over when it is set and cleared.
223 kes Fix possible seg fault if SQL error.
225 kes Add Martin's fixes to argument scanning for the estimate
226 command. This fixes bug #1093.
227 kes Add debug code to SD.
228 kes Fix renaming a Volume, which used the wrong Volume name.
230 kes If operator has rewind tape, print warning, release tape and
231 try once more. If tape is positioned somewhere, something went
232 wrong, so mark the tape in error and try once more. Previously
233 this error was fatal, now it produces an error message.
234 kes Ensure correct volume name displayed during restore
235 kes Ensure that Volume is mounted for restore.
237 kes Fix a few more Coverity reported problems.
239 kes Apply Allan Black's status dir job count patch.
240 ebl Add information about IMPORT/EXPORT slots in mtx-script.
241 kes Enhance a couple of SD debug messages.
242 kes Tweak unload flag setting and ensure it is set during swap.
244 ebl Fix #1091 about bad output in estimate command.
246 kes Modify autochanger locking to attempt to avoid race
248 kes Make sure device not busy before doing label command.
249 kes Display open() errors except when polling. Previously too
250 many were suppressed. This should fix bug #1070.
251 kes Fix Win32 reparse points. Bacula will not recurse into any
252 reparse point directory, including mount points, unless the
253 directory is explicitly mentioned at the top level (same as
254 with Unix). A file that is linked to another file will be
255 backed up -- much as Unix does for hardlinked files.
256 This fixes bug #1041.
258 kes Remove double quotes from ChangeLog and ReleaseNotes
259 kes Remove StorageId test when pruning and recycling (Eric's changes).
260 kes Remove old form of locking when getting volumes -- causes deadlock.
261 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
262 the name unique and to eliminate compile time error.
263 kes Add accurate.o to Win32 FD Makefile
265 kes Fix cats dll build on Win32 after db_update_job_end_record
266 calling sequence change.
267 ebl Switch to tokyo dbm instead of htable in accurate code
268 ebl Include tokyo dbm to bacula source tree
270 kes Fix buffer overruns detected by Coverity.
272 kes Tweak joblog display.
274 kes Implement --without-qwt
275 kes Fix layout of restore tree dialog
276 kes Add configure bat QWT libraries, so that bat can be built
277 with or without the QWT libaries.
279 ebl Add dummy tape driver for regression tests.
280 kes Make sure we unload the right slot when swapping.
282 kes Add debug times, reduce size of two-pool-changer test
284 ebl Tweak autoconf scripts for vtape
286 kes Improve SD reserve debug code.
287 kes Testing an improvement to free up volumes no longer in use.
289 kes Rework SD acquire for read to handle autochanger Volume
291 kes Implement regression that explicitly tests swapping a Volume
292 from one drive to another.
293 kes Enhance disk-changer to detect most error conditions.
294 kes Fix SD code so that it properly swaps a Volume between drives.
295 This fixes bug #1083.
297 kes Apply libdbi patch from Joao Freitas for regress and for
298 Bacula trunk. Regress now works with libdbi. Nice.
299 kes Apply .nobackup patch from bug #1077 submitted by
301 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
302 name into jobs cloned via the run directive.
304 kes Prevent a Volume that is being swapped from being freed from
305 the volume list. This will most likely fix, at least partially,
307 kes Fix strippath so that it does not get a buffer overrun and crash FD.
308 This fixes bug #1078.
309 kes Remove 50 millisec wait in SD that broke debugger.
310 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
311 that a job may run, counted from when the job was scheduled.
312 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
313 a job may block waiting for a resource, counted from when the job starts
314 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
315 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
316 that implements multiple commands per line in the console when using
317 readline. Modify the default to use a semicolon as the command separator.
319 ebl Fix SQL query in migration code.
320 ebl Make accurate mode with hash disk pass regression tests
322 ebl Implement first cut of accurate backup with hash disk.
324 kes Force unload of volume when wrong volume mounted in SD.
326 kes Fix bat seg fault at termination.
327 kes Add Bacula generated version to bat about box.
330 kes Experiment with allowing multiple read jobs.
331 kes Move final volume swapping code to DCR method and
332 call it from acquire_for_read().
333 kes When wrong volume is mounted during read, unload_autochanger.
335 kes Integrate the libdbi changes from Joao Henrique Freitas
337 kes Stop searching for Volumes in SD askdir if DIR returns the
338 same volume name twice in a row.
339 kes Close bat console windows first to eliminate error message
342 kes Tweak the swap Volume from one drive to another code so that
343 it now seems to work.
344 kes Resolve several problems with recycling that broke the new
345 code (these problems are in 2.2.9 as well).
346 kes Remove the volume lock when calling the sysop code.
347 kes Don't mark a reserved volume with no writers as unused otherwise
350 kes Rework class structures for VOLRES, DCR, and DEVICE to make
351 the method names a bit more logical, and for more logically
352 handling the responsibilities.
354 kes Remove redundant code in terminating the scheduler that just
355 causes a seg fault in many cases.
356 kes Cleanup releasing a volume and make it a DCR method.
357 kes Improve algorithm for detecting pre-reserved volume and
360 kes Tweak volume swapping code so it works.
361 kes Correct name overloading in mount.c
362 kes Replace released flag in VOLRES with reserved and add access
363 methods for the VOLRES class.
364 kes Prevent volume from being released while being swapped.
365 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
367 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
369 kes Refactor parts of stored/mount.c
371 ebl Add sanity checks for VolWriteTime and VolReadTime
372 ebl Take care of bad clock changes while computing VolWriteTime
373 and VolReadTime. This should fix or limit #1066
374 kes Correct error string numbers in dird/catreq.c
375 kes Restructure reserving, acquiring, and mounting volumes. Calls to
376 autochanger are deferred for mount.c -- simplifes the code.
378 kes Do not prune any running job. It just fails the job.
379 kes Lock the volumes when changing dev->reserved_device and marking
380 the volume unused otherwise the device can get reserved by
381 another job before the volume is released, thus blocking it.
383 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
384 kes Fix bug #1063, reuse of freed ptr in list nextvol.
385 kes Release regex compile buffer in filed/job.c
386 kes Add proper type of const char in sql_create.c
387 kes Turn off debug in daemon termination routines
388 kes Move free_volume_list() before devices are freed in stored.c
389 kes Fix reference to uninitalized stack variables in bregex.c.
390 This should correct bug #1067.
392 kes Fix possible seg fault in SD when freeing a volume entry.
394 kes Implement unload_dev() before swap device.
395 ebl Add statistics prunning with option and menu
396 kes Separate unload_dev() from unload_other_device() in autochanger.c
398 kes Apply patch from bug #1069 that corrects spurious error messages
399 when ACLs enabled on SGI but no ACL exists.
400 ebl Fix small segfault in bacula-sd when debug level is 500
401 kes Modify run_program() and run_program_full_output() to use
402 call by reference for the results string. This corrects a long
403 standing problem where the address of the string may be changed
404 in the subroutine but not in the calling program.
406 kes Re-enable code to remember last volume mounted on a non-tape
408 kes Add patch supplied in bug #1068 that fixes a SD crash when using
409 a Virtual autochanger.
410 kes Generate correct JobMedia records during spooling/despooling when
411 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
412 <tih@hamartun.priv.no> for excellent analysis and testing.
414 kes Tweak hash algorithm for htable using Martin Simmons idea
415 for doing a circular shift.
416 kes Remember what volume is in VTLs (previously turned off for
418 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
419 pointed out some problems in creating JobMedia records during
420 spooling with concurrent jobs. Fix the problem by updating the
421 start file position before despooling and generate a jobmedia
422 record at the end of despooling.
424 kes Fix handling of JobMedia records during spooling and when a
425 Volume is changed without actually writing data to the Volume.
427 kes Rework certain SD locking based on gdb tracebacks of deadlocks
428 sent by Eric. This code now uses only the volume_lock() rather
429 than the reservations lock when at EOM and acquiring a new
431 kes Ensure only one exit point in several subroutines.
433 kes Implement bsock code to permit locking. Use the new code in Verify
434 in the FD to prevent the heartbeat thread from disrupting the Verify
435 data sent to the Dir.
436 kes Modify SD locking to eliminate locking the reservations system from
437 outside the system. Use the volume lock when getting media data
438 and reserving a new volume at end of media.
439 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
440 when SD starts are not locked into place.
442 kes Fix error compiling runscript code on 64 bit machines.
443 kes Tweak Win32 mount point code.
444 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
445 cleared giving bad file estimate).
446 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
449 kes Keep Schedule run lists in order as suggested by
452 kes Implement autostart scripts for Debian.
453 ebl Implement upgrade catalog scripts.
455 ebl Apply jobstat patch for long term statistics. Have to implement
456 purge stats command and upgrade scripts.
457 kes Fix mtx-changer.in for broken Debian mt program.
459 kes Fix large number of JobMedia records reported by Eric Bollengier.
461 kes Apply doc fix from bug #1062.
462 kes Resolve crash and improper restore wx-console Win32 restore
463 GUI. Fixes bug #1065.
464 kes Update Win32 wxWidgets to latest version.
465 kes Attempt to do correct handling of Win32 mount points. Should
467 kes Fix Win32 FD backup/restore memory leak due to improper termination
468 of BackupRead/Write. This fixes bug# 1038.
470 ebl Reduce memory usage for accurate backup, working only with ctime
471 and mtime. (not all Lstat field)
472 About 40MB for my Linux system (400.000 files)
474 kes Add dcr->reserved_volume flag that allows us to release a volume
475 even if it is not vol->released. This allows maxvol2 to work when
476 Volumes expire and we are already writing to the device (i.e. a
477 volume is pulled out from under us by another job terminating after
478 we reserve the drive).
480 ebl Permit multiple command/console per runscript definition.
481 RunScript { command = /bin/true ; command = /bin/false ... }
482 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
483 (restart an application) just after the VSS snapshot on windows.
484 kes Don't zap dcr values during release_volume() as they might
485 have the next Volume to be mounted.
486 kes Fix AIX prototype.
488 kes Second cut of drive switching during backup.
491 kes Update Win32 version of wxWidgets to most recent version.
492 kes Tweak Copy job details.
493 kes Rework dir_find_next_appendable_volume to make a bit more effort
494 to find a suitable volume before giving up.
496 kes Make ask_sysop_to_create... to return if waken from wait.
497 This helps get out of blocked conditions.
498 kes Experimental implementation of switch_device in reservations.
499 kes Implement FD version to allow easier protocol changes.
500 kes Add Plugin Options string -- not yet passed to FD.
501 kes Implement PluginOptions ACL.
503 kes Attempt to correct problems with restores with autochangers and
504 use counts going negative
505 kes Rework SD status command and implement API for bat. Implements
506 header, runing waitreservation, devices, volumes, spooling,
507 and terminated status keywords.
508 .status storage=xxx <keyword>
509 kes Clarify TLS error message by adding double quotes around name.
510 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
511 kes Pass jcr to tls routines so debug messages can be handled better.
512 kes Rework jobq resource allocation code, and possibly fix a bug
513 that caused reference counts to get out of sync.
515 kes Rename fd/dir plugin to use Bacula standard underscore.
516 kes Plugin work -- bring dir up to fd level.
517 kes Start implementation of VTL code
518 kes Fix Win32 build after adding new cats subroutine.
520 kes First cut at Duplicate Job implementation.
522 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
523 kes Start PluginOptions string, and refactor a bit of ua_run.c
524 ebl Apply Allan patch that permit to reset recyclepool.
526 kes Test patch -- possible fix or improvement for bug #1053
527 kes Refactor FD and SD status commands to permit new API code in
528 SD, and to fix Win32 build.
529 kes Win32 build is now working.
531 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
532 some ideas in patch from Scott Bailey.
533 kes Begin implementation of duplicate Job control.
534 kes Fix some of Win32 build after recent additions.
535 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
536 which causes the FD to detect whether or not the OS has the
537 honor no dump bit (*BSD systems), and if so, to skip backing up
538 any file with this bit set. The feature is enabled by setting
539 'honor no dump flag = yes' in the Options section of a FileSet.
541 kes Correct po warning message with datarootdir
542 kes Implement more code in dird.c to put configuration parsing in
543 a class rather than use globals.
544 kes Restructure SD status command for implementation of bat API
547 kes Suppress incorrect 'Will not descend from x into y' messages.
548 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
549 daemon globals used by parser.
550 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
552 kes Fix free of plugin_list when none exists.
554 ebl Apply accurate project patch.
556 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
557 on non-mempool object)
558 kes First cut of converting FD .status to work with bat API.
560 .status client=XXX header
561 .status client=XXX running
562 .status client=XXX terminated
563 kes Implement first cut of Copy Job.
564 kes Implement Catalog in Pool resource. It overrides catalog specified
565 in the Client resource.
567 kes Apply patch (with some difficulties) from Joao Henrique Freitas
568 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
570 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
571 ftruncate() actually works. In the case of some (cheap) NAS devices,
572 it does not, and so recycling NAS Volumes does not work. The code
573 simply unlink()s the file, then recreates it. This fixes bug #1011.
575 kes First incomplete cut of big malloc blocks for htable.
576 kes Tweak plugin code.
578 kes Plugin debug code + tweak a couple bat dialog layouts
580 kes Fix creating first JobMedia record during Migration to include
581 proper index. This caused slow restores of migrated jobs.
582 kes Temp fix to plugin name file_index.
583 kes Bacula backed up and restored a MySQL database.
585 kes Implement plugin restore.
586 kes Implement parsing of db_driver to give db_type index.
588 kes First cut of plugin restore code.
589 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
590 and do not strip paths on symbolic links.
591 kes Set catalog backup database and user name from values specified on
592 the ./configure line.
593 ebl Fix #1031 about wrong pool source information in job report.
596 kes Remove a redundant jcr argument to find_files, match_files, and
598 kes Implement '.status dir header|scheduled|running|terminated' that
599 prints the requested status section. With the exception of the
600 header, the other reports have fields separated by tabs (\t).
602 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
603 a resource embedded run command to find a since time if no explicit
604 since time was supplied on the command line.
605 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
606 that updates the state file at job termination time in addition to
607 when the daemon terminates.
609 kes First version where a plugin did a backup.
610 bpipe-fd.so created a backup file, wrote a test
611 string to it, and Bacua could restore this fabricated file.
613 kes Implement DB Driver = string for the DBI driver.
614 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
615 kes First cut of code for loading Win32 plugin dlls. Implement
616 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
617 and implement a dlfcn.h file based on opengroup's definitions of
620 kes First cut plugin directives.
622 kes Apply patch from bug #1049 to prevent stripping the path on a
624 kes Attempt to fix bug #1047 where stripping a path corrupts the
625 heap. Waiting for feedback.
626 kes Correct the Mount message not to suggest labeling a new tape
627 when doing a restore. Submitted by email by John Stoffel.
628 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
629 FD by using casting. Reported in bug #1042.
631 kes A bit of crypto cleanup. More later.
633 Release Version 2.2.8
635 kes Apply patch from Martin to correct bug #1040, bscan sets existing
637 kes Fixed important spelling error in doc -- bug #1045.
639 ebl Fix bextract to be able to extract non-portable Win32 data to
641 kes Move initialization of read/write res lock earlier in the code.
642 This fixes the crash with a null conf file. This fixes bug
644 kes Redefine CURES in lib/parse_conf to be URES and move it all
645 into lib/parse_conf.c -- this responds to bug #1042, but does
646 not fix it. The fix is not to compile with FORTIFY_SOURCE.
647 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
648 the trunk SVN. I don't think this was reported as a bug.
650 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
652 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
654 kes Add DataDespooling and DataCommitting status (committing is
655 the last despooling).
656 kes Finish implementation of new reservations code noted below.
658 kes Fix bsnprintf for float point numbers. I broke recently when
659 parameterizing some variables. This fixes bug #1036.
660 kes Undo recent reservations changes ... will apply them later
661 when they work better.
663 ebl Fixes #1034 which cause mysql to hang the connection after 8h
664 ebl Change default statistics target of filename.name and path.path
665 fields for PostgreSQL. This speeds lookup by indexes. Thanks
667 kes A few more tweaks to new reservation code. Make sure to clear
668 vol released flag when retaking volume. When reading label and
669 label is bad mark volume unused. When recycling, mark volume
670 unused so it can be renamed.
672 kes Fix reserve_volume() so it doesn't release a volume in use
673 (i.e. a volume entry not marked released). This should be
674 the last part needed to fix bug #1018.
676 kes Move Heartbeat documentation from Job to Director resource.
677 This fixes bug #1033.
679 kes Fix existing switch drive SD code to call autochanger to release
680 any old volume. This must be done to keep the autochanger from
681 releasing subsequently newly reserved volumes in doing a close().
682 This should fix bug #1018.
683 kes Fail if attempting to get console input in batch mode. This
684 should help fail RunScript console commands that are incomplete.
685 kes First cut implementing switch_drive() in SD (not actually called).
687 kes Implement first cut running console commands in a RunScript.
689 ebl Fixes bug #1028 where 'Selection Type' option was not usable
691 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
694 Release Version 2.2.7
696 kes Add new free_tls() entry point so that Win32 builds.
697 kes Fix compile warning in src/lib/util.c
698 kes Fix entry point for edit_job_codes() so that Win32 builds.
699 kes Fix seg fault Frank Sweetser reports in regression testing
700 on his systems. The problem was that the original author of
701 bsnprintf.c did not take into account the side effects of
702 using ++x in the argument to a #define.
703 kes Make SD protocol backward compatible with version 2.2.x.
705 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
706 because Bacula no longer restores sockets.
707 ebl Always use ignorecase fileset option on win32 FD.
709 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
710 that implements double quoting include names in conf files,
711 and also allows piping input by having the first character
712 be a vertical bar (|).
713 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
714 that implement %f in RunScripts to pass the FileSet name.
715 kes Skip leading | when lex input comes from a pipe as suggested
716 by Michael Stapelberg <michael@stapelberg.de>.
718 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
719 Nerijus Baliunas <nerijus@users.sourceforge.net>
721 kes Implement Plugin Directory and plugin events.
723 kes Implement a security enhancement: TLS authentication but no
724 encryption. Enabled by setting 'TLS Authentication = yes'.
725 Note when this is on, TLS encryption is turned OFF!
727 kes This patch corrects a problem where the maximum concurrent storage
728 jobs counter gets out of sync during restore jobs causing jobs to
729 'wait on max Storage jobs'. This patch fixes bug #1009.
731 kes This patch fixes bcopy so that it produces correct Volumes.
733 kes This patch eliminates spurious output to the console during a VerifyVolume
734 job that contains encrypted data. It fixes bug #1024.
736 kes This patch prevents the 'status dir' command from trying to use a scratch
737 volume and possibly moving it from one pool to another. This patch fixes
740 kes Add new include to postgresql.c suggested by Marc Cousins so
741 that it compiles correctly with pgre version 8.3.
743 kes Fix --archivedir addition to configure. Replace it with
744 --with-archivedir in configure.in This fixes the regression
746 kes This patch fixes bug #1012 where the job is canceled because
747 of Max Run Time exceeded when the job has not yet started.
749 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
750 one 'part' to write. Instead of each part being stored on disk,
751 written to DVD, then deleted from disk, all parts are written to disk,
752 and only the last is written and deleted from disk.
753 kes This patch fixes the status command to include the formating string for
754 JS_AttrInsterting. It fixes bug #1021.
755 kes This patch should fix the Mac OS X build problem on the latest
756 Darwin, where sys/types.h was not included correctly (apparently
757 due to a change in the Mac headers). The solution was to explicitly
758 ensure that it is defined for the ./configure.
759 This patch also has a rebuild of configure that includes the Debian
760 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
761 kes This patch should ensure that queued messages to the console are
762 displayed as soon as possible. It should fix bug 1007, but has been
763 reported not to work.
765 kes This patch fixes the infinite loop when trying to increase the
766 maximum number of volumes in a Pool during the add command.
767 This patch fixes bug #1008.
769 Release Version 2.2.6
771 db Remove extra data on estimate command in joblist for bat.
773 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
774 really change anything, but is the beginning of doing it *right*.
775 To do it completely right the LastWritten date must be passed to
776 the SD, but it is not yet done.
777 kes Minor tweaks to some bat restore SQL.
778 kes This patch fixes bug #1003 where putting the message output from
779 a Verify job into the catalog results in a recursive loop. The problem
780 seems to show up only with postgresql (to be verified).
781 kes Correct %x to %p in postgresql debug statement.
783 kes Fix bug #942 where lots of emails where generated when the heartbeat
784 interval was low and Bacula wanted a different tape from the one in
787 ebl Add new SD despooling attributes and Dir inserting attributes
788 job status codes in the catalog (Status table).
790 ebl Use qmake-qt4 instead of qmake when available (debian system).
792 kes Add a security warning to src/cats/make_catalog_backup.in indicating
793 that passing the password via the command line (arg 3) is insecure.
794 This responds to bug #990 (it doesn't fix it).
796 kes Set default debug_level to zero. This corrects bugs #991 and #993.
797 kes Fix a crash in bat when it cannot connect to the Director for example
798 if the Director is not running.
799 kes Remove redundant INDEX (JobId) from File table in the trunk.
801 kes Make explicit exception to GPL in LICENSE to permit linking
802 the Win32 FD with Microsoft VSS code.
803 kes Apply the Solaris package patch from
804 Masopust, Christian <christian.masopust@siemens.com>
805 kes Apply the patch to optionally add a timestamp in the debug output
806 submitted by Mariusz Czulada <manieq@wp.eu>.
808 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
809 backend (sql_strerror). Fixes bug #989
811 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
812 It applied with no problems.
813 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
815 kes Redirect stderror to stdin on mt status command in mtx-changer.in
816 since the status is returned on stderr on Solaris.
817 kes Activate Close button on tray-monitor window. This fixes
819 kes Check for NULL item in parse_conf.c before calling it. In the
820 case of Device, there is no item and this caused a seg fault when
821 Device appears in the conf file.
822 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
823 avoids pulling in config.h multiple times in some new code.
825 kes Fix spurious warning message printed when creating a volume with
826 a LabelFormat. This fixes bug #976.
828 Release Version 2.2.5
830 kes Add JobId in place of Job name in all the Jmsg() output.
831 kes Correct the APP_DESC for the Win32 storage service (remove an e).
833 kes Make maxvol-test and new more strict maxvol2-test work.
834 kes Print JobId in all Jmsg() job output.
836 kes Add new SD despooling attributes and Dir inserting attributes
837 job status codes. This fixes bug 961.
838 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
840 kes Fix doc issue. This fixes bug #963.
841 kes Fix listing performance problems in bat. Pointed out by
843 kes Remove old debug code.
844 kes Fix bat code that tests for Win32. This should fix bug #968
845 kes Query 5 list wrong Vol after migration. This fixes bug #960
847 ebl Fix #969 where user can't change Replace option in restore menu.
849 kes Save jcr in thread specific data (tsd) for each thread.
850 kes Make Dmsg() print JobId as -%u.
851 kes Make Jmsg, Emsg, and others automatically pickup the jobid
852 for the thread if it exists.
853 kes Remove old reservation debug jid code.
854 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
855 ebl Add an option that permit to specify spool size in job
856 definition. (Applying patches/testing/spoolsize_per_job.patch).
857 You must upgrade SD and DIR at the same time.
858 dvl Add new configuration item --archivedir
859 dvl Adjust regression tests to use tmp not /tmp. This will allow
860 multiple concurrent runs of the regression tests.
862 kes Fix race condition that drops final block written to volume.
863 This happens in rare cases with multiple simultaneous jobs
864 when the Volume fills. This fixes bug #964. May be related
865 to bug #935 and possibly #903.
866 kes Eliminate more strerror() and replace with bstrerror().
867 kes Remove BSD getopt and replace with unrestricted IBM version.
868 kes Fix Win32 build for changed calling sequences.
869 kes More tweaks to the mount volume routines to get everything
870 right. Changed variable name from find to have_vol, which is
871 much easier to understand.
872 kes Enhance btimer debug code.
874 kes Fix FD->SD authorization failure, which was due to spurious
875 wakeups from a pthread_cond_timedwait(). Simply check the
876 predicate before continuing. This fixes bug #953.
877 kes Add const char where needed (more to do). Remove temp debug code.
879 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
880 kes Don't overwrite error message in check_tables_version.
882 kes Unlock batch insert tables with same calls used elsewhere.
883 kes Allow starting 59 jobs a second.
884 kes Make SD session key more random.
885 kes Add retry for SQLite opening db if it fails. Probably helps
887 kes Suppress extra error messages during batch insert failure.
889 kes Add jcr to timer packets so if killed message can be sent to job.
890 kes Add JobId to all Dmsg() output.
891 kes Put some FD auth code on dbglvl rather than fixed.
892 kes Return insert attributes error message in db msg buffer to avoid
893 false error messages. Helps fix bug #966.
894 kes Separate batch init error messages. Probably helps fix bug #966.
895 kes Make SD code that contructs attribute insert check string lengths
897 kes If Dir gets an error during inserting attributes, cancel SD.
898 This reduces unnecessary error messages.
900 kes Correct search boolean for getting Volume info
901 ebl Cleanup batch insert code. Probably fixes bug #965.
902 kes Back out one small change to the reservation system (reserving a volume).
903 kes Rework how a Volume is mounted. It is now much more intelligent and
904 will always attempt to use any mounted volume if possible and reduces
905 calls to the Director asking about volumes.
907 kes Turn off some code when batch insert not enabled.
908 kes Edit FD name in connect error messages.
909 kes Rework the reservation system to take into account that the Director
910 might give us a Volume that is different from the current one being
911 used, and to ensure that we don't exceed Maximum Volume Jobs.
912 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
913 fatal error with multiple jobs running'
914 kes Add more debug code in reservation system.
915 kes Implement maxvol-test to check bug #947.
917 kes Add code to handle tray monitor separated from Win32 FD.
918 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
920 kes Add missed return in fixing verify bug -- trunk only.
921 ebl Fix a command parser issue causing a director segfault.
922 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
924 kes Increase the max block size to 4MB fixes bug #957.
925 kes ERABT if user sets min block size > max block size. Fixes bug #956.
926 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
927 is not properly mounted (recognized) during a poll.
928 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
929 Job that has differences reports Verify OK.
930 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
932 ebl Add an option to operate on all pools with update vol parameters.
933 This complete the project 20. Patch from Nigel Stepp.
934 ebl Add history support to bconsole when using readline.
935 Using Ctrl-D to exit doesn't update .bconsole_history
936 kes Modify new volume algorithm to use max MediaId for generating next
937 volume number rather than the count of Volumes. This should essentially
938 eliminate the failure rate if some volumes were deleted. Bug #921.
939 kes Begin implemention of Optimize Job Scheduling.
940 kes Implement restore callback that Dirk and I agreed on for bat
941 restore. This fixes bug #928. Restore of backup of zero files fails.
942 kes Fix SQL Catalog logging which broke with new db_escape_string
945 Release Version 2.2.4
947 kes Fix bacula_cats.def for new db_escape_string().
948 kes Increase size of name string when FD making connection to SD.
949 May fix bug #953. FD->SD connection failure.
951 kes Add code to help Dan debug 2drive-incremental-2disk test.
952 kes Add code to try to fix bug #908.
953 kes Add waits to multiple exit detection code to try to force pid
954 file to always be deleted.
955 kes Restore good dev.tar.gz to rescue set appropriate binary property.
957 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
958 trying to switch drives by checking for blocking before unblocking.
960 kes Cancel storage daemon in all cases where FD reports error. This
961 should fix virtually all cases of bug #920.
962 kes Fix db_escape_string() for MySQL which did not compile.
964 kes Fix error message that was clobbered when Dir tells SD it does not
965 have write permission on Volume. This should fix a minor point
966 in bug #942, but not the main problem.
967 kes Add code to cancel job in SD if FD connection fails. This should
969 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
970 dvl Pass jcr and db into db_escape_string() to enable better escaping
972 kes Fix migration code to get correct Volume name with multiple volumes
973 by skipping |. Fixes bug #936.
974 kes Implement patch supplied by Landon to fix bug #944 where using
975 TLS with bconsole uses 99+% of the CPU.
976 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
978 kes Move patches into patches directory.
980 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
983 ebl Using 'm' in bconsole will show messages like before,
984 and not memory usage.
985 kes Fix bug #935, and probably also bug #903 where files were not
986 restored. MediaId was not properly set in JobMedia record after
989 kes Suppress chown and chmod error messages if the FD is not running
992 kes Apply Martin Simmons' patch that should turn off the new API usage
993 when batch insert is turned off allowing building on older
995 kes Add ./configure search in qwt-qt4 for qwt package
997 kes Bacula is now free of 3rd party GPL copyrighted code!
999 kes Add guid_to_name.c/h which replace idcache.
1000 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1002 ebl Detect if new PosgreSQL batch insert API is present.
1003 kes Correct incorrect mempool call causing Director crash. Occurs on
1004 systems without va_copy().
1005 sb Update spec files for 2.2.1 release
1007 kes Fix memory pool call in ua_output.c. bug #934.
1008 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1009 Add test program to fnmatch.c
1011 kes Integrate patch to README.vc8 from
1012 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1013 edit it to get it into Unix patch format.
1014 kes Implement mkpath.c to replace old FSF makepath.c
1016 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1018 Release Version 2.2.1
1020 kes Update POTFILES.in
1021 kes Cleanup a few underquoted AC_DEFUNs in configure
1022 kes Apply patch from Martin Simmons that adds a test for va_copy to
1025 kes Fix bug #921 by increasing the number of tries to create a new volume
1027 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1028 can be called multiple times. Implement a version for machines
1029 without va_copy() that gets a big buffer.
1031 kes Integrate more portable zone offset code into bsmtp.c
1032 Submitted by Attila Fülöp.
1034 kes Fix bad SD->FD return status reported by
1035 (James Harper) <james.harper@bendigoit.com.au>
1036 ebl Fix a bug in read_close_session which return random status
1037 thanks to James Harper
1039 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1040 and directory names during restore of single file/directories.
1041 kes Add sanity checks to .sql command when string is empty. Hopefully
1042 that will resolve Dirks Director crash.
1044 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1045 in the bsmtp chat subroutine when debug is >= 10.
1047 kes Fix Director crash when running bat SQL queries.
1048 kes Add David's notes on Item 8: Copy pools.
1050 kes Rework projects file to be current and ready for a vote.
1051 kes Enhance lex scanner error message.
1053 kes Tweak LICENSE file to mention BSD code.
1054 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1055 if specified on the ./configure.
1056 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1057 This class is intended to allow us to open a second bsock to the
1058 Director while in the restore subdialog.
1060 kes Fix configure to create bat Makefile before creating dependencies.
1061 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1062 kes Add a tooltip to the tray monitor.
1063 dvl Set the Director's PID file before dropping privs. This fixes
1066 kes Update AUTHORs file
1067 kes Increase the default max concurrent jobs to 20 in FD and SD to
1068 correspond with the default .conf files.
1069 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1070 some different, of the same file created by RN when porting the
1072 kes Rearrange some of the Win32 directories and the placement of the files
1074 kes Set DEVELOPER flag in version.h
1076 ========================================================================
1077 Release Version 2.2.0
1079 kes Apply a second doc patch from Marc.
1080 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1081 improves the tips section that discusses how to setup multiple
1084 kes Update bat README file.
1085 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1086 corrects a typo in the Recycle status check in db_find_next_volume().
1087 This will probably fix a number of annoying problems with multiple
1089 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1090 bnet calls -- no functionality change.
1092 kes Modify the Verify output to specify if files are missing on
1093 the Volume(s) or disk. Fixes confusion in bug #916.
1094 kes When more than one Volume is read in a migration job, the last
1095 Volume bytes reported are from the last read volume rather than
1096 the last written volume. Fixed. This fixes bug #910.
1097 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1098 It previously printed New Recyle flag is: no. This fixes bug
1101 kes Correct seg fault when switching tape drives during restore.
1102 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1103 be used until after 2.2.0 release.
1105 kes Remove fnmatch() in SD that permitted wild card specifications.
1106 This fixes bug #914.
1108 kes Fix %g in filename returned by SQL for browse tree reported by
1110 kes Fix configure so that it puts config.out in the cwd rather than
1112 kes Attempt to fix the locking problem reported by Eric in bug #906.
1113 kes Make berrno class to leave errno unchanged after constructor call.
1114 kes Make bnet_server use the heap rather than the stack to allocate
1115 its socket fd pointers to avoid a crash at termination. Problem
1116 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1118 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1119 and putting it in depkgs-qt along with Qt4.3.
1121 kes Rework code in acquire.c that switches drives for reading when
1122 the Media Type does not match. This should fix bug #906
1124 ebl Fix a director segfault during job setup #907
1125 kes Correct seg fault in postgresql when first operation returns no
1126 rows. Fixes Dirks File browser problem seg fault with bat.
1128 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1129 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1132 kes Implement PopUp YES/NO dialog for bat.
1134 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1136 kes Correct RunScript to terminate job in FD on failure.
1137 kes Change abort_on_error and AbortJobOnError to fail_on_error
1138 and FailJobOnError in RunScripts.
1139 kes Minor tweaks of code formating in RunScripts, principally to
1140 avoid depassing 80 columns.
1142 kes Eliminate one #ifdef Win32 in bsmtp
1143 kes Implement grow tool to grow a file for testing very large databases.
1144 kes Add big-vol-test to test Bacula seeking with > 5GB.
1147 kes Modify find_next_volume() to return all values in Media record.
1148 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1152 kes Update Release notes
1154 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1155 Warning, in previous beta version, all media get from scratch keep their
1158 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1159 This should fix bug #842. Made a note to look at removing the temp
1160 files at the end of the install.
1161 kes Add ability to mount and unmount a file device providing it is
1162 marked as being removable and has the appropriate mount and unmount
1163 commands defined in the Device resource. This fixes bug #830.
1164 kes When applying a storage override, release all previous storage
1165 definitions rather than just prepending the new storage.
1166 This should prevent a good deal of confusion.
1168 kes Implement ./configure search for qwt libraries.
1170 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1171 Win32 FD. This should fix bug #893.
1172 kes Remove an unnecessary beep in Win32 init code.
1173 kes Update copyright dates in Win32 executable about boxes.
1174 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1175 code with a BSD getopt.c and getopt.h.
1176 kes Remove sched.h from the Win32 compat directory -- not used.
1177 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1178 need to shut it down, do it through the services panel or the command
1180 kes Remove some inappropriate Bacula FSFE copyrights.
1181 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1182 kes Fix regress config non-portable test as pointed out by
1183 Florian Heigl <florian.heigl@gmail.com>
1184 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1185 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1187 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1188 Reported by Frank Sweetser.
1192 kes Fix client-only build.
1193 kes Integrate client-only fixes for bsys (initgroups) and conio from
1194 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1195 kes Make arguments to get_scratch_volume() in same order as other
1197 kes Rework the prune_volumes() subroutine so that after purging and
1198 no volume found in desired pool, it will check for a scratch
1199 volume. This prevents recycling the whole scratch pool.
1200 kes Add code to status storage to print boffset_t (largefile support).
1202 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1203 kes You now need a --with-qwt=<dir> to be able to build bat.
1204 kes Update src/win32/cats/bacula_cats.def to include the new
1205 db_get_query_dbids() call on Win32.
1207 kes Correct a problem when selecting a scratch volume and moving
1208 it to another pool that lost some columns.
1209 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1210 kes Enhance Autochanger error messages to include Volume and device name.
1211 kes Rework prune_volumes() code to take account of InChanger flag,
1212 and to handle recycling volumes going to the Scratch pool and
1213 current pool because the RecyclePool directive.
1214 kes Implement a better and more efficient db_get_query_dbids() to
1215 handle creating and passing back a list of DBIds.
1219 kes Start work on new more efficient DBId subroutine. First use
1220 will be for recycling volume to Scratch inchanger.
1221 kes Increase number of JobIds in pruning from 1000 to 10000.
1222 This to be replaced by above routine.
1223 kes Begin implementation of building Qt4 on Win32.
1224 kes Correct typo in fix I added for bad TLS shutdown.
1225 kes Pull 2.0.3 patches into patches directory.
1226 kes Update Release notes. Include qt-console in line count.
1227 kes Update Projects file.
1229 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1230 bug in migration code where a job that spanned two volumes
1233 kes Implement new BST_DESPOOLING blocked state. Change from locking
1234 during despooling in SD to blocking. This means that other threads
1235 can work with the device structure, in particular the reservations
1236 system while despooling.
1238 kes Fix return in reservation message queue that missed clearing
1239 the jcr lock (implemented 26Jun07 below).
1240 kes Rename a number of dev methods to make locking function names
1242 kes Document locking in lock.c. Move lock structures to new file
1245 kes Move reservations message lock to lock jcr only this
1247 kes Move main SD locking code into lock.c (new file).
1248 kes Update Win32 build to include lock.c
1252 kes Dirk committed the qwt library code for drawing graphs in bat.
1253 kes Tweak install of qwt so that it is integrated with ./configure.
1255 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1256 out by Eric (my typo).
1257 ebl Fix configure.in to get batch mode enable
1258 kes Return correct string from authenticate.cpp in bat when connecting
1260 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1261 spurious line drops when using TLS.
1262 kes Do not file reparse points when restoring a file that already
1265 kes Implement Windows reparse points -- similar to directories, but
1266 we do not descend into it. This is a first cut. They seem to
1267 be backed up, but restore is not yet tested.
1268 kes Remove restore_blocking in tls code when shutting a socket to leave
1269 it in blocking mode. Hopefully this will fix the encryption bug
1270 reported by Frank Sweetser.
1271 kes When opening a file for backup, tell the OS that we are going to
1272 read it sequentially -- optimization.
1273 kes Change variable names in authenticate_director() to not conflict
1274 with member names in bat. Caused great confusion with compiler,
1277 kes Queue openssl error messages in case of comm problem.
1278 kes Do shutdown() call if socket terminated.
1279 kes Remove some duplicated code in tls.c
1280 kes Move more of the bsock member variables into private and access
1282 kes Add Frank Sweetser's tls-test to the regression suite.
1284 kes Add Swedish sv.po file
1286 kes Don't print clock skew message in FD if less than 3 seconds diff.
1287 kes Add a bit of VSS info to status client.
1288 kes Implement a first cut of Vista VSS, using Win2003 code.
1290 Release: 2.1.20 beta
1292 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1293 loaded tape but uses first drive).
1294 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1295 This was indeed a Win32 issue.
1297 kes Simplify search of autochanger for in-use Volume.
1298 kes Fix exit condition of check for in-use volume. kes Remove
1299 inappropriate my_postgresql_free_result() in db_close()
1301 kes Fix bad return in FD when encryption signature not found.
1302 Probably caused a crash.
1303 kes Inhibit missing encryption signature error messages for
1304 file types where no signature computed.
1305 kes Correct inverted check on autochanger in reservation system.
1306 kes Tweak debug code in autochanger reservation.
1308 kes Add some additional locking in the cats directory in subroutines
1309 that modify packet variables called from batch insert.
1310 kes Rework how dcrs are allocated. new_dcr() can now be called
1311 with an existing pointer, and it will simply clean it up.
1312 This allows the reservation system to test various different
1313 devices, and will permit easy device changes.
1314 kes A bunch of changes all over to handle new new_dcr() calling
1316 kes Work more on the Volume management in the SD. Remember Volumes
1317 for tape drives and for autochangers (even virtual disk changers).
1318 kes When looking at the Volume list to reserve a drive, handle
1319 autochanger names correctly by interating through the changer
1320 devices. Also call the Director to see if a Volume is suitable
1321 for the current job.
1322 kes Fix some bugs in bscan. Make sure all media records are written.
1323 Make sure that valid JobMedia records are written for disk files.
1324 Previously they were completely wrong.
1325 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1326 that the URLs don't change and so that the developers will all
1327 work off the same copy. Rebuild from scrach.
1328 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1330 Release: 2.1.18 beta
1332 kes Fix seg fault in FD from incorrect digest size.
1333 kes Fix argument to non-OpenSSL crypto.c subroutine.
1335 Release: 2.1.16 beta
1337 kes Remove a few malloc()s from the encryption code.
1338 kes Use the class calls to bsock in filed/backup.c and restore.c in
1339 place of the old bnet_xxx code.
1340 kes Implement code that does an on the fly calculation of the
1341 signing digest during restore of encrypted files. It makes
1342 a best guess at the algorithm, and if it is not correct, will
1343 then revert to the old code which reads the file after it is
1345 kes Implement at least one missing crypto stream in stream_to_ascii()
1346 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1347 #877 where a reload with bad syntax causes Dir to exit.
1349 Cut: 2.1.14 beta (not released)
1351 kes Do not free a volume on a tape drive until another volume is
1352 mounted and read, or the autochanger unloads the volume.
1353 This should help the SD re-use volumes that are already mounted,
1354 and should fix bug #886.
1355 kes Apply patch from user brettedgar that allows gnome2-console include
1356 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1357 kes Apply patch from Lucien Weller that fixes day of week calculation
1358 because of DST flag problem. Fixes bug #887.
1360 kes Move find_next_appendable_volume() to after acquiring a valid device
1361 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1363 kes Unable to reproduce bug 872. However added additional testing for
1365 kes Bug #874 resolved by documenting SQLite limitations.
1366 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1367 kes Bug #881 resolved by removing typo in mtx-changer script.
1368 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1369 approval. Added a link to the wiki on the web page, and implemented
1370 a backup from http://paramount.ind.wpi.edu
1372 kes Fix update allfrompool to pass pool name.
1374 kes Convert to pure GPL v2 license.
1375 kes Fix sscanf problems reported by Peter Buschman that caused
1376 a bus error on Solaris.
1377 kes Rework (simplify) the select prompt in bat.
1378 kes Move get_jobid_from_tid() into lib and create a
1380 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1381 should definitely fix the problem of lost error messages in the
1383 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1384 kes Eliminate tcpd.h from the project. Enclose the #include from the
1385 library with extern C ...
1386 kes Add print of signal name when a signal is trapped.
1388 Release: 2.1.12 beta
1390 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1392 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1393 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1394 makes SQLit3 run 30 times faster, though a bit less safe.
1395 kes Implement --with-batch-insert in configure and detection of thread
1396 safe libraries. It is on by default, but turned off if no thread
1397 safe library (e.g. SQLite 2) is available.
1399 kes Fix Bacula PostgreSQL buffer overruns.
1400 kes Do better checking for NULL results returned from PostgreSQL;
1401 implement retry for failed queries; clear results buffer after
1402 failed query. Hopefully this will correct the PostgreSQL failures.
1404 kes Implement algorithm to handle only one appendable volume with
1405 Prefer Mounted Volumes = no.
1406 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1407 returned from a query.
1408 kes Make volume lock recursive.
1409 kes Implement an additional volume reservation algorithm that
1410 starts by considering all reserved volumes then uses the
1411 old brute force algorithm of searching the resources to
1412 find a suitable device.
1413 kes Add new reservations debug code and refine the old code.
1414 kes Update the win32/dll/bacula.defs file.
1416 kes Tweak reservations algorithm to permit a few more cases, i.e.
1417 volume reserved, but on different drive, ...
1418 kes Enhance SD status to include Pool and Media Type for drive in a
1419 more readable format (a bit longer).
1420 kes Fix PostgreSQL double free.
1422 kes Minor refactoring of restore decryption code.
1423 kes Add code to smartall.c to detect double free of a buffer.
1425 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1426 so that bsmtp will create a correct email address (mailbox only).
1427 kes Modify 'memory' command so that the buffers are listed as 'In use'
1428 to avoid confusion with Orphaned buffers.
1429 kes I reworked the OpenSSL include/lib flags to be handled in
1430 the standard Bacula way, which should fix bug #863 concerning
1431 non-standard OpenSSL libraries.
1433 kes Implement Help Browser window for bat.
1434 kes Fix reload bug that reset StorageId to zero.
1436 kes Fix TLS #ifdefing when TLS turned off.
1437 kes Ensure that when labelling a tape with Slot=0 that InChanger
1439 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1441 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1442 add DISTINCT (required by PostgreSQL).
1443 kes Implement BSOCK authenticate_director() method. Eventually will
1444 authenicate all daemons.
1445 kes Move several more functions into the BSOCK class.
1447 kes Add code to tell the OS that we no longer need a cached
1448 file that we were reading. In findlib/bfile.c. Also,
1449 only cache files that we are reading. Thanks to
1450 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1451 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1452 kes Implement script to automatically generate cats and dll .def
1453 files for Win32 dll.
1454 kes Update README.mingw32 to include new .def file generation.
1455 kes Correct typo in UTF-8 error message as reported by:
1456 jhernandez <julianhernandez@gmail.com>
1457 kes Add additional sm_check() code on debug level 1.
1458 kes Set default debug level to 1.
1459 kes Trap SIGABRT in attempt to get traceback.
1461 kes Reduce bat connect timeout from 30 to 15 seconds.
1462 kes More restructuring and implementing BSOCK class in place of
1464 kes Remove a few unnecessary malloc() tests in crypto code.
1465 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1466 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1467 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1469 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1471 kes Fix Verify InitCatalog. The attributes were not pointing to the
1472 correct saved location.
1473 kes Implement message callback so that GUI is sure to get all
1474 daemon messages. Currently displayed in a dialog in bat.
1475 kes Ignore SIGUSR2 (Bacula timer) in bat.
1476 kes Apply regress patch from bug #859 to allow regress to work
1477 with Solaris compiler.
1479 kes Begin adding TLS support to bat.
1480 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1481 clean up lex.c and make it more readable.
1483 kes Move more bnet functions into the BSOCK class.
1484 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1485 kes Complete change of berrno strerror() method to bstrerror()
1487 Release: 2.1.10 beta
1489 kes Cleanup incorrect email addresses in bsmtp.
1490 kes Make bat display initial messages rather than discard them.
1492 kes First cut of adding .mod to the run command.
1493 kes Implement auto display of messages in bat.
1494 kes Enhanced preferences to allow all Bacula output to be
1497 kes Try to make bsmtp date routines more generic.
1498 kes Fixed bug #856 autochanger documentation.
1499 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1500 kes Add new cats entry point so Win32 builds.
1502 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1504 kes Do better checking for the MySQL 64 bit libraries looking for both
1505 .a and .so libraries.
1506 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1507 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1508 kes Require the thread safe version of MySQL during configure. Thanks
1509 to Andre Noll for pointing this out.
1510 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1511 continuing in migration code.
1512 kes Apply implementation of tray-monitor font derived from gnome-console
1513 submitted by Andreas Piesk <a.piesk@gmx.net>
1515 kes Eliminate important memory loss in SQLite
1516 kes Fixed the batch insert MySQL thread specific data that was not
1517 being freed. See cats/mysql.c:db_thread_cleanup().
1518 kes Fix restore before command.
1519 kes Convert old hdr.name to name() in a few places.
1520 kes Implement update jobid command.
1521 kes Return all time_t dates in db_get_job_record()
1522 kes Stop watchdog in SD earlier.
1523 kes Put Pool just after Storage in please mount message.
1524 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1527 kes Update the po files.
1528 kes Fix Verify InitCatalog by making it cache attributes.
1530 kes Change name bacula-bat to bat for man 1 page to correspond to
1532 kes Check for client and store NULL pointers in status command. This
1534 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1535 kes Fix sign extended editing of %p.
1536 kes Clean out a little old #ifdefing in cats/mysql.c
1538 kes If time diff between DIR and FD is more than 600 seconds convert
1539 INFO message to WARNING.
1540 kes Implement heap size display in status for all daemons.
1541 kes Attempt to fix MySQL db open memory loss (not successfull).
1542 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1543 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1544 Query. This looks like a MySQL but but by doing extra releases,
1545 the memory goes away. This should fix bug #847.
1547 kes When backup fails, cancel SD before waiting for sd termination.
1548 kes If SD is waiting for FD to connect during cancel, wake up the
1550 kes Fix fsf code so that errno is correctly reported.
1551 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1553 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1554 so that Bacula doesn't later stumble into a seg fault.
1555 kes Use the term Restore Client in the restore Job report.
1556 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1557 the original job's FileSetId.
1558 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1559 spooling in migration jobs. Not yet tested.
1560 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1561 reading conf file from a pipe. However, do it with open_bpipe()
1562 rather than popen. Not yet tested.
1564 kes Fix an ugly bug where the VolCatBytes were getting updated
1566 kes Implement bconsole memory command that prints current memory
1567 usage, plus smartalloc dump.
1568 kes Clarify some error messages in backup, admin, and migrate.
1569 kes Shrink label dialog to smaller size.
1570 kes Invert Cancel OK buttons on restore to be OK Cancel.
1571 kes More strerror() to bstrerror() conversions.
1573 kes Start implementing bstrerror() in place of strerror().
1574 kes Stripping path -- seems to work.
1576 kes Prevent door and port files from being restored (mostly
1578 kes Free an unreleased buffer in compat code.
1579 kes Change console Job name from *Console* to -Console- to eliminate
1580 Win32 filename problems. Put Win32 path separator when creating
1581 Console file. This fixes bug #846.
1582 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1584 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1586 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1587 to force Win32 error message.
1589 kes First cut strip path. The data should be passed to the FD,
1590 but nothing is done with it yet.
1591 kes Enhance the digest and signature routines in the crypto
1592 library to accept a JCR and to use it to print error messages
1593 so that they will go in the Job report rather than the daemon's
1595 kes Simplify some of the verify signature code.
1596 kes Simplify a few of the alternative returns in the signature
1599 ebl Use only POSIX regex instead of GNU regex in breg.c for
1600 File relocation. It fix broken freebsd compilation.
1601 kes Convert all other Dir files to use new ua class message
1603 kes Tentative fix for missing digest signature in bug 807.
1604 kes Correct handle problem in new win32_ftruncate routine.
1605 kes Convert ua_purge.c and ua_update.c to use new ua class
1606 message routines for bat.
1608 kes Correct incorrect installation of LICENSE in Win32 installer.
1609 kes Display LICENSE at the beginning of the Win32 install.
1610 kes Attempt to correct the need for the png files to be installed
1612 kes Reapply my bat.conf install script in qt-console. I think I
1613 editted bat.pro instead of bat.pro.in and it was lost.
1614 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1615 the /var/lock/subsys for subsysdir. Also corrects typos in the
1618 kes First cut update job.
1619 kes Correct configure to include qmake of src/qt-console directory.
1621 kes Make restore job yes/mod/no print in one command so GUI works.
1622 kes First cut implementing backup and restore client.
1623 kes Correct editing in Verify output that caused a seg fault.
1625 kes Insure that bat.conf is not overwritten during installation.
1626 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1627 while I was implementing migration in March 2006 !
1629 ebl Cleanup file relocation, using char *RegexWhere instead of
1630 char *where + bool where_use_regexp
1631 kes Update some manpages and add bat manpage.
1632 kes Make a first cut at converting bacula.spec.in for bwx-console
1634 kes Apply patch from John Goerzen to add hostname as fourth argument
1635 to make_catalog_backup script.
1636 kes Fix typos I introduced into bsmtp.c
1637 kes Make pm_strxxx() routines handle input of NULL pointer. This
1638 is to protect from NULL pointers returned from SQL databases.
1639 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1640 kes Add more debug to FIFO code -- fix fifo regression test.
1642 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1643 kes Add thread timer to bnet_connect() to break from OS if wait time
1646 kes Update Win32 build to include new files, new symbols, and
1648 kes Implement socket level heartbeat (tcp_keepidle)
1649 ebl Commit File relocation patch
1650 kes Make bat have 'make install' target.
1651 kes Warn during install if old gnome-console binary found.
1652 kes Warn during install if old wx-console binary found.
1653 kes Add -8 option to bsmtp command line to add content type utf-8.
1654 Fixes bug #809. (Character coding problem in bsmtp).
1655 kes If < is found in target (from, to, cc) then do not enclose the
1656 target in < > in bsmtp. Fixes bug #772 (malformed address).
1657 kes When printing certain items in dbcheck, stop after 300000.
1658 Fixes bug #822. (dbcheck loops).
1659 kes Incorrect status in Dir after waiting for mount with poll set.
1662 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1664 kes Print waiting to reserve a device every 5 mins.
1666 kes Don't call close_part in label.c if tape and relabel.
1667 kes Don't free volume if busy in close() -- should help with
1669 ebl Fix #824 RunScript bug (After script could be execute twice)
1670 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1671 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1672 Add a regression script to test RunScript
1674 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1677 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1678 deprecated. No additional bugs will be fixed, and they will be dropped
1679 in a future release (probably 2.4.0).
1680 kes Change name of wx-console to bwx-console to make it more Bacula
1682 kes Change the name of gnome-console to bgnome-console to make it
1685 kes Some time in March, a Feature Request with patch from Jorj Bauer
1686 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1688 The ability for the director to validate a Client (FD) CN against
1689 an arbitrary set of patterns rather than the hostname, with
1690 A new 'TLS Allowed CN' set of directives which are implemented
1691 in the Client resource. Then pattern matching is used in place
1692 of hostname matching against the Certificate's CN. As an example, we
1693 have certificates which (a) use a local CA, and (b) have a CN of the
1695 kes Add new/changed entry points to Win32 build
1696 kes Create unaccepted-projects for projects that are not accepted.
1697 kes Simplify locking in the reservations system.
1698 kes Add more debug code in reservations.
1699 kes Make sure error condition on reserving a volume is handled correctly.
1700 kes Correct handling of volume_in_use.
1701 kes Correct handling of initializing a device.
1702 kes Move handling of broadcasting releasing a device into release_device().
1703 kes Correct attaching dcr to dev so that it is only done if device
1704 is properly initiated.
1706 kes Locking debug level tweaks in SD.
1707 kes Tweak new Volume code.
1709 kes Add exec external-command [wait-seconds] to bconsole. This
1710 executes the external-command. Note! normally external-command
1711 should be enclosed in double quotes.
1712 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1713 it should normally be off in a production system.
1715 kes Implement die command for SD so that we can force it to dump.
1716 kes Implement SD lock debug code.
1717 kes Implement new algorithm for keeping Volume list in SD. It
1718 is now owned by the device.
1720 kes Implement new code for freeing in use volumes that should
1721 resolve if not all, some of the problems of multiple drive
1722 tape conflicts described in bug 801.
1724 kes Fix gui/bacula-web/images files in svn.
1725 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1727 ebl Fix a bug in batch mode (in string escape)
1728 kes Correct migration prune SQL typo that crept in in a
1729 recent 2.1.x change.
1731 kes Move bnet_despool() into class in bsock.c
1732 kes Modify job report to include director name and Build OS.
1733 kes Move drop root privilege and check_catalog() before fork.
1734 kes Add update database scripts (version 9 to 10) to updatedb directory.
1736 ebl Check size and age of each file after its backup to see if
1737 it has changed during backup, if 'checkfilechanges' is set.
1738 The FD will do an extra check (stat(2)) after
1739 each file backup. mtime, ctime and size are compared with
1740 'before backup' information. If time or size mismatch, an
1741 error message will be generated. You must upgrade FD to use it.
1743 kes Make database name and user configurable
1744 --with-db-name=xxx --with-db-user=xxx
1745 kes Add back database type to message.c for debugging.
1747 kes Implement dir_sql() which issues an SQL query.
1748 kes Modify bat medialist to use dir_sql() and do some minor C++
1749 formatting as well as eliminating a number of pointers, simplifing
1752 kes Fix some of the mtx-changer grep commands for tape label readers.
1753 kes Convert a number of bsendmsg into the appropriate send/warning/error
1754 message class calls.
1755 kes Suppress the using database message in the .sql command.
1756 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1758 kes Add context menu for floating a window.
1759 kes Some minor cleanup and name changes in qt-console
1760 kes Add doing mt setblk 0 in Win32 mtx-changer.
1761 kes Apply Martin's bug fix to move definition of ENODATA for
1763 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1764 sqlite2 and sqlite3.
1766 kes More pruning cleanup.
1767 kes Turn on wait_for_drive by default in mtx-changer.
1768 kes Turn on Batch insert code by default as it now passes regression.
1769 kes Add ./configure --enable-bat to enable building of Bat.
1770 No install yet though.
1772 kes Implement a new .sql command for bat.
1773 kes Implement code to turn off pruning in obtaining the next volume.
1774 Pruning is turned off for the status dir command, but turned on
1775 for SD requests and for the list nextvolume command.
1777 kes Correct Qmsg() that was not updated correctly when committing a
1778 previous change (probably the recent TLS patch).
1780 kes Write new subroutine is_volume_purged() that explicitly checks
1781 if the Volume is purged, and if so marks it as such. This should
1782 resolve problems reported about needing to mount twice to recycle
1784 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1785 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1786 amount of duplicated code.
1787 kes Do volume pruning only for the Media Type desired (reduces pruning time
1788 if multiple Media Types are in the same pool).
1789 kes Implement more detailed info in the Job report for the Bacula version
1791 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1793 ebl Add bbatch tool to bench database and insert mode.
1794 Fix sql quote stuff in batch mode
1795 Fix sql stuff for mysql
1797 kes Correct problems with am/pm scheduling. Fixes bug #808.
1798 kes Implement new prunning code that prunes up to 1000 jobs at
1799 the same time. The same technique can be applied to a number
1800 of other prune/purge subroutines.
1801 kes Add an insanity check when starting a new tape job to ensure
1802 that the tape position has not been changed. If so fail the
1804 kes Fix Win32 build for dlls to add the folllowing:
1805 src/lib/bsock.c -- new file with new entry points
1806 src/lib/dlist.c -- new entry points
1807 src/cats/sql_create.c -- new entry point
1808 src/cats/sql_cmds.c -- new DATA item exported
1810 ebl batch mode cleanup bscan-test is ok now.
1811 kes Implement SD code to check length of disk volume before appending.
1813 kes Correct return status on db_batch... routines.
1814 kes Add call to db_write_batch_file_records() to migration code.
1815 ebl Fix AfterJob timing
1816 kes Move the checking of the database in initializion of the Director
1817 to after we drop privileges. This avoids the need for both root
1818 and bacula access to the DB.
1819 kes Correct a misplaced variable definition in src/filed/backup.c
1820 kes Correct how the new batch insert db_create_attributes_record()
1821 uses the arguments. Caused a seg fault in bscan.
1822 kes Implement lock() and unlock() methods in DEVICE class.
1823 Implement block() and set_block(xx) methods in DEVICE class.
1824 kes Modify bnet_connect() so that it uses time() to check for the
1825 wait time expiring (on some OSes, some system calls may not
1826 return immediately).
1827 kes Modify Verify to obtain the previous JobId when it is actually
1828 running rather than at schedule time (as it was in 1.38.x).
1829 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1831 kes When checking pid in pid file, continue running if the pid is
1832 the same as ours. This occurs on IRIX after a system crash.
1835 kes Extend new GUI API.
1836 kes Make the ua structure a class, and implement send_msg(),
1837 error_msg(), warning_msg(), and info_msg().
1839 kes Apply fix from for building wx-console on the Mac from
1841 kes Implement new select mechanism for GUI programs.
1842 kes Reorganize initialization of stackedWidgets in bat.
1844 kes Add updated nagios plugin supplied by Christian Masopust.
1846 kes More bat implementation.
1847 kes File migrate bug with Pool Occupancy using mediaid instead
1848 of jobids. Fixes bug #795.
1849 kes Fix orphaned buffers in filed backup and verify due to
1850 crypto buffers not freed during errors. Fixes bug #789.
1851 kes Extend new GUI api code to tree commands.
1852 kes Ensure that tree and dot commands check console ACLs.
1853 kes Permit marking directory with trailing slash.
1854 kes Allow 20 console connections (instead of only 10).
1856 kes Add smartctl call to bacula-sd.conf as an example of getting
1859 kes Modify jobq.c to let simultaneous restore jobs run. This may
1860 cause them to fail if they cannot get a drive.
1861 kes Add Client Connect Wait to Storage daemon to permit users to
1862 modify the time the SD waits for a FD connection.
1864 kes Correct virtual changer check which was backwards. This caused
1865 volumes to be unloaded into slots already occupied.
1867 kes Apply Command ACL filter to JobId list in restore command.
1868 kes Correct typeo in var.c patch.
1870 kes Don't let Bacula prune File or Job records for the current Job.
1871 kes Fix variable substitution pad + inc bug reported (with patch)
1874 kes Correct SQLite log table index as reported by Luca Berra.
1876 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1878 kes Begin implementing new comm signals for API.
1879 kes Fix a few places in lib/message.c where the open fd may
1881 kes Continue implementing lib/bsock.c (real class). Make jcr,
1882 who, host, and port private. There are new methods to access
1883 them for non-class use. This required touching a number of files.
1885 kes Add LANG=C to autoconf/randpass so it works with languages other
1886 than English. Fixes bug #788.
1888 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1890 You will not be able to generate Include/Exclude list any more.
1891 It will be fixed soon.
1892 If you want to use this, you can apply
1893 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1895 kes Restore of sockets created false error messages because Bacula
1896 no longer restores sockets, but the code was still trying to
1897 set the attributes on a non-existent file. Reported by a user.
1898 ebl finish RecyclePool feature
1899 Media will takes Pool.RecyclePool
1900 when moving from Scratch to a Pool or when user will do
1901 update volume=xxx frompool
1902 To use it, add RecyclePool = aPool to your Pool resource
1905 RecyclePool = Scratch
1909 kes Expand new BSOCK class adding signal() and new BNET signals.
1910 kes Begin enhancing the dot commands adding a new API function
1911 that returns more information and will make it easier
1912 to interface to the Director from a program.
1914 kes Make DEVICE fd private. Its new name is m_fd, and can be
1915 obtained with dev->fd() outside the class. This is the
1916 first of many DEVICE members to be made private.
1917 kes Implement Michael Renner's idea on having a virtual disk
1918 changer. I made some minor modifications (e.g. I did not
1919 implement the Virtual Changer directive, but simply set
1920 the Changer Command to an empty string.
1922 kes Implement a BSOCK send() method that writes the whole record
1923 in a single write() request rather than in two.
1924 ebl add update volume=xxx recyclepool=yyyy
1925 volume takes recyclepool from pool when using update volume=xxx from pool
1927 kes Fix encryption deblocking bug, which caused some restored files
1928 to be truncated. This fixes bug #763.
1929 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1930 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1932 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1933 ebl Use btime_t instead of uint64_t in media patch.
1935 kes Optimize the use of the database a bit in the Status dir command.
1936 Only open it when needed, ensure that if any previous database
1937 was opened, it is closed.
1939 kes Correct VolCatBytes bug from media patch.
1940 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1941 in the case of orphaned records.
1942 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1943 and File records in 300K chunks to be more efficient. This
1944 idea came from Juan Luis Frances (if I remember right).
1945 kes Apply Eric's scratch patch that moves a purged Volume to
1946 the RecyclePool. Question: how is RecyclePool set? what
1947 happens to the ScratchPool?
1948 kes Apply Eric's media patch that collects read/write media
1949 times as well as byte counts. This patch requires a
1950 simultaneous upgrade of the DIR and SD. Note, there
1951 should be some way to turn off timing. I'm not sure
1952 times are in Bacula units.
1953 kes Apply Eric's batch-insert patch.
1955 kes Update projects list.
1957 kes Implement Include/Exclude file lists in FD as dlists using
1958 the new dlistString class. This permits efficiently having
1959 large include/exclude lists and completes project Item 25.
1960 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1961 console is authorized to cancel the job. This fixes bug
1963 kes Modify SD so that the VolCatJobs medium record is updated
1964 at the beginning of a Job rather than the end. This
1965 fixes bug #775 where exceeding MaxVolJobs caused jobs
1967 kes Added a mutex around getting and setting Volume information
1968 so that multiple simultaneous jobs will single thread.
1970 Switch to using Subversion
1971 kes Remove src/pygtk-console/ from configure
1973 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1974 plus the entrypoints.
1975 kes Apply patch supplied that corrects debug print
1976 in canceling jobs for max run time. Supplied as
1977 part of bug #621, which was previously fixed.
1979 kes Test on job_canceled() and sd_msg_thread_done inside
1980 loop starting the message thread to avoid a race condition.
1982 kes Remove rl_catch_signal from console.c as it conflicted
1983 with the header definition. Fixes bug #765.
1984 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1986 kes Clarify some stored/acquire messages to indicate if the
1987 problem is with read or append.
1989 kes Fix memory leak with storage ids in cats/sql_get.c
1990 kes Terminate watchdog earlier to avoid reference to released
1991 memory -- reported by Jason Austin.
1992 kes Move closing the database from jobq.c to the director daemon
1993 termination routine. This fixes memory leaks for shadow jobs
1994 (i.e. migration jobs).
1995 kes Free up the unique jobid chain items in migrate.c. This fixes
1996 a memory leak problem.
1997 kes Convert some ugly looking for statements to use foreach_alist
1998 in findlib/find.c. This will facilitate converting the structures
1999 to use dlist (for large include/exclude lists).
2000 kes Fix a bug in the btree.c and btree.h routines, then rename them
2001 rblist and add them to be built in src/lib. Include some new
2002 methods written by Rudolf Cejka that make the code more readable
2003 (hides some of the ugly casting).
2004 kes Add set_next() and set_prev() methods which make the code much more
2005 readable. Also add a new dlistString class that facilitates storing
2006 strings in dlists. To be used in the large include/exclude lists.
2007 kes Make some trivial modifications to lib/tree.h that use rblist
2008 rather than dlist for storing the tree links. This was suggested
2009 by Rudolf Cejka. The result of this is that the restore tree now
2010 uses red-black binary trees rather than simple linked lists. This
2011 should give rather dramatic speed improvements for directories
2012 contining large numbers of directories/files (more than 10000).
2014 kes Fix maxruntime bug #621.
2016 ebl Implement the include JobID in spool file name project.
2017 kes Reorder projects file in order determined by Jan 2007 vote.
2018 kes Implement item #12 on project list -- quick release of FD by
2020 kes Fix open of SQLite3 db where user does not have write permission
2021 so that DIR does not crash. Fixes bug #761.
2023 kes Add back missing @ in Win32 Makefile.
2024 kes Change 'Device not configured to autolabel' from INFO
2026 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2027 which should restart an indefinite # of times.
2028 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2029 other DIR specifications.
2031 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2032 Fix path quoting in SQLite scripts.
2033 Fix problems with SHGetFolderPath.
2035 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2037 kes Fix Job restart on error bug that promotes an Inc to a Full
2038 backup. This should fix bug #755.
2039 kes Add qt-console and first cut of code.
2043 kes Fix Bacula->Documentation link on Win32 to point to index.html
2044 instead of bacula.html. Fixed bug #750.
2045 kes Return JobId in db_get_job_record() when JobId==0. This should
2047 kes Do not release source pointers when restarting a failed job.
2049 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2050 This *should* fix bug #747.
2051 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2054 kes Modify USTORE constructor to set an empty store_source string,
2055 and don't copy the store_source string in a cancel. Hopefully
2056 this will fix Arno's seg fault, bug #744.
2057 kes Add back code to disable conio in configure. Fixes bug #743.
2058 kes Correct the Options scanner in the FD to correctly handle
2059 SHA1 option, which was eating the next option. Reported by
2061 kes Add code to indicate when the SD is spooling, spool wait, and
2062 despooling as requested by Alan Brown.
2064 Version 2.0.0 released: 4 January 2007