1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
31 separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
36 kes Define a machine dependent ioctl request type for use with
39 kes When a migration job actually runs, re-check the Job record
40 and skip if the job is already migrated. This should
41 significantly reduce the problems with bug #1129.
43 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
44 turn off glibc checks that prevent getting good dumps.
45 kes Implement console 'wait mount' command. Doesn't yet work.
46 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
47 kes Break the do_swapping into do_unload, do_swapping, and
48 do_load. It is much more logical that way.
49 kes Implement a set_dcr_from_vol subroutine in acquire.c for
50 reading volumes. This allows the dcr to be refreshed after being
51 zapped when the wrong volume is mounted.
52 This should fix bug #1126 -- During multiple tape restore, bacula
53 does not ask for physical tape change, but rereads same tape
55 kes Apply patch submitted for bug #1107 with a small modification.
56 This fixes a bug where bcopy copied too many records.
57 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
59 kes Make the default bat restore Pool be Any. This fixes bug #1118.
61 kes Remove debug statement that crashes the SD at the end of
62 a tape during restore. Fixes bug #1125.
64 kes Implement Win32 bat changes made to Branch-2.4
66 kes Tweak separator command in console to start disabled and
67 allow defining no separator character. Also make code a
68 bit more fault tolerant.
69 kes Make btraceback write the traceback to the working directory
70 before attempting to mail it.
71 kes Add a RFC to Projects.
73 kes Attempt to implement a kludge to make Qt work with bat
75 kes Setup rstorage correctly. Virtual backups are working.
77 kes Move setting JobLevel and JobType into a method, which should
78 allow completing Virtual Backups.
79 kes Fix verify jobs to work again.
81 kes Virtual Backup tweaks -- it is close to working.
83 kes Ensure that SD tried to mount a volume not in an autochanger
84 at least once before asking for operator intervention.
85 kes Make SD aware of Virtual Backup jobs.
86 kes Add VirtualFull for bat.
87 kes Changes to get read storage correct for Virtual Backup.
89 kes Remove old code from label.c
90 kes Split display_display_info() out of write_bsr_file()
91 kes do_vbackup_init() working -- i.e. bootstrap file built.
92 kes Change Bacula trademark owner from John Walker to Kern Sibbald
93 kes First non-working cut of vbackup
94 kes Correct FD heartbeat code to use volatile variable accessed by
96 kes Zero thread id with memset if on Win32 in case it is a struct.
97 kes If cannot create JobMedia record, continue to try to write eof
98 and clean up in block.c
100 kes Add code to interface OpenSSL to new Win32 pthreads code which
101 used a structure for thread_t.
103 ebl tweak bat for win32 compilation
105 ebl Remove tokyo cabinet from the source
106 ebl Update configure/autoconf to support berkeley DB
107 ebl Add a sort to db_get_file_list() to improve bsr construction time.
109 kes Add a mtx-changer.conf file that is not overwritten during
110 an upgrade. It fully configures the mtx-changer script.
111 kes Clear in-use bit on vol when unused while swapping.
113 kes Remove sleep at end of ./bacula
114 kes Clear hash packet for hardlinked files correctly. This corrects
115 a long standing bug where hardlinked files selected individually
116 would occasionally not be restored.
118 kes Apply Eric's patch to ensure that autoprune does not return
119 a Volume not in the autochanger unless requested to do so.
120 kes Correct bat restore display of multiple drives. This fixes
122 kes Do find_a_volume() each time an unload is done. This
123 fixes the failure of maxvol2-test.
125 kes Add some SD debug code.
126 kes Do find_a_volume() each time an unload is done.
127 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
128 and adds --with-db-port to ./configure.
129 kes Use Qmsg() in job.c watchdog callback.
131 kes Release main control rwlock if ABORTing.
132 kes Make watchdog connect timeout queue messages rather than sending
133 directly to avoid lock conflicts with the real thread.
134 kes Add const char in dbd.c to avoid compiler warnings.
135 kes Fix python compiler string warning. Note, IMO the GNU C++
136 compiler guys have made a *very* bad change to their compiler.
137 They now force all strings to be 'const' unless you explicitly
138 cast them, which is extremely ugly and ruins nice code as well
139 as creates a lot of useless work.
141 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
142 mt. This fixes bug #1116.
143 kes Add const in python files to reduce compiler warnings.
144 This may have to be backed out because of later compiler
146 kes Fix failure of 2drive-concurrent-test. Always read label;
147 clear_unload() only after drive is defined in acquire_for_read().
149 kes Generally clean up the manual tape loading code. The main
150 conceptual change is that when a volume is marked to be unloaded,
151 its volume name is retained, and it is only marked as unloaded
152 when either the autoloader says it is unloaded or another tape
153 is read on that drive.
155 kes Add debug code and refactor subroutine in stored/mount.c
156 kes Fix format problem in bscan output reported in bug #1105.
157 ebl Fix get_next_volume_for_append logic with autochanger
158 - use pruned volumes if found
159 - don't reset the inchanger flag after getting a recycled volume
161 Fix recycle_oldest_purged_volume to take InChanger flag in account
163 ebl Add mmap/unmmap implementation for tokyodbm under win32
165 kes Make first step toward eliminating globals from config
166 scanning. Also should be a workaround for FORTIFY_SOURCE
167 GNU C bug -- fixes bug #1042.
169 kes Apply duplicate job tests to restarted jobs.
170 kes Copy more data when restarting a job so that run
171 overrides are kept. This should fix bug #1094.
173 kes More word alignment cleanup.
174 kes Fix bug where SD did not ask operator if the device could not
175 be opened. Reported by Eric.
177 kes Add dbuser to DIR conf file (replaces user).
178 kes Add --with-db-password to ./configure
179 kes Fix regress to handle db_password.
180 ebl Add new "status storage slots" that list autochanger
182 ebl Update vtape driver to compile only under Linux.
183 ebl Fix a bug when restoring with a wrong mediatype.
185 kes Eliminate ints from conf files and structures to avoid
186 word alignment problems
188 kes Fix bug reported by Scott Barninger where the bacula script
189 refers to scripts in the wrong directory. Needed to meet the
190 requirements of recent FHS location changes.
191 ebl Disable vtape for FreeBSD.
193 ebl Modify disk-changer to check if slot contains something before
196 ebl Fix vtape on win32 and debian.
197 ebl Fix autoselect patch (cause segfault).
199 ebl Fix autoselect option broken for a while. Fix #1089. Need some
200 work with StorageId to be able to use a particular drive in a
203 ebl Rename vtape to vtape.
204 ebl Update vtape driver.
206 ebl Modify vtape driver to avoid sparse file.
207 kes Add make clean of qt-source directory during ./configure
208 kes Store last block number written to tape in DEVICE and
209 use it for testing for correct last block on EOT.
211 Release Version 2.4.0:
215 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
216 This fixes bug #1095.
218 kes Add create_postgresql_database.sql to Win32 installer. Should
219 fix problem reported by Juilio Monteiro.
220 kes Get correct slot when auto unloading a device. This fixes bug
223 kes Fix multiple media restore.
224 kes Make DEVICE Slot private and access it via a method.
225 Allows better control over when it is set and cleared.
226 kes Fix possible seg fault if SQL error.
228 kes Add Martin's fixes to argument scanning for the estimate
229 command. This fixes bug #1093.
230 kes Add debug code to SD.
231 kes Fix renaming a Volume, which used the wrong Volume name.
233 kes If operator has rewind tape, print warning, release tape and
234 try once more. If tape is positioned somewhere, something went
235 wrong, so mark the tape in error and try once more. Previously
236 this error was fatal, now it produces an error message.
237 kes Ensure correct volume name displayed during restore
238 kes Ensure that Volume is mounted for restore.
240 kes Fix a few more Coverity reported problems.
242 kes Apply Allan Black's status dir job count patch.
243 ebl Add information about IMPORT/EXPORT slots in mtx-script.
244 kes Enhance a couple of SD debug messages.
245 kes Tweak unload flag setting and ensure it is set during swap.
247 ebl Fix #1091 about bad output in estimate command.
249 kes Modify autochanger locking to attempt to avoid race
251 kes Make sure device not busy before doing label command.
252 kes Display open() errors except when polling. Previously too
253 many were suppressed. This should fix bug #1070.
254 kes Fix Win32 reparse points. Bacula will not recurse into any
255 reparse point directory, including mount points, unless the
256 directory is explicitly mentioned at the top level (same as
257 with Unix). A file that is linked to another file will be
258 backed up -- much as Unix does for hardlinked files.
259 This fixes bug #1041.
261 kes Remove double quotes from ChangeLog and ReleaseNotes
262 kes Remove StorageId test when pruning and recycling (Eric's changes).
263 kes Remove old form of locking when getting volumes -- causes deadlock.
264 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
265 the name unique and to eliminate compile time error.
266 kes Add accurate.o to Win32 FD Makefile
268 kes Fix cats dll build on Win32 after db_update_job_end_record
269 calling sequence change.
270 ebl Switch to tokyo dbm instead of htable in accurate code
271 ebl Include tokyo dbm to bacula source tree
273 kes Fix buffer overruns detected by Coverity.
275 kes Tweak joblog display.
277 kes Implement --without-qwt
278 kes Fix layout of restore tree dialog
279 kes Add configure bat QWT libraries, so that bat can be built
280 with or without the QWT libaries.
282 ebl Add dummy tape driver for regression tests.
283 kes Make sure we unload the right slot when swapping.
285 kes Add debug times, reduce size of two-pool-changer test
287 ebl Tweak autoconf scripts for vtape
289 kes Improve SD reserve debug code.
290 kes Testing an improvement to free up volumes no longer in use.
292 kes Rework SD acquire for read to handle autochanger Volume
294 kes Implement regression that explicitly tests swapping a Volume
295 from one drive to another.
296 kes Enhance disk-changer to detect most error conditions.
297 kes Fix SD code so that it properly swaps a Volume between drives.
298 This fixes bug #1083.
300 kes Apply libdbi patch from Joao Freitas for regress and for
301 Bacula trunk. Regress now works with libdbi. Nice.
302 kes Apply .nobackup patch from bug #1077 submitted by
304 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
305 name into jobs cloned via the run directive.
307 kes Prevent a Volume that is being swapped from being freed from
308 the volume list. This will most likely fix, at least partially,
310 kes Fix strippath so that it does not get a buffer overrun and crash FD.
311 This fixes bug #1078.
312 kes Remove 50 millisec wait in SD that broke debugger.
313 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
314 that a job may run, counted from when the job was scheduled.
315 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
316 a job may block waiting for a resource, counted from when the job starts
317 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
318 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
319 that implements multiple commands per line in the console when using
320 readline. Modify the default to use a semicolon as the command separator.
322 ebl Fix SQL query in migration code.
323 ebl Make accurate mode with hash disk pass regression tests
325 ebl Implement first cut of accurate backup with hash disk.
327 kes Force unload of volume when wrong volume mounted in SD.
329 kes Fix bat seg fault at termination.
330 kes Add Bacula generated version to bat about box.
333 kes Experiment with allowing multiple read jobs.
334 kes Move final volume swapping code to DCR method and
335 call it from acquire_for_read().
336 kes When wrong volume is mounted during read, unload_autochanger.
338 kes Integrate the libdbi changes from Joao Henrique Freitas
340 kes Stop searching for Volumes in SD askdir if DIR returns the
341 same volume name twice in a row.
342 kes Close bat console windows first to eliminate error message
345 kes Tweak the swap Volume from one drive to another code so that
346 it now seems to work.
347 kes Resolve several problems with recycling that broke the new
348 code (these problems are in 2.2.9 as well).
349 kes Remove the volume lock when calling the sysop code.
350 kes Don't mark a reserved volume with no writers as unused otherwise
353 kes Rework class structures for VOLRES, DCR, and DEVICE to make
354 the method names a bit more logical, and for more logically
355 handling the responsibilities.
357 kes Remove redundant code in terminating the scheduler that just
358 causes a seg fault in many cases.
359 kes Cleanup releasing a volume and make it a DCR method.
360 kes Improve algorithm for detecting pre-reserved volume and
363 kes Tweak volume swapping code so it works.
364 kes Correct name overloading in mount.c
365 kes Replace released flag in VOLRES with reserved and add access
366 methods for the VOLRES class.
367 kes Prevent volume from being released while being swapped.
368 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
370 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
372 kes Refactor parts of stored/mount.c
374 ebl Add sanity checks for VolWriteTime and VolReadTime
375 ebl Take care of bad clock changes while computing VolWriteTime
376 and VolReadTime. This should fix or limit #1066
377 kes Correct error string numbers in dird/catreq.c
378 kes Restructure reserving, acquiring, and mounting volumes. Calls to
379 autochanger are deferred for mount.c -- simplifes the code.
381 kes Do not prune any running job. It just fails the job.
382 kes Lock the volumes when changing dev->reserved_device and marking
383 the volume unused otherwise the device can get reserved by
384 another job before the volume is released, thus blocking it.
386 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
387 kes Fix bug #1063, reuse of freed ptr in list nextvol.
388 kes Release regex compile buffer in filed/job.c
389 kes Add proper type of const char in sql_create.c
390 kes Turn off debug in daemon termination routines
391 kes Move free_volume_list() before devices are freed in stored.c
392 kes Fix reference to uninitalized stack variables in bregex.c.
393 This should correct bug #1067.
395 kes Fix possible seg fault in SD when freeing a volume entry.
397 kes Implement unload_dev() before swap device.
398 ebl Add statistics prunning with option and menu
399 kes Separate unload_dev() from unload_other_device() in autochanger.c
401 kes Apply patch from bug #1069 that corrects spurious error messages
402 when ACLs enabled on SGI but no ACL exists.
403 ebl Fix small segfault in bacula-sd when debug level is 500
404 kes Modify run_program() and run_program_full_output() to use
405 call by reference for the results string. This corrects a long
406 standing problem where the address of the string may be changed
407 in the subroutine but not in the calling program.
409 kes Re-enable code to remember last volume mounted on a non-tape
411 kes Add patch supplied in bug #1068 that fixes a SD crash when using
412 a Virtual autochanger.
413 kes Generate correct JobMedia records during spooling/despooling when
414 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
415 <tih@hamartun.priv.no> for excellent analysis and testing.
417 kes Tweak hash algorithm for htable using Martin Simmons idea
418 for doing a circular shift.
419 kes Remember what volume is in VTLs (previously turned off for
421 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
422 pointed out some problems in creating JobMedia records during
423 spooling with concurrent jobs. Fix the problem by updating the
424 start file position before despooling and generate a jobmedia
425 record at the end of despooling.
427 kes Fix handling of JobMedia records during spooling and when a
428 Volume is changed without actually writing data to the Volume.
430 kes Rework certain SD locking based on gdb tracebacks of deadlocks
431 sent by Eric. This code now uses only the volume_lock() rather
432 than the reservations lock when at EOM and acquiring a new
434 kes Ensure only one exit point in several subroutines.
436 kes Implement bsock code to permit locking. Use the new code in Verify
437 in the FD to prevent the heartbeat thread from disrupting the Verify
438 data sent to the Dir.
439 kes Modify SD locking to eliminate locking the reservations system from
440 outside the system. Use the volume lock when getting media data
441 and reserving a new volume at end of media.
442 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
443 when SD starts are not locked into place.
445 kes Fix error compiling runscript code on 64 bit machines.
446 kes Tweak Win32 mount point code.
447 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
448 cleared giving bad file estimate).
449 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
452 kes Keep Schedule run lists in order as suggested by
455 kes Implement autostart scripts for Debian.
456 ebl Implement upgrade catalog scripts.
458 ebl Apply jobstat patch for long term statistics. Have to implement
459 purge stats command and upgrade scripts.
460 kes Fix mtx-changer.in for broken Debian mt program.
462 kes Fix large number of JobMedia records reported by Eric Bollengier.
464 kes Apply doc fix from bug #1062.
465 kes Resolve crash and improper restore wx-console Win32 restore
466 GUI. Fixes bug #1065.
467 kes Update Win32 wxWidgets to latest version.
468 kes Attempt to do correct handling of Win32 mount points. Should
470 kes Fix Win32 FD backup/restore memory leak due to improper termination
471 of BackupRead/Write. This fixes bug# 1038.
473 ebl Reduce memory usage for accurate backup, working only with ctime
474 and mtime. (not all Lstat field)
475 About 40MB for my Linux system (400.000 files)
477 kes Add dcr->reserved_volume flag that allows us to release a volume
478 even if it is not vol->released. This allows maxvol2 to work when
479 Volumes expire and we are already writing to the device (i.e. a
480 volume is pulled out from under us by another job terminating after
481 we reserve the drive).
483 ebl Permit multiple command/console per runscript definition.
484 RunScript { command = /bin/true ; command = /bin/false ... }
485 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
486 (restart an application) just after the VSS snapshot on windows.
487 kes Don't zap dcr values during release_volume() as they might
488 have the next Volume to be mounted.
489 kes Fix AIX prototype.
491 kes Second cut of drive switching during backup.
494 kes Update Win32 version of wxWidgets to most recent version.
495 kes Tweak Copy job details.
496 kes Rework dir_find_next_appendable_volume to make a bit more effort
497 to find a suitable volume before giving up.
499 kes Make ask_sysop_to_create... to return if waken from wait.
500 This helps get out of blocked conditions.
501 kes Experimental implementation of switch_device in reservations.
502 kes Implement FD version to allow easier protocol changes.
503 kes Add Plugin Options string -- not yet passed to FD.
504 kes Implement PluginOptions ACL.
506 kes Attempt to correct problems with restores with autochangers and
507 use counts going negative
508 kes Rework SD status command and implement API for bat. Implements
509 header, runing waitreservation, devices, volumes, spooling,
510 and terminated status keywords.
511 .status storage=xxx <keyword>
512 kes Clarify TLS error message by adding double quotes around name.
513 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
514 kes Pass jcr to tls routines so debug messages can be handled better.
515 kes Rework jobq resource allocation code, and possibly fix a bug
516 that caused reference counts to get out of sync.
518 kes Rename fd/dir plugin to use Bacula standard underscore.
519 kes Plugin work -- bring dir up to fd level.
520 kes Start implementation of VTL code
521 kes Fix Win32 build after adding new cats subroutine.
523 kes First cut at Duplicate Job implementation.
525 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
526 kes Start PluginOptions string, and refactor a bit of ua_run.c
527 ebl Apply Allan patch that permit to reset recyclepool.
529 kes Test patch -- possible fix or improvement for bug #1053
530 kes Refactor FD and SD status commands to permit new API code in
531 SD, and to fix Win32 build.
532 kes Win32 build is now working.
534 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
535 some ideas in patch from Scott Bailey.
536 kes Begin implementation of duplicate Job control.
537 kes Fix some of Win32 build after recent additions.
538 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
539 which causes the FD to detect whether or not the OS has the
540 honor no dump bit (*BSD systems), and if so, to skip backing up
541 any file with this bit set. The feature is enabled by setting
542 'honor no dump flag = yes' in the Options section of a FileSet.
544 kes Correct po warning message with datarootdir
545 kes Implement more code in dird.c to put configuration parsing in
546 a class rather than use globals.
547 kes Restructure SD status command for implementation of bat API
550 kes Suppress incorrect 'Will not descend from x into y' messages.
551 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
552 daemon globals used by parser.
553 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
555 kes Fix free of plugin_list when none exists.
557 ebl Apply accurate project patch.
559 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
560 on non-mempool object)
561 kes First cut of converting FD .status to work with bat API.
563 .status client=XXX header
564 .status client=XXX running
565 .status client=XXX terminated
566 kes Implement first cut of Copy Job.
567 kes Implement Catalog in Pool resource. It overrides catalog specified
568 in the Client resource.
570 kes Apply patch (with some difficulties) from Joao Henrique Freitas
571 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
573 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
574 ftruncate() actually works. In the case of some (cheap) NAS devices,
575 it does not, and so recycling NAS Volumes does not work. The code
576 simply unlink()s the file, then recreates it. This fixes bug #1011.
578 kes First incomplete cut of big malloc blocks for htable.
579 kes Tweak plugin code.
581 kes Plugin debug code + tweak a couple bat dialog layouts
583 kes Fix creating first JobMedia record during Migration to include
584 proper index. This caused slow restores of migrated jobs.
585 kes Temp fix to plugin name file_index.
586 kes Bacula backed up and restored a MySQL database.
588 kes Implement plugin restore.
589 kes Implement parsing of db_driver to give db_type index.
591 kes First cut of plugin restore code.
592 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
593 and do not strip paths on symbolic links.
594 kes Set catalog backup database and user name from values specified on
595 the ./configure line.
596 ebl Fix #1031 about wrong pool source information in job report.
599 kes Remove a redundant jcr argument to find_files, match_files, and
601 kes Implement '.status dir header|scheduled|running|terminated' that
602 prints the requested status section. With the exception of the
603 header, the other reports have fields separated by tabs (\t).
605 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
606 a resource embedded run command to find a since time if no explicit
607 since time was supplied on the command line.
608 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
609 that updates the state file at job termination time in addition to
610 when the daemon terminates.
612 kes First version where a plugin did a backup.
613 bpipe-fd.so created a backup file, wrote a test
614 string to it, and Bacua could restore this fabricated file.
616 kes Implement DB Driver = string for the DBI driver.
617 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
618 kes First cut of code for loading Win32 plugin dlls. Implement
619 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
620 and implement a dlfcn.h file based on opengroup's definitions of
623 kes First cut plugin directives.
625 kes Apply patch from bug #1049 to prevent stripping the path on a
627 kes Attempt to fix bug #1047 where stripping a path corrupts the
628 heap. Waiting for feedback.
629 kes Correct the Mount message not to suggest labeling a new tape
630 when doing a restore. Submitted by email by John Stoffel.
631 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
632 FD by using casting. Reported in bug #1042.
634 kes A bit of crypto cleanup. More later.
636 Release Version 2.2.8
638 kes Apply patch from Martin to correct bug #1040, bscan sets existing
640 kes Fixed important spelling error in doc -- bug #1045.
642 ebl Fix bextract to be able to extract non-portable Win32 data to
644 kes Move initialization of read/write res lock earlier in the code.
645 This fixes the crash with a null conf file. This fixes bug
647 kes Redefine CURES in lib/parse_conf to be URES and move it all
648 into lib/parse_conf.c -- this responds to bug #1042, but does
649 not fix it. The fix is not to compile with FORTIFY_SOURCE.
650 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
651 the trunk SVN. I don't think this was reported as a bug.
653 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
655 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
657 kes Add DataDespooling and DataCommitting status (committing is
658 the last despooling).
659 kes Finish implementation of new reservations code noted below.
661 kes Fix bsnprintf for float point numbers. I broke recently when
662 parameterizing some variables. This fixes bug #1036.
663 kes Undo recent reservations changes ... will apply them later
664 when they work better.
666 ebl Fixes #1034 which cause mysql to hang the connection after 8h
667 ebl Change default statistics target of filename.name and path.path
668 fields for PostgreSQL. This speeds lookup by indexes. Thanks
670 kes A few more tweaks to new reservation code. Make sure to clear
671 vol released flag when retaking volume. When reading label and
672 label is bad mark volume unused. When recycling, mark volume
673 unused so it can be renamed.
675 kes Fix reserve_volume() so it doesn't release a volume in use
676 (i.e. a volume entry not marked released). This should be
677 the last part needed to fix bug #1018.
679 kes Move Heartbeat documentation from Job to Director resource.
680 This fixes bug #1033.
682 kes Fix existing switch drive SD code to call autochanger to release
683 any old volume. This must be done to keep the autochanger from
684 releasing subsequently newly reserved volumes in doing a close().
685 This should fix bug #1018.
686 kes Fail if attempting to get console input in batch mode. This
687 should help fail RunScript console commands that are incomplete.
688 kes First cut implementing switch_drive() in SD (not actually called).
690 kes Implement first cut running console commands in a RunScript.
692 ebl Fixes bug #1028 where 'Selection Type' option was not usable
694 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
697 Release Version 2.2.7
699 kes Add new free_tls() entry point so that Win32 builds.
700 kes Fix compile warning in src/lib/util.c
701 kes Fix entry point for edit_job_codes() so that Win32 builds.
702 kes Fix seg fault Frank Sweetser reports in regression testing
703 on his systems. The problem was that the original author of
704 bsnprintf.c did not take into account the side effects of
705 using ++x in the argument to a #define.
706 kes Make SD protocol backward compatible with version 2.2.x.
708 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
709 because Bacula no longer restores sockets.
710 ebl Always use ignorecase fileset option on win32 FD.
712 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
713 that implements double quoting include names in conf files,
714 and also allows piping input by having the first character
715 be a vertical bar (|).
716 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
717 that implement %f in RunScripts to pass the FileSet name.
718 kes Skip leading | when lex input comes from a pipe as suggested
719 by Michael Stapelberg <michael@stapelberg.de>.
721 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
722 Nerijus Baliunas <nerijus@users.sourceforge.net>
724 kes Implement Plugin Directory and plugin events.
726 kes Implement a security enhancement: TLS authentication but no
727 encryption. Enabled by setting 'TLS Authentication = yes'.
728 Note when this is on, TLS encryption is turned OFF!
730 kes This patch corrects a problem where the maximum concurrent storage
731 jobs counter gets out of sync during restore jobs causing jobs to
732 'wait on max Storage jobs'. This patch fixes bug #1009.
734 kes This patch fixes bcopy so that it produces correct Volumes.
736 kes This patch eliminates spurious output to the console during a VerifyVolume
737 job that contains encrypted data. It fixes bug #1024.
739 kes This patch prevents the 'status dir' command from trying to use a scratch
740 volume and possibly moving it from one pool to another. This patch fixes
743 kes Add new include to postgresql.c suggested by Marc Cousins so
744 that it compiles correctly with pgre version 8.3.
746 kes Fix --archivedir addition to configure. Replace it with
747 --with-archivedir in configure.in This fixes the regression
749 kes This patch fixes bug #1012 where the job is canceled because
750 of Max Run Time exceeded when the job has not yet started.
752 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
753 one 'part' to write. Instead of each part being stored on disk,
754 written to DVD, then deleted from disk, all parts are written to disk,
755 and only the last is written and deleted from disk.
756 kes This patch fixes the status command to include the formating string for
757 JS_AttrInsterting. It fixes bug #1021.
758 kes This patch should fix the Mac OS X build problem on the latest
759 Darwin, where sys/types.h was not included correctly (apparently
760 due to a change in the Mac headers). The solution was to explicitly
761 ensure that it is defined for the ./configure.
762 This patch also has a rebuild of configure that includes the Debian
763 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
764 kes This patch should ensure that queued messages to the console are
765 displayed as soon as possible. It should fix bug 1007, but has been
766 reported not to work.
768 kes This patch fixes the infinite loop when trying to increase the
769 maximum number of volumes in a Pool during the add command.
770 This patch fixes bug #1008.
772 Release Version 2.2.6
774 db Remove extra data on estimate command in joblist for bat.
776 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
777 really change anything, but is the beginning of doing it *right*.
778 To do it completely right the LastWritten date must be passed to
779 the SD, but it is not yet done.
780 kes Minor tweaks to some bat restore SQL.
781 kes This patch fixes bug #1003 where putting the message output from
782 a Verify job into the catalog results in a recursive loop. The problem
783 seems to show up only with postgresql (to be verified).
784 kes Correct %x to %p in postgresql debug statement.
786 kes Fix bug #942 where lots of emails where generated when the heartbeat
787 interval was low and Bacula wanted a different tape from the one in
790 ebl Add new SD despooling attributes and Dir inserting attributes
791 job status codes in the catalog (Status table).
793 ebl Use qmake-qt4 instead of qmake when available (debian system).
795 kes Add a security warning to src/cats/make_catalog_backup.in indicating
796 that passing the password via the command line (arg 3) is insecure.
797 This responds to bug #990 (it doesn't fix it).
799 kes Set default debug_level to zero. This corrects bugs #991 and #993.
800 kes Fix a crash in bat when it cannot connect to the Director for example
801 if the Director is not running.
802 kes Remove redundant INDEX (JobId) from File table in the trunk.
804 kes Make explicit exception to GPL in LICENSE to permit linking
805 the Win32 FD with Microsoft VSS code.
806 kes Apply the Solaris package patch from
807 Masopust, Christian <christian.masopust@siemens.com>
808 kes Apply the patch to optionally add a timestamp in the debug output
809 submitted by Mariusz Czulada <manieq@wp.eu>.
811 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
812 backend (sql_strerror). Fixes bug #989
814 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
815 It applied with no problems.
816 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
818 kes Redirect stderror to stdin on mt status command in mtx-changer.in
819 since the status is returned on stderr on Solaris.
820 kes Activate Close button on tray-monitor window. This fixes
822 kes Check for NULL item in parse_conf.c before calling it. In the
823 case of Device, there is no item and this caused a seg fault when
824 Device appears in the conf file.
825 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
826 avoids pulling in config.h multiple times in some new code.
828 kes Fix spurious warning message printed when creating a volume with
829 a LabelFormat. This fixes bug #976.
831 Release Version 2.2.5
833 kes Add JobId in place of Job name in all the Jmsg() output.
834 kes Correct the APP_DESC for the Win32 storage service (remove an e).
836 kes Make maxvol-test and new more strict maxvol2-test work.
837 kes Print JobId in all Jmsg() job output.
839 kes Add new SD despooling attributes and Dir inserting attributes
840 job status codes. This fixes bug 961.
841 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
843 kes Fix doc issue. This fixes bug #963.
844 kes Fix listing performance problems in bat. Pointed out by
846 kes Remove old debug code.
847 kes Fix bat code that tests for Win32. This should fix bug #968
848 kes Query 5 list wrong Vol after migration. This fixes bug #960
850 ebl Fix #969 where user can't change Replace option in restore menu.
852 kes Save jcr in thread specific data (tsd) for each thread.
853 kes Make Dmsg() print JobId as -%u.
854 kes Make Jmsg, Emsg, and others automatically pickup the jobid
855 for the thread if it exists.
856 kes Remove old reservation debug jid code.
857 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
858 ebl Add an option that permit to specify spool size in job
859 definition. (Applying patches/testing/spoolsize_per_job.patch).
860 You must upgrade SD and DIR at the same time.
861 dvl Add new configuration item --archivedir
862 dvl Adjust regression tests to use tmp not /tmp. This will allow
863 multiple concurrent runs of the regression tests.
865 kes Fix race condition that drops final block written to volume.
866 This happens in rare cases with multiple simultaneous jobs
867 when the Volume fills. This fixes bug #964. May be related
868 to bug #935 and possibly #903.
869 kes Eliminate more strerror() and replace with bstrerror().
870 kes Remove BSD getopt and replace with unrestricted IBM version.
871 kes Fix Win32 build for changed calling sequences.
872 kes More tweaks to the mount volume routines to get everything
873 right. Changed variable name from find to have_vol, which is
874 much easier to understand.
875 kes Enhance btimer debug code.
877 kes Fix FD->SD authorization failure, which was due to spurious
878 wakeups from a pthread_cond_timedwait(). Simply check the
879 predicate before continuing. This fixes bug #953.
880 kes Add const char where needed (more to do). Remove temp debug code.
882 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
883 kes Don't overwrite error message in check_tables_version.
885 kes Unlock batch insert tables with same calls used elsewhere.
886 kes Allow starting 59 jobs a second.
887 kes Make SD session key more random.
888 kes Add retry for SQLite opening db if it fails. Probably helps
890 kes Suppress extra error messages during batch insert failure.
892 kes Add jcr to timer packets so if killed message can be sent to job.
893 kes Add JobId to all Dmsg() output.
894 kes Put some FD auth code on dbglvl rather than fixed.
895 kes Return insert attributes error message in db msg buffer to avoid
896 false error messages. Helps fix bug #966.
897 kes Separate batch init error messages. Probably helps fix bug #966.
898 kes Make SD code that contructs attribute insert check string lengths
900 kes If Dir gets an error during inserting attributes, cancel SD.
901 This reduces unnecessary error messages.
903 kes Correct search boolean for getting Volume info
904 ebl Cleanup batch insert code. Probably fixes bug #965.
905 kes Back out one small change to the reservation system (reserving a volume).
906 kes Rework how a Volume is mounted. It is now much more intelligent and
907 will always attempt to use any mounted volume if possible and reduces
908 calls to the Director asking about volumes.
910 kes Turn off some code when batch insert not enabled.
911 kes Edit FD name in connect error messages.
912 kes Rework the reservation system to take into account that the Director
913 might give us a Volume that is different from the current one being
914 used, and to ensure that we don't exceed Maximum Volume Jobs.
915 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
916 fatal error with multiple jobs running'
917 kes Add more debug code in reservation system.
918 kes Implement maxvol-test to check bug #947.
920 kes Add code to handle tray monitor separated from Win32 FD.
921 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
923 kes Add missed return in fixing verify bug -- trunk only.
924 ebl Fix a command parser issue causing a director segfault.
925 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
927 kes Increase the max block size to 4MB fixes bug #957.
928 kes ERABT if user sets min block size > max block size. Fixes bug #956.
929 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
930 is not properly mounted (recognized) during a poll.
931 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
932 Job that has differences reports Verify OK.
933 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
935 ebl Add an option to operate on all pools with update vol parameters.
936 This complete the project 20. Patch from Nigel Stepp.
937 ebl Add history support to bconsole when using readline.
938 Using Ctrl-D to exit doesn't update .bconsole_history
939 kes Modify new volume algorithm to use max MediaId for generating next
940 volume number rather than the count of Volumes. This should essentially
941 eliminate the failure rate if some volumes were deleted. Bug #921.
942 kes Begin implemention of Optimize Job Scheduling.
943 kes Implement restore callback that Dirk and I agreed on for bat
944 restore. This fixes bug #928. Restore of backup of zero files fails.
945 kes Fix SQL Catalog logging which broke with new db_escape_string
948 Release Version 2.2.4
950 kes Fix bacula_cats.def for new db_escape_string().
951 kes Increase size of name string when FD making connection to SD.
952 May fix bug #953. FD->SD connection failure.
954 kes Add code to help Dan debug 2drive-incremental-2disk test.
955 kes Add code to try to fix bug #908.
956 kes Add waits to multiple exit detection code to try to force pid
957 file to always be deleted.
958 kes Restore good dev.tar.gz to rescue set appropriate binary property.
960 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
961 trying to switch drives by checking for blocking before unblocking.
963 kes Cancel storage daemon in all cases where FD reports error. This
964 should fix virtually all cases of bug #920.
965 kes Fix db_escape_string() for MySQL which did not compile.
967 kes Fix error message that was clobbered when Dir tells SD it does not
968 have write permission on Volume. This should fix a minor point
969 in bug #942, but not the main problem.
970 kes Add code to cancel job in SD if FD connection fails. This should
972 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
973 dvl Pass jcr and db into db_escape_string() to enable better escaping
975 kes Fix migration code to get correct Volume name with multiple volumes
976 by skipping |. Fixes bug #936.
977 kes Implement patch supplied by Landon to fix bug #944 where using
978 TLS with bconsole uses 99+% of the CPU.
979 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
981 kes Move patches into patches directory.
983 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
986 ebl Using 'm' in bconsole will show messages like before,
987 and not memory usage.
988 kes Fix bug #935, and probably also bug #903 where files were not
989 restored. MediaId was not properly set in JobMedia record after
992 kes Suppress chown and chmod error messages if the FD is not running
995 kes Apply Martin Simmons' patch that should turn off the new API usage
996 when batch insert is turned off allowing building on older
998 kes Add ./configure search in qwt-qt4 for qwt package
1000 kes Bacula is now free of 3rd party GPL copyrighted code!
1001 kes Remove idcache.c
1002 kes Add guid_to_name.c/h which replace idcache.
1003 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1005 ebl Detect if new PosgreSQL batch insert API is present.
1006 kes Correct incorrect mempool call causing Director crash. Occurs on
1007 systems without va_copy().
1008 sb Update spec files for 2.2.1 release
1010 kes Fix memory pool call in ua_output.c. bug #934.
1011 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1012 Add test program to fnmatch.c
1014 kes Integrate patch to README.vc8 from
1015 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1016 edit it to get it into Unix patch format.
1017 kes Implement mkpath.c to replace old FSF makepath.c
1019 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1021 Release Version 2.2.1
1023 kes Update POTFILES.in
1024 kes Cleanup a few underquoted AC_DEFUNs in configure
1025 kes Apply patch from Martin Simmons that adds a test for va_copy to
1028 kes Fix bug #921 by increasing the number of tries to create a new volume
1030 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1031 can be called multiple times. Implement a version for machines
1032 without va_copy() that gets a big buffer.
1034 kes Integrate more portable zone offset code into bsmtp.c
1035 Submitted by Attila Fülöp.
1037 kes Fix bad SD->FD return status reported by
1038 (James Harper) <james.harper@bendigoit.com.au>
1039 ebl Fix a bug in read_close_session which return random status
1040 thanks to James Harper
1042 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1043 and directory names during restore of single file/directories.
1044 kes Add sanity checks to .sql command when string is empty. Hopefully
1045 that will resolve Dirks Director crash.
1047 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1048 in the bsmtp chat subroutine when debug is >= 10.
1050 kes Fix Director crash when running bat SQL queries.
1051 kes Add David's notes on Item 8: Copy pools.
1053 kes Rework projects file to be current and ready for a vote.
1054 kes Enhance lex scanner error message.
1056 kes Tweak LICENSE file to mention BSD code.
1057 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1058 if specified on the ./configure.
1059 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1060 This class is intended to allow us to open a second bsock to the
1061 Director while in the restore subdialog.
1063 kes Fix configure to create bat Makefile before creating dependencies.
1064 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1065 kes Add a tooltip to the tray monitor.
1066 dvl Set the Director's PID file before dropping privs. This fixes
1069 kes Update AUTHORs file
1070 kes Increase the default max concurrent jobs to 20 in FD and SD to
1071 correspond with the default .conf files.
1072 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1073 some different, of the same file created by RN when porting the
1075 kes Rearrange some of the Win32 directories and the placement of the files
1077 kes Set DEVELOPER flag in version.h
1079 ========================================================================
1080 Release Version 2.2.0
1082 kes Apply a second doc patch from Marc.
1083 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1084 improves the tips section that discusses how to setup multiple
1087 kes Update bat README file.
1088 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1089 corrects a typo in the Recycle status check in db_find_next_volume().
1090 This will probably fix a number of annoying problems with multiple
1092 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1093 bnet calls -- no functionality change.
1095 kes Modify the Verify output to specify if files are missing on
1096 the Volume(s) or disk. Fixes confusion in bug #916.
1097 kes When more than one Volume is read in a migration job, the last
1098 Volume bytes reported are from the last read volume rather than
1099 the last written volume. Fixed. This fixes bug #910.
1100 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1101 It previously printed New Recyle flag is: no. This fixes bug
1104 kes Correct seg fault when switching tape drives during restore.
1105 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1106 be used until after 2.2.0 release.
1108 kes Remove fnmatch() in SD that permitted wild card specifications.
1109 This fixes bug #914.
1111 kes Fix %g in filename returned by SQL for browse tree reported by
1113 kes Fix configure so that it puts config.out in the cwd rather than
1115 kes Attempt to fix the locking problem reported by Eric in bug #906.
1116 kes Make berrno class to leave errno unchanged after constructor call.
1117 kes Make bnet_server use the heap rather than the stack to allocate
1118 its socket fd pointers to avoid a crash at termination. Problem
1119 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1121 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1122 and putting it in depkgs-qt along with Qt4.3.
1124 kes Rework code in acquire.c that switches drives for reading when
1125 the Media Type does not match. This should fix bug #906
1127 ebl Fix a director segfault during job setup #907
1128 kes Correct seg fault in postgresql when first operation returns no
1129 rows. Fixes Dirks File browser problem seg fault with bat.
1131 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1132 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1135 kes Implement PopUp YES/NO dialog for bat.
1137 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1139 kes Correct RunScript to terminate job in FD on failure.
1140 kes Change abort_on_error and AbortJobOnError to fail_on_error
1141 and FailJobOnError in RunScripts.
1142 kes Minor tweaks of code formating in RunScripts, principally to
1143 avoid depassing 80 columns.
1145 kes Eliminate one #ifdef Win32 in bsmtp
1146 kes Implement grow tool to grow a file for testing very large databases.
1147 kes Add big-vol-test to test Bacula seeking with > 5GB.
1150 kes Modify find_next_volume() to return all values in Media record.
1151 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1155 kes Update Release notes
1157 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1158 Warning, in previous beta version, all media get from scratch keep their
1161 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1162 This should fix bug #842. Made a note to look at removing the temp
1163 files at the end of the install.
1164 kes Add ability to mount and unmount a file device providing it is
1165 marked as being removable and has the appropriate mount and unmount
1166 commands defined in the Device resource. This fixes bug #830.
1167 kes When applying a storage override, release all previous storage
1168 definitions rather than just prepending the new storage.
1169 This should prevent a good deal of confusion.
1171 kes Implement ./configure search for qwt libraries.
1173 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1174 Win32 FD. This should fix bug #893.
1175 kes Remove an unnecessary beep in Win32 init code.
1176 kes Update copyright dates in Win32 executable about boxes.
1177 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1178 code with a BSD getopt.c and getopt.h.
1179 kes Remove sched.h from the Win32 compat directory -- not used.
1180 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1181 need to shut it down, do it through the services panel or the command
1183 kes Remove some inappropriate Bacula FSFE copyrights.
1184 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1185 kes Fix regress config non-portable test as pointed out by
1186 Florian Heigl <florian.heigl@gmail.com>
1187 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1188 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1190 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1191 Reported by Frank Sweetser.
1195 kes Fix client-only build.
1196 kes Integrate client-only fixes for bsys (initgroups) and conio from
1197 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1198 kes Make arguments to get_scratch_volume() in same order as other
1200 kes Rework the prune_volumes() subroutine so that after purging and
1201 no volume found in desired pool, it will check for a scratch
1202 volume. This prevents recycling the whole scratch pool.
1203 kes Add code to status storage to print boffset_t (largefile support).
1205 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1206 kes You now need a --with-qwt=<dir> to be able to build bat.
1207 kes Update src/win32/cats/bacula_cats.def to include the new
1208 db_get_query_dbids() call on Win32.
1210 kes Correct a problem when selecting a scratch volume and moving
1211 it to another pool that lost some columns.
1212 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1213 kes Enhance Autochanger error messages to include Volume and device name.
1214 kes Rework prune_volumes() code to take account of InChanger flag,
1215 and to handle recycling volumes going to the Scratch pool and
1216 current pool because the RecyclePool directive.
1217 kes Implement a better and more efficient db_get_query_dbids() to
1218 handle creating and passing back a list of DBIds.
1222 kes Start work on new more efficient DBId subroutine. First use
1223 will be for recycling volume to Scratch inchanger.
1224 kes Increase number of JobIds in pruning from 1000 to 10000.
1225 This to be replaced by above routine.
1226 kes Begin implementation of building Qt4 on Win32.
1227 kes Correct typo in fix I added for bad TLS shutdown.
1228 kes Pull 2.0.3 patches into patches directory.
1229 kes Update Release notes. Include qt-console in line count.
1230 kes Update Projects file.
1232 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1233 bug in migration code where a job that spanned two volumes
1236 kes Implement new BST_DESPOOLING blocked state. Change from locking
1237 during despooling in SD to blocking. This means that other threads
1238 can work with the device structure, in particular the reservations
1239 system while despooling.
1241 kes Fix return in reservation message queue that missed clearing
1242 the jcr lock (implemented 26Jun07 below).
1243 kes Rename a number of dev methods to make locking function names
1245 kes Document locking in lock.c. Move lock structures to new file
1248 kes Move reservations message lock to lock jcr only this
1250 kes Move main SD locking code into lock.c (new file).
1251 kes Update Win32 build to include lock.c
1255 kes Dirk committed the qwt library code for drawing graphs in bat.
1256 kes Tweak install of qwt so that it is integrated with ./configure.
1258 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1259 out by Eric (my typo).
1260 ebl Fix configure.in to get batch mode enable
1261 kes Return correct string from authenticate.cpp in bat when connecting
1263 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1264 spurious line drops when using TLS.
1265 kes Do not file reparse points when restoring a file that already
1268 kes Implement Windows reparse points -- similar to directories, but
1269 we do not descend into it. This is a first cut. They seem to
1270 be backed up, but restore is not yet tested.
1271 kes Remove restore_blocking in tls code when shutting a socket to leave
1272 it in blocking mode. Hopefully this will fix the encryption bug
1273 reported by Frank Sweetser.
1274 kes When opening a file for backup, tell the OS that we are going to
1275 read it sequentially -- optimization.
1276 kes Change variable names in authenticate_director() to not conflict
1277 with member names in bat. Caused great confusion with compiler,
1280 kes Queue openssl error messages in case of comm problem.
1281 kes Do shutdown() call if socket terminated.
1282 kes Remove some duplicated code in tls.c
1283 kes Move more of the bsock member variables into private and access
1285 kes Add Frank Sweetser's tls-test to the regression suite.
1287 kes Add Swedish sv.po file
1289 kes Don't print clock skew message in FD if less than 3 seconds diff.
1290 kes Add a bit of VSS info to status client.
1291 kes Implement a first cut of Vista VSS, using Win2003 code.
1293 Release: 2.1.20 beta
1295 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1296 loaded tape but uses first drive).
1297 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1298 This was indeed a Win32 issue.
1300 kes Simplify search of autochanger for in-use Volume.
1301 kes Fix exit condition of check for in-use volume. kes Remove
1302 inappropriate my_postgresql_free_result() in db_close()
1304 kes Fix bad return in FD when encryption signature not found.
1305 Probably caused a crash.
1306 kes Inhibit missing encryption signature error messages for
1307 file types where no signature computed.
1308 kes Correct inverted check on autochanger in reservation system.
1309 kes Tweak debug code in autochanger reservation.
1311 kes Add some additional locking in the cats directory in subroutines
1312 that modify packet variables called from batch insert.
1313 kes Rework how dcrs are allocated. new_dcr() can now be called
1314 with an existing pointer, and it will simply clean it up.
1315 This allows the reservation system to test various different
1316 devices, and will permit easy device changes.
1317 kes A bunch of changes all over to handle new new_dcr() calling
1319 kes Work more on the Volume management in the SD. Remember Volumes
1320 for tape drives and for autochangers (even virtual disk changers).
1321 kes When looking at the Volume list to reserve a drive, handle
1322 autochanger names correctly by interating through the changer
1323 devices. Also call the Director to see if a Volume is suitable
1324 for the current job.
1325 kes Fix some bugs in bscan. Make sure all media records are written.
1326 Make sure that valid JobMedia records are written for disk files.
1327 Previously they were completely wrong.
1328 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1329 that the URLs don't change and so that the developers will all
1330 work off the same copy. Rebuild from scrach.
1331 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1333 Release: 2.1.18 beta
1335 kes Fix seg fault in FD from incorrect digest size.
1336 kes Fix argument to non-OpenSSL crypto.c subroutine.
1338 Release: 2.1.16 beta
1340 kes Remove a few malloc()s from the encryption code.
1341 kes Use the class calls to bsock in filed/backup.c and restore.c in
1342 place of the old bnet_xxx code.
1343 kes Implement code that does an on the fly calculation of the
1344 signing digest during restore of encrypted files. It makes
1345 a best guess at the algorithm, and if it is not correct, will
1346 then revert to the old code which reads the file after it is
1348 kes Implement at least one missing crypto stream in stream_to_ascii()
1349 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1350 #877 where a reload with bad syntax causes Dir to exit.
1352 Cut: 2.1.14 beta (not released)
1354 kes Do not free a volume on a tape drive until another volume is
1355 mounted and read, or the autochanger unloads the volume.
1356 This should help the SD re-use volumes that are already mounted,
1357 and should fix bug #886.
1358 kes Apply patch from user brettedgar that allows gnome2-console include
1359 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1360 kes Apply patch from Lucien Weller that fixes day of week calculation
1361 because of DST flag problem. Fixes bug #887.
1363 kes Move find_next_appendable_volume() to after acquiring a valid device
1364 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1366 kes Unable to reproduce bug 872. However added additional testing for
1368 kes Bug #874 resolved by documenting SQLite limitations.
1369 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1370 kes Bug #881 resolved by removing typo in mtx-changer script.
1371 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1372 approval. Added a link to the wiki on the web page, and implemented
1373 a backup from http://paramount.ind.wpi.edu
1375 kes Fix update allfrompool to pass pool name.
1377 kes Convert to pure GPL v2 license.
1378 kes Fix sscanf problems reported by Peter Buschman that caused
1379 a bus error on Solaris.
1380 kes Rework (simplify) the select prompt in bat.
1381 kes Move get_jobid_from_tid() into lib and create a
1383 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1384 should definitely fix the problem of lost error messages in the
1386 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1387 kes Eliminate tcpd.h from the project. Enclose the #include from the
1388 library with extern C ...
1389 kes Add print of signal name when a signal is trapped.
1391 Release: 2.1.12 beta
1393 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1395 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1396 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1397 makes SQLit3 run 30 times faster, though a bit less safe.
1398 kes Implement --with-batch-insert in configure and detection of thread
1399 safe libraries. It is on by default, but turned off if no thread
1400 safe library (e.g. SQLite 2) is available.
1402 kes Fix Bacula PostgreSQL buffer overruns.
1403 kes Do better checking for NULL results returned from PostgreSQL;
1404 implement retry for failed queries; clear results buffer after
1405 failed query. Hopefully this will correct the PostgreSQL failures.
1407 kes Implement algorithm to handle only one appendable volume with
1408 Prefer Mounted Volumes = no.
1409 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1410 returned from a query.
1411 kes Make volume lock recursive.
1412 kes Implement an additional volume reservation algorithm that
1413 starts by considering all reserved volumes then uses the
1414 old brute force algorithm of searching the resources to
1415 find a suitable device.
1416 kes Add new reservations debug code and refine the old code.
1417 kes Update the win32/dll/bacula.defs file.
1419 kes Tweak reservations algorithm to permit a few more cases, i.e.
1420 volume reserved, but on different drive, ...
1421 kes Enhance SD status to include Pool and Media Type for drive in a
1422 more readable format (a bit longer).
1423 kes Fix PostgreSQL double free.
1425 kes Minor refactoring of restore decryption code.
1426 kes Add code to smartall.c to detect double free of a buffer.
1428 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1429 so that bsmtp will create a correct email address (mailbox only).
1430 kes Modify 'memory' command so that the buffers are listed as 'In use'
1431 to avoid confusion with Orphaned buffers.
1432 kes I reworked the OpenSSL include/lib flags to be handled in
1433 the standard Bacula way, which should fix bug #863 concerning
1434 non-standard OpenSSL libraries.
1436 kes Implement Help Browser window for bat.
1437 kes Fix reload bug that reset StorageId to zero.
1439 kes Fix TLS #ifdefing when TLS turned off.
1440 kes Ensure that when labelling a tape with Slot=0 that InChanger
1442 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1444 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1445 add DISTINCT (required by PostgreSQL).
1446 kes Implement BSOCK authenticate_director() method. Eventually will
1447 authenicate all daemons.
1448 kes Move several more functions into the BSOCK class.
1450 kes Add code to tell the OS that we no longer need a cached
1451 file that we were reading. In findlib/bfile.c. Also,
1452 only cache files that we are reading. Thanks to
1453 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1454 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1455 kes Implement script to automatically generate cats and dll .def
1456 files for Win32 dll.
1457 kes Update README.mingw32 to include new .def file generation.
1458 kes Correct typo in UTF-8 error message as reported by:
1459 jhernandez <julianhernandez@gmail.com>
1460 kes Add additional sm_check() code on debug level 1.
1461 kes Set default debug level to 1.
1462 kes Trap SIGABRT in attempt to get traceback.
1464 kes Reduce bat connect timeout from 30 to 15 seconds.
1465 kes More restructuring and implementing BSOCK class in place of
1467 kes Remove a few unnecessary malloc() tests in crypto code.
1468 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1469 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1470 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1472 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1474 kes Fix Verify InitCatalog. The attributes were not pointing to the
1475 correct saved location.
1476 kes Implement message callback so that GUI is sure to get all
1477 daemon messages. Currently displayed in a dialog in bat.
1478 kes Ignore SIGUSR2 (Bacula timer) in bat.
1479 kes Apply regress patch from bug #859 to allow regress to work
1480 with Solaris compiler.
1482 kes Begin adding TLS support to bat.
1483 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1484 clean up lex.c and make it more readable.
1486 kes Move more bnet functions into the BSOCK class.
1487 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1488 kes Complete change of berrno strerror() method to bstrerror()
1490 Release: 2.1.10 beta
1492 kes Cleanup incorrect email addresses in bsmtp.
1493 kes Make bat display initial messages rather than discard them.
1495 kes First cut of adding .mod to the run command.
1496 kes Implement auto display of messages in bat.
1497 kes Enhanced preferences to allow all Bacula output to be
1500 kes Try to make bsmtp date routines more generic.
1501 kes Fixed bug #856 autochanger documentation.
1502 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1503 kes Add new cats entry point so Win32 builds.
1505 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1507 kes Do better checking for the MySQL 64 bit libraries looking for both
1508 .a and .so libraries.
1509 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1510 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1511 kes Require the thread safe version of MySQL during configure. Thanks
1512 to Andre Noll for pointing this out.
1513 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1514 continuing in migration code.
1515 kes Apply implementation of tray-monitor font derived from gnome-console
1516 submitted by Andreas Piesk <a.piesk@gmx.net>
1518 kes Eliminate important memory loss in SQLite
1519 kes Fixed the batch insert MySQL thread specific data that was not
1520 being freed. See cats/mysql.c:db_thread_cleanup().
1521 kes Fix restore before command.
1522 kes Convert old hdr.name to name() in a few places.
1523 kes Implement update jobid command.
1524 kes Return all time_t dates in db_get_job_record()
1525 kes Stop watchdog in SD earlier.
1526 kes Put Pool just after Storage in please mount message.
1527 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1530 kes Update the po files.
1531 kes Fix Verify InitCatalog by making it cache attributes.
1533 kes Change name bacula-bat to bat for man 1 page to correspond to
1535 kes Check for client and store NULL pointers in status command. This
1537 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1538 kes Fix sign extended editing of %p.
1539 kes Clean out a little old #ifdefing in cats/mysql.c
1541 kes If time diff between DIR and FD is more than 600 seconds convert
1542 INFO message to WARNING.
1543 kes Implement heap size display in status for all daemons.
1544 kes Attempt to fix MySQL db open memory loss (not successfull).
1545 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1546 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1547 Query. This looks like a MySQL but but by doing extra releases,
1548 the memory goes away. This should fix bug #847.
1550 kes When backup fails, cancel SD before waiting for sd termination.
1551 kes If SD is waiting for FD to connect during cancel, wake up the
1553 kes Fix fsf code so that errno is correctly reported.
1554 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1556 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1557 so that Bacula doesn't later stumble into a seg fault.
1558 kes Use the term Restore Client in the restore Job report.
1559 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1560 the original job's FileSetId.
1561 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1562 spooling in migration jobs. Not yet tested.
1563 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1564 reading conf file from a pipe. However, do it with open_bpipe()
1565 rather than popen. Not yet tested.
1567 kes Fix an ugly bug where the VolCatBytes were getting updated
1569 kes Implement bconsole memory command that prints current memory
1570 usage, plus smartalloc dump.
1571 kes Clarify some error messages in backup, admin, and migrate.
1572 kes Shrink label dialog to smaller size.
1573 kes Invert Cancel OK buttons on restore to be OK Cancel.
1574 kes More strerror() to bstrerror() conversions.
1576 kes Start implementing bstrerror() in place of strerror().
1577 kes Stripping path -- seems to work.
1579 kes Prevent door and port files from being restored (mostly
1581 kes Free an unreleased buffer in compat code.
1582 kes Change console Job name from *Console* to -Console- to eliminate
1583 Win32 filename problems. Put Win32 path separator when creating
1584 Console file. This fixes bug #846.
1585 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1587 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1589 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1590 to force Win32 error message.
1592 kes First cut strip path. The data should be passed to the FD,
1593 but nothing is done with it yet.
1594 kes Enhance the digest and signature routines in the crypto
1595 library to accept a JCR and to use it to print error messages
1596 so that they will go in the Job report rather than the daemon's
1598 kes Simplify some of the verify signature code.
1599 kes Simplify a few of the alternative returns in the signature
1602 ebl Use only POSIX regex instead of GNU regex in breg.c for
1603 File relocation. It fix broken freebsd compilation.
1604 kes Convert all other Dir files to use new ua class message
1606 kes Tentative fix for missing digest signature in bug 807.
1607 kes Correct handle problem in new win32_ftruncate routine.
1608 kes Convert ua_purge.c and ua_update.c to use new ua class
1609 message routines for bat.
1611 kes Correct incorrect installation of LICENSE in Win32 installer.
1612 kes Display LICENSE at the beginning of the Win32 install.
1613 kes Attempt to correct the need for the png files to be installed
1615 kes Reapply my bat.conf install script in qt-console. I think I
1616 editted bat.pro instead of bat.pro.in and it was lost.
1617 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1618 the /var/lock/subsys for subsysdir. Also corrects typos in the
1621 kes First cut update job.
1622 kes Correct configure to include qmake of src/qt-console directory.
1624 kes Make restore job yes/mod/no print in one command so GUI works.
1625 kes First cut implementing backup and restore client.
1626 kes Correct editing in Verify output that caused a seg fault.
1628 kes Insure that bat.conf is not overwritten during installation.
1629 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1630 while I was implementing migration in March 2006 !
1632 ebl Cleanup file relocation, using char *RegexWhere instead of
1633 char *where + bool where_use_regexp
1634 kes Update some manpages and add bat manpage.
1635 kes Make a first cut at converting bacula.spec.in for bwx-console
1637 kes Apply patch from John Goerzen to add hostname as fourth argument
1638 to make_catalog_backup script.
1639 kes Fix typos I introduced into bsmtp.c
1640 kes Make pm_strxxx() routines handle input of NULL pointer. This
1641 is to protect from NULL pointers returned from SQL databases.
1642 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1643 kes Add more debug to FIFO code -- fix fifo regression test.
1645 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1646 kes Add thread timer to bnet_connect() to break from OS if wait time
1649 kes Update Win32 build to include new files, new symbols, and
1651 kes Implement socket level heartbeat (tcp_keepidle)
1652 ebl Commit File relocation patch
1653 kes Make bat have 'make install' target.
1654 kes Warn during install if old gnome-console binary found.
1655 kes Warn during install if old wx-console binary found.
1656 kes Add -8 option to bsmtp command line to add content type utf-8.
1657 Fixes bug #809. (Character coding problem in bsmtp).
1658 kes If < is found in target (from, to, cc) then do not enclose the
1659 target in < > in bsmtp. Fixes bug #772 (malformed address).
1660 kes When printing certain items in dbcheck, stop after 300000.
1661 Fixes bug #822. (dbcheck loops).
1662 kes Incorrect status in Dir after waiting for mount with poll set.
1665 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1667 kes Print waiting to reserve a device every 5 mins.
1669 kes Don't call close_part in label.c if tape and relabel.
1670 kes Don't free volume if busy in close() -- should help with
1672 ebl Fix #824 RunScript bug (After script could be execute twice)
1673 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1674 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1675 Add a regression script to test RunScript
1677 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1680 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1681 deprecated. No additional bugs will be fixed, and they will be dropped
1682 in a future release (probably 2.4.0).
1683 kes Change name of wx-console to bwx-console to make it more Bacula
1685 kes Change the name of gnome-console to bgnome-console to make it
1688 kes Some time in March, a Feature Request with patch from Jorj Bauer
1689 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1691 The ability for the director to validate a Client (FD) CN against
1692 an arbitrary set of patterns rather than the hostname, with
1693 A new 'TLS Allowed CN' set of directives which are implemented
1694 in the Client resource. Then pattern matching is used in place
1695 of hostname matching against the Certificate's CN. As an example, we
1696 have certificates which (a) use a local CA, and (b) have a CN of the
1698 kes Add new/changed entry points to Win32 build
1699 kes Create unaccepted-projects for projects that are not accepted.
1700 kes Simplify locking in the reservations system.
1701 kes Add more debug code in reservations.
1702 kes Make sure error condition on reserving a volume is handled correctly.
1703 kes Correct handling of volume_in_use.
1704 kes Correct handling of initializing a device.
1705 kes Move handling of broadcasting releasing a device into release_device().
1706 kes Correct attaching dcr to dev so that it is only done if device
1707 is properly initiated.
1709 kes Locking debug level tweaks in SD.
1710 kes Tweak new Volume code.
1712 kes Add exec external-command [wait-seconds] to bconsole. This
1713 executes the external-command. Note! normally external-command
1714 should be enclosed in double quotes.
1715 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1716 it should normally be off in a production system.
1718 kes Implement die command for SD so that we can force it to dump.
1719 kes Implement SD lock debug code.
1720 kes Implement new algorithm for keeping Volume list in SD. It
1721 is now owned by the device.
1723 kes Implement new code for freeing in use volumes that should
1724 resolve if not all, some of the problems of multiple drive
1725 tape conflicts described in bug 801.
1727 kes Fix gui/bacula-web/images files in svn.
1728 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1730 ebl Fix a bug in batch mode (in string escape)
1731 kes Correct migration prune SQL typo that crept in in a
1732 recent 2.1.x change.
1734 kes Move bnet_despool() into class in bsock.c
1735 kes Modify job report to include director name and Build OS.
1736 kes Move drop root privilege and check_catalog() before fork.
1737 kes Add update database scripts (version 9 to 10) to updatedb directory.
1739 ebl Check size and age of each file after its backup to see if
1740 it has changed during backup, if 'checkfilechanges' is set.
1741 The FD will do an extra check (stat(2)) after
1742 each file backup. mtime, ctime and size are compared with
1743 'before backup' information. If time or size mismatch, an
1744 error message will be generated. You must upgrade FD to use it.
1746 kes Make database name and user configurable
1747 --with-db-name=xxx --with-db-user=xxx
1748 kes Add back database type to message.c for debugging.
1750 kes Implement dir_sql() which issues an SQL query.
1751 kes Modify bat medialist to use dir_sql() and do some minor C++
1752 formatting as well as eliminating a number of pointers, simplifing
1755 kes Fix some of the mtx-changer grep commands for tape label readers.
1756 kes Convert a number of bsendmsg into the appropriate send/warning/error
1757 message class calls.
1758 kes Suppress the using database message in the .sql command.
1759 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1761 kes Add context menu for floating a window.
1762 kes Some minor cleanup and name changes in qt-console
1763 kes Add doing mt setblk 0 in Win32 mtx-changer.
1764 kes Apply Martin's bug fix to move definition of ENODATA for
1766 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1767 sqlite2 and sqlite3.
1769 kes More pruning cleanup.
1770 kes Turn on wait_for_drive by default in mtx-changer.
1771 kes Turn on Batch insert code by default as it now passes regression.
1772 kes Add ./configure --enable-bat to enable building of Bat.
1773 No install yet though.
1775 kes Implement a new .sql command for bat.
1776 kes Implement code to turn off pruning in obtaining the next volume.
1777 Pruning is turned off for the status dir command, but turned on
1778 for SD requests and for the list nextvolume command.
1780 kes Correct Qmsg() that was not updated correctly when committing a
1781 previous change (probably the recent TLS patch).
1783 kes Write new subroutine is_volume_purged() that explicitly checks
1784 if the Volume is purged, and if so marks it as such. This should
1785 resolve problems reported about needing to mount twice to recycle
1787 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1788 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1789 amount of duplicated code.
1790 kes Do volume pruning only for the Media Type desired (reduces pruning time
1791 if multiple Media Types are in the same pool).
1792 kes Implement more detailed info in the Job report for the Bacula version
1794 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1796 ebl Add bbatch tool to bench database and insert mode.
1797 Fix sql quote stuff in batch mode
1798 Fix sql stuff for mysql
1800 kes Correct problems with am/pm scheduling. Fixes bug #808.
1801 kes Implement new prunning code that prunes up to 1000 jobs at
1802 the same time. The same technique can be applied to a number
1803 of other prune/purge subroutines.
1804 kes Add an insanity check when starting a new tape job to ensure
1805 that the tape position has not been changed. If so fail the
1807 kes Fix Win32 build for dlls to add the folllowing:
1808 src/lib/bsock.c -- new file with new entry points
1809 src/lib/dlist.c -- new entry points
1810 src/cats/sql_create.c -- new entry point
1811 src/cats/sql_cmds.c -- new DATA item exported
1813 ebl batch mode cleanup bscan-test is ok now.
1814 kes Implement SD code to check length of disk volume before appending.
1816 kes Correct return status on db_batch... routines.
1817 kes Add call to db_write_batch_file_records() to migration code.
1818 ebl Fix AfterJob timing
1819 kes Move the checking of the database in initializion of the Director
1820 to after we drop privileges. This avoids the need for both root
1821 and bacula access to the DB.
1822 kes Correct a misplaced variable definition in src/filed/backup.c
1823 kes Correct how the new batch insert db_create_attributes_record()
1824 uses the arguments. Caused a seg fault in bscan.
1825 kes Implement lock() and unlock() methods in DEVICE class.
1826 Implement block() and set_block(xx) methods in DEVICE class.
1827 kes Modify bnet_connect() so that it uses time() to check for the
1828 wait time expiring (on some OSes, some system calls may not
1829 return immediately).
1830 kes Modify Verify to obtain the previous JobId when it is actually
1831 running rather than at schedule time (as it was in 1.38.x).
1832 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1834 kes When checking pid in pid file, continue running if the pid is
1835 the same as ours. This occurs on IRIX after a system crash.
1838 kes Extend new GUI API.
1839 kes Make the ua structure a class, and implement send_msg(),
1840 error_msg(), warning_msg(), and info_msg().
1842 kes Apply fix from for building wx-console on the Mac from
1844 kes Implement new select mechanism for GUI programs.
1845 kes Reorganize initialization of stackedWidgets in bat.
1847 kes Add updated nagios plugin supplied by Christian Masopust.
1849 kes More bat implementation.
1850 kes File migrate bug with Pool Occupancy using mediaid instead
1851 of jobids. Fixes bug #795.
1852 kes Fix orphaned buffers in filed backup and verify due to
1853 crypto buffers not freed during errors. Fixes bug #789.
1854 kes Extend new GUI api code to tree commands.
1855 kes Ensure that tree and dot commands check console ACLs.
1856 kes Permit marking directory with trailing slash.
1857 kes Allow 20 console connections (instead of only 10).
1859 kes Add smartctl call to bacula-sd.conf as an example of getting
1862 kes Modify jobq.c to let simultaneous restore jobs run. This may
1863 cause them to fail if they cannot get a drive.
1864 kes Add Client Connect Wait to Storage daemon to permit users to
1865 modify the time the SD waits for a FD connection.
1867 kes Correct virtual changer check which was backwards. This caused
1868 volumes to be unloaded into slots already occupied.
1870 kes Apply Command ACL filter to JobId list in restore command.
1871 kes Correct typeo in var.c patch.
1873 kes Don't let Bacula prune File or Job records for the current Job.
1874 kes Fix variable substitution pad + inc bug reported (with patch)
1877 kes Correct SQLite log table index as reported by Luca Berra.
1879 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1881 kes Begin implementing new comm signals for API.
1882 kes Fix a few places in lib/message.c where the open fd may
1884 kes Continue implementing lib/bsock.c (real class). Make jcr,
1885 who, host, and port private. There are new methods to access
1886 them for non-class use. This required touching a number of files.
1888 kes Add LANG=C to autoconf/randpass so it works with languages other
1889 than English. Fixes bug #788.
1891 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1893 You will not be able to generate Include/Exclude list any more.
1894 It will be fixed soon.
1895 If you want to use this, you can apply
1896 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1898 kes Restore of sockets created false error messages because Bacula
1899 no longer restores sockets, but the code was still trying to
1900 set the attributes on a non-existent file. Reported by a user.
1901 ebl finish RecyclePool feature
1902 Media will takes Pool.RecyclePool
1903 when moving from Scratch to a Pool or when user will do
1904 update volume=xxx frompool
1905 To use it, add RecyclePool = aPool to your Pool resource
1908 RecyclePool = Scratch
1912 kes Expand new BSOCK class adding signal() and new BNET signals.
1913 kes Begin enhancing the dot commands adding a new API function
1914 that returns more information and will make it easier
1915 to interface to the Director from a program.
1917 kes Make DEVICE fd private. Its new name is m_fd, and can be
1918 obtained with dev->fd() outside the class. This is the
1919 first of many DEVICE members to be made private.
1920 kes Implement Michael Renner's idea on having a virtual disk
1921 changer. I made some minor modifications (e.g. I did not
1922 implement the Virtual Changer directive, but simply set
1923 the Changer Command to an empty string.
1925 kes Implement a BSOCK send() method that writes the whole record
1926 in a single write() request rather than in two.
1927 ebl add update volume=xxx recyclepool=yyyy
1928 volume takes recyclepool from pool when using update volume=xxx from pool
1930 kes Fix encryption deblocking bug, which caused some restored files
1931 to be truncated. This fixes bug #763.
1932 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1933 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1935 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1936 ebl Use btime_t instead of uint64_t in media patch.
1938 kes Optimize the use of the database a bit in the Status dir command.
1939 Only open it when needed, ensure that if any previous database
1940 was opened, it is closed.
1942 kes Correct VolCatBytes bug from media patch.
1943 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1944 in the case of orphaned records.
1945 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1946 and File records in 300K chunks to be more efficient. This
1947 idea came from Juan Luis Frances (if I remember right).
1948 kes Apply Eric's scratch patch that moves a purged Volume to
1949 the RecyclePool. Question: how is RecyclePool set? what
1950 happens to the ScratchPool?
1951 kes Apply Eric's media patch that collects read/write media
1952 times as well as byte counts. This patch requires a
1953 simultaneous upgrade of the DIR and SD. Note, there
1954 should be some way to turn off timing. I'm not sure
1955 times are in Bacula units.
1956 kes Apply Eric's batch-insert patch.
1958 kes Update projects list.
1960 kes Implement Include/Exclude file lists in FD as dlists using
1961 the new dlistString class. This permits efficiently having
1962 large include/exclude lists and completes project Item 25.
1963 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1964 console is authorized to cancel the job. This fixes bug
1966 kes Modify SD so that the VolCatJobs medium record is updated
1967 at the beginning of a Job rather than the end. This
1968 fixes bug #775 where exceeding MaxVolJobs caused jobs
1970 kes Added a mutex around getting and setting Volume information
1971 so that multiple simultaneous jobs will single thread.
1973 Switch to using Subversion
1974 kes Remove src/pygtk-console/ from configure
1976 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1977 plus the entrypoints.
1978 kes Apply patch supplied that corrects debug print
1979 in canceling jobs for max run time. Supplied as
1980 part of bug #621, which was previously fixed.
1982 kes Test on job_canceled() and sd_msg_thread_done inside
1983 loop starting the message thread to avoid a race condition.
1985 kes Remove rl_catch_signal from console.c as it conflicted
1986 with the header definition. Fixes bug #765.
1987 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1989 kes Clarify some stored/acquire messages to indicate if the
1990 problem is with read or append.
1992 kes Fix memory leak with storage ids in cats/sql_get.c
1993 kes Terminate watchdog earlier to avoid reference to released
1994 memory -- reported by Jason Austin.
1995 kes Move closing the database from jobq.c to the director daemon
1996 termination routine. This fixes memory leaks for shadow jobs
1997 (i.e. migration jobs).
1998 kes Free up the unique jobid chain items in migrate.c. This fixes
1999 a memory leak problem.
2000 kes Convert some ugly looking for statements to use foreach_alist
2001 in findlib/find.c. This will facilitate converting the structures
2002 to use dlist (for large include/exclude lists).
2003 kes Fix a bug in the btree.c and btree.h routines, then rename them
2004 rblist and add them to be built in src/lib. Include some new
2005 methods written by Rudolf Cejka that make the code more readable
2006 (hides some of the ugly casting).
2007 kes Add set_next() and set_prev() methods which make the code much more
2008 readable. Also add a new dlistString class that facilitates storing
2009 strings in dlists. To be used in the large include/exclude lists.
2010 kes Make some trivial modifications to lib/tree.h that use rblist
2011 rather than dlist for storing the tree links. This was suggested
2012 by Rudolf Cejka. The result of this is that the restore tree now
2013 uses red-black binary trees rather than simple linked lists. This
2014 should give rather dramatic speed improvements for directories
2015 contining large numbers of directories/files (more than 10000).
2017 kes Fix maxruntime bug #621.
2019 ebl Implement the include JobID in spool file name project.
2020 kes Reorder projects file in order determined by Jan 2007 vote.
2021 kes Implement item #12 on project list -- quick release of FD by
2023 kes Fix open of SQLite3 db where user does not have write permission
2024 so that DIR does not crash. Fixes bug #761.
2026 kes Add back missing @ in Win32 Makefile.
2027 kes Change 'Device not configured to autolabel' from INFO
2029 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2030 which should restart an indefinite # of times.
2031 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2032 other DIR specifications.
2034 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2035 Fix path quoting in SQLite scripts.
2036 Fix problems with SHGetFolderPath.
2038 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2040 kes Fix Job restart on error bug that promotes an Inc to a Full
2041 backup. This should fix bug #755.
2042 kes Add qt-console and first cut of code.
2046 kes Fix Bacula->Documentation link on Win32 to point to index.html
2047 instead of bacula.html. Fixed bug #750.
2048 kes Return JobId in db_get_job_record() when JobId==0. This should
2050 kes Do not release source pointers when restarting a failed job.
2052 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2053 This *should* fix bug #747.
2054 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2057 kes Modify USTORE constructor to set an empty store_source string,
2058 and don't copy the store_source string in a cancel. Hopefully
2059 this will fix Arno's seg fault, bug #744.
2060 kes Add back code to disable conio in configure. Fixes bug #743.
2061 kes Correct the Options scanner in the FD to correctly handle
2062 SHA1 option, which was eating the next option. Reported by
2064 kes Add code to indicate when the SD is spooling, spool wait, and
2065 despooling as requested by Alan Brown.
2067 Version 2.0.0 released: 4 January 2007