ebl Tweak compat.h for new mingw

[bacula/bacula] / bacula / technotes-2.5

              Technical notes on version 2.5

          
New features:
command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
examples/database/dbcheck.sql
enhancement to wait command: wait mount  ...
dbport in dbcheck
filepattern (restore with regex in bsr)
mixed priorities

General:
29Jan09
ebl  Tweak compat.h for new mingw
28Jan09
ebl  Add new ScratchPool directive to Pool. Thanks to Graham
ebl  Turn on db_get_file_list() single SQL because the failure
     was due to a full FS. And the accurate test fails with the
     other code.
27Jan09
ebl  Fix a bug that doesn't update RecyclePool all the time 
     during the first startup.
25Jan09
kes  Turn off db_get_file_list() giant SQL because if fails on
     my production machine.
kes  Fix bat.pro.in so that bat is properly installed rather
     than just copied.
24Jan09
kes  Modify search for .conf file so that if one is given on
     the command line, it will be used, otherwise it will use
     the SYSCONF directory.  It will no longer look in the current
     directory unless explicitly requested on the command line.
     This fixes bug #1189.
kes  Fail a job that references a plugin if no Plugin Directory is
     defined.
22Jan09
kes  Fix bug #1211 crash during reload with bad dird.conf file.
21Jan09
ebl  Add detection of intptr_t and uintptr_t to configure process
20Jan09
ebl  Change some cast to use intptr_t instead of long
18Jan09
kes  Apply acl_solaris_update.patch submitted by Marco (thanks).
kes  Remove configure check for resolv.h -- it is apparently not needed
     and causes build warnings on FreeBSD.
kes  Ensure that the installer and newinstaller Makefiles are called
     during a make clean.
12Jan09
kes  Apply Eric's fix for suppressing extended attributes error messages
     when dealing with deleted files.
11Jan09
kes  Add src/win32/newinstaller -- single file installer
kes  Attempt to explicitly call gmake when needed, or if not found
     skip the calls.  This should fix the FreeBSD regression/build.
10Jan09
kes  Fix bat.pro.in so that bat will install.
09Jan09
kes  Add more debug output to VSS init.
kes  Attempt to correct win32 debug in berrno.
09Jan09
kes  Fix bug reported by Dan where make fails in clean of src/win32. 
07Jan09
kes  Fix bug #1212, SD is unable to recycle purged volumes. fstat()
     was broken.
06Jan09
ebl  Despool attributes directly from the director if attribute
     spool file is present
Beta Release 2.5.28-b1
05Jan09
kes  Fix bat install broken by $DESTDIR change.
02Jan09
kes  Fix annoying compiler warnings in console/conio.c
kes  Fix win32 build (depended whether or not ./configure was run).
28Dec08
kes  Apply fix suggested by Bruno Friedmann to configure.in to
     find python2.5
26Dec08
kes  Turn on Eric's match_bsr tape block checking code.
kes  Correct values used for tape block numbers in record.c.
23Dec08
ebl  Fix a problem with PoolUncopiedJobs option which was broken
     by the new JT_JOB_COPY type.
kes  Fix bug #1206 -- Error: sql_update.c:194, which was probably
     caused by the user modifying the Bacula DB schema.
kes  Remove rogue line of C code.
kes  Fix bug #1208

Beta Release 2.5.16-b1
20Dec08
ebl  Work on copy jobs
     - Add "list copies" command
     - Add JT_JOB_COPY type for job copies
     - Don't allow copy jobs in automatic restore
     - Promote next copy job as backup when original job is deleted
kes  Closed bug #1207 -- 2.4.4-b1 strange volume/device handling
kes  Closed bug #1204 -- Undescriptive help options
kes  Closed bug #1202 -- Revise documentation
kes  Closed bug #1178 -- Bat 2.4.3 tries to double-purge volumes 
     unable to reproduce.
kes  Closed bug #1166. Fixed by Eric -- Problem canceling job if 
     client looses connection while being backed up.
kes  Fixed bug #1200 -- inconsistent auto purge documention
kes  Fix documentation for Recyling ambiguity. Fixes bug #1200.
kes  Remove old mmap code from compat.h/cpp
kes  Update ChangeLog
kes  Correct typo in Win32 Makefile editing
kes  Correct typos in debug output.
kes  Improved error detection in creating bsrs.
kes  Add debug code to Win32 restore
19Dec08
kes  Fix Win32 build.
ebl  Cleanup director VolParam struct
18Dec08
ebl  Replace File:Block in BSR by Address to fix #1190
16Dec08
kes  Correct missing return in Darwin code.
15Dec08
ebl  Copy joblog after a Copy job
14Dec08
kes  Tweak block.c read to more closely simulate write for computing
     block addresses and turn on disk block testing.
kes  Implement a crude 'list joblog' mostly for debugging.
13Dec08
kes  Fix Migration bug #1206 sql error with NULL FileSetId when no jobs
     to migrate.
kes  Fix Migration JobLog bug #1171. Get the JobIds correct.
12Dec08
ebl  Fix segfault in bscan when using debug mode
11Dec08
kes  Fix configure to do minimum Win32 configure so that make clean
     works.
kes  Tweak modify FD header to use %ld instead of %d.
kes  Remove hand scanning of FD header in SD and use Bacula's
     sscanf, which is now OS independent.
kes  Define new object (file/dir) begin and end Volume label records 
     in SD.
kes  Use new method of defining XATTR #defines to avoid need for having
     them in config.h.in
10Dec08
ebl  Rename all STREAM_ACL_..._T into STREAM_ACL_..
09Dec08
ebl  Add a new lock manager that can detect deadlock situation
     This new option is activated with a --enable-lockmgr configure
     option.
ebl  Add new Director->MaxConsoleConnections directive
03Dec08
ebl  Fix bacula-sd hanging after tape gets full + unload 
02Dec08
ebl  Remove extra db_lock() in get_prune_list_for_volume()
ebl  Apply 2.4.3-prune-deadlock.patch that fixes a problem when
     using Catalog as message backend.
01Dec08
kes  Apply Marco's Darwin xattr patches.
28Nov08
kes  Fix Win32 build.
26Nov08
kes  Apply Marco's Extended attribute support patch.
kes  Update projects file
25Nov08
kes  More changes to ensure that during thread switches the jcr
     is removed from the TSD.
kes  Ensure that consoles attach jcr to thread, and that only the
     thread attached is removed from the TSD.
24Nov08
kes  Move definition of FileId_t to bc_types and define it once in the jcr.
22Nov08
kes  Remove all time_t from arguments in favor of utime_t, which is
     machine independent.
kes  Add more debug to match_bsr.c and use %u for unsigned debug editing.
20Nov08
ebl  Apply patch for bug #1182  about Recycle flag
     that is not updated after a pool change.
kes  Since the user has been warned, allow console purge command 
     to purge volumes that are in use. This is a fix for bug
     #1191 before it was submitted.
kes  Fix Win32 build to add new sd_plugins.c
ebl  Apply patch from bug #1175 that reset the Slot and the Inchanger
     flag in db_make_inchanger_unique().
ebl  Remove a Emsg() after recieving a Fatal signal that can lock
     the catalog.
19Nov08
kes  Apply patch from bug #1187. It prints an error message if the
     Maximum Block Size in the SD is too big.  
kes  Increase Maximum Block Size to 2,000,000 bytes.
kes  Use doubly linked bsr list so that consumed bsrs may be
     removed.  Removing not yet implemented.
18Nov08
kes  Implement a fix that very likely fixes the undesired volume
     purge reported by Graham Keeling.
kes  Implement bsr block level checking for disk files. However,
     it does not work correctly in accurate tests, and all the
     migration and copy tests, so it is turned off.
ebl  Make SD plugins work.
14Nov08
ebl  Apply Riccardo's patch to compile bacula+mysql on mandriva
13Nov08
ebl  Add more variables accessible through the director plugin
     interface.
12Nov08
ebl  Do work on plugins
     - fix compilation of the director plugins
     - add plugin list to status dir output
     - add director plugin dump after a fatal signal
ebl  Apply Riccardo's patch that fix some win32 compilation errors 
     and a bug with bat version browser.
11Nov08
ebl  Add Plugin debug after a fatal signal.
ebl  Add db and rwlock debug after a fatal signal.
10Nov08
ebl  Fix maxwaittime to fit documentation, this time is now counted
     from the job start and group all wait periods.
ebl  Add tips for postgresql to improve performance when having
     multiple batch insert at the same time.
09Nov08
ebl  Remove extra debug for db lock.
07Nov08
kes  Apply Riccardo's second patch that cleans up the #include
     file order + a few Win32 particularities to make bat work
     on Win32.
ebl  Add allow_transactions flag to mysql db backend.
kes  Apply win32-fixes patch from Riccardo that makes the Win32
     bat more stable and faster (but still slow).
06Nov08
kes  Fix bug with job name duplication if more than 60 jobs created
     during a minute.
kes  Correct some bugs of cleanup in SD if the FD connection fails.
ebl  Add code to get more information after a fatal signal.
05Nov08
ebl  Apply Bastian's patch that add spooldata=yes|no option
     to run command.
04Nov08
ebl  Fix bash shell to sh shell in database creation script
02Nov08
kes  Fix orphaned jobs (possible deadlock) while pruning.
kes  Use jcr stored in bsock rather than searching in getmsg.c.
     This results in about a 5% speed improvement with four
     concurrent jobs.
kes  Implement win32_chmod that uses wide characters, if possible,
     to get and set the file attributes.
29Oct08
kes  Apply pane freezing during updates patch from Riccardo Ghetta.
kes  Rework next_vol and autoprune a bit due to failure in
     recycle-test.  prune_volumes() now returns no status,
     but should prune at least one Volume, if possible.
kes  Modify check_if_volume_valid_or_recyclable to reject a
     volume with Recycle set off.
kes  Modify prune_volumes() to continue if volume Recycle is off
     or if the volume has expired. Add more debug.
28Oct08
kes  Fix bug #1046 VolumeToCatalog incorrectly reports mounted 
     filesystems as missing on the Volume.
kes  Rewrite the set_jcr_job_status() code to include job status
     priorities so that more important status changes occur but
     lower priority status changes will not overwrite something
     more serious.  This could possibly cause reporting incorrect status
     reporting in some cases.  More testing is needed to ensure
     I have the right priorities. This vastly simplifies the previous
     contorted logic.
     Verify Diff status should now be correctly reported, whereas it
     was previously lost.
kes  Reduce some debug output.
kes  Apply Joao's patch to SQLite tables to make chars work.
27Oct08
ebl  Fix #1175 About update slots that don't reset InChanger flag when 
     slot is empty.
ebl  Fix #1173 where prune_volume() returns a volume from the scratch.
25Oct08
kes  Remove jobq.c constraint that read and write SD must be
     different. This may lead to more deadlocks in the SD,
     but they should be resolved there.
kes  Ensure that job report is always printed even if job is failed
     in the director.
kes  Don't print job report twice for failed VBackup jobs.
24Oct08
kes  Fix editing of retention time difference to use 64 bit
     int instead of 64 bit unsigned. This should permit very
     long retention periods.
kes  Implement code to prohibit a write job from appending to  a 
     Volume that will be used for a read operation.  This is
     new code and could possibly cause some conflicts.
23Oct08
kes  Integrate James Harper's Exchange Win32 plugin patch.
kes  Apply patch from Marco van Wieringen that implements the new
     Solaris libsec interface for ACLs so that Bacula can save and
     restore both the new ACLs and old ACLs.
kes  Marco's patch also corrects the file dependency generation code
     so that it works properly both with shared libraries and static
     libraries.
kes  Marco's patch also includes a small cleanup of the cats Makefile
     to remove some references to non-existent files.
22Oct08
kes  Modify win32 Makefiles to use full paths in most cases.
     In particular add MAINDIR environment variable that points
     to the main Bacula source directory.
21Oct08
kes  Add read volume list code to SD -- not yet used.
kes  Add James' binutils patch
kes  Split volume management code out of src/stored/reserve.c into
     a new file vol_mgr.c 
kes  Modify configure to do an automatic make clean.  This ensures
     that any changes to ./configure options are handled correctly.

Beta version 2.5.16 release:
20Oct08
ebl  Rename JobStat table to JobHistory
kes  Ensure that only normally terminated jobs are migrated.
19Oct08
kes  Add Makefile dependency when using LIBTOOL_LINK so that any
     change in ./configure options will be accounted for.
18Oct08
kes  Fix typo in the ACL patch that I overlooked.
kes  Apply Marco's libtool include patch.
17Oct08
kes  Apply Bastian Friedrich's ACL patch to eliminate ACL
     errors during restore.
kes  Minor cleanup of create_restore_volume_list() code.
kes  Fix typo in console Makefile.in
16Oct08
ebl  Fix #1110 about RunScript that can't execute a script with
     Unicode characters in the path.
15Oct08
kes  Apply tray-monitor patch from Bastian Friedrich to make it
     work with the new FD.
14Oct08
kes  Apply cleanup patch from Marco
kes  Apply patch from  Marco van Wieringen <mvw@planets.elm.net>
     that implements libtool to create shared objects out of
     the Bacula libraries.
kes  Fix tray-monitor so it will speak to new FD.
ebl  Fix bug with ANSI label when volume name length < 6
ebl  Fix segfault in debug level > 50 with btape.
ebl  Remove warning message in btape when command is empty.
kes  Fix Win32 build to pull in new BACULA define.
13Oct08
kes  Change IncludeDir to Exclude Dir Containing.
kes  Implement code to prohibit ExcludeDirContaining in an
     Exclude section (same for Plugin and Options).  A bit
     of a kludge with RES_ITEM2 ...
ebl  Add field to command list to restrict Runscript console
     command.
ebl  Use a separate JCR when running Console command with Runscript.
ebl  Permit to mark version as Beta in some outputs
11Oct08
kes  Add plugin types in jcr.h to reduce need to cast.
kes  Do better checking of plugin return values.
kes  Free plugin context after calling pluginFree() as
     requested by James.
kes  Allow plugin to call JobMessage with NULL context.
kes  Do not add plugin to global list if loadPlugin returns error.
kes  Rework plugin.h a bit to reduce dependence on Bacula.
10Oct08
kes  Move generation of bsr file for Virtual Backup to run section
     so that it is generated just before actually running.
     Suggested by Graham Keeling.
09Oct08
kes  Add malloc and free Bacula entry points for plugins. Increment
     FD plugin interface version. Create a Bacula plugin context 
     structure to keep track of whether or not the plugin is disabled.
kes  Apply FileIndex fix for plugin name stream suggested by James.
kes  List plugins in FD status report when debug > 0.
08Oct08
ebl  Add a new VerId variable that is printed in version command.
kes  Fix migration SQL not to migrate a job that has not terminated.
     This is a partial fix to bug #1164.
kes  Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
     backup start time bug reported by Graham Keeling.
08Oct08
ebl  Fix possible bug in cancel_job() with job that are not
     yet created.
07Oct08
kes  Fix bat build for Win32.
06Oct08
kes  Copy plugin link field into ffpkt.
05Oct08
kes  Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
     It provides FileRegex in bsr files and code to collect regex
     from the user during restore, an Allow Mixed Priorities feature,
     and documentation for the above.
ebl  Remove db Berkeley from configure process
kes  Do dirty check on hostname (Linux only) and if not resolvable
     use localhost as default.
kes  Increase vtape max block to 20GB.
04Oct08
kes  Refactor restore code to create a close_previous_stream(). This
     This may destabilize the source.
kes  Implement planned startRestoreFile() plugin call.
ebl  Remove missing Loaded information from status slots storage command.
ebl  Fix Console command problem that cancels the job
kes  Add more plugin restore debug code.
03Oct08
kes  Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
kes  Rewrite plugin restore interface a bit to correspond to how Bacula
     creates and writes to the restored file.
kes  Add some DebugMessage() calls to the bpipe-fd.c program.
30Sep08
kes  Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
     Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
     Bat; allow add and delete in place of mark and unmark.
kes  Another attempt to fix the endRestoreFile plugin bug noted below.
29Sep08
kes  Apply dbi driver patch from Joao.
kes  Correct a bug in passing the context to the endRestoreFile() plugin command.
     Bastien Friedrich reported the bug.
kes  Create plugin instance only when FD job starts.
kes  Add new FD plugin event: bEventCancelCommand when
     a cancel command is issued to the FD.
28Sep08
kes  Add cmd_plugin flag to jcr so we can globally know if a 
     command plugin is running.
kes  If command plugin running, do not attempt (for the moment)
     to get Win32 extended attributes.
kes  Ensure that proper Win32 flags are set in bfile packet
     if plugin_bopen() works on Win32.
kes  Remove generated src/plugins/fd/Makefile
27Sep08
kes  Implement build and install of bpipe-fd.so plugin.
kes  Rework the interface that passes packets to the plugin
     so that the packet is started and ended by the packet size.
     This allows the driver to do a sanity check.
26Sep08
kes  Rework the pluginIO Bacula internal code to enable   
     proper handling of Win32 error codes from GetLastError.
kes  Apply Joao's patch to regress startover_libdbi.
25Sep08
ebl  Add -B option to dbcheck to get catalog information
kes  Fix Win32 build to include new library function.
kes  Remove some old reader/writer code.
kes  Implement ./configure --with-plugindir=xxx
ebl  Fix the mysql bug in the new accurate code
kes  Improve plugin debug. Create plugin test.
kes  Set main thread specific data to INVALID because it
     has no jcr. This allows debug output to work correctly.
kes  Add src/plugins/fd/Makefile to ./configure process.
kes  Make first cut attempt to correct SQL that computes the current
     Pool usage.  This is to fix bug #1159.
kes  Do a bunch of plugin cleanups for Win32 and more careful checking
     of PluginDirectory and whether or not a plugin was found.
24Sep08
kes  This code should fix the race condition that leads to a Director
     crash at job end time when the job list is updated. This was reported
     in bug #1162.
kes  Add more plugin documentation and fix include of config.h for
     Win32 build (I hope).
22Sep08
ebl  Revert to htable instead of rblist
ebl  Cleanup accurate code (remove tcdbm parts) and use red/black
     tree instead of htable.
ebl  Use a dedicate DB link to compute and send the accurate list
     file to the client.
21Sep08
kes  Fix compile errors in filed/fd_plugin.c.
20Sep08
kes  Remove all double quotes from SQLite creating script and
     replace by single quotes as suggested by John Huttley.
18Sep08
kes  Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
     It significantly improves the performance of dbcheck for
     MySQL.
kes  Fix bad debug code call in src/filed/accurate.c
17Sep08
kes  Change two Jmsgs in accurate to Dmsg to reduce unnecessary
     output. Perhaps we really need to implement M_SAVED.
16Sep08
kes  Fix bug #1156 FD crash during processing of Accurate data.
kes  Tweaks to htable code to improved debugging and make names
     a bit more meaningful.
15Sep08
ebl  Remove time_t from update_stats()
14Sep08
kes  Modify the license of the example plugin program to allow
     it to be used by anyone for making a Bacula plugin.
kes  Make apply_rp_codes() in bpipe-fd.c be static.
13Sep08
kes  Remove Encryption and Accurate lines in vbackup output -- not used.
kes  Fix subtle bug in vbackup by not changing DEV_RECORD packet.
kes  Add host name to items printed during dump.
kes  Make Check File Changes default on.
11Sep08
kes  Set the default FD timeout to 3 minutes (previously 30).
kes  Apply Bastian Friedrich's weird spelling correction patch.
10Sep08
kes  Always print Verify hash differences. Rename variable to make the
     code slightly more readable.
09Sep08
kes  Correct tests for MaxFullInterval as reported by
     Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
kes  Fix MaxDiffInterval code as well.
kes  Enable Win32 plugin load code in lib.
kes  Make Verify code that computes disk checksums use the same
     algorithm as backup when dealing with sparse files.
kes  Attempt to run VSS on any systems newer than Vista -- should
     make it work on Windows Server 2008.
ebl  Change the new statistic implementation. Remove the UseStatistic
     directive and add a 'update stats [days=...]' command. You can
     now decide when copy job records from Job table to JobStat.
     Statistics are much more accurate with this.
08Sep08
kes  Fix SQL case problem that may cause the failure of DiskToCatalog
     in bug #1149.
kes  First cut adding SD plugins.
03Sep08
kes  Add Slot if it is non-zero to writing bsr file after a
     backup.
kes  Change a number of bnet_fsend() into class method calls.
kes  Begin audit of diff of 2.4 branch to trunk code.
01Sep08
ebl  Fix the mysql creation script that double-created an 
     index of the same field on the Media table.
     Add an index to on VolumeName to the Media table for mysql.
30Aug08
kes  Another try at fixing Vbackup. It looks much better this time.
     Disable file index sanity check in FD with value stored in
     attributes record because with Vbackup the File Index gets
     changed, but not the attributes record.
     Enhance some debug code.
     Fix handling of re-indexing records that are copied in Vbackup.
29Aug08
kes  Made level_to_str() know about Virtual backup.
kes  Set correct Virtual backup write pool.
kes  Fix compile warning in new dbcheck port code.
kes  Fix migration code broken by previous virtual backup fix.
28Aug08
kes  Fix problem of Virtual backup not writing a sequential FileIndex.
kes  Reset Virtual backup time/date to the value from the last backup.
kes  Ensure that storage name is passed to SD on read.
kes  Correct a problem with Level and Virtual backup, rework how
     bsrs are printed in debug to use standard routine.
kes  Apply patch from Chris in bug #1133 that provides alternate db port
     support for dbcheck.
ebl  Remove catalog dependency from bcopy tool.
ebl  Modify catalog scripts to have an easier packaging integration,
     using default variables.
     Make difference between SQLite3 and SQLite in db_get_type()
27Aug08
kes  Apply most of changes in a patch from:
      Michael Stapelberg <michael+bacula@stapelberg.de>
      that allow the Bacula FD to compile on IRIX 6.5.
26Aug08
kes  Apply patch from Bastian Friedrich that accepts a yes on a
     delete volume command line.
kes  Attempt to fix bug #1128 InChanger flag cleared during Migration
     job when reading from one autochanger and writing to another.
kes  Minor tweaks (copyright dates convert to use method instead of bnet).
21Aug08
kes  Fix NULL Volume error when reading (or Migration or VBackup) must switch
     drives when no tape is mounted.
18Aug08
kes  Add additional info to some SD messages.
kes  Add fix supplied by Martin Simmons for turning off EOL character
     in new console multi-command code.
14Aug08
kes  Fix a Verify InitCatalog problem where in certain cases
     a garbage filename may be entered in the verification database.  This 
     fixes bug #1143.
13Aug08
kes  Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
     sent in by Riyas Yoosuf.
12Aug08 
kes  Fix seg fault in Dir during estimate command with no level value
     given. This fixes bug #1140.
08Aug08
kes  Add message to migration job when the target job is already migrated.
     This closes bug #1129.
30Jul08
kes  Fix Win32 build.
kes  Raise some restore debug levels.
kes  Replace off_t by boffset_t where ever I found it.
28Jul08
kes  Define a machine dependent ioctl request type for use with 
     vtape_ioctl().
26Jul08
kes  When a migration job actually runs, re-check the Job record
     and skip if the job is already migrated. This should
     significantly reduce the problems with bug #1129.
24Jul08
kes  Set MALLOC_CHECK_=0 in environment before starting Bacula to
     turn off glibc checks that prevent getting good dumps.
kes  Implement console 'wait mount' command. Doesn't yet work.
kes  Implement timeout=nn on console 'wait mount timeout=nn' command.
kes  Break the do_swapping into do_unload, do_swapping, and
     do_load.  It is much more logical that way.
kes  Implement a set_dcr_from_vol subroutine in acquire.c for
     reading volumes. This allows the dcr to be refreshed after being
     zapped when the wrong volume is mounted.
     This should fix bug #1126 -- During multiple tape restore, bacula 
     does not ask for physical tape change, but rereads same tape
23Jul08
kes  Apply patch submitted for bug #1107 with a small modification.
     This fixes a bug where bcopy copied too many records.
kes  Make some tweaks to bsmtp based on patch submitted in bug #1124.
     This fixes bug #1124.
kes  Make the default bat restore Pool be Any. This fixes bug #1118.
22Jul08
kes  Remove debug statement that crashes the SD at the end of
     a tape during restore. Fixes bug #1125.
21Jul08
kes  Implement Win32 bat changes made to Branch-2.4
20Jul08
kes  Tweak separator command in console to start disabled and
     allow defining no separator character.  Also make code a
     bit more fault tolerant.
kes  Make btraceback write the traceback to the working directory
     before attempting to mail it.
kes  Add a RFC to Projects.
18Jul08
kes  Attempt to implement a kludge to make Qt work with bat
     on Win32.
kes  Setup rstorage correctly. Virtual backups are working.
17Jul08
kes  Move setting JobLevel and JobType into a method, which should
     allow completing Virtual Backups.
kes  Fix verify jobs to work again.
16Jul08
kes  Virtual Backup tweaks -- it is close to working.
15Jul08
kes  Ensure that SD tried to mount a volume not in an autochanger
     at least once before asking for operator intervention.
kes  Make SD aware of Virtual Backup jobs.
kes  Add VirtualFull for bat.
kes  Changes to get read storage correct for Virtual Backup.
14Jul08 
kes  Remove old code from label.c
kes  Split display_display_info() out of write_bsr_file()
kes  do_vbackup_init() working -- i.e. bootstrap file built.
kes  Change Bacula trademark owner from John Walker to Kern Sibbald
kes  First non-working cut of vbackup
kes  Correct FD heartbeat code to use volatile variable accessed by
     two threads.
kes  Zero thread id with memset if on Win32 in case it is a struct.
kes  If cannot create JobMedia record, continue to try to write eof
     and clean up in block.c
12Jul08
kes  Add code to interface OpenSSL to new Win32 pthreads code which
     used a structure for thread_t.
09Jul08
ebl  tweak bat for win32 compilation
08Jul08
ebl  Remove tokyo cabinet from the source
ebl  Update configure/autoconf to support berkeley DB
ebl  Add a sort to db_get_file_list() to improve bsr construction time.
07Jul08
kes  Add a mtx-changer.conf file that is not overwritten during
     an upgrade. It fully configures the mtx-changer script.
kes  Clear in-use bit on vol when unused while swapping.
06Jul08
kes  Remove sleep at end of ./bacula
kes  Clear hash packet for hardlinked files correctly. This corrects
     a long standing bug where hardlinked files selected individually
     would occasionally not be restored.
05Jul08
kes  Apply Eric's patch to ensure that autoprune does not return
     a Volume not in the autochanger unless requested to do so.
kes  Correct bat restore display of multiple drives. This fixes    
     bug #1117.
kes  Do find_a_volume() each time an unload is done. This
     fixes the failure of maxvol2-test.
04Jul08
kes  Add some SD debug code.
kes  Do find_a_volume() each time an unload is done.
kes  Apply Joao's DBI patch that adds easier configuration of DBI drivers,
     and adds --with-db-port to ./configure.
kes  Use Qmsg() in job.c watchdog callback.
03Jul08
kes  Release main control rwlock if ABORTing.
kes  Make watchdog connect timeout queue messages rather than sending
     directly to avoid lock conflicts with the real thread.
kes  Add const char in dbd.c to avoid compiler warnings.
kes  Fix python compiler string warning. Note, IMO the GNU C++ 
     compiler guys have made a *very* bad change to their compiler.
     They now force all strings to be 'const' unless you explicitly
     cast them, which is extremely ugly and ruins nice code as well
     as creates a lot of useless work.
02Jul08
kes  Fix mtx-changer to detect both versions of Ubuntu (Debian)
     mt. This fixes bug #1116.
kes  Add const in python files to reduce compiler warnings.
     This may have to be backed out because of later compiler
     strict checking.
kes  Fix failure of 2drive-concurrent-test. Always read label;
     clear_unload() only after drive is defined in acquire_for_read().
27Jun08
kes  Generally clean up the manual tape loading code. The main
     conceptual change is that when a volume is marked to be unloaded,
     its volume name is retained, and it is only marked as unloaded
     when either the autoloader says it is unloaded or another tape
     is read on that drive.                                     
25Jun08
kes  Add debug code and refactor subroutine in stored/mount.c
kes  Fix format problem in bscan output reported in bug #1105.
ebl  Fix get_next_volume_for_append logic with autochanger
      - use pruned volumes if found
      - don't reset the inchanger flag after getting a recycled volume
        or a scratch one
     Fix recycle_oldest_purged_volume to take InChanger flag in account
23Jun08
ebl  Add mmap/unmmap implementation for tokyodbm under win32
22Jun08
kes  Make first step toward eliminating globals from config
     scanning. Also should be a workaround for FORTIFY_SOURCE
     GNU C bug -- fixes bug #1042.
21Jun08
kes  Apply duplicate job tests to restarted jobs.
kes  Copy more data when restarting a job so that run
     overrides are kept. This should fix bug #1094.
20Jun08
kes  More word alignment cleanup.
kes  Fix bug where SD did not ask operator if the device could not
     be opened. Reported by Eric.
19Jun08
kes  Add dbuser to DIR conf file (replaces user).
kes  Add --with-db-password to ./configure
kes  Fix regress to handle db_password.
ebl  Add new 'status storage slots' that list autochanger
     content.
ebl  Update vtape driver to compile only under Linux.
ebl  Fix a bug when restoring with a wrong mediatype.
18Jun08
kes  Eliminate ints from conf files and structures to avoid
     word alignment problems
17Jun08
kes  Fix bug reported by Scott Barninger where the bacula script
     refers to scripts in the wrong directory. Needed to meet the
     requirements of recent FHS location changes.
ebl  Disable vtape for FreeBSD.
15Jun08
ebl  Modify disk-changer to check if slot contains something before
     loading it.
14Jun08
ebl  Fix vtape on win32 and debian.
ebl  Fix autoselect patch (cause segfault).
13Jun08
ebl  Fix autoselect option broken for a while. Fix #1089. Need some
     work with StorageId to be able to use a particular drive in a 
     autochanger.
09Jun08
ebl  Rename vtape to vtape.
ebl  Update vtape driver.
08Jun08
ebl  Modify vtape driver to avoid sparse file.
kes  Add make clean of qt-source directory during ./configure
kes  Store last block number written to tape in DEVICE and
     use it for testing for correct last block on EOT.

Release Version 2.4.0:
04Jun08
kes  Fix Win32 build.
03Jun08
kes  Make sure to clear JS_WaitMedia when operator mounts a Volume.
     This fixes bug #1095.
31May08
kes  Add create_postgresql_database.sql to Win32 installer. Should 
     fix problem reported by Juilio Monteiro.
kes  Get correct slot when auto unloading a device. This fixes bug
     #1086.
30May08
kes  Fix multiple media restore.
kes  Make DEVICE Slot private and access it via a method.
     Allows better control over when it is set and cleared.
kes  Fix possible seg fault if SQL error.
28May08
kes  Add Martin's fixes to argument scanning for the estimate   
     command. This fixes bug #1093.
kes  Add debug code to SD.
kes  Fix renaming a Volume, which used the wrong Volume name.
26May08
kes  If operator has rewind tape, print warning, release tape and
     try once more. If tape is positioned somewhere, something went
     wrong, so mark the tape in error and try once more. Previously
     this error was fatal, now it produces an error message.
kes  Ensure correct volume name displayed during restore
kes  Ensure that Volume is mounted for restore.
25May08
kes  Fix a few more Coverity reported problems.
24May08
kes  Apply Allan Black's status dir job count patch.
ebl  Add information about IMPORT/EXPORT slots in mtx-script.
kes  Enhance a couple of SD debug messages.
kes  Tweak unload flag setting and ensure it is set during swap.
23May08
ebl  Fix #1091 about bad output in estimate command.
21May08
kes  Modify autochanger locking to attempt to avoid race
     conditions. 
kes  Make sure device not busy before doing label command.
kes  Display open() errors except when polling. Previously too
     many were suppressed.  This should fix bug #1070.
kes  Fix Win32 reparse points. Bacula will not recurse into any
     reparse point directory, including mount points, unless the
     directory is explicitly mentioned at the top level (same as
     with Unix).  A file that is linked to another file will be
     backed up -- much as Unix does for hardlinked files.
     This fixes bug #1041.
20May08
kes  Remove double quotes from ChangeLog and ReleaseNotes
kes  Remove StorageId test when pruning and recycling (Eric's changes).
kes  Remove old form of locking when getting volumes -- causes deadlock.
kes  Change bat dirstat layoutWidget to dirstatlayoutWidget to make
     the name unique and to eliminate compile time error.
kes  Add accurate.o to Win32 FD Makefile
19May08
kes  Fix cats dll build on Win32 after db_update_job_end_record
     calling sequence change.
ebl  Switch to tokyo dbm instead of htable in accurate code
ebl  Include tokyo dbm to bacula source tree
17May08
kes  Fix buffer overruns detected by Coverity.
13May08
kes  Tweak joblog display.
12May08
kes  Implement --without-qwt
kes  Fix layout of restore tree dialog
kes  Add configure bat QWT libraries, so that bat can be built
     with or without the QWT libaries.
11May08
ebl  Add dummy tape driver for regression tests.
kes  Make sure we unload the right slot when swapping.
10May08
kes  Add debug times, reduce size of two-pool-changer test 
08May08
ebl  Tweak autoconf scripts for vtape
07May08
kes  Improve SD reserve debug code.
kes  Testing an improvement to free up volumes no longer in use.
03May08
kes  Rework SD acquire for read to handle autochanger Volume
     swapping.
kes  Implement regression that explicitly tests swapping a Volume
     from one drive to another.
kes  Enhance disk-changer to detect most error conditions.
kes  Fix SD code so that it properly swaps a Volume between drives.
     This fixes bug #1083.
02May08
kes  Apply libdbi patch from Joao Freitas for regress and for 
     Bacula trunk. Regress now works with libdbi. Nice.
kes  Apply .nobackup patch from bug #1077 submitted by 
     Edwin Groothuis.
kes  Apply Bastian Friedrich's patch that adds %p to edit the pool
     name into jobs cloned via the run directive.
01May08
kes  Prevent a Volume that is being swapped from being freed from
     the volume list. This will most likely fix, at least partially,
     bug #1083.
kes  Fix strippath so that it does not get a buffer overrun and crash FD.
     This fixes bug #1078.
kes  Remove 50 millisec wait in SD that broke debugger.
ebl  Add MaxRunSchedTime option that specifies the maximum allowed time 
     that a job may run, counted from when the job was scheduled.
ebl  Fix MaxWaitTime option that specifies the maximum allowed time that 
     a job may block waiting for a resource, counted from when the job starts
ebl  Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
kes  Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
     that implements multiple commands per line in the console when using 
     readline. Modify the default to use a semicolon as the command separator.  
28Apr08
ebl  Fix SQL query in migration code.
ebl  Make accurate mode with hash disk pass regression tests
27Apr08
ebl  Implement first cut of accurate backup with hash disk.
19Apr08
kes  Force unload of volume when wrong volume mounted in SD.
17Apr08
kes  Fix bat seg fault at termination.
kes  Add Bacula generated version to bat about box.
 
16Apr08
kes  Experiment with allowing multiple read jobs.
kes  Move final volume swapping code to DCR method and
     call it from acquire_for_read().
kes  When wrong volume is mounted during read, unload_autochanger.
15Apr08
kes  Integrate the libdbi changes from Joao Henrique Freitas
14Apr08
kes  Stop searching for Volumes in SD askdir if DIR returns the
     same volume name twice in a row.
kes  Close bat console windows first to eliminate error message
     from the notifier.
13Apr08
kes  Tweak the swap Volume from one drive to another code so that
     it now seems to work.
kes  Resolve several problems with recycling that broke the new
     code (these problems are in 2.2.9 as well).
kes  Remove the volume lock when calling the sysop code.   
kes  Don't mark a reserved volume with no writers as unused otherwise
     jobs fail.
12Apr08
kes  Rework class structures for VOLRES, DCR, and DEVICE to make
     the method names a bit more logical, and for more logically
     handling the responsibilities.
11Apr08
kes  Remove redundant code in terminating the scheduler that just
     causes a seg fault in many cases.
kes  Cleanup releasing a volume and make it a DCR method.
kes  Improve algorithm for detecting pre-reserved volume and
     swapping volumes.
10Apr08
kes  Tweak volume swapping code so it works.
kes  Correct name overloading in mount.c
kes  Replace released flag in VOLRES with reserved and add access
     methods for the VOLRES class.
kes  Prevent volume from being released while being swapped.
kes  Apply Bastian Friedrich's edit codes patch for the bpipe-fd
     plugin that add %w (where) and %r (replace flag) editing to
     the plugin line.
kes  Apply Bastial Friedrich's edit pool=%p patch for run clone
     jobs.
kes  Refactor parts of stored/mount.c
09Apr08
ebl  Add sanity checks for VolWriteTime and VolReadTime
ebl  Take care of bad clock changes while computing VolWriteTime
     and VolReadTime. This should fix or limit #1066
kes  Correct error string numbers in dird/catreq.c
kes  Restructure reserving, acquiring, and mounting volumes. Calls to
     autochanger are deferred for mount.c -- simplifes the code.
08Apr08
kes  Do not prune any running job. It just fails the job.
kes  Lock the volumes when changing dev->reserved_device and marking
     the volume unused otherwise the device can get reserved by
     another job before the volume is released, thus blocking it.
06Apr08
kes  Correctly detect Ubuntu systems, and add ubuntu platform directory.
kes  Fix bug #1063, reuse of freed ptr in list nextvol.
kes  Release regex compile buffer in filed/job.c
kes  Add proper type of const char in sql_create.c
kes  Turn off debug in daemon termination routines
kes  Move free_volume_list() before devices are freed in stored.c
kes  Fix reference to uninitalized stack variables in bregex.c. 
     This should correct bug #1067.
04Apr08
kes  Fix possible seg fault in SD when freeing a volume entry.
03Apr08
kes  Implement unload_dev() before swap device.
ebl  Add statistics prunning with option and menu
kes  Separate unload_dev() from unload_other_device() in autochanger.c
02Apr08
kes  Apply patch from bug #1069 that corrects spurious error messages
     when ACLs enabled on SGI but no ACL exists.
ebl  Fix small segfault in bacula-sd when debug level is 500
kes  Modify run_program() and run_program_full_output() to use
     call by reference for the results string. This corrects a long
     standing problem where the address of the string may be changed
     in the subroutine but not in the calling program.
01Apr08
kes  Re-enable code to remember last volume mounted on a non-tape
     Autochanger.
kes  Add patch supplied in bug #1068 that fixes a SD crash when using
     a Virtual autochanger.
kes  Generate correct JobMedia records during spooling/despooling when
     running concurrent jobs.  Thanks to Tom Ivar Helbekkmo
     <tih@hamartun.priv.no> for excellent analysis and testing.
31Mar08
kes  Tweak hash algorithm for htable using Martin Simmons idea
     for doing a circular shift.
kes  Remember what volume is in VTLs (previously turned off for
     testing).
kes  Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
     pointed out some problems in creating JobMedia records during
     spooling with concurrent jobs. Fix the problem by updating the
     start file position before despooling and generate a jobmedia
     record at the end of despooling.
28Mar08
kes  Fix handling of JobMedia records during spooling and when a
     Volume is changed without actually writing data to the Volume.
27Mar08
kes  Rework certain SD locking based on gdb tracebacks of deadlocks
     sent by Eric. This code now uses only the volume_lock() rather
     than the reservations lock when at EOM and acquiring a new
     volume. 
kes  Ensure only one exit point in several subroutines.
26Mar08
kes  Implement bsock code to permit locking. Use the new code in Verify
     in the FD to prevent the heartbeat thread from disrupting the Verify
     data sent to the Dir.
kes  Modify SD locking to eliminate locking the reservations system from
     outside the system. Use the volume lock when getting media data
     and reserving a new volume at end of media.   
kes  Add Eric's volume_unused() fix to stored.c so that Volumes found
     when SD starts are not locked into place.
24Mar08
kes  Fix error compiling runscript code on 64 bit machines.
kes  Tweak Win32 mount point code.
kes  Fix a couple of bugs in the accurate code (bad sscanf, buffer not
     cleared giving bad file estimate).
kes  Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
     5 Million entries.
22Mar08
kes  Keep Schedule run lists in order as suggested by
     Bastian Friedrich.
21Mar08
kes  Implement autostart scripts for Debian.
ebl  Implement upgrade catalog scripts.
20Mar08
ebl  Apply jobstat patch for long term statistics. Have to implement
     purge stats command and upgrade scripts.
kes  Fix mtx-changer.in for broken Debian mt program.
19Mar08
kes  Fix large number of JobMedia records reported by Eric Bollengier.
18Mar08
kes  Apply doc fix from bug #1062.
kes  Resolve crash and improper restore wx-console Win32 restore
     GUI. Fixes bug #1065.                   
kes  Update Win32 wxWidgets to latest version.
kes  Attempt to do correct handling of Win32 mount points. Should
     fix bug #1046.
kes  Fix Win32 FD backup/restore memory leak due to improper termination
     of BackupRead/Write. This fixes bug# 1038.
16Mar08
ebl  Reduce memory usage for accurate backup, working only with ctime
     and mtime. (not all Lstat field) 
     About 40MB for my Linux system (400.000 files)
14Mar08
kes  Add dcr->reserved_volume flag that allows us to release a volume
     even if it is not vol->released.  This allows maxvol2 to work when
     Volumes expire and we are already writing to the device (i.e. a
     volume is pulled out from under us by another job terminating after
     we reserve the drive).
13Mar08
ebl  Permit multiple command/console per runscript definition.
     RunScript { command = /bin/true ; command = /bin/false ... }
ebl  Add RunsWhen = AfterVSS to runscript. You can execute a command
     (restart an application) just after the VSS snapshot on windows.
kes  Don't zap dcr values during release_volume() as they might
     have the next Volume to be mounted.
kes  Fix AIX prototype.
12Mar08
kes  Second cut of drive switching during backup.
11Mar08
kes  Fix Win32 build.
kes  Update Win32 version of wxWidgets to most recent version.
kes  Tweak Copy job details.
kes  Rework dir_find_next_appendable_volume to make a bit more effort
     to find a suitable volume before giving up.
10Mar08
kes  Make ask_sysop_to_create... to return if waken from wait.
     This helps get out of blocked conditions.
kes  Experimental implementation of switch_device in reservations. 
kes  Implement FD version to allow easier protocol changes.
kes  Add Plugin Options string -- not yet passed to FD.
kes  Implement PluginOptions ACL.
09Mar08
kes  Attempt to correct problems with restores with autochangers and
     use counts going negative 
kes  Rework SD status command and implement API for bat. Implements
     header, runing waitreservation, devices, volumes, spooling,
     and terminated status keywords.
     .status storage=xxx <keyword>
kes  Clarify TLS error message by adding double quotes around name.
kes  Simplify SD/FD status code by putting api flag in STATUS_PKT
kes  Pass jcr to tls routines so debug messages can be handled better.
kes  Rework jobq resource allocation code, and possibly fix a bug
     that caused reference counts to get out of sync.
08Mar08
kes  Rename fd/dir plugin to use Bacula standard underscore.
kes  Plugin work -- bring dir up to fd level.
kes  Start implementation of VTL code
kes  Fix Win32 build after adding new cats subroutine.
06Mar08
kes  First cut at Duplicate Job implementation.
05Mar08
kes  Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
kes  Start PluginOptions string, and refactor a bit of ua_run.c
ebl  Apply Allan patch that permit to reset recyclepool. 
04Mar08
kes  Test patch -- possible fix or improvement for bug #1053
kes  Refactor FD and SD status commands to permit new API code in
     SD, and to fix Win32 build.
kes  Win32 build is now working.
03Mar08
kes  Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
     some ideas in patch from Scott Bailey.
kes  Begin implementation of duplicate Job control.
kes  Fix some of Win32 build after recent additions.
kes  Apply patch from Frank Kardel that implements 'honor no dump flag',
     which causes the FD to detect whether or not the OS has the 
     honor no dump bit (*BSD systems), and if so, to skip backing up
     any file with this bit set.  The feature is enabled by setting
     'honor no dump flag = yes' in the Options section of a FileSet.
28Feb08
kes  Correct po warning message with datarootdir
kes  Implement more code in dird.c to put configuration parsing in
     a class rather than use globals.
kes  Restructure SD status command for implementation of bat API
     interface.
27Feb08
kes  Suppress incorrect 'Will not descend from x into y' messages.
kes  Eliminate FORTIFY_CODE=2 bug, and make first cut at removing 
     daemon globals used by parser.              
kes  Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
26Feb08
kes  Fix free of plugin_list when none exists.
25Feb08
ebl  Apply accurate project patch.
24Feb08
ebl  Fix a segfault when using strip_path option. (Use of pm_strcpy
     on non-mempool object) 
kes  First cut of converting FD .status to work with bat API.
     New form is:
     .status client=XXX header
     .status client=XXX running
     .status client=XXX terminated
kes  Implement first cut of Copy Job.
kes  Implement Catalog in Pool resource. It overrides catalog specified
     in the Client resource.
22Feb08
kes  Apply patch (with some difficulties) from Joao Henrique Freitas 
     <joaohf@gmail.com>, which adds support for libdbi as a Bacula
     database driver.
kes  Add patch from Martin Schmid scm@apsag.com that checks to see if
     ftruncate() actually works. In the case of some (cheap) NAS devices,
     it does not, and so recycling NAS Volumes does not work. The code
     simply unlink()s the file, then recreates it.  This fixes bug #1011.
21Feb08
kes  First incomplete cut of big malloc blocks for htable.
kes  Tweak plugin code.
17Feb08
kes  Plugin debug code + tweak a couple bat dialog layouts
14Feb08
kes  Fix creating first JobMedia record during Migration to include
     proper index. This caused slow restores of migrated jobs.
kes  Temp fix to plugin name file_index.
kes  Bacula backed up and restored a MySQL database.
13Feb08
kes  Implement plugin restore.
kes  Implement parsing of db_driver to give db_type index.
10Feb08
kes  First cut of plugin restore code.
kes  Fix bug #1047, which had a heap overrun when stripping certain paths,
     and do not strip paths on symbolic links.
kes  Set catalog backup database and user name from values specified on
     the ./configure line.
ebl  Fix #1031 about wrong pool source information in job report.
09Feb08
kes  Fix Win32 build.
kes  Remove a redundant jcr argument to find_files, match_files, and
     find_one_file.
kes  Implement '.status dir header|scheduled|running|terminated' that
     prints the requested status section. With the exception of the
     header, the other reports have fields separated by tabs (\t).
08Feb08
kes  Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
     a resource embedded run command to find a since time if no explicit
     since time was supplied on the command line.
kes  Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
     that updates the state file at job termination time in addition to
     when the daemon terminates.
05Feb08
kes  First version where a plugin did a backup.
     bpipe-fd.so created a backup file, wrote a test
     string to it, and Bacua could restore this fabricated file.
02Feb08
kes  Implement DB Driver = string for the DBI driver.
kes  Remove all old bdb_xxx.c code.  Add dummy routines to bdb.c
kes  First cut of code for loading Win32 plugin dlls. Implement
     dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
     and implement a dlfcn.h file based on opengroup's definitions of
     the functions.
01Feb08
kes  First cut plugin directives.
30Jan08
kes  Apply patch from bug #1049 to prevent stripping the path on a
     symlink.
kes  Attempt to fix bug #1047 where stripping a path corrupts the
     heap. Waiting for feedback.
kes  Correct the Mount message not to suggest labeling a new tape
     when doing a restore.  Submitted by email by John Stoffel.
kes  Attempt to work around gcc FORTIFY_SOURCE bug that crashes the 
     FD by using casting. Reported in bug #1042.
28Jan08
kes  A bit of crypto cleanup.  More later.

Release Version 2.2.8
25Jan08
kes  Apply patch from Martin to correct bug #1040, bscan sets existing
     ClientId to zero.
kes  Fixed important spelling error in doc -- bug #1045.
23Jan08
ebl  Fix bextract to be able to extract non-portable Win32 data to 
     Unix/Linux clients
kes  Move initialization of read/write res lock earlier in the code.
     This fixes the crash with a null conf file. This fixes bug
     #1030.
kes  Redefine CURES in lib/parse_conf to be URES and move it all
     into lib/parse_conf.c -- this responds to bug #1042, but does
     not fix it. The fix is not to compile with FORTIFY_SOURCE.
kes  Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
     the trunk SVN. I don't think this was reported as a bug.
17Jan08
ebl  Fix a bug during tape initialization with MTSETDRVBUFFER.
12Jan08
kes  Fix Win32 build with new .def files and DLL_IMP_EXP ...
10Jan08
kes  Add DataDespooling and DataCommitting status (committing is
     the last despooling).
kes  Finish implementation of new reservations code noted below.
08Jan08
kes  Fix bsnprintf for float point numbers. I broke recently when
     parameterizing some variables. This fixes bug #1036.
kes  Undo recent reservations changes ... will apply them later
     when they work better.
06Jan08
ebl  Fixes #1034 which cause mysql to hang the connection after 8h
ebl  Change default statistics target of filename.name and path.path
     fields for PostgreSQL. This speeds lookup by indexes. Thanks
     to Marc Cousin.
kes  A few more tweaks to new reservation code. Make sure to clear
     vol released flag when retaking volume. When reading label and
     label is bad mark volume unused. When recycling, mark volume
     unused so it can be renamed.
05Jan08
kes  Fix reserve_volume() so it doesn't release a volume in use
     (i.e. a volume entry not marked released). This should be
     the last part needed to fix bug #1018.
03Jan08
kes  Move Heartbeat documentation from Job to Director resource.
     This fixes bug #1033.
02Jan08
kes  Fix existing switch drive SD code to call autochanger to release
     any old volume. This must be done to keep the autochanger from
     releasing subsequently newly reserved volumes in doing a close().
     This should fix bug #1018.
kes  Fail if attempting to get console input in batch mode. This
     should help fail RunScript console commands that are incomplete.
kes  First cut implementing switch_drive() in SD (not actually called).
31Dec07
kes  Implement first cut running console commands in a RunScript.
29Dec07
ebl  Fixes bug #1028 where 'Selection Type' option was not usable 
     with JobDefs.
ebl  Fixes bug #897 and bug #1005 where bacula doesn't display runscript
     output in error.

Release Version 2.2.7
24Dec07
kes  Add new free_tls() entry point so that Win32 builds.
kes  Fix compile warning in src/lib/util.c
kes  Fix entry point for edit_job_codes() so that Win32 builds.
kes  Fix seg fault Frank Sweetser reports in regression testing
     on his systems. The problem was that the original author of
     bsnprintf.c did not take into account the side effects of
     using ++x in the argument to a #define.
kes  Make SD protocol backward compatible with version 2.2.x.
19Dec07
ebl  Fixes bug #1015 where bacula failed to restore acl to a socket
     because Bacula no longer restores sockets.
ebl  Always use ignorecase fileset option on win32 FD.
14Dec07
kes  Apply patch from  Michael Stapelberg <michael@stapelberg.de>
     that implements double quoting include names in conf files,
     and also allows piping input by having the first character 
     be a vertical bar (|). 
kes  Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
     that implement %f in RunScripts to pass the FileSet name.
kes  Skip leading | when lex input comes from a pipe as suggested
     by Michael Stapelberg <michael@stapelberg.de>.
13Dec07
kes  Apply patch for bsmtp Win32 daylight savings time fix supplied by
     Nerijus Baliunas <nerijus@users.sourceforge.net>
12Dec07
kes  Implement Plugin Directory and plugin events.
11Dec07
kes  Implement a security enhancement: TLS authentication but no       
     encryption. Enabled by setting 'TLS Authentication = yes'.
     Note when this is on, TLS encryption is turned OFF!
10Dec07
kes  This patch corrects a problem where the maximum concurrent storage
     jobs counter gets out of sync during restore jobs causing jobs to
     'wait on max Storage jobs'.  This patch fixes bug #1009.
03Dec07
kes  This patch fixes bcopy so that it produces correct Volumes.
     It fixes bug #1022.
kes  This patch eliminates spurious output to the console during a VerifyVolume
     job that contains encrypted data. It fixes bug #1024.
02Dec07
kes  This patch prevents the 'status dir' command from trying to use a scratch
     volume and possibly moving it from one pool to another.  This patch fixes
     bug #1019.
01Dec07
kes  Add new include to postgresql.c suggested by Marc Cousins so
     that it compiles correctly with pgre version 8.3.
30Nov07
kes  Fix --archivedir addition to configure. Replace it with
     --with-archivedir in configure.in  This fixes the regression       
     test builds.
kes  This patch fixes bug #1012 where the job is canceled because
      of Max Run Time exceeded when the job has not yet started.
29Nov07
ebl  Apply Richard Mortimer patch that fixes #1016 when there are more than 
     one 'part' to write.  Instead of each part being stored on disk, 
     written to DVD, then deleted from disk, all parts are written to disk,
     and only the last is written and deleted from disk.
kes  This patch fixes the status command to include the formating string for
     JS_AttrInsterting.  It fixes bug #1021.
kes  This patch should fix the Mac OS X build problem on the latest
     Darwin, where sys/types.h was not included correctly (apparently
     due to a change in the Mac headers).  The solution was to explicitly
     ensure that it is defined for the ./configure.
     This patch also has a rebuild of configure that includes the Debian
     qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
kes  This patch should ensure that queued messages to the console are
     displayed as soon as possible.  It should fix bug 1007, but has been
     reported not to work.
14Nov07
kes  This patch fixes the infinite loop when trying to increase the
     maximum number of volumes in a Pool during the add command.
     This patch fixes bug #1008. 

Release Version 2.2.6
09Nov07
db   Remove extra data on estimate command in joblist for bat.
04Nov07
kes  Cleanup of code in SD that sets the LastWritten date. This doesn't 
     really change anything, but is the beginning of doing it *right*.
     To do it completely right the LastWritten date must be passed to
     the SD, but it is not yet done.
kes  Minor tweaks to some bat restore SQL.
kes  This patch fixes bug #1003 where putting the message output from
     a Verify job into the catalog results in a recursive loop.  The problem
     seems to show up only with postgresql (to be verified).
kes  Correct %x to %p in postgresql debug statement.
02Nov07
kes  Fix bug #942 where lots of emails where generated when the heartbeat
     interval was low and Bacula wanted a different tape from the one in
     the drive.
25Oct07
ebl  Add new SD despooling attributes and Dir inserting attributes 
     job status codes in the catalog (Status table).
24Oct07
ebl  Use qmake-qt4 instead of qmake when available (debian system).
22Oct07
kes  Add a security warning to src/cats/make_catalog_backup.in indicating
     that passing the password via the command line (arg 3) is insecure.
     This responds to bug #990 (it doesn't fix it).
19Oct07
kes  Set default debug_level to zero. This corrects bugs #991 and #993. 
kes  Fix a crash in bat when it cannot connect to the Director for example
     if the Director is not running.
kes  Remove redundant INDEX (JobId) from File table in the trunk.
     This fixes bug #992.
kes  Make explicit exception to GPL in LICENSE to permit linking
     the Win32 FD with Microsoft VSS code.
kes  Apply the Solaris package patch from 
     Masopust, Christian <christian.masopust@siemens.com>
kes  Apply the patch to optionally add a timestamp in the debug output
     submitted by Mariusz Czulada <manieq@wp.eu>.
18Oct07
ebl  Use PQerrorMessage instead of PQresultErrorMessage in postgresql
     backend (sql_strerror). Fixes bug #989
16Oct07
kes  Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
     It applied with no problems.
kes  Add PATH command to SunOS part of mtx-changer.in so that sed and
     awk are on the path.  
kes  Redirect stderror to stdin on mt status command in mtx-changer.in
     since the status is returned on stderr on Solaris.              
kes  Activate Close button on tray-monitor window. This fixes
     bug #986.
kes  Check for NULL item in parse_conf.c before calling it.  In the
     case of Device, there is no item and this caused a seg fault when
     Device appears in the conf file.
kes  Add a #define __CONFIG_H when including config.h in bacula.h. This
     avoids pulling in config.h multiple times in some new code.
12Oct07
kes  Fix spurious warning message printed when creating a volume with
     a LabelFormat. This fixes bug #976.

Release Version 2.2.5
09Oct07
kes  Add JobId in place of Job name in all the Jmsg() output.
kes  Correct the APP_DESC for the Win32 storage service (remove an e).
07Oct07
kes  Make maxvol-test and new more strict maxvol2-test work. 
kes  Print JobId in all Jmsg() job output.
06Oct07
kes  Add new SD despooling attributes and Dir inserting attributes 
     job status codes.  This fixes bug 961.
kes  Fix Win32 drive display in bat version browser. Fixes bug #962.
05Oct07
kes  Fix doc issue. This fixes bug #963.
kes  Fix listing performance problems in bat. Pointed out by 
     Chris Howells.
kes  Remove old debug code.
kes  Fix bat code that tests for Win32. This should fix bug #968
kes  Query 5 list wrong Vol after migration. This fixes bug #960
04Oct07
ebl  Fix #969 where user can't change Replace option in restore menu.
5ASep07
kes  Save jcr in thread specific data (tsd) for each thread.
kes  Make Dmsg() print JobId as -%u.
kes  Make Jmsg, Emsg, and others automatically pickup the jobid
     for the thread if it exists.
kes  Remove old reservation debug jid code.
kes  Remove get_jcr_from_tid() from OpenSSL and tls code.
ebl  Add an option that permit to specify spool size in job
     definition. (Applying patches/testing/spoolsize_per_job.patch).
     You must upgrade SD and DIR at the same time.
dvl  Add new configuration item --archivedir
dvl  Adjust regression tests to use tmp not /tmp.  This will allow
     multiple concurrent runs of the regression tests.
28Sep07
kes  Fix race condition that drops final block written to volume.
     This happens in rare cases with multiple simultaneous jobs 
     when the Volume fills.  This fixes bug #964.  May be related
     to bug #935 and possibly #903.
kes  Eliminate more strerror() and replace with bstrerror().
kes  Remove BSD getopt and replace with unrestricted IBM version.
kes  Fix Win32 build for changed calling sequences.
kes  More tweaks to the mount volume routines to get everything
     right. Changed variable name from find to have_vol, which is
     much easier to understand.
kes  Enhance btimer debug code.
27Sep07 
kes  Fix FD->SD authorization failure, which was due to spurious
     wakeups from a pthread_cond_timedwait().  Simply check the
     predicate before continuing.  This fixes bug #953.
kes  Add const char where needed (more to do). Remove temp debug code.
26Sep07
kes  Setup SQLite busy handler before doing queries. Fixes bug #967.
kes  Don't overwrite error message in check_tables_version.
     Fixes bug #966.
kes  Unlock batch insert tables with same calls used elsewhere.
kes  Allow starting 59 jobs a second.
kes  Make SD session key more random.
kes  Add retry for SQLite opening db if it fails. Probably helps
     for bug #967.
kes  Suppress extra error messages during batch insert failure.
     Fixes bug #966.
kes  Add jcr to timer packets so if killed message can be sent to job.
kes  Add JobId to all Dmsg() output.
kes  Put some FD auth code on dbglvl rather than fixed.
kes  Return insert attributes error message in db msg buffer to avoid
     false error messages. Helps fix bug #966.
kes  Separate batch init error messages. Probably helps fix bug #966.
kes  Make SD code that contructs attribute insert check string lengths
     more carefully.
kes  If Dir gets an error during inserting attributes, cancel SD.  
     This reduces unnecessary error messages.
24Sep07 
kes  Correct search boolean for getting Volume info
ebl  Cleanup batch insert code. Probably fixes bug #965.
kes  Back out one small change to the reservation system (reserving a volume).
kes  Rework how a Volume is mounted. It is now much more intelligent and
     will always attempt to use any mounted volume if possible and reduces
     calls to the Director asking about volumes.
23Sep07 
kes  Turn off some code when batch insert not enabled.
kes  Edit FD name in connect error messages.
kes  Rework the reservation system to take into account that the Director
     might give us a Volume that is different from the current one being
     used, and to ensure that we don't exceed Maximum Volume Jobs.
     This fixes (mostly) bug #947 '  Maximum Volume Jobs = 1 produces 
     fatal error with multiple jobs running'
kes  Add more debug code in reservation system.
kes  Implement maxvol-test to check bug #947.
22Sep07 
kes  Add code to handle tray monitor separated from Win32 FD.
kes  Fix display of Win32 tray monitor after reboot. Fixes bug #952.
20Sep07
kes  Add missed return in fixing verify bug -- trunk only.
ebl  Fix a command parser issue causing a director segfault.
kes  Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes. 
     This fixes bug #954.
kes  Increase the max block size to 4MB fixes bug #957.
kes  ERABT if user sets min block size > max block size.  Fixes bug #956.
kes  Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
     is not properly mounted (recognized) during a poll.
kes  Apply 2.2.4-verify patch that resolves bug #958.  A Verify catalog
     Job that has differences reports Verify OK.
ebl  Fixes #955 bug seg fault in Dir introduced  with regexwhere relocation.
17Sep07
ebl  Add an option to operate on all pools with update vol parameters.
     This complete the project 20. Patch from Nigel Stepp.
ebl  Add history support to bconsole when using readline.
     Using Ctrl-D to exit doesn't update .bconsole_history
kes  Modify new volume algorithm to use max MediaId for generating next
     volume number rather than the count of Volumes. This should essentially
     eliminate the failure rate if some volumes were deleted. Bug #921.
kes  Begin implemention of Optimize Job Scheduling.
kes  Implement restore callback that Dirk and I agreed on for bat 
     restore. This fixes bug #928. Restore of backup of zero files fails.
kes  Fix SQL Catalog logging which broke with new db_escape_string 
     calling sequence.

Release Version 2.2.4
14Sep07
kes  Fix bacula_cats.def for new db_escape_string().
kes  Increase size of name string when FD making connection to SD.
     May fix bug #953. FD->SD connection failure.
13Sep07
kes  Add code to help Dan debug 2drive-incremental-2disk test.
kes  Add code to try to fix bug #908.
kes  Add waits to multiple exit detection code to try to force pid
     file to always be deleted.
kes  Restore good dev.tar.gz to rescue set appropriate binary property.
     This fixes bug #950.
kes  Fix seg fault in error exit of acquire_for_read after unsuccessfully
     trying to switch drives by checking for blocking before unblocking.
     Fixes bug #906.
kes  Cancel storage daemon in all cases where FD reports error. This
     should fix virtually all cases of bug #920.
kes  Fix db_escape_string() for MySQL which did not compile.
12Sep07
kes  Fix error message that was clobbered when Dir tells SD it does not
     have write permission on Volume.  This should fix a minor point
     in bug #942, but not the main problem.
kes  Add code to cancel job in SD if FD connection fails. This should
     fix bug #920.
kes  Add code in FD exit to prevent loops and a crash on FreeBSD.
dvl  Pass jcr and db into db_escape_string() to enable better escaping
     of strings
kes  Fix migration code to get correct Volume name with multiple volumes 
     by skipping |.  Fixes bug #936.
kes  Implement patch supplied by Landon to fix bug #944 where using
     TLS with bconsole uses 99+% of the CPU.
kes  Note, you need GTK >= 2.10 to be able to link the Tray Monitor
     program.
kes  Move patches into patches directory.
11Sep07 
ebl  Fix bug #946 about 'bacula-dir -t' which doesn't works
     as expected.
09Sep07 
ebl  Using 'm' in bconsole will show messages like before,
     and not memory usage.
kes  Fix bug #935, and probably also bug #903 where files were not
     restored. MediaId was not properly set in JobMedia record after
     a Volume change.
08Sep07
kes  Suppress chown and chmod error messages if the FD is not running
     as root.
07Sep07
kes  Apply Martin Simmons' patch that should turn off the new API usage
     when batch insert is turned off allowing building on older
     PostgreSQLs.
kes  Add ./configure search in qwt-qt4 for qwt package
05Sep07
kes  Bacula is now free of 3rd party GPL copyrighted code!
kes  Remove idcache.c 
kes  Add guid_to_name.c/h which replace idcache.
kes  Remove enh_fnmatch.c.  Make code that references it use fnmatch.c
04Sep07
ebl  Detect if new PosgreSQL batch insert API is present.
kes  Correct incorrect mempool call causing Director crash. Occurs on
     systems without va_copy().
sb   Update spec files for 2.2.1 release
03Sep07
kes  Fix memory pool call in ua_output.c. bug #934.
kes  Replace fnmatch.c and fnmatch.h by modified BSD versions.
     Add test program to fnmatch.c
02Sep07
kes  Integrate patch to README.vc8 from 
     Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
     edit it to get it into Unix patch format.
kes  Implement mkpath.c to replace old FSF makepath.c
01Sep07
kes  Implement savecwd.h and savecwd.c. Remove FSF versions.

Release Version 2.2.1
30Aug07
kes  Update POTFILES.in
kes  Cleanup a few underquoted AC_DEFUNs in configure   
kes  Apply patch from Martin Simmons that adds a test for va_copy to
     ./configure
29Aug07
kes  Fix bug #921 by increasing the number of tries to create a new volume
     from 11 to 100.
kes  Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
     can be called multiple times.  Implement a version for machines
     without va_copy() that gets a big buffer.
25Aug07
kes  Integrate more portable zone offset code into bsmtp.c
     Submitted by Attila Fülöp.
24Aug07
kes  Fix bad SD->FD return status reported by 
     (James Harper) <james.harper@bendigoit.com.au>
ebl  Fix a bug in read_close_session which return random status
     thanks to James Harper
23Aug07
kes  Fix (hopefully) bug #930 by doing a db_escape_string() on file  
     and directory names during restore of single file/directories.
kes  Add sanity checks to .sql command when string is empty. Hopefully
     that will resolve Dirks Director crash.
22Aug07 
kes  Apply patch submitted by Martin Simmons that corrects a seg fault
     in the bsmtp chat subroutine when debug is >= 10.
21Aug07
kes  Fix Director crash when running bat SQL queries.
kes  Add David's notes on Item 8: Copy pools.
18Aug07
kes  Rework projects file to be current and ready for a vote.
kes  Enhance lex scanner error message.
17Aug07
kes  Tweak LICENSE file to mention BSD code.
kes  Fix bat.pro.in so that it includes the OpenSSL libraries only
     if specified on the ./configure.
kes  Add first (not yet tested) cut of bcomm to the qt-console directory.
     This class is intended to allow us to open a second bsock to the
     Director while in the restore subdialog.  
16Aug07
kes  Fix configure to create bat Makefile before creating dependencies.
kes  Eliminate the egg files from the tray-monitor. Use gtk calls.
kes  Add a tooltip to the tray monitor.
dvl  Set the Director's PID file before dropping privs. This fixes
     bug #923.
15Aug07
kes  Update AUTHORs file
kes  Increase the default max concurrent jobs to 20 in FD and SD to
     correspond with the default .conf files.
kes  Rewrite the Win32 service routines.  This eliminates the 3 copies
     some different, of the same file created by RN when porting the 
     Win32 SD and Dir.
kes  Rearrange some of the Win32 directories and the placement of the files
     in them.
kes  Set DEVELOPER flag in version.h

========================================================================
Release Version 2.2.0
09Aug07
kes  Apply a second doc patch from Marc.
kes  Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
     improves the tips section that discusses how to setup multiple
     simultaneous jobs.
08Aug07
kes  Update bat README file.
kes  Apply patch from Allan Black <Allan.Black@btconnect.com> that     
     corrects a typo in the Recycle status check in db_find_next_volume().
     This will probably fix a number of annoying problems with multiple
     Recycled volumes.
kes  Modify most of dird/msgchan.c to use bsock class calls rather than
     bnet calls -- no functionality change.
07Aug07 
kes  Modify the Verify output to specify if files are missing on    
     the Volume(s) or disk.  Fixes confusion in bug #916.
kes  When more than one Volume is read in a migration job, the last
     Volume bytes reported are from the last read volume rather than
     the last written volume. Fixed. This fixes bug #910.
kes  Fix display of Recycle flag after update volume=foo recycle=yes.
     It previously printed New Recyle flag is: no. This fixes bug
     #917.
06Aug07
kes  Correct seg fault when switching tape drives during restore.
kes  Commit uid_gid_name.c (replacement for idcache.c), but will not
     be used until after 2.2.0 release.
04Aug07
kes  Remove fnmatch() in SD that permitted wild card specifications.
     This fixes bug #914.
31Jul07
kes  Fix %g in filename returned by SQL for browse tree reported by
     Dirk.
kes  Fix configure so that it puts config.out in the cwd rather than
     in src/qt-console
kes  Attempt to fix the locking problem reported by Eric in bug #906.
kes  Make berrno class to leave errno unchanged after constructor call.
kes  Make bnet_server use the heap rather than the stack to allocate
     its socket fd pointers to avoid a crash at termination. Problem
     reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
30Jul07 
kes  Create new depkgs and depkgs-qt separating the qwt out of depkgs
     and putting it in depkgs-qt along with Qt4.3.
29Jul07
kes  Rework code in acquire.c that switches drives for reading when
     the Media Type does not match. This should fix bug #906
28Jul07
ebl  Fix a director segfault during job setup #907
kes  Correct seg fault in postgresql when first operation returns no
     rows.  Fixes Dirks File browser problem seg fault with bat.
25Jul07
kes  Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
     building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
     2.6 as well).
24Jul07 
kes  Implement PopUp YES/NO dialog for bat.
23Jul07
ebl  Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
22Jul07
kes  Correct RunScript to terminate job in FD on failure.
kes  Change abort_on_error and AbortJobOnError to fail_on_error
     and FailJobOnError in RunScripts.
kes  Minor tweaks of code formating in RunScripts, principally to
     avoid depassing 80 columns.
21Jul07
kes  Eliminate one #ifdef Win32 in bsmtp
kes  Implement grow tool to grow a file for testing very large databases.
kes  Add big-vol-test to test Bacula seeking with > 5GB.
Release 2.1.28 beta
19Jul07
kes  Modify find_next_volume() to return all values in Media record.
kes  Ensure that we keep Recycle Pool when moving Scratch volumes.

Release 2.1.28 beta
18Jul07
kes  Update Release notes 
17Jul07
ebl  fix a bug in get_scratch_volume() report by Andreas Helmcke
     Warning, in previous beta version, all media get from scratch keep their
     old retention.
16Jul07
kes  Tweaked Win32 installer to remove temp conf files at uninstall time.
     This should fix bug #842. Made a note to look at removing the temp
     files at the end of the install.
kes  Add ability to mount and unmount a file device providing it is
     marked as being removable and has the appropriate mount and unmount
     commands defined in the Device resource. This fixes bug #830.
kes  When applying a storage override, release all previous storage
     definitions rather than just prepending the new storage.
     This should prevent a good deal of confusion.
14Jul07
kes  Implement ./configure search for qwt libraries.
13Jul07
kes  Disable posting the WM_CLOSE message in KillRunningCopy of the 
     Win32 FD.  This should fix bug #893.
kes  Remove an unnecessary beep in Win32 init code.
kes  Update copyright dates in Win32 executable about boxes.
kes  Replace the FSF copyrighted getopt.c and getopt.h in the Win32
     code with a BSD getopt.c and getopt.h.
kes  Remove sched.h from the Win32 compat directory -- not used.
kes  Remove the Exit menu item from the Win32 tray monitor. If you really
     need to shut it down, do it through the services panel or the command
     line.
kes  Remove some inappropriate Bacula FSFE copyrights.
ebl  Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
kes  Fix regress config non-portable test as pointed out by
     Florian Heigl <florian.heigl@gmail.com>
kes  Fix PSCMD for HP-UX in configure.in to have proper syntax.
     as pointed out by Florian Heigl <florian.heigl@gmail.com>
12Jul07
kes  Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
     Reported by Frank Sweetser.

Release 2.1.26 beta
12Jul07
kes  Fix client-only build.
kes  Integrate client-only fixes for bsys (initgroups) and conio from
     Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
kes  Make arguments to get_scratch_volume() in same order as other
     such calls.
kes  Rework the prune_volumes() subroutine so that after purging and
     no volume found in desired pool, it will check for a scratch 
     volume. This prevents recycling the whole scratch pool.
kes  Add code to status storage to print boffset_t (largefile support).
11Jul07
kes  Move qwt (Graphics libarary for Qt4) to depkgs.
kes  You now need a --with-qwt=<dir> to be able to build bat.
kes  Update src/win32/cats/bacula_cats.def to include the new       
     db_get_query_dbids() call on Win32.
07Jul07
kes  Correct a problem when selecting a scratch volume and moving
     it to another pool that lost some columns.
kes  Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
kes  Enhance Autochanger error messages to include Volume and device name.
kes  Rework prune_volumes() code to take account of InChanger flag,
     and to handle recycling volumes going to the Scratch pool and
     current pool because the RecyclePool directive.
kes  Implement a better and more efficient db_get_query_dbids() to
     handle creating and passing back a list of DBIds.

Release 2.1.24 beta
03Jul07
kes  Start work on new more efficient DBId subroutine. First use
     will be for recycling volume to Scratch inchanger.
kes  Increase number of JobIds in pruning from 1000 to 10000. 
     This to be replaced by above routine.
kes  Begin implementation of building Qt4 on Win32.
kes  Correct typo in fix I added for bad TLS shutdown.
kes  Pull 2.0.3 patches into patches directory.
kes  Update Release notes.  Include qt-console in line count.
kes  Update Projects file.
30Jun07
kes  Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes 
     bug in migration code where a job that spanned two volumes
     was migrated twice.
29Jun07
kes  Implement new BST_DESPOOLING blocked state. Change from locking
     during despooling in SD to blocking. This means that other threads
     can work with the device structure, in particular the reservations
     system while despooling.
28Jun07
kes  Fix return in reservation message queue that missed clearing
     the jcr lock (implemented 26Jun07 below).
kes  Rename a number of dev methods to make locking function names
     a bit clearer.
kes  Document locking in lock.c. Move lock structures to new file
     lock.h.
26Jun07
kes  Move reservations message lock to lock jcr only this
     fixes bug #861.
kes  Move main SD locking code into lock.c (new file).
kes  Update Win32 build to include lock.c

Release 2.1.22 beta
26Jun07
kes  Dirk committed the qwt library code for drawing graphs in bat.
kes  Tweak install of qwt so that it is integrated with ./configure.
25Jun07
kes  Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
     out by Eric (my typo).
ebl  Fix configure.in to get batch mode enable
kes  Return correct string from authenticate.cpp in bat when connecting
     to Dir.
kes  Apply patch suggested by Frank Sweetser to fix bug #888 --     
     spurious line drops when using TLS.  
kes  Do not file reparse points when restoring a file that already
     exists -- Win32.
24Jun07
kes  Implement Windows reparse points -- similar to directories, but
     we do not descend into it. This is a first cut. They seem to 
     be backed up, but restore is not yet tested.
kes  Remove restore_blocking in tls code when shutting a socket to leave
     it in blocking mode. Hopefully this will fix the encryption bug  
     reported by Frank Sweetser.
kes  When opening a file for backup, tell the OS that we are going to
     read it sequentially -- optimization.
kes  Change variable names in authenticate_director() to not conflict
     with member names in bat. Caused great confusion with compiler,
     but no warnings.
23Jun07
kes  Queue openssl error messages in case of comm problem.
kes  Do shutdown() call if socket terminated.
kes  Remove some duplicated code in tls.c
kes  Move more of the bsock member variables into private and access
     them with methods.
kes  Add Frank Sweetser's tls-test to the regression suite.
22Jun07
kes  Add Swedish sv.po file
21Jun07
kes  Don't print clock skew message in FD if less than 3 seconds diff.
kes  Add a bit of VSS info to status client.
kes  Implement a first cut of Vista VSS, using Win2003 code.

Release: 2.1.20 beta
20Jun07
kes  Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
     loaded tape but uses first drive).
kes  Fixed bug #807 Restore encrypted backup failed on Windows 2003
     This was indeed a Win32 issue.
19Jun07 
kes  Simplify search of autochanger for in-use Volume.  
kes  Fix exit condition of check for in-use volume.  kes Remove
     inappropriate my_postgresql_free_result() in db_close()
     routine.
kes  Fix bad return in FD when encryption signature not found.
     Probably caused a crash.
kes  Inhibit missing encryption signature error messages for 
     file types where no signature computed.
kes  Correct inverted check on autochanger in reservation system.
kes  Tweak debug code in autochanger reservation.
18Jun07
kes  Add some additional locking in the cats directory in subroutines
     that modify packet variables called from batch insert.
kes  Rework how dcrs are allocated. new_dcr() can now be called
     with an existing pointer, and it will simply clean it up.
     This allows the reservation system to test various different
     devices, and will permit easy device changes.
kes  A bunch of changes all over to handle new new_dcr() calling
     sequence.
kes  Work more on the Volume management in the SD. Remember Volumes
     for tape drives and for autochangers (even virtual disk changers).
kes  When looking at the Volume list to reserve a drive, handle 
     autochanger names correctly by interating through the changer 
     devices.  Also call the Director to see if a Volume is suitable
     for the current job.
kes  Fix some bugs in bscan. Make sure all media records are written.
     Make sure that valid JobMedia records are written for disk files.
     Previously they were completely wrong.
kes  Move source tar files for depkgs-mingw32 to www.bacula.org so
     that the URLs don't change and so that the developers will all
     work off the same copy. Rebuild from scrach.
kes  Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.

Release: 2.1.18 beta
16Jun07
kes  Fix seg fault in FD from incorrect digest size. 
kes  Fix argument to non-OpenSSL crypto.c subroutine.      

Release: 2.1.16 beta
16Jun07
kes  Remove a few malloc()s from the encryption code.
kes  Use the class calls to bsock in filed/backup.c and restore.c in
     place of the old bnet_xxx code.
kes  Implement code that does an on the fly calculation of the  
     signing digest during restore of encrypted files.  It makes
     a best guess at the algorithm, and if it is not correct, will
     then revert to the old code which reads the file after it is
     restored.
kes  Implement at least one missing crypto stream in stream_to_ascii()
kes  Apply patch from William <chowmeined@gmail.com> that fixes bug
     #877 where a reload with bad syntax causes Dir to exit.

Cut: 2.1.14 beta (not released)
14Jun07
kes  Do not free a volume on a tape drive until another volume is
     mounted and read, or the autochanger unloads the volume.
     This should help the SD re-use volumes that are already mounted,
     and should fix bug #886.
kes  Apply patch from user brettedgar that allows gnome2-console include
     the OpenSSL libraries, and hence work with SSL.  Fixes bug #885.
kes  Apply patch from Lucien Weller that fixes day of week calculation
     because of DST flag problem. Fixes bug #887.
10Jun07
kes  Move find_next_appendable_volume() to after acquiring a valid device
     in reserve.c.  This fixes bug #864 -- confirmed by reporter.
09Jun07
kes  Unable to reproduce bug 872. However added additional testing for
     integer.
kes  Bug #874 resolved by documenting SQLite limitations.
kes  Bug #882 resolved by documenting mtx-changer script for new drive code.
kes  Bug #881 resolved by removing typo in mtx-changer script.
kes  Made Frank Sweetser's wiki the official Bacula wiki with his
     approval. Added a link to the wiki on the web page, and implemented
     a backup from http://paramount.ind.wpi.edu                                          
08Jun07
kes  Fix update allfrompool to pass pool name.
07Jun07
kes  Convert to pure GPL v2 license.
kes  Fix sscanf problems reported by Peter Buschman that caused
     a bus error on Solaris.
kes  Rework (simplify) the select prompt in bat.
kes  Move get_jobid_from_tid() into lib and create a 
     get_jcr_from_tid().
kes  Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg().  This
     should definitely fix the problem of lost error messages in the
     encryption code.
kes  Remove over zellous addition of FSFE copyright in a few eggxxx files.
kes  Eliminate tcpd.h from the project. Enclose the #include from the
     library with extern C ...
kes  Add print of signal name when a signal is trapped.

Release: 2.1.12 beta
04Jun07
kes  Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
03Jun07
kes  Implement SQLITE3_INIT_QUERY in version.h that can do an initial
     query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
     makes SQLit3 run 30 times faster, though a bit less safe.
kes  Implement --with-batch-insert in configure and detection of thread
     safe libraries.  It is on by default, but turned off if no thread
     safe library (e.g. SQLite 2) is available.
02Jun07
kes  Fix Bacula PostgreSQL buffer overruns.
kes  Do better checking for NULL results returned from PostgreSQL;
     implement retry for failed queries; clear results buffer after
     failed query. Hopefully this will correct the PostgreSQL failures.
01Jun07
kes  Implement algorithm to handle only one appendable volume with
     Prefer Mounted Volumes = no.
kes  Fix a Bacula PostgreSQL bug dereferencing a NULL pointer      
     returned from a query.
kes  Make volume lock recursive.
kes  Implement an additional volume reservation algorithm that
     starts by considering all reserved volumes then uses the
     old brute force algorithm of searching the resources to
     find a suitable device.
kes  Add new reservations debug code and refine the old code.
kes  Update the win32/dll/bacula.defs file.
29May07
kes  Tweak reservations algorithm to permit a few more cases, i.e.
     volume reserved, but on different drive, ...
kes  Enhance SD status to include Pool and Media Type for drive in a
     more readable format (a bit longer). 
kes  Fix PostgreSQL double free.
28May07
kes  Minor refactoring of restore decryption code.
kes  Add code to smartall.c to detect double free of a buffer.
27May07
kes  Add < > around %r in from field on mail command of bacula-dir.conf.in
     so that bsmtp will create a correct email address (mailbox only).
kes  Modify 'memory' command so that the buffers are listed as 'In use'
     to avoid confusion with Orphaned buffers.
kes  I reworked the OpenSSL include/lib flags to be handled in     
     the standard Bacula way, which should fix bug #863 concerning
     non-standard OpenSSL libraries.
26May07
kes  Implement Help Browser window for bat.
kes  Fix reload bug that reset StorageId to zero.
25May07
kes  Fix TLS #ifdefing when TLS turned off.
kes  Ensure that when labelling a tape with Slot=0 that InChanger
     is not set.
kes  Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query        
     the same.
kes  Add StartTime to final uar_sel_jobid_temp query so that we can
     add DISTINCT (required by PostgreSQL).
kes  Implement BSOCK authenticate_director() method. Eventually will
     authenicate all daemons.
kes  Move several more functions into the BSOCK class.
24May07
kes  Add code to tell the OS that we no longer need a cached
     file that we were reading. In findlib/bfile.c.  Also,
     only cache files that we are reading. Thanks to
     Tobias Oetiker <tobi@oetiker.ch> for the idea.
kes  Tweak to bsmtp to eliminate compiler warnings on Win32.
kes  Implement script to automatically generate cats and dll .def
     files for Win32 dll.
kes  Update README.mingw32 to include new .def file generation.
kes  Correct typo in UTF-8 error message as reported by:
     jhernandez <julianhernandez@gmail.com>
kes  Add additional sm_check() code on debug level 1.
kes  Set default debug level to 1.
kes  Trap SIGABRT in attempt to get traceback.
23May07
kes  Reduce bat connect timeout from 30 to 15 seconds.
kes  More restructuring and implementing BSOCK class in place of
     old bnet.c code.
kes  Remove a few unnecessary malloc() tests in crypto code.
kes  Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
     not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
kes  Remove duplicate HAVE_CRYPTO definition in config.h.in
22May07
kes  Fix Verify InitCatalog mysql_escape_string() trashing memory.
     Make buffer bigger.
kes  Fix Verify InitCatalog. The attributes were not pointing to the
     correct saved location.
kes  Implement message callback so that GUI is sure to get all
     daemon messages. Currently displayed in a dialog in bat.
kes  Ignore SIGUSR2 (Bacula timer) in bat.
kes  Apply regress patch from bug #859 to allow regress to work 
     with Solaris compiler.
21May07
kes  Begin adding TLS support to bat.
kes  Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
     clean up lex.c and make it more readable.
20May07
kes  Move more bnet functions into the BSOCK class.
kes  Fix tray-monitor by not requiring a timer interval in bnet_connect()
kes  Complete change of berrno strerror() method to bstrerror() 

Release: 2.1.10 beta
18May07
kes  Cleanup incorrect email addresses in bsmtp.
kes  Make bat display initial messages rather than discard them.
16May07
kes  First cut of adding .mod to the run command.    
kes  Implement auto display of messages in bat.
kes  Enhanced preferences to allow all Bacula output to be
     displayed in bat.
15May07
kes  Try to make bsmtp date routines more generic.
kes  Fixed bug #856 autochanger documentation.
kes  Rework bsmtp date editing for Win32. This fixes bug #854.
kes  Add new cats entry point so Win32 builds.
14May07 
kes  Attempt to fix bsmtp date editing on OSes without %z editing. 
     Fixes bug #854.
kes  Do better checking for the MySQL 64 bit libraries looking for both
     .a and .so libraries.
kes  Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
     /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
kes  Require the thread safe version of MySQL during configure. Thanks
     to Andre Noll for pointing this out.
kes  Ensure that calls to find_jobids_from_mediaid_list() check count before
     continuing in migration code.
kes  Apply implementation of tray-monitor font derived from gnome-console
     submitted by Andreas Piesk <a.piesk@gmx.net>
13May07
kes  Eliminate important memory loss in SQLite
kes  Fixed the batch insert MySQL thread specific data that was not
     being freed. See cats/mysql.c:db_thread_cleanup().
kes  Fix restore before command.
kes  Convert old hdr.name to name() in a few places.
kes  Implement update jobid command.
kes  Return all time_t dates in db_get_job_record()
kes  Stop watchdog in SD earlier.
kes  Put Pool just after Storage in please mount message.
kes  Fix pointer usage bugs in Verify InitCatalog pointed out by
     Eric.
12May07
kes  Update the po files.
kes  Fix Verify InitCatalog by making it cache attributes.
11May07
kes  Change name bacula-bat to bat for man 1 page to correspond to
     Makefile.
kes  Check for client and store NULL pointers in status command.  This
     fixes bug #845.
kes  Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
kes  Fix sign extended editing of %p.
kes  Clean out a little old #ifdefing in cats/mysql.c
10May07
kes  If time diff between DIR and FD is more than 600 seconds convert
     INFO message to WARNING.
kes  Implement heap size display in status for all daemons.
kes  Attempt to fix MySQL db open memory loss (not successfull).
kes  Don't set SIGKILL and SIGSTOP neither can be trapped.
kes  Eliminate memory loss in MySQL (possibly other SQLs) during
     Query. This looks like a MySQL but but by doing extra releases,
     the memory goes away.  This should fix bug #847.
09May07 
kes  When backup fails, cancel SD before waiting for sd termination.
kes  If SD is waiting for FD to connect during cancel, wake up the 
     thread.
kes  Fix fsf code so that errno is correctly reported.
kes  Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
08May07
kes  Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
     so that Bacula doesn't later stumble into a seg fault.
kes  Use the term Restore Client in the restore Job report.
kes  Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves 
     the original job's FileSetId.
kes  Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
     spooling in migration jobs.  Not yet tested.
kes  Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
     reading conf file from a pipe.  However, do it with open_bpipe()
     rather than popen.  Not yet tested.
07May07 
kes  Fix an ugly bug where the VolCatBytes were getting updated
     during a restore.
kes  Implement bconsole memory command that prints current memory
     usage, plus smartalloc dump.
kes  Clarify some error messages in backup, admin, and migrate.
kes  Shrink label dialog to smaller size.
kes  Invert Cancel OK buttons on restore to be OK Cancel.
kes  More strerror() to bstrerror() conversions.
06May07 
kes  Start implementing bstrerror() in place of strerror().
kes  Stripping path -- seems to work.
04May07
kes  Prevent door and port files from being restored (mostly
     Solaris stuff).
kes  Free an unreleased buffer in compat code.
kes  Change console Job name from *Console* to -Console- to eliminate
     Win32 filename problems.  Put Win32 path separator when creating
     Console file.  This fixes bug #846.
kes  Change berrno::strerror() to berrno::bstrerror().  Not yet full
     implemented.
kes  Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
     structure.
kes  Define b_errno_win32 on Linux to be zero so that it can be or'ed in
     to force Win32 error message.
03May07
kes  First cut strip path. The data should be passed to the FD,
     but nothing is done with it yet.
kes  Enhance the digest and signature routines in the crypto
     library to accept a JCR and to use it to print error messages
     so that they will go in the Job report rather than the daemon's
     messages.
kes  Simplify some of the verify signature code.
kes  Simplify a few of the alternative returns in the signature 
     code.
02May07
ebl  Use only POSIX regex instead of GNU regex in breg.c for
     File relocation. It fix broken freebsd compilation.
kes  Convert all other Dir files to use new ua class message 
     routines for bat.
kes  Tentative fix for missing digest signature in bug 807.
kes  Correct handle problem in new win32_ftruncate routine.
kes  Convert ua_purge.c and ua_update.c to use new ua class
     message routines for bat.
29Apr07 
kes  Correct incorrect installation of LICENSE in Win32 installer.
kes  Display LICENSE at the beginning of the Win32 install.
kes  Attempt to correct the need for the png files to be installed 
     for bat.
kes  Reapply my bat.conf install script in qt-console. I think I 
     editted bat.pro instead of bat.pro.in and it was lost.
kes  Apply CentOS patches someone sent me. Checks for /var/run/subsys,
     the /var/lock/subsys for subsysdir.  Also corrects typos in the
     doc.
28Apr07
kes  First cut update job.
kes  Correct configure to include qmake of src/qt-console directory.
26Apr07
kes  Make restore job yes/mod/no print in one command so GUI works.
kes  First cut implementing backup and restore client.
kes  Correct editing in Verify output that caused a seg fault.
25Apr07
kes  Insure that bat.conf is not overwritten during installation.
kes  Fix important bug in db_sql_query() in mysql.c.  It was introduced
     while I was implementing migration in March 2006 !
24Apr07
ebl  Cleanup file relocation, using char *RegexWhere instead of
     char *where + bool where_use_regexp
kes  Update some manpages and add bat manpage.
kes  Make a first cut at converting bacula.spec.in for bwx-console
     and bgnome-console.
kes  Apply patch from John Goerzen to add hostname as fourth argument
     to make_catalog_backup script.
kes  Fix typos I introduced into bsmtp.c
kes  Make pm_strxxx() routines handle input of NULL pointer. This
     is to protect from NULL pointers returned from SQL databases.
kes  Correct typo in bacula-sd manpage as pointed out by John Goerzen.
kes  Add more debug to FIFO code -- fix fifo regression test.
23Apr07
kes  Implement posix_fadvise in FD, and for reading spool files in SD.
kes  Add thread timer to bnet_connect() to break from OS if wait time
     expires.
22Apr07
kes  Update Win32 build to include new files, new symbols, and    
     renamed files.
kes  Implement socket level heartbeat (tcp_keepidle)
ebl  Commit File relocation patch
kes  Make bat have 'make install' target.
kes  Warn during install if old gnome-console binary found.
kes  Warn during install if old wx-console binary found.
kes  Add -8 option to bsmtp command line to add content type utf-8. 
     Fixes bug #809. (Character coding problem in bsmtp).
kes  If < is found in target (from, to, cc) then do not enclose the
     target in < >  in bsmtp. Fixes bug #772  (malformed address).
kes  When printing certain items in dbcheck, stop after 300000.
     Fixes bug #822. (dbcheck loops).
kes  Incorrect status in Dir after waiting for mount with poll set.
     Fixes bug #825.
21Apr07 
kes  Extend idea of Prefer Mounted Volumes to mean a volume about
     to be mounted.
kes  Print waiting to reserve a device every 5 mins.           
20Apr07
kes  Don't call close_part in label.c if tape and relabel.
kes  Don't free volume if busy in close() -- should help with
     bug 801.
ebl  Fix #824 RunScript bug (After script could be execute twice)
     Now, Before Script can use RunsOnSuccess and RunsOnFailure options
     By default (like before) RunsOnSuccess=true and RunsOnFailure=false
     Add a regression script to test RunScript
19Apr07
kes  Correct usage of MTIOCLRERR ioctl for clearing persistant errors
     on Solaris.
18Apr07
kes  The bgnome-console (gnome-console) and bwx-console (wx-console) are
     deprecated. No additional bugs will be fixed, and they will be dropped
     in a future release (probably 2.4.0).
kes  Change name of wx-console to bwx-console to make it more Bacula
     unique.
kes  Change the name of gnome-console to bgnome-console to make it
     more Bacula unique.
14Apr07
kes  Some time in March, a Feature Request with patch from Jorj Bauer
     <jorj@seas.upenn.edu> was committed by Landon (with my approval).
     It implements:
     The ability for the director to validate a Client (FD) CN against
     an arbitrary set of patterns rather than the hostname, with
     A new 'TLS Allowed CN' set of directives which are implemented
     in the Client resource.  Then pattern matching is used in place
     of hostname matching against the Certificate's CN. As an example, we
     have certificates which (a) use a local CA, and (b) have a CN of the
     form client_123.
kes  Add new/changed entry points to Win32 build
kes  Create unaccepted-projects for projects that are not accepted.
kes  Simplify locking in the reservations system.
kes  Add more debug code in reservations.
kes  Make sure error condition on reserving a volume is handled correctly.
kes  Correct handling of volume_in_use.
kes  Correct handling of initializing a device.
kes  Move handling of broadcasting releasing a device into release_device().
kes  Correct attaching dcr to dev so that it is only done if device
     is properly initiated.
12Apr07
kes  Locking debug level tweaks in SD.
kes  Tweak new Volume code.
11Apr07
kes  Add exec external-command [wait-seconds] to bconsole. This
     executes the external-command.  Note! normally external-command
     should be enclosed in double quotes.
kes  Turn the .die command on only if DEVELOPER is defined -- i.e.
     it should normally be off in a production system.
10Apr07
kes  Implement die command for SD so that we can force it to dump.
kes  Implement SD lock debug code.
kes  Implement new algorithm for keeping Volume list in SD.  It
     is now owned by the device.
04Apr07
kes  Implement new code for freeing in use volumes that should 
     resolve if not all, some of the problems of multiple drive
     tape conflicts described in bug 801.
03Apr07
kes  Fix gui/bacula-web/images files in svn.
kes  Turn on FreeBSD/OpenBSD code to set EOT model on tape.
02Apr07
ebl  Fix a bug in batch mode (in string escape)
kes  Correct migration prune SQL typo that crept in in a    
     recent 2.1.x change.
01Apr07
kes  Move bnet_despool() into class in bsock.c
kes  Modify job report to include director name and Build OS.
kes  Move drop root privilege and check_catalog() before fork.
kes  Add update database scripts (version 9 to 10) to updatedb directory.
31Mar07
ebl  Check size and age of each file after its backup to see if
     it has changed during backup, if 'checkfilechanges' is set.
     The FD will do an extra check (stat(2)) after
     each file backup. mtime, ctime and size are compared with
     'before backup' information. If time or size mismatch, an
     error message will be generated. You must upgrade FD to use it.
30Mar07
kes  Make database name and user configurable
     --with-db-name=xxx --with-db-user=xxx
kes  Add back database type to message.c for debugging.
29Mar07
kes  Implement dir_sql() which issues an SQL query.
kes  Modify bat medialist to use dir_sql() and do some minor C++
     formatting as well as eliminating a number of pointers, simplifing
     the code.
28Mar07
kes  Fix some of the mtx-changer grep commands for tape label readers.
kes  Convert a number of bsendmsg into the appropriate send/warning/error
     message class calls.
kes  Suppress the using database message in the .sql command.
kes  Correct an incorrect bnet_tls_client prototype -- patch from Martin.
27Mar07
kes  Add context menu for floating a window.
kes  Some minor cleanup and name changes in qt-console
kes  Add doing mt setblk 0 in Win32 mtx-changer.
kes  Apply Martin's bug fix to move definition of ENODATA for 
     FreeBSD to bsock.c
ebl  Add a BUSY handler to sqlite to be able to use multi_db = 1 with
     sqlite2 and sqlite3.
26Mar07
kes  More pruning cleanup.
kes  Turn on wait_for_drive by default in mtx-changer.
kes  Turn on Batch insert code by default as it now passes regression.
kes  Add ./configure --enable-bat to enable building of Bat.   
     No install yet though.
25Mar07
kes  Implement a new .sql command for bat.
kes  Implement code to turn off pruning in obtaining the next volume.
     Pruning is turned off for the status dir command, but turned on
     for SD requests and for the list nextvolume command.
24Mar07
kes  Correct Qmsg() that was not updated correctly when committing a
     previous change (probably the recent TLS patch).
23Mar07
kes  Write new subroutine is_volume_purged() that explicitly checks
     if the Volume is purged, and if so marks it as such. This should
     resolve problems reported about needing to mount twice to recycle
     volumes.
kes  Rewrite pruning algorithm to do more work in the SQL engine, and
     to pass a list of JobIds to be deleted to SQL.  Also, minimize the
     amount of duplicated code.     
kes  Do volume pruning only for the Media Type desired (reduces pruning time
     if multiple Media Types are in the same pool).
kes  Implement more detailed info in the Job report for the Bacula version
     and architecture.
kes  Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
     ua_purge.c.
ebl  Add bbatch tool to bench database and insert mode.
     Fix sql quote stuff in batch mode
     Fix sql stuff for mysql
22Mar07
kes  Correct problems with am/pm scheduling. Fixes bug #808.
kes  Implement new prunning code that prunes up to 1000 jobs at
     the same time.  The same technique can be applied to a number
     of other prune/purge subroutines.
kes  Add an insanity check when starting a new tape job to ensure
     that the tape position has not been changed. If so fail the
     job.
kes  Fix Win32 build for dlls to add the folllowing:
     src/lib/bsock.c -- new file with new entry points
     src/lib/dlist.c  -- new entry points
     src/cats/sql_create.c -- new entry point
     src/cats/sql_cmds.c -- new DATA item exported
21Mar07
ebl  batch mode cleanup bscan-test is ok now.
kes  Implement SD code to check length of disk volume before appending.
18Mar07
kes  Correct return status on db_batch... routines.
kes  Add call to db_write_batch_file_records() to migration code.
ebl  Fix AfterJob timing
kes  Move the checking of the database in initializion of the Director
     to after we drop privileges.  This avoids the need for both root
     and bacula access to the DB.
kes  Correct a misplaced variable definition in src/filed/backup.c
kes  Correct how the new batch insert db_create_attributes_record()
     uses the arguments.  Caused a seg fault in bscan.
kes  Implement lock() and unlock() methods in DEVICE class.
     Implement block() and set_block(xx) methods in DEVICE class.
kes  Modify bnet_connect() so that it uses time() to check for the
     wait time expiring (on some OSes, some system calls may not
     return immediately).
kes  Modify Verify to obtain the previous JobId when it is actually
     running rather than at schedule time (as it was in 1.38.x).     
kes  Fix src/job.c to handle MaxWaitTime correctly.  This should
     fix bug #802.
kes  When checking pid in pid file, continue running if the pid is
     the same as ours. This occurs on IRIX after a system crash.
     Fixes bug #797.
10Mar07
kes  Extend new GUI API.
kes  Make the ua structure a class, and implement send_msg(),
     error_msg(), warning_msg(), and info_msg().
08Mar07
kes  Apply fix from for building wx-console on the Mac from
     bug #798.
kes  Implement new select mechanism for GUI programs.
kes  Reorganize initialization of stackedWidgets in bat.
07Mar07
kes  Add updated nagios plugin supplied by Christian Masopust.
05Mar07
kes  More bat implementation.
kes  File migrate bug with Pool Occupancy using mediaid instead
     of jobids.  Fixes bug #795.
kes  Fix orphaned buffers in filed backup and verify due to
     crypto buffers not freed during errors.  Fixes bug #789.
kes  Extend new GUI api code to tree commands.
kes  Ensure that tree and dot commands check console ACLs.
kes  Permit marking directory with trailing slash.
kes  Allow 20 console connections (instead of only 10).
04Mar07
kes  Add smartctl call to bacula-sd.conf as an example of getting
     tape alert info.
02Mar07
kes  Modify jobq.c to let simultaneous restore jobs run. This may 
     cause them to fail if they cannot get a drive.
kes  Add Client Connect Wait to Storage daemon to permit users to
     modify the time the SD waits for a FD connection.
29Feb07
kes  Correct virtual changer check which was backwards. This caused
     volumes to be unloaded into slots already occupied.
28Feb07
kes  Apply Command ACL filter to JobId list in restore command.
kes  Correct typeo in var.c patch.
27Feb07
kes  Don't let Bacula prune File or Job records for the current Job.
kes  Fix variable substitution pad + inc bug reported (with patch)
     in bug #791.
26Feb07
kes  Correct SQLite log table index as reported by Luca Berra.
24Feb07
ebl  fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
22Feb07
kes  Begin implementing new comm signals for API.
kes  Fix a few places in lib/message.c where the open fd may 
     not be zeroed.
kes  Continue implementing lib/bsock.c (real class).  Make jcr,
     who, host, and port private. There are new methods to access
     them for non-class use. This required touching a number of files.
21Feb07
kes  Add LANG=C to autoconf/randpass so it works with languages other
     than English.  Fixes bug #788.
20Feb07
ebl  Revert ClientRunBeforeJob to old position as in 1.38.X.
     This fixes bug #780
     You will not be able to generate Include/Exclude list any more.
     It will be fixed soon.
     If you want to use this, you can apply
     trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
19Feb07
kes  Restore of sockets created false error messages because Bacula
     no longer restores sockets, but the code was still trying to
     set the attributes on a non-existent file. Reported by a user.
ebl  finish RecyclePool feature
     Media will takes Pool.RecyclePool
     when moving from Scratch to a Pool or when user will do
     update volume=xxx frompool
     To use it, add RecyclePool = aPool to your Pool resource
        Pool {
                Name = Default
                RecyclePool = Scratch
                ...
        }
     TODO: update manual
kes  Expand new BSOCK class adding signal() and new BNET signals.
kes  Begin enhancing the dot commands adding a new API function
     that returns more information and will make it easier
     to interface to the Director from a program.
18Feb07
kes  Make DEVICE fd private. Its new name is m_fd, and can be
     obtained with dev->fd() outside the class.  This is the
     first of many DEVICE members to be made private.
kes  Implement Michael Renner's idea on having a virtual disk
     changer. I made some minor modifications (e.g. I did not
     implement the Virtual Changer directive, but simply set
     the Changer Command to an empty string.
17Feb07
kes  Implement a BSOCK send() method that writes the whole record
     in a single write() request rather than in two.
ebl  add update volume=xxx recyclepool=yyyy
     volume takes recyclepool from pool when using update volume=xxx from pool
16Feb07
kes  Fix encryption deblocking bug, which caused some restored files
     to be truncated. This fixes bug #763.
kes  Add FD event sequence order prepared by Eric -- for RunScripts.
kes  Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
13Feb07
kes  Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
ebl  Use btime_t instead of uint64_t in media patch.
11Feb07
kes  Optimize the use of the database a bit in the Status dir command.
     Only open it when needed, ensure that if any previous database
     was opened, it is closed.
10Feb07
kes  Correct VolCatBytes bug from media patch.
kes  Apply patch from bug #612 by Rudolf Cejka to speedup pruning
     in the case of orphaned records.
kes  Modify dbcheck to handle orphaned JobMedia, Path, Filename,
     and File records in 300K chunks to be more efficient. This
     idea came from Juan Luis Frances (if I remember right).
kes  Apply Eric's scratch patch that moves a purged Volume to
     the RecyclePool.  Question: how is RecyclePool set? what
     happens to the ScratchPool?
kes  Apply Eric's media patch that collects read/write media
     times as well as byte counts.  This patch requires a
     simultaneous upgrade of the DIR and SD.  Note, there
     should be some way to turn off timing. I'm not sure
     times are in Bacula units.
kes  Apply Eric's batch-insert patch.
09Feb07
kes  Update projects list.
08Feb07
kes  Implement Include/Exclude file lists in FD as dlists using
     the new dlistString class. This permits efficiently having
     large include/exclude lists and completes project Item 25.
kes  Fix dird/ua_cmds.c so that a cancel command checks if the
     console is authorized to cancel the job.  This fixes bug 
     #767.
kes  Modify SD so that the VolCatJobs medium record is updated
     at the beginning of a Job rather than the end.  This
     fixes bug #775 where exceeding MaxVolJobs caused jobs
     to fail.
kes  Added a mutex around getting and setting Volume information
     so that multiple simultaneous jobs will single thread.
07Feb07
     Switch to using Subversion
kes  Remove src/pygtk-console/ from configure
06Feb07
kes  Delete src/lib/btree.c from win32 build, then add rblist.c
     plus the entrypoints.
kes  Apply patch supplied that corrects debug print
     in canceling jobs for max run time.  Supplied as
     part of bug #621, which was previously fixed.
05Feb07
kes  Test on job_canceled() and sd_msg_thread_done inside
     loop starting the message thread to avoid a race condition.
     Fixes bug #771.
kes  Remove rl_catch_signal from console.c as it conflicted
     with the header definition. Fixes bug #765.
ebl  Fixes bug #766 about RunsOnClient = Yes (case sensitive)
04Feb07
kes  Clarify some stored/acquire messages to indicate if the
     problem is with read or append.
02Feb07
kes  Fix memory leak with storage ids in cats/sql_get.c
kes  Terminate watchdog earlier to avoid reference to released
     memory -- reported by Jason Austin.
kes  Move closing the database from jobq.c to the director daemon
     termination routine. This fixes memory leaks for shadow jobs
     (i.e. migration jobs).
kes  Free up the unique jobid chain items in migrate.c.  This fixes
     a memory leak problem.
kes  Convert some ugly looking for statements to use foreach_alist
     in findlib/find.c.  This will facilitate converting the structures
     to use dlist (for large include/exclude lists).
kes  Fix a bug in the btree.c and btree.h routines, then rename them
     rblist and add them to be built in src/lib.  Include some new
     methods written by Rudolf Cejka that make the code more readable
     (hides some of the ugly casting).
kes  Add set_next() and set_prev() methods which make the code much more 
     readable. Also add a new dlistString class that facilitates storing
     strings in dlists.  To be used in the large include/exclude lists.
kes  Make some trivial modifications to lib/tree.h that use rblist
     rather than dlist for storing the tree links. This was suggested
     by Rudolf Cejka.  The result of this is that the restore tree now
     uses red-black binary trees rather than simple linked lists. This
     should give rather dramatic speed improvements for directories
     contining large numbers of directories/files (more than 10000).
28Jan07 
kes  Fix maxruntime bug #621.
26Jan07
ebl  Implement the include JobID in spool file name project.
kes  Reorder projects file in order determined by Jan 2007 vote.
kes  Implement item #12 on project list -- quick release of FD by
     the SD.
kes  Fix open of SQLite3 db where user does not have write permission
     so that DIR does not crash. Fixes bug #761.
25Jan07
kes  Add back missing @ in Win32 Makefile.
kes  Change 'Device not configured to autolabel' from INFO
     to WARNING.
kes  Fix jobq.c to restart failed jobs when Reschedule Times = 0 
     which should restart an indefinite # of times.
kes  Fix configure --help to print --with-mysql[=DIR]. Same for
     other DIR specifications.
23Jan07
rn   Fix msvc build problems. Fix bacula.dll exports for msvc build.
     Fix path quoting in SQLite scripts.
     Fix problems with SHGetFolderPath.
19Jan07
kes  Create patches/2.0.1-restart.patch. Fixes bug #755.
18Jan07
kes  Fix Job restart on error bug that promotes an Inc to a Full
     backup.  This should fix bug #755.
kes  Add qt-console and first cut of code.

Version 2.0.1
12Jan07
kes  Fix Bacula->Documentation link on Win32 to point to index.html
     instead of bacula.html. Fixed bug #750.
kes  Return JobId in db_get_job_record() when JobId==0. This should
     fix bug #741.
kes  Do not release source pointers when restarting a failed job.
11Jan07
kes  Add dynamic dll entry point for SHGetFolderPath to Win32 code.
     This *should* fix bug #747.
kes  Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
     bug #742.
09Jan07
kes  Modify USTORE constructor to set an empty store_source string, 
     and don't copy the store_source string in a cancel.  Hopefully
     this will fix Arno's seg fault, bug #744.
kes  Add back code to disable conio in configure. Fixes bug #743.
kes  Correct the Options scanner in the FD to correctly handle  
     SHA1 option, which was eating the next option.  Reported by    
     Sebastien Guilbaud.
kes  Add code to indicate when the SD is spooling, spool wait, and 
     despooling as requested by Alan Brown.

Version 2.0.0 released: 4 January 2007