1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
31 separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
36 kes Fix seg fault in Dir during estimate command with no level value
37 given. This fixes bug #1140.
39 kes Add message to migration job when the target job is already migrated.
40 This closes bug #1129.
43 kes Raise some restore debug levels.
44 kes Replace off_t by boffset_t where ever I found it.
46 kes Define a machine dependent ioctl request type for use with
49 kes When a migration job actually runs, re-check the Job record
50 and skip if the job is already migrated. This should
51 significantly reduce the problems with bug #1129.
53 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
54 turn off glibc checks that prevent getting good dumps.
55 kes Implement console 'wait mount' command. Doesn't yet work.
56 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
57 kes Break the do_swapping into do_unload, do_swapping, and
58 do_load. It is much more logical that way.
59 kes Implement a set_dcr_from_vol subroutine in acquire.c for
60 reading volumes. This allows the dcr to be refreshed after being
61 zapped when the wrong volume is mounted.
62 This should fix bug #1126 -- During multiple tape restore, bacula
63 does not ask for physical tape change, but rereads same tape
65 kes Apply patch submitted for bug #1107 with a small modification.
66 This fixes a bug where bcopy copied too many records.
67 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
69 kes Make the default bat restore Pool be Any. This fixes bug #1118.
71 kes Remove debug statement that crashes the SD at the end of
72 a tape during restore. Fixes bug #1125.
74 kes Implement Win32 bat changes made to Branch-2.4
76 kes Tweak separator command in console to start disabled and
77 allow defining no separator character. Also make code a
78 bit more fault tolerant.
79 kes Make btraceback write the traceback to the working directory
80 before attempting to mail it.
81 kes Add a RFC to Projects.
83 kes Attempt to implement a kludge to make Qt work with bat
85 kes Setup rstorage correctly. Virtual backups are working.
87 kes Move setting JobLevel and JobType into a method, which should
88 allow completing Virtual Backups.
89 kes Fix verify jobs to work again.
91 kes Virtual Backup tweaks -- it is close to working.
93 kes Ensure that SD tried to mount a volume not in an autochanger
94 at least once before asking for operator intervention.
95 kes Make SD aware of Virtual Backup jobs.
96 kes Add VirtualFull for bat.
97 kes Changes to get read storage correct for Virtual Backup.
99 kes Remove old code from label.c
100 kes Split display_display_info() out of write_bsr_file()
101 kes do_vbackup_init() working -- i.e. bootstrap file built.
102 kes Change Bacula trademark owner from John Walker to Kern Sibbald
103 kes First non-working cut of vbackup
104 kes Correct FD heartbeat code to use volatile variable accessed by
106 kes Zero thread id with memset if on Win32 in case it is a struct.
107 kes If cannot create JobMedia record, continue to try to write eof
108 and clean up in block.c
110 kes Add code to interface OpenSSL to new Win32 pthreads code which
111 used a structure for thread_t.
113 ebl tweak bat for win32 compilation
115 ebl Remove tokyo cabinet from the source
116 ebl Update configure/autoconf to support berkeley DB
117 ebl Add a sort to db_get_file_list() to improve bsr construction time.
119 kes Add a mtx-changer.conf file that is not overwritten during
120 an upgrade. It fully configures the mtx-changer script.
121 kes Clear in-use bit on vol when unused while swapping.
123 kes Remove sleep at end of ./bacula
124 kes Clear hash packet for hardlinked files correctly. This corrects
125 a long standing bug where hardlinked files selected individually
126 would occasionally not be restored.
128 kes Apply Eric's patch to ensure that autoprune does not return
129 a Volume not in the autochanger unless requested to do so.
130 kes Correct bat restore display of multiple drives. This fixes
132 kes Do find_a_volume() each time an unload is done. This
133 fixes the failure of maxvol2-test.
135 kes Add some SD debug code.
136 kes Do find_a_volume() each time an unload is done.
137 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
138 and adds --with-db-port to ./configure.
139 kes Use Qmsg() in job.c watchdog callback.
141 kes Release main control rwlock if ABORTing.
142 kes Make watchdog connect timeout queue messages rather than sending
143 directly to avoid lock conflicts with the real thread.
144 kes Add const char in dbd.c to avoid compiler warnings.
145 kes Fix python compiler string warning. Note, IMO the GNU C++
146 compiler guys have made a *very* bad change to their compiler.
147 They now force all strings to be 'const' unless you explicitly
148 cast them, which is extremely ugly and ruins nice code as well
149 as creates a lot of useless work.
151 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
152 mt. This fixes bug #1116.
153 kes Add const in python files to reduce compiler warnings.
154 This may have to be backed out because of later compiler
156 kes Fix failure of 2drive-concurrent-test. Always read label;
157 clear_unload() only after drive is defined in acquire_for_read().
159 kes Generally clean up the manual tape loading code. The main
160 conceptual change is that when a volume is marked to be unloaded,
161 its volume name is retained, and it is only marked as unloaded
162 when either the autoloader says it is unloaded or another tape
163 is read on that drive.
165 kes Add debug code and refactor subroutine in stored/mount.c
166 kes Fix format problem in bscan output reported in bug #1105.
167 ebl Fix get_next_volume_for_append logic with autochanger
168 - use pruned volumes if found
169 - don't reset the inchanger flag after getting a recycled volume
171 Fix recycle_oldest_purged_volume to take InChanger flag in account
173 ebl Add mmap/unmmap implementation for tokyodbm under win32
175 kes Make first step toward eliminating globals from config
176 scanning. Also should be a workaround for FORTIFY_SOURCE
177 GNU C bug -- fixes bug #1042.
179 kes Apply duplicate job tests to restarted jobs.
180 kes Copy more data when restarting a job so that run
181 overrides are kept. This should fix bug #1094.
183 kes More word alignment cleanup.
184 kes Fix bug where SD did not ask operator if the device could not
185 be opened. Reported by Eric.
187 kes Add dbuser to DIR conf file (replaces user).
188 kes Add --with-db-password to ./configure
189 kes Fix regress to handle db_password.
190 ebl Add new "status storage slots" that list autochanger
192 ebl Update vtape driver to compile only under Linux.
193 ebl Fix a bug when restoring with a wrong mediatype.
195 kes Eliminate ints from conf files and structures to avoid
196 word alignment problems
198 kes Fix bug reported by Scott Barninger where the bacula script
199 refers to scripts in the wrong directory. Needed to meet the
200 requirements of recent FHS location changes.
201 ebl Disable vtape for FreeBSD.
203 ebl Modify disk-changer to check if slot contains something before
206 ebl Fix vtape on win32 and debian.
207 ebl Fix autoselect patch (cause segfault).
209 ebl Fix autoselect option broken for a while. Fix #1089. Need some
210 work with StorageId to be able to use a particular drive in a
213 ebl Rename vtape to vtape.
214 ebl Update vtape driver.
216 ebl Modify vtape driver to avoid sparse file.
217 kes Add make clean of qt-source directory during ./configure
218 kes Store last block number written to tape in DEVICE and
219 use it for testing for correct last block on EOT.
221 Release Version 2.4.0:
225 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
226 This fixes bug #1095.
228 kes Add create_postgresql_database.sql to Win32 installer. Should
229 fix problem reported by Juilio Monteiro.
230 kes Get correct slot when auto unloading a device. This fixes bug
233 kes Fix multiple media restore.
234 kes Make DEVICE Slot private and access it via a method.
235 Allows better control over when it is set and cleared.
236 kes Fix possible seg fault if SQL error.
238 kes Add Martin's fixes to argument scanning for the estimate
239 command. This fixes bug #1093.
240 kes Add debug code to SD.
241 kes Fix renaming a Volume, which used the wrong Volume name.
243 kes If operator has rewind tape, print warning, release tape and
244 try once more. If tape is positioned somewhere, something went
245 wrong, so mark the tape in error and try once more. Previously
246 this error was fatal, now it produces an error message.
247 kes Ensure correct volume name displayed during restore
248 kes Ensure that Volume is mounted for restore.
250 kes Fix a few more Coverity reported problems.
252 kes Apply Allan Black's status dir job count patch.
253 ebl Add information about IMPORT/EXPORT slots in mtx-script.
254 kes Enhance a couple of SD debug messages.
255 kes Tweak unload flag setting and ensure it is set during swap.
257 ebl Fix #1091 about bad output in estimate command.
259 kes Modify autochanger locking to attempt to avoid race
261 kes Make sure device not busy before doing label command.
262 kes Display open() errors except when polling. Previously too
263 many were suppressed. This should fix bug #1070.
264 kes Fix Win32 reparse points. Bacula will not recurse into any
265 reparse point directory, including mount points, unless the
266 directory is explicitly mentioned at the top level (same as
267 with Unix). A file that is linked to another file will be
268 backed up -- much as Unix does for hardlinked files.
269 This fixes bug #1041.
271 kes Remove double quotes from ChangeLog and ReleaseNotes
272 kes Remove StorageId test when pruning and recycling (Eric's changes).
273 kes Remove old form of locking when getting volumes -- causes deadlock.
274 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
275 the name unique and to eliminate compile time error.
276 kes Add accurate.o to Win32 FD Makefile
278 kes Fix cats dll build on Win32 after db_update_job_end_record
279 calling sequence change.
280 ebl Switch to tokyo dbm instead of htable in accurate code
281 ebl Include tokyo dbm to bacula source tree
283 kes Fix buffer overruns detected by Coverity.
285 kes Tweak joblog display.
287 kes Implement --without-qwt
288 kes Fix layout of restore tree dialog
289 kes Add configure bat QWT libraries, so that bat can be built
290 with or without the QWT libaries.
292 ebl Add dummy tape driver for regression tests.
293 kes Make sure we unload the right slot when swapping.
295 kes Add debug times, reduce size of two-pool-changer test
297 ebl Tweak autoconf scripts for vtape
299 kes Improve SD reserve debug code.
300 kes Testing an improvement to free up volumes no longer in use.
302 kes Rework SD acquire for read to handle autochanger Volume
304 kes Implement regression that explicitly tests swapping a Volume
305 from one drive to another.
306 kes Enhance disk-changer to detect most error conditions.
307 kes Fix SD code so that it properly swaps a Volume between drives.
308 This fixes bug #1083.
310 kes Apply libdbi patch from Joao Freitas for regress and for
311 Bacula trunk. Regress now works with libdbi. Nice.
312 kes Apply .nobackup patch from bug #1077 submitted by
314 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
315 name into jobs cloned via the run directive.
317 kes Prevent a Volume that is being swapped from being freed from
318 the volume list. This will most likely fix, at least partially,
320 kes Fix strippath so that it does not get a buffer overrun and crash FD.
321 This fixes bug #1078.
322 kes Remove 50 millisec wait in SD that broke debugger.
323 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
324 that a job may run, counted from when the job was scheduled.
325 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
326 a job may block waiting for a resource, counted from when the job starts
327 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
328 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
329 that implements multiple commands per line in the console when using
330 readline. Modify the default to use a semicolon as the command separator.
332 ebl Fix SQL query in migration code.
333 ebl Make accurate mode with hash disk pass regression tests
335 ebl Implement first cut of accurate backup with hash disk.
337 kes Force unload of volume when wrong volume mounted in SD.
339 kes Fix bat seg fault at termination.
340 kes Add Bacula generated version to bat about box.
343 kes Experiment with allowing multiple read jobs.
344 kes Move final volume swapping code to DCR method and
345 call it from acquire_for_read().
346 kes When wrong volume is mounted during read, unload_autochanger.
348 kes Integrate the libdbi changes from Joao Henrique Freitas
350 kes Stop searching for Volumes in SD askdir if DIR returns the
351 same volume name twice in a row.
352 kes Close bat console windows first to eliminate error message
355 kes Tweak the swap Volume from one drive to another code so that
356 it now seems to work.
357 kes Resolve several problems with recycling that broke the new
358 code (these problems are in 2.2.9 as well).
359 kes Remove the volume lock when calling the sysop code.
360 kes Don't mark a reserved volume with no writers as unused otherwise
363 kes Rework class structures for VOLRES, DCR, and DEVICE to make
364 the method names a bit more logical, and for more logically
365 handling the responsibilities.
367 kes Remove redundant code in terminating the scheduler that just
368 causes a seg fault in many cases.
369 kes Cleanup releasing a volume and make it a DCR method.
370 kes Improve algorithm for detecting pre-reserved volume and
373 kes Tweak volume swapping code so it works.
374 kes Correct name overloading in mount.c
375 kes Replace released flag in VOLRES with reserved and add access
376 methods for the VOLRES class.
377 kes Prevent volume from being released while being swapped.
378 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
380 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
382 kes Refactor parts of stored/mount.c
384 ebl Add sanity checks for VolWriteTime and VolReadTime
385 ebl Take care of bad clock changes while computing VolWriteTime
386 and VolReadTime. This should fix or limit #1066
387 kes Correct error string numbers in dird/catreq.c
388 kes Restructure reserving, acquiring, and mounting volumes. Calls to
389 autochanger are deferred for mount.c -- simplifes the code.
391 kes Do not prune any running job. It just fails the job.
392 kes Lock the volumes when changing dev->reserved_device and marking
393 the volume unused otherwise the device can get reserved by
394 another job before the volume is released, thus blocking it.
396 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
397 kes Fix bug #1063, reuse of freed ptr in list nextvol.
398 kes Release regex compile buffer in filed/job.c
399 kes Add proper type of const char in sql_create.c
400 kes Turn off debug in daemon termination routines
401 kes Move free_volume_list() before devices are freed in stored.c
402 kes Fix reference to uninitalized stack variables in bregex.c.
403 This should correct bug #1067.
405 kes Fix possible seg fault in SD when freeing a volume entry.
407 kes Implement unload_dev() before swap device.
408 ebl Add statistics prunning with option and menu
409 kes Separate unload_dev() from unload_other_device() in autochanger.c
411 kes Apply patch from bug #1069 that corrects spurious error messages
412 when ACLs enabled on SGI but no ACL exists.
413 ebl Fix small segfault in bacula-sd when debug level is 500
414 kes Modify run_program() and run_program_full_output() to use
415 call by reference for the results string. This corrects a long
416 standing problem where the address of the string may be changed
417 in the subroutine but not in the calling program.
419 kes Re-enable code to remember last volume mounted on a non-tape
421 kes Add patch supplied in bug #1068 that fixes a SD crash when using
422 a Virtual autochanger.
423 kes Generate correct JobMedia records during spooling/despooling when
424 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
425 <tih@hamartun.priv.no> for excellent analysis and testing.
427 kes Tweak hash algorithm for htable using Martin Simmons idea
428 for doing a circular shift.
429 kes Remember what volume is in VTLs (previously turned off for
431 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
432 pointed out some problems in creating JobMedia records during
433 spooling with concurrent jobs. Fix the problem by updating the
434 start file position before despooling and generate a jobmedia
435 record at the end of despooling.
437 kes Fix handling of JobMedia records during spooling and when a
438 Volume is changed without actually writing data to the Volume.
440 kes Rework certain SD locking based on gdb tracebacks of deadlocks
441 sent by Eric. This code now uses only the volume_lock() rather
442 than the reservations lock when at EOM and acquiring a new
444 kes Ensure only one exit point in several subroutines.
446 kes Implement bsock code to permit locking. Use the new code in Verify
447 in the FD to prevent the heartbeat thread from disrupting the Verify
448 data sent to the Dir.
449 kes Modify SD locking to eliminate locking the reservations system from
450 outside the system. Use the volume lock when getting media data
451 and reserving a new volume at end of media.
452 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
453 when SD starts are not locked into place.
455 kes Fix error compiling runscript code on 64 bit machines.
456 kes Tweak Win32 mount point code.
457 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
458 cleared giving bad file estimate).
459 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
462 kes Keep Schedule run lists in order as suggested by
465 kes Implement autostart scripts for Debian.
466 ebl Implement upgrade catalog scripts.
468 ebl Apply jobstat patch for long term statistics. Have to implement
469 purge stats command and upgrade scripts.
470 kes Fix mtx-changer.in for broken Debian mt program.
472 kes Fix large number of JobMedia records reported by Eric Bollengier.
474 kes Apply doc fix from bug #1062.
475 kes Resolve crash and improper restore wx-console Win32 restore
476 GUI. Fixes bug #1065.
477 kes Update Win32 wxWidgets to latest version.
478 kes Attempt to do correct handling of Win32 mount points. Should
480 kes Fix Win32 FD backup/restore memory leak due to improper termination
481 of BackupRead/Write. This fixes bug# 1038.
483 ebl Reduce memory usage for accurate backup, working only with ctime
484 and mtime. (not all Lstat field)
485 About 40MB for my Linux system (400.000 files)
487 kes Add dcr->reserved_volume flag that allows us to release a volume
488 even if it is not vol->released. This allows maxvol2 to work when
489 Volumes expire and we are already writing to the device (i.e. a
490 volume is pulled out from under us by another job terminating after
491 we reserve the drive).
493 ebl Permit multiple command/console per runscript definition.
494 RunScript { command = /bin/true ; command = /bin/false ... }
495 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
496 (restart an application) just after the VSS snapshot on windows.
497 kes Don't zap dcr values during release_volume() as they might
498 have the next Volume to be mounted.
499 kes Fix AIX prototype.
501 kes Second cut of drive switching during backup.
504 kes Update Win32 version of wxWidgets to most recent version.
505 kes Tweak Copy job details.
506 kes Rework dir_find_next_appendable_volume to make a bit more effort
507 to find a suitable volume before giving up.
509 kes Make ask_sysop_to_create... to return if waken from wait.
510 This helps get out of blocked conditions.
511 kes Experimental implementation of switch_device in reservations.
512 kes Implement FD version to allow easier protocol changes.
513 kes Add Plugin Options string -- not yet passed to FD.
514 kes Implement PluginOptions ACL.
516 kes Attempt to correct problems with restores with autochangers and
517 use counts going negative
518 kes Rework SD status command and implement API for bat. Implements
519 header, runing waitreservation, devices, volumes, spooling,
520 and terminated status keywords.
521 .status storage=xxx <keyword>
522 kes Clarify TLS error message by adding double quotes around name.
523 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
524 kes Pass jcr to tls routines so debug messages can be handled better.
525 kes Rework jobq resource allocation code, and possibly fix a bug
526 that caused reference counts to get out of sync.
528 kes Rename fd/dir plugin to use Bacula standard underscore.
529 kes Plugin work -- bring dir up to fd level.
530 kes Start implementation of VTL code
531 kes Fix Win32 build after adding new cats subroutine.
533 kes First cut at Duplicate Job implementation.
535 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
536 kes Start PluginOptions string, and refactor a bit of ua_run.c
537 ebl Apply Allan patch that permit to reset recyclepool.
539 kes Test patch -- possible fix or improvement for bug #1053
540 kes Refactor FD and SD status commands to permit new API code in
541 SD, and to fix Win32 build.
542 kes Win32 build is now working.
544 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
545 some ideas in patch from Scott Bailey.
546 kes Begin implementation of duplicate Job control.
547 kes Fix some of Win32 build after recent additions.
548 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
549 which causes the FD to detect whether or not the OS has the
550 honor no dump bit (*BSD systems), and if so, to skip backing up
551 any file with this bit set. The feature is enabled by setting
552 'honor no dump flag = yes' in the Options section of a FileSet.
554 kes Correct po warning message with datarootdir
555 kes Implement more code in dird.c to put configuration parsing in
556 a class rather than use globals.
557 kes Restructure SD status command for implementation of bat API
560 kes Suppress incorrect 'Will not descend from x into y' messages.
561 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
562 daemon globals used by parser.
563 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
565 kes Fix free of plugin_list when none exists.
567 ebl Apply accurate project patch.
569 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
570 on non-mempool object)
571 kes First cut of converting FD .status to work with bat API.
573 .status client=XXX header
574 .status client=XXX running
575 .status client=XXX terminated
576 kes Implement first cut of Copy Job.
577 kes Implement Catalog in Pool resource. It overrides catalog specified
578 in the Client resource.
580 kes Apply patch (with some difficulties) from Joao Henrique Freitas
581 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
583 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
584 ftruncate() actually works. In the case of some (cheap) NAS devices,
585 it does not, and so recycling NAS Volumes does not work. The code
586 simply unlink()s the file, then recreates it. This fixes bug #1011.
588 kes First incomplete cut of big malloc blocks for htable.
589 kes Tweak plugin code.
591 kes Plugin debug code + tweak a couple bat dialog layouts
593 kes Fix creating first JobMedia record during Migration to include
594 proper index. This caused slow restores of migrated jobs.
595 kes Temp fix to plugin name file_index.
596 kes Bacula backed up and restored a MySQL database.
598 kes Implement plugin restore.
599 kes Implement parsing of db_driver to give db_type index.
601 kes First cut of plugin restore code.
602 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
603 and do not strip paths on symbolic links.
604 kes Set catalog backup database and user name from values specified on
605 the ./configure line.
606 ebl Fix #1031 about wrong pool source information in job report.
609 kes Remove a redundant jcr argument to find_files, match_files, and
611 kes Implement '.status dir header|scheduled|running|terminated' that
612 prints the requested status section. With the exception of the
613 header, the other reports have fields separated by tabs (\t).
615 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
616 a resource embedded run command to find a since time if no explicit
617 since time was supplied on the command line.
618 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
619 that updates the state file at job termination time in addition to
620 when the daemon terminates.
622 kes First version where a plugin did a backup.
623 bpipe-fd.so created a backup file, wrote a test
624 string to it, and Bacua could restore this fabricated file.
626 kes Implement DB Driver = string for the DBI driver.
627 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
628 kes First cut of code for loading Win32 plugin dlls. Implement
629 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
630 and implement a dlfcn.h file based on opengroup's definitions of
633 kes First cut plugin directives.
635 kes Apply patch from bug #1049 to prevent stripping the path on a
637 kes Attempt to fix bug #1047 where stripping a path corrupts the
638 heap. Waiting for feedback.
639 kes Correct the Mount message not to suggest labeling a new tape
640 when doing a restore. Submitted by email by John Stoffel.
641 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
642 FD by using casting. Reported in bug #1042.
644 kes A bit of crypto cleanup. More later.
646 Release Version 2.2.8
648 kes Apply patch from Martin to correct bug #1040, bscan sets existing
650 kes Fixed important spelling error in doc -- bug #1045.
652 ebl Fix bextract to be able to extract non-portable Win32 data to
654 kes Move initialization of read/write res lock earlier in the code.
655 This fixes the crash with a null conf file. This fixes bug
657 kes Redefine CURES in lib/parse_conf to be URES and move it all
658 into lib/parse_conf.c -- this responds to bug #1042, but does
659 not fix it. The fix is not to compile with FORTIFY_SOURCE.
660 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
661 the trunk SVN. I don't think this was reported as a bug.
663 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
665 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
667 kes Add DataDespooling and DataCommitting status (committing is
668 the last despooling).
669 kes Finish implementation of new reservations code noted below.
671 kes Fix bsnprintf for float point numbers. I broke recently when
672 parameterizing some variables. This fixes bug #1036.
673 kes Undo recent reservations changes ... will apply them later
674 when they work better.
676 ebl Fixes #1034 which cause mysql to hang the connection after 8h
677 ebl Change default statistics target of filename.name and path.path
678 fields for PostgreSQL. This speeds lookup by indexes. Thanks
680 kes A few more tweaks to new reservation code. Make sure to clear
681 vol released flag when retaking volume. When reading label and
682 label is bad mark volume unused. When recycling, mark volume
683 unused so it can be renamed.
685 kes Fix reserve_volume() so it doesn't release a volume in use
686 (i.e. a volume entry not marked released). This should be
687 the last part needed to fix bug #1018.
689 kes Move Heartbeat documentation from Job to Director resource.
690 This fixes bug #1033.
692 kes Fix existing switch drive SD code to call autochanger to release
693 any old volume. This must be done to keep the autochanger from
694 releasing subsequently newly reserved volumes in doing a close().
695 This should fix bug #1018.
696 kes Fail if attempting to get console input in batch mode. This
697 should help fail RunScript console commands that are incomplete.
698 kes First cut implementing switch_drive() in SD (not actually called).
700 kes Implement first cut running console commands in a RunScript.
702 ebl Fixes bug #1028 where 'Selection Type' option was not usable
704 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
707 Release Version 2.2.7
709 kes Add new free_tls() entry point so that Win32 builds.
710 kes Fix compile warning in src/lib/util.c
711 kes Fix entry point for edit_job_codes() so that Win32 builds.
712 kes Fix seg fault Frank Sweetser reports in regression testing
713 on his systems. The problem was that the original author of
714 bsnprintf.c did not take into account the side effects of
715 using ++x in the argument to a #define.
716 kes Make SD protocol backward compatible with version 2.2.x.
718 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
719 because Bacula no longer restores sockets.
720 ebl Always use ignorecase fileset option on win32 FD.
722 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
723 that implements double quoting include names in conf files,
724 and also allows piping input by having the first character
725 be a vertical bar (|).
726 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
727 that implement %f in RunScripts to pass the FileSet name.
728 kes Skip leading | when lex input comes from a pipe as suggested
729 by Michael Stapelberg <michael@stapelberg.de>.
731 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
732 Nerijus Baliunas <nerijus@users.sourceforge.net>
734 kes Implement Plugin Directory and plugin events.
736 kes Implement a security enhancement: TLS authentication but no
737 encryption. Enabled by setting 'TLS Authentication = yes'.
738 Note when this is on, TLS encryption is turned OFF!
740 kes This patch corrects a problem where the maximum concurrent storage
741 jobs counter gets out of sync during restore jobs causing jobs to
742 'wait on max Storage jobs'. This patch fixes bug #1009.
744 kes This patch fixes bcopy so that it produces correct Volumes.
746 kes This patch eliminates spurious output to the console during a VerifyVolume
747 job that contains encrypted data. It fixes bug #1024.
749 kes This patch prevents the 'status dir' command from trying to use a scratch
750 volume and possibly moving it from one pool to another. This patch fixes
753 kes Add new include to postgresql.c suggested by Marc Cousins so
754 that it compiles correctly with pgre version 8.3.
756 kes Fix --archivedir addition to configure. Replace it with
757 --with-archivedir in configure.in This fixes the regression
759 kes This patch fixes bug #1012 where the job is canceled because
760 of Max Run Time exceeded when the job has not yet started.
762 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
763 one 'part' to write. Instead of each part being stored on disk,
764 written to DVD, then deleted from disk, all parts are written to disk,
765 and only the last is written and deleted from disk.
766 kes This patch fixes the status command to include the formating string for
767 JS_AttrInsterting. It fixes bug #1021.
768 kes This patch should fix the Mac OS X build problem on the latest
769 Darwin, where sys/types.h was not included correctly (apparently
770 due to a change in the Mac headers). The solution was to explicitly
771 ensure that it is defined for the ./configure.
772 This patch also has a rebuild of configure that includes the Debian
773 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
774 kes This patch should ensure that queued messages to the console are
775 displayed as soon as possible. It should fix bug 1007, but has been
776 reported not to work.
778 kes This patch fixes the infinite loop when trying to increase the
779 maximum number of volumes in a Pool during the add command.
780 This patch fixes bug #1008.
782 Release Version 2.2.6
784 db Remove extra data on estimate command in joblist for bat.
786 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
787 really change anything, but is the beginning of doing it *right*.
788 To do it completely right the LastWritten date must be passed to
789 the SD, but it is not yet done.
790 kes Minor tweaks to some bat restore SQL.
791 kes This patch fixes bug #1003 where putting the message output from
792 a Verify job into the catalog results in a recursive loop. The problem
793 seems to show up only with postgresql (to be verified).
794 kes Correct %x to %p in postgresql debug statement.
796 kes Fix bug #942 where lots of emails where generated when the heartbeat
797 interval was low and Bacula wanted a different tape from the one in
800 ebl Add new SD despooling attributes and Dir inserting attributes
801 job status codes in the catalog (Status table).
803 ebl Use qmake-qt4 instead of qmake when available (debian system).
805 kes Add a security warning to src/cats/make_catalog_backup.in indicating
806 that passing the password via the command line (arg 3) is insecure.
807 This responds to bug #990 (it doesn't fix it).
809 kes Set default debug_level to zero. This corrects bugs #991 and #993.
810 kes Fix a crash in bat when it cannot connect to the Director for example
811 if the Director is not running.
812 kes Remove redundant INDEX (JobId) from File table in the trunk.
814 kes Make explicit exception to GPL in LICENSE to permit linking
815 the Win32 FD with Microsoft VSS code.
816 kes Apply the Solaris package patch from
817 Masopust, Christian <christian.masopust@siemens.com>
818 kes Apply the patch to optionally add a timestamp in the debug output
819 submitted by Mariusz Czulada <manieq@wp.eu>.
821 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
822 backend (sql_strerror). Fixes bug #989
824 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
825 It applied with no problems.
826 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
828 kes Redirect stderror to stdin on mt status command in mtx-changer.in
829 since the status is returned on stderr on Solaris.
830 kes Activate Close button on tray-monitor window. This fixes
832 kes Check for NULL item in parse_conf.c before calling it. In the
833 case of Device, there is no item and this caused a seg fault when
834 Device appears in the conf file.
835 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
836 avoids pulling in config.h multiple times in some new code.
838 kes Fix spurious warning message printed when creating a volume with
839 a LabelFormat. This fixes bug #976.
841 Release Version 2.2.5
843 kes Add JobId in place of Job name in all the Jmsg() output.
844 kes Correct the APP_DESC for the Win32 storage service (remove an e).
846 kes Make maxvol-test and new more strict maxvol2-test work.
847 kes Print JobId in all Jmsg() job output.
849 kes Add new SD despooling attributes and Dir inserting attributes
850 job status codes. This fixes bug 961.
851 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
853 kes Fix doc issue. This fixes bug #963.
854 kes Fix listing performance problems in bat. Pointed out by
856 kes Remove old debug code.
857 kes Fix bat code that tests for Win32. This should fix bug #968
858 kes Query 5 list wrong Vol after migration. This fixes bug #960
860 ebl Fix #969 where user can't change Replace option in restore menu.
862 kes Save jcr in thread specific data (tsd) for each thread.
863 kes Make Dmsg() print JobId as -%u.
864 kes Make Jmsg, Emsg, and others automatically pickup the jobid
865 for the thread if it exists.
866 kes Remove old reservation debug jid code.
867 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
868 ebl Add an option that permit to specify spool size in job
869 definition. (Applying patches/testing/spoolsize_per_job.patch).
870 You must upgrade SD and DIR at the same time.
871 dvl Add new configuration item --archivedir
872 dvl Adjust regression tests to use tmp not /tmp. This will allow
873 multiple concurrent runs of the regression tests.
875 kes Fix race condition that drops final block written to volume.
876 This happens in rare cases with multiple simultaneous jobs
877 when the Volume fills. This fixes bug #964. May be related
878 to bug #935 and possibly #903.
879 kes Eliminate more strerror() and replace with bstrerror().
880 kes Remove BSD getopt and replace with unrestricted IBM version.
881 kes Fix Win32 build for changed calling sequences.
882 kes More tweaks to the mount volume routines to get everything
883 right. Changed variable name from find to have_vol, which is
884 much easier to understand.
885 kes Enhance btimer debug code.
887 kes Fix FD->SD authorization failure, which was due to spurious
888 wakeups from a pthread_cond_timedwait(). Simply check the
889 predicate before continuing. This fixes bug #953.
890 kes Add const char where needed (more to do). Remove temp debug code.
892 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
893 kes Don't overwrite error message in check_tables_version.
895 kes Unlock batch insert tables with same calls used elsewhere.
896 kes Allow starting 59 jobs a second.
897 kes Make SD session key more random.
898 kes Add retry for SQLite opening db if it fails. Probably helps
900 kes Suppress extra error messages during batch insert failure.
902 kes Add jcr to timer packets so if killed message can be sent to job.
903 kes Add JobId to all Dmsg() output.
904 kes Put some FD auth code on dbglvl rather than fixed.
905 kes Return insert attributes error message in db msg buffer to avoid
906 false error messages. Helps fix bug #966.
907 kes Separate batch init error messages. Probably helps fix bug #966.
908 kes Make SD code that contructs attribute insert check string lengths
910 kes If Dir gets an error during inserting attributes, cancel SD.
911 This reduces unnecessary error messages.
913 kes Correct search boolean for getting Volume info
914 ebl Cleanup batch insert code. Probably fixes bug #965.
915 kes Back out one small change to the reservation system (reserving a volume).
916 kes Rework how a Volume is mounted. It is now much more intelligent and
917 will always attempt to use any mounted volume if possible and reduces
918 calls to the Director asking about volumes.
920 kes Turn off some code when batch insert not enabled.
921 kes Edit FD name in connect error messages.
922 kes Rework the reservation system to take into account that the Director
923 might give us a Volume that is different from the current one being
924 used, and to ensure that we don't exceed Maximum Volume Jobs.
925 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
926 fatal error with multiple jobs running'
927 kes Add more debug code in reservation system.
928 kes Implement maxvol-test to check bug #947.
930 kes Add code to handle tray monitor separated from Win32 FD.
931 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
933 kes Add missed return in fixing verify bug -- trunk only.
934 ebl Fix a command parser issue causing a director segfault.
935 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
937 kes Increase the max block size to 4MB fixes bug #957.
938 kes ERABT if user sets min block size > max block size. Fixes bug #956.
939 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
940 is not properly mounted (recognized) during a poll.
941 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
942 Job that has differences reports Verify OK.
943 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
945 ebl Add an option to operate on all pools with update vol parameters.
946 This complete the project 20. Patch from Nigel Stepp.
947 ebl Add history support to bconsole when using readline.
948 Using Ctrl-D to exit doesn't update .bconsole_history
949 kes Modify new volume algorithm to use max MediaId for generating next
950 volume number rather than the count of Volumes. This should essentially
951 eliminate the failure rate if some volumes were deleted. Bug #921.
952 kes Begin implemention of Optimize Job Scheduling.
953 kes Implement restore callback that Dirk and I agreed on for bat
954 restore. This fixes bug #928. Restore of backup of zero files fails.
955 kes Fix SQL Catalog logging which broke with new db_escape_string
958 Release Version 2.2.4
960 kes Fix bacula_cats.def for new db_escape_string().
961 kes Increase size of name string when FD making connection to SD.
962 May fix bug #953. FD->SD connection failure.
964 kes Add code to help Dan debug 2drive-incremental-2disk test.
965 kes Add code to try to fix bug #908.
966 kes Add waits to multiple exit detection code to try to force pid
967 file to always be deleted.
968 kes Restore good dev.tar.gz to rescue set appropriate binary property.
970 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
971 trying to switch drives by checking for blocking before unblocking.
973 kes Cancel storage daemon in all cases where FD reports error. This
974 should fix virtually all cases of bug #920.
975 kes Fix db_escape_string() for MySQL which did not compile.
977 kes Fix error message that was clobbered when Dir tells SD it does not
978 have write permission on Volume. This should fix a minor point
979 in bug #942, but not the main problem.
980 kes Add code to cancel job in SD if FD connection fails. This should
982 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
983 dvl Pass jcr and db into db_escape_string() to enable better escaping
985 kes Fix migration code to get correct Volume name with multiple volumes
986 by skipping |. Fixes bug #936.
987 kes Implement patch supplied by Landon to fix bug #944 where using
988 TLS with bconsole uses 99+% of the CPU.
989 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
991 kes Move patches into patches directory.
993 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
996 ebl Using 'm' in bconsole will show messages like before,
997 and not memory usage.
998 kes Fix bug #935, and probably also bug #903 where files were not
999 restored. MediaId was not properly set in JobMedia record after
1002 kes Suppress chown and chmod error messages if the FD is not running
1005 kes Apply Martin Simmons' patch that should turn off the new API usage
1006 when batch insert is turned off allowing building on older
1008 kes Add ./configure search in qwt-qt4 for qwt package
1010 kes Bacula is now free of 3rd party GPL copyrighted code!
1011 kes Remove idcache.c
1012 kes Add guid_to_name.c/h which replace idcache.
1013 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1015 ebl Detect if new PosgreSQL batch insert API is present.
1016 kes Correct incorrect mempool call causing Director crash. Occurs on
1017 systems without va_copy().
1018 sb Update spec files for 2.2.1 release
1020 kes Fix memory pool call in ua_output.c. bug #934.
1021 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1022 Add test program to fnmatch.c
1024 kes Integrate patch to README.vc8 from
1025 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1026 edit it to get it into Unix patch format.
1027 kes Implement mkpath.c to replace old FSF makepath.c
1029 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1031 Release Version 2.2.1
1033 kes Update POTFILES.in
1034 kes Cleanup a few underquoted AC_DEFUNs in configure
1035 kes Apply patch from Martin Simmons that adds a test for va_copy to
1038 kes Fix bug #921 by increasing the number of tries to create a new volume
1040 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1041 can be called multiple times. Implement a version for machines
1042 without va_copy() that gets a big buffer.
1044 kes Integrate more portable zone offset code into bsmtp.c
1045 Submitted by Attila Fülöp.
1047 kes Fix bad SD->FD return status reported by
1048 (James Harper) <james.harper@bendigoit.com.au>
1049 ebl Fix a bug in read_close_session which return random status
1050 thanks to James Harper
1052 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1053 and directory names during restore of single file/directories.
1054 kes Add sanity checks to .sql command when string is empty. Hopefully
1055 that will resolve Dirks Director crash.
1057 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1058 in the bsmtp chat subroutine when debug is >= 10.
1060 kes Fix Director crash when running bat SQL queries.
1061 kes Add David's notes on Item 8: Copy pools.
1063 kes Rework projects file to be current and ready for a vote.
1064 kes Enhance lex scanner error message.
1066 kes Tweak LICENSE file to mention BSD code.
1067 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1068 if specified on the ./configure.
1069 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1070 This class is intended to allow us to open a second bsock to the
1071 Director while in the restore subdialog.
1073 kes Fix configure to create bat Makefile before creating dependencies.
1074 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1075 kes Add a tooltip to the tray monitor.
1076 dvl Set the Director's PID file before dropping privs. This fixes
1079 kes Update AUTHORs file
1080 kes Increase the default max concurrent jobs to 20 in FD and SD to
1081 correspond with the default .conf files.
1082 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1083 some different, of the same file created by RN when porting the
1085 kes Rearrange some of the Win32 directories and the placement of the files
1087 kes Set DEVELOPER flag in version.h
1089 ========================================================================
1090 Release Version 2.2.0
1092 kes Apply a second doc patch from Marc.
1093 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1094 improves the tips section that discusses how to setup multiple
1097 kes Update bat README file.
1098 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1099 corrects a typo in the Recycle status check in db_find_next_volume().
1100 This will probably fix a number of annoying problems with multiple
1102 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1103 bnet calls -- no functionality change.
1105 kes Modify the Verify output to specify if files are missing on
1106 the Volume(s) or disk. Fixes confusion in bug #916.
1107 kes When more than one Volume is read in a migration job, the last
1108 Volume bytes reported are from the last read volume rather than
1109 the last written volume. Fixed. This fixes bug #910.
1110 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1111 It previously printed New Recyle flag is: no. This fixes bug
1114 kes Correct seg fault when switching tape drives during restore.
1115 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1116 be used until after 2.2.0 release.
1118 kes Remove fnmatch() in SD that permitted wild card specifications.
1119 This fixes bug #914.
1121 kes Fix %g in filename returned by SQL for browse tree reported by
1123 kes Fix configure so that it puts config.out in the cwd rather than
1125 kes Attempt to fix the locking problem reported by Eric in bug #906.
1126 kes Make berrno class to leave errno unchanged after constructor call.
1127 kes Make bnet_server use the heap rather than the stack to allocate
1128 its socket fd pointers to avoid a crash at termination. Problem
1129 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1131 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1132 and putting it in depkgs-qt along with Qt4.3.
1134 kes Rework code in acquire.c that switches drives for reading when
1135 the Media Type does not match. This should fix bug #906
1137 ebl Fix a director segfault during job setup #907
1138 kes Correct seg fault in postgresql when first operation returns no
1139 rows. Fixes Dirks File browser problem seg fault with bat.
1141 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1142 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1145 kes Implement PopUp YES/NO dialog for bat.
1147 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1149 kes Correct RunScript to terminate job in FD on failure.
1150 kes Change abort_on_error and AbortJobOnError to fail_on_error
1151 and FailJobOnError in RunScripts.
1152 kes Minor tweaks of code formating in RunScripts, principally to
1153 avoid depassing 80 columns.
1155 kes Eliminate one #ifdef Win32 in bsmtp
1156 kes Implement grow tool to grow a file for testing very large databases.
1157 kes Add big-vol-test to test Bacula seeking with > 5GB.
1160 kes Modify find_next_volume() to return all values in Media record.
1161 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1165 kes Update Release notes
1167 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1168 Warning, in previous beta version, all media get from scratch keep their
1171 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1172 This should fix bug #842. Made a note to look at removing the temp
1173 files at the end of the install.
1174 kes Add ability to mount and unmount a file device providing it is
1175 marked as being removable and has the appropriate mount and unmount
1176 commands defined in the Device resource. This fixes bug #830.
1177 kes When applying a storage override, release all previous storage
1178 definitions rather than just prepending the new storage.
1179 This should prevent a good deal of confusion.
1181 kes Implement ./configure search for qwt libraries.
1183 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1184 Win32 FD. This should fix bug #893.
1185 kes Remove an unnecessary beep in Win32 init code.
1186 kes Update copyright dates in Win32 executable about boxes.
1187 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1188 code with a BSD getopt.c and getopt.h.
1189 kes Remove sched.h from the Win32 compat directory -- not used.
1190 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1191 need to shut it down, do it through the services panel or the command
1193 kes Remove some inappropriate Bacula FSFE copyrights.
1194 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1195 kes Fix regress config non-portable test as pointed out by
1196 Florian Heigl <florian.heigl@gmail.com>
1197 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1198 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1200 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1201 Reported by Frank Sweetser.
1205 kes Fix client-only build.
1206 kes Integrate client-only fixes for bsys (initgroups) and conio from
1207 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1208 kes Make arguments to get_scratch_volume() in same order as other
1210 kes Rework the prune_volumes() subroutine so that after purging and
1211 no volume found in desired pool, it will check for a scratch
1212 volume. This prevents recycling the whole scratch pool.
1213 kes Add code to status storage to print boffset_t (largefile support).
1215 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1216 kes You now need a --with-qwt=<dir> to be able to build bat.
1217 kes Update src/win32/cats/bacula_cats.def to include the new
1218 db_get_query_dbids() call on Win32.
1220 kes Correct a problem when selecting a scratch volume and moving
1221 it to another pool that lost some columns.
1222 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1223 kes Enhance Autochanger error messages to include Volume and device name.
1224 kes Rework prune_volumes() code to take account of InChanger flag,
1225 and to handle recycling volumes going to the Scratch pool and
1226 current pool because the RecyclePool directive.
1227 kes Implement a better and more efficient db_get_query_dbids() to
1228 handle creating and passing back a list of DBIds.
1232 kes Start work on new more efficient DBId subroutine. First use
1233 will be for recycling volume to Scratch inchanger.
1234 kes Increase number of JobIds in pruning from 1000 to 10000.
1235 This to be replaced by above routine.
1236 kes Begin implementation of building Qt4 on Win32.
1237 kes Correct typo in fix I added for bad TLS shutdown.
1238 kes Pull 2.0.3 patches into patches directory.
1239 kes Update Release notes. Include qt-console in line count.
1240 kes Update Projects file.
1242 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1243 bug in migration code where a job that spanned two volumes
1246 kes Implement new BST_DESPOOLING blocked state. Change from locking
1247 during despooling in SD to blocking. This means that other threads
1248 can work with the device structure, in particular the reservations
1249 system while despooling.
1251 kes Fix return in reservation message queue that missed clearing
1252 the jcr lock (implemented 26Jun07 below).
1253 kes Rename a number of dev methods to make locking function names
1255 kes Document locking in lock.c. Move lock structures to new file
1258 kes Move reservations message lock to lock jcr only this
1260 kes Move main SD locking code into lock.c (new file).
1261 kes Update Win32 build to include lock.c
1265 kes Dirk committed the qwt library code for drawing graphs in bat.
1266 kes Tweak install of qwt so that it is integrated with ./configure.
1268 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1269 out by Eric (my typo).
1270 ebl Fix configure.in to get batch mode enable
1271 kes Return correct string from authenticate.cpp in bat when connecting
1273 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1274 spurious line drops when using TLS.
1275 kes Do not file reparse points when restoring a file that already
1278 kes Implement Windows reparse points -- similar to directories, but
1279 we do not descend into it. This is a first cut. They seem to
1280 be backed up, but restore is not yet tested.
1281 kes Remove restore_blocking in tls code when shutting a socket to leave
1282 it in blocking mode. Hopefully this will fix the encryption bug
1283 reported by Frank Sweetser.
1284 kes When opening a file for backup, tell the OS that we are going to
1285 read it sequentially -- optimization.
1286 kes Change variable names in authenticate_director() to not conflict
1287 with member names in bat. Caused great confusion with compiler,
1290 kes Queue openssl error messages in case of comm problem.
1291 kes Do shutdown() call if socket terminated.
1292 kes Remove some duplicated code in tls.c
1293 kes Move more of the bsock member variables into private and access
1295 kes Add Frank Sweetser's tls-test to the regression suite.
1297 kes Add Swedish sv.po file
1299 kes Don't print clock skew message in FD if less than 3 seconds diff.
1300 kes Add a bit of VSS info to status client.
1301 kes Implement a first cut of Vista VSS, using Win2003 code.
1303 Release: 2.1.20 beta
1305 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1306 loaded tape but uses first drive).
1307 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1308 This was indeed a Win32 issue.
1310 kes Simplify search of autochanger for in-use Volume.
1311 kes Fix exit condition of check for in-use volume. kes Remove
1312 inappropriate my_postgresql_free_result() in db_close()
1314 kes Fix bad return in FD when encryption signature not found.
1315 Probably caused a crash.
1316 kes Inhibit missing encryption signature error messages for
1317 file types where no signature computed.
1318 kes Correct inverted check on autochanger in reservation system.
1319 kes Tweak debug code in autochanger reservation.
1321 kes Add some additional locking in the cats directory in subroutines
1322 that modify packet variables called from batch insert.
1323 kes Rework how dcrs are allocated. new_dcr() can now be called
1324 with an existing pointer, and it will simply clean it up.
1325 This allows the reservation system to test various different
1326 devices, and will permit easy device changes.
1327 kes A bunch of changes all over to handle new new_dcr() calling
1329 kes Work more on the Volume management in the SD. Remember Volumes
1330 for tape drives and for autochangers (even virtual disk changers).
1331 kes When looking at the Volume list to reserve a drive, handle
1332 autochanger names correctly by interating through the changer
1333 devices. Also call the Director to see if a Volume is suitable
1334 for the current job.
1335 kes Fix some bugs in bscan. Make sure all media records are written.
1336 Make sure that valid JobMedia records are written for disk files.
1337 Previously they were completely wrong.
1338 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1339 that the URLs don't change and so that the developers will all
1340 work off the same copy. Rebuild from scrach.
1341 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1343 Release: 2.1.18 beta
1345 kes Fix seg fault in FD from incorrect digest size.
1346 kes Fix argument to non-OpenSSL crypto.c subroutine.
1348 Release: 2.1.16 beta
1350 kes Remove a few malloc()s from the encryption code.
1351 kes Use the class calls to bsock in filed/backup.c and restore.c in
1352 place of the old bnet_xxx code.
1353 kes Implement code that does an on the fly calculation of the
1354 signing digest during restore of encrypted files. It makes
1355 a best guess at the algorithm, and if it is not correct, will
1356 then revert to the old code which reads the file after it is
1358 kes Implement at least one missing crypto stream in stream_to_ascii()
1359 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1360 #877 where a reload with bad syntax causes Dir to exit.
1362 Cut: 2.1.14 beta (not released)
1364 kes Do not free a volume on a tape drive until another volume is
1365 mounted and read, or the autochanger unloads the volume.
1366 This should help the SD re-use volumes that are already mounted,
1367 and should fix bug #886.
1368 kes Apply patch from user brettedgar that allows gnome2-console include
1369 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1370 kes Apply patch from Lucien Weller that fixes day of week calculation
1371 because of DST flag problem. Fixes bug #887.
1373 kes Move find_next_appendable_volume() to after acquiring a valid device
1374 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1376 kes Unable to reproduce bug 872. However added additional testing for
1378 kes Bug #874 resolved by documenting SQLite limitations.
1379 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1380 kes Bug #881 resolved by removing typo in mtx-changer script.
1381 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1382 approval. Added a link to the wiki on the web page, and implemented
1383 a backup from http://paramount.ind.wpi.edu
1385 kes Fix update allfrompool to pass pool name.
1387 kes Convert to pure GPL v2 license.
1388 kes Fix sscanf problems reported by Peter Buschman that caused
1389 a bus error on Solaris.
1390 kes Rework (simplify) the select prompt in bat.
1391 kes Move get_jobid_from_tid() into lib and create a
1393 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1394 should definitely fix the problem of lost error messages in the
1396 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1397 kes Eliminate tcpd.h from the project. Enclose the #include from the
1398 library with extern C ...
1399 kes Add print of signal name when a signal is trapped.
1401 Release: 2.1.12 beta
1403 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1405 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1406 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1407 makes SQLit3 run 30 times faster, though a bit less safe.
1408 kes Implement --with-batch-insert in configure and detection of thread
1409 safe libraries. It is on by default, but turned off if no thread
1410 safe library (e.g. SQLite 2) is available.
1412 kes Fix Bacula PostgreSQL buffer overruns.
1413 kes Do better checking for NULL results returned from PostgreSQL;
1414 implement retry for failed queries; clear results buffer after
1415 failed query. Hopefully this will correct the PostgreSQL failures.
1417 kes Implement algorithm to handle only one appendable volume with
1418 Prefer Mounted Volumes = no.
1419 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1420 returned from a query.
1421 kes Make volume lock recursive.
1422 kes Implement an additional volume reservation algorithm that
1423 starts by considering all reserved volumes then uses the
1424 old brute force algorithm of searching the resources to
1425 find a suitable device.
1426 kes Add new reservations debug code and refine the old code.
1427 kes Update the win32/dll/bacula.defs file.
1429 kes Tweak reservations algorithm to permit a few more cases, i.e.
1430 volume reserved, but on different drive, ...
1431 kes Enhance SD status to include Pool and Media Type for drive in a
1432 more readable format (a bit longer).
1433 kes Fix PostgreSQL double free.
1435 kes Minor refactoring of restore decryption code.
1436 kes Add code to smartall.c to detect double free of a buffer.
1438 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1439 so that bsmtp will create a correct email address (mailbox only).
1440 kes Modify 'memory' command so that the buffers are listed as 'In use'
1441 to avoid confusion with Orphaned buffers.
1442 kes I reworked the OpenSSL include/lib flags to be handled in
1443 the standard Bacula way, which should fix bug #863 concerning
1444 non-standard OpenSSL libraries.
1446 kes Implement Help Browser window for bat.
1447 kes Fix reload bug that reset StorageId to zero.
1449 kes Fix TLS #ifdefing when TLS turned off.
1450 kes Ensure that when labelling a tape with Slot=0 that InChanger
1452 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1454 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1455 add DISTINCT (required by PostgreSQL).
1456 kes Implement BSOCK authenticate_director() method. Eventually will
1457 authenicate all daemons.
1458 kes Move several more functions into the BSOCK class.
1460 kes Add code to tell the OS that we no longer need a cached
1461 file that we were reading. In findlib/bfile.c. Also,
1462 only cache files that we are reading. Thanks to
1463 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1464 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1465 kes Implement script to automatically generate cats and dll .def
1466 files for Win32 dll.
1467 kes Update README.mingw32 to include new .def file generation.
1468 kes Correct typo in UTF-8 error message as reported by:
1469 jhernandez <julianhernandez@gmail.com>
1470 kes Add additional sm_check() code on debug level 1.
1471 kes Set default debug level to 1.
1472 kes Trap SIGABRT in attempt to get traceback.
1474 kes Reduce bat connect timeout from 30 to 15 seconds.
1475 kes More restructuring and implementing BSOCK class in place of
1477 kes Remove a few unnecessary malloc() tests in crypto code.
1478 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1479 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1480 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1482 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1484 kes Fix Verify InitCatalog. The attributes were not pointing to the
1485 correct saved location.
1486 kes Implement message callback so that GUI is sure to get all
1487 daemon messages. Currently displayed in a dialog in bat.
1488 kes Ignore SIGUSR2 (Bacula timer) in bat.
1489 kes Apply regress patch from bug #859 to allow regress to work
1490 with Solaris compiler.
1492 kes Begin adding TLS support to bat.
1493 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1494 clean up lex.c and make it more readable.
1496 kes Move more bnet functions into the BSOCK class.
1497 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1498 kes Complete change of berrno strerror() method to bstrerror()
1500 Release: 2.1.10 beta
1502 kes Cleanup incorrect email addresses in bsmtp.
1503 kes Make bat display initial messages rather than discard them.
1505 kes First cut of adding .mod to the run command.
1506 kes Implement auto display of messages in bat.
1507 kes Enhanced preferences to allow all Bacula output to be
1510 kes Try to make bsmtp date routines more generic.
1511 kes Fixed bug #856 autochanger documentation.
1512 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1513 kes Add new cats entry point so Win32 builds.
1515 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1517 kes Do better checking for the MySQL 64 bit libraries looking for both
1518 .a and .so libraries.
1519 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1520 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1521 kes Require the thread safe version of MySQL during configure. Thanks
1522 to Andre Noll for pointing this out.
1523 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1524 continuing in migration code.
1525 kes Apply implementation of tray-monitor font derived from gnome-console
1526 submitted by Andreas Piesk <a.piesk@gmx.net>
1528 kes Eliminate important memory loss in SQLite
1529 kes Fixed the batch insert MySQL thread specific data that was not
1530 being freed. See cats/mysql.c:db_thread_cleanup().
1531 kes Fix restore before command.
1532 kes Convert old hdr.name to name() in a few places.
1533 kes Implement update jobid command.
1534 kes Return all time_t dates in db_get_job_record()
1535 kes Stop watchdog in SD earlier.
1536 kes Put Pool just after Storage in please mount message.
1537 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1540 kes Update the po files.
1541 kes Fix Verify InitCatalog by making it cache attributes.
1543 kes Change name bacula-bat to bat for man 1 page to correspond to
1545 kes Check for client and store NULL pointers in status command. This
1547 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1548 kes Fix sign extended editing of %p.
1549 kes Clean out a little old #ifdefing in cats/mysql.c
1551 kes If time diff between DIR and FD is more than 600 seconds convert
1552 INFO message to WARNING.
1553 kes Implement heap size display in status for all daemons.
1554 kes Attempt to fix MySQL db open memory loss (not successfull).
1555 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1556 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1557 Query. This looks like a MySQL but but by doing extra releases,
1558 the memory goes away. This should fix bug #847.
1560 kes When backup fails, cancel SD before waiting for sd termination.
1561 kes If SD is waiting for FD to connect during cancel, wake up the
1563 kes Fix fsf code so that errno is correctly reported.
1564 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1566 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1567 so that Bacula doesn't later stumble into a seg fault.
1568 kes Use the term Restore Client in the restore Job report.
1569 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1570 the original job's FileSetId.
1571 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1572 spooling in migration jobs. Not yet tested.
1573 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1574 reading conf file from a pipe. However, do it with open_bpipe()
1575 rather than popen. Not yet tested.
1577 kes Fix an ugly bug where the VolCatBytes were getting updated
1579 kes Implement bconsole memory command that prints current memory
1580 usage, plus smartalloc dump.
1581 kes Clarify some error messages in backup, admin, and migrate.
1582 kes Shrink label dialog to smaller size.
1583 kes Invert Cancel OK buttons on restore to be OK Cancel.
1584 kes More strerror() to bstrerror() conversions.
1586 kes Start implementing bstrerror() in place of strerror().
1587 kes Stripping path -- seems to work.
1589 kes Prevent door and port files from being restored (mostly
1591 kes Free an unreleased buffer in compat code.
1592 kes Change console Job name from *Console* to -Console- to eliminate
1593 Win32 filename problems. Put Win32 path separator when creating
1594 Console file. This fixes bug #846.
1595 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1597 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1599 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1600 to force Win32 error message.
1602 kes First cut strip path. The data should be passed to the FD,
1603 but nothing is done with it yet.
1604 kes Enhance the digest and signature routines in the crypto
1605 library to accept a JCR and to use it to print error messages
1606 so that they will go in the Job report rather than the daemon's
1608 kes Simplify some of the verify signature code.
1609 kes Simplify a few of the alternative returns in the signature
1612 ebl Use only POSIX regex instead of GNU regex in breg.c for
1613 File relocation. It fix broken freebsd compilation.
1614 kes Convert all other Dir files to use new ua class message
1616 kes Tentative fix for missing digest signature in bug 807.
1617 kes Correct handle problem in new win32_ftruncate routine.
1618 kes Convert ua_purge.c and ua_update.c to use new ua class
1619 message routines for bat.
1621 kes Correct incorrect installation of LICENSE in Win32 installer.
1622 kes Display LICENSE at the beginning of the Win32 install.
1623 kes Attempt to correct the need for the png files to be installed
1625 kes Reapply my bat.conf install script in qt-console. I think I
1626 editted bat.pro instead of bat.pro.in and it was lost.
1627 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1628 the /var/lock/subsys for subsysdir. Also corrects typos in the
1631 kes First cut update job.
1632 kes Correct configure to include qmake of src/qt-console directory.
1634 kes Make restore job yes/mod/no print in one command so GUI works.
1635 kes First cut implementing backup and restore client.
1636 kes Correct editing in Verify output that caused a seg fault.
1638 kes Insure that bat.conf is not overwritten during installation.
1639 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1640 while I was implementing migration in March 2006 !
1642 ebl Cleanup file relocation, using char *RegexWhere instead of
1643 char *where + bool where_use_regexp
1644 kes Update some manpages and add bat manpage.
1645 kes Make a first cut at converting bacula.spec.in for bwx-console
1647 kes Apply patch from John Goerzen to add hostname as fourth argument
1648 to make_catalog_backup script.
1649 kes Fix typos I introduced into bsmtp.c
1650 kes Make pm_strxxx() routines handle input of NULL pointer. This
1651 is to protect from NULL pointers returned from SQL databases.
1652 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1653 kes Add more debug to FIFO code -- fix fifo regression test.
1655 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1656 kes Add thread timer to bnet_connect() to break from OS if wait time
1659 kes Update Win32 build to include new files, new symbols, and
1661 kes Implement socket level heartbeat (tcp_keepidle)
1662 ebl Commit File relocation patch
1663 kes Make bat have 'make install' target.
1664 kes Warn during install if old gnome-console binary found.
1665 kes Warn during install if old wx-console binary found.
1666 kes Add -8 option to bsmtp command line to add content type utf-8.
1667 Fixes bug #809. (Character coding problem in bsmtp).
1668 kes If < is found in target (from, to, cc) then do not enclose the
1669 target in < > in bsmtp. Fixes bug #772 (malformed address).
1670 kes When printing certain items in dbcheck, stop after 300000.
1671 Fixes bug #822. (dbcheck loops).
1672 kes Incorrect status in Dir after waiting for mount with poll set.
1675 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1677 kes Print waiting to reserve a device every 5 mins.
1679 kes Don't call close_part in label.c if tape and relabel.
1680 kes Don't free volume if busy in close() -- should help with
1682 ebl Fix #824 RunScript bug (After script could be execute twice)
1683 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1684 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1685 Add a regression script to test RunScript
1687 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1690 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1691 deprecated. No additional bugs will be fixed, and they will be dropped
1692 in a future release (probably 2.4.0).
1693 kes Change name of wx-console to bwx-console to make it more Bacula
1695 kes Change the name of gnome-console to bgnome-console to make it
1698 kes Some time in March, a Feature Request with patch from Jorj Bauer
1699 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1701 The ability for the director to validate a Client (FD) CN against
1702 an arbitrary set of patterns rather than the hostname, with
1703 A new 'TLS Allowed CN' set of directives which are implemented
1704 in the Client resource. Then pattern matching is used in place
1705 of hostname matching against the Certificate's CN. As an example, we
1706 have certificates which (a) use a local CA, and (b) have a CN of the
1708 kes Add new/changed entry points to Win32 build
1709 kes Create unaccepted-projects for projects that are not accepted.
1710 kes Simplify locking in the reservations system.
1711 kes Add more debug code in reservations.
1712 kes Make sure error condition on reserving a volume is handled correctly.
1713 kes Correct handling of volume_in_use.
1714 kes Correct handling of initializing a device.
1715 kes Move handling of broadcasting releasing a device into release_device().
1716 kes Correct attaching dcr to dev so that it is only done if device
1717 is properly initiated.
1719 kes Locking debug level tweaks in SD.
1720 kes Tweak new Volume code.
1722 kes Add exec external-command [wait-seconds] to bconsole. This
1723 executes the external-command. Note! normally external-command
1724 should be enclosed in double quotes.
1725 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1726 it should normally be off in a production system.
1728 kes Implement die command for SD so that we can force it to dump.
1729 kes Implement SD lock debug code.
1730 kes Implement new algorithm for keeping Volume list in SD. It
1731 is now owned by the device.
1733 kes Implement new code for freeing in use volumes that should
1734 resolve if not all, some of the problems of multiple drive
1735 tape conflicts described in bug 801.
1737 kes Fix gui/bacula-web/images files in svn.
1738 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1740 ebl Fix a bug in batch mode (in string escape)
1741 kes Correct migration prune SQL typo that crept in in a
1742 recent 2.1.x change.
1744 kes Move bnet_despool() into class in bsock.c
1745 kes Modify job report to include director name and Build OS.
1746 kes Move drop root privilege and check_catalog() before fork.
1747 kes Add update database scripts (version 9 to 10) to updatedb directory.
1749 ebl Check size and age of each file after its backup to see if
1750 it has changed during backup, if 'checkfilechanges' is set.
1751 The FD will do an extra check (stat(2)) after
1752 each file backup. mtime, ctime and size are compared with
1753 'before backup' information. If time or size mismatch, an
1754 error message will be generated. You must upgrade FD to use it.
1756 kes Make database name and user configurable
1757 --with-db-name=xxx --with-db-user=xxx
1758 kes Add back database type to message.c for debugging.
1760 kes Implement dir_sql() which issues an SQL query.
1761 kes Modify bat medialist to use dir_sql() and do some minor C++
1762 formatting as well as eliminating a number of pointers, simplifing
1765 kes Fix some of the mtx-changer grep commands for tape label readers.
1766 kes Convert a number of bsendmsg into the appropriate send/warning/error
1767 message class calls.
1768 kes Suppress the using database message in the .sql command.
1769 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1771 kes Add context menu for floating a window.
1772 kes Some minor cleanup and name changes in qt-console
1773 kes Add doing mt setblk 0 in Win32 mtx-changer.
1774 kes Apply Martin's bug fix to move definition of ENODATA for
1776 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1777 sqlite2 and sqlite3.
1779 kes More pruning cleanup.
1780 kes Turn on wait_for_drive by default in mtx-changer.
1781 kes Turn on Batch insert code by default as it now passes regression.
1782 kes Add ./configure --enable-bat to enable building of Bat.
1783 No install yet though.
1785 kes Implement a new .sql command for bat.
1786 kes Implement code to turn off pruning in obtaining the next volume.
1787 Pruning is turned off for the status dir command, but turned on
1788 for SD requests and for the list nextvolume command.
1790 kes Correct Qmsg() that was not updated correctly when committing a
1791 previous change (probably the recent TLS patch).
1793 kes Write new subroutine is_volume_purged() that explicitly checks
1794 if the Volume is purged, and if so marks it as such. This should
1795 resolve problems reported about needing to mount twice to recycle
1797 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1798 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1799 amount of duplicated code.
1800 kes Do volume pruning only for the Media Type desired (reduces pruning time
1801 if multiple Media Types are in the same pool).
1802 kes Implement more detailed info in the Job report for the Bacula version
1804 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1806 ebl Add bbatch tool to bench database and insert mode.
1807 Fix sql quote stuff in batch mode
1808 Fix sql stuff for mysql
1810 kes Correct problems with am/pm scheduling. Fixes bug #808.
1811 kes Implement new prunning code that prunes up to 1000 jobs at
1812 the same time. The same technique can be applied to a number
1813 of other prune/purge subroutines.
1814 kes Add an insanity check when starting a new tape job to ensure
1815 that the tape position has not been changed. If so fail the
1817 kes Fix Win32 build for dlls to add the folllowing:
1818 src/lib/bsock.c -- new file with new entry points
1819 src/lib/dlist.c -- new entry points
1820 src/cats/sql_create.c -- new entry point
1821 src/cats/sql_cmds.c -- new DATA item exported
1823 ebl batch mode cleanup bscan-test is ok now.
1824 kes Implement SD code to check length of disk volume before appending.
1826 kes Correct return status on db_batch... routines.
1827 kes Add call to db_write_batch_file_records() to migration code.
1828 ebl Fix AfterJob timing
1829 kes Move the checking of the database in initializion of the Director
1830 to after we drop privileges. This avoids the need for both root
1831 and bacula access to the DB.
1832 kes Correct a misplaced variable definition in src/filed/backup.c
1833 kes Correct how the new batch insert db_create_attributes_record()
1834 uses the arguments. Caused a seg fault in bscan.
1835 kes Implement lock() and unlock() methods in DEVICE class.
1836 Implement block() and set_block(xx) methods in DEVICE class.
1837 kes Modify bnet_connect() so that it uses time() to check for the
1838 wait time expiring (on some OSes, some system calls may not
1839 return immediately).
1840 kes Modify Verify to obtain the previous JobId when it is actually
1841 running rather than at schedule time (as it was in 1.38.x).
1842 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1844 kes When checking pid in pid file, continue running if the pid is
1845 the same as ours. This occurs on IRIX after a system crash.
1848 kes Extend new GUI API.
1849 kes Make the ua structure a class, and implement send_msg(),
1850 error_msg(), warning_msg(), and info_msg().
1852 kes Apply fix from for building wx-console on the Mac from
1854 kes Implement new select mechanism for GUI programs.
1855 kes Reorganize initialization of stackedWidgets in bat.
1857 kes Add updated nagios plugin supplied by Christian Masopust.
1859 kes More bat implementation.
1860 kes File migrate bug with Pool Occupancy using mediaid instead
1861 of jobids. Fixes bug #795.
1862 kes Fix orphaned buffers in filed backup and verify due to
1863 crypto buffers not freed during errors. Fixes bug #789.
1864 kes Extend new GUI api code to tree commands.
1865 kes Ensure that tree and dot commands check console ACLs.
1866 kes Permit marking directory with trailing slash.
1867 kes Allow 20 console connections (instead of only 10).
1869 kes Add smartctl call to bacula-sd.conf as an example of getting
1872 kes Modify jobq.c to let simultaneous restore jobs run. This may
1873 cause them to fail if they cannot get a drive.
1874 kes Add Client Connect Wait to Storage daemon to permit users to
1875 modify the time the SD waits for a FD connection.
1877 kes Correct virtual changer check which was backwards. This caused
1878 volumes to be unloaded into slots already occupied.
1880 kes Apply Command ACL filter to JobId list in restore command.
1881 kes Correct typeo in var.c patch.
1883 kes Don't let Bacula prune File or Job records for the current Job.
1884 kes Fix variable substitution pad + inc bug reported (with patch)
1887 kes Correct SQLite log table index as reported by Luca Berra.
1889 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1891 kes Begin implementing new comm signals for API.
1892 kes Fix a few places in lib/message.c where the open fd may
1894 kes Continue implementing lib/bsock.c (real class). Make jcr,
1895 who, host, and port private. There are new methods to access
1896 them for non-class use. This required touching a number of files.
1898 kes Add LANG=C to autoconf/randpass so it works with languages other
1899 than English. Fixes bug #788.
1901 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1903 You will not be able to generate Include/Exclude list any more.
1904 It will be fixed soon.
1905 If you want to use this, you can apply
1906 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1908 kes Restore of sockets created false error messages because Bacula
1909 no longer restores sockets, but the code was still trying to
1910 set the attributes on a non-existent file. Reported by a user.
1911 ebl finish RecyclePool feature
1912 Media will takes Pool.RecyclePool
1913 when moving from Scratch to a Pool or when user will do
1914 update volume=xxx frompool
1915 To use it, add RecyclePool = aPool to your Pool resource
1918 RecyclePool = Scratch
1922 kes Expand new BSOCK class adding signal() and new BNET signals.
1923 kes Begin enhancing the dot commands adding a new API function
1924 that returns more information and will make it easier
1925 to interface to the Director from a program.
1927 kes Make DEVICE fd private. Its new name is m_fd, and can be
1928 obtained with dev->fd() outside the class. This is the
1929 first of many DEVICE members to be made private.
1930 kes Implement Michael Renner's idea on having a virtual disk
1931 changer. I made some minor modifications (e.g. I did not
1932 implement the Virtual Changer directive, but simply set
1933 the Changer Command to an empty string.
1935 kes Implement a BSOCK send() method that writes the whole record
1936 in a single write() request rather than in two.
1937 ebl add update volume=xxx recyclepool=yyyy
1938 volume takes recyclepool from pool when using update volume=xxx from pool
1940 kes Fix encryption deblocking bug, which caused some restored files
1941 to be truncated. This fixes bug #763.
1942 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1943 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1945 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1946 ebl Use btime_t instead of uint64_t in media patch.
1948 kes Optimize the use of the database a bit in the Status dir command.
1949 Only open it when needed, ensure that if any previous database
1950 was opened, it is closed.
1952 kes Correct VolCatBytes bug from media patch.
1953 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1954 in the case of orphaned records.
1955 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1956 and File records in 300K chunks to be more efficient. This
1957 idea came from Juan Luis Frances (if I remember right).
1958 kes Apply Eric's scratch patch that moves a purged Volume to
1959 the RecyclePool. Question: how is RecyclePool set? what
1960 happens to the ScratchPool?
1961 kes Apply Eric's media patch that collects read/write media
1962 times as well as byte counts. This patch requires a
1963 simultaneous upgrade of the DIR and SD. Note, there
1964 should be some way to turn off timing. I'm not sure
1965 times are in Bacula units.
1966 kes Apply Eric's batch-insert patch.
1968 kes Update projects list.
1970 kes Implement Include/Exclude file lists in FD as dlists using
1971 the new dlistString class. This permits efficiently having
1972 large include/exclude lists and completes project Item 25.
1973 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1974 console is authorized to cancel the job. This fixes bug
1976 kes Modify SD so that the VolCatJobs medium record is updated
1977 at the beginning of a Job rather than the end. This
1978 fixes bug #775 where exceeding MaxVolJobs caused jobs
1980 kes Added a mutex around getting and setting Volume information
1981 so that multiple simultaneous jobs will single thread.
1983 Switch to using Subversion
1984 kes Remove src/pygtk-console/ from configure
1986 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1987 plus the entrypoints.
1988 kes Apply patch supplied that corrects debug print
1989 in canceling jobs for max run time. Supplied as
1990 part of bug #621, which was previously fixed.
1992 kes Test on job_canceled() and sd_msg_thread_done inside
1993 loop starting the message thread to avoid a race condition.
1995 kes Remove rl_catch_signal from console.c as it conflicted
1996 with the header definition. Fixes bug #765.
1997 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1999 kes Clarify some stored/acquire messages to indicate if the
2000 problem is with read or append.
2002 kes Fix memory leak with storage ids in cats/sql_get.c
2003 kes Terminate watchdog earlier to avoid reference to released
2004 memory -- reported by Jason Austin.
2005 kes Move closing the database from jobq.c to the director daemon
2006 termination routine. This fixes memory leaks for shadow jobs
2007 (i.e. migration jobs).
2008 kes Free up the unique jobid chain items in migrate.c. This fixes
2009 a memory leak problem.
2010 kes Convert some ugly looking for statements to use foreach_alist
2011 in findlib/find.c. This will facilitate converting the structures
2012 to use dlist (for large include/exclude lists).
2013 kes Fix a bug in the btree.c and btree.h routines, then rename them
2014 rblist and add them to be built in src/lib. Include some new
2015 methods written by Rudolf Cejka that make the code more readable
2016 (hides some of the ugly casting).
2017 kes Add set_next() and set_prev() methods which make the code much more
2018 readable. Also add a new dlistString class that facilitates storing
2019 strings in dlists. To be used in the large include/exclude lists.
2020 kes Make some trivial modifications to lib/tree.h that use rblist
2021 rather than dlist for storing the tree links. This was suggested
2022 by Rudolf Cejka. The result of this is that the restore tree now
2023 uses red-black binary trees rather than simple linked lists. This
2024 should give rather dramatic speed improvements for directories
2025 contining large numbers of directories/files (more than 10000).
2027 kes Fix maxruntime bug #621.
2029 ebl Implement the include JobID in spool file name project.
2030 kes Reorder projects file in order determined by Jan 2007 vote.
2031 kes Implement item #12 on project list -- quick release of FD by
2033 kes Fix open of SQLite3 db where user does not have write permission
2034 so that DIR does not crash. Fixes bug #761.
2036 kes Add back missing @ in Win32 Makefile.
2037 kes Change 'Device not configured to autolabel' from INFO
2039 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2040 which should restart an indefinite # of times.
2041 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2042 other DIR specifications.
2044 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2045 Fix path quoting in SQLite scripts.
2046 Fix problems with SHGetFolderPath.
2048 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2050 kes Fix Job restart on error bug that promotes an Inc to a Full
2051 backup. This should fix bug #755.
2052 kes Add qt-console and first cut of code.
2056 kes Fix Bacula->Documentation link on Win32 to point to index.html
2057 instead of bacula.html. Fixed bug #750.
2058 kes Return JobId in db_get_job_record() when JobId==0. This should
2060 kes Do not release source pointers when restarting a failed job.
2062 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2063 This *should* fix bug #747.
2064 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2067 kes Modify USTORE constructor to set an empty store_source string,
2068 and don't copy the store_source string in a cancel. Hopefully
2069 this will fix Arno's seg fault, bug #744.
2070 kes Add back code to disable conio in configure. Fixes bug #743.
2071 kes Correct the Options scanner in the FD to correctly handle
2072 SHA1 option, which was eating the next option. Reported by
2074 kes Add code to indicate when the SD is spooling, spool wait, and
2075 despooling as requested by Alan Brown.
2077 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob