1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
34 kes Apply Eric's patch to ensure that autoprune does not return
35 a Volume not in the autochanger unless requested to do so.
36 kes Correct bat restore display of multiple drives. This fixes
38 kes Do find_a_volume() each time an unload is done. This
39 fixes the failure of maxvol2-test.
41 kes Add some SD debug code.
42 kes Do find_a_volume() each time an unload is done.
43 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
44 and adds --with-db-port to ./configure.
45 kes Use Qmsg() in job.c watchdog callback.
47 kes Release main control rwlock if ABORTing.
48 kes Make watchdog connect timeout queue messages rather than sending
49 directly to avoid lock conflicts with the real thread.
50 kes Add const char in dbd.c to avoid compiler warnings.
51 kes Fix python compiler string warning. Note, IMO the GNU C++
52 compiler guys have made a *very* bad change to their compiler.
53 They now force all strings to be 'const' unless you explicitly
54 cast them, which is extremely ugly and ruins nice code as well
55 as creates a lot of useless work.
57 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
58 mt. This fixes bug #1116.
59 kes Add const in python files to reduce compiler warnings.
60 This may have to be backed out because of later compiler
62 kes Fix failure of 2drive-concurrent-test. Always read label;
63 clear_unload() only after drive is defined in acquire_for_read().
65 kes Generally clean up the manual tape loading code. The main
66 conceptial change is that when a volume is marked to be unloaded,
67 its volume name is retained, and it is only marked as unloaded
68 when either the autoloader says it is unloaded or another tape
69 is read on that drive.
71 kes Add debug code and refactor subroutine in stored/mount.c
72 kes Fix format problem in bscan output reported in bug #1105.
73 ebl Fix get_next_volume_for_append logic with autochanger
74 - use pruned volumes if found
75 - don't reset the inchanger flag after getting a recycled volume
77 Fix recycle_oldest_purged_volume to take InChanger flag in account
79 ebl Add mmap/unmmap implementation for tokyodbm under win32
81 kes Make first step toward eliminating globals from config
82 scanning. Also should be a workaround for FORTIFY_SOURCE
83 GNU C bug -- fixes bug #1042.
85 kes Apply duplicate job tests to restarted jobs.
86 kes Copy more data when restarting a job so that run
87 overrides are kept. This should fix bug #1094.
89 kes More word alignment cleanup.
90 kes Fix bug where SD did not ask operator if the device could not
91 be opened. Reported by Eric.
93 kes Add dbuser to DIR conf file (replaces user).
94 kes Add --with-db-password to ./configure
95 kes Fix regress to handle db_password.
96 ebl Add new "status storage slots" that list autochanger
98 ebl Update vtape driver to compile only under linux.
99 ebl Fix a bug when restoring with a wrong mediatype.
101 kes Eliminate ints from conf files and structures to avoid
102 word alignment problems
104 kes Fix bug reported by Scott Barninger where the bacula script
105 refers to scripts in the wrong directory. Needed to meet the
106 requirements of recent FHS location changes.
107 ebl Disable vtape for FreeBSD.
109 ebl Modify disk-changer to check if slot contains something before
112 ebl Fix vtape on win32 and debian.
113 ebl Fix autoselect patch (cause segfault).
115 ebl Fix autoselect option broken for a while. Fix #1089. Need some
116 work with StorageId to be able to use a particular drive in a
119 ebl Rename faketape to vtape.
120 ebl Update faketape driver.
122 ebl Modify faketape driver to avoid sparse file.
123 kes Add make clean of qt-source directory during ./configure
124 kes Store last block number written to tape in DEVICE and
125 use it for testing for correct last block on EOT.
127 Release Version 2.4.0:
131 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
132 This fixes bug #1095.
134 kes Add create_postgresql_database.sql to Win32 installer. Should
135 fix problem reported by Juilio Monteiro.
136 kes Get correct slot when auto unloading a device. This fixes bug
139 kes Fix multiple media restore.
140 kes Make DEVICE Slot private and access it via a method.
141 Allows better control over when it is set and cleared.
142 kes Fix possible seg fault if SQL error.
144 kes Add Martin's fixes to argument scanning for the estimate
145 command. This fixes bug #1093.
146 kes Add debug code to SD.
147 kes Fix renaming a Volume, which used the wrong Volume name.
149 kes If operator has rewind tape, print warning, release tape and
150 try once more. If tape is positioned somewhere, something went
151 wrong, so mark the tape in error and try once more. Previously
152 this error was fatal, now it produces an error message.
153 kes Ensure correct volume name displayed during restore
154 kes Ensure that Volume is mounted for restore.
156 kes Fix a few more Coverity reported problems.
158 kes Apply Allan Black's status dir job count patch.
159 ebl Add information about IMPORT/EXPORT slots in mtx-script.
160 kes Enhance a couple of SD debug messages.
161 kes Tweak unload flag setting and ensure it is set during swap.
163 ebl Fix #1091 about bad output in estimate command.
165 kes Modify autochanger locking to attempt to avoid race
167 kes Make sure device not busy before doing label command.
168 kes Display open() errors except when polling. Previously too
169 many were suppressed. This should fix bug #1070.
170 kes Fix Win32 reparse points. Bacula will not recurse into any
171 reparse point directory, including mount points, unless the
172 directory is explicitly mentioned at the top level (same as
173 with Unix). A file that is linked to another file will be
174 backed up -- much as Unix does for hardlinked files.
175 This fixes bug #1041.
177 kes Remove double quotes from ChangeLog and ReleaseNotes
178 kes Remove StorageId test when pruning and recycling (Eric's changes).
179 kes Remove old form of locking when getting volumes -- causes deadlock.
180 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
181 the name unique and to eliminate compile time error.
182 kes Add accurate.o to Win32 FD Makefile
184 kes Fix cats dll build on Win32 after db_update_job_end_record
185 calling sequence change.
186 ebl Switch to tokyo dbm instead of htable in accurate code
187 ebl Include tokyo dbm to bacula source tree
189 kes Fix buffer overruns detected by Coverity.
191 kes Tweak joblog display.
193 kes Implement --without-qwt
194 kes Fix layout of restore tree dialog
195 kes Add configure bat QWT libraries, so that bat can be built
196 with or without the QWT libaries.
198 ebl Add dummy tape driver for regression tests.
199 kes Make sure we unload the right slot when swapping.
201 kes Add debug times, reduce size of two-pool-changer test
203 ebl Tweak autoconf scripts for faketape
205 kes Improve SD reserve debug code.
206 kes Testing an improvement to free up volumes no longer in use.
208 kes Rework SD acquire for read to handle autochanger Volume
210 kes Implement regression that explicitly tests swapping a Volume
211 from one drive to another.
212 kes Enhance disk-changer to detect most error conditions.
213 kes Fix SD code so that it properly swaps a Volume between drives.
214 This fixes bug #1083.
216 kes Apply libdbi patch from Joao Freitas for regress and for
217 Bacula trunk. Regress now works with libdbi. Nice.
218 kes Apply .nobackup patch from bug #1077 submitted by
220 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
221 name into jobs cloned via the run directive.
223 kes Prevent a Volume that is being swapped from being freed from
224 the volume list. This will most likely fix, at least partially,
226 kes Fix strippath so that it does not get a buffer overrun and crash FD.
227 This fixes bug #1078.
228 kes Remove 50 millisec wait in SD that broke debugger.
229 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
230 that a job may run, counted from when the job was scheduled.
231 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
232 a job may block waiting for a resource, counted from when the job starts
233 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
234 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
235 that implements multiple commands per line in the console when using
236 readline. Modify the default to use a semicolon as the command separator.
238 ebl Fix SQL query in migration code.
239 ebl Make accurate mode with hash disk pass regression tests
241 ebl Implement first cut of accurate backup with hash disk.
243 kes Force unload of volume when wrong volume mounted in SD.
245 kes Fix bat seg fault at termination.
246 kes Add Bacula generated version to bat about box.
249 kes Experiment with allowing multiple read jobs.
250 kes Move final volume swapping code to DCR method and
251 call it from acquire_for_read().
252 kes When wrong volume is mounted during read, unload_autochanger.
254 kes Integrate the libdbi changes from Joao Henrique Freitas
256 kes Stop searching for Volumes in SD askdir if DIR returns the
257 same volume name twice in a row.
258 kes Close bat console windows first to eliminate error message
261 kes Tweak the swap Volume from one drive to another code so that
262 it now seems to work.
263 kes Resolve several problems with recycling that broke the new
264 code (these problems are in 2.2.9 as well).
265 kes Remove the volume lock when calling the sysop code.
266 kes Don't mark a reserved volume with no writers as unused otherwise
269 kes Rework class structures for VOLRES, DCR, and DEVICE to make
270 the method names a bit more logical, and for more logically
271 handling the responsibilities.
273 kes Remove redundant code in terminating the scheduler that just
274 causes a seg fault in many cases.
275 kes Cleanup releasing a volume and make it a DCR method.
276 kes Improve algorithm for detecting pre-reserved volume and
279 kes Tweak volume swapping code so it works.
280 kes Correct name overloading in mount.c
281 kes Replace released flag in VOLRES with reserved and add access
282 methods for the VOLRES class.
283 kes Prevent volume from being released while being swapped.
284 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
286 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
288 kes Refactor parts of stored/mount.c
290 ebl Add sanity checks for VolWriteTime and VolReadTime
291 ebl Take care of bad clock changes while computing VolWriteTime
292 and VolReadTime. This should fix or limit #1066
293 kes Correct error string numbers in dird/catreq.c
294 kes Restructure reserving, acquiring, and mounting volumes. Calls to
295 autochanger are deferred for mount.c -- simplifes the code.
297 kes Do not prune any running job. It just fails the job.
298 kes Lock the volumes when changing dev->reserved_device and marking
299 the volume unused otherwise the device can get reserved by
300 another job before the volume is released, thus blocking it.
302 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
303 kes Fix bug #1063, reuse of freed ptr in list nextvol.
304 kes Release regex compile buffer in filed/job.c
305 kes Add proper type of const char in sql_create.c
306 kes Turn off debug in daemon termination routines
307 kes Move free_volume_list() before devices are freed in stored.c
308 kes Fix reference to uninitalized stack variables in bregex.c.
309 This should correct bug #1067.
311 kes Fix possible seg fault in SD when freeing a volume entry.
313 kes Implement unload_dev() before swap device.
314 ebl Add statistics prunning with option and menu
315 kes Separate unload_dev() from unload_other_device() in autochanger.c
317 kes Apply patch from bug #1069 that corrects spurious error messages
318 when ACLs enabled on SGI but no ACL exists.
319 ebl Fix small segfault in bacula-sd when debug level is 500
320 kes Modify run_program() and run_program_full_output() to use
321 call by reference for the results string. This corrects a long
322 standing problem where the address of the string may be changed
323 in the subroutine but not in the calling program.
325 kes Re-enable code to remember last volume mounted on a non-tape
327 kes Add patch supplied in bug #1068 that fixes a SD crash when using
328 a Virtual autochanger.
329 kes Generate correct JobMedia records during spooling/despooling when
330 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
331 <tih@hamartun.priv.no> for excellent analysis and testing.
333 kes Tweak hash algorithm for htable using Martin Simmons idea
334 for doing a circular shift.
335 kes Remember what volume is in VTLs (previously turned off for
337 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
338 pointed out some problems in creating JobMedia records during
339 spooling with concurrent jobs. Fix the problem by updating the
340 start file position before despooling and generate a jobmedia
341 record at the end of despooling.
343 kes Fix handling of JobMedia records during spooling and when a
344 Volume is changed without actually writing data to the Volume.
346 kes Rework certain SD locking based on gdb tracebacks of deadlocks
347 sent by Eric. This code now uses only the volume_lock() rather
348 than the reservations lock when at EOM and acquiring a new
350 kes Ensure only one exit point in several subroutines.
352 kes Implement bsock code to permit locking. Use the new code in Verify
353 in the FD to prevent the heartbeat thread from disrupting the Verify
354 data sent to the Dir.
355 kes Modify SD locking to eliminate locking the reservations system from
356 outside the system. Use the volume lock when getting media data
357 and reserving a new volume at end of media.
358 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
359 when SD starts are not locked into place.
361 kes Fix error compiling runscript code on 64 bit machines.
362 kes Tweak Win32 mount point code.
363 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
364 cleared giving bad file estimate).
365 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
368 kes Keep Schedule run lists in order as suggested by
371 kes Implement autostart scripts for Debian.
372 ebl Implement upgrade catalog scripts.
374 ebl Apply jobstat patch for long term statistics. Have to implement
375 purge stats command and upgrade scripts.
376 kes Fix mtx-changer.in for broken Debian mt program.
378 kes Fix large number of JobMedia records reported by Eric Bollengier.
380 kes Apply doc fix from bug #1062.
381 kes Resolve crash and improper restore wx-console Win32 restore
382 GUI. Fixes bug #1065.
383 kes Update Win32 wxWidgets to latest version.
384 kes Attempt to do correct handling of Win32 mount points. Should
386 kes Fix Win32 FD backup/restore memory leak due to improper termination
387 of BackupRead/Write. This fixes bug# 1038.
389 ebl Reduce memory usage for accurate backup, working only with ctime
390 and mtime. (not all Lstat field)
391 About 40MB for my linux system (400.000 files)
393 kes Add dcr->reserved_volume flag that allows us to release a volume
394 even if it is not vol->released. This allows maxvol2 to work when
395 Volumes expire and we are already writing to the device (i.e. a
396 volume is pulled out from under us by another job terminating after
397 we reserve the drive).
399 ebl Permit multiple command/console per runscript definition.
400 RunScript { command = /bin/true ; command = /bin/false ... }
401 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
402 (restart an application) just after the VSS snapshot on windows.
403 kes Don't zap dcr values during release_volume() as they might
404 have the next Volume to be mounted.
405 kes Fix AIX prototype.
407 kes Second cut of drive switching during backup.
410 kes Update Win32 version of wxWidgets to most recent version.
411 kes Tweak Copy job details.
412 kes Rework dir_find_next_appendable_volume to make a bit more effort
413 to find a suitable volume before giving up.
415 kes Make ask_sysop_to_create... to return if waken from wait.
416 This helps get out of blocked conditions.
417 kes Experimental implementation of switch_device in reservations.
418 kes Implement FD version to allow easier protocol changes.
419 kes Add Plugin Options string -- not yet passed to FD.
420 kes Implement PluginOptions ACL.
422 kes Attempt to correct problems with restores with autochangers and
423 use counts going negative
424 kes Rework SD status command and implement API for bat. Implements
425 header, runing waitreservation, devices, volumes, spooling,
426 and terminated status keywords.
427 .status storage=xxx <keyword>
428 kes Clarify TLS error message by adding double quotes around name.
429 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
430 kes Pass jcr to tls routines so debug messages can be handled better.
431 kes Rework jobq resource allocation code, and possibly fix a bug
432 that caused reference counts to get out of sync.
434 kes Rename fd/dir plugin to use Bacula standard underscore.
435 kes Plugin work -- bring dir up to fd level.
436 kes Start implementation of VTL code
437 kes Fix Win32 build after adding new cats subroutine.
439 kes First cut at Duplicate Job implementation.
441 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
442 kes Start PluginOptions string, and refactor a bit of ua_run.c
443 ebl Apply Allan patch that permit to reset recyclepool.
445 kes Test patch -- possible fix or improvement for bug #1053
446 kes Refactor FD and SD status commands to permit new API code in
447 SD, and to fix Win32 build.
448 kes Win32 build is now working.
450 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
451 some ideas in patch from Scott Bailey.
452 kes Begin implementation of duplicate Job control.
453 kes Fix some of Win32 build after recent additions.
454 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
455 which causes the FD to detect whether or not the OS has the
456 honor no dump bit (*BSD systems), and if so, to skip backing up
457 any file with this bit set. The feature is enabled by setting
458 'honor no dump flag = yes' in the Options section of a FileSet.
460 kes Correct po warning message with datarootdir
461 kes Implement more code in dird.c to put configuration parsing in
462 a class rather than use globals.
463 kes Restructure SD status command for implementation of bat API
466 kes Suppress incorrect 'Will not descend from x into y' messages.
467 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
468 daemon globals used by parser.
469 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
471 kes Fix free of plugin_list when none exists.
473 ebl Apply accurate project patch.
475 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
476 on non-mempool object)
477 kes First cut of converting FD .status to work with bat API.
479 .status client=XXX header
480 .status client=XXX running
481 .status client=XXX terminated
482 kes Implement first cut of Copy Job.
483 kes Implement Catalog in Pool resource. It overrides catalog specified
484 in the Client resource.
486 kes Apply patch (with some difficulties) from Joao Henrique Freitas
487 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
489 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
490 ftruncate() actually works. In the case of some (cheap) NAS devices,
491 it does not, and so recycling NAS Volumes does not work. The code
492 simply unlink()s the file, then recreates it. This fixes bug #1011.
494 kes First incomplete cut of big malloc blocks for htable.
495 kes Tweak plugin code.
497 kes Plugin debug code + tweak a couple bat dialog layouts
499 kes Fix creating first JobMedia record during Migration to include
500 proper index. This caused slow restores of migrated jobs.
501 kes Temp fix to plugin name file_index.
502 kes Bacula backed up and restored a MySQL database.
504 kes Implement plugin restore.
505 kes Implement parsing of db_driver to give db_type index.
507 kes First cut of plugin restore code.
508 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
509 and do not strip paths on symbolic links.
510 kes Set catalog backup database and user name from values specified on
511 the ./configure line.
512 ebl Fix #1031 about wrong pool source information in job report.
515 kes Remove a redundant jcr argument to find_files, match_files, and
517 kes Implement '.status dir header|scheduled|running|terminated' that
518 prints the requested status section. With the exception of the
519 header, the other reports have fields separated by tabs (\t).
521 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
522 a resource embedded run command to find a since time if no explicit
523 since time was supplied on the command line.
524 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
525 that updates the state file at job termination time in addition to
526 when the daemon terminates.
528 kes First version where a plugin did a backup.
529 bpipe-fd.so created a backup file, wrote a test
530 string to it, and Bacua could restore this fabricated file.
532 kes Implement DB Driver = string for the DBI driver.
533 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
534 kes First cut of code for loading Win32 plugin dlls. Implement
535 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
536 and implement a dlfcn.h file based on opengroup's definitions of
539 kes First cut plugin directives.
541 kes Apply patch from bug #1049 to prevent stripping the path on a
543 kes Attempt to fix bug #1047 where stripping a path corrupts the
544 heap. Waiting for feedback.
545 kes Correct the Mount message not to suggest labeling a new tape
546 when doing a restore. Submitted by email by John Stoffel.
547 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
548 FD by using casting. Reported in bug #1042.
550 kes A bit of crypto cleanup. More later.
552 Release Version 2.2.8
554 kes Apply patch from Martin to correct bug #1040, bscan sets existing
556 kes Fixed important spelling error in doc -- bug #1045.
558 ebl Fix bextract to be able to extract non-portable Win32 data to
560 kes Move initialization of read/write res lock earlier in the code.
561 This fixes the crash with a null conf file. This fixes bug
563 kes Redefine CURES in lib/parse_conf to be URES and move it all
564 into lib/parse_conf.c -- this responds to bug #1042, but does
565 not fix it. The fix is not to compile with FORTIFY_SOURCE.
566 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
567 the trunk SVN. I don't think this was reported as a bug.
569 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
571 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
573 kes Add DataDespooling and DataCommitting status (committing is
574 the last despooling).
575 kes Finish implementation of new reservations code noted below.
577 kes Fix bsnprintf for float point numbers. I broke recently when
578 parameterizing some variables. This fixes bug #1036.
579 kes Undo recent reservations changes ... will apply them later
580 when they work better.
582 ebl Fixes #1034 which cause mysql to hang the connection after 8h
583 ebl Change default statistics target of filename.name and path.path
584 fields for PostgreSQL. This speeds lookup by indexes. Thanks
586 kes A few more tweaks to new reservation code. Make sure to clear
587 vol released flag when retaking volume. When reading label and
588 label is bad mark volume unused. When recycling, mark volume
589 unused so it can be renamed.
591 kes Fix reserve_volume() so it doesn't release a volume in use
592 (i.e. a volume entry not marked released). This should be
593 the last part needed to fix bug #1018.
595 kes Move Heartbeat documentation from Job to Director resource.
596 This fixes bug #1033.
598 kes Fix existing switch drive SD code to call autochanger to release
599 any old volume. This must be done to keep the autochanger from
600 releasing subsequently newly reserved volumes in doing a close().
601 This should fix bug #1018.
602 kes Fail if attempting to get console input in batch mode. This
603 should help fail RunScript console commands that are incomplete.
604 kes First cut implementing switch_drive() in SD (not actually called).
606 kes Implement first cut running console commands in a RunScript.
608 ebl Fixes bug #1028 where 'Selection Type' option was not usable
610 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
613 Release Version 2.2.7
615 kes Add new free_tls() entry point so that Win32 builds.
616 kes Fix compile warning in src/lib/util.c
617 kes Fix entry point for edit_job_codes() so that Win32 builds.
618 kes Fix seg fault Frank Sweetser reports in regression testing
619 on his systems. The problem was that the original author of
620 bsnprintf.c did not take into account the side effects of
621 using ++x in the argument to a #define.
622 kes Make SD protocol backward compatible with version 2.2.x.
624 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
625 because Bacula no longer restores sockets.
626 ebl Always use ignorecase fileset option on win32 FD.
628 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
629 that implements double quoting include names in conf files,
630 and also allows piping input by having the first character
631 be a vertical bar (|).
632 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
633 that implement %f in RunScripts to pass the FileSet name.
634 kes Skip leading | when lex input comes from a pipe as suggested
635 by Michael Stapelberg <michael@stapelberg.de>.
637 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
638 Nerijus Baliunas <nerijus@users.sourceforge.net>
640 kes Implement Plugin Directory and plugin events.
642 kes Implement a security enhancement: TLS authentication but no
643 encryption. Enabled by setting 'TLS Authentication = yes'.
644 Note when this is on, TLS encryption is turned OFF!
646 kes This patch corrects a problem where the maximum concurrent storage
647 jobs counter gets out of sync during restore jobs causing jobs to
648 'wait on max Storage jobs'. This patch fixes bug #1009.
650 kes This patch fixes bcopy so that it produces correct Volumes.
652 kes This patch eliminates spurious output to the console during a VerifyVolume
653 job that contains encrypted data. It fixes bug #1024.
655 kes This patch prevents the 'status dir' command from trying to use a scratch
656 volume and possibly moving it from one pool to another. This patch fixes
659 kes Add new include to postgresql.c suggested by Marc Cousins so
660 that it compiles correctly with pgre version 8.3.
662 kes Fix --archivedir addition to configure. Replace it with
663 --with-archivedir in configure.in This fixes the regression
665 kes This patch fixes bug #1012 where the job is canceled because
666 of Max Run Time exceeded when the job has not yet started.
668 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
669 one 'part' to write. Instead of each part being stored on disk,
670 written to DVD, then deleted from disk, all parts are written to disk,
671 and only the last is written and deleted from disk.
672 kes This patch fixes the status command to include the formating string for
673 JS_AttrInsterting. It fixes bug #1021.
674 kes This patch should fix the Mac OS X build problem on the latest
675 Darwin, where sys/types.h was not included correctly (apparently
676 due to a change in the Mac headers). The solution was to explicitly
677 ensure that it is defined for the ./configure.
678 This patch also has a rebuild of configure that includes the Debian
679 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
680 kes This patch should ensure that queued messages to the console are
681 displayed as soon as possible. It should fix bug 1007, but has been
682 reported not to work.
684 kes This patch fixes the infinite loop when trying to increase the
685 maximum number of volumes in a Pool during the add command.
686 This patch fixes bug #1008.
688 Release Version 2.2.6
690 db Remove extra data on estimate command in joblist for bat.
692 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
693 really change anything, but is the beginning of doing it *right*.
694 To do it completely right the LastWritten date must be passed to
695 the SD, but it is not yet done.
696 kes Minor tweaks to some bat restore SQL.
697 kes This patch fixes bug #1003 where putting the message output from
698 a Verify job into the catalog results in a recursive loop. The problem
699 seems to show up only with postgresql (to be verified).
700 kes Correct %x to %p in postgresql debug statement.
702 kes Fix bug #942 where lots of emails where generated when the heartbeat
703 interval was low and Bacula wanted a different tape from the one in
706 ebl Add new SD despooling attributes and Dir inserting attributes
707 job status codes in the catalog (Status table).
709 ebl Use qmake-qt4 instead of qmake when available (debian system).
711 kes Add a security warning to src/cats/make_catalog_backup.in indicating
712 that passing the password via the command line (arg 3) is insecure.
713 This responds to bug #990 (it doesn't fix it).
715 kes Set default debug_level to zero. This corrects bugs #991 and #993.
716 kes Fix a crash in bat when it cannot connect to the Director for example
717 if the Director is not running.
718 kes Remove redundant INDEX (JobId) from File table in the trunk.
720 kes Make explicit exception to GPL in LICENSE to permit linking
721 the Win32 FD with Microsoft VSS code.
722 kes Apply the Solaris package patch from
723 Masopust, Christian <christian.masopust@siemens.com>
724 kes Apply the patch to optionally add a timestamp in the debug output
725 submitted by Mariusz Czulada <manieq@wp.eu>.
727 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
728 backend (sql_strerror). Fixes bug #989
730 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
731 It applied with no problems.
732 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
734 kes Redirect stderror to stdin on mt status command in mtx-changer.in
735 since the status is returned on stderr on Solaris.
736 kes Activate Close button on tray-monitor window. This fixes
738 kes Check for NULL item in parse_conf.c before calling it. In the
739 case of Device, there is no item and this caused a seg fault when
740 Device appears in the conf file.
741 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
742 avoids pulling in config.h multiple times in some new code.
744 kes Fix spurious warning message printed when creating a volume with
745 a LabelFormat. This fixes bug #976.
747 Release Version 2.2.5
749 kes Add JobId in place of Job name in all the Jmsg() output.
750 kes Correct the APP_DESC for the Win32 storage service (remove an e).
752 kes Make maxvol-test and new more strict maxvol2-test work.
753 kes Print JobId in all Jmsg() job output.
755 kes Add new SD despooling attributes and Dir inserting attributes
756 job status codes. This fixes bug 961.
757 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
759 kes Fix doc issue. This fixes bug #963.
760 kes Fix listing performance problems in bat. Pointed out by
762 kes Remove old debug code.
763 kes Fix bat code that tests for Win32. This should fix bug #968
764 kes Query 5 list wrong Vol after migration. This fixes bug #960
766 ebl Fix #969 where user can't change Replace option in restore menu.
768 kes Save jcr in thread specific data (tsd) for each thread.
769 kes Make Dmsg() print JobId as -%u.
770 kes Make Jmsg, Emsg, and others automatically pickup the jobid
771 for the thread if it exists.
772 kes Remove old reservation debug jid code.
773 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
774 ebl Add an option that permit to specify spool size in job
775 definition. (Applying patches/testing/spoolsize_per_job.patch).
776 You must upgrade SD and DIR at the same time.
777 dvl Add new configuration item --archivedir
778 dvl Adjust regression tests to use tmp not /tmp. This will allow
779 multiple concurrent runs of the regression tests.
781 kes Fix race condition that drops final block written to volume.
782 This happens in rare cases with multiple simultaneous jobs
783 when the Volume fills. This fixes bug #964. May be related
784 to bug #935 and possibly #903.
785 kes Eliminate more strerror() and replace with bstrerror().
786 kes Remove BSD getopt and replace with unrestricted IBM version.
787 kes Fix Win32 build for changed calling sequences.
788 kes More tweaks to the mount volume routines to get everything
789 right. Changed variable name from find to have_vol, which is
790 much easier to understand.
791 kes Enhance btimer debug code.
793 kes Fix FD->SD authorization failure, which was due to spurious
794 wakeups from a pthread_cond_timedwait(). Simply check the
795 predicate before continuing. This fixes bug #953.
796 kes Add const char where needed (more to do). Remove temp debug code.
798 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
799 kes Don't overwrite error message in check_tables_version.
801 kes Unlock batch insert tables with same calls used elsewhere.
802 kes Allow starting 59 jobs a second.
803 kes Make SD session key more random.
804 kes Add retry for SQLite opening db if it fails. Probably helps
806 kes Suppress extra error messages during batch insert failure.
808 kes Add jcr to timer packets so if killed message can be sent to job.
809 kes Add JobId to all Dmsg() output.
810 kes Put some FD auth code on dbglvl rather than fixed.
811 kes Return insert attributes error message in db msg buffer to avoid
812 false error messages. Helps fix bug #966.
813 kes Separate batch init error messages. Probably helps fix bug #966.
814 kes Make SD code that contructs attribute insert check string lengths
816 kes If Dir gets an error during inserting attributes, cancel SD.
817 This reduces unnecessary error messages.
819 kes Correct search boolean for getting Volume info
820 ebl Cleanup batch insert code. Probably fixes bug #965.
821 kes Back out one small change to the reservation system (reserving a volume).
822 kes Rework how a Volume is mounted. It is now much more intelligent and
823 will always attempt to use any mounted volume if possible and reduces
824 calls to the Director asking about volumes.
826 kes Turn off some code when batch insert not enabled.
827 kes Edit FD name in connect error messages.
828 kes Rework the reservation system to take into account that the Director
829 might give us a Volume that is different from the current one being
830 used, and to ensure that we don't exceed Maximum Volume Jobs.
831 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
832 fatal error with multiple jobs running'
833 kes Add more debug code in reservation system.
834 kes Implement maxvol-test to check bug #947.
836 kes Add code to handle tray monitor separated from Win32 FD.
837 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
839 kes Add missed return in fixing verify bug -- trunk only.
840 ebl Fix a command parser issue causing a director segfault.
841 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
843 kes Increase the max block size to 4MB fixes bug #957.
844 kes ERABT if user sets min block size > max block size. Fixes bug #956.
845 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
846 is not properly mounted (recognized) during a poll.
847 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
848 Job that has differences reports Verify OK.
849 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
851 ebl Add an option to operate on all pools with update vol parameters.
852 This complete the project 20. Patch from Nigel Stepp.
853 ebl Add history support to bconsole when using readline.
854 Using Ctrl-D to exit doesn't update .bconsole_history
855 kes Modify new volume algorithm to use max MediaId for generating next
856 volume number rather than the count of Volumes. This should essentially
857 eliminate the failure rate if some volumes were deleted. Bug #921.
858 kes Begin implemention of Optimize Job Scheduling.
859 kes Implement restore callback that Dirk and I agreed on for bat
860 restore. This fixes bug #928. Restore of backup of zero files fails.
861 kes Fix SQL Catalog logging which broke with new db_escape_string
864 Release Version 2.2.4
866 kes Fix bacula_cats.def for new db_escape_string().
867 kes Increase size of name string when FD making connection to SD.
868 May fix bug #953. FD->SD connection failure.
870 kes Add code to help Dan debug 2drive-incremental-2disk test.
871 kes Add code to try to fix bug #908.
872 kes Add waits to multiple exit detection code to try to force pid
873 file to always be deleted.
874 kes Restore good dev.tar.gz to rescue set appropriate binary property.
876 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
877 trying to switch drives by checking for blocking before unblocking.
879 kes Cancel storage daemon in all cases where FD reports error. This
880 should fix virtually all cases of bug #920.
881 kes Fix db_escape_string() for MySQL which did not compile.
883 kes Fix error message that was clobbered when Dir tells SD it does not
884 have write permission on Volume. This should fix a minor point
885 in bug #942, but not the main problem.
886 kes Add code to cancel job in SD if FD connection fails. This should
888 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
889 dvl Pass jcr and db into db_escape_string() to enable better escaping
891 kes Fix migration code to get correct Volume name with multiple volumes
892 by skipping |. Fixes bug #936.
893 kes Implement patch supplied by Landon to fix bug #944 where using
894 TLS with bconsole uses 99+% of the CPU.
895 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
897 kes Move patches into patches directory.
899 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
902 ebl Using 'm' in bconsole will show messages like before,
903 and not memory usage.
904 kes Fix bug #935, and probably also bug #903 where files were not
905 restored. MediaId was not properly set in JobMedia record after
908 kes Suppress chown and chmod error messages if the FD is not running
911 kes Apply Martin Simmons' patch that should turn off the new API usage
912 when batch insert is turned off allowing building on older
914 kes Add ./configure search in qwt-qt4 for qwt package
916 kes Bacula is now free of 3rd party GPL copyrighted code!
918 kes Add guid_to_name.c/h which replace idcache.
919 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
921 ebl Detect if new PosgreSQL batch insert API is present.
922 kes Correct incorrect mempool call causing Director crash. Occurs on
923 systems without va_copy().
924 sb Update spec files for 2.2.1 release
926 kes Fix memory pool call in ua_output.c. bug #934.
927 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
928 Add test program to fnmatch.c
930 kes Integrate patch to README.vc8 from
931 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
932 edit it to get it into Unix patch format.
933 kes Implement mkpath.c to replace old FSF makepath.c
935 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
937 Release Version 2.2.1
939 kes Update POTFILES.in
940 kes Cleanup a few underquoted AC_DEFUNs in configure
941 kes Apply patch from Martin Simmons that adds a test for va_copy to
944 kes Fix bug #921 by increasing the number of tries to create a new volume
946 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
947 can be called multiple times. Implement a version for machines
948 without va_copy() that gets a big buffer.
950 kes Integrate more portable zone offset code into bsmtp.c
951 Submitted by Attila Fülöp.
953 kes Fix bad SD->FD return status reported by
954 (James Harper) <james.harper@bendigoit.com.au>
955 ebl Fix a bug in read_close_session which return random status
956 thanks to James Harper
958 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
959 and directory names during restore of single file/directories.
960 kes Add sanity checks to .sql command when string is empty. Hopefully
961 that will resolve Dirks Director crash.
963 kes Apply patch submitted by Martin Simmons that corrects a seg fault
964 in the bsmtp chat subroutine when debug is >= 10.
966 kes Fix Director crash when running bat SQL queries.
967 kes Add David's notes on Item 8: Copy pools.
969 kes Rework projects file to be current and ready for a vote.
970 kes Enhance lex scanner error message.
972 kes Tweak LICENSE file to mention BSD code.
973 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
974 if specified on the ./configure.
975 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
976 This class is intended to allow us to open a second bsock to the
977 Director while in the restore subdialog.
979 kes Fix configure to create bat Makefile before creating dependencies.
980 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
981 kes Add a tooltip to the tray monitor.
982 dvl Set the Director's PID file before dropping privs. This fixes
985 kes Update AUTHORs file
986 kes Increase the default max concurrent jobs to 20 in FD and SD to
987 correspond with the default .conf files.
988 kes Rewrite the Win32 service routines. This eliminates the 3 copies
989 some different, of the same file created by RN when porting the
991 kes Rearrange some of the Win32 directories and the placement of the files
993 kes Set DEVELOPER flag in version.h
995 ========================================================================
996 Release Version 2.2.0
998 kes Apply a second doc patch from Marc.
999 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1000 improves the tips section that discusses how to setup multiple
1003 kes Update bat README file.
1004 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1005 corrects a typo in the Recycle status check in db_find_next_volume().
1006 This will probably fix a number of annoying problems with multiple
1008 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1009 bnet calls -- no functionality change.
1011 kes Modify the Verify output to specify if files are missing on
1012 the Volume(s) or disk. Fixes confusion in bug #916.
1013 kes When more than one Volume is read in a migration job, the last
1014 Volume bytes reported are from the last read volume rather than
1015 the last written volume. Fixed. This fixes bug #910.
1016 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1017 It previously printed New Recyle flag is: no. This fixes bug
1020 kes Correct seg fault when switching tape drives during restore.
1021 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1022 be used until after 2.2.0 release.
1024 kes Remove fnmatch() in SD that permitted wild card specifications.
1025 This fixes bug #914.
1027 kes Fix %g in filename returned by SQL for browse tree reported by
1029 kes Fix configure so that it puts config.out in the cwd rather than
1031 kes Attempt to fix the locking problem reported by Eric in bug #906.
1032 kes Make berrno class to leave errno unchanged after constructor call.
1033 kes Make bnet_server use the heap rather than the stack to allocate
1034 its socket fd pointers to avoid a crash at termination. Problem
1035 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1037 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1038 and putting it in depkgs-qt along with Qt4.3.
1040 kes Rework code in acquire.c that switches drives for reading when
1041 the Media Type does not match. This should fix bug #906
1043 ebl Fix a director segfault during job setup #907
1044 kes Correct seg fault in postgresql when first operation returns no
1045 rows. Fixes Dirks File browser problem seg fault with bat.
1047 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1048 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1051 kes Implement PopUp YES/NO dialog for bat.
1053 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1055 kes Correct RunScript to terminate job in FD on failure.
1056 kes Change abort_on_error and AbortJobOnError to fail_on_error
1057 and FailJobOnError in RunScripts.
1058 kes Minor tweaks of code formating in RunScripts, principally to
1059 avoid depassing 80 columns.
1061 kes Eliminate one #ifdef Win32 in bsmtp
1062 kes Implement grow tool to grow a file for testing very large databases.
1063 kes Add big-vol-test to test Bacula seeking with > 5GB.
1066 kes Modify find_next_volume() to return all values in Media record.
1067 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1071 kes Update Release notes
1073 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1074 Warning, in previous beta version, all media get from scratch keep their
1077 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1078 This should fix bug #842. Made a note to look at removing the temp
1079 files at the end of the install.
1080 kes Add ability to mount and unmount a file device providing it is
1081 marked as being removable and has the appropriate mount and unmount
1082 commands defined in the Device resource. This fixes bug #830.
1083 kes When applying a storage override, release all previous storage
1084 definitions rather than just prepending the new storage.
1085 This should prevent a good deal of confusion.
1087 kes Implement ./configure search for qwt libraries.
1089 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1090 Win32 FD. This should fix bug #893.
1091 kes Remove an unnecessary beep in Win32 init code.
1092 kes Update copyright dates in Win32 executable about boxes.
1093 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1094 code with a BSD getopt.c and getopt.h.
1095 kes Remove sched.h from the Win32 compat directory -- not used.
1096 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1097 need to shut it down, do it through the services panel or the command
1099 kes Remove some inappropriate Bacula FSFE copyrights.
1100 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1101 kes Fix regress config non-portable test as pointed out by
1102 Florian Heigl <florian.heigl@gmail.com>
1103 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1104 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1106 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1107 Reported by Frank Sweetser.
1111 kes Fix client-only build.
1112 kes Integrate client-only fixes for bsys (initgroups) and conio from
1113 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1114 kes Make arguments to get_scratch_volume() in same order as other
1116 kes Rework the prune_volumes() subroutine so that after purging and
1117 no volume found in desired pool, it will check for a scratch
1118 volume. This prevents recycling the whole scratch pool.
1119 kes Add code to status storage to print boffset_t (largefile support).
1121 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1122 kes You now need a --with-qwt=<dir> to be able to build bat.
1123 kes Update src/win32/cats/bacula_cats.def to include the new
1124 db_get_query_dbids() call on Win32.
1126 kes Correct a problem when selecting a scratch volume and moving
1127 it to another pool that lost some columns.
1128 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1129 kes Enhance Autochanger error messages to include Volume and device name.
1130 kes Rework prune_volumes() code to take account of InChanger flag,
1131 and to handle recycling volumes going to the Scratch pool and
1132 current pool because the RecyclePool directive.
1133 kes Implement a better and more efficient db_get_query_dbids() to
1134 handle creating and passing back a list of DBIds.
1138 kes Start work on new more efficient DBId subroutine. First use
1139 will be for recycling volume to Scratch inchanger.
1140 kes Increase number of JobIds in pruning from 1000 to 10000.
1141 This to be replaced by above routine.
1142 kes Begin implementation of building Qt4 on Win32.
1143 kes Correct typo in fix I added for bad TLS shutdown.
1144 kes Pull 2.0.3 patches into patches directory.
1145 kes Update Release notes. Include qt-console in line count.
1146 kes Update Projects file.
1148 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1149 bug in migration code where a job that spanned two volumes
1152 kes Implement new BST_DESPOOLING blocked state. Change from locking
1153 during despooling in SD to blocking. This means that other threads
1154 can work with the device structure, in particular the reservations
1155 system while despooling.
1157 kes Fix return in reservation message queue that missed clearing
1158 the jcr lock (implemented 26Jun07 below).
1159 kes Rename a number of dev methods to make locking function names
1161 kes Document locking in lock.c. Move lock structures to new file
1164 kes Move reservations message lock to lock jcr only this
1166 kes Move main SD locking code into lock.c (new file).
1167 kes Update Win32 build to include lock.c
1171 kes Dirk committed the qwt library code for drawing graphs in bat.
1172 kes Tweak install of qwt so that it is integrated with ./configure.
1174 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1175 out by Eric (my typo).
1176 ebl Fix configure.in to get batch mode enable
1177 kes Return correct string from authenticate.cpp in bat when connecting
1179 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1180 spurious line drops when using TLS.
1181 kes Do not file reparse points when restoring a file that already
1184 kes Implement Windows reparse points -- similar to directories, but
1185 we do not descend into it. This is a first cut. They seem to
1186 be backed up, but restore is not yet tested.
1187 kes Remove restore_blocking in tls code when shutting a socket to leave
1188 it in blocking mode. Hopefully this will fix the encryption bug
1189 reported by Frank Sweetser.
1190 kes When opening a file for backup, tell the OS that we are going to
1191 read it sequentially -- optimization.
1192 kes Change variable names in authenticate_director() to not conflict
1193 with member names in bat. Caused great confusion with compiler,
1196 kes Queue openssl error messages in case of comm problem.
1197 kes Do shutdown() call if socket terminated.
1198 kes Remove some duplicated code in tls.c
1199 kes Move more of the bsock member variables into private and access
1201 kes Add Frank Sweetser's tls-test to the regression suite.
1203 kes Add Swedish sv.po file
1205 kes Don't print clock skew message in FD if less than 3 seconds diff.
1206 kes Add a bit of VSS info to status client.
1207 kes Implement a first cut of Vista VSS, using Win2003 code.
1209 Release: 2.1.20 beta
1211 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1212 loaded tape but uses first drive).
1213 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1214 This was indeed a Win32 issue.
1216 kes Simplify search of autochanger for in-use Volume.
1217 kes Fix exit condition of check for in-use volume. kes Remove
1218 inappropriate my_postgresql_free_result() in db_close()
1220 kes Fix bad return in FD when encryption signature not found.
1221 Probably caused a crash.
1222 kes Inhibit missing encryption signature error messages for
1223 file types where no signature computed.
1224 kes Correct inverted check on autochanger in reservation system.
1225 kes Tweak debug code in autochanger reservation.
1227 kes Add some additional locking in the cats directory in subroutines
1228 that modify packet variables called from batch insert.
1229 kes Rework how dcrs are allocated. new_dcr() can now be called
1230 with an existing pointer, and it will simply clean it up.
1231 This allows the reservation system to test various different
1232 devices, and will permit easy device changes.
1233 kes A bunch of changes all over to handle new new_dcr() calling
1235 kes Work more on the Volume management in the SD. Remember Volumes
1236 for tape drives and for autochangers (even virtual disk changers).
1237 kes When looking at the Volume list to reserve a drive, handle
1238 autochanger names correctly by interating through the changer
1239 devices. Also call the Director to see if a Volume is suitable
1240 for the current job.
1241 kes Fix some bugs in bscan. Make sure all media records are written.
1242 Make sure that valid JobMedia records are written for disk files.
1243 Previously they were completely wrong.
1244 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1245 that the URLs don't change and so that the developers will all
1246 work off the same copy. Rebuild from scrach.
1247 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1249 Release: 2.1.18 beta
1251 kes Fix seg fault in FD from incorrect digest size.
1252 kes Fix argument to non-OpenSSL crypto.c subroutine.
1254 Release: 2.1.16 beta
1256 kes Remove a few malloc()s from the encryption code.
1257 kes Use the class calls to bsock in filed/backup.c and restore.c in
1258 place of the old bnet_xxx code.
1259 kes Implement code that does an on the fly calculation of the
1260 signing digest during restore of encrypted files. It makes
1261 a best guess at the algorithm, and if it is not correct, will
1262 then revert to the old code which reads the file after it is
1264 kes Implement at least one missing crypto stream in stream_to_ascii()
1265 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1266 #877 where a reload with bad syntax causes Dir to exit.
1268 Cut: 2.1.14 beta (not released)
1270 kes Do not free a volume on a tape drive until another volume is
1271 mounted and read, or the autochanger unloads the volume.
1272 This should help the SD re-use volumes that are already mounted,
1273 and should fix bug #886.
1274 kes Apply patch from user brettedgar that allows gnome2-console include
1275 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1276 kes Apply patch from Lucien Weller that fixes day of week calculation
1277 because of DST flag problem. Fixes bug #887.
1279 kes Move find_next_appendable_volume() to after acquiring a valid device
1280 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1282 kes Unable to reproduce bug 872. However added additional testing for
1284 kes Bug #874 resolved by documenting SQLite limitations.
1285 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1286 kes Bug #881 resolved by removing typo in mtx-changer script.
1287 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1288 approval. Added a link to the wiki on the web page, and implemented
1289 a backup from http://paramount.ind.wpi.edu
1291 kes Fix update allfrompool to pass pool name.
1293 kes Convert to pure GPL v2 license.
1294 kes Fix sscanf problems reported by Peter Buschman that caused
1295 a bus error on Solaris.
1296 kes Rework (simplify) the select prompt in bat.
1297 kes Move get_jobid_from_tid() into lib and create a
1299 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1300 should definitely fix the problem of lost error messages in the
1302 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1303 kes Eliminate tcpd.h from the project. Enclose the #include from the
1304 library with extern C ...
1305 kes Add print of signal name when a signal is trapped.
1307 Release: 2.1.12 beta
1309 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1311 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1312 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1313 makes SQLit3 run 30 times faster, though a bit less safe.
1314 kes Implement --with-batch-insert in configure and detection of thread
1315 safe libraries. It is on by default, but turned off if no thread
1316 safe library (e.g. SQLite 2) is available.
1318 kes Fix Bacula PostgreSQL buffer overruns.
1319 kes Do better checking for NULL results returned from PostgreSQL;
1320 implement retry for failed queries; clear results buffer after
1321 failed query. Hopefully this will correct the PostgreSQL failures.
1323 kes Implement algorithm to handle only one appendable volume with
1324 Prefer Mounted Volumes = no.
1325 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1326 returned from a query.
1327 kes Make volume lock recursive.
1328 kes Implement an additional volume reservation algorithm that
1329 starts by considering all reserved volumes then uses the
1330 old brute force algorithm of searching the resources to
1331 find a suitable device.
1332 kes Add new reservations debug code and refine the old code.
1333 kes Update the win32/dll/bacula.defs file.
1335 kes Tweak reservations algorithm to permit a few more cases, i.e.
1336 volume reserved, but on different drive, ...
1337 kes Enhance SD status to include Pool and Media Type for drive in a
1338 more readable format (a bit longer).
1339 kes Fix PostgreSQL double free.
1341 kes Minor refactoring of restore decryption code.
1342 kes Add code to smartall.c to detect double free of a buffer.
1344 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1345 so that bsmtp will create a correct email address (mailbox only).
1346 kes Modify 'memory' command so that the buffers are listed as 'In use'
1347 to avoid confusion with Orphaned buffers.
1348 kes I reworked the OpenSSL include/lib flags to be handled in
1349 the standard Bacula way, which should fix bug #863 concerning
1350 non-standard OpenSSL libraries.
1352 kes Implement Help Browser window for bat.
1353 kes Fix reload bug that reset StorageId to zero.
1355 kes Fix TLS #ifdefing when TLS turned off.
1356 kes Ensure that when labelling a tape with Slot=0 that InChanger
1358 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1360 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1361 add DISTINCT (required by PostgreSQL).
1362 kes Implement BSOCK authenticate_director() method. Eventually will
1363 authenicate all daemons.
1364 kes Move several more functions into the BSOCK class.
1366 kes Add code to tell the OS that we no longer need a cached
1367 file that we were reading. In findlib/bfile.c. Also,
1368 only cache files that we are reading. Thanks to
1369 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1370 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1371 kes Implement script to automatically generate cats and dll .def
1372 files for Win32 dll.
1373 kes Update README.mingw32 to include new .def file generation.
1374 kes Correct typo in UTF-8 error message as reported by:
1375 jhernandez <julianhernandez@gmail.com>
1376 kes Add additional sm_check() code on debug level 1.
1377 kes Set default debug level to 1.
1378 kes Trap SIGABRT in attempt to get traceback.
1380 kes Reduce bat connect timeout from 30 to 15 seconds.
1381 kes More restructuring and implementing BSOCK class in place of
1383 kes Remove a few unnecessary malloc() tests in crypto code.
1384 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1385 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1386 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1388 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1390 kes Fix Verify InitCatalog. The attributes were not pointing to the
1391 correct saved location.
1392 kes Implement message callback so that GUI is sure to get all
1393 daemon messages. Currently displayed in a dialog in bat.
1394 kes Ignore SIGUSR2 (Bacula timer) in bat.
1395 kes Apply regress patch from bug #859 to allow regress to work
1396 with Solaris compiler.
1398 kes Begin adding TLS support to bat.
1399 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1400 clean up lex.c and make it more readable.
1402 kes Move more bnet functions into the BSOCK class.
1403 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1404 kes Complete change of berrno strerror() method to bstrerror()
1406 Release: 2.1.10 beta
1408 kes Cleanup incorrect email addresses in bsmtp.
1409 kes Make bat display initial messages rather than discard them.
1411 kes First cut of adding .mod to the run command.
1412 kes Implement auto display of messages in bat.
1413 kes Enhanced preferences to allow all Bacula output to be
1416 kes Try to make bsmtp date routines more generic.
1417 kes Fixed bug #856 autochanger documentation.
1418 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1419 kes Add new cats entry point so Win32 builds.
1421 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1423 kes Do better checking for the MySQL 64 bit libraries looking for both
1424 .a and .so libraries.
1425 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1426 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1427 kes Require the thread safe version of MySQL during configure. Thanks
1428 to Andre Noll for pointing this out.
1429 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1430 continuing in migration code.
1431 kes Apply implementation of tray-monitor font derived from gnome-console
1432 submitted by Andreas Piesk <a.piesk@gmx.net>
1434 kes Eliminate important memory loss in SQLite
1435 kes Fixed the batch insert MySQL thread specific data that was not
1436 being freed. See cats/mysql.c:db_thread_cleanup().
1437 kes Fix restore before command.
1438 kes Convert old hdr.name to name() in a few places.
1439 kes Implement update jobid command.
1440 kes Return all time_t dates in db_get_job_record()
1441 kes Stop watchdog in SD earlier.
1442 kes Put Pool just after Storage in please mount message.
1443 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1446 kes Update the po files.
1447 kes Fix Verify InitCatalog by making it cache attributes.
1449 kes Change name bacula-bat to bat for man 1 page to correspond to
1451 kes Check for client and store NULL pointers in status command. This
1453 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1454 kes Fix sign extended editing of %p.
1455 kes Clean out a little old #ifdefing in cats/mysql.c
1457 kes If time diff between DIR and FD is more than 600 seconds convert
1458 INFO message to WARNING.
1459 kes Implement heap size display in status for all daemons.
1460 kes Attempt to fix MySQL db open memory loss (not successfull).
1461 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1462 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1463 Query. This looks like a MySQL but but by doing extra releases,
1464 the memory goes away. This should fix bug #847.
1466 kes When backup fails, cancel SD before waiting for sd termination.
1467 kes If SD is waiting for FD to connect during cancel, wake up the
1469 kes Fix fsf code so that errno is correctly reported.
1470 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1472 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1473 so that Bacula doesn't later stumble into a seg fault.
1474 kes Use the term Restore Client in the restore Job report.
1475 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1476 the original job's FileSetId.
1477 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1478 spooling in migration jobs. Not yet tested.
1479 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1480 reading conf file from a pipe. However, do it with open_bpipe()
1481 rather than popen. Not yet tested.
1483 kes Fix an ugly bug where the VolCatBytes were getting updated
1485 kes Implement bconsole memory command that prints current memory
1486 usage, plus smartalloc dump.
1487 kes Clarify some error messages in backup, admin, and migrate.
1488 kes Shrink label dialog to smaller size.
1489 kes Invert Cancel OK buttons on restore to be OK Cancel.
1490 kes More strerror() to bstrerror() conversions.
1492 kes Start implementing bstrerror() in place of strerror().
1493 kes Stripping path -- seems to work.
1495 kes Prevent door and port files from being restored (mostly
1497 kes Free an unreleased buffer in compat code.
1498 kes Change console Job name from *Console* to -Console- to eliminate
1499 Win32 filename problems. Put Win32 path separator when creating
1500 Console file. This fixes bug #846.
1501 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1503 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1505 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1506 to force Win32 error message.
1508 kes First cut strip path. The data should be passed to the FD,
1509 but nothing is done with it yet.
1510 kes Enhance the digest and signature routines in the crypto
1511 library to accept a JCR and to use it to print error messages
1512 so that they will go in the Job report rather than the daemon's
1514 kes Simplify some of the verify signature code.
1515 kes Simplify a few of the alternative returns in the signature
1518 ebl Use only POSIX regex instead of GNU regex in breg.c for
1519 File relocation. It fix broken freebsd compilation.
1520 kes Convert all other Dir files to use new ua class message
1522 kes Tentative fix for missing digest signature in bug 807.
1523 kes Correct handle problem in new win32_ftruncate routine.
1524 kes Convert ua_purge.c and ua_update.c to use new ua class
1525 message routines for bat.
1527 kes Correct incorrect installation of LICENSE in Win32 installer.
1528 kes Display LICENSE at the beginning of the Win32 install.
1529 kes Attempt to correct the need for the png files to be installed
1531 kes Reapply my bat.conf install script in qt-console. I think I
1532 editted bat.pro instead of bat.pro.in and it was lost.
1533 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1534 the /var/lock/subsys for subsysdir. Also corrects typos in the
1537 kes First cut update job.
1538 kes Correct configure to include qmake of src/qt-console directory.
1540 kes Make restore job yes/mod/no print in one command so GUI works.
1541 kes First cut implementing backup and restore client.
1542 kes Correct editing in Verify output that caused a seg fault.
1544 kes Insure that bat.conf is not overwritten during installation.
1545 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1546 while I was implementing migration in March 2006 !
1548 ebl Cleanup file relocation, using char *RegexWhere instead of
1549 char *where + bool where_use_regexp
1550 kes Update some manpages and add bat manpage.
1551 kes Make a first cut at converting bacula.spec.in for bwx-console
1553 kes Apply patch from John Goerzen to add hostname as fourth argument
1554 to make_catalog_backup script.
1555 kes Fix typos I introduced into bsmtp.c
1556 kes Make pm_strxxx() routines handle input of NULL pointer. This
1557 is to protect from NULL pointers returned from SQL databases.
1558 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1559 kes Add more debug to FIFO code -- fix fifo regression test.
1561 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1562 kes Add thread timer to bnet_connect() to break from OS if wait time
1565 kes Update Win32 build to include new files, new symbols, and
1567 kes Implement socket level heartbeat (tcp_keepidle)
1568 ebl Commit File relocation patch
1569 kes Make bat have 'make install' target.
1570 kes Warn during install if old gnome-console binary found.
1571 kes Warn during install if old wx-console binary found.
1572 kes Add -8 option to bsmtp command line to add content type utf-8.
1573 Fixes bug #809. (Character coding problem in bsmtp).
1574 kes If < is found in target (from, to, cc) then do not enclose the
1575 target in < > in bsmtp. Fixes bug #772 (malformed address).
1576 kes When printing certain items in dbcheck, stop after 300000.
1577 Fixes bug #822. (dbcheck loops).
1578 kes Incorrect status in Dir after waiting for mount with poll set.
1581 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1583 kes Print waiting to reserve a device every 5 mins.
1585 kes Don't call close_part in label.c if tape and relabel.
1586 kes Don't free volume if busy in close() -- should help with
1588 ebl Fix #824 RunScript bug (After script could be execute twice)
1589 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1590 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1591 Add a regression script to test RunScript
1593 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1596 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1597 deprecated. No additional bugs will be fixed, and they will be dropped
1598 in a future release (probably 2.4.0).
1599 kes Change name of wx-console to bwx-console to make it more Bacula
1601 kes Change the name of gnome-console to bgnome-console to make it
1604 kes Some time in March, a Feature Request with patch from Jorj Bauer
1605 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1607 The ability for the director to validate a Client (FD) CN against
1608 an arbitrary set of patterns rather than the hostname, with
1609 A new 'TLS Allowed CN' set of directives which are implemented
1610 in the Client resource. Then pattern matching is used in place
1611 of hostname matching against the Certificate's CN. As an example, we
1612 have certificates which (a) use a local CA, and (b) have a CN of the
1614 kes Add new/changed entry points to Win32 build
1615 kes Create unaccepted-projects for projects that are not accepted.
1616 kes Simplify locking in the reservations system.
1617 kes Add more debug code in reservations.
1618 kes Make sure error condition on reserving a volume is handled correctly.
1619 kes Correct handling of volume_in_use.
1620 kes Correct handling of initializing a device.
1621 kes Move handling of broadcasting releasing a device into release_device().
1622 kes Correct attaching dcr to dev so that it is only done if device
1623 is properly initiated.
1625 kes Locking debug level tweaks in SD.
1626 kes Tweak new Volume code.
1628 kes Add exec external-command [wait-seconds] to bconsole. This
1629 executes the external-command. Note! normally external-command
1630 should be enclosed in double quotes.
1631 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1632 it should normally be off in a production system.
1634 kes Implement die command for SD so that we can force it to dump.
1635 kes Implement SD lock debug code.
1636 kes Implement new algorithm for keeping Volume list in SD. It
1637 is now owned by the device.
1639 kes Implement new code for freeing in use volumes that should
1640 resolve if not all, some of the problems of multiple drive
1641 tape conflicts described in bug 801.
1643 kes Fix gui/bacula-web/images files in svn.
1644 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1646 ebl Fix a bug in batch mode (in string escape)
1647 kes Correct migration prune SQL typo that crept in in a
1648 recent 2.1.x change.
1650 kes Move bnet_despool() into class in bsock.c
1651 kes Modify job report to include director name and Build OS.
1652 kes Move drop root privilege and check_catalog() before fork.
1653 kes Add update database scripts (version 9 to 10) to updatedb directory.
1655 ebl Check size and age of each file after its backup to see if
1656 it has changed during backup, if 'checkfilechanges' is set.
1657 The FD will do an extra check (stat(2)) after
1658 each file backup. mtime, ctime and size are compared with
1659 'before backup' information. If time or size mismatch, an
1660 error message will be generated. You must upgrade FD to use it.
1662 kes Make database name and user configurable
1663 --with-db-name=xxx --with-db-user=xxx
1664 kes Add back database type to message.c for debugging.
1666 kes Implement dir_sql() which issues an SQL query.
1667 kes Modify bat medialist to use dir_sql() and do some minor C++
1668 formatting as well as eliminating a number of pointers, simplifing
1671 kes Fix some of the mtx-changer grep commands for tape label readers.
1672 kes Convert a number of bsendmsg into the appropriate send/warning/error
1673 message class calls.
1674 kes Suppress the using database message in the .sql command.
1675 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1677 kes Add context menu for floating a window.
1678 kes Some minor cleanup and name changes in qt-console
1679 kes Add doing mt setblk 0 in Win32 mtx-changer.
1680 kes Apply Martin's bug fix to move definition of ENODATA for
1682 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1683 sqlite2 and sqlite3.
1685 kes More pruning cleanup.
1686 kes Turn on wait_for_drive by default in mtx-changer.
1687 kes Turn on Batch insert code by default as it now passes regression.
1688 kes Add ./configure --enable-bat to enable building of Bat.
1689 No install yet though.
1691 kes Implement a new .sql command for bat.
1692 kes Implement code to turn off pruning in obtaining the next volume.
1693 Pruning is turned off for the status dir command, but turned on
1694 for SD requests and for the list nextvolume command.
1696 kes Correct Qmsg() that was not updated correctly when committing a
1697 previous change (probably the recent TLS patch).
1699 kes Write new subroutine is_volume_purged() that explicitly checks
1700 if the Volume is purged, and if so marks it as such. This should
1701 resolve problems reported about needing to mount twice to recycle
1703 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1704 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1705 amount of duplicated code.
1706 kes Do volume pruning only for the Media Type desired (reduces pruning time
1707 if multiple Media Types are in the same pool).
1708 kes Implement more detailed info in the Job report for the Bacula version
1710 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1712 ebl Add bbatch tool to bench database and insert mode.
1713 Fix sql quote stuff in batch mode
1714 Fix sql stuff for mysql
1716 kes Correct problems with am/pm scheduling. Fixes bug #808.
1717 kes Implement new prunning code that prunes up to 1000 jobs at
1718 the same time. The same technique can be applied to a number
1719 of other prune/purge subroutines.
1720 kes Add an insanity check when starting a new tape job to ensure
1721 that the tape position has not been changed. If so fail the
1723 kes Fix Win32 build for dlls to add the folllowing:
1724 src/lib/bsock.c -- new file with new entry points
1725 src/lib/dlist.c -- new entry points
1726 src/cats/sql_create.c -- new entry point
1727 src/cats/sql_cmds.c -- new DATA item exported
1729 ebl batch mode cleanup bscan-test is ok now.
1730 kes Implement SD code to check length of disk volume before appending.
1732 kes Correct return status on db_batch... routines.
1733 kes Add call to db_write_batch_file_records() to migration code.
1734 ebl Fix AfterJob timing
1735 kes Move the checking of the database in initializion of the Director
1736 to after we drop privileges. This avoids the need for both root
1737 and bacula access to the DB.
1738 kes Correct a misplaced variable definition in src/filed/backup.c
1739 kes Correct how the new batch insert db_create_attributes_record()
1740 uses the arguments. Caused a seg fault in bscan.
1741 kes Implement lock() and unlock() methods in DEVICE class.
1742 Implement block() and set_block(xx) methods in DEVICE class.
1743 kes Modify bnet_connect() so that it uses time() to check for the
1744 wait time expiring (on some OSes, some system calls may not
1745 return immediately).
1746 kes Modify Verify to obtain the previous JobId when it is actually
1747 running rather than at schedule time (as it was in 1.38.x).
1748 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1750 kes When checking pid in pid file, continue running if the pid is
1751 the same as ours. This occurs on IRIX after a system crash.
1754 kes Extend new GUI API.
1755 kes Make the ua structure a class, and implement send_msg(),
1756 error_msg(), warning_msg(), and info_msg().
1758 kes Apply fix from for building wx-console on the Mac from
1760 kes Implement new select mechanism for GUI programs.
1761 kes Reorganize initialization of stackedWidgets in bat.
1763 kes Add updated nagios plugin supplied by Christian Masopust.
1765 kes More bat implementation.
1766 kes File migrate bug with Pool Occupancy using mediaid instead
1767 of jobids. Fixes bug #795.
1768 kes Fix orphaned buffers in filed backup and verify due to
1769 crypto buffers not freed during errors. Fixes bug #789.
1770 kes Extend new GUI api code to tree commands.
1771 kes Ensure that tree and dot commands check console ACLs.
1772 kes Permit marking directory with trailing slash.
1773 kes Allow 20 console connections (instead of only 10).
1775 kes Add smartctl call to bacula-sd.conf as an example of getting
1778 kes Modify jobq.c to let simultaneous restore jobs run. This may
1779 cause them to fail if they cannot get a drive.
1780 kes Add Client Connect Wait to Storage daemon to permit users to
1781 modify the time the SD waits for a FD connection.
1783 kes Correct virtual changer check which was backwards. This caused
1784 volumes to be unloaded into slots already occupied.
1786 kes Apply Command ACL filter to JobId list in restore command.
1787 kes Correct typeo in var.c patch.
1789 kes Don't let Bacula prune File or Job records for the current Job.
1790 kes Fix variable substitution pad + inc bug reported (with patch)
1793 kes Correct SQLite log table index as reported by Luca Berra.
1795 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1797 kes Begin implementing new comm signals for API.
1798 kes Fix a few places in lib/message.c where the open fd may
1800 kes Continue implementing lib/bsock.c (real class). Make jcr,
1801 who, host, and port private. There are new methods to access
1802 them for non-class use. This required touching a number of files.
1804 kes Add LANG=C to autoconf/randpass so it works with languages other
1805 than English. Fixes bug #788.
1807 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1809 You will not be able to generate Include/Exclude list any more.
1810 It will be fixed soon.
1811 If you want to use this, you can apply
1812 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1814 kes Restore of sockets created false error messages because Bacula
1815 no longer restores sockets, but the code was still trying to
1816 set the attributes on a non-existent file. Reported by a user.
1817 ebl finish RecyclePool feature
1818 Media will takes Pool.RecyclePool
1819 when moving from Scratch to a Pool or when user will do
1820 update volume=xxx frompool
1821 To use it, add RecyclePool = aPool to your Pool resource
1824 RecyclePool = Scratch
1828 kes Expand new BSOCK class adding signal() and new BNET signals.
1829 kes Begin enhancing the dot commands adding a new API function
1830 that returns more information and will make it easier
1831 to interface to the Director from a program.
1833 kes Make DEVICE fd private. Its new name is m_fd, and can be
1834 obtained with dev->fd() outside the class. This is the
1835 first of many DEVICE members to be made private.
1836 kes Implement Michael Renner's idea on having a virtual disk
1837 changer. I made some minor modifications (e.g. I did not
1838 implement the Virtual Changer directive, but simply set
1839 the Changer Command to an empty string.
1841 kes Implement a BSOCK send() method that writes the whole record
1842 in a single write() request rather than in two.
1843 ebl add update volume=xxx recyclepool=yyyy
1844 volume takes recyclepool from pool when using update volume=xxx from pool
1846 kes Fix encryption deblocking bug, which caused some restored files
1847 to be truncated. This fixes bug #763.
1848 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1849 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1851 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1852 ebl Use btime_t instead of uint64_t in media patch.
1854 kes Optimize the use of the database a bit in the Status dir command.
1855 Only open it when needed, ensure that if any previous database
1856 was opened, it is closed.
1858 kes Correct VolCatBytes bug from media patch.
1859 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1860 in the case of orphaned records.
1861 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1862 and File records in 300K chunks to be more efficient. This
1863 idea came from Juan Luis Frances (if I remember right).
1864 kes Apply Eric's scratch patch that moves a purged Volume to
1865 the RecyclePool. Question: how is RecyclePool set? what
1866 happens to the ScratchPool?
1867 kes Apply Eric's media patch that collects read/write media
1868 times as well as byte counts. This patch requires a
1869 simultaneous upgrade of the DIR and SD. Note, there
1870 should be some way to turn off timing. I'm not sure
1871 times are in Bacula units.
1872 kes Apply Eric's batch-insert patch.
1874 kes Update projects list.
1876 kes Implement Include/Exclude file lists in FD as dlists using
1877 the new dlistString class. This permits efficiently having
1878 large include/exclude lists and completes project Item 25.
1879 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1880 console is authorized to cancel the job. This fixes bug
1882 kes Modify SD so that the VolCatJobs medium record is updated
1883 at the beginning of a Job rather than the end. This
1884 fixes bug #775 where exceeding MaxVolJobs caused jobs
1886 kes Added a mutex around getting and setting Volume information
1887 so that multiple simultaneous jobs will single thread.
1889 Switch to using Subversion
1890 kes Remove src/pygtk-console/ from configure
1892 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1893 plus the entrypoints.
1894 kes Apply patch supplied that corrects debug print
1895 in canceling jobs for max run time. Supplied as
1896 part of bug #621, which was previously fixed.
1898 kes Test on job_canceled() and sd_msg_thread_done inside
1899 loop starting the message thread to avoid a race condition.
1901 kes Remove rl_catch_signal from console.c as it conflicted
1902 with the header definition. Fixes bug #765.
1903 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1905 kes Clarify some stored/acquire messages to indicate if the
1906 problem is with read or append.
1908 kes Fix memory leak with storage ids in cats/sql_get.c
1909 kes Terminate watchdog earlier to avoid reference to released
1910 memory -- reported by Jason Austin.
1911 kes Move closing the database from jobq.c to the director daemon
1912 termination routine. This fixes memory leaks for shadow jobs
1913 (i.e. migration jobs).
1914 kes Free up the unique jobid chain items in migrate.c. This fixes
1915 a memory leak problem.
1916 kes Convert some ugly looking for statements to use foreach_alist
1917 in findlib/find.c. This will facilitate converting the structures
1918 to use dlist (for large include/exclude lists).
1919 kes Fix a bug in the btree.c and btree.h routines, then rename them
1920 rblist and add them to be built in src/lib. Include some new
1921 methods written by Rudolf Cejka that make the code more readable
1922 (hides some of the ugly casting).
1923 kes Add set_next() and set_prev() methods which make the code much more
1924 readable. Also add a new dlistString class that facilitates storing
1925 strings in dlists. To be used in the large include/exclude lists.
1926 kes Make some trivial modifications to lib/tree.h that use rblist
1927 rather than dlist for storing the tree links. This was suggested
1928 by Rudolf Cejka. The result of this is that the restore tree now
1929 uses red-black binary trees rather than simple linked lists. This
1930 should give rather dramatic speed improvements for directories
1931 contining large numbers of directories/files (more than 10000).
1933 kes Fix maxruntime bug #621.
1935 ebl Implement the include JobID in spool file name project.
1936 kes Reorder projects file in order determined by Jan 2007 vote.
1937 kes Implement item #12 on project list -- quick release of FD by
1939 kes Fix open of SQLite3 db where user does not have write permission
1940 so that DIR does not crash. Fixes bug #761.
1942 kes Add back missing @ in Win32 Makefile.
1943 kes Change 'Device not configured to autolabel' from INFO
1945 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1946 which should restart an indefinite # of times.
1947 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1948 other DIR specifications.
1950 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1951 Fix path quoting in SQLite scripts.
1952 Fix problems with SHGetFolderPath.
1954 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1956 kes Fix Job restart on error bug that promotes an Inc to a Full
1957 backup. This should fix bug #755.
1958 kes Add qt-console and first cut of code.
1962 kes Fix Bacula->Documentation link on Win32 to point to index.html
1963 instead of bacula.html. Fixed bug #750.
1964 kes Return JobId in db_get_job_record() when JobId==0. This should
1966 kes Do not release source pointers when restarting a failed job.
1968 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1969 This *should* fix bug #747.
1970 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1973 kes Modify USTORE constructor to set an empty store_source string,
1974 and don't copy the store_source string in a cancel. Hopefully
1975 this will fix Arno's seg fault, bug #744.
1976 kes Add back code to disable conio in configure. Fixes bug #743.
1977 kes Correct the Options scanner in the FD to correctly handle
1978 SHA1 option, which was eating the next option. Reported by
1980 kes Add code to indicate when the SD is spooling, spool wait, and
1981 despooling as requested by Alan Brown.
1983 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob