1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
29 ebl Fix a bug when restoring with a wrong mediatype.
31 kes Eliminate ints from conf files and structures to avoid
32 word alignment problems
34 kes Fix bug reported by Scott Barninger where the bacula script
35 refers to scripts in the wrong directory. Needed to meet the
36 requirements of recent FHS location changes.
37 ebl Disable vtape for FreeBSD.
39 ebl Modify disk-changer to check if slot contains something before
42 ebl Fix vtape on win32 and debian.
43 ebl Fix autoselect patch (cause segfault).
45 ebl Fix autoselect option broken for a while. Fix #1089. Need some
46 work with StorageId to be able to use a particular drive in a
49 ebl Rename faketape to vtape.
50 ebl Update faketape driver.
52 ebl Modify faketape driver to avoid sparse file.
53 kes Add make clean of qt-source directory during ./configure
54 kes Store last block number written to tape in DEVICE and
55 use it for testing for correct last block on EOT.
57 Release Version 2.4.0:
61 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
64 kes Add create_postgresql_database.sql to Win32 installer. Should
65 fix problem reported by Juilio Monteiro.
66 kes Get correct slot when auto unloading a device. This fixes bug
69 kes Fix multiple media restore.
70 kes Make DEVICE Slot private and access it via a method.
71 Allows better control over when it is set and cleared.
72 kes Fix possible seg fault if SQL error.
74 kes Add Martin's fixes to argument scanning for the estimate
75 command. This fixes bug #1093.
76 kes Add debug code to SD.
77 kes Fix renaming a Volume, which used the wrong Volume name.
79 kes If operator has rewind tape, print warning, release tape and
80 try once more. If tape is positioned somewhere, something went
81 wrong, so mark the tape in error and try once more. Previously
82 this error was fatal, now it produces an error message.
83 kes Ensure correct volume name displayed during restore
84 kes Ensure that Volume is mounted for restore.
86 kes Fix a few more Coverity reported problems.
88 kes Apply Allan Black's status dir job count patch.
89 ebl Add information about IMPORT/EXPORT slots in mtx-script.
90 kes Enhance a couple of SD debug messages.
91 kes Tweak unload flag setting and ensure it is set during swap.
93 ebl Fix #1091 about bad output in estimate command.
95 kes Modify autochanger locking to attempt to avoid race
97 kes Make sure device not busy before doing label command.
98 kes Display open() errors except when polling. Previously too
99 many were suppressed. This should fix bug #1070.
100 kes Fix Win32 reparse points. Bacula will not recurse into any
101 reparse point directory, including mount points, unless the
102 directory is explicitly mentioned at the top level (same as
103 with Unix). A file that is linked to another file will be
104 backed up -- much as Unix does for hardlinked files.
105 This fixes bug #1041.
107 kes Remove double quotes from ChangeLog and ReleaseNotes
108 kes Remove StorageId test when pruning and recycling (Eric's changes).
109 kes Remove old form of locking when getting volumes -- causes deadlock.
110 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
111 the name unique and to eliminate compile time error.
112 kes Add accurate.o to Win32 FD Makefile
114 kes Fix cats dll build on Win32 after db_update_job_end_record
115 calling sequence change.
116 ebl Switch to tokyo dbm instead of htable in accurate code
117 ebl Include tokyo dbm to bacula source tree
119 kes Fix buffer overruns detected by Coverity.
121 kes Tweak joblog display.
123 kes Implement --without-qwt
124 kes Fix layout of restore tree dialog
125 kes Add configure bat QWT libraries, so that bat can be built
126 with or without the QWT libaries.
128 ebl Add dummy tape driver for regression tests.
129 kes Make sure we unload the right slot when swapping.
131 kes Add debug times, reduce size of two-pool-changer test
133 ebl Tweak autoconf scripts for faketape
135 kes Improve SD reserve debug code.
136 kes Testing an improvement to free up volumes no longer in use.
138 kes Rework SD acquire for read to handle autochanger Volume
140 kes Implement regression that explicitly tests swapping a Volume
141 from one drive to another.
142 kes Enhance disk-changer to detect most error conditions.
143 kes Fix SD code so that it properly swaps a Volume between drives.
144 This fixes bug #1083.
146 kes Apply libdbi patch from Joao Freitas for regress and for
147 Bacula trunk. Regress now works with libdbi. Nice.
148 kes Apply .nobackup patch from bug #1077 submitted by
150 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
151 name into jobs cloned via the run directive.
153 kes Prevent a Volume that is being swapped from being freed from
154 the volume list. This will most likely fix, at least partially,
156 kes Fix strippath so that it does not get a buffer overrun and crash FD.
157 This fixes bug #1078.
158 kes Remove 50 millisec wait in SD that broke debugger.
159 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
160 that a job may run, counted from when the job was scheduled.
161 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
162 a job may block waiting for a resource, counted from when the job starts
163 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
164 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
165 that implements multiple commands per line in the console when using
166 readline. Modify the default to use a semicolon as the command separator.
168 ebl Fix SQL query in migration code.
169 ebl Make accurate mode with hash disk pass regression tests
171 ebl Implement first cut of accurate backup with hash disk.
173 kes Force unload of volume when wrong volume mounted in SD.
175 kes Fix bat seg fault at termination.
176 kes Add Bacula generated version to bat about box.
179 kes Experiment with allowing multiple read jobs.
180 kes Move final volume swapping code to DCR method and
181 call it from acquire_for_read().
182 kes When wrong volume is mounted during read, unload_autochanger.
184 kes Integrate the libdbi changes from Joao Henrique Freitas
186 kes Stop searching for Volumes in SD askdir if DIR returns the
187 same volume name twice in a row.
188 kes Close bat console windows first to eliminate error message
191 kes Tweak the swap Volume from one drive to another code so that
192 it now seems to work.
193 kes Resolve several problems with recycling that broke the new
194 code (these problems are in 2.2.9 as well).
195 kes Remove the volume lock when calling the sysop code.
196 kes Don't mark a reserved volume with no writers as unused otherwise
199 kes Rework class structures for VOLRES, DCR, and DEVICE to make
200 the method names a bit more logical, and for more logically
201 handling the responsibilities.
203 kes Remove redundant code in terminating the scheduler that just
204 causes a seg fault in many cases.
205 kes Cleanup releasing a volume and make it a DCR method.
206 kes Improve algorithm for detecting pre-reserved volume and
209 kes Tweak volume swapping code so it works.
210 kes Correct name overloading in mount.c
211 kes Replace released flag in VOLRES with reserved and add access
212 methods for the VOLRES class.
213 kes Prevent volume from being released while being swapped.
214 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
216 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
218 kes Refactor parts of stored/mount.c
220 ebl Add sanity checks for VolWriteTime and VolReadTime
221 ebl Take care of bad clock changes while computing VolWriteTime
222 and VolReadTime. This should fix or limit #1066
223 kes Correct error string numbers in dird/catreq.c
224 kes Restructure reserving, acquiring, and mounting volumes. Calls to
225 autochanger are deferred for mount.c -- simplifes the code.
227 kes Do not prune any running job. It just fails the job.
228 kes Lock the volumes when changing dev->reserved_device and marking
229 the volume unused otherwise the device can get reserved by
230 another job before the volume is released, thus blocking it.
232 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
233 kes Fix bug #1063, reuse of freed ptr in list nextvol.
234 kes Release regex compile buffer in filed/job.c
235 kes Add proper type of const char in sql_create.c
236 kes Turn off debug in daemon termination routines
237 kes Move free_volume_list() before devices are freed in stored.c
238 kes Fix reference to uninitalized stack variables in bregex.c.
239 This should correct bug #1067.
241 kes Fix possible seg fault in SD when freeing a volume entry.
243 kes Implement unload_dev() before swap device.
244 ebl Add statistics prunning with option and menu
245 kes Separate unload_dev() from unload_other_device() in autochanger.c
247 kes Apply patch from bug #1069 that corrects spurious error messages
248 when ACLs enabled on SGI but no ACL exists.
249 ebl Fix small segfault in bacula-sd when debug level is 500
250 kes Modify run_program() and run_program_full_output() to use
251 call by reference for the results string. This corrects a long
252 standing problem where the address of the string may be changed
253 in the subroutine but not in the calling program.
255 kes Re-enable code to remember last volume mounted on a non-tape
257 kes Add patch supplied in bug #1068 that fixes a SD crash when using
258 a Virtual autochanger.
259 kes Generate correct JobMedia records during spooling/despooling when
260 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
261 <tih@hamartun.priv.no> for excellent analysis and testing.
263 kes Tweak hash algorithm for htable using Martin Simmons idea
264 for doing a circular shift.
265 kes Remember what volume is in VTLs (previously turned off for
267 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
268 pointed out some problems in creating JobMedia records during
269 spooling with concurrent jobs. Fix the problem by updating the
270 start file position before despooling and generate a jobmedia
271 record at the end of despooling.
273 kes Fix handling of JobMedia records during spooling and when a
274 Volume is changed without actually writing data to the Volume.
276 kes Rework certain SD locking based on gdb tracebacks of deadlocks
277 sent by Eric. This code now uses only the volume_lock() rather
278 than the reservations lock when at EOM and acquiring a new
280 kes Ensure only one exit point in several subroutines.
282 kes Implement bsock code to permit locking. Use the new code in Verify
283 in the FD to prevent the heartbeat thread from disrupting the Verify
284 data sent to the Dir.
285 kes Modify SD locking to eliminate locking the reservations system from
286 outside the system. Use the volume lock when getting media data
287 and reserving a new volume at end of media.
288 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
289 when SD starts are not locked into place.
291 kes Fix error compiling runscript code on 64 bit machines.
292 kes Tweak Win32 mount point code.
293 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
294 cleared giving bad file estimate).
295 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
298 kes Keep Schedule run lists in order as suggested by
301 kes Implement autostart scripts for Debian.
302 ebl Implement upgrade catalog scripts.
304 ebl Apply jobstat patch for long term statistics. Have to implement
305 purge stats command and upgrade scripts.
306 kes Fix mtx-changer.in for broken Debian mt program.
308 kes Fix large number of JobMedia records reported by Eric Bollengier.
310 kes Apply doc fix from bug #1062.
311 kes Resolve crash and improper restore wx-console Win32 restore
312 GUI. Fixes bug #1065.
313 kes Update Win32 wxWidgets to latest version.
314 kes Attempt to do correct handling of Win32 mount points. Should
316 kes Fix Win32 FD backup/restore memory leak due to improper termination
317 of BackupRead/Write. This fixes bug# 1038.
319 ebl Reduce memory usage for accurate backup, working only with ctime
320 and mtime. (not all Lstat field)
321 About 40MB for my linux system (400.000 files)
323 kes Add dcr->reserved_volume flag that allows us to release a volume
324 even if it is not vol->released. This allows maxvol2 to work when
325 Volumes expire and we are already writing to the device (i.e. a
326 volume is pulled out from under us by another job terminating after
327 we reserve the drive).
329 ebl Permit multiple command/console per runscript definition.
330 RunScript { command = /bin/true ; command = /bin/false ... }
331 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
332 (restart an application) just after the VSS snapshot on windows.
333 kes Don't zap dcr values during release_volume() as they might
334 have the next Volume to be mounted.
335 kes Fix AIX prototype.
337 kes Second cut of drive switching during backup.
340 kes Update Win32 version of wxWidgets to most recent version.
341 kes Tweak Copy job details.
342 kes Rework dir_find_next_appendable_volume to make a bit more effort
343 to find a suitable volume before giving up.
345 kes Make ask_sysop_to_create... to return if waken from wait.
346 This helps get out of blocked conditions.
347 kes Experimental implementation of switch_device in reservations.
348 kes Implement FD version to allow easier protocol changes.
349 kes Add Plugin Options string -- not yet passed to FD.
350 kes Implement PluginOptions ACL.
352 kes Attempt to correct problems with restores with autochangers and
353 use counts going negative
354 kes Rework SD status command and implement API for bat. Implements
355 header, runing waitreservation, devices, volumes, spooling,
356 and terminated status keywords.
357 .status storage=xxx <keyword>
358 kes Clarify TLS error message by adding double quotes around name.
359 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
360 kes Pass jcr to tls routines so debug messages can be handled better.
361 kes Rework jobq resource allocation code, and possibly fix a bug
362 that caused reference counts to get out of sync.
364 kes Rename fd/dir plugin to use Bacula standard underscore.
365 kes Plugin work -- bring dir up to fd level.
366 kes Start implementation of VTL code
367 kes Fix Win32 build after adding new cats subroutine.
369 kes First cut at Duplicate Job implementation.
371 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
372 kes Start PluginOptions string, and refactor a bit of ua_run.c
373 ebl Apply Allan patch that permit to reset recyclepool.
375 kes Test patch -- possible fix or improvement for bug #1053
376 kes Refactor FD and SD status commands to permit new API code in
377 SD, and to fix Win32 build.
378 kes Win32 build is now working.
380 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
381 some ideas in patch from Scott Bailey.
382 kes Begin implementation of duplicate Job control.
383 kes Fix some of Win32 build after recent additions.
384 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
385 which causes the FD to detect whether or not the OS has the
386 honor no dump bit (*BSD systems), and if so, to skip backing up
387 any file with this bit set. The feature is enabled by setting
388 'honor no dump flag = yes' in the Options section of a FileSet.
390 kes Correct po warning message with datarootdir
391 kes Implement more code in dird.c to put configuration parsing in
392 a class rather than use globals.
393 kes Restructure SD status command for implementation of bat API
396 kes Suppress incorrect 'Will not descend from x into y' messages.
397 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
398 daemon globals used by parser.
399 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
401 kes Fix free of plugin_list when none exists.
403 ebl Apply accurate project patch.
405 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
406 on non-mempool object)
407 kes First cut of converting FD .status to work with bat API.
409 .status client=XXX header
410 .status client=XXX running
411 .status client=XXX terminated
412 kes Implement first cut of Copy Job.
413 kes Implement Catalog in Pool resource. It overrides catalog specified
414 in the Client resource.
416 kes Apply patch (with some difficulties) from Joao Henrique Freitas
417 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
419 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
420 ftruncate() actually works. In the case of some (cheap) NAS devices,
421 it does not, and so recycling NAS Volumes does not work. The code
422 simply unlink()s the file, then recreates it. This fixes bug #1011.
424 kes First incomplete cut of big malloc blocks for htable.
425 kes Tweak plugin code.
427 kes Plugin debug code + tweak a couple bat dialog layouts
429 kes Fix creating first JobMedia record during Migration to include
430 proper index. This caused slow restores of migrated jobs.
431 kes Temp fix to plugin name file_index.
432 kes Bacula backed up and restored a MySQL database.
434 kes Implement plugin restore.
435 kes Implement parsing of db_driver to give db_type index.
437 kes First cut of plugin restore code.
438 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
439 and do not strip paths on symbolic links.
440 kes Set catalog backup database and user name from values specified on
441 the ./configure line.
442 ebl Fix #1031 about wrong pool source information in job report.
445 kes Remove a redundant jcr argument to find_files, match_files, and
447 kes Implement '.status dir header|scheduled|running|terminated' that
448 prints the requested status section. With the exception of the
449 header, the other reports have fields separated by tabs (\t).
451 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
452 a resource embedded run command to find a since time if no explicit
453 since time was supplied on the command line.
454 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
455 that updates the state file at job termination time in addition to
456 when the daemon terminates.
458 kes First version where a plugin did a backup.
459 bpipe-fd.so created a backup file, wrote a test
460 string to it, and Bacua could restore this fabricated file.
462 kes Implement DB Driver = string for the DBI driver.
463 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
464 kes First cut of code for loading Win32 plugin dlls. Implement
465 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
466 and implement a dlfcn.h file based on opengroup's definitions of
469 kes First cut plugin directives.
471 kes Apply patch from bug #1049 to prevent stripping the path on a
473 kes Attempt to fix bug #1047 where stripping a path corrupts the
474 heap. Waiting for feedback.
475 kes Correct the Mount message not to suggest labeling a new tape
476 when doing a restore. Submitted by email by John Stoffel.
477 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
478 FD by using casting. Reported in bug #1042.
480 kes A bit of crypto cleanup. More later.
482 Release Version 2.2.8
484 kes Apply patch from Martin to correct bug #1040, bscan sets existing
486 kes Fixed important spelling error in doc -- bug #1045.
488 ebl Fix bextract to be able to extract non-portable Win32 data to
490 kes Move initialization of read/write res lock earlier in the code.
491 This fixes the crash with a null conf file. This fixes bug
493 kes Redefine CURES in lib/parse_conf to be URES and move it all
494 into lib/parse_conf.c -- this responds to bug #1042, but does
495 not fix it. The fix is not to compile with FORTIFY_SOURCE.
496 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
497 the trunk SVN. I don't think this was reported as a bug.
499 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
501 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
503 kes Add DataDespooling and DataCommitting status (committing is
504 the last despooling).
505 kes Finish implementation of new reservations code noted below.
507 kes Fix bsnprintf for float point numbers. I broke recently when
508 parameterizing some variables. This fixes bug #1036.
509 kes Undo recent reservations changes ... will apply them later
510 when they work better.
512 ebl Fixes #1034 which cause mysql to hang the connection after 8h
513 ebl Change default statistics target of filename.name and path.path
514 fields for PostgreSQL. This speeds lookup by indexes. Thanks
516 kes A few more tweaks to new reservation code. Make sure to clear
517 vol released flag when retaking volume. When reading label and
518 label is bad mark volume unused. When recycling, mark volume
519 unused so it can be renamed.
521 kes Fix reserve_volume() so it doesn't release a volume in use
522 (i.e. a volume entry not marked released). This should be
523 the last part needed to fix bug #1018.
525 kes Move Heartbeat documentation from Job to Director resource.
526 This fixes bug #1033.
528 kes Fix existing switch drive SD code to call autochanger to release
529 any old volume. This must be done to keep the autochanger from
530 releasing subsequently newly reserved volumes in doing a close().
531 This should fix bug #1018.
532 kes Fail if attempting to get console input in batch mode. This
533 should help fail RunScript console commands that are incomplete.
534 kes First cut implementing switch_drive() in SD (not actually called).
536 kes Implement first cut running console commands in a RunScript.
538 ebl Fixes bug #1028 where 'Selection Type' option was not usable
540 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
543 Release Version 2.2.7
545 kes Add new free_tls() entry point so that Win32 builds.
546 kes Fix compile warning in src/lib/util.c
547 kes Fix entry point for edit_job_codes() so that Win32 builds.
548 kes Fix seg fault Frank Sweetser reports in regression testing
549 on his systems. The problem was that the original author of
550 bsnprintf.c did not take into account the side effects of
551 using ++x in the argument to a #define.
552 kes Make SD protocol backward compatible with version 2.2.x.
554 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
555 because Bacula no longer restores sockets.
556 ebl Always use ignorecase fileset option on win32 FD.
558 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
559 that implements double quoting include names in conf files,
560 and also allows piping input by having the first character
561 be a vertical bar (|).
562 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
563 that implement %f in RunScripts to pass the FileSet name.
564 kes Skip leading | when lex input comes from a pipe as suggested
565 by Michael Stapelberg <michael@stapelberg.de>.
567 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
568 Nerijus Baliunas <nerijus@users.sourceforge.net>
570 kes Implement Plugin Directory and plugin events.
572 kes Implement a security enhancement: TLS authentication but no
573 encryption. Enabled by setting 'TLS Authentication = yes'.
574 Note when this is on, TLS encryption is turned OFF!
576 kes This patch corrects a problem where the maximum concurrent storage
577 jobs counter gets out of sync during restore jobs causing jobs to
578 'wait on max Storage jobs'. This patch fixes bug #1009.
580 kes This patch fixes bcopy so that it produces correct Volumes.
582 kes This patch eliminates spurious output to the console during a VerifyVolume
583 job that contains encrypted data. It fixes bug #1024.
585 kes This patch prevents the 'status dir' command from trying to use a scratch
586 volume and possibly moving it from one pool to another. This patch fixes
589 kes Add new include to postgresql.c suggested by Marc Cousins so
590 that it compiles correctly with pgre version 8.3.
592 kes Fix --archivedir addition to configure. Replace it with
593 --with-archivedir in configure.in This fixes the regression
595 kes This patch fixes bug #1012 where the job is canceled because
596 of Max Run Time exceeded when the job has not yet started.
598 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
599 one 'part' to write. Instead of each part being stored on disk,
600 written to DVD, then deleted from disk, all parts are written to disk,
601 and only the last is written and deleted from disk.
602 kes This patch fixes the status command to include the formating string for
603 JS_AttrInsterting. It fixes bug #1021.
604 kes This patch should fix the Mac OS X build problem on the latest
605 Darwin, where sys/types.h was not included correctly (apparently
606 due to a change in the Mac headers). The solution was to explicitly
607 ensure that it is defined for the ./configure.
608 This patch also has a rebuild of configure that includes the Debian
609 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
610 kes This patch should ensure that queued messages to the console are
611 displayed as soon as possible. It should fix bug 1007, but has been
612 reported not to work.
614 kes This patch fixes the infinite loop when trying to increase the
615 maximum number of volumes in a Pool during the add command.
616 This patch fixes bug #1008.
618 Release Version 2.2.6
620 db Remove extra data on estimate command in joblist for bat.
622 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
623 really change anything, but is the beginning of doing it *right*.
624 To do it completely right the LastWritten date must be passed to
625 the SD, but it is not yet done.
626 kes Minor tweaks to some bat restore SQL.
627 kes This patch fixes bug #1003 where putting the message output from
628 a Verify job into the catalog results in a recursive loop. The problem
629 seems to show up only with postgresql (to be verified).
630 kes Correct %x to %p in postgresql debug statement.
632 kes Fix bug #942 where lots of emails where generated when the heartbeat
633 interval was low and Bacula wanted a different tape from the one in
636 ebl Add new SD despooling attributes and Dir inserting attributes
637 job status codes in the catalog (Status table).
639 ebl Use qmake-qt4 instead of qmake when available (debian system).
641 kes Add a security warning to src/cats/make_catalog_backup.in indicating
642 that passing the password via the command line (arg 3) is insecure.
643 This responds to bug #990 (it doesn't fix it).
645 kes Set default debug_level to zero. This corrects bugs #991 and #993.
646 kes Fix a crash in bat when it cannot connect to the Director for example
647 if the Director is not running.
648 kes Remove redundant INDEX (JobId) from File table in the trunk.
650 kes Make explicit exception to GPL in LICENSE to permit linking
651 the Win32 FD with Microsoft VSS code.
652 kes Apply the Solaris package patch from
653 Masopust, Christian <christian.masopust@siemens.com>
654 kes Apply the patch to optionally add a timestamp in the debug output
655 submitted by Mariusz Czulada <manieq@wp.eu>.
657 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
658 backend (sql_strerror). Fixes bug #989
660 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
661 It applied with no problems.
662 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
664 kes Redirect stderror to stdin on mt status command in mtx-changer.in
665 since the status is returned on stderr on Solaris.
666 kes Activate Close button on tray-monitor window. This fixes
668 kes Check for NULL item in parse_conf.c before calling it. In the
669 case of Device, there is no item and this caused a seg fault when
670 Device appears in the conf file.
671 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
672 avoids pulling in config.h multiple times in some new code.
674 kes Fix spurious warning message printed when creating a volume with
675 a LabelFormat. This fixes bug #976.
677 Release Version 2.2.5
679 kes Add JobId in place of Job name in all the Jmsg() output.
680 kes Correct the APP_DESC for the Win32 storage service (remove an e).
682 kes Make maxvol-test and new more strict maxvol2-test work.
683 kes Print JobId in all Jmsg() job output.
685 kes Add new SD despooling attributes and Dir inserting attributes
686 job status codes. This fixes bug 961.
687 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
689 kes Fix doc issue. This fixes bug #963.
690 kes Fix listing performance problems in bat. Pointed out by
692 kes Remove old debug code.
693 kes Fix bat code that tests for Win32. This should fix bug #968
694 kes Query 5 list wrong Vol after migration. This fixes bug #960
696 ebl Fix #969 where user can't change Replace option in restore menu.
698 kes Save jcr in thread specific data (tsd) for each thread.
699 kes Make Dmsg() print JobId as -%u.
700 kes Make Jmsg, Emsg, and others automatically pickup the jobid
701 for the thread if it exists.
702 kes Remove old reservation debug jid code.
703 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
704 ebl Add an option that permit to specify spool size in job
705 definition. (Applying patches/testing/spoolsize_per_job.patch).
706 You must upgrade SD and DIR at the same time.
707 dvl Add new configuration item --archivedir
708 dvl Adjust regression tests to use tmp not /tmp. This will allow
709 multiple concurrent runs of the regression tests.
711 kes Fix race condition that drops final block written to volume.
712 This happens in rare cases with multiple simultaneous jobs
713 when the Volume fills. This fixes bug #964. May be related
714 to bug #935 and possibly #903.
715 kes Eliminate more strerror() and replace with bstrerror().
716 kes Remove BSD getopt and replace with unrestricted IBM version.
717 kes Fix Win32 build for changed calling sequences.
718 kes More tweaks to the mount volume routines to get everything
719 right. Changed variable name from find to have_vol, which is
720 much easier to understand.
721 kes Enhance btimer debug code.
723 kes Fix FD->SD authorization failure, which was due to spurious
724 wakeups from a pthread_cond_timedwait(). Simply check the
725 predicate before continuing. This fixes bug #953.
726 kes Add const char where needed (more to do). Remove temp debug code.
728 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
729 kes Don't overwrite error message in check_tables_version.
731 kes Unlock batch insert tables with same calls used elsewhere.
732 kes Allow starting 59 jobs a second.
733 kes Make SD session key more random.
734 kes Add retry for SQLite opening db if it fails. Probably helps
736 kes Suppress extra error messages during batch insert failure.
738 kes Add jcr to timer packets so if killed message can be sent to job.
739 kes Add JobId to all Dmsg() output.
740 kes Put some FD auth code on dbglvl rather than fixed.
741 kes Return insert attributes error message in db msg buffer to avoid
742 false error messages. Helps fix bug #966.
743 kes Separate batch init error messages. Probably helps fix bug #966.
744 kes Make SD code that contructs attribute insert check string lengths
746 kes If Dir gets an error during inserting attributes, cancel SD.
747 This reduces unnecessary error messages.
749 kes Correct search boolean for getting Volume info
750 ebl Cleanup batch insert code. Probably fixes bug #965.
751 kes Back out one small change to the reservation system (reserving a volume).
752 kes Rework how a Volume is mounted. It is now much more intelligent and
753 will always attempt to use any mounted volume if possible and reduces
754 calls to the Director asking about volumes.
756 kes Turn off some code when batch insert not enabled.
757 kes Edit FD name in connect error messages.
758 kes Rework the reservation system to take into account that the Director
759 might give us a Volume that is different from the current one being
760 used, and to ensure that we don't exceed Maximum Volume Jobs.
761 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
762 fatal error with multiple jobs running'
763 kes Add more debug code in reservation system.
764 kes Implement maxvol-test to check bug #947.
766 kes Add code to handle tray monitor separated from Win32 FD.
767 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
769 kes Add missed return in fixing verify bug -- trunk only.
770 ebl Fix a command parser issue causing a director segfault.
771 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
773 kes Increase the max block size to 4MB fixes bug #957.
774 kes ERABT if user sets min block size > max block size. Fixes bug #956.
775 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
776 is not properly mounted (recognized) during a poll.
777 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
778 Job that has differences reports Verify OK.
779 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
781 ebl Add an option to operate on all pools with update vol parameters.
782 This complete the project 20. Patch from Nigel Stepp.
783 ebl Add history support to bconsole when using readline.
784 Using Ctrl-D to exit doesn't update .bconsole_history
785 kes Modify new volume algorithm to use max MediaId for generating next
786 volume number rather than the count of Volumes. This should essentially
787 eliminate the failure rate if some volumes were deleted. Bug #921.
788 kes Begin implemention of Optimize Job Scheduling.
789 kes Implement restore callback that Dirk and I agreed on for bat
790 restore. This fixes bug #928. Restore of backup of zero files fails.
791 kes Fix SQL Catalog logging which broke with new db_escape_string
794 Release Version 2.2.4
796 kes Fix bacula_cats.def for new db_escape_string().
797 kes Increase size of name string when FD making connection to SD.
798 May fix bug #953. FD->SD connection failure.
800 kes Add code to help Dan debug 2drive-incremental-2disk test.
801 kes Add code to try to fix bug #908.
802 kes Add waits to multiple exit detection code to try to force pid
803 file to always be deleted.
804 kes Restore good dev.tar.gz to rescue set appropriate binary property.
806 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
807 trying to switch drives by checking for blocking before unblocking.
809 kes Cancel storage daemon in all cases where FD reports error. This
810 should fix virtually all cases of bug #920.
811 kes Fix db_escape_string() for MySQL which did not compile.
813 kes Fix error message that was clobbered when Dir tells SD it does not
814 have write permission on Volume. This should fix a minor point
815 in bug #942, but not the main problem.
816 kes Add code to cancel job in SD if FD connection fails. This should
818 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
819 dvl Pass jcr and db into db_escape_string() to enable better escaping
821 kes Fix migration code to get correct Volume name with multiple volumes
822 by skipping |. Fixes bug #936.
823 kes Implement patch supplied by Landon to fix bug #944 where using
824 TLS with bconsole uses 99+% of the CPU.
825 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
827 kes Move patches into patches directory.
829 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
832 ebl Using 'm' in bconsole will show messages like before,
833 and not memory usage.
834 kes Fix bug #935, and probably also bug #903 where files were not
835 restored. MediaId was not properly set in JobMedia record after
838 kes Suppress chown and chmod error messages if the FD is not running
841 kes Apply Martin Simmons' patch that should turn off the new API usage
842 when batch insert is turned off allowing building on older
844 kes Add ./configure search in qwt-qt4 for qwt package
846 kes Bacula is now free of 3rd party GPL copyrighted code!
848 kes Add guid_to_name.c/h which replace idcache.
849 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
851 ebl Detect if new PosgreSQL batch insert API is present.
852 kes Correct incorrect mempool call causing Director crash. Occurs on
853 systems without va_copy().
854 sb Update spec files for 2.2.1 release
856 kes Fix memory pool call in ua_output.c. bug #934.
857 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
858 Add test program to fnmatch.c
860 kes Integrate patch to README.vc8 from
861 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
862 edit it to get it into Unix patch format.
863 kes Implement mkpath.c to replace old FSF makepath.c
865 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
867 Release Version 2.2.1
869 kes Update POTFILES.in
870 kes Cleanup a few underquoted AC_DEFUNs in configure
871 kes Apply patch from Martin Simmons that adds a test for va_copy to
874 kes Fix bug #921 by increasing the number of tries to create a new volume
876 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
877 can be called multiple times. Implement a version for machines
878 without va_copy() that gets a big buffer.
880 kes Integrate more portable zone offset code into bsmtp.c
881 Submitted by Attila Fülöp.
883 kes Fix bad SD->FD return status reported by
884 (James Harper) <james.harper@bendigoit.com.au>
885 ebl Fix a bug in read_close_session which return random status
886 thanks to James Harper
888 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
889 and directory names during restore of single file/directories.
890 kes Add sanity checks to .sql command when string is empty. Hopefully
891 that will resolve Dirks Director crash.
893 kes Apply patch submitted by Martin Simmons that corrects a seg fault
894 in the bsmtp chat subroutine when debug is >= 10.
896 kes Fix Director crash when running bat SQL queries.
897 kes Add David's notes on Item 8: Copy pools.
899 kes Rework projects file to be current and ready for a vote.
900 kes Enhance lex scanner error message.
902 kes Tweak LICENSE file to mention BSD code.
903 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
904 if specified on the ./configure.
905 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
906 This class is intended to allow us to open a second bsock to the
907 Director while in the restore subdialog.
909 kes Fix configure to create bat Makefile before creating dependencies.
910 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
911 kes Add a tooltip to the tray monitor.
912 dvl Set the Director's PID file before dropping privs. This fixes
915 kes Update AUTHORs file
916 kes Increase the default max concurrent jobs to 20 in FD and SD to
917 correspond with the default .conf files.
918 kes Rewrite the Win32 service routines. This eliminates the 3 copies
919 some different, of the same file created by RN when porting the
921 kes Rearrange some of the Win32 directories and the placement of the files
923 kes Set DEVELOPER flag in version.h
925 ========================================================================
926 Release Version 2.2.0
928 kes Apply a second doc patch from Marc.
929 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
930 improves the tips section that discusses how to setup multiple
933 kes Update bat README file.
934 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
935 corrects a typo in the Recycle status check in db_find_next_volume().
936 This will probably fix a number of annoying problems with multiple
938 kes Modify most of dird/msgchan.c to use bsock class calls rather than
939 bnet calls -- no functionality change.
941 kes Modify the Verify output to specify if files are missing on
942 the Volume(s) or disk. Fixes confusion in bug #916.
943 kes When more than one Volume is read in a migration job, the last
944 Volume bytes reported are from the last read volume rather than
945 the last written volume. Fixed. This fixes bug #910.
946 kes Fix display of Recycle flag after update volume=foo recycle=yes.
947 It previously printed New Recyle flag is: no. This fixes bug
950 kes Correct seg fault when switching tape drives during restore.
951 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
952 be used until after 2.2.0 release.
954 kes Remove fnmatch() in SD that permitted wild card specifications.
957 kes Fix %g in filename returned by SQL for browse tree reported by
959 kes Fix configure so that it puts config.out in the cwd rather than
961 kes Attempt to fix the locking problem reported by Eric in bug #906.
962 kes Make berrno class to leave errno unchanged after constructor call.
963 kes Make bnet_server use the heap rather than the stack to allocate
964 its socket fd pointers to avoid a crash at termination. Problem
965 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
967 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
968 and putting it in depkgs-qt along with Qt4.3.
970 kes Rework code in acquire.c that switches drives for reading when
971 the Media Type does not match. This should fix bug #906
973 ebl Fix a director segfault during job setup #907
974 kes Correct seg fault in postgresql when first operation returns no
975 rows. Fixes Dirks File browser problem seg fault with bat.
977 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
978 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
981 kes Implement PopUp YES/NO dialog for bat.
983 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
985 kes Correct RunScript to terminate job in FD on failure.
986 kes Change abort_on_error and AbortJobOnError to fail_on_error
987 and FailJobOnError in RunScripts.
988 kes Minor tweaks of code formating in RunScripts, principally to
989 avoid depassing 80 columns.
991 kes Eliminate one #ifdef Win32 in bsmtp
992 kes Implement grow tool to grow a file for testing very large databases.
993 kes Add big-vol-test to test Bacula seeking with > 5GB.
996 kes Modify find_next_volume() to return all values in Media record.
997 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1001 kes Update Release notes
1003 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1004 Warning, in previous beta version, all media get from scratch keep their
1007 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1008 This should fix bug #842. Made a note to look at removing the temp
1009 files at the end of the install.
1010 kes Add ability to mount and unmount a file device providing it is
1011 marked as being removable and has the appropriate mount and unmount
1012 commands defined in the Device resource. This fixes bug #830.
1013 kes When applying a storage override, release all previous storage
1014 definitions rather than just prepending the new storage.
1015 This should prevent a good deal of confusion.
1017 kes Implement ./configure search for qwt libraries.
1019 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1020 Win32 FD. This should fix bug #893.
1021 kes Remove an unnecessary beep in Win32 init code.
1022 kes Update copyright dates in Win32 executable about boxes.
1023 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1024 code with a BSD getopt.c and getopt.h.
1025 kes Remove sched.h from the Win32 compat directory -- not used.
1026 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1027 need to shut it down, do it through the services panel or the command
1029 kes Remove some inappropriate Bacula FSFE copyrights.
1030 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1031 kes Fix regress config non-portable test as pointed out by
1032 Florian Heigl <florian.heigl@gmail.com>
1033 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1034 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1036 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1037 Reported by Frank Sweetser.
1041 kes Fix client-only build.
1042 kes Integrate client-only fixes for bsys (initgroups) and conio from
1043 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1044 kes Make arguments to get_scratch_volume() in same order as other
1046 kes Rework the prune_volumes() subroutine so that after purging and
1047 no volume found in desired pool, it will check for a scratch
1048 volume. This prevents recycling the whole scratch pool.
1049 kes Add code to status storage to print boffset_t (largefile support).
1051 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1052 kes You now need a --with-qwt=<dir> to be able to build bat.
1053 kes Update src/win32/cats/bacula_cats.def to include the new
1054 db_get_query_dbids() call on Win32.
1056 kes Correct a problem when selecting a scratch volume and moving
1057 it to another pool that lost some columns.
1058 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1059 kes Enhance Autochanger error messages to include Volume and device name.
1060 kes Rework prune_volumes() code to take account of InChanger flag,
1061 and to handle recycling volumes going to the Scratch pool and
1062 current pool because the RecyclePool directive.
1063 kes Implement a better and more efficient db_get_query_dbids() to
1064 handle creating and passing back a list of DBIds.
1068 kes Start work on new more efficient DBId subroutine. First use
1069 will be for recycling volume to Scratch inchanger.
1070 kes Increase number of JobIds in pruning from 1000 to 10000.
1071 This to be replaced by above routine.
1072 kes Begin implementation of building Qt4 on Win32.
1073 kes Correct typo in fix I added for bad TLS shutdown.
1074 kes Pull 2.0.3 patches into patches directory.
1075 kes Update Release notes. Include qt-console in line count.
1076 kes Update Projects file.
1078 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1079 bug in migration code where a job that spanned two volumes
1082 kes Implement new BST_DESPOOLING blocked state. Change from locking
1083 during despooling in SD to blocking. This means that other threads
1084 can work with the device structure, in particular the reservations
1085 system while despooling.
1087 kes Fix return in reservation message queue that missed clearing
1088 the jcr lock (implemented 26Jun07 below).
1089 kes Rename a number of dev methods to make locking function names
1091 kes Document locking in lock.c. Move lock structures to new file
1094 kes Move reservations message lock to lock jcr only this
1096 kes Move main SD locking code into lock.c (new file).
1097 kes Update Win32 build to include lock.c
1101 kes Dirk committed the qwt library code for drawing graphs in bat.
1102 kes Tweak install of qwt so that it is integrated with ./configure.
1104 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1105 out by Eric (my typo).
1106 ebl Fix configure.in to get batch mode enable
1107 kes Return correct string from authenticate.cpp in bat when connecting
1109 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1110 spurious line drops when using TLS.
1111 kes Do not file reparse points when restoring a file that already
1114 kes Implement Windows reparse points -- similar to directories, but
1115 we do not descend into it. This is a first cut. They seem to
1116 be backed up, but restore is not yet tested.
1117 kes Remove restore_blocking in tls code when shutting a socket to leave
1118 it in blocking mode. Hopefully this will fix the encryption bug
1119 reported by Frank Sweetser.
1120 kes When opening a file for backup, tell the OS that we are going to
1121 read it sequentially -- optimization.
1122 kes Change variable names in authenticate_director() to not conflict
1123 with member names in bat. Caused great confusion with compiler,
1126 kes Queue openssl error messages in case of comm problem.
1127 kes Do shutdown() call if socket terminated.
1128 kes Remove some duplicated code in tls.c
1129 kes Move more of the bsock member variables into private and access
1131 kes Add Frank Sweetser's tls-test to the regression suite.
1133 kes Add Swedish sv.po file
1135 kes Don't print clock skew message in FD if less than 3 seconds diff.
1136 kes Add a bit of VSS info to status client.
1137 kes Implement a first cut of Vista VSS, using Win2003 code.
1139 Release: 2.1.20 beta
1141 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1142 loaded tape but uses first drive).
1143 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1144 This was indeed a Win32 issue.
1146 kes Simplify search of autochanger for in-use Volume.
1147 kes Fix exit condition of check for in-use volume. kes Remove
1148 inappropriate my_postgresql_free_result() in db_close()
1150 kes Fix bad return in FD when encryption signature not found.
1151 Probably caused a crash.
1152 kes Inhibit missing encryption signature error messages for
1153 file types where no signature computed.
1154 kes Correct inverted check on autochanger in reservation system.
1155 kes Tweak debug code in autochanger reservation.
1157 kes Add some additional locking in the cats directory in subroutines
1158 that modify packet variables called from batch insert.
1159 kes Rework how dcrs are allocated. new_dcr() can now be called
1160 with an existing pointer, and it will simply clean it up.
1161 This allows the reservation system to test various different
1162 devices, and will permit easy device changes.
1163 kes A bunch of changes all over to handle new new_dcr() calling
1165 kes Work more on the Volume management in the SD. Remember Volumes
1166 for tape drives and for autochangers (even virtual disk changers).
1167 kes When looking at the Volume list to reserve a drive, handle
1168 autochanger names correctly by interating through the changer
1169 devices. Also call the Director to see if a Volume is suitable
1170 for the current job.
1171 kes Fix some bugs in bscan. Make sure all media records are written.
1172 Make sure that valid JobMedia records are written for disk files.
1173 Previously they were completely wrong.
1174 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1175 that the URLs don't change and so that the developers will all
1176 work off the same copy. Rebuild from scrach.
1177 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1179 Release: 2.1.18 beta
1181 kes Fix seg fault in FD from incorrect digest size.
1182 kes Fix argument to non-OpenSSL crypto.c subroutine.
1184 Release: 2.1.16 beta
1186 kes Remove a few malloc()s from the encryption code.
1187 kes Use the class calls to bsock in filed/backup.c and restore.c in
1188 place of the old bnet_xxx code.
1189 kes Implement code that does an on the fly calculation of the
1190 signing digest during restore of encrypted files. It makes
1191 a best guess at the algorithm, and if it is not correct, will
1192 then revert to the old code which reads the file after it is
1194 kes Implement at least one missing crypto stream in stream_to_ascii()
1195 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1196 #877 where a reload with bad syntax causes Dir to exit.
1198 Cut: 2.1.14 beta (not released)
1200 kes Do not free a volume on a tape drive until another volume is
1201 mounted and read, or the autochanger unloads the volume.
1202 This should help the SD re-use volumes that are already mounted,
1203 and should fix bug #886.
1204 kes Apply patch from user brettedgar that allows gnome2-console include
1205 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1206 kes Apply patch from Lucien Weller that fixes day of week calculation
1207 because of DST flag problem. Fixes bug #887.
1209 kes Move find_next_appendable_volume() to after acquiring a valid device
1210 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1212 kes Unable to reproduce bug 872. However added additional testing for
1214 kes Bug #874 resolved by documenting SQLite limitations.
1215 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1216 kes Bug #881 resolved by removing typo in mtx-changer script.
1217 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1218 approval. Added a link to the wiki on the web page, and implemented
1219 a backup from http://paramount.ind.wpi.edu
1221 kes Fix update allfrompool to pass pool name.
1223 kes Convert to pure GPL v2 license.
1224 kes Fix sscanf problems reported by Peter Buschman that caused
1225 a bus error on Solaris.
1226 kes Rework (simplify) the select prompt in bat.
1227 kes Move get_jobid_from_tid() into lib and create a
1229 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1230 should definitely fix the problem of lost error messages in the
1232 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1233 kes Eliminate tcpd.h from the project. Enclose the #include from the
1234 library with extern C ...
1235 kes Add print of signal name when a signal is trapped.
1237 Release: 2.1.12 beta
1239 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1241 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1242 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1243 makes SQLit3 run 30 times faster, though a bit less safe.
1244 kes Implement --with-batch-insert in configure and detection of thread
1245 safe libraries. It is on by default, but turned off if no thread
1246 safe library (e.g. SQLite 2) is available.
1248 kes Fix Bacula PostgreSQL buffer overruns.
1249 kes Do better checking for NULL results returned from PostgreSQL;
1250 implement retry for failed queries; clear results buffer after
1251 failed query. Hopefully this will correct the PostgreSQL failures.
1253 kes Implement algorithm to handle only one appendable volume with
1254 Prefer Mounted Volumes = no.
1255 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1256 returned from a query.
1257 kes Make volume lock recursive.
1258 kes Implement an additional volume reservation algorithm that
1259 starts by considering all reserved volumes then uses the
1260 old brute force algorithm of searching the resources to
1261 find a suitable device.
1262 kes Add new reservations debug code and refine the old code.
1263 kes Update the win32/dll/bacula.defs file.
1265 kes Tweak reservations algorithm to permit a few more cases, i.e.
1266 volume reserved, but on different drive, ...
1267 kes Enhance SD status to include Pool and Media Type for drive in a
1268 more readable format (a bit longer).
1269 kes Fix PostgreSQL double free.
1271 kes Minor refactoring of restore decryption code.
1272 kes Add code to smartall.c to detect double free of a buffer.
1274 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1275 so that bsmtp will create a correct email address (mailbox only).
1276 kes Modify 'memory' command so that the buffers are listed as 'In use'
1277 to avoid confusion with Orphaned buffers.
1278 kes I reworked the OpenSSL include/lib flags to be handled in
1279 the standard Bacula way, which should fix bug #863 concerning
1280 non-standard OpenSSL libraries.
1282 kes Implement Help Browser window for bat.
1283 kes Fix reload bug that reset StorageId to zero.
1285 kes Fix TLS #ifdefing when TLS turned off.
1286 kes Ensure that when labelling a tape with Slot=0 that InChanger
1288 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1290 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1291 add DISTINCT (required by PostgreSQL).
1292 kes Implement BSOCK authenticate_director() method. Eventually will
1293 authenicate all daemons.
1294 kes Move several more functions into the BSOCK class.
1296 kes Add code to tell the OS that we no longer need a cached
1297 file that we were reading. In findlib/bfile.c. Also,
1298 only cache files that we are reading. Thanks to
1299 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1300 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1301 kes Implement script to automatically generate cats and dll .def
1302 files for Win32 dll.
1303 kes Update README.mingw32 to include new .def file generation.
1304 kes Correct typo in UTF-8 error message as reported by:
1305 jhernandez <julianhernandez@gmail.com>
1306 kes Add additional sm_check() code on debug level 1.
1307 kes Set default debug level to 1.
1308 kes Trap SIGABRT in attempt to get traceback.
1310 kes Reduce bat connect timeout from 30 to 15 seconds.
1311 kes More restructuring and implementing BSOCK class in place of
1313 kes Remove a few unnecessary malloc() tests in crypto code.
1314 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1315 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1316 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1318 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1320 kes Fix Verify InitCatalog. The attributes were not pointing to the
1321 correct saved location.
1322 kes Implement message callback so that GUI is sure to get all
1323 daemon messages. Currently displayed in a dialog in bat.
1324 kes Ignore SIGUSR2 (Bacula timer) in bat.
1325 kes Apply regress patch from bug #859 to allow regress to work
1326 with Solaris compiler.
1328 kes Begin adding TLS support to bat.
1329 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1330 clean up lex.c and make it more readable.
1332 kes Move more bnet functions into the BSOCK class.
1333 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1334 kes Complete change of berrno strerror() method to bstrerror()
1336 Release: 2.1.10 beta
1338 kes Cleanup incorrect email addresses in bsmtp.
1339 kes Make bat display initial messages rather than discard them.
1341 kes First cut of adding .mod to the run command.
1342 kes Implement auto display of messages in bat.
1343 kes Enhanced preferences to allow all Bacula output to be
1346 kes Try to make bsmtp date routines more generic.
1347 kes Fixed bug #856 autochanger documentation.
1348 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1349 kes Add new cats entry point so Win32 builds.
1351 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1353 kes Do better checking for the MySQL 64 bit libraries looking for both
1354 .a and .so libraries.
1355 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1356 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1357 kes Require the thread safe version of MySQL during configure. Thanks
1358 to Andre Noll for pointing this out.
1359 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1360 continuing in migration code.
1361 kes Apply implementation of tray-monitor font derived from gnome-console
1362 submitted by Andreas Piesk <a.piesk@gmx.net>
1364 kes Eliminate important memory loss in SQLite
1365 kes Fixed the batch insert MySQL thread specific data that was not
1366 being freed. See cats/mysql.c:db_thread_cleanup().
1367 kes Fix restore before command.
1368 kes Convert old hdr.name to name() in a few places.
1369 kes Implement update jobid command.
1370 kes Return all time_t dates in db_get_job_record()
1371 kes Stop watchdog in SD earlier.
1372 kes Put Pool just after Storage in please mount message.
1373 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1376 kes Update the po files.
1377 kes Fix Verify InitCatalog by making it cache attributes.
1379 kes Change name bacula-bat to bat for man 1 page to correspond to
1381 kes Check for client and store NULL pointers in status command. This
1383 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1384 kes Fix sign extended editing of %p.
1385 kes Clean out a little old #ifdefing in cats/mysql.c
1387 kes If time diff between DIR and FD is more than 600 seconds convert
1388 INFO message to WARNING.
1389 kes Implement heap size display in status for all daemons.
1390 kes Attempt to fix MySQL db open memory loss (not successfull).
1391 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1392 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1393 Query. This looks like a MySQL but but by doing extra releases,
1394 the memory goes away. This should fix bug #847.
1396 kes When backup fails, cancel SD before waiting for sd termination.
1397 kes If SD is waiting for FD to connect during cancel, wake up the
1399 kes Fix fsf code so that errno is correctly reported.
1400 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1402 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1403 so that Bacula doesn't later stumble into a seg fault.
1404 kes Use the term Restore Client in the restore Job report.
1405 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1406 the original job's FileSetId.
1407 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1408 spooling in migration jobs. Not yet tested.
1409 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1410 reading conf file from a pipe. However, do it with open_bpipe()
1411 rather than popen. Not yet tested.
1413 kes Fix an ugly bug where the VolCatBytes were getting updated
1415 kes Implement bconsole memory command that prints current memory
1416 usage, plus smartalloc dump.
1417 kes Clarify some error messages in backup, admin, and migrate.
1418 kes Shrink label dialog to smaller size.
1419 kes Invert Cancel OK buttons on restore to be OK Cancel.
1420 kes More strerror() to bstrerror() conversions.
1422 kes Start implementing bstrerror() in place of strerror().
1423 kes Stripping path -- seems to work.
1425 kes Prevent door and port files from being restored (mostly
1427 kes Free an unreleased buffer in compat code.
1428 kes Change console Job name from *Console* to -Console- to eliminate
1429 Win32 filename problems. Put Win32 path separator when creating
1430 Console file. This fixes bug #846.
1431 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1433 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1435 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1436 to force Win32 error message.
1438 kes First cut strip path. The data should be passed to the FD,
1439 but nothing is done with it yet.
1440 kes Enhance the digest and signature routines in the crypto
1441 library to accept a JCR and to use it to print error messages
1442 so that they will go in the Job report rather than the daemon's
1444 kes Simplify some of the verify signature code.
1445 kes Simplify a few of the alternative returns in the signature
1448 ebl Use only POSIX regex instead of GNU regex in breg.c for
1449 File relocation. It fix broken freebsd compilation.
1450 kes Convert all other Dir files to use new ua class message
1452 kes Tentative fix for missing digest signature in bug 807.
1453 kes Correct handle problem in new win32_ftruncate routine.
1454 kes Convert ua_purge.c and ua_update.c to use new ua class
1455 message routines for bat.
1457 kes Correct incorrect installation of LICENSE in Win32 installer.
1458 kes Display LICENSE at the beginning of the Win32 install.
1459 kes Attempt to correct the need for the png files to be installed
1461 kes Reapply my bat.conf install script in qt-console. I think I
1462 editted bat.pro instead of bat.pro.in and it was lost.
1463 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1464 the /var/lock/subsys for subsysdir. Also corrects typos in the
1467 kes First cut update job.
1468 kes Correct configure to include qmake of src/qt-console directory.
1470 kes Make restore job yes/mod/no print in one command so GUI works.
1471 kes First cut implementing backup and restore client.
1472 kes Correct editing in Verify output that caused a seg fault.
1474 kes Insure that bat.conf is not overwritten during installation.
1475 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1476 while I was implementing migration in March 2006 !
1478 ebl Cleanup file relocation, using char *RegexWhere instead of
1479 char *where + bool where_use_regexp
1480 kes Update some manpages and add bat manpage.
1481 kes Make a first cut at converting bacula.spec.in for bwx-console
1483 kes Apply patch from John Goerzen to add hostname as fourth argument
1484 to make_catalog_backup script.
1485 kes Fix typos I introduced into bsmtp.c
1486 kes Make pm_strxxx() routines handle input of NULL pointer. This
1487 is to protect from NULL pointers returned from SQL databases.
1488 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1489 kes Add more debug to FIFO code -- fix fifo regression test.
1491 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1492 kes Add thread timer to bnet_connect() to break from OS if wait time
1495 kes Update Win32 build to include new files, new symbols, and
1497 kes Implement socket level heartbeat (tcp_keepidle)
1498 ebl Commit File relocation patch
1499 kes Make bat have 'make install' target.
1500 kes Warn during install if old gnome-console binary found.
1501 kes Warn during install if old wx-console binary found.
1502 kes Add -8 option to bsmtp command line to add content type utf-8.
1503 Fixes bug #809. (Character coding problem in bsmtp).
1504 kes If < is found in target (from, to, cc) then do not enclose the
1505 target in < > in bsmtp. Fixes bug #772 (malformed address).
1506 kes When printing certain items in dbcheck, stop after 300000.
1507 Fixes bug #822. (dbcheck loops).
1508 kes Incorrect status in Dir after waiting for mount with poll set.
1511 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1513 kes Print waiting to reserve a device every 5 mins.
1515 kes Don't call close_part in label.c if tape and relabel.
1516 kes Don't free volume if busy in close() -- should help with
1518 ebl Fix #824 RunScript bug (After script could be execute twice)
1519 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1520 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1521 Add a regression script to test RunScript
1523 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1526 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1527 deprecated. No additional bugs will be fixed, and they will be dropped
1528 in a future release (probably 2.4.0).
1529 kes Change name of wx-console to bwx-console to make it more Bacula
1531 kes Change the name of gnome-console to bgnome-console to make it
1534 kes Some time in March, a Feature Request with patch from Jorj Bauer
1535 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1537 The ability for the director to validate a Client (FD) CN against
1538 an arbitrary set of patterns rather than the hostname, with
1539 A new 'TLS Allowed CN' set of directives which are implemented
1540 in the Client resource. Then pattern matching is used in place
1541 of hostname matching against the Certificate's CN. As an example, we
1542 have certificates which (a) use a local CA, and (b) have a CN of the
1544 kes Add new/changed entry points to Win32 build
1545 kes Create unaccepted-projects for projects that are not accepted.
1546 kes Simplify locking in the reservations system.
1547 kes Add more debug code in reservations.
1548 kes Make sure error condition on reserving a volume is handled correctly.
1549 kes Correct handling of volume_in_use.
1550 kes Correct handling of initializing a device.
1551 kes Move handling of broadcasting releasing a device into release_device().
1552 kes Correct attaching dcr to dev so that it is only done if device
1553 is properly initiated.
1555 kes Locking debug level tweaks in SD.
1556 kes Tweak new Volume code.
1558 kes Add exec external-command [wait-seconds] to bconsole. This
1559 executes the external-command. Note! normally external-command
1560 should be enclosed in double quotes.
1561 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1562 it should normally be off in a production system.
1564 kes Implement die command for SD so that we can force it to dump.
1565 kes Implement SD lock debug code.
1566 kes Implement new algorithm for keeping Volume list in SD. It
1567 is now owned by the device.
1569 kes Implement new code for freeing in use volumes that should
1570 resolve if not all, some of the problems of multiple drive
1571 tape conflicts described in bug 801.
1573 kes Fix gui/bacula-web/images files in svn.
1574 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1576 ebl Fix a bug in batch mode (in string escape)
1577 kes Correct migration prune SQL typo that crept in in a
1578 recent 2.1.x change.
1580 kes Move bnet_despool() into class in bsock.c
1581 kes Modify job report to include director name and Build OS.
1582 kes Move drop root privilege and check_catalog() before fork.
1583 kes Add update database scripts (version 9 to 10) to updatedb directory.
1585 ebl Check size and age of each file after its backup to see if
1586 it has changed during backup, if 'checkfilechanges' is set.
1587 The FD will do an extra check (stat(2)) after
1588 each file backup. mtime, ctime and size are compared with
1589 'before backup' information. If time or size mismatch, an
1590 error message will be generated. You must upgrade FD to use it.
1592 kes Make database name and user configurable
1593 --with-db-name=xxx --with-db-user=xxx
1594 kes Add back database type to message.c for debugging.
1596 kes Implement dir_sql() which issues an SQL query.
1597 kes Modify bat medialist to use dir_sql() and do some minor C++
1598 formatting as well as eliminating a number of pointers, simplifing
1601 kes Fix some of the mtx-changer grep commands for tape label readers.
1602 kes Convert a number of bsendmsg into the appropriate send/warning/error
1603 message class calls.
1604 kes Suppress the using database message in the .sql command.
1605 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1607 kes Add context menu for floating a window.
1608 kes Some minor cleanup and name changes in qt-console
1609 kes Add doing mt setblk 0 in Win32 mtx-changer.
1610 kes Apply Martin's bug fix to move definition of ENODATA for
1612 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1613 sqlite2 and sqlite3.
1615 kes More pruning cleanup.
1616 kes Turn on wait_for_drive by default in mtx-changer.
1617 kes Turn on Batch insert code by default as it now passes regression.
1618 kes Add ./configure --enable-bat to enable building of Bat.
1619 No install yet though.
1621 kes Implement a new .sql command for bat.
1622 kes Implement code to turn off pruning in obtaining the next volume.
1623 Pruning is turned off for the status dir command, but turned on
1624 for SD requests and for the list nextvolume command.
1626 kes Correct Qmsg() that was not updated correctly when committing a
1627 previous change (probably the recent TLS patch).
1629 kes Write new subroutine is_volume_purged() that explicitly checks
1630 if the Volume is purged, and if so marks it as such. This should
1631 resolve problems reported about needing to mount twice to recycle
1633 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1634 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1635 amount of duplicated code.
1636 kes Do volume pruning only for the Media Type desired (reduces pruning time
1637 if multiple Media Types are in the same pool).
1638 kes Implement more detailed info in the Job report for the Bacula version
1640 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1642 ebl Add bbatch tool to bench database and insert mode.
1643 Fix sql quote stuff in batch mode
1644 Fix sql stuff for mysql
1646 kes Correct problems with am/pm scheduling. Fixes bug #808.
1647 kes Implement new prunning code that prunes up to 1000 jobs at
1648 the same time. The same technique can be applied to a number
1649 of other prune/purge subroutines.
1650 kes Add an insanity check when starting a new tape job to ensure
1651 that the tape position has not been changed. If so fail the
1653 kes Fix Win32 build for dlls to add the folllowing:
1654 src/lib/bsock.c -- new file with new entry points
1655 src/lib/dlist.c -- new entry points
1656 src/cats/sql_create.c -- new entry point
1657 src/cats/sql_cmds.c -- new DATA item exported
1659 ebl batch mode cleanup bscan-test is ok now.
1660 kes Implement SD code to check length of disk volume before appending.
1662 kes Correct return status on db_batch... routines.
1663 kes Add call to db_write_batch_file_records() to migration code.
1664 ebl Fix AfterJob timing
1665 kes Move the checking of the database in initializion of the Director
1666 to after we drop privileges. This avoids the need for both root
1667 and bacula access to the DB.
1668 kes Correct a misplaced variable definition in src/filed/backup.c
1669 kes Correct how the new batch insert db_create_attributes_record()
1670 uses the arguments. Caused a seg fault in bscan.
1671 kes Implement lock() and unlock() methods in DEVICE class.
1672 Implement block() and set_block(xx) methods in DEVICE class.
1673 kes Modify bnet_connect() so that it uses time() to check for the
1674 wait time expiring (on some OSes, some system calls may not
1675 return immediately).
1676 kes Modify Verify to obtain the previous JobId when it is actually
1677 running rather than at schedule time (as it was in 1.38.x).
1678 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1680 kes When checking pid in pid file, continue running if the pid is
1681 the same as ours. This occurs on IRIX after a system crash.
1684 kes Extend new GUI API.
1685 kes Make the ua structure a class, and implement send_msg(),
1686 error_msg(), warning_msg(), and info_msg().
1688 kes Apply fix from for building wx-console on the Mac from
1690 kes Implement new select mechanism for GUI programs.
1691 kes Reorganize initialization of stackedWidgets in bat.
1693 kes Add updated nagios plugin supplied by Christian Masopust.
1695 kes More bat implementation.
1696 kes File migrate bug with Pool Occupancy using mediaid instead
1697 of jobids. Fixes bug #795.
1698 kes Fix orphaned buffers in filed backup and verify due to
1699 crypto buffers not freed during errors. Fixes bug #789.
1700 kes Extend new GUI api code to tree commands.
1701 kes Ensure that tree and dot commands check console ACLs.
1702 kes Permit marking directory with trailing slash.
1703 kes Allow 20 console connections (instead of only 10).
1705 kes Add smartctl call to bacula-sd.conf as an example of getting
1708 kes Modify jobq.c to let simultaneous restore jobs run. This may
1709 cause them to fail if they cannot get a drive.
1710 kes Add Client Connect Wait to Storage daemon to permit users to
1711 modify the time the SD waits for a FD connection.
1713 kes Correct virtual changer check which was backwards. This caused
1714 volumes to be unloaded into slots already occupied.
1716 kes Apply Command ACL filter to JobId list in restore command.
1717 kes Correct typeo in var.c patch.
1719 kes Don't let Bacula prune File or Job records for the current Job.
1720 kes Fix variable substitution pad + inc bug reported (with patch)
1723 kes Correct SQLite log table index as reported by Luca Berra.
1725 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1727 kes Begin implementing new comm signals for API.
1728 kes Fix a few places in lib/message.c where the open fd may
1730 kes Continue implementing lib/bsock.c (real class). Make jcr,
1731 who, host, and port private. There are new methods to access
1732 them for non-class use. This required touching a number of files.
1734 kes Add LANG=C to autoconf/randpass so it works with languages other
1735 than English. Fixes bug #788.
1737 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1739 You will not be able to generate Include/Exclude list any more.
1740 It will be fixed soon.
1741 If you want to use this, you can apply
1742 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1744 kes Restore of sockets created false error messages because Bacula
1745 no longer restores sockets, but the code was still trying to
1746 set the attributes on a non-existent file. Reported by a user.
1747 ebl finish RecyclePool feature
1748 Media will takes Pool.RecyclePool
1749 when moving from Scratch to a Pool or when user will do
1750 update volume=xxx frompool
1751 To use it, add RecyclePool = aPool to your Pool resource
1754 RecyclePool = Scratch
1758 kes Expand new BSOCK class adding signal() and new BNET signals.
1759 kes Begin enhancing the dot commands adding a new API function
1760 that returns more information and will make it easier
1761 to interface to the Director from a program.
1763 kes Make DEVICE fd private. Its new name is m_fd, and can be
1764 obtained with dev->fd() outside the class. This is the
1765 first of many DEVICE members to be made private.
1766 kes Implement Michael Renner's idea on having a virtual disk
1767 changer. I made some minor modifications (e.g. I did not
1768 implement the Virtual Changer directive, but simply set
1769 the Changer Command to an empty string.
1771 kes Implement a BSOCK send() method that writes the whole record
1772 in a single write() request rather than in two.
1773 ebl add update volume=xxx recyclepool=yyyy
1774 volume takes recyclepool from pool when using update volume=xxx from pool
1776 kes Fix encryption deblocking bug, which caused some restored files
1777 to be truncated. This fixes bug #763.
1778 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1779 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1781 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1782 ebl Use btime_t instead of uint64_t in media patch.
1784 kes Optimize the use of the database a bit in the Status dir command.
1785 Only open it when needed, ensure that if any previous database
1786 was opened, it is closed.
1788 kes Correct VolCatBytes bug from media patch.
1789 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1790 in the case of orphaned records.
1791 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1792 and File records in 300K chunks to be more efficient. This
1793 idea came from Juan Luis Frances (if I remember right).
1794 kes Apply Eric's scratch patch that moves a purged Volume to
1795 the RecyclePool. Question: how is RecyclePool set? what
1796 happens to the ScratchPool?
1797 kes Apply Eric's media patch that collects read/write media
1798 times as well as byte counts. This patch requires a
1799 simultaneous upgrade of the DIR and SD. Note, there
1800 should be some way to turn off timing. I'm not sure
1801 times are in Bacula units.
1802 kes Apply Eric's batch-insert patch.
1804 kes Update projects list.
1806 kes Implement Include/Exclude file lists in FD as dlists using
1807 the new dlistString class. This permits efficiently having
1808 large include/exclude lists and completes project Item 25.
1809 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1810 console is authorized to cancel the job. This fixes bug
1812 kes Modify SD so that the VolCatJobs medium record is updated
1813 at the beginning of a Job rather than the end. This
1814 fixes bug #775 where exceeding MaxVolJobs caused jobs
1816 kes Added a mutex around getting and setting Volume information
1817 so that multiple simultaneous jobs will single thread.
1819 Switch to using Subversion
1820 kes Remove src/pygtk-console/ from configure
1822 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1823 plus the entrypoints.
1824 kes Apply patch supplied that corrects debug print
1825 in canceling jobs for max run time. Supplied as
1826 part of bug #621, which was previously fixed.
1828 kes Test on job_canceled() and sd_msg_thread_done inside
1829 loop starting the message thread to avoid a race condition.
1831 kes Remove rl_catch_signal from console.c as it conflicted
1832 with the header definition. Fixes bug #765.
1833 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1835 kes Clarify some stored/acquire messages to indicate if the
1836 problem is with read or append.
1838 kes Fix memory leak with storage ids in cats/sql_get.c
1839 kes Terminate watchdog earlier to avoid reference to released
1840 memory -- reported by Jason Austin.
1841 kes Move closing the database from jobq.c to the director daemon
1842 termination routine. This fixes memory leaks for shadow jobs
1843 (i.e. migration jobs).
1844 kes Free up the unique jobid chain items in migrate.c. This fixes
1845 a memory leak problem.
1846 kes Convert some ugly looking for statements to use foreach_alist
1847 in findlib/find.c. This will facilitate converting the structures
1848 to use dlist (for large include/exclude lists).
1849 kes Fix a bug in the btree.c and btree.h routines, then rename them
1850 rblist and add them to be built in src/lib. Include some new
1851 methods written by Rudolf Cejka that make the code more readable
1852 (hides some of the ugly casting).
1853 kes Add set_next() and set_prev() methods which make the code much more
1854 readable. Also add a new dlistString class that facilitates storing
1855 strings in dlists. To be used in the large include/exclude lists.
1856 kes Make some trivial modifications to lib/tree.h that use rblist
1857 rather than dlist for storing the tree links. This was suggested
1858 by Rudolf Cejka. The result of this is that the restore tree now
1859 uses red-black binary trees rather than simple linked lists. This
1860 should give rather dramatic speed improvements for directories
1861 contining large numbers of directories/files (more than 10000).
1863 kes Fix maxruntime bug #621.
1865 ebl Implement the include JobID in spool file name project.
1866 kes Reorder projects file in order determined by Jan 2007 vote.
1867 kes Implement item #12 on project list -- quick release of FD by
1869 kes Fix open of SQLite3 db where user does not have write permission
1870 so that DIR does not crash. Fixes bug #761.
1872 kes Add back missing @ in Win32 Makefile.
1873 kes Change 'Device not configured to autolabel' from INFO
1875 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1876 which should restart an indefinite # of times.
1877 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1878 other DIR specifications.
1880 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1881 Fix path quoting in SQLite scripts.
1882 Fix problems with SHGetFolderPath.
1884 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1886 kes Fix Job restart on error bug that promotes an Inc to a Full
1887 backup. This should fix bug #755.
1888 kes Add qt-console and first cut of code.
1892 kes Fix Bacula->Documentation link on Win32 to point to index.html
1893 instead of bacula.html. Fixed bug #750.
1894 kes Return JobId in db_get_job_record() when JobId==0. This should
1896 kes Do not release source pointers when restarting a failed job.
1898 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1899 This *should* fix bug #747.
1900 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1903 kes Modify USTORE constructor to set an empty store_source string,
1904 and don't copy the store_source string in a cancel. Hopefully
1905 this will fix Arno's seg fault, bug #744.
1906 kes Add back code to disable conio in configure. Fixes bug #743.
1907 kes Correct the Options scanner in the FD to correctly handle
1908 SHA1 option, which was eating the next option. Reported by
1910 kes Add code to indicate when the SD is spooling, spool wait, and
1911 despooling as requested by Alan Brown.
1913 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob