1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
34 kes Add VirtualFull for bat.
35 kes Changes to get read storage correct for Virtual Backup.
37 kes Remove old code from label.c
38 kes Split display_display_info() out of write_bsr_file()
39 kes do_vbackup_init() working -- i.e. bootstrap file built.
40 kes Change Bacula trademark owner from John Walker to Kern Sibbald
41 kes First non-working cut of vbackup
42 kes Correct FD heartbeat code to use volatile variable accessed by
44 kes Zero thread id with memset if on Win32 in case it is a struct.
45 kes If cannot create JobMedia record, continue to try to write eof
46 and clean up in block.c
48 kes Add code to interface OpenSSL to new Win32 pthreads code which
49 used a structure for thread_t.
51 ebl tweak bat for win32 compilation
53 ebl Remove tokyo cabinet from the source
54 ebl Update configure/autoconf to support berkeley DB
55 ebl Add a sort to db_get_file_list() to improve bsr construction time.
57 kes Add a mtx-changer.conf file that is not overwritten during
58 an upgrade. It fully configures the mtx-changer script.
59 kes Clear in-use bit on vol when unused while swapping.
61 kes Remove sleep at end of ./bacula
62 kes Clear hash packet for hardlinked files correctly. This corrects
63 a long standing bug where hardlinked files selected individually
64 would occasionally not be restored.
66 kes Apply Eric's patch to ensure that autoprune does not return
67 a Volume not in the autochanger unless requested to do so.
68 kes Correct bat restore display of multiple drives. This fixes
70 kes Do find_a_volume() each time an unload is done. This
71 fixes the failure of maxvol2-test.
73 kes Add some SD debug code.
74 kes Do find_a_volume() each time an unload is done.
75 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
76 and adds --with-db-port to ./configure.
77 kes Use Qmsg() in job.c watchdog callback.
79 kes Release main control rwlock if ABORTing.
80 kes Make watchdog connect timeout queue messages rather than sending
81 directly to avoid lock conflicts with the real thread.
82 kes Add const char in dbd.c to avoid compiler warnings.
83 kes Fix python compiler string warning. Note, IMO the GNU C++
84 compiler guys have made a *very* bad change to their compiler.
85 They now force all strings to be 'const' unless you explicitly
86 cast them, which is extremely ugly and ruins nice code as well
87 as creates a lot of useless work.
89 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
90 mt. This fixes bug #1116.
91 kes Add const in python files to reduce compiler warnings.
92 This may have to be backed out because of later compiler
94 kes Fix failure of 2drive-concurrent-test. Always read label;
95 clear_unload() only after drive is defined in acquire_for_read().
97 kes Generally clean up the manual tape loading code. The main
98 conceptual change is that when a volume is marked to be unloaded,
99 its volume name is retained, and it is only marked as unloaded
100 when either the autoloader says it is unloaded or another tape
101 is read on that drive.
103 kes Add debug code and refactor subroutine in stored/mount.c
104 kes Fix format problem in bscan output reported in bug #1105.
105 ebl Fix get_next_volume_for_append logic with autochanger
106 - use pruned volumes if found
107 - don't reset the inchanger flag after getting a recycled volume
109 Fix recycle_oldest_purged_volume to take InChanger flag in account
111 ebl Add mmap/unmmap implementation for tokyodbm under win32
113 kes Make first step toward eliminating globals from config
114 scanning. Also should be a workaround for FORTIFY_SOURCE
115 GNU C bug -- fixes bug #1042.
117 kes Apply duplicate job tests to restarted jobs.
118 kes Copy more data when restarting a job so that run
119 overrides are kept. This should fix bug #1094.
121 kes More word alignment cleanup.
122 kes Fix bug where SD did not ask operator if the device could not
123 be opened. Reported by Eric.
125 kes Add dbuser to DIR conf file (replaces user).
126 kes Add --with-db-password to ./configure
127 kes Fix regress to handle db_password.
128 ebl Add new "status storage slots" that list autochanger
130 ebl Update vtape driver to compile only under Linux.
131 ebl Fix a bug when restoring with a wrong mediatype.
133 kes Eliminate ints from conf files and structures to avoid
134 word alignment problems
136 kes Fix bug reported by Scott Barninger where the bacula script
137 refers to scripts in the wrong directory. Needed to meet the
138 requirements of recent FHS location changes.
139 ebl Disable vtape for FreeBSD.
141 ebl Modify disk-changer to check if slot contains something before
144 ebl Fix vtape on win32 and debian.
145 ebl Fix autoselect patch (cause segfault).
147 ebl Fix autoselect option broken for a while. Fix #1089. Need some
148 work with StorageId to be able to use a particular drive in a
151 ebl Rename vtape to vtape.
152 ebl Update vtape driver.
154 ebl Modify vtape driver to avoid sparse file.
155 kes Add make clean of qt-source directory during ./configure
156 kes Store last block number written to tape in DEVICE and
157 use it for testing for correct last block on EOT.
159 Release Version 2.4.0:
163 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
164 This fixes bug #1095.
166 kes Add create_postgresql_database.sql to Win32 installer. Should
167 fix problem reported by Juilio Monteiro.
168 kes Get correct slot when auto unloading a device. This fixes bug
171 kes Fix multiple media restore.
172 kes Make DEVICE Slot private and access it via a method.
173 Allows better control over when it is set and cleared.
174 kes Fix possible seg fault if SQL error.
176 kes Add Martin's fixes to argument scanning for the estimate
177 command. This fixes bug #1093.
178 kes Add debug code to SD.
179 kes Fix renaming a Volume, which used the wrong Volume name.
181 kes If operator has rewind tape, print warning, release tape and
182 try once more. If tape is positioned somewhere, something went
183 wrong, so mark the tape in error and try once more. Previously
184 this error was fatal, now it produces an error message.
185 kes Ensure correct volume name displayed during restore
186 kes Ensure that Volume is mounted for restore.
188 kes Fix a few more Coverity reported problems.
190 kes Apply Allan Black's status dir job count patch.
191 ebl Add information about IMPORT/EXPORT slots in mtx-script.
192 kes Enhance a couple of SD debug messages.
193 kes Tweak unload flag setting and ensure it is set during swap.
195 ebl Fix #1091 about bad output in estimate command.
197 kes Modify autochanger locking to attempt to avoid race
199 kes Make sure device not busy before doing label command.
200 kes Display open() errors except when polling. Previously too
201 many were suppressed. This should fix bug #1070.
202 kes Fix Win32 reparse points. Bacula will not recurse into any
203 reparse point directory, including mount points, unless the
204 directory is explicitly mentioned at the top level (same as
205 with Unix). A file that is linked to another file will be
206 backed up -- much as Unix does for hardlinked files.
207 This fixes bug #1041.
209 kes Remove double quotes from ChangeLog and ReleaseNotes
210 kes Remove StorageId test when pruning and recycling (Eric's changes).
211 kes Remove old form of locking when getting volumes -- causes deadlock.
212 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
213 the name unique and to eliminate compile time error.
214 kes Add accurate.o to Win32 FD Makefile
216 kes Fix cats dll build on Win32 after db_update_job_end_record
217 calling sequence change.
218 ebl Switch to tokyo dbm instead of htable in accurate code
219 ebl Include tokyo dbm to bacula source tree
221 kes Fix buffer overruns detected by Coverity.
223 kes Tweak joblog display.
225 kes Implement --without-qwt
226 kes Fix layout of restore tree dialog
227 kes Add configure bat QWT libraries, so that bat can be built
228 with or without the QWT libaries.
230 ebl Add dummy tape driver for regression tests.
231 kes Make sure we unload the right slot when swapping.
233 kes Add debug times, reduce size of two-pool-changer test
235 ebl Tweak autoconf scripts for vtape
237 kes Improve SD reserve debug code.
238 kes Testing an improvement to free up volumes no longer in use.
240 kes Rework SD acquire for read to handle autochanger Volume
242 kes Implement regression that explicitly tests swapping a Volume
243 from one drive to another.
244 kes Enhance disk-changer to detect most error conditions.
245 kes Fix SD code so that it properly swaps a Volume between drives.
246 This fixes bug #1083.
248 kes Apply libdbi patch from Joao Freitas for regress and for
249 Bacula trunk. Regress now works with libdbi. Nice.
250 kes Apply .nobackup patch from bug #1077 submitted by
252 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
253 name into jobs cloned via the run directive.
255 kes Prevent a Volume that is being swapped from being freed from
256 the volume list. This will most likely fix, at least partially,
258 kes Fix strippath so that it does not get a buffer overrun and crash FD.
259 This fixes bug #1078.
260 kes Remove 50 millisec wait in SD that broke debugger.
261 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
262 that a job may run, counted from when the job was scheduled.
263 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
264 a job may block waiting for a resource, counted from when the job starts
265 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
266 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
267 that implements multiple commands per line in the console when using
268 readline. Modify the default to use a semicolon as the command separator.
270 ebl Fix SQL query in migration code.
271 ebl Make accurate mode with hash disk pass regression tests
273 ebl Implement first cut of accurate backup with hash disk.
275 kes Force unload of volume when wrong volume mounted in SD.
277 kes Fix bat seg fault at termination.
278 kes Add Bacula generated version to bat about box.
281 kes Experiment with allowing multiple read jobs.
282 kes Move final volume swapping code to DCR method and
283 call it from acquire_for_read().
284 kes When wrong volume is mounted during read, unload_autochanger.
286 kes Integrate the libdbi changes from Joao Henrique Freitas
288 kes Stop searching for Volumes in SD askdir if DIR returns the
289 same volume name twice in a row.
290 kes Close bat console windows first to eliminate error message
293 kes Tweak the swap Volume from one drive to another code so that
294 it now seems to work.
295 kes Resolve several problems with recycling that broke the new
296 code (these problems are in 2.2.9 as well).
297 kes Remove the volume lock when calling the sysop code.
298 kes Don't mark a reserved volume with no writers as unused otherwise
301 kes Rework class structures for VOLRES, DCR, and DEVICE to make
302 the method names a bit more logical, and for more logically
303 handling the responsibilities.
305 kes Remove redundant code in terminating the scheduler that just
306 causes a seg fault in many cases.
307 kes Cleanup releasing a volume and make it a DCR method.
308 kes Improve algorithm for detecting pre-reserved volume and
311 kes Tweak volume swapping code so it works.
312 kes Correct name overloading in mount.c
313 kes Replace released flag in VOLRES with reserved and add access
314 methods for the VOLRES class.
315 kes Prevent volume from being released while being swapped.
316 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
318 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
320 kes Refactor parts of stored/mount.c
322 ebl Add sanity checks for VolWriteTime and VolReadTime
323 ebl Take care of bad clock changes while computing VolWriteTime
324 and VolReadTime. This should fix or limit #1066
325 kes Correct error string numbers in dird/catreq.c
326 kes Restructure reserving, acquiring, and mounting volumes. Calls to
327 autochanger are deferred for mount.c -- simplifes the code.
329 kes Do not prune any running job. It just fails the job.
330 kes Lock the volumes when changing dev->reserved_device and marking
331 the volume unused otherwise the device can get reserved by
332 another job before the volume is released, thus blocking it.
334 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
335 kes Fix bug #1063, reuse of freed ptr in list nextvol.
336 kes Release regex compile buffer in filed/job.c
337 kes Add proper type of const char in sql_create.c
338 kes Turn off debug in daemon termination routines
339 kes Move free_volume_list() before devices are freed in stored.c
340 kes Fix reference to uninitalized stack variables in bregex.c.
341 This should correct bug #1067.
343 kes Fix possible seg fault in SD when freeing a volume entry.
345 kes Implement unload_dev() before swap device.
346 ebl Add statistics prunning with option and menu
347 kes Separate unload_dev() from unload_other_device() in autochanger.c
349 kes Apply patch from bug #1069 that corrects spurious error messages
350 when ACLs enabled on SGI but no ACL exists.
351 ebl Fix small segfault in bacula-sd when debug level is 500
352 kes Modify run_program() and run_program_full_output() to use
353 call by reference for the results string. This corrects a long
354 standing problem where the address of the string may be changed
355 in the subroutine but not in the calling program.
357 kes Re-enable code to remember last volume mounted on a non-tape
359 kes Add patch supplied in bug #1068 that fixes a SD crash when using
360 a Virtual autochanger.
361 kes Generate correct JobMedia records during spooling/despooling when
362 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
363 <tih@hamartun.priv.no> for excellent analysis and testing.
365 kes Tweak hash algorithm for htable using Martin Simmons idea
366 for doing a circular shift.
367 kes Remember what volume is in VTLs (previously turned off for
369 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
370 pointed out some problems in creating JobMedia records during
371 spooling with concurrent jobs. Fix the problem by updating the
372 start file position before despooling and generate a jobmedia
373 record at the end of despooling.
375 kes Fix handling of JobMedia records during spooling and when a
376 Volume is changed without actually writing data to the Volume.
378 kes Rework certain SD locking based on gdb tracebacks of deadlocks
379 sent by Eric. This code now uses only the volume_lock() rather
380 than the reservations lock when at EOM and acquiring a new
382 kes Ensure only one exit point in several subroutines.
384 kes Implement bsock code to permit locking. Use the new code in Verify
385 in the FD to prevent the heartbeat thread from disrupting the Verify
386 data sent to the Dir.
387 kes Modify SD locking to eliminate locking the reservations system from
388 outside the system. Use the volume lock when getting media data
389 and reserving a new volume at end of media.
390 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
391 when SD starts are not locked into place.
393 kes Fix error compiling runscript code on 64 bit machines.
394 kes Tweak Win32 mount point code.
395 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
396 cleared giving bad file estimate).
397 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
400 kes Keep Schedule run lists in order as suggested by
403 kes Implement autostart scripts for Debian.
404 ebl Implement upgrade catalog scripts.
406 ebl Apply jobstat patch for long term statistics. Have to implement
407 purge stats command and upgrade scripts.
408 kes Fix mtx-changer.in for broken Debian mt program.
410 kes Fix large number of JobMedia records reported by Eric Bollengier.
412 kes Apply doc fix from bug #1062.
413 kes Resolve crash and improper restore wx-console Win32 restore
414 GUI. Fixes bug #1065.
415 kes Update Win32 wxWidgets to latest version.
416 kes Attempt to do correct handling of Win32 mount points. Should
418 kes Fix Win32 FD backup/restore memory leak due to improper termination
419 of BackupRead/Write. This fixes bug# 1038.
421 ebl Reduce memory usage for accurate backup, working only with ctime
422 and mtime. (not all Lstat field)
423 About 40MB for my Linux system (400.000 files)
425 kes Add dcr->reserved_volume flag that allows us to release a volume
426 even if it is not vol->released. This allows maxvol2 to work when
427 Volumes expire and we are already writing to the device (i.e. a
428 volume is pulled out from under us by another job terminating after
429 we reserve the drive).
431 ebl Permit multiple command/console per runscript definition.
432 RunScript { command = /bin/true ; command = /bin/false ... }
433 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
434 (restart an application) just after the VSS snapshot on windows.
435 kes Don't zap dcr values during release_volume() as they might
436 have the next Volume to be mounted.
437 kes Fix AIX prototype.
439 kes Second cut of drive switching during backup.
442 kes Update Win32 version of wxWidgets to most recent version.
443 kes Tweak Copy job details.
444 kes Rework dir_find_next_appendable_volume to make a bit more effort
445 to find a suitable volume before giving up.
447 kes Make ask_sysop_to_create... to return if waken from wait.
448 This helps get out of blocked conditions.
449 kes Experimental implementation of switch_device in reservations.
450 kes Implement FD version to allow easier protocol changes.
451 kes Add Plugin Options string -- not yet passed to FD.
452 kes Implement PluginOptions ACL.
454 kes Attempt to correct problems with restores with autochangers and
455 use counts going negative
456 kes Rework SD status command and implement API for bat. Implements
457 header, runing waitreservation, devices, volumes, spooling,
458 and terminated status keywords.
459 .status storage=xxx <keyword>
460 kes Clarify TLS error message by adding double quotes around name.
461 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
462 kes Pass jcr to tls routines so debug messages can be handled better.
463 kes Rework jobq resource allocation code, and possibly fix a bug
464 that caused reference counts to get out of sync.
466 kes Rename fd/dir plugin to use Bacula standard underscore.
467 kes Plugin work -- bring dir up to fd level.
468 kes Start implementation of VTL code
469 kes Fix Win32 build after adding new cats subroutine.
471 kes First cut at Duplicate Job implementation.
473 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
474 kes Start PluginOptions string, and refactor a bit of ua_run.c
475 ebl Apply Allan patch that permit to reset recyclepool.
477 kes Test patch -- possible fix or improvement for bug #1053
478 kes Refactor FD and SD status commands to permit new API code in
479 SD, and to fix Win32 build.
480 kes Win32 build is now working.
482 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
483 some ideas in patch from Scott Bailey.
484 kes Begin implementation of duplicate Job control.
485 kes Fix some of Win32 build after recent additions.
486 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
487 which causes the FD to detect whether or not the OS has the
488 honor no dump bit (*BSD systems), and if so, to skip backing up
489 any file with this bit set. The feature is enabled by setting
490 'honor no dump flag = yes' in the Options section of a FileSet.
492 kes Correct po warning message with datarootdir
493 kes Implement more code in dird.c to put configuration parsing in
494 a class rather than use globals.
495 kes Restructure SD status command for implementation of bat API
498 kes Suppress incorrect 'Will not descend from x into y' messages.
499 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
500 daemon globals used by parser.
501 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
503 kes Fix free of plugin_list when none exists.
505 ebl Apply accurate project patch.
507 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
508 on non-mempool object)
509 kes First cut of converting FD .status to work with bat API.
511 .status client=XXX header
512 .status client=XXX running
513 .status client=XXX terminated
514 kes Implement first cut of Copy Job.
515 kes Implement Catalog in Pool resource. It overrides catalog specified
516 in the Client resource.
518 kes Apply patch (with some difficulties) from Joao Henrique Freitas
519 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
521 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
522 ftruncate() actually works. In the case of some (cheap) NAS devices,
523 it does not, and so recycling NAS Volumes does not work. The code
524 simply unlink()s the file, then recreates it. This fixes bug #1011.
526 kes First incomplete cut of big malloc blocks for htable.
527 kes Tweak plugin code.
529 kes Plugin debug code + tweak a couple bat dialog layouts
531 kes Fix creating first JobMedia record during Migration to include
532 proper index. This caused slow restores of migrated jobs.
533 kes Temp fix to plugin name file_index.
534 kes Bacula backed up and restored a MySQL database.
536 kes Implement plugin restore.
537 kes Implement parsing of db_driver to give db_type index.
539 kes First cut of plugin restore code.
540 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
541 and do not strip paths on symbolic links.
542 kes Set catalog backup database and user name from values specified on
543 the ./configure line.
544 ebl Fix #1031 about wrong pool source information in job report.
547 kes Remove a redundant jcr argument to find_files, match_files, and
549 kes Implement '.status dir header|scheduled|running|terminated' that
550 prints the requested status section. With the exception of the
551 header, the other reports have fields separated by tabs (\t).
553 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
554 a resource embedded run command to find a since time if no explicit
555 since time was supplied on the command line.
556 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
557 that updates the state file at job termination time in addition to
558 when the daemon terminates.
560 kes First version where a plugin did a backup.
561 bpipe-fd.so created a backup file, wrote a test
562 string to it, and Bacua could restore this fabricated file.
564 kes Implement DB Driver = string for the DBI driver.
565 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
566 kes First cut of code for loading Win32 plugin dlls. Implement
567 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
568 and implement a dlfcn.h file based on opengroup's definitions of
571 kes First cut plugin directives.
573 kes Apply patch from bug #1049 to prevent stripping the path on a
575 kes Attempt to fix bug #1047 where stripping a path corrupts the
576 heap. Waiting for feedback.
577 kes Correct the Mount message not to suggest labeling a new tape
578 when doing a restore. Submitted by email by John Stoffel.
579 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
580 FD by using casting. Reported in bug #1042.
582 kes A bit of crypto cleanup. More later.
584 Release Version 2.2.8
586 kes Apply patch from Martin to correct bug #1040, bscan sets existing
588 kes Fixed important spelling error in doc -- bug #1045.
590 ebl Fix bextract to be able to extract non-portable Win32 data to
592 kes Move initialization of read/write res lock earlier in the code.
593 This fixes the crash with a null conf file. This fixes bug
595 kes Redefine CURES in lib/parse_conf to be URES and move it all
596 into lib/parse_conf.c -- this responds to bug #1042, but does
597 not fix it. The fix is not to compile with FORTIFY_SOURCE.
598 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
599 the trunk SVN. I don't think this was reported as a bug.
601 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
603 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
605 kes Add DataDespooling and DataCommitting status (committing is
606 the last despooling).
607 kes Finish implementation of new reservations code noted below.
609 kes Fix bsnprintf for float point numbers. I broke recently when
610 parameterizing some variables. This fixes bug #1036.
611 kes Undo recent reservations changes ... will apply them later
612 when they work better.
614 ebl Fixes #1034 which cause mysql to hang the connection after 8h
615 ebl Change default statistics target of filename.name and path.path
616 fields for PostgreSQL. This speeds lookup by indexes. Thanks
618 kes A few more tweaks to new reservation code. Make sure to clear
619 vol released flag when retaking volume. When reading label and
620 label is bad mark volume unused. When recycling, mark volume
621 unused so it can be renamed.
623 kes Fix reserve_volume() so it doesn't release a volume in use
624 (i.e. a volume entry not marked released). This should be
625 the last part needed to fix bug #1018.
627 kes Move Heartbeat documentation from Job to Director resource.
628 This fixes bug #1033.
630 kes Fix existing switch drive SD code to call autochanger to release
631 any old volume. This must be done to keep the autochanger from
632 releasing subsequently newly reserved volumes in doing a close().
633 This should fix bug #1018.
634 kes Fail if attempting to get console input in batch mode. This
635 should help fail RunScript console commands that are incomplete.
636 kes First cut implementing switch_drive() in SD (not actually called).
638 kes Implement first cut running console commands in a RunScript.
640 ebl Fixes bug #1028 where 'Selection Type' option was not usable
642 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
645 Release Version 2.2.7
647 kes Add new free_tls() entry point so that Win32 builds.
648 kes Fix compile warning in src/lib/util.c
649 kes Fix entry point for edit_job_codes() so that Win32 builds.
650 kes Fix seg fault Frank Sweetser reports in regression testing
651 on his systems. The problem was that the original author of
652 bsnprintf.c did not take into account the side effects of
653 using ++x in the argument to a #define.
654 kes Make SD protocol backward compatible with version 2.2.x.
656 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
657 because Bacula no longer restores sockets.
658 ebl Always use ignorecase fileset option on win32 FD.
660 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
661 that implements double quoting include names in conf files,
662 and also allows piping input by having the first character
663 be a vertical bar (|).
664 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
665 that implement %f in RunScripts to pass the FileSet name.
666 kes Skip leading | when lex input comes from a pipe as suggested
667 by Michael Stapelberg <michael@stapelberg.de>.
669 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
670 Nerijus Baliunas <nerijus@users.sourceforge.net>
672 kes Implement Plugin Directory and plugin events.
674 kes Implement a security enhancement: TLS authentication but no
675 encryption. Enabled by setting 'TLS Authentication = yes'.
676 Note when this is on, TLS encryption is turned OFF!
678 kes This patch corrects a problem where the maximum concurrent storage
679 jobs counter gets out of sync during restore jobs causing jobs to
680 'wait on max Storage jobs'. This patch fixes bug #1009.
682 kes This patch fixes bcopy so that it produces correct Volumes.
684 kes This patch eliminates spurious output to the console during a VerifyVolume
685 job that contains encrypted data. It fixes bug #1024.
687 kes This patch prevents the 'status dir' command from trying to use a scratch
688 volume and possibly moving it from one pool to another. This patch fixes
691 kes Add new include to postgresql.c suggested by Marc Cousins so
692 that it compiles correctly with pgre version 8.3.
694 kes Fix --archivedir addition to configure. Replace it with
695 --with-archivedir in configure.in This fixes the regression
697 kes This patch fixes bug #1012 where the job is canceled because
698 of Max Run Time exceeded when the job has not yet started.
700 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
701 one 'part' to write. Instead of each part being stored on disk,
702 written to DVD, then deleted from disk, all parts are written to disk,
703 and only the last is written and deleted from disk.
704 kes This patch fixes the status command to include the formating string for
705 JS_AttrInsterting. It fixes bug #1021.
706 kes This patch should fix the Mac OS X build problem on the latest
707 Darwin, where sys/types.h was not included correctly (apparently
708 due to a change in the Mac headers). The solution was to explicitly
709 ensure that it is defined for the ./configure.
710 This patch also has a rebuild of configure that includes the Debian
711 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
712 kes This patch should ensure that queued messages to the console are
713 displayed as soon as possible. It should fix bug 1007, but has been
714 reported not to work.
716 kes This patch fixes the infinite loop when trying to increase the
717 maximum number of volumes in a Pool during the add command.
718 This patch fixes bug #1008.
720 Release Version 2.2.6
722 db Remove extra data on estimate command in joblist for bat.
724 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
725 really change anything, but is the beginning of doing it *right*.
726 To do it completely right the LastWritten date must be passed to
727 the SD, but it is not yet done.
728 kes Minor tweaks to some bat restore SQL.
729 kes This patch fixes bug #1003 where putting the message output from
730 a Verify job into the catalog results in a recursive loop. The problem
731 seems to show up only with postgresql (to be verified).
732 kes Correct %x to %p in postgresql debug statement.
734 kes Fix bug #942 where lots of emails where generated when the heartbeat
735 interval was low and Bacula wanted a different tape from the one in
738 ebl Add new SD despooling attributes and Dir inserting attributes
739 job status codes in the catalog (Status table).
741 ebl Use qmake-qt4 instead of qmake when available (debian system).
743 kes Add a security warning to src/cats/make_catalog_backup.in indicating
744 that passing the password via the command line (arg 3) is insecure.
745 This responds to bug #990 (it doesn't fix it).
747 kes Set default debug_level to zero. This corrects bugs #991 and #993.
748 kes Fix a crash in bat when it cannot connect to the Director for example
749 if the Director is not running.
750 kes Remove redundant INDEX (JobId) from File table in the trunk.
752 kes Make explicit exception to GPL in LICENSE to permit linking
753 the Win32 FD with Microsoft VSS code.
754 kes Apply the Solaris package patch from
755 Masopust, Christian <christian.masopust@siemens.com>
756 kes Apply the patch to optionally add a timestamp in the debug output
757 submitted by Mariusz Czulada <manieq@wp.eu>.
759 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
760 backend (sql_strerror). Fixes bug #989
762 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
763 It applied with no problems.
764 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
766 kes Redirect stderror to stdin on mt status command in mtx-changer.in
767 since the status is returned on stderr on Solaris.
768 kes Activate Close button on tray-monitor window. This fixes
770 kes Check for NULL item in parse_conf.c before calling it. In the
771 case of Device, there is no item and this caused a seg fault when
772 Device appears in the conf file.
773 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
774 avoids pulling in config.h multiple times in some new code.
776 kes Fix spurious warning message printed when creating a volume with
777 a LabelFormat. This fixes bug #976.
779 Release Version 2.2.5
781 kes Add JobId in place of Job name in all the Jmsg() output.
782 kes Correct the APP_DESC for the Win32 storage service (remove an e).
784 kes Make maxvol-test and new more strict maxvol2-test work.
785 kes Print JobId in all Jmsg() job output.
787 kes Add new SD despooling attributes and Dir inserting attributes
788 job status codes. This fixes bug 961.
789 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
791 kes Fix doc issue. This fixes bug #963.
792 kes Fix listing performance problems in bat. Pointed out by
794 kes Remove old debug code.
795 kes Fix bat code that tests for Win32. This should fix bug #968
796 kes Query 5 list wrong Vol after migration. This fixes bug #960
798 ebl Fix #969 where user can't change Replace option in restore menu.
800 kes Save jcr in thread specific data (tsd) for each thread.
801 kes Make Dmsg() print JobId as -%u.
802 kes Make Jmsg, Emsg, and others automatically pickup the jobid
803 for the thread if it exists.
804 kes Remove old reservation debug jid code.
805 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
806 ebl Add an option that permit to specify spool size in job
807 definition. (Applying patches/testing/spoolsize_per_job.patch).
808 You must upgrade SD and DIR at the same time.
809 dvl Add new configuration item --archivedir
810 dvl Adjust regression tests to use tmp not /tmp. This will allow
811 multiple concurrent runs of the regression tests.
813 kes Fix race condition that drops final block written to volume.
814 This happens in rare cases with multiple simultaneous jobs
815 when the Volume fills. This fixes bug #964. May be related
816 to bug #935 and possibly #903.
817 kes Eliminate more strerror() and replace with bstrerror().
818 kes Remove BSD getopt and replace with unrestricted IBM version.
819 kes Fix Win32 build for changed calling sequences.
820 kes More tweaks to the mount volume routines to get everything
821 right. Changed variable name from find to have_vol, which is
822 much easier to understand.
823 kes Enhance btimer debug code.
825 kes Fix FD->SD authorization failure, which was due to spurious
826 wakeups from a pthread_cond_timedwait(). Simply check the
827 predicate before continuing. This fixes bug #953.
828 kes Add const char where needed (more to do). Remove temp debug code.
830 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
831 kes Don't overwrite error message in check_tables_version.
833 kes Unlock batch insert tables with same calls used elsewhere.
834 kes Allow starting 59 jobs a second.
835 kes Make SD session key more random.
836 kes Add retry for SQLite opening db if it fails. Probably helps
838 kes Suppress extra error messages during batch insert failure.
840 kes Add jcr to timer packets so if killed message can be sent to job.
841 kes Add JobId to all Dmsg() output.
842 kes Put some FD auth code on dbglvl rather than fixed.
843 kes Return insert attributes error message in db msg buffer to avoid
844 false error messages. Helps fix bug #966.
845 kes Separate batch init error messages. Probably helps fix bug #966.
846 kes Make SD code that contructs attribute insert check string lengths
848 kes If Dir gets an error during inserting attributes, cancel SD.
849 This reduces unnecessary error messages.
851 kes Correct search boolean for getting Volume info
852 ebl Cleanup batch insert code. Probably fixes bug #965.
853 kes Back out one small change to the reservation system (reserving a volume).
854 kes Rework how a Volume is mounted. It is now much more intelligent and
855 will always attempt to use any mounted volume if possible and reduces
856 calls to the Director asking about volumes.
858 kes Turn off some code when batch insert not enabled.
859 kes Edit FD name in connect error messages.
860 kes Rework the reservation system to take into account that the Director
861 might give us a Volume that is different from the current one being
862 used, and to ensure that we don't exceed Maximum Volume Jobs.
863 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
864 fatal error with multiple jobs running'
865 kes Add more debug code in reservation system.
866 kes Implement maxvol-test to check bug #947.
868 kes Add code to handle tray monitor separated from Win32 FD.
869 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
871 kes Add missed return in fixing verify bug -- trunk only.
872 ebl Fix a command parser issue causing a director segfault.
873 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
875 kes Increase the max block size to 4MB fixes bug #957.
876 kes ERABT if user sets min block size > max block size. Fixes bug #956.
877 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
878 is not properly mounted (recognized) during a poll.
879 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
880 Job that has differences reports Verify OK.
881 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
883 ebl Add an option to operate on all pools with update vol parameters.
884 This complete the project 20. Patch from Nigel Stepp.
885 ebl Add history support to bconsole when using readline.
886 Using Ctrl-D to exit doesn't update .bconsole_history
887 kes Modify new volume algorithm to use max MediaId for generating next
888 volume number rather than the count of Volumes. This should essentially
889 eliminate the failure rate if some volumes were deleted. Bug #921.
890 kes Begin implemention of Optimize Job Scheduling.
891 kes Implement restore callback that Dirk and I agreed on for bat
892 restore. This fixes bug #928. Restore of backup of zero files fails.
893 kes Fix SQL Catalog logging which broke with new db_escape_string
896 Release Version 2.2.4
898 kes Fix bacula_cats.def for new db_escape_string().
899 kes Increase size of name string when FD making connection to SD.
900 May fix bug #953. FD->SD connection failure.
902 kes Add code to help Dan debug 2drive-incremental-2disk test.
903 kes Add code to try to fix bug #908.
904 kes Add waits to multiple exit detection code to try to force pid
905 file to always be deleted.
906 kes Restore good dev.tar.gz to rescue set appropriate binary property.
908 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
909 trying to switch drives by checking for blocking before unblocking.
911 kes Cancel storage daemon in all cases where FD reports error. This
912 should fix virtually all cases of bug #920.
913 kes Fix db_escape_string() for MySQL which did not compile.
915 kes Fix error message that was clobbered when Dir tells SD it does not
916 have write permission on Volume. This should fix a minor point
917 in bug #942, but not the main problem.
918 kes Add code to cancel job in SD if FD connection fails. This should
920 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
921 dvl Pass jcr and db into db_escape_string() to enable better escaping
923 kes Fix migration code to get correct Volume name with multiple volumes
924 by skipping |. Fixes bug #936.
925 kes Implement patch supplied by Landon to fix bug #944 where using
926 TLS with bconsole uses 99+% of the CPU.
927 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
929 kes Move patches into patches directory.
931 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
934 ebl Using 'm' in bconsole will show messages like before,
935 and not memory usage.
936 kes Fix bug #935, and probably also bug #903 where files were not
937 restored. MediaId was not properly set in JobMedia record after
940 kes Suppress chown and chmod error messages if the FD is not running
943 kes Apply Martin Simmons' patch that should turn off the new API usage
944 when batch insert is turned off allowing building on older
946 kes Add ./configure search in qwt-qt4 for qwt package
948 kes Bacula is now free of 3rd party GPL copyrighted code!
950 kes Add guid_to_name.c/h which replace idcache.
951 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
953 ebl Detect if new PosgreSQL batch insert API is present.
954 kes Correct incorrect mempool call causing Director crash. Occurs on
955 systems without va_copy().
956 sb Update spec files for 2.2.1 release
958 kes Fix memory pool call in ua_output.c. bug #934.
959 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
960 Add test program to fnmatch.c
962 kes Integrate patch to README.vc8 from
963 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
964 edit it to get it into Unix patch format.
965 kes Implement mkpath.c to replace old FSF makepath.c
967 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
969 Release Version 2.2.1
971 kes Update POTFILES.in
972 kes Cleanup a few underquoted AC_DEFUNs in configure
973 kes Apply patch from Martin Simmons that adds a test for va_copy to
976 kes Fix bug #921 by increasing the number of tries to create a new volume
978 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
979 can be called multiple times. Implement a version for machines
980 without va_copy() that gets a big buffer.
982 kes Integrate more portable zone offset code into bsmtp.c
983 Submitted by Attila Fülöp.
985 kes Fix bad SD->FD return status reported by
986 (James Harper) <james.harper@bendigoit.com.au>
987 ebl Fix a bug in read_close_session which return random status
988 thanks to James Harper
990 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
991 and directory names during restore of single file/directories.
992 kes Add sanity checks to .sql command when string is empty. Hopefully
993 that will resolve Dirks Director crash.
995 kes Apply patch submitted by Martin Simmons that corrects a seg fault
996 in the bsmtp chat subroutine when debug is >= 10.
998 kes Fix Director crash when running bat SQL queries.
999 kes Add David's notes on Item 8: Copy pools.
1001 kes Rework projects file to be current and ready for a vote.
1002 kes Enhance lex scanner error message.
1004 kes Tweak LICENSE file to mention BSD code.
1005 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1006 if specified on the ./configure.
1007 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1008 This class is intended to allow us to open a second bsock to the
1009 Director while in the restore subdialog.
1011 kes Fix configure to create bat Makefile before creating dependencies.
1012 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1013 kes Add a tooltip to the tray monitor.
1014 dvl Set the Director's PID file before dropping privs. This fixes
1017 kes Update AUTHORs file
1018 kes Increase the default max concurrent jobs to 20 in FD and SD to
1019 correspond with the default .conf files.
1020 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1021 some different, of the same file created by RN when porting the
1023 kes Rearrange some of the Win32 directories and the placement of the files
1025 kes Set DEVELOPER flag in version.h
1027 ========================================================================
1028 Release Version 2.2.0
1030 kes Apply a second doc patch from Marc.
1031 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1032 improves the tips section that discusses how to setup multiple
1035 kes Update bat README file.
1036 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1037 corrects a typo in the Recycle status check in db_find_next_volume().
1038 This will probably fix a number of annoying problems with multiple
1040 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1041 bnet calls -- no functionality change.
1043 kes Modify the Verify output to specify if files are missing on
1044 the Volume(s) or disk. Fixes confusion in bug #916.
1045 kes When more than one Volume is read in a migration job, the last
1046 Volume bytes reported are from the last read volume rather than
1047 the last written volume. Fixed. This fixes bug #910.
1048 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1049 It previously printed New Recyle flag is: no. This fixes bug
1052 kes Correct seg fault when switching tape drives during restore.
1053 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1054 be used until after 2.2.0 release.
1056 kes Remove fnmatch() in SD that permitted wild card specifications.
1057 This fixes bug #914.
1059 kes Fix %g in filename returned by SQL for browse tree reported by
1061 kes Fix configure so that it puts config.out in the cwd rather than
1063 kes Attempt to fix the locking problem reported by Eric in bug #906.
1064 kes Make berrno class to leave errno unchanged after constructor call.
1065 kes Make bnet_server use the heap rather than the stack to allocate
1066 its socket fd pointers to avoid a crash at termination. Problem
1067 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1069 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1070 and putting it in depkgs-qt along with Qt4.3.
1072 kes Rework code in acquire.c that switches drives for reading when
1073 the Media Type does not match. This should fix bug #906
1075 ebl Fix a director segfault during job setup #907
1076 kes Correct seg fault in postgresql when first operation returns no
1077 rows. Fixes Dirks File browser problem seg fault with bat.
1079 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1080 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1083 kes Implement PopUp YES/NO dialog for bat.
1085 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1087 kes Correct RunScript to terminate job in FD on failure.
1088 kes Change abort_on_error and AbortJobOnError to fail_on_error
1089 and FailJobOnError in RunScripts.
1090 kes Minor tweaks of code formating in RunScripts, principally to
1091 avoid depassing 80 columns.
1093 kes Eliminate one #ifdef Win32 in bsmtp
1094 kes Implement grow tool to grow a file for testing very large databases.
1095 kes Add big-vol-test to test Bacula seeking with > 5GB.
1098 kes Modify find_next_volume() to return all values in Media record.
1099 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1103 kes Update Release notes
1105 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1106 Warning, in previous beta version, all media get from scratch keep their
1109 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1110 This should fix bug #842. Made a note to look at removing the temp
1111 files at the end of the install.
1112 kes Add ability to mount and unmount a file device providing it is
1113 marked as being removable and has the appropriate mount and unmount
1114 commands defined in the Device resource. This fixes bug #830.
1115 kes When applying a storage override, release all previous storage
1116 definitions rather than just prepending the new storage.
1117 This should prevent a good deal of confusion.
1119 kes Implement ./configure search for qwt libraries.
1121 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1122 Win32 FD. This should fix bug #893.
1123 kes Remove an unnecessary beep in Win32 init code.
1124 kes Update copyright dates in Win32 executable about boxes.
1125 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1126 code with a BSD getopt.c and getopt.h.
1127 kes Remove sched.h from the Win32 compat directory -- not used.
1128 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1129 need to shut it down, do it through the services panel or the command
1131 kes Remove some inappropriate Bacula FSFE copyrights.
1132 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1133 kes Fix regress config non-portable test as pointed out by
1134 Florian Heigl <florian.heigl@gmail.com>
1135 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1136 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1138 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1139 Reported by Frank Sweetser.
1143 kes Fix client-only build.
1144 kes Integrate client-only fixes for bsys (initgroups) and conio from
1145 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1146 kes Make arguments to get_scratch_volume() in same order as other
1148 kes Rework the prune_volumes() subroutine so that after purging and
1149 no volume found in desired pool, it will check for a scratch
1150 volume. This prevents recycling the whole scratch pool.
1151 kes Add code to status storage to print boffset_t (largefile support).
1153 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1154 kes You now need a --with-qwt=<dir> to be able to build bat.
1155 kes Update src/win32/cats/bacula_cats.def to include the new
1156 db_get_query_dbids() call on Win32.
1158 kes Correct a problem when selecting a scratch volume and moving
1159 it to another pool that lost some columns.
1160 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1161 kes Enhance Autochanger error messages to include Volume and device name.
1162 kes Rework prune_volumes() code to take account of InChanger flag,
1163 and to handle recycling volumes going to the Scratch pool and
1164 current pool because the RecyclePool directive.
1165 kes Implement a better and more efficient db_get_query_dbids() to
1166 handle creating and passing back a list of DBIds.
1170 kes Start work on new more efficient DBId subroutine. First use
1171 will be for recycling volume to Scratch inchanger.
1172 kes Increase number of JobIds in pruning from 1000 to 10000.
1173 This to be replaced by above routine.
1174 kes Begin implementation of building Qt4 on Win32.
1175 kes Correct typo in fix I added for bad TLS shutdown.
1176 kes Pull 2.0.3 patches into patches directory.
1177 kes Update Release notes. Include qt-console in line count.
1178 kes Update Projects file.
1180 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1181 bug in migration code where a job that spanned two volumes
1184 kes Implement new BST_DESPOOLING blocked state. Change from locking
1185 during despooling in SD to blocking. This means that other threads
1186 can work with the device structure, in particular the reservations
1187 system while despooling.
1189 kes Fix return in reservation message queue that missed clearing
1190 the jcr lock (implemented 26Jun07 below).
1191 kes Rename a number of dev methods to make locking function names
1193 kes Document locking in lock.c. Move lock structures to new file
1196 kes Move reservations message lock to lock jcr only this
1198 kes Move main SD locking code into lock.c (new file).
1199 kes Update Win32 build to include lock.c
1203 kes Dirk committed the qwt library code for drawing graphs in bat.
1204 kes Tweak install of qwt so that it is integrated with ./configure.
1206 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1207 out by Eric (my typo).
1208 ebl Fix configure.in to get batch mode enable
1209 kes Return correct string from authenticate.cpp in bat when connecting
1211 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1212 spurious line drops when using TLS.
1213 kes Do not file reparse points when restoring a file that already
1216 kes Implement Windows reparse points -- similar to directories, but
1217 we do not descend into it. This is a first cut. They seem to
1218 be backed up, but restore is not yet tested.
1219 kes Remove restore_blocking in tls code when shutting a socket to leave
1220 it in blocking mode. Hopefully this will fix the encryption bug
1221 reported by Frank Sweetser.
1222 kes When opening a file for backup, tell the OS that we are going to
1223 read it sequentially -- optimization.
1224 kes Change variable names in authenticate_director() to not conflict
1225 with member names in bat. Caused great confusion with compiler,
1228 kes Queue openssl error messages in case of comm problem.
1229 kes Do shutdown() call if socket terminated.
1230 kes Remove some duplicated code in tls.c
1231 kes Move more of the bsock member variables into private and access
1233 kes Add Frank Sweetser's tls-test to the regression suite.
1235 kes Add Swedish sv.po file
1237 kes Don't print clock skew message in FD if less than 3 seconds diff.
1238 kes Add a bit of VSS info to status client.
1239 kes Implement a first cut of Vista VSS, using Win2003 code.
1241 Release: 2.1.20 beta
1243 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1244 loaded tape but uses first drive).
1245 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1246 This was indeed a Win32 issue.
1248 kes Simplify search of autochanger for in-use Volume.
1249 kes Fix exit condition of check for in-use volume. kes Remove
1250 inappropriate my_postgresql_free_result() in db_close()
1252 kes Fix bad return in FD when encryption signature not found.
1253 Probably caused a crash.
1254 kes Inhibit missing encryption signature error messages for
1255 file types where no signature computed.
1256 kes Correct inverted check on autochanger in reservation system.
1257 kes Tweak debug code in autochanger reservation.
1259 kes Add some additional locking in the cats directory in subroutines
1260 that modify packet variables called from batch insert.
1261 kes Rework how dcrs are allocated. new_dcr() can now be called
1262 with an existing pointer, and it will simply clean it up.
1263 This allows the reservation system to test various different
1264 devices, and will permit easy device changes.
1265 kes A bunch of changes all over to handle new new_dcr() calling
1267 kes Work more on the Volume management in the SD. Remember Volumes
1268 for tape drives and for autochangers (even virtual disk changers).
1269 kes When looking at the Volume list to reserve a drive, handle
1270 autochanger names correctly by interating through the changer
1271 devices. Also call the Director to see if a Volume is suitable
1272 for the current job.
1273 kes Fix some bugs in bscan. Make sure all media records are written.
1274 Make sure that valid JobMedia records are written for disk files.
1275 Previously they were completely wrong.
1276 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1277 that the URLs don't change and so that the developers will all
1278 work off the same copy. Rebuild from scrach.
1279 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1281 Release: 2.1.18 beta
1283 kes Fix seg fault in FD from incorrect digest size.
1284 kes Fix argument to non-OpenSSL crypto.c subroutine.
1286 Release: 2.1.16 beta
1288 kes Remove a few malloc()s from the encryption code.
1289 kes Use the class calls to bsock in filed/backup.c and restore.c in
1290 place of the old bnet_xxx code.
1291 kes Implement code that does an on the fly calculation of the
1292 signing digest during restore of encrypted files. It makes
1293 a best guess at the algorithm, and if it is not correct, will
1294 then revert to the old code which reads the file after it is
1296 kes Implement at least one missing crypto stream in stream_to_ascii()
1297 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1298 #877 where a reload with bad syntax causes Dir to exit.
1300 Cut: 2.1.14 beta (not released)
1302 kes Do not free a volume on a tape drive until another volume is
1303 mounted and read, or the autochanger unloads the volume.
1304 This should help the SD re-use volumes that are already mounted,
1305 and should fix bug #886.
1306 kes Apply patch from user brettedgar that allows gnome2-console include
1307 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1308 kes Apply patch from Lucien Weller that fixes day of week calculation
1309 because of DST flag problem. Fixes bug #887.
1311 kes Move find_next_appendable_volume() to after acquiring a valid device
1312 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1314 kes Unable to reproduce bug 872. However added additional testing for
1316 kes Bug #874 resolved by documenting SQLite limitations.
1317 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1318 kes Bug #881 resolved by removing typo in mtx-changer script.
1319 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1320 approval. Added a link to the wiki on the web page, and implemented
1321 a backup from http://paramount.ind.wpi.edu
1323 kes Fix update allfrompool to pass pool name.
1325 kes Convert to pure GPL v2 license.
1326 kes Fix sscanf problems reported by Peter Buschman that caused
1327 a bus error on Solaris.
1328 kes Rework (simplify) the select prompt in bat.
1329 kes Move get_jobid_from_tid() into lib and create a
1331 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1332 should definitely fix the problem of lost error messages in the
1334 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1335 kes Eliminate tcpd.h from the project. Enclose the #include from the
1336 library with extern C ...
1337 kes Add print of signal name when a signal is trapped.
1339 Release: 2.1.12 beta
1341 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1343 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1344 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1345 makes SQLit3 run 30 times faster, though a bit less safe.
1346 kes Implement --with-batch-insert in configure and detection of thread
1347 safe libraries. It is on by default, but turned off if no thread
1348 safe library (e.g. SQLite 2) is available.
1350 kes Fix Bacula PostgreSQL buffer overruns.
1351 kes Do better checking for NULL results returned from PostgreSQL;
1352 implement retry for failed queries; clear results buffer after
1353 failed query. Hopefully this will correct the PostgreSQL failures.
1355 kes Implement algorithm to handle only one appendable volume with
1356 Prefer Mounted Volumes = no.
1357 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1358 returned from a query.
1359 kes Make volume lock recursive.
1360 kes Implement an additional volume reservation algorithm that
1361 starts by considering all reserved volumes then uses the
1362 old brute force algorithm of searching the resources to
1363 find a suitable device.
1364 kes Add new reservations debug code and refine the old code.
1365 kes Update the win32/dll/bacula.defs file.
1367 kes Tweak reservations algorithm to permit a few more cases, i.e.
1368 volume reserved, but on different drive, ...
1369 kes Enhance SD status to include Pool and Media Type for drive in a
1370 more readable format (a bit longer).
1371 kes Fix PostgreSQL double free.
1373 kes Minor refactoring of restore decryption code.
1374 kes Add code to smartall.c to detect double free of a buffer.
1376 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1377 so that bsmtp will create a correct email address (mailbox only).
1378 kes Modify 'memory' command so that the buffers are listed as 'In use'
1379 to avoid confusion with Orphaned buffers.
1380 kes I reworked the OpenSSL include/lib flags to be handled in
1381 the standard Bacula way, which should fix bug #863 concerning
1382 non-standard OpenSSL libraries.
1384 kes Implement Help Browser window for bat.
1385 kes Fix reload bug that reset StorageId to zero.
1387 kes Fix TLS #ifdefing when TLS turned off.
1388 kes Ensure that when labelling a tape with Slot=0 that InChanger
1390 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1392 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1393 add DISTINCT (required by PostgreSQL).
1394 kes Implement BSOCK authenticate_director() method. Eventually will
1395 authenicate all daemons.
1396 kes Move several more functions into the BSOCK class.
1398 kes Add code to tell the OS that we no longer need a cached
1399 file that we were reading. In findlib/bfile.c. Also,
1400 only cache files that we are reading. Thanks to
1401 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1402 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1403 kes Implement script to automatically generate cats and dll .def
1404 files for Win32 dll.
1405 kes Update README.mingw32 to include new .def file generation.
1406 kes Correct typo in UTF-8 error message as reported by:
1407 jhernandez <julianhernandez@gmail.com>
1408 kes Add additional sm_check() code on debug level 1.
1409 kes Set default debug level to 1.
1410 kes Trap SIGABRT in attempt to get traceback.
1412 kes Reduce bat connect timeout from 30 to 15 seconds.
1413 kes More restructuring and implementing BSOCK class in place of
1415 kes Remove a few unnecessary malloc() tests in crypto code.
1416 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1417 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1418 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1420 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1422 kes Fix Verify InitCatalog. The attributes were not pointing to the
1423 correct saved location.
1424 kes Implement message callback so that GUI is sure to get all
1425 daemon messages. Currently displayed in a dialog in bat.
1426 kes Ignore SIGUSR2 (Bacula timer) in bat.
1427 kes Apply regress patch from bug #859 to allow regress to work
1428 with Solaris compiler.
1430 kes Begin adding TLS support to bat.
1431 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1432 clean up lex.c and make it more readable.
1434 kes Move more bnet functions into the BSOCK class.
1435 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1436 kes Complete change of berrno strerror() method to bstrerror()
1438 Release: 2.1.10 beta
1440 kes Cleanup incorrect email addresses in bsmtp.
1441 kes Make bat display initial messages rather than discard them.
1443 kes First cut of adding .mod to the run command.
1444 kes Implement auto display of messages in bat.
1445 kes Enhanced preferences to allow all Bacula output to be
1448 kes Try to make bsmtp date routines more generic.
1449 kes Fixed bug #856 autochanger documentation.
1450 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1451 kes Add new cats entry point so Win32 builds.
1453 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1455 kes Do better checking for the MySQL 64 bit libraries looking for both
1456 .a and .so libraries.
1457 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1458 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1459 kes Require the thread safe version of MySQL during configure. Thanks
1460 to Andre Noll for pointing this out.
1461 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1462 continuing in migration code.
1463 kes Apply implementation of tray-monitor font derived from gnome-console
1464 submitted by Andreas Piesk <a.piesk@gmx.net>
1466 kes Eliminate important memory loss in SQLite
1467 kes Fixed the batch insert MySQL thread specific data that was not
1468 being freed. See cats/mysql.c:db_thread_cleanup().
1469 kes Fix restore before command.
1470 kes Convert old hdr.name to name() in a few places.
1471 kes Implement update jobid command.
1472 kes Return all time_t dates in db_get_job_record()
1473 kes Stop watchdog in SD earlier.
1474 kes Put Pool just after Storage in please mount message.
1475 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1478 kes Update the po files.
1479 kes Fix Verify InitCatalog by making it cache attributes.
1481 kes Change name bacula-bat to bat for man 1 page to correspond to
1483 kes Check for client and store NULL pointers in status command. This
1485 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1486 kes Fix sign extended editing of %p.
1487 kes Clean out a little old #ifdefing in cats/mysql.c
1489 kes If time diff between DIR and FD is more than 600 seconds convert
1490 INFO message to WARNING.
1491 kes Implement heap size display in status for all daemons.
1492 kes Attempt to fix MySQL db open memory loss (not successfull).
1493 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1494 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1495 Query. This looks like a MySQL but but by doing extra releases,
1496 the memory goes away. This should fix bug #847.
1498 kes When backup fails, cancel SD before waiting for sd termination.
1499 kes If SD is waiting for FD to connect during cancel, wake up the
1501 kes Fix fsf code so that errno is correctly reported.
1502 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1504 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1505 so that Bacula doesn't later stumble into a seg fault.
1506 kes Use the term Restore Client in the restore Job report.
1507 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1508 the original job's FileSetId.
1509 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1510 spooling in migration jobs. Not yet tested.
1511 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1512 reading conf file from a pipe. However, do it with open_bpipe()
1513 rather than popen. Not yet tested.
1515 kes Fix an ugly bug where the VolCatBytes were getting updated
1517 kes Implement bconsole memory command that prints current memory
1518 usage, plus smartalloc dump.
1519 kes Clarify some error messages in backup, admin, and migrate.
1520 kes Shrink label dialog to smaller size.
1521 kes Invert Cancel OK buttons on restore to be OK Cancel.
1522 kes More strerror() to bstrerror() conversions.
1524 kes Start implementing bstrerror() in place of strerror().
1525 kes Stripping path -- seems to work.
1527 kes Prevent door and port files from being restored (mostly
1529 kes Free an unreleased buffer in compat code.
1530 kes Change console Job name from *Console* to -Console- to eliminate
1531 Win32 filename problems. Put Win32 path separator when creating
1532 Console file. This fixes bug #846.
1533 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1535 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1537 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1538 to force Win32 error message.
1540 kes First cut strip path. The data should be passed to the FD,
1541 but nothing is done with it yet.
1542 kes Enhance the digest and signature routines in the crypto
1543 library to accept a JCR and to use it to print error messages
1544 so that they will go in the Job report rather than the daemon's
1546 kes Simplify some of the verify signature code.
1547 kes Simplify a few of the alternative returns in the signature
1550 ebl Use only POSIX regex instead of GNU regex in breg.c for
1551 File relocation. It fix broken freebsd compilation.
1552 kes Convert all other Dir files to use new ua class message
1554 kes Tentative fix for missing digest signature in bug 807.
1555 kes Correct handle problem in new win32_ftruncate routine.
1556 kes Convert ua_purge.c and ua_update.c to use new ua class
1557 message routines for bat.
1559 kes Correct incorrect installation of LICENSE in Win32 installer.
1560 kes Display LICENSE at the beginning of the Win32 install.
1561 kes Attempt to correct the need for the png files to be installed
1563 kes Reapply my bat.conf install script in qt-console. I think I
1564 editted bat.pro instead of bat.pro.in and it was lost.
1565 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1566 the /var/lock/subsys for subsysdir. Also corrects typos in the
1569 kes First cut update job.
1570 kes Correct configure to include qmake of src/qt-console directory.
1572 kes Make restore job yes/mod/no print in one command so GUI works.
1573 kes First cut implementing backup and restore client.
1574 kes Correct editing in Verify output that caused a seg fault.
1576 kes Insure that bat.conf is not overwritten during installation.
1577 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1578 while I was implementing migration in March 2006 !
1580 ebl Cleanup file relocation, using char *RegexWhere instead of
1581 char *where + bool where_use_regexp
1582 kes Update some manpages and add bat manpage.
1583 kes Make a first cut at converting bacula.spec.in for bwx-console
1585 kes Apply patch from John Goerzen to add hostname as fourth argument
1586 to make_catalog_backup script.
1587 kes Fix typos I introduced into bsmtp.c
1588 kes Make pm_strxxx() routines handle input of NULL pointer. This
1589 is to protect from NULL pointers returned from SQL databases.
1590 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1591 kes Add more debug to FIFO code -- fix fifo regression test.
1593 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1594 kes Add thread timer to bnet_connect() to break from OS if wait time
1597 kes Update Win32 build to include new files, new symbols, and
1599 kes Implement socket level heartbeat (tcp_keepidle)
1600 ebl Commit File relocation patch
1601 kes Make bat have 'make install' target.
1602 kes Warn during install if old gnome-console binary found.
1603 kes Warn during install if old wx-console binary found.
1604 kes Add -8 option to bsmtp command line to add content type utf-8.
1605 Fixes bug #809. (Character coding problem in bsmtp).
1606 kes If < is found in target (from, to, cc) then do not enclose the
1607 target in < > in bsmtp. Fixes bug #772 (malformed address).
1608 kes When printing certain items in dbcheck, stop after 300000.
1609 Fixes bug #822. (dbcheck loops).
1610 kes Incorrect status in Dir after waiting for mount with poll set.
1613 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1615 kes Print waiting to reserve a device every 5 mins.
1617 kes Don't call close_part in label.c if tape and relabel.
1618 kes Don't free volume if busy in close() -- should help with
1620 ebl Fix #824 RunScript bug (After script could be execute twice)
1621 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1622 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1623 Add a regression script to test RunScript
1625 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1628 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1629 deprecated. No additional bugs will be fixed, and they will be dropped
1630 in a future release (probably 2.4.0).
1631 kes Change name of wx-console to bwx-console to make it more Bacula
1633 kes Change the name of gnome-console to bgnome-console to make it
1636 kes Some time in March, a Feature Request with patch from Jorj Bauer
1637 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1639 The ability for the director to validate a Client (FD) CN against
1640 an arbitrary set of patterns rather than the hostname, with
1641 A new 'TLS Allowed CN' set of directives which are implemented
1642 in the Client resource. Then pattern matching is used in place
1643 of hostname matching against the Certificate's CN. As an example, we
1644 have certificates which (a) use a local CA, and (b) have a CN of the
1646 kes Add new/changed entry points to Win32 build
1647 kes Create unaccepted-projects for projects that are not accepted.
1648 kes Simplify locking in the reservations system.
1649 kes Add more debug code in reservations.
1650 kes Make sure error condition on reserving a volume is handled correctly.
1651 kes Correct handling of volume_in_use.
1652 kes Correct handling of initializing a device.
1653 kes Move handling of broadcasting releasing a device into release_device().
1654 kes Correct attaching dcr to dev so that it is only done if device
1655 is properly initiated.
1657 kes Locking debug level tweaks in SD.
1658 kes Tweak new Volume code.
1660 kes Add exec external-command [wait-seconds] to bconsole. This
1661 executes the external-command. Note! normally external-command
1662 should be enclosed in double quotes.
1663 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1664 it should normally be off in a production system.
1666 kes Implement die command for SD so that we can force it to dump.
1667 kes Implement SD lock debug code.
1668 kes Implement new algorithm for keeping Volume list in SD. It
1669 is now owned by the device.
1671 kes Implement new code for freeing in use volumes that should
1672 resolve if not all, some of the problems of multiple drive
1673 tape conflicts described in bug 801.
1675 kes Fix gui/bacula-web/images files in svn.
1676 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1678 ebl Fix a bug in batch mode (in string escape)
1679 kes Correct migration prune SQL typo that crept in in a
1680 recent 2.1.x change.
1682 kes Move bnet_despool() into class in bsock.c
1683 kes Modify job report to include director name and Build OS.
1684 kes Move drop root privilege and check_catalog() before fork.
1685 kes Add update database scripts (version 9 to 10) to updatedb directory.
1687 ebl Check size and age of each file after its backup to see if
1688 it has changed during backup, if 'checkfilechanges' is set.
1689 The FD will do an extra check (stat(2)) after
1690 each file backup. mtime, ctime and size are compared with
1691 'before backup' information. If time or size mismatch, an
1692 error message will be generated. You must upgrade FD to use it.
1694 kes Make database name and user configurable
1695 --with-db-name=xxx --with-db-user=xxx
1696 kes Add back database type to message.c for debugging.
1698 kes Implement dir_sql() which issues an SQL query.
1699 kes Modify bat medialist to use dir_sql() and do some minor C++
1700 formatting as well as eliminating a number of pointers, simplifing
1703 kes Fix some of the mtx-changer grep commands for tape label readers.
1704 kes Convert a number of bsendmsg into the appropriate send/warning/error
1705 message class calls.
1706 kes Suppress the using database message in the .sql command.
1707 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1709 kes Add context menu for floating a window.
1710 kes Some minor cleanup and name changes in qt-console
1711 kes Add doing mt setblk 0 in Win32 mtx-changer.
1712 kes Apply Martin's bug fix to move definition of ENODATA for
1714 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1715 sqlite2 and sqlite3.
1717 kes More pruning cleanup.
1718 kes Turn on wait_for_drive by default in mtx-changer.
1719 kes Turn on Batch insert code by default as it now passes regression.
1720 kes Add ./configure --enable-bat to enable building of Bat.
1721 No install yet though.
1723 kes Implement a new .sql command for bat.
1724 kes Implement code to turn off pruning in obtaining the next volume.
1725 Pruning is turned off for the status dir command, but turned on
1726 for SD requests and for the list nextvolume command.
1728 kes Correct Qmsg() that was not updated correctly when committing a
1729 previous change (probably the recent TLS patch).
1731 kes Write new subroutine is_volume_purged() that explicitly checks
1732 if the Volume is purged, and if so marks it as such. This should
1733 resolve problems reported about needing to mount twice to recycle
1735 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1736 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1737 amount of duplicated code.
1738 kes Do volume pruning only for the Media Type desired (reduces pruning time
1739 if multiple Media Types are in the same pool).
1740 kes Implement more detailed info in the Job report for the Bacula version
1742 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1744 ebl Add bbatch tool to bench database and insert mode.
1745 Fix sql quote stuff in batch mode
1746 Fix sql stuff for mysql
1748 kes Correct problems with am/pm scheduling. Fixes bug #808.
1749 kes Implement new prunning code that prunes up to 1000 jobs at
1750 the same time. The same technique can be applied to a number
1751 of other prune/purge subroutines.
1752 kes Add an insanity check when starting a new tape job to ensure
1753 that the tape position has not been changed. If so fail the
1755 kes Fix Win32 build for dlls to add the folllowing:
1756 src/lib/bsock.c -- new file with new entry points
1757 src/lib/dlist.c -- new entry points
1758 src/cats/sql_create.c -- new entry point
1759 src/cats/sql_cmds.c -- new DATA item exported
1761 ebl batch mode cleanup bscan-test is ok now.
1762 kes Implement SD code to check length of disk volume before appending.
1764 kes Correct return status on db_batch... routines.
1765 kes Add call to db_write_batch_file_records() to migration code.
1766 ebl Fix AfterJob timing
1767 kes Move the checking of the database in initializion of the Director
1768 to after we drop privileges. This avoids the need for both root
1769 and bacula access to the DB.
1770 kes Correct a misplaced variable definition in src/filed/backup.c
1771 kes Correct how the new batch insert db_create_attributes_record()
1772 uses the arguments. Caused a seg fault in bscan.
1773 kes Implement lock() and unlock() methods in DEVICE class.
1774 Implement block() and set_block(xx) methods in DEVICE class.
1775 kes Modify bnet_connect() so that it uses time() to check for the
1776 wait time expiring (on some OSes, some system calls may not
1777 return immediately).
1778 kes Modify Verify to obtain the previous JobId when it is actually
1779 running rather than at schedule time (as it was in 1.38.x).
1780 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1782 kes When checking pid in pid file, continue running if the pid is
1783 the same as ours. This occurs on IRIX after a system crash.
1786 kes Extend new GUI API.
1787 kes Make the ua structure a class, and implement send_msg(),
1788 error_msg(), warning_msg(), and info_msg().
1790 kes Apply fix from for building wx-console on the Mac from
1792 kes Implement new select mechanism for GUI programs.
1793 kes Reorganize initialization of stackedWidgets in bat.
1795 kes Add updated nagios plugin supplied by Christian Masopust.
1797 kes More bat implementation.
1798 kes File migrate bug with Pool Occupancy using mediaid instead
1799 of jobids. Fixes bug #795.
1800 kes Fix orphaned buffers in filed backup and verify due to
1801 crypto buffers not freed during errors. Fixes bug #789.
1802 kes Extend new GUI api code to tree commands.
1803 kes Ensure that tree and dot commands check console ACLs.
1804 kes Permit marking directory with trailing slash.
1805 kes Allow 20 console connections (instead of only 10).
1807 kes Add smartctl call to bacula-sd.conf as an example of getting
1810 kes Modify jobq.c to let simultaneous restore jobs run. This may
1811 cause them to fail if they cannot get a drive.
1812 kes Add Client Connect Wait to Storage daemon to permit users to
1813 modify the time the SD waits for a FD connection.
1815 kes Correct virtual changer check which was backwards. This caused
1816 volumes to be unloaded into slots already occupied.
1818 kes Apply Command ACL filter to JobId list in restore command.
1819 kes Correct typeo in var.c patch.
1821 kes Don't let Bacula prune File or Job records for the current Job.
1822 kes Fix variable substitution pad + inc bug reported (with patch)
1825 kes Correct SQLite log table index as reported by Luca Berra.
1827 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1829 kes Begin implementing new comm signals for API.
1830 kes Fix a few places in lib/message.c where the open fd may
1832 kes Continue implementing lib/bsock.c (real class). Make jcr,
1833 who, host, and port private. There are new methods to access
1834 them for non-class use. This required touching a number of files.
1836 kes Add LANG=C to autoconf/randpass so it works with languages other
1837 than English. Fixes bug #788.
1839 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1841 You will not be able to generate Include/Exclude list any more.
1842 It will be fixed soon.
1843 If you want to use this, you can apply
1844 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1846 kes Restore of sockets created false error messages because Bacula
1847 no longer restores sockets, but the code was still trying to
1848 set the attributes on a non-existent file. Reported by a user.
1849 ebl finish RecyclePool feature
1850 Media will takes Pool.RecyclePool
1851 when moving from Scratch to a Pool or when user will do
1852 update volume=xxx frompool
1853 To use it, add RecyclePool = aPool to your Pool resource
1856 RecyclePool = Scratch
1860 kes Expand new BSOCK class adding signal() and new BNET signals.
1861 kes Begin enhancing the dot commands adding a new API function
1862 that returns more information and will make it easier
1863 to interface to the Director from a program.
1865 kes Make DEVICE fd private. Its new name is m_fd, and can be
1866 obtained with dev->fd() outside the class. This is the
1867 first of many DEVICE members to be made private.
1868 kes Implement Michael Renner's idea on having a virtual disk
1869 changer. I made some minor modifications (e.g. I did not
1870 implement the Virtual Changer directive, but simply set
1871 the Changer Command to an empty string.
1873 kes Implement a BSOCK send() method that writes the whole record
1874 in a single write() request rather than in two.
1875 ebl add update volume=xxx recyclepool=yyyy
1876 volume takes recyclepool from pool when using update volume=xxx from pool
1878 kes Fix encryption deblocking bug, which caused some restored files
1879 to be truncated. This fixes bug #763.
1880 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1881 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1883 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1884 ebl Use btime_t instead of uint64_t in media patch.
1886 kes Optimize the use of the database a bit in the Status dir command.
1887 Only open it when needed, ensure that if any previous database
1888 was opened, it is closed.
1890 kes Correct VolCatBytes bug from media patch.
1891 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1892 in the case of orphaned records.
1893 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1894 and File records in 300K chunks to be more efficient. This
1895 idea came from Juan Luis Frances (if I remember right).
1896 kes Apply Eric's scratch patch that moves a purged Volume to
1897 the RecyclePool. Question: how is RecyclePool set? what
1898 happens to the ScratchPool?
1899 kes Apply Eric's media patch that collects read/write media
1900 times as well as byte counts. This patch requires a
1901 simultaneous upgrade of the DIR and SD. Note, there
1902 should be some way to turn off timing. I'm not sure
1903 times are in Bacula units.
1904 kes Apply Eric's batch-insert patch.
1906 kes Update projects list.
1908 kes Implement Include/Exclude file lists in FD as dlists using
1909 the new dlistString class. This permits efficiently having
1910 large include/exclude lists and completes project Item 25.
1911 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1912 console is authorized to cancel the job. This fixes bug
1914 kes Modify SD so that the VolCatJobs medium record is updated
1915 at the beginning of a Job rather than the end. This
1916 fixes bug #775 where exceeding MaxVolJobs caused jobs
1918 kes Added a mutex around getting and setting Volume information
1919 so that multiple simultaneous jobs will single thread.
1921 Switch to using Subversion
1922 kes Remove src/pygtk-console/ from configure
1924 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1925 plus the entrypoints.
1926 kes Apply patch supplied that corrects debug print
1927 in canceling jobs for max run time. Supplied as
1928 part of bug #621, which was previously fixed.
1930 kes Test on job_canceled() and sd_msg_thread_done inside
1931 loop starting the message thread to avoid a race condition.
1933 kes Remove rl_catch_signal from console.c as it conflicted
1934 with the header definition. Fixes bug #765.
1935 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1937 kes Clarify some stored/acquire messages to indicate if the
1938 problem is with read or append.
1940 kes Fix memory leak with storage ids in cats/sql_get.c
1941 kes Terminate watchdog earlier to avoid reference to released
1942 memory -- reported by Jason Austin.
1943 kes Move closing the database from jobq.c to the director daemon
1944 termination routine. This fixes memory leaks for shadow jobs
1945 (i.e. migration jobs).
1946 kes Free up the unique jobid chain items in migrate.c. This fixes
1947 a memory leak problem.
1948 kes Convert some ugly looking for statements to use foreach_alist
1949 in findlib/find.c. This will facilitate converting the structures
1950 to use dlist (for large include/exclude lists).
1951 kes Fix a bug in the btree.c and btree.h routines, then rename them
1952 rblist and add them to be built in src/lib. Include some new
1953 methods written by Rudolf Cejka that make the code more readable
1954 (hides some of the ugly casting).
1955 kes Add set_next() and set_prev() methods which make the code much more
1956 readable. Also add a new dlistString class that facilitates storing
1957 strings in dlists. To be used in the large include/exclude lists.
1958 kes Make some trivial modifications to lib/tree.h that use rblist
1959 rather than dlist for storing the tree links. This was suggested
1960 by Rudolf Cejka. The result of this is that the restore tree now
1961 uses red-black binary trees rather than simple linked lists. This
1962 should give rather dramatic speed improvements for directories
1963 contining large numbers of directories/files (more than 10000).
1965 kes Fix maxruntime bug #621.
1967 ebl Implement the include JobID in spool file name project.
1968 kes Reorder projects file in order determined by Jan 2007 vote.
1969 kes Implement item #12 on project list -- quick release of FD by
1971 kes Fix open of SQLite3 db where user does not have write permission
1972 so that DIR does not crash. Fixes bug #761.
1974 kes Add back missing @ in Win32 Makefile.
1975 kes Change 'Device not configured to autolabel' from INFO
1977 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1978 which should restart an indefinite # of times.
1979 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1980 other DIR specifications.
1982 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1983 Fix path quoting in SQLite scripts.
1984 Fix problems with SHGetFolderPath.
1986 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1988 kes Fix Job restart on error bug that promotes an Inc to a Full
1989 backup. This should fix bug #755.
1990 kes Add qt-console and first cut of code.
1994 kes Fix Bacula->Documentation link on Win32 to point to index.html
1995 instead of bacula.html. Fixed bug #750.
1996 kes Return JobId in db_get_job_record() when JobId==0. This should
1998 kes Do not release source pointers when restarting a failed job.
2000 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2001 This *should* fix bug #747.
2002 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2005 kes Modify USTORE constructor to set an empty store_source string,
2006 and don't copy the store_source string in a cancel. Hopefully
2007 this will fix Arno's seg fault, bug #744.
2008 kes Add back code to disable conio in configure. Fixes bug #743.
2009 kes Correct the Options scanner in the FD to correctly handle
2010 SHA1 option, which was eating the next option. Reported by
2012 kes Add code to indicate when the SD is spooling, spool wait, and
2013 despooling as requested by Alan Brown.
2015 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob