1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
34 kes Setup rstorage correctly. Virtual backups are working.
36 kes Move setting JobLevel and JobType into a method, which should
37 allow completing Virtual Backups.
38 kes Fix verify jobs to work again.
40 kes Virtual Backup tweaks -- it is close to working.
42 kes Ensure that SD tried to mount a volume not in an autochanger
43 at least once before asking for operator intervention.
44 kes Make SD aware of Virtual Backup jobs.
45 kes Add VirtualFull for bat.
46 kes Changes to get read storage correct for Virtual Backup.
48 kes Remove old code from label.c
49 kes Split display_display_info() out of write_bsr_file()
50 kes do_vbackup_init() working -- i.e. bootstrap file built.
51 kes Change Bacula trademark owner from John Walker to Kern Sibbald
52 kes First non-working cut of vbackup
53 kes Correct FD heartbeat code to use volatile variable accessed by
55 kes Zero thread id with memset if on Win32 in case it is a struct.
56 kes If cannot create JobMedia record, continue to try to write eof
57 and clean up in block.c
59 kes Add code to interface OpenSSL to new Win32 pthreads code which
60 used a structure for thread_t.
62 ebl tweak bat for win32 compilation
64 ebl Remove tokyo cabinet from the source
65 ebl Update configure/autoconf to support berkeley DB
66 ebl Add a sort to db_get_file_list() to improve bsr construction time.
68 kes Add a mtx-changer.conf file that is not overwritten during
69 an upgrade. It fully configures the mtx-changer script.
70 kes Clear in-use bit on vol when unused while swapping.
72 kes Remove sleep at end of ./bacula
73 kes Clear hash packet for hardlinked files correctly. This corrects
74 a long standing bug where hardlinked files selected individually
75 would occasionally not be restored.
77 kes Apply Eric's patch to ensure that autoprune does not return
78 a Volume not in the autochanger unless requested to do so.
79 kes Correct bat restore display of multiple drives. This fixes
81 kes Do find_a_volume() each time an unload is done. This
82 fixes the failure of maxvol2-test.
84 kes Add some SD debug code.
85 kes Do find_a_volume() each time an unload is done.
86 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
87 and adds --with-db-port to ./configure.
88 kes Use Qmsg() in job.c watchdog callback.
90 kes Release main control rwlock if ABORTing.
91 kes Make watchdog connect timeout queue messages rather than sending
92 directly to avoid lock conflicts with the real thread.
93 kes Add const char in dbd.c to avoid compiler warnings.
94 kes Fix python compiler string warning. Note, IMO the GNU C++
95 compiler guys have made a *very* bad change to their compiler.
96 They now force all strings to be 'const' unless you explicitly
97 cast them, which is extremely ugly and ruins nice code as well
98 as creates a lot of useless work.
100 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
101 mt. This fixes bug #1116.
102 kes Add const in python files to reduce compiler warnings.
103 This may have to be backed out because of later compiler
105 kes Fix failure of 2drive-concurrent-test. Always read label;
106 clear_unload() only after drive is defined in acquire_for_read().
108 kes Generally clean up the manual tape loading code. The main
109 conceptual change is that when a volume is marked to be unloaded,
110 its volume name is retained, and it is only marked as unloaded
111 when either the autoloader says it is unloaded or another tape
112 is read on that drive.
114 kes Add debug code and refactor subroutine in stored/mount.c
115 kes Fix format problem in bscan output reported in bug #1105.
116 ebl Fix get_next_volume_for_append logic with autochanger
117 - use pruned volumes if found
118 - don't reset the inchanger flag after getting a recycled volume
120 Fix recycle_oldest_purged_volume to take InChanger flag in account
122 ebl Add mmap/unmmap implementation for tokyodbm under win32
124 kes Make first step toward eliminating globals from config
125 scanning. Also should be a workaround for FORTIFY_SOURCE
126 GNU C bug -- fixes bug #1042.
128 kes Apply duplicate job tests to restarted jobs.
129 kes Copy more data when restarting a job so that run
130 overrides are kept. This should fix bug #1094.
132 kes More word alignment cleanup.
133 kes Fix bug where SD did not ask operator if the device could not
134 be opened. Reported by Eric.
136 kes Add dbuser to DIR conf file (replaces user).
137 kes Add --with-db-password to ./configure
138 kes Fix regress to handle db_password.
139 ebl Add new "status storage slots" that list autochanger
141 ebl Update vtape driver to compile only under Linux.
142 ebl Fix a bug when restoring with a wrong mediatype.
144 kes Eliminate ints from conf files and structures to avoid
145 word alignment problems
147 kes Fix bug reported by Scott Barninger where the bacula script
148 refers to scripts in the wrong directory. Needed to meet the
149 requirements of recent FHS location changes.
150 ebl Disable vtape for FreeBSD.
152 ebl Modify disk-changer to check if slot contains something before
155 ebl Fix vtape on win32 and debian.
156 ebl Fix autoselect patch (cause segfault).
158 ebl Fix autoselect option broken for a while. Fix #1089. Need some
159 work with StorageId to be able to use a particular drive in a
162 ebl Rename vtape to vtape.
163 ebl Update vtape driver.
165 ebl Modify vtape driver to avoid sparse file.
166 kes Add make clean of qt-source directory during ./configure
167 kes Store last block number written to tape in DEVICE and
168 use it for testing for correct last block on EOT.
170 Release Version 2.4.0:
174 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
175 This fixes bug #1095.
177 kes Add create_postgresql_database.sql to Win32 installer. Should
178 fix problem reported by Juilio Monteiro.
179 kes Get correct slot when auto unloading a device. This fixes bug
182 kes Fix multiple media restore.
183 kes Make DEVICE Slot private and access it via a method.
184 Allows better control over when it is set and cleared.
185 kes Fix possible seg fault if SQL error.
187 kes Add Martin's fixes to argument scanning for the estimate
188 command. This fixes bug #1093.
189 kes Add debug code to SD.
190 kes Fix renaming a Volume, which used the wrong Volume name.
192 kes If operator has rewind tape, print warning, release tape and
193 try once more. If tape is positioned somewhere, something went
194 wrong, so mark the tape in error and try once more. Previously
195 this error was fatal, now it produces an error message.
196 kes Ensure correct volume name displayed during restore
197 kes Ensure that Volume is mounted for restore.
199 kes Fix a few more Coverity reported problems.
201 kes Apply Allan Black's status dir job count patch.
202 ebl Add information about IMPORT/EXPORT slots in mtx-script.
203 kes Enhance a couple of SD debug messages.
204 kes Tweak unload flag setting and ensure it is set during swap.
206 ebl Fix #1091 about bad output in estimate command.
208 kes Modify autochanger locking to attempt to avoid race
210 kes Make sure device not busy before doing label command.
211 kes Display open() errors except when polling. Previously too
212 many were suppressed. This should fix bug #1070.
213 kes Fix Win32 reparse points. Bacula will not recurse into any
214 reparse point directory, including mount points, unless the
215 directory is explicitly mentioned at the top level (same as
216 with Unix). A file that is linked to another file will be
217 backed up -- much as Unix does for hardlinked files.
218 This fixes bug #1041.
220 kes Remove double quotes from ChangeLog and ReleaseNotes
221 kes Remove StorageId test when pruning and recycling (Eric's changes).
222 kes Remove old form of locking when getting volumes -- causes deadlock.
223 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
224 the name unique and to eliminate compile time error.
225 kes Add accurate.o to Win32 FD Makefile
227 kes Fix cats dll build on Win32 after db_update_job_end_record
228 calling sequence change.
229 ebl Switch to tokyo dbm instead of htable in accurate code
230 ebl Include tokyo dbm to bacula source tree
232 kes Fix buffer overruns detected by Coverity.
234 kes Tweak joblog display.
236 kes Implement --without-qwt
237 kes Fix layout of restore tree dialog
238 kes Add configure bat QWT libraries, so that bat can be built
239 with or without the QWT libaries.
241 ebl Add dummy tape driver for regression tests.
242 kes Make sure we unload the right slot when swapping.
244 kes Add debug times, reduce size of two-pool-changer test
246 ebl Tweak autoconf scripts for vtape
248 kes Improve SD reserve debug code.
249 kes Testing an improvement to free up volumes no longer in use.
251 kes Rework SD acquire for read to handle autochanger Volume
253 kes Implement regression that explicitly tests swapping a Volume
254 from one drive to another.
255 kes Enhance disk-changer to detect most error conditions.
256 kes Fix SD code so that it properly swaps a Volume between drives.
257 This fixes bug #1083.
259 kes Apply libdbi patch from Joao Freitas for regress and for
260 Bacula trunk. Regress now works with libdbi. Nice.
261 kes Apply .nobackup patch from bug #1077 submitted by
263 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
264 name into jobs cloned via the run directive.
266 kes Prevent a Volume that is being swapped from being freed from
267 the volume list. This will most likely fix, at least partially,
269 kes Fix strippath so that it does not get a buffer overrun and crash FD.
270 This fixes bug #1078.
271 kes Remove 50 millisec wait in SD that broke debugger.
272 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
273 that a job may run, counted from when the job was scheduled.
274 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
275 a job may block waiting for a resource, counted from when the job starts
276 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
277 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
278 that implements multiple commands per line in the console when using
279 readline. Modify the default to use a semicolon as the command separator.
281 ebl Fix SQL query in migration code.
282 ebl Make accurate mode with hash disk pass regression tests
284 ebl Implement first cut of accurate backup with hash disk.
286 kes Force unload of volume when wrong volume mounted in SD.
288 kes Fix bat seg fault at termination.
289 kes Add Bacula generated version to bat about box.
292 kes Experiment with allowing multiple read jobs.
293 kes Move final volume swapping code to DCR method and
294 call it from acquire_for_read().
295 kes When wrong volume is mounted during read, unload_autochanger.
297 kes Integrate the libdbi changes from Joao Henrique Freitas
299 kes Stop searching for Volumes in SD askdir if DIR returns the
300 same volume name twice in a row.
301 kes Close bat console windows first to eliminate error message
304 kes Tweak the swap Volume from one drive to another code so that
305 it now seems to work.
306 kes Resolve several problems with recycling that broke the new
307 code (these problems are in 2.2.9 as well).
308 kes Remove the volume lock when calling the sysop code.
309 kes Don't mark a reserved volume with no writers as unused otherwise
312 kes Rework class structures for VOLRES, DCR, and DEVICE to make
313 the method names a bit more logical, and for more logically
314 handling the responsibilities.
316 kes Remove redundant code in terminating the scheduler that just
317 causes a seg fault in many cases.
318 kes Cleanup releasing a volume and make it a DCR method.
319 kes Improve algorithm for detecting pre-reserved volume and
322 kes Tweak volume swapping code so it works.
323 kes Correct name overloading in mount.c
324 kes Replace released flag in VOLRES with reserved and add access
325 methods for the VOLRES class.
326 kes Prevent volume from being released while being swapped.
327 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
329 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
331 kes Refactor parts of stored/mount.c
333 ebl Add sanity checks for VolWriteTime and VolReadTime
334 ebl Take care of bad clock changes while computing VolWriteTime
335 and VolReadTime. This should fix or limit #1066
336 kes Correct error string numbers in dird/catreq.c
337 kes Restructure reserving, acquiring, and mounting volumes. Calls to
338 autochanger are deferred for mount.c -- simplifes the code.
340 kes Do not prune any running job. It just fails the job.
341 kes Lock the volumes when changing dev->reserved_device and marking
342 the volume unused otherwise the device can get reserved by
343 another job before the volume is released, thus blocking it.
345 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
346 kes Fix bug #1063, reuse of freed ptr in list nextvol.
347 kes Release regex compile buffer in filed/job.c
348 kes Add proper type of const char in sql_create.c
349 kes Turn off debug in daemon termination routines
350 kes Move free_volume_list() before devices are freed in stored.c
351 kes Fix reference to uninitalized stack variables in bregex.c.
352 This should correct bug #1067.
354 kes Fix possible seg fault in SD when freeing a volume entry.
356 kes Implement unload_dev() before swap device.
357 ebl Add statistics prunning with option and menu
358 kes Separate unload_dev() from unload_other_device() in autochanger.c
360 kes Apply patch from bug #1069 that corrects spurious error messages
361 when ACLs enabled on SGI but no ACL exists.
362 ebl Fix small segfault in bacula-sd when debug level is 500
363 kes Modify run_program() and run_program_full_output() to use
364 call by reference for the results string. This corrects a long
365 standing problem where the address of the string may be changed
366 in the subroutine but not in the calling program.
368 kes Re-enable code to remember last volume mounted on a non-tape
370 kes Add patch supplied in bug #1068 that fixes a SD crash when using
371 a Virtual autochanger.
372 kes Generate correct JobMedia records during spooling/despooling when
373 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
374 <tih@hamartun.priv.no> for excellent analysis and testing.
376 kes Tweak hash algorithm for htable using Martin Simmons idea
377 for doing a circular shift.
378 kes Remember what volume is in VTLs (previously turned off for
380 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
381 pointed out some problems in creating JobMedia records during
382 spooling with concurrent jobs. Fix the problem by updating the
383 start file position before despooling and generate a jobmedia
384 record at the end of despooling.
386 kes Fix handling of JobMedia records during spooling and when a
387 Volume is changed without actually writing data to the Volume.
389 kes Rework certain SD locking based on gdb tracebacks of deadlocks
390 sent by Eric. This code now uses only the volume_lock() rather
391 than the reservations lock when at EOM and acquiring a new
393 kes Ensure only one exit point in several subroutines.
395 kes Implement bsock code to permit locking. Use the new code in Verify
396 in the FD to prevent the heartbeat thread from disrupting the Verify
397 data sent to the Dir.
398 kes Modify SD locking to eliminate locking the reservations system from
399 outside the system. Use the volume lock when getting media data
400 and reserving a new volume at end of media.
401 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
402 when SD starts are not locked into place.
404 kes Fix error compiling runscript code on 64 bit machines.
405 kes Tweak Win32 mount point code.
406 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
407 cleared giving bad file estimate).
408 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
411 kes Keep Schedule run lists in order as suggested by
414 kes Implement autostart scripts for Debian.
415 ebl Implement upgrade catalog scripts.
417 ebl Apply jobstat patch for long term statistics. Have to implement
418 purge stats command and upgrade scripts.
419 kes Fix mtx-changer.in for broken Debian mt program.
421 kes Fix large number of JobMedia records reported by Eric Bollengier.
423 kes Apply doc fix from bug #1062.
424 kes Resolve crash and improper restore wx-console Win32 restore
425 GUI. Fixes bug #1065.
426 kes Update Win32 wxWidgets to latest version.
427 kes Attempt to do correct handling of Win32 mount points. Should
429 kes Fix Win32 FD backup/restore memory leak due to improper termination
430 of BackupRead/Write. This fixes bug# 1038.
432 ebl Reduce memory usage for accurate backup, working only with ctime
433 and mtime. (not all Lstat field)
434 About 40MB for my Linux system (400.000 files)
436 kes Add dcr->reserved_volume flag that allows us to release a volume
437 even if it is not vol->released. This allows maxvol2 to work when
438 Volumes expire and we are already writing to the device (i.e. a
439 volume is pulled out from under us by another job terminating after
440 we reserve the drive).
442 ebl Permit multiple command/console per runscript definition.
443 RunScript { command = /bin/true ; command = /bin/false ... }
444 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
445 (restart an application) just after the VSS snapshot on windows.
446 kes Don't zap dcr values during release_volume() as they might
447 have the next Volume to be mounted.
448 kes Fix AIX prototype.
450 kes Second cut of drive switching during backup.
453 kes Update Win32 version of wxWidgets to most recent version.
454 kes Tweak Copy job details.
455 kes Rework dir_find_next_appendable_volume to make a bit more effort
456 to find a suitable volume before giving up.
458 kes Make ask_sysop_to_create... to return if waken from wait.
459 This helps get out of blocked conditions.
460 kes Experimental implementation of switch_device in reservations.
461 kes Implement FD version to allow easier protocol changes.
462 kes Add Plugin Options string -- not yet passed to FD.
463 kes Implement PluginOptions ACL.
465 kes Attempt to correct problems with restores with autochangers and
466 use counts going negative
467 kes Rework SD status command and implement API for bat. Implements
468 header, runing waitreservation, devices, volumes, spooling,
469 and terminated status keywords.
470 .status storage=xxx <keyword>
471 kes Clarify TLS error message by adding double quotes around name.
472 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
473 kes Pass jcr to tls routines so debug messages can be handled better.
474 kes Rework jobq resource allocation code, and possibly fix a bug
475 that caused reference counts to get out of sync.
477 kes Rename fd/dir plugin to use Bacula standard underscore.
478 kes Plugin work -- bring dir up to fd level.
479 kes Start implementation of VTL code
480 kes Fix Win32 build after adding new cats subroutine.
482 kes First cut at Duplicate Job implementation.
484 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
485 kes Start PluginOptions string, and refactor a bit of ua_run.c
486 ebl Apply Allan patch that permit to reset recyclepool.
488 kes Test patch -- possible fix or improvement for bug #1053
489 kes Refactor FD and SD status commands to permit new API code in
490 SD, and to fix Win32 build.
491 kes Win32 build is now working.
493 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
494 some ideas in patch from Scott Bailey.
495 kes Begin implementation of duplicate Job control.
496 kes Fix some of Win32 build after recent additions.
497 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
498 which causes the FD to detect whether or not the OS has the
499 honor no dump bit (*BSD systems), and if so, to skip backing up
500 any file with this bit set. The feature is enabled by setting
501 'honor no dump flag = yes' in the Options section of a FileSet.
503 kes Correct po warning message with datarootdir
504 kes Implement more code in dird.c to put configuration parsing in
505 a class rather than use globals.
506 kes Restructure SD status command for implementation of bat API
509 kes Suppress incorrect 'Will not descend from x into y' messages.
510 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
511 daemon globals used by parser.
512 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
514 kes Fix free of plugin_list when none exists.
516 ebl Apply accurate project patch.
518 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
519 on non-mempool object)
520 kes First cut of converting FD .status to work with bat API.
522 .status client=XXX header
523 .status client=XXX running
524 .status client=XXX terminated
525 kes Implement first cut of Copy Job.
526 kes Implement Catalog in Pool resource. It overrides catalog specified
527 in the Client resource.
529 kes Apply patch (with some difficulties) from Joao Henrique Freitas
530 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
532 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
533 ftruncate() actually works. In the case of some (cheap) NAS devices,
534 it does not, and so recycling NAS Volumes does not work. The code
535 simply unlink()s the file, then recreates it. This fixes bug #1011.
537 kes First incomplete cut of big malloc blocks for htable.
538 kes Tweak plugin code.
540 kes Plugin debug code + tweak a couple bat dialog layouts
542 kes Fix creating first JobMedia record during Migration to include
543 proper index. This caused slow restores of migrated jobs.
544 kes Temp fix to plugin name file_index.
545 kes Bacula backed up and restored a MySQL database.
547 kes Implement plugin restore.
548 kes Implement parsing of db_driver to give db_type index.
550 kes First cut of plugin restore code.
551 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
552 and do not strip paths on symbolic links.
553 kes Set catalog backup database and user name from values specified on
554 the ./configure line.
555 ebl Fix #1031 about wrong pool source information in job report.
558 kes Remove a redundant jcr argument to find_files, match_files, and
560 kes Implement '.status dir header|scheduled|running|terminated' that
561 prints the requested status section. With the exception of the
562 header, the other reports have fields separated by tabs (\t).
564 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
565 a resource embedded run command to find a since time if no explicit
566 since time was supplied on the command line.
567 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
568 that updates the state file at job termination time in addition to
569 when the daemon terminates.
571 kes First version where a plugin did a backup.
572 bpipe-fd.so created a backup file, wrote a test
573 string to it, and Bacua could restore this fabricated file.
575 kes Implement DB Driver = string for the DBI driver.
576 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
577 kes First cut of code for loading Win32 plugin dlls. Implement
578 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
579 and implement a dlfcn.h file based on opengroup's definitions of
582 kes First cut plugin directives.
584 kes Apply patch from bug #1049 to prevent stripping the path on a
586 kes Attempt to fix bug #1047 where stripping a path corrupts the
587 heap. Waiting for feedback.
588 kes Correct the Mount message not to suggest labeling a new tape
589 when doing a restore. Submitted by email by John Stoffel.
590 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
591 FD by using casting. Reported in bug #1042.
593 kes A bit of crypto cleanup. More later.
595 Release Version 2.2.8
597 kes Apply patch from Martin to correct bug #1040, bscan sets existing
599 kes Fixed important spelling error in doc -- bug #1045.
601 ebl Fix bextract to be able to extract non-portable Win32 data to
603 kes Move initialization of read/write res lock earlier in the code.
604 This fixes the crash with a null conf file. This fixes bug
606 kes Redefine CURES in lib/parse_conf to be URES and move it all
607 into lib/parse_conf.c -- this responds to bug #1042, but does
608 not fix it. The fix is not to compile with FORTIFY_SOURCE.
609 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
610 the trunk SVN. I don't think this was reported as a bug.
612 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
614 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
616 kes Add DataDespooling and DataCommitting status (committing is
617 the last despooling).
618 kes Finish implementation of new reservations code noted below.
620 kes Fix bsnprintf for float point numbers. I broke recently when
621 parameterizing some variables. This fixes bug #1036.
622 kes Undo recent reservations changes ... will apply them later
623 when they work better.
625 ebl Fixes #1034 which cause mysql to hang the connection after 8h
626 ebl Change default statistics target of filename.name and path.path
627 fields for PostgreSQL. This speeds lookup by indexes. Thanks
629 kes A few more tweaks to new reservation code. Make sure to clear
630 vol released flag when retaking volume. When reading label and
631 label is bad mark volume unused. When recycling, mark volume
632 unused so it can be renamed.
634 kes Fix reserve_volume() so it doesn't release a volume in use
635 (i.e. a volume entry not marked released). This should be
636 the last part needed to fix bug #1018.
638 kes Move Heartbeat documentation from Job to Director resource.
639 This fixes bug #1033.
641 kes Fix existing switch drive SD code to call autochanger to release
642 any old volume. This must be done to keep the autochanger from
643 releasing subsequently newly reserved volumes in doing a close().
644 This should fix bug #1018.
645 kes Fail if attempting to get console input in batch mode. This
646 should help fail RunScript console commands that are incomplete.
647 kes First cut implementing switch_drive() in SD (not actually called).
649 kes Implement first cut running console commands in a RunScript.
651 ebl Fixes bug #1028 where 'Selection Type' option was not usable
653 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
656 Release Version 2.2.7
658 kes Add new free_tls() entry point so that Win32 builds.
659 kes Fix compile warning in src/lib/util.c
660 kes Fix entry point for edit_job_codes() so that Win32 builds.
661 kes Fix seg fault Frank Sweetser reports in regression testing
662 on his systems. The problem was that the original author of
663 bsnprintf.c did not take into account the side effects of
664 using ++x in the argument to a #define.
665 kes Make SD protocol backward compatible with version 2.2.x.
667 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
668 because Bacula no longer restores sockets.
669 ebl Always use ignorecase fileset option on win32 FD.
671 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
672 that implements double quoting include names in conf files,
673 and also allows piping input by having the first character
674 be a vertical bar (|).
675 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
676 that implement %f in RunScripts to pass the FileSet name.
677 kes Skip leading | when lex input comes from a pipe as suggested
678 by Michael Stapelberg <michael@stapelberg.de>.
680 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
681 Nerijus Baliunas <nerijus@users.sourceforge.net>
683 kes Implement Plugin Directory and plugin events.
685 kes Implement a security enhancement: TLS authentication but no
686 encryption. Enabled by setting 'TLS Authentication = yes'.
687 Note when this is on, TLS encryption is turned OFF!
689 kes This patch corrects a problem where the maximum concurrent storage
690 jobs counter gets out of sync during restore jobs causing jobs to
691 'wait on max Storage jobs'. This patch fixes bug #1009.
693 kes This patch fixes bcopy so that it produces correct Volumes.
695 kes This patch eliminates spurious output to the console during a VerifyVolume
696 job that contains encrypted data. It fixes bug #1024.
698 kes This patch prevents the 'status dir' command from trying to use a scratch
699 volume and possibly moving it from one pool to another. This patch fixes
702 kes Add new include to postgresql.c suggested by Marc Cousins so
703 that it compiles correctly with pgre version 8.3.
705 kes Fix --archivedir addition to configure. Replace it with
706 --with-archivedir in configure.in This fixes the regression
708 kes This patch fixes bug #1012 where the job is canceled because
709 of Max Run Time exceeded when the job has not yet started.
711 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
712 one 'part' to write. Instead of each part being stored on disk,
713 written to DVD, then deleted from disk, all parts are written to disk,
714 and only the last is written and deleted from disk.
715 kes This patch fixes the status command to include the formating string for
716 JS_AttrInsterting. It fixes bug #1021.
717 kes This patch should fix the Mac OS X build problem on the latest
718 Darwin, where sys/types.h was not included correctly (apparently
719 due to a change in the Mac headers). The solution was to explicitly
720 ensure that it is defined for the ./configure.
721 This patch also has a rebuild of configure that includes the Debian
722 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
723 kes This patch should ensure that queued messages to the console are
724 displayed as soon as possible. It should fix bug 1007, but has been
725 reported not to work.
727 kes This patch fixes the infinite loop when trying to increase the
728 maximum number of volumes in a Pool during the add command.
729 This patch fixes bug #1008.
731 Release Version 2.2.6
733 db Remove extra data on estimate command in joblist for bat.
735 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
736 really change anything, but is the beginning of doing it *right*.
737 To do it completely right the LastWritten date must be passed to
738 the SD, but it is not yet done.
739 kes Minor tweaks to some bat restore SQL.
740 kes This patch fixes bug #1003 where putting the message output from
741 a Verify job into the catalog results in a recursive loop. The problem
742 seems to show up only with postgresql (to be verified).
743 kes Correct %x to %p in postgresql debug statement.
745 kes Fix bug #942 where lots of emails where generated when the heartbeat
746 interval was low and Bacula wanted a different tape from the one in
749 ebl Add new SD despooling attributes and Dir inserting attributes
750 job status codes in the catalog (Status table).
752 ebl Use qmake-qt4 instead of qmake when available (debian system).
754 kes Add a security warning to src/cats/make_catalog_backup.in indicating
755 that passing the password via the command line (arg 3) is insecure.
756 This responds to bug #990 (it doesn't fix it).
758 kes Set default debug_level to zero. This corrects bugs #991 and #993.
759 kes Fix a crash in bat when it cannot connect to the Director for example
760 if the Director is not running.
761 kes Remove redundant INDEX (JobId) from File table in the trunk.
763 kes Make explicit exception to GPL in LICENSE to permit linking
764 the Win32 FD with Microsoft VSS code.
765 kes Apply the Solaris package patch from
766 Masopust, Christian <christian.masopust@siemens.com>
767 kes Apply the patch to optionally add a timestamp in the debug output
768 submitted by Mariusz Czulada <manieq@wp.eu>.
770 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
771 backend (sql_strerror). Fixes bug #989
773 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
774 It applied with no problems.
775 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
777 kes Redirect stderror to stdin on mt status command in mtx-changer.in
778 since the status is returned on stderr on Solaris.
779 kes Activate Close button on tray-monitor window. This fixes
781 kes Check for NULL item in parse_conf.c before calling it. In the
782 case of Device, there is no item and this caused a seg fault when
783 Device appears in the conf file.
784 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
785 avoids pulling in config.h multiple times in some new code.
787 kes Fix spurious warning message printed when creating a volume with
788 a LabelFormat. This fixes bug #976.
790 Release Version 2.2.5
792 kes Add JobId in place of Job name in all the Jmsg() output.
793 kes Correct the APP_DESC for the Win32 storage service (remove an e).
795 kes Make maxvol-test and new more strict maxvol2-test work.
796 kes Print JobId in all Jmsg() job output.
798 kes Add new SD despooling attributes and Dir inserting attributes
799 job status codes. This fixes bug 961.
800 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
802 kes Fix doc issue. This fixes bug #963.
803 kes Fix listing performance problems in bat. Pointed out by
805 kes Remove old debug code.
806 kes Fix bat code that tests for Win32. This should fix bug #968
807 kes Query 5 list wrong Vol after migration. This fixes bug #960
809 ebl Fix #969 where user can't change Replace option in restore menu.
811 kes Save jcr in thread specific data (tsd) for each thread.
812 kes Make Dmsg() print JobId as -%u.
813 kes Make Jmsg, Emsg, and others automatically pickup the jobid
814 for the thread if it exists.
815 kes Remove old reservation debug jid code.
816 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
817 ebl Add an option that permit to specify spool size in job
818 definition. (Applying patches/testing/spoolsize_per_job.patch).
819 You must upgrade SD and DIR at the same time.
820 dvl Add new configuration item --archivedir
821 dvl Adjust regression tests to use tmp not /tmp. This will allow
822 multiple concurrent runs of the regression tests.
824 kes Fix race condition that drops final block written to volume.
825 This happens in rare cases with multiple simultaneous jobs
826 when the Volume fills. This fixes bug #964. May be related
827 to bug #935 and possibly #903.
828 kes Eliminate more strerror() and replace with bstrerror().
829 kes Remove BSD getopt and replace with unrestricted IBM version.
830 kes Fix Win32 build for changed calling sequences.
831 kes More tweaks to the mount volume routines to get everything
832 right. Changed variable name from find to have_vol, which is
833 much easier to understand.
834 kes Enhance btimer debug code.
836 kes Fix FD->SD authorization failure, which was due to spurious
837 wakeups from a pthread_cond_timedwait(). Simply check the
838 predicate before continuing. This fixes bug #953.
839 kes Add const char where needed (more to do). Remove temp debug code.
841 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
842 kes Don't overwrite error message in check_tables_version.
844 kes Unlock batch insert tables with same calls used elsewhere.
845 kes Allow starting 59 jobs a second.
846 kes Make SD session key more random.
847 kes Add retry for SQLite opening db if it fails. Probably helps
849 kes Suppress extra error messages during batch insert failure.
851 kes Add jcr to timer packets so if killed message can be sent to job.
852 kes Add JobId to all Dmsg() output.
853 kes Put some FD auth code on dbglvl rather than fixed.
854 kes Return insert attributes error message in db msg buffer to avoid
855 false error messages. Helps fix bug #966.
856 kes Separate batch init error messages. Probably helps fix bug #966.
857 kes Make SD code that contructs attribute insert check string lengths
859 kes If Dir gets an error during inserting attributes, cancel SD.
860 This reduces unnecessary error messages.
862 kes Correct search boolean for getting Volume info
863 ebl Cleanup batch insert code. Probably fixes bug #965.
864 kes Back out one small change to the reservation system (reserving a volume).
865 kes Rework how a Volume is mounted. It is now much more intelligent and
866 will always attempt to use any mounted volume if possible and reduces
867 calls to the Director asking about volumes.
869 kes Turn off some code when batch insert not enabled.
870 kes Edit FD name in connect error messages.
871 kes Rework the reservation system to take into account that the Director
872 might give us a Volume that is different from the current one being
873 used, and to ensure that we don't exceed Maximum Volume Jobs.
874 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
875 fatal error with multiple jobs running'
876 kes Add more debug code in reservation system.
877 kes Implement maxvol-test to check bug #947.
879 kes Add code to handle tray monitor separated from Win32 FD.
880 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
882 kes Add missed return in fixing verify bug -- trunk only.
883 ebl Fix a command parser issue causing a director segfault.
884 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
886 kes Increase the max block size to 4MB fixes bug #957.
887 kes ERABT if user sets min block size > max block size. Fixes bug #956.
888 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
889 is not properly mounted (recognized) during a poll.
890 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
891 Job that has differences reports Verify OK.
892 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
894 ebl Add an option to operate on all pools with update vol parameters.
895 This complete the project 20. Patch from Nigel Stepp.
896 ebl Add history support to bconsole when using readline.
897 Using Ctrl-D to exit doesn't update .bconsole_history
898 kes Modify new volume algorithm to use max MediaId for generating next
899 volume number rather than the count of Volumes. This should essentially
900 eliminate the failure rate if some volumes were deleted. Bug #921.
901 kes Begin implemention of Optimize Job Scheduling.
902 kes Implement restore callback that Dirk and I agreed on for bat
903 restore. This fixes bug #928. Restore of backup of zero files fails.
904 kes Fix SQL Catalog logging which broke with new db_escape_string
907 Release Version 2.2.4
909 kes Fix bacula_cats.def for new db_escape_string().
910 kes Increase size of name string when FD making connection to SD.
911 May fix bug #953. FD->SD connection failure.
913 kes Add code to help Dan debug 2drive-incremental-2disk test.
914 kes Add code to try to fix bug #908.
915 kes Add waits to multiple exit detection code to try to force pid
916 file to always be deleted.
917 kes Restore good dev.tar.gz to rescue set appropriate binary property.
919 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
920 trying to switch drives by checking for blocking before unblocking.
922 kes Cancel storage daemon in all cases where FD reports error. This
923 should fix virtually all cases of bug #920.
924 kes Fix db_escape_string() for MySQL which did not compile.
926 kes Fix error message that was clobbered when Dir tells SD it does not
927 have write permission on Volume. This should fix a minor point
928 in bug #942, but not the main problem.
929 kes Add code to cancel job in SD if FD connection fails. This should
931 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
932 dvl Pass jcr and db into db_escape_string() to enable better escaping
934 kes Fix migration code to get correct Volume name with multiple volumes
935 by skipping |. Fixes bug #936.
936 kes Implement patch supplied by Landon to fix bug #944 where using
937 TLS with bconsole uses 99+% of the CPU.
938 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
940 kes Move patches into patches directory.
942 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
945 ebl Using 'm' in bconsole will show messages like before,
946 and not memory usage.
947 kes Fix bug #935, and probably also bug #903 where files were not
948 restored. MediaId was not properly set in JobMedia record after
951 kes Suppress chown and chmod error messages if the FD is not running
954 kes Apply Martin Simmons' patch that should turn off the new API usage
955 when batch insert is turned off allowing building on older
957 kes Add ./configure search in qwt-qt4 for qwt package
959 kes Bacula is now free of 3rd party GPL copyrighted code!
961 kes Add guid_to_name.c/h which replace idcache.
962 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
964 ebl Detect if new PosgreSQL batch insert API is present.
965 kes Correct incorrect mempool call causing Director crash. Occurs on
966 systems without va_copy().
967 sb Update spec files for 2.2.1 release
969 kes Fix memory pool call in ua_output.c. bug #934.
970 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
971 Add test program to fnmatch.c
973 kes Integrate patch to README.vc8 from
974 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
975 edit it to get it into Unix patch format.
976 kes Implement mkpath.c to replace old FSF makepath.c
978 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
980 Release Version 2.2.1
982 kes Update POTFILES.in
983 kes Cleanup a few underquoted AC_DEFUNs in configure
984 kes Apply patch from Martin Simmons that adds a test for va_copy to
987 kes Fix bug #921 by increasing the number of tries to create a new volume
989 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
990 can be called multiple times. Implement a version for machines
991 without va_copy() that gets a big buffer.
993 kes Integrate more portable zone offset code into bsmtp.c
994 Submitted by Attila Fülöp.
996 kes Fix bad SD->FD return status reported by
997 (James Harper) <james.harper@bendigoit.com.au>
998 ebl Fix a bug in read_close_session which return random status
999 thanks to James Harper
1001 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1002 and directory names during restore of single file/directories.
1003 kes Add sanity checks to .sql command when string is empty. Hopefully
1004 that will resolve Dirks Director crash.
1006 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1007 in the bsmtp chat subroutine when debug is >= 10.
1009 kes Fix Director crash when running bat SQL queries.
1010 kes Add David's notes on Item 8: Copy pools.
1012 kes Rework projects file to be current and ready for a vote.
1013 kes Enhance lex scanner error message.
1015 kes Tweak LICENSE file to mention BSD code.
1016 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1017 if specified on the ./configure.
1018 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1019 This class is intended to allow us to open a second bsock to the
1020 Director while in the restore subdialog.
1022 kes Fix configure to create bat Makefile before creating dependencies.
1023 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1024 kes Add a tooltip to the tray monitor.
1025 dvl Set the Director's PID file before dropping privs. This fixes
1028 kes Update AUTHORs file
1029 kes Increase the default max concurrent jobs to 20 in FD and SD to
1030 correspond with the default .conf files.
1031 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1032 some different, of the same file created by RN when porting the
1034 kes Rearrange some of the Win32 directories and the placement of the files
1036 kes Set DEVELOPER flag in version.h
1038 ========================================================================
1039 Release Version 2.2.0
1041 kes Apply a second doc patch from Marc.
1042 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1043 improves the tips section that discusses how to setup multiple
1046 kes Update bat README file.
1047 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1048 corrects a typo in the Recycle status check in db_find_next_volume().
1049 This will probably fix a number of annoying problems with multiple
1051 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1052 bnet calls -- no functionality change.
1054 kes Modify the Verify output to specify if files are missing on
1055 the Volume(s) or disk. Fixes confusion in bug #916.
1056 kes When more than one Volume is read in a migration job, the last
1057 Volume bytes reported are from the last read volume rather than
1058 the last written volume. Fixed. This fixes bug #910.
1059 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1060 It previously printed New Recyle flag is: no. This fixes bug
1063 kes Correct seg fault when switching tape drives during restore.
1064 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1065 be used until after 2.2.0 release.
1067 kes Remove fnmatch() in SD that permitted wild card specifications.
1068 This fixes bug #914.
1070 kes Fix %g in filename returned by SQL for browse tree reported by
1072 kes Fix configure so that it puts config.out in the cwd rather than
1074 kes Attempt to fix the locking problem reported by Eric in bug #906.
1075 kes Make berrno class to leave errno unchanged after constructor call.
1076 kes Make bnet_server use the heap rather than the stack to allocate
1077 its socket fd pointers to avoid a crash at termination. Problem
1078 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1080 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1081 and putting it in depkgs-qt along with Qt4.3.
1083 kes Rework code in acquire.c that switches drives for reading when
1084 the Media Type does not match. This should fix bug #906
1086 ebl Fix a director segfault during job setup #907
1087 kes Correct seg fault in postgresql when first operation returns no
1088 rows. Fixes Dirks File browser problem seg fault with bat.
1090 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1091 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1094 kes Implement PopUp YES/NO dialog for bat.
1096 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1098 kes Correct RunScript to terminate job in FD on failure.
1099 kes Change abort_on_error and AbortJobOnError to fail_on_error
1100 and FailJobOnError in RunScripts.
1101 kes Minor tweaks of code formating in RunScripts, principally to
1102 avoid depassing 80 columns.
1104 kes Eliminate one #ifdef Win32 in bsmtp
1105 kes Implement grow tool to grow a file for testing very large databases.
1106 kes Add big-vol-test to test Bacula seeking with > 5GB.
1109 kes Modify find_next_volume() to return all values in Media record.
1110 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1114 kes Update Release notes
1116 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1117 Warning, in previous beta version, all media get from scratch keep their
1120 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1121 This should fix bug #842. Made a note to look at removing the temp
1122 files at the end of the install.
1123 kes Add ability to mount and unmount a file device providing it is
1124 marked as being removable and has the appropriate mount and unmount
1125 commands defined in the Device resource. This fixes bug #830.
1126 kes When applying a storage override, release all previous storage
1127 definitions rather than just prepending the new storage.
1128 This should prevent a good deal of confusion.
1130 kes Implement ./configure search for qwt libraries.
1132 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1133 Win32 FD. This should fix bug #893.
1134 kes Remove an unnecessary beep in Win32 init code.
1135 kes Update copyright dates in Win32 executable about boxes.
1136 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1137 code with a BSD getopt.c and getopt.h.
1138 kes Remove sched.h from the Win32 compat directory -- not used.
1139 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1140 need to shut it down, do it through the services panel or the command
1142 kes Remove some inappropriate Bacula FSFE copyrights.
1143 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1144 kes Fix regress config non-portable test as pointed out by
1145 Florian Heigl <florian.heigl@gmail.com>
1146 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1147 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1149 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1150 Reported by Frank Sweetser.
1154 kes Fix client-only build.
1155 kes Integrate client-only fixes for bsys (initgroups) and conio from
1156 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1157 kes Make arguments to get_scratch_volume() in same order as other
1159 kes Rework the prune_volumes() subroutine so that after purging and
1160 no volume found in desired pool, it will check for a scratch
1161 volume. This prevents recycling the whole scratch pool.
1162 kes Add code to status storage to print boffset_t (largefile support).
1164 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1165 kes You now need a --with-qwt=<dir> to be able to build bat.
1166 kes Update src/win32/cats/bacula_cats.def to include the new
1167 db_get_query_dbids() call on Win32.
1169 kes Correct a problem when selecting a scratch volume and moving
1170 it to another pool that lost some columns.
1171 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1172 kes Enhance Autochanger error messages to include Volume and device name.
1173 kes Rework prune_volumes() code to take account of InChanger flag,
1174 and to handle recycling volumes going to the Scratch pool and
1175 current pool because the RecyclePool directive.
1176 kes Implement a better and more efficient db_get_query_dbids() to
1177 handle creating and passing back a list of DBIds.
1181 kes Start work on new more efficient DBId subroutine. First use
1182 will be for recycling volume to Scratch inchanger.
1183 kes Increase number of JobIds in pruning from 1000 to 10000.
1184 This to be replaced by above routine.
1185 kes Begin implementation of building Qt4 on Win32.
1186 kes Correct typo in fix I added for bad TLS shutdown.
1187 kes Pull 2.0.3 patches into patches directory.
1188 kes Update Release notes. Include qt-console in line count.
1189 kes Update Projects file.
1191 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1192 bug in migration code where a job that spanned two volumes
1195 kes Implement new BST_DESPOOLING blocked state. Change from locking
1196 during despooling in SD to blocking. This means that other threads
1197 can work with the device structure, in particular the reservations
1198 system while despooling.
1200 kes Fix return in reservation message queue that missed clearing
1201 the jcr lock (implemented 26Jun07 below).
1202 kes Rename a number of dev methods to make locking function names
1204 kes Document locking in lock.c. Move lock structures to new file
1207 kes Move reservations message lock to lock jcr only this
1209 kes Move main SD locking code into lock.c (new file).
1210 kes Update Win32 build to include lock.c
1214 kes Dirk committed the qwt library code for drawing graphs in bat.
1215 kes Tweak install of qwt so that it is integrated with ./configure.
1217 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1218 out by Eric (my typo).
1219 ebl Fix configure.in to get batch mode enable
1220 kes Return correct string from authenticate.cpp in bat when connecting
1222 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1223 spurious line drops when using TLS.
1224 kes Do not file reparse points when restoring a file that already
1227 kes Implement Windows reparse points -- similar to directories, but
1228 we do not descend into it. This is a first cut. They seem to
1229 be backed up, but restore is not yet tested.
1230 kes Remove restore_blocking in tls code when shutting a socket to leave
1231 it in blocking mode. Hopefully this will fix the encryption bug
1232 reported by Frank Sweetser.
1233 kes When opening a file for backup, tell the OS that we are going to
1234 read it sequentially -- optimization.
1235 kes Change variable names in authenticate_director() to not conflict
1236 with member names in bat. Caused great confusion with compiler,
1239 kes Queue openssl error messages in case of comm problem.
1240 kes Do shutdown() call if socket terminated.
1241 kes Remove some duplicated code in tls.c
1242 kes Move more of the bsock member variables into private and access
1244 kes Add Frank Sweetser's tls-test to the regression suite.
1246 kes Add Swedish sv.po file
1248 kes Don't print clock skew message in FD if less than 3 seconds diff.
1249 kes Add a bit of VSS info to status client.
1250 kes Implement a first cut of Vista VSS, using Win2003 code.
1252 Release: 2.1.20 beta
1254 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1255 loaded tape but uses first drive).
1256 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1257 This was indeed a Win32 issue.
1259 kes Simplify search of autochanger for in-use Volume.
1260 kes Fix exit condition of check for in-use volume. kes Remove
1261 inappropriate my_postgresql_free_result() in db_close()
1263 kes Fix bad return in FD when encryption signature not found.
1264 Probably caused a crash.
1265 kes Inhibit missing encryption signature error messages for
1266 file types where no signature computed.
1267 kes Correct inverted check on autochanger in reservation system.
1268 kes Tweak debug code in autochanger reservation.
1270 kes Add some additional locking in the cats directory in subroutines
1271 that modify packet variables called from batch insert.
1272 kes Rework how dcrs are allocated. new_dcr() can now be called
1273 with an existing pointer, and it will simply clean it up.
1274 This allows the reservation system to test various different
1275 devices, and will permit easy device changes.
1276 kes A bunch of changes all over to handle new new_dcr() calling
1278 kes Work more on the Volume management in the SD. Remember Volumes
1279 for tape drives and for autochangers (even virtual disk changers).
1280 kes When looking at the Volume list to reserve a drive, handle
1281 autochanger names correctly by interating through the changer
1282 devices. Also call the Director to see if a Volume is suitable
1283 for the current job.
1284 kes Fix some bugs in bscan. Make sure all media records are written.
1285 Make sure that valid JobMedia records are written for disk files.
1286 Previously they were completely wrong.
1287 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1288 that the URLs don't change and so that the developers will all
1289 work off the same copy. Rebuild from scrach.
1290 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1292 Release: 2.1.18 beta
1294 kes Fix seg fault in FD from incorrect digest size.
1295 kes Fix argument to non-OpenSSL crypto.c subroutine.
1297 Release: 2.1.16 beta
1299 kes Remove a few malloc()s from the encryption code.
1300 kes Use the class calls to bsock in filed/backup.c and restore.c in
1301 place of the old bnet_xxx code.
1302 kes Implement code that does an on the fly calculation of the
1303 signing digest during restore of encrypted files. It makes
1304 a best guess at the algorithm, and if it is not correct, will
1305 then revert to the old code which reads the file after it is
1307 kes Implement at least one missing crypto stream in stream_to_ascii()
1308 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1309 #877 where a reload with bad syntax causes Dir to exit.
1311 Cut: 2.1.14 beta (not released)
1313 kes Do not free a volume on a tape drive until another volume is
1314 mounted and read, or the autochanger unloads the volume.
1315 This should help the SD re-use volumes that are already mounted,
1316 and should fix bug #886.
1317 kes Apply patch from user brettedgar that allows gnome2-console include
1318 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1319 kes Apply patch from Lucien Weller that fixes day of week calculation
1320 because of DST flag problem. Fixes bug #887.
1322 kes Move find_next_appendable_volume() to after acquiring a valid device
1323 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1325 kes Unable to reproduce bug 872. However added additional testing for
1327 kes Bug #874 resolved by documenting SQLite limitations.
1328 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1329 kes Bug #881 resolved by removing typo in mtx-changer script.
1330 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1331 approval. Added a link to the wiki on the web page, and implemented
1332 a backup from http://paramount.ind.wpi.edu
1334 kes Fix update allfrompool to pass pool name.
1336 kes Convert to pure GPL v2 license.
1337 kes Fix sscanf problems reported by Peter Buschman that caused
1338 a bus error on Solaris.
1339 kes Rework (simplify) the select prompt in bat.
1340 kes Move get_jobid_from_tid() into lib and create a
1342 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1343 should definitely fix the problem of lost error messages in the
1345 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1346 kes Eliminate tcpd.h from the project. Enclose the #include from the
1347 library with extern C ...
1348 kes Add print of signal name when a signal is trapped.
1350 Release: 2.1.12 beta
1352 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1354 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1355 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1356 makes SQLit3 run 30 times faster, though a bit less safe.
1357 kes Implement --with-batch-insert in configure and detection of thread
1358 safe libraries. It is on by default, but turned off if no thread
1359 safe library (e.g. SQLite 2) is available.
1361 kes Fix Bacula PostgreSQL buffer overruns.
1362 kes Do better checking for NULL results returned from PostgreSQL;
1363 implement retry for failed queries; clear results buffer after
1364 failed query. Hopefully this will correct the PostgreSQL failures.
1366 kes Implement algorithm to handle only one appendable volume with
1367 Prefer Mounted Volumes = no.
1368 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1369 returned from a query.
1370 kes Make volume lock recursive.
1371 kes Implement an additional volume reservation algorithm that
1372 starts by considering all reserved volumes then uses the
1373 old brute force algorithm of searching the resources to
1374 find a suitable device.
1375 kes Add new reservations debug code and refine the old code.
1376 kes Update the win32/dll/bacula.defs file.
1378 kes Tweak reservations algorithm to permit a few more cases, i.e.
1379 volume reserved, but on different drive, ...
1380 kes Enhance SD status to include Pool and Media Type for drive in a
1381 more readable format (a bit longer).
1382 kes Fix PostgreSQL double free.
1384 kes Minor refactoring of restore decryption code.
1385 kes Add code to smartall.c to detect double free of a buffer.
1387 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1388 so that bsmtp will create a correct email address (mailbox only).
1389 kes Modify 'memory' command so that the buffers are listed as 'In use'
1390 to avoid confusion with Orphaned buffers.
1391 kes I reworked the OpenSSL include/lib flags to be handled in
1392 the standard Bacula way, which should fix bug #863 concerning
1393 non-standard OpenSSL libraries.
1395 kes Implement Help Browser window for bat.
1396 kes Fix reload bug that reset StorageId to zero.
1398 kes Fix TLS #ifdefing when TLS turned off.
1399 kes Ensure that when labelling a tape with Slot=0 that InChanger
1401 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1403 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1404 add DISTINCT (required by PostgreSQL).
1405 kes Implement BSOCK authenticate_director() method. Eventually will
1406 authenicate all daemons.
1407 kes Move several more functions into the BSOCK class.
1409 kes Add code to tell the OS that we no longer need a cached
1410 file that we were reading. In findlib/bfile.c. Also,
1411 only cache files that we are reading. Thanks to
1412 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1413 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1414 kes Implement script to automatically generate cats and dll .def
1415 files for Win32 dll.
1416 kes Update README.mingw32 to include new .def file generation.
1417 kes Correct typo in UTF-8 error message as reported by:
1418 jhernandez <julianhernandez@gmail.com>
1419 kes Add additional sm_check() code on debug level 1.
1420 kes Set default debug level to 1.
1421 kes Trap SIGABRT in attempt to get traceback.
1423 kes Reduce bat connect timeout from 30 to 15 seconds.
1424 kes More restructuring and implementing BSOCK class in place of
1426 kes Remove a few unnecessary malloc() tests in crypto code.
1427 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1428 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1429 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1431 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1433 kes Fix Verify InitCatalog. The attributes were not pointing to the
1434 correct saved location.
1435 kes Implement message callback so that GUI is sure to get all
1436 daemon messages. Currently displayed in a dialog in bat.
1437 kes Ignore SIGUSR2 (Bacula timer) in bat.
1438 kes Apply regress patch from bug #859 to allow regress to work
1439 with Solaris compiler.
1441 kes Begin adding TLS support to bat.
1442 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1443 clean up lex.c and make it more readable.
1445 kes Move more bnet functions into the BSOCK class.
1446 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1447 kes Complete change of berrno strerror() method to bstrerror()
1449 Release: 2.1.10 beta
1451 kes Cleanup incorrect email addresses in bsmtp.
1452 kes Make bat display initial messages rather than discard them.
1454 kes First cut of adding .mod to the run command.
1455 kes Implement auto display of messages in bat.
1456 kes Enhanced preferences to allow all Bacula output to be
1459 kes Try to make bsmtp date routines more generic.
1460 kes Fixed bug #856 autochanger documentation.
1461 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1462 kes Add new cats entry point so Win32 builds.
1464 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1466 kes Do better checking for the MySQL 64 bit libraries looking for both
1467 .a and .so libraries.
1468 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1469 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1470 kes Require the thread safe version of MySQL during configure. Thanks
1471 to Andre Noll for pointing this out.
1472 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1473 continuing in migration code.
1474 kes Apply implementation of tray-monitor font derived from gnome-console
1475 submitted by Andreas Piesk <a.piesk@gmx.net>
1477 kes Eliminate important memory loss in SQLite
1478 kes Fixed the batch insert MySQL thread specific data that was not
1479 being freed. See cats/mysql.c:db_thread_cleanup().
1480 kes Fix restore before command.
1481 kes Convert old hdr.name to name() in a few places.
1482 kes Implement update jobid command.
1483 kes Return all time_t dates in db_get_job_record()
1484 kes Stop watchdog in SD earlier.
1485 kes Put Pool just after Storage in please mount message.
1486 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1489 kes Update the po files.
1490 kes Fix Verify InitCatalog by making it cache attributes.
1492 kes Change name bacula-bat to bat for man 1 page to correspond to
1494 kes Check for client and store NULL pointers in status command. This
1496 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1497 kes Fix sign extended editing of %p.
1498 kes Clean out a little old #ifdefing in cats/mysql.c
1500 kes If time diff between DIR and FD is more than 600 seconds convert
1501 INFO message to WARNING.
1502 kes Implement heap size display in status for all daemons.
1503 kes Attempt to fix MySQL db open memory loss (not successfull).
1504 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1505 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1506 Query. This looks like a MySQL but but by doing extra releases,
1507 the memory goes away. This should fix bug #847.
1509 kes When backup fails, cancel SD before waiting for sd termination.
1510 kes If SD is waiting for FD to connect during cancel, wake up the
1512 kes Fix fsf code so that errno is correctly reported.
1513 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1515 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1516 so that Bacula doesn't later stumble into a seg fault.
1517 kes Use the term Restore Client in the restore Job report.
1518 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1519 the original job's FileSetId.
1520 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1521 spooling in migration jobs. Not yet tested.
1522 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1523 reading conf file from a pipe. However, do it with open_bpipe()
1524 rather than popen. Not yet tested.
1526 kes Fix an ugly bug where the VolCatBytes were getting updated
1528 kes Implement bconsole memory command that prints current memory
1529 usage, plus smartalloc dump.
1530 kes Clarify some error messages in backup, admin, and migrate.
1531 kes Shrink label dialog to smaller size.
1532 kes Invert Cancel OK buttons on restore to be OK Cancel.
1533 kes More strerror() to bstrerror() conversions.
1535 kes Start implementing bstrerror() in place of strerror().
1536 kes Stripping path -- seems to work.
1538 kes Prevent door and port files from being restored (mostly
1540 kes Free an unreleased buffer in compat code.
1541 kes Change console Job name from *Console* to -Console- to eliminate
1542 Win32 filename problems. Put Win32 path separator when creating
1543 Console file. This fixes bug #846.
1544 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1546 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1548 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1549 to force Win32 error message.
1551 kes First cut strip path. The data should be passed to the FD,
1552 but nothing is done with it yet.
1553 kes Enhance the digest and signature routines in the crypto
1554 library to accept a JCR and to use it to print error messages
1555 so that they will go in the Job report rather than the daemon's
1557 kes Simplify some of the verify signature code.
1558 kes Simplify a few of the alternative returns in the signature
1561 ebl Use only POSIX regex instead of GNU regex in breg.c for
1562 File relocation. It fix broken freebsd compilation.
1563 kes Convert all other Dir files to use new ua class message
1565 kes Tentative fix for missing digest signature in bug 807.
1566 kes Correct handle problem in new win32_ftruncate routine.
1567 kes Convert ua_purge.c and ua_update.c to use new ua class
1568 message routines for bat.
1570 kes Correct incorrect installation of LICENSE in Win32 installer.
1571 kes Display LICENSE at the beginning of the Win32 install.
1572 kes Attempt to correct the need for the png files to be installed
1574 kes Reapply my bat.conf install script in qt-console. I think I
1575 editted bat.pro instead of bat.pro.in and it was lost.
1576 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1577 the /var/lock/subsys for subsysdir. Also corrects typos in the
1580 kes First cut update job.
1581 kes Correct configure to include qmake of src/qt-console directory.
1583 kes Make restore job yes/mod/no print in one command so GUI works.
1584 kes First cut implementing backup and restore client.
1585 kes Correct editing in Verify output that caused a seg fault.
1587 kes Insure that bat.conf is not overwritten during installation.
1588 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1589 while I was implementing migration in March 2006 !
1591 ebl Cleanup file relocation, using char *RegexWhere instead of
1592 char *where + bool where_use_regexp
1593 kes Update some manpages and add bat manpage.
1594 kes Make a first cut at converting bacula.spec.in for bwx-console
1596 kes Apply patch from John Goerzen to add hostname as fourth argument
1597 to make_catalog_backup script.
1598 kes Fix typos I introduced into bsmtp.c
1599 kes Make pm_strxxx() routines handle input of NULL pointer. This
1600 is to protect from NULL pointers returned from SQL databases.
1601 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1602 kes Add more debug to FIFO code -- fix fifo regression test.
1604 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1605 kes Add thread timer to bnet_connect() to break from OS if wait time
1608 kes Update Win32 build to include new files, new symbols, and
1610 kes Implement socket level heartbeat (tcp_keepidle)
1611 ebl Commit File relocation patch
1612 kes Make bat have 'make install' target.
1613 kes Warn during install if old gnome-console binary found.
1614 kes Warn during install if old wx-console binary found.
1615 kes Add -8 option to bsmtp command line to add content type utf-8.
1616 Fixes bug #809. (Character coding problem in bsmtp).
1617 kes If < is found in target (from, to, cc) then do not enclose the
1618 target in < > in bsmtp. Fixes bug #772 (malformed address).
1619 kes When printing certain items in dbcheck, stop after 300000.
1620 Fixes bug #822. (dbcheck loops).
1621 kes Incorrect status in Dir after waiting for mount with poll set.
1624 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1626 kes Print waiting to reserve a device every 5 mins.
1628 kes Don't call close_part in label.c if tape and relabel.
1629 kes Don't free volume if busy in close() -- should help with
1631 ebl Fix #824 RunScript bug (After script could be execute twice)
1632 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1633 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1634 Add a regression script to test RunScript
1636 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1639 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1640 deprecated. No additional bugs will be fixed, and they will be dropped
1641 in a future release (probably 2.4.0).
1642 kes Change name of wx-console to bwx-console to make it more Bacula
1644 kes Change the name of gnome-console to bgnome-console to make it
1647 kes Some time in March, a Feature Request with patch from Jorj Bauer
1648 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1650 The ability for the director to validate a Client (FD) CN against
1651 an arbitrary set of patterns rather than the hostname, with
1652 A new 'TLS Allowed CN' set of directives which are implemented
1653 in the Client resource. Then pattern matching is used in place
1654 of hostname matching against the Certificate's CN. As an example, we
1655 have certificates which (a) use a local CA, and (b) have a CN of the
1657 kes Add new/changed entry points to Win32 build
1658 kes Create unaccepted-projects for projects that are not accepted.
1659 kes Simplify locking in the reservations system.
1660 kes Add more debug code in reservations.
1661 kes Make sure error condition on reserving a volume is handled correctly.
1662 kes Correct handling of volume_in_use.
1663 kes Correct handling of initializing a device.
1664 kes Move handling of broadcasting releasing a device into release_device().
1665 kes Correct attaching dcr to dev so that it is only done if device
1666 is properly initiated.
1668 kes Locking debug level tweaks in SD.
1669 kes Tweak new Volume code.
1671 kes Add exec external-command [wait-seconds] to bconsole. This
1672 executes the external-command. Note! normally external-command
1673 should be enclosed in double quotes.
1674 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1675 it should normally be off in a production system.
1677 kes Implement die command for SD so that we can force it to dump.
1678 kes Implement SD lock debug code.
1679 kes Implement new algorithm for keeping Volume list in SD. It
1680 is now owned by the device.
1682 kes Implement new code for freeing in use volumes that should
1683 resolve if not all, some of the problems of multiple drive
1684 tape conflicts described in bug 801.
1686 kes Fix gui/bacula-web/images files in svn.
1687 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1689 ebl Fix a bug in batch mode (in string escape)
1690 kes Correct migration prune SQL typo that crept in in a
1691 recent 2.1.x change.
1693 kes Move bnet_despool() into class in bsock.c
1694 kes Modify job report to include director name and Build OS.
1695 kes Move drop root privilege and check_catalog() before fork.
1696 kes Add update database scripts (version 9 to 10) to updatedb directory.
1698 ebl Check size and age of each file after its backup to see if
1699 it has changed during backup, if 'checkfilechanges' is set.
1700 The FD will do an extra check (stat(2)) after
1701 each file backup. mtime, ctime and size are compared with
1702 'before backup' information. If time or size mismatch, an
1703 error message will be generated. You must upgrade FD to use it.
1705 kes Make database name and user configurable
1706 --with-db-name=xxx --with-db-user=xxx
1707 kes Add back database type to message.c for debugging.
1709 kes Implement dir_sql() which issues an SQL query.
1710 kes Modify bat medialist to use dir_sql() and do some minor C++
1711 formatting as well as eliminating a number of pointers, simplifing
1714 kes Fix some of the mtx-changer grep commands for tape label readers.
1715 kes Convert a number of bsendmsg into the appropriate send/warning/error
1716 message class calls.
1717 kes Suppress the using database message in the .sql command.
1718 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1720 kes Add context menu for floating a window.
1721 kes Some minor cleanup and name changes in qt-console
1722 kes Add doing mt setblk 0 in Win32 mtx-changer.
1723 kes Apply Martin's bug fix to move definition of ENODATA for
1725 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1726 sqlite2 and sqlite3.
1728 kes More pruning cleanup.
1729 kes Turn on wait_for_drive by default in mtx-changer.
1730 kes Turn on Batch insert code by default as it now passes regression.
1731 kes Add ./configure --enable-bat to enable building of Bat.
1732 No install yet though.
1734 kes Implement a new .sql command for bat.
1735 kes Implement code to turn off pruning in obtaining the next volume.
1736 Pruning is turned off for the status dir command, but turned on
1737 for SD requests and for the list nextvolume command.
1739 kes Correct Qmsg() that was not updated correctly when committing a
1740 previous change (probably the recent TLS patch).
1742 kes Write new subroutine is_volume_purged() that explicitly checks
1743 if the Volume is purged, and if so marks it as such. This should
1744 resolve problems reported about needing to mount twice to recycle
1746 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1747 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1748 amount of duplicated code.
1749 kes Do volume pruning only for the Media Type desired (reduces pruning time
1750 if multiple Media Types are in the same pool).
1751 kes Implement more detailed info in the Job report for the Bacula version
1753 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1755 ebl Add bbatch tool to bench database and insert mode.
1756 Fix sql quote stuff in batch mode
1757 Fix sql stuff for mysql
1759 kes Correct problems with am/pm scheduling. Fixes bug #808.
1760 kes Implement new prunning code that prunes up to 1000 jobs at
1761 the same time. The same technique can be applied to a number
1762 of other prune/purge subroutines.
1763 kes Add an insanity check when starting a new tape job to ensure
1764 that the tape position has not been changed. If so fail the
1766 kes Fix Win32 build for dlls to add the folllowing:
1767 src/lib/bsock.c -- new file with new entry points
1768 src/lib/dlist.c -- new entry points
1769 src/cats/sql_create.c -- new entry point
1770 src/cats/sql_cmds.c -- new DATA item exported
1772 ebl batch mode cleanup bscan-test is ok now.
1773 kes Implement SD code to check length of disk volume before appending.
1775 kes Correct return status on db_batch... routines.
1776 kes Add call to db_write_batch_file_records() to migration code.
1777 ebl Fix AfterJob timing
1778 kes Move the checking of the database in initializion of the Director
1779 to after we drop privileges. This avoids the need for both root
1780 and bacula access to the DB.
1781 kes Correct a misplaced variable definition in src/filed/backup.c
1782 kes Correct how the new batch insert db_create_attributes_record()
1783 uses the arguments. Caused a seg fault in bscan.
1784 kes Implement lock() and unlock() methods in DEVICE class.
1785 Implement block() and set_block(xx) methods in DEVICE class.
1786 kes Modify bnet_connect() so that it uses time() to check for the
1787 wait time expiring (on some OSes, some system calls may not
1788 return immediately).
1789 kes Modify Verify to obtain the previous JobId when it is actually
1790 running rather than at schedule time (as it was in 1.38.x).
1791 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1793 kes When checking pid in pid file, continue running if the pid is
1794 the same as ours. This occurs on IRIX after a system crash.
1797 kes Extend new GUI API.
1798 kes Make the ua structure a class, and implement send_msg(),
1799 error_msg(), warning_msg(), and info_msg().
1801 kes Apply fix from for building wx-console on the Mac from
1803 kes Implement new select mechanism for GUI programs.
1804 kes Reorganize initialization of stackedWidgets in bat.
1806 kes Add updated nagios plugin supplied by Christian Masopust.
1808 kes More bat implementation.
1809 kes File migrate bug with Pool Occupancy using mediaid instead
1810 of jobids. Fixes bug #795.
1811 kes Fix orphaned buffers in filed backup and verify due to
1812 crypto buffers not freed during errors. Fixes bug #789.
1813 kes Extend new GUI api code to tree commands.
1814 kes Ensure that tree and dot commands check console ACLs.
1815 kes Permit marking directory with trailing slash.
1816 kes Allow 20 console connections (instead of only 10).
1818 kes Add smartctl call to bacula-sd.conf as an example of getting
1821 kes Modify jobq.c to let simultaneous restore jobs run. This may
1822 cause them to fail if they cannot get a drive.
1823 kes Add Client Connect Wait to Storage daemon to permit users to
1824 modify the time the SD waits for a FD connection.
1826 kes Correct virtual changer check which was backwards. This caused
1827 volumes to be unloaded into slots already occupied.
1829 kes Apply Command ACL filter to JobId list in restore command.
1830 kes Correct typeo in var.c patch.
1832 kes Don't let Bacula prune File or Job records for the current Job.
1833 kes Fix variable substitution pad + inc bug reported (with patch)
1836 kes Correct SQLite log table index as reported by Luca Berra.
1838 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1840 kes Begin implementing new comm signals for API.
1841 kes Fix a few places in lib/message.c where the open fd may
1843 kes Continue implementing lib/bsock.c (real class). Make jcr,
1844 who, host, and port private. There are new methods to access
1845 them for non-class use. This required touching a number of files.
1847 kes Add LANG=C to autoconf/randpass so it works with languages other
1848 than English. Fixes bug #788.
1850 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1852 You will not be able to generate Include/Exclude list any more.
1853 It will be fixed soon.
1854 If you want to use this, you can apply
1855 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1857 kes Restore of sockets created false error messages because Bacula
1858 no longer restores sockets, but the code was still trying to
1859 set the attributes on a non-existent file. Reported by a user.
1860 ebl finish RecyclePool feature
1861 Media will takes Pool.RecyclePool
1862 when moving from Scratch to a Pool or when user will do
1863 update volume=xxx frompool
1864 To use it, add RecyclePool = aPool to your Pool resource
1867 RecyclePool = Scratch
1871 kes Expand new BSOCK class adding signal() and new BNET signals.
1872 kes Begin enhancing the dot commands adding a new API function
1873 that returns more information and will make it easier
1874 to interface to the Director from a program.
1876 kes Make DEVICE fd private. Its new name is m_fd, and can be
1877 obtained with dev->fd() outside the class. This is the
1878 first of many DEVICE members to be made private.
1879 kes Implement Michael Renner's idea on having a virtual disk
1880 changer. I made some minor modifications (e.g. I did not
1881 implement the Virtual Changer directive, but simply set
1882 the Changer Command to an empty string.
1884 kes Implement a BSOCK send() method that writes the whole record
1885 in a single write() request rather than in two.
1886 ebl add update volume=xxx recyclepool=yyyy
1887 volume takes recyclepool from pool when using update volume=xxx from pool
1889 kes Fix encryption deblocking bug, which caused some restored files
1890 to be truncated. This fixes bug #763.
1891 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1892 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1894 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1895 ebl Use btime_t instead of uint64_t in media patch.
1897 kes Optimize the use of the database a bit in the Status dir command.
1898 Only open it when needed, ensure that if any previous database
1899 was opened, it is closed.
1901 kes Correct VolCatBytes bug from media patch.
1902 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1903 in the case of orphaned records.
1904 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1905 and File records in 300K chunks to be more efficient. This
1906 idea came from Juan Luis Frances (if I remember right).
1907 kes Apply Eric's scratch patch that moves a purged Volume to
1908 the RecyclePool. Question: how is RecyclePool set? what
1909 happens to the ScratchPool?
1910 kes Apply Eric's media patch that collects read/write media
1911 times as well as byte counts. This patch requires a
1912 simultaneous upgrade of the DIR and SD. Note, there
1913 should be some way to turn off timing. I'm not sure
1914 times are in Bacula units.
1915 kes Apply Eric's batch-insert patch.
1917 kes Update projects list.
1919 kes Implement Include/Exclude file lists in FD as dlists using
1920 the new dlistString class. This permits efficiently having
1921 large include/exclude lists and completes project Item 25.
1922 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1923 console is authorized to cancel the job. This fixes bug
1925 kes Modify SD so that the VolCatJobs medium record is updated
1926 at the beginning of a Job rather than the end. This
1927 fixes bug #775 where exceeding MaxVolJobs caused jobs
1929 kes Added a mutex around getting and setting Volume information
1930 so that multiple simultaneous jobs will single thread.
1932 Switch to using Subversion
1933 kes Remove src/pygtk-console/ from configure
1935 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1936 plus the entrypoints.
1937 kes Apply patch supplied that corrects debug print
1938 in canceling jobs for max run time. Supplied as
1939 part of bug #621, which was previously fixed.
1941 kes Test on job_canceled() and sd_msg_thread_done inside
1942 loop starting the message thread to avoid a race condition.
1944 kes Remove rl_catch_signal from console.c as it conflicted
1945 with the header definition. Fixes bug #765.
1946 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1948 kes Clarify some stored/acquire messages to indicate if the
1949 problem is with read or append.
1951 kes Fix memory leak with storage ids in cats/sql_get.c
1952 kes Terminate watchdog earlier to avoid reference to released
1953 memory -- reported by Jason Austin.
1954 kes Move closing the database from jobq.c to the director daemon
1955 termination routine. This fixes memory leaks for shadow jobs
1956 (i.e. migration jobs).
1957 kes Free up the unique jobid chain items in migrate.c. This fixes
1958 a memory leak problem.
1959 kes Convert some ugly looking for statements to use foreach_alist
1960 in findlib/find.c. This will facilitate converting the structures
1961 to use dlist (for large include/exclude lists).
1962 kes Fix a bug in the btree.c and btree.h routines, then rename them
1963 rblist and add them to be built in src/lib. Include some new
1964 methods written by Rudolf Cejka that make the code more readable
1965 (hides some of the ugly casting).
1966 kes Add set_next() and set_prev() methods which make the code much more
1967 readable. Also add a new dlistString class that facilitates storing
1968 strings in dlists. To be used in the large include/exclude lists.
1969 kes Make some trivial modifications to lib/tree.h that use rblist
1970 rather than dlist for storing the tree links. This was suggested
1971 by Rudolf Cejka. The result of this is that the restore tree now
1972 uses red-black binary trees rather than simple linked lists. This
1973 should give rather dramatic speed improvements for directories
1974 contining large numbers of directories/files (more than 10000).
1976 kes Fix maxruntime bug #621.
1978 ebl Implement the include JobID in spool file name project.
1979 kes Reorder projects file in order determined by Jan 2007 vote.
1980 kes Implement item #12 on project list -- quick release of FD by
1982 kes Fix open of SQLite3 db where user does not have write permission
1983 so that DIR does not crash. Fixes bug #761.
1985 kes Add back missing @ in Win32 Makefile.
1986 kes Change 'Device not configured to autolabel' from INFO
1988 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1989 which should restart an indefinite # of times.
1990 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1991 other DIR specifications.
1993 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1994 Fix path quoting in SQLite scripts.
1995 Fix problems with SHGetFolderPath.
1997 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1999 kes Fix Job restart on error bug that promotes an Inc to a Full
2000 backup. This should fix bug #755.
2001 kes Add qt-console and first cut of code.
2005 kes Fix Bacula->Documentation link on Win32 to point to index.html
2006 instead of bacula.html. Fixed bug #750.
2007 kes Return JobId in db_get_job_record() when JobId==0. This should
2009 kes Do not release source pointers when restarting a failed job.
2011 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2012 This *should* fix bug #747.
2013 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2016 kes Modify USTORE constructor to set an empty store_source string,
2017 and don't copy the store_source string in a cancel. Hopefully
2018 this will fix Arno's seg fault, bug #744.
2019 kes Add back code to disable conio in configure. Fixes bug #743.
2020 kes Correct the Options scanner in the FD to correctly handle
2021 SHA1 option, which was eating the next option. Reported by
2023 kes Add code to indicate when the SD is spooling, spool wait, and
2024 despooling as requested by Alan Brown.
2026 Version 2.0.0 released: 4 January 2007