1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
31 separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
36 kes Fix a Verify InitCatalog problem where in certain cases
37 a garbage filename may be entered in the verification database. This
40 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
41 sent in by Riyas Yoosuf.
43 kes Fix seg fault in Dir during estimate command with no level value
44 given. This fixes bug #1140.
46 kes Add message to migration job when the target job is already migrated.
47 This closes bug #1129.
50 kes Raise some restore debug levels.
51 kes Replace off_t by boffset_t where ever I found it.
53 kes Define a machine dependent ioctl request type for use with
56 kes When a migration job actually runs, re-check the Job record
57 and skip if the job is already migrated. This should
58 significantly reduce the problems with bug #1129.
60 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
61 turn off glibc checks that prevent getting good dumps.
62 kes Implement console 'wait mount' command. Doesn't yet work.
63 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
64 kes Break the do_swapping into do_unload, do_swapping, and
65 do_load. It is much more logical that way.
66 kes Implement a set_dcr_from_vol subroutine in acquire.c for
67 reading volumes. This allows the dcr to be refreshed after being
68 zapped when the wrong volume is mounted.
69 This should fix bug #1126 -- During multiple tape restore, bacula
70 does not ask for physical tape change, but rereads same tape
72 kes Apply patch submitted for bug #1107 with a small modification.
73 This fixes a bug where bcopy copied too many records.
74 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
76 kes Make the default bat restore Pool be Any. This fixes bug #1118.
78 kes Remove debug statement that crashes the SD at the end of
79 a tape during restore. Fixes bug #1125.
81 kes Implement Win32 bat changes made to Branch-2.4
83 kes Tweak separator command in console to start disabled and
84 allow defining no separator character. Also make code a
85 bit more fault tolerant.
86 kes Make btraceback write the traceback to the working directory
87 before attempting to mail it.
88 kes Add a RFC to Projects.
90 kes Attempt to implement a kludge to make Qt work with bat
92 kes Setup rstorage correctly. Virtual backups are working.
94 kes Move setting JobLevel and JobType into a method, which should
95 allow completing Virtual Backups.
96 kes Fix verify jobs to work again.
98 kes Virtual Backup tweaks -- it is close to working.
100 kes Ensure that SD tried to mount a volume not in an autochanger
101 at least once before asking for operator intervention.
102 kes Make SD aware of Virtual Backup jobs.
103 kes Add VirtualFull for bat.
104 kes Changes to get read storage correct for Virtual Backup.
106 kes Remove old code from label.c
107 kes Split display_display_info() out of write_bsr_file()
108 kes do_vbackup_init() working -- i.e. bootstrap file built.
109 kes Change Bacula trademark owner from John Walker to Kern Sibbald
110 kes First non-working cut of vbackup
111 kes Correct FD heartbeat code to use volatile variable accessed by
113 kes Zero thread id with memset if on Win32 in case it is a struct.
114 kes If cannot create JobMedia record, continue to try to write eof
115 and clean up in block.c
117 kes Add code to interface OpenSSL to new Win32 pthreads code which
118 used a structure for thread_t.
120 ebl tweak bat for win32 compilation
122 ebl Remove tokyo cabinet from the source
123 ebl Update configure/autoconf to support berkeley DB
124 ebl Add a sort to db_get_file_list() to improve bsr construction time.
126 kes Add a mtx-changer.conf file that is not overwritten during
127 an upgrade. It fully configures the mtx-changer script.
128 kes Clear in-use bit on vol when unused while swapping.
130 kes Remove sleep at end of ./bacula
131 kes Clear hash packet for hardlinked files correctly. This corrects
132 a long standing bug where hardlinked files selected individually
133 would occasionally not be restored.
135 kes Apply Eric's patch to ensure that autoprune does not return
136 a Volume not in the autochanger unless requested to do so.
137 kes Correct bat restore display of multiple drives. This fixes
139 kes Do find_a_volume() each time an unload is done. This
140 fixes the failure of maxvol2-test.
142 kes Add some SD debug code.
143 kes Do find_a_volume() each time an unload is done.
144 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
145 and adds --with-db-port to ./configure.
146 kes Use Qmsg() in job.c watchdog callback.
148 kes Release main control rwlock if ABORTing.
149 kes Make watchdog connect timeout queue messages rather than sending
150 directly to avoid lock conflicts with the real thread.
151 kes Add const char in dbd.c to avoid compiler warnings.
152 kes Fix python compiler string warning. Note, IMO the GNU C++
153 compiler guys have made a *very* bad change to their compiler.
154 They now force all strings to be 'const' unless you explicitly
155 cast them, which is extremely ugly and ruins nice code as well
156 as creates a lot of useless work.
158 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
159 mt. This fixes bug #1116.
160 kes Add const in python files to reduce compiler warnings.
161 This may have to be backed out because of later compiler
163 kes Fix failure of 2drive-concurrent-test. Always read label;
164 clear_unload() only after drive is defined in acquire_for_read().
166 kes Generally clean up the manual tape loading code. The main
167 conceptual change is that when a volume is marked to be unloaded,
168 its volume name is retained, and it is only marked as unloaded
169 when either the autoloader says it is unloaded or another tape
170 is read on that drive.
172 kes Add debug code and refactor subroutine in stored/mount.c
173 kes Fix format problem in bscan output reported in bug #1105.
174 ebl Fix get_next_volume_for_append logic with autochanger
175 - use pruned volumes if found
176 - don't reset the inchanger flag after getting a recycled volume
178 Fix recycle_oldest_purged_volume to take InChanger flag in account
180 ebl Add mmap/unmmap implementation for tokyodbm under win32
182 kes Make first step toward eliminating globals from config
183 scanning. Also should be a workaround for FORTIFY_SOURCE
184 GNU C bug -- fixes bug #1042.
186 kes Apply duplicate job tests to restarted jobs.
187 kes Copy more data when restarting a job so that run
188 overrides are kept. This should fix bug #1094.
190 kes More word alignment cleanup.
191 kes Fix bug where SD did not ask operator if the device could not
192 be opened. Reported by Eric.
194 kes Add dbuser to DIR conf file (replaces user).
195 kes Add --with-db-password to ./configure
196 kes Fix regress to handle db_password.
197 ebl Add new "status storage slots" that list autochanger
199 ebl Update vtape driver to compile only under Linux.
200 ebl Fix a bug when restoring with a wrong mediatype.
202 kes Eliminate ints from conf files and structures to avoid
203 word alignment problems
205 kes Fix bug reported by Scott Barninger where the bacula script
206 refers to scripts in the wrong directory. Needed to meet the
207 requirements of recent FHS location changes.
208 ebl Disable vtape for FreeBSD.
210 ebl Modify disk-changer to check if slot contains something before
213 ebl Fix vtape on win32 and debian.
214 ebl Fix autoselect patch (cause segfault).
216 ebl Fix autoselect option broken for a while. Fix #1089. Need some
217 work with StorageId to be able to use a particular drive in a
220 ebl Rename vtape to vtape.
221 ebl Update vtape driver.
223 ebl Modify vtape driver to avoid sparse file.
224 kes Add make clean of qt-source directory during ./configure
225 kes Store last block number written to tape in DEVICE and
226 use it for testing for correct last block on EOT.
228 Release Version 2.4.0:
232 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
233 This fixes bug #1095.
235 kes Add create_postgresql_database.sql to Win32 installer. Should
236 fix problem reported by Juilio Monteiro.
237 kes Get correct slot when auto unloading a device. This fixes bug
240 kes Fix multiple media restore.
241 kes Make DEVICE Slot private and access it via a method.
242 Allows better control over when it is set and cleared.
243 kes Fix possible seg fault if SQL error.
245 kes Add Martin's fixes to argument scanning for the estimate
246 command. This fixes bug #1093.
247 kes Add debug code to SD.
248 kes Fix renaming a Volume, which used the wrong Volume name.
250 kes If operator has rewind tape, print warning, release tape and
251 try once more. If tape is positioned somewhere, something went
252 wrong, so mark the tape in error and try once more. Previously
253 this error was fatal, now it produces an error message.
254 kes Ensure correct volume name displayed during restore
255 kes Ensure that Volume is mounted for restore.
257 kes Fix a few more Coverity reported problems.
259 kes Apply Allan Black's status dir job count patch.
260 ebl Add information about IMPORT/EXPORT slots in mtx-script.
261 kes Enhance a couple of SD debug messages.
262 kes Tweak unload flag setting and ensure it is set during swap.
264 ebl Fix #1091 about bad output in estimate command.
266 kes Modify autochanger locking to attempt to avoid race
268 kes Make sure device not busy before doing label command.
269 kes Display open() errors except when polling. Previously too
270 many were suppressed. This should fix bug #1070.
271 kes Fix Win32 reparse points. Bacula will not recurse into any
272 reparse point directory, including mount points, unless the
273 directory is explicitly mentioned at the top level (same as
274 with Unix). A file that is linked to another file will be
275 backed up -- much as Unix does for hardlinked files.
276 This fixes bug #1041.
278 kes Remove double quotes from ChangeLog and ReleaseNotes
279 kes Remove StorageId test when pruning and recycling (Eric's changes).
280 kes Remove old form of locking when getting volumes -- causes deadlock.
281 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
282 the name unique and to eliminate compile time error.
283 kes Add accurate.o to Win32 FD Makefile
285 kes Fix cats dll build on Win32 after db_update_job_end_record
286 calling sequence change.
287 ebl Switch to tokyo dbm instead of htable in accurate code
288 ebl Include tokyo dbm to bacula source tree
290 kes Fix buffer overruns detected by Coverity.
292 kes Tweak joblog display.
294 kes Implement --without-qwt
295 kes Fix layout of restore tree dialog
296 kes Add configure bat QWT libraries, so that bat can be built
297 with or without the QWT libaries.
299 ebl Add dummy tape driver for regression tests.
300 kes Make sure we unload the right slot when swapping.
302 kes Add debug times, reduce size of two-pool-changer test
304 ebl Tweak autoconf scripts for vtape
306 kes Improve SD reserve debug code.
307 kes Testing an improvement to free up volumes no longer in use.
309 kes Rework SD acquire for read to handle autochanger Volume
311 kes Implement regression that explicitly tests swapping a Volume
312 from one drive to another.
313 kes Enhance disk-changer to detect most error conditions.
314 kes Fix SD code so that it properly swaps a Volume between drives.
315 This fixes bug #1083.
317 kes Apply libdbi patch from Joao Freitas for regress and for
318 Bacula trunk. Regress now works with libdbi. Nice.
319 kes Apply .nobackup patch from bug #1077 submitted by
321 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
322 name into jobs cloned via the run directive.
324 kes Prevent a Volume that is being swapped from being freed from
325 the volume list. This will most likely fix, at least partially,
327 kes Fix strippath so that it does not get a buffer overrun and crash FD.
328 This fixes bug #1078.
329 kes Remove 50 millisec wait in SD that broke debugger.
330 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
331 that a job may run, counted from when the job was scheduled.
332 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
333 a job may block waiting for a resource, counted from when the job starts
334 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
335 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
336 that implements multiple commands per line in the console when using
337 readline. Modify the default to use a semicolon as the command separator.
339 ebl Fix SQL query in migration code.
340 ebl Make accurate mode with hash disk pass regression tests
342 ebl Implement first cut of accurate backup with hash disk.
344 kes Force unload of volume when wrong volume mounted in SD.
346 kes Fix bat seg fault at termination.
347 kes Add Bacula generated version to bat about box.
350 kes Experiment with allowing multiple read jobs.
351 kes Move final volume swapping code to DCR method and
352 call it from acquire_for_read().
353 kes When wrong volume is mounted during read, unload_autochanger.
355 kes Integrate the libdbi changes from Joao Henrique Freitas
357 kes Stop searching for Volumes in SD askdir if DIR returns the
358 same volume name twice in a row.
359 kes Close bat console windows first to eliminate error message
362 kes Tweak the swap Volume from one drive to another code so that
363 it now seems to work.
364 kes Resolve several problems with recycling that broke the new
365 code (these problems are in 2.2.9 as well).
366 kes Remove the volume lock when calling the sysop code.
367 kes Don't mark a reserved volume with no writers as unused otherwise
370 kes Rework class structures for VOLRES, DCR, and DEVICE to make
371 the method names a bit more logical, and for more logically
372 handling the responsibilities.
374 kes Remove redundant code in terminating the scheduler that just
375 causes a seg fault in many cases.
376 kes Cleanup releasing a volume and make it a DCR method.
377 kes Improve algorithm for detecting pre-reserved volume and
380 kes Tweak volume swapping code so it works.
381 kes Correct name overloading in mount.c
382 kes Replace released flag in VOLRES with reserved and add access
383 methods for the VOLRES class.
384 kes Prevent volume from being released while being swapped.
385 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
387 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
389 kes Refactor parts of stored/mount.c
391 ebl Add sanity checks for VolWriteTime and VolReadTime
392 ebl Take care of bad clock changes while computing VolWriteTime
393 and VolReadTime. This should fix or limit #1066
394 kes Correct error string numbers in dird/catreq.c
395 kes Restructure reserving, acquiring, and mounting volumes. Calls to
396 autochanger are deferred for mount.c -- simplifes the code.
398 kes Do not prune any running job. It just fails the job.
399 kes Lock the volumes when changing dev->reserved_device and marking
400 the volume unused otherwise the device can get reserved by
401 another job before the volume is released, thus blocking it.
403 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
404 kes Fix bug #1063, reuse of freed ptr in list nextvol.
405 kes Release regex compile buffer in filed/job.c
406 kes Add proper type of const char in sql_create.c
407 kes Turn off debug in daemon termination routines
408 kes Move free_volume_list() before devices are freed in stored.c
409 kes Fix reference to uninitalized stack variables in bregex.c.
410 This should correct bug #1067.
412 kes Fix possible seg fault in SD when freeing a volume entry.
414 kes Implement unload_dev() before swap device.
415 ebl Add statistics prunning with option and menu
416 kes Separate unload_dev() from unload_other_device() in autochanger.c
418 kes Apply patch from bug #1069 that corrects spurious error messages
419 when ACLs enabled on SGI but no ACL exists.
420 ebl Fix small segfault in bacula-sd when debug level is 500
421 kes Modify run_program() and run_program_full_output() to use
422 call by reference for the results string. This corrects a long
423 standing problem where the address of the string may be changed
424 in the subroutine but not in the calling program.
426 kes Re-enable code to remember last volume mounted on a non-tape
428 kes Add patch supplied in bug #1068 that fixes a SD crash when using
429 a Virtual autochanger.
430 kes Generate correct JobMedia records during spooling/despooling when
431 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
432 <tih@hamartun.priv.no> for excellent analysis and testing.
434 kes Tweak hash algorithm for htable using Martin Simmons idea
435 for doing a circular shift.
436 kes Remember what volume is in VTLs (previously turned off for
438 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
439 pointed out some problems in creating JobMedia records during
440 spooling with concurrent jobs. Fix the problem by updating the
441 start file position before despooling and generate a jobmedia
442 record at the end of despooling.
444 kes Fix handling of JobMedia records during spooling and when a
445 Volume is changed without actually writing data to the Volume.
447 kes Rework certain SD locking based on gdb tracebacks of deadlocks
448 sent by Eric. This code now uses only the volume_lock() rather
449 than the reservations lock when at EOM and acquiring a new
451 kes Ensure only one exit point in several subroutines.
453 kes Implement bsock code to permit locking. Use the new code in Verify
454 in the FD to prevent the heartbeat thread from disrupting the Verify
455 data sent to the Dir.
456 kes Modify SD locking to eliminate locking the reservations system from
457 outside the system. Use the volume lock when getting media data
458 and reserving a new volume at end of media.
459 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
460 when SD starts are not locked into place.
462 kes Fix error compiling runscript code on 64 bit machines.
463 kes Tweak Win32 mount point code.
464 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
465 cleared giving bad file estimate).
466 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
469 kes Keep Schedule run lists in order as suggested by
472 kes Implement autostart scripts for Debian.
473 ebl Implement upgrade catalog scripts.
475 ebl Apply jobstat patch for long term statistics. Have to implement
476 purge stats command and upgrade scripts.
477 kes Fix mtx-changer.in for broken Debian mt program.
479 kes Fix large number of JobMedia records reported by Eric Bollengier.
481 kes Apply doc fix from bug #1062.
482 kes Resolve crash and improper restore wx-console Win32 restore
483 GUI. Fixes bug #1065.
484 kes Update Win32 wxWidgets to latest version.
485 kes Attempt to do correct handling of Win32 mount points. Should
487 kes Fix Win32 FD backup/restore memory leak due to improper termination
488 of BackupRead/Write. This fixes bug# 1038.
490 ebl Reduce memory usage for accurate backup, working only with ctime
491 and mtime. (not all Lstat field)
492 About 40MB for my Linux system (400.000 files)
494 kes Add dcr->reserved_volume flag that allows us to release a volume
495 even if it is not vol->released. This allows maxvol2 to work when
496 Volumes expire and we are already writing to the device (i.e. a
497 volume is pulled out from under us by another job terminating after
498 we reserve the drive).
500 ebl Permit multiple command/console per runscript definition.
501 RunScript { command = /bin/true ; command = /bin/false ... }
502 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
503 (restart an application) just after the VSS snapshot on windows.
504 kes Don't zap dcr values during release_volume() as they might
505 have the next Volume to be mounted.
506 kes Fix AIX prototype.
508 kes Second cut of drive switching during backup.
511 kes Update Win32 version of wxWidgets to most recent version.
512 kes Tweak Copy job details.
513 kes Rework dir_find_next_appendable_volume to make a bit more effort
514 to find a suitable volume before giving up.
516 kes Make ask_sysop_to_create... to return if waken from wait.
517 This helps get out of blocked conditions.
518 kes Experimental implementation of switch_device in reservations.
519 kes Implement FD version to allow easier protocol changes.
520 kes Add Plugin Options string -- not yet passed to FD.
521 kes Implement PluginOptions ACL.
523 kes Attempt to correct problems with restores with autochangers and
524 use counts going negative
525 kes Rework SD status command and implement API for bat. Implements
526 header, runing waitreservation, devices, volumes, spooling,
527 and terminated status keywords.
528 .status storage=xxx <keyword>
529 kes Clarify TLS error message by adding double quotes around name.
530 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
531 kes Pass jcr to tls routines so debug messages can be handled better.
532 kes Rework jobq resource allocation code, and possibly fix a bug
533 that caused reference counts to get out of sync.
535 kes Rename fd/dir plugin to use Bacula standard underscore.
536 kes Plugin work -- bring dir up to fd level.
537 kes Start implementation of VTL code
538 kes Fix Win32 build after adding new cats subroutine.
540 kes First cut at Duplicate Job implementation.
542 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
543 kes Start PluginOptions string, and refactor a bit of ua_run.c
544 ebl Apply Allan patch that permit to reset recyclepool.
546 kes Test patch -- possible fix or improvement for bug #1053
547 kes Refactor FD and SD status commands to permit new API code in
548 SD, and to fix Win32 build.
549 kes Win32 build is now working.
551 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
552 some ideas in patch from Scott Bailey.
553 kes Begin implementation of duplicate Job control.
554 kes Fix some of Win32 build after recent additions.
555 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
556 which causes the FD to detect whether or not the OS has the
557 honor no dump bit (*BSD systems), and if so, to skip backing up
558 any file with this bit set. The feature is enabled by setting
559 'honor no dump flag = yes' in the Options section of a FileSet.
561 kes Correct po warning message with datarootdir
562 kes Implement more code in dird.c to put configuration parsing in
563 a class rather than use globals.
564 kes Restructure SD status command for implementation of bat API
567 kes Suppress incorrect 'Will not descend from x into y' messages.
568 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
569 daemon globals used by parser.
570 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
572 kes Fix free of plugin_list when none exists.
574 ebl Apply accurate project patch.
576 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
577 on non-mempool object)
578 kes First cut of converting FD .status to work with bat API.
580 .status client=XXX header
581 .status client=XXX running
582 .status client=XXX terminated
583 kes Implement first cut of Copy Job.
584 kes Implement Catalog in Pool resource. It overrides catalog specified
585 in the Client resource.
587 kes Apply patch (with some difficulties) from Joao Henrique Freitas
588 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
590 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
591 ftruncate() actually works. In the case of some (cheap) NAS devices,
592 it does not, and so recycling NAS Volumes does not work. The code
593 simply unlink()s the file, then recreates it. This fixes bug #1011.
595 kes First incomplete cut of big malloc blocks for htable.
596 kes Tweak plugin code.
598 kes Plugin debug code + tweak a couple bat dialog layouts
600 kes Fix creating first JobMedia record during Migration to include
601 proper index. This caused slow restores of migrated jobs.
602 kes Temp fix to plugin name file_index.
603 kes Bacula backed up and restored a MySQL database.
605 kes Implement plugin restore.
606 kes Implement parsing of db_driver to give db_type index.
608 kes First cut of plugin restore code.
609 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
610 and do not strip paths on symbolic links.
611 kes Set catalog backup database and user name from values specified on
612 the ./configure line.
613 ebl Fix #1031 about wrong pool source information in job report.
616 kes Remove a redundant jcr argument to find_files, match_files, and
618 kes Implement '.status dir header|scheduled|running|terminated' that
619 prints the requested status section. With the exception of the
620 header, the other reports have fields separated by tabs (\t).
622 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
623 a resource embedded run command to find a since time if no explicit
624 since time was supplied on the command line.
625 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
626 that updates the state file at job termination time in addition to
627 when the daemon terminates.
629 kes First version where a plugin did a backup.
630 bpipe-fd.so created a backup file, wrote a test
631 string to it, and Bacua could restore this fabricated file.
633 kes Implement DB Driver = string for the DBI driver.
634 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
635 kes First cut of code for loading Win32 plugin dlls. Implement
636 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
637 and implement a dlfcn.h file based on opengroup's definitions of
640 kes First cut plugin directives.
642 kes Apply patch from bug #1049 to prevent stripping the path on a
644 kes Attempt to fix bug #1047 where stripping a path corrupts the
645 heap. Waiting for feedback.
646 kes Correct the Mount message not to suggest labeling a new tape
647 when doing a restore. Submitted by email by John Stoffel.
648 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
649 FD by using casting. Reported in bug #1042.
651 kes A bit of crypto cleanup. More later.
653 Release Version 2.2.8
655 kes Apply patch from Martin to correct bug #1040, bscan sets existing
657 kes Fixed important spelling error in doc -- bug #1045.
659 ebl Fix bextract to be able to extract non-portable Win32 data to
661 kes Move initialization of read/write res lock earlier in the code.
662 This fixes the crash with a null conf file. This fixes bug
664 kes Redefine CURES in lib/parse_conf to be URES and move it all
665 into lib/parse_conf.c -- this responds to bug #1042, but does
666 not fix it. The fix is not to compile with FORTIFY_SOURCE.
667 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
668 the trunk SVN. I don't think this was reported as a bug.
670 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
672 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
674 kes Add DataDespooling and DataCommitting status (committing is
675 the last despooling).
676 kes Finish implementation of new reservations code noted below.
678 kes Fix bsnprintf for float point numbers. I broke recently when
679 parameterizing some variables. This fixes bug #1036.
680 kes Undo recent reservations changes ... will apply them later
681 when they work better.
683 ebl Fixes #1034 which cause mysql to hang the connection after 8h
684 ebl Change default statistics target of filename.name and path.path
685 fields for PostgreSQL. This speeds lookup by indexes. Thanks
687 kes A few more tweaks to new reservation code. Make sure to clear
688 vol released flag when retaking volume. When reading label and
689 label is bad mark volume unused. When recycling, mark volume
690 unused so it can be renamed.
692 kes Fix reserve_volume() so it doesn't release a volume in use
693 (i.e. a volume entry not marked released). This should be
694 the last part needed to fix bug #1018.
696 kes Move Heartbeat documentation from Job to Director resource.
697 This fixes bug #1033.
699 kes Fix existing switch drive SD code to call autochanger to release
700 any old volume. This must be done to keep the autochanger from
701 releasing subsequently newly reserved volumes in doing a close().
702 This should fix bug #1018.
703 kes Fail if attempting to get console input in batch mode. This
704 should help fail RunScript console commands that are incomplete.
705 kes First cut implementing switch_drive() in SD (not actually called).
707 kes Implement first cut running console commands in a RunScript.
709 ebl Fixes bug #1028 where 'Selection Type' option was not usable
711 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
714 Release Version 2.2.7
716 kes Add new free_tls() entry point so that Win32 builds.
717 kes Fix compile warning in src/lib/util.c
718 kes Fix entry point for edit_job_codes() so that Win32 builds.
719 kes Fix seg fault Frank Sweetser reports in regression testing
720 on his systems. The problem was that the original author of
721 bsnprintf.c did not take into account the side effects of
722 using ++x in the argument to a #define.
723 kes Make SD protocol backward compatible with version 2.2.x.
725 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
726 because Bacula no longer restores sockets.
727 ebl Always use ignorecase fileset option on win32 FD.
729 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
730 that implements double quoting include names in conf files,
731 and also allows piping input by having the first character
732 be a vertical bar (|).
733 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
734 that implement %f in RunScripts to pass the FileSet name.
735 kes Skip leading | when lex input comes from a pipe as suggested
736 by Michael Stapelberg <michael@stapelberg.de>.
738 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
739 Nerijus Baliunas <nerijus@users.sourceforge.net>
741 kes Implement Plugin Directory and plugin events.
743 kes Implement a security enhancement: TLS authentication but no
744 encryption. Enabled by setting 'TLS Authentication = yes'.
745 Note when this is on, TLS encryption is turned OFF!
747 kes This patch corrects a problem where the maximum concurrent storage
748 jobs counter gets out of sync during restore jobs causing jobs to
749 'wait on max Storage jobs'. This patch fixes bug #1009.
751 kes This patch fixes bcopy so that it produces correct Volumes.
753 kes This patch eliminates spurious output to the console during a VerifyVolume
754 job that contains encrypted data. It fixes bug #1024.
756 kes This patch prevents the 'status dir' command from trying to use a scratch
757 volume and possibly moving it from one pool to another. This patch fixes
760 kes Add new include to postgresql.c suggested by Marc Cousins so
761 that it compiles correctly with pgre version 8.3.
763 kes Fix --archivedir addition to configure. Replace it with
764 --with-archivedir in configure.in This fixes the regression
766 kes This patch fixes bug #1012 where the job is canceled because
767 of Max Run Time exceeded when the job has not yet started.
769 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
770 one 'part' to write. Instead of each part being stored on disk,
771 written to DVD, then deleted from disk, all parts are written to disk,
772 and only the last is written and deleted from disk.
773 kes This patch fixes the status command to include the formating string for
774 JS_AttrInsterting. It fixes bug #1021.
775 kes This patch should fix the Mac OS X build problem on the latest
776 Darwin, where sys/types.h was not included correctly (apparently
777 due to a change in the Mac headers). The solution was to explicitly
778 ensure that it is defined for the ./configure.
779 This patch also has a rebuild of configure that includes the Debian
780 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
781 kes This patch should ensure that queued messages to the console are
782 displayed as soon as possible. It should fix bug 1007, but has been
783 reported not to work.
785 kes This patch fixes the infinite loop when trying to increase the
786 maximum number of volumes in a Pool during the add command.
787 This patch fixes bug #1008.
789 Release Version 2.2.6
791 db Remove extra data on estimate command in joblist for bat.
793 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
794 really change anything, but is the beginning of doing it *right*.
795 To do it completely right the LastWritten date must be passed to
796 the SD, but it is not yet done.
797 kes Minor tweaks to some bat restore SQL.
798 kes This patch fixes bug #1003 where putting the message output from
799 a Verify job into the catalog results in a recursive loop. The problem
800 seems to show up only with postgresql (to be verified).
801 kes Correct %x to %p in postgresql debug statement.
803 kes Fix bug #942 where lots of emails where generated when the heartbeat
804 interval was low and Bacula wanted a different tape from the one in
807 ebl Add new SD despooling attributes and Dir inserting attributes
808 job status codes in the catalog (Status table).
810 ebl Use qmake-qt4 instead of qmake when available (debian system).
812 kes Add a security warning to src/cats/make_catalog_backup.in indicating
813 that passing the password via the command line (arg 3) is insecure.
814 This responds to bug #990 (it doesn't fix it).
816 kes Set default debug_level to zero. This corrects bugs #991 and #993.
817 kes Fix a crash in bat when it cannot connect to the Director for example
818 if the Director is not running.
819 kes Remove redundant INDEX (JobId) from File table in the trunk.
821 kes Make explicit exception to GPL in LICENSE to permit linking
822 the Win32 FD with Microsoft VSS code.
823 kes Apply the Solaris package patch from
824 Masopust, Christian <christian.masopust@siemens.com>
825 kes Apply the patch to optionally add a timestamp in the debug output
826 submitted by Mariusz Czulada <manieq@wp.eu>.
828 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
829 backend (sql_strerror). Fixes bug #989
831 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
832 It applied with no problems.
833 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
835 kes Redirect stderror to stdin on mt status command in mtx-changer.in
836 since the status is returned on stderr on Solaris.
837 kes Activate Close button on tray-monitor window. This fixes
839 kes Check for NULL item in parse_conf.c before calling it. In the
840 case of Device, there is no item and this caused a seg fault when
841 Device appears in the conf file.
842 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
843 avoids pulling in config.h multiple times in some new code.
845 kes Fix spurious warning message printed when creating a volume with
846 a LabelFormat. This fixes bug #976.
848 Release Version 2.2.5
850 kes Add JobId in place of Job name in all the Jmsg() output.
851 kes Correct the APP_DESC for the Win32 storage service (remove an e).
853 kes Make maxvol-test and new more strict maxvol2-test work.
854 kes Print JobId in all Jmsg() job output.
856 kes Add new SD despooling attributes and Dir inserting attributes
857 job status codes. This fixes bug 961.
858 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
860 kes Fix doc issue. This fixes bug #963.
861 kes Fix listing performance problems in bat. Pointed out by
863 kes Remove old debug code.
864 kes Fix bat code that tests for Win32. This should fix bug #968
865 kes Query 5 list wrong Vol after migration. This fixes bug #960
867 ebl Fix #969 where user can't change Replace option in restore menu.
869 kes Save jcr in thread specific data (tsd) for each thread.
870 kes Make Dmsg() print JobId as -%u.
871 kes Make Jmsg, Emsg, and others automatically pickup the jobid
872 for the thread if it exists.
873 kes Remove old reservation debug jid code.
874 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
875 ebl Add an option that permit to specify spool size in job
876 definition. (Applying patches/testing/spoolsize_per_job.patch).
877 You must upgrade SD and DIR at the same time.
878 dvl Add new configuration item --archivedir
879 dvl Adjust regression tests to use tmp not /tmp. This will allow
880 multiple concurrent runs of the regression tests.
882 kes Fix race condition that drops final block written to volume.
883 This happens in rare cases with multiple simultaneous jobs
884 when the Volume fills. This fixes bug #964. May be related
885 to bug #935 and possibly #903.
886 kes Eliminate more strerror() and replace with bstrerror().
887 kes Remove BSD getopt and replace with unrestricted IBM version.
888 kes Fix Win32 build for changed calling sequences.
889 kes More tweaks to the mount volume routines to get everything
890 right. Changed variable name from find to have_vol, which is
891 much easier to understand.
892 kes Enhance btimer debug code.
894 kes Fix FD->SD authorization failure, which was due to spurious
895 wakeups from a pthread_cond_timedwait(). Simply check the
896 predicate before continuing. This fixes bug #953.
897 kes Add const char where needed (more to do). Remove temp debug code.
899 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
900 kes Don't overwrite error message in check_tables_version.
902 kes Unlock batch insert tables with same calls used elsewhere.
903 kes Allow starting 59 jobs a second.
904 kes Make SD session key more random.
905 kes Add retry for SQLite opening db if it fails. Probably helps
907 kes Suppress extra error messages during batch insert failure.
909 kes Add jcr to timer packets so if killed message can be sent to job.
910 kes Add JobId to all Dmsg() output.
911 kes Put some FD auth code on dbglvl rather than fixed.
912 kes Return insert attributes error message in db msg buffer to avoid
913 false error messages. Helps fix bug #966.
914 kes Separate batch init error messages. Probably helps fix bug #966.
915 kes Make SD code that contructs attribute insert check string lengths
917 kes If Dir gets an error during inserting attributes, cancel SD.
918 This reduces unnecessary error messages.
920 kes Correct search boolean for getting Volume info
921 ebl Cleanup batch insert code. Probably fixes bug #965.
922 kes Back out one small change to the reservation system (reserving a volume).
923 kes Rework how a Volume is mounted. It is now much more intelligent and
924 will always attempt to use any mounted volume if possible and reduces
925 calls to the Director asking about volumes.
927 kes Turn off some code when batch insert not enabled.
928 kes Edit FD name in connect error messages.
929 kes Rework the reservation system to take into account that the Director
930 might give us a Volume that is different from the current one being
931 used, and to ensure that we don't exceed Maximum Volume Jobs.
932 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
933 fatal error with multiple jobs running'
934 kes Add more debug code in reservation system.
935 kes Implement maxvol-test to check bug #947.
937 kes Add code to handle tray monitor separated from Win32 FD.
938 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
940 kes Add missed return in fixing verify bug -- trunk only.
941 ebl Fix a command parser issue causing a director segfault.
942 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
944 kes Increase the max block size to 4MB fixes bug #957.
945 kes ERABT if user sets min block size > max block size. Fixes bug #956.
946 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
947 is not properly mounted (recognized) during a poll.
948 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
949 Job that has differences reports Verify OK.
950 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
952 ebl Add an option to operate on all pools with update vol parameters.
953 This complete the project 20. Patch from Nigel Stepp.
954 ebl Add history support to bconsole when using readline.
955 Using Ctrl-D to exit doesn't update .bconsole_history
956 kes Modify new volume algorithm to use max MediaId for generating next
957 volume number rather than the count of Volumes. This should essentially
958 eliminate the failure rate if some volumes were deleted. Bug #921.
959 kes Begin implemention of Optimize Job Scheduling.
960 kes Implement restore callback that Dirk and I agreed on for bat
961 restore. This fixes bug #928. Restore of backup of zero files fails.
962 kes Fix SQL Catalog logging which broke with new db_escape_string
965 Release Version 2.2.4
967 kes Fix bacula_cats.def for new db_escape_string().
968 kes Increase size of name string when FD making connection to SD.
969 May fix bug #953. FD->SD connection failure.
971 kes Add code to help Dan debug 2drive-incremental-2disk test.
972 kes Add code to try to fix bug #908.
973 kes Add waits to multiple exit detection code to try to force pid
974 file to always be deleted.
975 kes Restore good dev.tar.gz to rescue set appropriate binary property.
977 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
978 trying to switch drives by checking for blocking before unblocking.
980 kes Cancel storage daemon in all cases where FD reports error. This
981 should fix virtually all cases of bug #920.
982 kes Fix db_escape_string() for MySQL which did not compile.
984 kes Fix error message that was clobbered when Dir tells SD it does not
985 have write permission on Volume. This should fix a minor point
986 in bug #942, but not the main problem.
987 kes Add code to cancel job in SD if FD connection fails. This should
989 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
990 dvl Pass jcr and db into db_escape_string() to enable better escaping
992 kes Fix migration code to get correct Volume name with multiple volumes
993 by skipping |. Fixes bug #936.
994 kes Implement patch supplied by Landon to fix bug #944 where using
995 TLS with bconsole uses 99+% of the CPU.
996 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
998 kes Move patches into patches directory.
1000 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1003 ebl Using 'm' in bconsole will show messages like before,
1004 and not memory usage.
1005 kes Fix bug #935, and probably also bug #903 where files were not
1006 restored. MediaId was not properly set in JobMedia record after
1009 kes Suppress chown and chmod error messages if the FD is not running
1012 kes Apply Martin Simmons' patch that should turn off the new API usage
1013 when batch insert is turned off allowing building on older
1015 kes Add ./configure search in qwt-qt4 for qwt package
1017 kes Bacula is now free of 3rd party GPL copyrighted code!
1018 kes Remove idcache.c
1019 kes Add guid_to_name.c/h which replace idcache.
1020 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1022 ebl Detect if new PosgreSQL batch insert API is present.
1023 kes Correct incorrect mempool call causing Director crash. Occurs on
1024 systems without va_copy().
1025 sb Update spec files for 2.2.1 release
1027 kes Fix memory pool call in ua_output.c. bug #934.
1028 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1029 Add test program to fnmatch.c
1031 kes Integrate patch to README.vc8 from
1032 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1033 edit it to get it into Unix patch format.
1034 kes Implement mkpath.c to replace old FSF makepath.c
1036 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1038 Release Version 2.2.1
1040 kes Update POTFILES.in
1041 kes Cleanup a few underquoted AC_DEFUNs in configure
1042 kes Apply patch from Martin Simmons that adds a test for va_copy to
1045 kes Fix bug #921 by increasing the number of tries to create a new volume
1047 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1048 can be called multiple times. Implement a version for machines
1049 without va_copy() that gets a big buffer.
1051 kes Integrate more portable zone offset code into bsmtp.c
1052 Submitted by Attila Fülöp.
1054 kes Fix bad SD->FD return status reported by
1055 (James Harper) <james.harper@bendigoit.com.au>
1056 ebl Fix a bug in read_close_session which return random status
1057 thanks to James Harper
1059 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1060 and directory names during restore of single file/directories.
1061 kes Add sanity checks to .sql command when string is empty. Hopefully
1062 that will resolve Dirks Director crash.
1064 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1065 in the bsmtp chat subroutine when debug is >= 10.
1067 kes Fix Director crash when running bat SQL queries.
1068 kes Add David's notes on Item 8: Copy pools.
1070 kes Rework projects file to be current and ready for a vote.
1071 kes Enhance lex scanner error message.
1073 kes Tweak LICENSE file to mention BSD code.
1074 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1075 if specified on the ./configure.
1076 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1077 This class is intended to allow us to open a second bsock to the
1078 Director while in the restore subdialog.
1080 kes Fix configure to create bat Makefile before creating dependencies.
1081 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1082 kes Add a tooltip to the tray monitor.
1083 dvl Set the Director's PID file before dropping privs. This fixes
1086 kes Update AUTHORs file
1087 kes Increase the default max concurrent jobs to 20 in FD and SD to
1088 correspond with the default .conf files.
1089 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1090 some different, of the same file created by RN when porting the
1092 kes Rearrange some of the Win32 directories and the placement of the files
1094 kes Set DEVELOPER flag in version.h
1096 ========================================================================
1097 Release Version 2.2.0
1099 kes Apply a second doc patch from Marc.
1100 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1101 improves the tips section that discusses how to setup multiple
1104 kes Update bat README file.
1105 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1106 corrects a typo in the Recycle status check in db_find_next_volume().
1107 This will probably fix a number of annoying problems with multiple
1109 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1110 bnet calls -- no functionality change.
1112 kes Modify the Verify output to specify if files are missing on
1113 the Volume(s) or disk. Fixes confusion in bug #916.
1114 kes When more than one Volume is read in a migration job, the last
1115 Volume bytes reported are from the last read volume rather than
1116 the last written volume. Fixed. This fixes bug #910.
1117 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1118 It previously printed New Recyle flag is: no. This fixes bug
1121 kes Correct seg fault when switching tape drives during restore.
1122 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1123 be used until after 2.2.0 release.
1125 kes Remove fnmatch() in SD that permitted wild card specifications.
1126 This fixes bug #914.
1128 kes Fix %g in filename returned by SQL for browse tree reported by
1130 kes Fix configure so that it puts config.out in the cwd rather than
1132 kes Attempt to fix the locking problem reported by Eric in bug #906.
1133 kes Make berrno class to leave errno unchanged after constructor call.
1134 kes Make bnet_server use the heap rather than the stack to allocate
1135 its socket fd pointers to avoid a crash at termination. Problem
1136 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1138 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1139 and putting it in depkgs-qt along with Qt4.3.
1141 kes Rework code in acquire.c that switches drives for reading when
1142 the Media Type does not match. This should fix bug #906
1144 ebl Fix a director segfault during job setup #907
1145 kes Correct seg fault in postgresql when first operation returns no
1146 rows. Fixes Dirks File browser problem seg fault with bat.
1148 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1149 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1152 kes Implement PopUp YES/NO dialog for bat.
1154 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1156 kes Correct RunScript to terminate job in FD on failure.
1157 kes Change abort_on_error and AbortJobOnError to fail_on_error
1158 and FailJobOnError in RunScripts.
1159 kes Minor tweaks of code formating in RunScripts, principally to
1160 avoid depassing 80 columns.
1162 kes Eliminate one #ifdef Win32 in bsmtp
1163 kes Implement grow tool to grow a file for testing very large databases.
1164 kes Add big-vol-test to test Bacula seeking with > 5GB.
1167 kes Modify find_next_volume() to return all values in Media record.
1168 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1172 kes Update Release notes
1174 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1175 Warning, in previous beta version, all media get from scratch keep their
1178 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1179 This should fix bug #842. Made a note to look at removing the temp
1180 files at the end of the install.
1181 kes Add ability to mount and unmount a file device providing it is
1182 marked as being removable and has the appropriate mount and unmount
1183 commands defined in the Device resource. This fixes bug #830.
1184 kes When applying a storage override, release all previous storage
1185 definitions rather than just prepending the new storage.
1186 This should prevent a good deal of confusion.
1188 kes Implement ./configure search for qwt libraries.
1190 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1191 Win32 FD. This should fix bug #893.
1192 kes Remove an unnecessary beep in Win32 init code.
1193 kes Update copyright dates in Win32 executable about boxes.
1194 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1195 code with a BSD getopt.c and getopt.h.
1196 kes Remove sched.h from the Win32 compat directory -- not used.
1197 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1198 need to shut it down, do it through the services panel or the command
1200 kes Remove some inappropriate Bacula FSFE copyrights.
1201 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1202 kes Fix regress config non-portable test as pointed out by
1203 Florian Heigl <florian.heigl@gmail.com>
1204 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1205 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1207 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1208 Reported by Frank Sweetser.
1212 kes Fix client-only build.
1213 kes Integrate client-only fixes for bsys (initgroups) and conio from
1214 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1215 kes Make arguments to get_scratch_volume() in same order as other
1217 kes Rework the prune_volumes() subroutine so that after purging and
1218 no volume found in desired pool, it will check for a scratch
1219 volume. This prevents recycling the whole scratch pool.
1220 kes Add code to status storage to print boffset_t (largefile support).
1222 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1223 kes You now need a --with-qwt=<dir> to be able to build bat.
1224 kes Update src/win32/cats/bacula_cats.def to include the new
1225 db_get_query_dbids() call on Win32.
1227 kes Correct a problem when selecting a scratch volume and moving
1228 it to another pool that lost some columns.
1229 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1230 kes Enhance Autochanger error messages to include Volume and device name.
1231 kes Rework prune_volumes() code to take account of InChanger flag,
1232 and to handle recycling volumes going to the Scratch pool and
1233 current pool because the RecyclePool directive.
1234 kes Implement a better and more efficient db_get_query_dbids() to
1235 handle creating and passing back a list of DBIds.
1239 kes Start work on new more efficient DBId subroutine. First use
1240 will be for recycling volume to Scratch inchanger.
1241 kes Increase number of JobIds in pruning from 1000 to 10000.
1242 This to be replaced by above routine.
1243 kes Begin implementation of building Qt4 on Win32.
1244 kes Correct typo in fix I added for bad TLS shutdown.
1245 kes Pull 2.0.3 patches into patches directory.
1246 kes Update Release notes. Include qt-console in line count.
1247 kes Update Projects file.
1249 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1250 bug in migration code where a job that spanned two volumes
1253 kes Implement new BST_DESPOOLING blocked state. Change from locking
1254 during despooling in SD to blocking. This means that other threads
1255 can work with the device structure, in particular the reservations
1256 system while despooling.
1258 kes Fix return in reservation message queue that missed clearing
1259 the jcr lock (implemented 26Jun07 below).
1260 kes Rename a number of dev methods to make locking function names
1262 kes Document locking in lock.c. Move lock structures to new file
1265 kes Move reservations message lock to lock jcr only this
1267 kes Move main SD locking code into lock.c (new file).
1268 kes Update Win32 build to include lock.c
1272 kes Dirk committed the qwt library code for drawing graphs in bat.
1273 kes Tweak install of qwt so that it is integrated with ./configure.
1275 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1276 out by Eric (my typo).
1277 ebl Fix configure.in to get batch mode enable
1278 kes Return correct string from authenticate.cpp in bat when connecting
1280 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1281 spurious line drops when using TLS.
1282 kes Do not file reparse points when restoring a file that already
1285 kes Implement Windows reparse points -- similar to directories, but
1286 we do not descend into it. This is a first cut. They seem to
1287 be backed up, but restore is not yet tested.
1288 kes Remove restore_blocking in tls code when shutting a socket to leave
1289 it in blocking mode. Hopefully this will fix the encryption bug
1290 reported by Frank Sweetser.
1291 kes When opening a file for backup, tell the OS that we are going to
1292 read it sequentially -- optimization.
1293 kes Change variable names in authenticate_director() to not conflict
1294 with member names in bat. Caused great confusion with compiler,
1297 kes Queue openssl error messages in case of comm problem.
1298 kes Do shutdown() call if socket terminated.
1299 kes Remove some duplicated code in tls.c
1300 kes Move more of the bsock member variables into private and access
1302 kes Add Frank Sweetser's tls-test to the regression suite.
1304 kes Add Swedish sv.po file
1306 kes Don't print clock skew message in FD if less than 3 seconds diff.
1307 kes Add a bit of VSS info to status client.
1308 kes Implement a first cut of Vista VSS, using Win2003 code.
1310 Release: 2.1.20 beta
1312 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1313 loaded tape but uses first drive).
1314 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1315 This was indeed a Win32 issue.
1317 kes Simplify search of autochanger for in-use Volume.
1318 kes Fix exit condition of check for in-use volume. kes Remove
1319 inappropriate my_postgresql_free_result() in db_close()
1321 kes Fix bad return in FD when encryption signature not found.
1322 Probably caused a crash.
1323 kes Inhibit missing encryption signature error messages for
1324 file types where no signature computed.
1325 kes Correct inverted check on autochanger in reservation system.
1326 kes Tweak debug code in autochanger reservation.
1328 kes Add some additional locking in the cats directory in subroutines
1329 that modify packet variables called from batch insert.
1330 kes Rework how dcrs are allocated. new_dcr() can now be called
1331 with an existing pointer, and it will simply clean it up.
1332 This allows the reservation system to test various different
1333 devices, and will permit easy device changes.
1334 kes A bunch of changes all over to handle new new_dcr() calling
1336 kes Work more on the Volume management in the SD. Remember Volumes
1337 for tape drives and for autochangers (even virtual disk changers).
1338 kes When looking at the Volume list to reserve a drive, handle
1339 autochanger names correctly by interating through the changer
1340 devices. Also call the Director to see if a Volume is suitable
1341 for the current job.
1342 kes Fix some bugs in bscan. Make sure all media records are written.
1343 Make sure that valid JobMedia records are written for disk files.
1344 Previously they were completely wrong.
1345 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1346 that the URLs don't change and so that the developers will all
1347 work off the same copy. Rebuild from scrach.
1348 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1350 Release: 2.1.18 beta
1352 kes Fix seg fault in FD from incorrect digest size.
1353 kes Fix argument to non-OpenSSL crypto.c subroutine.
1355 Release: 2.1.16 beta
1357 kes Remove a few malloc()s from the encryption code.
1358 kes Use the class calls to bsock in filed/backup.c and restore.c in
1359 place of the old bnet_xxx code.
1360 kes Implement code that does an on the fly calculation of the
1361 signing digest during restore of encrypted files. It makes
1362 a best guess at the algorithm, and if it is not correct, will
1363 then revert to the old code which reads the file after it is
1365 kes Implement at least one missing crypto stream in stream_to_ascii()
1366 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1367 #877 where a reload with bad syntax causes Dir to exit.
1369 Cut: 2.1.14 beta (not released)
1371 kes Do not free a volume on a tape drive until another volume is
1372 mounted and read, or the autochanger unloads the volume.
1373 This should help the SD re-use volumes that are already mounted,
1374 and should fix bug #886.
1375 kes Apply patch from user brettedgar that allows gnome2-console include
1376 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1377 kes Apply patch from Lucien Weller that fixes day of week calculation
1378 because of DST flag problem. Fixes bug #887.
1380 kes Move find_next_appendable_volume() to after acquiring a valid device
1381 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1383 kes Unable to reproduce bug 872. However added additional testing for
1385 kes Bug #874 resolved by documenting SQLite limitations.
1386 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1387 kes Bug #881 resolved by removing typo in mtx-changer script.
1388 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1389 approval. Added a link to the wiki on the web page, and implemented
1390 a backup from http://paramount.ind.wpi.edu
1392 kes Fix update allfrompool to pass pool name.
1394 kes Convert to pure GPL v2 license.
1395 kes Fix sscanf problems reported by Peter Buschman that caused
1396 a bus error on Solaris.
1397 kes Rework (simplify) the select prompt in bat.
1398 kes Move get_jobid_from_tid() into lib and create a
1400 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1401 should definitely fix the problem of lost error messages in the
1403 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1404 kes Eliminate tcpd.h from the project. Enclose the #include from the
1405 library with extern C ...
1406 kes Add print of signal name when a signal is trapped.
1408 Release: 2.1.12 beta
1410 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1412 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1413 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1414 makes SQLit3 run 30 times faster, though a bit less safe.
1415 kes Implement --with-batch-insert in configure and detection of thread
1416 safe libraries. It is on by default, but turned off if no thread
1417 safe library (e.g. SQLite 2) is available.
1419 kes Fix Bacula PostgreSQL buffer overruns.
1420 kes Do better checking for NULL results returned from PostgreSQL;
1421 implement retry for failed queries; clear results buffer after
1422 failed query. Hopefully this will correct the PostgreSQL failures.
1424 kes Implement algorithm to handle only one appendable volume with
1425 Prefer Mounted Volumes = no.
1426 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1427 returned from a query.
1428 kes Make volume lock recursive.
1429 kes Implement an additional volume reservation algorithm that
1430 starts by considering all reserved volumes then uses the
1431 old brute force algorithm of searching the resources to
1432 find a suitable device.
1433 kes Add new reservations debug code and refine the old code.
1434 kes Update the win32/dll/bacula.defs file.
1436 kes Tweak reservations algorithm to permit a few more cases, i.e.
1437 volume reserved, but on different drive, ...
1438 kes Enhance SD status to include Pool and Media Type for drive in a
1439 more readable format (a bit longer).
1440 kes Fix PostgreSQL double free.
1442 kes Minor refactoring of restore decryption code.
1443 kes Add code to smartall.c to detect double free of a buffer.
1445 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1446 so that bsmtp will create a correct email address (mailbox only).
1447 kes Modify 'memory' command so that the buffers are listed as 'In use'
1448 to avoid confusion with Orphaned buffers.
1449 kes I reworked the OpenSSL include/lib flags to be handled in
1450 the standard Bacula way, which should fix bug #863 concerning
1451 non-standard OpenSSL libraries.
1453 kes Implement Help Browser window for bat.
1454 kes Fix reload bug that reset StorageId to zero.
1456 kes Fix TLS #ifdefing when TLS turned off.
1457 kes Ensure that when labelling a tape with Slot=0 that InChanger
1459 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1461 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1462 add DISTINCT (required by PostgreSQL).
1463 kes Implement BSOCK authenticate_director() method. Eventually will
1464 authenicate all daemons.
1465 kes Move several more functions into the BSOCK class.
1467 kes Add code to tell the OS that we no longer need a cached
1468 file that we were reading. In findlib/bfile.c. Also,
1469 only cache files that we are reading. Thanks to
1470 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1471 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1472 kes Implement script to automatically generate cats and dll .def
1473 files for Win32 dll.
1474 kes Update README.mingw32 to include new .def file generation.
1475 kes Correct typo in UTF-8 error message as reported by:
1476 jhernandez <julianhernandez@gmail.com>
1477 kes Add additional sm_check() code on debug level 1.
1478 kes Set default debug level to 1.
1479 kes Trap SIGABRT in attempt to get traceback.
1481 kes Reduce bat connect timeout from 30 to 15 seconds.
1482 kes More restructuring and implementing BSOCK class in place of
1484 kes Remove a few unnecessary malloc() tests in crypto code.
1485 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1486 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1487 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1489 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1491 kes Fix Verify InitCatalog. The attributes were not pointing to the
1492 correct saved location.
1493 kes Implement message callback so that GUI is sure to get all
1494 daemon messages. Currently displayed in a dialog in bat.
1495 kes Ignore SIGUSR2 (Bacula timer) in bat.
1496 kes Apply regress patch from bug #859 to allow regress to work
1497 with Solaris compiler.
1499 kes Begin adding TLS support to bat.
1500 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1501 clean up lex.c and make it more readable.
1503 kes Move more bnet functions into the BSOCK class.
1504 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1505 kes Complete change of berrno strerror() method to bstrerror()
1507 Release: 2.1.10 beta
1509 kes Cleanup incorrect email addresses in bsmtp.
1510 kes Make bat display initial messages rather than discard them.
1512 kes First cut of adding .mod to the run command.
1513 kes Implement auto display of messages in bat.
1514 kes Enhanced preferences to allow all Bacula output to be
1517 kes Try to make bsmtp date routines more generic.
1518 kes Fixed bug #856 autochanger documentation.
1519 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1520 kes Add new cats entry point so Win32 builds.
1522 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1524 kes Do better checking for the MySQL 64 bit libraries looking for both
1525 .a and .so libraries.
1526 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1527 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1528 kes Require the thread safe version of MySQL during configure. Thanks
1529 to Andre Noll for pointing this out.
1530 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1531 continuing in migration code.
1532 kes Apply implementation of tray-monitor font derived from gnome-console
1533 submitted by Andreas Piesk <a.piesk@gmx.net>
1535 kes Eliminate important memory loss in SQLite
1536 kes Fixed the batch insert MySQL thread specific data that was not
1537 being freed. See cats/mysql.c:db_thread_cleanup().
1538 kes Fix restore before command.
1539 kes Convert old hdr.name to name() in a few places.
1540 kes Implement update jobid command.
1541 kes Return all time_t dates in db_get_job_record()
1542 kes Stop watchdog in SD earlier.
1543 kes Put Pool just after Storage in please mount message.
1544 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1547 kes Update the po files.
1548 kes Fix Verify InitCatalog by making it cache attributes.
1550 kes Change name bacula-bat to bat for man 1 page to correspond to
1552 kes Check for client and store NULL pointers in status command. This
1554 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1555 kes Fix sign extended editing of %p.
1556 kes Clean out a little old #ifdefing in cats/mysql.c
1558 kes If time diff between DIR and FD is more than 600 seconds convert
1559 INFO message to WARNING.
1560 kes Implement heap size display in status for all daemons.
1561 kes Attempt to fix MySQL db open memory loss (not successfull).
1562 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1563 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1564 Query. This looks like a MySQL but but by doing extra releases,
1565 the memory goes away. This should fix bug #847.
1567 kes When backup fails, cancel SD before waiting for sd termination.
1568 kes If SD is waiting for FD to connect during cancel, wake up the
1570 kes Fix fsf code so that errno is correctly reported.
1571 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1573 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1574 so that Bacula doesn't later stumble into a seg fault.
1575 kes Use the term Restore Client in the restore Job report.
1576 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1577 the original job's FileSetId.
1578 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1579 spooling in migration jobs. Not yet tested.
1580 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1581 reading conf file from a pipe. However, do it with open_bpipe()
1582 rather than popen. Not yet tested.
1584 kes Fix an ugly bug where the VolCatBytes were getting updated
1586 kes Implement bconsole memory command that prints current memory
1587 usage, plus smartalloc dump.
1588 kes Clarify some error messages in backup, admin, and migrate.
1589 kes Shrink label dialog to smaller size.
1590 kes Invert Cancel OK buttons on restore to be OK Cancel.
1591 kes More strerror() to bstrerror() conversions.
1593 kes Start implementing bstrerror() in place of strerror().
1594 kes Stripping path -- seems to work.
1596 kes Prevent door and port files from being restored (mostly
1598 kes Free an unreleased buffer in compat code.
1599 kes Change console Job name from *Console* to -Console- to eliminate
1600 Win32 filename problems. Put Win32 path separator when creating
1601 Console file. This fixes bug #846.
1602 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1604 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1606 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1607 to force Win32 error message.
1609 kes First cut strip path. The data should be passed to the FD,
1610 but nothing is done with it yet.
1611 kes Enhance the digest and signature routines in the crypto
1612 library to accept a JCR and to use it to print error messages
1613 so that they will go in the Job report rather than the daemon's
1615 kes Simplify some of the verify signature code.
1616 kes Simplify a few of the alternative returns in the signature
1619 ebl Use only POSIX regex instead of GNU regex in breg.c for
1620 File relocation. It fix broken freebsd compilation.
1621 kes Convert all other Dir files to use new ua class message
1623 kes Tentative fix for missing digest signature in bug 807.
1624 kes Correct handle problem in new win32_ftruncate routine.
1625 kes Convert ua_purge.c and ua_update.c to use new ua class
1626 message routines for bat.
1628 kes Correct incorrect installation of LICENSE in Win32 installer.
1629 kes Display LICENSE at the beginning of the Win32 install.
1630 kes Attempt to correct the need for the png files to be installed
1632 kes Reapply my bat.conf install script in qt-console. I think I
1633 editted bat.pro instead of bat.pro.in and it was lost.
1634 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1635 the /var/lock/subsys for subsysdir. Also corrects typos in the
1638 kes First cut update job.
1639 kes Correct configure to include qmake of src/qt-console directory.
1641 kes Make restore job yes/mod/no print in one command so GUI works.
1642 kes First cut implementing backup and restore client.
1643 kes Correct editing in Verify output that caused a seg fault.
1645 kes Insure that bat.conf is not overwritten during installation.
1646 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1647 while I was implementing migration in March 2006 !
1649 ebl Cleanup file relocation, using char *RegexWhere instead of
1650 char *where + bool where_use_regexp
1651 kes Update some manpages and add bat manpage.
1652 kes Make a first cut at converting bacula.spec.in for bwx-console
1654 kes Apply patch from John Goerzen to add hostname as fourth argument
1655 to make_catalog_backup script.
1656 kes Fix typos I introduced into bsmtp.c
1657 kes Make pm_strxxx() routines handle input of NULL pointer. This
1658 is to protect from NULL pointers returned from SQL databases.
1659 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1660 kes Add more debug to FIFO code -- fix fifo regression test.
1662 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1663 kes Add thread timer to bnet_connect() to break from OS if wait time
1666 kes Update Win32 build to include new files, new symbols, and
1668 kes Implement socket level heartbeat (tcp_keepidle)
1669 ebl Commit File relocation patch
1670 kes Make bat have 'make install' target.
1671 kes Warn during install if old gnome-console binary found.
1672 kes Warn during install if old wx-console binary found.
1673 kes Add -8 option to bsmtp command line to add content type utf-8.
1674 Fixes bug #809. (Character coding problem in bsmtp).
1675 kes If < is found in target (from, to, cc) then do not enclose the
1676 target in < > in bsmtp. Fixes bug #772 (malformed address).
1677 kes When printing certain items in dbcheck, stop after 300000.
1678 Fixes bug #822. (dbcheck loops).
1679 kes Incorrect status in Dir after waiting for mount with poll set.
1682 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1684 kes Print waiting to reserve a device every 5 mins.
1686 kes Don't call close_part in label.c if tape and relabel.
1687 kes Don't free volume if busy in close() -- should help with
1689 ebl Fix #824 RunScript bug (After script could be execute twice)
1690 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1691 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1692 Add a regression script to test RunScript
1694 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1697 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1698 deprecated. No additional bugs will be fixed, and they will be dropped
1699 in a future release (probably 2.4.0).
1700 kes Change name of wx-console to bwx-console to make it more Bacula
1702 kes Change the name of gnome-console to bgnome-console to make it
1705 kes Some time in March, a Feature Request with patch from Jorj Bauer
1706 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1708 The ability for the director to validate a Client (FD) CN against
1709 an arbitrary set of patterns rather than the hostname, with
1710 A new 'TLS Allowed CN' set of directives which are implemented
1711 in the Client resource. Then pattern matching is used in place
1712 of hostname matching against the Certificate's CN. As an example, we
1713 have certificates which (a) use a local CA, and (b) have a CN of the
1715 kes Add new/changed entry points to Win32 build
1716 kes Create unaccepted-projects for projects that are not accepted.
1717 kes Simplify locking in the reservations system.
1718 kes Add more debug code in reservations.
1719 kes Make sure error condition on reserving a volume is handled correctly.
1720 kes Correct handling of volume_in_use.
1721 kes Correct handling of initializing a device.
1722 kes Move handling of broadcasting releasing a device into release_device().
1723 kes Correct attaching dcr to dev so that it is only done if device
1724 is properly initiated.
1726 kes Locking debug level tweaks in SD.
1727 kes Tweak new Volume code.
1729 kes Add exec external-command [wait-seconds] to bconsole. This
1730 executes the external-command. Note! normally external-command
1731 should be enclosed in double quotes.
1732 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1733 it should normally be off in a production system.
1735 kes Implement die command for SD so that we can force it to dump.
1736 kes Implement SD lock debug code.
1737 kes Implement new algorithm for keeping Volume list in SD. It
1738 is now owned by the device.
1740 kes Implement new code for freeing in use volumes that should
1741 resolve if not all, some of the problems of multiple drive
1742 tape conflicts described in bug 801.
1744 kes Fix gui/bacula-web/images files in svn.
1745 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1747 ebl Fix a bug in batch mode (in string escape)
1748 kes Correct migration prune SQL typo that crept in in a
1749 recent 2.1.x change.
1751 kes Move bnet_despool() into class in bsock.c
1752 kes Modify job report to include director name and Build OS.
1753 kes Move drop root privilege and check_catalog() before fork.
1754 kes Add update database scripts (version 9 to 10) to updatedb directory.
1756 ebl Check size and age of each file after its backup to see if
1757 it has changed during backup, if 'checkfilechanges' is set.
1758 The FD will do an extra check (stat(2)) after
1759 each file backup. mtime, ctime and size are compared with
1760 'before backup' information. If time or size mismatch, an
1761 error message will be generated. You must upgrade FD to use it.
1763 kes Make database name and user configurable
1764 --with-db-name=xxx --with-db-user=xxx
1765 kes Add back database type to message.c for debugging.
1767 kes Implement dir_sql() which issues an SQL query.
1768 kes Modify bat medialist to use dir_sql() and do some minor C++
1769 formatting as well as eliminating a number of pointers, simplifing
1772 kes Fix some of the mtx-changer grep commands for tape label readers.
1773 kes Convert a number of bsendmsg into the appropriate send/warning/error
1774 message class calls.
1775 kes Suppress the using database message in the .sql command.
1776 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1778 kes Add context menu for floating a window.
1779 kes Some minor cleanup and name changes in qt-console
1780 kes Add doing mt setblk 0 in Win32 mtx-changer.
1781 kes Apply Martin's bug fix to move definition of ENODATA for
1783 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1784 sqlite2 and sqlite3.
1786 kes More pruning cleanup.
1787 kes Turn on wait_for_drive by default in mtx-changer.
1788 kes Turn on Batch insert code by default as it now passes regression.
1789 kes Add ./configure --enable-bat to enable building of Bat.
1790 No install yet though.
1792 kes Implement a new .sql command for bat.
1793 kes Implement code to turn off pruning in obtaining the next volume.
1794 Pruning is turned off for the status dir command, but turned on
1795 for SD requests and for the list nextvolume command.
1797 kes Correct Qmsg() that was not updated correctly when committing a
1798 previous change (probably the recent TLS patch).
1800 kes Write new subroutine is_volume_purged() that explicitly checks
1801 if the Volume is purged, and if so marks it as such. This should
1802 resolve problems reported about needing to mount twice to recycle
1804 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1805 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1806 amount of duplicated code.
1807 kes Do volume pruning only for the Media Type desired (reduces pruning time
1808 if multiple Media Types are in the same pool).
1809 kes Implement more detailed info in the Job report for the Bacula version
1811 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1813 ebl Add bbatch tool to bench database and insert mode.
1814 Fix sql quote stuff in batch mode
1815 Fix sql stuff for mysql
1817 kes Correct problems with am/pm scheduling. Fixes bug #808.
1818 kes Implement new prunning code that prunes up to 1000 jobs at
1819 the same time. The same technique can be applied to a number
1820 of other prune/purge subroutines.
1821 kes Add an insanity check when starting a new tape job to ensure
1822 that the tape position has not been changed. If so fail the
1824 kes Fix Win32 build for dlls to add the folllowing:
1825 src/lib/bsock.c -- new file with new entry points
1826 src/lib/dlist.c -- new entry points
1827 src/cats/sql_create.c -- new entry point
1828 src/cats/sql_cmds.c -- new DATA item exported
1830 ebl batch mode cleanup bscan-test is ok now.
1831 kes Implement SD code to check length of disk volume before appending.
1833 kes Correct return status on db_batch... routines.
1834 kes Add call to db_write_batch_file_records() to migration code.
1835 ebl Fix AfterJob timing
1836 kes Move the checking of the database in initializion of the Director
1837 to after we drop privileges. This avoids the need for both root
1838 and bacula access to the DB.
1839 kes Correct a misplaced variable definition in src/filed/backup.c
1840 kes Correct how the new batch insert db_create_attributes_record()
1841 uses the arguments. Caused a seg fault in bscan.
1842 kes Implement lock() and unlock() methods in DEVICE class.
1843 Implement block() and set_block(xx) methods in DEVICE class.
1844 kes Modify bnet_connect() so that it uses time() to check for the
1845 wait time expiring (on some OSes, some system calls may not
1846 return immediately).
1847 kes Modify Verify to obtain the previous JobId when it is actually
1848 running rather than at schedule time (as it was in 1.38.x).
1849 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1851 kes When checking pid in pid file, continue running if the pid is
1852 the same as ours. This occurs on IRIX after a system crash.
1855 kes Extend new GUI API.
1856 kes Make the ua structure a class, and implement send_msg(),
1857 error_msg(), warning_msg(), and info_msg().
1859 kes Apply fix from for building wx-console on the Mac from
1861 kes Implement new select mechanism for GUI programs.
1862 kes Reorganize initialization of stackedWidgets in bat.
1864 kes Add updated nagios plugin supplied by Christian Masopust.
1866 kes More bat implementation.
1867 kes File migrate bug with Pool Occupancy using mediaid instead
1868 of jobids. Fixes bug #795.
1869 kes Fix orphaned buffers in filed backup and verify due to
1870 crypto buffers not freed during errors. Fixes bug #789.
1871 kes Extend new GUI api code to tree commands.
1872 kes Ensure that tree and dot commands check console ACLs.
1873 kes Permit marking directory with trailing slash.
1874 kes Allow 20 console connections (instead of only 10).
1876 kes Add smartctl call to bacula-sd.conf as an example of getting
1879 kes Modify jobq.c to let simultaneous restore jobs run. This may
1880 cause them to fail if they cannot get a drive.
1881 kes Add Client Connect Wait to Storage daemon to permit users to
1882 modify the time the SD waits for a FD connection.
1884 kes Correct virtual changer check which was backwards. This caused
1885 volumes to be unloaded into slots already occupied.
1887 kes Apply Command ACL filter to JobId list in restore command.
1888 kes Correct typeo in var.c patch.
1890 kes Don't let Bacula prune File or Job records for the current Job.
1891 kes Fix variable substitution pad + inc bug reported (with patch)
1894 kes Correct SQLite log table index as reported by Luca Berra.
1896 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1898 kes Begin implementing new comm signals for API.
1899 kes Fix a few places in lib/message.c where the open fd may
1901 kes Continue implementing lib/bsock.c (real class). Make jcr,
1902 who, host, and port private. There are new methods to access
1903 them for non-class use. This required touching a number of files.
1905 kes Add LANG=C to autoconf/randpass so it works with languages other
1906 than English. Fixes bug #788.
1908 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1910 You will not be able to generate Include/Exclude list any more.
1911 It will be fixed soon.
1912 If you want to use this, you can apply
1913 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1915 kes Restore of sockets created false error messages because Bacula
1916 no longer restores sockets, but the code was still trying to
1917 set the attributes on a non-existent file. Reported by a user.
1918 ebl finish RecyclePool feature
1919 Media will takes Pool.RecyclePool
1920 when moving from Scratch to a Pool or when user will do
1921 update volume=xxx frompool
1922 To use it, add RecyclePool = aPool to your Pool resource
1925 RecyclePool = Scratch
1929 kes Expand new BSOCK class adding signal() and new BNET signals.
1930 kes Begin enhancing the dot commands adding a new API function
1931 that returns more information and will make it easier
1932 to interface to the Director from a program.
1934 kes Make DEVICE fd private. Its new name is m_fd, and can be
1935 obtained with dev->fd() outside the class. This is the
1936 first of many DEVICE members to be made private.
1937 kes Implement Michael Renner's idea on having a virtual disk
1938 changer. I made some minor modifications (e.g. I did not
1939 implement the Virtual Changer directive, but simply set
1940 the Changer Command to an empty string.
1942 kes Implement a BSOCK send() method that writes the whole record
1943 in a single write() request rather than in two.
1944 ebl add update volume=xxx recyclepool=yyyy
1945 volume takes recyclepool from pool when using update volume=xxx from pool
1947 kes Fix encryption deblocking bug, which caused some restored files
1948 to be truncated. This fixes bug #763.
1949 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1950 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1952 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1953 ebl Use btime_t instead of uint64_t in media patch.
1955 kes Optimize the use of the database a bit in the Status dir command.
1956 Only open it when needed, ensure that if any previous database
1957 was opened, it is closed.
1959 kes Correct VolCatBytes bug from media patch.
1960 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1961 in the case of orphaned records.
1962 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1963 and File records in 300K chunks to be more efficient. This
1964 idea came from Juan Luis Frances (if I remember right).
1965 kes Apply Eric's scratch patch that moves a purged Volume to
1966 the RecyclePool. Question: how is RecyclePool set? what
1967 happens to the ScratchPool?
1968 kes Apply Eric's media patch that collects read/write media
1969 times as well as byte counts. This patch requires a
1970 simultaneous upgrade of the DIR and SD. Note, there
1971 should be some way to turn off timing. I'm not sure
1972 times are in Bacula units.
1973 kes Apply Eric's batch-insert patch.
1975 kes Update projects list.
1977 kes Implement Include/Exclude file lists in FD as dlists using
1978 the new dlistString class. This permits efficiently having
1979 large include/exclude lists and completes project Item 25.
1980 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1981 console is authorized to cancel the job. This fixes bug
1983 kes Modify SD so that the VolCatJobs medium record is updated
1984 at the beginning of a Job rather than the end. This
1985 fixes bug #775 where exceeding MaxVolJobs caused jobs
1987 kes Added a mutex around getting and setting Volume information
1988 so that multiple simultaneous jobs will single thread.
1990 Switch to using Subversion
1991 kes Remove src/pygtk-console/ from configure
1993 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1994 plus the entrypoints.
1995 kes Apply patch supplied that corrects debug print
1996 in canceling jobs for max run time. Supplied as
1997 part of bug #621, which was previously fixed.
1999 kes Test on job_canceled() and sd_msg_thread_done inside
2000 loop starting the message thread to avoid a race condition.
2002 kes Remove rl_catch_signal from console.c as it conflicted
2003 with the header definition. Fixes bug #765.
2004 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2006 kes Clarify some stored/acquire messages to indicate if the
2007 problem is with read or append.
2009 kes Fix memory leak with storage ids in cats/sql_get.c
2010 kes Terminate watchdog earlier to avoid reference to released
2011 memory -- reported by Jason Austin.
2012 kes Move closing the database from jobq.c to the director daemon
2013 termination routine. This fixes memory leaks for shadow jobs
2014 (i.e. migration jobs).
2015 kes Free up the unique jobid chain items in migrate.c. This fixes
2016 a memory leak problem.
2017 kes Convert some ugly looking for statements to use foreach_alist
2018 in findlib/find.c. This will facilitate converting the structures
2019 to use dlist (for large include/exclude lists).
2020 kes Fix a bug in the btree.c and btree.h routines, then rename them
2021 rblist and add them to be built in src/lib. Include some new
2022 methods written by Rudolf Cejka that make the code more readable
2023 (hides some of the ugly casting).
2024 kes Add set_next() and set_prev() methods which make the code much more
2025 readable. Also add a new dlistString class that facilitates storing
2026 strings in dlists. To be used in the large include/exclude lists.
2027 kes Make some trivial modifications to lib/tree.h that use rblist
2028 rather than dlist for storing the tree links. This was suggested
2029 by Rudolf Cejka. The result of this is that the restore tree now
2030 uses red-black binary trees rather than simple linked lists. This
2031 should give rather dramatic speed improvements for directories
2032 contining large numbers of directories/files (more than 10000).
2034 kes Fix maxruntime bug #621.
2036 ebl Implement the include JobID in spool file name project.
2037 kes Reorder projects file in order determined by Jan 2007 vote.
2038 kes Implement item #12 on project list -- quick release of FD by
2040 kes Fix open of SQLite3 db where user does not have write permission
2041 so that DIR does not crash. Fixes bug #761.
2043 kes Add back missing @ in Win32 Makefile.
2044 kes Change 'Device not configured to autolabel' from INFO
2046 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2047 which should restart an indefinite # of times.
2048 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2049 other DIR specifications.
2051 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2052 Fix path quoting in SQLite scripts.
2053 Fix problems with SHGetFolderPath.
2055 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2057 kes Fix Job restart on error bug that promotes an Inc to a Full
2058 backup. This should fix bug #755.
2059 kes Add qt-console and first cut of code.
2063 kes Fix Bacula->Documentation link on Win32 to point to index.html
2064 instead of bacula.html. Fixed bug #750.
2065 kes Return JobId in db_get_job_record() when JobId==0. This should
2067 kes Do not release source pointers when restarting a failed job.
2069 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2070 This *should* fix bug #747.
2071 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2074 kes Modify USTORE constructor to set an empty store_source string,
2075 and don't copy the store_source string in a cancel. Hopefully
2076 this will fix Arno's seg fault, bug #744.
2077 kes Add back code to disable conio in configure. Fixes bug #743.
2078 kes Correct the Options scanner in the FD to correctly handle
2079 SHA1 option, which was eating the next option. Reported by
2081 kes Add code to indicate when the SD is spooling, spool wait, and
2082 despooling as requested by Alan Brown.
2084 Version 2.0.0 released: 4 January 2007