1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
34 kes Add a mtx-changer.conf file that is not overwritten during
35 an upgrade. It fully configures the mtx-changer script.
36 kes Clear in-use bit on vol when unused while swapping.
38 kes Remove sleep at end of ./bacula
39 kes Clear hash packet for hardlinked files correctly. This corrects
40 a long standing bug where hardlinked files selected individually
41 would occasionally not be restored.
43 kes Apply Eric's patch to ensure that autoprune does not return
44 a Volume not in the autochanger unless requested to do so.
45 kes Correct bat restore display of multiple drives. This fixes
47 kes Do find_a_volume() each time an unload is done. This
48 fixes the failure of maxvol2-test.
50 kes Add some SD debug code.
51 kes Do find_a_volume() each time an unload is done.
52 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
53 and adds --with-db-port to ./configure.
54 kes Use Qmsg() in job.c watchdog callback.
56 kes Release main control rwlock if ABORTing.
57 kes Make watchdog connect timeout queue messages rather than sending
58 directly to avoid lock conflicts with the real thread.
59 kes Add const char in dbd.c to avoid compiler warnings.
60 kes Fix python compiler string warning. Note, IMO the GNU C++
61 compiler guys have made a *very* bad change to their compiler.
62 They now force all strings to be 'const' unless you explicitly
63 cast them, which is extremely ugly and ruins nice code as well
64 as creates a lot of useless work.
66 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
67 mt. This fixes bug #1116.
68 kes Add const in python files to reduce compiler warnings.
69 This may have to be backed out because of later compiler
71 kes Fix failure of 2drive-concurrent-test. Always read label;
72 clear_unload() only after drive is defined in acquire_for_read().
74 kes Generally clean up the manual tape loading code. The main
75 conceptual change is that when a volume is marked to be unloaded,
76 its volume name is retained, and it is only marked as unloaded
77 when either the autoloader says it is unloaded or another tape
78 is read on that drive.
80 kes Add debug code and refactor subroutine in stored/mount.c
81 kes Fix format problem in bscan output reported in bug #1105.
82 ebl Fix get_next_volume_for_append logic with autochanger
83 - use pruned volumes if found
84 - don't reset the inchanger flag after getting a recycled volume
86 Fix recycle_oldest_purged_volume to take InChanger flag in account
88 ebl Add mmap/unmmap implementation for tokyodbm under win32
90 kes Make first step toward eliminating globals from config
91 scanning. Also should be a workaround for FORTIFY_SOURCE
92 GNU C bug -- fixes bug #1042.
94 kes Apply duplicate job tests to restarted jobs.
95 kes Copy more data when restarting a job so that run
96 overrides are kept. This should fix bug #1094.
98 kes More word alignment cleanup.
99 kes Fix bug where SD did not ask operator if the device could not
100 be opened. Reported by Eric.
102 kes Add dbuser to DIR conf file (replaces user).
103 kes Add --with-db-password to ./configure
104 kes Fix regress to handle db_password.
105 ebl Add new "status storage slots" that list autochanger
107 ebl Update vtape driver to compile only under Linux.
108 ebl Fix a bug when restoring with a wrong mediatype.
110 kes Eliminate ints from conf files and structures to avoid
111 word alignment problems
113 kes Fix bug reported by Scott Barninger where the bacula script
114 refers to scripts in the wrong directory. Needed to meet the
115 requirements of recent FHS location changes.
116 ebl Disable vtape for FreeBSD.
118 ebl Modify disk-changer to check if slot contains something before
121 ebl Fix vtape on win32 and debian.
122 ebl Fix autoselect patch (cause segfault).
124 ebl Fix autoselect option broken for a while. Fix #1089. Need some
125 work with StorageId to be able to use a particular drive in a
128 ebl Rename vtape to vtape.
129 ebl Update vtape driver.
131 ebl Modify vtape driver to avoid sparse file.
132 kes Add make clean of qt-source directory during ./configure
133 kes Store last block number written to tape in DEVICE and
134 use it for testing for correct last block on EOT.
136 Release Version 2.4.0:
140 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
141 This fixes bug #1095.
143 kes Add create_postgresql_database.sql to Win32 installer. Should
144 fix problem reported by Juilio Monteiro.
145 kes Get correct slot when auto unloading a device. This fixes bug
148 kes Fix multiple media restore.
149 kes Make DEVICE Slot private and access it via a method.
150 Allows better control over when it is set and cleared.
151 kes Fix possible seg fault if SQL error.
153 kes Add Martin's fixes to argument scanning for the estimate
154 command. This fixes bug #1093.
155 kes Add debug code to SD.
156 kes Fix renaming a Volume, which used the wrong Volume name.
158 kes If operator has rewind tape, print warning, release tape and
159 try once more. If tape is positioned somewhere, something went
160 wrong, so mark the tape in error and try once more. Previously
161 this error was fatal, now it produces an error message.
162 kes Ensure correct volume name displayed during restore
163 kes Ensure that Volume is mounted for restore.
165 kes Fix a few more Coverity reported problems.
167 kes Apply Allan Black's status dir job count patch.
168 ebl Add information about IMPORT/EXPORT slots in mtx-script.
169 kes Enhance a couple of SD debug messages.
170 kes Tweak unload flag setting and ensure it is set during swap.
172 ebl Fix #1091 about bad output in estimate command.
174 kes Modify autochanger locking to attempt to avoid race
176 kes Make sure device not busy before doing label command.
177 kes Display open() errors except when polling. Previously too
178 many were suppressed. This should fix bug #1070.
179 kes Fix Win32 reparse points. Bacula will not recurse into any
180 reparse point directory, including mount points, unless the
181 directory is explicitly mentioned at the top level (same as
182 with Unix). A file that is linked to another file will be
183 backed up -- much as Unix does for hardlinked files.
184 This fixes bug #1041.
186 kes Remove double quotes from ChangeLog and ReleaseNotes
187 kes Remove StorageId test when pruning and recycling (Eric's changes).
188 kes Remove old form of locking when getting volumes -- causes deadlock.
189 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
190 the name unique and to eliminate compile time error.
191 kes Add accurate.o to Win32 FD Makefile
193 kes Fix cats dll build on Win32 after db_update_job_end_record
194 calling sequence change.
195 ebl Switch to tokyo dbm instead of htable in accurate code
196 ebl Include tokyo dbm to bacula source tree
198 kes Fix buffer overruns detected by Coverity.
200 kes Tweak joblog display.
202 kes Implement --without-qwt
203 kes Fix layout of restore tree dialog
204 kes Add configure bat QWT libraries, so that bat can be built
205 with or without the QWT libaries.
207 ebl Add dummy tape driver for regression tests.
208 kes Make sure we unload the right slot when swapping.
210 kes Add debug times, reduce size of two-pool-changer test
212 ebl Tweak autoconf scripts for vtape
214 kes Improve SD reserve debug code.
215 kes Testing an improvement to free up volumes no longer in use.
217 kes Rework SD acquire for read to handle autochanger Volume
219 kes Implement regression that explicitly tests swapping a Volume
220 from one drive to another.
221 kes Enhance disk-changer to detect most error conditions.
222 kes Fix SD code so that it properly swaps a Volume between drives.
223 This fixes bug #1083.
225 kes Apply libdbi patch from Joao Freitas for regress and for
226 Bacula trunk. Regress now works with libdbi. Nice.
227 kes Apply .nobackup patch from bug #1077 submitted by
229 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
230 name into jobs cloned via the run directive.
232 kes Prevent a Volume that is being swapped from being freed from
233 the volume list. This will most likely fix, at least partially,
235 kes Fix strippath so that it does not get a buffer overrun and crash FD.
236 This fixes bug #1078.
237 kes Remove 50 millisec wait in SD that broke debugger.
238 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
239 that a job may run, counted from when the job was scheduled.
240 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
241 a job may block waiting for a resource, counted from when the job starts
242 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
243 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
244 that implements multiple commands per line in the console when using
245 readline. Modify the default to use a semicolon as the command separator.
247 ebl Fix SQL query in migration code.
248 ebl Make accurate mode with hash disk pass regression tests
250 ebl Implement first cut of accurate backup with hash disk.
252 kes Force unload of volume when wrong volume mounted in SD.
254 kes Fix bat seg fault at termination.
255 kes Add Bacula generated version to bat about box.
258 kes Experiment with allowing multiple read jobs.
259 kes Move final volume swapping code to DCR method and
260 call it from acquire_for_read().
261 kes When wrong volume is mounted during read, unload_autochanger.
263 kes Integrate the libdbi changes from Joao Henrique Freitas
265 kes Stop searching for Volumes in SD askdir if DIR returns the
266 same volume name twice in a row.
267 kes Close bat console windows first to eliminate error message
270 kes Tweak the swap Volume from one drive to another code so that
271 it now seems to work.
272 kes Resolve several problems with recycling that broke the new
273 code (these problems are in 2.2.9 as well).
274 kes Remove the volume lock when calling the sysop code.
275 kes Don't mark a reserved volume with no writers as unused otherwise
278 kes Rework class structures for VOLRES, DCR, and DEVICE to make
279 the method names a bit more logical, and for more logically
280 handling the responsibilities.
282 kes Remove redundant code in terminating the scheduler that just
283 causes a seg fault in many cases.
284 kes Cleanup releasing a volume and make it a DCR method.
285 kes Improve algorithm for detecting pre-reserved volume and
288 kes Tweak volume swapping code so it works.
289 kes Correct name overloading in mount.c
290 kes Replace released flag in VOLRES with reserved and add access
291 methods for the VOLRES class.
292 kes Prevent volume from being released while being swapped.
293 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
295 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
297 kes Refactor parts of stored/mount.c
299 ebl Add sanity checks for VolWriteTime and VolReadTime
300 ebl Take care of bad clock changes while computing VolWriteTime
301 and VolReadTime. This should fix or limit #1066
302 kes Correct error string numbers in dird/catreq.c
303 kes Restructure reserving, acquiring, and mounting volumes. Calls to
304 autochanger are deferred for mount.c -- simplifes the code.
306 kes Do not prune any running job. It just fails the job.
307 kes Lock the volumes when changing dev->reserved_device and marking
308 the volume unused otherwise the device can get reserved by
309 another job before the volume is released, thus blocking it.
311 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
312 kes Fix bug #1063, reuse of freed ptr in list nextvol.
313 kes Release regex compile buffer in filed/job.c
314 kes Add proper type of const char in sql_create.c
315 kes Turn off debug in daemon termination routines
316 kes Move free_volume_list() before devices are freed in stored.c
317 kes Fix reference to uninitalized stack variables in bregex.c.
318 This should correct bug #1067.
320 kes Fix possible seg fault in SD when freeing a volume entry.
322 kes Implement unload_dev() before swap device.
323 ebl Add statistics prunning with option and menu
324 kes Separate unload_dev() from unload_other_device() in autochanger.c
326 kes Apply patch from bug #1069 that corrects spurious error messages
327 when ACLs enabled on SGI but no ACL exists.
328 ebl Fix small segfault in bacula-sd when debug level is 500
329 kes Modify run_program() and run_program_full_output() to use
330 call by reference for the results string. This corrects a long
331 standing problem where the address of the string may be changed
332 in the subroutine but not in the calling program.
334 kes Re-enable code to remember last volume mounted on a non-tape
336 kes Add patch supplied in bug #1068 that fixes a SD crash when using
337 a Virtual autochanger.
338 kes Generate correct JobMedia records during spooling/despooling when
339 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
340 <tih@hamartun.priv.no> for excellent analysis and testing.
342 kes Tweak hash algorithm for htable using Martin Simmons idea
343 for doing a circular shift.
344 kes Remember what volume is in VTLs (previously turned off for
346 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
347 pointed out some problems in creating JobMedia records during
348 spooling with concurrent jobs. Fix the problem by updating the
349 start file position before despooling and generate a jobmedia
350 record at the end of despooling.
352 kes Fix handling of JobMedia records during spooling and when a
353 Volume is changed without actually writing data to the Volume.
355 kes Rework certain SD locking based on gdb tracebacks of deadlocks
356 sent by Eric. This code now uses only the volume_lock() rather
357 than the reservations lock when at EOM and acquiring a new
359 kes Ensure only one exit point in several subroutines.
361 kes Implement bsock code to permit locking. Use the new code in Verify
362 in the FD to prevent the heartbeat thread from disrupting the Verify
363 data sent to the Dir.
364 kes Modify SD locking to eliminate locking the reservations system from
365 outside the system. Use the volume lock when getting media data
366 and reserving a new volume at end of media.
367 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
368 when SD starts are not locked into place.
370 kes Fix error compiling runscript code on 64 bit machines.
371 kes Tweak Win32 mount point code.
372 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
373 cleared giving bad file estimate).
374 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
377 kes Keep Schedule run lists in order as suggested by
380 kes Implement autostart scripts for Debian.
381 ebl Implement upgrade catalog scripts.
383 ebl Apply jobstat patch for long term statistics. Have to implement
384 purge stats command and upgrade scripts.
385 kes Fix mtx-changer.in for broken Debian mt program.
387 kes Fix large number of JobMedia records reported by Eric Bollengier.
389 kes Apply doc fix from bug #1062.
390 kes Resolve crash and improper restore wx-console Win32 restore
391 GUI. Fixes bug #1065.
392 kes Update Win32 wxWidgets to latest version.
393 kes Attempt to do correct handling of Win32 mount points. Should
395 kes Fix Win32 FD backup/restore memory leak due to improper termination
396 of BackupRead/Write. This fixes bug# 1038.
398 ebl Reduce memory usage for accurate backup, working only with ctime
399 and mtime. (not all Lstat field)
400 About 40MB for my Linux system (400.000 files)
402 kes Add dcr->reserved_volume flag that allows us to release a volume
403 even if it is not vol->released. This allows maxvol2 to work when
404 Volumes expire and we are already writing to the device (i.e. a
405 volume is pulled out from under us by another job terminating after
406 we reserve the drive).
408 ebl Permit multiple command/console per runscript definition.
409 RunScript { command = /bin/true ; command = /bin/false ... }
410 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
411 (restart an application) just after the VSS snapshot on windows.
412 kes Don't zap dcr values during release_volume() as they might
413 have the next Volume to be mounted.
414 kes Fix AIX prototype.
416 kes Second cut of drive switching during backup.
419 kes Update Win32 version of wxWidgets to most recent version.
420 kes Tweak Copy job details.
421 kes Rework dir_find_next_appendable_volume to make a bit more effort
422 to find a suitable volume before giving up.
424 kes Make ask_sysop_to_create... to return if waken from wait.
425 This helps get out of blocked conditions.
426 kes Experimental implementation of switch_device in reservations.
427 kes Implement FD version to allow easier protocol changes.
428 kes Add Plugin Options string -- not yet passed to FD.
429 kes Implement PluginOptions ACL.
431 kes Attempt to correct problems with restores with autochangers and
432 use counts going negative
433 kes Rework SD status command and implement API for bat. Implements
434 header, runing waitreservation, devices, volumes, spooling,
435 and terminated status keywords.
436 .status storage=xxx <keyword>
437 kes Clarify TLS error message by adding double quotes around name.
438 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
439 kes Pass jcr to tls routines so debug messages can be handled better.
440 kes Rework jobq resource allocation code, and possibly fix a bug
441 that caused reference counts to get out of sync.
443 kes Rename fd/dir plugin to use Bacula standard underscore.
444 kes Plugin work -- bring dir up to fd level.
445 kes Start implementation of VTL code
446 kes Fix Win32 build after adding new cats subroutine.
448 kes First cut at Duplicate Job implementation.
450 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
451 kes Start PluginOptions string, and refactor a bit of ua_run.c
452 ebl Apply Allan patch that permit to reset recyclepool.
454 kes Test patch -- possible fix or improvement for bug #1053
455 kes Refactor FD and SD status commands to permit new API code in
456 SD, and to fix Win32 build.
457 kes Win32 build is now working.
459 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
460 some ideas in patch from Scott Bailey.
461 kes Begin implementation of duplicate Job control.
462 kes Fix some of Win32 build after recent additions.
463 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
464 which causes the FD to detect whether or not the OS has the
465 honor no dump bit (*BSD systems), and if so, to skip backing up
466 any file with this bit set. The feature is enabled by setting
467 'honor no dump flag = yes' in the Options section of a FileSet.
469 kes Correct po warning message with datarootdir
470 kes Implement more code in dird.c to put configuration parsing in
471 a class rather than use globals.
472 kes Restructure SD status command for implementation of bat API
475 kes Suppress incorrect 'Will not descend from x into y' messages.
476 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
477 daemon globals used by parser.
478 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
480 kes Fix free of plugin_list when none exists.
482 ebl Apply accurate project patch.
484 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
485 on non-mempool object)
486 kes First cut of converting FD .status to work with bat API.
488 .status client=XXX header
489 .status client=XXX running
490 .status client=XXX terminated
491 kes Implement first cut of Copy Job.
492 kes Implement Catalog in Pool resource. It overrides catalog specified
493 in the Client resource.
495 kes Apply patch (with some difficulties) from Joao Henrique Freitas
496 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
498 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
499 ftruncate() actually works. In the case of some (cheap) NAS devices,
500 it does not, and so recycling NAS Volumes does not work. The code
501 simply unlink()s the file, then recreates it. This fixes bug #1011.
503 kes First incomplete cut of big malloc blocks for htable.
504 kes Tweak plugin code.
506 kes Plugin debug code + tweak a couple bat dialog layouts
508 kes Fix creating first JobMedia record during Migration to include
509 proper index. This caused slow restores of migrated jobs.
510 kes Temp fix to plugin name file_index.
511 kes Bacula backed up and restored a MySQL database.
513 kes Implement plugin restore.
514 kes Implement parsing of db_driver to give db_type index.
516 kes First cut of plugin restore code.
517 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
518 and do not strip paths on symbolic links.
519 kes Set catalog backup database and user name from values specified on
520 the ./configure line.
521 ebl Fix #1031 about wrong pool source information in job report.
524 kes Remove a redundant jcr argument to find_files, match_files, and
526 kes Implement '.status dir header|scheduled|running|terminated' that
527 prints the requested status section. With the exception of the
528 header, the other reports have fields separated by tabs (\t).
530 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
531 a resource embedded run command to find a since time if no explicit
532 since time was supplied on the command line.
533 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
534 that updates the state file at job termination time in addition to
535 when the daemon terminates.
537 kes First version where a plugin did a backup.
538 bpipe-fd.so created a backup file, wrote a test
539 string to it, and Bacua could restore this fabricated file.
541 kes Implement DB Driver = string for the DBI driver.
542 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
543 kes First cut of code for loading Win32 plugin dlls. Implement
544 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
545 and implement a dlfcn.h file based on opengroup's definitions of
548 kes First cut plugin directives.
550 kes Apply patch from bug #1049 to prevent stripping the path on a
552 kes Attempt to fix bug #1047 where stripping a path corrupts the
553 heap. Waiting for feedback.
554 kes Correct the Mount message not to suggest labeling a new tape
555 when doing a restore. Submitted by email by John Stoffel.
556 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
557 FD by using casting. Reported in bug #1042.
559 kes A bit of crypto cleanup. More later.
561 Release Version 2.2.8
563 kes Apply patch from Martin to correct bug #1040, bscan sets existing
565 kes Fixed important spelling error in doc -- bug #1045.
567 ebl Fix bextract to be able to extract non-portable Win32 data to
569 kes Move initialization of read/write res lock earlier in the code.
570 This fixes the crash with a null conf file. This fixes bug
572 kes Redefine CURES in lib/parse_conf to be URES and move it all
573 into lib/parse_conf.c -- this responds to bug #1042, but does
574 not fix it. The fix is not to compile with FORTIFY_SOURCE.
575 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
576 the trunk SVN. I don't think this was reported as a bug.
578 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
580 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
582 kes Add DataDespooling and DataCommitting status (committing is
583 the last despooling).
584 kes Finish implementation of new reservations code noted below.
586 kes Fix bsnprintf for float point numbers. I broke recently when
587 parameterizing some variables. This fixes bug #1036.
588 kes Undo recent reservations changes ... will apply them later
589 when they work better.
591 ebl Fixes #1034 which cause mysql to hang the connection after 8h
592 ebl Change default statistics target of filename.name and path.path
593 fields for PostgreSQL. This speeds lookup by indexes. Thanks
595 kes A few more tweaks to new reservation code. Make sure to clear
596 vol released flag when retaking volume. When reading label and
597 label is bad mark volume unused. When recycling, mark volume
598 unused so it can be renamed.
600 kes Fix reserve_volume() so it doesn't release a volume in use
601 (i.e. a volume entry not marked released). This should be
602 the last part needed to fix bug #1018.
604 kes Move Heartbeat documentation from Job to Director resource.
605 This fixes bug #1033.
607 kes Fix existing switch drive SD code to call autochanger to release
608 any old volume. This must be done to keep the autochanger from
609 releasing subsequently newly reserved volumes in doing a close().
610 This should fix bug #1018.
611 kes Fail if attempting to get console input in batch mode. This
612 should help fail RunScript console commands that are incomplete.
613 kes First cut implementing switch_drive() in SD (not actually called).
615 kes Implement first cut running console commands in a RunScript.
617 ebl Fixes bug #1028 where 'Selection Type' option was not usable
619 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
622 Release Version 2.2.7
624 kes Add new free_tls() entry point so that Win32 builds.
625 kes Fix compile warning in src/lib/util.c
626 kes Fix entry point for edit_job_codes() so that Win32 builds.
627 kes Fix seg fault Frank Sweetser reports in regression testing
628 on his systems. The problem was that the original author of
629 bsnprintf.c did not take into account the side effects of
630 using ++x in the argument to a #define.
631 kes Make SD protocol backward compatible with version 2.2.x.
633 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
634 because Bacula no longer restores sockets.
635 ebl Always use ignorecase fileset option on win32 FD.
637 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
638 that implements double quoting include names in conf files,
639 and also allows piping input by having the first character
640 be a vertical bar (|).
641 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
642 that implement %f in RunScripts to pass the FileSet name.
643 kes Skip leading | when lex input comes from a pipe as suggested
644 by Michael Stapelberg <michael@stapelberg.de>.
646 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
647 Nerijus Baliunas <nerijus@users.sourceforge.net>
649 kes Implement Plugin Directory and plugin events.
651 kes Implement a security enhancement: TLS authentication but no
652 encryption. Enabled by setting 'TLS Authentication = yes'.
653 Note when this is on, TLS encryption is turned OFF!
655 kes This patch corrects a problem where the maximum concurrent storage
656 jobs counter gets out of sync during restore jobs causing jobs to
657 'wait on max Storage jobs'. This patch fixes bug #1009.
659 kes This patch fixes bcopy so that it produces correct Volumes.
661 kes This patch eliminates spurious output to the console during a VerifyVolume
662 job that contains encrypted data. It fixes bug #1024.
664 kes This patch prevents the 'status dir' command from trying to use a scratch
665 volume and possibly moving it from one pool to another. This patch fixes
668 kes Add new include to postgresql.c suggested by Marc Cousins so
669 that it compiles correctly with pgre version 8.3.
671 kes Fix --archivedir addition to configure. Replace it with
672 --with-archivedir in configure.in This fixes the regression
674 kes This patch fixes bug #1012 where the job is canceled because
675 of Max Run Time exceeded when the job has not yet started.
677 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
678 one 'part' to write. Instead of each part being stored on disk,
679 written to DVD, then deleted from disk, all parts are written to disk,
680 and only the last is written and deleted from disk.
681 kes This patch fixes the status command to include the formating string for
682 JS_AttrInsterting. It fixes bug #1021.
683 kes This patch should fix the Mac OS X build problem on the latest
684 Darwin, where sys/types.h was not included correctly (apparently
685 due to a change in the Mac headers). The solution was to explicitly
686 ensure that it is defined for the ./configure.
687 This patch also has a rebuild of configure that includes the Debian
688 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
689 kes This patch should ensure that queued messages to the console are
690 displayed as soon as possible. It should fix bug 1007, but has been
691 reported not to work.
693 kes This patch fixes the infinite loop when trying to increase the
694 maximum number of volumes in a Pool during the add command.
695 This patch fixes bug #1008.
697 Release Version 2.2.6
699 db Remove extra data on estimate command in joblist for bat.
701 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
702 really change anything, but is the beginning of doing it *right*.
703 To do it completely right the LastWritten date must be passed to
704 the SD, but it is not yet done.
705 kes Minor tweaks to some bat restore SQL.
706 kes This patch fixes bug #1003 where putting the message output from
707 a Verify job into the catalog results in a recursive loop. The problem
708 seems to show up only with postgresql (to be verified).
709 kes Correct %x to %p in postgresql debug statement.
711 kes Fix bug #942 where lots of emails where generated when the heartbeat
712 interval was low and Bacula wanted a different tape from the one in
715 ebl Add new SD despooling attributes and Dir inserting attributes
716 job status codes in the catalog (Status table).
718 ebl Use qmake-qt4 instead of qmake when available (debian system).
720 kes Add a security warning to src/cats/make_catalog_backup.in indicating
721 that passing the password via the command line (arg 3) is insecure.
722 This responds to bug #990 (it doesn't fix it).
724 kes Set default debug_level to zero. This corrects bugs #991 and #993.
725 kes Fix a crash in bat when it cannot connect to the Director for example
726 if the Director is not running.
727 kes Remove redundant INDEX (JobId) from File table in the trunk.
729 kes Make explicit exception to GPL in LICENSE to permit linking
730 the Win32 FD with Microsoft VSS code.
731 kes Apply the Solaris package patch from
732 Masopust, Christian <christian.masopust@siemens.com>
733 kes Apply the patch to optionally add a timestamp in the debug output
734 submitted by Mariusz Czulada <manieq@wp.eu>.
736 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
737 backend (sql_strerror). Fixes bug #989
739 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
740 It applied with no problems.
741 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
743 kes Redirect stderror to stdin on mt status command in mtx-changer.in
744 since the status is returned on stderr on Solaris.
745 kes Activate Close button on tray-monitor window. This fixes
747 kes Check for NULL item in parse_conf.c before calling it. In the
748 case of Device, there is no item and this caused a seg fault when
749 Device appears in the conf file.
750 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
751 avoids pulling in config.h multiple times in some new code.
753 kes Fix spurious warning message printed when creating a volume with
754 a LabelFormat. This fixes bug #976.
756 Release Version 2.2.5
758 kes Add JobId in place of Job name in all the Jmsg() output.
759 kes Correct the APP_DESC for the Win32 storage service (remove an e).
761 kes Make maxvol-test and new more strict maxvol2-test work.
762 kes Print JobId in all Jmsg() job output.
764 kes Add new SD despooling attributes and Dir inserting attributes
765 job status codes. This fixes bug 961.
766 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
768 kes Fix doc issue. This fixes bug #963.
769 kes Fix listing performance problems in bat. Pointed out by
771 kes Remove old debug code.
772 kes Fix bat code that tests for Win32. This should fix bug #968
773 kes Query 5 list wrong Vol after migration. This fixes bug #960
775 ebl Fix #969 where user can't change Replace option in restore menu.
777 kes Save jcr in thread specific data (tsd) for each thread.
778 kes Make Dmsg() print JobId as -%u.
779 kes Make Jmsg, Emsg, and others automatically pickup the jobid
780 for the thread if it exists.
781 kes Remove old reservation debug jid code.
782 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
783 ebl Add an option that permit to specify spool size in job
784 definition. (Applying patches/testing/spoolsize_per_job.patch).
785 You must upgrade SD and DIR at the same time.
786 dvl Add new configuration item --archivedir
787 dvl Adjust regression tests to use tmp not /tmp. This will allow
788 multiple concurrent runs of the regression tests.
790 kes Fix race condition that drops final block written to volume.
791 This happens in rare cases with multiple simultaneous jobs
792 when the Volume fills. This fixes bug #964. May be related
793 to bug #935 and possibly #903.
794 kes Eliminate more strerror() and replace with bstrerror().
795 kes Remove BSD getopt and replace with unrestricted IBM version.
796 kes Fix Win32 build for changed calling sequences.
797 kes More tweaks to the mount volume routines to get everything
798 right. Changed variable name from find to have_vol, which is
799 much easier to understand.
800 kes Enhance btimer debug code.
802 kes Fix FD->SD authorization failure, which was due to spurious
803 wakeups from a pthread_cond_timedwait(). Simply check the
804 predicate before continuing. This fixes bug #953.
805 kes Add const char where needed (more to do). Remove temp debug code.
807 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
808 kes Don't overwrite error message in check_tables_version.
810 kes Unlock batch insert tables with same calls used elsewhere.
811 kes Allow starting 59 jobs a second.
812 kes Make SD session key more random.
813 kes Add retry for SQLite opening db if it fails. Probably helps
815 kes Suppress extra error messages during batch insert failure.
817 kes Add jcr to timer packets so if killed message can be sent to job.
818 kes Add JobId to all Dmsg() output.
819 kes Put some FD auth code on dbglvl rather than fixed.
820 kes Return insert attributes error message in db msg buffer to avoid
821 false error messages. Helps fix bug #966.
822 kes Separate batch init error messages. Probably helps fix bug #966.
823 kes Make SD code that contructs attribute insert check string lengths
825 kes If Dir gets an error during inserting attributes, cancel SD.
826 This reduces unnecessary error messages.
828 kes Correct search boolean for getting Volume info
829 ebl Cleanup batch insert code. Probably fixes bug #965.
830 kes Back out one small change to the reservation system (reserving a volume).
831 kes Rework how a Volume is mounted. It is now much more intelligent and
832 will always attempt to use any mounted volume if possible and reduces
833 calls to the Director asking about volumes.
835 kes Turn off some code when batch insert not enabled.
836 kes Edit FD name in connect error messages.
837 kes Rework the reservation system to take into account that the Director
838 might give us a Volume that is different from the current one being
839 used, and to ensure that we don't exceed Maximum Volume Jobs.
840 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
841 fatal error with multiple jobs running'
842 kes Add more debug code in reservation system.
843 kes Implement maxvol-test to check bug #947.
845 kes Add code to handle tray monitor separated from Win32 FD.
846 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
848 kes Add missed return in fixing verify bug -- trunk only.
849 ebl Fix a command parser issue causing a director segfault.
850 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
852 kes Increase the max block size to 4MB fixes bug #957.
853 kes ERABT if user sets min block size > max block size. Fixes bug #956.
854 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
855 is not properly mounted (recognized) during a poll.
856 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
857 Job that has differences reports Verify OK.
858 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
860 ebl Add an option to operate on all pools with update vol parameters.
861 This complete the project 20. Patch from Nigel Stepp.
862 ebl Add history support to bconsole when using readline.
863 Using Ctrl-D to exit doesn't update .bconsole_history
864 kes Modify new volume algorithm to use max MediaId for generating next
865 volume number rather than the count of Volumes. This should essentially
866 eliminate the failure rate if some volumes were deleted. Bug #921.
867 kes Begin implemention of Optimize Job Scheduling.
868 kes Implement restore callback that Dirk and I agreed on for bat
869 restore. This fixes bug #928. Restore of backup of zero files fails.
870 kes Fix SQL Catalog logging which broke with new db_escape_string
873 Release Version 2.2.4
875 kes Fix bacula_cats.def for new db_escape_string().
876 kes Increase size of name string when FD making connection to SD.
877 May fix bug #953. FD->SD connection failure.
879 kes Add code to help Dan debug 2drive-incremental-2disk test.
880 kes Add code to try to fix bug #908.
881 kes Add waits to multiple exit detection code to try to force pid
882 file to always be deleted.
883 kes Restore good dev.tar.gz to rescue set appropriate binary property.
885 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
886 trying to switch drives by checking for blocking before unblocking.
888 kes Cancel storage daemon in all cases where FD reports error. This
889 should fix virtually all cases of bug #920.
890 kes Fix db_escape_string() for MySQL which did not compile.
892 kes Fix error message that was clobbered when Dir tells SD it does not
893 have write permission on Volume. This should fix a minor point
894 in bug #942, but not the main problem.
895 kes Add code to cancel job in SD if FD connection fails. This should
897 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
898 dvl Pass jcr and db into db_escape_string() to enable better escaping
900 kes Fix migration code to get correct Volume name with multiple volumes
901 by skipping |. Fixes bug #936.
902 kes Implement patch supplied by Landon to fix bug #944 where using
903 TLS with bconsole uses 99+% of the CPU.
904 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
906 kes Move patches into patches directory.
908 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
911 ebl Using 'm' in bconsole will show messages like before,
912 and not memory usage.
913 kes Fix bug #935, and probably also bug #903 where files were not
914 restored. MediaId was not properly set in JobMedia record after
917 kes Suppress chown and chmod error messages if the FD is not running
920 kes Apply Martin Simmons' patch that should turn off the new API usage
921 when batch insert is turned off allowing building on older
923 kes Add ./configure search in qwt-qt4 for qwt package
925 kes Bacula is now free of 3rd party GPL copyrighted code!
927 kes Add guid_to_name.c/h which replace idcache.
928 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
930 ebl Detect if new PosgreSQL batch insert API is present.
931 kes Correct incorrect mempool call causing Director crash. Occurs on
932 systems without va_copy().
933 sb Update spec files for 2.2.1 release
935 kes Fix memory pool call in ua_output.c. bug #934.
936 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
937 Add test program to fnmatch.c
939 kes Integrate patch to README.vc8 from
940 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
941 edit it to get it into Unix patch format.
942 kes Implement mkpath.c to replace old FSF makepath.c
944 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
946 Release Version 2.2.1
948 kes Update POTFILES.in
949 kes Cleanup a few underquoted AC_DEFUNs in configure
950 kes Apply patch from Martin Simmons that adds a test for va_copy to
953 kes Fix bug #921 by increasing the number of tries to create a new volume
955 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
956 can be called multiple times. Implement a version for machines
957 without va_copy() that gets a big buffer.
959 kes Integrate more portable zone offset code into bsmtp.c
960 Submitted by Attila Fülöp.
962 kes Fix bad SD->FD return status reported by
963 (James Harper) <james.harper@bendigoit.com.au>
964 ebl Fix a bug in read_close_session which return random status
965 thanks to James Harper
967 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
968 and directory names during restore of single file/directories.
969 kes Add sanity checks to .sql command when string is empty. Hopefully
970 that will resolve Dirks Director crash.
972 kes Apply patch submitted by Martin Simmons that corrects a seg fault
973 in the bsmtp chat subroutine when debug is >= 10.
975 kes Fix Director crash when running bat SQL queries.
976 kes Add David's notes on Item 8: Copy pools.
978 kes Rework projects file to be current and ready for a vote.
979 kes Enhance lex scanner error message.
981 kes Tweak LICENSE file to mention BSD code.
982 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
983 if specified on the ./configure.
984 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
985 This class is intended to allow us to open a second bsock to the
986 Director while in the restore subdialog.
988 kes Fix configure to create bat Makefile before creating dependencies.
989 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
990 kes Add a tooltip to the tray monitor.
991 dvl Set the Director's PID file before dropping privs. This fixes
994 kes Update AUTHORs file
995 kes Increase the default max concurrent jobs to 20 in FD and SD to
996 correspond with the default .conf files.
997 kes Rewrite the Win32 service routines. This eliminates the 3 copies
998 some different, of the same file created by RN when porting the
1000 kes Rearrange some of the Win32 directories and the placement of the files
1002 kes Set DEVELOPER flag in version.h
1004 ========================================================================
1005 Release Version 2.2.0
1007 kes Apply a second doc patch from Marc.
1008 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1009 improves the tips section that discusses how to setup multiple
1012 kes Update bat README file.
1013 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1014 corrects a typo in the Recycle status check in db_find_next_volume().
1015 This will probably fix a number of annoying problems with multiple
1017 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1018 bnet calls -- no functionality change.
1020 kes Modify the Verify output to specify if files are missing on
1021 the Volume(s) or disk. Fixes confusion in bug #916.
1022 kes When more than one Volume is read in a migration job, the last
1023 Volume bytes reported are from the last read volume rather than
1024 the last written volume. Fixed. This fixes bug #910.
1025 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1026 It previously printed New Recyle flag is: no. This fixes bug
1029 kes Correct seg fault when switching tape drives during restore.
1030 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1031 be used until after 2.2.0 release.
1033 kes Remove fnmatch() in SD that permitted wild card specifications.
1034 This fixes bug #914.
1036 kes Fix %g in filename returned by SQL for browse tree reported by
1038 kes Fix configure so that it puts config.out in the cwd rather than
1040 kes Attempt to fix the locking problem reported by Eric in bug #906.
1041 kes Make berrno class to leave errno unchanged after constructor call.
1042 kes Make bnet_server use the heap rather than the stack to allocate
1043 its socket fd pointers to avoid a crash at termination. Problem
1044 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1046 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1047 and putting it in depkgs-qt along with Qt4.3.
1049 kes Rework code in acquire.c that switches drives for reading when
1050 the Media Type does not match. This should fix bug #906
1052 ebl Fix a director segfault during job setup #907
1053 kes Correct seg fault in postgresql when first operation returns no
1054 rows. Fixes Dirks File browser problem seg fault with bat.
1056 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1057 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1060 kes Implement PopUp YES/NO dialog for bat.
1062 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1064 kes Correct RunScript to terminate job in FD on failure.
1065 kes Change abort_on_error and AbortJobOnError to fail_on_error
1066 and FailJobOnError in RunScripts.
1067 kes Minor tweaks of code formating in RunScripts, principally to
1068 avoid depassing 80 columns.
1070 kes Eliminate one #ifdef Win32 in bsmtp
1071 kes Implement grow tool to grow a file for testing very large databases.
1072 kes Add big-vol-test to test Bacula seeking with > 5GB.
1075 kes Modify find_next_volume() to return all values in Media record.
1076 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1080 kes Update Release notes
1082 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1083 Warning, in previous beta version, all media get from scratch keep their
1086 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1087 This should fix bug #842. Made a note to look at removing the temp
1088 files at the end of the install.
1089 kes Add ability to mount and unmount a file device providing it is
1090 marked as being removable and has the appropriate mount and unmount
1091 commands defined in the Device resource. This fixes bug #830.
1092 kes When applying a storage override, release all previous storage
1093 definitions rather than just prepending the new storage.
1094 This should prevent a good deal of confusion.
1096 kes Implement ./configure search for qwt libraries.
1098 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1099 Win32 FD. This should fix bug #893.
1100 kes Remove an unnecessary beep in Win32 init code.
1101 kes Update copyright dates in Win32 executable about boxes.
1102 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1103 code with a BSD getopt.c and getopt.h.
1104 kes Remove sched.h from the Win32 compat directory -- not used.
1105 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1106 need to shut it down, do it through the services panel or the command
1108 kes Remove some inappropriate Bacula FSFE copyrights.
1109 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1110 kes Fix regress config non-portable test as pointed out by
1111 Florian Heigl <florian.heigl@gmail.com>
1112 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1113 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1115 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1116 Reported by Frank Sweetser.
1120 kes Fix client-only build.
1121 kes Integrate client-only fixes for bsys (initgroups) and conio from
1122 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1123 kes Make arguments to get_scratch_volume() in same order as other
1125 kes Rework the prune_volumes() subroutine so that after purging and
1126 no volume found in desired pool, it will check for a scratch
1127 volume. This prevents recycling the whole scratch pool.
1128 kes Add code to status storage to print boffset_t (largefile support).
1130 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1131 kes You now need a --with-qwt=<dir> to be able to build bat.
1132 kes Update src/win32/cats/bacula_cats.def to include the new
1133 db_get_query_dbids() call on Win32.
1135 kes Correct a problem when selecting a scratch volume and moving
1136 it to another pool that lost some columns.
1137 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1138 kes Enhance Autochanger error messages to include Volume and device name.
1139 kes Rework prune_volumes() code to take account of InChanger flag,
1140 and to handle recycling volumes going to the Scratch pool and
1141 current pool because the RecyclePool directive.
1142 kes Implement a better and more efficient db_get_query_dbids() to
1143 handle creating and passing back a list of DBIds.
1147 kes Start work on new more efficient DBId subroutine. First use
1148 will be for recycling volume to Scratch inchanger.
1149 kes Increase number of JobIds in pruning from 1000 to 10000.
1150 This to be replaced by above routine.
1151 kes Begin implementation of building Qt4 on Win32.
1152 kes Correct typo in fix I added for bad TLS shutdown.
1153 kes Pull 2.0.3 patches into patches directory.
1154 kes Update Release notes. Include qt-console in line count.
1155 kes Update Projects file.
1157 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1158 bug in migration code where a job that spanned two volumes
1161 kes Implement new BST_DESPOOLING blocked state. Change from locking
1162 during despooling in SD to blocking. This means that other threads
1163 can work with the device structure, in particular the reservations
1164 system while despooling.
1166 kes Fix return in reservation message queue that missed clearing
1167 the jcr lock (implemented 26Jun07 below).
1168 kes Rename a number of dev methods to make locking function names
1170 kes Document locking in lock.c. Move lock structures to new file
1173 kes Move reservations message lock to lock jcr only this
1175 kes Move main SD locking code into lock.c (new file).
1176 kes Update Win32 build to include lock.c
1180 kes Dirk committed the qwt library code for drawing graphs in bat.
1181 kes Tweak install of qwt so that it is integrated with ./configure.
1183 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1184 out by Eric (my typo).
1185 ebl Fix configure.in to get batch mode enable
1186 kes Return correct string from authenticate.cpp in bat when connecting
1188 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1189 spurious line drops when using TLS.
1190 kes Do not file reparse points when restoring a file that already
1193 kes Implement Windows reparse points -- similar to directories, but
1194 we do not descend into it. This is a first cut. They seem to
1195 be backed up, but restore is not yet tested.
1196 kes Remove restore_blocking in tls code when shutting a socket to leave
1197 it in blocking mode. Hopefully this will fix the encryption bug
1198 reported by Frank Sweetser.
1199 kes When opening a file for backup, tell the OS that we are going to
1200 read it sequentially -- optimization.
1201 kes Change variable names in authenticate_director() to not conflict
1202 with member names in bat. Caused great confusion with compiler,
1205 kes Queue openssl error messages in case of comm problem.
1206 kes Do shutdown() call if socket terminated.
1207 kes Remove some duplicated code in tls.c
1208 kes Move more of the bsock member variables into private and access
1210 kes Add Frank Sweetser's tls-test to the regression suite.
1212 kes Add Swedish sv.po file
1214 kes Don't print clock skew message in FD if less than 3 seconds diff.
1215 kes Add a bit of VSS info to status client.
1216 kes Implement a first cut of Vista VSS, using Win2003 code.
1218 Release: 2.1.20 beta
1220 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1221 loaded tape but uses first drive).
1222 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1223 This was indeed a Win32 issue.
1225 kes Simplify search of autochanger for in-use Volume.
1226 kes Fix exit condition of check for in-use volume. kes Remove
1227 inappropriate my_postgresql_free_result() in db_close()
1229 kes Fix bad return in FD when encryption signature not found.
1230 Probably caused a crash.
1231 kes Inhibit missing encryption signature error messages for
1232 file types where no signature computed.
1233 kes Correct inverted check on autochanger in reservation system.
1234 kes Tweak debug code in autochanger reservation.
1236 kes Add some additional locking in the cats directory in subroutines
1237 that modify packet variables called from batch insert.
1238 kes Rework how dcrs are allocated. new_dcr() can now be called
1239 with an existing pointer, and it will simply clean it up.
1240 This allows the reservation system to test various different
1241 devices, and will permit easy device changes.
1242 kes A bunch of changes all over to handle new new_dcr() calling
1244 kes Work more on the Volume management in the SD. Remember Volumes
1245 for tape drives and for autochangers (even virtual disk changers).
1246 kes When looking at the Volume list to reserve a drive, handle
1247 autochanger names correctly by interating through the changer
1248 devices. Also call the Director to see if a Volume is suitable
1249 for the current job.
1250 kes Fix some bugs in bscan. Make sure all media records are written.
1251 Make sure that valid JobMedia records are written for disk files.
1252 Previously they were completely wrong.
1253 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1254 that the URLs don't change and so that the developers will all
1255 work off the same copy. Rebuild from scrach.
1256 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1258 Release: 2.1.18 beta
1260 kes Fix seg fault in FD from incorrect digest size.
1261 kes Fix argument to non-OpenSSL crypto.c subroutine.
1263 Release: 2.1.16 beta
1265 kes Remove a few malloc()s from the encryption code.
1266 kes Use the class calls to bsock in filed/backup.c and restore.c in
1267 place of the old bnet_xxx code.
1268 kes Implement code that does an on the fly calculation of the
1269 signing digest during restore of encrypted files. It makes
1270 a best guess at the algorithm, and if it is not correct, will
1271 then revert to the old code which reads the file after it is
1273 kes Implement at least one missing crypto stream in stream_to_ascii()
1274 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1275 #877 where a reload with bad syntax causes Dir to exit.
1277 Cut: 2.1.14 beta (not released)
1279 kes Do not free a volume on a tape drive until another volume is
1280 mounted and read, or the autochanger unloads the volume.
1281 This should help the SD re-use volumes that are already mounted,
1282 and should fix bug #886.
1283 kes Apply patch from user brettedgar that allows gnome2-console include
1284 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1285 kes Apply patch from Lucien Weller that fixes day of week calculation
1286 because of DST flag problem. Fixes bug #887.
1288 kes Move find_next_appendable_volume() to after acquiring a valid device
1289 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1291 kes Unable to reproduce bug 872. However added additional testing for
1293 kes Bug #874 resolved by documenting SQLite limitations.
1294 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1295 kes Bug #881 resolved by removing typo in mtx-changer script.
1296 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1297 approval. Added a link to the wiki on the web page, and implemented
1298 a backup from http://paramount.ind.wpi.edu
1300 kes Fix update allfrompool to pass pool name.
1302 kes Convert to pure GPL v2 license.
1303 kes Fix sscanf problems reported by Peter Buschman that caused
1304 a bus error on Solaris.
1305 kes Rework (simplify) the select prompt in bat.
1306 kes Move get_jobid_from_tid() into lib and create a
1308 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1309 should definitely fix the problem of lost error messages in the
1311 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1312 kes Eliminate tcpd.h from the project. Enclose the #include from the
1313 library with extern C ...
1314 kes Add print of signal name when a signal is trapped.
1316 Release: 2.1.12 beta
1318 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1320 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1321 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1322 makes SQLit3 run 30 times faster, though a bit less safe.
1323 kes Implement --with-batch-insert in configure and detection of thread
1324 safe libraries. It is on by default, but turned off if no thread
1325 safe library (e.g. SQLite 2) is available.
1327 kes Fix Bacula PostgreSQL buffer overruns.
1328 kes Do better checking for NULL results returned from PostgreSQL;
1329 implement retry for failed queries; clear results buffer after
1330 failed query. Hopefully this will correct the PostgreSQL failures.
1332 kes Implement algorithm to handle only one appendable volume with
1333 Prefer Mounted Volumes = no.
1334 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1335 returned from a query.
1336 kes Make volume lock recursive.
1337 kes Implement an additional volume reservation algorithm that
1338 starts by considering all reserved volumes then uses the
1339 old brute force algorithm of searching the resources to
1340 find a suitable device.
1341 kes Add new reservations debug code and refine the old code.
1342 kes Update the win32/dll/bacula.defs file.
1344 kes Tweak reservations algorithm to permit a few more cases, i.e.
1345 volume reserved, but on different drive, ...
1346 kes Enhance SD status to include Pool and Media Type for drive in a
1347 more readable format (a bit longer).
1348 kes Fix PostgreSQL double free.
1350 kes Minor refactoring of restore decryption code.
1351 kes Add code to smartall.c to detect double free of a buffer.
1353 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1354 so that bsmtp will create a correct email address (mailbox only).
1355 kes Modify 'memory' command so that the buffers are listed as 'In use'
1356 to avoid confusion with Orphaned buffers.
1357 kes I reworked the OpenSSL include/lib flags to be handled in
1358 the standard Bacula way, which should fix bug #863 concerning
1359 non-standard OpenSSL libraries.
1361 kes Implement Help Browser window for bat.
1362 kes Fix reload bug that reset StorageId to zero.
1364 kes Fix TLS #ifdefing when TLS turned off.
1365 kes Ensure that when labelling a tape with Slot=0 that InChanger
1367 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1369 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1370 add DISTINCT (required by PostgreSQL).
1371 kes Implement BSOCK authenticate_director() method. Eventually will
1372 authenicate all daemons.
1373 kes Move several more functions into the BSOCK class.
1375 kes Add code to tell the OS that we no longer need a cached
1376 file that we were reading. In findlib/bfile.c. Also,
1377 only cache files that we are reading. Thanks to
1378 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1379 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1380 kes Implement script to automatically generate cats and dll .def
1381 files for Win32 dll.
1382 kes Update README.mingw32 to include new .def file generation.
1383 kes Correct typo in UTF-8 error message as reported by:
1384 jhernandez <julianhernandez@gmail.com>
1385 kes Add additional sm_check() code on debug level 1.
1386 kes Set default debug level to 1.
1387 kes Trap SIGABRT in attempt to get traceback.
1389 kes Reduce bat connect timeout from 30 to 15 seconds.
1390 kes More restructuring and implementing BSOCK class in place of
1392 kes Remove a few unnecessary malloc() tests in crypto code.
1393 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1394 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1395 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1397 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1399 kes Fix Verify InitCatalog. The attributes were not pointing to the
1400 correct saved location.
1401 kes Implement message callback so that GUI is sure to get all
1402 daemon messages. Currently displayed in a dialog in bat.
1403 kes Ignore SIGUSR2 (Bacula timer) in bat.
1404 kes Apply regress patch from bug #859 to allow regress to work
1405 with Solaris compiler.
1407 kes Begin adding TLS support to bat.
1408 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1409 clean up lex.c and make it more readable.
1411 kes Move more bnet functions into the BSOCK class.
1412 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1413 kes Complete change of berrno strerror() method to bstrerror()
1415 Release: 2.1.10 beta
1417 kes Cleanup incorrect email addresses in bsmtp.
1418 kes Make bat display initial messages rather than discard them.
1420 kes First cut of adding .mod to the run command.
1421 kes Implement auto display of messages in bat.
1422 kes Enhanced preferences to allow all Bacula output to be
1425 kes Try to make bsmtp date routines more generic.
1426 kes Fixed bug #856 autochanger documentation.
1427 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1428 kes Add new cats entry point so Win32 builds.
1430 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1432 kes Do better checking for the MySQL 64 bit libraries looking for both
1433 .a and .so libraries.
1434 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1435 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1436 kes Require the thread safe version of MySQL during configure. Thanks
1437 to Andre Noll for pointing this out.
1438 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1439 continuing in migration code.
1440 kes Apply implementation of tray-monitor font derived from gnome-console
1441 submitted by Andreas Piesk <a.piesk@gmx.net>
1443 kes Eliminate important memory loss in SQLite
1444 kes Fixed the batch insert MySQL thread specific data that was not
1445 being freed. See cats/mysql.c:db_thread_cleanup().
1446 kes Fix restore before command.
1447 kes Convert old hdr.name to name() in a few places.
1448 kes Implement update jobid command.
1449 kes Return all time_t dates in db_get_job_record()
1450 kes Stop watchdog in SD earlier.
1451 kes Put Pool just after Storage in please mount message.
1452 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1455 kes Update the po files.
1456 kes Fix Verify InitCatalog by making it cache attributes.
1458 kes Change name bacula-bat to bat for man 1 page to correspond to
1460 kes Check for client and store NULL pointers in status command. This
1462 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1463 kes Fix sign extended editing of %p.
1464 kes Clean out a little old #ifdefing in cats/mysql.c
1466 kes If time diff between DIR and FD is more than 600 seconds convert
1467 INFO message to WARNING.
1468 kes Implement heap size display in status for all daemons.
1469 kes Attempt to fix MySQL db open memory loss (not successfull).
1470 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1471 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1472 Query. This looks like a MySQL but but by doing extra releases,
1473 the memory goes away. This should fix bug #847.
1475 kes When backup fails, cancel SD before waiting for sd termination.
1476 kes If SD is waiting for FD to connect during cancel, wake up the
1478 kes Fix fsf code so that errno is correctly reported.
1479 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1481 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1482 so that Bacula doesn't later stumble into a seg fault.
1483 kes Use the term Restore Client in the restore Job report.
1484 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1485 the original job's FileSetId.
1486 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1487 spooling in migration jobs. Not yet tested.
1488 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1489 reading conf file from a pipe. However, do it with open_bpipe()
1490 rather than popen. Not yet tested.
1492 kes Fix an ugly bug where the VolCatBytes were getting updated
1494 kes Implement bconsole memory command that prints current memory
1495 usage, plus smartalloc dump.
1496 kes Clarify some error messages in backup, admin, and migrate.
1497 kes Shrink label dialog to smaller size.
1498 kes Invert Cancel OK buttons on restore to be OK Cancel.
1499 kes More strerror() to bstrerror() conversions.
1501 kes Start implementing bstrerror() in place of strerror().
1502 kes Stripping path -- seems to work.
1504 kes Prevent door and port files from being restored (mostly
1506 kes Free an unreleased buffer in compat code.
1507 kes Change console Job name from *Console* to -Console- to eliminate
1508 Win32 filename problems. Put Win32 path separator when creating
1509 Console file. This fixes bug #846.
1510 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1512 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1514 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1515 to force Win32 error message.
1517 kes First cut strip path. The data should be passed to the FD,
1518 but nothing is done with it yet.
1519 kes Enhance the digest and signature routines in the crypto
1520 library to accept a JCR and to use it to print error messages
1521 so that they will go in the Job report rather than the daemon's
1523 kes Simplify some of the verify signature code.
1524 kes Simplify a few of the alternative returns in the signature
1527 ebl Use only POSIX regex instead of GNU regex in breg.c for
1528 File relocation. It fix broken freebsd compilation.
1529 kes Convert all other Dir files to use new ua class message
1531 kes Tentative fix for missing digest signature in bug 807.
1532 kes Correct handle problem in new win32_ftruncate routine.
1533 kes Convert ua_purge.c and ua_update.c to use new ua class
1534 message routines for bat.
1536 kes Correct incorrect installation of LICENSE in Win32 installer.
1537 kes Display LICENSE at the beginning of the Win32 install.
1538 kes Attempt to correct the need for the png files to be installed
1540 kes Reapply my bat.conf install script in qt-console. I think I
1541 editted bat.pro instead of bat.pro.in and it was lost.
1542 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1543 the /var/lock/subsys for subsysdir. Also corrects typos in the
1546 kes First cut update job.
1547 kes Correct configure to include qmake of src/qt-console directory.
1549 kes Make restore job yes/mod/no print in one command so GUI works.
1550 kes First cut implementing backup and restore client.
1551 kes Correct editing in Verify output that caused a seg fault.
1553 kes Insure that bat.conf is not overwritten during installation.
1554 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1555 while I was implementing migration in March 2006 !
1557 ebl Cleanup file relocation, using char *RegexWhere instead of
1558 char *where + bool where_use_regexp
1559 kes Update some manpages and add bat manpage.
1560 kes Make a first cut at converting bacula.spec.in for bwx-console
1562 kes Apply patch from John Goerzen to add hostname as fourth argument
1563 to make_catalog_backup script.
1564 kes Fix typos I introduced into bsmtp.c
1565 kes Make pm_strxxx() routines handle input of NULL pointer. This
1566 is to protect from NULL pointers returned from SQL databases.
1567 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1568 kes Add more debug to FIFO code -- fix fifo regression test.
1570 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1571 kes Add thread timer to bnet_connect() to break from OS if wait time
1574 kes Update Win32 build to include new files, new symbols, and
1576 kes Implement socket level heartbeat (tcp_keepidle)
1577 ebl Commit File relocation patch
1578 kes Make bat have 'make install' target.
1579 kes Warn during install if old gnome-console binary found.
1580 kes Warn during install if old wx-console binary found.
1581 kes Add -8 option to bsmtp command line to add content type utf-8.
1582 Fixes bug #809. (Character coding problem in bsmtp).
1583 kes If < is found in target (from, to, cc) then do not enclose the
1584 target in < > in bsmtp. Fixes bug #772 (malformed address).
1585 kes When printing certain items in dbcheck, stop after 300000.
1586 Fixes bug #822. (dbcheck loops).
1587 kes Incorrect status in Dir after waiting for mount with poll set.
1590 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1592 kes Print waiting to reserve a device every 5 mins.
1594 kes Don't call close_part in label.c if tape and relabel.
1595 kes Don't free volume if busy in close() -- should help with
1597 ebl Fix #824 RunScript bug (After script could be execute twice)
1598 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1599 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1600 Add a regression script to test RunScript
1602 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1605 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1606 deprecated. No additional bugs will be fixed, and they will be dropped
1607 in a future release (probably 2.4.0).
1608 kes Change name of wx-console to bwx-console to make it more Bacula
1610 kes Change the name of gnome-console to bgnome-console to make it
1613 kes Some time in March, a Feature Request with patch from Jorj Bauer
1614 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1616 The ability for the director to validate a Client (FD) CN against
1617 an arbitrary set of patterns rather than the hostname, with
1618 A new 'TLS Allowed CN' set of directives which are implemented
1619 in the Client resource. Then pattern matching is used in place
1620 of hostname matching against the Certificate's CN. As an example, we
1621 have certificates which (a) use a local CA, and (b) have a CN of the
1623 kes Add new/changed entry points to Win32 build
1624 kes Create unaccepted-projects for projects that are not accepted.
1625 kes Simplify locking in the reservations system.
1626 kes Add more debug code in reservations.
1627 kes Make sure error condition on reserving a volume is handled correctly.
1628 kes Correct handling of volume_in_use.
1629 kes Correct handling of initializing a device.
1630 kes Move handling of broadcasting releasing a device into release_device().
1631 kes Correct attaching dcr to dev so that it is only done if device
1632 is properly initiated.
1634 kes Locking debug level tweaks in SD.
1635 kes Tweak new Volume code.
1637 kes Add exec external-command [wait-seconds] to bconsole. This
1638 executes the external-command. Note! normally external-command
1639 should be enclosed in double quotes.
1640 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1641 it should normally be off in a production system.
1643 kes Implement die command for SD so that we can force it to dump.
1644 kes Implement SD lock debug code.
1645 kes Implement new algorithm for keeping Volume list in SD. It
1646 is now owned by the device.
1648 kes Implement new code for freeing in use volumes that should
1649 resolve if not all, some of the problems of multiple drive
1650 tape conflicts described in bug 801.
1652 kes Fix gui/bacula-web/images files in svn.
1653 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1655 ebl Fix a bug in batch mode (in string escape)
1656 kes Correct migration prune SQL typo that crept in in a
1657 recent 2.1.x change.
1659 kes Move bnet_despool() into class in bsock.c
1660 kes Modify job report to include director name and Build OS.
1661 kes Move drop root privilege and check_catalog() before fork.
1662 kes Add update database scripts (version 9 to 10) to updatedb directory.
1664 ebl Check size and age of each file after its backup to see if
1665 it has changed during backup, if 'checkfilechanges' is set.
1666 The FD will do an extra check (stat(2)) after
1667 each file backup. mtime, ctime and size are compared with
1668 'before backup' information. If time or size mismatch, an
1669 error message will be generated. You must upgrade FD to use it.
1671 kes Make database name and user configurable
1672 --with-db-name=xxx --with-db-user=xxx
1673 kes Add back database type to message.c for debugging.
1675 kes Implement dir_sql() which issues an SQL query.
1676 kes Modify bat medialist to use dir_sql() and do some minor C++
1677 formatting as well as eliminating a number of pointers, simplifing
1680 kes Fix some of the mtx-changer grep commands for tape label readers.
1681 kes Convert a number of bsendmsg into the appropriate send/warning/error
1682 message class calls.
1683 kes Suppress the using database message in the .sql command.
1684 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1686 kes Add context menu for floating a window.
1687 kes Some minor cleanup and name changes in qt-console
1688 kes Add doing mt setblk 0 in Win32 mtx-changer.
1689 kes Apply Martin's bug fix to move definition of ENODATA for
1691 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1692 sqlite2 and sqlite3.
1694 kes More pruning cleanup.
1695 kes Turn on wait_for_drive by default in mtx-changer.
1696 kes Turn on Batch insert code by default as it now passes regression.
1697 kes Add ./configure --enable-bat to enable building of Bat.
1698 No install yet though.
1700 kes Implement a new .sql command for bat.
1701 kes Implement code to turn off pruning in obtaining the next volume.
1702 Pruning is turned off for the status dir command, but turned on
1703 for SD requests and for the list nextvolume command.
1705 kes Correct Qmsg() that was not updated correctly when committing a
1706 previous change (probably the recent TLS patch).
1708 kes Write new subroutine is_volume_purged() that explicitly checks
1709 if the Volume is purged, and if so marks it as such. This should
1710 resolve problems reported about needing to mount twice to recycle
1712 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1713 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1714 amount of duplicated code.
1715 kes Do volume pruning only for the Media Type desired (reduces pruning time
1716 if multiple Media Types are in the same pool).
1717 kes Implement more detailed info in the Job report for the Bacula version
1719 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1721 ebl Add bbatch tool to bench database and insert mode.
1722 Fix sql quote stuff in batch mode
1723 Fix sql stuff for mysql
1725 kes Correct problems with am/pm scheduling. Fixes bug #808.
1726 kes Implement new prunning code that prunes up to 1000 jobs at
1727 the same time. The same technique can be applied to a number
1728 of other prune/purge subroutines.
1729 kes Add an insanity check when starting a new tape job to ensure
1730 that the tape position has not been changed. If so fail the
1732 kes Fix Win32 build for dlls to add the folllowing:
1733 src/lib/bsock.c -- new file with new entry points
1734 src/lib/dlist.c -- new entry points
1735 src/cats/sql_create.c -- new entry point
1736 src/cats/sql_cmds.c -- new DATA item exported
1738 ebl batch mode cleanup bscan-test is ok now.
1739 kes Implement SD code to check length of disk volume before appending.
1741 kes Correct return status on db_batch... routines.
1742 kes Add call to db_write_batch_file_records() to migration code.
1743 ebl Fix AfterJob timing
1744 kes Move the checking of the database in initializion of the Director
1745 to after we drop privileges. This avoids the need for both root
1746 and bacula access to the DB.
1747 kes Correct a misplaced variable definition in src/filed/backup.c
1748 kes Correct how the new batch insert db_create_attributes_record()
1749 uses the arguments. Caused a seg fault in bscan.
1750 kes Implement lock() and unlock() methods in DEVICE class.
1751 Implement block() and set_block(xx) methods in DEVICE class.
1752 kes Modify bnet_connect() so that it uses time() to check for the
1753 wait time expiring (on some OSes, some system calls may not
1754 return immediately).
1755 kes Modify Verify to obtain the previous JobId when it is actually
1756 running rather than at schedule time (as it was in 1.38.x).
1757 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1759 kes When checking pid in pid file, continue running if the pid is
1760 the same as ours. This occurs on IRIX after a system crash.
1763 kes Extend new GUI API.
1764 kes Make the ua structure a class, and implement send_msg(),
1765 error_msg(), warning_msg(), and info_msg().
1767 kes Apply fix from for building wx-console on the Mac from
1769 kes Implement new select mechanism for GUI programs.
1770 kes Reorganize initialization of stackedWidgets in bat.
1772 kes Add updated nagios plugin supplied by Christian Masopust.
1774 kes More bat implementation.
1775 kes File migrate bug with Pool Occupancy using mediaid instead
1776 of jobids. Fixes bug #795.
1777 kes Fix orphaned buffers in filed backup and verify due to
1778 crypto buffers not freed during errors. Fixes bug #789.
1779 kes Extend new GUI api code to tree commands.
1780 kes Ensure that tree and dot commands check console ACLs.
1781 kes Permit marking directory with trailing slash.
1782 kes Allow 20 console connections (instead of only 10).
1784 kes Add smartctl call to bacula-sd.conf as an example of getting
1787 kes Modify jobq.c to let simultaneous restore jobs run. This may
1788 cause them to fail if they cannot get a drive.
1789 kes Add Client Connect Wait to Storage daemon to permit users to
1790 modify the time the SD waits for a FD connection.
1792 kes Correct virtual changer check which was backwards. This caused
1793 volumes to be unloaded into slots already occupied.
1795 kes Apply Command ACL filter to JobId list in restore command.
1796 kes Correct typeo in var.c patch.
1798 kes Don't let Bacula prune File or Job records for the current Job.
1799 kes Fix variable substitution pad + inc bug reported (with patch)
1802 kes Correct SQLite log table index as reported by Luca Berra.
1804 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1806 kes Begin implementing new comm signals for API.
1807 kes Fix a few places in lib/message.c where the open fd may
1809 kes Continue implementing lib/bsock.c (real class). Make jcr,
1810 who, host, and port private. There are new methods to access
1811 them for non-class use. This required touching a number of files.
1813 kes Add LANG=C to autoconf/randpass so it works with languages other
1814 than English. Fixes bug #788.
1816 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1818 You will not be able to generate Include/Exclude list any more.
1819 It will be fixed soon.
1820 If you want to use this, you can apply
1821 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1823 kes Restore of sockets created false error messages because Bacula
1824 no longer restores sockets, but the code was still trying to
1825 set the attributes on a non-existent file. Reported by a user.
1826 ebl finish RecyclePool feature
1827 Media will takes Pool.RecyclePool
1828 when moving from Scratch to a Pool or when user will do
1829 update volume=xxx frompool
1830 To use it, add RecyclePool = aPool to your Pool resource
1833 RecyclePool = Scratch
1837 kes Expand new BSOCK class adding signal() and new BNET signals.
1838 kes Begin enhancing the dot commands adding a new API function
1839 that returns more information and will make it easier
1840 to interface to the Director from a program.
1842 kes Make DEVICE fd private. Its new name is m_fd, and can be
1843 obtained with dev->fd() outside the class. This is the
1844 first of many DEVICE members to be made private.
1845 kes Implement Michael Renner's idea on having a virtual disk
1846 changer. I made some minor modifications (e.g. I did not
1847 implement the Virtual Changer directive, but simply set
1848 the Changer Command to an empty string.
1850 kes Implement a BSOCK send() method that writes the whole record
1851 in a single write() request rather than in two.
1852 ebl add update volume=xxx recyclepool=yyyy
1853 volume takes recyclepool from pool when using update volume=xxx from pool
1855 kes Fix encryption deblocking bug, which caused some restored files
1856 to be truncated. This fixes bug #763.
1857 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1858 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1860 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1861 ebl Use btime_t instead of uint64_t in media patch.
1863 kes Optimize the use of the database a bit in the Status dir command.
1864 Only open it when needed, ensure that if any previous database
1865 was opened, it is closed.
1867 kes Correct VolCatBytes bug from media patch.
1868 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1869 in the case of orphaned records.
1870 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1871 and File records in 300K chunks to be more efficient. This
1872 idea came from Juan Luis Frances (if I remember right).
1873 kes Apply Eric's scratch patch that moves a purged Volume to
1874 the RecyclePool. Question: how is RecyclePool set? what
1875 happens to the ScratchPool?
1876 kes Apply Eric's media patch that collects read/write media
1877 times as well as byte counts. This patch requires a
1878 simultaneous upgrade of the DIR and SD. Note, there
1879 should be some way to turn off timing. I'm not sure
1880 times are in Bacula units.
1881 kes Apply Eric's batch-insert patch.
1883 kes Update projects list.
1885 kes Implement Include/Exclude file lists in FD as dlists using
1886 the new dlistString class. This permits efficiently having
1887 large include/exclude lists and completes project Item 25.
1888 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1889 console is authorized to cancel the job. This fixes bug
1891 kes Modify SD so that the VolCatJobs medium record is updated
1892 at the beginning of a Job rather than the end. This
1893 fixes bug #775 where exceeding MaxVolJobs caused jobs
1895 kes Added a mutex around getting and setting Volume information
1896 so that multiple simultaneous jobs will single thread.
1898 Switch to using Subversion
1899 kes Remove src/pygtk-console/ from configure
1901 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1902 plus the entrypoints.
1903 kes Apply patch supplied that corrects debug print
1904 in canceling jobs for max run time. Supplied as
1905 part of bug #621, which was previously fixed.
1907 kes Test on job_canceled() and sd_msg_thread_done inside
1908 loop starting the message thread to avoid a race condition.
1910 kes Remove rl_catch_signal from console.c as it conflicted
1911 with the header definition. Fixes bug #765.
1912 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1914 kes Clarify some stored/acquire messages to indicate if the
1915 problem is with read or append.
1917 kes Fix memory leak with storage ids in cats/sql_get.c
1918 kes Terminate watchdog earlier to avoid reference to released
1919 memory -- reported by Jason Austin.
1920 kes Move closing the database from jobq.c to the director daemon
1921 termination routine. This fixes memory leaks for shadow jobs
1922 (i.e. migration jobs).
1923 kes Free up the unique jobid chain items in migrate.c. This fixes
1924 a memory leak problem.
1925 kes Convert some ugly looking for statements to use foreach_alist
1926 in findlib/find.c. This will facilitate converting the structures
1927 to use dlist (for large include/exclude lists).
1928 kes Fix a bug in the btree.c and btree.h routines, then rename them
1929 rblist and add them to be built in src/lib. Include some new
1930 methods written by Rudolf Cejka that make the code more readable
1931 (hides some of the ugly casting).
1932 kes Add set_next() and set_prev() methods which make the code much more
1933 readable. Also add a new dlistString class that facilitates storing
1934 strings in dlists. To be used in the large include/exclude lists.
1935 kes Make some trivial modifications to lib/tree.h that use rblist
1936 rather than dlist for storing the tree links. This was suggested
1937 by Rudolf Cejka. The result of this is that the restore tree now
1938 uses red-black binary trees rather than simple linked lists. This
1939 should give rather dramatic speed improvements for directories
1940 contining large numbers of directories/files (more than 10000).
1942 kes Fix maxruntime bug #621.
1944 ebl Implement the include JobID in spool file name project.
1945 kes Reorder projects file in order determined by Jan 2007 vote.
1946 kes Implement item #12 on project list -- quick release of FD by
1948 kes Fix open of SQLite3 db where user does not have write permission
1949 so that DIR does not crash. Fixes bug #761.
1951 kes Add back missing @ in Win32 Makefile.
1952 kes Change 'Device not configured to autolabel' from INFO
1954 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1955 which should restart an indefinite # of times.
1956 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1957 other DIR specifications.
1959 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1960 Fix path quoting in SQLite scripts.
1961 Fix problems with SHGetFolderPath.
1963 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1965 kes Fix Job restart on error bug that promotes an Inc to a Full
1966 backup. This should fix bug #755.
1967 kes Add qt-console and first cut of code.
1971 kes Fix Bacula->Documentation link on Win32 to point to index.html
1972 instead of bacula.html. Fixed bug #750.
1973 kes Return JobId in db_get_job_record() when JobId==0. This should
1975 kes Do not release source pointers when restarting a failed job.
1977 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1978 This *should* fix bug #747.
1979 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1982 kes Modify USTORE constructor to set an empty store_source string,
1983 and don't copy the store_source string in a cancel. Hopefully
1984 this will fix Arno's seg fault, bug #744.
1985 kes Add back code to disable conio in configure. Fixes bug #743.
1986 kes Correct the Options scanner in the FD to correctly handle
1987 SHA1 option, which was eating the next option. Reported by
1989 kes Add code to indicate when the SD is spooling, spool wait, and
1990 despooling as requested by Alan Brown.
1992 Version 2.0.0 released: 4 January 2007