1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
34 kes Make SD aware of Virtual Backup jobs.
35 kes Add VirtualFull for bat.
36 kes Changes to get read storage correct for Virtual Backup.
38 kes Remove old code from label.c
39 kes Split display_display_info() out of write_bsr_file()
40 kes do_vbackup_init() working -- i.e. bootstrap file built.
41 kes Change Bacula trademark owner from John Walker to Kern Sibbald
42 kes First non-working cut of vbackup
43 kes Correct FD heartbeat code to use volatile variable accessed by
45 kes Zero thread id with memset if on Win32 in case it is a struct.
46 kes If cannot create JobMedia record, continue to try to write eof
47 and clean up in block.c
49 kes Add code to interface OpenSSL to new Win32 pthreads code which
50 used a structure for thread_t.
52 ebl tweak bat for win32 compilation
54 ebl Remove tokyo cabinet from the source
55 ebl Update configure/autoconf to support berkeley DB
56 ebl Add a sort to db_get_file_list() to improve bsr construction time.
58 kes Add a mtx-changer.conf file that is not overwritten during
59 an upgrade. It fully configures the mtx-changer script.
60 kes Clear in-use bit on vol when unused while swapping.
62 kes Remove sleep at end of ./bacula
63 kes Clear hash packet for hardlinked files correctly. This corrects
64 a long standing bug where hardlinked files selected individually
65 would occasionally not be restored.
67 kes Apply Eric's patch to ensure that autoprune does not return
68 a Volume not in the autochanger unless requested to do so.
69 kes Correct bat restore display of multiple drives. This fixes
71 kes Do find_a_volume() each time an unload is done. This
72 fixes the failure of maxvol2-test.
74 kes Add some SD debug code.
75 kes Do find_a_volume() each time an unload is done.
76 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
77 and adds --with-db-port to ./configure.
78 kes Use Qmsg() in job.c watchdog callback.
80 kes Release main control rwlock if ABORTing.
81 kes Make watchdog connect timeout queue messages rather than sending
82 directly to avoid lock conflicts with the real thread.
83 kes Add const char in dbd.c to avoid compiler warnings.
84 kes Fix python compiler string warning. Note, IMO the GNU C++
85 compiler guys have made a *very* bad change to their compiler.
86 They now force all strings to be 'const' unless you explicitly
87 cast them, which is extremely ugly and ruins nice code as well
88 as creates a lot of useless work.
90 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
91 mt. This fixes bug #1116.
92 kes Add const in python files to reduce compiler warnings.
93 This may have to be backed out because of later compiler
95 kes Fix failure of 2drive-concurrent-test. Always read label;
96 clear_unload() only after drive is defined in acquire_for_read().
98 kes Generally clean up the manual tape loading code. The main
99 conceptual change is that when a volume is marked to be unloaded,
100 its volume name is retained, and it is only marked as unloaded
101 when either the autoloader says it is unloaded or another tape
102 is read on that drive.
104 kes Add debug code and refactor subroutine in stored/mount.c
105 kes Fix format problem in bscan output reported in bug #1105.
106 ebl Fix get_next_volume_for_append logic with autochanger
107 - use pruned volumes if found
108 - don't reset the inchanger flag after getting a recycled volume
110 Fix recycle_oldest_purged_volume to take InChanger flag in account
112 ebl Add mmap/unmmap implementation for tokyodbm under win32
114 kes Make first step toward eliminating globals from config
115 scanning. Also should be a workaround for FORTIFY_SOURCE
116 GNU C bug -- fixes bug #1042.
118 kes Apply duplicate job tests to restarted jobs.
119 kes Copy more data when restarting a job so that run
120 overrides are kept. This should fix bug #1094.
122 kes More word alignment cleanup.
123 kes Fix bug where SD did not ask operator if the device could not
124 be opened. Reported by Eric.
126 kes Add dbuser to DIR conf file (replaces user).
127 kes Add --with-db-password to ./configure
128 kes Fix regress to handle db_password.
129 ebl Add new "status storage slots" that list autochanger
131 ebl Update vtape driver to compile only under Linux.
132 ebl Fix a bug when restoring with a wrong mediatype.
134 kes Eliminate ints from conf files and structures to avoid
135 word alignment problems
137 kes Fix bug reported by Scott Barninger where the bacula script
138 refers to scripts in the wrong directory. Needed to meet the
139 requirements of recent FHS location changes.
140 ebl Disable vtape for FreeBSD.
142 ebl Modify disk-changer to check if slot contains something before
145 ebl Fix vtape on win32 and debian.
146 ebl Fix autoselect patch (cause segfault).
148 ebl Fix autoselect option broken for a while. Fix #1089. Need some
149 work with StorageId to be able to use a particular drive in a
152 ebl Rename vtape to vtape.
153 ebl Update vtape driver.
155 ebl Modify vtape driver to avoid sparse file.
156 kes Add make clean of qt-source directory during ./configure
157 kes Store last block number written to tape in DEVICE and
158 use it for testing for correct last block on EOT.
160 Release Version 2.4.0:
164 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
165 This fixes bug #1095.
167 kes Add create_postgresql_database.sql to Win32 installer. Should
168 fix problem reported by Juilio Monteiro.
169 kes Get correct slot when auto unloading a device. This fixes bug
172 kes Fix multiple media restore.
173 kes Make DEVICE Slot private and access it via a method.
174 Allows better control over when it is set and cleared.
175 kes Fix possible seg fault if SQL error.
177 kes Add Martin's fixes to argument scanning for the estimate
178 command. This fixes bug #1093.
179 kes Add debug code to SD.
180 kes Fix renaming a Volume, which used the wrong Volume name.
182 kes If operator has rewind tape, print warning, release tape and
183 try once more. If tape is positioned somewhere, something went
184 wrong, so mark the tape in error and try once more. Previously
185 this error was fatal, now it produces an error message.
186 kes Ensure correct volume name displayed during restore
187 kes Ensure that Volume is mounted for restore.
189 kes Fix a few more Coverity reported problems.
191 kes Apply Allan Black's status dir job count patch.
192 ebl Add information about IMPORT/EXPORT slots in mtx-script.
193 kes Enhance a couple of SD debug messages.
194 kes Tweak unload flag setting and ensure it is set during swap.
196 ebl Fix #1091 about bad output in estimate command.
198 kes Modify autochanger locking to attempt to avoid race
200 kes Make sure device not busy before doing label command.
201 kes Display open() errors except when polling. Previously too
202 many were suppressed. This should fix bug #1070.
203 kes Fix Win32 reparse points. Bacula will not recurse into any
204 reparse point directory, including mount points, unless the
205 directory is explicitly mentioned at the top level (same as
206 with Unix). A file that is linked to another file will be
207 backed up -- much as Unix does for hardlinked files.
208 This fixes bug #1041.
210 kes Remove double quotes from ChangeLog and ReleaseNotes
211 kes Remove StorageId test when pruning and recycling (Eric's changes).
212 kes Remove old form of locking when getting volumes -- causes deadlock.
213 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
214 the name unique and to eliminate compile time error.
215 kes Add accurate.o to Win32 FD Makefile
217 kes Fix cats dll build on Win32 after db_update_job_end_record
218 calling sequence change.
219 ebl Switch to tokyo dbm instead of htable in accurate code
220 ebl Include tokyo dbm to bacula source tree
222 kes Fix buffer overruns detected by Coverity.
224 kes Tweak joblog display.
226 kes Implement --without-qwt
227 kes Fix layout of restore tree dialog
228 kes Add configure bat QWT libraries, so that bat can be built
229 with or without the QWT libaries.
231 ebl Add dummy tape driver for regression tests.
232 kes Make sure we unload the right slot when swapping.
234 kes Add debug times, reduce size of two-pool-changer test
236 ebl Tweak autoconf scripts for vtape
238 kes Improve SD reserve debug code.
239 kes Testing an improvement to free up volumes no longer in use.
241 kes Rework SD acquire for read to handle autochanger Volume
243 kes Implement regression that explicitly tests swapping a Volume
244 from one drive to another.
245 kes Enhance disk-changer to detect most error conditions.
246 kes Fix SD code so that it properly swaps a Volume between drives.
247 This fixes bug #1083.
249 kes Apply libdbi patch from Joao Freitas for regress and for
250 Bacula trunk. Regress now works with libdbi. Nice.
251 kes Apply .nobackup patch from bug #1077 submitted by
253 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
254 name into jobs cloned via the run directive.
256 kes Prevent a Volume that is being swapped from being freed from
257 the volume list. This will most likely fix, at least partially,
259 kes Fix strippath so that it does not get a buffer overrun and crash FD.
260 This fixes bug #1078.
261 kes Remove 50 millisec wait in SD that broke debugger.
262 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
263 that a job may run, counted from when the job was scheduled.
264 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
265 a job may block waiting for a resource, counted from when the job starts
266 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
267 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
268 that implements multiple commands per line in the console when using
269 readline. Modify the default to use a semicolon as the command separator.
271 ebl Fix SQL query in migration code.
272 ebl Make accurate mode with hash disk pass regression tests
274 ebl Implement first cut of accurate backup with hash disk.
276 kes Force unload of volume when wrong volume mounted in SD.
278 kes Fix bat seg fault at termination.
279 kes Add Bacula generated version to bat about box.
282 kes Experiment with allowing multiple read jobs.
283 kes Move final volume swapping code to DCR method and
284 call it from acquire_for_read().
285 kes When wrong volume is mounted during read, unload_autochanger.
287 kes Integrate the libdbi changes from Joao Henrique Freitas
289 kes Stop searching for Volumes in SD askdir if DIR returns the
290 same volume name twice in a row.
291 kes Close bat console windows first to eliminate error message
294 kes Tweak the swap Volume from one drive to another code so that
295 it now seems to work.
296 kes Resolve several problems with recycling that broke the new
297 code (these problems are in 2.2.9 as well).
298 kes Remove the volume lock when calling the sysop code.
299 kes Don't mark a reserved volume with no writers as unused otherwise
302 kes Rework class structures for VOLRES, DCR, and DEVICE to make
303 the method names a bit more logical, and for more logically
304 handling the responsibilities.
306 kes Remove redundant code in terminating the scheduler that just
307 causes a seg fault in many cases.
308 kes Cleanup releasing a volume and make it a DCR method.
309 kes Improve algorithm for detecting pre-reserved volume and
312 kes Tweak volume swapping code so it works.
313 kes Correct name overloading in mount.c
314 kes Replace released flag in VOLRES with reserved and add access
315 methods for the VOLRES class.
316 kes Prevent volume from being released while being swapped.
317 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
319 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
321 kes Refactor parts of stored/mount.c
323 ebl Add sanity checks for VolWriteTime and VolReadTime
324 ebl Take care of bad clock changes while computing VolWriteTime
325 and VolReadTime. This should fix or limit #1066
326 kes Correct error string numbers in dird/catreq.c
327 kes Restructure reserving, acquiring, and mounting volumes. Calls to
328 autochanger are deferred for mount.c -- simplifes the code.
330 kes Do not prune any running job. It just fails the job.
331 kes Lock the volumes when changing dev->reserved_device and marking
332 the volume unused otherwise the device can get reserved by
333 another job before the volume is released, thus blocking it.
335 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
336 kes Fix bug #1063, reuse of freed ptr in list nextvol.
337 kes Release regex compile buffer in filed/job.c
338 kes Add proper type of const char in sql_create.c
339 kes Turn off debug in daemon termination routines
340 kes Move free_volume_list() before devices are freed in stored.c
341 kes Fix reference to uninitalized stack variables in bregex.c.
342 This should correct bug #1067.
344 kes Fix possible seg fault in SD when freeing a volume entry.
346 kes Implement unload_dev() before swap device.
347 ebl Add statistics prunning with option and menu
348 kes Separate unload_dev() from unload_other_device() in autochanger.c
350 kes Apply patch from bug #1069 that corrects spurious error messages
351 when ACLs enabled on SGI but no ACL exists.
352 ebl Fix small segfault in bacula-sd when debug level is 500
353 kes Modify run_program() and run_program_full_output() to use
354 call by reference for the results string. This corrects a long
355 standing problem where the address of the string may be changed
356 in the subroutine but not in the calling program.
358 kes Re-enable code to remember last volume mounted on a non-tape
360 kes Add patch supplied in bug #1068 that fixes a SD crash when using
361 a Virtual autochanger.
362 kes Generate correct JobMedia records during spooling/despooling when
363 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
364 <tih@hamartun.priv.no> for excellent analysis and testing.
366 kes Tweak hash algorithm for htable using Martin Simmons idea
367 for doing a circular shift.
368 kes Remember what volume is in VTLs (previously turned off for
370 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
371 pointed out some problems in creating JobMedia records during
372 spooling with concurrent jobs. Fix the problem by updating the
373 start file position before despooling and generate a jobmedia
374 record at the end of despooling.
376 kes Fix handling of JobMedia records during spooling and when a
377 Volume is changed without actually writing data to the Volume.
379 kes Rework certain SD locking based on gdb tracebacks of deadlocks
380 sent by Eric. This code now uses only the volume_lock() rather
381 than the reservations lock when at EOM and acquiring a new
383 kes Ensure only one exit point in several subroutines.
385 kes Implement bsock code to permit locking. Use the new code in Verify
386 in the FD to prevent the heartbeat thread from disrupting the Verify
387 data sent to the Dir.
388 kes Modify SD locking to eliminate locking the reservations system from
389 outside the system. Use the volume lock when getting media data
390 and reserving a new volume at end of media.
391 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
392 when SD starts are not locked into place.
394 kes Fix error compiling runscript code on 64 bit machines.
395 kes Tweak Win32 mount point code.
396 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
397 cleared giving bad file estimate).
398 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
401 kes Keep Schedule run lists in order as suggested by
404 kes Implement autostart scripts for Debian.
405 ebl Implement upgrade catalog scripts.
407 ebl Apply jobstat patch for long term statistics. Have to implement
408 purge stats command and upgrade scripts.
409 kes Fix mtx-changer.in for broken Debian mt program.
411 kes Fix large number of JobMedia records reported by Eric Bollengier.
413 kes Apply doc fix from bug #1062.
414 kes Resolve crash and improper restore wx-console Win32 restore
415 GUI. Fixes bug #1065.
416 kes Update Win32 wxWidgets to latest version.
417 kes Attempt to do correct handling of Win32 mount points. Should
419 kes Fix Win32 FD backup/restore memory leak due to improper termination
420 of BackupRead/Write. This fixes bug# 1038.
422 ebl Reduce memory usage for accurate backup, working only with ctime
423 and mtime. (not all Lstat field)
424 About 40MB for my Linux system (400.000 files)
426 kes Add dcr->reserved_volume flag that allows us to release a volume
427 even if it is not vol->released. This allows maxvol2 to work when
428 Volumes expire and we are already writing to the device (i.e. a
429 volume is pulled out from under us by another job terminating after
430 we reserve the drive).
432 ebl Permit multiple command/console per runscript definition.
433 RunScript { command = /bin/true ; command = /bin/false ... }
434 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
435 (restart an application) just after the VSS snapshot on windows.
436 kes Don't zap dcr values during release_volume() as they might
437 have the next Volume to be mounted.
438 kes Fix AIX prototype.
440 kes Second cut of drive switching during backup.
443 kes Update Win32 version of wxWidgets to most recent version.
444 kes Tweak Copy job details.
445 kes Rework dir_find_next_appendable_volume to make a bit more effort
446 to find a suitable volume before giving up.
448 kes Make ask_sysop_to_create... to return if waken from wait.
449 This helps get out of blocked conditions.
450 kes Experimental implementation of switch_device in reservations.
451 kes Implement FD version to allow easier protocol changes.
452 kes Add Plugin Options string -- not yet passed to FD.
453 kes Implement PluginOptions ACL.
455 kes Attempt to correct problems with restores with autochangers and
456 use counts going negative
457 kes Rework SD status command and implement API for bat. Implements
458 header, runing waitreservation, devices, volumes, spooling,
459 and terminated status keywords.
460 .status storage=xxx <keyword>
461 kes Clarify TLS error message by adding double quotes around name.
462 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
463 kes Pass jcr to tls routines so debug messages can be handled better.
464 kes Rework jobq resource allocation code, and possibly fix a bug
465 that caused reference counts to get out of sync.
467 kes Rename fd/dir plugin to use Bacula standard underscore.
468 kes Plugin work -- bring dir up to fd level.
469 kes Start implementation of VTL code
470 kes Fix Win32 build after adding new cats subroutine.
472 kes First cut at Duplicate Job implementation.
474 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
475 kes Start PluginOptions string, and refactor a bit of ua_run.c
476 ebl Apply Allan patch that permit to reset recyclepool.
478 kes Test patch -- possible fix or improvement for bug #1053
479 kes Refactor FD and SD status commands to permit new API code in
480 SD, and to fix Win32 build.
481 kes Win32 build is now working.
483 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
484 some ideas in patch from Scott Bailey.
485 kes Begin implementation of duplicate Job control.
486 kes Fix some of Win32 build after recent additions.
487 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
488 which causes the FD to detect whether or not the OS has the
489 honor no dump bit (*BSD systems), and if so, to skip backing up
490 any file with this bit set. The feature is enabled by setting
491 'honor no dump flag = yes' in the Options section of a FileSet.
493 kes Correct po warning message with datarootdir
494 kes Implement more code in dird.c to put configuration parsing in
495 a class rather than use globals.
496 kes Restructure SD status command for implementation of bat API
499 kes Suppress incorrect 'Will not descend from x into y' messages.
500 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
501 daemon globals used by parser.
502 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
504 kes Fix free of plugin_list when none exists.
506 ebl Apply accurate project patch.
508 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
509 on non-mempool object)
510 kes First cut of converting FD .status to work with bat API.
512 .status client=XXX header
513 .status client=XXX running
514 .status client=XXX terminated
515 kes Implement first cut of Copy Job.
516 kes Implement Catalog in Pool resource. It overrides catalog specified
517 in the Client resource.
519 kes Apply patch (with some difficulties) from Joao Henrique Freitas
520 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
522 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
523 ftruncate() actually works. In the case of some (cheap) NAS devices,
524 it does not, and so recycling NAS Volumes does not work. The code
525 simply unlink()s the file, then recreates it. This fixes bug #1011.
527 kes First incomplete cut of big malloc blocks for htable.
528 kes Tweak plugin code.
530 kes Plugin debug code + tweak a couple bat dialog layouts
532 kes Fix creating first JobMedia record during Migration to include
533 proper index. This caused slow restores of migrated jobs.
534 kes Temp fix to plugin name file_index.
535 kes Bacula backed up and restored a MySQL database.
537 kes Implement plugin restore.
538 kes Implement parsing of db_driver to give db_type index.
540 kes First cut of plugin restore code.
541 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
542 and do not strip paths on symbolic links.
543 kes Set catalog backup database and user name from values specified on
544 the ./configure line.
545 ebl Fix #1031 about wrong pool source information in job report.
548 kes Remove a redundant jcr argument to find_files, match_files, and
550 kes Implement '.status dir header|scheduled|running|terminated' that
551 prints the requested status section. With the exception of the
552 header, the other reports have fields separated by tabs (\t).
554 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
555 a resource embedded run command to find a since time if no explicit
556 since time was supplied on the command line.
557 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
558 that updates the state file at job termination time in addition to
559 when the daemon terminates.
561 kes First version where a plugin did a backup.
562 bpipe-fd.so created a backup file, wrote a test
563 string to it, and Bacua could restore this fabricated file.
565 kes Implement DB Driver = string for the DBI driver.
566 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
567 kes First cut of code for loading Win32 plugin dlls. Implement
568 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
569 and implement a dlfcn.h file based on opengroup's definitions of
572 kes First cut plugin directives.
574 kes Apply patch from bug #1049 to prevent stripping the path on a
576 kes Attempt to fix bug #1047 where stripping a path corrupts the
577 heap. Waiting for feedback.
578 kes Correct the Mount message not to suggest labeling a new tape
579 when doing a restore. Submitted by email by John Stoffel.
580 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
581 FD by using casting. Reported in bug #1042.
583 kes A bit of crypto cleanup. More later.
585 Release Version 2.2.8
587 kes Apply patch from Martin to correct bug #1040, bscan sets existing
589 kes Fixed important spelling error in doc -- bug #1045.
591 ebl Fix bextract to be able to extract non-portable Win32 data to
593 kes Move initialization of read/write res lock earlier in the code.
594 This fixes the crash with a null conf file. This fixes bug
596 kes Redefine CURES in lib/parse_conf to be URES and move it all
597 into lib/parse_conf.c -- this responds to bug #1042, but does
598 not fix it. The fix is not to compile with FORTIFY_SOURCE.
599 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
600 the trunk SVN. I don't think this was reported as a bug.
602 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
604 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
606 kes Add DataDespooling and DataCommitting status (committing is
607 the last despooling).
608 kes Finish implementation of new reservations code noted below.
610 kes Fix bsnprintf for float point numbers. I broke recently when
611 parameterizing some variables. This fixes bug #1036.
612 kes Undo recent reservations changes ... will apply them later
613 when they work better.
615 ebl Fixes #1034 which cause mysql to hang the connection after 8h
616 ebl Change default statistics target of filename.name and path.path
617 fields for PostgreSQL. This speeds lookup by indexes. Thanks
619 kes A few more tweaks to new reservation code. Make sure to clear
620 vol released flag when retaking volume. When reading label and
621 label is bad mark volume unused. When recycling, mark volume
622 unused so it can be renamed.
624 kes Fix reserve_volume() so it doesn't release a volume in use
625 (i.e. a volume entry not marked released). This should be
626 the last part needed to fix bug #1018.
628 kes Move Heartbeat documentation from Job to Director resource.
629 This fixes bug #1033.
631 kes Fix existing switch drive SD code to call autochanger to release
632 any old volume. This must be done to keep the autochanger from
633 releasing subsequently newly reserved volumes in doing a close().
634 This should fix bug #1018.
635 kes Fail if attempting to get console input in batch mode. This
636 should help fail RunScript console commands that are incomplete.
637 kes First cut implementing switch_drive() in SD (not actually called).
639 kes Implement first cut running console commands in a RunScript.
641 ebl Fixes bug #1028 where 'Selection Type' option was not usable
643 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
646 Release Version 2.2.7
648 kes Add new free_tls() entry point so that Win32 builds.
649 kes Fix compile warning in src/lib/util.c
650 kes Fix entry point for edit_job_codes() so that Win32 builds.
651 kes Fix seg fault Frank Sweetser reports in regression testing
652 on his systems. The problem was that the original author of
653 bsnprintf.c did not take into account the side effects of
654 using ++x in the argument to a #define.
655 kes Make SD protocol backward compatible with version 2.2.x.
657 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
658 because Bacula no longer restores sockets.
659 ebl Always use ignorecase fileset option on win32 FD.
661 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
662 that implements double quoting include names in conf files,
663 and also allows piping input by having the first character
664 be a vertical bar (|).
665 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
666 that implement %f in RunScripts to pass the FileSet name.
667 kes Skip leading | when lex input comes from a pipe as suggested
668 by Michael Stapelberg <michael@stapelberg.de>.
670 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
671 Nerijus Baliunas <nerijus@users.sourceforge.net>
673 kes Implement Plugin Directory and plugin events.
675 kes Implement a security enhancement: TLS authentication but no
676 encryption. Enabled by setting 'TLS Authentication = yes'.
677 Note when this is on, TLS encryption is turned OFF!
679 kes This patch corrects a problem where the maximum concurrent storage
680 jobs counter gets out of sync during restore jobs causing jobs to
681 'wait on max Storage jobs'. This patch fixes bug #1009.
683 kes This patch fixes bcopy so that it produces correct Volumes.
685 kes This patch eliminates spurious output to the console during a VerifyVolume
686 job that contains encrypted data. It fixes bug #1024.
688 kes This patch prevents the 'status dir' command from trying to use a scratch
689 volume and possibly moving it from one pool to another. This patch fixes
692 kes Add new include to postgresql.c suggested by Marc Cousins so
693 that it compiles correctly with pgre version 8.3.
695 kes Fix --archivedir addition to configure. Replace it with
696 --with-archivedir in configure.in This fixes the regression
698 kes This patch fixes bug #1012 where the job is canceled because
699 of Max Run Time exceeded when the job has not yet started.
701 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
702 one 'part' to write. Instead of each part being stored on disk,
703 written to DVD, then deleted from disk, all parts are written to disk,
704 and only the last is written and deleted from disk.
705 kes This patch fixes the status command to include the formating string for
706 JS_AttrInsterting. It fixes bug #1021.
707 kes This patch should fix the Mac OS X build problem on the latest
708 Darwin, where sys/types.h was not included correctly (apparently
709 due to a change in the Mac headers). The solution was to explicitly
710 ensure that it is defined for the ./configure.
711 This patch also has a rebuild of configure that includes the Debian
712 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
713 kes This patch should ensure that queued messages to the console are
714 displayed as soon as possible. It should fix bug 1007, but has been
715 reported not to work.
717 kes This patch fixes the infinite loop when trying to increase the
718 maximum number of volumes in a Pool during the add command.
719 This patch fixes bug #1008.
721 Release Version 2.2.6
723 db Remove extra data on estimate command in joblist for bat.
725 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
726 really change anything, but is the beginning of doing it *right*.
727 To do it completely right the LastWritten date must be passed to
728 the SD, but it is not yet done.
729 kes Minor tweaks to some bat restore SQL.
730 kes This patch fixes bug #1003 where putting the message output from
731 a Verify job into the catalog results in a recursive loop. The problem
732 seems to show up only with postgresql (to be verified).
733 kes Correct %x to %p in postgresql debug statement.
735 kes Fix bug #942 where lots of emails where generated when the heartbeat
736 interval was low and Bacula wanted a different tape from the one in
739 ebl Add new SD despooling attributes and Dir inserting attributes
740 job status codes in the catalog (Status table).
742 ebl Use qmake-qt4 instead of qmake when available (debian system).
744 kes Add a security warning to src/cats/make_catalog_backup.in indicating
745 that passing the password via the command line (arg 3) is insecure.
746 This responds to bug #990 (it doesn't fix it).
748 kes Set default debug_level to zero. This corrects bugs #991 and #993.
749 kes Fix a crash in bat when it cannot connect to the Director for example
750 if the Director is not running.
751 kes Remove redundant INDEX (JobId) from File table in the trunk.
753 kes Make explicit exception to GPL in LICENSE to permit linking
754 the Win32 FD with Microsoft VSS code.
755 kes Apply the Solaris package patch from
756 Masopust, Christian <christian.masopust@siemens.com>
757 kes Apply the patch to optionally add a timestamp in the debug output
758 submitted by Mariusz Czulada <manieq@wp.eu>.
760 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
761 backend (sql_strerror). Fixes bug #989
763 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
764 It applied with no problems.
765 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
767 kes Redirect stderror to stdin on mt status command in mtx-changer.in
768 since the status is returned on stderr on Solaris.
769 kes Activate Close button on tray-monitor window. This fixes
771 kes Check for NULL item in parse_conf.c before calling it. In the
772 case of Device, there is no item and this caused a seg fault when
773 Device appears in the conf file.
774 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
775 avoids pulling in config.h multiple times in some new code.
777 kes Fix spurious warning message printed when creating a volume with
778 a LabelFormat. This fixes bug #976.
780 Release Version 2.2.5
782 kes Add JobId in place of Job name in all the Jmsg() output.
783 kes Correct the APP_DESC for the Win32 storage service (remove an e).
785 kes Make maxvol-test and new more strict maxvol2-test work.
786 kes Print JobId in all Jmsg() job output.
788 kes Add new SD despooling attributes and Dir inserting attributes
789 job status codes. This fixes bug 961.
790 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
792 kes Fix doc issue. This fixes bug #963.
793 kes Fix listing performance problems in bat. Pointed out by
795 kes Remove old debug code.
796 kes Fix bat code that tests for Win32. This should fix bug #968
797 kes Query 5 list wrong Vol after migration. This fixes bug #960
799 ebl Fix #969 where user can't change Replace option in restore menu.
801 kes Save jcr in thread specific data (tsd) for each thread.
802 kes Make Dmsg() print JobId as -%u.
803 kes Make Jmsg, Emsg, and others automatically pickup the jobid
804 for the thread if it exists.
805 kes Remove old reservation debug jid code.
806 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
807 ebl Add an option that permit to specify spool size in job
808 definition. (Applying patches/testing/spoolsize_per_job.patch).
809 You must upgrade SD and DIR at the same time.
810 dvl Add new configuration item --archivedir
811 dvl Adjust regression tests to use tmp not /tmp. This will allow
812 multiple concurrent runs of the regression tests.
814 kes Fix race condition that drops final block written to volume.
815 This happens in rare cases with multiple simultaneous jobs
816 when the Volume fills. This fixes bug #964. May be related
817 to bug #935 and possibly #903.
818 kes Eliminate more strerror() and replace with bstrerror().
819 kes Remove BSD getopt and replace with unrestricted IBM version.
820 kes Fix Win32 build for changed calling sequences.
821 kes More tweaks to the mount volume routines to get everything
822 right. Changed variable name from find to have_vol, which is
823 much easier to understand.
824 kes Enhance btimer debug code.
826 kes Fix FD->SD authorization failure, which was due to spurious
827 wakeups from a pthread_cond_timedwait(). Simply check the
828 predicate before continuing. This fixes bug #953.
829 kes Add const char where needed (more to do). Remove temp debug code.
831 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
832 kes Don't overwrite error message in check_tables_version.
834 kes Unlock batch insert tables with same calls used elsewhere.
835 kes Allow starting 59 jobs a second.
836 kes Make SD session key more random.
837 kes Add retry for SQLite opening db if it fails. Probably helps
839 kes Suppress extra error messages during batch insert failure.
841 kes Add jcr to timer packets so if killed message can be sent to job.
842 kes Add JobId to all Dmsg() output.
843 kes Put some FD auth code on dbglvl rather than fixed.
844 kes Return insert attributes error message in db msg buffer to avoid
845 false error messages. Helps fix bug #966.
846 kes Separate batch init error messages. Probably helps fix bug #966.
847 kes Make SD code that contructs attribute insert check string lengths
849 kes If Dir gets an error during inserting attributes, cancel SD.
850 This reduces unnecessary error messages.
852 kes Correct search boolean for getting Volume info
853 ebl Cleanup batch insert code. Probably fixes bug #965.
854 kes Back out one small change to the reservation system (reserving a volume).
855 kes Rework how a Volume is mounted. It is now much more intelligent and
856 will always attempt to use any mounted volume if possible and reduces
857 calls to the Director asking about volumes.
859 kes Turn off some code when batch insert not enabled.
860 kes Edit FD name in connect error messages.
861 kes Rework the reservation system to take into account that the Director
862 might give us a Volume that is different from the current one being
863 used, and to ensure that we don't exceed Maximum Volume Jobs.
864 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
865 fatal error with multiple jobs running'
866 kes Add more debug code in reservation system.
867 kes Implement maxvol-test to check bug #947.
869 kes Add code to handle tray monitor separated from Win32 FD.
870 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
872 kes Add missed return in fixing verify bug -- trunk only.
873 ebl Fix a command parser issue causing a director segfault.
874 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
876 kes Increase the max block size to 4MB fixes bug #957.
877 kes ERABT if user sets min block size > max block size. Fixes bug #956.
878 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
879 is not properly mounted (recognized) during a poll.
880 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
881 Job that has differences reports Verify OK.
882 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
884 ebl Add an option to operate on all pools with update vol parameters.
885 This complete the project 20. Patch from Nigel Stepp.
886 ebl Add history support to bconsole when using readline.
887 Using Ctrl-D to exit doesn't update .bconsole_history
888 kes Modify new volume algorithm to use max MediaId for generating next
889 volume number rather than the count of Volumes. This should essentially
890 eliminate the failure rate if some volumes were deleted. Bug #921.
891 kes Begin implemention of Optimize Job Scheduling.
892 kes Implement restore callback that Dirk and I agreed on for bat
893 restore. This fixes bug #928. Restore of backup of zero files fails.
894 kes Fix SQL Catalog logging which broke with new db_escape_string
897 Release Version 2.2.4
899 kes Fix bacula_cats.def for new db_escape_string().
900 kes Increase size of name string when FD making connection to SD.
901 May fix bug #953. FD->SD connection failure.
903 kes Add code to help Dan debug 2drive-incremental-2disk test.
904 kes Add code to try to fix bug #908.
905 kes Add waits to multiple exit detection code to try to force pid
906 file to always be deleted.
907 kes Restore good dev.tar.gz to rescue set appropriate binary property.
909 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
910 trying to switch drives by checking for blocking before unblocking.
912 kes Cancel storage daemon in all cases where FD reports error. This
913 should fix virtually all cases of bug #920.
914 kes Fix db_escape_string() for MySQL which did not compile.
916 kes Fix error message that was clobbered when Dir tells SD it does not
917 have write permission on Volume. This should fix a minor point
918 in bug #942, but not the main problem.
919 kes Add code to cancel job in SD if FD connection fails. This should
921 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
922 dvl Pass jcr and db into db_escape_string() to enable better escaping
924 kes Fix migration code to get correct Volume name with multiple volumes
925 by skipping |. Fixes bug #936.
926 kes Implement patch supplied by Landon to fix bug #944 where using
927 TLS with bconsole uses 99+% of the CPU.
928 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
930 kes Move patches into patches directory.
932 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
935 ebl Using 'm' in bconsole will show messages like before,
936 and not memory usage.
937 kes Fix bug #935, and probably also bug #903 where files were not
938 restored. MediaId was not properly set in JobMedia record after
941 kes Suppress chown and chmod error messages if the FD is not running
944 kes Apply Martin Simmons' patch that should turn off the new API usage
945 when batch insert is turned off allowing building on older
947 kes Add ./configure search in qwt-qt4 for qwt package
949 kes Bacula is now free of 3rd party GPL copyrighted code!
951 kes Add guid_to_name.c/h which replace idcache.
952 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
954 ebl Detect if new PosgreSQL batch insert API is present.
955 kes Correct incorrect mempool call causing Director crash. Occurs on
956 systems without va_copy().
957 sb Update spec files for 2.2.1 release
959 kes Fix memory pool call in ua_output.c. bug #934.
960 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
961 Add test program to fnmatch.c
963 kes Integrate patch to README.vc8 from
964 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
965 edit it to get it into Unix patch format.
966 kes Implement mkpath.c to replace old FSF makepath.c
968 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
970 Release Version 2.2.1
972 kes Update POTFILES.in
973 kes Cleanup a few underquoted AC_DEFUNs in configure
974 kes Apply patch from Martin Simmons that adds a test for va_copy to
977 kes Fix bug #921 by increasing the number of tries to create a new volume
979 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
980 can be called multiple times. Implement a version for machines
981 without va_copy() that gets a big buffer.
983 kes Integrate more portable zone offset code into bsmtp.c
984 Submitted by Attila Fülöp.
986 kes Fix bad SD->FD return status reported by
987 (James Harper) <james.harper@bendigoit.com.au>
988 ebl Fix a bug in read_close_session which return random status
989 thanks to James Harper
991 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
992 and directory names during restore of single file/directories.
993 kes Add sanity checks to .sql command when string is empty. Hopefully
994 that will resolve Dirks Director crash.
996 kes Apply patch submitted by Martin Simmons that corrects a seg fault
997 in the bsmtp chat subroutine when debug is >= 10.
999 kes Fix Director crash when running bat SQL queries.
1000 kes Add David's notes on Item 8: Copy pools.
1002 kes Rework projects file to be current and ready for a vote.
1003 kes Enhance lex scanner error message.
1005 kes Tweak LICENSE file to mention BSD code.
1006 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1007 if specified on the ./configure.
1008 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1009 This class is intended to allow us to open a second bsock to the
1010 Director while in the restore subdialog.
1012 kes Fix configure to create bat Makefile before creating dependencies.
1013 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1014 kes Add a tooltip to the tray monitor.
1015 dvl Set the Director's PID file before dropping privs. This fixes
1018 kes Update AUTHORs file
1019 kes Increase the default max concurrent jobs to 20 in FD and SD to
1020 correspond with the default .conf files.
1021 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1022 some different, of the same file created by RN when porting the
1024 kes Rearrange some of the Win32 directories and the placement of the files
1026 kes Set DEVELOPER flag in version.h
1028 ========================================================================
1029 Release Version 2.2.0
1031 kes Apply a second doc patch from Marc.
1032 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1033 improves the tips section that discusses how to setup multiple
1036 kes Update bat README file.
1037 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1038 corrects a typo in the Recycle status check in db_find_next_volume().
1039 This will probably fix a number of annoying problems with multiple
1041 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1042 bnet calls -- no functionality change.
1044 kes Modify the Verify output to specify if files are missing on
1045 the Volume(s) or disk. Fixes confusion in bug #916.
1046 kes When more than one Volume is read in a migration job, the last
1047 Volume bytes reported are from the last read volume rather than
1048 the last written volume. Fixed. This fixes bug #910.
1049 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1050 It previously printed New Recyle flag is: no. This fixes bug
1053 kes Correct seg fault when switching tape drives during restore.
1054 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1055 be used until after 2.2.0 release.
1057 kes Remove fnmatch() in SD that permitted wild card specifications.
1058 This fixes bug #914.
1060 kes Fix %g in filename returned by SQL for browse tree reported by
1062 kes Fix configure so that it puts config.out in the cwd rather than
1064 kes Attempt to fix the locking problem reported by Eric in bug #906.
1065 kes Make berrno class to leave errno unchanged after constructor call.
1066 kes Make bnet_server use the heap rather than the stack to allocate
1067 its socket fd pointers to avoid a crash at termination. Problem
1068 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1070 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1071 and putting it in depkgs-qt along with Qt4.3.
1073 kes Rework code in acquire.c that switches drives for reading when
1074 the Media Type does not match. This should fix bug #906
1076 ebl Fix a director segfault during job setup #907
1077 kes Correct seg fault in postgresql when first operation returns no
1078 rows. Fixes Dirks File browser problem seg fault with bat.
1080 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1081 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1084 kes Implement PopUp YES/NO dialog for bat.
1086 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1088 kes Correct RunScript to terminate job in FD on failure.
1089 kes Change abort_on_error and AbortJobOnError to fail_on_error
1090 and FailJobOnError in RunScripts.
1091 kes Minor tweaks of code formating in RunScripts, principally to
1092 avoid depassing 80 columns.
1094 kes Eliminate one #ifdef Win32 in bsmtp
1095 kes Implement grow tool to grow a file for testing very large databases.
1096 kes Add big-vol-test to test Bacula seeking with > 5GB.
1099 kes Modify find_next_volume() to return all values in Media record.
1100 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1104 kes Update Release notes
1106 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1107 Warning, in previous beta version, all media get from scratch keep their
1110 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1111 This should fix bug #842. Made a note to look at removing the temp
1112 files at the end of the install.
1113 kes Add ability to mount and unmount a file device providing it is
1114 marked as being removable and has the appropriate mount and unmount
1115 commands defined in the Device resource. This fixes bug #830.
1116 kes When applying a storage override, release all previous storage
1117 definitions rather than just prepending the new storage.
1118 This should prevent a good deal of confusion.
1120 kes Implement ./configure search for qwt libraries.
1122 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1123 Win32 FD. This should fix bug #893.
1124 kes Remove an unnecessary beep in Win32 init code.
1125 kes Update copyright dates in Win32 executable about boxes.
1126 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1127 code with a BSD getopt.c and getopt.h.
1128 kes Remove sched.h from the Win32 compat directory -- not used.
1129 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1130 need to shut it down, do it through the services panel or the command
1132 kes Remove some inappropriate Bacula FSFE copyrights.
1133 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1134 kes Fix regress config non-portable test as pointed out by
1135 Florian Heigl <florian.heigl@gmail.com>
1136 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1137 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1139 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1140 Reported by Frank Sweetser.
1144 kes Fix client-only build.
1145 kes Integrate client-only fixes for bsys (initgroups) and conio from
1146 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1147 kes Make arguments to get_scratch_volume() in same order as other
1149 kes Rework the prune_volumes() subroutine so that after purging and
1150 no volume found in desired pool, it will check for a scratch
1151 volume. This prevents recycling the whole scratch pool.
1152 kes Add code to status storage to print boffset_t (largefile support).
1154 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1155 kes You now need a --with-qwt=<dir> to be able to build bat.
1156 kes Update src/win32/cats/bacula_cats.def to include the new
1157 db_get_query_dbids() call on Win32.
1159 kes Correct a problem when selecting a scratch volume and moving
1160 it to another pool that lost some columns.
1161 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1162 kes Enhance Autochanger error messages to include Volume and device name.
1163 kes Rework prune_volumes() code to take account of InChanger flag,
1164 and to handle recycling volumes going to the Scratch pool and
1165 current pool because the RecyclePool directive.
1166 kes Implement a better and more efficient db_get_query_dbids() to
1167 handle creating and passing back a list of DBIds.
1171 kes Start work on new more efficient DBId subroutine. First use
1172 will be for recycling volume to Scratch inchanger.
1173 kes Increase number of JobIds in pruning from 1000 to 10000.
1174 This to be replaced by above routine.
1175 kes Begin implementation of building Qt4 on Win32.
1176 kes Correct typo in fix I added for bad TLS shutdown.
1177 kes Pull 2.0.3 patches into patches directory.
1178 kes Update Release notes. Include qt-console in line count.
1179 kes Update Projects file.
1181 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1182 bug in migration code where a job that spanned two volumes
1185 kes Implement new BST_DESPOOLING blocked state. Change from locking
1186 during despooling in SD to blocking. This means that other threads
1187 can work with the device structure, in particular the reservations
1188 system while despooling.
1190 kes Fix return in reservation message queue that missed clearing
1191 the jcr lock (implemented 26Jun07 below).
1192 kes Rename a number of dev methods to make locking function names
1194 kes Document locking in lock.c. Move lock structures to new file
1197 kes Move reservations message lock to lock jcr only this
1199 kes Move main SD locking code into lock.c (new file).
1200 kes Update Win32 build to include lock.c
1204 kes Dirk committed the qwt library code for drawing graphs in bat.
1205 kes Tweak install of qwt so that it is integrated with ./configure.
1207 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1208 out by Eric (my typo).
1209 ebl Fix configure.in to get batch mode enable
1210 kes Return correct string from authenticate.cpp in bat when connecting
1212 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1213 spurious line drops when using TLS.
1214 kes Do not file reparse points when restoring a file that already
1217 kes Implement Windows reparse points -- similar to directories, but
1218 we do not descend into it. This is a first cut. They seem to
1219 be backed up, but restore is not yet tested.
1220 kes Remove restore_blocking in tls code when shutting a socket to leave
1221 it in blocking mode. Hopefully this will fix the encryption bug
1222 reported by Frank Sweetser.
1223 kes When opening a file for backup, tell the OS that we are going to
1224 read it sequentially -- optimization.
1225 kes Change variable names in authenticate_director() to not conflict
1226 with member names in bat. Caused great confusion with compiler,
1229 kes Queue openssl error messages in case of comm problem.
1230 kes Do shutdown() call if socket terminated.
1231 kes Remove some duplicated code in tls.c
1232 kes Move more of the bsock member variables into private and access
1234 kes Add Frank Sweetser's tls-test to the regression suite.
1236 kes Add Swedish sv.po file
1238 kes Don't print clock skew message in FD if less than 3 seconds diff.
1239 kes Add a bit of VSS info to status client.
1240 kes Implement a first cut of Vista VSS, using Win2003 code.
1242 Release: 2.1.20 beta
1244 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1245 loaded tape but uses first drive).
1246 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1247 This was indeed a Win32 issue.
1249 kes Simplify search of autochanger for in-use Volume.
1250 kes Fix exit condition of check for in-use volume. kes Remove
1251 inappropriate my_postgresql_free_result() in db_close()
1253 kes Fix bad return in FD when encryption signature not found.
1254 Probably caused a crash.
1255 kes Inhibit missing encryption signature error messages for
1256 file types where no signature computed.
1257 kes Correct inverted check on autochanger in reservation system.
1258 kes Tweak debug code in autochanger reservation.
1260 kes Add some additional locking in the cats directory in subroutines
1261 that modify packet variables called from batch insert.
1262 kes Rework how dcrs are allocated. new_dcr() can now be called
1263 with an existing pointer, and it will simply clean it up.
1264 This allows the reservation system to test various different
1265 devices, and will permit easy device changes.
1266 kes A bunch of changes all over to handle new new_dcr() calling
1268 kes Work more on the Volume management in the SD. Remember Volumes
1269 for tape drives and for autochangers (even virtual disk changers).
1270 kes When looking at the Volume list to reserve a drive, handle
1271 autochanger names correctly by interating through the changer
1272 devices. Also call the Director to see if a Volume is suitable
1273 for the current job.
1274 kes Fix some bugs in bscan. Make sure all media records are written.
1275 Make sure that valid JobMedia records are written for disk files.
1276 Previously they were completely wrong.
1277 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1278 that the URLs don't change and so that the developers will all
1279 work off the same copy. Rebuild from scrach.
1280 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1282 Release: 2.1.18 beta
1284 kes Fix seg fault in FD from incorrect digest size.
1285 kes Fix argument to non-OpenSSL crypto.c subroutine.
1287 Release: 2.1.16 beta
1289 kes Remove a few malloc()s from the encryption code.
1290 kes Use the class calls to bsock in filed/backup.c and restore.c in
1291 place of the old bnet_xxx code.
1292 kes Implement code that does an on the fly calculation of the
1293 signing digest during restore of encrypted files. It makes
1294 a best guess at the algorithm, and if it is not correct, will
1295 then revert to the old code which reads the file after it is
1297 kes Implement at least one missing crypto stream in stream_to_ascii()
1298 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1299 #877 where a reload with bad syntax causes Dir to exit.
1301 Cut: 2.1.14 beta (not released)
1303 kes Do not free a volume on a tape drive until another volume is
1304 mounted and read, or the autochanger unloads the volume.
1305 This should help the SD re-use volumes that are already mounted,
1306 and should fix bug #886.
1307 kes Apply patch from user brettedgar that allows gnome2-console include
1308 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1309 kes Apply patch from Lucien Weller that fixes day of week calculation
1310 because of DST flag problem. Fixes bug #887.
1312 kes Move find_next_appendable_volume() to after acquiring a valid device
1313 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1315 kes Unable to reproduce bug 872. However added additional testing for
1317 kes Bug #874 resolved by documenting SQLite limitations.
1318 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1319 kes Bug #881 resolved by removing typo in mtx-changer script.
1320 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1321 approval. Added a link to the wiki on the web page, and implemented
1322 a backup from http://paramount.ind.wpi.edu
1324 kes Fix update allfrompool to pass pool name.
1326 kes Convert to pure GPL v2 license.
1327 kes Fix sscanf problems reported by Peter Buschman that caused
1328 a bus error on Solaris.
1329 kes Rework (simplify) the select prompt in bat.
1330 kes Move get_jobid_from_tid() into lib and create a
1332 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1333 should definitely fix the problem of lost error messages in the
1335 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1336 kes Eliminate tcpd.h from the project. Enclose the #include from the
1337 library with extern C ...
1338 kes Add print of signal name when a signal is trapped.
1340 Release: 2.1.12 beta
1342 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1344 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1345 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1346 makes SQLit3 run 30 times faster, though a bit less safe.
1347 kes Implement --with-batch-insert in configure and detection of thread
1348 safe libraries. It is on by default, but turned off if no thread
1349 safe library (e.g. SQLite 2) is available.
1351 kes Fix Bacula PostgreSQL buffer overruns.
1352 kes Do better checking for NULL results returned from PostgreSQL;
1353 implement retry for failed queries; clear results buffer after
1354 failed query. Hopefully this will correct the PostgreSQL failures.
1356 kes Implement algorithm to handle only one appendable volume with
1357 Prefer Mounted Volumes = no.
1358 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1359 returned from a query.
1360 kes Make volume lock recursive.
1361 kes Implement an additional volume reservation algorithm that
1362 starts by considering all reserved volumes then uses the
1363 old brute force algorithm of searching the resources to
1364 find a suitable device.
1365 kes Add new reservations debug code and refine the old code.
1366 kes Update the win32/dll/bacula.defs file.
1368 kes Tweak reservations algorithm to permit a few more cases, i.e.
1369 volume reserved, but on different drive, ...
1370 kes Enhance SD status to include Pool and Media Type for drive in a
1371 more readable format (a bit longer).
1372 kes Fix PostgreSQL double free.
1374 kes Minor refactoring of restore decryption code.
1375 kes Add code to smartall.c to detect double free of a buffer.
1377 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1378 so that bsmtp will create a correct email address (mailbox only).
1379 kes Modify 'memory' command so that the buffers are listed as 'In use'
1380 to avoid confusion with Orphaned buffers.
1381 kes I reworked the OpenSSL include/lib flags to be handled in
1382 the standard Bacula way, which should fix bug #863 concerning
1383 non-standard OpenSSL libraries.
1385 kes Implement Help Browser window for bat.
1386 kes Fix reload bug that reset StorageId to zero.
1388 kes Fix TLS #ifdefing when TLS turned off.
1389 kes Ensure that when labelling a tape with Slot=0 that InChanger
1391 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1393 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1394 add DISTINCT (required by PostgreSQL).
1395 kes Implement BSOCK authenticate_director() method. Eventually will
1396 authenicate all daemons.
1397 kes Move several more functions into the BSOCK class.
1399 kes Add code to tell the OS that we no longer need a cached
1400 file that we were reading. In findlib/bfile.c. Also,
1401 only cache files that we are reading. Thanks to
1402 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1403 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1404 kes Implement script to automatically generate cats and dll .def
1405 files for Win32 dll.
1406 kes Update README.mingw32 to include new .def file generation.
1407 kes Correct typo in UTF-8 error message as reported by:
1408 jhernandez <julianhernandez@gmail.com>
1409 kes Add additional sm_check() code on debug level 1.
1410 kes Set default debug level to 1.
1411 kes Trap SIGABRT in attempt to get traceback.
1413 kes Reduce bat connect timeout from 30 to 15 seconds.
1414 kes More restructuring and implementing BSOCK class in place of
1416 kes Remove a few unnecessary malloc() tests in crypto code.
1417 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1418 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1419 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1421 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1423 kes Fix Verify InitCatalog. The attributes were not pointing to the
1424 correct saved location.
1425 kes Implement message callback so that GUI is sure to get all
1426 daemon messages. Currently displayed in a dialog in bat.
1427 kes Ignore SIGUSR2 (Bacula timer) in bat.
1428 kes Apply regress patch from bug #859 to allow regress to work
1429 with Solaris compiler.
1431 kes Begin adding TLS support to bat.
1432 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1433 clean up lex.c and make it more readable.
1435 kes Move more bnet functions into the BSOCK class.
1436 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1437 kes Complete change of berrno strerror() method to bstrerror()
1439 Release: 2.1.10 beta
1441 kes Cleanup incorrect email addresses in bsmtp.
1442 kes Make bat display initial messages rather than discard them.
1444 kes First cut of adding .mod to the run command.
1445 kes Implement auto display of messages in bat.
1446 kes Enhanced preferences to allow all Bacula output to be
1449 kes Try to make bsmtp date routines more generic.
1450 kes Fixed bug #856 autochanger documentation.
1451 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1452 kes Add new cats entry point so Win32 builds.
1454 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1456 kes Do better checking for the MySQL 64 bit libraries looking for both
1457 .a and .so libraries.
1458 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1459 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1460 kes Require the thread safe version of MySQL during configure. Thanks
1461 to Andre Noll for pointing this out.
1462 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1463 continuing in migration code.
1464 kes Apply implementation of tray-monitor font derived from gnome-console
1465 submitted by Andreas Piesk <a.piesk@gmx.net>
1467 kes Eliminate important memory loss in SQLite
1468 kes Fixed the batch insert MySQL thread specific data that was not
1469 being freed. See cats/mysql.c:db_thread_cleanup().
1470 kes Fix restore before command.
1471 kes Convert old hdr.name to name() in a few places.
1472 kes Implement update jobid command.
1473 kes Return all time_t dates in db_get_job_record()
1474 kes Stop watchdog in SD earlier.
1475 kes Put Pool just after Storage in please mount message.
1476 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1479 kes Update the po files.
1480 kes Fix Verify InitCatalog by making it cache attributes.
1482 kes Change name bacula-bat to bat for man 1 page to correspond to
1484 kes Check for client and store NULL pointers in status command. This
1486 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1487 kes Fix sign extended editing of %p.
1488 kes Clean out a little old #ifdefing in cats/mysql.c
1490 kes If time diff between DIR and FD is more than 600 seconds convert
1491 INFO message to WARNING.
1492 kes Implement heap size display in status for all daemons.
1493 kes Attempt to fix MySQL db open memory loss (not successfull).
1494 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1495 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1496 Query. This looks like a MySQL but but by doing extra releases,
1497 the memory goes away. This should fix bug #847.
1499 kes When backup fails, cancel SD before waiting for sd termination.
1500 kes If SD is waiting for FD to connect during cancel, wake up the
1502 kes Fix fsf code so that errno is correctly reported.
1503 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1505 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1506 so that Bacula doesn't later stumble into a seg fault.
1507 kes Use the term Restore Client in the restore Job report.
1508 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1509 the original job's FileSetId.
1510 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1511 spooling in migration jobs. Not yet tested.
1512 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1513 reading conf file from a pipe. However, do it with open_bpipe()
1514 rather than popen. Not yet tested.
1516 kes Fix an ugly bug where the VolCatBytes were getting updated
1518 kes Implement bconsole memory command that prints current memory
1519 usage, plus smartalloc dump.
1520 kes Clarify some error messages in backup, admin, and migrate.
1521 kes Shrink label dialog to smaller size.
1522 kes Invert Cancel OK buttons on restore to be OK Cancel.
1523 kes More strerror() to bstrerror() conversions.
1525 kes Start implementing bstrerror() in place of strerror().
1526 kes Stripping path -- seems to work.
1528 kes Prevent door and port files from being restored (mostly
1530 kes Free an unreleased buffer in compat code.
1531 kes Change console Job name from *Console* to -Console- to eliminate
1532 Win32 filename problems. Put Win32 path separator when creating
1533 Console file. This fixes bug #846.
1534 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1536 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1538 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1539 to force Win32 error message.
1541 kes First cut strip path. The data should be passed to the FD,
1542 but nothing is done with it yet.
1543 kes Enhance the digest and signature routines in the crypto
1544 library to accept a JCR and to use it to print error messages
1545 so that they will go in the Job report rather than the daemon's
1547 kes Simplify some of the verify signature code.
1548 kes Simplify a few of the alternative returns in the signature
1551 ebl Use only POSIX regex instead of GNU regex in breg.c for
1552 File relocation. It fix broken freebsd compilation.
1553 kes Convert all other Dir files to use new ua class message
1555 kes Tentative fix for missing digest signature in bug 807.
1556 kes Correct handle problem in new win32_ftruncate routine.
1557 kes Convert ua_purge.c and ua_update.c to use new ua class
1558 message routines for bat.
1560 kes Correct incorrect installation of LICENSE in Win32 installer.
1561 kes Display LICENSE at the beginning of the Win32 install.
1562 kes Attempt to correct the need for the png files to be installed
1564 kes Reapply my bat.conf install script in qt-console. I think I
1565 editted bat.pro instead of bat.pro.in and it was lost.
1566 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1567 the /var/lock/subsys for subsysdir. Also corrects typos in the
1570 kes First cut update job.
1571 kes Correct configure to include qmake of src/qt-console directory.
1573 kes Make restore job yes/mod/no print in one command so GUI works.
1574 kes First cut implementing backup and restore client.
1575 kes Correct editing in Verify output that caused a seg fault.
1577 kes Insure that bat.conf is not overwritten during installation.
1578 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1579 while I was implementing migration in March 2006 !
1581 ebl Cleanup file relocation, using char *RegexWhere instead of
1582 char *where + bool where_use_regexp
1583 kes Update some manpages and add bat manpage.
1584 kes Make a first cut at converting bacula.spec.in for bwx-console
1586 kes Apply patch from John Goerzen to add hostname as fourth argument
1587 to make_catalog_backup script.
1588 kes Fix typos I introduced into bsmtp.c
1589 kes Make pm_strxxx() routines handle input of NULL pointer. This
1590 is to protect from NULL pointers returned from SQL databases.
1591 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1592 kes Add more debug to FIFO code -- fix fifo regression test.
1594 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1595 kes Add thread timer to bnet_connect() to break from OS if wait time
1598 kes Update Win32 build to include new files, new symbols, and
1600 kes Implement socket level heartbeat (tcp_keepidle)
1601 ebl Commit File relocation patch
1602 kes Make bat have 'make install' target.
1603 kes Warn during install if old gnome-console binary found.
1604 kes Warn during install if old wx-console binary found.
1605 kes Add -8 option to bsmtp command line to add content type utf-8.
1606 Fixes bug #809. (Character coding problem in bsmtp).
1607 kes If < is found in target (from, to, cc) then do not enclose the
1608 target in < > in bsmtp. Fixes bug #772 (malformed address).
1609 kes When printing certain items in dbcheck, stop after 300000.
1610 Fixes bug #822. (dbcheck loops).
1611 kes Incorrect status in Dir after waiting for mount with poll set.
1614 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1616 kes Print waiting to reserve a device every 5 mins.
1618 kes Don't call close_part in label.c if tape and relabel.
1619 kes Don't free volume if busy in close() -- should help with
1621 ebl Fix #824 RunScript bug (After script could be execute twice)
1622 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1623 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1624 Add a regression script to test RunScript
1626 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1629 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1630 deprecated. No additional bugs will be fixed, and they will be dropped
1631 in a future release (probably 2.4.0).
1632 kes Change name of wx-console to bwx-console to make it more Bacula
1634 kes Change the name of gnome-console to bgnome-console to make it
1637 kes Some time in March, a Feature Request with patch from Jorj Bauer
1638 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1640 The ability for the director to validate a Client (FD) CN against
1641 an arbitrary set of patterns rather than the hostname, with
1642 A new 'TLS Allowed CN' set of directives which are implemented
1643 in the Client resource. Then pattern matching is used in place
1644 of hostname matching against the Certificate's CN. As an example, we
1645 have certificates which (a) use a local CA, and (b) have a CN of the
1647 kes Add new/changed entry points to Win32 build
1648 kes Create unaccepted-projects for projects that are not accepted.
1649 kes Simplify locking in the reservations system.
1650 kes Add more debug code in reservations.
1651 kes Make sure error condition on reserving a volume is handled correctly.
1652 kes Correct handling of volume_in_use.
1653 kes Correct handling of initializing a device.
1654 kes Move handling of broadcasting releasing a device into release_device().
1655 kes Correct attaching dcr to dev so that it is only done if device
1656 is properly initiated.
1658 kes Locking debug level tweaks in SD.
1659 kes Tweak new Volume code.
1661 kes Add exec external-command [wait-seconds] to bconsole. This
1662 executes the external-command. Note! normally external-command
1663 should be enclosed in double quotes.
1664 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1665 it should normally be off in a production system.
1667 kes Implement die command for SD so that we can force it to dump.
1668 kes Implement SD lock debug code.
1669 kes Implement new algorithm for keeping Volume list in SD. It
1670 is now owned by the device.
1672 kes Implement new code for freeing in use volumes that should
1673 resolve if not all, some of the problems of multiple drive
1674 tape conflicts described in bug 801.
1676 kes Fix gui/bacula-web/images files in svn.
1677 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1679 ebl Fix a bug in batch mode (in string escape)
1680 kes Correct migration prune SQL typo that crept in in a
1681 recent 2.1.x change.
1683 kes Move bnet_despool() into class in bsock.c
1684 kes Modify job report to include director name and Build OS.
1685 kes Move drop root privilege and check_catalog() before fork.
1686 kes Add update database scripts (version 9 to 10) to updatedb directory.
1688 ebl Check size and age of each file after its backup to see if
1689 it has changed during backup, if 'checkfilechanges' is set.
1690 The FD will do an extra check (stat(2)) after
1691 each file backup. mtime, ctime and size are compared with
1692 'before backup' information. If time or size mismatch, an
1693 error message will be generated. You must upgrade FD to use it.
1695 kes Make database name and user configurable
1696 --with-db-name=xxx --with-db-user=xxx
1697 kes Add back database type to message.c for debugging.
1699 kes Implement dir_sql() which issues an SQL query.
1700 kes Modify bat medialist to use dir_sql() and do some minor C++
1701 formatting as well as eliminating a number of pointers, simplifing
1704 kes Fix some of the mtx-changer grep commands for tape label readers.
1705 kes Convert a number of bsendmsg into the appropriate send/warning/error
1706 message class calls.
1707 kes Suppress the using database message in the .sql command.
1708 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1710 kes Add context menu for floating a window.
1711 kes Some minor cleanup and name changes in qt-console
1712 kes Add doing mt setblk 0 in Win32 mtx-changer.
1713 kes Apply Martin's bug fix to move definition of ENODATA for
1715 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1716 sqlite2 and sqlite3.
1718 kes More pruning cleanup.
1719 kes Turn on wait_for_drive by default in mtx-changer.
1720 kes Turn on Batch insert code by default as it now passes regression.
1721 kes Add ./configure --enable-bat to enable building of Bat.
1722 No install yet though.
1724 kes Implement a new .sql command for bat.
1725 kes Implement code to turn off pruning in obtaining the next volume.
1726 Pruning is turned off for the status dir command, but turned on
1727 for SD requests and for the list nextvolume command.
1729 kes Correct Qmsg() that was not updated correctly when committing a
1730 previous change (probably the recent TLS patch).
1732 kes Write new subroutine is_volume_purged() that explicitly checks
1733 if the Volume is purged, and if so marks it as such. This should
1734 resolve problems reported about needing to mount twice to recycle
1736 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1737 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1738 amount of duplicated code.
1739 kes Do volume pruning only for the Media Type desired (reduces pruning time
1740 if multiple Media Types are in the same pool).
1741 kes Implement more detailed info in the Job report for the Bacula version
1743 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1745 ebl Add bbatch tool to bench database and insert mode.
1746 Fix sql quote stuff in batch mode
1747 Fix sql stuff for mysql
1749 kes Correct problems with am/pm scheduling. Fixes bug #808.
1750 kes Implement new prunning code that prunes up to 1000 jobs at
1751 the same time. The same technique can be applied to a number
1752 of other prune/purge subroutines.
1753 kes Add an insanity check when starting a new tape job to ensure
1754 that the tape position has not been changed. If so fail the
1756 kes Fix Win32 build for dlls to add the folllowing:
1757 src/lib/bsock.c -- new file with new entry points
1758 src/lib/dlist.c -- new entry points
1759 src/cats/sql_create.c -- new entry point
1760 src/cats/sql_cmds.c -- new DATA item exported
1762 ebl batch mode cleanup bscan-test is ok now.
1763 kes Implement SD code to check length of disk volume before appending.
1765 kes Correct return status on db_batch... routines.
1766 kes Add call to db_write_batch_file_records() to migration code.
1767 ebl Fix AfterJob timing
1768 kes Move the checking of the database in initializion of the Director
1769 to after we drop privileges. This avoids the need for both root
1770 and bacula access to the DB.
1771 kes Correct a misplaced variable definition in src/filed/backup.c
1772 kes Correct how the new batch insert db_create_attributes_record()
1773 uses the arguments. Caused a seg fault in bscan.
1774 kes Implement lock() and unlock() methods in DEVICE class.
1775 Implement block() and set_block(xx) methods in DEVICE class.
1776 kes Modify bnet_connect() so that it uses time() to check for the
1777 wait time expiring (on some OSes, some system calls may not
1778 return immediately).
1779 kes Modify Verify to obtain the previous JobId when it is actually
1780 running rather than at schedule time (as it was in 1.38.x).
1781 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1783 kes When checking pid in pid file, continue running if the pid is
1784 the same as ours. This occurs on IRIX after a system crash.
1787 kes Extend new GUI API.
1788 kes Make the ua structure a class, and implement send_msg(),
1789 error_msg(), warning_msg(), and info_msg().
1791 kes Apply fix from for building wx-console on the Mac from
1793 kes Implement new select mechanism for GUI programs.
1794 kes Reorganize initialization of stackedWidgets in bat.
1796 kes Add updated nagios plugin supplied by Christian Masopust.
1798 kes More bat implementation.
1799 kes File migrate bug with Pool Occupancy using mediaid instead
1800 of jobids. Fixes bug #795.
1801 kes Fix orphaned buffers in filed backup and verify due to
1802 crypto buffers not freed during errors. Fixes bug #789.
1803 kes Extend new GUI api code to tree commands.
1804 kes Ensure that tree and dot commands check console ACLs.
1805 kes Permit marking directory with trailing slash.
1806 kes Allow 20 console connections (instead of only 10).
1808 kes Add smartctl call to bacula-sd.conf as an example of getting
1811 kes Modify jobq.c to let simultaneous restore jobs run. This may
1812 cause them to fail if they cannot get a drive.
1813 kes Add Client Connect Wait to Storage daemon to permit users to
1814 modify the time the SD waits for a FD connection.
1816 kes Correct virtual changer check which was backwards. This caused
1817 volumes to be unloaded into slots already occupied.
1819 kes Apply Command ACL filter to JobId list in restore command.
1820 kes Correct typeo in var.c patch.
1822 kes Don't let Bacula prune File or Job records for the current Job.
1823 kes Fix variable substitution pad + inc bug reported (with patch)
1826 kes Correct SQLite log table index as reported by Luca Berra.
1828 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1830 kes Begin implementing new comm signals for API.
1831 kes Fix a few places in lib/message.c where the open fd may
1833 kes Continue implementing lib/bsock.c (real class). Make jcr,
1834 who, host, and port private. There are new methods to access
1835 them for non-class use. This required touching a number of files.
1837 kes Add LANG=C to autoconf/randpass so it works with languages other
1838 than English. Fixes bug #788.
1840 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1842 You will not be able to generate Include/Exclude list any more.
1843 It will be fixed soon.
1844 If you want to use this, you can apply
1845 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1847 kes Restore of sockets created false error messages because Bacula
1848 no longer restores sockets, but the code was still trying to
1849 set the attributes on a non-existent file. Reported by a user.
1850 ebl finish RecyclePool feature
1851 Media will takes Pool.RecyclePool
1852 when moving from Scratch to a Pool or when user will do
1853 update volume=xxx frompool
1854 To use it, add RecyclePool = aPool to your Pool resource
1857 RecyclePool = Scratch
1861 kes Expand new BSOCK class adding signal() and new BNET signals.
1862 kes Begin enhancing the dot commands adding a new API function
1863 that returns more information and will make it easier
1864 to interface to the Director from a program.
1866 kes Make DEVICE fd private. Its new name is m_fd, and can be
1867 obtained with dev->fd() outside the class. This is the
1868 first of many DEVICE members to be made private.
1869 kes Implement Michael Renner's idea on having a virtual disk
1870 changer. I made some minor modifications (e.g. I did not
1871 implement the Virtual Changer directive, but simply set
1872 the Changer Command to an empty string.
1874 kes Implement a BSOCK send() method that writes the whole record
1875 in a single write() request rather than in two.
1876 ebl add update volume=xxx recyclepool=yyyy
1877 volume takes recyclepool from pool when using update volume=xxx from pool
1879 kes Fix encryption deblocking bug, which caused some restored files
1880 to be truncated. This fixes bug #763.
1881 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1882 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1884 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1885 ebl Use btime_t instead of uint64_t in media patch.
1887 kes Optimize the use of the database a bit in the Status dir command.
1888 Only open it when needed, ensure that if any previous database
1889 was opened, it is closed.
1891 kes Correct VolCatBytes bug from media patch.
1892 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1893 in the case of orphaned records.
1894 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1895 and File records in 300K chunks to be more efficient. This
1896 idea came from Juan Luis Frances (if I remember right).
1897 kes Apply Eric's scratch patch that moves a purged Volume to
1898 the RecyclePool. Question: how is RecyclePool set? what
1899 happens to the ScratchPool?
1900 kes Apply Eric's media patch that collects read/write media
1901 times as well as byte counts. This patch requires a
1902 simultaneous upgrade of the DIR and SD. Note, there
1903 should be some way to turn off timing. I'm not sure
1904 times are in Bacula units.
1905 kes Apply Eric's batch-insert patch.
1907 kes Update projects list.
1909 kes Implement Include/Exclude file lists in FD as dlists using
1910 the new dlistString class. This permits efficiently having
1911 large include/exclude lists and completes project Item 25.
1912 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1913 console is authorized to cancel the job. This fixes bug
1915 kes Modify SD so that the VolCatJobs medium record is updated
1916 at the beginning of a Job rather than the end. This
1917 fixes bug #775 where exceeding MaxVolJobs caused jobs
1919 kes Added a mutex around getting and setting Volume information
1920 so that multiple simultaneous jobs will single thread.
1922 Switch to using Subversion
1923 kes Remove src/pygtk-console/ from configure
1925 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1926 plus the entrypoints.
1927 kes Apply patch supplied that corrects debug print
1928 in canceling jobs for max run time. Supplied as
1929 part of bug #621, which was previously fixed.
1931 kes Test on job_canceled() and sd_msg_thread_done inside
1932 loop starting the message thread to avoid a race condition.
1934 kes Remove rl_catch_signal from console.c as it conflicted
1935 with the header definition. Fixes bug #765.
1936 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1938 kes Clarify some stored/acquire messages to indicate if the
1939 problem is with read or append.
1941 kes Fix memory leak with storage ids in cats/sql_get.c
1942 kes Terminate watchdog earlier to avoid reference to released
1943 memory -- reported by Jason Austin.
1944 kes Move closing the database from jobq.c to the director daemon
1945 termination routine. This fixes memory leaks for shadow jobs
1946 (i.e. migration jobs).
1947 kes Free up the unique jobid chain items in migrate.c. This fixes
1948 a memory leak problem.
1949 kes Convert some ugly looking for statements to use foreach_alist
1950 in findlib/find.c. This will facilitate converting the structures
1951 to use dlist (for large include/exclude lists).
1952 kes Fix a bug in the btree.c and btree.h routines, then rename them
1953 rblist and add them to be built in src/lib. Include some new
1954 methods written by Rudolf Cejka that make the code more readable
1955 (hides some of the ugly casting).
1956 kes Add set_next() and set_prev() methods which make the code much more
1957 readable. Also add a new dlistString class that facilitates storing
1958 strings in dlists. To be used in the large include/exclude lists.
1959 kes Make some trivial modifications to lib/tree.h that use rblist
1960 rather than dlist for storing the tree links. This was suggested
1961 by Rudolf Cejka. The result of this is that the restore tree now
1962 uses red-black binary trees rather than simple linked lists. This
1963 should give rather dramatic speed improvements for directories
1964 contining large numbers of directories/files (more than 10000).
1966 kes Fix maxruntime bug #621.
1968 ebl Implement the include JobID in spool file name project.
1969 kes Reorder projects file in order determined by Jan 2007 vote.
1970 kes Implement item #12 on project list -- quick release of FD by
1972 kes Fix open of SQLite3 db where user does not have write permission
1973 so that DIR does not crash. Fixes bug #761.
1975 kes Add back missing @ in Win32 Makefile.
1976 kes Change 'Device not configured to autolabel' from INFO
1978 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1979 which should restart an indefinite # of times.
1980 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1981 other DIR specifications.
1983 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1984 Fix path quoting in SQLite scripts.
1985 Fix problems with SHGetFolderPath.
1987 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1989 kes Fix Job restart on error bug that promotes an Inc to a Full
1990 backup. This should fix bug #755.
1991 kes Add qt-console and first cut of code.
1995 kes Fix Bacula->Documentation link on Win32 to point to index.html
1996 instead of bacula.html. Fixed bug #750.
1997 kes Return JobId in db_get_job_record() when JobId==0. This should
1999 kes Do not release source pointers when restarting a failed job.
2001 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2002 This *should* fix bug #747.
2003 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2006 kes Modify USTORE constructor to set an empty store_source string,
2007 and don't copy the store_source string in a cancel. Hopefully
2008 this will fix Arno's seg fault, bug #744.
2009 kes Add back code to disable conio in configure. Fixes bug #743.
2010 kes Correct the Options scanner in the FD to correctly handle
2011 SHA1 option, which was eating the next option. Reported by
2013 kes Add code to indicate when the SD is spooling, spool wait, and
2014 despooling as requested by Alan Brown.
2016 Version 2.0.0 released: 4 January 2007