1 Technical notes on version 2.5
5 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
6 examples/database/dbcheck.sql
7 enhancement to wait command: wait mount ...
9 filepattern (restore with regex in bsr)
14 ebl Fix bash shell to sh shell in database creation script
16 kes Fix orphaned jobs (possible deadlock) while pruning.
17 kes Use jcr stored in bsock rather than searching in getmsg.c.
18 This results in about a 5% speed improvement with four
20 kes Implement win32_chmod that uses wide characters, if possible,
21 to get and set the file attributes.
23 kes Apply pane freezing during updates patch from Riccardo Ghetta.
24 kes Rework next_vol and autoprune a bit due to failure in
25 recycle-test. prune_volumes() now returns no status,
26 but should prune at least one Volume, if possible.
27 kes Modify check_if_volume_valid_or_recyclable to reject a
28 volume with Recycle set off.
29 kes Modify prune_volumes() to continue if volume Recycle is off
30 or if the volume has expired. Add more debug.
32 kes Fix bug #1046 VolumeToCatalog incorrectly reports mounted
33 filesystems as missing on the Volume.
34 kes Rewrite the set_jcr_job_status() code to include job status
35 priorities so that more important status changes occur but
36 lower priority status changes will not overwrite something
37 more serious. This could possibly cause reporting incorrect status
38 reporting in some cases. More testing is needed to ensure
39 I have the right priorities. This vastly simplifies the previous
41 Verify Diff status should now be correctly reported, whereas it
43 kes Reduce some debug output.
44 kes Apply Joao's patch to SQLite tables to make chars work.
46 ebl Fix #1175 About update slots that don't reset InChanger flag when
48 ebl Fix #1173 where prune_volume() returns a volume from the scratch.
50 kes Remove jobq.c constraint that read and write SD must be
51 different. This may lead to more deadlocks in the SD,
52 but they should be resolved there.
53 kes Ensure that job report is always printed even if job is failed
55 kes Don't print job report twice for failed VBackup jobs.
57 kes Fix editing of retention time difference to use 64 bit
58 int instead of 64 bit unsigned. This should permit very
59 long retention periods.
60 kes Implement code to prohibit a write job from appending to a
61 Volume that will be used for a read operation. This is
62 new code and could possibly cause some conflicts.
64 kes Integrate James Harper's Exchange Win32 plugin patch.
65 kes Apply patch from Marco van Wieringen that implements the new
66 Solaris libsec interface for ACLs so that Bacula can save and
67 restore both the new ACLs and old ACLs.
68 kes Marco's patch also corrects the file dependency generation code
69 so that it works properly both with shared libraries and static
71 kes Marco's patch also includes a small cleanup of the cats Makefile
72 to remove some references to non-existent files.
74 kes Modify win32 Makefiles to use full paths in most cases.
75 In particular add MAINDIR environment variable that points
76 to the main Bacula source directory.
78 kes Add read volume list code to SD -- not yet used.
79 kes Add James' binutils patch
80 kes Split volume management code out of src/stored/reserve.c into
82 kes Modify configure to do an automatic make clean. This ensures
83 that any changes to ./configure options are handled correctly.
85 Beta version 2.5.16 release:
87 ebl Rename JobStat table to JobHistory
88 kes Ensure that only normally terminated jobs are migrated.
90 kes Add Makefile dependency when using LIBTOOL_LINK so that any
91 change in ./configure options will be accounted for.
93 kes Fix typo in the ACL patch that I overlooked.
94 kes Apply Marco's libtool include patch.
96 kes Apply Bastian Friedrich's ACL patch to eliminate ACL
97 errors during restore.
98 kes Minor cleanup of create_restore_volume_list() code.
99 kes Fix typo in console Makefile.in
101 ebl Fix #1110 about RunScript that can't execute a script with
102 Unicode characters in the path.
104 kes Apply tray-monitor patch from Bastian Friedrich to make it
105 work with the new FD.
107 kes Apply cleanup patch from Marco
108 kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
109 that implements libtool to create shared objects out of
110 the Bacula libraries.
111 kes Fix tray-monitor so it will speak to new FD.
112 ebl Fix bug with ANSI label when volume name length < 6
113 ebl Fix segfault in debug level > 50 with btape.
114 ebl Remove warning message in btape when command is empty.
115 kes Fix Win32 build to pull in new BACULA define.
117 kes Change IncludeDir to Exclude Dir Containing.
118 kes Implement code to prohibit ExcludeDirContaining in an
119 Exclude section (same for Plugin and Options). A bit
120 of a kludge with RES_ITEM2 ...
121 ebl Add field to command list to restrict Runscript console
123 ebl Use a separate JCR when running Console command with Runscript.
124 ebl Permit to mark version as Beta in some outputs
126 kes Add plugin types in jcr.h to reduce need to cast.
127 kes Do better checking of plugin return values.
128 kes Free plugin context after calling pluginFree() as
130 kes Allow plugin to call JobMessage with NULL context.
131 kes Do not add plugin to global list if loadPlugin returns error.
132 kes Rework plugin.h a bit to reduce dependence on Bacula.
134 kes Move generation of bsr file for Virtual Backup to run section
135 so that it is generated just before actually running.
136 Suggested by Graham Keeling.
138 kes Add malloc and free Bacula entry points for plugins. Increment
139 FD plugin interface version. Create a Bacula plugin context
140 structure to keep track of whether or not the plugin is disabled.
141 kes Apply FileIndex fix for plugin name stream suggested by James.
142 kes List plugins in FD status report when debug > 0.
144 ebl Add a new VerId variable that is printed in version command.
145 kes Fix migration SQL not to migrate a job that has not terminated.
146 This is a partial fix to bug #1164.
147 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
148 backup start time bug reported by Graham Keeling.
150 ebl Fix possible bug in cancel_job() with job that are not
153 kes Fix bat build for Win32.
155 kes Copy plugin link field into ffpkt.
157 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
158 It provides FileRegex in bsr files and code to collect regex
159 from the user during restore, an Allow Mixed Priorities feature,
160 and documentation for the above.
161 ebl Remove db Berkeley from configure process
162 kes Do dirty check on hostname (Linux only) and if not resolvable
163 use localhost as default.
164 kes Increase vtape max block to 20GB.
166 kes Refactor restore code to create a close_previous_stream(). This
167 This may destabilize the source.
168 kes Implement planned startRestoreFile() plugin call.
169 ebl Remove missing Loaded information from status slots storage command.
170 ebl Fix Console command problem that cancels the job
171 kes Add more plugin restore debug code.
173 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
174 kes Rewrite plugin restore interface a bit to correspond to how Bacula
175 creates and writes to the restored file.
176 kes Add some DebugMessage() calls to the bpipe-fd.c program.
178 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
179 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
180 Bat; allow add and delete in place of mark and unmark.
181 kes Another attempt to fix the endRestoreFile plugin bug noted below.
183 kes Apply dbi driver patch from Joao.
184 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
185 Bastien Friedrich reported the bug.
186 kes Create plugin instance only when FD job starts.
187 kes Add new FD plugin event: bEventCancelCommand when
188 a cancel command is issued to the FD.
190 kes Add cmd_plugin flag to jcr so we can globally know if a
191 command plugin is running.
192 kes If command plugin running, do not attempt (for the moment)
193 to get Win32 extended attributes.
194 kes Ensure that proper Win32 flags are set in bfile packet
195 if plugin_bopen() works on Win32.
196 kes Remove generated src/plugins/fd/Makefile
198 kes Implement build and install of bpipe-fd.so plugin.
199 kes Rework the interface that passes packets to the plugin
200 so that the packet is started and ended by the packet size.
201 This allows the driver to do a sanity check.
203 kes Rework the pluginIO Bacula internal code to enable
204 proper handling of Win32 error codes from GetLastError.
205 kes Apply Joao's patch to regress startover_libdbi.
207 ebl Add -B option to dbcheck to get catalog information
208 kes Fix Win32 build to include new library function.
209 kes Remove some old reader/writer code.
210 kes Implement ./configure --with-plugindir=xxx
211 ebl Fix the mysql bug in the new accurate code
212 kes Improve plugin debug. Create plugin test.
213 kes Set main thread specific data to INVALID because it
214 has no jcr. This allows debug output to work correctly.
215 kes Add src/plugins/fd/Makefile to ./configure process.
216 kes Make first cut attempt to correct SQL that computes the current
217 Pool usage. This is to fix bug #1159.
218 kes Do a bunch of plugin cleanups for Win32 and more careful checking
219 of PluginDirectory and whether or not a plugin was found.
221 kes This code should fix the race condition that leads to a Director
222 crash at job end time when the job list is updated. This was reported
224 kes Add more plugin documentation and fix include of config.h for
225 Win32 build (I hope).
227 ebl Revert to htable instead of rblist
228 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
229 tree instead of htable.
230 ebl Use a dedicate DB link to compute and send the accurate list
233 kes Fix compile errors in filed/fd_plugin.c.
235 kes Remove all double quotes from SQLite creating script and
236 replace by single quotes as suggested by John Huttley.
238 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
239 It significantly improves the performance of dbcheck for
241 kes Fix bad debug code call in src/filed/accurate.c
243 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
244 output. Perhaps we really need to implement M_SAVED.
246 kes Fix bug #1156 FD crash during processing of Accurate data.
247 kes Tweaks to htable code to improved debugging and make names
248 a bit more meaningful.
250 ebl Remove time_t from update_stats()
252 kes Modify the license of the example plugin program to allow
253 it to be used by anyone for making a Bacula plugin.
254 kes Make apply_rp_codes() in bpipe-fd.c be static.
256 kes Remove Encryption and Accurate lines in vbackup output -- not used.
257 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
258 kes Add host name to items printed during dump.
259 kes Make Check File Changes default on.
261 kes Set the default FD timeout to 3 minutes (previously 30).
262 kes Apply Bastian Friedrich's weird spelling correction patch.
264 kes Always print Verify hash differences. Rename variable to make the
265 code slightly more readable.
267 kes Correct tests for MaxFullInterval as reported by
268 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
269 kes Fix MaxDiffInterval code as well.
270 kes Enable Win32 plugin load code in lib.
271 kes Make Verify code that computes disk checksums use the same
272 algorithm as backup when dealing with sparse files.
273 kes Attempt to run VSS on any systems newer than Vista -- should
274 make it work on Windows Server 2008.
275 ebl Change the new statistic implementation. Remove the UseStatistic
276 directive and add a 'update stats [days=...]' command. You can
277 now decide when copy job records from Job table to JobStat.
278 Statistics are much more accurate with this.
280 kes Fix SQL case problem that may cause the failure of DiskToCatalog
282 kes First cut adding SD plugins.
284 kes Add Slot if it is non-zero to writing bsr file after a
286 kes Change a number of bnet_fsend() into class method calls.
287 kes Begin audit of diff of 2.4 branch to trunk code.
289 ebl Fix the mysql creation script that double-created an
290 index of the same field on the Media table.
291 Add an index to on VolumeName to the Media table for mysql.
293 kes Another try at fixing Vbackup. It looks much better this time.
294 Disable file index sanity check in FD with value stored in
295 attributes record because with Vbackup the File Index gets
296 changed, but not the attributes record.
297 Enhance some debug code.
298 Fix handling of re-indexing records that are copied in Vbackup.
300 kes Made level_to_str() know about Virtual backup.
301 kes Set correct Virtual backup write pool.
302 kes Fix compile warning in new dbcheck port code.
303 kes Fix migration code broken by previous virtual backup fix.
305 kes Fix problem of Virtual backup not writing a sequential FileIndex.
306 kes Reset Virtual backup time/date to the value from the last backup.
307 kes Ensure that storage name is passed to SD on read.
308 kes Correct a problem with Level and Virtual backup, rework how
309 bsrs are printed in debug to use standard routine.
310 kes Apply patch from Chris in bug #1133 that provides alternate db port
312 ebl Remove catalog dependency from bcopy tool.
313 ebl Modify catalog scripts to have an easier packaging integration,
314 using default variables.
315 Make difference between SQLite3 and SQLite in db_get_type()
317 kes Apply most of changes in a patch from:
318 Michael Stapelberg <michael+bacula@stapelberg.de>
319 that allow the Bacula FD to compile on IRIX 6.5.
321 kes Apply patch from Bastian Friedrich that accepts a yes on a
322 delete volume command line.
323 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
324 job when reading from one autochanger and writing to another.
325 kes Minor tweaks (copyright dates convert to use method instead of bnet).
327 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
328 drives when no tape is mounted.
330 kes Add additional info to some SD messages.
331 kes Add fix supplied by Martin Simmons for turning off EOL character
332 in new console multi-command code.
334 kes Fix a Verify InitCatalog problem where in certain cases
335 a garbage filename may be entered in the verification database. This
338 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
339 sent in by Riyas Yoosuf.
341 kes Fix seg fault in Dir during estimate command with no level value
342 given. This fixes bug #1140.
344 kes Add message to migration job when the target job is already migrated.
345 This closes bug #1129.
348 kes Raise some restore debug levels.
349 kes Replace off_t by boffset_t where ever I found it.
351 kes Define a machine dependent ioctl request type for use with
354 kes When a migration job actually runs, re-check the Job record
355 and skip if the job is already migrated. This should
356 significantly reduce the problems with bug #1129.
358 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
359 turn off glibc checks that prevent getting good dumps.
360 kes Implement console 'wait mount' command. Doesn't yet work.
361 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
362 kes Break the do_swapping into do_unload, do_swapping, and
363 do_load. It is much more logical that way.
364 kes Implement a set_dcr_from_vol subroutine in acquire.c for
365 reading volumes. This allows the dcr to be refreshed after being
366 zapped when the wrong volume is mounted.
367 This should fix bug #1126 -- During multiple tape restore, bacula
368 does not ask for physical tape change, but rereads same tape
370 kes Apply patch submitted for bug #1107 with a small modification.
371 This fixes a bug where bcopy copied too many records.
372 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
373 This fixes bug #1124.
374 kes Make the default bat restore Pool be Any. This fixes bug #1118.
376 kes Remove debug statement that crashes the SD at the end of
377 a tape during restore. Fixes bug #1125.
379 kes Implement Win32 bat changes made to Branch-2.4
381 kes Tweak separator command in console to start disabled and
382 allow defining no separator character. Also make code a
383 bit more fault tolerant.
384 kes Make btraceback write the traceback to the working directory
385 before attempting to mail it.
386 kes Add a RFC to Projects.
388 kes Attempt to implement a kludge to make Qt work with bat
390 kes Setup rstorage correctly. Virtual backups are working.
392 kes Move setting JobLevel and JobType into a method, which should
393 allow completing Virtual Backups.
394 kes Fix verify jobs to work again.
396 kes Virtual Backup tweaks -- it is close to working.
398 kes Ensure that SD tried to mount a volume not in an autochanger
399 at least once before asking for operator intervention.
400 kes Make SD aware of Virtual Backup jobs.
401 kes Add VirtualFull for bat.
402 kes Changes to get read storage correct for Virtual Backup.
404 kes Remove old code from label.c
405 kes Split display_display_info() out of write_bsr_file()
406 kes do_vbackup_init() working -- i.e. bootstrap file built.
407 kes Change Bacula trademark owner from John Walker to Kern Sibbald
408 kes First non-working cut of vbackup
409 kes Correct FD heartbeat code to use volatile variable accessed by
411 kes Zero thread id with memset if on Win32 in case it is a struct.
412 kes If cannot create JobMedia record, continue to try to write eof
413 and clean up in block.c
415 kes Add code to interface OpenSSL to new Win32 pthreads code which
416 used a structure for thread_t.
418 ebl tweak bat for win32 compilation
420 ebl Remove tokyo cabinet from the source
421 ebl Update configure/autoconf to support berkeley DB
422 ebl Add a sort to db_get_file_list() to improve bsr construction time.
424 kes Add a mtx-changer.conf file that is not overwritten during
425 an upgrade. It fully configures the mtx-changer script.
426 kes Clear in-use bit on vol when unused while swapping.
428 kes Remove sleep at end of ./bacula
429 kes Clear hash packet for hardlinked files correctly. This corrects
430 a long standing bug where hardlinked files selected individually
431 would occasionally not be restored.
433 kes Apply Eric's patch to ensure that autoprune does not return
434 a Volume not in the autochanger unless requested to do so.
435 kes Correct bat restore display of multiple drives. This fixes
437 kes Do find_a_volume() each time an unload is done. This
438 fixes the failure of maxvol2-test.
440 kes Add some SD debug code.
441 kes Do find_a_volume() each time an unload is done.
442 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
443 and adds --with-db-port to ./configure.
444 kes Use Qmsg() in job.c watchdog callback.
446 kes Release main control rwlock if ABORTing.
447 kes Make watchdog connect timeout queue messages rather than sending
448 directly to avoid lock conflicts with the real thread.
449 kes Add const char in dbd.c to avoid compiler warnings.
450 kes Fix python compiler string warning. Note, IMO the GNU C++
451 compiler guys have made a *very* bad change to their compiler.
452 They now force all strings to be 'const' unless you explicitly
453 cast them, which is extremely ugly and ruins nice code as well
454 as creates a lot of useless work.
456 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
457 mt. This fixes bug #1116.
458 kes Add const in python files to reduce compiler warnings.
459 This may have to be backed out because of later compiler
461 kes Fix failure of 2drive-concurrent-test. Always read label;
462 clear_unload() only after drive is defined in acquire_for_read().
464 kes Generally clean up the manual tape loading code. The main
465 conceptual change is that when a volume is marked to be unloaded,
466 its volume name is retained, and it is only marked as unloaded
467 when either the autoloader says it is unloaded or another tape
468 is read on that drive.
470 kes Add debug code and refactor subroutine in stored/mount.c
471 kes Fix format problem in bscan output reported in bug #1105.
472 ebl Fix get_next_volume_for_append logic with autochanger
473 - use pruned volumes if found
474 - don't reset the inchanger flag after getting a recycled volume
476 Fix recycle_oldest_purged_volume to take InChanger flag in account
478 ebl Add mmap/unmmap implementation for tokyodbm under win32
480 kes Make first step toward eliminating globals from config
481 scanning. Also should be a workaround for FORTIFY_SOURCE
482 GNU C bug -- fixes bug #1042.
484 kes Apply duplicate job tests to restarted jobs.
485 kes Copy more data when restarting a job so that run
486 overrides are kept. This should fix bug #1094.
488 kes More word alignment cleanup.
489 kes Fix bug where SD did not ask operator if the device could not
490 be opened. Reported by Eric.
492 kes Add dbuser to DIR conf file (replaces user).
493 kes Add --with-db-password to ./configure
494 kes Fix regress to handle db_password.
495 ebl Add new 'status storage slots' that list autochanger
497 ebl Update vtape driver to compile only under Linux.
498 ebl Fix a bug when restoring with a wrong mediatype.
500 kes Eliminate ints from conf files and structures to avoid
501 word alignment problems
503 kes Fix bug reported by Scott Barninger where the bacula script
504 refers to scripts in the wrong directory. Needed to meet the
505 requirements of recent FHS location changes.
506 ebl Disable vtape for FreeBSD.
508 ebl Modify disk-changer to check if slot contains something before
511 ebl Fix vtape on win32 and debian.
512 ebl Fix autoselect patch (cause segfault).
514 ebl Fix autoselect option broken for a while. Fix #1089. Need some
515 work with StorageId to be able to use a particular drive in a
518 ebl Rename vtape to vtape.
519 ebl Update vtape driver.
521 ebl Modify vtape driver to avoid sparse file.
522 kes Add make clean of qt-source directory during ./configure
523 kes Store last block number written to tape in DEVICE and
524 use it for testing for correct last block on EOT.
526 Release Version 2.4.0:
530 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
531 This fixes bug #1095.
533 kes Add create_postgresql_database.sql to Win32 installer. Should
534 fix problem reported by Juilio Monteiro.
535 kes Get correct slot when auto unloading a device. This fixes bug
538 kes Fix multiple media restore.
539 kes Make DEVICE Slot private and access it via a method.
540 Allows better control over when it is set and cleared.
541 kes Fix possible seg fault if SQL error.
543 kes Add Martin's fixes to argument scanning for the estimate
544 command. This fixes bug #1093.
545 kes Add debug code to SD.
546 kes Fix renaming a Volume, which used the wrong Volume name.
548 kes If operator has rewind tape, print warning, release tape and
549 try once more. If tape is positioned somewhere, something went
550 wrong, so mark the tape in error and try once more. Previously
551 this error was fatal, now it produces an error message.
552 kes Ensure correct volume name displayed during restore
553 kes Ensure that Volume is mounted for restore.
555 kes Fix a few more Coverity reported problems.
557 kes Apply Allan Black's status dir job count patch.
558 ebl Add information about IMPORT/EXPORT slots in mtx-script.
559 kes Enhance a couple of SD debug messages.
560 kes Tweak unload flag setting and ensure it is set during swap.
562 ebl Fix #1091 about bad output in estimate command.
564 kes Modify autochanger locking to attempt to avoid race
566 kes Make sure device not busy before doing label command.
567 kes Display open() errors except when polling. Previously too
568 many were suppressed. This should fix bug #1070.
569 kes Fix Win32 reparse points. Bacula will not recurse into any
570 reparse point directory, including mount points, unless the
571 directory is explicitly mentioned at the top level (same as
572 with Unix). A file that is linked to another file will be
573 backed up -- much as Unix does for hardlinked files.
574 This fixes bug #1041.
576 kes Remove double quotes from ChangeLog and ReleaseNotes
577 kes Remove StorageId test when pruning and recycling (Eric's changes).
578 kes Remove old form of locking when getting volumes -- causes deadlock.
579 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
580 the name unique and to eliminate compile time error.
581 kes Add accurate.o to Win32 FD Makefile
583 kes Fix cats dll build on Win32 after db_update_job_end_record
584 calling sequence change.
585 ebl Switch to tokyo dbm instead of htable in accurate code
586 ebl Include tokyo dbm to bacula source tree
588 kes Fix buffer overruns detected by Coverity.
590 kes Tweak joblog display.
592 kes Implement --without-qwt
593 kes Fix layout of restore tree dialog
594 kes Add configure bat QWT libraries, so that bat can be built
595 with or without the QWT libaries.
597 ebl Add dummy tape driver for regression tests.
598 kes Make sure we unload the right slot when swapping.
600 kes Add debug times, reduce size of two-pool-changer test
602 ebl Tweak autoconf scripts for vtape
604 kes Improve SD reserve debug code.
605 kes Testing an improvement to free up volumes no longer in use.
607 kes Rework SD acquire for read to handle autochanger Volume
609 kes Implement regression that explicitly tests swapping a Volume
610 from one drive to another.
611 kes Enhance disk-changer to detect most error conditions.
612 kes Fix SD code so that it properly swaps a Volume between drives.
613 This fixes bug #1083.
615 kes Apply libdbi patch from Joao Freitas for regress and for
616 Bacula trunk. Regress now works with libdbi. Nice.
617 kes Apply .nobackup patch from bug #1077 submitted by
619 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
620 name into jobs cloned via the run directive.
622 kes Prevent a Volume that is being swapped from being freed from
623 the volume list. This will most likely fix, at least partially,
625 kes Fix strippath so that it does not get a buffer overrun and crash FD.
626 This fixes bug #1078.
627 kes Remove 50 millisec wait in SD that broke debugger.
628 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
629 that a job may run, counted from when the job was scheduled.
630 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
631 a job may block waiting for a resource, counted from when the job starts
632 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
633 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
634 that implements multiple commands per line in the console when using
635 readline. Modify the default to use a semicolon as the command separator.
637 ebl Fix SQL query in migration code.
638 ebl Make accurate mode with hash disk pass regression tests
640 ebl Implement first cut of accurate backup with hash disk.
642 kes Force unload of volume when wrong volume mounted in SD.
644 kes Fix bat seg fault at termination.
645 kes Add Bacula generated version to bat about box.
648 kes Experiment with allowing multiple read jobs.
649 kes Move final volume swapping code to DCR method and
650 call it from acquire_for_read().
651 kes When wrong volume is mounted during read, unload_autochanger.
653 kes Integrate the libdbi changes from Joao Henrique Freitas
655 kes Stop searching for Volumes in SD askdir if DIR returns the
656 same volume name twice in a row.
657 kes Close bat console windows first to eliminate error message
660 kes Tweak the swap Volume from one drive to another code so that
661 it now seems to work.
662 kes Resolve several problems with recycling that broke the new
663 code (these problems are in 2.2.9 as well).
664 kes Remove the volume lock when calling the sysop code.
665 kes Don't mark a reserved volume with no writers as unused otherwise
668 kes Rework class structures for VOLRES, DCR, and DEVICE to make
669 the method names a bit more logical, and for more logically
670 handling the responsibilities.
672 kes Remove redundant code in terminating the scheduler that just
673 causes a seg fault in many cases.
674 kes Cleanup releasing a volume and make it a DCR method.
675 kes Improve algorithm for detecting pre-reserved volume and
678 kes Tweak volume swapping code so it works.
679 kes Correct name overloading in mount.c
680 kes Replace released flag in VOLRES with reserved and add access
681 methods for the VOLRES class.
682 kes Prevent volume from being released while being swapped.
683 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
684 plugin that add %w (where) and %r (replace flag) editing to
686 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
688 kes Refactor parts of stored/mount.c
690 ebl Add sanity checks for VolWriteTime and VolReadTime
691 ebl Take care of bad clock changes while computing VolWriteTime
692 and VolReadTime. This should fix or limit #1066
693 kes Correct error string numbers in dird/catreq.c
694 kes Restructure reserving, acquiring, and mounting volumes. Calls to
695 autochanger are deferred for mount.c -- simplifes the code.
697 kes Do not prune any running job. It just fails the job.
698 kes Lock the volumes when changing dev->reserved_device and marking
699 the volume unused otherwise the device can get reserved by
700 another job before the volume is released, thus blocking it.
702 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
703 kes Fix bug #1063, reuse of freed ptr in list nextvol.
704 kes Release regex compile buffer in filed/job.c
705 kes Add proper type of const char in sql_create.c
706 kes Turn off debug in daemon termination routines
707 kes Move free_volume_list() before devices are freed in stored.c
708 kes Fix reference to uninitalized stack variables in bregex.c.
709 This should correct bug #1067.
711 kes Fix possible seg fault in SD when freeing a volume entry.
713 kes Implement unload_dev() before swap device.
714 ebl Add statistics prunning with option and menu
715 kes Separate unload_dev() from unload_other_device() in autochanger.c
717 kes Apply patch from bug #1069 that corrects spurious error messages
718 when ACLs enabled on SGI but no ACL exists.
719 ebl Fix small segfault in bacula-sd when debug level is 500
720 kes Modify run_program() and run_program_full_output() to use
721 call by reference for the results string. This corrects a long
722 standing problem where the address of the string may be changed
723 in the subroutine but not in the calling program.
725 kes Re-enable code to remember last volume mounted on a non-tape
727 kes Add patch supplied in bug #1068 that fixes a SD crash when using
728 a Virtual autochanger.
729 kes Generate correct JobMedia records during spooling/despooling when
730 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
731 <tih@hamartun.priv.no> for excellent analysis and testing.
733 kes Tweak hash algorithm for htable using Martin Simmons idea
734 for doing a circular shift.
735 kes Remember what volume is in VTLs (previously turned off for
737 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
738 pointed out some problems in creating JobMedia records during
739 spooling with concurrent jobs. Fix the problem by updating the
740 start file position before despooling and generate a jobmedia
741 record at the end of despooling.
743 kes Fix handling of JobMedia records during spooling and when a
744 Volume is changed without actually writing data to the Volume.
746 kes Rework certain SD locking based on gdb tracebacks of deadlocks
747 sent by Eric. This code now uses only the volume_lock() rather
748 than the reservations lock when at EOM and acquiring a new
750 kes Ensure only one exit point in several subroutines.
752 kes Implement bsock code to permit locking. Use the new code in Verify
753 in the FD to prevent the heartbeat thread from disrupting the Verify
754 data sent to the Dir.
755 kes Modify SD locking to eliminate locking the reservations system from
756 outside the system. Use the volume lock when getting media data
757 and reserving a new volume at end of media.
758 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
759 when SD starts are not locked into place.
761 kes Fix error compiling runscript code on 64 bit machines.
762 kes Tweak Win32 mount point code.
763 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
764 cleared giving bad file estimate).
765 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
768 kes Keep Schedule run lists in order as suggested by
771 kes Implement autostart scripts for Debian.
772 ebl Implement upgrade catalog scripts.
774 ebl Apply jobstat patch for long term statistics. Have to implement
775 purge stats command and upgrade scripts.
776 kes Fix mtx-changer.in for broken Debian mt program.
778 kes Fix large number of JobMedia records reported by Eric Bollengier.
780 kes Apply doc fix from bug #1062.
781 kes Resolve crash and improper restore wx-console Win32 restore
782 GUI. Fixes bug #1065.
783 kes Update Win32 wxWidgets to latest version.
784 kes Attempt to do correct handling of Win32 mount points. Should
786 kes Fix Win32 FD backup/restore memory leak due to improper termination
787 of BackupRead/Write. This fixes bug# 1038.
789 ebl Reduce memory usage for accurate backup, working only with ctime
790 and mtime. (not all Lstat field)
791 About 40MB for my Linux system (400.000 files)
793 kes Add dcr->reserved_volume flag that allows us to release a volume
794 even if it is not vol->released. This allows maxvol2 to work when
795 Volumes expire and we are already writing to the device (i.e. a
796 volume is pulled out from under us by another job terminating after
797 we reserve the drive).
799 ebl Permit multiple command/console per runscript definition.
800 RunScript { command = /bin/true ; command = /bin/false ... }
801 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
802 (restart an application) just after the VSS snapshot on windows.
803 kes Don't zap dcr values during release_volume() as they might
804 have the next Volume to be mounted.
805 kes Fix AIX prototype.
807 kes Second cut of drive switching during backup.
810 kes Update Win32 version of wxWidgets to most recent version.
811 kes Tweak Copy job details.
812 kes Rework dir_find_next_appendable_volume to make a bit more effort
813 to find a suitable volume before giving up.
815 kes Make ask_sysop_to_create... to return if waken from wait.
816 This helps get out of blocked conditions.
817 kes Experimental implementation of switch_device in reservations.
818 kes Implement FD version to allow easier protocol changes.
819 kes Add Plugin Options string -- not yet passed to FD.
820 kes Implement PluginOptions ACL.
822 kes Attempt to correct problems with restores with autochangers and
823 use counts going negative
824 kes Rework SD status command and implement API for bat. Implements
825 header, runing waitreservation, devices, volumes, spooling,
826 and terminated status keywords.
827 .status storage=xxx <keyword>
828 kes Clarify TLS error message by adding double quotes around name.
829 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
830 kes Pass jcr to tls routines so debug messages can be handled better.
831 kes Rework jobq resource allocation code, and possibly fix a bug
832 that caused reference counts to get out of sync.
834 kes Rename fd/dir plugin to use Bacula standard underscore.
835 kes Plugin work -- bring dir up to fd level.
836 kes Start implementation of VTL code
837 kes Fix Win32 build after adding new cats subroutine.
839 kes First cut at Duplicate Job implementation.
841 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
842 kes Start PluginOptions string, and refactor a bit of ua_run.c
843 ebl Apply Allan patch that permit to reset recyclepool.
845 kes Test patch -- possible fix or improvement for bug #1053
846 kes Refactor FD and SD status commands to permit new API code in
847 SD, and to fix Win32 build.
848 kes Win32 build is now working.
850 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
851 some ideas in patch from Scott Bailey.
852 kes Begin implementation of duplicate Job control.
853 kes Fix some of Win32 build after recent additions.
854 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
855 which causes the FD to detect whether or not the OS has the
856 honor no dump bit (*BSD systems), and if so, to skip backing up
857 any file with this bit set. The feature is enabled by setting
858 'honor no dump flag = yes' in the Options section of a FileSet.
860 kes Correct po warning message with datarootdir
861 kes Implement more code in dird.c to put configuration parsing in
862 a class rather than use globals.
863 kes Restructure SD status command for implementation of bat API
866 kes Suppress incorrect 'Will not descend from x into y' messages.
867 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
868 daemon globals used by parser.
869 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
871 kes Fix free of plugin_list when none exists.
873 ebl Apply accurate project patch.
875 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
876 on non-mempool object)
877 kes First cut of converting FD .status to work with bat API.
879 .status client=XXX header
880 .status client=XXX running
881 .status client=XXX terminated
882 kes Implement first cut of Copy Job.
883 kes Implement Catalog in Pool resource. It overrides catalog specified
884 in the Client resource.
886 kes Apply patch (with some difficulties) from Joao Henrique Freitas
887 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
889 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
890 ftruncate() actually works. In the case of some (cheap) NAS devices,
891 it does not, and so recycling NAS Volumes does not work. The code
892 simply unlink()s the file, then recreates it. This fixes bug #1011.
894 kes First incomplete cut of big malloc blocks for htable.
895 kes Tweak plugin code.
897 kes Plugin debug code + tweak a couple bat dialog layouts
899 kes Fix creating first JobMedia record during Migration to include
900 proper index. This caused slow restores of migrated jobs.
901 kes Temp fix to plugin name file_index.
902 kes Bacula backed up and restored a MySQL database.
904 kes Implement plugin restore.
905 kes Implement parsing of db_driver to give db_type index.
907 kes First cut of plugin restore code.
908 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
909 and do not strip paths on symbolic links.
910 kes Set catalog backup database and user name from values specified on
911 the ./configure line.
912 ebl Fix #1031 about wrong pool source information in job report.
915 kes Remove a redundant jcr argument to find_files, match_files, and
917 kes Implement '.status dir header|scheduled|running|terminated' that
918 prints the requested status section. With the exception of the
919 header, the other reports have fields separated by tabs (\t).
921 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
922 a resource embedded run command to find a since time if no explicit
923 since time was supplied on the command line.
924 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
925 that updates the state file at job termination time in addition to
926 when the daemon terminates.
928 kes First version where a plugin did a backup.
929 bpipe-fd.so created a backup file, wrote a test
930 string to it, and Bacua could restore this fabricated file.
932 kes Implement DB Driver = string for the DBI driver.
933 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
934 kes First cut of code for loading Win32 plugin dlls. Implement
935 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
936 and implement a dlfcn.h file based on opengroup's definitions of
939 kes First cut plugin directives.
941 kes Apply patch from bug #1049 to prevent stripping the path on a
943 kes Attempt to fix bug #1047 where stripping a path corrupts the
944 heap. Waiting for feedback.
945 kes Correct the Mount message not to suggest labeling a new tape
946 when doing a restore. Submitted by email by John Stoffel.
947 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
948 FD by using casting. Reported in bug #1042.
950 kes A bit of crypto cleanup. More later.
952 Release Version 2.2.8
954 kes Apply patch from Martin to correct bug #1040, bscan sets existing
956 kes Fixed important spelling error in doc -- bug #1045.
958 ebl Fix bextract to be able to extract non-portable Win32 data to
960 kes Move initialization of read/write res lock earlier in the code.
961 This fixes the crash with a null conf file. This fixes bug
963 kes Redefine CURES in lib/parse_conf to be URES and move it all
964 into lib/parse_conf.c -- this responds to bug #1042, but does
965 not fix it. The fix is not to compile with FORTIFY_SOURCE.
966 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
967 the trunk SVN. I don't think this was reported as a bug.
969 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
971 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
973 kes Add DataDespooling and DataCommitting status (committing is
974 the last despooling).
975 kes Finish implementation of new reservations code noted below.
977 kes Fix bsnprintf for float point numbers. I broke recently when
978 parameterizing some variables. This fixes bug #1036.
979 kes Undo recent reservations changes ... will apply them later
980 when they work better.
982 ebl Fixes #1034 which cause mysql to hang the connection after 8h
983 ebl Change default statistics target of filename.name and path.path
984 fields for PostgreSQL. This speeds lookup by indexes. Thanks
986 kes A few more tweaks to new reservation code. Make sure to clear
987 vol released flag when retaking volume. When reading label and
988 label is bad mark volume unused. When recycling, mark volume
989 unused so it can be renamed.
991 kes Fix reserve_volume() so it doesn't release a volume in use
992 (i.e. a volume entry not marked released). This should be
993 the last part needed to fix bug #1018.
995 kes Move Heartbeat documentation from Job to Director resource.
996 This fixes bug #1033.
998 kes Fix existing switch drive SD code to call autochanger to release
999 any old volume. This must be done to keep the autochanger from
1000 releasing subsequently newly reserved volumes in doing a close().
1001 This should fix bug #1018.
1002 kes Fail if attempting to get console input in batch mode. This
1003 should help fail RunScript console commands that are incomplete.
1004 kes First cut implementing switch_drive() in SD (not actually called).
1006 kes Implement first cut running console commands in a RunScript.
1008 ebl Fixes bug #1028 where 'Selection Type' option was not usable
1010 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
1013 Release Version 2.2.7
1015 kes Add new free_tls() entry point so that Win32 builds.
1016 kes Fix compile warning in src/lib/util.c
1017 kes Fix entry point for edit_job_codes() so that Win32 builds.
1018 kes Fix seg fault Frank Sweetser reports in regression testing
1019 on his systems. The problem was that the original author of
1020 bsnprintf.c did not take into account the side effects of
1021 using ++x in the argument to a #define.
1022 kes Make SD protocol backward compatible with version 2.2.x.
1024 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
1025 because Bacula no longer restores sockets.
1026 ebl Always use ignorecase fileset option on win32 FD.
1028 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
1029 that implements double quoting include names in conf files,
1030 and also allows piping input by having the first character
1031 be a vertical bar (|).
1032 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
1033 that implement %f in RunScripts to pass the FileSet name.
1034 kes Skip leading | when lex input comes from a pipe as suggested
1035 by Michael Stapelberg <michael@stapelberg.de>.
1037 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
1038 Nerijus Baliunas <nerijus@users.sourceforge.net>
1040 kes Implement Plugin Directory and plugin events.
1042 kes Implement a security enhancement: TLS authentication but no
1043 encryption. Enabled by setting 'TLS Authentication = yes'.
1044 Note when this is on, TLS encryption is turned OFF!
1046 kes This patch corrects a problem where the maximum concurrent storage
1047 jobs counter gets out of sync during restore jobs causing jobs to
1048 'wait on max Storage jobs'. This patch fixes bug #1009.
1050 kes This patch fixes bcopy so that it produces correct Volumes.
1052 kes This patch eliminates spurious output to the console during a VerifyVolume
1053 job that contains encrypted data. It fixes bug #1024.
1055 kes This patch prevents the 'status dir' command from trying to use a scratch
1056 volume and possibly moving it from one pool to another. This patch fixes
1059 kes Add new include to postgresql.c suggested by Marc Cousins so
1060 that it compiles correctly with pgre version 8.3.
1062 kes Fix --archivedir addition to configure. Replace it with
1063 --with-archivedir in configure.in This fixes the regression
1065 kes This patch fixes bug #1012 where the job is canceled because
1066 of Max Run Time exceeded when the job has not yet started.
1068 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
1069 one 'part' to write. Instead of each part being stored on disk,
1070 written to DVD, then deleted from disk, all parts are written to disk,
1071 and only the last is written and deleted from disk.
1072 kes This patch fixes the status command to include the formating string for
1073 JS_AttrInsterting. It fixes bug #1021.
1074 kes This patch should fix the Mac OS X build problem on the latest
1075 Darwin, where sys/types.h was not included correctly (apparently
1076 due to a change in the Mac headers). The solution was to explicitly
1077 ensure that it is defined for the ./configure.
1078 This patch also has a rebuild of configure that includes the Debian
1079 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
1080 kes This patch should ensure that queued messages to the console are
1081 displayed as soon as possible. It should fix bug 1007, but has been
1082 reported not to work.
1084 kes This patch fixes the infinite loop when trying to increase the
1085 maximum number of volumes in a Pool during the add command.
1086 This patch fixes bug #1008.
1088 Release Version 2.2.6
1090 db Remove extra data on estimate command in joblist for bat.
1092 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1093 really change anything, but is the beginning of doing it *right*.
1094 To do it completely right the LastWritten date must be passed to
1095 the SD, but it is not yet done.
1096 kes Minor tweaks to some bat restore SQL.
1097 kes This patch fixes bug #1003 where putting the message output from
1098 a Verify job into the catalog results in a recursive loop. The problem
1099 seems to show up only with postgresql (to be verified).
1100 kes Correct %x to %p in postgresql debug statement.
1102 kes Fix bug #942 where lots of emails where generated when the heartbeat
1103 interval was low and Bacula wanted a different tape from the one in
1106 ebl Add new SD despooling attributes and Dir inserting attributes
1107 job status codes in the catalog (Status table).
1109 ebl Use qmake-qt4 instead of qmake when available (debian system).
1111 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1112 that passing the password via the command line (arg 3) is insecure.
1113 This responds to bug #990 (it doesn't fix it).
1115 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1116 kes Fix a crash in bat when it cannot connect to the Director for example
1117 if the Director is not running.
1118 kes Remove redundant INDEX (JobId) from File table in the trunk.
1119 This fixes bug #992.
1120 kes Make explicit exception to GPL in LICENSE to permit linking
1121 the Win32 FD with Microsoft VSS code.
1122 kes Apply the Solaris package patch from
1123 Masopust, Christian <christian.masopust@siemens.com>
1124 kes Apply the patch to optionally add a timestamp in the debug output
1125 submitted by Mariusz Czulada <manieq@wp.eu>.
1127 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1128 backend (sql_strerror). Fixes bug #989
1130 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1131 It applied with no problems.
1132 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1133 awk are on the path.
1134 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1135 since the status is returned on stderr on Solaris.
1136 kes Activate Close button on tray-monitor window. This fixes
1138 kes Check for NULL item in parse_conf.c before calling it. In the
1139 case of Device, there is no item and this caused a seg fault when
1140 Device appears in the conf file.
1141 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1142 avoids pulling in config.h multiple times in some new code.
1144 kes Fix spurious warning message printed when creating a volume with
1145 a LabelFormat. This fixes bug #976.
1147 Release Version 2.2.5
1149 kes Add JobId in place of Job name in all the Jmsg() output.
1150 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1152 kes Make maxvol-test and new more strict maxvol2-test work.
1153 kes Print JobId in all Jmsg() job output.
1155 kes Add new SD despooling attributes and Dir inserting attributes
1156 job status codes. This fixes bug 961.
1157 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1159 kes Fix doc issue. This fixes bug #963.
1160 kes Fix listing performance problems in bat. Pointed out by
1162 kes Remove old debug code.
1163 kes Fix bat code that tests for Win32. This should fix bug #968
1164 kes Query 5 list wrong Vol after migration. This fixes bug #960
1166 ebl Fix #969 where user can't change Replace option in restore menu.
1168 kes Save jcr in thread specific data (tsd) for each thread.
1169 kes Make Dmsg() print JobId as -%u.
1170 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1171 for the thread if it exists.
1172 kes Remove old reservation debug jid code.
1173 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1174 ebl Add an option that permit to specify spool size in job
1175 definition. (Applying patches/testing/spoolsize_per_job.patch).
1176 You must upgrade SD and DIR at the same time.
1177 dvl Add new configuration item --archivedir
1178 dvl Adjust regression tests to use tmp not /tmp. This will allow
1179 multiple concurrent runs of the regression tests.
1181 kes Fix race condition that drops final block written to volume.
1182 This happens in rare cases with multiple simultaneous jobs
1183 when the Volume fills. This fixes bug #964. May be related
1184 to bug #935 and possibly #903.
1185 kes Eliminate more strerror() and replace with bstrerror().
1186 kes Remove BSD getopt and replace with unrestricted IBM version.
1187 kes Fix Win32 build for changed calling sequences.
1188 kes More tweaks to the mount volume routines to get everything
1189 right. Changed variable name from find to have_vol, which is
1190 much easier to understand.
1191 kes Enhance btimer debug code.
1193 kes Fix FD->SD authorization failure, which was due to spurious
1194 wakeups from a pthread_cond_timedwait(). Simply check the
1195 predicate before continuing. This fixes bug #953.
1196 kes Add const char where needed (more to do). Remove temp debug code.
1198 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1199 kes Don't overwrite error message in check_tables_version.
1201 kes Unlock batch insert tables with same calls used elsewhere.
1202 kes Allow starting 59 jobs a second.
1203 kes Make SD session key more random.
1204 kes Add retry for SQLite opening db if it fails. Probably helps
1206 kes Suppress extra error messages during batch insert failure.
1208 kes Add jcr to timer packets so if killed message can be sent to job.
1209 kes Add JobId to all Dmsg() output.
1210 kes Put some FD auth code on dbglvl rather than fixed.
1211 kes Return insert attributes error message in db msg buffer to avoid
1212 false error messages. Helps fix bug #966.
1213 kes Separate batch init error messages. Probably helps fix bug #966.
1214 kes Make SD code that contructs attribute insert check string lengths
1216 kes If Dir gets an error during inserting attributes, cancel SD.
1217 This reduces unnecessary error messages.
1219 kes Correct search boolean for getting Volume info
1220 ebl Cleanup batch insert code. Probably fixes bug #965.
1221 kes Back out one small change to the reservation system (reserving a volume).
1222 kes Rework how a Volume is mounted. It is now much more intelligent and
1223 will always attempt to use any mounted volume if possible and reduces
1224 calls to the Director asking about volumes.
1226 kes Turn off some code when batch insert not enabled.
1227 kes Edit FD name in connect error messages.
1228 kes Rework the reservation system to take into account that the Director
1229 might give us a Volume that is different from the current one being
1230 used, and to ensure that we don't exceed Maximum Volume Jobs.
1231 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1232 fatal error with multiple jobs running'
1233 kes Add more debug code in reservation system.
1234 kes Implement maxvol-test to check bug #947.
1236 kes Add code to handle tray monitor separated from Win32 FD.
1237 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1239 kes Add missed return in fixing verify bug -- trunk only.
1240 ebl Fix a command parser issue causing a director segfault.
1241 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1242 This fixes bug #954.
1243 kes Increase the max block size to 4MB fixes bug #957.
1244 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1245 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1246 is not properly mounted (recognized) during a poll.
1247 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1248 Job that has differences reports Verify OK.
1249 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1251 ebl Add an option to operate on all pools with update vol parameters.
1252 This complete the project 20. Patch from Nigel Stepp.
1253 ebl Add history support to bconsole when using readline.
1254 Using Ctrl-D to exit doesn't update .bconsole_history
1255 kes Modify new volume algorithm to use max MediaId for generating next
1256 volume number rather than the count of Volumes. This should essentially
1257 eliminate the failure rate if some volumes were deleted. Bug #921.
1258 kes Begin implemention of Optimize Job Scheduling.
1259 kes Implement restore callback that Dirk and I agreed on for bat
1260 restore. This fixes bug #928. Restore of backup of zero files fails.
1261 kes Fix SQL Catalog logging which broke with new db_escape_string
1264 Release Version 2.2.4
1266 kes Fix bacula_cats.def for new db_escape_string().
1267 kes Increase size of name string when FD making connection to SD.
1268 May fix bug #953. FD->SD connection failure.
1270 kes Add code to help Dan debug 2drive-incremental-2disk test.
1271 kes Add code to try to fix bug #908.
1272 kes Add waits to multiple exit detection code to try to force pid
1273 file to always be deleted.
1274 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1275 This fixes bug #950.
1276 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1277 trying to switch drives by checking for blocking before unblocking.
1279 kes Cancel storage daemon in all cases where FD reports error. This
1280 should fix virtually all cases of bug #920.
1281 kes Fix db_escape_string() for MySQL which did not compile.
1283 kes Fix error message that was clobbered when Dir tells SD it does not
1284 have write permission on Volume. This should fix a minor point
1285 in bug #942, but not the main problem.
1286 kes Add code to cancel job in SD if FD connection fails. This should
1288 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1289 dvl Pass jcr and db into db_escape_string() to enable better escaping
1291 kes Fix migration code to get correct Volume name with multiple volumes
1292 by skipping |. Fixes bug #936.
1293 kes Implement patch supplied by Landon to fix bug #944 where using
1294 TLS with bconsole uses 99+% of the CPU.
1295 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1297 kes Move patches into patches directory.
1299 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1302 ebl Using 'm' in bconsole will show messages like before,
1303 and not memory usage.
1304 kes Fix bug #935, and probably also bug #903 where files were not
1305 restored. MediaId was not properly set in JobMedia record after
1308 kes Suppress chown and chmod error messages if the FD is not running
1311 kes Apply Martin Simmons' patch that should turn off the new API usage
1312 when batch insert is turned off allowing building on older
1314 kes Add ./configure search in qwt-qt4 for qwt package
1316 kes Bacula is now free of 3rd party GPL copyrighted code!
1317 kes Remove idcache.c
1318 kes Add guid_to_name.c/h which replace idcache.
1319 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1321 ebl Detect if new PosgreSQL batch insert API is present.
1322 kes Correct incorrect mempool call causing Director crash. Occurs on
1323 systems without va_copy().
1324 sb Update spec files for 2.2.1 release
1326 kes Fix memory pool call in ua_output.c. bug #934.
1327 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1328 Add test program to fnmatch.c
1330 kes Integrate patch to README.vc8 from
1331 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1332 edit it to get it into Unix patch format.
1333 kes Implement mkpath.c to replace old FSF makepath.c
1335 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1337 Release Version 2.2.1
1339 kes Update POTFILES.in
1340 kes Cleanup a few underquoted AC_DEFUNs in configure
1341 kes Apply patch from Martin Simmons that adds a test for va_copy to
1344 kes Fix bug #921 by increasing the number of tries to create a new volume
1346 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1347 can be called multiple times. Implement a version for machines
1348 without va_copy() that gets a big buffer.
1350 kes Integrate more portable zone offset code into bsmtp.c
1351 Submitted by Attila Fülöp.
1353 kes Fix bad SD->FD return status reported by
1354 (James Harper) <james.harper@bendigoit.com.au>
1355 ebl Fix a bug in read_close_session which return random status
1356 thanks to James Harper
1358 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1359 and directory names during restore of single file/directories.
1360 kes Add sanity checks to .sql command when string is empty. Hopefully
1361 that will resolve Dirks Director crash.
1363 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1364 in the bsmtp chat subroutine when debug is >= 10.
1366 kes Fix Director crash when running bat SQL queries.
1367 kes Add David's notes on Item 8: Copy pools.
1369 kes Rework projects file to be current and ready for a vote.
1370 kes Enhance lex scanner error message.
1372 kes Tweak LICENSE file to mention BSD code.
1373 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1374 if specified on the ./configure.
1375 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1376 This class is intended to allow us to open a second bsock to the
1377 Director while in the restore subdialog.
1379 kes Fix configure to create bat Makefile before creating dependencies.
1380 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1381 kes Add a tooltip to the tray monitor.
1382 dvl Set the Director's PID file before dropping privs. This fixes
1385 kes Update AUTHORs file
1386 kes Increase the default max concurrent jobs to 20 in FD and SD to
1387 correspond with the default .conf files.
1388 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1389 some different, of the same file created by RN when porting the
1391 kes Rearrange some of the Win32 directories and the placement of the files
1393 kes Set DEVELOPER flag in version.h
1395 ========================================================================
1396 Release Version 2.2.0
1398 kes Apply a second doc patch from Marc.
1399 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1400 improves the tips section that discusses how to setup multiple
1403 kes Update bat README file.
1404 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1405 corrects a typo in the Recycle status check in db_find_next_volume().
1406 This will probably fix a number of annoying problems with multiple
1408 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1409 bnet calls -- no functionality change.
1411 kes Modify the Verify output to specify if files are missing on
1412 the Volume(s) or disk. Fixes confusion in bug #916.
1413 kes When more than one Volume is read in a migration job, the last
1414 Volume bytes reported are from the last read volume rather than
1415 the last written volume. Fixed. This fixes bug #910.
1416 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1417 It previously printed New Recyle flag is: no. This fixes bug
1420 kes Correct seg fault when switching tape drives during restore.
1421 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1422 be used until after 2.2.0 release.
1424 kes Remove fnmatch() in SD that permitted wild card specifications.
1425 This fixes bug #914.
1427 kes Fix %g in filename returned by SQL for browse tree reported by
1429 kes Fix configure so that it puts config.out in the cwd rather than
1431 kes Attempt to fix the locking problem reported by Eric in bug #906.
1432 kes Make berrno class to leave errno unchanged after constructor call.
1433 kes Make bnet_server use the heap rather than the stack to allocate
1434 its socket fd pointers to avoid a crash at termination. Problem
1435 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1437 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1438 and putting it in depkgs-qt along with Qt4.3.
1440 kes Rework code in acquire.c that switches drives for reading when
1441 the Media Type does not match. This should fix bug #906
1443 ebl Fix a director segfault during job setup #907
1444 kes Correct seg fault in postgresql when first operation returns no
1445 rows. Fixes Dirks File browser problem seg fault with bat.
1447 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1448 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1451 kes Implement PopUp YES/NO dialog for bat.
1453 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1455 kes Correct RunScript to terminate job in FD on failure.
1456 kes Change abort_on_error and AbortJobOnError to fail_on_error
1457 and FailJobOnError in RunScripts.
1458 kes Minor tweaks of code formating in RunScripts, principally to
1459 avoid depassing 80 columns.
1461 kes Eliminate one #ifdef Win32 in bsmtp
1462 kes Implement grow tool to grow a file for testing very large databases.
1463 kes Add big-vol-test to test Bacula seeking with > 5GB.
1466 kes Modify find_next_volume() to return all values in Media record.
1467 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1471 kes Update Release notes
1473 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1474 Warning, in previous beta version, all media get from scratch keep their
1477 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1478 This should fix bug #842. Made a note to look at removing the temp
1479 files at the end of the install.
1480 kes Add ability to mount and unmount a file device providing it is
1481 marked as being removable and has the appropriate mount and unmount
1482 commands defined in the Device resource. This fixes bug #830.
1483 kes When applying a storage override, release all previous storage
1484 definitions rather than just prepending the new storage.
1485 This should prevent a good deal of confusion.
1487 kes Implement ./configure search for qwt libraries.
1489 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1490 Win32 FD. This should fix bug #893.
1491 kes Remove an unnecessary beep in Win32 init code.
1492 kes Update copyright dates in Win32 executable about boxes.
1493 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1494 code with a BSD getopt.c and getopt.h.
1495 kes Remove sched.h from the Win32 compat directory -- not used.
1496 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1497 need to shut it down, do it through the services panel or the command
1499 kes Remove some inappropriate Bacula FSFE copyrights.
1500 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1501 kes Fix regress config non-portable test as pointed out by
1502 Florian Heigl <florian.heigl@gmail.com>
1503 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1504 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1506 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1507 Reported by Frank Sweetser.
1511 kes Fix client-only build.
1512 kes Integrate client-only fixes for bsys (initgroups) and conio from
1513 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1514 kes Make arguments to get_scratch_volume() in same order as other
1516 kes Rework the prune_volumes() subroutine so that after purging and
1517 no volume found in desired pool, it will check for a scratch
1518 volume. This prevents recycling the whole scratch pool.
1519 kes Add code to status storage to print boffset_t (largefile support).
1521 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1522 kes You now need a --with-qwt=<dir> to be able to build bat.
1523 kes Update src/win32/cats/bacula_cats.def to include the new
1524 db_get_query_dbids() call on Win32.
1526 kes Correct a problem when selecting a scratch volume and moving
1527 it to another pool that lost some columns.
1528 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1529 kes Enhance Autochanger error messages to include Volume and device name.
1530 kes Rework prune_volumes() code to take account of InChanger flag,
1531 and to handle recycling volumes going to the Scratch pool and
1532 current pool because the RecyclePool directive.
1533 kes Implement a better and more efficient db_get_query_dbids() to
1534 handle creating and passing back a list of DBIds.
1538 kes Start work on new more efficient DBId subroutine. First use
1539 will be for recycling volume to Scratch inchanger.
1540 kes Increase number of JobIds in pruning from 1000 to 10000.
1541 This to be replaced by above routine.
1542 kes Begin implementation of building Qt4 on Win32.
1543 kes Correct typo in fix I added for bad TLS shutdown.
1544 kes Pull 2.0.3 patches into patches directory.
1545 kes Update Release notes. Include qt-console in line count.
1546 kes Update Projects file.
1548 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1549 bug in migration code where a job that spanned two volumes
1552 kes Implement new BST_DESPOOLING blocked state. Change from locking
1553 during despooling in SD to blocking. This means that other threads
1554 can work with the device structure, in particular the reservations
1555 system while despooling.
1557 kes Fix return in reservation message queue that missed clearing
1558 the jcr lock (implemented 26Jun07 below).
1559 kes Rename a number of dev methods to make locking function names
1561 kes Document locking in lock.c. Move lock structures to new file
1564 kes Move reservations message lock to lock jcr only this
1566 kes Move main SD locking code into lock.c (new file).
1567 kes Update Win32 build to include lock.c
1571 kes Dirk committed the qwt library code for drawing graphs in bat.
1572 kes Tweak install of qwt so that it is integrated with ./configure.
1574 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1575 out by Eric (my typo).
1576 ebl Fix configure.in to get batch mode enable
1577 kes Return correct string from authenticate.cpp in bat when connecting
1579 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1580 spurious line drops when using TLS.
1581 kes Do not file reparse points when restoring a file that already
1584 kes Implement Windows reparse points -- similar to directories, but
1585 we do not descend into it. This is a first cut. They seem to
1586 be backed up, but restore is not yet tested.
1587 kes Remove restore_blocking in tls code when shutting a socket to leave
1588 it in blocking mode. Hopefully this will fix the encryption bug
1589 reported by Frank Sweetser.
1590 kes When opening a file for backup, tell the OS that we are going to
1591 read it sequentially -- optimization.
1592 kes Change variable names in authenticate_director() to not conflict
1593 with member names in bat. Caused great confusion with compiler,
1596 kes Queue openssl error messages in case of comm problem.
1597 kes Do shutdown() call if socket terminated.
1598 kes Remove some duplicated code in tls.c
1599 kes Move more of the bsock member variables into private and access
1601 kes Add Frank Sweetser's tls-test to the regression suite.
1603 kes Add Swedish sv.po file
1605 kes Don't print clock skew message in FD if less than 3 seconds diff.
1606 kes Add a bit of VSS info to status client.
1607 kes Implement a first cut of Vista VSS, using Win2003 code.
1609 Release: 2.1.20 beta
1611 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1612 loaded tape but uses first drive).
1613 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1614 This was indeed a Win32 issue.
1616 kes Simplify search of autochanger for in-use Volume.
1617 kes Fix exit condition of check for in-use volume. kes Remove
1618 inappropriate my_postgresql_free_result() in db_close()
1620 kes Fix bad return in FD when encryption signature not found.
1621 Probably caused a crash.
1622 kes Inhibit missing encryption signature error messages for
1623 file types where no signature computed.
1624 kes Correct inverted check on autochanger in reservation system.
1625 kes Tweak debug code in autochanger reservation.
1627 kes Add some additional locking in the cats directory in subroutines
1628 that modify packet variables called from batch insert.
1629 kes Rework how dcrs are allocated. new_dcr() can now be called
1630 with an existing pointer, and it will simply clean it up.
1631 This allows the reservation system to test various different
1632 devices, and will permit easy device changes.
1633 kes A bunch of changes all over to handle new new_dcr() calling
1635 kes Work more on the Volume management in the SD. Remember Volumes
1636 for tape drives and for autochangers (even virtual disk changers).
1637 kes When looking at the Volume list to reserve a drive, handle
1638 autochanger names correctly by interating through the changer
1639 devices. Also call the Director to see if a Volume is suitable
1640 for the current job.
1641 kes Fix some bugs in bscan. Make sure all media records are written.
1642 Make sure that valid JobMedia records are written for disk files.
1643 Previously they were completely wrong.
1644 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1645 that the URLs don't change and so that the developers will all
1646 work off the same copy. Rebuild from scrach.
1647 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1649 Release: 2.1.18 beta
1651 kes Fix seg fault in FD from incorrect digest size.
1652 kes Fix argument to non-OpenSSL crypto.c subroutine.
1654 Release: 2.1.16 beta
1656 kes Remove a few malloc()s from the encryption code.
1657 kes Use the class calls to bsock in filed/backup.c and restore.c in
1658 place of the old bnet_xxx code.
1659 kes Implement code that does an on the fly calculation of the
1660 signing digest during restore of encrypted files. It makes
1661 a best guess at the algorithm, and if it is not correct, will
1662 then revert to the old code which reads the file after it is
1664 kes Implement at least one missing crypto stream in stream_to_ascii()
1665 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1666 #877 where a reload with bad syntax causes Dir to exit.
1668 Cut: 2.1.14 beta (not released)
1670 kes Do not free a volume on a tape drive until another volume is
1671 mounted and read, or the autochanger unloads the volume.
1672 This should help the SD re-use volumes that are already mounted,
1673 and should fix bug #886.
1674 kes Apply patch from user brettedgar that allows gnome2-console include
1675 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1676 kes Apply patch from Lucien Weller that fixes day of week calculation
1677 because of DST flag problem. Fixes bug #887.
1679 kes Move find_next_appendable_volume() to after acquiring a valid device
1680 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1682 kes Unable to reproduce bug 872. However added additional testing for
1684 kes Bug #874 resolved by documenting SQLite limitations.
1685 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1686 kes Bug #881 resolved by removing typo in mtx-changer script.
1687 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1688 approval. Added a link to the wiki on the web page, and implemented
1689 a backup from http://paramount.ind.wpi.edu
1691 kes Fix update allfrompool to pass pool name.
1693 kes Convert to pure GPL v2 license.
1694 kes Fix sscanf problems reported by Peter Buschman that caused
1695 a bus error on Solaris.
1696 kes Rework (simplify) the select prompt in bat.
1697 kes Move get_jobid_from_tid() into lib and create a
1699 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1700 should definitely fix the problem of lost error messages in the
1702 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1703 kes Eliminate tcpd.h from the project. Enclose the #include from the
1704 library with extern C ...
1705 kes Add print of signal name when a signal is trapped.
1707 Release: 2.1.12 beta
1709 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1711 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1712 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1713 makes SQLit3 run 30 times faster, though a bit less safe.
1714 kes Implement --with-batch-insert in configure and detection of thread
1715 safe libraries. It is on by default, but turned off if no thread
1716 safe library (e.g. SQLite 2) is available.
1718 kes Fix Bacula PostgreSQL buffer overruns.
1719 kes Do better checking for NULL results returned from PostgreSQL;
1720 implement retry for failed queries; clear results buffer after
1721 failed query. Hopefully this will correct the PostgreSQL failures.
1723 kes Implement algorithm to handle only one appendable volume with
1724 Prefer Mounted Volumes = no.
1725 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1726 returned from a query.
1727 kes Make volume lock recursive.
1728 kes Implement an additional volume reservation algorithm that
1729 starts by considering all reserved volumes then uses the
1730 old brute force algorithm of searching the resources to
1731 find a suitable device.
1732 kes Add new reservations debug code and refine the old code.
1733 kes Update the win32/dll/bacula.defs file.
1735 kes Tweak reservations algorithm to permit a few more cases, i.e.
1736 volume reserved, but on different drive, ...
1737 kes Enhance SD status to include Pool and Media Type for drive in a
1738 more readable format (a bit longer).
1739 kes Fix PostgreSQL double free.
1741 kes Minor refactoring of restore decryption code.
1742 kes Add code to smartall.c to detect double free of a buffer.
1744 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1745 so that bsmtp will create a correct email address (mailbox only).
1746 kes Modify 'memory' command so that the buffers are listed as 'In use'
1747 to avoid confusion with Orphaned buffers.
1748 kes I reworked the OpenSSL include/lib flags to be handled in
1749 the standard Bacula way, which should fix bug #863 concerning
1750 non-standard OpenSSL libraries.
1752 kes Implement Help Browser window for bat.
1753 kes Fix reload bug that reset StorageId to zero.
1755 kes Fix TLS #ifdefing when TLS turned off.
1756 kes Ensure that when labelling a tape with Slot=0 that InChanger
1758 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1760 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1761 add DISTINCT (required by PostgreSQL).
1762 kes Implement BSOCK authenticate_director() method. Eventually will
1763 authenicate all daemons.
1764 kes Move several more functions into the BSOCK class.
1766 kes Add code to tell the OS that we no longer need a cached
1767 file that we were reading. In findlib/bfile.c. Also,
1768 only cache files that we are reading. Thanks to
1769 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1770 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1771 kes Implement script to automatically generate cats and dll .def
1772 files for Win32 dll.
1773 kes Update README.mingw32 to include new .def file generation.
1774 kes Correct typo in UTF-8 error message as reported by:
1775 jhernandez <julianhernandez@gmail.com>
1776 kes Add additional sm_check() code on debug level 1.
1777 kes Set default debug level to 1.
1778 kes Trap SIGABRT in attempt to get traceback.
1780 kes Reduce bat connect timeout from 30 to 15 seconds.
1781 kes More restructuring and implementing BSOCK class in place of
1783 kes Remove a few unnecessary malloc() tests in crypto code.
1784 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1785 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1786 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1788 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1790 kes Fix Verify InitCatalog. The attributes were not pointing to the
1791 correct saved location.
1792 kes Implement message callback so that GUI is sure to get all
1793 daemon messages. Currently displayed in a dialog in bat.
1794 kes Ignore SIGUSR2 (Bacula timer) in bat.
1795 kes Apply regress patch from bug #859 to allow regress to work
1796 with Solaris compiler.
1798 kes Begin adding TLS support to bat.
1799 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1800 clean up lex.c and make it more readable.
1802 kes Move more bnet functions into the BSOCK class.
1803 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1804 kes Complete change of berrno strerror() method to bstrerror()
1806 Release: 2.1.10 beta
1808 kes Cleanup incorrect email addresses in bsmtp.
1809 kes Make bat display initial messages rather than discard them.
1811 kes First cut of adding .mod to the run command.
1812 kes Implement auto display of messages in bat.
1813 kes Enhanced preferences to allow all Bacula output to be
1816 kes Try to make bsmtp date routines more generic.
1817 kes Fixed bug #856 autochanger documentation.
1818 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1819 kes Add new cats entry point so Win32 builds.
1821 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1823 kes Do better checking for the MySQL 64 bit libraries looking for both
1824 .a and .so libraries.
1825 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1826 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1827 kes Require the thread safe version of MySQL during configure. Thanks
1828 to Andre Noll for pointing this out.
1829 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1830 continuing in migration code.
1831 kes Apply implementation of tray-monitor font derived from gnome-console
1832 submitted by Andreas Piesk <a.piesk@gmx.net>
1834 kes Eliminate important memory loss in SQLite
1835 kes Fixed the batch insert MySQL thread specific data that was not
1836 being freed. See cats/mysql.c:db_thread_cleanup().
1837 kes Fix restore before command.
1838 kes Convert old hdr.name to name() in a few places.
1839 kes Implement update jobid command.
1840 kes Return all time_t dates in db_get_job_record()
1841 kes Stop watchdog in SD earlier.
1842 kes Put Pool just after Storage in please mount message.
1843 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1846 kes Update the po files.
1847 kes Fix Verify InitCatalog by making it cache attributes.
1849 kes Change name bacula-bat to bat for man 1 page to correspond to
1851 kes Check for client and store NULL pointers in status command. This
1853 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1854 kes Fix sign extended editing of %p.
1855 kes Clean out a little old #ifdefing in cats/mysql.c
1857 kes If time diff between DIR and FD is more than 600 seconds convert
1858 INFO message to WARNING.
1859 kes Implement heap size display in status for all daemons.
1860 kes Attempt to fix MySQL db open memory loss (not successfull).
1861 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1862 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1863 Query. This looks like a MySQL but but by doing extra releases,
1864 the memory goes away. This should fix bug #847.
1866 kes When backup fails, cancel SD before waiting for sd termination.
1867 kes If SD is waiting for FD to connect during cancel, wake up the
1869 kes Fix fsf code so that errno is correctly reported.
1870 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1872 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1873 so that Bacula doesn't later stumble into a seg fault.
1874 kes Use the term Restore Client in the restore Job report.
1875 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1876 the original job's FileSetId.
1877 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1878 spooling in migration jobs. Not yet tested.
1879 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1880 reading conf file from a pipe. However, do it with open_bpipe()
1881 rather than popen. Not yet tested.
1883 kes Fix an ugly bug where the VolCatBytes were getting updated
1885 kes Implement bconsole memory command that prints current memory
1886 usage, plus smartalloc dump.
1887 kes Clarify some error messages in backup, admin, and migrate.
1888 kes Shrink label dialog to smaller size.
1889 kes Invert Cancel OK buttons on restore to be OK Cancel.
1890 kes More strerror() to bstrerror() conversions.
1892 kes Start implementing bstrerror() in place of strerror().
1893 kes Stripping path -- seems to work.
1895 kes Prevent door and port files from being restored (mostly
1897 kes Free an unreleased buffer in compat code.
1898 kes Change console Job name from *Console* to -Console- to eliminate
1899 Win32 filename problems. Put Win32 path separator when creating
1900 Console file. This fixes bug #846.
1901 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1903 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1905 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1906 to force Win32 error message.
1908 kes First cut strip path. The data should be passed to the FD,
1909 but nothing is done with it yet.
1910 kes Enhance the digest and signature routines in the crypto
1911 library to accept a JCR and to use it to print error messages
1912 so that they will go in the Job report rather than the daemon's
1914 kes Simplify some of the verify signature code.
1915 kes Simplify a few of the alternative returns in the signature
1918 ebl Use only POSIX regex instead of GNU regex in breg.c for
1919 File relocation. It fix broken freebsd compilation.
1920 kes Convert all other Dir files to use new ua class message
1922 kes Tentative fix for missing digest signature in bug 807.
1923 kes Correct handle problem in new win32_ftruncate routine.
1924 kes Convert ua_purge.c and ua_update.c to use new ua class
1925 message routines for bat.
1927 kes Correct incorrect installation of LICENSE in Win32 installer.
1928 kes Display LICENSE at the beginning of the Win32 install.
1929 kes Attempt to correct the need for the png files to be installed
1931 kes Reapply my bat.conf install script in qt-console. I think I
1932 editted bat.pro instead of bat.pro.in and it was lost.
1933 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1934 the /var/lock/subsys for subsysdir. Also corrects typos in the
1937 kes First cut update job.
1938 kes Correct configure to include qmake of src/qt-console directory.
1940 kes Make restore job yes/mod/no print in one command so GUI works.
1941 kes First cut implementing backup and restore client.
1942 kes Correct editing in Verify output that caused a seg fault.
1944 kes Insure that bat.conf is not overwritten during installation.
1945 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1946 while I was implementing migration in March 2006 !
1948 ebl Cleanup file relocation, using char *RegexWhere instead of
1949 char *where + bool where_use_regexp
1950 kes Update some manpages and add bat manpage.
1951 kes Make a first cut at converting bacula.spec.in for bwx-console
1953 kes Apply patch from John Goerzen to add hostname as fourth argument
1954 to make_catalog_backup script.
1955 kes Fix typos I introduced into bsmtp.c
1956 kes Make pm_strxxx() routines handle input of NULL pointer. This
1957 is to protect from NULL pointers returned from SQL databases.
1958 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1959 kes Add more debug to FIFO code -- fix fifo regression test.
1961 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1962 kes Add thread timer to bnet_connect() to break from OS if wait time
1965 kes Update Win32 build to include new files, new symbols, and
1967 kes Implement socket level heartbeat (tcp_keepidle)
1968 ebl Commit File relocation patch
1969 kes Make bat have 'make install' target.
1970 kes Warn during install if old gnome-console binary found.
1971 kes Warn during install if old wx-console binary found.
1972 kes Add -8 option to bsmtp command line to add content type utf-8.
1973 Fixes bug #809. (Character coding problem in bsmtp).
1974 kes If < is found in target (from, to, cc) then do not enclose the
1975 target in < > in bsmtp. Fixes bug #772 (malformed address).
1976 kes When printing certain items in dbcheck, stop after 300000.
1977 Fixes bug #822. (dbcheck loops).
1978 kes Incorrect status in Dir after waiting for mount with poll set.
1981 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1983 kes Print waiting to reserve a device every 5 mins.
1985 kes Don't call close_part in label.c if tape and relabel.
1986 kes Don't free volume if busy in close() -- should help with
1988 ebl Fix #824 RunScript bug (After script could be execute twice)
1989 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1990 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1991 Add a regression script to test RunScript
1993 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1996 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1997 deprecated. No additional bugs will be fixed, and they will be dropped
1998 in a future release (probably 2.4.0).
1999 kes Change name of wx-console to bwx-console to make it more Bacula
2001 kes Change the name of gnome-console to bgnome-console to make it
2004 kes Some time in March, a Feature Request with patch from Jorj Bauer
2005 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
2007 The ability for the director to validate a Client (FD) CN against
2008 an arbitrary set of patterns rather than the hostname, with
2009 A new 'TLS Allowed CN' set of directives which are implemented
2010 in the Client resource. Then pattern matching is used in place
2011 of hostname matching against the Certificate's CN. As an example, we
2012 have certificates which (a) use a local CA, and (b) have a CN of the
2014 kes Add new/changed entry points to Win32 build
2015 kes Create unaccepted-projects for projects that are not accepted.
2016 kes Simplify locking in the reservations system.
2017 kes Add more debug code in reservations.
2018 kes Make sure error condition on reserving a volume is handled correctly.
2019 kes Correct handling of volume_in_use.
2020 kes Correct handling of initializing a device.
2021 kes Move handling of broadcasting releasing a device into release_device().
2022 kes Correct attaching dcr to dev so that it is only done if device
2023 is properly initiated.
2025 kes Locking debug level tweaks in SD.
2026 kes Tweak new Volume code.
2028 kes Add exec external-command [wait-seconds] to bconsole. This
2029 executes the external-command. Note! normally external-command
2030 should be enclosed in double quotes.
2031 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
2032 it should normally be off in a production system.
2034 kes Implement die command for SD so that we can force it to dump.
2035 kes Implement SD lock debug code.
2036 kes Implement new algorithm for keeping Volume list in SD. It
2037 is now owned by the device.
2039 kes Implement new code for freeing in use volumes that should
2040 resolve if not all, some of the problems of multiple drive
2041 tape conflicts described in bug 801.
2043 kes Fix gui/bacula-web/images files in svn.
2044 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
2046 ebl Fix a bug in batch mode (in string escape)
2047 kes Correct migration prune SQL typo that crept in in a
2048 recent 2.1.x change.
2050 kes Move bnet_despool() into class in bsock.c
2051 kes Modify job report to include director name and Build OS.
2052 kes Move drop root privilege and check_catalog() before fork.
2053 kes Add update database scripts (version 9 to 10) to updatedb directory.
2055 ebl Check size and age of each file after its backup to see if
2056 it has changed during backup, if 'checkfilechanges' is set.
2057 The FD will do an extra check (stat(2)) after
2058 each file backup. mtime, ctime and size are compared with
2059 'before backup' information. If time or size mismatch, an
2060 error message will be generated. You must upgrade FD to use it.
2062 kes Make database name and user configurable
2063 --with-db-name=xxx --with-db-user=xxx
2064 kes Add back database type to message.c for debugging.
2066 kes Implement dir_sql() which issues an SQL query.
2067 kes Modify bat medialist to use dir_sql() and do some minor C++
2068 formatting as well as eliminating a number of pointers, simplifing
2071 kes Fix some of the mtx-changer grep commands for tape label readers.
2072 kes Convert a number of bsendmsg into the appropriate send/warning/error
2073 message class calls.
2074 kes Suppress the using database message in the .sql command.
2075 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
2077 kes Add context menu for floating a window.
2078 kes Some minor cleanup and name changes in qt-console
2079 kes Add doing mt setblk 0 in Win32 mtx-changer.
2080 kes Apply Martin's bug fix to move definition of ENODATA for
2082 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
2083 sqlite2 and sqlite3.
2085 kes More pruning cleanup.
2086 kes Turn on wait_for_drive by default in mtx-changer.
2087 kes Turn on Batch insert code by default as it now passes regression.
2088 kes Add ./configure --enable-bat to enable building of Bat.
2089 No install yet though.
2091 kes Implement a new .sql command for bat.
2092 kes Implement code to turn off pruning in obtaining the next volume.
2093 Pruning is turned off for the status dir command, but turned on
2094 for SD requests and for the list nextvolume command.
2096 kes Correct Qmsg() that was not updated correctly when committing a
2097 previous change (probably the recent TLS patch).
2099 kes Write new subroutine is_volume_purged() that explicitly checks
2100 if the Volume is purged, and if so marks it as such. This should
2101 resolve problems reported about needing to mount twice to recycle
2103 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2104 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2105 amount of duplicated code.
2106 kes Do volume pruning only for the Media Type desired (reduces pruning time
2107 if multiple Media Types are in the same pool).
2108 kes Implement more detailed info in the Job report for the Bacula version
2110 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2112 ebl Add bbatch tool to bench database and insert mode.
2113 Fix sql quote stuff in batch mode
2114 Fix sql stuff for mysql
2116 kes Correct problems with am/pm scheduling. Fixes bug #808.
2117 kes Implement new prunning code that prunes up to 1000 jobs at
2118 the same time. The same technique can be applied to a number
2119 of other prune/purge subroutines.
2120 kes Add an insanity check when starting a new tape job to ensure
2121 that the tape position has not been changed. If so fail the
2123 kes Fix Win32 build for dlls to add the folllowing:
2124 src/lib/bsock.c -- new file with new entry points
2125 src/lib/dlist.c -- new entry points
2126 src/cats/sql_create.c -- new entry point
2127 src/cats/sql_cmds.c -- new DATA item exported
2129 ebl batch mode cleanup bscan-test is ok now.
2130 kes Implement SD code to check length of disk volume before appending.
2132 kes Correct return status on db_batch... routines.
2133 kes Add call to db_write_batch_file_records() to migration code.
2134 ebl Fix AfterJob timing
2135 kes Move the checking of the database in initializion of the Director
2136 to after we drop privileges. This avoids the need for both root
2137 and bacula access to the DB.
2138 kes Correct a misplaced variable definition in src/filed/backup.c
2139 kes Correct how the new batch insert db_create_attributes_record()
2140 uses the arguments. Caused a seg fault in bscan.
2141 kes Implement lock() and unlock() methods in DEVICE class.
2142 Implement block() and set_block(xx) methods in DEVICE class.
2143 kes Modify bnet_connect() so that it uses time() to check for the
2144 wait time expiring (on some OSes, some system calls may not
2145 return immediately).
2146 kes Modify Verify to obtain the previous JobId when it is actually
2147 running rather than at schedule time (as it was in 1.38.x).
2148 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2150 kes When checking pid in pid file, continue running if the pid is
2151 the same as ours. This occurs on IRIX after a system crash.
2154 kes Extend new GUI API.
2155 kes Make the ua structure a class, and implement send_msg(),
2156 error_msg(), warning_msg(), and info_msg().
2158 kes Apply fix from for building wx-console on the Mac from
2160 kes Implement new select mechanism for GUI programs.
2161 kes Reorganize initialization of stackedWidgets in bat.
2163 kes Add updated nagios plugin supplied by Christian Masopust.
2165 kes More bat implementation.
2166 kes File migrate bug with Pool Occupancy using mediaid instead
2167 of jobids. Fixes bug #795.
2168 kes Fix orphaned buffers in filed backup and verify due to
2169 crypto buffers not freed during errors. Fixes bug #789.
2170 kes Extend new GUI api code to tree commands.
2171 kes Ensure that tree and dot commands check console ACLs.
2172 kes Permit marking directory with trailing slash.
2173 kes Allow 20 console connections (instead of only 10).
2175 kes Add smartctl call to bacula-sd.conf as an example of getting
2178 kes Modify jobq.c to let simultaneous restore jobs run. This may
2179 cause them to fail if they cannot get a drive.
2180 kes Add Client Connect Wait to Storage daemon to permit users to
2181 modify the time the SD waits for a FD connection.
2183 kes Correct virtual changer check which was backwards. This caused
2184 volumes to be unloaded into slots already occupied.
2186 kes Apply Command ACL filter to JobId list in restore command.
2187 kes Correct typeo in var.c patch.
2189 kes Don't let Bacula prune File or Job records for the current Job.
2190 kes Fix variable substitution pad + inc bug reported (with patch)
2193 kes Correct SQLite log table index as reported by Luca Berra.
2195 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2197 kes Begin implementing new comm signals for API.
2198 kes Fix a few places in lib/message.c where the open fd may
2200 kes Continue implementing lib/bsock.c (real class). Make jcr,
2201 who, host, and port private. There are new methods to access
2202 them for non-class use. This required touching a number of files.
2204 kes Add LANG=C to autoconf/randpass so it works with languages other
2205 than English. Fixes bug #788.
2207 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2209 You will not be able to generate Include/Exclude list any more.
2210 It will be fixed soon.
2211 If you want to use this, you can apply
2212 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2214 kes Restore of sockets created false error messages because Bacula
2215 no longer restores sockets, but the code was still trying to
2216 set the attributes on a non-existent file. Reported by a user.
2217 ebl finish RecyclePool feature
2218 Media will takes Pool.RecyclePool
2219 when moving from Scratch to a Pool or when user will do
2220 update volume=xxx frompool
2221 To use it, add RecyclePool = aPool to your Pool resource
2224 RecyclePool = Scratch
2228 kes Expand new BSOCK class adding signal() and new BNET signals.
2229 kes Begin enhancing the dot commands adding a new API function
2230 that returns more information and will make it easier
2231 to interface to the Director from a program.
2233 kes Make DEVICE fd private. Its new name is m_fd, and can be
2234 obtained with dev->fd() outside the class. This is the
2235 first of many DEVICE members to be made private.
2236 kes Implement Michael Renner's idea on having a virtual disk
2237 changer. I made some minor modifications (e.g. I did not
2238 implement the Virtual Changer directive, but simply set
2239 the Changer Command to an empty string.
2241 kes Implement a BSOCK send() method that writes the whole record
2242 in a single write() request rather than in two.
2243 ebl add update volume=xxx recyclepool=yyyy
2244 volume takes recyclepool from pool when using update volume=xxx from pool
2246 kes Fix encryption deblocking bug, which caused some restored files
2247 to be truncated. This fixes bug #763.
2248 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2249 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2251 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2252 ebl Use btime_t instead of uint64_t in media patch.
2254 kes Optimize the use of the database a bit in the Status dir command.
2255 Only open it when needed, ensure that if any previous database
2256 was opened, it is closed.
2258 kes Correct VolCatBytes bug from media patch.
2259 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2260 in the case of orphaned records.
2261 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2262 and File records in 300K chunks to be more efficient. This
2263 idea came from Juan Luis Frances (if I remember right).
2264 kes Apply Eric's scratch patch that moves a purged Volume to
2265 the RecyclePool. Question: how is RecyclePool set? what
2266 happens to the ScratchPool?
2267 kes Apply Eric's media patch that collects read/write media
2268 times as well as byte counts. This patch requires a
2269 simultaneous upgrade of the DIR and SD. Note, there
2270 should be some way to turn off timing. I'm not sure
2271 times are in Bacula units.
2272 kes Apply Eric's batch-insert patch.
2274 kes Update projects list.
2276 kes Implement Include/Exclude file lists in FD as dlists using
2277 the new dlistString class. This permits efficiently having
2278 large include/exclude lists and completes project Item 25.
2279 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2280 console is authorized to cancel the job. This fixes bug
2282 kes Modify SD so that the VolCatJobs medium record is updated
2283 at the beginning of a Job rather than the end. This
2284 fixes bug #775 where exceeding MaxVolJobs caused jobs
2286 kes Added a mutex around getting and setting Volume information
2287 so that multiple simultaneous jobs will single thread.
2289 Switch to using Subversion
2290 kes Remove src/pygtk-console/ from configure
2292 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2293 plus the entrypoints.
2294 kes Apply patch supplied that corrects debug print
2295 in canceling jobs for max run time. Supplied as
2296 part of bug #621, which was previously fixed.
2298 kes Test on job_canceled() and sd_msg_thread_done inside
2299 loop starting the message thread to avoid a race condition.
2301 kes Remove rl_catch_signal from console.c as it conflicted
2302 with the header definition. Fixes bug #765.
2303 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2305 kes Clarify some stored/acquire messages to indicate if the
2306 problem is with read or append.
2308 kes Fix memory leak with storage ids in cats/sql_get.c
2309 kes Terminate watchdog earlier to avoid reference to released
2310 memory -- reported by Jason Austin.
2311 kes Move closing the database from jobq.c to the director daemon
2312 termination routine. This fixes memory leaks for shadow jobs
2313 (i.e. migration jobs).
2314 kes Free up the unique jobid chain items in migrate.c. This fixes
2315 a memory leak problem.
2316 kes Convert some ugly looking for statements to use foreach_alist
2317 in findlib/find.c. This will facilitate converting the structures
2318 to use dlist (for large include/exclude lists).
2319 kes Fix a bug in the btree.c and btree.h routines, then rename them
2320 rblist and add them to be built in src/lib. Include some new
2321 methods written by Rudolf Cejka that make the code more readable
2322 (hides some of the ugly casting).
2323 kes Add set_next() and set_prev() methods which make the code much more
2324 readable. Also add a new dlistString class that facilitates storing
2325 strings in dlists. To be used in the large include/exclude lists.
2326 kes Make some trivial modifications to lib/tree.h that use rblist
2327 rather than dlist for storing the tree links. This was suggested
2328 by Rudolf Cejka. The result of this is that the restore tree now
2329 uses red-black binary trees rather than simple linked lists. This
2330 should give rather dramatic speed improvements for directories
2331 contining large numbers of directories/files (more than 10000).
2333 kes Fix maxruntime bug #621.
2335 ebl Implement the include JobID in spool file name project.
2336 kes Reorder projects file in order determined by Jan 2007 vote.
2337 kes Implement item #12 on project list -- quick release of FD by
2339 kes Fix open of SQLite3 db where user does not have write permission
2340 so that DIR does not crash. Fixes bug #761.
2342 kes Add back missing @ in Win32 Makefile.
2343 kes Change 'Device not configured to autolabel' from INFO
2345 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2346 which should restart an indefinite # of times.
2347 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2348 other DIR specifications.
2350 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2351 Fix path quoting in SQLite scripts.
2352 Fix problems with SHGetFolderPath.
2354 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2356 kes Fix Job restart on error bug that promotes an Inc to a Full
2357 backup. This should fix bug #755.
2358 kes Add qt-console and first cut of code.
2362 kes Fix Bacula->Documentation link on Win32 to point to index.html
2363 instead of bacula.html. Fixed bug #750.
2364 kes Return JobId in db_get_job_record() when JobId==0. This should
2366 kes Do not release source pointers when restarting a failed job.
2368 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2369 This *should* fix bug #747.
2370 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2373 kes Modify USTORE constructor to set an empty store_source string,
2374 and don't copy the store_source string in a cancel. Hopefully
2375 this will fix Arno's seg fault, bug #744.
2376 kes Add back code to disable conio in configure. Fixes bug #743.
2377 kes Correct the Options scanner in the FD to correctly handle
2378 SHA1 option, which was eating the next option. Reported by
2380 kes Add code to indicate when the SD is spooling, spool wait, and
2381 despooling as requested by Alan Brown.
2383 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob