1 Technical notes on version 2.5
6 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
7 examples/database/dbcheck.sql
10 dbdriver in bacula-dir.conf
12 enhancement to wait command: wait mount ...
17 remove reader/writer in FOPTS????
21 kes Move generation of bsr file for Virtual Backup to run section
22 so that it is generated just before actually running.
23 Suggested by Graham Keeling.
25 kes Add malloc and free Bacula entry points for plugins. Increment
26 FD plugin interface version. Create a bacula plugin context
27 structure to keep track of whether or not the plugin is disabled.
28 kes Apply FileIndex fix for plugin name stream suggested by James.
29 kes List plugins in FD status report when debug > 0.
31 ebl Add a new VerId variable that is printed in version command.
32 kes Fix migration SQL not to migrate a job that has not terminated.
33 This is a partial fix to bug #1164.
34 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
35 backup start time bug reported by Graham Keeling.
37 ebl Fix possible bug in cancel_job() with job that are not
40 kes Fix bat build for Win32.
42 kes Copy plugin link field into ffpkt.
44 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
45 It provides FileRegex in bsr files and code to collect regex
46 from the user during restore, an Allow Mixed Priorities feature,
47 and documentation for the above.
48 ebl Remove db berkeley from configure process
49 kes Do dirty check on hostname (Linux only) and if not resolvable
50 use localhost as default.
51 kes Increase vtape max block to 20GB.
53 kes Refactor restore code to create a close_previous_stream(). This
54 This may destabilize the source.
55 kes Implement planned startRestoreFile() plugin call.
56 ebl Remove missing Loaded information from status slots storage command.
57 ebl Fix Console command problem that cancels the job
58 kes Add more plugin restore debug code.
60 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
61 kes Rewrite plugin restore interface a bit to correspond to how Bacula
62 creates and writes to the restored file.
63 kes Add some DebugMessage() calls to the bpipe-fd.c program.
65 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
66 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
67 Bat; allow add and delete in place of mark and unmark.
68 kes Another attempt to fix the endRestoreFile plugin bug noted below.
70 kes Apply dbi driver patch from Joao.
71 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
72 Bastien Friedrich reported the bug.
73 kes Create plugin instance only when FD job starts.
74 kes Add new FD plugin event: bEventCancelCommand when
75 a cancel command is issued to the FD.
77 kes Add cmd_plugin flag to jcr so we can globally know if a
78 command plugin is running.
79 kes If command plugin running, do not attempt (for the moment)
80 to get Win32 extended attributes.
81 kes Ensure that proper Win32 flags are set in bfile packet
82 if plugin_bopen() works on Win32.
83 kes Remove generated src/plugins/fd/Makefile
85 kes Implement build and install of bpipe-fd.so plugin.
86 kes Rework the interface that passes packets to the plugin
87 so that the packet is started and ended by the packet size.
88 This allows the driver to do a sanity check.
90 kes Rework the pluginIO Bacula internal code to enable
91 proper handling of Win32 error codes from GetLastError.
92 kes Apply Joao's patch to regress startover_libdbi.
94 ebl Add -B option to dbcheck to get catalog information
95 kes Fix Win32 build to include new library function.
96 kes Remove some old reader/writer code.
97 kes Implement ./configure --with-plugindir=xxx
98 ebl Fix the mysql bug in the new accurate code
99 kes Improve plugin debug. Create plugin test.
100 kes Set main thread specific data to INVALID because it
101 has no jcr. This allows debug output to work correctly.
102 kes Add src/plugins/fd/Makefile to ./configure process.
103 kes Make first cut attempt to correct SQL that computes the current
104 Pool usage. This is to fix bug #1159.
105 kes Do a bunch of plugin cleanups for Win32 and more careful checking
106 of PluginDirectory and whether or not a plugin was found.
108 kes This code should fix the race condition that leads to a Director
109 crash at job end time when the job list is updated. This was reported
111 kes Add more plugin documentation and fix include of config.h for
112 Win32 build (I hope).
114 ebl Revert to htable instead of rblist
115 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
116 tree instead of htable.
117 ebl Use a dedicate DB link to compute and send the accurate list
120 kes Fix compile errors in filed/fd_plugin.c.
122 kes Remove all double quotes from SQLite creating script and
123 replace by single quotes as suggested by John Huttley.
125 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
126 It significantly improves the performance of dbcheck for
128 kes Fix bad debug code call in src/filed/accurate.c
130 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
131 output. Perhaps we really need to implement M_SAVED.
133 kes Fix bug #1156 FD crash during processing of Accurate data.
134 kes Tweaks to htable code to improved debugging and make names
135 a bit more meaningful.
137 ebl Remove time_t from update_stats()
139 kes Modify the license of the example plugin program to allow
140 it to be used by anyone for making a Bacula plugin.
141 kes Make apply_rp_codes() in bpipe-fd.c be static.
143 kes Remove Encryption and Accurate lines in vbackup output -- not used.
144 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
145 kes Add host name to items printed during dump.
146 kes Make Check File Changes default on.
148 kes Set the default FD timeout to 3 minutes (previously 30).
149 kes Apply Bastian Friedrich's weird spelling correction patch.
151 kes Always print Verify hash differences. Rename variable to make the
152 code slightly more readable.
154 kes Correct tests for MaxFullInterval as reported by
155 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
156 kes Fix MaxDiffInterval code as well.
157 kes Enable Win32 plugin load code in lib.
158 kes Make Verify code that computes disk checksums use the same
159 algorithm as backup when dealing with sparse files.
160 kes Attempt to run VSS on any systems newer than Vista -- should
161 make it work on Windows Server 2008.
162 ebl Change the new statistic implementation. Remove the UseStatistic
163 directive and add a 'update stats [days=...]' command. You can
164 now decide when copy job records from Job table to JobStat.
165 Statistics are much more accurate with this.
167 kes Fix SQL case problem that may cause the failure of DiskToCatalog
169 kes First cut adding SD plugins.
171 kes Add Slot if it is non-zero to writing bsr file after a
173 kes Change a number of bnet_fsend() into class method calls.
174 kes Begin audit of diff of 2.4 branch to trunk code.
176 ebl Fix the mysql creation script that double-created an
177 index of the same field on the Media table.
178 Add an index to on VolumeName to the Media table for mysql.
180 kes Another try at fixing Vbackup. It looks much better this time.
181 Disable file index sanity check in FD with value stored in
182 attributes record because with Vbackup the File Index gets
183 changed, but not the attributes record.
184 Enhance some debug code.
185 Fix handling of re-indexing records that are copied in Vbackup.
187 kes Made level_to_str() know about Virtual backup.
188 kes Set correct Virtual backup write pool.
189 kes Fix compile warning in new dbcheck port code.
190 kes Fix migration code broken by previous virtual backup fix.
192 kes Fix problem of Virtual backup not writing a sequential FileIndex.
193 kes Reset Virtual backup time/date to the value from the last backup.
194 kes Ensure that storage name is passed to SD on read.
195 kes Correct a problem with Level and Virtual backup, rework how
196 bsrs are printed in debug to use standard routine.
197 kes Apply patch from Chris in bug #1133 that provides alternate db port
199 ebl Remove catalog dependency from bcopy tool.
200 ebl Modify catalog scripts to have an easier packaging integration,
201 using default variables.
202 Make difference between SQLite3 and SQLite in db_get_type()
204 kes Apply most of changes in a patch from:
205 Michael Stapelberg <michael+bacula@stapelberg.de>
206 that allow the Bacula FD to compile on IRIX 6.5.
208 kes Apply patch from Bastian Friedrich that accepts a yes on a
209 delete volume command line.
210 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
211 job when reading from one autochanger and writing to another.
212 kes Minor tweaks (copyright dates convert to use method instead of bnet).
214 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
215 drives when no tape is mounted.
217 kes Add additional info to some SD messages.
218 kes Add fix supplied by Martin Simmons for turning off EOL character
219 in new console multi-command code.
221 kes Fix a Verify InitCatalog problem where in certain cases
222 a garbage filename may be entered in the verification database. This
225 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
226 sent in by Riyas Yoosuf.
228 kes Fix seg fault in Dir during estimate command with no level value
229 given. This fixes bug #1140.
231 kes Add message to migration job when the target job is already migrated.
232 This closes bug #1129.
235 kes Raise some restore debug levels.
236 kes Replace off_t by boffset_t where ever I found it.
238 kes Define a machine dependent ioctl request type for use with
241 kes When a migration job actually runs, re-check the Job record
242 and skip if the job is already migrated. This should
243 significantly reduce the problems with bug #1129.
245 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
246 turn off glibc checks that prevent getting good dumps.
247 kes Implement console 'wait mount' command. Doesn't yet work.
248 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
249 kes Break the do_swapping into do_unload, do_swapping, and
250 do_load. It is much more logical that way.
251 kes Implement a set_dcr_from_vol subroutine in acquire.c for
252 reading volumes. This allows the dcr to be refreshed after being
253 zapped when the wrong volume is mounted.
254 This should fix bug #1126 -- During multiple tape restore, bacula
255 does not ask for physical tape change, but rereads same tape
257 kes Apply patch submitted for bug #1107 with a small modification.
258 This fixes a bug where bcopy copied too many records.
259 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
260 This fixes bug #1124.
261 kes Make the default bat restore Pool be Any. This fixes bug #1118.
263 kes Remove debug statement that crashes the SD at the end of
264 a tape during restore. Fixes bug #1125.
266 kes Implement Win32 bat changes made to Branch-2.4
268 kes Tweak separator command in console to start disabled and
269 allow defining no separator character. Also make code a
270 bit more fault tolerant.
271 kes Make btraceback write the traceback to the working directory
272 before attempting to mail it.
273 kes Add a RFC to Projects.
275 kes Attempt to implement a kludge to make Qt work with bat
277 kes Setup rstorage correctly. Virtual backups are working.
279 kes Move setting JobLevel and JobType into a method, which should
280 allow completing Virtual Backups.
281 kes Fix verify jobs to work again.
283 kes Virtual Backup tweaks -- it is close to working.
285 kes Ensure that SD tried to mount a volume not in an autochanger
286 at least once before asking for operator intervention.
287 kes Make SD aware of Virtual Backup jobs.
288 kes Add VirtualFull for bat.
289 kes Changes to get read storage correct for Virtual Backup.
291 kes Remove old code from label.c
292 kes Split display_display_info() out of write_bsr_file()
293 kes do_vbackup_init() working -- i.e. bootstrap file built.
294 kes Change Bacula trademark owner from John Walker to Kern Sibbald
295 kes First non-working cut of vbackup
296 kes Correct FD heartbeat code to use volatile variable accessed by
298 kes Zero thread id with memset if on Win32 in case it is a struct.
299 kes If cannot create JobMedia record, continue to try to write eof
300 and clean up in block.c
302 kes Add code to interface OpenSSL to new Win32 pthreads code which
303 used a structure for thread_t.
305 ebl tweak bat for win32 compilation
307 ebl Remove tokyo cabinet from the source
308 ebl Update configure/autoconf to support berkeley DB
309 ebl Add a sort to db_get_file_list() to improve bsr construction time.
311 kes Add a mtx-changer.conf file that is not overwritten during
312 an upgrade. It fully configures the mtx-changer script.
313 kes Clear in-use bit on vol when unused while swapping.
315 kes Remove sleep at end of ./bacula
316 kes Clear hash packet for hardlinked files correctly. This corrects
317 a long standing bug where hardlinked files selected individually
318 would occasionally not be restored.
320 kes Apply Eric's patch to ensure that autoprune does not return
321 a Volume not in the autochanger unless requested to do so.
322 kes Correct bat restore display of multiple drives. This fixes
324 kes Do find_a_volume() each time an unload is done. This
325 fixes the failure of maxvol2-test.
327 kes Add some SD debug code.
328 kes Do find_a_volume() each time an unload is done.
329 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
330 and adds --with-db-port to ./configure.
331 kes Use Qmsg() in job.c watchdog callback.
333 kes Release main control rwlock if ABORTing.
334 kes Make watchdog connect timeout queue messages rather than sending
335 directly to avoid lock conflicts with the real thread.
336 kes Add const char in dbd.c to avoid compiler warnings.
337 kes Fix python compiler string warning. Note, IMO the GNU C++
338 compiler guys have made a *very* bad change to their compiler.
339 They now force all strings to be 'const' unless you explicitly
340 cast them, which is extremely ugly and ruins nice code as well
341 as creates a lot of useless work.
343 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
344 mt. This fixes bug #1116.
345 kes Add const in python files to reduce compiler warnings.
346 This may have to be backed out because of later compiler
348 kes Fix failure of 2drive-concurrent-test. Always read label;
349 clear_unload() only after drive is defined in acquire_for_read().
351 kes Generally clean up the manual tape loading code. The main
352 conceptual change is that when a volume is marked to be unloaded,
353 its volume name is retained, and it is only marked as unloaded
354 when either the autoloader says it is unloaded or another tape
355 is read on that drive.
357 kes Add debug code and refactor subroutine in stored/mount.c
358 kes Fix format problem in bscan output reported in bug #1105.
359 ebl Fix get_next_volume_for_append logic with autochanger
360 - use pruned volumes if found
361 - don't reset the inchanger flag after getting a recycled volume
363 Fix recycle_oldest_purged_volume to take InChanger flag in account
365 ebl Add mmap/unmmap implementation for tokyodbm under win32
367 kes Make first step toward eliminating globals from config
368 scanning. Also should be a workaround for FORTIFY_SOURCE
369 GNU C bug -- fixes bug #1042.
371 kes Apply duplicate job tests to restarted jobs.
372 kes Copy more data when restarting a job so that run
373 overrides are kept. This should fix bug #1094.
375 kes More word alignment cleanup.
376 kes Fix bug where SD did not ask operator if the device could not
377 be opened. Reported by Eric.
379 kes Add dbuser to DIR conf file (replaces user).
380 kes Add --with-db-password to ./configure
381 kes Fix regress to handle db_password.
382 ebl Add new 'status storage slots' that list autochanger
384 ebl Update vtape driver to compile only under Linux.
385 ebl Fix a bug when restoring with a wrong mediatype.
387 kes Eliminate ints from conf files and structures to avoid
388 word alignment problems
390 kes Fix bug reported by Scott Barninger where the bacula script
391 refers to scripts in the wrong directory. Needed to meet the
392 requirements of recent FHS location changes.
393 ebl Disable vtape for FreeBSD.
395 ebl Modify disk-changer to check if slot contains something before
398 ebl Fix vtape on win32 and debian.
399 ebl Fix autoselect patch (cause segfault).
401 ebl Fix autoselect option broken for a while. Fix #1089. Need some
402 work with StorageId to be able to use a particular drive in a
405 ebl Rename vtape to vtape.
406 ebl Update vtape driver.
408 ebl Modify vtape driver to avoid sparse file.
409 kes Add make clean of qt-source directory during ./configure
410 kes Store last block number written to tape in DEVICE and
411 use it for testing for correct last block on EOT.
413 Release Version 2.4.0:
417 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
418 This fixes bug #1095.
420 kes Add create_postgresql_database.sql to Win32 installer. Should
421 fix problem reported by Juilio Monteiro.
422 kes Get correct slot when auto unloading a device. This fixes bug
425 kes Fix multiple media restore.
426 kes Make DEVICE Slot private and access it via a method.
427 Allows better control over when it is set and cleared.
428 kes Fix possible seg fault if SQL error.
430 kes Add Martin's fixes to argument scanning for the estimate
431 command. This fixes bug #1093.
432 kes Add debug code to SD.
433 kes Fix renaming a Volume, which used the wrong Volume name.
435 kes If operator has rewind tape, print warning, release tape and
436 try once more. If tape is positioned somewhere, something went
437 wrong, so mark the tape in error and try once more. Previously
438 this error was fatal, now it produces an error message.
439 kes Ensure correct volume name displayed during restore
440 kes Ensure that Volume is mounted for restore.
442 kes Fix a few more Coverity reported problems.
444 kes Apply Allan Black's status dir job count patch.
445 ebl Add information about IMPORT/EXPORT slots in mtx-script.
446 kes Enhance a couple of SD debug messages.
447 kes Tweak unload flag setting and ensure it is set during swap.
449 ebl Fix #1091 about bad output in estimate command.
451 kes Modify autochanger locking to attempt to avoid race
453 kes Make sure device not busy before doing label command.
454 kes Display open() errors except when polling. Previously too
455 many were suppressed. This should fix bug #1070.
456 kes Fix Win32 reparse points. Bacula will not recurse into any
457 reparse point directory, including mount points, unless the
458 directory is explicitly mentioned at the top level (same as
459 with Unix). A file that is linked to another file will be
460 backed up -- much as Unix does for hardlinked files.
461 This fixes bug #1041.
463 kes Remove double quotes from ChangeLog and ReleaseNotes
464 kes Remove StorageId test when pruning and recycling (Eric's changes).
465 kes Remove old form of locking when getting volumes -- causes deadlock.
466 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
467 the name unique and to eliminate compile time error.
468 kes Add accurate.o to Win32 FD Makefile
470 kes Fix cats dll build on Win32 after db_update_job_end_record
471 calling sequence change.
472 ebl Switch to tokyo dbm instead of htable in accurate code
473 ebl Include tokyo dbm to bacula source tree
475 kes Fix buffer overruns detected by Coverity.
477 kes Tweak joblog display.
479 kes Implement --without-qwt
480 kes Fix layout of restore tree dialog
481 kes Add configure bat QWT libraries, so that bat can be built
482 with or without the QWT libaries.
484 ebl Add dummy tape driver for regression tests.
485 kes Make sure we unload the right slot when swapping.
487 kes Add debug times, reduce size of two-pool-changer test
489 ebl Tweak autoconf scripts for vtape
491 kes Improve SD reserve debug code.
492 kes Testing an improvement to free up volumes no longer in use.
494 kes Rework SD acquire for read to handle autochanger Volume
496 kes Implement regression that explicitly tests swapping a Volume
497 from one drive to another.
498 kes Enhance disk-changer to detect most error conditions.
499 kes Fix SD code so that it properly swaps a Volume between drives.
500 This fixes bug #1083.
502 kes Apply libdbi patch from Joao Freitas for regress and for
503 Bacula trunk. Regress now works with libdbi. Nice.
504 kes Apply .nobackup patch from bug #1077 submitted by
506 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
507 name into jobs cloned via the run directive.
509 kes Prevent a Volume that is being swapped from being freed from
510 the volume list. This will most likely fix, at least partially,
512 kes Fix strippath so that it does not get a buffer overrun and crash FD.
513 This fixes bug #1078.
514 kes Remove 50 millisec wait in SD that broke debugger.
515 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
516 that a job may run, counted from when the job was scheduled.
517 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
518 a job may block waiting for a resource, counted from when the job starts
519 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
520 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
521 that implements multiple commands per line in the console when using
522 readline. Modify the default to use a semicolon as the command separator.
524 ebl Fix SQL query in migration code.
525 ebl Make accurate mode with hash disk pass regression tests
527 ebl Implement first cut of accurate backup with hash disk.
529 kes Force unload of volume when wrong volume mounted in SD.
531 kes Fix bat seg fault at termination.
532 kes Add Bacula generated version to bat about box.
535 kes Experiment with allowing multiple read jobs.
536 kes Move final volume swapping code to DCR method and
537 call it from acquire_for_read().
538 kes When wrong volume is mounted during read, unload_autochanger.
540 kes Integrate the libdbi changes from Joao Henrique Freitas
542 kes Stop searching for Volumes in SD askdir if DIR returns the
543 same volume name twice in a row.
544 kes Close bat console windows first to eliminate error message
547 kes Tweak the swap Volume from one drive to another code so that
548 it now seems to work.
549 kes Resolve several problems with recycling that broke the new
550 code (these problems are in 2.2.9 as well).
551 kes Remove the volume lock when calling the sysop code.
552 kes Don't mark a reserved volume with no writers as unused otherwise
555 kes Rework class structures for VOLRES, DCR, and DEVICE to make
556 the method names a bit more logical, and for more logically
557 handling the responsibilities.
559 kes Remove redundant code in terminating the scheduler that just
560 causes a seg fault in many cases.
561 kes Cleanup releasing a volume and make it a DCR method.
562 kes Improve algorithm for detecting pre-reserved volume and
565 kes Tweak volume swapping code so it works.
566 kes Correct name overloading in mount.c
567 kes Replace released flag in VOLRES with reserved and add access
568 methods for the VOLRES class.
569 kes Prevent volume from being released while being swapped.
570 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
571 plugin that add %w (where) and %r (replace flag) editing to
573 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
575 kes Refactor parts of stored/mount.c
577 ebl Add sanity checks for VolWriteTime and VolReadTime
578 ebl Take care of bad clock changes while computing VolWriteTime
579 and VolReadTime. This should fix or limit #1066
580 kes Correct error string numbers in dird/catreq.c
581 kes Restructure reserving, acquiring, and mounting volumes. Calls to
582 autochanger are deferred for mount.c -- simplifes the code.
584 kes Do not prune any running job. It just fails the job.
585 kes Lock the volumes when changing dev->reserved_device and marking
586 the volume unused otherwise the device can get reserved by
587 another job before the volume is released, thus blocking it.
589 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
590 kes Fix bug #1063, reuse of freed ptr in list nextvol.
591 kes Release regex compile buffer in filed/job.c
592 kes Add proper type of const char in sql_create.c
593 kes Turn off debug in daemon termination routines
594 kes Move free_volume_list() before devices are freed in stored.c
595 kes Fix reference to uninitalized stack variables in bregex.c.
596 This should correct bug #1067.
598 kes Fix possible seg fault in SD when freeing a volume entry.
600 kes Implement unload_dev() before swap device.
601 ebl Add statistics prunning with option and menu
602 kes Separate unload_dev() from unload_other_device() in autochanger.c
604 kes Apply patch from bug #1069 that corrects spurious error messages
605 when ACLs enabled on SGI but no ACL exists.
606 ebl Fix small segfault in bacula-sd when debug level is 500
607 kes Modify run_program() and run_program_full_output() to use
608 call by reference for the results string. This corrects a long
609 standing problem where the address of the string may be changed
610 in the subroutine but not in the calling program.
612 kes Re-enable code to remember last volume mounted on a non-tape
614 kes Add patch supplied in bug #1068 that fixes a SD crash when using
615 a Virtual autochanger.
616 kes Generate correct JobMedia records during spooling/despooling when
617 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
618 <tih@hamartun.priv.no> for excellent analysis and testing.
620 kes Tweak hash algorithm for htable using Martin Simmons idea
621 for doing a circular shift.
622 kes Remember what volume is in VTLs (previously turned off for
624 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
625 pointed out some problems in creating JobMedia records during
626 spooling with concurrent jobs. Fix the problem by updating the
627 start file position before despooling and generate a jobmedia
628 record at the end of despooling.
630 kes Fix handling of JobMedia records during spooling and when a
631 Volume is changed without actually writing data to the Volume.
633 kes Rework certain SD locking based on gdb tracebacks of deadlocks
634 sent by Eric. This code now uses only the volume_lock() rather
635 than the reservations lock when at EOM and acquiring a new
637 kes Ensure only one exit point in several subroutines.
639 kes Implement bsock code to permit locking. Use the new code in Verify
640 in the FD to prevent the heartbeat thread from disrupting the Verify
641 data sent to the Dir.
642 kes Modify SD locking to eliminate locking the reservations system from
643 outside the system. Use the volume lock when getting media data
644 and reserving a new volume at end of media.
645 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
646 when SD starts are not locked into place.
648 kes Fix error compiling runscript code on 64 bit machines.
649 kes Tweak Win32 mount point code.
650 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
651 cleared giving bad file estimate).
652 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
655 kes Keep Schedule run lists in order as suggested by
658 kes Implement autostart scripts for Debian.
659 ebl Implement upgrade catalog scripts.
661 ebl Apply jobstat patch for long term statistics. Have to implement
662 purge stats command and upgrade scripts.
663 kes Fix mtx-changer.in for broken Debian mt program.
665 kes Fix large number of JobMedia records reported by Eric Bollengier.
667 kes Apply doc fix from bug #1062.
668 kes Resolve crash and improper restore wx-console Win32 restore
669 GUI. Fixes bug #1065.
670 kes Update Win32 wxWidgets to latest version.
671 kes Attempt to do correct handling of Win32 mount points. Should
673 kes Fix Win32 FD backup/restore memory leak due to improper termination
674 of BackupRead/Write. This fixes bug# 1038.
676 ebl Reduce memory usage for accurate backup, working only with ctime
677 and mtime. (not all Lstat field)
678 About 40MB for my Linux system (400.000 files)
680 kes Add dcr->reserved_volume flag that allows us to release a volume
681 even if it is not vol->released. This allows maxvol2 to work when
682 Volumes expire and we are already writing to the device (i.e. a
683 volume is pulled out from under us by another job terminating after
684 we reserve the drive).
686 ebl Permit multiple command/console per runscript definition.
687 RunScript { command = /bin/true ; command = /bin/false ... }
688 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
689 (restart an application) just after the VSS snapshot on windows.
690 kes Don't zap dcr values during release_volume() as they might
691 have the next Volume to be mounted.
692 kes Fix AIX prototype.
694 kes Second cut of drive switching during backup.
697 kes Update Win32 version of wxWidgets to most recent version.
698 kes Tweak Copy job details.
699 kes Rework dir_find_next_appendable_volume to make a bit more effort
700 to find a suitable volume before giving up.
702 kes Make ask_sysop_to_create... to return if waken from wait.
703 This helps get out of blocked conditions.
704 kes Experimental implementation of switch_device in reservations.
705 kes Implement FD version to allow easier protocol changes.
706 kes Add Plugin Options string -- not yet passed to FD.
707 kes Implement PluginOptions ACL.
709 kes Attempt to correct problems with restores with autochangers and
710 use counts going negative
711 kes Rework SD status command and implement API for bat. Implements
712 header, runing waitreservation, devices, volumes, spooling,
713 and terminated status keywords.
714 .status storage=xxx <keyword>
715 kes Clarify TLS error message by adding double quotes around name.
716 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
717 kes Pass jcr to tls routines so debug messages can be handled better.
718 kes Rework jobq resource allocation code, and possibly fix a bug
719 that caused reference counts to get out of sync.
721 kes Rename fd/dir plugin to use Bacula standard underscore.
722 kes Plugin work -- bring dir up to fd level.
723 kes Start implementation of VTL code
724 kes Fix Win32 build after adding new cats subroutine.
726 kes First cut at Duplicate Job implementation.
728 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
729 kes Start PluginOptions string, and refactor a bit of ua_run.c
730 ebl Apply Allan patch that permit to reset recyclepool.
732 kes Test patch -- possible fix or improvement for bug #1053
733 kes Refactor FD and SD status commands to permit new API code in
734 SD, and to fix Win32 build.
735 kes Win32 build is now working.
737 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
738 some ideas in patch from Scott Bailey.
739 kes Begin implementation of duplicate Job control.
740 kes Fix some of Win32 build after recent additions.
741 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
742 which causes the FD to detect whether or not the OS has the
743 honor no dump bit (*BSD systems), and if so, to skip backing up
744 any file with this bit set. The feature is enabled by setting
745 'honor no dump flag = yes' in the Options section of a FileSet.
747 kes Correct po warning message with datarootdir
748 kes Implement more code in dird.c to put configuration parsing in
749 a class rather than use globals.
750 kes Restructure SD status command for implementation of bat API
753 kes Suppress incorrect 'Will not descend from x into y' messages.
754 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
755 daemon globals used by parser.
756 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
758 kes Fix free of plugin_list when none exists.
760 ebl Apply accurate project patch.
762 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
763 on non-mempool object)
764 kes First cut of converting FD .status to work with bat API.
766 .status client=XXX header
767 .status client=XXX running
768 .status client=XXX terminated
769 kes Implement first cut of Copy Job.
770 kes Implement Catalog in Pool resource. It overrides catalog specified
771 in the Client resource.
773 kes Apply patch (with some difficulties) from Joao Henrique Freitas
774 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
776 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
777 ftruncate() actually works. In the case of some (cheap) NAS devices,
778 it does not, and so recycling NAS Volumes does not work. The code
779 simply unlink()s the file, then recreates it. This fixes bug #1011.
781 kes First incomplete cut of big malloc blocks for htable.
782 kes Tweak plugin code.
784 kes Plugin debug code + tweak a couple bat dialog layouts
786 kes Fix creating first JobMedia record during Migration to include
787 proper index. This caused slow restores of migrated jobs.
788 kes Temp fix to plugin name file_index.
789 kes Bacula backed up and restored a MySQL database.
791 kes Implement plugin restore.
792 kes Implement parsing of db_driver to give db_type index.
794 kes First cut of plugin restore code.
795 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
796 and do not strip paths on symbolic links.
797 kes Set catalog backup database and user name from values specified on
798 the ./configure line.
799 ebl Fix #1031 about wrong pool source information in job report.
802 kes Remove a redundant jcr argument to find_files, match_files, and
804 kes Implement '.status dir header|scheduled|running|terminated' that
805 prints the requested status section. With the exception of the
806 header, the other reports have fields separated by tabs (\t).
808 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
809 a resource embedded run command to find a since time if no explicit
810 since time was supplied on the command line.
811 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
812 that updates the state file at job termination time in addition to
813 when the daemon terminates.
815 kes First version where a plugin did a backup.
816 bpipe-fd.so created a backup file, wrote a test
817 string to it, and Bacua could restore this fabricated file.
819 kes Implement DB Driver = string for the DBI driver.
820 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
821 kes First cut of code for loading Win32 plugin dlls. Implement
822 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
823 and implement a dlfcn.h file based on opengroup's definitions of
826 kes First cut plugin directives.
828 kes Apply patch from bug #1049 to prevent stripping the path on a
830 kes Attempt to fix bug #1047 where stripping a path corrupts the
831 heap. Waiting for feedback.
832 kes Correct the Mount message not to suggest labeling a new tape
833 when doing a restore. Submitted by email by John Stoffel.
834 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
835 FD by using casting. Reported in bug #1042.
837 kes A bit of crypto cleanup. More later.
839 Release Version 2.2.8
841 kes Apply patch from Martin to correct bug #1040, bscan sets existing
843 kes Fixed important spelling error in doc -- bug #1045.
845 ebl Fix bextract to be able to extract non-portable Win32 data to
847 kes Move initialization of read/write res lock earlier in the code.
848 This fixes the crash with a null conf file. This fixes bug
850 kes Redefine CURES in lib/parse_conf to be URES and move it all
851 into lib/parse_conf.c -- this responds to bug #1042, but does
852 not fix it. The fix is not to compile with FORTIFY_SOURCE.
853 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
854 the trunk SVN. I don't think this was reported as a bug.
856 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
858 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
860 kes Add DataDespooling and DataCommitting status (committing is
861 the last despooling).
862 kes Finish implementation of new reservations code noted below.
864 kes Fix bsnprintf for float point numbers. I broke recently when
865 parameterizing some variables. This fixes bug #1036.
866 kes Undo recent reservations changes ... will apply them later
867 when they work better.
869 ebl Fixes #1034 which cause mysql to hang the connection after 8h
870 ebl Change default statistics target of filename.name and path.path
871 fields for PostgreSQL. This speeds lookup by indexes. Thanks
873 kes A few more tweaks to new reservation code. Make sure to clear
874 vol released flag when retaking volume. When reading label and
875 label is bad mark volume unused. When recycling, mark volume
876 unused so it can be renamed.
878 kes Fix reserve_volume() so it doesn't release a volume in use
879 (i.e. a volume entry not marked released). This should be
880 the last part needed to fix bug #1018.
882 kes Move Heartbeat documentation from Job to Director resource.
883 This fixes bug #1033.
885 kes Fix existing switch drive SD code to call autochanger to release
886 any old volume. This must be done to keep the autochanger from
887 releasing subsequently newly reserved volumes in doing a close().
888 This should fix bug #1018.
889 kes Fail if attempting to get console input in batch mode. This
890 should help fail RunScript console commands that are incomplete.
891 kes First cut implementing switch_drive() in SD (not actually called).
893 kes Implement first cut running console commands in a RunScript.
895 ebl Fixes bug #1028 where 'Selection Type' option was not usable
897 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
900 Release Version 2.2.7
902 kes Add new free_tls() entry point so that Win32 builds.
903 kes Fix compile warning in src/lib/util.c
904 kes Fix entry point for edit_job_codes() so that Win32 builds.
905 kes Fix seg fault Frank Sweetser reports in regression testing
906 on his systems. The problem was that the original author of
907 bsnprintf.c did not take into account the side effects of
908 using ++x in the argument to a #define.
909 kes Make SD protocol backward compatible with version 2.2.x.
911 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
912 because Bacula no longer restores sockets.
913 ebl Always use ignorecase fileset option on win32 FD.
915 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
916 that implements double quoting include names in conf files,
917 and also allows piping input by having the first character
918 be a vertical bar (|).
919 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
920 that implement %f in RunScripts to pass the FileSet name.
921 kes Skip leading | when lex input comes from a pipe as suggested
922 by Michael Stapelberg <michael@stapelberg.de>.
924 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
925 Nerijus Baliunas <nerijus@users.sourceforge.net>
927 kes Implement Plugin Directory and plugin events.
929 kes Implement a security enhancement: TLS authentication but no
930 encryption. Enabled by setting 'TLS Authentication = yes'.
931 Note when this is on, TLS encryption is turned OFF!
933 kes This patch corrects a problem where the maximum concurrent storage
934 jobs counter gets out of sync during restore jobs causing jobs to
935 'wait on max Storage jobs'. This patch fixes bug #1009.
937 kes This patch fixes bcopy so that it produces correct Volumes.
939 kes This patch eliminates spurious output to the console during a VerifyVolume
940 job that contains encrypted data. It fixes bug #1024.
942 kes This patch prevents the 'status dir' command from trying to use a scratch
943 volume and possibly moving it from one pool to another. This patch fixes
946 kes Add new include to postgresql.c suggested by Marc Cousins so
947 that it compiles correctly with pgre version 8.3.
949 kes Fix --archivedir addition to configure. Replace it with
950 --with-archivedir in configure.in This fixes the regression
952 kes This patch fixes bug #1012 where the job is canceled because
953 of Max Run Time exceeded when the job has not yet started.
955 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
956 one 'part' to write. Instead of each part being stored on disk,
957 written to DVD, then deleted from disk, all parts are written to disk,
958 and only the last is written and deleted from disk.
959 kes This patch fixes the status command to include the formating string for
960 JS_AttrInsterting. It fixes bug #1021.
961 kes This patch should fix the Mac OS X build problem on the latest
962 Darwin, where sys/types.h was not included correctly (apparently
963 due to a change in the Mac headers). The solution was to explicitly
964 ensure that it is defined for the ./configure.
965 This patch also has a rebuild of configure that includes the Debian
966 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
967 kes This patch should ensure that queued messages to the console are
968 displayed as soon as possible. It should fix bug 1007, but has been
969 reported not to work.
971 kes This patch fixes the infinite loop when trying to increase the
972 maximum number of volumes in a Pool during the add command.
973 This patch fixes bug #1008.
975 Release Version 2.2.6
977 db Remove extra data on estimate command in joblist for bat.
979 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
980 really change anything, but is the beginning of doing it *right*.
981 To do it completely right the LastWritten date must be passed to
982 the SD, but it is not yet done.
983 kes Minor tweaks to some bat restore SQL.
984 kes This patch fixes bug #1003 where putting the message output from
985 a Verify job into the catalog results in a recursive loop. The problem
986 seems to show up only with postgresql (to be verified).
987 kes Correct %x to %p in postgresql debug statement.
989 kes Fix bug #942 where lots of emails where generated when the heartbeat
990 interval was low and Bacula wanted a different tape from the one in
993 ebl Add new SD despooling attributes and Dir inserting attributes
994 job status codes in the catalog (Status table).
996 ebl Use qmake-qt4 instead of qmake when available (debian system).
998 kes Add a security warning to src/cats/make_catalog_backup.in indicating
999 that passing the password via the command line (arg 3) is insecure.
1000 This responds to bug #990 (it doesn't fix it).
1002 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1003 kes Fix a crash in bat when it cannot connect to the Director for example
1004 if the Director is not running.
1005 kes Remove redundant INDEX (JobId) from File table in the trunk.
1006 This fixes bug #992.
1007 kes Make explicit exception to GPL in LICENSE to permit linking
1008 the Win32 FD with Microsoft VSS code.
1009 kes Apply the Solaris package patch from
1010 Masopust, Christian <christian.masopust@siemens.com>
1011 kes Apply the patch to optionally add a timestamp in the debug output
1012 submitted by Mariusz Czulada <manieq@wp.eu>.
1014 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1015 backend (sql_strerror). Fixes bug #989
1017 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1018 It applied with no problems.
1019 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1020 awk are on the path.
1021 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1022 since the status is returned on stderr on Solaris.
1023 kes Activate Close button on tray-monitor window. This fixes
1025 kes Check for NULL item in parse_conf.c before calling it. In the
1026 case of Device, there is no item and this caused a seg fault when
1027 Device appears in the conf file.
1028 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1029 avoids pulling in config.h multiple times in some new code.
1031 kes Fix spurious warning message printed when creating a volume with
1032 a LabelFormat. This fixes bug #976.
1034 Release Version 2.2.5
1036 kes Add JobId in place of Job name in all the Jmsg() output.
1037 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1039 kes Make maxvol-test and new more strict maxvol2-test work.
1040 kes Print JobId in all Jmsg() job output.
1042 kes Add new SD despooling attributes and Dir inserting attributes
1043 job status codes. This fixes bug 961.
1044 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1046 kes Fix doc issue. This fixes bug #963.
1047 kes Fix listing performance problems in bat. Pointed out by
1049 kes Remove old debug code.
1050 kes Fix bat code that tests for Win32. This should fix bug #968
1051 kes Query 5 list wrong Vol after migration. This fixes bug #960
1053 ebl Fix #969 where user can't change Replace option in restore menu.
1055 kes Save jcr in thread specific data (tsd) for each thread.
1056 kes Make Dmsg() print JobId as -%u.
1057 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1058 for the thread if it exists.
1059 kes Remove old reservation debug jid code.
1060 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1061 ebl Add an option that permit to specify spool size in job
1062 definition. (Applying patches/testing/spoolsize_per_job.patch).
1063 You must upgrade SD and DIR at the same time.
1064 dvl Add new configuration item --archivedir
1065 dvl Adjust regression tests to use tmp not /tmp. This will allow
1066 multiple concurrent runs of the regression tests.
1068 kes Fix race condition that drops final block written to volume.
1069 This happens in rare cases with multiple simultaneous jobs
1070 when the Volume fills. This fixes bug #964. May be related
1071 to bug #935 and possibly #903.
1072 kes Eliminate more strerror() and replace with bstrerror().
1073 kes Remove BSD getopt and replace with unrestricted IBM version.
1074 kes Fix Win32 build for changed calling sequences.
1075 kes More tweaks to the mount volume routines to get everything
1076 right. Changed variable name from find to have_vol, which is
1077 much easier to understand.
1078 kes Enhance btimer debug code.
1080 kes Fix FD->SD authorization failure, which was due to spurious
1081 wakeups from a pthread_cond_timedwait(). Simply check the
1082 predicate before continuing. This fixes bug #953.
1083 kes Add const char where needed (more to do). Remove temp debug code.
1085 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1086 kes Don't overwrite error message in check_tables_version.
1088 kes Unlock batch insert tables with same calls used elsewhere.
1089 kes Allow starting 59 jobs a second.
1090 kes Make SD session key more random.
1091 kes Add retry for SQLite opening db if it fails. Probably helps
1093 kes Suppress extra error messages during batch insert failure.
1095 kes Add jcr to timer packets so if killed message can be sent to job.
1096 kes Add JobId to all Dmsg() output.
1097 kes Put some FD auth code on dbglvl rather than fixed.
1098 kes Return insert attributes error message in db msg buffer to avoid
1099 false error messages. Helps fix bug #966.
1100 kes Separate batch init error messages. Probably helps fix bug #966.
1101 kes Make SD code that contructs attribute insert check string lengths
1103 kes If Dir gets an error during inserting attributes, cancel SD.
1104 This reduces unnecessary error messages.
1106 kes Correct search boolean for getting Volume info
1107 ebl Cleanup batch insert code. Probably fixes bug #965.
1108 kes Back out one small change to the reservation system (reserving a volume).
1109 kes Rework how a Volume is mounted. It is now much more intelligent and
1110 will always attempt to use any mounted volume if possible and reduces
1111 calls to the Director asking about volumes.
1113 kes Turn off some code when batch insert not enabled.
1114 kes Edit FD name in connect error messages.
1115 kes Rework the reservation system to take into account that the Director
1116 might give us a Volume that is different from the current one being
1117 used, and to ensure that we don't exceed Maximum Volume Jobs.
1118 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1119 fatal error with multiple jobs running'
1120 kes Add more debug code in reservation system.
1121 kes Implement maxvol-test to check bug #947.
1123 kes Add code to handle tray monitor separated from Win32 FD.
1124 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1126 kes Add missed return in fixing verify bug -- trunk only.
1127 ebl Fix a command parser issue causing a director segfault.
1128 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1129 This fixes bug #954.
1130 kes Increase the max block size to 4MB fixes bug #957.
1131 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1132 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1133 is not properly mounted (recognized) during a poll.
1134 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1135 Job that has differences reports Verify OK.
1136 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1138 ebl Add an option to operate on all pools with update vol parameters.
1139 This complete the project 20. Patch from Nigel Stepp.
1140 ebl Add history support to bconsole when using readline.
1141 Using Ctrl-D to exit doesn't update .bconsole_history
1142 kes Modify new volume algorithm to use max MediaId for generating next
1143 volume number rather than the count of Volumes. This should essentially
1144 eliminate the failure rate if some volumes were deleted. Bug #921.
1145 kes Begin implemention of Optimize Job Scheduling.
1146 kes Implement restore callback that Dirk and I agreed on for bat
1147 restore. This fixes bug #928. Restore of backup of zero files fails.
1148 kes Fix SQL Catalog logging which broke with new db_escape_string
1151 Release Version 2.2.4
1153 kes Fix bacula_cats.def for new db_escape_string().
1154 kes Increase size of name string when FD making connection to SD.
1155 May fix bug #953. FD->SD connection failure.
1157 kes Add code to help Dan debug 2drive-incremental-2disk test.
1158 kes Add code to try to fix bug #908.
1159 kes Add waits to multiple exit detection code to try to force pid
1160 file to always be deleted.
1161 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1162 This fixes bug #950.
1163 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1164 trying to switch drives by checking for blocking before unblocking.
1166 kes Cancel storage daemon in all cases where FD reports error. This
1167 should fix virtually all cases of bug #920.
1168 kes Fix db_escape_string() for MySQL which did not compile.
1170 kes Fix error message that was clobbered when Dir tells SD it does not
1171 have write permission on Volume. This should fix a minor point
1172 in bug #942, but not the main problem.
1173 kes Add code to cancel job in SD if FD connection fails. This should
1175 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1176 dvl Pass jcr and db into db_escape_string() to enable better escaping
1178 kes Fix migration code to get correct Volume name with multiple volumes
1179 by skipping |. Fixes bug #936.
1180 kes Implement patch supplied by Landon to fix bug #944 where using
1181 TLS with bconsole uses 99+% of the CPU.
1182 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1184 kes Move patches into patches directory.
1186 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1189 ebl Using 'm' in bconsole will show messages like before,
1190 and not memory usage.
1191 kes Fix bug #935, and probably also bug #903 where files were not
1192 restored. MediaId was not properly set in JobMedia record after
1195 kes Suppress chown and chmod error messages if the FD is not running
1198 kes Apply Martin Simmons' patch that should turn off the new API usage
1199 when batch insert is turned off allowing building on older
1201 kes Add ./configure search in qwt-qt4 for qwt package
1203 kes Bacula is now free of 3rd party GPL copyrighted code!
1204 kes Remove idcache.c
1205 kes Add guid_to_name.c/h which replace idcache.
1206 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1208 ebl Detect if new PosgreSQL batch insert API is present.
1209 kes Correct incorrect mempool call causing Director crash. Occurs on
1210 systems without va_copy().
1211 sb Update spec files for 2.2.1 release
1213 kes Fix memory pool call in ua_output.c. bug #934.
1214 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1215 Add test program to fnmatch.c
1217 kes Integrate patch to README.vc8 from
1218 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1219 edit it to get it into Unix patch format.
1220 kes Implement mkpath.c to replace old FSF makepath.c
1222 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1224 Release Version 2.2.1
1226 kes Update POTFILES.in
1227 kes Cleanup a few underquoted AC_DEFUNs in configure
1228 kes Apply patch from Martin Simmons that adds a test for va_copy to
1231 kes Fix bug #921 by increasing the number of tries to create a new volume
1233 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1234 can be called multiple times. Implement a version for machines
1235 without va_copy() that gets a big buffer.
1237 kes Integrate more portable zone offset code into bsmtp.c
1238 Submitted by Attila Fülöp.
1240 kes Fix bad SD->FD return status reported by
1241 (James Harper) <james.harper@bendigoit.com.au>
1242 ebl Fix a bug in read_close_session which return random status
1243 thanks to James Harper
1245 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1246 and directory names during restore of single file/directories.
1247 kes Add sanity checks to .sql command when string is empty. Hopefully
1248 that will resolve Dirks Director crash.
1250 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1251 in the bsmtp chat subroutine when debug is >= 10.
1253 kes Fix Director crash when running bat SQL queries.
1254 kes Add David's notes on Item 8: Copy pools.
1256 kes Rework projects file to be current and ready for a vote.
1257 kes Enhance lex scanner error message.
1259 kes Tweak LICENSE file to mention BSD code.
1260 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1261 if specified on the ./configure.
1262 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1263 This class is intended to allow us to open a second bsock to the
1264 Director while in the restore subdialog.
1266 kes Fix configure to create bat Makefile before creating dependencies.
1267 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1268 kes Add a tooltip to the tray monitor.
1269 dvl Set the Director's PID file before dropping privs. This fixes
1272 kes Update AUTHORs file
1273 kes Increase the default max concurrent jobs to 20 in FD and SD to
1274 correspond with the default .conf files.
1275 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1276 some different, of the same file created by RN when porting the
1278 kes Rearrange some of the Win32 directories and the placement of the files
1280 kes Set DEVELOPER flag in version.h
1282 ========================================================================
1283 Release Version 2.2.0
1285 kes Apply a second doc patch from Marc.
1286 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1287 improves the tips section that discusses how to setup multiple
1290 kes Update bat README file.
1291 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1292 corrects a typo in the Recycle status check in db_find_next_volume().
1293 This will probably fix a number of annoying problems with multiple
1295 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1296 bnet calls -- no functionality change.
1298 kes Modify the Verify output to specify if files are missing on
1299 the Volume(s) or disk. Fixes confusion in bug #916.
1300 kes When more than one Volume is read in a migration job, the last
1301 Volume bytes reported are from the last read volume rather than
1302 the last written volume. Fixed. This fixes bug #910.
1303 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1304 It previously printed New Recyle flag is: no. This fixes bug
1307 kes Correct seg fault when switching tape drives during restore.
1308 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1309 be used until after 2.2.0 release.
1311 kes Remove fnmatch() in SD that permitted wild card specifications.
1312 This fixes bug #914.
1314 kes Fix %g in filename returned by SQL for browse tree reported by
1316 kes Fix configure so that it puts config.out in the cwd rather than
1318 kes Attempt to fix the locking problem reported by Eric in bug #906.
1319 kes Make berrno class to leave errno unchanged after constructor call.
1320 kes Make bnet_server use the heap rather than the stack to allocate
1321 its socket fd pointers to avoid a crash at termination. Problem
1322 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1324 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1325 and putting it in depkgs-qt along with Qt4.3.
1327 kes Rework code in acquire.c that switches drives for reading when
1328 the Media Type does not match. This should fix bug #906
1330 ebl Fix a director segfault during job setup #907
1331 kes Correct seg fault in postgresql when first operation returns no
1332 rows. Fixes Dirks File browser problem seg fault with bat.
1334 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1335 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1338 kes Implement PopUp YES/NO dialog for bat.
1340 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1342 kes Correct RunScript to terminate job in FD on failure.
1343 kes Change abort_on_error and AbortJobOnError to fail_on_error
1344 and FailJobOnError in RunScripts.
1345 kes Minor tweaks of code formating in RunScripts, principally to
1346 avoid depassing 80 columns.
1348 kes Eliminate one #ifdef Win32 in bsmtp
1349 kes Implement grow tool to grow a file for testing very large databases.
1350 kes Add big-vol-test to test Bacula seeking with > 5GB.
1353 kes Modify find_next_volume() to return all values in Media record.
1354 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1358 kes Update Release notes
1360 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1361 Warning, in previous beta version, all media get from scratch keep their
1364 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1365 This should fix bug #842. Made a note to look at removing the temp
1366 files at the end of the install.
1367 kes Add ability to mount and unmount a file device providing it is
1368 marked as being removable and has the appropriate mount and unmount
1369 commands defined in the Device resource. This fixes bug #830.
1370 kes When applying a storage override, release all previous storage
1371 definitions rather than just prepending the new storage.
1372 This should prevent a good deal of confusion.
1374 kes Implement ./configure search for qwt libraries.
1376 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1377 Win32 FD. This should fix bug #893.
1378 kes Remove an unnecessary beep in Win32 init code.
1379 kes Update copyright dates in Win32 executable about boxes.
1380 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1381 code with a BSD getopt.c and getopt.h.
1382 kes Remove sched.h from the Win32 compat directory -- not used.
1383 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1384 need to shut it down, do it through the services panel or the command
1386 kes Remove some inappropriate Bacula FSFE copyrights.
1387 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1388 kes Fix regress config non-portable test as pointed out by
1389 Florian Heigl <florian.heigl@gmail.com>
1390 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1391 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1393 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1394 Reported by Frank Sweetser.
1398 kes Fix client-only build.
1399 kes Integrate client-only fixes for bsys (initgroups) and conio from
1400 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1401 kes Make arguments to get_scratch_volume() in same order as other
1403 kes Rework the prune_volumes() subroutine so that after purging and
1404 no volume found in desired pool, it will check for a scratch
1405 volume. This prevents recycling the whole scratch pool.
1406 kes Add code to status storage to print boffset_t (largefile support).
1408 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1409 kes You now need a --with-qwt=<dir> to be able to build bat.
1410 kes Update src/win32/cats/bacula_cats.def to include the new
1411 db_get_query_dbids() call on Win32.
1413 kes Correct a problem when selecting a scratch volume and moving
1414 it to another pool that lost some columns.
1415 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1416 kes Enhance Autochanger error messages to include Volume and device name.
1417 kes Rework prune_volumes() code to take account of InChanger flag,
1418 and to handle recycling volumes going to the Scratch pool and
1419 current pool because the RecyclePool directive.
1420 kes Implement a better and more efficient db_get_query_dbids() to
1421 handle creating and passing back a list of DBIds.
1425 kes Start work on new more efficient DBId subroutine. First use
1426 will be for recycling volume to Scratch inchanger.
1427 kes Increase number of JobIds in pruning from 1000 to 10000.
1428 This to be replaced by above routine.
1429 kes Begin implementation of building Qt4 on Win32.
1430 kes Correct typo in fix I added for bad TLS shutdown.
1431 kes Pull 2.0.3 patches into patches directory.
1432 kes Update Release notes. Include qt-console in line count.
1433 kes Update Projects file.
1435 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1436 bug in migration code where a job that spanned two volumes
1439 kes Implement new BST_DESPOOLING blocked state. Change from locking
1440 during despooling in SD to blocking. This means that other threads
1441 can work with the device structure, in particular the reservations
1442 system while despooling.
1444 kes Fix return in reservation message queue that missed clearing
1445 the jcr lock (implemented 26Jun07 below).
1446 kes Rename a number of dev methods to make locking function names
1448 kes Document locking in lock.c. Move lock structures to new file
1451 kes Move reservations message lock to lock jcr only this
1453 kes Move main SD locking code into lock.c (new file).
1454 kes Update Win32 build to include lock.c
1458 kes Dirk committed the qwt library code for drawing graphs in bat.
1459 kes Tweak install of qwt so that it is integrated with ./configure.
1461 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1462 out by Eric (my typo).
1463 ebl Fix configure.in to get batch mode enable
1464 kes Return correct string from authenticate.cpp in bat when connecting
1466 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1467 spurious line drops when using TLS.
1468 kes Do not file reparse points when restoring a file that already
1471 kes Implement Windows reparse points -- similar to directories, but
1472 we do not descend into it. This is a first cut. They seem to
1473 be backed up, but restore is not yet tested.
1474 kes Remove restore_blocking in tls code when shutting a socket to leave
1475 it in blocking mode. Hopefully this will fix the encryption bug
1476 reported by Frank Sweetser.
1477 kes When opening a file for backup, tell the OS that we are going to
1478 read it sequentially -- optimization.
1479 kes Change variable names in authenticate_director() to not conflict
1480 with member names in bat. Caused great confusion with compiler,
1483 kes Queue openssl error messages in case of comm problem.
1484 kes Do shutdown() call if socket terminated.
1485 kes Remove some duplicated code in tls.c
1486 kes Move more of the bsock member variables into private and access
1488 kes Add Frank Sweetser's tls-test to the regression suite.
1490 kes Add Swedish sv.po file
1492 kes Don't print clock skew message in FD if less than 3 seconds diff.
1493 kes Add a bit of VSS info to status client.
1494 kes Implement a first cut of Vista VSS, using Win2003 code.
1496 Release: 2.1.20 beta
1498 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1499 loaded tape but uses first drive).
1500 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1501 This was indeed a Win32 issue.
1503 kes Simplify search of autochanger for in-use Volume.
1504 kes Fix exit condition of check for in-use volume. kes Remove
1505 inappropriate my_postgresql_free_result() in db_close()
1507 kes Fix bad return in FD when encryption signature not found.
1508 Probably caused a crash.
1509 kes Inhibit missing encryption signature error messages for
1510 file types where no signature computed.
1511 kes Correct inverted check on autochanger in reservation system.
1512 kes Tweak debug code in autochanger reservation.
1514 kes Add some additional locking in the cats directory in subroutines
1515 that modify packet variables called from batch insert.
1516 kes Rework how dcrs are allocated. new_dcr() can now be called
1517 with an existing pointer, and it will simply clean it up.
1518 This allows the reservation system to test various different
1519 devices, and will permit easy device changes.
1520 kes A bunch of changes all over to handle new new_dcr() calling
1522 kes Work more on the Volume management in the SD. Remember Volumes
1523 for tape drives and for autochangers (even virtual disk changers).
1524 kes When looking at the Volume list to reserve a drive, handle
1525 autochanger names correctly by interating through the changer
1526 devices. Also call the Director to see if a Volume is suitable
1527 for the current job.
1528 kes Fix some bugs in bscan. Make sure all media records are written.
1529 Make sure that valid JobMedia records are written for disk files.
1530 Previously they were completely wrong.
1531 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1532 that the URLs don't change and so that the developers will all
1533 work off the same copy. Rebuild from scrach.
1534 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1536 Release: 2.1.18 beta
1538 kes Fix seg fault in FD from incorrect digest size.
1539 kes Fix argument to non-OpenSSL crypto.c subroutine.
1541 Release: 2.1.16 beta
1543 kes Remove a few malloc()s from the encryption code.
1544 kes Use the class calls to bsock in filed/backup.c and restore.c in
1545 place of the old bnet_xxx code.
1546 kes Implement code that does an on the fly calculation of the
1547 signing digest during restore of encrypted files. It makes
1548 a best guess at the algorithm, and if it is not correct, will
1549 then revert to the old code which reads the file after it is
1551 kes Implement at least one missing crypto stream in stream_to_ascii()
1552 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1553 #877 where a reload with bad syntax causes Dir to exit.
1555 Cut: 2.1.14 beta (not released)
1557 kes Do not free a volume on a tape drive until another volume is
1558 mounted and read, or the autochanger unloads the volume.
1559 This should help the SD re-use volumes that are already mounted,
1560 and should fix bug #886.
1561 kes Apply patch from user brettedgar that allows gnome2-console include
1562 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1563 kes Apply patch from Lucien Weller that fixes day of week calculation
1564 because of DST flag problem. Fixes bug #887.
1566 kes Move find_next_appendable_volume() to after acquiring a valid device
1567 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1569 kes Unable to reproduce bug 872. However added additional testing for
1571 kes Bug #874 resolved by documenting SQLite limitations.
1572 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1573 kes Bug #881 resolved by removing typo in mtx-changer script.
1574 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1575 approval. Added a link to the wiki on the web page, and implemented
1576 a backup from http://paramount.ind.wpi.edu
1578 kes Fix update allfrompool to pass pool name.
1580 kes Convert to pure GPL v2 license.
1581 kes Fix sscanf problems reported by Peter Buschman that caused
1582 a bus error on Solaris.
1583 kes Rework (simplify) the select prompt in bat.
1584 kes Move get_jobid_from_tid() into lib and create a
1586 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1587 should definitely fix the problem of lost error messages in the
1589 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1590 kes Eliminate tcpd.h from the project. Enclose the #include from the
1591 library with extern C ...
1592 kes Add print of signal name when a signal is trapped.
1594 Release: 2.1.12 beta
1596 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1598 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1599 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1600 makes SQLit3 run 30 times faster, though a bit less safe.
1601 kes Implement --with-batch-insert in configure and detection of thread
1602 safe libraries. It is on by default, but turned off if no thread
1603 safe library (e.g. SQLite 2) is available.
1605 kes Fix Bacula PostgreSQL buffer overruns.
1606 kes Do better checking for NULL results returned from PostgreSQL;
1607 implement retry for failed queries; clear results buffer after
1608 failed query. Hopefully this will correct the PostgreSQL failures.
1610 kes Implement algorithm to handle only one appendable volume with
1611 Prefer Mounted Volumes = no.
1612 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1613 returned from a query.
1614 kes Make volume lock recursive.
1615 kes Implement an additional volume reservation algorithm that
1616 starts by considering all reserved volumes then uses the
1617 old brute force algorithm of searching the resources to
1618 find a suitable device.
1619 kes Add new reservations debug code and refine the old code.
1620 kes Update the win32/dll/bacula.defs file.
1622 kes Tweak reservations algorithm to permit a few more cases, i.e.
1623 volume reserved, but on different drive, ...
1624 kes Enhance SD status to include Pool and Media Type for drive in a
1625 more readable format (a bit longer).
1626 kes Fix PostgreSQL double free.
1628 kes Minor refactoring of restore decryption code.
1629 kes Add code to smartall.c to detect double free of a buffer.
1631 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1632 so that bsmtp will create a correct email address (mailbox only).
1633 kes Modify 'memory' command so that the buffers are listed as 'In use'
1634 to avoid confusion with Orphaned buffers.
1635 kes I reworked the OpenSSL include/lib flags to be handled in
1636 the standard Bacula way, which should fix bug #863 concerning
1637 non-standard OpenSSL libraries.
1639 kes Implement Help Browser window for bat.
1640 kes Fix reload bug that reset StorageId to zero.
1642 kes Fix TLS #ifdefing when TLS turned off.
1643 kes Ensure that when labelling a tape with Slot=0 that InChanger
1645 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1647 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1648 add DISTINCT (required by PostgreSQL).
1649 kes Implement BSOCK authenticate_director() method. Eventually will
1650 authenicate all daemons.
1651 kes Move several more functions into the BSOCK class.
1653 kes Add code to tell the OS that we no longer need a cached
1654 file that we were reading. In findlib/bfile.c. Also,
1655 only cache files that we are reading. Thanks to
1656 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1657 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1658 kes Implement script to automatically generate cats and dll .def
1659 files for Win32 dll.
1660 kes Update README.mingw32 to include new .def file generation.
1661 kes Correct typo in UTF-8 error message as reported by:
1662 jhernandez <julianhernandez@gmail.com>
1663 kes Add additional sm_check() code on debug level 1.
1664 kes Set default debug level to 1.
1665 kes Trap SIGABRT in attempt to get traceback.
1667 kes Reduce bat connect timeout from 30 to 15 seconds.
1668 kes More restructuring and implementing BSOCK class in place of
1670 kes Remove a few unnecessary malloc() tests in crypto code.
1671 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1672 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1673 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1675 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1677 kes Fix Verify InitCatalog. The attributes were not pointing to the
1678 correct saved location.
1679 kes Implement message callback so that GUI is sure to get all
1680 daemon messages. Currently displayed in a dialog in bat.
1681 kes Ignore SIGUSR2 (Bacula timer) in bat.
1682 kes Apply regress patch from bug #859 to allow regress to work
1683 with Solaris compiler.
1685 kes Begin adding TLS support to bat.
1686 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1687 clean up lex.c and make it more readable.
1689 kes Move more bnet functions into the BSOCK class.
1690 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1691 kes Complete change of berrno strerror() method to bstrerror()
1693 Release: 2.1.10 beta
1695 kes Cleanup incorrect email addresses in bsmtp.
1696 kes Make bat display initial messages rather than discard them.
1698 kes First cut of adding .mod to the run command.
1699 kes Implement auto display of messages in bat.
1700 kes Enhanced preferences to allow all Bacula output to be
1703 kes Try to make bsmtp date routines more generic.
1704 kes Fixed bug #856 autochanger documentation.
1705 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1706 kes Add new cats entry point so Win32 builds.
1708 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1710 kes Do better checking for the MySQL 64 bit libraries looking for both
1711 .a and .so libraries.
1712 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1713 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1714 kes Require the thread safe version of MySQL during configure. Thanks
1715 to Andre Noll for pointing this out.
1716 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1717 continuing in migration code.
1718 kes Apply implementation of tray-monitor font derived from gnome-console
1719 submitted by Andreas Piesk <a.piesk@gmx.net>
1721 kes Eliminate important memory loss in SQLite
1722 kes Fixed the batch insert MySQL thread specific data that was not
1723 being freed. See cats/mysql.c:db_thread_cleanup().
1724 kes Fix restore before command.
1725 kes Convert old hdr.name to name() in a few places.
1726 kes Implement update jobid command.
1727 kes Return all time_t dates in db_get_job_record()
1728 kes Stop watchdog in SD earlier.
1729 kes Put Pool just after Storage in please mount message.
1730 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1733 kes Update the po files.
1734 kes Fix Verify InitCatalog by making it cache attributes.
1736 kes Change name bacula-bat to bat for man 1 page to correspond to
1738 kes Check for client and store NULL pointers in status command. This
1740 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1741 kes Fix sign extended editing of %p.
1742 kes Clean out a little old #ifdefing in cats/mysql.c
1744 kes If time diff between DIR and FD is more than 600 seconds convert
1745 INFO message to WARNING.
1746 kes Implement heap size display in status for all daemons.
1747 kes Attempt to fix MySQL db open memory loss (not successfull).
1748 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1749 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1750 Query. This looks like a MySQL but but by doing extra releases,
1751 the memory goes away. This should fix bug #847.
1753 kes When backup fails, cancel SD before waiting for sd termination.
1754 kes If SD is waiting for FD to connect during cancel, wake up the
1756 kes Fix fsf code so that errno is correctly reported.
1757 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1759 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1760 so that Bacula doesn't later stumble into a seg fault.
1761 kes Use the term Restore Client in the restore Job report.
1762 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1763 the original job's FileSetId.
1764 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1765 spooling in migration jobs. Not yet tested.
1766 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1767 reading conf file from a pipe. However, do it with open_bpipe()
1768 rather than popen. Not yet tested.
1770 kes Fix an ugly bug where the VolCatBytes were getting updated
1772 kes Implement bconsole memory command that prints current memory
1773 usage, plus smartalloc dump.
1774 kes Clarify some error messages in backup, admin, and migrate.
1775 kes Shrink label dialog to smaller size.
1776 kes Invert Cancel OK buttons on restore to be OK Cancel.
1777 kes More strerror() to bstrerror() conversions.
1779 kes Start implementing bstrerror() in place of strerror().
1780 kes Stripping path -- seems to work.
1782 kes Prevent door and port files from being restored (mostly
1784 kes Free an unreleased buffer in compat code.
1785 kes Change console Job name from *Console* to -Console- to eliminate
1786 Win32 filename problems. Put Win32 path separator when creating
1787 Console file. This fixes bug #846.
1788 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1790 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1792 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1793 to force Win32 error message.
1795 kes First cut strip path. The data should be passed to the FD,
1796 but nothing is done with it yet.
1797 kes Enhance the digest and signature routines in the crypto
1798 library to accept a JCR and to use it to print error messages
1799 so that they will go in the Job report rather than the daemon's
1801 kes Simplify some of the verify signature code.
1802 kes Simplify a few of the alternative returns in the signature
1805 ebl Use only POSIX regex instead of GNU regex in breg.c for
1806 File relocation. It fix broken freebsd compilation.
1807 kes Convert all other Dir files to use new ua class message
1809 kes Tentative fix for missing digest signature in bug 807.
1810 kes Correct handle problem in new win32_ftruncate routine.
1811 kes Convert ua_purge.c and ua_update.c to use new ua class
1812 message routines for bat.
1814 kes Correct incorrect installation of LICENSE in Win32 installer.
1815 kes Display LICENSE at the beginning of the Win32 install.
1816 kes Attempt to correct the need for the png files to be installed
1818 kes Reapply my bat.conf install script in qt-console. I think I
1819 editted bat.pro instead of bat.pro.in and it was lost.
1820 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1821 the /var/lock/subsys for subsysdir. Also corrects typos in the
1824 kes First cut update job.
1825 kes Correct configure to include qmake of src/qt-console directory.
1827 kes Make restore job yes/mod/no print in one command so GUI works.
1828 kes First cut implementing backup and restore client.
1829 kes Correct editing in Verify output that caused a seg fault.
1831 kes Insure that bat.conf is not overwritten during installation.
1832 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1833 while I was implementing migration in March 2006 !
1835 ebl Cleanup file relocation, using char *RegexWhere instead of
1836 char *where + bool where_use_regexp
1837 kes Update some manpages and add bat manpage.
1838 kes Make a first cut at converting bacula.spec.in for bwx-console
1840 kes Apply patch from John Goerzen to add hostname as fourth argument
1841 to make_catalog_backup script.
1842 kes Fix typos I introduced into bsmtp.c
1843 kes Make pm_strxxx() routines handle input of NULL pointer. This
1844 is to protect from NULL pointers returned from SQL databases.
1845 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1846 kes Add more debug to FIFO code -- fix fifo regression test.
1848 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1849 kes Add thread timer to bnet_connect() to break from OS if wait time
1852 kes Update Win32 build to include new files, new symbols, and
1854 kes Implement socket level heartbeat (tcp_keepidle)
1855 ebl Commit File relocation patch
1856 kes Make bat have 'make install' target.
1857 kes Warn during install if old gnome-console binary found.
1858 kes Warn during install if old wx-console binary found.
1859 kes Add -8 option to bsmtp command line to add content type utf-8.
1860 Fixes bug #809. (Character coding problem in bsmtp).
1861 kes If < is found in target (from, to, cc) then do not enclose the
1862 target in < > in bsmtp. Fixes bug #772 (malformed address).
1863 kes When printing certain items in dbcheck, stop after 300000.
1864 Fixes bug #822. (dbcheck loops).
1865 kes Incorrect status in Dir after waiting for mount with poll set.
1868 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1870 kes Print waiting to reserve a device every 5 mins.
1872 kes Don't call close_part in label.c if tape and relabel.
1873 kes Don't free volume if busy in close() -- should help with
1875 ebl Fix #824 RunScript bug (After script could be execute twice)
1876 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1877 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1878 Add a regression script to test RunScript
1880 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1883 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1884 deprecated. No additional bugs will be fixed, and they will be dropped
1885 in a future release (probably 2.4.0).
1886 kes Change name of wx-console to bwx-console to make it more Bacula
1888 kes Change the name of gnome-console to bgnome-console to make it
1891 kes Some time in March, a Feature Request with patch from Jorj Bauer
1892 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1894 The ability for the director to validate a Client (FD) CN against
1895 an arbitrary set of patterns rather than the hostname, with
1896 A new 'TLS Allowed CN' set of directives which are implemented
1897 in the Client resource. Then pattern matching is used in place
1898 of hostname matching against the Certificate's CN. As an example, we
1899 have certificates which (a) use a local CA, and (b) have a CN of the
1901 kes Add new/changed entry points to Win32 build
1902 kes Create unaccepted-projects for projects that are not accepted.
1903 kes Simplify locking in the reservations system.
1904 kes Add more debug code in reservations.
1905 kes Make sure error condition on reserving a volume is handled correctly.
1906 kes Correct handling of volume_in_use.
1907 kes Correct handling of initializing a device.
1908 kes Move handling of broadcasting releasing a device into release_device().
1909 kes Correct attaching dcr to dev so that it is only done if device
1910 is properly initiated.
1912 kes Locking debug level tweaks in SD.
1913 kes Tweak new Volume code.
1915 kes Add exec external-command [wait-seconds] to bconsole. This
1916 executes the external-command. Note! normally external-command
1917 should be enclosed in double quotes.
1918 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1919 it should normally be off in a production system.
1921 kes Implement die command for SD so that we can force it to dump.
1922 kes Implement SD lock debug code.
1923 kes Implement new algorithm for keeping Volume list in SD. It
1924 is now owned by the device.
1926 kes Implement new code for freeing in use volumes that should
1927 resolve if not all, some of the problems of multiple drive
1928 tape conflicts described in bug 801.
1930 kes Fix gui/bacula-web/images files in svn.
1931 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1933 ebl Fix a bug in batch mode (in string escape)
1934 kes Correct migration prune SQL typo that crept in in a
1935 recent 2.1.x change.
1937 kes Move bnet_despool() into class in bsock.c
1938 kes Modify job report to include director name and Build OS.
1939 kes Move drop root privilege and check_catalog() before fork.
1940 kes Add update database scripts (version 9 to 10) to updatedb directory.
1942 ebl Check size and age of each file after its backup to see if
1943 it has changed during backup, if 'checkfilechanges' is set.
1944 The FD will do an extra check (stat(2)) after
1945 each file backup. mtime, ctime and size are compared with
1946 'before backup' information. If time or size mismatch, an
1947 error message will be generated. You must upgrade FD to use it.
1949 kes Make database name and user configurable
1950 --with-db-name=xxx --with-db-user=xxx
1951 kes Add back database type to message.c for debugging.
1953 kes Implement dir_sql() which issues an SQL query.
1954 kes Modify bat medialist to use dir_sql() and do some minor C++
1955 formatting as well as eliminating a number of pointers, simplifing
1958 kes Fix some of the mtx-changer grep commands for tape label readers.
1959 kes Convert a number of bsendmsg into the appropriate send/warning/error
1960 message class calls.
1961 kes Suppress the using database message in the .sql command.
1962 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1964 kes Add context menu for floating a window.
1965 kes Some minor cleanup and name changes in qt-console
1966 kes Add doing mt setblk 0 in Win32 mtx-changer.
1967 kes Apply Martin's bug fix to move definition of ENODATA for
1969 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1970 sqlite2 and sqlite3.
1972 kes More pruning cleanup.
1973 kes Turn on wait_for_drive by default in mtx-changer.
1974 kes Turn on Batch insert code by default as it now passes regression.
1975 kes Add ./configure --enable-bat to enable building of Bat.
1976 No install yet though.
1978 kes Implement a new .sql command for bat.
1979 kes Implement code to turn off pruning in obtaining the next volume.
1980 Pruning is turned off for the status dir command, but turned on
1981 for SD requests and for the list nextvolume command.
1983 kes Correct Qmsg() that was not updated correctly when committing a
1984 previous change (probably the recent TLS patch).
1986 kes Write new subroutine is_volume_purged() that explicitly checks
1987 if the Volume is purged, and if so marks it as such. This should
1988 resolve problems reported about needing to mount twice to recycle
1990 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1991 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1992 amount of duplicated code.
1993 kes Do volume pruning only for the Media Type desired (reduces pruning time
1994 if multiple Media Types are in the same pool).
1995 kes Implement more detailed info in the Job report for the Bacula version
1997 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1999 ebl Add bbatch tool to bench database and insert mode.
2000 Fix sql quote stuff in batch mode
2001 Fix sql stuff for mysql
2003 kes Correct problems with am/pm scheduling. Fixes bug #808.
2004 kes Implement new prunning code that prunes up to 1000 jobs at
2005 the same time. The same technique can be applied to a number
2006 of other prune/purge subroutines.
2007 kes Add an insanity check when starting a new tape job to ensure
2008 that the tape position has not been changed. If so fail the
2010 kes Fix Win32 build for dlls to add the folllowing:
2011 src/lib/bsock.c -- new file with new entry points
2012 src/lib/dlist.c -- new entry points
2013 src/cats/sql_create.c -- new entry point
2014 src/cats/sql_cmds.c -- new DATA item exported
2016 ebl batch mode cleanup bscan-test is ok now.
2017 kes Implement SD code to check length of disk volume before appending.
2019 kes Correct return status on db_batch... routines.
2020 kes Add call to db_write_batch_file_records() to migration code.
2021 ebl Fix AfterJob timing
2022 kes Move the checking of the database in initializion of the Director
2023 to after we drop privileges. This avoids the need for both root
2024 and bacula access to the DB.
2025 kes Correct a misplaced variable definition in src/filed/backup.c
2026 kes Correct how the new batch insert db_create_attributes_record()
2027 uses the arguments. Caused a seg fault in bscan.
2028 kes Implement lock() and unlock() methods in DEVICE class.
2029 Implement block() and set_block(xx) methods in DEVICE class.
2030 kes Modify bnet_connect() so that it uses time() to check for the
2031 wait time expiring (on some OSes, some system calls may not
2032 return immediately).
2033 kes Modify Verify to obtain the previous JobId when it is actually
2034 running rather than at schedule time (as it was in 1.38.x).
2035 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2037 kes When checking pid in pid file, continue running if the pid is
2038 the same as ours. This occurs on IRIX after a system crash.
2041 kes Extend new GUI API.
2042 kes Make the ua structure a class, and implement send_msg(),
2043 error_msg(), warning_msg(), and info_msg().
2045 kes Apply fix from for building wx-console on the Mac from
2047 kes Implement new select mechanism for GUI programs.
2048 kes Reorganize initialization of stackedWidgets in bat.
2050 kes Add updated nagios plugin supplied by Christian Masopust.
2052 kes More bat implementation.
2053 kes File migrate bug with Pool Occupancy using mediaid instead
2054 of jobids. Fixes bug #795.
2055 kes Fix orphaned buffers in filed backup and verify due to
2056 crypto buffers not freed during errors. Fixes bug #789.
2057 kes Extend new GUI api code to tree commands.
2058 kes Ensure that tree and dot commands check console ACLs.
2059 kes Permit marking directory with trailing slash.
2060 kes Allow 20 console connections (instead of only 10).
2062 kes Add smartctl call to bacula-sd.conf as an example of getting
2065 kes Modify jobq.c to let simultaneous restore jobs run. This may
2066 cause them to fail if they cannot get a drive.
2067 kes Add Client Connect Wait to Storage daemon to permit users to
2068 modify the time the SD waits for a FD connection.
2070 kes Correct virtual changer check which was backwards. This caused
2071 volumes to be unloaded into slots already occupied.
2073 kes Apply Command ACL filter to JobId list in restore command.
2074 kes Correct typeo in var.c patch.
2076 kes Don't let Bacula prune File or Job records for the current Job.
2077 kes Fix variable substitution pad + inc bug reported (with patch)
2080 kes Correct SQLite log table index as reported by Luca Berra.
2082 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2084 kes Begin implementing new comm signals for API.
2085 kes Fix a few places in lib/message.c where the open fd may
2087 kes Continue implementing lib/bsock.c (real class). Make jcr,
2088 who, host, and port private. There are new methods to access
2089 them for non-class use. This required touching a number of files.
2091 kes Add LANG=C to autoconf/randpass so it works with languages other
2092 than English. Fixes bug #788.
2094 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2096 You will not be able to generate Include/Exclude list any more.
2097 It will be fixed soon.
2098 If you want to use this, you can apply
2099 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2101 kes Restore of sockets created false error messages because Bacula
2102 no longer restores sockets, but the code was still trying to
2103 set the attributes on a non-existent file. Reported by a user.
2104 ebl finish RecyclePool feature
2105 Media will takes Pool.RecyclePool
2106 when moving from Scratch to a Pool or when user will do
2107 update volume=xxx frompool
2108 To use it, add RecyclePool = aPool to your Pool resource
2111 RecyclePool = Scratch
2115 kes Expand new BSOCK class adding signal() and new BNET signals.
2116 kes Begin enhancing the dot commands adding a new API function
2117 that returns more information and will make it easier
2118 to interface to the Director from a program.
2120 kes Make DEVICE fd private. Its new name is m_fd, and can be
2121 obtained with dev->fd() outside the class. This is the
2122 first of many DEVICE members to be made private.
2123 kes Implement Michael Renner's idea on having a virtual disk
2124 changer. I made some minor modifications (e.g. I did not
2125 implement the Virtual Changer directive, but simply set
2126 the Changer Command to an empty string.
2128 kes Implement a BSOCK send() method that writes the whole record
2129 in a single write() request rather than in two.
2130 ebl add update volume=xxx recyclepool=yyyy
2131 volume takes recyclepool from pool when using update volume=xxx from pool
2133 kes Fix encryption deblocking bug, which caused some restored files
2134 to be truncated. This fixes bug #763.
2135 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2136 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2138 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2139 ebl Use btime_t instead of uint64_t in media patch.
2141 kes Optimize the use of the database a bit in the Status dir command.
2142 Only open it when needed, ensure that if any previous database
2143 was opened, it is closed.
2145 kes Correct VolCatBytes bug from media patch.
2146 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2147 in the case of orphaned records.
2148 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2149 and File records in 300K chunks to be more efficient. This
2150 idea came from Juan Luis Frances (if I remember right).
2151 kes Apply Eric's scratch patch that moves a purged Volume to
2152 the RecyclePool. Question: how is RecyclePool set? what
2153 happens to the ScratchPool?
2154 kes Apply Eric's media patch that collects read/write media
2155 times as well as byte counts. This patch requires a
2156 simultaneous upgrade of the DIR and SD. Note, there
2157 should be some way to turn off timing. I'm not sure
2158 times are in Bacula units.
2159 kes Apply Eric's batch-insert patch.
2161 kes Update projects list.
2163 kes Implement Include/Exclude file lists in FD as dlists using
2164 the new dlistString class. This permits efficiently having
2165 large include/exclude lists and completes project Item 25.
2166 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2167 console is authorized to cancel the job. This fixes bug
2169 kes Modify SD so that the VolCatJobs medium record is updated
2170 at the beginning of a Job rather than the end. This
2171 fixes bug #775 where exceeding MaxVolJobs caused jobs
2173 kes Added a mutex around getting and setting Volume information
2174 so that multiple simultaneous jobs will single thread.
2176 Switch to using Subversion
2177 kes Remove src/pygtk-console/ from configure
2179 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2180 plus the entrypoints.
2181 kes Apply patch supplied that corrects debug print
2182 in canceling jobs for max run time. Supplied as
2183 part of bug #621, which was previously fixed.
2185 kes Test on job_canceled() and sd_msg_thread_done inside
2186 loop starting the message thread to avoid a race condition.
2188 kes Remove rl_catch_signal from console.c as it conflicted
2189 with the header definition. Fixes bug #765.
2190 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2192 kes Clarify some stored/acquire messages to indicate if the
2193 problem is with read or append.
2195 kes Fix memory leak with storage ids in cats/sql_get.c
2196 kes Terminate watchdog earlier to avoid reference to released
2197 memory -- reported by Jason Austin.
2198 kes Move closing the database from jobq.c to the director daemon
2199 termination routine. This fixes memory leaks for shadow jobs
2200 (i.e. migration jobs).
2201 kes Free up the unique jobid chain items in migrate.c. This fixes
2202 a memory leak problem.
2203 kes Convert some ugly looking for statements to use foreach_alist
2204 in findlib/find.c. This will facilitate converting the structures
2205 to use dlist (for large include/exclude lists).
2206 kes Fix a bug in the btree.c and btree.h routines, then rename them
2207 rblist and add them to be built in src/lib. Include some new
2208 methods written by Rudolf Cejka that make the code more readable
2209 (hides some of the ugly casting).
2210 kes Add set_next() and set_prev() methods which make the code much more
2211 readable. Also add a new dlistString class that facilitates storing
2212 strings in dlists. To be used in the large include/exclude lists.
2213 kes Make some trivial modifications to lib/tree.h that use rblist
2214 rather than dlist for storing the tree links. This was suggested
2215 by Rudolf Cejka. The result of this is that the restore tree now
2216 uses red-black binary trees rather than simple linked lists. This
2217 should give rather dramatic speed improvements for directories
2218 contining large numbers of directories/files (more than 10000).
2220 kes Fix maxruntime bug #621.
2222 ebl Implement the include JobID in spool file name project.
2223 kes Reorder projects file in order determined by Jan 2007 vote.
2224 kes Implement item #12 on project list -- quick release of FD by
2226 kes Fix open of SQLite3 db where user does not have write permission
2227 so that DIR does not crash. Fixes bug #761.
2229 kes Add back missing @ in Win32 Makefile.
2230 kes Change 'Device not configured to autolabel' from INFO
2232 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2233 which should restart an indefinite # of times.
2234 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2235 other DIR specifications.
2237 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2238 Fix path quoting in SQLite scripts.
2239 Fix problems with SHGetFolderPath.
2241 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2243 kes Fix Job restart on error bug that promotes an Inc to a Full
2244 backup. This should fix bug #755.
2245 kes Add qt-console and first cut of code.
2249 kes Fix Bacula->Documentation link on Win32 to point to index.html
2250 instead of bacula.html. Fixed bug #750.
2251 kes Return JobId in db_get_job_record() when JobId==0. This should
2253 kes Do not release source pointers when restarting a failed job.
2255 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2256 This *should* fix bug #747.
2257 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2260 kes Modify USTORE constructor to set an empty store_source string,
2261 and don't copy the store_source string in a cancel. Hopefully
2262 this will fix Arno's seg fault, bug #744.
2263 kes Add back code to disable conio in configure. Fixes bug #743.
2264 kes Correct the Options scanner in the FD to correctly handle
2265 SHA1 option, which was eating the next option. Reported by
2267 kes Add code to indicate when the SD is spooling, spool wait, and
2268 despooling as requested by Alan Brown.
2270 Version 2.0.0 released: 4 January 2007