1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
29 ebl Disable vtape for FreeBSD.
31 ebl Modify disk-changer to check if slot contains something before
34 ebl Fix vtape on win32 and debian.
35 ebl Fix autoselect patch (cause segfault).
37 ebl Fix autoselect option broken for a while. Fix #1089. Need some
38 work with StorageId to be able to use a particular drive in a
41 ebl Rename faketape to vtape.
42 ebl Update faketape driver.
44 ebl Modify faketape driver to avoid sparse file.
45 kes Add make clean of qt-source directory during ./configure
46 kes Store last block number written to tape in DEVICE and
47 use it for testing for correct last block on EOT.
49 Release Version 2.4.0:
53 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
56 kes Add create_postgresql_database.sql to Win32 installer. Should
57 fix problem reported by Juilio Monteiro.
58 kes Get correct slot when auto unloading a device. This fixes bug
61 kes Fix multiple media restore.
62 kes Make DEVICE Slot private and access it via a method.
63 Allows better control over when it is set and cleared.
64 kes Fix possible seg fault if SQL error.
66 kes Add Martin's fixes to argument scanning for the estimate
67 command. This fixes bug #1093.
68 kes Add debug code to SD.
69 kes Fix renaming a Volume, which used the wrong Volume name.
71 kes If operator has rewind tape, print warning, release tape and
72 try once more. If tape is positioned somewhere, something went
73 wrong, so mark the tape in error and try once more. Previously
74 this error was fatal, now it produces an error message.
75 kes Ensure correct volume name displayed during restore
76 kes Ensure that Volume is mounted for restore.
78 kes Fix a few more Coverity reported problems.
80 kes Apply Allan Black's status dir job count patch.
81 ebl Add information about IMPORT/EXPORT slots in mtx-script.
82 kes Enhance a couple of SD debug messages.
83 kes Tweak unload flag setting and ensure it is set during swap.
85 ebl Fix #1091 about bad output in estimate command.
87 kes Modify autochanger locking to attempt to avoid race
89 kes Make sure device not busy before doing label command.
90 kes Display open() errors except when polling. Previously too
91 many were suppressed. This should fix bug #1070.
92 kes Fix Win32 reparse points. Bacula will not recurse into any
93 reparse point directory, including mount points, unless the
94 directory is explicitly mentioned at the top level (same as
95 with Unix). A file that is linked to another file will be
96 backed up -- much as Unix does for hardlinked files.
99 kes Remove double quotes from ChangeLog and ReleaseNotes
100 kes Remove StorageId test when pruning and recycling (Eric's changes).
101 kes Remove old form of locking when getting volumes -- causes deadlock.
102 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
103 the name unique and to eliminate compile time error.
104 kes Add accurate.o to Win32 FD Makefile
106 kes Fix cats dll build on Win32 after db_update_job_end_record
107 calling sequence change.
108 ebl Switch to tokyo dbm instead of htable in accurate code
109 ebl Include tokyo dbm to bacula source tree
111 kes Fix buffer overruns detected by Coverity.
113 kes Tweak joblog display.
115 kes Implement --without-qwt
116 kes Fix layout of restore tree dialog
117 kes Add configure bat QWT libraries, so that bat can be built
118 with or without the QWT libaries.
120 ebl Add dummy tape driver for regression tests.
121 kes Make sure we unload the right slot when swapping.
123 kes Add debug times, reduce size of two-pool-changer test
125 ebl Tweak autoconf scripts for faketape
127 kes Improve SD reserve debug code.
128 kes Testing an improvement to free up volumes no longer in use.
130 kes Rework SD acquire for read to handle autochanger Volume
132 kes Implement regression that explicitly tests swapping a Volume
133 from one drive to another.
134 kes Enhance disk-changer to detect most error conditions.
135 kes Fix SD code so that it properly swaps a Volume between drives.
136 This fixes bug #1083.
138 kes Apply libdbi patch from Joao Freitas for regress and for
139 Bacula trunk. Regress now works with libdbi. Nice.
140 kes Apply .nobackup patch from bug #1077 submitted by
142 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
143 name into jobs cloned via the run directive.
145 kes Prevent a Volume that is being swapped from being freed from
146 the volume list. This will most likely fix, at least partially,
148 kes Fix strippath so that it does not get a buffer overrun and crash FD.
149 This fixes bug #1078.
150 kes Remove 50 millisec wait in SD that broke debugger.
151 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
152 that a job may run, counted from when the job was scheduled.
153 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
154 a job may block waiting for a resource, counted from when the job starts
155 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
156 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
157 that implements multiple commands per line in the console when using
158 readline. Modify the default to use a semicolon as the command separator.
160 ebl Fix SQL query in migration code.
161 ebl Make accurate mode with hash disk pass regression tests
163 ebl Implement first cut of accurate backup with hash disk.
165 kes Force unload of volume when wrong volume mounted in SD.
167 kes Fix bat seg fault at termination.
168 kes Add Bacula generated version to bat about box.
171 kes Experiment with allowing multiple read jobs.
172 kes Move final volume swapping code to DCR method and
173 call it from acquire_for_read().
174 kes When wrong volume is mounted during read, unload_autochanger.
176 kes Integrate the libdbi changes from Joao Henrique Freitas
178 kes Stop searching for Volumes in SD askdir if DIR returns the
179 same volume name twice in a row.
180 kes Close bat console windows first to eliminate error message
183 kes Tweak the swap Volume from one drive to another code so that
184 it now seems to work.
185 kes Resolve several problems with recycling that broke the new
186 code (these problems are in 2.2.9 as well).
187 kes Remove the volume lock when calling the sysop code.
188 kes Don't mark a reserved volume with no writers as unused otherwise
191 kes Rework class structures for VOLRES, DCR, and DEVICE to make
192 the method names a bit more logical, and for more logically
193 handling the responsibilities.
195 kes Remove redundant code in terminating the scheduler that just
196 causes a seg fault in many cases.
197 kes Cleanup releasing a volume and make it a DCR method.
198 kes Improve algorithm for detecting pre-reserved volume and
201 kes Tweak volume swapping code so it works.
202 kes Correct name overloading in mount.c
203 kes Replace released flag in VOLRES with reserved and add access
204 methods for the VOLRES class.
205 kes Prevent volume from being released while being swapped.
206 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
208 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
210 kes Refactor parts of stored/mount.c
212 ebl Add sanity checks for VolWriteTime and VolReadTime
213 ebl Take care of bad clock changes while computing VolWriteTime
214 and VolReadTime. This should fix or limit #1066
215 kes Correct error string numbers in dird/catreq.c
216 kes Restructure reserving, acquiring, and mounting volumes. Calls to
217 autochanger are deferred for mount.c -- simplifes the code.
219 kes Do not prune any running job. It just fails the job.
220 kes Lock the volumes when changing dev->reserved_device and marking
221 the volume unused otherwise the device can get reserved by
222 another job before the volume is released, thus blocking it.
224 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
225 kes Fix bug #1063, reuse of freed ptr in list nextvol.
226 kes Release regex compile buffer in filed/job.c
227 kes Add proper type of const char in sql_create.c
228 kes Turn off debug in daemon termination routines
229 kes Move free_volume_list() before devices are freed in stored.c
230 kes Fix reference to uninitalized stack variables in bregex.c.
231 This should correct bug #1067.
233 kes Fix possible seg fault in SD when freeing a volume entry.
235 kes Implement unload_dev() before swap device.
236 ebl Add statistics prunning with option and menu
237 kes Separate unload_dev() from unload_other_device() in autochanger.c
239 kes Apply patch from bug #1069 that corrects spurious error messages
240 when ACLs enabled on SGI but no ACL exists.
241 ebl Fix small segfault in bacula-sd when debug level is 500
242 kes Modify run_program() and run_program_full_output() to use
243 call by reference for the results string. This corrects a long
244 standing problem where the address of the string may be changed
245 in the subroutine but not in the calling program.
247 kes Re-enable code to remember last volume mounted on a non-tape
249 kes Add patch supplied in bug #1068 that fixes a SD crash when using
250 a Virtual autochanger.
251 kes Generate correct JobMedia records during spooling/despooling when
252 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
253 <tih@hamartun.priv.no> for excellent analysis and testing.
255 kes Tweak hash algorithm for htable using Martin Simmons idea
256 for doing a circular shift.
257 kes Remember what volume is in VTLs (previously turned off for
259 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
260 pointed out some problems in creating JobMedia records during
261 spooling with concurrent jobs. Fix the problem by updating the
262 start file position before despooling and generate a jobmedia
263 record at the end of despooling.
265 kes Fix handling of JobMedia records during spooling and when a
266 Volume is changed without actually writing data to the Volume.
268 kes Rework certain SD locking based on gdb tracebacks of deadlocks
269 sent by Eric. This code now uses only the volume_lock() rather
270 than the reservations lock when at EOM and acquiring a new
272 kes Ensure only one exit point in several subroutines.
274 kes Implement bsock code to permit locking. Use the new code in Verify
275 in the FD to prevent the heartbeat thread from disrupting the Verify
276 data sent to the Dir.
277 kes Modify SD locking to eliminate locking the reservations system from
278 outside the system. Use the volume lock when getting media data
279 and reserving a new volume at end of media.
280 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
281 when SD starts are not locked into place.
283 kes Fix error compiling runscript code on 64 bit machines.
284 kes Tweak Win32 mount point code.
285 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
286 cleared giving bad file estimate).
287 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
290 kes Keep Schedule run lists in order as suggested by
293 kes Implement autostart scripts for Debian.
294 ebl Implement upgrade catalog scripts.
296 ebl Apply jobstat patch for long term statistics. Have to implement
297 purge stats command and upgrade scripts.
298 kes Fix mtx-changer.in for broken Debian mt program.
300 kes Fix large number of JobMedia records reported by Eric Bollengier.
302 kes Apply doc fix from bug #1062.
303 kes Resolve crash and improper restore wx-console Win32 restore
304 GUI. Fixes bug #1065.
305 kes Update Win32 wxWidgets to latest version.
306 kes Attempt to do correct handling of Win32 mount points. Should
308 kes Fix Win32 FD backup/restore memory leak due to improper termination
309 of BackupRead/Write. This fixes bug# 1038.
311 ebl Reduce memory usage for accurate backup, working only with ctime
312 and mtime. (not all Lstat field)
313 About 40MB for my linux system (400.000 files)
315 kes Add dcr->reserved_volume flag that allows us to release a volume
316 even if it is not vol->released. This allows maxvol2 to work when
317 Volumes expire and we are already writing to the device (i.e. a
318 volume is pulled out from under us by another job terminating after
319 we reserve the drive).
321 ebl Permit multiple command/console per runscript definition.
322 RunScript { command = /bin/true ; command = /bin/false ... }
323 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
324 (restart an application) just after the VSS snapshot on windows.
325 kes Don't zap dcr values during release_volume() as they might
326 have the next Volume to be mounted.
327 kes Fix AIX prototype.
329 kes Second cut of drive switching during backup.
332 kes Update Win32 version of wxWidgets to most recent version.
333 kes Tweak Copy job details.
334 kes Rework dir_find_next_appendable_volume to make a bit more effort
335 to find a suitable volume before giving up.
337 kes Make ask_sysop_to_create... to return if waken from wait.
338 This helps get out of blocked conditions.
339 kes Experimental implementation of switch_device in reservations.
340 kes Implement FD version to allow easier protocol changes.
341 kes Add Plugin Options string -- not yet passed to FD.
342 kes Implement PluginOptions ACL.
344 kes Attempt to correct problems with restores with autochangers and
345 use counts going negative
346 kes Rework SD status command and implement API for bat. Implements
347 header, runing waitreservation, devices, volumes, spooling,
348 and terminated status keywords.
349 .status storage=xxx <keyword>
350 kes Clarify TLS error message by adding double quotes around name.
351 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
352 kes Pass jcr to tls routines so debug messages can be handled better.
353 kes Rework jobq resource allocation code, and possibly fix a bug
354 that caused reference counts to get out of sync.
356 kes Rename fd/dir plugin to use Bacula standard underscore.
357 kes Plugin work -- bring dir up to fd level.
358 kes Start implementation of VTL code
359 kes Fix Win32 build after adding new cats subroutine.
361 kes First cut at Duplicate Job implementation.
363 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
364 kes Start PluginOptions string, and refactor a bit of ua_run.c
365 ebl Apply Allan patch that permit to reset recyclepool.
367 kes Test patch -- possible fix or improvement for bug #1053
368 kes Refactor FD and SD status commands to permit new API code in
369 SD, and to fix Win32 build.
370 kes Win32 build is now working.
372 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
373 some ideas in patch from Scott Bailey.
374 kes Begin implementation of duplicate Job control.
375 kes Fix some of Win32 build after recent additions.
376 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
377 which causes the FD to detect whether or not the OS has the
378 honor no dump bit (*BSD systems), and if so, to skip backing up
379 any file with this bit set. The feature is enabled by setting
380 'honor no dump flag = yes' in the Options section of a FileSet.
382 kes Correct po warning message with datarootdir
383 kes Implement more code in dird.c to put configuration parsing in
384 a class rather than use globals.
385 kes Restructure SD status command for implementation of bat API
388 kes Suppress incorrect 'Will not descend from x into y' messages.
389 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
390 daemon globals used by parser.
391 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
393 kes Fix free of plugin_list when none exists.
395 ebl Apply accurate project patch.
397 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
398 on non-mempool object)
399 kes First cut of converting FD .status to work with bat API.
401 .status client=XXX header
402 .status client=XXX running
403 .status client=XXX terminated
404 kes Implement first cut of Copy Job.
405 kes Implement Catalog in Pool resource. It overrides catalog specified
406 in the Client resource.
408 kes Apply patch (with some difficulties) from Joao Henrique Freitas
409 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
411 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
412 ftruncate() actually works. In the case of some (cheap) NAS devices,
413 it does not, and so recycling NAS Volumes does not work. The code
414 simply unlink()s the file, then recreates it. This fixes bug #1011.
416 kes First incomplete cut of big malloc blocks for htable.
417 kes Tweak plugin code.
419 kes Plugin debug code + tweak a couple bat dialog layouts
421 kes Fix creating first JobMedia record during Migration to include
422 proper index. This caused slow restores of migrated jobs.
423 kes Temp fix to plugin name file_index.
424 kes Bacula backed up and restored a MySQL database.
426 kes Implement plugin restore.
427 kes Implement parsing of db_driver to give db_type index.
429 kes First cut of plugin restore code.
430 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
431 and do not strip paths on symbolic links.
432 kes Set catalog backup database and user name from values specified on
433 the ./configure line.
434 ebl Fix #1031 about wrong pool source information in job report.
437 kes Remove a redundant jcr argument to find_files, match_files, and
439 kes Implement '.status dir header|scheduled|running|terminated' that
440 prints the requested status section. With the exception of the
441 header, the other reports have fields separated by tabs (\t).
443 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
444 a resource embedded run command to find a since time if no explicit
445 since time was supplied on the command line.
446 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
447 that updates the state file at job termination time in addition to
448 when the daemon terminates.
450 kes First version where a plugin did a backup.
451 bpipe-fd.so created a backup file, wrote a test
452 string to it, and Bacua could restore this fabricated file.
454 kes Implement DB Driver = string for the DBI driver.
455 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
456 kes First cut of code for loading Win32 plugin dlls. Implement
457 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
458 and implement a dlfcn.h file based on opengroup's definitions of
461 kes First cut plugin directives.
463 kes Apply patch from bug #1049 to prevent stripping the path on a
465 kes Attempt to fix bug #1047 where stripping a path corrupts the
466 heap. Waiting for feedback.
467 kes Correct the Mount message not to suggest labeling a new tape
468 when doing a restore. Submitted by email by John Stoffel.
469 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
470 FD by using casting. Reported in bug #1042.
472 kes A bit of crypto cleanup. More later.
474 Release Version 2.2.8
476 kes Apply patch from Martin to correct bug #1040, bscan sets existing
478 kes Fixed important spelling error in doc -- bug #1045.
480 ebl Fix bextract to be able to extract non-portable Win32 data to
482 kes Move initialization of read/write res lock earlier in the code.
483 This fixes the crash with a null conf file. This fixes bug
485 kes Redefine CURES in lib/parse_conf to be URES and move it all
486 into lib/parse_conf.c -- this responds to bug #1042, but does
487 not fix it. The fix is not to compile with FORTIFY_SOURCE.
488 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
489 the trunk SVN. I don't think this was reported as a bug.
491 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
493 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
495 kes Add DataDespooling and DataCommitting status (committing is
496 the last despooling).
497 kes Finish implementation of new reservations code noted below.
499 kes Fix bsnprintf for float point numbers. I broke recently when
500 parameterizing some variables. This fixes bug #1036.
501 kes Undo recent reservations changes ... will apply them later
502 when they work better.
504 ebl Fixes #1034 which cause mysql to hang the connection after 8h
505 ebl Change default statistics target of filename.name and path.path
506 fields for PostgreSQL. This speeds lookup by indexes. Thanks
508 kes A few more tweaks to new reservation code. Make sure to clear
509 vol released flag when retaking volume. When reading label and
510 label is bad mark volume unused. When recycling, mark volume
511 unused so it can be renamed.
513 kes Fix reserve_volume() so it doesn't release a volume in use
514 (i.e. a volume entry not marked released). This should be
515 the last part needed to fix bug #1018.
517 kes Move Heartbeat documentation from Job to Director resource.
518 This fixes bug #1033.
520 kes Fix existing switch drive SD code to call autochanger to release
521 any old volume. This must be done to keep the autochanger from
522 releasing subsequently newly reserved volumes in doing a close().
523 This should fix bug #1018.
524 kes Fail if attempting to get console input in batch mode. This
525 should help fail RunScript console commands that are incomplete.
526 kes First cut implementing switch_drive() in SD (not actually called).
528 kes Implement first cut running console commands in a RunScript.
530 ebl Fixes bug #1028 where 'Selection Type' option was not usable
532 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
535 Release Version 2.2.7
537 kes Add new free_tls() entry point so that Win32 builds.
538 kes Fix compile warning in src/lib/util.c
539 kes Fix entry point for edit_job_codes() so that Win32 builds.
540 kes Fix seg fault Frank Sweetser reports in regression testing
541 on his systems. The problem was that the original author of
542 bsnprintf.c did not take into account the side effects of
543 using ++x in the argument to a #define.
544 kes Make SD protocol backward compatible with version 2.2.x.
546 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
547 because Bacula no longer restores sockets.
548 ebl Always use ignorecase fileset option on win32 FD.
550 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
551 that implements double quoting include names in conf files,
552 and also allows piping input by having the first character
553 be a vertical bar (|).
554 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
555 that implement %f in RunScripts to pass the FileSet name.
556 kes Skip leading | when lex input comes from a pipe as suggested
557 by Michael Stapelberg <michael@stapelberg.de>.
559 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
560 Nerijus Baliunas <nerijus@users.sourceforge.net>
562 kes Implement Plugin Directory and plugin events.
564 kes Implement a security enhancement: TLS authentication but no
565 encryption. Enabled by setting 'TLS Authentication = yes'.
566 Note when this is on, TLS encryption is turned OFF!
568 kes This patch corrects a problem where the maximum concurrent storage
569 jobs counter gets out of sync during restore jobs causing jobs to
570 'wait on max Storage jobs'. This patch fixes bug #1009.
572 kes This patch fixes bcopy so that it produces correct Volumes.
574 kes This patch eliminates spurious output to the console during a VerifyVolume
575 job that contains encrypted data. It fixes bug #1024.
577 kes This patch prevents the 'status dir' command from trying to use a scratch
578 volume and possibly moving it from one pool to another. This patch fixes
581 kes Add new include to postgresql.c suggested by Marc Cousins so
582 that it compiles correctly with pgre version 8.3.
584 kes Fix --archivedir addition to configure. Replace it with
585 --with-archivedir in configure.in This fixes the regression
587 kes This patch fixes bug #1012 where the job is canceled because
588 of Max Run Time exceeded when the job has not yet started.
590 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
591 one 'part' to write. Instead of each part being stored on disk,
592 written to DVD, then deleted from disk, all parts are written to disk,
593 and only the last is written and deleted from disk.
594 kes This patch fixes the status command to include the formating string for
595 JS_AttrInsterting. It fixes bug #1021.
596 kes This patch should fix the Mac OS X build problem on the latest
597 Darwin, where sys/types.h was not included correctly (apparently
598 due to a change in the Mac headers). The solution was to explicitly
599 ensure that it is defined for the ./configure.
600 This patch also has a rebuild of configure that includes the Debian
601 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
602 kes This patch should ensure that queued messages to the console are
603 displayed as soon as possible. It should fix bug 1007, but has been
604 reported not to work.
606 kes This patch fixes the infinite loop when trying to increase the
607 maximum number of volumes in a Pool during the add command.
608 This patch fixes bug #1008.
610 Release Version 2.2.6
612 db Remove extra data on estimate command in joblist for bat.
614 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
615 really change anything, but is the beginning of doing it *right*.
616 To do it completely right the LastWritten date must be passed to
617 the SD, but it is not yet done.
618 kes Minor tweaks to some bat restore SQL.
619 kes This patch fixes bug #1003 where putting the message output from
620 a Verify job into the catalog results in a recursive loop. The problem
621 seems to show up only with postgresql (to be verified).
622 kes Correct %x to %p in postgresql debug statement.
624 kes Fix bug #942 where lots of emails where generated when the heartbeat
625 interval was low and Bacula wanted a different tape from the one in
628 ebl Add new SD despooling attributes and Dir inserting attributes
629 job status codes in the catalog (Status table).
631 ebl Use qmake-qt4 instead of qmake when available (debian system).
633 kes Add a security warning to src/cats/make_catalog_backup.in indicating
634 that passing the password via the command line (arg 3) is insecure.
635 This responds to bug #990 (it doesn't fix it).
637 kes Set default debug_level to zero. This corrects bugs #991 and #993.
638 kes Fix a crash in bat when it cannot connect to the Director for example
639 if the Director is not running.
640 kes Remove redundant INDEX (JobId) from File table in the trunk.
642 kes Make explicit exception to GPL in LICENSE to permit linking
643 the Win32 FD with Microsoft VSS code.
644 kes Apply the Solaris package patch from
645 Masopust, Christian <christian.masopust@siemens.com>
646 kes Apply the patch to optionally add a timestamp in the debug output
647 submitted by Mariusz Czulada <manieq@wp.eu>.
649 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
650 backend (sql_strerror). Fixes bug #989
652 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
653 It applied with no problems.
654 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
656 kes Redirect stderror to stdin on mt status command in mtx-changer.in
657 since the status is returned on stderr on Solaris.
658 kes Activate Close button on tray-monitor window. This fixes
660 kes Check for NULL item in parse_conf.c before calling it. In the
661 case of Device, there is no item and this caused a seg fault when
662 Device appears in the conf file.
663 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
664 avoids pulling in config.h multiple times in some new code.
666 kes Fix spurious warning message printed when creating a volume with
667 a LabelFormat. This fixes bug #976.
669 Release Version 2.2.5
671 kes Add JobId in place of Job name in all the Jmsg() output.
672 kes Correct the APP_DESC for the Win32 storage service (remove an e).
674 kes Make maxvol-test and new more strict maxvol2-test work.
675 kes Print JobId in all Jmsg() job output.
677 kes Add new SD despooling attributes and Dir inserting attributes
678 job status codes. This fixes bug 961.
679 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
681 kes Fix doc issue. This fixes bug #963.
682 kes Fix listing performance problems in bat. Pointed out by
684 kes Remove old debug code.
685 kes Fix bat code that tests for Win32. This should fix bug #968
686 kes Query 5 list wrong Vol after migration. This fixes bug #960
688 ebl Fix #969 where user can't change Replace option in restore menu.
690 kes Save jcr in thread specific data (tsd) for each thread.
691 kes Make Dmsg() print JobId as -%u.
692 kes Make Jmsg, Emsg, and others automatically pickup the jobid
693 for the thread if it exists.
694 kes Remove old reservation debug jid code.
695 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
696 ebl Add an option that permit to specify spool size in job
697 definition. (Applying patches/testing/spoolsize_per_job.patch).
698 You must upgrade SD and DIR at the same time.
699 dvl Add new configuration item --archivedir
700 dvl Adjust regression tests to use tmp not /tmp. This will allow
701 multiple concurrent runs of the regression tests.
703 kes Fix race condition that drops final block written to volume.
704 This happens in rare cases with multiple simultaneous jobs
705 when the Volume fills. This fixes bug #964. May be related
706 to bug #935 and possibly #903.
707 kes Eliminate more strerror() and replace with bstrerror().
708 kes Remove BSD getopt and replace with unrestricted IBM version.
709 kes Fix Win32 build for changed calling sequences.
710 kes More tweaks to the mount volume routines to get everything
711 right. Changed variable name from find to have_vol, which is
712 much easier to understand.
713 kes Enhance btimer debug code.
715 kes Fix FD->SD authorization failure, which was due to spurious
716 wakeups from a pthread_cond_timedwait(). Simply check the
717 predicate before continuing. This fixes bug #953.
718 kes Add const char where needed (more to do). Remove temp debug code.
720 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
721 kes Don't overwrite error message in check_tables_version.
723 kes Unlock batch insert tables with same calls used elsewhere.
724 kes Allow starting 59 jobs a second.
725 kes Make SD session key more random.
726 kes Add retry for SQLite opening db if it fails. Probably helps
728 kes Suppress extra error messages during batch insert failure.
730 kes Add jcr to timer packets so if killed message can be sent to job.
731 kes Add JobId to all Dmsg() output.
732 kes Put some FD auth code on dbglvl rather than fixed.
733 kes Return insert attributes error message in db msg buffer to avoid
734 false error messages. Helps fix bug #966.
735 kes Separate batch init error messages. Probably helps fix bug #966.
736 kes Make SD code that contructs attribute insert check string lengths
738 kes If Dir gets an error during inserting attributes, cancel SD.
739 This reduces unnecessary error messages.
741 kes Correct search boolean for getting Volume info
742 ebl Cleanup batch insert code. Probably fixes bug #965.
743 kes Back out one small change to the reservation system (reserving a volume).
744 kes Rework how a Volume is mounted. It is now much more intelligent and
745 will always attempt to use any mounted volume if possible and reduces
746 calls to the Director asking about volumes.
748 kes Turn off some code when batch insert not enabled.
749 kes Edit FD name in connect error messages.
750 kes Rework the reservation system to take into account that the Director
751 might give us a Volume that is different from the current one being
752 used, and to ensure that we don't exceed Maximum Volume Jobs.
753 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
754 fatal error with multiple jobs running'
755 kes Add more debug code in reservation system.
756 kes Implement maxvol-test to check bug #947.
758 kes Add code to handle tray monitor separated from Win32 FD.
759 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
761 kes Add missed return in fixing verify bug -- trunk only.
762 ebl Fix a command parser issue causing a director segfault.
763 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
765 kes Increase the max block size to 4MB fixes bug #957.
766 kes ERABT if user sets min block size > max block size. Fixes bug #956.
767 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
768 is not properly mounted (recognized) during a poll.
769 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
770 Job that has differences reports Verify OK.
771 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
773 ebl Add an option to operate on all pools with update vol parameters.
774 This complete the project 20. Patch from Nigel Stepp.
775 ebl Add history support to bconsole when using readline.
776 Using Ctrl-D to exit doesn't update .bconsole_history
777 kes Modify new volume algorithm to use max MediaId for generating next
778 volume number rather than the count of Volumes. This should essentially
779 eliminate the failure rate if some volumes were deleted. Bug #921.
780 kes Begin implemention of Optimize Job Scheduling.
781 kes Implement restore callback that Dirk and I agreed on for bat
782 restore. This fixes bug #928. Restore of backup of zero files fails.
783 kes Fix SQL Catalog logging which broke with new db_escape_string
786 Release Version 2.2.4
788 kes Fix bacula_cats.def for new db_escape_string().
789 kes Increase size of name string when FD making connection to SD.
790 May fix bug #953. FD->SD connection failure.
792 kes Add code to help Dan debug 2drive-incremental-2disk test.
793 kes Add code to try to fix bug #908.
794 kes Add waits to multiple exit detection code to try to force pid
795 file to always be deleted.
796 kes Restore good dev.tar.gz to rescue set appropriate binary property.
798 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
799 trying to switch drives by checking for blocking before unblocking.
801 kes Cancel storage daemon in all cases where FD reports error. This
802 should fix virtually all cases of bug #920.
803 kes Fix db_escape_string() for MySQL which did not compile.
805 kes Fix error message that was clobbered when Dir tells SD it does not
806 have write permission on Volume. This should fix a minor point
807 in bug #942, but not the main problem.
808 kes Add code to cancel job in SD if FD connection fails. This should
810 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
811 dvl Pass jcr and db into db_escape_string() to enable better escaping
813 kes Fix migration code to get correct Volume name with multiple volumes
814 by skipping |. Fixes bug #936.
815 kes Implement patch supplied by Landon to fix bug #944 where using
816 TLS with bconsole uses 99+% of the CPU.
817 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
819 kes Move patches into patches directory.
821 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
824 ebl Using 'm' in bconsole will show messages like before,
825 and not memory usage.
826 kes Fix bug #935, and probably also bug #903 where files were not
827 restored. MediaId was not properly set in JobMedia record after
830 kes Suppress chown and chmod error messages if the FD is not running
833 kes Apply Martin Simmons' patch that should turn off the new API usage
834 when batch insert is turned off allowing building on older
836 kes Add ./configure search in qwt-qt4 for qwt package
838 kes Bacula is now free of 3rd party GPL copyrighted code!
840 kes Add guid_to_name.c/h which replace idcache.
841 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
843 ebl Detect if new PosgreSQL batch insert API is present.
844 kes Correct incorrect mempool call causing Director crash. Occurs on
845 systems without va_copy().
846 sb Update spec files for 2.2.1 release
848 kes Fix memory pool call in ua_output.c. bug #934.
849 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
850 Add test program to fnmatch.c
852 kes Integrate patch to README.vc8 from
853 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
854 edit it to get it into Unix patch format.
855 kes Implement mkpath.c to replace old FSF makepath.c
857 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
859 Release Version 2.2.1
861 kes Update POTFILES.in
862 kes Cleanup a few underquoted AC_DEFUNs in configure
863 kes Apply patch from Martin Simmons that adds a test for va_copy to
866 kes Fix bug #921 by increasing the number of tries to create a new volume
868 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
869 can be called multiple times. Implement a version for machines
870 without va_copy() that gets a big buffer.
872 kes Integrate more portable zone offset code into bsmtp.c
873 Submitted by Attila Fülöp.
875 kes Fix bad SD->FD return status reported by
876 (James Harper) <james.harper@bendigoit.com.au>
877 ebl Fix a bug in read_close_session which return random status
878 thanks to James Harper
880 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
881 and directory names during restore of single file/directories.
882 kes Add sanity checks to .sql command when string is empty. Hopefully
883 that will resolve Dirks Director crash.
885 kes Apply patch submitted by Martin Simmons that corrects a seg fault
886 in the bsmtp chat subroutine when debug is >= 10.
888 kes Fix Director crash when running bat SQL queries.
889 kes Add David's notes on Item 8: Copy pools.
891 kes Rework projects file to be current and ready for a vote.
892 kes Enhance lex scanner error message.
894 kes Tweak LICENSE file to mention BSD code.
895 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
896 if specified on the ./configure.
897 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
898 This class is intended to allow us to open a second bsock to the
899 Director while in the restore subdialog.
901 kes Fix configure to create bat Makefile before creating dependencies.
902 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
903 kes Add a tooltip to the tray monitor.
904 dvl Set the Director's PID file before dropping privs. This fixes
907 kes Update AUTHORs file
908 kes Increase the default max concurrent jobs to 20 in FD and SD to
909 correspond with the default .conf files.
910 kes Rewrite the Win32 service routines. This eliminates the 3 copies
911 some different, of the same file created by RN when porting the
913 kes Rearrange some of the Win32 directories and the placement of the files
915 kes Set DEVELOPER flag in version.h
917 ========================================================================
918 Release Version 2.2.0
920 kes Apply a second doc patch from Marc.
921 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
922 improves the tips section that discusses how to setup multiple
925 kes Update bat README file.
926 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
927 corrects a typo in the Recycle status check in db_find_next_volume().
928 This will probably fix a number of annoying problems with multiple
930 kes Modify most of dird/msgchan.c to use bsock class calls rather than
931 bnet calls -- no functionality change.
933 kes Modify the Verify output to specify if files are missing on
934 the Volume(s) or disk. Fixes confusion in bug #916.
935 kes When more than one Volume is read in a migration job, the last
936 Volume bytes reported are from the last read volume rather than
937 the last written volume. Fixed. This fixes bug #910.
938 kes Fix display of Recycle flag after update volume=foo recycle=yes.
939 It previously printed New Recyle flag is: no. This fixes bug
942 kes Correct seg fault when switching tape drives during restore.
943 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
944 be used until after 2.2.0 release.
946 kes Remove fnmatch() in SD that permitted wild card specifications.
949 kes Fix %g in filename returned by SQL for browse tree reported by
951 kes Fix configure so that it puts config.out in the cwd rather than
953 kes Attempt to fix the locking problem reported by Eric in bug #906.
954 kes Make berrno class to leave errno unchanged after constructor call.
955 kes Make bnet_server use the heap rather than the stack to allocate
956 its socket fd pointers to avoid a crash at termination. Problem
957 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
959 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
960 and putting it in depkgs-qt along with Qt4.3.
962 kes Rework code in acquire.c that switches drives for reading when
963 the Media Type does not match. This should fix bug #906
965 ebl Fix a director segfault during job setup #907
966 kes Correct seg fault in postgresql when first operation returns no
967 rows. Fixes Dirks File browser problem seg fault with bat.
969 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
970 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
973 kes Implement PopUp YES/NO dialog for bat.
975 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
977 kes Correct RunScript to terminate job in FD on failure.
978 kes Change abort_on_error and AbortJobOnError to fail_on_error
979 and FailJobOnError in RunScripts.
980 kes Minor tweaks of code formating in RunScripts, principally to
981 avoid depassing 80 columns.
983 kes Eliminate one #ifdef Win32 in bsmtp
984 kes Implement grow tool to grow a file for testing very large databases.
985 kes Add big-vol-test to test Bacula seeking with > 5GB.
988 kes Modify find_next_volume() to return all values in Media record.
989 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
993 kes Update Release notes
995 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
996 Warning, in previous beta version, all media get from scratch keep their
999 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1000 This should fix bug #842. Made a note to look at removing the temp
1001 files at the end of the install.
1002 kes Add ability to mount and unmount a file device providing it is
1003 marked as being removable and has the appropriate mount and unmount
1004 commands defined in the Device resource. This fixes bug #830.
1005 kes When applying a storage override, release all previous storage
1006 definitions rather than just prepending the new storage.
1007 This should prevent a good deal of confusion.
1009 kes Implement ./configure search for qwt libraries.
1011 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1012 Win32 FD. This should fix bug #893.
1013 kes Remove an unnecessary beep in Win32 init code.
1014 kes Update copyright dates in Win32 executable about boxes.
1015 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1016 code with a BSD getopt.c and getopt.h.
1017 kes Remove sched.h from the Win32 compat directory -- not used.
1018 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1019 need to shut it down, do it through the services panel or the command
1021 kes Remove some inappropriate Bacula FSFE copyrights.
1022 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1023 kes Fix regress config non-portable test as pointed out by
1024 Florian Heigl <florian.heigl@gmail.com>
1025 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1026 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1028 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1029 Reported by Frank Sweetser.
1033 kes Fix client-only build.
1034 kes Integrate client-only fixes for bsys (initgroups) and conio from
1035 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1036 kes Make arguments to get_scratch_volume() in same order as other
1038 kes Rework the prune_volumes() subroutine so that after purging and
1039 no volume found in desired pool, it will check for a scratch
1040 volume. This prevents recycling the whole scratch pool.
1041 kes Add code to status storage to print boffset_t (largefile support).
1043 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1044 kes You now need a --with-qwt=<dir> to be able to build bat.
1045 kes Update src/win32/cats/bacula_cats.def to include the new
1046 db_get_query_dbids() call on Win32.
1048 kes Correct a problem when selecting a scratch volume and moving
1049 it to another pool that lost some columns.
1050 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1051 kes Enhance Autochanger error messages to include Volume and device name.
1052 kes Rework prune_volumes() code to take account of InChanger flag,
1053 and to handle recycling volumes going to the Scratch pool and
1054 current pool because the RecyclePool directive.
1055 kes Implement a better and more efficient db_get_query_dbids() to
1056 handle creating and passing back a list of DBIds.
1060 kes Start work on new more efficient DBId subroutine. First use
1061 will be for recycling volume to Scratch inchanger.
1062 kes Increase number of JobIds in pruning from 1000 to 10000.
1063 This to be replaced by above routine.
1064 kes Begin implementation of building Qt4 on Win32.
1065 kes Correct typo in fix I added for bad TLS shutdown.
1066 kes Pull 2.0.3 patches into patches directory.
1067 kes Update Release notes. Include qt-console in line count.
1068 kes Update Projects file.
1070 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1071 bug in migration code where a job that spanned two volumes
1074 kes Implement new BST_DESPOOLING blocked state. Change from locking
1075 during despooling in SD to blocking. This means that other threads
1076 can work with the device structure, in particular the reservations
1077 system while despooling.
1079 kes Fix return in reservation message queue that missed clearing
1080 the jcr lock (implemented 26Jun07 below).
1081 kes Rename a number of dev methods to make locking function names
1083 kes Document locking in lock.c. Move lock structures to new file
1086 kes Move reservations message lock to lock jcr only this
1088 kes Move main SD locking code into lock.c (new file).
1089 kes Update Win32 build to include lock.c
1093 kes Dirk committed the qwt library code for drawing graphs in bat.
1094 kes Tweak install of qwt so that it is integrated with ./configure.
1096 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1097 out by Eric (my typo).
1098 ebl Fix configure.in to get batch mode enable
1099 kes Return correct string from authenticate.cpp in bat when connecting
1101 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1102 spurious line drops when using TLS.
1103 kes Do not file reparse points when restoring a file that already
1106 kes Implement Windows reparse points -- similar to directories, but
1107 we do not descend into it. This is a first cut. They seem to
1108 be backed up, but restore is not yet tested.
1109 kes Remove restore_blocking in tls code when shutting a socket to leave
1110 it in blocking mode. Hopefully this will fix the encryption bug
1111 reported by Frank Sweetser.
1112 kes When opening a file for backup, tell the OS that we are going to
1113 read it sequentially -- optimization.
1114 kes Change variable names in authenticate_director() to not conflict
1115 with member names in bat. Caused great confusion with compiler,
1118 kes Queue openssl error messages in case of comm problem.
1119 kes Do shutdown() call if socket terminated.
1120 kes Remove some duplicated code in tls.c
1121 kes Move more of the bsock member variables into private and access
1123 kes Add Frank Sweetser's tls-test to the regression suite.
1125 kes Add Swedish sv.po file
1127 kes Don't print clock skew message in FD if less than 3 seconds diff.
1128 kes Add a bit of VSS info to status client.
1129 kes Implement a first cut of Vista VSS, using Win2003 code.
1131 Release: 2.1.20 beta
1133 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1134 loaded tape but uses first drive).
1135 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1136 This was indeed a Win32 issue.
1138 kes Simplify search of autochanger for in-use Volume.
1139 kes Fix exit condition of check for in-use volume. kes Remove
1140 inappropriate my_postgresql_free_result() in db_close()
1142 kes Fix bad return in FD when encryption signature not found.
1143 Probably caused a crash.
1144 kes Inhibit missing encryption signature error messages for
1145 file types where no signature computed.
1146 kes Correct inverted check on autochanger in reservation system.
1147 kes Tweak debug code in autochanger reservation.
1149 kes Add some additional locking in the cats directory in subroutines
1150 that modify packet variables called from batch insert.
1151 kes Rework how dcrs are allocated. new_dcr() can now be called
1152 with an existing pointer, and it will simply clean it up.
1153 This allows the reservation system to test various different
1154 devices, and will permit easy device changes.
1155 kes A bunch of changes all over to handle new new_dcr() calling
1157 kes Work more on the Volume management in the SD. Remember Volumes
1158 for tape drives and for autochangers (even virtual disk changers).
1159 kes When looking at the Volume list to reserve a drive, handle
1160 autochanger names correctly by interating through the changer
1161 devices. Also call the Director to see if a Volume is suitable
1162 for the current job.
1163 kes Fix some bugs in bscan. Make sure all media records are written.
1164 Make sure that valid JobMedia records are written for disk files.
1165 Previously they were completely wrong.
1166 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1167 that the URLs don't change and so that the developers will all
1168 work off the same copy. Rebuild from scrach.
1169 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1171 Release: 2.1.18 beta
1173 kes Fix seg fault in FD from incorrect digest size.
1174 kes Fix argument to non-OpenSSL crypto.c subroutine.
1176 Release: 2.1.16 beta
1178 kes Remove a few malloc()s from the encryption code.
1179 kes Use the class calls to bsock in filed/backup.c and restore.c in
1180 place of the old bnet_xxx code.
1181 kes Implement code that does an on the fly calculation of the
1182 signing digest during restore of encrypted files. It makes
1183 a best guess at the algorithm, and if it is not correct, will
1184 then revert to the old code which reads the file after it is
1186 kes Implement at least one missing crypto stream in stream_to_ascii()
1187 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1188 #877 where a reload with bad syntax causes Dir to exit.
1190 Cut: 2.1.14 beta (not released)
1192 kes Do not free a volume on a tape drive until another volume is
1193 mounted and read, or the autochanger unloads the volume.
1194 This should help the SD re-use volumes that are already mounted,
1195 and should fix bug #886.
1196 kes Apply patch from user brettedgar that allows gnome2-console include
1197 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1198 kes Apply patch from Lucien Weller that fixes day of week calculation
1199 because of DST flag problem. Fixes bug #887.
1201 kes Move find_next_appendable_volume() to after acquiring a valid device
1202 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1204 kes Unable to reproduce bug 872. However added additional testing for
1206 kes Bug #874 resolved by documenting SQLite limitations.
1207 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1208 kes Bug #881 resolved by removing typo in mtx-changer script.
1209 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1210 approval. Added a link to the wiki on the web page, and implemented
1211 a backup from http://paramount.ind.wpi.edu
1213 kes Fix update allfrompool to pass pool name.
1215 kes Convert to pure GPL v2 license.
1216 kes Fix sscanf problems reported by Peter Buschman that caused
1217 a bus error on Solaris.
1218 kes Rework (simplify) the select prompt in bat.
1219 kes Move get_jobid_from_tid() into lib and create a
1221 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1222 should definitely fix the problem of lost error messages in the
1224 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1225 kes Eliminate tcpd.h from the project. Enclose the #include from the
1226 library with extern C ...
1227 kes Add print of signal name when a signal is trapped.
1229 Release: 2.1.12 beta
1231 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1233 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1234 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1235 makes SQLit3 run 30 times faster, though a bit less safe.
1236 kes Implement --with-batch-insert in configure and detection of thread
1237 safe libraries. It is on by default, but turned off if no thread
1238 safe library (e.g. SQLite 2) is available.
1240 kes Fix Bacula PostgreSQL buffer overruns.
1241 kes Do better checking for NULL results returned from PostgreSQL;
1242 implement retry for failed queries; clear results buffer after
1243 failed query. Hopefully this will correct the PostgreSQL failures.
1245 kes Implement algorithm to handle only one appendable volume with
1246 Prefer Mounted Volumes = no.
1247 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1248 returned from a query.
1249 kes Make volume lock recursive.
1250 kes Implement an additional volume reservation algorithm that
1251 starts by considering all reserved volumes then uses the
1252 old brute force algorithm of searching the resources to
1253 find a suitable device.
1254 kes Add new reservations debug code and refine the old code.
1255 kes Update the win32/dll/bacula.defs file.
1257 kes Tweak reservations algorithm to permit a few more cases, i.e.
1258 volume reserved, but on different drive, ...
1259 kes Enhance SD status to include Pool and Media Type for drive in a
1260 more readable format (a bit longer).
1261 kes Fix PostgreSQL double free.
1263 kes Minor refactoring of restore decryption code.
1264 kes Add code to smartall.c to detect double free of a buffer.
1266 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1267 so that bsmtp will create a correct email address (mailbox only).
1268 kes Modify 'memory' command so that the buffers are listed as 'In use'
1269 to avoid confusion with Orphaned buffers.
1270 kes I reworked the OpenSSL include/lib flags to be handled in
1271 the standard Bacula way, which should fix bug #863 concerning
1272 non-standard OpenSSL libraries.
1274 kes Implement Help Browser window for bat.
1275 kes Fix reload bug that reset StorageId to zero.
1277 kes Fix TLS #ifdefing when TLS turned off.
1278 kes Ensure that when labelling a tape with Slot=0 that InChanger
1280 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1282 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1283 add DISTINCT (required by PostgreSQL).
1284 kes Implement BSOCK authenticate_director() method. Eventually will
1285 authenicate all daemons.
1286 kes Move several more functions into the BSOCK class.
1288 kes Add code to tell the OS that we no longer need a cached
1289 file that we were reading. In findlib/bfile.c. Also,
1290 only cache files that we are reading. Thanks to
1291 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1292 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1293 kes Implement script to automatically generate cats and dll .def
1294 files for Win32 dll.
1295 kes Update README.mingw32 to include new .def file generation.
1296 kes Correct typo in UTF-8 error message as reported by:
1297 jhernandez <julianhernandez@gmail.com>
1298 kes Add additional sm_check() code on debug level 1.
1299 kes Set default debug level to 1.
1300 kes Trap SIGABRT in attempt to get traceback.
1302 kes Reduce bat connect timeout from 30 to 15 seconds.
1303 kes More restructuring and implementing BSOCK class in place of
1305 kes Remove a few unnecessary malloc() tests in crypto code.
1306 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1307 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1308 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1310 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1312 kes Fix Verify InitCatalog. The attributes were not pointing to the
1313 correct saved location.
1314 kes Implement message callback so that GUI is sure to get all
1315 daemon messages. Currently displayed in a dialog in bat.
1316 kes Ignore SIGUSR2 (Bacula timer) in bat.
1317 kes Apply regress patch from bug #859 to allow regress to work
1318 with Solaris compiler.
1320 kes Begin adding TLS support to bat.
1321 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1322 clean up lex.c and make it more readable.
1324 kes Move more bnet functions into the BSOCK class.
1325 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1326 kes Complete change of berrno strerror() method to bstrerror()
1328 Release: 2.1.10 beta
1330 kes Cleanup incorrect email addresses in bsmtp.
1331 kes Make bat display initial messages rather than discard them.
1333 kes First cut of adding .mod to the run command.
1334 kes Implement auto display of messages in bat.
1335 kes Enhanced preferences to allow all Bacula output to be
1338 kes Try to make bsmtp date routines more generic.
1339 kes Fixed bug #856 autochanger documentation.
1340 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1341 kes Add new cats entry point so Win32 builds.
1343 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1345 kes Do better checking for the MySQL 64 bit libraries looking for both
1346 .a and .so libraries.
1347 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1348 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1349 kes Require the thread safe version of MySQL during configure. Thanks
1350 to Andre Noll for pointing this out.
1351 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1352 continuing in migration code.
1353 kes Apply implementation of tray-monitor font derived from gnome-console
1354 submitted by Andreas Piesk <a.piesk@gmx.net>
1356 kes Eliminate important memory loss in SQLite
1357 kes Fixed the batch insert MySQL thread specific data that was not
1358 being freed. See cats/mysql.c:db_thread_cleanup().
1359 kes Fix restore before command.
1360 kes Convert old hdr.name to name() in a few places.
1361 kes Implement update jobid command.
1362 kes Return all time_t dates in db_get_job_record()
1363 kes Stop watchdog in SD earlier.
1364 kes Put Pool just after Storage in please mount message.
1365 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1368 kes Update the po files.
1369 kes Fix Verify InitCatalog by making it cache attributes.
1371 kes Change name bacula-bat to bat for man 1 page to correspond to
1373 kes Check for client and store NULL pointers in status command. This
1375 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1376 kes Fix sign extended editing of %p.
1377 kes Clean out a little old #ifdefing in cats/mysql.c
1379 kes If time diff between DIR and FD is more than 600 seconds convert
1380 INFO message to WARNING.
1381 kes Implement heap size display in status for all daemons.
1382 kes Attempt to fix MySQL db open memory loss (not successfull).
1383 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1384 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1385 Query. This looks like a MySQL but but by doing extra releases,
1386 the memory goes away. This should fix bug #847.
1388 kes When backup fails, cancel SD before waiting for sd termination.
1389 kes If SD is waiting for FD to connect during cancel, wake up the
1391 kes Fix fsf code so that errno is correctly reported.
1392 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1394 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1395 so that Bacula doesn't later stumble into a seg fault.
1396 kes Use the term Restore Client in the restore Job report.
1397 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1398 the original job's FileSetId.
1399 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1400 spooling in migration jobs. Not yet tested.
1401 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1402 reading conf file from a pipe. However, do it with open_bpipe()
1403 rather than popen. Not yet tested.
1405 kes Fix an ugly bug where the VolCatBytes were getting updated
1407 kes Implement bconsole memory command that prints current memory
1408 usage, plus smartalloc dump.
1409 kes Clarify some error messages in backup, admin, and migrate.
1410 kes Shrink label dialog to smaller size.
1411 kes Invert Cancel OK buttons on restore to be OK Cancel.
1412 kes More strerror() to bstrerror() conversions.
1414 kes Start implementing bstrerror() in place of strerror().
1415 kes Stripping path -- seems to work.
1417 kes Prevent door and port files from being restored (mostly
1419 kes Free an unreleased buffer in compat code.
1420 kes Change console Job name from *Console* to -Console- to eliminate
1421 Win32 filename problems. Put Win32 path separator when creating
1422 Console file. This fixes bug #846.
1423 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1425 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1427 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1428 to force Win32 error message.
1430 kes First cut strip path. The data should be passed to the FD,
1431 but nothing is done with it yet.
1432 kes Enhance the digest and signature routines in the crypto
1433 library to accept a JCR and to use it to print error messages
1434 so that they will go in the Job report rather than the daemon's
1436 kes Simplify some of the verify signature code.
1437 kes Simplify a few of the alternative returns in the signature
1440 ebl Use only POSIX regex instead of GNU regex in breg.c for
1441 File relocation. It fix broken freebsd compilation.
1442 kes Convert all other Dir files to use new ua class message
1444 kes Tentative fix for missing digest signature in bug 807.
1445 kes Correct handle problem in new win32_ftruncate routine.
1446 kes Convert ua_purge.c and ua_update.c to use new ua class
1447 message routines for bat.
1449 kes Correct incorrect installation of LICENSE in Win32 installer.
1450 kes Display LICENSE at the beginning of the Win32 install.
1451 kes Attempt to correct the need for the png files to be installed
1453 kes Reapply my bat.conf install script in qt-console. I think I
1454 editted bat.pro instead of bat.pro.in and it was lost.
1455 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1456 the /var/lock/subsys for subsysdir. Also corrects typos in the
1459 kes First cut update job.
1460 kes Correct configure to include qmake of src/qt-console directory.
1462 kes Make restore job yes/mod/no print in one command so GUI works.
1463 kes First cut implementing backup and restore client.
1464 kes Correct editing in Verify output that caused a seg fault.
1466 kes Insure that bat.conf is not overwritten during installation.
1467 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1468 while I was implementing migration in March 2006 !
1470 ebl Cleanup file relocation, using char *RegexWhere instead of
1471 char *where + bool where_use_regexp
1472 kes Update some manpages and add bat manpage.
1473 kes Make a first cut at converting bacula.spec.in for bwx-console
1475 kes Apply patch from John Goerzen to add hostname as fourth argument
1476 to make_catalog_backup script.
1477 kes Fix typos I introduced into bsmtp.c
1478 kes Make pm_strxxx() routines handle input of NULL pointer. This
1479 is to protect from NULL pointers returned from SQL databases.
1480 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1481 kes Add more debug to FIFO code -- fix fifo regression test.
1483 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1484 kes Add thread timer to bnet_connect() to break from OS if wait time
1487 kes Update Win32 build to include new files, new symbols, and
1489 kes Implement socket level heartbeat (tcp_keepidle)
1490 ebl Commit File relocation patch
1491 kes Make bat have 'make install' target.
1492 kes Warn during install if old gnome-console binary found.
1493 kes Warn during install if old wx-console binary found.
1494 kes Add -8 option to bsmtp command line to add content type utf-8.
1495 Fixes bug #809. (Character coding problem in bsmtp).
1496 kes If < is found in target (from, to, cc) then do not enclose the
1497 target in < > in bsmtp. Fixes bug #772 (malformed address).
1498 kes When printing certain items in dbcheck, stop after 300000.
1499 Fixes bug #822. (dbcheck loops).
1500 kes Incorrect status in Dir after waiting for mount with poll set.
1503 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1505 kes Print waiting to reserve a device every 5 mins.
1507 kes Don't call close_part in label.c if tape and relabel.
1508 kes Don't free volume if busy in close() -- should help with
1510 ebl Fix #824 RunScript bug (After script could be execute twice)
1511 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1512 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1513 Add a regression script to test RunScript
1515 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1518 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1519 deprecated. No additional bugs will be fixed, and they will be dropped
1520 in a future release (probably 2.4.0).
1521 kes Change name of wx-console to bwx-console to make it more Bacula
1523 kes Change the name of gnome-console to bgnome-console to make it
1526 kes Some time in March, a Feature Request with patch from Jorj Bauer
1527 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1529 The ability for the director to validate a Client (FD) CN against
1530 an arbitrary set of patterns rather than the hostname, with
1531 A new 'TLS Allowed CN' set of directives which are implemented
1532 in the Client resource. Then pattern matching is used in place
1533 of hostname matching against the Certificate's CN. As an example, we
1534 have certificates which (a) use a local CA, and (b) have a CN of the
1536 kes Add new/changed entry points to Win32 build
1537 kes Create unaccepted-projects for projects that are not accepted.
1538 kes Simplify locking in the reservations system.
1539 kes Add more debug code in reservations.
1540 kes Make sure error condition on reserving a volume is handled correctly.
1541 kes Correct handling of volume_in_use.
1542 kes Correct handling of initializing a device.
1543 kes Move handling of broadcasting releasing a device into release_device().
1544 kes Correct attaching dcr to dev so that it is only done if device
1545 is properly initiated.
1547 kes Locking debug level tweaks in SD.
1548 kes Tweak new Volume code.
1550 kes Add exec external-command [wait-seconds] to bconsole. This
1551 executes the external-command. Note! normally external-command
1552 should be enclosed in double quotes.
1553 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1554 it should normally be off in a production system.
1556 kes Implement die command for SD so that we can force it to dump.
1557 kes Implement SD lock debug code.
1558 kes Implement new algorithm for keeping Volume list in SD. It
1559 is now owned by the device.
1561 kes Implement new code for freeing in use volumes that should
1562 resolve if not all, some of the problems of multiple drive
1563 tape conflicts described in bug 801.
1565 kes Fix gui/bacula-web/images files in svn.
1566 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1568 ebl Fix a bug in batch mode (in string escape)
1569 kes Correct migration prune SQL typo that crept in in a
1570 recent 2.1.x change.
1572 kes Move bnet_despool() into class in bsock.c
1573 kes Modify job report to include director name and Build OS.
1574 kes Move drop root privilege and check_catalog() before fork.
1575 kes Add update database scripts (version 9 to 10) to updatedb directory.
1577 ebl Check size and age of each file after its backup to see if
1578 it has changed during backup, if 'checkfilechanges' is set.
1579 The FD will do an extra check (stat(2)) after
1580 each file backup. mtime, ctime and size are compared with
1581 'before backup' information. If time or size mismatch, an
1582 error message will be generated. You must upgrade FD to use it.
1584 kes Make database name and user configurable
1585 --with-db-name=xxx --with-db-user=xxx
1586 kes Add back database type to message.c for debugging.
1588 kes Implement dir_sql() which issues an SQL query.
1589 kes Modify bat medialist to use dir_sql() and do some minor C++
1590 formatting as well as eliminating a number of pointers, simplifing
1593 kes Fix some of the mtx-changer grep commands for tape label readers.
1594 kes Convert a number of bsendmsg into the appropriate send/warning/error
1595 message class calls.
1596 kes Suppress the using database message in the .sql command.
1597 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1599 kes Add context menu for floating a window.
1600 kes Some minor cleanup and name changes in qt-console
1601 kes Add doing mt setblk 0 in Win32 mtx-changer.
1602 kes Apply Martin's bug fix to move definition of ENODATA for
1604 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1605 sqlite2 and sqlite3.
1607 kes More pruning cleanup.
1608 kes Turn on wait_for_drive by default in mtx-changer.
1609 kes Turn on Batch insert code by default as it now passes regression.
1610 kes Add ./configure --enable-bat to enable building of Bat.
1611 No install yet though.
1613 kes Implement a new .sql command for bat.
1614 kes Implement code to turn off pruning in obtaining the next volume.
1615 Pruning is turned off for the status dir command, but turned on
1616 for SD requests and for the list nextvolume command.
1618 kes Correct Qmsg() that was not updated correctly when committing a
1619 previous change (probably the recent TLS patch).
1621 kes Write new subroutine is_volume_purged() that explicitly checks
1622 if the Volume is purged, and if so marks it as such. This should
1623 resolve problems reported about needing to mount twice to recycle
1625 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1626 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1627 amount of duplicated code.
1628 kes Do volume pruning only for the Media Type desired (reduces pruning time
1629 if multiple Media Types are in the same pool).
1630 kes Implement more detailed info in the Job report for the Bacula version
1632 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1634 ebl Add bbatch tool to bench database and insert mode.
1635 Fix sql quote stuff in batch mode
1636 Fix sql stuff for mysql
1638 kes Correct problems with am/pm scheduling. Fixes bug #808.
1639 kes Implement new prunning code that prunes up to 1000 jobs at
1640 the same time. The same technique can be applied to a number
1641 of other prune/purge subroutines.
1642 kes Add an insanity check when starting a new tape job to ensure
1643 that the tape position has not been changed. If so fail the
1645 kes Fix Win32 build for dlls to add the folllowing:
1646 src/lib/bsock.c -- new file with new entry points
1647 src/lib/dlist.c -- new entry points
1648 src/cats/sql_create.c -- new entry point
1649 src/cats/sql_cmds.c -- new DATA item exported
1651 ebl batch mode cleanup bscan-test is ok now.
1652 kes Implement SD code to check length of disk volume before appending.
1654 kes Correct return status on db_batch... routines.
1655 kes Add call to db_write_batch_file_records() to migration code.
1656 ebl Fix AfterJob timing
1657 kes Move the checking of the database in initializion of the Director
1658 to after we drop privileges. This avoids the need for both root
1659 and bacula access to the DB.
1660 kes Correct a misplaced variable definition in src/filed/backup.c
1661 kes Correct how the new batch insert db_create_attributes_record()
1662 uses the arguments. Caused a seg fault in bscan.
1663 kes Implement lock() and unlock() methods in DEVICE class.
1664 Implement block() and set_block(xx) methods in DEVICE class.
1665 kes Modify bnet_connect() so that it uses time() to check for the
1666 wait time expiring (on some OSes, some system calls may not
1667 return immediately).
1668 kes Modify Verify to obtain the previous JobId when it is actually
1669 running rather than at schedule time (as it was in 1.38.x).
1670 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1672 kes When checking pid in pid file, continue running if the pid is
1673 the same as ours. This occurs on IRIX after a system crash.
1676 kes Extend new GUI API.
1677 kes Make the ua structure a class, and implement send_msg(),
1678 error_msg(), warning_msg(), and info_msg().
1680 kes Apply fix from for building wx-console on the Mac from
1682 kes Implement new select mechanism for GUI programs.
1683 kes Reorganize initialization of stackedWidgets in bat.
1685 kes Add updated nagios plugin supplied by Christian Masopust.
1687 kes More bat implementation.
1688 kes File migrate bug with Pool Occupancy using mediaid instead
1689 of jobids. Fixes bug #795.
1690 kes Fix orphaned buffers in filed backup and verify due to
1691 crypto buffers not freed during errors. Fixes bug #789.
1692 kes Extend new GUI api code to tree commands.
1693 kes Ensure that tree and dot commands check console ACLs.
1694 kes Permit marking directory with trailing slash.
1695 kes Allow 20 console connections (instead of only 10).
1697 kes Add smartctl call to bacula-sd.conf as an example of getting
1700 kes Modify jobq.c to let simultaneous restore jobs run. This may
1701 cause them to fail if they cannot get a drive.
1702 kes Add Client Connect Wait to Storage daemon to permit users to
1703 modify the time the SD waits for a FD connection.
1705 kes Correct virtual changer check which was backwards. This caused
1706 volumes to be unloaded into slots already occupied.
1708 kes Apply Command ACL filter to JobId list in restore command.
1709 kes Correct typeo in var.c patch.
1711 kes Don't let Bacula prune File or Job records for the current Job.
1712 kes Fix variable substitution pad + inc bug reported (with patch)
1715 kes Correct SQLite log table index as reported by Luca Berra.
1717 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1719 kes Begin implementing new comm signals for API.
1720 kes Fix a few places in lib/message.c where the open fd may
1722 kes Continue implementing lib/bsock.c (real class). Make jcr,
1723 who, host, and port private. There are new methods to access
1724 them for non-class use. This required touching a number of files.
1726 kes Add LANG=C to autoconf/randpass so it works with languages other
1727 than English. Fixes bug #788.
1729 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1731 You will not be able to generate Include/Exclude list any more.
1732 It will be fixed soon.
1733 If you want to use this, you can apply
1734 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1736 kes Restore of sockets created false error messages because Bacula
1737 no longer restores sockets, but the code was still trying to
1738 set the attributes on a non-existent file. Reported by a user.
1739 ebl finish RecyclePool feature
1740 Media will takes Pool.RecyclePool
1741 when moving from Scratch to a Pool or when user will do
1742 update volume=xxx frompool
1743 To use it, add RecyclePool = aPool to your Pool resource
1746 RecyclePool = Scratch
1750 kes Expand new BSOCK class adding signal() and new BNET signals.
1751 kes Begin enhancing the dot commands adding a new API function
1752 that returns more information and will make it easier
1753 to interface to the Director from a program.
1755 kes Make DEVICE fd private. Its new name is m_fd, and can be
1756 obtained with dev->fd() outside the class. This is the
1757 first of many DEVICE members to be made private.
1758 kes Implement Michael Renner's idea on having a virtual disk
1759 changer. I made some minor modifications (e.g. I did not
1760 implement the Virtual Changer directive, but simply set
1761 the Changer Command to an empty string.
1763 kes Implement a BSOCK send() method that writes the whole record
1764 in a single write() request rather than in two.
1765 ebl add update volume=xxx recyclepool=yyyy
1766 volume takes recyclepool from pool when using update volume=xxx from pool
1768 kes Fix encryption deblocking bug, which caused some restored files
1769 to be truncated. This fixes bug #763.
1770 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1771 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1773 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1774 ebl Use btime_t instead of uint64_t in media patch.
1776 kes Optimize the use of the database a bit in the Status dir command.
1777 Only open it when needed, ensure that if any previous database
1778 was opened, it is closed.
1780 kes Correct VolCatBytes bug from media patch.
1781 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1782 in the case of orphaned records.
1783 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1784 and File records in 300K chunks to be more efficient. This
1785 idea came from Juan Luis Frances (if I remember right).
1786 kes Apply Eric's scratch patch that moves a purged Volume to
1787 the RecyclePool. Question: how is RecyclePool set? what
1788 happens to the ScratchPool?
1789 kes Apply Eric's media patch that collects read/write media
1790 times as well as byte counts. This patch requires a
1791 simultaneous upgrade of the DIR and SD. Note, there
1792 should be some way to turn off timing. I'm not sure
1793 times are in Bacula units.
1794 kes Apply Eric's batch-insert patch.
1796 kes Update projects list.
1798 kes Implement Include/Exclude file lists in FD as dlists using
1799 the new dlistString class. This permits efficiently having
1800 large include/exclude lists and completes project Item 25.
1801 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1802 console is authorized to cancel the job. This fixes bug
1804 kes Modify SD so that the VolCatJobs medium record is updated
1805 at the beginning of a Job rather than the end. This
1806 fixes bug #775 where exceeding MaxVolJobs caused jobs
1808 kes Added a mutex around getting and setting Volume information
1809 so that multiple simultaneous jobs will single thread.
1811 Switch to using Subversion
1812 kes Remove src/pygtk-console/ from configure
1814 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1815 plus the entrypoints.
1816 kes Apply patch supplied that corrects debug print
1817 in canceling jobs for max run time. Supplied as
1818 part of bug #621, which was previously fixed.
1820 kes Test on job_canceled() and sd_msg_thread_done inside
1821 loop starting the message thread to avoid a race condition.
1823 kes Remove rl_catch_signal from console.c as it conflicted
1824 with the header definition. Fixes bug #765.
1825 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1827 kes Clarify some stored/acquire messages to indicate if the
1828 problem is with read or append.
1830 kes Fix memory leak with storage ids in cats/sql_get.c
1831 kes Terminate watchdog earlier to avoid reference to released
1832 memory -- reported by Jason Austin.
1833 kes Move closing the database from jobq.c to the director daemon
1834 termination routine. This fixes memory leaks for shadow jobs
1835 (i.e. migration jobs).
1836 kes Free up the unique jobid chain items in migrate.c. This fixes
1837 a memory leak problem.
1838 kes Convert some ugly looking for statements to use foreach_alist
1839 in findlib/find.c. This will facilitate converting the structures
1840 to use dlist (for large include/exclude lists).
1841 kes Fix a bug in the btree.c and btree.h routines, then rename them
1842 rblist and add them to be built in src/lib. Include some new
1843 methods written by Rudolf Cejka that make the code more readable
1844 (hides some of the ugly casting).
1845 kes Add set_next() and set_prev() methods which make the code much more
1846 readable. Also add a new dlistString class that facilitates storing
1847 strings in dlists. To be used in the large include/exclude lists.
1848 kes Make some trivial modifications to lib/tree.h that use rblist
1849 rather than dlist for storing the tree links. This was suggested
1850 by Rudolf Cejka. The result of this is that the restore tree now
1851 uses red-black binary trees rather than simple linked lists. This
1852 should give rather dramatic speed improvements for directories
1853 contining large numbers of directories/files (more than 10000).
1855 kes Fix maxruntime bug #621.
1857 ebl Implement the include JobID in spool file name project.
1858 kes Reorder projects file in order determined by Jan 2007 vote.
1859 kes Implement item #12 on project list -- quick release of FD by
1861 kes Fix open of SQLite3 db where user does not have write permission
1862 so that DIR does not crash. Fixes bug #761.
1864 kes Add back missing @ in Win32 Makefile.
1865 kes Change 'Device not configured to autolabel' from INFO
1867 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1868 which should restart an indefinite # of times.
1869 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1870 other DIR specifications.
1872 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1873 Fix path quoting in SQLite scripts.
1874 Fix problems with SHGetFolderPath.
1876 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1878 kes Fix Job restart on error bug that promotes an Inc to a Full
1879 backup. This should fix bug #755.
1880 kes Add qt-console and first cut of code.
1884 kes Fix Bacula->Documentation link on Win32 to point to index.html
1885 instead of bacula.html. Fixed bug #750.
1886 kes Return JobId in db_get_job_record() when JobId==0. This should
1888 kes Do not release source pointers when restarting a failed job.
1890 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1891 This *should* fix bug #747.
1892 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1895 kes Modify USTORE constructor to set an empty store_source string,
1896 and don't copy the store_source string in a cancel. Hopefully
1897 this will fix Arno's seg fault, bug #744.
1898 kes Add back code to disable conio in configure. Fixes bug #743.
1899 kes Correct the Options scanner in the FD to correctly handle
1900 SHA1 option, which was eating the next option. Reported by
1902 kes Add code to indicate when the SD is spooling, spool wait, and
1903 despooling as requested by Alan Brown.
1905 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob