1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
29 ebl Fix autoselect option broken for a while. Fix #1089. Need some
30 work with StorageId to be able to use a particular drive in a
33 ebl Rename faketape to vtape.
34 ebl Update faketape driver.
36 ebl Modify faketape driver to avoid sparse file.
37 kes Add make clean of qt-source directory during ./configure
38 kes Store last block number written to tape in DEVICE and
39 use it for testing for correct last block on EOT.
41 Release Version 2.4.0:
45 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
48 kes Add create_postgresql_database.sql to Win32 installer. Should
49 fix problem reported by Juilio Monteiro.
50 kes Get correct slot when auto unloading a device. This fixes bug
53 kes Fix multiple media restore.
54 kes Make DEVICE Slot private and access it via a method.
55 Allows better control over when it is set and cleared.
56 kes Fix possible seg fault if SQL error.
58 kes Add Martin's fixes to argument scanning for the estimate
59 command. This fixes bug #1093.
60 kes Add debug code to SD.
61 kes Fix renaming a Volume, which used the wrong Volume name.
63 kes If operator has rewind tape, print warning, release tape and
64 try once more. If tape is positioned somewhere, something went
65 wrong, so mark the tape in error and try once more. Previously
66 this error was fatal, now it produces an error message.
67 kes Ensure correct volume name displayed during restore
68 kes Ensure that Volume is mounted for restore.
70 kes Fix a few more Coverity reported problems.
72 kes Apply Allan Black's status dir job count patch.
73 ebl Add information about IMPORT/EXPORT slots in mtx-script.
74 kes Enhance a couple of SD debug messages.
75 kes Tweak unload flag setting and ensure it is set during swap.
77 ebl Fix #1091 about bad output in estimate command.
79 kes Modify autochanger locking to attempt to avoid race
81 kes Make sure device not busy before doing label command.
82 kes Display open() errors except when polling. Previously too
83 many were suppressed. This should fix bug #1070.
84 kes Fix Win32 reparse points. Bacula will not recurse into any
85 reparse point directory, including mount points, unless the
86 directory is explicitly mentioned at the top level (same as
87 with Unix). A file that is linked to another file will be
88 backed up -- much as Unix does for hardlinked files.
91 kes Remove double quotes from ChangeLog and ReleaseNotes
92 kes Remove StorageId test when pruning and recycling (Eric's changes).
93 kes Remove old form of locking when getting volumes -- causes deadlock.
94 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
95 the name unique and to eliminate compile time error.
96 kes Add accurate.o to Win32 FD Makefile
98 kes Fix cats dll build on Win32 after db_update_job_end_record
99 calling sequence change.
100 ebl Switch to tokyo dbm instead of htable in accurate code
101 ebl Include tokyo dbm to bacula source tree
103 kes Fix buffer overruns detected by Coverity.
105 kes Tweak joblog display.
107 kes Implement --without-qwt
108 kes Fix layout of restore tree dialog
109 kes Add configure bat QWT libraries, so that bat can be built
110 with or without the QWT libaries.
112 ebl Add dummy tape driver for regression tests.
113 kes Make sure we unload the right slot when swapping.
115 kes Add debug times, reduce size of two-pool-changer test
117 ebl Tweak autoconf scripts for faketape
119 kes Improve SD reserve debug code.
120 kes Testing an improvement to free up volumes no longer in use.
122 kes Rework SD acquire for read to handle autochanger Volume
124 kes Implement regression that explicitly tests swapping a Volume
125 from one drive to another.
126 kes Enhance disk-changer to detect most error conditions.
127 kes Fix SD code so that it properly swaps a Volume between drives.
128 This fixes bug #1083.
130 kes Apply libdbi patch from Joao Freitas for regress and for
131 Bacula trunk. Regress now works with libdbi. Nice.
132 kes Apply .nobackup patch from bug #1077 submitted by
134 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
135 name into jobs cloned via the run directive.
137 kes Prevent a Volume that is being swapped from being freed from
138 the volume list. This will most likely fix, at least partially,
140 kes Fix strippath so that it does not get a buffer overrun and crash FD.
141 This fixes bug #1078.
142 kes Remove 50 millisec wait in SD that broke debugger.
143 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
144 that a job may run, counted from when the job was scheduled.
145 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
146 a job may block waiting for a resource, counted from when the job starts
147 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
148 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
149 that implements multiple commands per line in the console when using
150 readline. Modify the default to use a semicolon as the command separator.
152 ebl Fix SQL query in migration code.
153 ebl Make accurate mode with hash disk pass regression tests
155 ebl Implement first cut of accurate backup with hash disk.
157 kes Force unload of volume when wrong volume mounted in SD.
159 kes Fix bat seg fault at termination.
160 kes Add Bacula generated version to bat about box.
163 kes Experiment with allowing multiple read jobs.
164 kes Move final volume swapping code to DCR method and
165 call it from acquire_for_read().
166 kes When wrong volume is mounted during read, unload_autochanger.
168 kes Integrate the libdbi changes from Joao Henrique Freitas
170 kes Stop searching for Volumes in SD askdir if DIR returns the
171 same volume name twice in a row.
172 kes Close bat console windows first to eliminate error message
175 kes Tweak the swap Volume from one drive to another code so that
176 it now seems to work.
177 kes Resolve several problems with recycling that broke the new
178 code (these problems are in 2.2.9 as well).
179 kes Remove the volume lock when calling the sysop code.
180 kes Don't mark a reserved volume with no writers as unused otherwise
183 kes Rework class structures for VOLRES, DCR, and DEVICE to make
184 the method names a bit more logical, and for more logically
185 handling the responsibilities.
187 kes Remove redundant code in terminating the scheduler that just
188 causes a seg fault in many cases.
189 kes Cleanup releasing a volume and make it a DCR method.
190 kes Improve algorithm for detecting pre-reserved volume and
193 kes Tweak volume swapping code so it works.
194 kes Correct name overloading in mount.c
195 kes Replace released flag in VOLRES with reserved and add access
196 methods for the VOLRES class.
197 kes Prevent volume from being released while being swapped.
198 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
200 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
202 kes Refactor parts of stored/mount.c
204 ebl Add sanity checks for VolWriteTime and VolReadTime
205 ebl Take care of bad clock changes while computing VolWriteTime
206 and VolReadTime. This should fix or limit #1066
207 kes Correct error string numbers in dird/catreq.c
208 kes Restructure reserving, acquiring, and mounting volumes. Calls to
209 autochanger are deferred for mount.c -- simplifes the code.
211 kes Do not prune any running job. It just fails the job.
212 kes Lock the volumes when changing dev->reserved_device and marking
213 the volume unused otherwise the device can get reserved by
214 another job before the volume is released, thus blocking it.
216 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
217 kes Fix bug #1063, reuse of freed ptr in list nextvol.
218 kes Release regex compile buffer in filed/job.c
219 kes Add proper type of const char in sql_create.c
220 kes Turn off debug in daemon termination routines
221 kes Move free_volume_list() before devices are freed in stored.c
222 kes Fix reference to uninitalized stack variables in bregex.c.
223 This should correct bug #1067.
225 kes Fix possible seg fault in SD when freeing a volume entry.
227 kes Implement unload_dev() before swap device.
228 ebl Add statistics prunning with option and menu
229 kes Separate unload_dev() from unload_other_device() in autochanger.c
231 kes Apply patch from bug #1069 that corrects spurious error messages
232 when ACLs enabled on SGI but no ACL exists.
233 ebl Fix small segfault in bacula-sd when debug level is 500
234 kes Modify run_program() and run_program_full_output() to use
235 call by reference for the results string. This corrects a long
236 standing problem where the address of the string may be changed
237 in the subroutine but not in the calling program.
239 kes Re-enable code to remember last volume mounted on a non-tape
241 kes Add patch supplied in bug #1068 that fixes a SD crash when using
242 a Virtual autochanger.
243 kes Generate correct JobMedia records during spooling/despooling when
244 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
245 <tih@hamartun.priv.no> for excellent analysis and testing.
247 kes Tweak hash algorithm for htable using Martin Simmons idea
248 for doing a circular shift.
249 kes Remember what volume is in VTLs (previously turned off for
251 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
252 pointed out some problems in creating JobMedia records during
253 spooling with concurrent jobs. Fix the problem by updating the
254 start file position before despooling and generate a jobmedia
255 record at the end of despooling.
257 kes Fix handling of JobMedia records during spooling and when a
258 Volume is changed without actually writing data to the Volume.
260 kes Rework certain SD locking based on gdb tracebacks of deadlocks
261 sent by Eric. This code now uses only the volume_lock() rather
262 than the reservations lock when at EOM and acquiring a new
264 kes Ensure only one exit point in several subroutines.
266 kes Implement bsock code to permit locking. Use the new code in Verify
267 in the FD to prevent the heartbeat thread from disrupting the Verify
268 data sent to the Dir.
269 kes Modify SD locking to eliminate locking the reservations system from
270 outside the system. Use the volume lock when getting media data
271 and reserving a new volume at end of media.
272 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
273 when SD starts are not locked into place.
275 kes Fix error compiling runscript code on 64 bit machines.
276 kes Tweak Win32 mount point code.
277 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
278 cleared giving bad file estimate).
279 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
282 kes Keep Schedule run lists in order as suggested by
285 kes Implement autostart scripts for Debian.
286 ebl Implement upgrade catalog scripts.
288 ebl Apply jobstat patch for long term statistics. Have to implement
289 purge stats command and upgrade scripts.
290 kes Fix mtx-changer.in for broken Debian mt program.
292 kes Fix large number of JobMedia records reported by Eric Bollengier.
294 kes Apply doc fix from bug #1062.
295 kes Resolve crash and improper restore wx-console Win32 restore
296 GUI. Fixes bug #1065.
297 kes Update Win32 wxWidgets to latest version.
298 kes Attempt to do correct handling of Win32 mount points. Should
300 kes Fix Win32 FD backup/restore memory leak due to improper termination
301 of BackupRead/Write. This fixes bug# 1038.
303 ebl Reduce memory usage for accurate backup, working only with ctime
304 and mtime. (not all Lstat field)
305 About 40MB for my linux system (400.000 files)
307 kes Add dcr->reserved_volume flag that allows us to release a volume
308 even if it is not vol->released. This allows maxvol2 to work when
309 Volumes expire and we are already writing to the device (i.e. a
310 volume is pulled out from under us by another job terminating after
311 we reserve the drive).
313 ebl Permit multiple command/console per runscript definition.
314 RunScript { command = /bin/true ; command = /bin/false ... }
315 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
316 (restart an application) just after the VSS snapshot on windows.
317 kes Don't zap dcr values during release_volume() as they might
318 have the next Volume to be mounted.
319 kes Fix AIX prototype.
321 kes Second cut of drive switching during backup.
324 kes Update Win32 version of wxWidgets to most recent version.
325 kes Tweak Copy job details.
326 kes Rework dir_find_next_appendable_volume to make a bit more effort
327 to find a suitable volume before giving up.
329 kes Make ask_sysop_to_create... to return if waken from wait.
330 This helps get out of blocked conditions.
331 kes Experimental implementation of switch_device in reservations.
332 kes Implement FD version to allow easier protocol changes.
333 kes Add Plugin Options string -- not yet passed to FD.
334 kes Implement PluginOptions ACL.
336 kes Attempt to correct problems with restores with autochangers and
337 use counts going negative
338 kes Rework SD status command and implement API for bat. Implements
339 header, runing waitreservation, devices, volumes, spooling,
340 and terminated status keywords.
341 .status storage=xxx <keyword>
342 kes Clarify TLS error message by adding double quotes around name.
343 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
344 kes Pass jcr to tls routines so debug messages can be handled better.
345 kes Rework jobq resource allocation code, and possibly fix a bug
346 that caused reference counts to get out of sync.
348 kes Rename fd/dir plugin to use Bacula standard underscore.
349 kes Plugin work -- bring dir up to fd level.
350 kes Start implementation of VTL code
351 kes Fix Win32 build after adding new cats subroutine.
353 kes First cut at Duplicate Job implementation.
355 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
356 kes Start PluginOptions string, and refactor a bit of ua_run.c
357 ebl Apply Allan patch that permit to reset recyclepool.
359 kes Test patch -- possible fix or improvement for bug #1053
360 kes Refactor FD and SD status commands to permit new API code in
361 SD, and to fix Win32 build.
362 kes Win32 build is now working.
364 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
365 some ideas in patch from Scott Bailey.
366 kes Begin implementation of duplicate Job control.
367 kes Fix some of Win32 build after recent additions.
368 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
369 which causes the FD to detect whether or not the OS has the
370 honor no dump bit (*BSD systems), and if so, to skip backing up
371 any file with this bit set. The feature is enabled by setting
372 'honor no dump flag = yes' in the Options section of a FileSet.
374 kes Correct po warning message with datarootdir
375 kes Implement more code in dird.c to put configuration parsing in
376 a class rather than use globals.
377 kes Restructure SD status command for implementation of bat API
380 kes Suppress incorrect 'Will not descend from x into y' messages.
381 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
382 daemon globals used by parser.
383 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
385 kes Fix free of plugin_list when none exists.
387 ebl Apply accurate project patch.
389 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
390 on non-mempool object)
391 kes First cut of converting FD .status to work with bat API.
393 .status client=XXX header
394 .status client=XXX running
395 .status client=XXX terminated
396 kes Implement first cut of Copy Job.
397 kes Implement Catalog in Pool resource. It overrides catalog specified
398 in the Client resource.
400 kes Apply patch (with some difficulties) from Joao Henrique Freitas
401 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
403 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
404 ftruncate() actually works. In the case of some (cheap) NAS devices,
405 it does not, and so recycling NAS Volumes does not work. The code
406 simply unlink()s the file, then recreates it. This fixes bug #1011.
408 kes First incomplete cut of big malloc blocks for htable.
409 kes Tweak plugin code.
411 kes Plugin debug code + tweak a couple bat dialog layouts
413 kes Fix creating first JobMedia record during Migration to include
414 proper index. This caused slow restores of migrated jobs.
415 kes Temp fix to plugin name file_index.
416 kes Bacula backed up and restored a MySQL database.
418 kes Implement plugin restore.
419 kes Implement parsing of db_driver to give db_type index.
421 kes First cut of plugin restore code.
422 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
423 and do not strip paths on symbolic links.
424 kes Set catalog backup database and user name from values specified on
425 the ./configure line.
426 ebl Fix #1031 about wrong pool source information in job report.
429 kes Remove a redundant jcr argument to find_files, match_files, and
431 kes Implement '.status dir header|scheduled|running|terminated' that
432 prints the requested status section. With the exception of the
433 header, the other reports have fields separated by tabs (\t).
435 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
436 a resource embedded run command to find a since time if no explicit
437 since time was supplied on the command line.
438 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
439 that updates the state file at job termination time in addition to
440 when the daemon terminates.
442 kes First version where a plugin did a backup.
443 bpipe-fd.so created a backup file, wrote a test
444 string to it, and Bacua could restore this fabricated file.
446 kes Implement DB Driver = string for the DBI driver.
447 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
448 kes First cut of code for loading Win32 plugin dlls. Implement
449 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
450 and implement a dlfcn.h file based on opengroup's definitions of
453 kes First cut plugin directives.
455 kes Apply patch from bug #1049 to prevent stripping the path on a
457 kes Attempt to fix bug #1047 where stripping a path corrupts the
458 heap. Waiting for feedback.
459 kes Correct the Mount message not to suggest labeling a new tape
460 when doing a restore. Submitted by email by John Stoffel.
461 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
462 FD by using casting. Reported in bug #1042.
464 kes A bit of crypto cleanup. More later.
466 Release Version 2.2.8
468 kes Apply patch from Martin to correct bug #1040, bscan sets existing
470 kes Fixed important spelling error in doc -- bug #1045.
472 ebl Fix bextract to be able to extract non-portable Win32 data to
474 kes Move initialization of read/write res lock earlier in the code.
475 This fixes the crash with a null conf file. This fixes bug
477 kes Redefine CURES in lib/parse_conf to be URES and move it all
478 into lib/parse_conf.c -- this responds to bug #1042, but does
479 not fix it. The fix is not to compile with FORTIFY_SOURCE.
480 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
481 the trunk SVN. I don't think this was reported as a bug.
483 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
485 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
487 kes Add DataDespooling and DataCommitting status (committing is
488 the last despooling).
489 kes Finish implementation of new reservations code noted below.
491 kes Fix bsnprintf for float point numbers. I broke recently when
492 parameterizing some variables. This fixes bug #1036.
493 kes Undo recent reservations changes ... will apply them later
494 when they work better.
496 ebl Fixes #1034 which cause mysql to hang the connection after 8h
497 ebl Change default statistics target of filename.name and path.path
498 fields for PostgreSQL. This speeds lookup by indexes. Thanks
500 kes A few more tweaks to new reservation code. Make sure to clear
501 vol released flag when retaking volume. When reading label and
502 label is bad mark volume unused. When recycling, mark volume
503 unused so it can be renamed.
505 kes Fix reserve_volume() so it doesn't release a volume in use
506 (i.e. a volume entry not marked released). This should be
507 the last part needed to fix bug #1018.
509 kes Move Heartbeat documentation from Job to Director resource.
510 This fixes bug #1033.
512 kes Fix existing switch drive SD code to call autochanger to release
513 any old volume. This must be done to keep the autochanger from
514 releasing subsequently newly reserved volumes in doing a close().
515 This should fix bug #1018.
516 kes Fail if attempting to get console input in batch mode. This
517 should help fail RunScript console commands that are incomplete.
518 kes First cut implementing switch_drive() in SD (not actually called).
520 kes Implement first cut running console commands in a RunScript.
522 ebl Fixes bug #1028 where 'Selection Type' option was not usable
524 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
527 Release Version 2.2.7
529 kes Add new free_tls() entry point so that Win32 builds.
530 kes Fix compile warning in src/lib/util.c
531 kes Fix entry point for edit_job_codes() so that Win32 builds.
532 kes Fix seg fault Frank Sweetser reports in regression testing
533 on his systems. The problem was that the original author of
534 bsnprintf.c did not take into account the side effects of
535 using ++x in the argument to a #define.
536 kes Make SD protocol backward compatible with version 2.2.x.
538 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
539 because Bacula no longer restores sockets.
540 ebl Always use ignorecase fileset option on win32 FD.
542 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
543 that implements double quoting include names in conf files,
544 and also allows piping input by having the first character
545 be a vertical bar (|).
546 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
547 that implement %f in RunScripts to pass the FileSet name.
548 kes Skip leading | when lex input comes from a pipe as suggested
549 by Michael Stapelberg <michael@stapelberg.de>.
551 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
552 Nerijus Baliunas <nerijus@users.sourceforge.net>
554 kes Implement Plugin Directory and plugin events.
556 kes Implement a security enhancement: TLS authentication but no
557 encryption. Enabled by setting 'TLS Authentication = yes'.
558 Note when this is on, TLS encryption is turned OFF!
560 kes This patch corrects a problem where the maximum concurrent storage
561 jobs counter gets out of sync during restore jobs causing jobs to
562 'wait on max Storage jobs'. This patch fixes bug #1009.
564 kes This patch fixes bcopy so that it produces correct Volumes.
566 kes This patch eliminates spurious output to the console during a VerifyVolume
567 job that contains encrypted data. It fixes bug #1024.
569 kes This patch prevents the 'status dir' command from trying to use a scratch
570 volume and possibly moving it from one pool to another. This patch fixes
573 kes Add new include to postgresql.c suggested by Marc Cousins so
574 that it compiles correctly with pgre version 8.3.
576 kes Fix --archivedir addition to configure. Replace it with
577 --with-archivedir in configure.in This fixes the regression
579 kes This patch fixes bug #1012 where the job is canceled because
580 of Max Run Time exceeded when the job has not yet started.
582 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
583 one 'part' to write. Instead of each part being stored on disk,
584 written to DVD, then deleted from disk, all parts are written to disk,
585 and only the last is written and deleted from disk.
586 kes This patch fixes the status command to include the formating string for
587 JS_AttrInsterting. It fixes bug #1021.
588 kes This patch should fix the Mac OS X build problem on the latest
589 Darwin, where sys/types.h was not included correctly (apparently
590 due to a change in the Mac headers). The solution was to explicitly
591 ensure that it is defined for the ./configure.
592 This patch also has a rebuild of configure that includes the Debian
593 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
594 kes This patch should ensure that queued messages to the console are
595 displayed as soon as possible. It should fix bug 1007, but has been
596 reported not to work.
598 kes This patch fixes the infinite loop when trying to increase the
599 maximum number of volumes in a Pool during the add command.
600 This patch fixes bug #1008.
602 Release Version 2.2.6
604 db Remove extra data on estimate command in joblist for bat.
606 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
607 really change anything, but is the beginning of doing it *right*.
608 To do it completely right the LastWritten date must be passed to
609 the SD, but it is not yet done.
610 kes Minor tweaks to some bat restore SQL.
611 kes This patch fixes bug #1003 where putting the message output from
612 a Verify job into the catalog results in a recursive loop. The problem
613 seems to show up only with postgresql (to be verified).
614 kes Correct %x to %p in postgresql debug statement.
616 kes Fix bug #942 where lots of emails where generated when the heartbeat
617 interval was low and Bacula wanted a different tape from the one in
620 ebl Add new SD despooling attributes and Dir inserting attributes
621 job status codes in the catalog (Status table).
623 ebl Use qmake-qt4 instead of qmake when available (debian system).
625 kes Add a security warning to src/cats/make_catalog_backup.in indicating
626 that passing the password via the command line (arg 3) is insecure.
627 This responds to bug #990 (it doesn't fix it).
629 kes Set default debug_level to zero. This corrects bugs #991 and #993.
630 kes Fix a crash in bat when it cannot connect to the Director for example
631 if the Director is not running.
632 kes Remove redundant INDEX (JobId) from File table in the trunk.
634 kes Make explicit exception to GPL in LICENSE to permit linking
635 the Win32 FD with Microsoft VSS code.
636 kes Apply the Solaris package patch from
637 Masopust, Christian <christian.masopust@siemens.com>
638 kes Apply the patch to optionally add a timestamp in the debug output
639 submitted by Mariusz Czulada <manieq@wp.eu>.
641 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
642 backend (sql_strerror). Fixes bug #989
644 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
645 It applied with no problems.
646 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
648 kes Redirect stderror to stdin on mt status command in mtx-changer.in
649 since the status is returned on stderr on Solaris.
650 kes Activate Close button on tray-monitor window. This fixes
652 kes Check for NULL item in parse_conf.c before calling it. In the
653 case of Device, there is no item and this caused a seg fault when
654 Device appears in the conf file.
655 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
656 avoids pulling in config.h multiple times in some new code.
658 kes Fix spurious warning message printed when creating a volume with
659 a LabelFormat. This fixes bug #976.
661 Release Version 2.2.5
663 kes Add JobId in place of Job name in all the Jmsg() output.
664 kes Correct the APP_DESC for the Win32 storage service (remove an e).
666 kes Make maxvol-test and new more strict maxvol2-test work.
667 kes Print JobId in all Jmsg() job output.
669 kes Add new SD despooling attributes and Dir inserting attributes
670 job status codes. This fixes bug 961.
671 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
673 kes Fix doc issue. This fixes bug #963.
674 kes Fix listing performance problems in bat. Pointed out by
676 kes Remove old debug code.
677 kes Fix bat code that tests for Win32. This should fix bug #968
678 kes Query 5 list wrong Vol after migration. This fixes bug #960
680 ebl Fix #969 where user can't change Replace option in restore menu.
682 kes Save jcr in thread specific data (tsd) for each thread.
683 kes Make Dmsg() print JobId as -%u.
684 kes Make Jmsg, Emsg, and others automatically pickup the jobid
685 for the thread if it exists.
686 kes Remove old reservation debug jid code.
687 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
688 ebl Add an option that permit to specify spool size in job
689 definition. (Applying patches/testing/spoolsize_per_job.patch).
690 You must upgrade SD and DIR at the same time.
691 dvl Add new configuration item --archivedir
692 dvl Adjust regression tests to use tmp not /tmp. This will allow
693 multiple concurrent runs of the regression tests.
695 kes Fix race condition that drops final block written to volume.
696 This happens in rare cases with multiple simultaneous jobs
697 when the Volume fills. This fixes bug #964. May be related
698 to bug #935 and possibly #903.
699 kes Eliminate more strerror() and replace with bstrerror().
700 kes Remove BSD getopt and replace with unrestricted IBM version.
701 kes Fix Win32 build for changed calling sequences.
702 kes More tweaks to the mount volume routines to get everything
703 right. Changed variable name from find to have_vol, which is
704 much easier to understand.
705 kes Enhance btimer debug code.
707 kes Fix FD->SD authorization failure, which was due to spurious
708 wakeups from a pthread_cond_timedwait(). Simply check the
709 predicate before continuing. This fixes bug #953.
710 kes Add const char where needed (more to do). Remove temp debug code.
712 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
713 kes Don't overwrite error message in check_tables_version.
715 kes Unlock batch insert tables with same calls used elsewhere.
716 kes Allow starting 59 jobs a second.
717 kes Make SD session key more random.
718 kes Add retry for SQLite opening db if it fails. Probably helps
720 kes Suppress extra error messages during batch insert failure.
722 kes Add jcr to timer packets so if killed message can be sent to job.
723 kes Add JobId to all Dmsg() output.
724 kes Put some FD auth code on dbglvl rather than fixed.
725 kes Return insert attributes error message in db msg buffer to avoid
726 false error messages. Helps fix bug #966.
727 kes Separate batch init error messages. Probably helps fix bug #966.
728 kes Make SD code that contructs attribute insert check string lengths
730 kes If Dir gets an error during inserting attributes, cancel SD.
731 This reduces unnecessary error messages.
733 kes Correct search boolean for getting Volume info
734 ebl Cleanup batch insert code. Probably fixes bug #965.
735 kes Back out one small change to the reservation system (reserving a volume).
736 kes Rework how a Volume is mounted. It is now much more intelligent and
737 will always attempt to use any mounted volume if possible and reduces
738 calls to the Director asking about volumes.
740 kes Turn off some code when batch insert not enabled.
741 kes Edit FD name in connect error messages.
742 kes Rework the reservation system to take into account that the Director
743 might give us a Volume that is different from the current one being
744 used, and to ensure that we don't exceed Maximum Volume Jobs.
745 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
746 fatal error with multiple jobs running'
747 kes Add more debug code in reservation system.
748 kes Implement maxvol-test to check bug #947.
750 kes Add code to handle tray monitor separated from Win32 FD.
751 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
753 kes Add missed return in fixing verify bug -- trunk only.
754 ebl Fix a command parser issue causing a director segfault.
755 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
757 kes Increase the max block size to 4MB fixes bug #957.
758 kes ERABT if user sets min block size > max block size. Fixes bug #956.
759 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
760 is not properly mounted (recognized) during a poll.
761 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
762 Job that has differences reports Verify OK.
763 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
765 ebl Add an option to operate on all pools with update vol parameters.
766 This complete the project 20. Patch from Nigel Stepp.
767 ebl Add history support to bconsole when using readline.
768 Using Ctrl-D to exit doesn't update .bconsole_history
769 kes Modify new volume algorithm to use max MediaId for generating next
770 volume number rather than the count of Volumes. This should essentially
771 eliminate the failure rate if some volumes were deleted. Bug #921.
772 kes Begin implemention of Optimize Job Scheduling.
773 kes Implement restore callback that Dirk and I agreed on for bat
774 restore. This fixes bug #928. Restore of backup of zero files fails.
775 kes Fix SQL Catalog logging which broke with new db_escape_string
778 Release Version 2.2.4
780 kes Fix bacula_cats.def for new db_escape_string().
781 kes Increase size of name string when FD making connection to SD.
782 May fix bug #953. FD->SD connection failure.
784 kes Add code to help Dan debug 2drive-incremental-2disk test.
785 kes Add code to try to fix bug #908.
786 kes Add waits to multiple exit detection code to try to force pid
787 file to always be deleted.
788 kes Restore good dev.tar.gz to rescue set appropriate binary property.
790 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
791 trying to switch drives by checking for blocking before unblocking.
793 kes Cancel storage daemon in all cases where FD reports error. This
794 should fix virtually all cases of bug #920.
795 kes Fix db_escape_string() for MySQL which did not compile.
797 kes Fix error message that was clobbered when Dir tells SD it does not
798 have write permission on Volume. This should fix a minor point
799 in bug #942, but not the main problem.
800 kes Add code to cancel job in SD if FD connection fails. This should
802 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
803 dvl Pass jcr and db into db_escape_string() to enable better escaping
805 kes Fix migration code to get correct Volume name with multiple volumes
806 by skipping |. Fixes bug #936.
807 kes Implement patch supplied by Landon to fix bug #944 where using
808 TLS with bconsole uses 99+% of the CPU.
809 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
811 kes Move patches into patches directory.
813 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
816 ebl Using 'm' in bconsole will show messages like before,
817 and not memory usage.
818 kes Fix bug #935, and probably also bug #903 where files were not
819 restored. MediaId was not properly set in JobMedia record after
822 kes Suppress chown and chmod error messages if the FD is not running
825 kes Apply Martin Simmons' patch that should turn off the new API usage
826 when batch insert is turned off allowing building on older
828 kes Add ./configure search in qwt-qt4 for qwt package
830 kes Bacula is now free of 3rd party GPL copyrighted code!
832 kes Add guid_to_name.c/h which replace idcache.
833 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
835 ebl Detect if new PosgreSQL batch insert API is present.
836 kes Correct incorrect mempool call causing Director crash. Occurs on
837 systems without va_copy().
838 sb Update spec files for 2.2.1 release
840 kes Fix memory pool call in ua_output.c. bug #934.
841 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
842 Add test program to fnmatch.c
844 kes Integrate patch to README.vc8 from
845 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
846 edit it to get it into Unix patch format.
847 kes Implement mkpath.c to replace old FSF makepath.c
849 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
851 Release Version 2.2.1
853 kes Update POTFILES.in
854 kes Cleanup a few underquoted AC_DEFUNs in configure
855 kes Apply patch from Martin Simmons that adds a test for va_copy to
858 kes Fix bug #921 by increasing the number of tries to create a new volume
860 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
861 can be called multiple times. Implement a version for machines
862 without va_copy() that gets a big buffer.
864 kes Integrate more portable zone offset code into bsmtp.c
865 Submitted by Attila Fülöp.
867 kes Fix bad SD->FD return status reported by
868 (James Harper) <james.harper@bendigoit.com.au>
869 ebl Fix a bug in read_close_session which return random status
870 thanks to James Harper
872 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
873 and directory names during restore of single file/directories.
874 kes Add sanity checks to .sql command when string is empty. Hopefully
875 that will resolve Dirks Director crash.
877 kes Apply patch submitted by Martin Simmons that corrects a seg fault
878 in the bsmtp chat subroutine when debug is >= 10.
880 kes Fix Director crash when running bat SQL queries.
881 kes Add David's notes on Item 8: Copy pools.
883 kes Rework projects file to be current and ready for a vote.
884 kes Enhance lex scanner error message.
886 kes Tweak LICENSE file to mention BSD code.
887 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
888 if specified on the ./configure.
889 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
890 This class is intended to allow us to open a second bsock to the
891 Director while in the restore subdialog.
893 kes Fix configure to create bat Makefile before creating dependencies.
894 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
895 kes Add a tooltip to the tray monitor.
896 dvl Set the Director's PID file before dropping privs. This fixes
899 kes Update AUTHORs file
900 kes Increase the default max concurrent jobs to 20 in FD and SD to
901 correspond with the default .conf files.
902 kes Rewrite the Win32 service routines. This eliminates the 3 copies
903 some different, of the same file created by RN when porting the
905 kes Rearrange some of the Win32 directories and the placement of the files
907 kes Set DEVELOPER flag in version.h
909 ========================================================================
910 Release Version 2.2.0
912 kes Apply a second doc patch from Marc.
913 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
914 improves the tips section that discusses how to setup multiple
917 kes Update bat README file.
918 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
919 corrects a typo in the Recycle status check in db_find_next_volume().
920 This will probably fix a number of annoying problems with multiple
922 kes Modify most of dird/msgchan.c to use bsock class calls rather than
923 bnet calls -- no functionality change.
925 kes Modify the Verify output to specify if files are missing on
926 the Volume(s) or disk. Fixes confusion in bug #916.
927 kes When more than one Volume is read in a migration job, the last
928 Volume bytes reported are from the last read volume rather than
929 the last written volume. Fixed. This fixes bug #910.
930 kes Fix display of Recycle flag after update volume=foo recycle=yes.
931 It previously printed New Recyle flag is: no. This fixes bug
934 kes Correct seg fault when switching tape drives during restore.
935 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
936 be used until after 2.2.0 release.
938 kes Remove fnmatch() in SD that permitted wild card specifications.
941 kes Fix %g in filename returned by SQL for browse tree reported by
943 kes Fix configure so that it puts config.out in the cwd rather than
945 kes Attempt to fix the locking problem reported by Eric in bug #906.
946 kes Make berrno class to leave errno unchanged after constructor call.
947 kes Make bnet_server use the heap rather than the stack to allocate
948 its socket fd pointers to avoid a crash at termination. Problem
949 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
951 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
952 and putting it in depkgs-qt along with Qt4.3.
954 kes Rework code in acquire.c that switches drives for reading when
955 the Media Type does not match. This should fix bug #906
957 ebl Fix a director segfault during job setup #907
958 kes Correct seg fault in postgresql when first operation returns no
959 rows. Fixes Dirks File browser problem seg fault with bat.
961 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
962 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
965 kes Implement PopUp YES/NO dialog for bat.
967 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
969 kes Correct RunScript to terminate job in FD on failure.
970 kes Change abort_on_error and AbortJobOnError to fail_on_error
971 and FailJobOnError in RunScripts.
972 kes Minor tweaks of code formating in RunScripts, principally to
973 avoid depassing 80 columns.
975 kes Eliminate one #ifdef Win32 in bsmtp
976 kes Implement grow tool to grow a file for testing very large databases.
977 kes Add big-vol-test to test Bacula seeking with > 5GB.
980 kes Modify find_next_volume() to return all values in Media record.
981 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
985 kes Update Release notes
987 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
988 Warning, in previous beta version, all media get from scratch keep their
991 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
992 This should fix bug #842. Made a note to look at removing the temp
993 files at the end of the install.
994 kes Add ability to mount and unmount a file device providing it is
995 marked as being removable and has the appropriate mount and unmount
996 commands defined in the Device resource. This fixes bug #830.
997 kes When applying a storage override, release all previous storage
998 definitions rather than just prepending the new storage.
999 This should prevent a good deal of confusion.
1001 kes Implement ./configure search for qwt libraries.
1003 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1004 Win32 FD. This should fix bug #893.
1005 kes Remove an unnecessary beep in Win32 init code.
1006 kes Update copyright dates in Win32 executable about boxes.
1007 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1008 code with a BSD getopt.c and getopt.h.
1009 kes Remove sched.h from the Win32 compat directory -- not used.
1010 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1011 need to shut it down, do it through the services panel or the command
1013 kes Remove some inappropriate Bacula FSFE copyrights.
1014 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1015 kes Fix regress config non-portable test as pointed out by
1016 Florian Heigl <florian.heigl@gmail.com>
1017 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1018 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1020 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1021 Reported by Frank Sweetser.
1025 kes Fix client-only build.
1026 kes Integrate client-only fixes for bsys (initgroups) and conio from
1027 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1028 kes Make arguments to get_scratch_volume() in same order as other
1030 kes Rework the prune_volumes() subroutine so that after purging and
1031 no volume found in desired pool, it will check for a scratch
1032 volume. This prevents recycling the whole scratch pool.
1033 kes Add code to status storage to print boffset_t (largefile support).
1035 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1036 kes You now need a --with-qwt=<dir> to be able to build bat.
1037 kes Update src/win32/cats/bacula_cats.def to include the new
1038 db_get_query_dbids() call on Win32.
1040 kes Correct a problem when selecting a scratch volume and moving
1041 it to another pool that lost some columns.
1042 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1043 kes Enhance Autochanger error messages to include Volume and device name.
1044 kes Rework prune_volumes() code to take account of InChanger flag,
1045 and to handle recycling volumes going to the Scratch pool and
1046 current pool because the RecyclePool directive.
1047 kes Implement a better and more efficient db_get_query_dbids() to
1048 handle creating and passing back a list of DBIds.
1052 kes Start work on new more efficient DBId subroutine. First use
1053 will be for recycling volume to Scratch inchanger.
1054 kes Increase number of JobIds in pruning from 1000 to 10000.
1055 This to be replaced by above routine.
1056 kes Begin implementation of building Qt4 on Win32.
1057 kes Correct typo in fix I added for bad TLS shutdown.
1058 kes Pull 2.0.3 patches into patches directory.
1059 kes Update Release notes. Include qt-console in line count.
1060 kes Update Projects file.
1062 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1063 bug in migration code where a job that spanned two volumes
1066 kes Implement new BST_DESPOOLING blocked state. Change from locking
1067 during despooling in SD to blocking. This means that other threads
1068 can work with the device structure, in particular the reservations
1069 system while despooling.
1071 kes Fix return in reservation message queue that missed clearing
1072 the jcr lock (implemented 26Jun07 below).
1073 kes Rename a number of dev methods to make locking function names
1075 kes Document locking in lock.c. Move lock structures to new file
1078 kes Move reservations message lock to lock jcr only this
1080 kes Move main SD locking code into lock.c (new file).
1081 kes Update Win32 build to include lock.c
1085 kes Dirk committed the qwt library code for drawing graphs in bat.
1086 kes Tweak install of qwt so that it is integrated with ./configure.
1088 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1089 out by Eric (my typo).
1090 ebl Fix configure.in to get batch mode enable
1091 kes Return correct string from authenticate.cpp in bat when connecting
1093 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1094 spurious line drops when using TLS.
1095 kes Do not file reparse points when restoring a file that already
1098 kes Implement Windows reparse points -- similar to directories, but
1099 we do not descend into it. This is a first cut. They seem to
1100 be backed up, but restore is not yet tested.
1101 kes Remove restore_blocking in tls code when shutting a socket to leave
1102 it in blocking mode. Hopefully this will fix the encryption bug
1103 reported by Frank Sweetser.
1104 kes When opening a file for backup, tell the OS that we are going to
1105 read it sequentially -- optimization.
1106 kes Change variable names in authenticate_director() to not conflict
1107 with member names in bat. Caused great confusion with compiler,
1110 kes Queue openssl error messages in case of comm problem.
1111 kes Do shutdown() call if socket terminated.
1112 kes Remove some duplicated code in tls.c
1113 kes Move more of the bsock member variables into private and access
1115 kes Add Frank Sweetser's tls-test to the regression suite.
1117 kes Add Swedish sv.po file
1119 kes Don't print clock skew message in FD if less than 3 seconds diff.
1120 kes Add a bit of VSS info to status client.
1121 kes Implement a first cut of Vista VSS, using Win2003 code.
1123 Release: 2.1.20 beta
1125 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1126 loaded tape but uses first drive).
1127 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1128 This was indeed a Win32 issue.
1130 kes Simplify search of autochanger for in-use Volume.
1131 kes Fix exit condition of check for in-use volume. kes Remove
1132 inappropriate my_postgresql_free_result() in db_close()
1134 kes Fix bad return in FD when encryption signature not found.
1135 Probably caused a crash.
1136 kes Inhibit missing encryption signature error messages for
1137 file types where no signature computed.
1138 kes Correct inverted check on autochanger in reservation system.
1139 kes Tweak debug code in autochanger reservation.
1141 kes Add some additional locking in the cats directory in subroutines
1142 that modify packet variables called from batch insert.
1143 kes Rework how dcrs are allocated. new_dcr() can now be called
1144 with an existing pointer, and it will simply clean it up.
1145 This allows the reservation system to test various different
1146 devices, and will permit easy device changes.
1147 kes A bunch of changes all over to handle new new_dcr() calling
1149 kes Work more on the Volume management in the SD. Remember Volumes
1150 for tape drives and for autochangers (even virtual disk changers).
1151 kes When looking at the Volume list to reserve a drive, handle
1152 autochanger names correctly by interating through the changer
1153 devices. Also call the Director to see if a Volume is suitable
1154 for the current job.
1155 kes Fix some bugs in bscan. Make sure all media records are written.
1156 Make sure that valid JobMedia records are written for disk files.
1157 Previously they were completely wrong.
1158 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1159 that the URLs don't change and so that the developers will all
1160 work off the same copy. Rebuild from scrach.
1161 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1163 Release: 2.1.18 beta
1165 kes Fix seg fault in FD from incorrect digest size.
1166 kes Fix argument to non-OpenSSL crypto.c subroutine.
1168 Release: 2.1.16 beta
1170 kes Remove a few malloc()s from the encryption code.
1171 kes Use the class calls to bsock in filed/backup.c and restore.c in
1172 place of the old bnet_xxx code.
1173 kes Implement code that does an on the fly calculation of the
1174 signing digest during restore of encrypted files. It makes
1175 a best guess at the algorithm, and if it is not correct, will
1176 then revert to the old code which reads the file after it is
1178 kes Implement at least one missing crypto stream in stream_to_ascii()
1179 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1180 #877 where a reload with bad syntax causes Dir to exit.
1182 Cut: 2.1.14 beta (not released)
1184 kes Do not free a volume on a tape drive until another volume is
1185 mounted and read, or the autochanger unloads the volume.
1186 This should help the SD re-use volumes that are already mounted,
1187 and should fix bug #886.
1188 kes Apply patch from user brettedgar that allows gnome2-console include
1189 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1190 kes Apply patch from Lucien Weller that fixes day of week calculation
1191 because of DST flag problem. Fixes bug #887.
1193 kes Move find_next_appendable_volume() to after acquiring a valid device
1194 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1196 kes Unable to reproduce bug 872. However added additional testing for
1198 kes Bug #874 resolved by documenting SQLite limitations.
1199 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1200 kes Bug #881 resolved by removing typo in mtx-changer script.
1201 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1202 approval. Added a link to the wiki on the web page, and implemented
1203 a backup from http://paramount.ind.wpi.edu
1205 kes Fix update allfrompool to pass pool name.
1207 kes Convert to pure GPL v2 license.
1208 kes Fix sscanf problems reported by Peter Buschman that caused
1209 a bus error on Solaris.
1210 kes Rework (simplify) the select prompt in bat.
1211 kes Move get_jobid_from_tid() into lib and create a
1213 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1214 should definitely fix the problem of lost error messages in the
1216 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1217 kes Eliminate tcpd.h from the project. Enclose the #include from the
1218 library with extern C ...
1219 kes Add print of signal name when a signal is trapped.
1221 Release: 2.1.12 beta
1223 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1225 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1226 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1227 makes SQLit3 run 30 times faster, though a bit less safe.
1228 kes Implement --with-batch-insert in configure and detection of thread
1229 safe libraries. It is on by default, but turned off if no thread
1230 safe library (e.g. SQLite 2) is available.
1232 kes Fix Bacula PostgreSQL buffer overruns.
1233 kes Do better checking for NULL results returned from PostgreSQL;
1234 implement retry for failed queries; clear results buffer after
1235 failed query. Hopefully this will correct the PostgreSQL failures.
1237 kes Implement algorithm to handle only one appendable volume with
1238 Prefer Mounted Volumes = no.
1239 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1240 returned from a query.
1241 kes Make volume lock recursive.
1242 kes Implement an additional volume reservation algorithm that
1243 starts by considering all reserved volumes then uses the
1244 old brute force algorithm of searching the resources to
1245 find a suitable device.
1246 kes Add new reservations debug code and refine the old code.
1247 kes Update the win32/dll/bacula.defs file.
1249 kes Tweak reservations algorithm to permit a few more cases, i.e.
1250 volume reserved, but on different drive, ...
1251 kes Enhance SD status to include Pool and Media Type for drive in a
1252 more readable format (a bit longer).
1253 kes Fix PostgreSQL double free.
1255 kes Minor refactoring of restore decryption code.
1256 kes Add code to smartall.c to detect double free of a buffer.
1258 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1259 so that bsmtp will create a correct email address (mailbox only).
1260 kes Modify 'memory' command so that the buffers are listed as 'In use'
1261 to avoid confusion with Orphaned buffers.
1262 kes I reworked the OpenSSL include/lib flags to be handled in
1263 the standard Bacula way, which should fix bug #863 concerning
1264 non-standard OpenSSL libraries.
1266 kes Implement Help Browser window for bat.
1267 kes Fix reload bug that reset StorageId to zero.
1269 kes Fix TLS #ifdefing when TLS turned off.
1270 kes Ensure that when labelling a tape with Slot=0 that InChanger
1272 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1274 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1275 add DISTINCT (required by PostgreSQL).
1276 kes Implement BSOCK authenticate_director() method. Eventually will
1277 authenicate all daemons.
1278 kes Move several more functions into the BSOCK class.
1280 kes Add code to tell the OS that we no longer need a cached
1281 file that we were reading. In findlib/bfile.c. Also,
1282 only cache files that we are reading. Thanks to
1283 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1284 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1285 kes Implement script to automatically generate cats and dll .def
1286 files for Win32 dll.
1287 kes Update README.mingw32 to include new .def file generation.
1288 kes Correct typo in UTF-8 error message as reported by:
1289 jhernandez <julianhernandez@gmail.com>
1290 kes Add additional sm_check() code on debug level 1.
1291 kes Set default debug level to 1.
1292 kes Trap SIGABRT in attempt to get traceback.
1294 kes Reduce bat connect timeout from 30 to 15 seconds.
1295 kes More restructuring and implementing BSOCK class in place of
1297 kes Remove a few unnecessary malloc() tests in crypto code.
1298 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1299 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1300 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1302 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1304 kes Fix Verify InitCatalog. The attributes were not pointing to the
1305 correct saved location.
1306 kes Implement message callback so that GUI is sure to get all
1307 daemon messages. Currently displayed in a dialog in bat.
1308 kes Ignore SIGUSR2 (Bacula timer) in bat.
1309 kes Apply regress patch from bug #859 to allow regress to work
1310 with Solaris compiler.
1312 kes Begin adding TLS support to bat.
1313 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1314 clean up lex.c and make it more readable.
1316 kes Move more bnet functions into the BSOCK class.
1317 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1318 kes Complete change of berrno strerror() method to bstrerror()
1320 Release: 2.1.10 beta
1322 kes Cleanup incorrect email addresses in bsmtp.
1323 kes Make bat display initial messages rather than discard them.
1325 kes First cut of adding .mod to the run command.
1326 kes Implement auto display of messages in bat.
1327 kes Enhanced preferences to allow all Bacula output to be
1330 kes Try to make bsmtp date routines more generic.
1331 kes Fixed bug #856 autochanger documentation.
1332 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1333 kes Add new cats entry point so Win32 builds.
1335 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1337 kes Do better checking for the MySQL 64 bit libraries looking for both
1338 .a and .so libraries.
1339 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1340 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1341 kes Require the thread safe version of MySQL during configure. Thanks
1342 to Andre Noll for pointing this out.
1343 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1344 continuing in migration code.
1345 kes Apply implementation of tray-monitor font derived from gnome-console
1346 submitted by Andreas Piesk <a.piesk@gmx.net>
1348 kes Eliminate important memory loss in SQLite
1349 kes Fixed the batch insert MySQL thread specific data that was not
1350 being freed. See cats/mysql.c:db_thread_cleanup().
1351 kes Fix restore before command.
1352 kes Convert old hdr.name to name() in a few places.
1353 kes Implement update jobid command.
1354 kes Return all time_t dates in db_get_job_record()
1355 kes Stop watchdog in SD earlier.
1356 kes Put Pool just after Storage in please mount message.
1357 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1360 kes Update the po files.
1361 kes Fix Verify InitCatalog by making it cache attributes.
1363 kes Change name bacula-bat to bat for man 1 page to correspond to
1365 kes Check for client and store NULL pointers in status command. This
1367 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1368 kes Fix sign extended editing of %p.
1369 kes Clean out a little old #ifdefing in cats/mysql.c
1371 kes If time diff between DIR and FD is more than 600 seconds convert
1372 INFO message to WARNING.
1373 kes Implement heap size display in status for all daemons.
1374 kes Attempt to fix MySQL db open memory loss (not successfull).
1375 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1376 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1377 Query. This looks like a MySQL but but by doing extra releases,
1378 the memory goes away. This should fix bug #847.
1380 kes When backup fails, cancel SD before waiting for sd termination.
1381 kes If SD is waiting for FD to connect during cancel, wake up the
1383 kes Fix fsf code so that errno is correctly reported.
1384 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1386 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1387 so that Bacula doesn't later stumble into a seg fault.
1388 kes Use the term Restore Client in the restore Job report.
1389 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1390 the original job's FileSetId.
1391 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1392 spooling in migration jobs. Not yet tested.
1393 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1394 reading conf file from a pipe. However, do it with open_bpipe()
1395 rather than popen. Not yet tested.
1397 kes Fix an ugly bug where the VolCatBytes were getting updated
1399 kes Implement bconsole memory command that prints current memory
1400 usage, plus smartalloc dump.
1401 kes Clarify some error messages in backup, admin, and migrate.
1402 kes Shrink label dialog to smaller size.
1403 kes Invert Cancel OK buttons on restore to be OK Cancel.
1404 kes More strerror() to bstrerror() conversions.
1406 kes Start implementing bstrerror() in place of strerror().
1407 kes Stripping path -- seems to work.
1409 kes Prevent door and port files from being restored (mostly
1411 kes Free an unreleased buffer in compat code.
1412 kes Change console Job name from *Console* to -Console- to eliminate
1413 Win32 filename problems. Put Win32 path separator when creating
1414 Console file. This fixes bug #846.
1415 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1417 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1419 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1420 to force Win32 error message.
1422 kes First cut strip path. The data should be passed to the FD,
1423 but nothing is done with it yet.
1424 kes Enhance the digest and signature routines in the crypto
1425 library to accept a JCR and to use it to print error messages
1426 so that they will go in the Job report rather than the daemon's
1428 kes Simplify some of the verify signature code.
1429 kes Simplify a few of the alternative returns in the signature
1432 ebl Use only POSIX regex instead of GNU regex in breg.c for
1433 File relocation. It fix broken freebsd compilation.
1434 kes Convert all other Dir files to use new ua class message
1436 kes Tentative fix for missing digest signature in bug 807.
1437 kes Correct handle problem in new win32_ftruncate routine.
1438 kes Convert ua_purge.c and ua_update.c to use new ua class
1439 message routines for bat.
1441 kes Correct incorrect installation of LICENSE in Win32 installer.
1442 kes Display LICENSE at the beginning of the Win32 install.
1443 kes Attempt to correct the need for the png files to be installed
1445 kes Reapply my bat.conf install script in qt-console. I think I
1446 editted bat.pro instead of bat.pro.in and it was lost.
1447 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1448 the /var/lock/subsys for subsysdir. Also corrects typos in the
1451 kes First cut update job.
1452 kes Correct configure to include qmake of src/qt-console directory.
1454 kes Make restore job yes/mod/no print in one command so GUI works.
1455 kes First cut implementing backup and restore client.
1456 kes Correct editing in Verify output that caused a seg fault.
1458 kes Insure that bat.conf is not overwritten during installation.
1459 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1460 while I was implementing migration in March 2006 !
1462 ebl Cleanup file relocation, using char *RegexWhere instead of
1463 char *where + bool where_use_regexp
1464 kes Update some manpages and add bat manpage.
1465 kes Make a first cut at converting bacula.spec.in for bwx-console
1467 kes Apply patch from John Goerzen to add hostname as fourth argument
1468 to make_catalog_backup script.
1469 kes Fix typos I introduced into bsmtp.c
1470 kes Make pm_strxxx() routines handle input of NULL pointer. This
1471 is to protect from NULL pointers returned from SQL databases.
1472 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1473 kes Add more debug to FIFO code -- fix fifo regression test.
1475 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1476 kes Add thread timer to bnet_connect() to break from OS if wait time
1479 kes Update Win32 build to include new files, new symbols, and
1481 kes Implement socket level heartbeat (tcp_keepidle)
1482 ebl Commit File relocation patch
1483 kes Make bat have 'make install' target.
1484 kes Warn during install if old gnome-console binary found.
1485 kes Warn during install if old wx-console binary found.
1486 kes Add -8 option to bsmtp command line to add content type utf-8.
1487 Fixes bug #809. (Character coding problem in bsmtp).
1488 kes If < is found in target (from, to, cc) then do not enclose the
1489 target in < > in bsmtp. Fixes bug #772 (malformed address).
1490 kes When printing certain items in dbcheck, stop after 300000.
1491 Fixes bug #822. (dbcheck loops).
1492 kes Incorrect status in Dir after waiting for mount with poll set.
1495 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1497 kes Print waiting to reserve a device every 5 mins.
1499 kes Don't call close_part in label.c if tape and relabel.
1500 kes Don't free volume if busy in close() -- should help with
1502 ebl Fix #824 RunScript bug (After script could be execute twice)
1503 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1504 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1505 Add a regression script to test RunScript
1507 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1510 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1511 deprecated. No additional bugs will be fixed, and they will be dropped
1512 in a future release (probably 2.4.0).
1513 kes Change name of wx-console to bwx-console to make it more Bacula
1515 kes Change the name of gnome-console to bgnome-console to make it
1518 kes Some time in March, a Feature Request with patch from Jorj Bauer
1519 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1521 The ability for the director to validate a Client (FD) CN against
1522 an arbitrary set of patterns rather than the hostname, with
1523 A new 'TLS Allowed CN' set of directives which are implemented
1524 in the Client resource. Then pattern matching is used in place
1525 of hostname matching against the Certificate's CN. As an example, we
1526 have certificates which (a) use a local CA, and (b) have a CN of the
1528 kes Add new/changed entry points to Win32 build
1529 kes Create unaccepted-projects for projects that are not accepted.
1530 kes Simplify locking in the reservations system.
1531 kes Add more debug code in reservations.
1532 kes Make sure error condition on reserving a volume is handled correctly.
1533 kes Correct handling of volume_in_use.
1534 kes Correct handling of initializing a device.
1535 kes Move handling of broadcasting releasing a device into release_device().
1536 kes Correct attaching dcr to dev so that it is only done if device
1537 is properly initiated.
1539 kes Locking debug level tweaks in SD.
1540 kes Tweak new Volume code.
1542 kes Add exec external-command [wait-seconds] to bconsole. This
1543 executes the external-command. Note! normally external-command
1544 should be enclosed in double quotes.
1545 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1546 it should normally be off in a production system.
1548 kes Implement die command for SD so that we can force it to dump.
1549 kes Implement SD lock debug code.
1550 kes Implement new algorithm for keeping Volume list in SD. It
1551 is now owned by the device.
1553 kes Implement new code for freeing in use volumes that should
1554 resolve if not all, some of the problems of multiple drive
1555 tape conflicts described in bug 801.
1557 kes Fix gui/bacula-web/images files in svn.
1558 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1560 ebl Fix a bug in batch mode (in string escape)
1561 kes Correct migration prune SQL typo that crept in in a
1562 recent 2.1.x change.
1564 kes Move bnet_despool() into class in bsock.c
1565 kes Modify job report to include director name and Build OS.
1566 kes Move drop root privilege and check_catalog() before fork.
1567 kes Add update database scripts (version 9 to 10) to updatedb directory.
1569 ebl Check size and age of each file after its backup to see if
1570 it has changed during backup, if 'checkfilechanges' is set.
1571 The FD will do an extra check (stat(2)) after
1572 each file backup. mtime, ctime and size are compared with
1573 'before backup' information. If time or size mismatch, an
1574 error message will be generated. You must upgrade FD to use it.
1576 kes Make database name and user configurable
1577 --with-db-name=xxx --with-db-user=xxx
1578 kes Add back database type to message.c for debugging.
1580 kes Implement dir_sql() which issues an SQL query.
1581 kes Modify bat medialist to use dir_sql() and do some minor C++
1582 formatting as well as eliminating a number of pointers, simplifing
1585 kes Fix some of the mtx-changer grep commands for tape label readers.
1586 kes Convert a number of bsendmsg into the appropriate send/warning/error
1587 message class calls.
1588 kes Suppress the using database message in the .sql command.
1589 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1591 kes Add context menu for floating a window.
1592 kes Some minor cleanup and name changes in qt-console
1593 kes Add doing mt setblk 0 in Win32 mtx-changer.
1594 kes Apply Martin's bug fix to move definition of ENODATA for
1596 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1597 sqlite2 and sqlite3.
1599 kes More pruning cleanup.
1600 kes Turn on wait_for_drive by default in mtx-changer.
1601 kes Turn on Batch insert code by default as it now passes regression.
1602 kes Add ./configure --enable-bat to enable building of Bat.
1603 No install yet though.
1605 kes Implement a new .sql command for bat.
1606 kes Implement code to turn off pruning in obtaining the next volume.
1607 Pruning is turned off for the status dir command, but turned on
1608 for SD requests and for the list nextvolume command.
1610 kes Correct Qmsg() that was not updated correctly when committing a
1611 previous change (probably the recent TLS patch).
1613 kes Write new subroutine is_volume_purged() that explicitly checks
1614 if the Volume is purged, and if so marks it as such. This should
1615 resolve problems reported about needing to mount twice to recycle
1617 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1618 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1619 amount of duplicated code.
1620 kes Do volume pruning only for the Media Type desired (reduces pruning time
1621 if multiple Media Types are in the same pool).
1622 kes Implement more detailed info in the Job report for the Bacula version
1624 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1626 ebl Add bbatch tool to bench database and insert mode.
1627 Fix sql quote stuff in batch mode
1628 Fix sql stuff for mysql
1630 kes Correct problems with am/pm scheduling. Fixes bug #808.
1631 kes Implement new prunning code that prunes up to 1000 jobs at
1632 the same time. The same technique can be applied to a number
1633 of other prune/purge subroutines.
1634 kes Add an insanity check when starting a new tape job to ensure
1635 that the tape position has not been changed. If so fail the
1637 kes Fix Win32 build for dlls to add the folllowing:
1638 src/lib/bsock.c -- new file with new entry points
1639 src/lib/dlist.c -- new entry points
1640 src/cats/sql_create.c -- new entry point
1641 src/cats/sql_cmds.c -- new DATA item exported
1643 ebl batch mode cleanup bscan-test is ok now.
1644 kes Implement SD code to check length of disk volume before appending.
1646 kes Correct return status on db_batch... routines.
1647 kes Add call to db_write_batch_file_records() to migration code.
1648 ebl Fix AfterJob timing
1649 kes Move the checking of the database in initializion of the Director
1650 to after we drop privileges. This avoids the need for both root
1651 and bacula access to the DB.
1652 kes Correct a misplaced variable definition in src/filed/backup.c
1653 kes Correct how the new batch insert db_create_attributes_record()
1654 uses the arguments. Caused a seg fault in bscan.
1655 kes Implement lock() and unlock() methods in DEVICE class.
1656 Implement block() and set_block(xx) methods in DEVICE class.
1657 kes Modify bnet_connect() so that it uses time() to check for the
1658 wait time expiring (on some OSes, some system calls may not
1659 return immediately).
1660 kes Modify Verify to obtain the previous JobId when it is actually
1661 running rather than at schedule time (as it was in 1.38.x).
1662 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1664 kes When checking pid in pid file, continue running if the pid is
1665 the same as ours. This occurs on IRIX after a system crash.
1668 kes Extend new GUI API.
1669 kes Make the ua structure a class, and implement send_msg(),
1670 error_msg(), warning_msg(), and info_msg().
1672 kes Apply fix from for building wx-console on the Mac from
1674 kes Implement new select mechanism for GUI programs.
1675 kes Reorganize initialization of stackedWidgets in bat.
1677 kes Add updated nagios plugin supplied by Christian Masopust.
1679 kes More bat implementation.
1680 kes File migrate bug with Pool Occupancy using mediaid instead
1681 of jobids. Fixes bug #795.
1682 kes Fix orphaned buffers in filed backup and verify due to
1683 crypto buffers not freed during errors. Fixes bug #789.
1684 kes Extend new GUI api code to tree commands.
1685 kes Ensure that tree and dot commands check console ACLs.
1686 kes Permit marking directory with trailing slash.
1687 kes Allow 20 console connections (instead of only 10).
1689 kes Add smartctl call to bacula-sd.conf as an example of getting
1692 kes Modify jobq.c to let simultaneous restore jobs run. This may
1693 cause them to fail if they cannot get a drive.
1694 kes Add Client Connect Wait to Storage daemon to permit users to
1695 modify the time the SD waits for a FD connection.
1697 kes Correct virtual changer check which was backwards. This caused
1698 volumes to be unloaded into slots already occupied.
1700 kes Apply Command ACL filter to JobId list in restore command.
1701 kes Correct typeo in var.c patch.
1703 kes Don't let Bacula prune File or Job records for the current Job.
1704 kes Fix variable substitution pad + inc bug reported (with patch)
1707 kes Correct SQLite log table index as reported by Luca Berra.
1709 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1711 kes Begin implementing new comm signals for API.
1712 kes Fix a few places in lib/message.c where the open fd may
1714 kes Continue implementing lib/bsock.c (real class). Make jcr,
1715 who, host, and port private. There are new methods to access
1716 them for non-class use. This required touching a number of files.
1718 kes Add LANG=C to autoconf/randpass so it works with languages other
1719 than English. Fixes bug #788.
1721 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1723 You will not be able to generate Include/Exclude list any more.
1724 It will be fixed soon.
1725 If you want to use this, you can apply
1726 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1728 kes Restore of sockets created false error messages because Bacula
1729 no longer restores sockets, but the code was still trying to
1730 set the attributes on a non-existent file. Reported by a user.
1731 ebl finish RecyclePool feature
1732 Media will takes Pool.RecyclePool
1733 when moving from Scratch to a Pool or when user will do
1734 update volume=xxx frompool
1735 To use it, add RecyclePool = aPool to your Pool resource
1738 RecyclePool = Scratch
1742 kes Expand new BSOCK class adding signal() and new BNET signals.
1743 kes Begin enhancing the dot commands adding a new API function
1744 that returns more information and will make it easier
1745 to interface to the Director from a program.
1747 kes Make DEVICE fd private. Its new name is m_fd, and can be
1748 obtained with dev->fd() outside the class. This is the
1749 first of many DEVICE members to be made private.
1750 kes Implement Michael Renner's idea on having a virtual disk
1751 changer. I made some minor modifications (e.g. I did not
1752 implement the Virtual Changer directive, but simply set
1753 the Changer Command to an empty string.
1755 kes Implement a BSOCK send() method that writes the whole record
1756 in a single write() request rather than in two.
1757 ebl add update volume=xxx recyclepool=yyyy
1758 volume takes recyclepool from pool when using update volume=xxx from pool
1760 kes Fix encryption deblocking bug, which caused some restored files
1761 to be truncated. This fixes bug #763.
1762 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1763 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1765 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1766 ebl Use btime_t instead of uint64_t in media patch.
1768 kes Optimize the use of the database a bit in the Status dir command.
1769 Only open it when needed, ensure that if any previous database
1770 was opened, it is closed.
1772 kes Correct VolCatBytes bug from media patch.
1773 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1774 in the case of orphaned records.
1775 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1776 and File records in 300K chunks to be more efficient. This
1777 idea came from Juan Luis Frances (if I remember right).
1778 kes Apply Eric's scratch patch that moves a purged Volume to
1779 the RecyclePool. Question: how is RecyclePool set? what
1780 happens to the ScratchPool?
1781 kes Apply Eric's media patch that collects read/write media
1782 times as well as byte counts. This patch requires a
1783 simultaneous upgrade of the DIR and SD. Note, there
1784 should be some way to turn off timing. I'm not sure
1785 times are in Bacula units.
1786 kes Apply Eric's batch-insert patch.
1788 kes Update projects list.
1790 kes Implement Include/Exclude file lists in FD as dlists using
1791 the new dlistString class. This permits efficiently having
1792 large include/exclude lists and completes project Item 25.
1793 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1794 console is authorized to cancel the job. This fixes bug
1796 kes Modify SD so that the VolCatJobs medium record is updated
1797 at the beginning of a Job rather than the end. This
1798 fixes bug #775 where exceeding MaxVolJobs caused jobs
1800 kes Added a mutex around getting and setting Volume information
1801 so that multiple simultaneous jobs will single thread.
1803 Switch to using Subversion
1804 kes Remove src/pygtk-console/ from configure
1806 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1807 plus the entrypoints.
1808 kes Apply patch supplied that corrects debug print
1809 in canceling jobs for max run time. Supplied as
1810 part of bug #621, which was previously fixed.
1812 kes Test on job_canceled() and sd_msg_thread_done inside
1813 loop starting the message thread to avoid a race condition.
1815 kes Remove rl_catch_signal from console.c as it conflicted
1816 with the header definition. Fixes bug #765.
1817 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1819 kes Clarify some stored/acquire messages to indicate if the
1820 problem is with read or append.
1822 kes Fix memory leak with storage ids in cats/sql_get.c
1823 kes Terminate watchdog earlier to avoid reference to released
1824 memory -- reported by Jason Austin.
1825 kes Move closing the database from jobq.c to the director daemon
1826 termination routine. This fixes memory leaks for shadow jobs
1827 (i.e. migration jobs).
1828 kes Free up the unique jobid chain items in migrate.c. This fixes
1829 a memory leak problem.
1830 kes Convert some ugly looking for statements to use foreach_alist
1831 in findlib/find.c. This will facilitate converting the structures
1832 to use dlist (for large include/exclude lists).
1833 kes Fix a bug in the btree.c and btree.h routines, then rename them
1834 rblist and add them to be built in src/lib. Include some new
1835 methods written by Rudolf Cejka that make the code more readable
1836 (hides some of the ugly casting).
1837 kes Add set_next() and set_prev() methods which make the code much more
1838 readable. Also add a new dlistString class that facilitates storing
1839 strings in dlists. To be used in the large include/exclude lists.
1840 kes Make some trivial modifications to lib/tree.h that use rblist
1841 rather than dlist for storing the tree links. This was suggested
1842 by Rudolf Cejka. The result of this is that the restore tree now
1843 uses red-black binary trees rather than simple linked lists. This
1844 should give rather dramatic speed improvements for directories
1845 contining large numbers of directories/files (more than 10000).
1847 kes Fix maxruntime bug #621.
1849 ebl Implement the include JobID in spool file name project.
1850 kes Reorder projects file in order determined by Jan 2007 vote.
1851 kes Implement item #12 on project list -- quick release of FD by
1853 kes Fix open of SQLite3 db where user does not have write permission
1854 so that DIR does not crash. Fixes bug #761.
1856 kes Add back missing @ in Win32 Makefile.
1857 kes Change 'Device not configured to autolabel' from INFO
1859 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1860 which should restart an indefinite # of times.
1861 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1862 other DIR specifications.
1864 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1865 Fix path quoting in SQLite scripts.
1866 Fix problems with SHGetFolderPath.
1868 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1870 kes Fix Job restart on error bug that promotes an Inc to a Full
1871 backup. This should fix bug #755.
1872 kes Add qt-console and first cut of code.
1876 kes Fix Bacula->Documentation link on Win32 to point to index.html
1877 instead of bacula.html. Fixed bug #750.
1878 kes Return JobId in db_get_job_record() when JobId==0. This should
1880 kes Do not release source pointers when restarting a failed job.
1882 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1883 This *should* fix bug #747.
1884 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1887 kes Modify USTORE constructor to set an empty store_source string,
1888 and don't copy the store_source string in a cancel. Hopefully
1889 this will fix Arno's seg fault, bug #744.
1890 kes Add back code to disable conio in configure. Fixes bug #743.
1891 kes Correct the Options scanner in the FD to correctly handle
1892 SHA1 option, which was eating the next option. Reported by
1894 kes Add code to indicate when the SD is spooling, spool wait, and
1895 despooling as requested by Alan Brown.
1897 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob