1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 ebl Modify faketape driver to avoid sparse file.
30 Release Version 2.4.0:
34 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
37 kes Add create_postgresql_database.sql to Win32 installer. Should
38 fix problem reported by Juilio Monteiro.
39 kes Get correct slot when auto unloading a device. This fixes bug
42 kes Fix multiple media restore.
43 kes Make DEVICE Slot private and access it via a method.
44 Allows better control over when it is set and cleared.
45 kes Fix possible seg fault if SQL error.
47 kes Add Martin's fixes to argument scanning for the estimate
48 command. This fixes bug #1093.
49 kes Add debug code to SD.
50 kes Fix renaming a Volume, which used the wrong Volume name.
52 kes If operator has rewind tape, print warning, release tape and
53 try once more. If tape is positioned somewhere, something went
54 wrong, so mark the tape in error and try once more. Previously
55 this error was fatal, now it produces an error message.
56 kes Ensure correct volume name displayed during restore
57 kes Ensure that Volume is mounted for restore.
59 kes Fix a few more Coverity reported problems.
61 kes Apply Allan Black's status dir job count patch.
62 ebl Add information about IMPORT/EXPORT slots in mtx-script.
63 kes Enhance a couple of SD debug messages.
64 kes Tweak unload flag setting and ensure it is set during swap.
66 ebl Fix #1091 about bad output in estimate command.
68 kes Modify autochanger locking to attempt to avoid race
70 kes Make sure device not busy before doing label command.
71 kes Display open() errors except when polling. Previously too
72 many were suppressed. This should fix bug #1070.
73 kes Fix Win32 reparse points. Bacula will not recurse into any
74 reparse point directory, including mount points, unless the
75 directory is explicitly mentioned at the top level (same as
76 with Unix). A file that is linked to another file will be
77 backed up -- much as Unix does for hardlinked files.
80 kes Remove double quotes from ChangeLog and ReleaseNotes
81 kes Remove StorageId test when pruning and recycling (Eric's changes).
82 kes Remove old form of locking when getting volumes -- causes deadlock.
83 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
84 the name unique and to eliminate compile time error.
85 kes Add accurate.o to Win32 FD Makefile
87 kes Fix cats dll build on Win32 after db_update_job_end_record
88 calling sequence change.
89 ebl Switch to tokyo dbm instead of htable in accurate code
90 ebl Include tokyo dbm to bacula source tree
92 kes Fix buffer overruns detected by Coverity.
94 kes Tweak joblog display.
96 kes Implement --without-qwt
97 kes Fix layout of restore tree dialog
98 kes Add configure bat QWT libraries, so that bat can be built
99 with or without the QWT libaries.
101 ebl Add dummy tape driver for regression tests.
102 kes Make sure we unload the right slot when swapping.
104 kes Add debug times, reduce size of two-pool-changer test
106 ebl Tweak autoconf scripts for faketape
108 kes Improve SD reserve debug code.
109 kes Testing an improvement to free up volumes no longer in use.
111 kes Rework SD acquire for read to handle autochanger Volume
113 kes Implement regression that explicitly tests swapping a Volume
114 from one drive to another.
115 kes Enhance disk-changer to detect most error conditions.
116 kes Fix SD code so that it properly swaps a Volume between drives.
117 This fixes bug #1083.
119 kes Apply libdbi patch from Joao Freitas for regress and for
120 Bacula trunk. Regress now works with libdbi. Nice.
121 kes Apply .nobackup patch from bug #1077 submitted by
123 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
124 name into jobs cloned via the run directive.
126 kes Prevent a Volume that is being swapped from being freed from
127 the volume list. This will most likely fix, at least partially,
129 kes Fix strippath so that it does not get a buffer overrun and crash FD.
130 This fixes bug #1078.
131 kes Remove 50 millisec wait in SD that broke debugger.
132 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
133 that a job may run, counted from when the job was scheduled.
134 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
135 a job may block waiting for a resource, counted from when the job starts
136 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
137 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
138 that implements multiple commands per line in the console when using
139 readline. Modify the default to use a semicolon as the command separator.
141 ebl Fix SQL query in migration code.
142 ebl Make accurate mode with hash disk pass regression tests
144 ebl Implement first cut of accurate backup with hash disk.
146 kes Force unload of volume when wrong volume mounted in SD.
148 kes Fix bat seg fault at termination.
149 kes Add Bacula generated version to bat about box.
152 kes Experiment with allowing multiple read jobs.
153 kes Move final volume swapping code to DCR method and
154 call it from acquire_for_read().
155 kes When wrong volume is mounted during read, unload_autochanger.
157 kes Integrate the libdbi changes from Joao Henrique Freitas
159 kes Stop searching for Volumes in SD askdir if DIR returns the
160 same volume name twice in a row.
161 kes Close bat console windows first to eliminate error message
164 kes Tweak the swap Volume from one drive to another code so that
165 it now seems to work.
166 kes Resolve several problems with recycling that broke the new
167 code (these problems are in 2.2.9 as well).
168 kes Remove the volume lock when calling the sysop code.
169 kes Don't mark a reserved volume with no writers as unused otherwise
172 kes Rework class structures for VOLRES, DCR, and DEVICE to make
173 the method names a bit more logical, and for more logically
174 handling the responsibilities.
176 kes Remove redundant code in terminating the scheduler that just
177 causes a seg fault in many cases.
178 kes Cleanup releasing a volume and make it a DCR method.
179 kes Improve algorithm for detecting pre-reserved volume and
182 kes Tweak volume swapping code so it works.
183 kes Correct name overloading in mount.c
184 kes Replace released flag in VOLRES with reserved and add access
185 methods for the VOLRES class.
186 kes Prevent volume from being released while being swapped.
187 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
189 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
191 kes Refactor parts of stored/mount.c
193 ebl Add sanity checks for VolWriteTime and VolReadTime
194 ebl Take care of bad clock changes while computing VolWriteTime
195 and VolReadTime. This should fix or limit #1066
196 kes Correct error string numbers in dird/catreq.c
197 kes Restructure reserving, acquiring, and mounting volumes. Calls to
198 autochanger are deferred for mount.c -- simplifes the code.
200 kes Do not prune any running job. It just fails the job.
201 kes Lock the volumes when changing dev->reserved_device and marking
202 the volume unused otherwise the device can get reserved by
203 another job before the volume is released, thus blocking it.
205 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
206 kes Fix bug #1063, reuse of freed ptr in list nextvol.
207 kes Release regex compile buffer in filed/job.c
208 kes Add proper type of const char in sql_create.c
209 kes Turn off debug in daemon termination routines
210 kes Move free_volume_list() before devices are freed in stored.c
211 kes Fix reference to uninitalized stack variables in bregex.c.
212 This should correct bug #1067.
214 kes Fix possible seg fault in SD when freeing a volume entry.
216 kes Implement unload_dev() before swap device.
217 ebl Add statistics prunning with option and menu
218 kes Separate unload_dev() from unload_other_device() in autochanger.c
220 kes Apply patch from bug #1069 that corrects spurious error messages
221 when ACLs enabled on SGI but no ACL exists.
222 ebl Fix small segfault in bacula-sd when debug level is 500
223 kes Modify run_program() and run_program_full_output() to use
224 call by reference for the results string. This corrects a long
225 standing problem where the address of the string may be changed
226 in the subroutine but not in the calling program.
228 kes Re-enable code to remember last volume mounted on a non-tape
230 kes Add patch supplied in bug #1068 that fixes a SD crash when using
231 a Virtual autochanger.
232 kes Generate correct JobMedia records during spooling/despooling when
233 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
234 <tih@hamartun.priv.no> for excellent analysis and testing.
236 kes Tweak hash algorithm for htable using Martin Simmons idea
237 for doing a circular shift.
238 kes Remember what volume is in VTLs (previously turned off for
240 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
241 pointed out some problems in creating JobMedia records during
242 spooling with concurrent jobs. Fix the problem by updating the
243 start file position before despooling and generate a jobmedia
244 record at the end of despooling.
246 kes Fix handling of JobMedia records during spooling and when a
247 Volume is changed without actually writing data to the Volume.
249 kes Rework certain SD locking based on gdb tracebacks of deadlocks
250 sent by Eric. This code now uses only the volume_lock() rather
251 than the reservations lock when at EOM and acquiring a new
253 kes Ensure only one exit point in several subroutines.
255 kes Implement bsock code to permit locking. Use the new code in Verify
256 in the FD to prevent the heartbeat thread from disrupting the Verify
257 data sent to the Dir.
258 kes Modify SD locking to eliminate locking the reservations system from
259 outside the system. Use the volume lock when getting media data
260 and reserving a new volume at end of media.
261 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
262 when SD starts are not locked into place.
264 kes Fix error compiling runscript code on 64 bit machines.
265 kes Tweak Win32 mount point code.
266 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
267 cleared giving bad file estimate).
268 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
271 kes Keep Schedule run lists in order as suggested by
274 kes Implement autostart scripts for Debian.
275 ebl Implement upgrade catalog scripts.
277 ebl Apply jobstat patch for long term statistics. Have to implement
278 purge stats command and upgrade scripts.
279 kes Fix mtx-changer.in for broken Debian mt program.
281 kes Fix large number of JobMedia records reported by Eric Bollengier.
283 kes Apply doc fix from bug #1062.
284 kes Resolve crash and improper restore wx-console Win32 restore
285 GUI. Fixes bug #1065.
286 kes Update Win32 wxWidgets to latest version.
287 kes Attempt to do correct handling of Win32 mount points. Should
289 kes Fix Win32 FD backup/restore memory leak due to improper termination
290 of BackupRead/Write. This fixes bug# 1038.
292 ebl Reduce memory usage for accurate backup, working only with ctime
293 and mtime. (not all Lstat field)
294 About 40MB for my linux system (400.000 files)
296 kes Add dcr->reserved_volume flag that allows us to release a volume
297 even if it is not vol->released. This allows maxvol2 to work when
298 Volumes expire and we are already writing to the device (i.e. a
299 volume is pulled out from under us by another job terminating after
300 we reserve the drive).
302 ebl Permit multiple command/console per runscript definition.
303 RunScript { command = /bin/true ; command = /bin/false ... }
304 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
305 (restart an application) just after the VSS snapshot on windows.
306 kes Don't zap dcr values during release_volume() as they might
307 have the next Volume to be mounted.
308 kes Fix AIX prototype.
310 kes Second cut of drive switching during backup.
313 kes Update Win32 version of wxWidgets to most recent version.
314 kes Tweak Copy job details.
315 kes Rework dir_find_next_appendable_volume to make a bit more effort
316 to find a suitable volume before giving up.
318 kes Make ask_sysop_to_create... to return if waken from wait.
319 This helps get out of blocked conditions.
320 kes Experimental implementation of switch_device in reservations.
321 kes Implement FD version to allow easier protocol changes.
322 kes Add Plugin Options string -- not yet passed to FD.
323 kes Implement PluginOptions ACL.
325 kes Attempt to correct problems with restores with autochangers and
326 use counts going negative
327 kes Rework SD status command and implement API for bat. Implements
328 header, runing waitreservation, devices, volumes, spooling,
329 and terminated status keywords.
330 .status storage=xxx <keyword>
331 kes Clarify TLS error message by adding double quotes around name.
332 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
333 kes Pass jcr to tls routines so debug messages can be handled better.
334 kes Rework jobq resource allocation code, and possibly fix a bug
335 that caused reference counts to get out of sync.
337 kes Rename fd/dir plugin to use Bacula standard underscore.
338 kes Plugin work -- bring dir up to fd level.
339 kes Start implementation of VTL code
340 kes Fix Win32 build after adding new cats subroutine.
342 kes First cut at Duplicate Job implementation.
344 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
345 kes Start PluginOptions string, and refactor a bit of ua_run.c
346 ebl Apply Allan patch that permit to reset recyclepool.
348 kes Test patch -- possible fix or improvement for bug #1053
349 kes Refactor FD and SD status commands to permit new API code in
350 SD, and to fix Win32 build.
351 kes Win32 build is now working.
353 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
354 some ideas in patch from Scott Bailey.
355 kes Begin implementation of duplicate Job control.
356 kes Fix some of Win32 build after recent additions.
357 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
358 which causes the FD to detect whether or not the OS has the
359 honor no dump bit (*BSD systems), and if so, to skip backing up
360 any file with this bit set. The feature is enabled by setting
361 'honor no dump flag = yes' in the Options section of a FileSet.
363 kes Correct po warning message with datarootdir
364 kes Implement more code in dird.c to put configuration parsing in
365 a class rather than use globals.
366 kes Restructure SD status command for implementation of bat API
369 kes Suppress incorrect 'Will not descend from x into y' messages.
370 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
371 daemon globals used by parser.
372 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
374 kes Fix free of plugin_list when none exists.
376 ebl Apply accurate project patch.
378 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
379 on non-mempool object)
380 kes First cut of converting FD .status to work with bat API.
382 .status client=XXX header
383 .status client=XXX running
384 .status client=XXX terminated
385 kes Implement first cut of Copy Job.
386 kes Implement Catalog in Pool resource. It overrides catalog specified
387 in the Client resource.
389 kes Apply patch (with some difficulties) from Joao Henrique Freitas
390 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
392 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
393 ftruncate() actually works. In the case of some (cheap) NAS devices,
394 it does not, and so recycling NAS Volumes does not work. The code
395 simply unlink()s the file, then recreates it. This fixes bug #1011.
397 kes First incomplete cut of big malloc blocks for htable.
398 kes Tweak plugin code.
400 kes Plugin debug code + tweak a couple bat dialog layouts
402 kes Fix creating first JobMedia record during Migration to include
403 proper index. This caused slow restores of migrated jobs.
404 kes Temp fix to plugin name file_index.
405 kes Bacula backed up and restored a MySQL database.
407 kes Implement plugin restore.
408 kes Implement parsing of db_driver to give db_type index.
410 kes First cut of plugin restore code.
411 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
412 and do not strip paths on symbolic links.
413 kes Set catalog backup database and user name from values specified on
414 the ./configure line.
415 ebl Fix #1031 about wrong pool source information in job report.
418 kes Remove a redundant jcr argument to find_files, match_files, and
420 kes Implement '.status dir header|scheduled|running|terminated' that
421 prints the requested status section. With the exception of the
422 header, the other reports have fields separated by tabs (\t).
424 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
425 a resource embedded run command to find a since time if no explicit
426 since time was supplied on the command line.
427 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
428 that updates the state file at job termination time in addition to
429 when the daemon terminates.
431 kes First version where a plugin did a backup.
432 bpipe-fd.so created a backup file, wrote a test
433 string to it, and Bacua could restore this fabricated file.
435 kes Implement DB Driver = string for the DBI driver.
436 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
437 kes First cut of code for loading Win32 plugin dlls. Implement
438 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
439 and implement a dlfcn.h file based on opengroup's definitions of
442 kes First cut plugin directives.
444 kes Apply patch from bug #1049 to prevent stripping the path on a
446 kes Attempt to fix bug #1047 where stripping a path corrupts the
447 heap. Waiting for feedback.
448 kes Correct the Mount message not to suggest labeling a new tape
449 when doing a restore. Submitted by email by John Stoffel.
450 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
451 FD by using casting. Reported in bug #1042.
453 kes A bit of crypto cleanup. More later.
455 Release Version 2.2.8
457 kes Apply patch from Martin to correct bug #1040, bscan sets existing
459 kes Fixed important spelling error in doc -- bug #1045.
461 ebl Fix bextract to be able to extract non-portable Win32 data to
463 kes Move initialization of read/write res lock earlier in the code.
464 This fixes the crash with a null conf file. This fixes bug
466 kes Redefine CURES in lib/parse_conf to be URES and move it all
467 into lib/parse_conf.c -- this responds to bug #1042, but does
468 not fix it. The fix is not to compile with FORTIFY_SOURCE.
469 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
470 the trunk SVN. I don't think this was reported as a bug.
472 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
474 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
476 kes Add DataDespooling and DataCommitting status (committing is
477 the last despooling).
478 kes Finish implementation of new reservations code noted below.
480 kes Fix bsnprintf for float point numbers. I broke recently when
481 parameterizing some variables. This fixes bug #1036.
482 kes Undo recent reservations changes ... will apply them later
483 when they work better.
485 ebl Fixes #1034 which cause mysql to hang the connection after 8h
486 ebl Change default statistics target of filename.name and path.path
487 fields for PostgreSQL. This speeds lookup by indexes. Thanks
489 kes A few more tweaks to new reservation code. Make sure to clear
490 vol released flag when retaking volume. When reading label and
491 label is bad mark volume unused. When recycling, mark volume
492 unused so it can be renamed.
494 kes Fix reserve_volume() so it doesn't release a volume in use
495 (i.e. a volume entry not marked released). This should be
496 the last part needed to fix bug #1018.
498 kes Move Heartbeat documentation from Job to Director resource.
499 This fixes bug #1033.
501 kes Fix existing switch drive SD code to call autochanger to release
502 any old volume. This must be done to keep the autochanger from
503 releasing subsequently newly reserved volumes in doing a close().
504 This should fix bug #1018.
505 kes Fail if attempting to get console input in batch mode. This
506 should help fail RunScript console commands that are incomplete.
507 kes First cut implementing switch_drive() in SD (not actually called).
509 kes Implement first cut running console commands in a RunScript.
511 ebl Fixes bug #1028 where 'Selection Type' option was not usable
513 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
516 Release Version 2.2.7
518 kes Add new free_tls() entry point so that Win32 builds.
519 kes Fix compile warning in src/lib/util.c
520 kes Fix entry point for edit_job_codes() so that Win32 builds.
521 kes Fix seg fault Frank Sweetser reports in regression testing
522 on his systems. The problem was that the original author of
523 bsnprintf.c did not take into account the side effects of
524 using ++x in the argument to a #define.
525 kes Make SD protocol backward compatible with version 2.2.x.
527 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
528 because Bacula no longer restores sockets.
529 ebl Always use ignorecase fileset option on win32 FD.
531 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
532 that implements double quoting include names in conf files,
533 and also allows piping input by having the first character
534 be a vertical bar (|).
535 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
536 that implement %f in RunScripts to pass the FileSet name.
537 kes Skip leading | when lex input comes from a pipe as suggested
538 by Michael Stapelberg <michael@stapelberg.de>.
540 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
541 Nerijus Baliunas <nerijus@users.sourceforge.net>
543 kes Implement Plugin Directory and plugin events.
545 kes Implement a security enhancement: TLS authentication but no
546 encryption. Enabled by setting 'TLS Authentication = yes'.
547 Note when this is on, TLS encryption is turned OFF!
549 kes This patch corrects a problem where the maximum concurrent storage
550 jobs counter gets out of sync during restore jobs causing jobs to
551 'wait on max Storage jobs'. This patch fixes bug #1009.
553 kes This patch fixes bcopy so that it produces correct Volumes.
555 kes This patch eliminates spurious output to the console during a VerifyVolume
556 job that contains encrypted data. It fixes bug #1024.
558 kes This patch prevents the 'status dir' command from trying to use a scratch
559 volume and possibly moving it from one pool to another. This patch fixes
562 kes Add new include to postgresql.c suggested by Marc Cousins so
563 that it compiles correctly with pgre version 8.3.
565 kes Fix --archivedir addition to configure. Replace it with
566 --with-archivedir in configure.in This fixes the regression
568 kes This patch fixes bug #1012 where the job is canceled because
569 of Max Run Time exceeded when the job has not yet started.
571 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
572 one 'part' to write. Instead of each part being stored on disk,
573 written to DVD, then deleted from disk, all parts are written to disk,
574 and only the last is written and deleted from disk.
575 kes This patch fixes the status command to include the formating string for
576 JS_AttrInsterting. It fixes bug #1021.
577 kes This patch should fix the Mac OS X build problem on the latest
578 Darwin, where sys/types.h was not included correctly (apparently
579 due to a change in the Mac headers). The solution was to explicitly
580 ensure that it is defined for the ./configure.
581 This patch also has a rebuild of configure that includes the Debian
582 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
583 kes This patch should ensure that queued messages to the console are
584 displayed as soon as possible. It should fix bug 1007, but has been
585 reported not to work.
587 kes This patch fixes the infinite loop when trying to increase the
588 maximum number of volumes in a Pool during the add command.
589 This patch fixes bug #1008.
591 Release Version 2.2.6
593 db Remove extra data on estimate command in joblist for bat.
595 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
596 really change anything, but is the beginning of doing it *right*.
597 To do it completely right the LastWritten date must be passed to
598 the SD, but it is not yet done.
599 kes Minor tweaks to some bat restore SQL.
600 kes This patch fixes bug #1003 where putting the message output from
601 a Verify job into the catalog results in a recursive loop. The problem
602 seems to show up only with postgresql (to be verified).
603 kes Correct %x to %p in postgresql debug statement.
605 kes Fix bug #942 where lots of emails where generated when the heartbeat
606 interval was low and Bacula wanted a different tape from the one in
609 ebl Add new SD despooling attributes and Dir inserting attributes
610 job status codes in the catalog (Status table).
612 ebl Use qmake-qt4 instead of qmake when available (debian system).
614 kes Add a security warning to src/cats/make_catalog_backup.in indicating
615 that passing the password via the command line (arg 3) is insecure.
616 This responds to bug #990 (it doesn't fix it).
618 kes Set default debug_level to zero. This corrects bugs #991 and #993.
619 kes Fix a crash in bat when it cannot connect to the Director for example
620 if the Director is not running.
621 kes Remove redundant INDEX (JobId) from File table in the trunk.
623 kes Make explicit exception to GPL in LICENSE to permit linking
624 the Win32 FD with Microsoft VSS code.
625 kes Apply the Solaris package patch from
626 Masopust, Christian <christian.masopust@siemens.com>
627 kes Apply the patch to optionally add a timestamp in the debug output
628 submitted by Mariusz Czulada <manieq@wp.eu>.
630 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
631 backend (sql_strerror). Fixes bug #989
633 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
634 It applied with no problems.
635 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
637 kes Redirect stderror to stdin on mt status command in mtx-changer.in
638 since the status is returned on stderr on Solaris.
639 kes Activate Close button on tray-monitor window. This fixes
641 kes Check for NULL item in parse_conf.c before calling it. In the
642 case of Device, there is no item and this caused a seg fault when
643 Device appears in the conf file.
644 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
645 avoids pulling in config.h multiple times in some new code.
647 kes Fix spurious warning message printed when creating a volume with
648 a LabelFormat. This fixes bug #976.
650 Release Version 2.2.5
652 kes Add JobId in place of Job name in all the Jmsg() output.
653 kes Correct the APP_DESC for the Win32 storage service (remove an e).
655 kes Make maxvol-test and new more strict maxvol2-test work.
656 kes Print JobId in all Jmsg() job output.
658 kes Add new SD despooling attributes and Dir inserting attributes
659 job status codes. This fixes bug 961.
660 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
662 kes Fix doc issue. This fixes bug #963.
663 kes Fix listing performance problems in bat. Pointed out by
665 kes Remove old debug code.
666 kes Fix bat code that tests for Win32. This should fix bug #968
667 kes Query 5 list wrong Vol after migration. This fixes bug #960
669 ebl Fix #969 where user can't change Replace option in restore menu.
671 kes Save jcr in thread specific data (tsd) for each thread.
672 kes Make Dmsg() print JobId as -%u.
673 kes Make Jmsg, Emsg, and others automatically pickup the jobid
674 for the thread if it exists.
675 kes Remove old reservation debug jid code.
676 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
677 ebl Add an option that permit to specify spool size in job
678 definition. (Applying patches/testing/spoolsize_per_job.patch).
679 You must upgrade SD and DIR at the same time.
680 dvl Add new configuration item --archivedir
681 dvl Adjust regression tests to use tmp not /tmp. This will allow
682 multiple concurrent runs of the regression tests.
684 kes Fix race condition that drops final block written to volume.
685 This happens in rare cases with multiple simultaneous jobs
686 when the Volume fills. This fixes bug #964. May be related
687 to bug #935 and possibly #903.
688 kes Eliminate more strerror() and replace with bstrerror().
689 kes Remove BSD getopt and replace with unrestricted IBM version.
690 kes Fix Win32 build for changed calling sequences.
691 kes More tweaks to the mount volume routines to get everything
692 right. Changed variable name from find to have_vol, which is
693 much easier to understand.
694 kes Enhance btimer debug code.
696 kes Fix FD->SD authorization failure, which was due to spurious
697 wakeups from a pthread_cond_timedwait(). Simply check the
698 predicate before continuing. This fixes bug #953.
699 kes Add const char where needed (more to do). Remove temp debug code.
701 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
702 kes Don't overwrite error message in check_tables_version.
704 kes Unlock batch insert tables with same calls used elsewhere.
705 kes Allow starting 59 jobs a second.
706 kes Make SD session key more random.
707 kes Add retry for SQLite opening db if it fails. Probably helps
709 kes Suppress extra error messages during batch insert failure.
711 kes Add jcr to timer packets so if killed message can be sent to job.
712 kes Add JobId to all Dmsg() output.
713 kes Put some FD auth code on dbglvl rather than fixed.
714 kes Return insert attributes error message in db msg buffer to avoid
715 false error messages. Helps fix bug #966.
716 kes Separate batch init error messages. Probably helps fix bug #966.
717 kes Make SD code that contructs attribute insert check string lengths
719 kes If Dir gets an error during inserting attributes, cancel SD.
720 This reduces unnecessary error messages.
722 kes Correct search boolean for getting Volume info
723 ebl Cleanup batch insert code. Probably fixes bug #965.
724 kes Back out one small change to the reservation system (reserving a volume).
725 kes Rework how a Volume is mounted. It is now much more intelligent and
726 will always attempt to use any mounted volume if possible and reduces
727 calls to the Director asking about volumes.
729 kes Turn off some code when batch insert not enabled.
730 kes Edit FD name in connect error messages.
731 kes Rework the reservation system to take into account that the Director
732 might give us a Volume that is different from the current one being
733 used, and to ensure that we don't exceed Maximum Volume Jobs.
734 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
735 fatal error with multiple jobs running'
736 kes Add more debug code in reservation system.
737 kes Implement maxvol-test to check bug #947.
739 kes Add code to handle tray monitor separated from Win32 FD.
740 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
742 kes Add missed return in fixing verify bug -- trunk only.
743 ebl Fix a command parser issue causing a director segfault.
744 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
746 kes Increase the max block size to 4MB fixes bug #957.
747 kes ERABT if user sets min block size > max block size. Fixes bug #956.
748 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
749 is not properly mounted (recognized) during a poll.
750 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
751 Job that has differences reports Verify OK.
752 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
754 ebl Add an option to operate on all pools with update vol parameters.
755 This complete the project 20. Patch from Nigel Stepp.
756 ebl Add history support to bconsole when using readline.
757 Using Ctrl-D to exit doesn't update .bconsole_history
758 kes Modify new volume algorithm to use max MediaId for generating next
759 volume number rather than the count of Volumes. This should essentially
760 eliminate the failure rate if some volumes were deleted. Bug #921.
761 kes Begin implemention of Optimize Job Scheduling.
762 kes Implement restore callback that Dirk and I agreed on for bat
763 restore. This fixes bug #928. Restore of backup of zero files fails.
764 kes Fix SQL Catalog logging which broke with new db_escape_string
767 Release Version 2.2.4
769 kes Fix bacula_cats.def for new db_escape_string().
770 kes Increase size of name string when FD making connection to SD.
771 May fix bug #953. FD->SD connection failure.
773 kes Add code to help Dan debug 2drive-incremental-2disk test.
774 kes Add code to try to fix bug #908.
775 kes Add waits to multiple exit detection code to try to force pid
776 file to always be deleted.
777 kes Restore good dev.tar.gz to rescue set appropriate binary property.
779 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
780 trying to switch drives by checking for blocking before unblocking.
782 kes Cancel storage daemon in all cases where FD reports error. This
783 should fix virtually all cases of bug #920.
784 kes Fix db_escape_string() for MySQL which did not compile.
786 kes Fix error message that was clobbered when Dir tells SD it does not
787 have write permission on Volume. This should fix a minor point
788 in bug #942, but not the main problem.
789 kes Add code to cancel job in SD if FD connection fails. This should
791 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
792 dvl Pass jcr and db into db_escape_string() to enable better escaping
794 kes Fix migration code to get correct Volume name with multiple volumes
795 by skipping |. Fixes bug #936.
796 kes Implement patch supplied by Landon to fix bug #944 where using
797 TLS with bconsole uses 99+% of the CPU.
798 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
800 kes Move patches into patches directory.
802 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
805 ebl Using 'm' in bconsole will show messages like before,
806 and not memory usage.
807 kes Fix bug #935, and probably also bug #903 where files were not
808 restored. MediaId was not properly set in JobMedia record after
811 kes Suppress chown and chmod error messages if the FD is not running
814 kes Apply Martin Simmons' patch that should turn off the new API usage
815 when batch insert is turned off allowing building on older
817 kes Add ./configure search in qwt-qt4 for qwt package
819 kes Bacula is now free of 3rd party GPL copyrighted code!
821 kes Add guid_to_name.c/h which replace idcache.
822 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
824 ebl Detect if new PosgreSQL batch insert API is present.
825 kes Correct incorrect mempool call causing Director crash. Occurs on
826 systems without va_copy().
827 sb Update spec files for 2.2.1 release
829 kes Fix memory pool call in ua_output.c. bug #934.
830 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
831 Add test program to fnmatch.c
833 kes Integrate patch to README.vc8 from
834 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
835 edit it to get it into Unix patch format.
836 kes Implement mkpath.c to replace old FSF makepath.c
838 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
840 Release Version 2.2.1
842 kes Update POTFILES.in
843 kes Cleanup a few underquoted AC_DEFUNs in configure
844 kes Apply patch from Martin Simmons that adds a test for va_copy to
847 kes Fix bug #921 by increasing the number of tries to create a new volume
849 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
850 can be called multiple times. Implement a version for machines
851 without va_copy() that gets a big buffer.
853 kes Integrate more portable zone offset code into bsmtp.c
854 Submitted by Attila Fülöp.
856 kes Fix bad SD->FD return status reported by
857 (James Harper) <james.harper@bendigoit.com.au>
858 ebl Fix a bug in read_close_session which return random status
859 thanks to James Harper
861 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
862 and directory names during restore of single file/directories.
863 kes Add sanity checks to .sql command when string is empty. Hopefully
864 that will resolve Dirks Director crash.
866 kes Apply patch submitted by Martin Simmons that corrects a seg fault
867 in the bsmtp chat subroutine when debug is >= 10.
869 kes Fix Director crash when running bat SQL queries.
870 kes Add David's notes on Item 8: Copy pools.
872 kes Rework projects file to be current and ready for a vote.
873 kes Enhance lex scanner error message.
875 kes Tweak LICENSE file to mention BSD code.
876 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
877 if specified on the ./configure.
878 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
879 This class is intended to allow us to open a second bsock to the
880 Director while in the restore subdialog.
882 kes Fix configure to create bat Makefile before creating dependencies.
883 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
884 kes Add a tooltip to the tray monitor.
885 dvl Set the Director's PID file before dropping privs. This fixes
888 kes Update AUTHORs file
889 kes Increase the default max concurrent jobs to 20 in FD and SD to
890 correspond with the default .conf files.
891 kes Rewrite the Win32 service routines. This eliminates the 3 copies
892 some different, of the same file created by RN when porting the
894 kes Rearrange some of the Win32 directories and the placement of the files
896 kes Set DEVELOPER flag in version.h
898 ========================================================================
899 Release Version 2.2.0
901 kes Apply a second doc patch from Marc.
902 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
903 improves the tips section that discusses how to setup multiple
906 kes Update bat README file.
907 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
908 corrects a typo in the Recycle status check in db_find_next_volume().
909 This will probably fix a number of annoying problems with multiple
911 kes Modify most of dird/msgchan.c to use bsock class calls rather than
912 bnet calls -- no functionality change.
914 kes Modify the Verify output to specify if files are missing on
915 the Volume(s) or disk. Fixes confusion in bug #916.
916 kes When more than one Volume is read in a migration job, the last
917 Volume bytes reported are from the last read volume rather than
918 the last written volume. Fixed. This fixes bug #910.
919 kes Fix display of Recycle flag after update volume=foo recycle=yes.
920 It previously printed New Recyle flag is: no. This fixes bug
923 kes Correct seg fault when switching tape drives during restore.
924 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
925 be used until after 2.2.0 release.
927 kes Remove fnmatch() in SD that permitted wild card specifications.
930 kes Fix %g in filename returned by SQL for browse tree reported by
932 kes Fix configure so that it puts config.out in the cwd rather than
934 kes Attempt to fix the locking problem reported by Eric in bug #906.
935 kes Make berrno class to leave errno unchanged after constructor call.
936 kes Make bnet_server use the heap rather than the stack to allocate
937 its socket fd pointers to avoid a crash at termination. Problem
938 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
940 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
941 and putting it in depkgs-qt along with Qt4.3.
943 kes Rework code in acquire.c that switches drives for reading when
944 the Media Type does not match. This should fix bug #906
946 ebl Fix a director segfault during job setup #907
947 kes Correct seg fault in postgresql when first operation returns no
948 rows. Fixes Dirks File browser problem seg fault with bat.
950 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
951 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
954 kes Implement PopUp YES/NO dialog for bat.
956 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
958 kes Correct RunScript to terminate job in FD on failure.
959 kes Change abort_on_error and AbortJobOnError to fail_on_error
960 and FailJobOnError in RunScripts.
961 kes Minor tweaks of code formating in RunScripts, principally to
962 avoid depassing 80 columns.
964 kes Eliminate one #ifdef Win32 in bsmtp
965 kes Implement grow tool to grow a file for testing very large databases.
966 kes Add big-vol-test to test Bacula seeking with > 5GB.
969 kes Modify find_next_volume() to return all values in Media record.
970 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
974 kes Update Release notes
976 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
977 Warning, in previous beta version, all media get from scratch keep their
980 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
981 This should fix bug #842. Made a note to look at removing the temp
982 files at the end of the install.
983 kes Add ability to mount and unmount a file device providing it is
984 marked as being removable and has the appropriate mount and unmount
985 commands defined in the Device resource. This fixes bug #830.
986 kes When applying a storage override, release all previous storage
987 definitions rather than just prepending the new storage.
988 This should prevent a good deal of confusion.
990 kes Implement ./configure search for qwt libraries.
992 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
993 Win32 FD. This should fix bug #893.
994 kes Remove an unnecessary beep in Win32 init code.
995 kes Update copyright dates in Win32 executable about boxes.
996 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
997 code with a BSD getopt.c and getopt.h.
998 kes Remove sched.h from the Win32 compat directory -- not used.
999 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1000 need to shut it down, do it through the services panel or the command
1002 kes Remove some inappropriate Bacula FSFE copyrights.
1003 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1004 kes Fix regress config non-portable test as pointed out by
1005 Florian Heigl <florian.heigl@gmail.com>
1006 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1007 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1009 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1010 Reported by Frank Sweetser.
1014 kes Fix client-only build.
1015 kes Integrate client-only fixes for bsys (initgroups) and conio from
1016 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1017 kes Make arguments to get_scratch_volume() in same order as other
1019 kes Rework the prune_volumes() subroutine so that after purging and
1020 no volume found in desired pool, it will check for a scratch
1021 volume. This prevents recycling the whole scratch pool.
1022 kes Add code to status storage to print boffset_t (largefile support).
1024 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1025 kes You now need a --with-qwt=<dir> to be able to build bat.
1026 kes Update src/win32/cats/bacula_cats.def to include the new
1027 db_get_query_dbids() call on Win32.
1029 kes Correct a problem when selecting a scratch volume and moving
1030 it to another pool that lost some columns.
1031 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1032 kes Enhance Autochanger error messages to include Volume and device name.
1033 kes Rework prune_volumes() code to take account of InChanger flag,
1034 and to handle recycling volumes going to the Scratch pool and
1035 current pool because the RecyclePool directive.
1036 kes Implement a better and more efficient db_get_query_dbids() to
1037 handle creating and passing back a list of DBIds.
1041 kes Start work on new more efficient DBId subroutine. First use
1042 will be for recycling volume to Scratch inchanger.
1043 kes Increase number of JobIds in pruning from 1000 to 10000.
1044 This to be replaced by above routine.
1045 kes Begin implementation of building Qt4 on Win32.
1046 kes Correct typo in fix I added for bad TLS shutdown.
1047 kes Pull 2.0.3 patches into patches directory.
1048 kes Update Release notes. Include qt-console in line count.
1049 kes Update Projects file.
1051 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1052 bug in migration code where a job that spanned two volumes
1055 kes Implement new BST_DESPOOLING blocked state. Change from locking
1056 during despooling in SD to blocking. This means that other threads
1057 can work with the device structure, in particular the reservations
1058 system while despooling.
1060 kes Fix return in reservation message queue that missed clearing
1061 the jcr lock (implemented 26Jun07 below).
1062 kes Rename a number of dev methods to make locking function names
1064 kes Document locking in lock.c. Move lock structures to new file
1067 kes Move reservations message lock to lock jcr only this
1069 kes Move main SD locking code into lock.c (new file).
1070 kes Update Win32 build to include lock.c
1074 kes Dirk committed the qwt library code for drawing graphs in bat.
1075 kes Tweak install of qwt so that it is integrated with ./configure.
1077 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1078 out by Eric (my typo).
1079 ebl Fix configure.in to get batch mode enable
1080 kes Return correct string from authenticate.cpp in bat when connecting
1082 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1083 spurious line drops when using TLS.
1084 kes Do not file reparse points when restoring a file that already
1087 kes Implement Windows reparse points -- similar to directories, but
1088 we do not descend into it. This is a first cut. They seem to
1089 be backed up, but restore is not yet tested.
1090 kes Remove restore_blocking in tls code when shutting a socket to leave
1091 it in blocking mode. Hopefully this will fix the encryption bug
1092 reported by Frank Sweetser.
1093 kes When opening a file for backup, tell the OS that we are going to
1094 read it sequentially -- optimization.
1095 kes Change variable names in authenticate_director() to not conflict
1096 with member names in bat. Caused great confusion with compiler,
1099 kes Queue openssl error messages in case of comm problem.
1100 kes Do shutdown() call if socket terminated.
1101 kes Remove some duplicated code in tls.c
1102 kes Move more of the bsock member variables into private and access
1104 kes Add Frank Sweetser's tls-test to the regression suite.
1106 kes Add Swedish sv.po file
1108 kes Don't print clock skew message in FD if less than 3 seconds diff.
1109 kes Add a bit of VSS info to status client.
1110 kes Implement a first cut of Vista VSS, using Win2003 code.
1112 Release: 2.1.20 beta
1114 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1115 loaded tape but uses first drive).
1116 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1117 This was indeed a Win32 issue.
1119 kes Simplify search of autochanger for in-use Volume.
1120 kes Fix exit condition of check for in-use volume. kes Remove
1121 inappropriate my_postgresql_free_result() in db_close()
1123 kes Fix bad return in FD when encryption signature not found.
1124 Probably caused a crash.
1125 kes Inhibit missing encryption signature error messages for
1126 file types where no signature computed.
1127 kes Correct inverted check on autochanger in reservation system.
1128 kes Tweak debug code in autochanger reservation.
1130 kes Add some additional locking in the cats directory in subroutines
1131 that modify packet variables called from batch insert.
1132 kes Rework how dcrs are allocated. new_dcr() can now be called
1133 with an existing pointer, and it will simply clean it up.
1134 This allows the reservation system to test various different
1135 devices, and will permit easy device changes.
1136 kes A bunch of changes all over to handle new new_dcr() calling
1138 kes Work more on the Volume management in the SD. Remember Volumes
1139 for tape drives and for autochangers (even virtual disk changers).
1140 kes When looking at the Volume list to reserve a drive, handle
1141 autochanger names correctly by interating through the changer
1142 devices. Also call the Director to see if a Volume is suitable
1143 for the current job.
1144 kes Fix some bugs in bscan. Make sure all media records are written.
1145 Make sure that valid JobMedia records are written for disk files.
1146 Previously they were completely wrong.
1147 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1148 that the URLs don't change and so that the developers will all
1149 work off the same copy. Rebuild from scrach.
1150 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1152 Release: 2.1.18 beta
1154 kes Fix seg fault in FD from incorrect digest size.
1155 kes Fix argument to non-OpenSSL crypto.c subroutine.
1157 Release: 2.1.16 beta
1159 kes Remove a few malloc()s from the encryption code.
1160 kes Use the class calls to bsock in filed/backup.c and restore.c in
1161 place of the old bnet_xxx code.
1162 kes Implement code that does an on the fly calculation of the
1163 signing digest during restore of encrypted files. It makes
1164 a best guess at the algorithm, and if it is not correct, will
1165 then revert to the old code which reads the file after it is
1167 kes Implement at least one missing crypto stream in stream_to_ascii()
1168 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1169 #877 where a reload with bad syntax causes Dir to exit.
1171 Cut: 2.1.14 beta (not released)
1173 kes Do not free a volume on a tape drive until another volume is
1174 mounted and read, or the autochanger unloads the volume.
1175 This should help the SD re-use volumes that are already mounted,
1176 and should fix bug #886.
1177 kes Apply patch from user brettedgar that allows gnome2-console include
1178 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1179 kes Apply patch from Lucien Weller that fixes day of week calculation
1180 because of DST flag problem. Fixes bug #887.
1182 kes Move find_next_appendable_volume() to after acquiring a valid device
1183 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1185 kes Unable to reproduce bug 872. However added additional testing for
1187 kes Bug #874 resolved by documenting SQLite limitations.
1188 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1189 kes Bug #881 resolved by removing typo in mtx-changer script.
1190 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1191 approval. Added a link to the wiki on the web page, and implemented
1192 a backup from http://paramount.ind.wpi.edu
1194 kes Fix update allfrompool to pass pool name.
1196 kes Convert to pure GPL v2 license.
1197 kes Fix sscanf problems reported by Peter Buschman that caused
1198 a bus error on Solaris.
1199 kes Rework (simplify) the select prompt in bat.
1200 kes Move get_jobid_from_tid() into lib and create a
1202 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1203 should definitely fix the problem of lost error messages in the
1205 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1206 kes Eliminate tcpd.h from the project. Enclose the #include from the
1207 library with extern C ...
1208 kes Add print of signal name when a signal is trapped.
1210 Release: 2.1.12 beta
1212 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1214 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1215 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1216 makes SQLit3 run 30 times faster, though a bit less safe.
1217 kes Implement --with-batch-insert in configure and detection of thread
1218 safe libraries. It is on by default, but turned off if no thread
1219 safe library (e.g. SQLite 2) is available.
1221 kes Fix Bacula PostgreSQL buffer overruns.
1222 kes Do better checking for NULL results returned from PostgreSQL;
1223 implement retry for failed queries; clear results buffer after
1224 failed query. Hopefully this will correct the PostgreSQL failures.
1226 kes Implement algorithm to handle only one appendable volume with
1227 Prefer Mounted Volumes = no.
1228 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1229 returned from a query.
1230 kes Make volume lock recursive.
1231 kes Implement an additional volume reservation algorithm that
1232 starts by considering all reserved volumes then uses the
1233 old brute force algorithm of searching the resources to
1234 find a suitable device.
1235 kes Add new reservations debug code and refine the old code.
1236 kes Update the win32/dll/bacula.defs file.
1238 kes Tweak reservations algorithm to permit a few more cases, i.e.
1239 volume reserved, but on different drive, ...
1240 kes Enhance SD status to include Pool and Media Type for drive in a
1241 more readable format (a bit longer).
1242 kes Fix PostgreSQL double free.
1244 kes Minor refactoring of restore decryption code.
1245 kes Add code to smartall.c to detect double free of a buffer.
1247 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1248 so that bsmtp will create a correct email address (mailbox only).
1249 kes Modify 'memory' command so that the buffers are listed as 'In use'
1250 to avoid confusion with Orphaned buffers.
1251 kes I reworked the OpenSSL include/lib flags to be handled in
1252 the standard Bacula way, which should fix bug #863 concerning
1253 non-standard OpenSSL libraries.
1255 kes Implement Help Browser window for bat.
1256 kes Fix reload bug that reset StorageId to zero.
1258 kes Fix TLS #ifdefing when TLS turned off.
1259 kes Ensure that when labelling a tape with Slot=0 that InChanger
1261 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1263 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1264 add DISTINCT (required by PostgreSQL).
1265 kes Implement BSOCK authenticate_director() method. Eventually will
1266 authenicate all daemons.
1267 kes Move several more functions into the BSOCK class.
1269 kes Add code to tell the OS that we no longer need a cached
1270 file that we were reading. In findlib/bfile.c. Also,
1271 only cache files that we are reading. Thanks to
1272 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1273 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1274 kes Implement script to automatically generate cats and dll .def
1275 files for Win32 dll.
1276 kes Update README.mingw32 to include new .def file generation.
1277 kes Correct typo in UTF-8 error message as reported by:
1278 jhernandez <julianhernandez@gmail.com>
1279 kes Add additional sm_check() code on debug level 1.
1280 kes Set default debug level to 1.
1281 kes Trap SIGABRT in attempt to get traceback.
1283 kes Reduce bat connect timeout from 30 to 15 seconds.
1284 kes More restructuring and implementing BSOCK class in place of
1286 kes Remove a few unnecessary malloc() tests in crypto code.
1287 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1288 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1289 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1291 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1293 kes Fix Verify InitCatalog. The attributes were not pointing to the
1294 correct saved location.
1295 kes Implement message callback so that GUI is sure to get all
1296 daemon messages. Currently displayed in a dialog in bat.
1297 kes Ignore SIGUSR2 (Bacula timer) in bat.
1298 kes Apply regress patch from bug #859 to allow regress to work
1299 with Solaris compiler.
1301 kes Begin adding TLS support to bat.
1302 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1303 clean up lex.c and make it more readable.
1305 kes Move more bnet functions into the BSOCK class.
1306 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1307 kes Complete change of berrno strerror() method to bstrerror()
1309 Release: 2.1.10 beta
1311 kes Cleanup incorrect email addresses in bsmtp.
1312 kes Make bat display initial messages rather than discard them.
1314 kes First cut of adding .mod to the run command.
1315 kes Implement auto display of messages in bat.
1316 kes Enhanced preferences to allow all Bacula output to be
1319 kes Try to make bsmtp date routines more generic.
1320 kes Fixed bug #856 autochanger documentation.
1321 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1322 kes Add new cats entry point so Win32 builds.
1324 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1326 kes Do better checking for the MySQL 64 bit libraries looking for both
1327 .a and .so libraries.
1328 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1329 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1330 kes Require the thread safe version of MySQL during configure. Thanks
1331 to Andre Noll for pointing this out.
1332 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1333 continuing in migration code.
1334 kes Apply implementation of tray-monitor font derived from gnome-console
1335 submitted by Andreas Piesk <a.piesk@gmx.net>
1337 kes Eliminate important memory loss in SQLite
1338 kes Fixed the batch insert MySQL thread specific data that was not
1339 being freed. See cats/mysql.c:db_thread_cleanup().
1340 kes Fix restore before command.
1341 kes Convert old hdr.name to name() in a few places.
1342 kes Implement update jobid command.
1343 kes Return all time_t dates in db_get_job_record()
1344 kes Stop watchdog in SD earlier.
1345 kes Put Pool just after Storage in please mount message.
1346 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1349 kes Update the po files.
1350 kes Fix Verify InitCatalog by making it cache attributes.
1352 kes Change name bacula-bat to bat for man 1 page to correspond to
1354 kes Check for client and store NULL pointers in status command. This
1356 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1357 kes Fix sign extended editing of %p.
1358 kes Clean out a little old #ifdefing in cats/mysql.c
1360 kes If time diff between DIR and FD is more than 600 seconds convert
1361 INFO message to WARNING.
1362 kes Implement heap size display in status for all daemons.
1363 kes Attempt to fix MySQL db open memory loss (not successfull).
1364 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1365 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1366 Query. This looks like a MySQL but but by doing extra releases,
1367 the memory goes away. This should fix bug #847.
1369 kes When backup fails, cancel SD before waiting for sd termination.
1370 kes If SD is waiting for FD to connect during cancel, wake up the
1372 kes Fix fsf code so that errno is correctly reported.
1373 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1375 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1376 so that Bacula doesn't later stumble into a seg fault.
1377 kes Use the term Restore Client in the restore Job report.
1378 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1379 the original job's FileSetId.
1380 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1381 spooling in migration jobs. Not yet tested.
1382 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1383 reading conf file from a pipe. However, do it with open_bpipe()
1384 rather than popen. Not yet tested.
1386 kes Fix an ugly bug where the VolCatBytes were getting updated
1388 kes Implement bconsole memory command that prints current memory
1389 usage, plus smartalloc dump.
1390 kes Clarify some error messages in backup, admin, and migrate.
1391 kes Shrink label dialog to smaller size.
1392 kes Invert Cancel OK buttons on restore to be OK Cancel.
1393 kes More strerror() to bstrerror() conversions.
1395 kes Start implementing bstrerror() in place of strerror().
1396 kes Stripping path -- seems to work.
1398 kes Prevent door and port files from being restored (mostly
1400 kes Free an unreleased buffer in compat code.
1401 kes Change console Job name from *Console* to -Console- to eliminate
1402 Win32 filename problems. Put Win32 path separator when creating
1403 Console file. This fixes bug #846.
1404 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1406 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1408 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1409 to force Win32 error message.
1411 kes First cut strip path. The data should be passed to the FD,
1412 but nothing is done with it yet.
1413 kes Enhance the digest and signature routines in the crypto
1414 library to accept a JCR and to use it to print error messages
1415 so that they will go in the Job report rather than the daemon's
1417 kes Simplify some of the verify signature code.
1418 kes Simplify a few of the alternative returns in the signature
1421 ebl Use only POSIX regex instead of GNU regex in breg.c for
1422 File relocation. It fix broken freebsd compilation.
1423 kes Convert all other Dir files to use new ua class message
1425 kes Tentative fix for missing digest signature in bug 807.
1426 kes Correct handle problem in new win32_ftruncate routine.
1427 kes Convert ua_purge.c and ua_update.c to use new ua class
1428 message routines for bat.
1430 kes Correct incorrect installation of LICENSE in Win32 installer.
1431 kes Display LICENSE at the beginning of the Win32 install.
1432 kes Attempt to correct the need for the png files to be installed
1434 kes Reapply my bat.conf install script in qt-console. I think I
1435 editted bat.pro instead of bat.pro.in and it was lost.
1436 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1437 the /var/lock/subsys for subsysdir. Also corrects typos in the
1440 kes First cut update job.
1441 kes Correct configure to include qmake of src/qt-console directory.
1443 kes Make restore job yes/mod/no print in one command so GUI works.
1444 kes First cut implementing backup and restore client.
1445 kes Correct editing in Verify output that caused a seg fault.
1447 kes Insure that bat.conf is not overwritten during installation.
1448 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1449 while I was implementing migration in March 2006 !
1451 ebl Cleanup file relocation, using char *RegexWhere instead of
1452 char *where + bool where_use_regexp
1453 kes Update some manpages and add bat manpage.
1454 kes Make a first cut at converting bacula.spec.in for bwx-console
1456 kes Apply patch from John Goerzen to add hostname as fourth argument
1457 to make_catalog_backup script.
1458 kes Fix typos I introduced into bsmtp.c
1459 kes Make pm_strxxx() routines handle input of NULL pointer. This
1460 is to protect from NULL pointers returned from SQL databases.
1461 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1462 kes Add more debug to FIFO code -- fix fifo regression test.
1464 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1465 kes Add thread timer to bnet_connect() to break from OS if wait time
1468 kes Update Win32 build to include new files, new symbols, and
1470 kes Implement socket level heartbeat (tcp_keepidle)
1471 ebl Commit File relocation patch
1472 kes Make bat have 'make install' target.
1473 kes Warn during install if old gnome-console binary found.
1474 kes Warn during install if old wx-console binary found.
1475 kes Add -8 option to bsmtp command line to add content type utf-8.
1476 Fixes bug #809. (Character coding problem in bsmtp).
1477 kes If < is found in target (from, to, cc) then do not enclose the
1478 target in < > in bsmtp. Fixes bug #772 (malformed address).
1479 kes When printing certain items in dbcheck, stop after 300000.
1480 Fixes bug #822. (dbcheck loops).
1481 kes Incorrect status in Dir after waiting for mount with poll set.
1484 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1486 kes Print waiting to reserve a device every 5 mins.
1488 kes Don't call close_part in label.c if tape and relabel.
1489 kes Don't free volume if busy in close() -- should help with
1491 ebl Fix #824 RunScript bug (After script could be execute twice)
1492 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1493 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1494 Add a regression script to test RunScript
1496 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1499 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1500 deprecated. No additional bugs will be fixed, and they will be dropped
1501 in a future release (probably 2.4.0).
1502 kes Change name of wx-console to bwx-console to make it more Bacula
1504 kes Change the name of gnome-console to bgnome-console to make it
1507 kes Some time in March, a Feature Request with patch from Jorj Bauer
1508 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1510 The ability for the director to validate a Client (FD) CN against
1511 an arbitrary set of patterns rather than the hostname, with
1512 A new 'TLS Allowed CN' set of directives which are implemented
1513 in the Client resource. Then pattern matching is used in place
1514 of hostname matching against the Certificate's CN. As an example, we
1515 have certificates which (a) use a local CA, and (b) have a CN of the
1517 kes Add new/changed entry points to Win32 build
1518 kes Create unaccepted-projects for projects that are not accepted.
1519 kes Simplify locking in the reservations system.
1520 kes Add more debug code in reservations.
1521 kes Make sure error condition on reserving a volume is handled correctly.
1522 kes Correct handling of volume_in_use.
1523 kes Correct handling of initializing a device.
1524 kes Move handling of broadcasting releasing a device into release_device().
1525 kes Correct attaching dcr to dev so that it is only done if device
1526 is properly initiated.
1528 kes Locking debug level tweaks in SD.
1529 kes Tweak new Volume code.
1531 kes Add exec external-command [wait-seconds] to bconsole. This
1532 executes the external-command. Note! normally external-command
1533 should be enclosed in double quotes.
1534 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1535 it should normally be off in a production system.
1537 kes Implement die command for SD so that we can force it to dump.
1538 kes Implement SD lock debug code.
1539 kes Implement new algorithm for keeping Volume list in SD. It
1540 is now owned by the device.
1542 kes Implement new code for freeing in use volumes that should
1543 resolve if not all, some of the problems of multiple drive
1544 tape conflicts described in bug 801.
1546 kes Fix gui/bacula-web/images files in svn.
1547 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1549 ebl Fix a bug in batch mode (in string escape)
1550 kes Correct migration prune SQL typo that crept in in a
1551 recent 2.1.x change.
1553 kes Move bnet_despool() into class in bsock.c
1554 kes Modify job report to include director name and Build OS.
1555 kes Move drop root privilege and check_catalog() before fork.
1556 kes Add update database scripts (version 9 to 10) to updatedb directory.
1558 ebl Check size and age of each file after its backup to see if
1559 it has changed during backup, if 'checkfilechanges' is set.
1560 The FD will do an extra check (stat(2)) after
1561 each file backup. mtime, ctime and size are compared with
1562 'before backup' information. If time or size mismatch, an
1563 error message will be generated. You must upgrade FD to use it.
1565 kes Make database name and user configurable
1566 --with-db-name=xxx --with-db-user=xxx
1567 kes Add back database type to message.c for debugging.
1569 kes Implement dir_sql() which issues an SQL query.
1570 kes Modify bat medialist to use dir_sql() and do some minor C++
1571 formatting as well as eliminating a number of pointers, simplifing
1574 kes Fix some of the mtx-changer grep commands for tape label readers.
1575 kes Convert a number of bsendmsg into the appropriate send/warning/error
1576 message class calls.
1577 kes Suppress the using database message in the .sql command.
1578 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1580 kes Add context menu for floating a window.
1581 kes Some minor cleanup and name changes in qt-console
1582 kes Add doing mt setblk 0 in Win32 mtx-changer.
1583 kes Apply Martin's bug fix to move definition of ENODATA for
1585 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1586 sqlite2 and sqlite3.
1588 kes More pruning cleanup.
1589 kes Turn on wait_for_drive by default in mtx-changer.
1590 kes Turn on Batch insert code by default as it now passes regression.
1591 kes Add ./configure --enable-bat to enable building of Bat.
1592 No install yet though.
1594 kes Implement a new .sql command for bat.
1595 kes Implement code to turn off pruning in obtaining the next volume.
1596 Pruning is turned off for the status dir command, but turned on
1597 for SD requests and for the list nextvolume command.
1599 kes Correct Qmsg() that was not updated correctly when committing a
1600 previous change (probably the recent TLS patch).
1602 kes Write new subroutine is_volume_purged() that explicitly checks
1603 if the Volume is purged, and if so marks it as such. This should
1604 resolve problems reported about needing to mount twice to recycle
1606 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1607 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1608 amount of duplicated code.
1609 kes Do volume pruning only for the Media Type desired (reduces pruning time
1610 if multiple Media Types are in the same pool).
1611 kes Implement more detailed info in the Job report for the Bacula version
1613 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1615 ebl Add bbatch tool to bench database and insert mode.
1616 Fix sql quote stuff in batch mode
1617 Fix sql stuff for mysql
1619 kes Correct problems with am/pm scheduling. Fixes bug #808.
1620 kes Implement new prunning code that prunes up to 1000 jobs at
1621 the same time. The same technique can be applied to a number
1622 of other prune/purge subroutines.
1623 kes Add an insanity check when starting a new tape job to ensure
1624 that the tape position has not been changed. If so fail the
1626 kes Fix Win32 build for dlls to add the folllowing:
1627 src/lib/bsock.c -- new file with new entry points
1628 src/lib/dlist.c -- new entry points
1629 src/cats/sql_create.c -- new entry point
1630 src/cats/sql_cmds.c -- new DATA item exported
1632 ebl batch mode cleanup bscan-test is ok now.
1633 kes Implement SD code to check length of disk volume before appending.
1635 kes Correct return status on db_batch... routines.
1636 kes Add call to db_write_batch_file_records() to migration code.
1637 ebl Fix AfterJob timing
1638 kes Move the checking of the database in initializion of the Director
1639 to after we drop privileges. This avoids the need for both root
1640 and bacula access to the DB.
1641 kes Correct a misplaced variable definition in src/filed/backup.c
1642 kes Correct how the new batch insert db_create_attributes_record()
1643 uses the arguments. Caused a seg fault in bscan.
1644 kes Implement lock() and unlock() methods in DEVICE class.
1645 Implement block() and set_block(xx) methods in DEVICE class.
1646 kes Modify bnet_connect() so that it uses time() to check for the
1647 wait time expiring (on some OSes, some system calls may not
1648 return immediately).
1649 kes Modify Verify to obtain the previous JobId when it is actually
1650 running rather than at schedule time (as it was in 1.38.x).
1651 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1653 kes When checking pid in pid file, continue running if the pid is
1654 the same as ours. This occurs on IRIX after a system crash.
1657 kes Extend new GUI API.
1658 kes Make the ua structure a class, and implement send_msg(),
1659 error_msg(), warning_msg(), and info_msg().
1661 kes Apply fix from for building wx-console on the Mac from
1663 kes Implement new select mechanism for GUI programs.
1664 kes Reorganize initialization of stackedWidgets in bat.
1666 kes Add updated nagios plugin supplied by Christian Masopust.
1668 kes More bat implementation.
1669 kes File migrate bug with Pool Occupancy using mediaid instead
1670 of jobids. Fixes bug #795.
1671 kes Fix orphaned buffers in filed backup and verify due to
1672 crypto buffers not freed during errors. Fixes bug #789.
1673 kes Extend new GUI api code to tree commands.
1674 kes Ensure that tree and dot commands check console ACLs.
1675 kes Permit marking directory with trailing slash.
1676 kes Allow 20 console connections (instead of only 10).
1678 kes Add smartctl call to bacula-sd.conf as an example of getting
1681 kes Modify jobq.c to let simultaneous restore jobs run. This may
1682 cause them to fail if they cannot get a drive.
1683 kes Add Client Connect Wait to Storage daemon to permit users to
1684 modify the time the SD waits for a FD connection.
1686 kes Correct virtual changer check which was backwards. This caused
1687 volumes to be unloaded into slots already occupied.
1689 kes Apply Command ACL filter to JobId list in restore command.
1690 kes Correct typeo in var.c patch.
1692 kes Don't let Bacula prune File or Job records for the current Job.
1693 kes Fix variable substitution pad + inc bug reported (with patch)
1696 kes Correct SQLite log table index as reported by Luca Berra.
1698 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1700 kes Begin implementing new comm signals for API.
1701 kes Fix a few places in lib/message.c where the open fd may
1703 kes Continue implementing lib/bsock.c (real class). Make jcr,
1704 who, host, and port private. There are new methods to access
1705 them for non-class use. This required touching a number of files.
1707 kes Add LANG=C to autoconf/randpass so it works with languages other
1708 than English. Fixes bug #788.
1710 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1712 You will not be able to generate Include/Exclude list any more.
1713 It will be fixed soon.
1714 If you want to use this, you can apply
1715 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1717 kes Restore of sockets created false error messages because Bacula
1718 no longer restores sockets, but the code was still trying to
1719 set the attributes on a non-existent file. Reported by a user.
1720 ebl finish RecyclePool feature
1721 Media will takes Pool.RecyclePool
1722 when moving from Scratch to a Pool or when user will do
1723 update volume=xxx frompool
1724 To use it, add RecyclePool = aPool to your Pool resource
1727 RecyclePool = Scratch
1731 kes Expand new BSOCK class adding signal() and new BNET signals.
1732 kes Begin enhancing the dot commands adding a new API function
1733 that returns more information and will make it easier
1734 to interface to the Director from a program.
1736 kes Make DEVICE fd private. Its new name is m_fd, and can be
1737 obtained with dev->fd() outside the class. This is the
1738 first of many DEVICE members to be made private.
1739 kes Implement Michael Renner's idea on having a virtual disk
1740 changer. I made some minor modifications (e.g. I did not
1741 implement the Virtual Changer directive, but simply set
1742 the Changer Command to an empty string.
1744 kes Implement a BSOCK send() method that writes the whole record
1745 in a single write() request rather than in two.
1746 ebl add update volume=xxx recyclepool=yyyy
1747 volume takes recyclepool from pool when using update volume=xxx from pool
1749 kes Fix encryption deblocking bug, which caused some restored files
1750 to be truncated. This fixes bug #763.
1751 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1752 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1754 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1755 ebl Use btime_t instead of uint64_t in media patch.
1757 kes Optimize the use of the database a bit in the Status dir command.
1758 Only open it when needed, ensure that if any previous database
1759 was opened, it is closed.
1761 kes Correct VolCatBytes bug from media patch.
1762 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1763 in the case of orphaned records.
1764 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1765 and File records in 300K chunks to be more efficient. This
1766 idea came from Juan Luis Frances (if I remember right).
1767 kes Apply Eric's scratch patch that moves a purged Volume to
1768 the RecyclePool. Question: how is RecyclePool set? what
1769 happens to the ScratchPool?
1770 kes Apply Eric's media patch that collects read/write media
1771 times as well as byte counts. This patch requires a
1772 simultaneous upgrade of the DIR and SD. Note, there
1773 should be some way to turn off timing. I'm not sure
1774 times are in Bacula units.
1775 kes Apply Eric's batch-insert patch.
1777 kes Update projects list.
1779 kes Implement Include/Exclude file lists in FD as dlists using
1780 the new dlistString class. This permits efficiently having
1781 large include/exclude lists and completes project Item 25.
1782 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1783 console is authorized to cancel the job. This fixes bug
1785 kes Modify SD so that the VolCatJobs medium record is updated
1786 at the beginning of a Job rather than the end. This
1787 fixes bug #775 where exceeding MaxVolJobs caused jobs
1789 kes Added a mutex around getting and setting Volume information
1790 so that multiple simultaneous jobs will single thread.
1792 Switch to using Subversion
1793 kes Remove src/pygtk-console/ from configure
1795 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1796 plus the entrypoints.
1797 kes Apply patch supplied that corrects debug print
1798 in canceling jobs for max run time. Supplied as
1799 part of bug #621, which was previously fixed.
1801 kes Test on job_canceled() and sd_msg_thread_done inside
1802 loop starting the message thread to avoid a race condition.
1804 kes Remove rl_catch_signal from console.c as it conflicted
1805 with the header definition. Fixes bug #765.
1806 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1808 kes Clarify some stored/acquire messages to indicate if the
1809 problem is with read or append.
1811 kes Fix memory leak with storage ids in cats/sql_get.c
1812 kes Terminate watchdog earlier to avoid reference to released
1813 memory -- reported by Jason Austin.
1814 kes Move closing the database from jobq.c to the director daemon
1815 termination routine. This fixes memory leaks for shadow jobs
1816 (i.e. migration jobs).
1817 kes Free up the unique jobid chain items in migrate.c. This fixes
1818 a memory leak problem.
1819 kes Convert some ugly looking for statements to use foreach_alist
1820 in findlib/find.c. This will facilitate converting the structures
1821 to use dlist (for large include/exclude lists).
1822 kes Fix a bug in the btree.c and btree.h routines, then rename them
1823 rblist and add them to be built in src/lib. Include some new
1824 methods written by Rudolf Cejka that make the code more readable
1825 (hides some of the ugly casting).
1826 kes Add set_next() and set_prev() methods which make the code much more
1827 readable. Also add a new dlistString class that facilitates storing
1828 strings in dlists. To be used in the large include/exclude lists.
1829 kes Make some trivial modifications to lib/tree.h that use rblist
1830 rather than dlist for storing the tree links. This was suggested
1831 by Rudolf Cejka. The result of this is that the restore tree now
1832 uses red-black binary trees rather than simple linked lists. This
1833 should give rather dramatic speed improvements for directories
1834 contining large numbers of directories/files (more than 10000).
1836 kes Fix maxruntime bug #621.
1838 ebl Implement the include JobID in spool file name project.
1839 kes Reorder projects file in order determined by Jan 2007 vote.
1840 kes Implement item #12 on project list -- quick release of FD by
1842 kes Fix open of SQLite3 db where user does not have write permission
1843 so that DIR does not crash. Fixes bug #761.
1845 kes Add back missing @ in Win32 Makefile.
1846 kes Change 'Device not configured to autolabel' from INFO
1848 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1849 which should restart an indefinite # of times.
1850 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1851 other DIR specifications.
1853 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1854 Fix path quoting in SQLite scripts.
1855 Fix problems with SHGetFolderPath.
1857 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1859 kes Fix Job restart on error bug that promotes an Inc to a Full
1860 backup. This should fix bug #755.
1861 kes Add qt-console and first cut of code.
1865 kes Fix Bacula->Documentation link on Win32 to point to index.html
1866 instead of bacula.html. Fixed bug #750.
1867 kes Return JobId in db_get_job_record() when JobId==0. This should
1869 kes Do not release source pointers when restarting a failed job.
1871 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1872 This *should* fix bug #747.
1873 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1876 kes Modify USTORE constructor to set an empty store_source string,
1877 and don't copy the store_source string in a cancel. Hopefully
1878 this will fix Arno's seg fault, bug #744.
1879 kes Add back code to disable conio in configure. Fixes bug #743.
1880 kes Correct the Options scanner in the FD to correctly handle
1881 SHA1 option, which was eating the next option. Reported by
1883 kes Add code to indicate when the SD is spooling, spool wait, and
1884 despooling as requested by Alan Brown.
1886 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob