1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
34 kes Move setting JobLevel and JobType into a method, which should
35 allow completing Virtual Backups.
36 kes Fix verify jobs to work again.
38 kes Virtual Backup tweaks -- it is close to working.
40 kes Ensure that SD tried to mount a volume not in an autochanger
41 at least once before asking for operator intervention.
42 kes Make SD aware of Virtual Backup jobs.
43 kes Add VirtualFull for bat.
44 kes Changes to get read storage correct for Virtual Backup.
46 kes Remove old code from label.c
47 kes Split display_display_info() out of write_bsr_file()
48 kes do_vbackup_init() working -- i.e. bootstrap file built.
49 kes Change Bacula trademark owner from John Walker to Kern Sibbald
50 kes First non-working cut of vbackup
51 kes Correct FD heartbeat code to use volatile variable accessed by
53 kes Zero thread id with memset if on Win32 in case it is a struct.
54 kes If cannot create JobMedia record, continue to try to write eof
55 and clean up in block.c
57 kes Add code to interface OpenSSL to new Win32 pthreads code which
58 used a structure for thread_t.
60 ebl tweak bat for win32 compilation
62 ebl Remove tokyo cabinet from the source
63 ebl Update configure/autoconf to support berkeley DB
64 ebl Add a sort to db_get_file_list() to improve bsr construction time.
66 kes Add a mtx-changer.conf file that is not overwritten during
67 an upgrade. It fully configures the mtx-changer script.
68 kes Clear in-use bit on vol when unused while swapping.
70 kes Remove sleep at end of ./bacula
71 kes Clear hash packet for hardlinked files correctly. This corrects
72 a long standing bug where hardlinked files selected individually
73 would occasionally not be restored.
75 kes Apply Eric's patch to ensure that autoprune does not return
76 a Volume not in the autochanger unless requested to do so.
77 kes Correct bat restore display of multiple drives. This fixes
79 kes Do find_a_volume() each time an unload is done. This
80 fixes the failure of maxvol2-test.
82 kes Add some SD debug code.
83 kes Do find_a_volume() each time an unload is done.
84 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
85 and adds --with-db-port to ./configure.
86 kes Use Qmsg() in job.c watchdog callback.
88 kes Release main control rwlock if ABORTing.
89 kes Make watchdog connect timeout queue messages rather than sending
90 directly to avoid lock conflicts with the real thread.
91 kes Add const char in dbd.c to avoid compiler warnings.
92 kes Fix python compiler string warning. Note, IMO the GNU C++
93 compiler guys have made a *very* bad change to their compiler.
94 They now force all strings to be 'const' unless you explicitly
95 cast them, which is extremely ugly and ruins nice code as well
96 as creates a lot of useless work.
98 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
99 mt. This fixes bug #1116.
100 kes Add const in python files to reduce compiler warnings.
101 This may have to be backed out because of later compiler
103 kes Fix failure of 2drive-concurrent-test. Always read label;
104 clear_unload() only after drive is defined in acquire_for_read().
106 kes Generally clean up the manual tape loading code. The main
107 conceptual change is that when a volume is marked to be unloaded,
108 its volume name is retained, and it is only marked as unloaded
109 when either the autoloader says it is unloaded or another tape
110 is read on that drive.
112 kes Add debug code and refactor subroutine in stored/mount.c
113 kes Fix format problem in bscan output reported in bug #1105.
114 ebl Fix get_next_volume_for_append logic with autochanger
115 - use pruned volumes if found
116 - don't reset the inchanger flag after getting a recycled volume
118 Fix recycle_oldest_purged_volume to take InChanger flag in account
120 ebl Add mmap/unmmap implementation for tokyodbm under win32
122 kes Make first step toward eliminating globals from config
123 scanning. Also should be a workaround for FORTIFY_SOURCE
124 GNU C bug -- fixes bug #1042.
126 kes Apply duplicate job tests to restarted jobs.
127 kes Copy more data when restarting a job so that run
128 overrides are kept. This should fix bug #1094.
130 kes More word alignment cleanup.
131 kes Fix bug where SD did not ask operator if the device could not
132 be opened. Reported by Eric.
134 kes Add dbuser to DIR conf file (replaces user).
135 kes Add --with-db-password to ./configure
136 kes Fix regress to handle db_password.
137 ebl Add new "status storage slots" that list autochanger
139 ebl Update vtape driver to compile only under Linux.
140 ebl Fix a bug when restoring with a wrong mediatype.
142 kes Eliminate ints from conf files and structures to avoid
143 word alignment problems
145 kes Fix bug reported by Scott Barninger where the bacula script
146 refers to scripts in the wrong directory. Needed to meet the
147 requirements of recent FHS location changes.
148 ebl Disable vtape for FreeBSD.
150 ebl Modify disk-changer to check if slot contains something before
153 ebl Fix vtape on win32 and debian.
154 ebl Fix autoselect patch (cause segfault).
156 ebl Fix autoselect option broken for a while. Fix #1089. Need some
157 work with StorageId to be able to use a particular drive in a
160 ebl Rename vtape to vtape.
161 ebl Update vtape driver.
163 ebl Modify vtape driver to avoid sparse file.
164 kes Add make clean of qt-source directory during ./configure
165 kes Store last block number written to tape in DEVICE and
166 use it for testing for correct last block on EOT.
168 Release Version 2.4.0:
172 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
173 This fixes bug #1095.
175 kes Add create_postgresql_database.sql to Win32 installer. Should
176 fix problem reported by Juilio Monteiro.
177 kes Get correct slot when auto unloading a device. This fixes bug
180 kes Fix multiple media restore.
181 kes Make DEVICE Slot private and access it via a method.
182 Allows better control over when it is set and cleared.
183 kes Fix possible seg fault if SQL error.
185 kes Add Martin's fixes to argument scanning for the estimate
186 command. This fixes bug #1093.
187 kes Add debug code to SD.
188 kes Fix renaming a Volume, which used the wrong Volume name.
190 kes If operator has rewind tape, print warning, release tape and
191 try once more. If tape is positioned somewhere, something went
192 wrong, so mark the tape in error and try once more. Previously
193 this error was fatal, now it produces an error message.
194 kes Ensure correct volume name displayed during restore
195 kes Ensure that Volume is mounted for restore.
197 kes Fix a few more Coverity reported problems.
199 kes Apply Allan Black's status dir job count patch.
200 ebl Add information about IMPORT/EXPORT slots in mtx-script.
201 kes Enhance a couple of SD debug messages.
202 kes Tweak unload flag setting and ensure it is set during swap.
204 ebl Fix #1091 about bad output in estimate command.
206 kes Modify autochanger locking to attempt to avoid race
208 kes Make sure device not busy before doing label command.
209 kes Display open() errors except when polling. Previously too
210 many were suppressed. This should fix bug #1070.
211 kes Fix Win32 reparse points. Bacula will not recurse into any
212 reparse point directory, including mount points, unless the
213 directory is explicitly mentioned at the top level (same as
214 with Unix). A file that is linked to another file will be
215 backed up -- much as Unix does for hardlinked files.
216 This fixes bug #1041.
218 kes Remove double quotes from ChangeLog and ReleaseNotes
219 kes Remove StorageId test when pruning and recycling (Eric's changes).
220 kes Remove old form of locking when getting volumes -- causes deadlock.
221 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
222 the name unique and to eliminate compile time error.
223 kes Add accurate.o to Win32 FD Makefile
225 kes Fix cats dll build on Win32 after db_update_job_end_record
226 calling sequence change.
227 ebl Switch to tokyo dbm instead of htable in accurate code
228 ebl Include tokyo dbm to bacula source tree
230 kes Fix buffer overruns detected by Coverity.
232 kes Tweak joblog display.
234 kes Implement --without-qwt
235 kes Fix layout of restore tree dialog
236 kes Add configure bat QWT libraries, so that bat can be built
237 with or without the QWT libaries.
239 ebl Add dummy tape driver for regression tests.
240 kes Make sure we unload the right slot when swapping.
242 kes Add debug times, reduce size of two-pool-changer test
244 ebl Tweak autoconf scripts for vtape
246 kes Improve SD reserve debug code.
247 kes Testing an improvement to free up volumes no longer in use.
249 kes Rework SD acquire for read to handle autochanger Volume
251 kes Implement regression that explicitly tests swapping a Volume
252 from one drive to another.
253 kes Enhance disk-changer to detect most error conditions.
254 kes Fix SD code so that it properly swaps a Volume between drives.
255 This fixes bug #1083.
257 kes Apply libdbi patch from Joao Freitas for regress and for
258 Bacula trunk. Regress now works with libdbi. Nice.
259 kes Apply .nobackup patch from bug #1077 submitted by
261 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
262 name into jobs cloned via the run directive.
264 kes Prevent a Volume that is being swapped from being freed from
265 the volume list. This will most likely fix, at least partially,
267 kes Fix strippath so that it does not get a buffer overrun and crash FD.
268 This fixes bug #1078.
269 kes Remove 50 millisec wait in SD that broke debugger.
270 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
271 that a job may run, counted from when the job was scheduled.
272 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
273 a job may block waiting for a resource, counted from when the job starts
274 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
275 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
276 that implements multiple commands per line in the console when using
277 readline. Modify the default to use a semicolon as the command separator.
279 ebl Fix SQL query in migration code.
280 ebl Make accurate mode with hash disk pass regression tests
282 ebl Implement first cut of accurate backup with hash disk.
284 kes Force unload of volume when wrong volume mounted in SD.
286 kes Fix bat seg fault at termination.
287 kes Add Bacula generated version to bat about box.
290 kes Experiment with allowing multiple read jobs.
291 kes Move final volume swapping code to DCR method and
292 call it from acquire_for_read().
293 kes When wrong volume is mounted during read, unload_autochanger.
295 kes Integrate the libdbi changes from Joao Henrique Freitas
297 kes Stop searching for Volumes in SD askdir if DIR returns the
298 same volume name twice in a row.
299 kes Close bat console windows first to eliminate error message
302 kes Tweak the swap Volume from one drive to another code so that
303 it now seems to work.
304 kes Resolve several problems with recycling that broke the new
305 code (these problems are in 2.2.9 as well).
306 kes Remove the volume lock when calling the sysop code.
307 kes Don't mark a reserved volume with no writers as unused otherwise
310 kes Rework class structures for VOLRES, DCR, and DEVICE to make
311 the method names a bit more logical, and for more logically
312 handling the responsibilities.
314 kes Remove redundant code in terminating the scheduler that just
315 causes a seg fault in many cases.
316 kes Cleanup releasing a volume and make it a DCR method.
317 kes Improve algorithm for detecting pre-reserved volume and
320 kes Tweak volume swapping code so it works.
321 kes Correct name overloading in mount.c
322 kes Replace released flag in VOLRES with reserved and add access
323 methods for the VOLRES class.
324 kes Prevent volume from being released while being swapped.
325 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
327 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
329 kes Refactor parts of stored/mount.c
331 ebl Add sanity checks for VolWriteTime and VolReadTime
332 ebl Take care of bad clock changes while computing VolWriteTime
333 and VolReadTime. This should fix or limit #1066
334 kes Correct error string numbers in dird/catreq.c
335 kes Restructure reserving, acquiring, and mounting volumes. Calls to
336 autochanger are deferred for mount.c -- simplifes the code.
338 kes Do not prune any running job. It just fails the job.
339 kes Lock the volumes when changing dev->reserved_device and marking
340 the volume unused otherwise the device can get reserved by
341 another job before the volume is released, thus blocking it.
343 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
344 kes Fix bug #1063, reuse of freed ptr in list nextvol.
345 kes Release regex compile buffer in filed/job.c
346 kes Add proper type of const char in sql_create.c
347 kes Turn off debug in daemon termination routines
348 kes Move free_volume_list() before devices are freed in stored.c
349 kes Fix reference to uninitalized stack variables in bregex.c.
350 This should correct bug #1067.
352 kes Fix possible seg fault in SD when freeing a volume entry.
354 kes Implement unload_dev() before swap device.
355 ebl Add statistics prunning with option and menu
356 kes Separate unload_dev() from unload_other_device() in autochanger.c
358 kes Apply patch from bug #1069 that corrects spurious error messages
359 when ACLs enabled on SGI but no ACL exists.
360 ebl Fix small segfault in bacula-sd when debug level is 500
361 kes Modify run_program() and run_program_full_output() to use
362 call by reference for the results string. This corrects a long
363 standing problem where the address of the string may be changed
364 in the subroutine but not in the calling program.
366 kes Re-enable code to remember last volume mounted on a non-tape
368 kes Add patch supplied in bug #1068 that fixes a SD crash when using
369 a Virtual autochanger.
370 kes Generate correct JobMedia records during spooling/despooling when
371 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
372 <tih@hamartun.priv.no> for excellent analysis and testing.
374 kes Tweak hash algorithm for htable using Martin Simmons idea
375 for doing a circular shift.
376 kes Remember what volume is in VTLs (previously turned off for
378 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
379 pointed out some problems in creating JobMedia records during
380 spooling with concurrent jobs. Fix the problem by updating the
381 start file position before despooling and generate a jobmedia
382 record at the end of despooling.
384 kes Fix handling of JobMedia records during spooling and when a
385 Volume is changed without actually writing data to the Volume.
387 kes Rework certain SD locking based on gdb tracebacks of deadlocks
388 sent by Eric. This code now uses only the volume_lock() rather
389 than the reservations lock when at EOM and acquiring a new
391 kes Ensure only one exit point in several subroutines.
393 kes Implement bsock code to permit locking. Use the new code in Verify
394 in the FD to prevent the heartbeat thread from disrupting the Verify
395 data sent to the Dir.
396 kes Modify SD locking to eliminate locking the reservations system from
397 outside the system. Use the volume lock when getting media data
398 and reserving a new volume at end of media.
399 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
400 when SD starts are not locked into place.
402 kes Fix error compiling runscript code on 64 bit machines.
403 kes Tweak Win32 mount point code.
404 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
405 cleared giving bad file estimate).
406 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
409 kes Keep Schedule run lists in order as suggested by
412 kes Implement autostart scripts for Debian.
413 ebl Implement upgrade catalog scripts.
415 ebl Apply jobstat patch for long term statistics. Have to implement
416 purge stats command and upgrade scripts.
417 kes Fix mtx-changer.in for broken Debian mt program.
419 kes Fix large number of JobMedia records reported by Eric Bollengier.
421 kes Apply doc fix from bug #1062.
422 kes Resolve crash and improper restore wx-console Win32 restore
423 GUI. Fixes bug #1065.
424 kes Update Win32 wxWidgets to latest version.
425 kes Attempt to do correct handling of Win32 mount points. Should
427 kes Fix Win32 FD backup/restore memory leak due to improper termination
428 of BackupRead/Write. This fixes bug# 1038.
430 ebl Reduce memory usage for accurate backup, working only with ctime
431 and mtime. (not all Lstat field)
432 About 40MB for my Linux system (400.000 files)
434 kes Add dcr->reserved_volume flag that allows us to release a volume
435 even if it is not vol->released. This allows maxvol2 to work when
436 Volumes expire and we are already writing to the device (i.e. a
437 volume is pulled out from under us by another job terminating after
438 we reserve the drive).
440 ebl Permit multiple command/console per runscript definition.
441 RunScript { command = /bin/true ; command = /bin/false ... }
442 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
443 (restart an application) just after the VSS snapshot on windows.
444 kes Don't zap dcr values during release_volume() as they might
445 have the next Volume to be mounted.
446 kes Fix AIX prototype.
448 kes Second cut of drive switching during backup.
451 kes Update Win32 version of wxWidgets to most recent version.
452 kes Tweak Copy job details.
453 kes Rework dir_find_next_appendable_volume to make a bit more effort
454 to find a suitable volume before giving up.
456 kes Make ask_sysop_to_create... to return if waken from wait.
457 This helps get out of blocked conditions.
458 kes Experimental implementation of switch_device in reservations.
459 kes Implement FD version to allow easier protocol changes.
460 kes Add Plugin Options string -- not yet passed to FD.
461 kes Implement PluginOptions ACL.
463 kes Attempt to correct problems with restores with autochangers and
464 use counts going negative
465 kes Rework SD status command and implement API for bat. Implements
466 header, runing waitreservation, devices, volumes, spooling,
467 and terminated status keywords.
468 .status storage=xxx <keyword>
469 kes Clarify TLS error message by adding double quotes around name.
470 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
471 kes Pass jcr to tls routines so debug messages can be handled better.
472 kes Rework jobq resource allocation code, and possibly fix a bug
473 that caused reference counts to get out of sync.
475 kes Rename fd/dir plugin to use Bacula standard underscore.
476 kes Plugin work -- bring dir up to fd level.
477 kes Start implementation of VTL code
478 kes Fix Win32 build after adding new cats subroutine.
480 kes First cut at Duplicate Job implementation.
482 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
483 kes Start PluginOptions string, and refactor a bit of ua_run.c
484 ebl Apply Allan patch that permit to reset recyclepool.
486 kes Test patch -- possible fix or improvement for bug #1053
487 kes Refactor FD and SD status commands to permit new API code in
488 SD, and to fix Win32 build.
489 kes Win32 build is now working.
491 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
492 some ideas in patch from Scott Bailey.
493 kes Begin implementation of duplicate Job control.
494 kes Fix some of Win32 build after recent additions.
495 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
496 which causes the FD to detect whether or not the OS has the
497 honor no dump bit (*BSD systems), and if so, to skip backing up
498 any file with this bit set. The feature is enabled by setting
499 'honor no dump flag = yes' in the Options section of a FileSet.
501 kes Correct po warning message with datarootdir
502 kes Implement more code in dird.c to put configuration parsing in
503 a class rather than use globals.
504 kes Restructure SD status command for implementation of bat API
507 kes Suppress incorrect 'Will not descend from x into y' messages.
508 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
509 daemon globals used by parser.
510 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
512 kes Fix free of plugin_list when none exists.
514 ebl Apply accurate project patch.
516 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
517 on non-mempool object)
518 kes First cut of converting FD .status to work with bat API.
520 .status client=XXX header
521 .status client=XXX running
522 .status client=XXX terminated
523 kes Implement first cut of Copy Job.
524 kes Implement Catalog in Pool resource. It overrides catalog specified
525 in the Client resource.
527 kes Apply patch (with some difficulties) from Joao Henrique Freitas
528 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
530 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
531 ftruncate() actually works. In the case of some (cheap) NAS devices,
532 it does not, and so recycling NAS Volumes does not work. The code
533 simply unlink()s the file, then recreates it. This fixes bug #1011.
535 kes First incomplete cut of big malloc blocks for htable.
536 kes Tweak plugin code.
538 kes Plugin debug code + tweak a couple bat dialog layouts
540 kes Fix creating first JobMedia record during Migration to include
541 proper index. This caused slow restores of migrated jobs.
542 kes Temp fix to plugin name file_index.
543 kes Bacula backed up and restored a MySQL database.
545 kes Implement plugin restore.
546 kes Implement parsing of db_driver to give db_type index.
548 kes First cut of plugin restore code.
549 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
550 and do not strip paths on symbolic links.
551 kes Set catalog backup database and user name from values specified on
552 the ./configure line.
553 ebl Fix #1031 about wrong pool source information in job report.
556 kes Remove a redundant jcr argument to find_files, match_files, and
558 kes Implement '.status dir header|scheduled|running|terminated' that
559 prints the requested status section. With the exception of the
560 header, the other reports have fields separated by tabs (\t).
562 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
563 a resource embedded run command to find a since time if no explicit
564 since time was supplied on the command line.
565 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
566 that updates the state file at job termination time in addition to
567 when the daemon terminates.
569 kes First version where a plugin did a backup.
570 bpipe-fd.so created a backup file, wrote a test
571 string to it, and Bacua could restore this fabricated file.
573 kes Implement DB Driver = string for the DBI driver.
574 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
575 kes First cut of code for loading Win32 plugin dlls. Implement
576 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
577 and implement a dlfcn.h file based on opengroup's definitions of
580 kes First cut plugin directives.
582 kes Apply patch from bug #1049 to prevent stripping the path on a
584 kes Attempt to fix bug #1047 where stripping a path corrupts the
585 heap. Waiting for feedback.
586 kes Correct the Mount message not to suggest labeling a new tape
587 when doing a restore. Submitted by email by John Stoffel.
588 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
589 FD by using casting. Reported in bug #1042.
591 kes A bit of crypto cleanup. More later.
593 Release Version 2.2.8
595 kes Apply patch from Martin to correct bug #1040, bscan sets existing
597 kes Fixed important spelling error in doc -- bug #1045.
599 ebl Fix bextract to be able to extract non-portable Win32 data to
601 kes Move initialization of read/write res lock earlier in the code.
602 This fixes the crash with a null conf file. This fixes bug
604 kes Redefine CURES in lib/parse_conf to be URES and move it all
605 into lib/parse_conf.c -- this responds to bug #1042, but does
606 not fix it. The fix is not to compile with FORTIFY_SOURCE.
607 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
608 the trunk SVN. I don't think this was reported as a bug.
610 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
612 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
614 kes Add DataDespooling and DataCommitting status (committing is
615 the last despooling).
616 kes Finish implementation of new reservations code noted below.
618 kes Fix bsnprintf for float point numbers. I broke recently when
619 parameterizing some variables. This fixes bug #1036.
620 kes Undo recent reservations changes ... will apply them later
621 when they work better.
623 ebl Fixes #1034 which cause mysql to hang the connection after 8h
624 ebl Change default statistics target of filename.name and path.path
625 fields for PostgreSQL. This speeds lookup by indexes. Thanks
627 kes A few more tweaks to new reservation code. Make sure to clear
628 vol released flag when retaking volume. When reading label and
629 label is bad mark volume unused. When recycling, mark volume
630 unused so it can be renamed.
632 kes Fix reserve_volume() so it doesn't release a volume in use
633 (i.e. a volume entry not marked released). This should be
634 the last part needed to fix bug #1018.
636 kes Move Heartbeat documentation from Job to Director resource.
637 This fixes bug #1033.
639 kes Fix existing switch drive SD code to call autochanger to release
640 any old volume. This must be done to keep the autochanger from
641 releasing subsequently newly reserved volumes in doing a close().
642 This should fix bug #1018.
643 kes Fail if attempting to get console input in batch mode. This
644 should help fail RunScript console commands that are incomplete.
645 kes First cut implementing switch_drive() in SD (not actually called).
647 kes Implement first cut running console commands in a RunScript.
649 ebl Fixes bug #1028 where 'Selection Type' option was not usable
651 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
654 Release Version 2.2.7
656 kes Add new free_tls() entry point so that Win32 builds.
657 kes Fix compile warning in src/lib/util.c
658 kes Fix entry point for edit_job_codes() so that Win32 builds.
659 kes Fix seg fault Frank Sweetser reports in regression testing
660 on his systems. The problem was that the original author of
661 bsnprintf.c did not take into account the side effects of
662 using ++x in the argument to a #define.
663 kes Make SD protocol backward compatible with version 2.2.x.
665 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
666 because Bacula no longer restores sockets.
667 ebl Always use ignorecase fileset option on win32 FD.
669 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
670 that implements double quoting include names in conf files,
671 and also allows piping input by having the first character
672 be a vertical bar (|).
673 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
674 that implement %f in RunScripts to pass the FileSet name.
675 kes Skip leading | when lex input comes from a pipe as suggested
676 by Michael Stapelberg <michael@stapelberg.de>.
678 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
679 Nerijus Baliunas <nerijus@users.sourceforge.net>
681 kes Implement Plugin Directory and plugin events.
683 kes Implement a security enhancement: TLS authentication but no
684 encryption. Enabled by setting 'TLS Authentication = yes'.
685 Note when this is on, TLS encryption is turned OFF!
687 kes This patch corrects a problem where the maximum concurrent storage
688 jobs counter gets out of sync during restore jobs causing jobs to
689 'wait on max Storage jobs'. This patch fixes bug #1009.
691 kes This patch fixes bcopy so that it produces correct Volumes.
693 kes This patch eliminates spurious output to the console during a VerifyVolume
694 job that contains encrypted data. It fixes bug #1024.
696 kes This patch prevents the 'status dir' command from trying to use a scratch
697 volume and possibly moving it from one pool to another. This patch fixes
700 kes Add new include to postgresql.c suggested by Marc Cousins so
701 that it compiles correctly with pgre version 8.3.
703 kes Fix --archivedir addition to configure. Replace it with
704 --with-archivedir in configure.in This fixes the regression
706 kes This patch fixes bug #1012 where the job is canceled because
707 of Max Run Time exceeded when the job has not yet started.
709 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
710 one 'part' to write. Instead of each part being stored on disk,
711 written to DVD, then deleted from disk, all parts are written to disk,
712 and only the last is written and deleted from disk.
713 kes This patch fixes the status command to include the formating string for
714 JS_AttrInsterting. It fixes bug #1021.
715 kes This patch should fix the Mac OS X build problem on the latest
716 Darwin, where sys/types.h was not included correctly (apparently
717 due to a change in the Mac headers). The solution was to explicitly
718 ensure that it is defined for the ./configure.
719 This patch also has a rebuild of configure that includes the Debian
720 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
721 kes This patch should ensure that queued messages to the console are
722 displayed as soon as possible. It should fix bug 1007, but has been
723 reported not to work.
725 kes This patch fixes the infinite loop when trying to increase the
726 maximum number of volumes in a Pool during the add command.
727 This patch fixes bug #1008.
729 Release Version 2.2.6
731 db Remove extra data on estimate command in joblist for bat.
733 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
734 really change anything, but is the beginning of doing it *right*.
735 To do it completely right the LastWritten date must be passed to
736 the SD, but it is not yet done.
737 kes Minor tweaks to some bat restore SQL.
738 kes This patch fixes bug #1003 where putting the message output from
739 a Verify job into the catalog results in a recursive loop. The problem
740 seems to show up only with postgresql (to be verified).
741 kes Correct %x to %p in postgresql debug statement.
743 kes Fix bug #942 where lots of emails where generated when the heartbeat
744 interval was low and Bacula wanted a different tape from the one in
747 ebl Add new SD despooling attributes and Dir inserting attributes
748 job status codes in the catalog (Status table).
750 ebl Use qmake-qt4 instead of qmake when available (debian system).
752 kes Add a security warning to src/cats/make_catalog_backup.in indicating
753 that passing the password via the command line (arg 3) is insecure.
754 This responds to bug #990 (it doesn't fix it).
756 kes Set default debug_level to zero. This corrects bugs #991 and #993.
757 kes Fix a crash in bat when it cannot connect to the Director for example
758 if the Director is not running.
759 kes Remove redundant INDEX (JobId) from File table in the trunk.
761 kes Make explicit exception to GPL in LICENSE to permit linking
762 the Win32 FD with Microsoft VSS code.
763 kes Apply the Solaris package patch from
764 Masopust, Christian <christian.masopust@siemens.com>
765 kes Apply the patch to optionally add a timestamp in the debug output
766 submitted by Mariusz Czulada <manieq@wp.eu>.
768 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
769 backend (sql_strerror). Fixes bug #989
771 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
772 It applied with no problems.
773 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
775 kes Redirect stderror to stdin on mt status command in mtx-changer.in
776 since the status is returned on stderr on Solaris.
777 kes Activate Close button on tray-monitor window. This fixes
779 kes Check for NULL item in parse_conf.c before calling it. In the
780 case of Device, there is no item and this caused a seg fault when
781 Device appears in the conf file.
782 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
783 avoids pulling in config.h multiple times in some new code.
785 kes Fix spurious warning message printed when creating a volume with
786 a LabelFormat. This fixes bug #976.
788 Release Version 2.2.5
790 kes Add JobId in place of Job name in all the Jmsg() output.
791 kes Correct the APP_DESC for the Win32 storage service (remove an e).
793 kes Make maxvol-test and new more strict maxvol2-test work.
794 kes Print JobId in all Jmsg() job output.
796 kes Add new SD despooling attributes and Dir inserting attributes
797 job status codes. This fixes bug 961.
798 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
800 kes Fix doc issue. This fixes bug #963.
801 kes Fix listing performance problems in bat. Pointed out by
803 kes Remove old debug code.
804 kes Fix bat code that tests for Win32. This should fix bug #968
805 kes Query 5 list wrong Vol after migration. This fixes bug #960
807 ebl Fix #969 where user can't change Replace option in restore menu.
809 kes Save jcr in thread specific data (tsd) for each thread.
810 kes Make Dmsg() print JobId as -%u.
811 kes Make Jmsg, Emsg, and others automatically pickup the jobid
812 for the thread if it exists.
813 kes Remove old reservation debug jid code.
814 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
815 ebl Add an option that permit to specify spool size in job
816 definition. (Applying patches/testing/spoolsize_per_job.patch).
817 You must upgrade SD and DIR at the same time.
818 dvl Add new configuration item --archivedir
819 dvl Adjust regression tests to use tmp not /tmp. This will allow
820 multiple concurrent runs of the regression tests.
822 kes Fix race condition that drops final block written to volume.
823 This happens in rare cases with multiple simultaneous jobs
824 when the Volume fills. This fixes bug #964. May be related
825 to bug #935 and possibly #903.
826 kes Eliminate more strerror() and replace with bstrerror().
827 kes Remove BSD getopt and replace with unrestricted IBM version.
828 kes Fix Win32 build for changed calling sequences.
829 kes More tweaks to the mount volume routines to get everything
830 right. Changed variable name from find to have_vol, which is
831 much easier to understand.
832 kes Enhance btimer debug code.
834 kes Fix FD->SD authorization failure, which was due to spurious
835 wakeups from a pthread_cond_timedwait(). Simply check the
836 predicate before continuing. This fixes bug #953.
837 kes Add const char where needed (more to do). Remove temp debug code.
839 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
840 kes Don't overwrite error message in check_tables_version.
842 kes Unlock batch insert tables with same calls used elsewhere.
843 kes Allow starting 59 jobs a second.
844 kes Make SD session key more random.
845 kes Add retry for SQLite opening db if it fails. Probably helps
847 kes Suppress extra error messages during batch insert failure.
849 kes Add jcr to timer packets so if killed message can be sent to job.
850 kes Add JobId to all Dmsg() output.
851 kes Put some FD auth code on dbglvl rather than fixed.
852 kes Return insert attributes error message in db msg buffer to avoid
853 false error messages. Helps fix bug #966.
854 kes Separate batch init error messages. Probably helps fix bug #966.
855 kes Make SD code that contructs attribute insert check string lengths
857 kes If Dir gets an error during inserting attributes, cancel SD.
858 This reduces unnecessary error messages.
860 kes Correct search boolean for getting Volume info
861 ebl Cleanup batch insert code. Probably fixes bug #965.
862 kes Back out one small change to the reservation system (reserving a volume).
863 kes Rework how a Volume is mounted. It is now much more intelligent and
864 will always attempt to use any mounted volume if possible and reduces
865 calls to the Director asking about volumes.
867 kes Turn off some code when batch insert not enabled.
868 kes Edit FD name in connect error messages.
869 kes Rework the reservation system to take into account that the Director
870 might give us a Volume that is different from the current one being
871 used, and to ensure that we don't exceed Maximum Volume Jobs.
872 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
873 fatal error with multiple jobs running'
874 kes Add more debug code in reservation system.
875 kes Implement maxvol-test to check bug #947.
877 kes Add code to handle tray monitor separated from Win32 FD.
878 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
880 kes Add missed return in fixing verify bug -- trunk only.
881 ebl Fix a command parser issue causing a director segfault.
882 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
884 kes Increase the max block size to 4MB fixes bug #957.
885 kes ERABT if user sets min block size > max block size. Fixes bug #956.
886 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
887 is not properly mounted (recognized) during a poll.
888 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
889 Job that has differences reports Verify OK.
890 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
892 ebl Add an option to operate on all pools with update vol parameters.
893 This complete the project 20. Patch from Nigel Stepp.
894 ebl Add history support to bconsole when using readline.
895 Using Ctrl-D to exit doesn't update .bconsole_history
896 kes Modify new volume algorithm to use max MediaId for generating next
897 volume number rather than the count of Volumes. This should essentially
898 eliminate the failure rate if some volumes were deleted. Bug #921.
899 kes Begin implemention of Optimize Job Scheduling.
900 kes Implement restore callback that Dirk and I agreed on for bat
901 restore. This fixes bug #928. Restore of backup of zero files fails.
902 kes Fix SQL Catalog logging which broke with new db_escape_string
905 Release Version 2.2.4
907 kes Fix bacula_cats.def for new db_escape_string().
908 kes Increase size of name string when FD making connection to SD.
909 May fix bug #953. FD->SD connection failure.
911 kes Add code to help Dan debug 2drive-incremental-2disk test.
912 kes Add code to try to fix bug #908.
913 kes Add waits to multiple exit detection code to try to force pid
914 file to always be deleted.
915 kes Restore good dev.tar.gz to rescue set appropriate binary property.
917 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
918 trying to switch drives by checking for blocking before unblocking.
920 kes Cancel storage daemon in all cases where FD reports error. This
921 should fix virtually all cases of bug #920.
922 kes Fix db_escape_string() for MySQL which did not compile.
924 kes Fix error message that was clobbered when Dir tells SD it does not
925 have write permission on Volume. This should fix a minor point
926 in bug #942, but not the main problem.
927 kes Add code to cancel job in SD if FD connection fails. This should
929 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
930 dvl Pass jcr and db into db_escape_string() to enable better escaping
932 kes Fix migration code to get correct Volume name with multiple volumes
933 by skipping |. Fixes bug #936.
934 kes Implement patch supplied by Landon to fix bug #944 where using
935 TLS with bconsole uses 99+% of the CPU.
936 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
938 kes Move patches into patches directory.
940 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
943 ebl Using 'm' in bconsole will show messages like before,
944 and not memory usage.
945 kes Fix bug #935, and probably also bug #903 where files were not
946 restored. MediaId was not properly set in JobMedia record after
949 kes Suppress chown and chmod error messages if the FD is not running
952 kes Apply Martin Simmons' patch that should turn off the new API usage
953 when batch insert is turned off allowing building on older
955 kes Add ./configure search in qwt-qt4 for qwt package
957 kes Bacula is now free of 3rd party GPL copyrighted code!
959 kes Add guid_to_name.c/h which replace idcache.
960 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
962 ebl Detect if new PosgreSQL batch insert API is present.
963 kes Correct incorrect mempool call causing Director crash. Occurs on
964 systems without va_copy().
965 sb Update spec files for 2.2.1 release
967 kes Fix memory pool call in ua_output.c. bug #934.
968 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
969 Add test program to fnmatch.c
971 kes Integrate patch to README.vc8 from
972 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
973 edit it to get it into Unix patch format.
974 kes Implement mkpath.c to replace old FSF makepath.c
976 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
978 Release Version 2.2.1
980 kes Update POTFILES.in
981 kes Cleanup a few underquoted AC_DEFUNs in configure
982 kes Apply patch from Martin Simmons that adds a test for va_copy to
985 kes Fix bug #921 by increasing the number of tries to create a new volume
987 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
988 can be called multiple times. Implement a version for machines
989 without va_copy() that gets a big buffer.
991 kes Integrate more portable zone offset code into bsmtp.c
992 Submitted by Attila Fülöp.
994 kes Fix bad SD->FD return status reported by
995 (James Harper) <james.harper@bendigoit.com.au>
996 ebl Fix a bug in read_close_session which return random status
997 thanks to James Harper
999 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1000 and directory names during restore of single file/directories.
1001 kes Add sanity checks to .sql command when string is empty. Hopefully
1002 that will resolve Dirks Director crash.
1004 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1005 in the bsmtp chat subroutine when debug is >= 10.
1007 kes Fix Director crash when running bat SQL queries.
1008 kes Add David's notes on Item 8: Copy pools.
1010 kes Rework projects file to be current and ready for a vote.
1011 kes Enhance lex scanner error message.
1013 kes Tweak LICENSE file to mention BSD code.
1014 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1015 if specified on the ./configure.
1016 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1017 This class is intended to allow us to open a second bsock to the
1018 Director while in the restore subdialog.
1020 kes Fix configure to create bat Makefile before creating dependencies.
1021 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1022 kes Add a tooltip to the tray monitor.
1023 dvl Set the Director's PID file before dropping privs. This fixes
1026 kes Update AUTHORs file
1027 kes Increase the default max concurrent jobs to 20 in FD and SD to
1028 correspond with the default .conf files.
1029 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1030 some different, of the same file created by RN when porting the
1032 kes Rearrange some of the Win32 directories and the placement of the files
1034 kes Set DEVELOPER flag in version.h
1036 ========================================================================
1037 Release Version 2.2.0
1039 kes Apply a second doc patch from Marc.
1040 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1041 improves the tips section that discusses how to setup multiple
1044 kes Update bat README file.
1045 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1046 corrects a typo in the Recycle status check in db_find_next_volume().
1047 This will probably fix a number of annoying problems with multiple
1049 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1050 bnet calls -- no functionality change.
1052 kes Modify the Verify output to specify if files are missing on
1053 the Volume(s) or disk. Fixes confusion in bug #916.
1054 kes When more than one Volume is read in a migration job, the last
1055 Volume bytes reported are from the last read volume rather than
1056 the last written volume. Fixed. This fixes bug #910.
1057 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1058 It previously printed New Recyle flag is: no. This fixes bug
1061 kes Correct seg fault when switching tape drives during restore.
1062 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1063 be used until after 2.2.0 release.
1065 kes Remove fnmatch() in SD that permitted wild card specifications.
1066 This fixes bug #914.
1068 kes Fix %g in filename returned by SQL for browse tree reported by
1070 kes Fix configure so that it puts config.out in the cwd rather than
1072 kes Attempt to fix the locking problem reported by Eric in bug #906.
1073 kes Make berrno class to leave errno unchanged after constructor call.
1074 kes Make bnet_server use the heap rather than the stack to allocate
1075 its socket fd pointers to avoid a crash at termination. Problem
1076 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1078 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1079 and putting it in depkgs-qt along with Qt4.3.
1081 kes Rework code in acquire.c that switches drives for reading when
1082 the Media Type does not match. This should fix bug #906
1084 ebl Fix a director segfault during job setup #907
1085 kes Correct seg fault in postgresql when first operation returns no
1086 rows. Fixes Dirks File browser problem seg fault with bat.
1088 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1089 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1092 kes Implement PopUp YES/NO dialog for bat.
1094 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1096 kes Correct RunScript to terminate job in FD on failure.
1097 kes Change abort_on_error and AbortJobOnError to fail_on_error
1098 and FailJobOnError in RunScripts.
1099 kes Minor tweaks of code formating in RunScripts, principally to
1100 avoid depassing 80 columns.
1102 kes Eliminate one #ifdef Win32 in bsmtp
1103 kes Implement grow tool to grow a file for testing very large databases.
1104 kes Add big-vol-test to test Bacula seeking with > 5GB.
1107 kes Modify find_next_volume() to return all values in Media record.
1108 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1112 kes Update Release notes
1114 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1115 Warning, in previous beta version, all media get from scratch keep their
1118 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1119 This should fix bug #842. Made a note to look at removing the temp
1120 files at the end of the install.
1121 kes Add ability to mount and unmount a file device providing it is
1122 marked as being removable and has the appropriate mount and unmount
1123 commands defined in the Device resource. This fixes bug #830.
1124 kes When applying a storage override, release all previous storage
1125 definitions rather than just prepending the new storage.
1126 This should prevent a good deal of confusion.
1128 kes Implement ./configure search for qwt libraries.
1130 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1131 Win32 FD. This should fix bug #893.
1132 kes Remove an unnecessary beep in Win32 init code.
1133 kes Update copyright dates in Win32 executable about boxes.
1134 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1135 code with a BSD getopt.c and getopt.h.
1136 kes Remove sched.h from the Win32 compat directory -- not used.
1137 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1138 need to shut it down, do it through the services panel or the command
1140 kes Remove some inappropriate Bacula FSFE copyrights.
1141 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1142 kes Fix regress config non-portable test as pointed out by
1143 Florian Heigl <florian.heigl@gmail.com>
1144 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1145 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1147 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1148 Reported by Frank Sweetser.
1152 kes Fix client-only build.
1153 kes Integrate client-only fixes for bsys (initgroups) and conio from
1154 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1155 kes Make arguments to get_scratch_volume() in same order as other
1157 kes Rework the prune_volumes() subroutine so that after purging and
1158 no volume found in desired pool, it will check for a scratch
1159 volume. This prevents recycling the whole scratch pool.
1160 kes Add code to status storage to print boffset_t (largefile support).
1162 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1163 kes You now need a --with-qwt=<dir> to be able to build bat.
1164 kes Update src/win32/cats/bacula_cats.def to include the new
1165 db_get_query_dbids() call on Win32.
1167 kes Correct a problem when selecting a scratch volume and moving
1168 it to another pool that lost some columns.
1169 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1170 kes Enhance Autochanger error messages to include Volume and device name.
1171 kes Rework prune_volumes() code to take account of InChanger flag,
1172 and to handle recycling volumes going to the Scratch pool and
1173 current pool because the RecyclePool directive.
1174 kes Implement a better and more efficient db_get_query_dbids() to
1175 handle creating and passing back a list of DBIds.
1179 kes Start work on new more efficient DBId subroutine. First use
1180 will be for recycling volume to Scratch inchanger.
1181 kes Increase number of JobIds in pruning from 1000 to 10000.
1182 This to be replaced by above routine.
1183 kes Begin implementation of building Qt4 on Win32.
1184 kes Correct typo in fix I added for bad TLS shutdown.
1185 kes Pull 2.0.3 patches into patches directory.
1186 kes Update Release notes. Include qt-console in line count.
1187 kes Update Projects file.
1189 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1190 bug in migration code where a job that spanned two volumes
1193 kes Implement new BST_DESPOOLING blocked state. Change from locking
1194 during despooling in SD to blocking. This means that other threads
1195 can work with the device structure, in particular the reservations
1196 system while despooling.
1198 kes Fix return in reservation message queue that missed clearing
1199 the jcr lock (implemented 26Jun07 below).
1200 kes Rename a number of dev methods to make locking function names
1202 kes Document locking in lock.c. Move lock structures to new file
1205 kes Move reservations message lock to lock jcr only this
1207 kes Move main SD locking code into lock.c (new file).
1208 kes Update Win32 build to include lock.c
1212 kes Dirk committed the qwt library code for drawing graphs in bat.
1213 kes Tweak install of qwt so that it is integrated with ./configure.
1215 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1216 out by Eric (my typo).
1217 ebl Fix configure.in to get batch mode enable
1218 kes Return correct string from authenticate.cpp in bat when connecting
1220 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1221 spurious line drops when using TLS.
1222 kes Do not file reparse points when restoring a file that already
1225 kes Implement Windows reparse points -- similar to directories, but
1226 we do not descend into it. This is a first cut. They seem to
1227 be backed up, but restore is not yet tested.
1228 kes Remove restore_blocking in tls code when shutting a socket to leave
1229 it in blocking mode. Hopefully this will fix the encryption bug
1230 reported by Frank Sweetser.
1231 kes When opening a file for backup, tell the OS that we are going to
1232 read it sequentially -- optimization.
1233 kes Change variable names in authenticate_director() to not conflict
1234 with member names in bat. Caused great confusion with compiler,
1237 kes Queue openssl error messages in case of comm problem.
1238 kes Do shutdown() call if socket terminated.
1239 kes Remove some duplicated code in tls.c
1240 kes Move more of the bsock member variables into private and access
1242 kes Add Frank Sweetser's tls-test to the regression suite.
1244 kes Add Swedish sv.po file
1246 kes Don't print clock skew message in FD if less than 3 seconds diff.
1247 kes Add a bit of VSS info to status client.
1248 kes Implement a first cut of Vista VSS, using Win2003 code.
1250 Release: 2.1.20 beta
1252 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1253 loaded tape but uses first drive).
1254 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1255 This was indeed a Win32 issue.
1257 kes Simplify search of autochanger for in-use Volume.
1258 kes Fix exit condition of check for in-use volume. kes Remove
1259 inappropriate my_postgresql_free_result() in db_close()
1261 kes Fix bad return in FD when encryption signature not found.
1262 Probably caused a crash.
1263 kes Inhibit missing encryption signature error messages for
1264 file types where no signature computed.
1265 kes Correct inverted check on autochanger in reservation system.
1266 kes Tweak debug code in autochanger reservation.
1268 kes Add some additional locking in the cats directory in subroutines
1269 that modify packet variables called from batch insert.
1270 kes Rework how dcrs are allocated. new_dcr() can now be called
1271 with an existing pointer, and it will simply clean it up.
1272 This allows the reservation system to test various different
1273 devices, and will permit easy device changes.
1274 kes A bunch of changes all over to handle new new_dcr() calling
1276 kes Work more on the Volume management in the SD. Remember Volumes
1277 for tape drives and for autochangers (even virtual disk changers).
1278 kes When looking at the Volume list to reserve a drive, handle
1279 autochanger names correctly by interating through the changer
1280 devices. Also call the Director to see if a Volume is suitable
1281 for the current job.
1282 kes Fix some bugs in bscan. Make sure all media records are written.
1283 Make sure that valid JobMedia records are written for disk files.
1284 Previously they were completely wrong.
1285 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1286 that the URLs don't change and so that the developers will all
1287 work off the same copy. Rebuild from scrach.
1288 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1290 Release: 2.1.18 beta
1292 kes Fix seg fault in FD from incorrect digest size.
1293 kes Fix argument to non-OpenSSL crypto.c subroutine.
1295 Release: 2.1.16 beta
1297 kes Remove a few malloc()s from the encryption code.
1298 kes Use the class calls to bsock in filed/backup.c and restore.c in
1299 place of the old bnet_xxx code.
1300 kes Implement code that does an on the fly calculation of the
1301 signing digest during restore of encrypted files. It makes
1302 a best guess at the algorithm, and if it is not correct, will
1303 then revert to the old code which reads the file after it is
1305 kes Implement at least one missing crypto stream in stream_to_ascii()
1306 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1307 #877 where a reload with bad syntax causes Dir to exit.
1309 Cut: 2.1.14 beta (not released)
1311 kes Do not free a volume on a tape drive until another volume is
1312 mounted and read, or the autochanger unloads the volume.
1313 This should help the SD re-use volumes that are already mounted,
1314 and should fix bug #886.
1315 kes Apply patch from user brettedgar that allows gnome2-console include
1316 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1317 kes Apply patch from Lucien Weller that fixes day of week calculation
1318 because of DST flag problem. Fixes bug #887.
1320 kes Move find_next_appendable_volume() to after acquiring a valid device
1321 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1323 kes Unable to reproduce bug 872. However added additional testing for
1325 kes Bug #874 resolved by documenting SQLite limitations.
1326 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1327 kes Bug #881 resolved by removing typo in mtx-changer script.
1328 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1329 approval. Added a link to the wiki on the web page, and implemented
1330 a backup from http://paramount.ind.wpi.edu
1332 kes Fix update allfrompool to pass pool name.
1334 kes Convert to pure GPL v2 license.
1335 kes Fix sscanf problems reported by Peter Buschman that caused
1336 a bus error on Solaris.
1337 kes Rework (simplify) the select prompt in bat.
1338 kes Move get_jobid_from_tid() into lib and create a
1340 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1341 should definitely fix the problem of lost error messages in the
1343 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1344 kes Eliminate tcpd.h from the project. Enclose the #include from the
1345 library with extern C ...
1346 kes Add print of signal name when a signal is trapped.
1348 Release: 2.1.12 beta
1350 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1352 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1353 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1354 makes SQLit3 run 30 times faster, though a bit less safe.
1355 kes Implement --with-batch-insert in configure and detection of thread
1356 safe libraries. It is on by default, but turned off if no thread
1357 safe library (e.g. SQLite 2) is available.
1359 kes Fix Bacula PostgreSQL buffer overruns.
1360 kes Do better checking for NULL results returned from PostgreSQL;
1361 implement retry for failed queries; clear results buffer after
1362 failed query. Hopefully this will correct the PostgreSQL failures.
1364 kes Implement algorithm to handle only one appendable volume with
1365 Prefer Mounted Volumes = no.
1366 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1367 returned from a query.
1368 kes Make volume lock recursive.
1369 kes Implement an additional volume reservation algorithm that
1370 starts by considering all reserved volumes then uses the
1371 old brute force algorithm of searching the resources to
1372 find a suitable device.
1373 kes Add new reservations debug code and refine the old code.
1374 kes Update the win32/dll/bacula.defs file.
1376 kes Tweak reservations algorithm to permit a few more cases, i.e.
1377 volume reserved, but on different drive, ...
1378 kes Enhance SD status to include Pool and Media Type for drive in a
1379 more readable format (a bit longer).
1380 kes Fix PostgreSQL double free.
1382 kes Minor refactoring of restore decryption code.
1383 kes Add code to smartall.c to detect double free of a buffer.
1385 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1386 so that bsmtp will create a correct email address (mailbox only).
1387 kes Modify 'memory' command so that the buffers are listed as 'In use'
1388 to avoid confusion with Orphaned buffers.
1389 kes I reworked the OpenSSL include/lib flags to be handled in
1390 the standard Bacula way, which should fix bug #863 concerning
1391 non-standard OpenSSL libraries.
1393 kes Implement Help Browser window for bat.
1394 kes Fix reload bug that reset StorageId to zero.
1396 kes Fix TLS #ifdefing when TLS turned off.
1397 kes Ensure that when labelling a tape with Slot=0 that InChanger
1399 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1401 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1402 add DISTINCT (required by PostgreSQL).
1403 kes Implement BSOCK authenticate_director() method. Eventually will
1404 authenicate all daemons.
1405 kes Move several more functions into the BSOCK class.
1407 kes Add code to tell the OS that we no longer need a cached
1408 file that we were reading. In findlib/bfile.c. Also,
1409 only cache files that we are reading. Thanks to
1410 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1411 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1412 kes Implement script to automatically generate cats and dll .def
1413 files for Win32 dll.
1414 kes Update README.mingw32 to include new .def file generation.
1415 kes Correct typo in UTF-8 error message as reported by:
1416 jhernandez <julianhernandez@gmail.com>
1417 kes Add additional sm_check() code on debug level 1.
1418 kes Set default debug level to 1.
1419 kes Trap SIGABRT in attempt to get traceback.
1421 kes Reduce bat connect timeout from 30 to 15 seconds.
1422 kes More restructuring and implementing BSOCK class in place of
1424 kes Remove a few unnecessary malloc() tests in crypto code.
1425 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1426 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1427 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1429 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1431 kes Fix Verify InitCatalog. The attributes were not pointing to the
1432 correct saved location.
1433 kes Implement message callback so that GUI is sure to get all
1434 daemon messages. Currently displayed in a dialog in bat.
1435 kes Ignore SIGUSR2 (Bacula timer) in bat.
1436 kes Apply regress patch from bug #859 to allow regress to work
1437 with Solaris compiler.
1439 kes Begin adding TLS support to bat.
1440 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1441 clean up lex.c and make it more readable.
1443 kes Move more bnet functions into the BSOCK class.
1444 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1445 kes Complete change of berrno strerror() method to bstrerror()
1447 Release: 2.1.10 beta
1449 kes Cleanup incorrect email addresses in bsmtp.
1450 kes Make bat display initial messages rather than discard them.
1452 kes First cut of adding .mod to the run command.
1453 kes Implement auto display of messages in bat.
1454 kes Enhanced preferences to allow all Bacula output to be
1457 kes Try to make bsmtp date routines more generic.
1458 kes Fixed bug #856 autochanger documentation.
1459 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1460 kes Add new cats entry point so Win32 builds.
1462 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1464 kes Do better checking for the MySQL 64 bit libraries looking for both
1465 .a and .so libraries.
1466 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1467 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1468 kes Require the thread safe version of MySQL during configure. Thanks
1469 to Andre Noll for pointing this out.
1470 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1471 continuing in migration code.
1472 kes Apply implementation of tray-monitor font derived from gnome-console
1473 submitted by Andreas Piesk <a.piesk@gmx.net>
1475 kes Eliminate important memory loss in SQLite
1476 kes Fixed the batch insert MySQL thread specific data that was not
1477 being freed. See cats/mysql.c:db_thread_cleanup().
1478 kes Fix restore before command.
1479 kes Convert old hdr.name to name() in a few places.
1480 kes Implement update jobid command.
1481 kes Return all time_t dates in db_get_job_record()
1482 kes Stop watchdog in SD earlier.
1483 kes Put Pool just after Storage in please mount message.
1484 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1487 kes Update the po files.
1488 kes Fix Verify InitCatalog by making it cache attributes.
1490 kes Change name bacula-bat to bat for man 1 page to correspond to
1492 kes Check for client and store NULL pointers in status command. This
1494 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1495 kes Fix sign extended editing of %p.
1496 kes Clean out a little old #ifdefing in cats/mysql.c
1498 kes If time diff between DIR and FD is more than 600 seconds convert
1499 INFO message to WARNING.
1500 kes Implement heap size display in status for all daemons.
1501 kes Attempt to fix MySQL db open memory loss (not successfull).
1502 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1503 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1504 Query. This looks like a MySQL but but by doing extra releases,
1505 the memory goes away. This should fix bug #847.
1507 kes When backup fails, cancel SD before waiting for sd termination.
1508 kes If SD is waiting for FD to connect during cancel, wake up the
1510 kes Fix fsf code so that errno is correctly reported.
1511 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1513 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1514 so that Bacula doesn't later stumble into a seg fault.
1515 kes Use the term Restore Client in the restore Job report.
1516 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1517 the original job's FileSetId.
1518 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1519 spooling in migration jobs. Not yet tested.
1520 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1521 reading conf file from a pipe. However, do it with open_bpipe()
1522 rather than popen. Not yet tested.
1524 kes Fix an ugly bug where the VolCatBytes were getting updated
1526 kes Implement bconsole memory command that prints current memory
1527 usage, plus smartalloc dump.
1528 kes Clarify some error messages in backup, admin, and migrate.
1529 kes Shrink label dialog to smaller size.
1530 kes Invert Cancel OK buttons on restore to be OK Cancel.
1531 kes More strerror() to bstrerror() conversions.
1533 kes Start implementing bstrerror() in place of strerror().
1534 kes Stripping path -- seems to work.
1536 kes Prevent door and port files from being restored (mostly
1538 kes Free an unreleased buffer in compat code.
1539 kes Change console Job name from *Console* to -Console- to eliminate
1540 Win32 filename problems. Put Win32 path separator when creating
1541 Console file. This fixes bug #846.
1542 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1544 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1546 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1547 to force Win32 error message.
1549 kes First cut strip path. The data should be passed to the FD,
1550 but nothing is done with it yet.
1551 kes Enhance the digest and signature routines in the crypto
1552 library to accept a JCR and to use it to print error messages
1553 so that they will go in the Job report rather than the daemon's
1555 kes Simplify some of the verify signature code.
1556 kes Simplify a few of the alternative returns in the signature
1559 ebl Use only POSIX regex instead of GNU regex in breg.c for
1560 File relocation. It fix broken freebsd compilation.
1561 kes Convert all other Dir files to use new ua class message
1563 kes Tentative fix for missing digest signature in bug 807.
1564 kes Correct handle problem in new win32_ftruncate routine.
1565 kes Convert ua_purge.c and ua_update.c to use new ua class
1566 message routines for bat.
1568 kes Correct incorrect installation of LICENSE in Win32 installer.
1569 kes Display LICENSE at the beginning of the Win32 install.
1570 kes Attempt to correct the need for the png files to be installed
1572 kes Reapply my bat.conf install script in qt-console. I think I
1573 editted bat.pro instead of bat.pro.in and it was lost.
1574 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1575 the /var/lock/subsys for subsysdir. Also corrects typos in the
1578 kes First cut update job.
1579 kes Correct configure to include qmake of src/qt-console directory.
1581 kes Make restore job yes/mod/no print in one command so GUI works.
1582 kes First cut implementing backup and restore client.
1583 kes Correct editing in Verify output that caused a seg fault.
1585 kes Insure that bat.conf is not overwritten during installation.
1586 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1587 while I was implementing migration in March 2006 !
1589 ebl Cleanup file relocation, using char *RegexWhere instead of
1590 char *where + bool where_use_regexp
1591 kes Update some manpages and add bat manpage.
1592 kes Make a first cut at converting bacula.spec.in for bwx-console
1594 kes Apply patch from John Goerzen to add hostname as fourth argument
1595 to make_catalog_backup script.
1596 kes Fix typos I introduced into bsmtp.c
1597 kes Make pm_strxxx() routines handle input of NULL pointer. This
1598 is to protect from NULL pointers returned from SQL databases.
1599 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1600 kes Add more debug to FIFO code -- fix fifo regression test.
1602 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1603 kes Add thread timer to bnet_connect() to break from OS if wait time
1606 kes Update Win32 build to include new files, new symbols, and
1608 kes Implement socket level heartbeat (tcp_keepidle)
1609 ebl Commit File relocation patch
1610 kes Make bat have 'make install' target.
1611 kes Warn during install if old gnome-console binary found.
1612 kes Warn during install if old wx-console binary found.
1613 kes Add -8 option to bsmtp command line to add content type utf-8.
1614 Fixes bug #809. (Character coding problem in bsmtp).
1615 kes If < is found in target (from, to, cc) then do not enclose the
1616 target in < > in bsmtp. Fixes bug #772 (malformed address).
1617 kes When printing certain items in dbcheck, stop after 300000.
1618 Fixes bug #822. (dbcheck loops).
1619 kes Incorrect status in Dir after waiting for mount with poll set.
1622 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1624 kes Print waiting to reserve a device every 5 mins.
1626 kes Don't call close_part in label.c if tape and relabel.
1627 kes Don't free volume if busy in close() -- should help with
1629 ebl Fix #824 RunScript bug (After script could be execute twice)
1630 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1631 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1632 Add a regression script to test RunScript
1634 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1637 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1638 deprecated. No additional bugs will be fixed, and they will be dropped
1639 in a future release (probably 2.4.0).
1640 kes Change name of wx-console to bwx-console to make it more Bacula
1642 kes Change the name of gnome-console to bgnome-console to make it
1645 kes Some time in March, a Feature Request with patch from Jorj Bauer
1646 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1648 The ability for the director to validate a Client (FD) CN against
1649 an arbitrary set of patterns rather than the hostname, with
1650 A new 'TLS Allowed CN' set of directives which are implemented
1651 in the Client resource. Then pattern matching is used in place
1652 of hostname matching against the Certificate's CN. As an example, we
1653 have certificates which (a) use a local CA, and (b) have a CN of the
1655 kes Add new/changed entry points to Win32 build
1656 kes Create unaccepted-projects for projects that are not accepted.
1657 kes Simplify locking in the reservations system.
1658 kes Add more debug code in reservations.
1659 kes Make sure error condition on reserving a volume is handled correctly.
1660 kes Correct handling of volume_in_use.
1661 kes Correct handling of initializing a device.
1662 kes Move handling of broadcasting releasing a device into release_device().
1663 kes Correct attaching dcr to dev so that it is only done if device
1664 is properly initiated.
1666 kes Locking debug level tweaks in SD.
1667 kes Tweak new Volume code.
1669 kes Add exec external-command [wait-seconds] to bconsole. This
1670 executes the external-command. Note! normally external-command
1671 should be enclosed in double quotes.
1672 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1673 it should normally be off in a production system.
1675 kes Implement die command for SD so that we can force it to dump.
1676 kes Implement SD lock debug code.
1677 kes Implement new algorithm for keeping Volume list in SD. It
1678 is now owned by the device.
1680 kes Implement new code for freeing in use volumes that should
1681 resolve if not all, some of the problems of multiple drive
1682 tape conflicts described in bug 801.
1684 kes Fix gui/bacula-web/images files in svn.
1685 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1687 ebl Fix a bug in batch mode (in string escape)
1688 kes Correct migration prune SQL typo that crept in in a
1689 recent 2.1.x change.
1691 kes Move bnet_despool() into class in bsock.c
1692 kes Modify job report to include director name and Build OS.
1693 kes Move drop root privilege and check_catalog() before fork.
1694 kes Add update database scripts (version 9 to 10) to updatedb directory.
1696 ebl Check size and age of each file after its backup to see if
1697 it has changed during backup, if 'checkfilechanges' is set.
1698 The FD will do an extra check (stat(2)) after
1699 each file backup. mtime, ctime and size are compared with
1700 'before backup' information. If time or size mismatch, an
1701 error message will be generated. You must upgrade FD to use it.
1703 kes Make database name and user configurable
1704 --with-db-name=xxx --with-db-user=xxx
1705 kes Add back database type to message.c for debugging.
1707 kes Implement dir_sql() which issues an SQL query.
1708 kes Modify bat medialist to use dir_sql() and do some minor C++
1709 formatting as well as eliminating a number of pointers, simplifing
1712 kes Fix some of the mtx-changer grep commands for tape label readers.
1713 kes Convert a number of bsendmsg into the appropriate send/warning/error
1714 message class calls.
1715 kes Suppress the using database message in the .sql command.
1716 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1718 kes Add context menu for floating a window.
1719 kes Some minor cleanup and name changes in qt-console
1720 kes Add doing mt setblk 0 in Win32 mtx-changer.
1721 kes Apply Martin's bug fix to move definition of ENODATA for
1723 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1724 sqlite2 and sqlite3.
1726 kes More pruning cleanup.
1727 kes Turn on wait_for_drive by default in mtx-changer.
1728 kes Turn on Batch insert code by default as it now passes regression.
1729 kes Add ./configure --enable-bat to enable building of Bat.
1730 No install yet though.
1732 kes Implement a new .sql command for bat.
1733 kes Implement code to turn off pruning in obtaining the next volume.
1734 Pruning is turned off for the status dir command, but turned on
1735 for SD requests and for the list nextvolume command.
1737 kes Correct Qmsg() that was not updated correctly when committing a
1738 previous change (probably the recent TLS patch).
1740 kes Write new subroutine is_volume_purged() that explicitly checks
1741 if the Volume is purged, and if so marks it as such. This should
1742 resolve problems reported about needing to mount twice to recycle
1744 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1745 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1746 amount of duplicated code.
1747 kes Do volume pruning only for the Media Type desired (reduces pruning time
1748 if multiple Media Types are in the same pool).
1749 kes Implement more detailed info in the Job report for the Bacula version
1751 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1753 ebl Add bbatch tool to bench database and insert mode.
1754 Fix sql quote stuff in batch mode
1755 Fix sql stuff for mysql
1757 kes Correct problems with am/pm scheduling. Fixes bug #808.
1758 kes Implement new prunning code that prunes up to 1000 jobs at
1759 the same time. The same technique can be applied to a number
1760 of other prune/purge subroutines.
1761 kes Add an insanity check when starting a new tape job to ensure
1762 that the tape position has not been changed. If so fail the
1764 kes Fix Win32 build for dlls to add the folllowing:
1765 src/lib/bsock.c -- new file with new entry points
1766 src/lib/dlist.c -- new entry points
1767 src/cats/sql_create.c -- new entry point
1768 src/cats/sql_cmds.c -- new DATA item exported
1770 ebl batch mode cleanup bscan-test is ok now.
1771 kes Implement SD code to check length of disk volume before appending.
1773 kes Correct return status on db_batch... routines.
1774 kes Add call to db_write_batch_file_records() to migration code.
1775 ebl Fix AfterJob timing
1776 kes Move the checking of the database in initializion of the Director
1777 to after we drop privileges. This avoids the need for both root
1778 and bacula access to the DB.
1779 kes Correct a misplaced variable definition in src/filed/backup.c
1780 kes Correct how the new batch insert db_create_attributes_record()
1781 uses the arguments. Caused a seg fault in bscan.
1782 kes Implement lock() and unlock() methods in DEVICE class.
1783 Implement block() and set_block(xx) methods in DEVICE class.
1784 kes Modify bnet_connect() so that it uses time() to check for the
1785 wait time expiring (on some OSes, some system calls may not
1786 return immediately).
1787 kes Modify Verify to obtain the previous JobId when it is actually
1788 running rather than at schedule time (as it was in 1.38.x).
1789 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1791 kes When checking pid in pid file, continue running if the pid is
1792 the same as ours. This occurs on IRIX after a system crash.
1795 kes Extend new GUI API.
1796 kes Make the ua structure a class, and implement send_msg(),
1797 error_msg(), warning_msg(), and info_msg().
1799 kes Apply fix from for building wx-console on the Mac from
1801 kes Implement new select mechanism for GUI programs.
1802 kes Reorganize initialization of stackedWidgets in bat.
1804 kes Add updated nagios plugin supplied by Christian Masopust.
1806 kes More bat implementation.
1807 kes File migrate bug with Pool Occupancy using mediaid instead
1808 of jobids. Fixes bug #795.
1809 kes Fix orphaned buffers in filed backup and verify due to
1810 crypto buffers not freed during errors. Fixes bug #789.
1811 kes Extend new GUI api code to tree commands.
1812 kes Ensure that tree and dot commands check console ACLs.
1813 kes Permit marking directory with trailing slash.
1814 kes Allow 20 console connections (instead of only 10).
1816 kes Add smartctl call to bacula-sd.conf as an example of getting
1819 kes Modify jobq.c to let simultaneous restore jobs run. This may
1820 cause them to fail if they cannot get a drive.
1821 kes Add Client Connect Wait to Storage daemon to permit users to
1822 modify the time the SD waits for a FD connection.
1824 kes Correct virtual changer check which was backwards. This caused
1825 volumes to be unloaded into slots already occupied.
1827 kes Apply Command ACL filter to JobId list in restore command.
1828 kes Correct typeo in var.c patch.
1830 kes Don't let Bacula prune File or Job records for the current Job.
1831 kes Fix variable substitution pad + inc bug reported (with patch)
1834 kes Correct SQLite log table index as reported by Luca Berra.
1836 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1838 kes Begin implementing new comm signals for API.
1839 kes Fix a few places in lib/message.c where the open fd may
1841 kes Continue implementing lib/bsock.c (real class). Make jcr,
1842 who, host, and port private. There are new methods to access
1843 them for non-class use. This required touching a number of files.
1845 kes Add LANG=C to autoconf/randpass so it works with languages other
1846 than English. Fixes bug #788.
1848 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1850 You will not be able to generate Include/Exclude list any more.
1851 It will be fixed soon.
1852 If you want to use this, you can apply
1853 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1855 kes Restore of sockets created false error messages because Bacula
1856 no longer restores sockets, but the code was still trying to
1857 set the attributes on a non-existent file. Reported by a user.
1858 ebl finish RecyclePool feature
1859 Media will takes Pool.RecyclePool
1860 when moving from Scratch to a Pool or when user will do
1861 update volume=xxx frompool
1862 To use it, add RecyclePool = aPool to your Pool resource
1865 RecyclePool = Scratch
1869 kes Expand new BSOCK class adding signal() and new BNET signals.
1870 kes Begin enhancing the dot commands adding a new API function
1871 that returns more information and will make it easier
1872 to interface to the Director from a program.
1874 kes Make DEVICE fd private. Its new name is m_fd, and can be
1875 obtained with dev->fd() outside the class. This is the
1876 first of many DEVICE members to be made private.
1877 kes Implement Michael Renner's idea on having a virtual disk
1878 changer. I made some minor modifications (e.g. I did not
1879 implement the Virtual Changer directive, but simply set
1880 the Changer Command to an empty string.
1882 kes Implement a BSOCK send() method that writes the whole record
1883 in a single write() request rather than in two.
1884 ebl add update volume=xxx recyclepool=yyyy
1885 volume takes recyclepool from pool when using update volume=xxx from pool
1887 kes Fix encryption deblocking bug, which caused some restored files
1888 to be truncated. This fixes bug #763.
1889 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1890 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1892 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1893 ebl Use btime_t instead of uint64_t in media patch.
1895 kes Optimize the use of the database a bit in the Status dir command.
1896 Only open it when needed, ensure that if any previous database
1897 was opened, it is closed.
1899 kes Correct VolCatBytes bug from media patch.
1900 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1901 in the case of orphaned records.
1902 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1903 and File records in 300K chunks to be more efficient. This
1904 idea came from Juan Luis Frances (if I remember right).
1905 kes Apply Eric's scratch patch that moves a purged Volume to
1906 the RecyclePool. Question: how is RecyclePool set? what
1907 happens to the ScratchPool?
1908 kes Apply Eric's media patch that collects read/write media
1909 times as well as byte counts. This patch requires a
1910 simultaneous upgrade of the DIR and SD. Note, there
1911 should be some way to turn off timing. I'm not sure
1912 times are in Bacula units.
1913 kes Apply Eric's batch-insert patch.
1915 kes Update projects list.
1917 kes Implement Include/Exclude file lists in FD as dlists using
1918 the new dlistString class. This permits efficiently having
1919 large include/exclude lists and completes project Item 25.
1920 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1921 console is authorized to cancel the job. This fixes bug
1923 kes Modify SD so that the VolCatJobs medium record is updated
1924 at the beginning of a Job rather than the end. This
1925 fixes bug #775 where exceeding MaxVolJobs caused jobs
1927 kes Added a mutex around getting and setting Volume information
1928 so that multiple simultaneous jobs will single thread.
1930 Switch to using Subversion
1931 kes Remove src/pygtk-console/ from configure
1933 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1934 plus the entrypoints.
1935 kes Apply patch supplied that corrects debug print
1936 in canceling jobs for max run time. Supplied as
1937 part of bug #621, which was previously fixed.
1939 kes Test on job_canceled() and sd_msg_thread_done inside
1940 loop starting the message thread to avoid a race condition.
1942 kes Remove rl_catch_signal from console.c as it conflicted
1943 with the header definition. Fixes bug #765.
1944 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1946 kes Clarify some stored/acquire messages to indicate if the
1947 problem is with read or append.
1949 kes Fix memory leak with storage ids in cats/sql_get.c
1950 kes Terminate watchdog earlier to avoid reference to released
1951 memory -- reported by Jason Austin.
1952 kes Move closing the database from jobq.c to the director daemon
1953 termination routine. This fixes memory leaks for shadow jobs
1954 (i.e. migration jobs).
1955 kes Free up the unique jobid chain items in migrate.c. This fixes
1956 a memory leak problem.
1957 kes Convert some ugly looking for statements to use foreach_alist
1958 in findlib/find.c. This will facilitate converting the structures
1959 to use dlist (for large include/exclude lists).
1960 kes Fix a bug in the btree.c and btree.h routines, then rename them
1961 rblist and add them to be built in src/lib. Include some new
1962 methods written by Rudolf Cejka that make the code more readable
1963 (hides some of the ugly casting).
1964 kes Add set_next() and set_prev() methods which make the code much more
1965 readable. Also add a new dlistString class that facilitates storing
1966 strings in dlists. To be used in the large include/exclude lists.
1967 kes Make some trivial modifications to lib/tree.h that use rblist
1968 rather than dlist for storing the tree links. This was suggested
1969 by Rudolf Cejka. The result of this is that the restore tree now
1970 uses red-black binary trees rather than simple linked lists. This
1971 should give rather dramatic speed improvements for directories
1972 contining large numbers of directories/files (more than 10000).
1974 kes Fix maxruntime bug #621.
1976 ebl Implement the include JobID in spool file name project.
1977 kes Reorder projects file in order determined by Jan 2007 vote.
1978 kes Implement item #12 on project list -- quick release of FD by
1980 kes Fix open of SQLite3 db where user does not have write permission
1981 so that DIR does not crash. Fixes bug #761.
1983 kes Add back missing @ in Win32 Makefile.
1984 kes Change 'Device not configured to autolabel' from INFO
1986 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1987 which should restart an indefinite # of times.
1988 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1989 other DIR specifications.
1991 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1992 Fix path quoting in SQLite scripts.
1993 Fix problems with SHGetFolderPath.
1995 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1997 kes Fix Job restart on error bug that promotes an Inc to a Full
1998 backup. This should fix bug #755.
1999 kes Add qt-console and first cut of code.
2003 kes Fix Bacula->Documentation link on Win32 to point to index.html
2004 instead of bacula.html. Fixed bug #750.
2005 kes Return JobId in db_get_job_record() when JobId==0. This should
2007 kes Do not release source pointers when restarting a failed job.
2009 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2010 This *should* fix bug #747.
2011 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2014 kes Modify USTORE constructor to set an empty store_source string,
2015 and don't copy the store_source string in a cancel. Hopefully
2016 this will fix Arno's seg fault, bug #744.
2017 kes Add back code to disable conio in configure. Fixes bug #743.
2018 kes Correct the Options scanner in the FD to correctly handle
2019 SHA1 option, which was eating the next option. Reported by
2021 kes Add code to indicate when the SD is spooling, spool wait, and
2022 despooling as requested by Alan Brown.
2024 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob