1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
31 separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
37 kes Raise some restore debug levels.
38 kes Replace off_t by boffset_t where ever I found it.
40 kes Define a machine dependent ioctl request type for use with
43 kes When a migration job actually runs, re-check the Job record
44 and skip if the job is already migrated. This should
45 significantly reduce the problems with bug #1129.
47 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
48 turn off glibc checks that prevent getting good dumps.
49 kes Implement console 'wait mount' command. Doesn't yet work.
50 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
51 kes Break the do_swapping into do_unload, do_swapping, and
52 do_load. It is much more logical that way.
53 kes Implement a set_dcr_from_vol subroutine in acquire.c for
54 reading volumes. This allows the dcr to be refreshed after being
55 zapped when the wrong volume is mounted.
56 This should fix bug #1126 -- During multiple tape restore, bacula
57 does not ask for physical tape change, but rereads same tape
59 kes Apply patch submitted for bug #1107 with a small modification.
60 This fixes a bug where bcopy copied too many records.
61 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
63 kes Make the default bat restore Pool be Any. This fixes bug #1118.
65 kes Remove debug statement that crashes the SD at the end of
66 a tape during restore. Fixes bug #1125.
68 kes Implement Win32 bat changes made to Branch-2.4
70 kes Tweak separator command in console to start disabled and
71 allow defining no separator character. Also make code a
72 bit more fault tolerant.
73 kes Make btraceback write the traceback to the working directory
74 before attempting to mail it.
75 kes Add a RFC to Projects.
77 kes Attempt to implement a kludge to make Qt work with bat
79 kes Setup rstorage correctly. Virtual backups are working.
81 kes Move setting JobLevel and JobType into a method, which should
82 allow completing Virtual Backups.
83 kes Fix verify jobs to work again.
85 kes Virtual Backup tweaks -- it is close to working.
87 kes Ensure that SD tried to mount a volume not in an autochanger
88 at least once before asking for operator intervention.
89 kes Make SD aware of Virtual Backup jobs.
90 kes Add VirtualFull for bat.
91 kes Changes to get read storage correct for Virtual Backup.
93 kes Remove old code from label.c
94 kes Split display_display_info() out of write_bsr_file()
95 kes do_vbackup_init() working -- i.e. bootstrap file built.
96 kes Change Bacula trademark owner from John Walker to Kern Sibbald
97 kes First non-working cut of vbackup
98 kes Correct FD heartbeat code to use volatile variable accessed by
100 kes Zero thread id with memset if on Win32 in case it is a struct.
101 kes If cannot create JobMedia record, continue to try to write eof
102 and clean up in block.c
104 kes Add code to interface OpenSSL to new Win32 pthreads code which
105 used a structure for thread_t.
107 ebl tweak bat for win32 compilation
109 ebl Remove tokyo cabinet from the source
110 ebl Update configure/autoconf to support berkeley DB
111 ebl Add a sort to db_get_file_list() to improve bsr construction time.
113 kes Add a mtx-changer.conf file that is not overwritten during
114 an upgrade. It fully configures the mtx-changer script.
115 kes Clear in-use bit on vol when unused while swapping.
117 kes Remove sleep at end of ./bacula
118 kes Clear hash packet for hardlinked files correctly. This corrects
119 a long standing bug where hardlinked files selected individually
120 would occasionally not be restored.
122 kes Apply Eric's patch to ensure that autoprune does not return
123 a Volume not in the autochanger unless requested to do so.
124 kes Correct bat restore display of multiple drives. This fixes
126 kes Do find_a_volume() each time an unload is done. This
127 fixes the failure of maxvol2-test.
129 kes Add some SD debug code.
130 kes Do find_a_volume() each time an unload is done.
131 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
132 and adds --with-db-port to ./configure.
133 kes Use Qmsg() in job.c watchdog callback.
135 kes Release main control rwlock if ABORTing.
136 kes Make watchdog connect timeout queue messages rather than sending
137 directly to avoid lock conflicts with the real thread.
138 kes Add const char in dbd.c to avoid compiler warnings.
139 kes Fix python compiler string warning. Note, IMO the GNU C++
140 compiler guys have made a *very* bad change to their compiler.
141 They now force all strings to be 'const' unless you explicitly
142 cast them, which is extremely ugly and ruins nice code as well
143 as creates a lot of useless work.
145 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
146 mt. This fixes bug #1116.
147 kes Add const in python files to reduce compiler warnings.
148 This may have to be backed out because of later compiler
150 kes Fix failure of 2drive-concurrent-test. Always read label;
151 clear_unload() only after drive is defined in acquire_for_read().
153 kes Generally clean up the manual tape loading code. The main
154 conceptual change is that when a volume is marked to be unloaded,
155 its volume name is retained, and it is only marked as unloaded
156 when either the autoloader says it is unloaded or another tape
157 is read on that drive.
159 kes Add debug code and refactor subroutine in stored/mount.c
160 kes Fix format problem in bscan output reported in bug #1105.
161 ebl Fix get_next_volume_for_append logic with autochanger
162 - use pruned volumes if found
163 - don't reset the inchanger flag after getting a recycled volume
165 Fix recycle_oldest_purged_volume to take InChanger flag in account
167 ebl Add mmap/unmmap implementation for tokyodbm under win32
169 kes Make first step toward eliminating globals from config
170 scanning. Also should be a workaround for FORTIFY_SOURCE
171 GNU C bug -- fixes bug #1042.
173 kes Apply duplicate job tests to restarted jobs.
174 kes Copy more data when restarting a job so that run
175 overrides are kept. This should fix bug #1094.
177 kes More word alignment cleanup.
178 kes Fix bug where SD did not ask operator if the device could not
179 be opened. Reported by Eric.
181 kes Add dbuser to DIR conf file (replaces user).
182 kes Add --with-db-password to ./configure
183 kes Fix regress to handle db_password.
184 ebl Add new "status storage slots" that list autochanger
186 ebl Update vtape driver to compile only under Linux.
187 ebl Fix a bug when restoring with a wrong mediatype.
189 kes Eliminate ints from conf files and structures to avoid
190 word alignment problems
192 kes Fix bug reported by Scott Barninger where the bacula script
193 refers to scripts in the wrong directory. Needed to meet the
194 requirements of recent FHS location changes.
195 ebl Disable vtape for FreeBSD.
197 ebl Modify disk-changer to check if slot contains something before
200 ebl Fix vtape on win32 and debian.
201 ebl Fix autoselect patch (cause segfault).
203 ebl Fix autoselect option broken for a while. Fix #1089. Need some
204 work with StorageId to be able to use a particular drive in a
207 ebl Rename vtape to vtape.
208 ebl Update vtape driver.
210 ebl Modify vtape driver to avoid sparse file.
211 kes Add make clean of qt-source directory during ./configure
212 kes Store last block number written to tape in DEVICE and
213 use it for testing for correct last block on EOT.
215 Release Version 2.4.0:
219 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
220 This fixes bug #1095.
222 kes Add create_postgresql_database.sql to Win32 installer. Should
223 fix problem reported by Juilio Monteiro.
224 kes Get correct slot when auto unloading a device. This fixes bug
227 kes Fix multiple media restore.
228 kes Make DEVICE Slot private and access it via a method.
229 Allows better control over when it is set and cleared.
230 kes Fix possible seg fault if SQL error.
232 kes Add Martin's fixes to argument scanning for the estimate
233 command. This fixes bug #1093.
234 kes Add debug code to SD.
235 kes Fix renaming a Volume, which used the wrong Volume name.
237 kes If operator has rewind tape, print warning, release tape and
238 try once more. If tape is positioned somewhere, something went
239 wrong, so mark the tape in error and try once more. Previously
240 this error was fatal, now it produces an error message.
241 kes Ensure correct volume name displayed during restore
242 kes Ensure that Volume is mounted for restore.
244 kes Fix a few more Coverity reported problems.
246 kes Apply Allan Black's status dir job count patch.
247 ebl Add information about IMPORT/EXPORT slots in mtx-script.
248 kes Enhance a couple of SD debug messages.
249 kes Tweak unload flag setting and ensure it is set during swap.
251 ebl Fix #1091 about bad output in estimate command.
253 kes Modify autochanger locking to attempt to avoid race
255 kes Make sure device not busy before doing label command.
256 kes Display open() errors except when polling. Previously too
257 many were suppressed. This should fix bug #1070.
258 kes Fix Win32 reparse points. Bacula will not recurse into any
259 reparse point directory, including mount points, unless the
260 directory is explicitly mentioned at the top level (same as
261 with Unix). A file that is linked to another file will be
262 backed up -- much as Unix does for hardlinked files.
263 This fixes bug #1041.
265 kes Remove double quotes from ChangeLog and ReleaseNotes
266 kes Remove StorageId test when pruning and recycling (Eric's changes).
267 kes Remove old form of locking when getting volumes -- causes deadlock.
268 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
269 the name unique and to eliminate compile time error.
270 kes Add accurate.o to Win32 FD Makefile
272 kes Fix cats dll build on Win32 after db_update_job_end_record
273 calling sequence change.
274 ebl Switch to tokyo dbm instead of htable in accurate code
275 ebl Include tokyo dbm to bacula source tree
277 kes Fix buffer overruns detected by Coverity.
279 kes Tweak joblog display.
281 kes Implement --without-qwt
282 kes Fix layout of restore tree dialog
283 kes Add configure bat QWT libraries, so that bat can be built
284 with or without the QWT libaries.
286 ebl Add dummy tape driver for regression tests.
287 kes Make sure we unload the right slot when swapping.
289 kes Add debug times, reduce size of two-pool-changer test
291 ebl Tweak autoconf scripts for vtape
293 kes Improve SD reserve debug code.
294 kes Testing an improvement to free up volumes no longer in use.
296 kes Rework SD acquire for read to handle autochanger Volume
298 kes Implement regression that explicitly tests swapping a Volume
299 from one drive to another.
300 kes Enhance disk-changer to detect most error conditions.
301 kes Fix SD code so that it properly swaps a Volume between drives.
302 This fixes bug #1083.
304 kes Apply libdbi patch from Joao Freitas for regress and for
305 Bacula trunk. Regress now works with libdbi. Nice.
306 kes Apply .nobackup patch from bug #1077 submitted by
308 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
309 name into jobs cloned via the run directive.
311 kes Prevent a Volume that is being swapped from being freed from
312 the volume list. This will most likely fix, at least partially,
314 kes Fix strippath so that it does not get a buffer overrun and crash FD.
315 This fixes bug #1078.
316 kes Remove 50 millisec wait in SD that broke debugger.
317 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
318 that a job may run, counted from when the job was scheduled.
319 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
320 a job may block waiting for a resource, counted from when the job starts
321 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
322 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
323 that implements multiple commands per line in the console when using
324 readline. Modify the default to use a semicolon as the command separator.
326 ebl Fix SQL query in migration code.
327 ebl Make accurate mode with hash disk pass regression tests
329 ebl Implement first cut of accurate backup with hash disk.
331 kes Force unload of volume when wrong volume mounted in SD.
333 kes Fix bat seg fault at termination.
334 kes Add Bacula generated version to bat about box.
337 kes Experiment with allowing multiple read jobs.
338 kes Move final volume swapping code to DCR method and
339 call it from acquire_for_read().
340 kes When wrong volume is mounted during read, unload_autochanger.
342 kes Integrate the libdbi changes from Joao Henrique Freitas
344 kes Stop searching for Volumes in SD askdir if DIR returns the
345 same volume name twice in a row.
346 kes Close bat console windows first to eliminate error message
349 kes Tweak the swap Volume from one drive to another code so that
350 it now seems to work.
351 kes Resolve several problems with recycling that broke the new
352 code (these problems are in 2.2.9 as well).
353 kes Remove the volume lock when calling the sysop code.
354 kes Don't mark a reserved volume with no writers as unused otherwise
357 kes Rework class structures for VOLRES, DCR, and DEVICE to make
358 the method names a bit more logical, and for more logically
359 handling the responsibilities.
361 kes Remove redundant code in terminating the scheduler that just
362 causes a seg fault in many cases.
363 kes Cleanup releasing a volume and make it a DCR method.
364 kes Improve algorithm for detecting pre-reserved volume and
367 kes Tweak volume swapping code so it works.
368 kes Correct name overloading in mount.c
369 kes Replace released flag in VOLRES with reserved and add access
370 methods for the VOLRES class.
371 kes Prevent volume from being released while being swapped.
372 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
374 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
376 kes Refactor parts of stored/mount.c
378 ebl Add sanity checks for VolWriteTime and VolReadTime
379 ebl Take care of bad clock changes while computing VolWriteTime
380 and VolReadTime. This should fix or limit #1066
381 kes Correct error string numbers in dird/catreq.c
382 kes Restructure reserving, acquiring, and mounting volumes. Calls to
383 autochanger are deferred for mount.c -- simplifes the code.
385 kes Do not prune any running job. It just fails the job.
386 kes Lock the volumes when changing dev->reserved_device and marking
387 the volume unused otherwise the device can get reserved by
388 another job before the volume is released, thus blocking it.
390 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
391 kes Fix bug #1063, reuse of freed ptr in list nextvol.
392 kes Release regex compile buffer in filed/job.c
393 kes Add proper type of const char in sql_create.c
394 kes Turn off debug in daemon termination routines
395 kes Move free_volume_list() before devices are freed in stored.c
396 kes Fix reference to uninitalized stack variables in bregex.c.
397 This should correct bug #1067.
399 kes Fix possible seg fault in SD when freeing a volume entry.
401 kes Implement unload_dev() before swap device.
402 ebl Add statistics prunning with option and menu
403 kes Separate unload_dev() from unload_other_device() in autochanger.c
405 kes Apply patch from bug #1069 that corrects spurious error messages
406 when ACLs enabled on SGI but no ACL exists.
407 ebl Fix small segfault in bacula-sd when debug level is 500
408 kes Modify run_program() and run_program_full_output() to use
409 call by reference for the results string. This corrects a long
410 standing problem where the address of the string may be changed
411 in the subroutine but not in the calling program.
413 kes Re-enable code to remember last volume mounted on a non-tape
415 kes Add patch supplied in bug #1068 that fixes a SD crash when using
416 a Virtual autochanger.
417 kes Generate correct JobMedia records during spooling/despooling when
418 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
419 <tih@hamartun.priv.no> for excellent analysis and testing.
421 kes Tweak hash algorithm for htable using Martin Simmons idea
422 for doing a circular shift.
423 kes Remember what volume is in VTLs (previously turned off for
425 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
426 pointed out some problems in creating JobMedia records during
427 spooling with concurrent jobs. Fix the problem by updating the
428 start file position before despooling and generate a jobmedia
429 record at the end of despooling.
431 kes Fix handling of JobMedia records during spooling and when a
432 Volume is changed without actually writing data to the Volume.
434 kes Rework certain SD locking based on gdb tracebacks of deadlocks
435 sent by Eric. This code now uses only the volume_lock() rather
436 than the reservations lock when at EOM and acquiring a new
438 kes Ensure only one exit point in several subroutines.
440 kes Implement bsock code to permit locking. Use the new code in Verify
441 in the FD to prevent the heartbeat thread from disrupting the Verify
442 data sent to the Dir.
443 kes Modify SD locking to eliminate locking the reservations system from
444 outside the system. Use the volume lock when getting media data
445 and reserving a new volume at end of media.
446 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
447 when SD starts are not locked into place.
449 kes Fix error compiling runscript code on 64 bit machines.
450 kes Tweak Win32 mount point code.
451 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
452 cleared giving bad file estimate).
453 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
456 kes Keep Schedule run lists in order as suggested by
459 kes Implement autostart scripts for Debian.
460 ebl Implement upgrade catalog scripts.
462 ebl Apply jobstat patch for long term statistics. Have to implement
463 purge stats command and upgrade scripts.
464 kes Fix mtx-changer.in for broken Debian mt program.
466 kes Fix large number of JobMedia records reported by Eric Bollengier.
468 kes Apply doc fix from bug #1062.
469 kes Resolve crash and improper restore wx-console Win32 restore
470 GUI. Fixes bug #1065.
471 kes Update Win32 wxWidgets to latest version.
472 kes Attempt to do correct handling of Win32 mount points. Should
474 kes Fix Win32 FD backup/restore memory leak due to improper termination
475 of BackupRead/Write. This fixes bug# 1038.
477 ebl Reduce memory usage for accurate backup, working only with ctime
478 and mtime. (not all Lstat field)
479 About 40MB for my Linux system (400.000 files)
481 kes Add dcr->reserved_volume flag that allows us to release a volume
482 even if it is not vol->released. This allows maxvol2 to work when
483 Volumes expire and we are already writing to the device (i.e. a
484 volume is pulled out from under us by another job terminating after
485 we reserve the drive).
487 ebl Permit multiple command/console per runscript definition.
488 RunScript { command = /bin/true ; command = /bin/false ... }
489 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
490 (restart an application) just after the VSS snapshot on windows.
491 kes Don't zap dcr values during release_volume() as they might
492 have the next Volume to be mounted.
493 kes Fix AIX prototype.
495 kes Second cut of drive switching during backup.
498 kes Update Win32 version of wxWidgets to most recent version.
499 kes Tweak Copy job details.
500 kes Rework dir_find_next_appendable_volume to make a bit more effort
501 to find a suitable volume before giving up.
503 kes Make ask_sysop_to_create... to return if waken from wait.
504 This helps get out of blocked conditions.
505 kes Experimental implementation of switch_device in reservations.
506 kes Implement FD version to allow easier protocol changes.
507 kes Add Plugin Options string -- not yet passed to FD.
508 kes Implement PluginOptions ACL.
510 kes Attempt to correct problems with restores with autochangers and
511 use counts going negative
512 kes Rework SD status command and implement API for bat. Implements
513 header, runing waitreservation, devices, volumes, spooling,
514 and terminated status keywords.
515 .status storage=xxx <keyword>
516 kes Clarify TLS error message by adding double quotes around name.
517 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
518 kes Pass jcr to tls routines so debug messages can be handled better.
519 kes Rework jobq resource allocation code, and possibly fix a bug
520 that caused reference counts to get out of sync.
522 kes Rename fd/dir plugin to use Bacula standard underscore.
523 kes Plugin work -- bring dir up to fd level.
524 kes Start implementation of VTL code
525 kes Fix Win32 build after adding new cats subroutine.
527 kes First cut at Duplicate Job implementation.
529 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
530 kes Start PluginOptions string, and refactor a bit of ua_run.c
531 ebl Apply Allan patch that permit to reset recyclepool.
533 kes Test patch -- possible fix or improvement for bug #1053
534 kes Refactor FD and SD status commands to permit new API code in
535 SD, and to fix Win32 build.
536 kes Win32 build is now working.
538 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
539 some ideas in patch from Scott Bailey.
540 kes Begin implementation of duplicate Job control.
541 kes Fix some of Win32 build after recent additions.
542 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
543 which causes the FD to detect whether or not the OS has the
544 honor no dump bit (*BSD systems), and if so, to skip backing up
545 any file with this bit set. The feature is enabled by setting
546 'honor no dump flag = yes' in the Options section of a FileSet.
548 kes Correct po warning message with datarootdir
549 kes Implement more code in dird.c to put configuration parsing in
550 a class rather than use globals.
551 kes Restructure SD status command for implementation of bat API
554 kes Suppress incorrect 'Will not descend from x into y' messages.
555 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
556 daemon globals used by parser.
557 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
559 kes Fix free of plugin_list when none exists.
561 ebl Apply accurate project patch.
563 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
564 on non-mempool object)
565 kes First cut of converting FD .status to work with bat API.
567 .status client=XXX header
568 .status client=XXX running
569 .status client=XXX terminated
570 kes Implement first cut of Copy Job.
571 kes Implement Catalog in Pool resource. It overrides catalog specified
572 in the Client resource.
574 kes Apply patch (with some difficulties) from Joao Henrique Freitas
575 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
577 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
578 ftruncate() actually works. In the case of some (cheap) NAS devices,
579 it does not, and so recycling NAS Volumes does not work. The code
580 simply unlink()s the file, then recreates it. This fixes bug #1011.
582 kes First incomplete cut of big malloc blocks for htable.
583 kes Tweak plugin code.
585 kes Plugin debug code + tweak a couple bat dialog layouts
587 kes Fix creating first JobMedia record during Migration to include
588 proper index. This caused slow restores of migrated jobs.
589 kes Temp fix to plugin name file_index.
590 kes Bacula backed up and restored a MySQL database.
592 kes Implement plugin restore.
593 kes Implement parsing of db_driver to give db_type index.
595 kes First cut of plugin restore code.
596 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
597 and do not strip paths on symbolic links.
598 kes Set catalog backup database and user name from values specified on
599 the ./configure line.
600 ebl Fix #1031 about wrong pool source information in job report.
603 kes Remove a redundant jcr argument to find_files, match_files, and
605 kes Implement '.status dir header|scheduled|running|terminated' that
606 prints the requested status section. With the exception of the
607 header, the other reports have fields separated by tabs (\t).
609 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
610 a resource embedded run command to find a since time if no explicit
611 since time was supplied on the command line.
612 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
613 that updates the state file at job termination time in addition to
614 when the daemon terminates.
616 kes First version where a plugin did a backup.
617 bpipe-fd.so created a backup file, wrote a test
618 string to it, and Bacua could restore this fabricated file.
620 kes Implement DB Driver = string for the DBI driver.
621 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
622 kes First cut of code for loading Win32 plugin dlls. Implement
623 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
624 and implement a dlfcn.h file based on opengroup's definitions of
627 kes First cut plugin directives.
629 kes Apply patch from bug #1049 to prevent stripping the path on a
631 kes Attempt to fix bug #1047 where stripping a path corrupts the
632 heap. Waiting for feedback.
633 kes Correct the Mount message not to suggest labeling a new tape
634 when doing a restore. Submitted by email by John Stoffel.
635 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
636 FD by using casting. Reported in bug #1042.
638 kes A bit of crypto cleanup. More later.
640 Release Version 2.2.8
642 kes Apply patch from Martin to correct bug #1040, bscan sets existing
644 kes Fixed important spelling error in doc -- bug #1045.
646 ebl Fix bextract to be able to extract non-portable Win32 data to
648 kes Move initialization of read/write res lock earlier in the code.
649 This fixes the crash with a null conf file. This fixes bug
651 kes Redefine CURES in lib/parse_conf to be URES and move it all
652 into lib/parse_conf.c -- this responds to bug #1042, but does
653 not fix it. The fix is not to compile with FORTIFY_SOURCE.
654 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
655 the trunk SVN. I don't think this was reported as a bug.
657 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
659 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
661 kes Add DataDespooling and DataCommitting status (committing is
662 the last despooling).
663 kes Finish implementation of new reservations code noted below.
665 kes Fix bsnprintf for float point numbers. I broke recently when
666 parameterizing some variables. This fixes bug #1036.
667 kes Undo recent reservations changes ... will apply them later
668 when they work better.
670 ebl Fixes #1034 which cause mysql to hang the connection after 8h
671 ebl Change default statistics target of filename.name and path.path
672 fields for PostgreSQL. This speeds lookup by indexes. Thanks
674 kes A few more tweaks to new reservation code. Make sure to clear
675 vol released flag when retaking volume. When reading label and
676 label is bad mark volume unused. When recycling, mark volume
677 unused so it can be renamed.
679 kes Fix reserve_volume() so it doesn't release a volume in use
680 (i.e. a volume entry not marked released). This should be
681 the last part needed to fix bug #1018.
683 kes Move Heartbeat documentation from Job to Director resource.
684 This fixes bug #1033.
686 kes Fix existing switch drive SD code to call autochanger to release
687 any old volume. This must be done to keep the autochanger from
688 releasing subsequently newly reserved volumes in doing a close().
689 This should fix bug #1018.
690 kes Fail if attempting to get console input in batch mode. This
691 should help fail RunScript console commands that are incomplete.
692 kes First cut implementing switch_drive() in SD (not actually called).
694 kes Implement first cut running console commands in a RunScript.
696 ebl Fixes bug #1028 where 'Selection Type' option was not usable
698 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
701 Release Version 2.2.7
703 kes Add new free_tls() entry point so that Win32 builds.
704 kes Fix compile warning in src/lib/util.c
705 kes Fix entry point for edit_job_codes() so that Win32 builds.
706 kes Fix seg fault Frank Sweetser reports in regression testing
707 on his systems. The problem was that the original author of
708 bsnprintf.c did not take into account the side effects of
709 using ++x in the argument to a #define.
710 kes Make SD protocol backward compatible with version 2.2.x.
712 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
713 because Bacula no longer restores sockets.
714 ebl Always use ignorecase fileset option on win32 FD.
716 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
717 that implements double quoting include names in conf files,
718 and also allows piping input by having the first character
719 be a vertical bar (|).
720 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
721 that implement %f in RunScripts to pass the FileSet name.
722 kes Skip leading | when lex input comes from a pipe as suggested
723 by Michael Stapelberg <michael@stapelberg.de>.
725 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
726 Nerijus Baliunas <nerijus@users.sourceforge.net>
728 kes Implement Plugin Directory and plugin events.
730 kes Implement a security enhancement: TLS authentication but no
731 encryption. Enabled by setting 'TLS Authentication = yes'.
732 Note when this is on, TLS encryption is turned OFF!
734 kes This patch corrects a problem where the maximum concurrent storage
735 jobs counter gets out of sync during restore jobs causing jobs to
736 'wait on max Storage jobs'. This patch fixes bug #1009.
738 kes This patch fixes bcopy so that it produces correct Volumes.
740 kes This patch eliminates spurious output to the console during a VerifyVolume
741 job that contains encrypted data. It fixes bug #1024.
743 kes This patch prevents the 'status dir' command from trying to use a scratch
744 volume and possibly moving it from one pool to another. This patch fixes
747 kes Add new include to postgresql.c suggested by Marc Cousins so
748 that it compiles correctly with pgre version 8.3.
750 kes Fix --archivedir addition to configure. Replace it with
751 --with-archivedir in configure.in This fixes the regression
753 kes This patch fixes bug #1012 where the job is canceled because
754 of Max Run Time exceeded when the job has not yet started.
756 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
757 one 'part' to write. Instead of each part being stored on disk,
758 written to DVD, then deleted from disk, all parts are written to disk,
759 and only the last is written and deleted from disk.
760 kes This patch fixes the status command to include the formating string for
761 JS_AttrInsterting. It fixes bug #1021.
762 kes This patch should fix the Mac OS X build problem on the latest
763 Darwin, where sys/types.h was not included correctly (apparently
764 due to a change in the Mac headers). The solution was to explicitly
765 ensure that it is defined for the ./configure.
766 This patch also has a rebuild of configure that includes the Debian
767 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
768 kes This patch should ensure that queued messages to the console are
769 displayed as soon as possible. It should fix bug 1007, but has been
770 reported not to work.
772 kes This patch fixes the infinite loop when trying to increase the
773 maximum number of volumes in a Pool during the add command.
774 This patch fixes bug #1008.
776 Release Version 2.2.6
778 db Remove extra data on estimate command in joblist for bat.
780 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
781 really change anything, but is the beginning of doing it *right*.
782 To do it completely right the LastWritten date must be passed to
783 the SD, but it is not yet done.
784 kes Minor tweaks to some bat restore SQL.
785 kes This patch fixes bug #1003 where putting the message output from
786 a Verify job into the catalog results in a recursive loop. The problem
787 seems to show up only with postgresql (to be verified).
788 kes Correct %x to %p in postgresql debug statement.
790 kes Fix bug #942 where lots of emails where generated when the heartbeat
791 interval was low and Bacula wanted a different tape from the one in
794 ebl Add new SD despooling attributes and Dir inserting attributes
795 job status codes in the catalog (Status table).
797 ebl Use qmake-qt4 instead of qmake when available (debian system).
799 kes Add a security warning to src/cats/make_catalog_backup.in indicating
800 that passing the password via the command line (arg 3) is insecure.
801 This responds to bug #990 (it doesn't fix it).
803 kes Set default debug_level to zero. This corrects bugs #991 and #993.
804 kes Fix a crash in bat when it cannot connect to the Director for example
805 if the Director is not running.
806 kes Remove redundant INDEX (JobId) from File table in the trunk.
808 kes Make explicit exception to GPL in LICENSE to permit linking
809 the Win32 FD with Microsoft VSS code.
810 kes Apply the Solaris package patch from
811 Masopust, Christian <christian.masopust@siemens.com>
812 kes Apply the patch to optionally add a timestamp in the debug output
813 submitted by Mariusz Czulada <manieq@wp.eu>.
815 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
816 backend (sql_strerror). Fixes bug #989
818 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
819 It applied with no problems.
820 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
822 kes Redirect stderror to stdin on mt status command in mtx-changer.in
823 since the status is returned on stderr on Solaris.
824 kes Activate Close button on tray-monitor window. This fixes
826 kes Check for NULL item in parse_conf.c before calling it. In the
827 case of Device, there is no item and this caused a seg fault when
828 Device appears in the conf file.
829 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
830 avoids pulling in config.h multiple times in some new code.
832 kes Fix spurious warning message printed when creating a volume with
833 a LabelFormat. This fixes bug #976.
835 Release Version 2.2.5
837 kes Add JobId in place of Job name in all the Jmsg() output.
838 kes Correct the APP_DESC for the Win32 storage service (remove an e).
840 kes Make maxvol-test and new more strict maxvol2-test work.
841 kes Print JobId in all Jmsg() job output.
843 kes Add new SD despooling attributes and Dir inserting attributes
844 job status codes. This fixes bug 961.
845 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
847 kes Fix doc issue. This fixes bug #963.
848 kes Fix listing performance problems in bat. Pointed out by
850 kes Remove old debug code.
851 kes Fix bat code that tests for Win32. This should fix bug #968
852 kes Query 5 list wrong Vol after migration. This fixes bug #960
854 ebl Fix #969 where user can't change Replace option in restore menu.
856 kes Save jcr in thread specific data (tsd) for each thread.
857 kes Make Dmsg() print JobId as -%u.
858 kes Make Jmsg, Emsg, and others automatically pickup the jobid
859 for the thread if it exists.
860 kes Remove old reservation debug jid code.
861 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
862 ebl Add an option that permit to specify spool size in job
863 definition. (Applying patches/testing/spoolsize_per_job.patch).
864 You must upgrade SD and DIR at the same time.
865 dvl Add new configuration item --archivedir
866 dvl Adjust regression tests to use tmp not /tmp. This will allow
867 multiple concurrent runs of the regression tests.
869 kes Fix race condition that drops final block written to volume.
870 This happens in rare cases with multiple simultaneous jobs
871 when the Volume fills. This fixes bug #964. May be related
872 to bug #935 and possibly #903.
873 kes Eliminate more strerror() and replace with bstrerror().
874 kes Remove BSD getopt and replace with unrestricted IBM version.
875 kes Fix Win32 build for changed calling sequences.
876 kes More tweaks to the mount volume routines to get everything
877 right. Changed variable name from find to have_vol, which is
878 much easier to understand.
879 kes Enhance btimer debug code.
881 kes Fix FD->SD authorization failure, which was due to spurious
882 wakeups from a pthread_cond_timedwait(). Simply check the
883 predicate before continuing. This fixes bug #953.
884 kes Add const char where needed (more to do). Remove temp debug code.
886 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
887 kes Don't overwrite error message in check_tables_version.
889 kes Unlock batch insert tables with same calls used elsewhere.
890 kes Allow starting 59 jobs a second.
891 kes Make SD session key more random.
892 kes Add retry for SQLite opening db if it fails. Probably helps
894 kes Suppress extra error messages during batch insert failure.
896 kes Add jcr to timer packets so if killed message can be sent to job.
897 kes Add JobId to all Dmsg() output.
898 kes Put some FD auth code on dbglvl rather than fixed.
899 kes Return insert attributes error message in db msg buffer to avoid
900 false error messages. Helps fix bug #966.
901 kes Separate batch init error messages. Probably helps fix bug #966.
902 kes Make SD code that contructs attribute insert check string lengths
904 kes If Dir gets an error during inserting attributes, cancel SD.
905 This reduces unnecessary error messages.
907 kes Correct search boolean for getting Volume info
908 ebl Cleanup batch insert code. Probably fixes bug #965.
909 kes Back out one small change to the reservation system (reserving a volume).
910 kes Rework how a Volume is mounted. It is now much more intelligent and
911 will always attempt to use any mounted volume if possible and reduces
912 calls to the Director asking about volumes.
914 kes Turn off some code when batch insert not enabled.
915 kes Edit FD name in connect error messages.
916 kes Rework the reservation system to take into account that the Director
917 might give us a Volume that is different from the current one being
918 used, and to ensure that we don't exceed Maximum Volume Jobs.
919 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
920 fatal error with multiple jobs running'
921 kes Add more debug code in reservation system.
922 kes Implement maxvol-test to check bug #947.
924 kes Add code to handle tray monitor separated from Win32 FD.
925 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
927 kes Add missed return in fixing verify bug -- trunk only.
928 ebl Fix a command parser issue causing a director segfault.
929 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
931 kes Increase the max block size to 4MB fixes bug #957.
932 kes ERABT if user sets min block size > max block size. Fixes bug #956.
933 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
934 is not properly mounted (recognized) during a poll.
935 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
936 Job that has differences reports Verify OK.
937 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
939 ebl Add an option to operate on all pools with update vol parameters.
940 This complete the project 20. Patch from Nigel Stepp.
941 ebl Add history support to bconsole when using readline.
942 Using Ctrl-D to exit doesn't update .bconsole_history
943 kes Modify new volume algorithm to use max MediaId for generating next
944 volume number rather than the count of Volumes. This should essentially
945 eliminate the failure rate if some volumes were deleted. Bug #921.
946 kes Begin implemention of Optimize Job Scheduling.
947 kes Implement restore callback that Dirk and I agreed on for bat
948 restore. This fixes bug #928. Restore of backup of zero files fails.
949 kes Fix SQL Catalog logging which broke with new db_escape_string
952 Release Version 2.2.4
954 kes Fix bacula_cats.def for new db_escape_string().
955 kes Increase size of name string when FD making connection to SD.
956 May fix bug #953. FD->SD connection failure.
958 kes Add code to help Dan debug 2drive-incremental-2disk test.
959 kes Add code to try to fix bug #908.
960 kes Add waits to multiple exit detection code to try to force pid
961 file to always be deleted.
962 kes Restore good dev.tar.gz to rescue set appropriate binary property.
964 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
965 trying to switch drives by checking for blocking before unblocking.
967 kes Cancel storage daemon in all cases where FD reports error. This
968 should fix virtually all cases of bug #920.
969 kes Fix db_escape_string() for MySQL which did not compile.
971 kes Fix error message that was clobbered when Dir tells SD it does not
972 have write permission on Volume. This should fix a minor point
973 in bug #942, but not the main problem.
974 kes Add code to cancel job in SD if FD connection fails. This should
976 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
977 dvl Pass jcr and db into db_escape_string() to enable better escaping
979 kes Fix migration code to get correct Volume name with multiple volumes
980 by skipping |. Fixes bug #936.
981 kes Implement patch supplied by Landon to fix bug #944 where using
982 TLS with bconsole uses 99+% of the CPU.
983 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
985 kes Move patches into patches directory.
987 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
990 ebl Using 'm' in bconsole will show messages like before,
991 and not memory usage.
992 kes Fix bug #935, and probably also bug #903 where files were not
993 restored. MediaId was not properly set in JobMedia record after
996 kes Suppress chown and chmod error messages if the FD is not running
999 kes Apply Martin Simmons' patch that should turn off the new API usage
1000 when batch insert is turned off allowing building on older
1002 kes Add ./configure search in qwt-qt4 for qwt package
1004 kes Bacula is now free of 3rd party GPL copyrighted code!
1005 kes Remove idcache.c
1006 kes Add guid_to_name.c/h which replace idcache.
1007 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1009 ebl Detect if new PosgreSQL batch insert API is present.
1010 kes Correct incorrect mempool call causing Director crash. Occurs on
1011 systems without va_copy().
1012 sb Update spec files for 2.2.1 release
1014 kes Fix memory pool call in ua_output.c. bug #934.
1015 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1016 Add test program to fnmatch.c
1018 kes Integrate patch to README.vc8 from
1019 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1020 edit it to get it into Unix patch format.
1021 kes Implement mkpath.c to replace old FSF makepath.c
1023 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1025 Release Version 2.2.1
1027 kes Update POTFILES.in
1028 kes Cleanup a few underquoted AC_DEFUNs in configure
1029 kes Apply patch from Martin Simmons that adds a test for va_copy to
1032 kes Fix bug #921 by increasing the number of tries to create a new volume
1034 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1035 can be called multiple times. Implement a version for machines
1036 without va_copy() that gets a big buffer.
1038 kes Integrate more portable zone offset code into bsmtp.c
1039 Submitted by Attila Fülöp.
1041 kes Fix bad SD->FD return status reported by
1042 (James Harper) <james.harper@bendigoit.com.au>
1043 ebl Fix a bug in read_close_session which return random status
1044 thanks to James Harper
1046 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1047 and directory names during restore of single file/directories.
1048 kes Add sanity checks to .sql command when string is empty. Hopefully
1049 that will resolve Dirks Director crash.
1051 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1052 in the bsmtp chat subroutine when debug is >= 10.
1054 kes Fix Director crash when running bat SQL queries.
1055 kes Add David's notes on Item 8: Copy pools.
1057 kes Rework projects file to be current and ready for a vote.
1058 kes Enhance lex scanner error message.
1060 kes Tweak LICENSE file to mention BSD code.
1061 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1062 if specified on the ./configure.
1063 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1064 This class is intended to allow us to open a second bsock to the
1065 Director while in the restore subdialog.
1067 kes Fix configure to create bat Makefile before creating dependencies.
1068 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1069 kes Add a tooltip to the tray monitor.
1070 dvl Set the Director's PID file before dropping privs. This fixes
1073 kes Update AUTHORs file
1074 kes Increase the default max concurrent jobs to 20 in FD and SD to
1075 correspond with the default .conf files.
1076 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1077 some different, of the same file created by RN when porting the
1079 kes Rearrange some of the Win32 directories and the placement of the files
1081 kes Set DEVELOPER flag in version.h
1083 ========================================================================
1084 Release Version 2.2.0
1086 kes Apply a second doc patch from Marc.
1087 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1088 improves the tips section that discusses how to setup multiple
1091 kes Update bat README file.
1092 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1093 corrects a typo in the Recycle status check in db_find_next_volume().
1094 This will probably fix a number of annoying problems with multiple
1096 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1097 bnet calls -- no functionality change.
1099 kes Modify the Verify output to specify if files are missing on
1100 the Volume(s) or disk. Fixes confusion in bug #916.
1101 kes When more than one Volume is read in a migration job, the last
1102 Volume bytes reported are from the last read volume rather than
1103 the last written volume. Fixed. This fixes bug #910.
1104 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1105 It previously printed New Recyle flag is: no. This fixes bug
1108 kes Correct seg fault when switching tape drives during restore.
1109 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1110 be used until after 2.2.0 release.
1112 kes Remove fnmatch() in SD that permitted wild card specifications.
1113 This fixes bug #914.
1115 kes Fix %g in filename returned by SQL for browse tree reported by
1117 kes Fix configure so that it puts config.out in the cwd rather than
1119 kes Attempt to fix the locking problem reported by Eric in bug #906.
1120 kes Make berrno class to leave errno unchanged after constructor call.
1121 kes Make bnet_server use the heap rather than the stack to allocate
1122 its socket fd pointers to avoid a crash at termination. Problem
1123 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1125 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1126 and putting it in depkgs-qt along with Qt4.3.
1128 kes Rework code in acquire.c that switches drives for reading when
1129 the Media Type does not match. This should fix bug #906
1131 ebl Fix a director segfault during job setup #907
1132 kes Correct seg fault in postgresql when first operation returns no
1133 rows. Fixes Dirks File browser problem seg fault with bat.
1135 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1136 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1139 kes Implement PopUp YES/NO dialog for bat.
1141 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1143 kes Correct RunScript to terminate job in FD on failure.
1144 kes Change abort_on_error and AbortJobOnError to fail_on_error
1145 and FailJobOnError in RunScripts.
1146 kes Minor tweaks of code formating in RunScripts, principally to
1147 avoid depassing 80 columns.
1149 kes Eliminate one #ifdef Win32 in bsmtp
1150 kes Implement grow tool to grow a file for testing very large databases.
1151 kes Add big-vol-test to test Bacula seeking with > 5GB.
1154 kes Modify find_next_volume() to return all values in Media record.
1155 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1159 kes Update Release notes
1161 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1162 Warning, in previous beta version, all media get from scratch keep their
1165 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1166 This should fix bug #842. Made a note to look at removing the temp
1167 files at the end of the install.
1168 kes Add ability to mount and unmount a file device providing it is
1169 marked as being removable and has the appropriate mount and unmount
1170 commands defined in the Device resource. This fixes bug #830.
1171 kes When applying a storage override, release all previous storage
1172 definitions rather than just prepending the new storage.
1173 This should prevent a good deal of confusion.
1175 kes Implement ./configure search for qwt libraries.
1177 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1178 Win32 FD. This should fix bug #893.
1179 kes Remove an unnecessary beep in Win32 init code.
1180 kes Update copyright dates in Win32 executable about boxes.
1181 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1182 code with a BSD getopt.c and getopt.h.
1183 kes Remove sched.h from the Win32 compat directory -- not used.
1184 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1185 need to shut it down, do it through the services panel or the command
1187 kes Remove some inappropriate Bacula FSFE copyrights.
1188 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1189 kes Fix regress config non-portable test as pointed out by
1190 Florian Heigl <florian.heigl@gmail.com>
1191 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1192 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1194 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1195 Reported by Frank Sweetser.
1199 kes Fix client-only build.
1200 kes Integrate client-only fixes for bsys (initgroups) and conio from
1201 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1202 kes Make arguments to get_scratch_volume() in same order as other
1204 kes Rework the prune_volumes() subroutine so that after purging and
1205 no volume found in desired pool, it will check for a scratch
1206 volume. This prevents recycling the whole scratch pool.
1207 kes Add code to status storage to print boffset_t (largefile support).
1209 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1210 kes You now need a --with-qwt=<dir> to be able to build bat.
1211 kes Update src/win32/cats/bacula_cats.def to include the new
1212 db_get_query_dbids() call on Win32.
1214 kes Correct a problem when selecting a scratch volume and moving
1215 it to another pool that lost some columns.
1216 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1217 kes Enhance Autochanger error messages to include Volume and device name.
1218 kes Rework prune_volumes() code to take account of InChanger flag,
1219 and to handle recycling volumes going to the Scratch pool and
1220 current pool because the RecyclePool directive.
1221 kes Implement a better and more efficient db_get_query_dbids() to
1222 handle creating and passing back a list of DBIds.
1226 kes Start work on new more efficient DBId subroutine. First use
1227 will be for recycling volume to Scratch inchanger.
1228 kes Increase number of JobIds in pruning from 1000 to 10000.
1229 This to be replaced by above routine.
1230 kes Begin implementation of building Qt4 on Win32.
1231 kes Correct typo in fix I added for bad TLS shutdown.
1232 kes Pull 2.0.3 patches into patches directory.
1233 kes Update Release notes. Include qt-console in line count.
1234 kes Update Projects file.
1236 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1237 bug in migration code where a job that spanned two volumes
1240 kes Implement new BST_DESPOOLING blocked state. Change from locking
1241 during despooling in SD to blocking. This means that other threads
1242 can work with the device structure, in particular the reservations
1243 system while despooling.
1245 kes Fix return in reservation message queue that missed clearing
1246 the jcr lock (implemented 26Jun07 below).
1247 kes Rename a number of dev methods to make locking function names
1249 kes Document locking in lock.c. Move lock structures to new file
1252 kes Move reservations message lock to lock jcr only this
1254 kes Move main SD locking code into lock.c (new file).
1255 kes Update Win32 build to include lock.c
1259 kes Dirk committed the qwt library code for drawing graphs in bat.
1260 kes Tweak install of qwt so that it is integrated with ./configure.
1262 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1263 out by Eric (my typo).
1264 ebl Fix configure.in to get batch mode enable
1265 kes Return correct string from authenticate.cpp in bat when connecting
1267 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1268 spurious line drops when using TLS.
1269 kes Do not file reparse points when restoring a file that already
1272 kes Implement Windows reparse points -- similar to directories, but
1273 we do not descend into it. This is a first cut. They seem to
1274 be backed up, but restore is not yet tested.
1275 kes Remove restore_blocking in tls code when shutting a socket to leave
1276 it in blocking mode. Hopefully this will fix the encryption bug
1277 reported by Frank Sweetser.
1278 kes When opening a file for backup, tell the OS that we are going to
1279 read it sequentially -- optimization.
1280 kes Change variable names in authenticate_director() to not conflict
1281 with member names in bat. Caused great confusion with compiler,
1284 kes Queue openssl error messages in case of comm problem.
1285 kes Do shutdown() call if socket terminated.
1286 kes Remove some duplicated code in tls.c
1287 kes Move more of the bsock member variables into private and access
1289 kes Add Frank Sweetser's tls-test to the regression suite.
1291 kes Add Swedish sv.po file
1293 kes Don't print clock skew message in FD if less than 3 seconds diff.
1294 kes Add a bit of VSS info to status client.
1295 kes Implement a first cut of Vista VSS, using Win2003 code.
1297 Release: 2.1.20 beta
1299 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1300 loaded tape but uses first drive).
1301 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1302 This was indeed a Win32 issue.
1304 kes Simplify search of autochanger for in-use Volume.
1305 kes Fix exit condition of check for in-use volume. kes Remove
1306 inappropriate my_postgresql_free_result() in db_close()
1308 kes Fix bad return in FD when encryption signature not found.
1309 Probably caused a crash.
1310 kes Inhibit missing encryption signature error messages for
1311 file types where no signature computed.
1312 kes Correct inverted check on autochanger in reservation system.
1313 kes Tweak debug code in autochanger reservation.
1315 kes Add some additional locking in the cats directory in subroutines
1316 that modify packet variables called from batch insert.
1317 kes Rework how dcrs are allocated. new_dcr() can now be called
1318 with an existing pointer, and it will simply clean it up.
1319 This allows the reservation system to test various different
1320 devices, and will permit easy device changes.
1321 kes A bunch of changes all over to handle new new_dcr() calling
1323 kes Work more on the Volume management in the SD. Remember Volumes
1324 for tape drives and for autochangers (even virtual disk changers).
1325 kes When looking at the Volume list to reserve a drive, handle
1326 autochanger names correctly by interating through the changer
1327 devices. Also call the Director to see if a Volume is suitable
1328 for the current job.
1329 kes Fix some bugs in bscan. Make sure all media records are written.
1330 Make sure that valid JobMedia records are written for disk files.
1331 Previously they were completely wrong.
1332 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1333 that the URLs don't change and so that the developers will all
1334 work off the same copy. Rebuild from scrach.
1335 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1337 Release: 2.1.18 beta
1339 kes Fix seg fault in FD from incorrect digest size.
1340 kes Fix argument to non-OpenSSL crypto.c subroutine.
1342 Release: 2.1.16 beta
1344 kes Remove a few malloc()s from the encryption code.
1345 kes Use the class calls to bsock in filed/backup.c and restore.c in
1346 place of the old bnet_xxx code.
1347 kes Implement code that does an on the fly calculation of the
1348 signing digest during restore of encrypted files. It makes
1349 a best guess at the algorithm, and if it is not correct, will
1350 then revert to the old code which reads the file after it is
1352 kes Implement at least one missing crypto stream in stream_to_ascii()
1353 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1354 #877 where a reload with bad syntax causes Dir to exit.
1356 Cut: 2.1.14 beta (not released)
1358 kes Do not free a volume on a tape drive until another volume is
1359 mounted and read, or the autochanger unloads the volume.
1360 This should help the SD re-use volumes that are already mounted,
1361 and should fix bug #886.
1362 kes Apply patch from user brettedgar that allows gnome2-console include
1363 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1364 kes Apply patch from Lucien Weller that fixes day of week calculation
1365 because of DST flag problem. Fixes bug #887.
1367 kes Move find_next_appendable_volume() to after acquiring a valid device
1368 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1370 kes Unable to reproduce bug 872. However added additional testing for
1372 kes Bug #874 resolved by documenting SQLite limitations.
1373 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1374 kes Bug #881 resolved by removing typo in mtx-changer script.
1375 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1376 approval. Added a link to the wiki on the web page, and implemented
1377 a backup from http://paramount.ind.wpi.edu
1379 kes Fix update allfrompool to pass pool name.
1381 kes Convert to pure GPL v2 license.
1382 kes Fix sscanf problems reported by Peter Buschman that caused
1383 a bus error on Solaris.
1384 kes Rework (simplify) the select prompt in bat.
1385 kes Move get_jobid_from_tid() into lib and create a
1387 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1388 should definitely fix the problem of lost error messages in the
1390 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1391 kes Eliminate tcpd.h from the project. Enclose the #include from the
1392 library with extern C ...
1393 kes Add print of signal name when a signal is trapped.
1395 Release: 2.1.12 beta
1397 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1399 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1400 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1401 makes SQLit3 run 30 times faster, though a bit less safe.
1402 kes Implement --with-batch-insert in configure and detection of thread
1403 safe libraries. It is on by default, but turned off if no thread
1404 safe library (e.g. SQLite 2) is available.
1406 kes Fix Bacula PostgreSQL buffer overruns.
1407 kes Do better checking for NULL results returned from PostgreSQL;
1408 implement retry for failed queries; clear results buffer after
1409 failed query. Hopefully this will correct the PostgreSQL failures.
1411 kes Implement algorithm to handle only one appendable volume with
1412 Prefer Mounted Volumes = no.
1413 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1414 returned from a query.
1415 kes Make volume lock recursive.
1416 kes Implement an additional volume reservation algorithm that
1417 starts by considering all reserved volumes then uses the
1418 old brute force algorithm of searching the resources to
1419 find a suitable device.
1420 kes Add new reservations debug code and refine the old code.
1421 kes Update the win32/dll/bacula.defs file.
1423 kes Tweak reservations algorithm to permit a few more cases, i.e.
1424 volume reserved, but on different drive, ...
1425 kes Enhance SD status to include Pool and Media Type for drive in a
1426 more readable format (a bit longer).
1427 kes Fix PostgreSQL double free.
1429 kes Minor refactoring of restore decryption code.
1430 kes Add code to smartall.c to detect double free of a buffer.
1432 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1433 so that bsmtp will create a correct email address (mailbox only).
1434 kes Modify 'memory' command so that the buffers are listed as 'In use'
1435 to avoid confusion with Orphaned buffers.
1436 kes I reworked the OpenSSL include/lib flags to be handled in
1437 the standard Bacula way, which should fix bug #863 concerning
1438 non-standard OpenSSL libraries.
1440 kes Implement Help Browser window for bat.
1441 kes Fix reload bug that reset StorageId to zero.
1443 kes Fix TLS #ifdefing when TLS turned off.
1444 kes Ensure that when labelling a tape with Slot=0 that InChanger
1446 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1448 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1449 add DISTINCT (required by PostgreSQL).
1450 kes Implement BSOCK authenticate_director() method. Eventually will
1451 authenicate all daemons.
1452 kes Move several more functions into the BSOCK class.
1454 kes Add code to tell the OS that we no longer need a cached
1455 file that we were reading. In findlib/bfile.c. Also,
1456 only cache files that we are reading. Thanks to
1457 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1458 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1459 kes Implement script to automatically generate cats and dll .def
1460 files for Win32 dll.
1461 kes Update README.mingw32 to include new .def file generation.
1462 kes Correct typo in UTF-8 error message as reported by:
1463 jhernandez <julianhernandez@gmail.com>
1464 kes Add additional sm_check() code on debug level 1.
1465 kes Set default debug level to 1.
1466 kes Trap SIGABRT in attempt to get traceback.
1468 kes Reduce bat connect timeout from 30 to 15 seconds.
1469 kes More restructuring and implementing BSOCK class in place of
1471 kes Remove a few unnecessary malloc() tests in crypto code.
1472 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1473 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1474 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1476 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1478 kes Fix Verify InitCatalog. The attributes were not pointing to the
1479 correct saved location.
1480 kes Implement message callback so that GUI is sure to get all
1481 daemon messages. Currently displayed in a dialog in bat.
1482 kes Ignore SIGUSR2 (Bacula timer) in bat.
1483 kes Apply regress patch from bug #859 to allow regress to work
1484 with Solaris compiler.
1486 kes Begin adding TLS support to bat.
1487 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1488 clean up lex.c and make it more readable.
1490 kes Move more bnet functions into the BSOCK class.
1491 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1492 kes Complete change of berrno strerror() method to bstrerror()
1494 Release: 2.1.10 beta
1496 kes Cleanup incorrect email addresses in bsmtp.
1497 kes Make bat display initial messages rather than discard them.
1499 kes First cut of adding .mod to the run command.
1500 kes Implement auto display of messages in bat.
1501 kes Enhanced preferences to allow all Bacula output to be
1504 kes Try to make bsmtp date routines more generic.
1505 kes Fixed bug #856 autochanger documentation.
1506 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1507 kes Add new cats entry point so Win32 builds.
1509 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1511 kes Do better checking for the MySQL 64 bit libraries looking for both
1512 .a and .so libraries.
1513 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1514 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1515 kes Require the thread safe version of MySQL during configure. Thanks
1516 to Andre Noll for pointing this out.
1517 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1518 continuing in migration code.
1519 kes Apply implementation of tray-monitor font derived from gnome-console
1520 submitted by Andreas Piesk <a.piesk@gmx.net>
1522 kes Eliminate important memory loss in SQLite
1523 kes Fixed the batch insert MySQL thread specific data that was not
1524 being freed. See cats/mysql.c:db_thread_cleanup().
1525 kes Fix restore before command.
1526 kes Convert old hdr.name to name() in a few places.
1527 kes Implement update jobid command.
1528 kes Return all time_t dates in db_get_job_record()
1529 kes Stop watchdog in SD earlier.
1530 kes Put Pool just after Storage in please mount message.
1531 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1534 kes Update the po files.
1535 kes Fix Verify InitCatalog by making it cache attributes.
1537 kes Change name bacula-bat to bat for man 1 page to correspond to
1539 kes Check for client and store NULL pointers in status command. This
1541 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1542 kes Fix sign extended editing of %p.
1543 kes Clean out a little old #ifdefing in cats/mysql.c
1545 kes If time diff between DIR and FD is more than 600 seconds convert
1546 INFO message to WARNING.
1547 kes Implement heap size display in status for all daemons.
1548 kes Attempt to fix MySQL db open memory loss (not successfull).
1549 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1550 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1551 Query. This looks like a MySQL but but by doing extra releases,
1552 the memory goes away. This should fix bug #847.
1554 kes When backup fails, cancel SD before waiting for sd termination.
1555 kes If SD is waiting for FD to connect during cancel, wake up the
1557 kes Fix fsf code so that errno is correctly reported.
1558 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1560 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1561 so that Bacula doesn't later stumble into a seg fault.
1562 kes Use the term Restore Client in the restore Job report.
1563 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1564 the original job's FileSetId.
1565 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1566 spooling in migration jobs. Not yet tested.
1567 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1568 reading conf file from a pipe. However, do it with open_bpipe()
1569 rather than popen. Not yet tested.
1571 kes Fix an ugly bug where the VolCatBytes were getting updated
1573 kes Implement bconsole memory command that prints current memory
1574 usage, plus smartalloc dump.
1575 kes Clarify some error messages in backup, admin, and migrate.
1576 kes Shrink label dialog to smaller size.
1577 kes Invert Cancel OK buttons on restore to be OK Cancel.
1578 kes More strerror() to bstrerror() conversions.
1580 kes Start implementing bstrerror() in place of strerror().
1581 kes Stripping path -- seems to work.
1583 kes Prevent door and port files from being restored (mostly
1585 kes Free an unreleased buffer in compat code.
1586 kes Change console Job name from *Console* to -Console- to eliminate
1587 Win32 filename problems. Put Win32 path separator when creating
1588 Console file. This fixes bug #846.
1589 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1591 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1593 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1594 to force Win32 error message.
1596 kes First cut strip path. The data should be passed to the FD,
1597 but nothing is done with it yet.
1598 kes Enhance the digest and signature routines in the crypto
1599 library to accept a JCR and to use it to print error messages
1600 so that they will go in the Job report rather than the daemon's
1602 kes Simplify some of the verify signature code.
1603 kes Simplify a few of the alternative returns in the signature
1606 ebl Use only POSIX regex instead of GNU regex in breg.c for
1607 File relocation. It fix broken freebsd compilation.
1608 kes Convert all other Dir files to use new ua class message
1610 kes Tentative fix for missing digest signature in bug 807.
1611 kes Correct handle problem in new win32_ftruncate routine.
1612 kes Convert ua_purge.c and ua_update.c to use new ua class
1613 message routines for bat.
1615 kes Correct incorrect installation of LICENSE in Win32 installer.
1616 kes Display LICENSE at the beginning of the Win32 install.
1617 kes Attempt to correct the need for the png files to be installed
1619 kes Reapply my bat.conf install script in qt-console. I think I
1620 editted bat.pro instead of bat.pro.in and it was lost.
1621 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1622 the /var/lock/subsys for subsysdir. Also corrects typos in the
1625 kes First cut update job.
1626 kes Correct configure to include qmake of src/qt-console directory.
1628 kes Make restore job yes/mod/no print in one command so GUI works.
1629 kes First cut implementing backup and restore client.
1630 kes Correct editing in Verify output that caused a seg fault.
1632 kes Insure that bat.conf is not overwritten during installation.
1633 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1634 while I was implementing migration in March 2006 !
1636 ebl Cleanup file relocation, using char *RegexWhere instead of
1637 char *where + bool where_use_regexp
1638 kes Update some manpages and add bat manpage.
1639 kes Make a first cut at converting bacula.spec.in for bwx-console
1641 kes Apply patch from John Goerzen to add hostname as fourth argument
1642 to make_catalog_backup script.
1643 kes Fix typos I introduced into bsmtp.c
1644 kes Make pm_strxxx() routines handle input of NULL pointer. This
1645 is to protect from NULL pointers returned from SQL databases.
1646 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1647 kes Add more debug to FIFO code -- fix fifo regression test.
1649 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1650 kes Add thread timer to bnet_connect() to break from OS if wait time
1653 kes Update Win32 build to include new files, new symbols, and
1655 kes Implement socket level heartbeat (tcp_keepidle)
1656 ebl Commit File relocation patch
1657 kes Make bat have 'make install' target.
1658 kes Warn during install if old gnome-console binary found.
1659 kes Warn during install if old wx-console binary found.
1660 kes Add -8 option to bsmtp command line to add content type utf-8.
1661 Fixes bug #809. (Character coding problem in bsmtp).
1662 kes If < is found in target (from, to, cc) then do not enclose the
1663 target in < > in bsmtp. Fixes bug #772 (malformed address).
1664 kes When printing certain items in dbcheck, stop after 300000.
1665 Fixes bug #822. (dbcheck loops).
1666 kes Incorrect status in Dir after waiting for mount with poll set.
1669 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1671 kes Print waiting to reserve a device every 5 mins.
1673 kes Don't call close_part in label.c if tape and relabel.
1674 kes Don't free volume if busy in close() -- should help with
1676 ebl Fix #824 RunScript bug (After script could be execute twice)
1677 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1678 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1679 Add a regression script to test RunScript
1681 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1684 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1685 deprecated. No additional bugs will be fixed, and they will be dropped
1686 in a future release (probably 2.4.0).
1687 kes Change name of wx-console to bwx-console to make it more Bacula
1689 kes Change the name of gnome-console to bgnome-console to make it
1692 kes Some time in March, a Feature Request with patch from Jorj Bauer
1693 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1695 The ability for the director to validate a Client (FD) CN against
1696 an arbitrary set of patterns rather than the hostname, with
1697 A new 'TLS Allowed CN' set of directives which are implemented
1698 in the Client resource. Then pattern matching is used in place
1699 of hostname matching against the Certificate's CN. As an example, we
1700 have certificates which (a) use a local CA, and (b) have a CN of the
1702 kes Add new/changed entry points to Win32 build
1703 kes Create unaccepted-projects for projects that are not accepted.
1704 kes Simplify locking in the reservations system.
1705 kes Add more debug code in reservations.
1706 kes Make sure error condition on reserving a volume is handled correctly.
1707 kes Correct handling of volume_in_use.
1708 kes Correct handling of initializing a device.
1709 kes Move handling of broadcasting releasing a device into release_device().
1710 kes Correct attaching dcr to dev so that it is only done if device
1711 is properly initiated.
1713 kes Locking debug level tweaks in SD.
1714 kes Tweak new Volume code.
1716 kes Add exec external-command [wait-seconds] to bconsole. This
1717 executes the external-command. Note! normally external-command
1718 should be enclosed in double quotes.
1719 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1720 it should normally be off in a production system.
1722 kes Implement die command for SD so that we can force it to dump.
1723 kes Implement SD lock debug code.
1724 kes Implement new algorithm for keeping Volume list in SD. It
1725 is now owned by the device.
1727 kes Implement new code for freeing in use volumes that should
1728 resolve if not all, some of the problems of multiple drive
1729 tape conflicts described in bug 801.
1731 kes Fix gui/bacula-web/images files in svn.
1732 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1734 ebl Fix a bug in batch mode (in string escape)
1735 kes Correct migration prune SQL typo that crept in in a
1736 recent 2.1.x change.
1738 kes Move bnet_despool() into class in bsock.c
1739 kes Modify job report to include director name and Build OS.
1740 kes Move drop root privilege and check_catalog() before fork.
1741 kes Add update database scripts (version 9 to 10) to updatedb directory.
1743 ebl Check size and age of each file after its backup to see if
1744 it has changed during backup, if 'checkfilechanges' is set.
1745 The FD will do an extra check (stat(2)) after
1746 each file backup. mtime, ctime and size are compared with
1747 'before backup' information. If time or size mismatch, an
1748 error message will be generated. You must upgrade FD to use it.
1750 kes Make database name and user configurable
1751 --with-db-name=xxx --with-db-user=xxx
1752 kes Add back database type to message.c for debugging.
1754 kes Implement dir_sql() which issues an SQL query.
1755 kes Modify bat medialist to use dir_sql() and do some minor C++
1756 formatting as well as eliminating a number of pointers, simplifing
1759 kes Fix some of the mtx-changer grep commands for tape label readers.
1760 kes Convert a number of bsendmsg into the appropriate send/warning/error
1761 message class calls.
1762 kes Suppress the using database message in the .sql command.
1763 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1765 kes Add context menu for floating a window.
1766 kes Some minor cleanup and name changes in qt-console
1767 kes Add doing mt setblk 0 in Win32 mtx-changer.
1768 kes Apply Martin's bug fix to move definition of ENODATA for
1770 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1771 sqlite2 and sqlite3.
1773 kes More pruning cleanup.
1774 kes Turn on wait_for_drive by default in mtx-changer.
1775 kes Turn on Batch insert code by default as it now passes regression.
1776 kes Add ./configure --enable-bat to enable building of Bat.
1777 No install yet though.
1779 kes Implement a new .sql command for bat.
1780 kes Implement code to turn off pruning in obtaining the next volume.
1781 Pruning is turned off for the status dir command, but turned on
1782 for SD requests and for the list nextvolume command.
1784 kes Correct Qmsg() that was not updated correctly when committing a
1785 previous change (probably the recent TLS patch).
1787 kes Write new subroutine is_volume_purged() that explicitly checks
1788 if the Volume is purged, and if so marks it as such. This should
1789 resolve problems reported about needing to mount twice to recycle
1791 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1792 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1793 amount of duplicated code.
1794 kes Do volume pruning only for the Media Type desired (reduces pruning time
1795 if multiple Media Types are in the same pool).
1796 kes Implement more detailed info in the Job report for the Bacula version
1798 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1800 ebl Add bbatch tool to bench database and insert mode.
1801 Fix sql quote stuff in batch mode
1802 Fix sql stuff for mysql
1804 kes Correct problems with am/pm scheduling. Fixes bug #808.
1805 kes Implement new prunning code that prunes up to 1000 jobs at
1806 the same time. The same technique can be applied to a number
1807 of other prune/purge subroutines.
1808 kes Add an insanity check when starting a new tape job to ensure
1809 that the tape position has not been changed. If so fail the
1811 kes Fix Win32 build for dlls to add the folllowing:
1812 src/lib/bsock.c -- new file with new entry points
1813 src/lib/dlist.c -- new entry points
1814 src/cats/sql_create.c -- new entry point
1815 src/cats/sql_cmds.c -- new DATA item exported
1817 ebl batch mode cleanup bscan-test is ok now.
1818 kes Implement SD code to check length of disk volume before appending.
1820 kes Correct return status on db_batch... routines.
1821 kes Add call to db_write_batch_file_records() to migration code.
1822 ebl Fix AfterJob timing
1823 kes Move the checking of the database in initializion of the Director
1824 to after we drop privileges. This avoids the need for both root
1825 and bacula access to the DB.
1826 kes Correct a misplaced variable definition in src/filed/backup.c
1827 kes Correct how the new batch insert db_create_attributes_record()
1828 uses the arguments. Caused a seg fault in bscan.
1829 kes Implement lock() and unlock() methods in DEVICE class.
1830 Implement block() and set_block(xx) methods in DEVICE class.
1831 kes Modify bnet_connect() so that it uses time() to check for the
1832 wait time expiring (on some OSes, some system calls may not
1833 return immediately).
1834 kes Modify Verify to obtain the previous JobId when it is actually
1835 running rather than at schedule time (as it was in 1.38.x).
1836 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1838 kes When checking pid in pid file, continue running if the pid is
1839 the same as ours. This occurs on IRIX after a system crash.
1842 kes Extend new GUI API.
1843 kes Make the ua structure a class, and implement send_msg(),
1844 error_msg(), warning_msg(), and info_msg().
1846 kes Apply fix from for building wx-console on the Mac from
1848 kes Implement new select mechanism for GUI programs.
1849 kes Reorganize initialization of stackedWidgets in bat.
1851 kes Add updated nagios plugin supplied by Christian Masopust.
1853 kes More bat implementation.
1854 kes File migrate bug with Pool Occupancy using mediaid instead
1855 of jobids. Fixes bug #795.
1856 kes Fix orphaned buffers in filed backup and verify due to
1857 crypto buffers not freed during errors. Fixes bug #789.
1858 kes Extend new GUI api code to tree commands.
1859 kes Ensure that tree and dot commands check console ACLs.
1860 kes Permit marking directory with trailing slash.
1861 kes Allow 20 console connections (instead of only 10).
1863 kes Add smartctl call to bacula-sd.conf as an example of getting
1866 kes Modify jobq.c to let simultaneous restore jobs run. This may
1867 cause them to fail if they cannot get a drive.
1868 kes Add Client Connect Wait to Storage daemon to permit users to
1869 modify the time the SD waits for a FD connection.
1871 kes Correct virtual changer check which was backwards. This caused
1872 volumes to be unloaded into slots already occupied.
1874 kes Apply Command ACL filter to JobId list in restore command.
1875 kes Correct typeo in var.c patch.
1877 kes Don't let Bacula prune File or Job records for the current Job.
1878 kes Fix variable substitution pad + inc bug reported (with patch)
1881 kes Correct SQLite log table index as reported by Luca Berra.
1883 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1885 kes Begin implementing new comm signals for API.
1886 kes Fix a few places in lib/message.c where the open fd may
1888 kes Continue implementing lib/bsock.c (real class). Make jcr,
1889 who, host, and port private. There are new methods to access
1890 them for non-class use. This required touching a number of files.
1892 kes Add LANG=C to autoconf/randpass so it works with languages other
1893 than English. Fixes bug #788.
1895 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1897 You will not be able to generate Include/Exclude list any more.
1898 It will be fixed soon.
1899 If you want to use this, you can apply
1900 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1902 kes Restore of sockets created false error messages because Bacula
1903 no longer restores sockets, but the code was still trying to
1904 set the attributes on a non-existent file. Reported by a user.
1905 ebl finish RecyclePool feature
1906 Media will takes Pool.RecyclePool
1907 when moving from Scratch to a Pool or when user will do
1908 update volume=xxx frompool
1909 To use it, add RecyclePool = aPool to your Pool resource
1912 RecyclePool = Scratch
1916 kes Expand new BSOCK class adding signal() and new BNET signals.
1917 kes Begin enhancing the dot commands adding a new API function
1918 that returns more information and will make it easier
1919 to interface to the Director from a program.
1921 kes Make DEVICE fd private. Its new name is m_fd, and can be
1922 obtained with dev->fd() outside the class. This is the
1923 first of many DEVICE members to be made private.
1924 kes Implement Michael Renner's idea on having a virtual disk
1925 changer. I made some minor modifications (e.g. I did not
1926 implement the Virtual Changer directive, but simply set
1927 the Changer Command to an empty string.
1929 kes Implement a BSOCK send() method that writes the whole record
1930 in a single write() request rather than in two.
1931 ebl add update volume=xxx recyclepool=yyyy
1932 volume takes recyclepool from pool when using update volume=xxx from pool
1934 kes Fix encryption deblocking bug, which caused some restored files
1935 to be truncated. This fixes bug #763.
1936 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1937 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1939 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1940 ebl Use btime_t instead of uint64_t in media patch.
1942 kes Optimize the use of the database a bit in the Status dir command.
1943 Only open it when needed, ensure that if any previous database
1944 was opened, it is closed.
1946 kes Correct VolCatBytes bug from media patch.
1947 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1948 in the case of orphaned records.
1949 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1950 and File records in 300K chunks to be more efficient. This
1951 idea came from Juan Luis Frances (if I remember right).
1952 kes Apply Eric's scratch patch that moves a purged Volume to
1953 the RecyclePool. Question: how is RecyclePool set? what
1954 happens to the ScratchPool?
1955 kes Apply Eric's media patch that collects read/write media
1956 times as well as byte counts. This patch requires a
1957 simultaneous upgrade of the DIR and SD. Note, there
1958 should be some way to turn off timing. I'm not sure
1959 times are in Bacula units.
1960 kes Apply Eric's batch-insert patch.
1962 kes Update projects list.
1964 kes Implement Include/Exclude file lists in FD as dlists using
1965 the new dlistString class. This permits efficiently having
1966 large include/exclude lists and completes project Item 25.
1967 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1968 console is authorized to cancel the job. This fixes bug
1970 kes Modify SD so that the VolCatJobs medium record is updated
1971 at the beginning of a Job rather than the end. This
1972 fixes bug #775 where exceeding MaxVolJobs caused jobs
1974 kes Added a mutex around getting and setting Volume information
1975 so that multiple simultaneous jobs will single thread.
1977 Switch to using Subversion
1978 kes Remove src/pygtk-console/ from configure
1980 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1981 plus the entrypoints.
1982 kes Apply patch supplied that corrects debug print
1983 in canceling jobs for max run time. Supplied as
1984 part of bug #621, which was previously fixed.
1986 kes Test on job_canceled() and sd_msg_thread_done inside
1987 loop starting the message thread to avoid a race condition.
1989 kes Remove rl_catch_signal from console.c as it conflicted
1990 with the header definition. Fixes bug #765.
1991 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1993 kes Clarify some stored/acquire messages to indicate if the
1994 problem is with read or append.
1996 kes Fix memory leak with storage ids in cats/sql_get.c
1997 kes Terminate watchdog earlier to avoid reference to released
1998 memory -- reported by Jason Austin.
1999 kes Move closing the database from jobq.c to the director daemon
2000 termination routine. This fixes memory leaks for shadow jobs
2001 (i.e. migration jobs).
2002 kes Free up the unique jobid chain items in migrate.c. This fixes
2003 a memory leak problem.
2004 kes Convert some ugly looking for statements to use foreach_alist
2005 in findlib/find.c. This will facilitate converting the structures
2006 to use dlist (for large include/exclude lists).
2007 kes Fix a bug in the btree.c and btree.h routines, then rename them
2008 rblist and add them to be built in src/lib. Include some new
2009 methods written by Rudolf Cejka that make the code more readable
2010 (hides some of the ugly casting).
2011 kes Add set_next() and set_prev() methods which make the code much more
2012 readable. Also add a new dlistString class that facilitates storing
2013 strings in dlists. To be used in the large include/exclude lists.
2014 kes Make some trivial modifications to lib/tree.h that use rblist
2015 rather than dlist for storing the tree links. This was suggested
2016 by Rudolf Cejka. The result of this is that the restore tree now
2017 uses red-black binary trees rather than simple linked lists. This
2018 should give rather dramatic speed improvements for directories
2019 contining large numbers of directories/files (more than 10000).
2021 kes Fix maxruntime bug #621.
2023 ebl Implement the include JobID in spool file name project.
2024 kes Reorder projects file in order determined by Jan 2007 vote.
2025 kes Implement item #12 on project list -- quick release of FD by
2027 kes Fix open of SQLite3 db where user does not have write permission
2028 so that DIR does not crash. Fixes bug #761.
2030 kes Add back missing @ in Win32 Makefile.
2031 kes Change 'Device not configured to autolabel' from INFO
2033 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2034 which should restart an indefinite # of times.
2035 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2036 other DIR specifications.
2038 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2039 Fix path quoting in SQLite scripts.
2040 Fix problems with SHGetFolderPath.
2042 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2044 kes Fix Job restart on error bug that promotes an Inc to a Full
2045 backup. This should fix bug #755.
2046 kes Add qt-console and first cut of code.
2050 kes Fix Bacula->Documentation link on Win32 to point to index.html
2051 instead of bacula.html. Fixed bug #750.
2052 kes Return JobId in db_get_job_record() when JobId==0. This should
2054 kes Do not release source pointers when restarting a failed job.
2056 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2057 This *should* fix bug #747.
2058 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2061 kes Modify USTORE constructor to set an empty store_source string,
2062 and don't copy the store_source string in a cancel. Hopefully
2063 this will fix Arno's seg fault, bug #744.
2064 kes Add back code to disable conio in configure. Fixes bug #743.
2065 kes Correct the Options scanner in the FD to correctly handle
2066 SHA1 option, which was eating the next option. Reported by
2068 kes Add code to indicate when the SD is spooling, spool wait, and
2069 despooling as requested by Alan Brown.
2071 Version 2.0.0 released: 4 January 2007