1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
31 separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
36 kes Remove debug statement that crashes the SD at the end of
37 a tape during restore. Fixes bug #1125.
39 kes Implement Win32 bat changes made to Branch-2.4
41 kes Tweak separator command in console to start disabled and
42 allow defining no separator character. Also make code a
43 bit more fault tolerant.
44 kes Make btraceback write the traceback to the working directory
45 before attempting to mail it.
46 kes Add a RFC to Projects.
48 kes Attempt to implement a kludge to make Qt work with bat
50 kes Setup rstorage correctly. Virtual backups are working.
52 kes Move setting JobLevel and JobType into a method, which should
53 allow completing Virtual Backups.
54 kes Fix verify jobs to work again.
56 kes Virtual Backup tweaks -- it is close to working.
58 kes Ensure that SD tried to mount a volume not in an autochanger
59 at least once before asking for operator intervention.
60 kes Make SD aware of Virtual Backup jobs.
61 kes Add VirtualFull for bat.
62 kes Changes to get read storage correct for Virtual Backup.
64 kes Remove old code from label.c
65 kes Split display_display_info() out of write_bsr_file()
66 kes do_vbackup_init() working -- i.e. bootstrap file built.
67 kes Change Bacula trademark owner from John Walker to Kern Sibbald
68 kes First non-working cut of vbackup
69 kes Correct FD heartbeat code to use volatile variable accessed by
71 kes Zero thread id with memset if on Win32 in case it is a struct.
72 kes If cannot create JobMedia record, continue to try to write eof
73 and clean up in block.c
75 kes Add code to interface OpenSSL to new Win32 pthreads code which
76 used a structure for thread_t.
78 ebl tweak bat for win32 compilation
80 ebl Remove tokyo cabinet from the source
81 ebl Update configure/autoconf to support berkeley DB
82 ebl Add a sort to db_get_file_list() to improve bsr construction time.
84 kes Add a mtx-changer.conf file that is not overwritten during
85 an upgrade. It fully configures the mtx-changer script.
86 kes Clear in-use bit on vol when unused while swapping.
88 kes Remove sleep at end of ./bacula
89 kes Clear hash packet for hardlinked files correctly. This corrects
90 a long standing bug where hardlinked files selected individually
91 would occasionally not be restored.
93 kes Apply Eric's patch to ensure that autoprune does not return
94 a Volume not in the autochanger unless requested to do so.
95 kes Correct bat restore display of multiple drives. This fixes
97 kes Do find_a_volume() each time an unload is done. This
98 fixes the failure of maxvol2-test.
100 kes Add some SD debug code.
101 kes Do find_a_volume() each time an unload is done.
102 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
103 and adds --with-db-port to ./configure.
104 kes Use Qmsg() in job.c watchdog callback.
106 kes Release main control rwlock if ABORTing.
107 kes Make watchdog connect timeout queue messages rather than sending
108 directly to avoid lock conflicts with the real thread.
109 kes Add const char in dbd.c to avoid compiler warnings.
110 kes Fix python compiler string warning. Note, IMO the GNU C++
111 compiler guys have made a *very* bad change to their compiler.
112 They now force all strings to be 'const' unless you explicitly
113 cast them, which is extremely ugly and ruins nice code as well
114 as creates a lot of useless work.
116 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
117 mt. This fixes bug #1116.
118 kes Add const in python files to reduce compiler warnings.
119 This may have to be backed out because of later compiler
121 kes Fix failure of 2drive-concurrent-test. Always read label;
122 clear_unload() only after drive is defined in acquire_for_read().
124 kes Generally clean up the manual tape loading code. The main
125 conceptual change is that when a volume is marked to be unloaded,
126 its volume name is retained, and it is only marked as unloaded
127 when either the autoloader says it is unloaded or another tape
128 is read on that drive.
130 kes Add debug code and refactor subroutine in stored/mount.c
131 kes Fix format problem in bscan output reported in bug #1105.
132 ebl Fix get_next_volume_for_append logic with autochanger
133 - use pruned volumes if found
134 - don't reset the inchanger flag after getting a recycled volume
136 Fix recycle_oldest_purged_volume to take InChanger flag in account
138 ebl Add mmap/unmmap implementation for tokyodbm under win32
140 kes Make first step toward eliminating globals from config
141 scanning. Also should be a workaround for FORTIFY_SOURCE
142 GNU C bug -- fixes bug #1042.
144 kes Apply duplicate job tests to restarted jobs.
145 kes Copy more data when restarting a job so that run
146 overrides are kept. This should fix bug #1094.
148 kes More word alignment cleanup.
149 kes Fix bug where SD did not ask operator if the device could not
150 be opened. Reported by Eric.
152 kes Add dbuser to DIR conf file (replaces user).
153 kes Add --with-db-password to ./configure
154 kes Fix regress to handle db_password.
155 ebl Add new "status storage slots" that list autochanger
157 ebl Update vtape driver to compile only under Linux.
158 ebl Fix a bug when restoring with a wrong mediatype.
160 kes Eliminate ints from conf files and structures to avoid
161 word alignment problems
163 kes Fix bug reported by Scott Barninger where the bacula script
164 refers to scripts in the wrong directory. Needed to meet the
165 requirements of recent FHS location changes.
166 ebl Disable vtape for FreeBSD.
168 ebl Modify disk-changer to check if slot contains something before
171 ebl Fix vtape on win32 and debian.
172 ebl Fix autoselect patch (cause segfault).
174 ebl Fix autoselect option broken for a while. Fix #1089. Need some
175 work with StorageId to be able to use a particular drive in a
178 ebl Rename vtape to vtape.
179 ebl Update vtape driver.
181 ebl Modify vtape driver to avoid sparse file.
182 kes Add make clean of qt-source directory during ./configure
183 kes Store last block number written to tape in DEVICE and
184 use it for testing for correct last block on EOT.
186 Release Version 2.4.0:
190 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
191 This fixes bug #1095.
193 kes Add create_postgresql_database.sql to Win32 installer. Should
194 fix problem reported by Juilio Monteiro.
195 kes Get correct slot when auto unloading a device. This fixes bug
198 kes Fix multiple media restore.
199 kes Make DEVICE Slot private and access it via a method.
200 Allows better control over when it is set and cleared.
201 kes Fix possible seg fault if SQL error.
203 kes Add Martin's fixes to argument scanning for the estimate
204 command. This fixes bug #1093.
205 kes Add debug code to SD.
206 kes Fix renaming a Volume, which used the wrong Volume name.
208 kes If operator has rewind tape, print warning, release tape and
209 try once more. If tape is positioned somewhere, something went
210 wrong, so mark the tape in error and try once more. Previously
211 this error was fatal, now it produces an error message.
212 kes Ensure correct volume name displayed during restore
213 kes Ensure that Volume is mounted for restore.
215 kes Fix a few more Coverity reported problems.
217 kes Apply Allan Black's status dir job count patch.
218 ebl Add information about IMPORT/EXPORT slots in mtx-script.
219 kes Enhance a couple of SD debug messages.
220 kes Tweak unload flag setting and ensure it is set during swap.
222 ebl Fix #1091 about bad output in estimate command.
224 kes Modify autochanger locking to attempt to avoid race
226 kes Make sure device not busy before doing label command.
227 kes Display open() errors except when polling. Previously too
228 many were suppressed. This should fix bug #1070.
229 kes Fix Win32 reparse points. Bacula will not recurse into any
230 reparse point directory, including mount points, unless the
231 directory is explicitly mentioned at the top level (same as
232 with Unix). A file that is linked to another file will be
233 backed up -- much as Unix does for hardlinked files.
234 This fixes bug #1041.
236 kes Remove double quotes from ChangeLog and ReleaseNotes
237 kes Remove StorageId test when pruning and recycling (Eric's changes).
238 kes Remove old form of locking when getting volumes -- causes deadlock.
239 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
240 the name unique and to eliminate compile time error.
241 kes Add accurate.o to Win32 FD Makefile
243 kes Fix cats dll build on Win32 after db_update_job_end_record
244 calling sequence change.
245 ebl Switch to tokyo dbm instead of htable in accurate code
246 ebl Include tokyo dbm to bacula source tree
248 kes Fix buffer overruns detected by Coverity.
250 kes Tweak joblog display.
252 kes Implement --without-qwt
253 kes Fix layout of restore tree dialog
254 kes Add configure bat QWT libraries, so that bat can be built
255 with or without the QWT libaries.
257 ebl Add dummy tape driver for regression tests.
258 kes Make sure we unload the right slot when swapping.
260 kes Add debug times, reduce size of two-pool-changer test
262 ebl Tweak autoconf scripts for vtape
264 kes Improve SD reserve debug code.
265 kes Testing an improvement to free up volumes no longer in use.
267 kes Rework SD acquire for read to handle autochanger Volume
269 kes Implement regression that explicitly tests swapping a Volume
270 from one drive to another.
271 kes Enhance disk-changer to detect most error conditions.
272 kes Fix SD code so that it properly swaps a Volume between drives.
273 This fixes bug #1083.
275 kes Apply libdbi patch from Joao Freitas for regress and for
276 Bacula trunk. Regress now works with libdbi. Nice.
277 kes Apply .nobackup patch from bug #1077 submitted by
279 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
280 name into jobs cloned via the run directive.
282 kes Prevent a Volume that is being swapped from being freed from
283 the volume list. This will most likely fix, at least partially,
285 kes Fix strippath so that it does not get a buffer overrun and crash FD.
286 This fixes bug #1078.
287 kes Remove 50 millisec wait in SD that broke debugger.
288 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
289 that a job may run, counted from when the job was scheduled.
290 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
291 a job may block waiting for a resource, counted from when the job starts
292 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
293 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
294 that implements multiple commands per line in the console when using
295 readline. Modify the default to use a semicolon as the command separator.
297 ebl Fix SQL query in migration code.
298 ebl Make accurate mode with hash disk pass regression tests
300 ebl Implement first cut of accurate backup with hash disk.
302 kes Force unload of volume when wrong volume mounted in SD.
304 kes Fix bat seg fault at termination.
305 kes Add Bacula generated version to bat about box.
308 kes Experiment with allowing multiple read jobs.
309 kes Move final volume swapping code to DCR method and
310 call it from acquire_for_read().
311 kes When wrong volume is mounted during read, unload_autochanger.
313 kes Integrate the libdbi changes from Joao Henrique Freitas
315 kes Stop searching for Volumes in SD askdir if DIR returns the
316 same volume name twice in a row.
317 kes Close bat console windows first to eliminate error message
320 kes Tweak the swap Volume from one drive to another code so that
321 it now seems to work.
322 kes Resolve several problems with recycling that broke the new
323 code (these problems are in 2.2.9 as well).
324 kes Remove the volume lock when calling the sysop code.
325 kes Don't mark a reserved volume with no writers as unused otherwise
328 kes Rework class structures for VOLRES, DCR, and DEVICE to make
329 the method names a bit more logical, and for more logically
330 handling the responsibilities.
332 kes Remove redundant code in terminating the scheduler that just
333 causes a seg fault in many cases.
334 kes Cleanup releasing a volume and make it a DCR method.
335 kes Improve algorithm for detecting pre-reserved volume and
338 kes Tweak volume swapping code so it works.
339 kes Correct name overloading in mount.c
340 kes Replace released flag in VOLRES with reserved and add access
341 methods for the VOLRES class.
342 kes Prevent volume from being released while being swapped.
343 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
345 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
347 kes Refactor parts of stored/mount.c
349 ebl Add sanity checks for VolWriteTime and VolReadTime
350 ebl Take care of bad clock changes while computing VolWriteTime
351 and VolReadTime. This should fix or limit #1066
352 kes Correct error string numbers in dird/catreq.c
353 kes Restructure reserving, acquiring, and mounting volumes. Calls to
354 autochanger are deferred for mount.c -- simplifes the code.
356 kes Do not prune any running job. It just fails the job.
357 kes Lock the volumes when changing dev->reserved_device and marking
358 the volume unused otherwise the device can get reserved by
359 another job before the volume is released, thus blocking it.
361 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
362 kes Fix bug #1063, reuse of freed ptr in list nextvol.
363 kes Release regex compile buffer in filed/job.c
364 kes Add proper type of const char in sql_create.c
365 kes Turn off debug in daemon termination routines
366 kes Move free_volume_list() before devices are freed in stored.c
367 kes Fix reference to uninitalized stack variables in bregex.c.
368 This should correct bug #1067.
370 kes Fix possible seg fault in SD when freeing a volume entry.
372 kes Implement unload_dev() before swap device.
373 ebl Add statistics prunning with option and menu
374 kes Separate unload_dev() from unload_other_device() in autochanger.c
376 kes Apply patch from bug #1069 that corrects spurious error messages
377 when ACLs enabled on SGI but no ACL exists.
378 ebl Fix small segfault in bacula-sd when debug level is 500
379 kes Modify run_program() and run_program_full_output() to use
380 call by reference for the results string. This corrects a long
381 standing problem where the address of the string may be changed
382 in the subroutine but not in the calling program.
384 kes Re-enable code to remember last volume mounted on a non-tape
386 kes Add patch supplied in bug #1068 that fixes a SD crash when using
387 a Virtual autochanger.
388 kes Generate correct JobMedia records during spooling/despooling when
389 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
390 <tih@hamartun.priv.no> for excellent analysis and testing.
392 kes Tweak hash algorithm for htable using Martin Simmons idea
393 for doing a circular shift.
394 kes Remember what volume is in VTLs (previously turned off for
396 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
397 pointed out some problems in creating JobMedia records during
398 spooling with concurrent jobs. Fix the problem by updating the
399 start file position before despooling and generate a jobmedia
400 record at the end of despooling.
402 kes Fix handling of JobMedia records during spooling and when a
403 Volume is changed without actually writing data to the Volume.
405 kes Rework certain SD locking based on gdb tracebacks of deadlocks
406 sent by Eric. This code now uses only the volume_lock() rather
407 than the reservations lock when at EOM and acquiring a new
409 kes Ensure only one exit point in several subroutines.
411 kes Implement bsock code to permit locking. Use the new code in Verify
412 in the FD to prevent the heartbeat thread from disrupting the Verify
413 data sent to the Dir.
414 kes Modify SD locking to eliminate locking the reservations system from
415 outside the system. Use the volume lock when getting media data
416 and reserving a new volume at end of media.
417 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
418 when SD starts are not locked into place.
420 kes Fix error compiling runscript code on 64 bit machines.
421 kes Tweak Win32 mount point code.
422 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
423 cleared giving bad file estimate).
424 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
427 kes Keep Schedule run lists in order as suggested by
430 kes Implement autostart scripts for Debian.
431 ebl Implement upgrade catalog scripts.
433 ebl Apply jobstat patch for long term statistics. Have to implement
434 purge stats command and upgrade scripts.
435 kes Fix mtx-changer.in for broken Debian mt program.
437 kes Fix large number of JobMedia records reported by Eric Bollengier.
439 kes Apply doc fix from bug #1062.
440 kes Resolve crash and improper restore wx-console Win32 restore
441 GUI. Fixes bug #1065.
442 kes Update Win32 wxWidgets to latest version.
443 kes Attempt to do correct handling of Win32 mount points. Should
445 kes Fix Win32 FD backup/restore memory leak due to improper termination
446 of BackupRead/Write. This fixes bug# 1038.
448 ebl Reduce memory usage for accurate backup, working only with ctime
449 and mtime. (not all Lstat field)
450 About 40MB for my Linux system (400.000 files)
452 kes Add dcr->reserved_volume flag that allows us to release a volume
453 even if it is not vol->released. This allows maxvol2 to work when
454 Volumes expire and we are already writing to the device (i.e. a
455 volume is pulled out from under us by another job terminating after
456 we reserve the drive).
458 ebl Permit multiple command/console per runscript definition.
459 RunScript { command = /bin/true ; command = /bin/false ... }
460 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
461 (restart an application) just after the VSS snapshot on windows.
462 kes Don't zap dcr values during release_volume() as they might
463 have the next Volume to be mounted.
464 kes Fix AIX prototype.
466 kes Second cut of drive switching during backup.
469 kes Update Win32 version of wxWidgets to most recent version.
470 kes Tweak Copy job details.
471 kes Rework dir_find_next_appendable_volume to make a bit more effort
472 to find a suitable volume before giving up.
474 kes Make ask_sysop_to_create... to return if waken from wait.
475 This helps get out of blocked conditions.
476 kes Experimental implementation of switch_device in reservations.
477 kes Implement FD version to allow easier protocol changes.
478 kes Add Plugin Options string -- not yet passed to FD.
479 kes Implement PluginOptions ACL.
481 kes Attempt to correct problems with restores with autochangers and
482 use counts going negative
483 kes Rework SD status command and implement API for bat. Implements
484 header, runing waitreservation, devices, volumes, spooling,
485 and terminated status keywords.
486 .status storage=xxx <keyword>
487 kes Clarify TLS error message by adding double quotes around name.
488 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
489 kes Pass jcr to tls routines so debug messages can be handled better.
490 kes Rework jobq resource allocation code, and possibly fix a bug
491 that caused reference counts to get out of sync.
493 kes Rename fd/dir plugin to use Bacula standard underscore.
494 kes Plugin work -- bring dir up to fd level.
495 kes Start implementation of VTL code
496 kes Fix Win32 build after adding new cats subroutine.
498 kes First cut at Duplicate Job implementation.
500 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
501 kes Start PluginOptions string, and refactor a bit of ua_run.c
502 ebl Apply Allan patch that permit to reset recyclepool.
504 kes Test patch -- possible fix or improvement for bug #1053
505 kes Refactor FD and SD status commands to permit new API code in
506 SD, and to fix Win32 build.
507 kes Win32 build is now working.
509 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
510 some ideas in patch from Scott Bailey.
511 kes Begin implementation of duplicate Job control.
512 kes Fix some of Win32 build after recent additions.
513 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
514 which causes the FD to detect whether or not the OS has the
515 honor no dump bit (*BSD systems), and if so, to skip backing up
516 any file with this bit set. The feature is enabled by setting
517 'honor no dump flag = yes' in the Options section of a FileSet.
519 kes Correct po warning message with datarootdir
520 kes Implement more code in dird.c to put configuration parsing in
521 a class rather than use globals.
522 kes Restructure SD status command for implementation of bat API
525 kes Suppress incorrect 'Will not descend from x into y' messages.
526 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
527 daemon globals used by parser.
528 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
530 kes Fix free of plugin_list when none exists.
532 ebl Apply accurate project patch.
534 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
535 on non-mempool object)
536 kes First cut of converting FD .status to work with bat API.
538 .status client=XXX header
539 .status client=XXX running
540 .status client=XXX terminated
541 kes Implement first cut of Copy Job.
542 kes Implement Catalog in Pool resource. It overrides catalog specified
543 in the Client resource.
545 kes Apply patch (with some difficulties) from Joao Henrique Freitas
546 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
548 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
549 ftruncate() actually works. In the case of some (cheap) NAS devices,
550 it does not, and so recycling NAS Volumes does not work. The code
551 simply unlink()s the file, then recreates it. This fixes bug #1011.
553 kes First incomplete cut of big malloc blocks for htable.
554 kes Tweak plugin code.
556 kes Plugin debug code + tweak a couple bat dialog layouts
558 kes Fix creating first JobMedia record during Migration to include
559 proper index. This caused slow restores of migrated jobs.
560 kes Temp fix to plugin name file_index.
561 kes Bacula backed up and restored a MySQL database.
563 kes Implement plugin restore.
564 kes Implement parsing of db_driver to give db_type index.
566 kes First cut of plugin restore code.
567 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
568 and do not strip paths on symbolic links.
569 kes Set catalog backup database and user name from values specified on
570 the ./configure line.
571 ebl Fix #1031 about wrong pool source information in job report.
574 kes Remove a redundant jcr argument to find_files, match_files, and
576 kes Implement '.status dir header|scheduled|running|terminated' that
577 prints the requested status section. With the exception of the
578 header, the other reports have fields separated by tabs (\t).
580 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
581 a resource embedded run command to find a since time if no explicit
582 since time was supplied on the command line.
583 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
584 that updates the state file at job termination time in addition to
585 when the daemon terminates.
587 kes First version where a plugin did a backup.
588 bpipe-fd.so created a backup file, wrote a test
589 string to it, and Bacua could restore this fabricated file.
591 kes Implement DB Driver = string for the DBI driver.
592 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
593 kes First cut of code for loading Win32 plugin dlls. Implement
594 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
595 and implement a dlfcn.h file based on opengroup's definitions of
598 kes First cut plugin directives.
600 kes Apply patch from bug #1049 to prevent stripping the path on a
602 kes Attempt to fix bug #1047 where stripping a path corrupts the
603 heap. Waiting for feedback.
604 kes Correct the Mount message not to suggest labeling a new tape
605 when doing a restore. Submitted by email by John Stoffel.
606 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
607 FD by using casting. Reported in bug #1042.
609 kes A bit of crypto cleanup. More later.
611 Release Version 2.2.8
613 kes Apply patch from Martin to correct bug #1040, bscan sets existing
615 kes Fixed important spelling error in doc -- bug #1045.
617 ebl Fix bextract to be able to extract non-portable Win32 data to
619 kes Move initialization of read/write res lock earlier in the code.
620 This fixes the crash with a null conf file. This fixes bug
622 kes Redefine CURES in lib/parse_conf to be URES and move it all
623 into lib/parse_conf.c -- this responds to bug #1042, but does
624 not fix it. The fix is not to compile with FORTIFY_SOURCE.
625 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
626 the trunk SVN. I don't think this was reported as a bug.
628 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
630 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
632 kes Add DataDespooling and DataCommitting status (committing is
633 the last despooling).
634 kes Finish implementation of new reservations code noted below.
636 kes Fix bsnprintf for float point numbers. I broke recently when
637 parameterizing some variables. This fixes bug #1036.
638 kes Undo recent reservations changes ... will apply them later
639 when they work better.
641 ebl Fixes #1034 which cause mysql to hang the connection after 8h
642 ebl Change default statistics target of filename.name and path.path
643 fields for PostgreSQL. This speeds lookup by indexes. Thanks
645 kes A few more tweaks to new reservation code. Make sure to clear
646 vol released flag when retaking volume. When reading label and
647 label is bad mark volume unused. When recycling, mark volume
648 unused so it can be renamed.
650 kes Fix reserve_volume() so it doesn't release a volume in use
651 (i.e. a volume entry not marked released). This should be
652 the last part needed to fix bug #1018.
654 kes Move Heartbeat documentation from Job to Director resource.
655 This fixes bug #1033.
657 kes Fix existing switch drive SD code to call autochanger to release
658 any old volume. This must be done to keep the autochanger from
659 releasing subsequently newly reserved volumes in doing a close().
660 This should fix bug #1018.
661 kes Fail if attempting to get console input in batch mode. This
662 should help fail RunScript console commands that are incomplete.
663 kes First cut implementing switch_drive() in SD (not actually called).
665 kes Implement first cut running console commands in a RunScript.
667 ebl Fixes bug #1028 where 'Selection Type' option was not usable
669 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
672 Release Version 2.2.7
674 kes Add new free_tls() entry point so that Win32 builds.
675 kes Fix compile warning in src/lib/util.c
676 kes Fix entry point for edit_job_codes() so that Win32 builds.
677 kes Fix seg fault Frank Sweetser reports in regression testing
678 on his systems. The problem was that the original author of
679 bsnprintf.c did not take into account the side effects of
680 using ++x in the argument to a #define.
681 kes Make SD protocol backward compatible with version 2.2.x.
683 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
684 because Bacula no longer restores sockets.
685 ebl Always use ignorecase fileset option on win32 FD.
687 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
688 that implements double quoting include names in conf files,
689 and also allows piping input by having the first character
690 be a vertical bar (|).
691 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
692 that implement %f in RunScripts to pass the FileSet name.
693 kes Skip leading | when lex input comes from a pipe as suggested
694 by Michael Stapelberg <michael@stapelberg.de>.
696 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
697 Nerijus Baliunas <nerijus@users.sourceforge.net>
699 kes Implement Plugin Directory and plugin events.
701 kes Implement a security enhancement: TLS authentication but no
702 encryption. Enabled by setting 'TLS Authentication = yes'.
703 Note when this is on, TLS encryption is turned OFF!
705 kes This patch corrects a problem where the maximum concurrent storage
706 jobs counter gets out of sync during restore jobs causing jobs to
707 'wait on max Storage jobs'. This patch fixes bug #1009.
709 kes This patch fixes bcopy so that it produces correct Volumes.
711 kes This patch eliminates spurious output to the console during a VerifyVolume
712 job that contains encrypted data. It fixes bug #1024.
714 kes This patch prevents the 'status dir' command from trying to use a scratch
715 volume and possibly moving it from one pool to another. This patch fixes
718 kes Add new include to postgresql.c suggested by Marc Cousins so
719 that it compiles correctly with pgre version 8.3.
721 kes Fix --archivedir addition to configure. Replace it with
722 --with-archivedir in configure.in This fixes the regression
724 kes This patch fixes bug #1012 where the job is canceled because
725 of Max Run Time exceeded when the job has not yet started.
727 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
728 one 'part' to write. Instead of each part being stored on disk,
729 written to DVD, then deleted from disk, all parts are written to disk,
730 and only the last is written and deleted from disk.
731 kes This patch fixes the status command to include the formating string for
732 JS_AttrInsterting. It fixes bug #1021.
733 kes This patch should fix the Mac OS X build problem on the latest
734 Darwin, where sys/types.h was not included correctly (apparently
735 due to a change in the Mac headers). The solution was to explicitly
736 ensure that it is defined for the ./configure.
737 This patch also has a rebuild of configure that includes the Debian
738 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
739 kes This patch should ensure that queued messages to the console are
740 displayed as soon as possible. It should fix bug 1007, but has been
741 reported not to work.
743 kes This patch fixes the infinite loop when trying to increase the
744 maximum number of volumes in a Pool during the add command.
745 This patch fixes bug #1008.
747 Release Version 2.2.6
749 db Remove extra data on estimate command in joblist for bat.
751 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
752 really change anything, but is the beginning of doing it *right*.
753 To do it completely right the LastWritten date must be passed to
754 the SD, but it is not yet done.
755 kes Minor tweaks to some bat restore SQL.
756 kes This patch fixes bug #1003 where putting the message output from
757 a Verify job into the catalog results in a recursive loop. The problem
758 seems to show up only with postgresql (to be verified).
759 kes Correct %x to %p in postgresql debug statement.
761 kes Fix bug #942 where lots of emails where generated when the heartbeat
762 interval was low and Bacula wanted a different tape from the one in
765 ebl Add new SD despooling attributes and Dir inserting attributes
766 job status codes in the catalog (Status table).
768 ebl Use qmake-qt4 instead of qmake when available (debian system).
770 kes Add a security warning to src/cats/make_catalog_backup.in indicating
771 that passing the password via the command line (arg 3) is insecure.
772 This responds to bug #990 (it doesn't fix it).
774 kes Set default debug_level to zero. This corrects bugs #991 and #993.
775 kes Fix a crash in bat when it cannot connect to the Director for example
776 if the Director is not running.
777 kes Remove redundant INDEX (JobId) from File table in the trunk.
779 kes Make explicit exception to GPL in LICENSE to permit linking
780 the Win32 FD with Microsoft VSS code.
781 kes Apply the Solaris package patch from
782 Masopust, Christian <christian.masopust@siemens.com>
783 kes Apply the patch to optionally add a timestamp in the debug output
784 submitted by Mariusz Czulada <manieq@wp.eu>.
786 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
787 backend (sql_strerror). Fixes bug #989
789 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
790 It applied with no problems.
791 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
793 kes Redirect stderror to stdin on mt status command in mtx-changer.in
794 since the status is returned on stderr on Solaris.
795 kes Activate Close button on tray-monitor window. This fixes
797 kes Check for NULL item in parse_conf.c before calling it. In the
798 case of Device, there is no item and this caused a seg fault when
799 Device appears in the conf file.
800 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
801 avoids pulling in config.h multiple times in some new code.
803 kes Fix spurious warning message printed when creating a volume with
804 a LabelFormat. This fixes bug #976.
806 Release Version 2.2.5
808 kes Add JobId in place of Job name in all the Jmsg() output.
809 kes Correct the APP_DESC for the Win32 storage service (remove an e).
811 kes Make maxvol-test and new more strict maxvol2-test work.
812 kes Print JobId in all Jmsg() job output.
814 kes Add new SD despooling attributes and Dir inserting attributes
815 job status codes. This fixes bug 961.
816 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
818 kes Fix doc issue. This fixes bug #963.
819 kes Fix listing performance problems in bat. Pointed out by
821 kes Remove old debug code.
822 kes Fix bat code that tests for Win32. This should fix bug #968
823 kes Query 5 list wrong Vol after migration. This fixes bug #960
825 ebl Fix #969 where user can't change Replace option in restore menu.
827 kes Save jcr in thread specific data (tsd) for each thread.
828 kes Make Dmsg() print JobId as -%u.
829 kes Make Jmsg, Emsg, and others automatically pickup the jobid
830 for the thread if it exists.
831 kes Remove old reservation debug jid code.
832 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
833 ebl Add an option that permit to specify spool size in job
834 definition. (Applying patches/testing/spoolsize_per_job.patch).
835 You must upgrade SD and DIR at the same time.
836 dvl Add new configuration item --archivedir
837 dvl Adjust regression tests to use tmp not /tmp. This will allow
838 multiple concurrent runs of the regression tests.
840 kes Fix race condition that drops final block written to volume.
841 This happens in rare cases with multiple simultaneous jobs
842 when the Volume fills. This fixes bug #964. May be related
843 to bug #935 and possibly #903.
844 kes Eliminate more strerror() and replace with bstrerror().
845 kes Remove BSD getopt and replace with unrestricted IBM version.
846 kes Fix Win32 build for changed calling sequences.
847 kes More tweaks to the mount volume routines to get everything
848 right. Changed variable name from find to have_vol, which is
849 much easier to understand.
850 kes Enhance btimer debug code.
852 kes Fix FD->SD authorization failure, which was due to spurious
853 wakeups from a pthread_cond_timedwait(). Simply check the
854 predicate before continuing. This fixes bug #953.
855 kes Add const char where needed (more to do). Remove temp debug code.
857 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
858 kes Don't overwrite error message in check_tables_version.
860 kes Unlock batch insert tables with same calls used elsewhere.
861 kes Allow starting 59 jobs a second.
862 kes Make SD session key more random.
863 kes Add retry for SQLite opening db if it fails. Probably helps
865 kes Suppress extra error messages during batch insert failure.
867 kes Add jcr to timer packets so if killed message can be sent to job.
868 kes Add JobId to all Dmsg() output.
869 kes Put some FD auth code on dbglvl rather than fixed.
870 kes Return insert attributes error message in db msg buffer to avoid
871 false error messages. Helps fix bug #966.
872 kes Separate batch init error messages. Probably helps fix bug #966.
873 kes Make SD code that contructs attribute insert check string lengths
875 kes If Dir gets an error during inserting attributes, cancel SD.
876 This reduces unnecessary error messages.
878 kes Correct search boolean for getting Volume info
879 ebl Cleanup batch insert code. Probably fixes bug #965.
880 kes Back out one small change to the reservation system (reserving a volume).
881 kes Rework how a Volume is mounted. It is now much more intelligent and
882 will always attempt to use any mounted volume if possible and reduces
883 calls to the Director asking about volumes.
885 kes Turn off some code when batch insert not enabled.
886 kes Edit FD name in connect error messages.
887 kes Rework the reservation system to take into account that the Director
888 might give us a Volume that is different from the current one being
889 used, and to ensure that we don't exceed Maximum Volume Jobs.
890 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
891 fatal error with multiple jobs running'
892 kes Add more debug code in reservation system.
893 kes Implement maxvol-test to check bug #947.
895 kes Add code to handle tray monitor separated from Win32 FD.
896 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
898 kes Add missed return in fixing verify bug -- trunk only.
899 ebl Fix a command parser issue causing a director segfault.
900 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
902 kes Increase the max block size to 4MB fixes bug #957.
903 kes ERABT if user sets min block size > max block size. Fixes bug #956.
904 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
905 is not properly mounted (recognized) during a poll.
906 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
907 Job that has differences reports Verify OK.
908 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
910 ebl Add an option to operate on all pools with update vol parameters.
911 This complete the project 20. Patch from Nigel Stepp.
912 ebl Add history support to bconsole when using readline.
913 Using Ctrl-D to exit doesn't update .bconsole_history
914 kes Modify new volume algorithm to use max MediaId for generating next
915 volume number rather than the count of Volumes. This should essentially
916 eliminate the failure rate if some volumes were deleted. Bug #921.
917 kes Begin implemention of Optimize Job Scheduling.
918 kes Implement restore callback that Dirk and I agreed on for bat
919 restore. This fixes bug #928. Restore of backup of zero files fails.
920 kes Fix SQL Catalog logging which broke with new db_escape_string
923 Release Version 2.2.4
925 kes Fix bacula_cats.def for new db_escape_string().
926 kes Increase size of name string when FD making connection to SD.
927 May fix bug #953. FD->SD connection failure.
929 kes Add code to help Dan debug 2drive-incremental-2disk test.
930 kes Add code to try to fix bug #908.
931 kes Add waits to multiple exit detection code to try to force pid
932 file to always be deleted.
933 kes Restore good dev.tar.gz to rescue set appropriate binary property.
935 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
936 trying to switch drives by checking for blocking before unblocking.
938 kes Cancel storage daemon in all cases where FD reports error. This
939 should fix virtually all cases of bug #920.
940 kes Fix db_escape_string() for MySQL which did not compile.
942 kes Fix error message that was clobbered when Dir tells SD it does not
943 have write permission on Volume. This should fix a minor point
944 in bug #942, but not the main problem.
945 kes Add code to cancel job in SD if FD connection fails. This should
947 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
948 dvl Pass jcr and db into db_escape_string() to enable better escaping
950 kes Fix migration code to get correct Volume name with multiple volumes
951 by skipping |. Fixes bug #936.
952 kes Implement patch supplied by Landon to fix bug #944 where using
953 TLS with bconsole uses 99+% of the CPU.
954 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
956 kes Move patches into patches directory.
958 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
961 ebl Using 'm' in bconsole will show messages like before,
962 and not memory usage.
963 kes Fix bug #935, and probably also bug #903 where files were not
964 restored. MediaId was not properly set in JobMedia record after
967 kes Suppress chown and chmod error messages if the FD is not running
970 kes Apply Martin Simmons' patch that should turn off the new API usage
971 when batch insert is turned off allowing building on older
973 kes Add ./configure search in qwt-qt4 for qwt package
975 kes Bacula is now free of 3rd party GPL copyrighted code!
977 kes Add guid_to_name.c/h which replace idcache.
978 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
980 ebl Detect if new PosgreSQL batch insert API is present.
981 kes Correct incorrect mempool call causing Director crash. Occurs on
982 systems without va_copy().
983 sb Update spec files for 2.2.1 release
985 kes Fix memory pool call in ua_output.c. bug #934.
986 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
987 Add test program to fnmatch.c
989 kes Integrate patch to README.vc8 from
990 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
991 edit it to get it into Unix patch format.
992 kes Implement mkpath.c to replace old FSF makepath.c
994 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
996 Release Version 2.2.1
998 kes Update POTFILES.in
999 kes Cleanup a few underquoted AC_DEFUNs in configure
1000 kes Apply patch from Martin Simmons that adds a test for va_copy to
1003 kes Fix bug #921 by increasing the number of tries to create a new volume
1005 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1006 can be called multiple times. Implement a version for machines
1007 without va_copy() that gets a big buffer.
1009 kes Integrate more portable zone offset code into bsmtp.c
1010 Submitted by Attila Fülöp.
1012 kes Fix bad SD->FD return status reported by
1013 (James Harper) <james.harper@bendigoit.com.au>
1014 ebl Fix a bug in read_close_session which return random status
1015 thanks to James Harper
1017 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1018 and directory names during restore of single file/directories.
1019 kes Add sanity checks to .sql command when string is empty. Hopefully
1020 that will resolve Dirks Director crash.
1022 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1023 in the bsmtp chat subroutine when debug is >= 10.
1025 kes Fix Director crash when running bat SQL queries.
1026 kes Add David's notes on Item 8: Copy pools.
1028 kes Rework projects file to be current and ready for a vote.
1029 kes Enhance lex scanner error message.
1031 kes Tweak LICENSE file to mention BSD code.
1032 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1033 if specified on the ./configure.
1034 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1035 This class is intended to allow us to open a second bsock to the
1036 Director while in the restore subdialog.
1038 kes Fix configure to create bat Makefile before creating dependencies.
1039 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1040 kes Add a tooltip to the tray monitor.
1041 dvl Set the Director's PID file before dropping privs. This fixes
1044 kes Update AUTHORs file
1045 kes Increase the default max concurrent jobs to 20 in FD and SD to
1046 correspond with the default .conf files.
1047 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1048 some different, of the same file created by RN when porting the
1050 kes Rearrange some of the Win32 directories and the placement of the files
1052 kes Set DEVELOPER flag in version.h
1054 ========================================================================
1055 Release Version 2.2.0
1057 kes Apply a second doc patch from Marc.
1058 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1059 improves the tips section that discusses how to setup multiple
1062 kes Update bat README file.
1063 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1064 corrects a typo in the Recycle status check in db_find_next_volume().
1065 This will probably fix a number of annoying problems with multiple
1067 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1068 bnet calls -- no functionality change.
1070 kes Modify the Verify output to specify if files are missing on
1071 the Volume(s) or disk. Fixes confusion in bug #916.
1072 kes When more than one Volume is read in a migration job, the last
1073 Volume bytes reported are from the last read volume rather than
1074 the last written volume. Fixed. This fixes bug #910.
1075 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1076 It previously printed New Recyle flag is: no. This fixes bug
1079 kes Correct seg fault when switching tape drives during restore.
1080 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1081 be used until after 2.2.0 release.
1083 kes Remove fnmatch() in SD that permitted wild card specifications.
1084 This fixes bug #914.
1086 kes Fix %g in filename returned by SQL for browse tree reported by
1088 kes Fix configure so that it puts config.out in the cwd rather than
1090 kes Attempt to fix the locking problem reported by Eric in bug #906.
1091 kes Make berrno class to leave errno unchanged after constructor call.
1092 kes Make bnet_server use the heap rather than the stack to allocate
1093 its socket fd pointers to avoid a crash at termination. Problem
1094 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1096 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1097 and putting it in depkgs-qt along with Qt4.3.
1099 kes Rework code in acquire.c that switches drives for reading when
1100 the Media Type does not match. This should fix bug #906
1102 ebl Fix a director segfault during job setup #907
1103 kes Correct seg fault in postgresql when first operation returns no
1104 rows. Fixes Dirks File browser problem seg fault with bat.
1106 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1107 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1110 kes Implement PopUp YES/NO dialog for bat.
1112 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1114 kes Correct RunScript to terminate job in FD on failure.
1115 kes Change abort_on_error and AbortJobOnError to fail_on_error
1116 and FailJobOnError in RunScripts.
1117 kes Minor tweaks of code formating in RunScripts, principally to
1118 avoid depassing 80 columns.
1120 kes Eliminate one #ifdef Win32 in bsmtp
1121 kes Implement grow tool to grow a file for testing very large databases.
1122 kes Add big-vol-test to test Bacula seeking with > 5GB.
1125 kes Modify find_next_volume() to return all values in Media record.
1126 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1130 kes Update Release notes
1132 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1133 Warning, in previous beta version, all media get from scratch keep their
1136 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1137 This should fix bug #842. Made a note to look at removing the temp
1138 files at the end of the install.
1139 kes Add ability to mount and unmount a file device providing it is
1140 marked as being removable and has the appropriate mount and unmount
1141 commands defined in the Device resource. This fixes bug #830.
1142 kes When applying a storage override, release all previous storage
1143 definitions rather than just prepending the new storage.
1144 This should prevent a good deal of confusion.
1146 kes Implement ./configure search for qwt libraries.
1148 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1149 Win32 FD. This should fix bug #893.
1150 kes Remove an unnecessary beep in Win32 init code.
1151 kes Update copyright dates in Win32 executable about boxes.
1152 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1153 code with a BSD getopt.c and getopt.h.
1154 kes Remove sched.h from the Win32 compat directory -- not used.
1155 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1156 need to shut it down, do it through the services panel or the command
1158 kes Remove some inappropriate Bacula FSFE copyrights.
1159 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1160 kes Fix regress config non-portable test as pointed out by
1161 Florian Heigl <florian.heigl@gmail.com>
1162 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1163 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1165 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1166 Reported by Frank Sweetser.
1170 kes Fix client-only build.
1171 kes Integrate client-only fixes for bsys (initgroups) and conio from
1172 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1173 kes Make arguments to get_scratch_volume() in same order as other
1175 kes Rework the prune_volumes() subroutine so that after purging and
1176 no volume found in desired pool, it will check for a scratch
1177 volume. This prevents recycling the whole scratch pool.
1178 kes Add code to status storage to print boffset_t (largefile support).
1180 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1181 kes You now need a --with-qwt=<dir> to be able to build bat.
1182 kes Update src/win32/cats/bacula_cats.def to include the new
1183 db_get_query_dbids() call on Win32.
1185 kes Correct a problem when selecting a scratch volume and moving
1186 it to another pool that lost some columns.
1187 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1188 kes Enhance Autochanger error messages to include Volume and device name.
1189 kes Rework prune_volumes() code to take account of InChanger flag,
1190 and to handle recycling volumes going to the Scratch pool and
1191 current pool because the RecyclePool directive.
1192 kes Implement a better and more efficient db_get_query_dbids() to
1193 handle creating and passing back a list of DBIds.
1197 kes Start work on new more efficient DBId subroutine. First use
1198 will be for recycling volume to Scratch inchanger.
1199 kes Increase number of JobIds in pruning from 1000 to 10000.
1200 This to be replaced by above routine.
1201 kes Begin implementation of building Qt4 on Win32.
1202 kes Correct typo in fix I added for bad TLS shutdown.
1203 kes Pull 2.0.3 patches into patches directory.
1204 kes Update Release notes. Include qt-console in line count.
1205 kes Update Projects file.
1207 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1208 bug in migration code where a job that spanned two volumes
1211 kes Implement new BST_DESPOOLING blocked state. Change from locking
1212 during despooling in SD to blocking. This means that other threads
1213 can work with the device structure, in particular the reservations
1214 system while despooling.
1216 kes Fix return in reservation message queue that missed clearing
1217 the jcr lock (implemented 26Jun07 below).
1218 kes Rename a number of dev methods to make locking function names
1220 kes Document locking in lock.c. Move lock structures to new file
1223 kes Move reservations message lock to lock jcr only this
1225 kes Move main SD locking code into lock.c (new file).
1226 kes Update Win32 build to include lock.c
1230 kes Dirk committed the qwt library code for drawing graphs in bat.
1231 kes Tweak install of qwt so that it is integrated with ./configure.
1233 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1234 out by Eric (my typo).
1235 ebl Fix configure.in to get batch mode enable
1236 kes Return correct string from authenticate.cpp in bat when connecting
1238 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1239 spurious line drops when using TLS.
1240 kes Do not file reparse points when restoring a file that already
1243 kes Implement Windows reparse points -- similar to directories, but
1244 we do not descend into it. This is a first cut. They seem to
1245 be backed up, but restore is not yet tested.
1246 kes Remove restore_blocking in tls code when shutting a socket to leave
1247 it in blocking mode. Hopefully this will fix the encryption bug
1248 reported by Frank Sweetser.
1249 kes When opening a file for backup, tell the OS that we are going to
1250 read it sequentially -- optimization.
1251 kes Change variable names in authenticate_director() to not conflict
1252 with member names in bat. Caused great confusion with compiler,
1255 kes Queue openssl error messages in case of comm problem.
1256 kes Do shutdown() call if socket terminated.
1257 kes Remove some duplicated code in tls.c
1258 kes Move more of the bsock member variables into private and access
1260 kes Add Frank Sweetser's tls-test to the regression suite.
1262 kes Add Swedish sv.po file
1264 kes Don't print clock skew message in FD if less than 3 seconds diff.
1265 kes Add a bit of VSS info to status client.
1266 kes Implement a first cut of Vista VSS, using Win2003 code.
1268 Release: 2.1.20 beta
1270 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1271 loaded tape but uses first drive).
1272 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1273 This was indeed a Win32 issue.
1275 kes Simplify search of autochanger for in-use Volume.
1276 kes Fix exit condition of check for in-use volume. kes Remove
1277 inappropriate my_postgresql_free_result() in db_close()
1279 kes Fix bad return in FD when encryption signature not found.
1280 Probably caused a crash.
1281 kes Inhibit missing encryption signature error messages for
1282 file types where no signature computed.
1283 kes Correct inverted check on autochanger in reservation system.
1284 kes Tweak debug code in autochanger reservation.
1286 kes Add some additional locking in the cats directory in subroutines
1287 that modify packet variables called from batch insert.
1288 kes Rework how dcrs are allocated. new_dcr() can now be called
1289 with an existing pointer, and it will simply clean it up.
1290 This allows the reservation system to test various different
1291 devices, and will permit easy device changes.
1292 kes A bunch of changes all over to handle new new_dcr() calling
1294 kes Work more on the Volume management in the SD. Remember Volumes
1295 for tape drives and for autochangers (even virtual disk changers).
1296 kes When looking at the Volume list to reserve a drive, handle
1297 autochanger names correctly by interating through the changer
1298 devices. Also call the Director to see if a Volume is suitable
1299 for the current job.
1300 kes Fix some bugs in bscan. Make sure all media records are written.
1301 Make sure that valid JobMedia records are written for disk files.
1302 Previously they were completely wrong.
1303 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1304 that the URLs don't change and so that the developers will all
1305 work off the same copy. Rebuild from scrach.
1306 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1308 Release: 2.1.18 beta
1310 kes Fix seg fault in FD from incorrect digest size.
1311 kes Fix argument to non-OpenSSL crypto.c subroutine.
1313 Release: 2.1.16 beta
1315 kes Remove a few malloc()s from the encryption code.
1316 kes Use the class calls to bsock in filed/backup.c and restore.c in
1317 place of the old bnet_xxx code.
1318 kes Implement code that does an on the fly calculation of the
1319 signing digest during restore of encrypted files. It makes
1320 a best guess at the algorithm, and if it is not correct, will
1321 then revert to the old code which reads the file after it is
1323 kes Implement at least one missing crypto stream in stream_to_ascii()
1324 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1325 #877 where a reload with bad syntax causes Dir to exit.
1327 Cut: 2.1.14 beta (not released)
1329 kes Do not free a volume on a tape drive until another volume is
1330 mounted and read, or the autochanger unloads the volume.
1331 This should help the SD re-use volumes that are already mounted,
1332 and should fix bug #886.
1333 kes Apply patch from user brettedgar that allows gnome2-console include
1334 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1335 kes Apply patch from Lucien Weller that fixes day of week calculation
1336 because of DST flag problem. Fixes bug #887.
1338 kes Move find_next_appendable_volume() to after acquiring a valid device
1339 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1341 kes Unable to reproduce bug 872. However added additional testing for
1343 kes Bug #874 resolved by documenting SQLite limitations.
1344 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1345 kes Bug #881 resolved by removing typo in mtx-changer script.
1346 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1347 approval. Added a link to the wiki on the web page, and implemented
1348 a backup from http://paramount.ind.wpi.edu
1350 kes Fix update allfrompool to pass pool name.
1352 kes Convert to pure GPL v2 license.
1353 kes Fix sscanf problems reported by Peter Buschman that caused
1354 a bus error on Solaris.
1355 kes Rework (simplify) the select prompt in bat.
1356 kes Move get_jobid_from_tid() into lib and create a
1358 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1359 should definitely fix the problem of lost error messages in the
1361 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1362 kes Eliminate tcpd.h from the project. Enclose the #include from the
1363 library with extern C ...
1364 kes Add print of signal name when a signal is trapped.
1366 Release: 2.1.12 beta
1368 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1370 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1371 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1372 makes SQLit3 run 30 times faster, though a bit less safe.
1373 kes Implement --with-batch-insert in configure and detection of thread
1374 safe libraries. It is on by default, but turned off if no thread
1375 safe library (e.g. SQLite 2) is available.
1377 kes Fix Bacula PostgreSQL buffer overruns.
1378 kes Do better checking for NULL results returned from PostgreSQL;
1379 implement retry for failed queries; clear results buffer after
1380 failed query. Hopefully this will correct the PostgreSQL failures.
1382 kes Implement algorithm to handle only one appendable volume with
1383 Prefer Mounted Volumes = no.
1384 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1385 returned from a query.
1386 kes Make volume lock recursive.
1387 kes Implement an additional volume reservation algorithm that
1388 starts by considering all reserved volumes then uses the
1389 old brute force algorithm of searching the resources to
1390 find a suitable device.
1391 kes Add new reservations debug code and refine the old code.
1392 kes Update the win32/dll/bacula.defs file.
1394 kes Tweak reservations algorithm to permit a few more cases, i.e.
1395 volume reserved, but on different drive, ...
1396 kes Enhance SD status to include Pool and Media Type for drive in a
1397 more readable format (a bit longer).
1398 kes Fix PostgreSQL double free.
1400 kes Minor refactoring of restore decryption code.
1401 kes Add code to smartall.c to detect double free of a buffer.
1403 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1404 so that bsmtp will create a correct email address (mailbox only).
1405 kes Modify 'memory' command so that the buffers are listed as 'In use'
1406 to avoid confusion with Orphaned buffers.
1407 kes I reworked the OpenSSL include/lib flags to be handled in
1408 the standard Bacula way, which should fix bug #863 concerning
1409 non-standard OpenSSL libraries.
1411 kes Implement Help Browser window for bat.
1412 kes Fix reload bug that reset StorageId to zero.
1414 kes Fix TLS #ifdefing when TLS turned off.
1415 kes Ensure that when labelling a tape with Slot=0 that InChanger
1417 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1419 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1420 add DISTINCT (required by PostgreSQL).
1421 kes Implement BSOCK authenticate_director() method. Eventually will
1422 authenicate all daemons.
1423 kes Move several more functions into the BSOCK class.
1425 kes Add code to tell the OS that we no longer need a cached
1426 file that we were reading. In findlib/bfile.c. Also,
1427 only cache files that we are reading. Thanks to
1428 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1429 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1430 kes Implement script to automatically generate cats and dll .def
1431 files for Win32 dll.
1432 kes Update README.mingw32 to include new .def file generation.
1433 kes Correct typo in UTF-8 error message as reported by:
1434 jhernandez <julianhernandez@gmail.com>
1435 kes Add additional sm_check() code on debug level 1.
1436 kes Set default debug level to 1.
1437 kes Trap SIGABRT in attempt to get traceback.
1439 kes Reduce bat connect timeout from 30 to 15 seconds.
1440 kes More restructuring and implementing BSOCK class in place of
1442 kes Remove a few unnecessary malloc() tests in crypto code.
1443 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1444 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1445 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1447 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1449 kes Fix Verify InitCatalog. The attributes were not pointing to the
1450 correct saved location.
1451 kes Implement message callback so that GUI is sure to get all
1452 daemon messages. Currently displayed in a dialog in bat.
1453 kes Ignore SIGUSR2 (Bacula timer) in bat.
1454 kes Apply regress patch from bug #859 to allow regress to work
1455 with Solaris compiler.
1457 kes Begin adding TLS support to bat.
1458 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1459 clean up lex.c and make it more readable.
1461 kes Move more bnet functions into the BSOCK class.
1462 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1463 kes Complete change of berrno strerror() method to bstrerror()
1465 Release: 2.1.10 beta
1467 kes Cleanup incorrect email addresses in bsmtp.
1468 kes Make bat display initial messages rather than discard them.
1470 kes First cut of adding .mod to the run command.
1471 kes Implement auto display of messages in bat.
1472 kes Enhanced preferences to allow all Bacula output to be
1475 kes Try to make bsmtp date routines more generic.
1476 kes Fixed bug #856 autochanger documentation.
1477 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1478 kes Add new cats entry point so Win32 builds.
1480 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1482 kes Do better checking for the MySQL 64 bit libraries looking for both
1483 .a and .so libraries.
1484 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1485 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1486 kes Require the thread safe version of MySQL during configure. Thanks
1487 to Andre Noll for pointing this out.
1488 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1489 continuing in migration code.
1490 kes Apply implementation of tray-monitor font derived from gnome-console
1491 submitted by Andreas Piesk <a.piesk@gmx.net>
1493 kes Eliminate important memory loss in SQLite
1494 kes Fixed the batch insert MySQL thread specific data that was not
1495 being freed. See cats/mysql.c:db_thread_cleanup().
1496 kes Fix restore before command.
1497 kes Convert old hdr.name to name() in a few places.
1498 kes Implement update jobid command.
1499 kes Return all time_t dates in db_get_job_record()
1500 kes Stop watchdog in SD earlier.
1501 kes Put Pool just after Storage in please mount message.
1502 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1505 kes Update the po files.
1506 kes Fix Verify InitCatalog by making it cache attributes.
1508 kes Change name bacula-bat to bat for man 1 page to correspond to
1510 kes Check for client and store NULL pointers in status command. This
1512 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1513 kes Fix sign extended editing of %p.
1514 kes Clean out a little old #ifdefing in cats/mysql.c
1516 kes If time diff between DIR and FD is more than 600 seconds convert
1517 INFO message to WARNING.
1518 kes Implement heap size display in status for all daemons.
1519 kes Attempt to fix MySQL db open memory loss (not successfull).
1520 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1521 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1522 Query. This looks like a MySQL but but by doing extra releases,
1523 the memory goes away. This should fix bug #847.
1525 kes When backup fails, cancel SD before waiting for sd termination.
1526 kes If SD is waiting for FD to connect during cancel, wake up the
1528 kes Fix fsf code so that errno is correctly reported.
1529 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1531 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1532 so that Bacula doesn't later stumble into a seg fault.
1533 kes Use the term Restore Client in the restore Job report.
1534 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1535 the original job's FileSetId.
1536 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1537 spooling in migration jobs. Not yet tested.
1538 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1539 reading conf file from a pipe. However, do it with open_bpipe()
1540 rather than popen. Not yet tested.
1542 kes Fix an ugly bug where the VolCatBytes were getting updated
1544 kes Implement bconsole memory command that prints current memory
1545 usage, plus smartalloc dump.
1546 kes Clarify some error messages in backup, admin, and migrate.
1547 kes Shrink label dialog to smaller size.
1548 kes Invert Cancel OK buttons on restore to be OK Cancel.
1549 kes More strerror() to bstrerror() conversions.
1551 kes Start implementing bstrerror() in place of strerror().
1552 kes Stripping path -- seems to work.
1554 kes Prevent door and port files from being restored (mostly
1556 kes Free an unreleased buffer in compat code.
1557 kes Change console Job name from *Console* to -Console- to eliminate
1558 Win32 filename problems. Put Win32 path separator when creating
1559 Console file. This fixes bug #846.
1560 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1562 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1564 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1565 to force Win32 error message.
1567 kes First cut strip path. The data should be passed to the FD,
1568 but nothing is done with it yet.
1569 kes Enhance the digest and signature routines in the crypto
1570 library to accept a JCR and to use it to print error messages
1571 so that they will go in the Job report rather than the daemon's
1573 kes Simplify some of the verify signature code.
1574 kes Simplify a few of the alternative returns in the signature
1577 ebl Use only POSIX regex instead of GNU regex in breg.c for
1578 File relocation. It fix broken freebsd compilation.
1579 kes Convert all other Dir files to use new ua class message
1581 kes Tentative fix for missing digest signature in bug 807.
1582 kes Correct handle problem in new win32_ftruncate routine.
1583 kes Convert ua_purge.c and ua_update.c to use new ua class
1584 message routines for bat.
1586 kes Correct incorrect installation of LICENSE in Win32 installer.
1587 kes Display LICENSE at the beginning of the Win32 install.
1588 kes Attempt to correct the need for the png files to be installed
1590 kes Reapply my bat.conf install script in qt-console. I think I
1591 editted bat.pro instead of bat.pro.in and it was lost.
1592 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1593 the /var/lock/subsys for subsysdir. Also corrects typos in the
1596 kes First cut update job.
1597 kes Correct configure to include qmake of src/qt-console directory.
1599 kes Make restore job yes/mod/no print in one command so GUI works.
1600 kes First cut implementing backup and restore client.
1601 kes Correct editing in Verify output that caused a seg fault.
1603 kes Insure that bat.conf is not overwritten during installation.
1604 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1605 while I was implementing migration in March 2006 !
1607 ebl Cleanup file relocation, using char *RegexWhere instead of
1608 char *where + bool where_use_regexp
1609 kes Update some manpages and add bat manpage.
1610 kes Make a first cut at converting bacula.spec.in for bwx-console
1612 kes Apply patch from John Goerzen to add hostname as fourth argument
1613 to make_catalog_backup script.
1614 kes Fix typos I introduced into bsmtp.c
1615 kes Make pm_strxxx() routines handle input of NULL pointer. This
1616 is to protect from NULL pointers returned from SQL databases.
1617 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1618 kes Add more debug to FIFO code -- fix fifo regression test.
1620 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1621 kes Add thread timer to bnet_connect() to break from OS if wait time
1624 kes Update Win32 build to include new files, new symbols, and
1626 kes Implement socket level heartbeat (tcp_keepidle)
1627 ebl Commit File relocation patch
1628 kes Make bat have 'make install' target.
1629 kes Warn during install if old gnome-console binary found.
1630 kes Warn during install if old wx-console binary found.
1631 kes Add -8 option to bsmtp command line to add content type utf-8.
1632 Fixes bug #809. (Character coding problem in bsmtp).
1633 kes If < is found in target (from, to, cc) then do not enclose the
1634 target in < > in bsmtp. Fixes bug #772 (malformed address).
1635 kes When printing certain items in dbcheck, stop after 300000.
1636 Fixes bug #822. (dbcheck loops).
1637 kes Incorrect status in Dir after waiting for mount with poll set.
1640 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1642 kes Print waiting to reserve a device every 5 mins.
1644 kes Don't call close_part in label.c if tape and relabel.
1645 kes Don't free volume if busy in close() -- should help with
1647 ebl Fix #824 RunScript bug (After script could be execute twice)
1648 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1649 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1650 Add a regression script to test RunScript
1652 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1655 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1656 deprecated. No additional bugs will be fixed, and they will be dropped
1657 in a future release (probably 2.4.0).
1658 kes Change name of wx-console to bwx-console to make it more Bacula
1660 kes Change the name of gnome-console to bgnome-console to make it
1663 kes Some time in March, a Feature Request with patch from Jorj Bauer
1664 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1666 The ability for the director to validate a Client (FD) CN against
1667 an arbitrary set of patterns rather than the hostname, with
1668 A new 'TLS Allowed CN' set of directives which are implemented
1669 in the Client resource. Then pattern matching is used in place
1670 of hostname matching against the Certificate's CN. As an example, we
1671 have certificates which (a) use a local CA, and (b) have a CN of the
1673 kes Add new/changed entry points to Win32 build
1674 kes Create unaccepted-projects for projects that are not accepted.
1675 kes Simplify locking in the reservations system.
1676 kes Add more debug code in reservations.
1677 kes Make sure error condition on reserving a volume is handled correctly.
1678 kes Correct handling of volume_in_use.
1679 kes Correct handling of initializing a device.
1680 kes Move handling of broadcasting releasing a device into release_device().
1681 kes Correct attaching dcr to dev so that it is only done if device
1682 is properly initiated.
1684 kes Locking debug level tweaks in SD.
1685 kes Tweak new Volume code.
1687 kes Add exec external-command [wait-seconds] to bconsole. This
1688 executes the external-command. Note! normally external-command
1689 should be enclosed in double quotes.
1690 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1691 it should normally be off in a production system.
1693 kes Implement die command for SD so that we can force it to dump.
1694 kes Implement SD lock debug code.
1695 kes Implement new algorithm for keeping Volume list in SD. It
1696 is now owned by the device.
1698 kes Implement new code for freeing in use volumes that should
1699 resolve if not all, some of the problems of multiple drive
1700 tape conflicts described in bug 801.
1702 kes Fix gui/bacula-web/images files in svn.
1703 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1705 ebl Fix a bug in batch mode (in string escape)
1706 kes Correct migration prune SQL typo that crept in in a
1707 recent 2.1.x change.
1709 kes Move bnet_despool() into class in bsock.c
1710 kes Modify job report to include director name and Build OS.
1711 kes Move drop root privilege and check_catalog() before fork.
1712 kes Add update database scripts (version 9 to 10) to updatedb directory.
1714 ebl Check size and age of each file after its backup to see if
1715 it has changed during backup, if 'checkfilechanges' is set.
1716 The FD will do an extra check (stat(2)) after
1717 each file backup. mtime, ctime and size are compared with
1718 'before backup' information. If time or size mismatch, an
1719 error message will be generated. You must upgrade FD to use it.
1721 kes Make database name and user configurable
1722 --with-db-name=xxx --with-db-user=xxx
1723 kes Add back database type to message.c for debugging.
1725 kes Implement dir_sql() which issues an SQL query.
1726 kes Modify bat medialist to use dir_sql() and do some minor C++
1727 formatting as well as eliminating a number of pointers, simplifing
1730 kes Fix some of the mtx-changer grep commands for tape label readers.
1731 kes Convert a number of bsendmsg into the appropriate send/warning/error
1732 message class calls.
1733 kes Suppress the using database message in the .sql command.
1734 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1736 kes Add context menu for floating a window.
1737 kes Some minor cleanup and name changes in qt-console
1738 kes Add doing mt setblk 0 in Win32 mtx-changer.
1739 kes Apply Martin's bug fix to move definition of ENODATA for
1741 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1742 sqlite2 and sqlite3.
1744 kes More pruning cleanup.
1745 kes Turn on wait_for_drive by default in mtx-changer.
1746 kes Turn on Batch insert code by default as it now passes regression.
1747 kes Add ./configure --enable-bat to enable building of Bat.
1748 No install yet though.
1750 kes Implement a new .sql command for bat.
1751 kes Implement code to turn off pruning in obtaining the next volume.
1752 Pruning is turned off for the status dir command, but turned on
1753 for SD requests and for the list nextvolume command.
1755 kes Correct Qmsg() that was not updated correctly when committing a
1756 previous change (probably the recent TLS patch).
1758 kes Write new subroutine is_volume_purged() that explicitly checks
1759 if the Volume is purged, and if so marks it as such. This should
1760 resolve problems reported about needing to mount twice to recycle
1762 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1763 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1764 amount of duplicated code.
1765 kes Do volume pruning only for the Media Type desired (reduces pruning time
1766 if multiple Media Types are in the same pool).
1767 kes Implement more detailed info in the Job report for the Bacula version
1769 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1771 ebl Add bbatch tool to bench database and insert mode.
1772 Fix sql quote stuff in batch mode
1773 Fix sql stuff for mysql
1775 kes Correct problems with am/pm scheduling. Fixes bug #808.
1776 kes Implement new prunning code that prunes up to 1000 jobs at
1777 the same time. The same technique can be applied to a number
1778 of other prune/purge subroutines.
1779 kes Add an insanity check when starting a new tape job to ensure
1780 that the tape position has not been changed. If so fail the
1782 kes Fix Win32 build for dlls to add the folllowing:
1783 src/lib/bsock.c -- new file with new entry points
1784 src/lib/dlist.c -- new entry points
1785 src/cats/sql_create.c -- new entry point
1786 src/cats/sql_cmds.c -- new DATA item exported
1788 ebl batch mode cleanup bscan-test is ok now.
1789 kes Implement SD code to check length of disk volume before appending.
1791 kes Correct return status on db_batch... routines.
1792 kes Add call to db_write_batch_file_records() to migration code.
1793 ebl Fix AfterJob timing
1794 kes Move the checking of the database in initializion of the Director
1795 to after we drop privileges. This avoids the need for both root
1796 and bacula access to the DB.
1797 kes Correct a misplaced variable definition in src/filed/backup.c
1798 kes Correct how the new batch insert db_create_attributes_record()
1799 uses the arguments. Caused a seg fault in bscan.
1800 kes Implement lock() and unlock() methods in DEVICE class.
1801 Implement block() and set_block(xx) methods in DEVICE class.
1802 kes Modify bnet_connect() so that it uses time() to check for the
1803 wait time expiring (on some OSes, some system calls may not
1804 return immediately).
1805 kes Modify Verify to obtain the previous JobId when it is actually
1806 running rather than at schedule time (as it was in 1.38.x).
1807 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1809 kes When checking pid in pid file, continue running if the pid is
1810 the same as ours. This occurs on IRIX after a system crash.
1813 kes Extend new GUI API.
1814 kes Make the ua structure a class, and implement send_msg(),
1815 error_msg(), warning_msg(), and info_msg().
1817 kes Apply fix from for building wx-console on the Mac from
1819 kes Implement new select mechanism for GUI programs.
1820 kes Reorganize initialization of stackedWidgets in bat.
1822 kes Add updated nagios plugin supplied by Christian Masopust.
1824 kes More bat implementation.
1825 kes File migrate bug with Pool Occupancy using mediaid instead
1826 of jobids. Fixes bug #795.
1827 kes Fix orphaned buffers in filed backup and verify due to
1828 crypto buffers not freed during errors. Fixes bug #789.
1829 kes Extend new GUI api code to tree commands.
1830 kes Ensure that tree and dot commands check console ACLs.
1831 kes Permit marking directory with trailing slash.
1832 kes Allow 20 console connections (instead of only 10).
1834 kes Add smartctl call to bacula-sd.conf as an example of getting
1837 kes Modify jobq.c to let simultaneous restore jobs run. This may
1838 cause them to fail if they cannot get a drive.
1839 kes Add Client Connect Wait to Storage daemon to permit users to
1840 modify the time the SD waits for a FD connection.
1842 kes Correct virtual changer check which was backwards. This caused
1843 volumes to be unloaded into slots already occupied.
1845 kes Apply Command ACL filter to JobId list in restore command.
1846 kes Correct typeo in var.c patch.
1848 kes Don't let Bacula prune File or Job records for the current Job.
1849 kes Fix variable substitution pad + inc bug reported (with patch)
1852 kes Correct SQLite log table index as reported by Luca Berra.
1854 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1856 kes Begin implementing new comm signals for API.
1857 kes Fix a few places in lib/message.c where the open fd may
1859 kes Continue implementing lib/bsock.c (real class). Make jcr,
1860 who, host, and port private. There are new methods to access
1861 them for non-class use. This required touching a number of files.
1863 kes Add LANG=C to autoconf/randpass so it works with languages other
1864 than English. Fixes bug #788.
1866 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1868 You will not be able to generate Include/Exclude list any more.
1869 It will be fixed soon.
1870 If you want to use this, you can apply
1871 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1873 kes Restore of sockets created false error messages because Bacula
1874 no longer restores sockets, but the code was still trying to
1875 set the attributes on a non-existent file. Reported by a user.
1876 ebl finish RecyclePool feature
1877 Media will takes Pool.RecyclePool
1878 when moving from Scratch to a Pool or when user will do
1879 update volume=xxx frompool
1880 To use it, add RecyclePool = aPool to your Pool resource
1883 RecyclePool = Scratch
1887 kes Expand new BSOCK class adding signal() and new BNET signals.
1888 kes Begin enhancing the dot commands adding a new API function
1889 that returns more information and will make it easier
1890 to interface to the Director from a program.
1892 kes Make DEVICE fd private. Its new name is m_fd, and can be
1893 obtained with dev->fd() outside the class. This is the
1894 first of many DEVICE members to be made private.
1895 kes Implement Michael Renner's idea on having a virtual disk
1896 changer. I made some minor modifications (e.g. I did not
1897 implement the Virtual Changer directive, but simply set
1898 the Changer Command to an empty string.
1900 kes Implement a BSOCK send() method that writes the whole record
1901 in a single write() request rather than in two.
1902 ebl add update volume=xxx recyclepool=yyyy
1903 volume takes recyclepool from pool when using update volume=xxx from pool
1905 kes Fix encryption deblocking bug, which caused some restored files
1906 to be truncated. This fixes bug #763.
1907 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1908 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1910 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1911 ebl Use btime_t instead of uint64_t in media patch.
1913 kes Optimize the use of the database a bit in the Status dir command.
1914 Only open it when needed, ensure that if any previous database
1915 was opened, it is closed.
1917 kes Correct VolCatBytes bug from media patch.
1918 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1919 in the case of orphaned records.
1920 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1921 and File records in 300K chunks to be more efficient. This
1922 idea came from Juan Luis Frances (if I remember right).
1923 kes Apply Eric's scratch patch that moves a purged Volume to
1924 the RecyclePool. Question: how is RecyclePool set? what
1925 happens to the ScratchPool?
1926 kes Apply Eric's media patch that collects read/write media
1927 times as well as byte counts. This patch requires a
1928 simultaneous upgrade of the DIR and SD. Note, there
1929 should be some way to turn off timing. I'm not sure
1930 times are in Bacula units.
1931 kes Apply Eric's batch-insert patch.
1933 kes Update projects list.
1935 kes Implement Include/Exclude file lists in FD as dlists using
1936 the new dlistString class. This permits efficiently having
1937 large include/exclude lists and completes project Item 25.
1938 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1939 console is authorized to cancel the job. This fixes bug
1941 kes Modify SD so that the VolCatJobs medium record is updated
1942 at the beginning of a Job rather than the end. This
1943 fixes bug #775 where exceeding MaxVolJobs caused jobs
1945 kes Added a mutex around getting and setting Volume information
1946 so that multiple simultaneous jobs will single thread.
1948 Switch to using Subversion
1949 kes Remove src/pygtk-console/ from configure
1951 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1952 plus the entrypoints.
1953 kes Apply patch supplied that corrects debug print
1954 in canceling jobs for max run time. Supplied as
1955 part of bug #621, which was previously fixed.
1957 kes Test on job_canceled() and sd_msg_thread_done inside
1958 loop starting the message thread to avoid a race condition.
1960 kes Remove rl_catch_signal from console.c as it conflicted
1961 with the header definition. Fixes bug #765.
1962 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1964 kes Clarify some stored/acquire messages to indicate if the
1965 problem is with read or append.
1967 kes Fix memory leak with storage ids in cats/sql_get.c
1968 kes Terminate watchdog earlier to avoid reference to released
1969 memory -- reported by Jason Austin.
1970 kes Move closing the database from jobq.c to the director daemon
1971 termination routine. This fixes memory leaks for shadow jobs
1972 (i.e. migration jobs).
1973 kes Free up the unique jobid chain items in migrate.c. This fixes
1974 a memory leak problem.
1975 kes Convert some ugly looking for statements to use foreach_alist
1976 in findlib/find.c. This will facilitate converting the structures
1977 to use dlist (for large include/exclude lists).
1978 kes Fix a bug in the btree.c and btree.h routines, then rename them
1979 rblist and add them to be built in src/lib. Include some new
1980 methods written by Rudolf Cejka that make the code more readable
1981 (hides some of the ugly casting).
1982 kes Add set_next() and set_prev() methods which make the code much more
1983 readable. Also add a new dlistString class that facilitates storing
1984 strings in dlists. To be used in the large include/exclude lists.
1985 kes Make some trivial modifications to lib/tree.h that use rblist
1986 rather than dlist for storing the tree links. This was suggested
1987 by Rudolf Cejka. The result of this is that the restore tree now
1988 uses red-black binary trees rather than simple linked lists. This
1989 should give rather dramatic speed improvements for directories
1990 contining large numbers of directories/files (more than 10000).
1992 kes Fix maxruntime bug #621.
1994 ebl Implement the include JobID in spool file name project.
1995 kes Reorder projects file in order determined by Jan 2007 vote.
1996 kes Implement item #12 on project list -- quick release of FD by
1998 kes Fix open of SQLite3 db where user does not have write permission
1999 so that DIR does not crash. Fixes bug #761.
2001 kes Add back missing @ in Win32 Makefile.
2002 kes Change 'Device not configured to autolabel' from INFO
2004 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2005 which should restart an indefinite # of times.
2006 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2007 other DIR specifications.
2009 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2010 Fix path quoting in SQLite scripts.
2011 Fix problems with SHGetFolderPath.
2013 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2015 kes Fix Job restart on error bug that promotes an Inc to a Full
2016 backup. This should fix bug #755.
2017 kes Add qt-console and first cut of code.
2021 kes Fix Bacula->Documentation link on Win32 to point to index.html
2022 instead of bacula.html. Fixed bug #750.
2023 kes Return JobId in db_get_job_record() when JobId==0. This should
2025 kes Do not release source pointers when restarting a failed job.
2027 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2028 This *should* fix bug #747.
2029 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2032 kes Modify USTORE constructor to set an empty store_source string,
2033 and don't copy the store_source string in a cancel. Hopefully
2034 this will fix Arno's seg fault, bug #744.
2035 kes Add back code to disable conio in configure. Fixes bug #743.
2036 kes Correct the Options scanner in the FD to correctly handle
2037 SHA1 option, which was eating the next option. Reported by
2039 kes Add code to indicate when the SD is spooling, spool wait, and
2040 despooling as requested by Alan Brown.
2042 Version 2.0.0 released: 4 January 2007